ISSN:
0032-3888
Keywords:
Chemistry
;
Chemical Engineering
Source:
Wiley InterScience Backfile Collection 1832-2000
Topics:
Chemistry and Pharmacology
,
Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
,
Physics
Notes:
One of the major factors of concern in compression molding of fiber-reinforced thermosets is the mold cycle time which directly affects the processing cost. An ideal system would be the one which cures in a relatively short time resulting in excellent mechanical and physical properties. However, in practice, a compromise has to be made between the mold cycle time and ultimate property requirements. The effects of cure cycle time, temperature, preheating and post-cooling on mechanical properties of continuous as well as chopped glass fiber reinforced polyester and vinyl ester systems involving 1/4 to 1 in thick sections have been studied. Mold cycle time is strongly influenced by the part thickness and mold temperature. Internal heat generation due to curing reaction causes high thermal gradients across the thickness. Preheating offers advantages of reducing both the mold cycle time and the thermal gradient. The flexural and interlaminar shear strengths are strongly dependent or, the mold cycle time. Maximum strengths are obtained when the mold is opened at the instant when there is no thermal gradient across the thickness.
Additional Material:
10 Ill.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1002/pen.760191103