Publication Date:
2019-07-13
Description:
A gear tooth temperature analysis was performed using a finite element method combined with a calculated heat input, calculated oil jet impingement depth, and estimated heat transfer coefficients. Experimental measurements of gear tooth average surface temperatures and instanteous surface temperatures were made with a fast response infrared radiometric microscope. Increased oil jet pressure had a significant effect on both average and peak surface temperatures at both high load and speeds. Increasing the speed at constant load and increasing the load at constant speed causes a significant rise in average and peak surface temperatures of gear teeth. The oil jet pressure required for adequate cooling at high speed and load conditions must be high enough to get full depth penetration of the teeth. Calculated and experimental results were in good agreement with high oil jet penetration but showed poor agreement with low oil jet penetration depth.
Keywords:
MECHANICAL ENGINEERING
Type:
NASA-TM-81419
,
E-342
,
Intern. Power Transmission and Gearing Conf.; Aug 18, 1980 - Aug 22, 1980; San Francisco, CA; United States
Format:
application/pdf
