ISSN:
1089-7623
Source:
AIP Digital Archive
Topics:
Physics
,
Electrical Engineering, Measurement and Control Technology
Notes:
We describe a radical design for a bolometer system employing infrared (IR) imaging of a segmented-matrix absorber in a cooled-pinhole camera geometry, which we will prototype and demonstrate on the large helical device (LHD).1 LHD will be operational in early 1998, with an l=2 superconducting winding, a major radius of 3.9 m, a minor radius of 0.5–0.65 m, and input powers ranging from 3 MW (steady state) to 30 MW (pulsed). The bolometer design parameters are determined by modeling the temperature of the foils making up the detection matrix using a two-dimensional time-dependent solution of the heat conduction equation. This design will give a steady-state bolometry capability, with modest (60 Hz) time resolution, while simultaneously providing hundreds of channels of spatial information. No wiring harnesses will be required, as the temperature-rise data is measured via a 12-bit, ±0.025 °C resolution, 3–5 μm band, 256×256 pixel IR camera. The spatial data will be used to tomographically invert the profile of the highly shaped stellarator main plasma and divertor radiation, in conjunction with more conventional fanned arrays of traditional bolometers.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1063/1.1147693
