ISSN:
0947-5117
Keywords:
Chemistry
;
Polymer and Materials Science
Source:
Wiley InterScience Backfile Collection 1832-2000
Topics:
Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
Description / Table of Contents:
Investigations of the corrosion fatigue behaviour at a super pure martensitic stainless steel X5CrNiCuNb 17 4 PH in comparison to the soft martensitic stainless steel X4CrNiMo 16 5 1 ESR in chloride containing aqueous media - Part 2: Corrosion fatigue tests and crack initiation mechanismsThe following report concerns the study of the corrosion fatigue behaviour of the soft martensitic steel X4CrNiMo 16 5 1 ESR and the precipitation hardened X5CrNiCuNb 17 4 PH in sodium solution in the temperature range between 20° and 150 °C and the determination of their general corrosion properties and the mechanism of crack propagation. Their corrosion fatigue limits were compared with each other. A comparision was also made between an electro-slag-remelted soft martensitic steel and a charge without an ESR aftertreatment. Microfractographical fracture and crack path investigation were carried out for interpretation of the experimental results.It was observed that in both super pure steels (soft martensitic and precipitation hardened) the oxidic inclusions are not responsible for the crack intiation, as it was found in the non ESR treated steels. In the 17-4 PH steel copper containing inclusions in the crack initiation areas were observed. In concentrated sodium solution pitting corrosion was found at both steels.
Notes:
Untersuchungen zum Schwingungsrißkorrosionsverhalten des weichmartensitischen Stahles X4CrNiMo 16 5 1 ESU und des Martensitaushärters X5CrNiCuNb 17 4 PH in NaCl-haltigen Lösungen im Temperaturbereich zwischen 20° und 150 °C. Bestimmung der Korrosionseigenschaften und der Rißeinleitungsmechanismen. Vergleich zwischen einem Elektro-Schlacke-umgeschmolzenen Weichmartensiten und einer Charge, die nicht ESU-behandelt worden ist. Mikrofraktographische Bruch- und Rißverlaufsbeurteilung zur Deutung der Versuchsergebnisse.Die fraktographischen Untersuchungen ergaben, daß bei dem hochreinen weichmartensitischen und dem martensitaushärtenden Stahl oxidische Einschlüsse bei der Rißeinleitung keine Rolle spielen. Beim martensitaushärtenden Stahl wurden Cu-haltige Einschlüsse im Rißausgangsbereich nachgewiesen. In konzentrierter Salzlösung trat bei beiden Stählen Lochfraß auf, der rißinitiierend wirkte.
Additional Material:
17 Ill.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1002/maco.19890400704
