ISSN:
0930-7516
Keywords:
Chemistry
;
Industrial Chemistry and Chemical Engineering
Source:
Wiley InterScience Backfile Collection 1832-2000
Topics:
Chemistry and Pharmacology
,
Process Engineering, Biotechnology, Nutrition Technology
Notes:
A turntable dynamometer has been constructed for the accurate measurement of power input and mixing applications in bench stirred tank reactors. The main feature of this device is a pneumatic bearing with complementary conical parts. The conical pneumatic bearing permitted to apply eccentric loads without affecting its stability. The static friction torque in the pneumatic bearing was very small, 4 × 10-4 Nm, and can be neglected in the experimental ranges of measured torques, i.e. from 5 × 10-3 to 2.21 Nm. In accordance with the instrumentation used, the deviations obtained with the apparatus are less than 10% at low torque readings. At moderate torques, deviations lower than 1% are routinely obtained. Several power input measurements show that the obtained data scatter is lower than 2.5%. The power input response in the turbulent regime is in agreement with dimensional analysis: the power input depends on the cube of the impeller speed. In addition, data obtained with a turbine impeller under ungassed conditions agree with the predictions of a published correlation, which takes into account several geometrical parameters.
Additional Material:
4 Ill.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1002/ceat.270140206
