ISSN:
1752-1688
Source:
Blackwell Publishing Journal Backfiles 1879-2005
Topics:
Architecture, Civil Engineering, Surveying
,
Geography
Notes:
: Four dam-break models were selected for testing with an observed data set from the November 6, 1977, disaster at Toccoa Falls, Georgia. The Kelly Barnes Dam failure occurred with a 35-ft head of water and produced a peak discharge of 23,000 ft3/s. The selected models included: (1) Modified Puls (MP), (2) U. S. Army Corps of Engineers Gradually Varied Unsteady Flow Profiles (USTFLO), (3) National Weather Service's Dam-Break Flood Forecast (DBFF), and (4) U. S. Geological Survey's method of characteristics (MOC) coupled with a general purpose streamflow simulation (J879DB). Achieving a successful simulation was easiest with the MP model. The DBFF model required a moderate effort while the MOC-J879DB models required some data alterations and considerable effort. The USTFLO model failed to simulate this test case. In the stream segment near the dam, the computed peak stages were generally within 5 feet of the observed high water marks. Elsewhere, the peak stage results were much better, generally within 2 feet. The peak discharges computed by the models were generally within 20 percent of discharges estimated by slope area and contracted opening measurements, except near the dam where the MOC-J879DB model's results was 80 percent too high.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1111/j.1752-1688.1980.tb02546.x
