ALBERT

All Library Books, journals and Electronic Records Telegrafenberg

X
feed icon rss

Ihre E-Mail wurde erfolgreich gesendet. Bitte prüfen Sie Ihren Maileingang.

Leider ist ein Fehler beim E-Mail-Versand aufgetreten. Bitte versuchen Sie es erneut.

Vorgang fortführen?

Exportieren
Filter
  • Artikel  (14.228)
  • Springer Nature  (11.624)
  • Oxford University Press
  • Blackwell Publishing Ltd
  • American Meteorological Society
  • Maschinenbau  (14.228)
Sammlung
Datenquelle
Schlagwörter
Verlag/Herausgeber
Erscheinungszeitraum
Zeitschrift
Thema
  • 1
    Digitale Medien
    Digitale Medien
    Elastic Properties of Nickel-Based Anodes for Solid Oxide Fuel Cells as a Function of the Fraction of Reduced NiO (2004)
    Oxford, UK : Blackwell Publishing Ltd
    Journal of the American Ceramic Society 87 (2004), S. 0 
    Details
    ISSN: 1551-2916
    Quelle: Blackwell Publishing Journal Backfiles 1879-2005
    Thema: Maschinenbau , Physik
    Notizen: The changes in porosity and elastic moduli of YSZ-containing nickel-based anode materials for solid oxide fuel cells were studied as a function of the fraction of reduced NiO. Anode samples were reduced in a gas mixture of 4% hydrogen and 96% argon for different periods of time at 800°C and their Young's and shear moduli were determined afterward at room temperature using resonant ultrasound spectroscopy and impulse excitation. It was found that the magnitude of Young's and shear moduli decreased significantly with increasing fraction of reduced NiO and that the magnitude of the elastic moduli of a fully reduced Ni–YSZ anode was ∼45% lower than that of unreduced NiO–YSZ. Because the elastic moduli of NiO are close to those of Ni, the observed decrease in the magnitude of the elastic moduli was found to be caused mainly by the significant increase in the porosity of the sample as a result of NiO reduction. Expressions are presented for the amount of porosity and the magnitude of the elastic moduli as a function of the fraction of reduced NiO.
    Materialart: Digitale Medien
    URL: http://dx.doi.org/10.1111/j.1151-2916.2004.tb07499.x
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
    Artikel (Nationallizenzen)
    Volltext
  • 2
    Digitale Medien
    Digitale Medien
    Manufacturing SiC-Fiber-Reinforced SiC Matrix Composites by Improved CVI/Slurry Infiltration/Polymer Impregnation and Pyrolysis (2004)
    Oxford, UK : Blackwell Publishing Ltd
    Journal of the American Ceramic Society 87 (2004), S. 0 
    Details
    ISSN: 1551-2916
    Quelle: Blackwell Publishing Journal Backfiles 1879-2005
    Thema: Maschinenbau , Physik
    Notizen: Two- and three-dimensional SiCr/SiC composites have been prepared starting from Tyranno SA(tm) fiber preforms. Preform densification has been performed by a modified preceramic polymer impregnation and pyrolysis (PIP) process consisting of filling the preform large interbundle voids with SiC powder before the PIP process. This step was accomplished by low-pressure infiltration of a SiC powder dilute slurry through the preform thickness. Specimens were further processed with polymer impregnation and pyrolysis to determine the effects on structural, thermal, and mechanical properties of the obtained composites. High-temperature pyrolysis treatment, which promoted polymer derived SiC matrix crystallization, markedly increased thermal diffusivity.
    Materialart: Digitale Medien
    URL: http://dx.doi.org/10.1111/j.1551-2916.2004.tb20093.x
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
    Artikel (Nationallizenzen)
    Volltext
  • 3
    Digitale Medien
    Digitale Medien
    Fourier-Transform Infrared Spectrometry Measurement of Emissions Concentration from Glass Manufacturing (2004)
    Oxford, UK : Blackwell Publishing Ltd
    Journal of the American Ceramic Society 87 (2004), S. 0 
    Details
    ISSN: 1551-2916
    Quelle: Blackwell Publishing Journal Backfiles 1879-2005
    Thema: Maschinenbau , Physik
    Notizen: Carbon is commonly added to sulfate-fined silicate-glass batches to enhance the fining process. Reactions between carbon and Na2SO4 modify the SOx emissions from Na2SO4 decomposition. Fourier-transform infrared (FTIR) spectrometry is used to analyze the emission of air pollutants from the isothermal decomposition of Na2SO4 + C undertaken using thermogravimetric analysis (TGA). The FTIR spectrometer is calibrated using standard gas mixtures containing CO, CO2, SO2, NO, and NO2. The collected spectra are quantified using the classical least-squares (CLS) approximation. The TGA-FTIR system provides SOx, and COx, concentrations versus time data from the isothermal decomposition of Na2SO4, in the presence of a carbon black. Mass spectrometry (MS) complements FTIR by being able to detect SO(g).
    Materialart: Digitale Medien
    URL: http://dx.doi.org/10.1111/j.1551-2916.2004.tb20094.x
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
    Artikel (Nationallizenzen)
    Volltext
  • 4
    Digitale Medien
    Digitale Medien
    Reexamination of the Role of SrMoO4 in the Enhancement of the Low-Field Magnetoresistance of Sr2FeMoO6 (2004)
    Oxford, UK : Blackwell Publishing Ltd
    Journal of the American Ceramic Society 87 (2004), S. 0 
    Details
    ISSN: 1551-2916
    Quelle: Blackwell Publishing Journal Backfiles 1879-2005
    Thema: Maschinenbau , Physik
    Notizen: Different ratios of the precursor phases of SrFeO3–x (SFO) and SrMoO4 (SMO) were used to prepare Sr2FeMoO6 (SFMO) by a solid-state reaction. X-ray diffraction was used to identify the phases. A residual SMO was observed to exist in the sample with an SFO/SMO ratio of 0.9:1. The sample with a residual SMO phase had higher resistivity, lower magnetization, but higher low-field magnetoresistance (LFMR). High-resolution transmission electron microscopy was used to identify the compositions and phases. Nanometer-sized amorphous-like clusters of SMO phase were located inside the grains rather than at grain boundaries; however, some boundaries were rich in the strontium ion. The possible mechanisms for the conduction and the increase of LFMR of SFMO are discussed.
    Materialart: Digitale Medien
    URL: http://dx.doi.org/10.1111/j.1551-2916.2004.tb20098.x
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
    Artikel (Nationallizenzen)
    Volltext
  • 5
    Digitale Medien
    Digitale Medien
    Nanoindentation Characterization of Submicro- and Nano-Sized Liquid-Phase-Sintered SiC Ceramics (2004)
    Oxford, UK : Blackwell Publishing Ltd
    Journal of the American Ceramic Society 87 (2004), S. 0 
    Details
    ISSN: 1551-2916
    Quelle: Blackwell Publishing Journal Backfiles 1879-2005
    Thema: Maschinenbau , Physik
    Notizen: Submicro- and nano-sized liquid-phase-sintered SiC ceramics were mechanically tested by nanoindentation in the peak load range 5–400 mN. The submicro-sized sample showed a marked indentation size effect which the nano-sized samples did not exhibit. The relevance of indentation depth with respect to the microstructural scale has been outlined. In the investigated grain-size range, the hardness dependence on the grain size could be described by a load-dependent inverse Hall–Petch relation. Young's modulus was less microstructure- and load-dependent. Because of the very fine microstructure, the nano-sized SiC materials gave lower elastic values than the submicro-sized SiC ceramic.
    Materialart: Digitale Medien
    URL: http://dx.doi.org/10.1111/j.1151-2916.2004.tb06366.x
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
    Artikel (Nationallizenzen)
    Volltext
  • 6
    Digitale Medien
    Digitale Medien
    Insulating Properties of Lanthanum-Doped BaTiO3 Ceramics Prepared by Low-Temperature Synthesis (2004)
    Oxford, UK : Blackwell Publishing Ltd
    Journal of the American Ceramic Society 87 (2004), S. 0 
    Details
    ISSN: 1551-2916
    Quelle: Blackwell Publishing Journal Backfiles 1879-2005
    Thema: Maschinenbau , Physik
    Notizen: Samples of composition Ba1−xLaxTi1−x/4O3, x= 0, 0.003, 0.03, and 0.10, were prepared by an alkoxide sol–gel route with final firing of ceramics at 1100°C, 2 h in air. All samples showed bulk insulating behavior with no evidence of semiconductivity caused by either direct donor doping or oxygen loss.
    Materialart: Digitale Medien
    URL: http://dx.doi.org/10.1111/j.1151-2916.2004.tb06370.x
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
    Artikel (Nationallizenzen)
    Volltext
  • 7
    Digitale Medien
    Digitale Medien
    CORRECTION (2004)
    Oxford, UK : Blackwell Publishing Ltd
    Journal of the American Ceramic Society 87 (2004), S. 0 
    Details
    ISSN: 1551-2916
    Quelle: Blackwell Publishing Journal Backfiles 1879-2005
    Thema: Maschinenbau , Physik
    Materialart: Digitale Medien
    URL: http://dx.doi.org/10.1111/j.1151-2916.2004.tb06375.x
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
    Artikel (Nationallizenzen)
    Volltext
  • 8
    Digitale Medien
    Digitale Medien
    Cement Composition Effects on the Rheological Property Evolution in Concentrated Cement–Polyelectrolyte Suspensions (2004)
    Oxford, UK : Blackwell Publishing Ltd
    Journal of the American Ceramic Society 87 (2004), S. 0 
    Details
    ISSN: 1551-2916
    Quelle: Blackwell Publishing Journal Backfiles 1879-2005
    Thema: Maschinenbau , Physik
    Notizen: We have studied the rheological property evolution and hydration behavior of white and ordinary portland cement (type I) pastes and concentrated cement–polyelectrolyte suspensions. Cement composition had a marked effect on the elastic property evolution (G′(t)) and hydration behavior of these suspensions in the presence of poly(acrylic acid)/poly(ethylene oxide) copolymer (PAA/PEO), even though their affinity to adsorb such species was nearly identical. Both white and ordinary portland cement pastes exhibited G′0 values of ∼104 Pa and fully reversible G′(t) behavior until the onset of the acceleratory period (t= 2 h), where the pastes stiffened irreversibly. In contrast, cement–PAA/PEO suspensions exhibited G′0 values of ∼1 Pa and G′(t) behavior comprised of both reversible and irreversible features. Interestingly, ordinary portland cement–PAA/PEO suspensions experienced a gel-to-fluid transition on high shear mixing at short hydration times (〈1 h), and the particle network did not rebuild until ∼24 h of hydration. In sharp contrast, white portland cement–PAA/PEO suspensions remained weakly gelled throughout the initial stage of hydration even after high shear mixing. At longer hydration times (〉1 h), both cement–PAA/PEO suspensions exhibited G′i(t) ∼ exp(t/τc) with τc values of 5.6 and 1.3 h for ordinary and white portland cement, respectively. Our observations suggest that hydration phenomena impact interparticle forces during early stage hydration and, ultimately, lead to initial setting through the formation of solid bridges at the contact points between particles within the gelled network.
    Materialart: Digitale Medien
    URL: http://dx.doi.org/10.1111/j.1151-2916.2004.tb06327.x
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
    Artikel (Nationallizenzen)
    Volltext
  • 9
    Digitale Medien
    Digitale Medien
    New Freeze-Casting Technique for Ceramics with Sublimable Vehicles (2004)
    Oxford, UK : Blackwell Publishing Ltd
    Journal of the American Ceramic Society 87 (2004), S. 0 
    Details
    ISSN: 1551-2916
    Quelle: Blackwell Publishing Journal Backfiles 1879-2005
    Thema: Maschinenbau , Physik
    Notizen: A new ceramic freeze-casting technique capable of manufacturing near room temperature with a sublimable vehicle was accomplished. Fluid-concentrated slurries of Al2O3 powder in molten camphene (C10H16) were prepared at 55°C. These slurries were quickly solidified (frozen) at room temperature to yield rigid solid green bodies, followed by frozen camphene removal by sublimation (freeze-drying) with negligible shrinkage. Sintering without any special binder burnout process yielded sintered bodies with over 98% theoretical density. The proposed advantages include (1) elimination of extremely cold temperatures, (2) elimination of troublesome binder burnout process, and (3) fast manufacturing cycle due to quick solidification.
    Materialart: Digitale Medien
    URL: http://dx.doi.org/10.1111/j.1151-2916.2004.tb06331.x
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
    Artikel (Nationallizenzen)
    Volltext
  • 10
    Digitale Medien
    Digitale Medien
    Reactive Hot Pressing of Titanium Nitride–Titanium Diboride Composites at Moderate Pressures and Temperatures (2004)
    Oxford, UK : Blackwell Publishing Ltd
    Journal of the American Ceramic Society 87 (2004), S. 0 
    Details
    ISSN: 1551-2916
    Quelle: Blackwell Publishing Journal Backfiles 1879-2005
    Thema: Maschinenbau , Physik
    Notizen: Dense composites in the Ti-B-N system have been produced by reactive hot pressing of titanium and BN powders. The effect of the addition of a small amount of nickel (1–3 wt%) on the reaction kinetics and densification of TiN–TiB2 (40 vol%) composite has been studied. Composites of ∼99% of theoretical density have been produced at 1600°C under 40 MPa for 30 min with 1% nickel. The hardness and fracture toughness of these composites are 24.5 ± 0.97 GPa and 6.53 ± 0.27 MPa·m1/2, respectively. The microstructural studies on samples produced at lower temperatures indicate the formation of a transient liquid phase, which enhances the kinetics of the reaction and densification of the composite.
    Materialart: Digitale Medien
    URL: http://dx.doi.org/10.1111/j.1151-2916.2004.tb06333.x
    Standort Signatur Erwartet Verfügbarkeit
    BibTip Andere fanden auch interessant ...
    Artikel (Nationallizenzen)
    Volltext
Schließen ⊗
Diese Webseite nutzt Cookies und das Analyse-Tool Matomo. Weitere Informationen finden Sie hier...