ALBERT

Description: Fracture shear-dilatancy is an essential process for enhancing the permeability of deep geothermal reservoirs, and is usually accompanied by the radiation of seismic waves. However, the hazard and risk perspective of induced seismicity research typically focuses only on the question of how to reduce the occurrence of induced earthquakes. Here we present a quantitative analysis of seismic hazard as a function of the two key factors defining an enhanced geothermal system: The permeability enhancement, and the size of the stimulated reservoir. Our model has two coupled components: (1) a pressure diffusion model and (2) a stochastic seismicity model. Permeability is increased in the source area of each induced earthquake depending on the amount of slip, which is determined by the magnitude. We show that the few largest earthquakes (i.e. 5–10 events with M ≥ 1.5) contribute more than half of the total reservoir stimulation. The results further indicate that planning and controlling of reservoir engineering operations may be compromised by the considerable variability of maximum observed magnitude, reservoir size, the Gutenberg–Richter b -value and Shapiro's seismogenic index (i.e. a measure of seismic reactivity of a reservoir) that arises from the intrinsic stochastic nature of induced seismicity. We also find that injection volume has a large impact on both reservoir size and seismic hazard. Injection rate and injection scheme have a negligible effect. The impact of site-specific parameters on seismicity and reservoir properties is greater than that of the injected volume. In particular, conditions that lead to high b -values—possibly a low differential stress level—have a high impact on seismic hazard, but also reduce the efficiency of the stimulation in terms of permeability enhancement. Under such conditions, target reservoir permeability can still be achieved without reaching an unacceptable level of seismic hazard, if either the initial reservoir permeability is high or if several fractures are stimulated. The proposed methodology is a first step towards including induced seismic hazard analysis into the design of reservoir stimulation in a quantitative and robust manner.