ALBERT

Beschreibung: Capillary rise experiments (spontaneous imbibition tests) were conducted in the laboratory with ultrasonic and X-ray monitoring on the Sherwood sandstone and the Majella grainstone. The aim was to provide a direct comparison between the variation in seismic attributes (amplitude, velocity, spectral content, energy) and the actual fluid distribution in the rock . Two pairs of ultrasonic P-wave sensors located at different heights on a cylindrical rock specimen recorded every five seconds the waveforms when capillary forces make water rise up into the rock from the bottom in contact with a water tank. Simultaneously CT-scan images of a vertical cross-section were also recorded. Two important results were found. (i) The amplitude of the first P-wave arrival is impacted by the upward moving fluid front before the P-wave velocity is, while the fluid front has not yet reached the sensors level. In contrast the P-wave velocity decreases when the fluid front reaches the Fresnel clearance zone. The spectral analysis of the waveforms shows that the peak frequency amplitude is continuously decreasing without noticeable frequency shift. (ii) A methodology based on the calculation of the analytical signal and instantaneous phase was designed to decompose each waveform into discrete wavelets associated with direct or reflected waves. The energy carried by the wavelets is very sensitive to the fluid substitution process: the coda wavelets related to reflections on the bottom end face of the specimen are impacted as soon as imbibition starts and can be used as a precursor for the arriving fluid.