ISSN:
1089-7550
Source:
AIP Digital Archive
Topics:
Physics
Notes:
Low-temperature deposition of TiN by reactive evaporation or sputter deposition onto amorphous substrates leads to highly underdense layers which develop mixed 111/002 orientations through competitive growth. In contrast, we demonstrate here the growth of low-temperature (450 °C) fully dense polycrystalline TiN layers with complete 111 texture. This was achieved by reactive magnetron sputter deposition using a combination of: (1) highly oriented 25-nm-thick 0002 Ti underlayers to provide 111 TiN orientation through texture inheritance (local epitaxy) and (2) high flux (JN2+/JTi=14), low-energy (EN2+(similar, equals)20 eV), N2+ ion irradiation in a magnetically unbalanced mode to provide enhanced adatom diffusion leading to densification during TiN deposition. The Ti underlayers were also grown in a magnetically unbalanced mode, in this case with an incident Ar+/Ti flux ratio of 2 and EAr+(similar, equals)11 eV. All TiN films were slightly overstoichiometric with a N/Ti ratio of 1.02±0.03. In order to assess the diffusion-barrier properties of dense 111-textured TiN, Al overlayers were deposited without breaking vacuum at 100 °C. Al/TiN bilayers were then annealed at a constant ramp rate of 3 °C s−1 to 650 °C s−1 and the interfacial reaction between Al and TiN was monitored by in situ synchrotron x-ray diffraction measurements. As a reference point, we find that interfacial Al3Ti formation is observed at 450 °C in Al/TiN bilayers in which the TiN layer is deposited directly on SiO2 in a conventional magnetically balanced mode and, hence, is underdense with a mixed 111/002 orientation. However, the onset temperature for interfacial reaction was increased to 610 °C in bilayers with fully dense TiN exhibiting complete 111 preferred orientation. © 1999 American Institute of Physics.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1063/1.371271
