ALBERT

All Library Books, journals and Electronic Records Telegrafenberg

X
feed icon rss

Your email was sent successfully. Check your inbox.

An error occurred while sending the email. Please try again.

Proceed reservation?

Export
Filter
  • INSTRUMENTATION AND PHOTOGRAPHY  (249)
  • 1995-1999
  • 1980-1984
  • 1975-1979  (249)
  • 1976  (249)
Collection
Keywords
Years
  • 1995-1999
  • 1980-1984
  • 1975-1979  (249)
Year
  • 1
    facet.materialart.
    Unknown
    A combined boundary-profile and automated data-reduction and analysis system (1976)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: A portable boundary-layer meteorological data-acquisition and analysis system is described which employs a small tethered balloon and a programmable calculator. The system is capable of measuring pressure, wet- and dry-bulb temperature, wind speed, and temperature fluctuations as a function of height and time. Other quantities, which can be calculated in terms of these, can also be made available in real time. All quantities, measured and calculated, can be printed, plotted, and stored on magnetic tape in the field during the data-acquisition phase of an experiment.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Boundary-Layer Meteorology; 10; Aug. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 2
    facet.materialart.
    Unknown
    Reconstructing color images of astronomical objects using black and white spectroscopic emulsions (1976)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: A color photograph of the peculiar elliptical galaxy NGC 5128 (Centaurus A) has been reconstructed from three Kodak 103a emulsion type photographs by projecting positives of the three B&W plates through appropriate filters onto a conventional color film. The resulting photograph shows color balance and latitude characteristics superior to color photographs of similar astronomical objects made with commercially available conventional color film. Similar results have been obtained for color reconstructed photographs of the Large and Small Magellanic Clouds. These and other results suggest that these projection-reconstruction techniques can be used to obtain high-quality color photographs of astronomical objects which overcome many of the problems associated with the use of conventional color film for the long exposures required in astronomy.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Journal of Applied Photographic Engineering; 2; Spring 1
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 3
    facet.materialart.
    Unknown
    Testing of a photoelectric photometer. 2: Observational testing (1976)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The versatility is demonstrated of the 41 cm. Tortugas reflector's photoelectric system through observations of V566 Oph and R CrB with four associated AAVSO comparison stars. These observations were made between May and October, 1974.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Contrib. of the Observatory of N. Mex. State Univ., Vol. 1, No. 4; p 154-158
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 4
    facet.materialart.
    Unknown
    Large-area multi-crystal NaI/Tl/ detectors for X-ray and gamma-ray astronomy (1976)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: An array of large multicrystal NaI(Tl) detectors was constructed and used in a balloon-borne experiment to observe weak transient bursts of cosmic origin. The array had an active area of about 1 sq m and was sensitive to photons above 50 keV. Localized bursts which were observed are attributed to long-lived phosphorescence following large energy deposits by cosmic rays in the crystals.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Nuclear Instruments and Methods; 140; 1976
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 5
    facet.materialart.
    Unknown
    CCD correlation techniques (1976)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: Two CCD techniques were discussed for performing an N-point sampled data correlation between an input signal and an electronically programmable reference function. The design and experimental performance of an implementation of the direct time correlator utilizing two analog CCDs and MOS multipliers on a single IC were evaluated. The performance of a CCD implementation of the chirp z transform was described, and the design of a new CCD integrated circuit for performing correlation by multiplication in the frequency domain was presented. This chip provides a discrete Fourier transform (DFT) or inverse DFT, multipliers, and complete support circuitry for the CCD CZT. The two correlation techniques are compared.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: JPL Conf. on Charge-Coupled Device Technol. and Appls.; 6 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 6
    facet.materialart.
    Unknown
    RECON 6: A real-time, wide-angle, solid-state reconnaissance camera system for high-speed, low-altitude aircraft (1976)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: The maturity of self-scanned, solid-state, multielement photosensors makes the realization of "real time" reconnaissance photography viable and practical. A system built around these sensors which can be constructed to satisfy the requirements of the tactical reconnaissance scenario is described. The concept chosen is the push broom strip camera system -- RECON 6 -- which represents the least complex and most economical approach for an electronic camera capable of providing a high level of performance over a 140 deg wide, continuous swath at altitudes from 200 to 3,000 feet and at minimum loss in resolution at higher altitudes.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: JPL Conf. on Charge-Coupled Device Technol. and Appls.; p 129-134
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 7
    facet.materialart.
    Unknown
    High data rate performance of a BCCD for rapid scan imaging (1976)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: A commercially available 1728 element shallow bulk channel CCD line array was clocked at output data rates up to 30 MHz. Temporal noise was near 200 electrons and was largely independent of clock rate. Charge transfer efficiency was in excess of 0.9999 at 30 MHz. Utilization is feasible for visual simulation and aerial mapping.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: JPL Conf. on Charge-Coupled Device Technol. and Appls.; p 72-82
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 8
    facet.materialart.
    Unknown
    Development of large area CCD imagers (1976)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: High performance CCD imagers with 800 x 50 resolution elements were fabricated using a coplanar, double polysilicon, electrode system. The imager was developed as a prototype to demonstrate the feasibility of an 800 x 800 array for application to deep space photography where data rates of 10K to the 2nd power and operating temperatures of -40 C are required. The performance is discussed and comparisons made to the existing 400 x 400 imager.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: JPL Conf. on Charge-Coupled Device Technol. and Appls.; 3 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 9
    facet.materialart.
    Unknown
    Improved acoustic viscosimeter technique (1976)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: An improved technique has been developed for studies of the shear viscosity of fluids. It utilizes an acoustic resonator as a four-terminal electrical device; the resonator's amplitude response may be determined directly and simply related to the fluid's viscosity. The use of this technique is discussed briefly and data obtained in several fluids is presented.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Acoustical Society of America; vol. 60
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 10
    facet.materialart.
    Unknown
    Photographic image intensification by autoradiography (1976)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: Images on developed photographic emulsions can be significantly intensified by making the image silver radioactive and exposing a second emulsion to this radiation. Because the print, an autoradiograph, reproduces the original with significant increases in density and contrast, the method can be used to enhance underexposed emulsions and to increase the limits of photographic detection. This paper reports a new, practical chemical method for activating the silver, using thiourea labeled with sulfur-35, a process convenient for use in photographic laboratories. Speed increases of 13 and contrast increases of 18 were achieved with Kodak Plus-X film in this initial phase.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Applied Optics; 15; Nov. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 11
    facet.materialart.
    Unknown
    Charge coupled device integration-time coding for detection of images moving with unknown velocities (1976)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: Existing techniques for the detection of a moving low light level image by a CCD array have required velocity synchronism between the image and the photogenerated charges. This was necessary to prevent blurring during the long duration of charge integration. A new detection scheme is described which causes the image to be convolved with a clock modulation signal as the photocharges are collected. The charge accumulating from each image point will now be spread over many photoelements due to the absence of velocity synchronism, but the output is not blurred in the usual sense. Instead the charge is distributed through the array in a controlled way so that the image can be reconstructed.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: JPL Conf. on Charge-Coupled Device Technol. and Appls.; p 139-144
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 12
    facet.materialart.
    Unknown
    Recent progress in photoelectron image detection with CCDs (1976)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: Intensified CCDs (ICCDs) were built and operated. These ICCDs were electrostatically and magnetically-focussed image tubes which use CCDs as anodes. The ICCDs detected single photoelectrons, and have electron gain very near that which was predicted. The first single-pixel pulse-height distributions were presented, and the leakage current was shown to increase as a function of photoelectron irradiation. The advantages and disadvantages of front- and rear-illuminated designs were discussed in light of differing applications requirements.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: JPL Conf. on Charge-Coupled Device Technol. and Appls.; p 101-105
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 13
    facet.materialart.
    Unknown
    Low-noise video amplifiers for imaging CCD's (1976)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: Various techniques were developed which enable the CCD (charge coupled device) imaging array user to obtain optimum performance from the device. A CCD video channel was described, and detector-preamplifier interface requirements were examined. A noise model for the system was discussed at length and laboratory data presented and compared to predicted results.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: JPL Conf. on Charge-Coupled Device Technol. and Appls.; p 83-88
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 14
    facet.materialart.
    Unknown
    Si/Li/ X-ray astronomical spectroscopy (1976)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The principles of operation of solid state nondispersive spectrometers are reviewed. Si(Li) is shown to be the preferred nondispersive X-ray spectrometer because of its inherent resolution advantages and its adaptability to the constraints and philosophy of the HEAO-B observatory. A schematic diagram is presented of the geometry of the HEAO-B solid state detector assembly as a block diagram of the primary logic mode of the HEAO-B X-ray spectrometer.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 15
    facet.materialart.
    Unknown
    Development of a water vapor radiometer to correct for tropospheric range delay in DSN applications (1976)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The rationale for a Water Vapor Radiometer (WVR) as an aid in predicting tropospheric delay correction is presented. Included is a block diagram and a description of the present developmental WVR with the semiautomated operating sequence outlined. A brief summary of field tests at El Monte airport and Pt. Mugu is given.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: The Deep Space Network; p 77-84
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 16
    facet.materialart.
    Unknown
    Mechanical testing - In situ fracture device for Auger electron spectroscopy (1976)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: An in situ fracture device for Auger spectroscopy is described. The device is designed to handle small tensile specimens or small double-cantilever beam specimens and is fully instrumented with load and displacement transducers so that quantitative stress-strain measurements can be made directly. Some initial test results for specimens made from 4130 and 1020 steel are presented. Results indicate that impurity segregation at interfaces other than grain boundary may play a significant role in the mechanism of ductile fracture.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Review of Scientific Instruments; 47; Apr. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 17
    facet.materialart.
    Unknown
    Sensitivity of an astronomical infrared heterodyne spectrometer (1976)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The factors determining the sensitivity of a real astronomical heterodyne spectrometer are described. The deviation from the ideal heterodyne system for line detection is described in terms of a series of degradation factors. A discussion of degradation due to a low local oscillator power and to line profile detection is presented. Representative values for the degradation factors are given. Even with a total degradation of not less than 30, the heterodyne spectrometer is still found to be a highly sensitive tool in IR astronomy.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 18
    facet.materialart.
    Unknown
    Infrared upconversion for astronomical applications (1976)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The performance of an upconversion system is examined for observation of astronomical sources in the low to middle IR spectral range. Theoretical values for the performance parameters of an upconversion system for astronomical observations are evaluated in terms of the conversion efficiencies, spectral resolution, field of view minimum detectable source brightness, and source flux. Experimental results of blackbody measurements and molecular absorption-spectrum measurements using a lithium niobate upconverter with an argon-ion laser as the pump are presented. Estimates are given of the expected optimum sensitivity of an upconversion device that may be built with presently available components.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Applied Optics; 15; Apr. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 19
    facet.materialart.
    Unknown
    Upconversion spectrometry for astrophysical applications (1976)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Black body measurements and absorption spectra of methane near 3.3 microns are presented and used as examples in a discussion of upconversion spectrometry for astrophysical application. Factors determining the system conversion efficiency and the minimum detectable flux for a typical system are presented. The spectrometer described uses an Argon-ion laser and a temperature turned LiNbO3 crystal in a CW mode. Satisfactory agreement between measured and calculated performance parameters is obtained. An estimate of the highest performance parameters attainable using current technology is given.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 20
    facet.materialart.
    Unknown
    Effect of velocity gradients on measurements of turbulent shear stress (1976)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Experiments were carried out to evaluate the effects of normal velocity gradients on hot wire measurements in a subsonic boundary layer of the same size as the flow investigated by Johnson and Rose (1975). Both hot wire and film anemometers were used to measure the turbulent properties of the boundary layer. A special X-wire probe with one wire vertical and the other at an angle of about 40 deg to the flow was used to demonstrate the gradient effects. The results indicate that major errors are encountered when mean and turbulent velocity gradients exist along the length of hot wire sensors, the problem being more pronounced at high speeds. Although the split film sensor results show a significant improvement over the X-wire sensor, further reduction in the space resolution of sensors by roughly an order of magnitude would appear to be necessary to reduce the error to acceptable values near the wall.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: AIAA Journal; 14; Mar. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 21
    facet.materialart.
    Unknown
    Experimental design of laminar proportional amplifiers (1976)
    In:  CASI
    Details
    Publication Date: 2012-05-19
    Description: An experimental program was initiated at Langley Research Center to study the effects of various parameters on the design of laminar proportional beam deflection amplifiers. Matching and staging of amplifiers to obtain high-pressure gain was also studied. Variable parameters were aspect ratio, setback, control length, receiver distance, receiver width, width of center vent, and bias pressure levels. Usable pressure gains from 4 to 19 per stage can now be achieved, and five amplifiers were staged together to yield pressure gains up to 2,000,000.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: AGARD Fluidics Technol.; p 209-227
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 22
    facet.materialart.
    Unknown
    Magnetometers using RF-driven squids and their applications in rock magnetism and paleomagnetism (1976)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Reviews of Geophysics and Space Physics; 14; Nov. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 23
    facet.materialart.
    Unknown
    Diffraction effects on angular response of X-ray collimators (1976)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Angular responses have been measured for X-ray collimators with half-widths ranging from minutes of arc down to 10 arcsec. In the seconds-of-arc range, diffraction peaks at off-axis angles can masquerade as side lobes of the collimator angular response. Measurements and qualitative physical arguments lead to a rule of thumb for collimator design; namely, the angle of first minimum in the Fraunhofer single-slit diffraction pattern should be less than one-fourth of the collimator geometrical full-width at half-maximum intensity.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Review of Scientific Instruments; 47; Aug. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 24
    facet.materialart.
    Unknown
    Photometric calibration of planetary photographs (1976)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The basic data and approach for calibrating photographic plates obtained with the 61 cm telescope at the Tortugas Mountain Station of New Mexico State University are summarized. Since this is the fundamental calibration of planetary data it is of use to all in-house users as well as other individuals who use the data.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Contrib. of the Observatory of N. Mex. State Univ., Vol. 1, No. 4; p 159-163
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 25
    facet.materialart.
    Unknown
    Testing of a photoelectric photometer. 1: Determination of operational parameters (1976)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Observations over four months are used to evaluate magnitude and color transformations, extinction coefficients, and a gain table for the photoelectric photometer of the 41 cm. reflector at the Tortugas Mountain site. Ways of increasing the efficiency and accuracy of this system are discussed.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Contrib. of the Observatory of N. Mex. State Univ., Vol. 1, No. 4; p 148=153
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 26
    facet.materialart.
    Unknown
    Sensitivity limits of an infrared heterodyne spectrometer for astrophysical applications (1976)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: A discussion and an evaluation of the degradation in sensitivity are given for a heterodyne spectrometer employing a HgCdTe photodiode mixer and tunable diode lasers. The minimum detectable source brightness is considered as a function of the mixer parameters, transmission coefficient of the beam splitter, and local oscillator emission powers. The degradation in the minimum detectable line source brightness that results from the bandwidth being a fraction of the line width is evaluated and plotted as a function of the wavelength and bandwidth for various temperature to mass ratios. It is shown that the minimum achievable degradation in the sensitivity of a practical astronomical heterodyne spectrometer is about 30. Estimates of SNRs with which IR line emission from astronomical sources of interest may be detected are given.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Applied Optics; 15; Feb. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 27
    facet.materialart.
    Unknown
    Use of dynamic theory to describe experimental results from volume holography (1976)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The general applicability of dynamic theory to the description of the recording and readout characteristics of volume (thick) hologram gratings is indicated. In dynamic theory (as opposed to static theory), the volume nature of the thick holographic grating allows the interference of an incident light beam with its own diffracted beam inside the recording medium. This effect causes the continuous recording of another grating that alters the initial one, producing a resultant grating that is not uniform through the thickness of the recording material and a grating whose writing and reading characteristics may vary dramatically, depending on the recording material and the experimental conditions. A large number of diverse types of writing, reading, and angular-selectivity behavior have been reported. The dynamic theory of thick-hologram writing and reading is shown to predict qualitatively all of these various types of experimental behavior.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Journal of Applied Physics; 47; Jan. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 28
    facet.materialart.
    Unknown
    Image quality prediction - An aid to the Viking lander imaging investigation on Mars (1976)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Image quality criteria and image quality predictions are formulated for the multispectral panoramic cameras carried by the Viking Mars landers. Image quality predictions are based on expected camera performance, Mars surface radiance, and lighting and viewing geometry (fields of view, Mars lander shadows, solar day-night alternation), and are needed in diagnosis of camera performance, in arriving at a preflight imaging strategy, and revision of that strategy should the need arise. Landing considerations, camera control instructions, camera control logic, aspects of the imaging process (spectral response, spatial response, sensitivity), and likely problems are discussed. Major concerns include: degradation of camera response by isotope radiation, uncertainties in lighting and viewing geometry and in landing site local topography, contamination of camera window by dust abrasion, and initial errors in assigning camera dynamic ranges (gains and offsets).
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Applied Optics; 15; July 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 29
    facet.materialart.
    Unknown
    Contactless method of measuring resistivity (1976)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: A method is described for measuring the conductivity of materials without having to make electrical contact with the material. Currents which are magnetically induced in the conducting sample are measured by means of the magnetic fields they produce. Although induction techniques have been used in the past for this type of measurement, the configuration presented here makes it possible to perform absolute measurements of resistivity over a wide range of values for relatively small samples. The theory of the technique, the results of measurements made with it, and a comparison of the technique with other methods are presented.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Review of Scientific Instruments; 47; June 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 30
    facet.materialart.
    Unknown
    Doppler-shifted reflections of X rays in beamfoil spectroscopy (1976)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Carbon foils were positioned at roughly 10 deg to the conventional perpendicular position so that the spectrometer would view the beam on emergence from the foil, with no radiation shielded by a bowed or wrinkled foil or by the foil holder. Extraneous peaks due to reflected radiation were detected in the spectrum obtained with the tilted foil. A large satellite appears longward of the spectral line and is attributed to Doppler-shifted radiation reflected from the foil surface. Special tests arranged to validate the origin of the satellites are described. The relative intensity of the reflected radiation compared with the direct radiation observed is at variance with the relative intensities reported for longer wavelengths. The reasons for this, possible effects of spectrometer geometry, and applications in the investigation or generation of polarization remain to be investigated
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Applied Optics; 15; Aug. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 31
    facet.materialart.
    Unknown
    Refractive-index profile and physical process determination in thick gratings in electrooptic crystals (1976)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: A method for determining the refractive index profile of thick phase gratings in linear electrooptic crystals is presented. This method also determines the effective photovoltaic electric field and the relative contributions of diffusion and drift during hologram recording. The method requires only a knowledge of the modulation ratio during hologram recording and the fundamental and the higher-order diffraction efficiencies of the grating. As an illustration of the method, the refractive index profile, the effective photovoltaic field, and the relative contributions of diffusion and drift are determined from experimental measurements for a lithium niobate holographic grating.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Applied Optics; 15; Aug. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 32
    facet.materialart.
    Unknown
    Oversampling of digitized images (1976)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Oversampling is defined as sampling with a device whose characteristic width is greater than the interval between samples. This paper shows why oversampling should be avoided and discusses the limitations in data processing if circumstances dictate that oversampling cannot be circumvented. Principally, oversampling should not be used to provide interpolating data points. Rather, the time spent oversampling should be used to obtain more signal with less relative error, and the Sampling Theorem should be employed to provide any desired interpolated values. The concepts are applicable to single-element and multielement detectors.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Astronomical Journal; 81; Apr. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 33
    facet.materialart.
    Unknown
    An alpha particle instrument with alpha, proton, and X-ray modes for planetary chemical analyses (1976)
    In:  Other Sources
    Details
    Publication Date: 2019-06-28
    Description: The interaction of alpha particles with matter is employed in a compact instrument that could provide rather complete in-situ chemical analyses of surfaces and thin atmospheres of extraterrestrial bodies. The instrument is a miniaturized and improved version of the Surveyor lunar instrument. The backscattering of alpha particles and (alpha, p) reactions provide analytical data on the light elements (carbon-iron). An X-ray mode that detects the photons produced by the alpha sources provides sensitivity and resolution for the chemical elements heavier than about silicon. The X-rays are detected by semiconductor detectors having a resolution between 150 and 250 eV at 5.9 keV. Such an instrument can identify and determine with good accuracy 99 percent of the atoms (except hydrogen) in rocks. For many trace elements, the detecting sensitivity is a few ppm. Auxiliary sources could be used to enhance the sensitivities for elements of special interest. The instrument could probably withstand the acceleration involved in semi-hard landings.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Nuclear Instruments and Methods (ISSN 0167-5087); 134; 1976
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 34
    facet.materialart.
    Unknown
    Advanced very high resolution radiometer (1976)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: The advanced very high resolution radiometer development program is considered. The program covered the design, construction, and test of a breadboard model, engineering model, protoflight model, mechanical structural model, and a life test model. Special bench test and calibration equipment was also developed for use on the program.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA-CR-156682
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 35
    facet.materialart.
    Unknown
    Channel electron multipliers - Detection efficiencies with opaque MgF2 photocathodes at XUV wavelengths (1976)
    In:  Other Sources
    Details
    Publication Date: 2019-06-27
    Description: Detection efficiencies of channel electron multipliers (CEM) with opaque MgF2 photocathodes obtained in the extreme ultraviolet (XUV), 44 A to 990 A, are reported. A stable highly efficient response is reported for that interval, with no adverse effects on CEM performance. Efficiencies twice those of uncoated CEMs are obtained for 50 A to 350 A. The Mullard B419BL and Galileo 4510WL single-stage cone-cathode CEMs were used in the experiments. A rare-gas double ionization chamber was employed as absolute standard detector for 406 A to 990 A, and a flow Geiger counter filled with 96% argon and 4% isobutane for 44 A to 256 A. Absolute detection efficiencies are 10% higher from 67 A to 990 A when photocathodes are illuminated at an angle of incidence 45 deg. The photocathodes suffered no loss of response in storage (in vacuum or air) after an initial aging period. Effects of scattered UV radiation are greatly reduced when MgF2-coated CEMs are used in the XUV.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Applied Optics; 15; May 1976
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 36
    facet.materialart.
    Unknown
    A gated, wideband magnetic direction finder for lightning return strokes (1976)
    In:  Other Sources
    Details
    Publication Date: 2019-06-27
    Description: A magnetic direction finder has been developed which utilizes only the initial few microseconds of wideband return stroke waveforms to provide accurate directions to the channel bases of lightning discharges to ground. Bearing errors are minimized because, near the ground, most channels tend to be straight and vertical with no large branches or horizontal sections. Tests on a number of lightning storms at distances of 10 to 100 km indicate the angular resolution is in the range 1-2 deg, with little or no systematic dependence on azimuth or distance.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Journal of Applied Meteorology; 15; Mar. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 37
    facet.materialart.
    Unknown
    High-resolution imaging X-ray detector (1976)
    In:  Other Sources
    Details
    Publication Date: 2019-06-27
    Description: The paper describes an X-ray detector using microchannel plates as a photocathode surface and imaging photoelectron multiplier, and a crossed wire grid as a two-dimensional position-sensitive detector. The position resolution is 10 microns. The crossed wire grid consists of 100-micron-diam wires on 200-micron centers. Position sensing is accomplished by electronic interpolation to 1/20 of the wire spacing. The quantum efficiency of the microchannel plates varies from 29% at 0.28 keV to 5% at 3 keV. This detector will provide second-of-arc X-ray imaging in the focal plane of the 342.9-cm focal length grazing-incidence telescope being prepared for the HEAO-B observatory. By addition of suitable photocathodes, it can be used for single-photon imaging light detection in the UV, visible, and near-IR-ranges. In all cases, it gives a very low dark counting rate, allows timing of individual events to 1 microsec or less, and can handle counting rates up to 10,000 per sec.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Review of Scientific Instruments; 47; Mar. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 38
    facet.materialart.
    Unknown
    Pulsed resonance spectroscopy applied to turbulent combustion flows (1976)
    In:  Other Sources
    Details
    Publication Date: 2019-06-27
    Description: The application of pulsed resonance spectroscopy to the measurement of species concentrations in chemically reacting turbulent flows is discussed. The theory of such measurements is developed. An uncertainty analysis is performed, and the results are applied to typical combustion conditions. Experimental aspects are discussed. The method shows a significant theoretical improvement in accuracy over Raman and Reyleigh scattering techniques, and no significant barriers appear to block its development.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Applied Optics; 15; Apr. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 39
    facet.materialart.
    Unknown
    Channel electron multiplier - Its quantum efficiency at soft X-ray and vacuum ultraviolet wavelengths (1976)
    In:  Other Sources
    Details
    Publication Date: 2019-06-27
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Applied Optics; 15; Apr. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 40
    facet.materialart.
    Unknown
    A very-long-baseline interferometer system for geodetic applications (1976)
    In:  Other Sources
    Details
    Publication Date: 2019-06-27
    Description: A very-long-baseline interferometer system was designed and built for geodetic applications. Each interferometer terminal records a 360-kHz spectral band of noise from a compact extragalactic radio source. The center frequency of the spectral band can be selected to sample sequentially bands covering a much wider frequency range to obtain subnanosecond accuracy in group-delay measurements. A tunnel-diode pulse generator is used to calibrate the delays in the receiver. The necessary sets of algorithms and computer programs have been developed to analyze the data and have allowed the system to be employed to make accurate determinations of vector baselines, radio-source positions, polar motion, and universal time.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Radio Science; 11; May 1976
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 41
    facet.materialart.
    Unknown
    Sounder design considerations in the selection of temperature sensing channels (1976)
    In:  Other Sources
    Details
    Publication Date: 2019-06-27
    Description: Simulation studies on the performance of IR sounders under varying conditions of cloud cover and cloud heights are carried out for Nimbus 6. An analytic function is derived for calculating the relative response to cloud height errors for arbitrary cloud-sensing channels. Based on the values of the response function, the best choice of channels for determining cloud amounts are obtained. An algorithm is described for determining cloud heights, and the sensitivity of cloud-height sensing channels is tested. It is found that for the HIRS instrument, the most transparent channel in the 4.3-micron band is optimal for adjusting cloud heights, while the channel in the 15-micron band peaking closest to the surface is best for determining cloud amounts
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Journal of Applied Meteorology; 15; Apr. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 42
    facet.materialart.
    Unknown
    LaF3 infrared detector (1976)
    In:  Other Sources
    Details
    Publication Date: 2019-06-27
    Description: A class of infrared detectors is proposed, and experimental results are presented for a prototype device. The material used is LaF3, an ionic conductor with a capacitance that varies exponentially with temperature. The detectivity of a prototype detector is estimated from measured signal voltages and incident power, and a Johnson noise voltage is calculated from the measured resistance. At a modulation frequency of 20 Hz, the estimated detectivity is about 2 million cm/sq root Hz/W. For the parameters characterizing this device, the estimated detectivity is consistent with a theoretical prediction. The theory further predicts an optimum detectivity of about 1 billion cm/sq root Hz/W for much thinner devices than the prototypes.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Applied Physics Letters; 28; June 1
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 43
    facet.materialart.
    Unknown
    Nonlinear dynamic theory for photorefractive phase hologram formation (1976)
    In:  Other Sources
    Details
    Publication Date: 2019-06-27
    Description: A nonlinear dynamic theory is developed for the formation of photorefractive volume phase holograms. A feedback mechanism existing between the photogenerated field and free-electron density, treated explicitly, yields the growth and saturation of the space-charge field in a time scale characterized by the coupling strength between them. The expression for the field reduces in the short-time limit to previous theories and approaches in the long-time limit the internal or photovoltaic field. Additionally, the phase of the space charge field is shown to be time-dependent.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Applied Physics Letters; 28; Mar. 15
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 44
    facet.materialart.
    Unknown
    Ballistic Signature Identification System Study (1976)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: The first phase of a research project directed toward development of a high speed automatic process to be used to match gun barrel signatures imparted to fired bullets was documented. An optical projection technique has been devised to produce and photograph a planar image of the entire signature, and the phototransparency produced is subjected to analysis using digital Fourier transform techniques. The success of this approach appears to be limited primarily by the accuracy of the photographic step since no significant processing limitations have been encountered.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA-CR-147820 , UNITECH-76-020-U
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 45
    facet.materialart.
    Unknown
    An analog technique for the measurement of damping from transient decay signals (1976)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: A tracking filter that includes an output that is logarithmically proportional to the amplitude of the filtered signal is used to measure the damping exponent of a transient decay. This method is analogous to the digital technique referred to as the moving-block or peak-plot method. The method is simple to use and quite accurate, avoids the numerical computations associated with similar digital techniques, but is constrained by the poor time-domain response characteristics of commercial tracking filters presently available.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA-TM-X-73121 , A-6535
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 46
    facet.materialart.
    Unknown
    On the problem of embedding picture elements in regions (1976)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: A few new algorithms for region growing in pictures were developed. These algorithms are a step toward finding a satisfactory solution to the image segmentation problem, and in-depth understanding of the problems of nonsemantic image segmentation. The algorithms utilize a sequential decision approach for region boundaries detection. The sequential decisions are supported by a stochastic algorithm that maintains local statistics of the region near the boundaries as the region grows. A few illustrations of the algorithm's performance are included.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA-CR-148279 , JPL-TM-33-774
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 47
    facet.materialart.
    Unknown
    The application of an optical Fourier spectrum analyzer on detecting defects in mass-produced satellite photographs (1976)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: Various defects in mass-produced pictures transmitted to earth from a satellite are investigated. It is found that the following defects are readily detectable via Fourier spectrum analysis: (1) bit slip, (2) breakup causing loss of image, and (3) disabled track at the top of the imagery. The scratches made on the film during mass production, which are difficult to detect by visual observation, also show themselves readily in Fourier spectrum analysis. A relation is established between the number of scratches, their width and depth and the intensity of their Fourier spectra. Other defects that are found to be equally suitable for Fourier spectrum analysis or visual (image analysis) detection are synchronous loss without blurring of image, and density variation in gray scale. However, the Fourier spectrum analysis is found to be unsuitable for detection of such defects as pin holes, annotation error, synchronous loss with blurring of images, and missing image in the beginning of the work order. The design of an automated, real time system, which will reject defective films, is treated.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA-CR-148198
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 48
    facet.materialart.
    Unknown
    Program to design, fabricate, test, and deliver a thermal control-mixing control device for the George C. Marshall Space Flight Center (1976)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: The development and testing of a temperature sensor and pulse duration modulation (PDM) diverter valve for a thermal control-mixing control device are described. The temperature sensor selected for use uses a fluidic pin amplifier in conjunction with an expansion device. This device can sense changes of less than 0.25 F with greater than 15:1 signal to noise ratio when operating with a typical Freon pump supplied pressure. The pressure sensitivity of the sensor is approximately 0.0019 F/kPa. The valve which was selected was tested and performed with 100% flow diversion. In addition, the valve operates with a flow efficiency of at least 95%, with the possibility of attaining 100% if the vent flow of the PDM can be channeled through the last stage of the diverter valve. A temperature sensor which utilized an orifice bridge circuit and proportional-vortex combination mixing valve were also evaluated, but the concepts were rejected due to various problems.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA-CR-144327 , AIRESEARCH-76-411348(1)
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 49
    facet.materialart.
    Unknown
    Microelectronic bioinstrumentation systems (1976)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: Progress was made in the development of an RF cage, a single channel RF powered ECG telemetry system, and a three channel RF powered ECG, aortic blood pressure, and body temperature telemetry system. Encapsulation materials for chronic implantation of electronic circuits in the body were also evaluated.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA-CR-148145
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 50
    facet.materialart.
    Unknown
    Development of a drive system for a sequential space camera (1976)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: Breadboard models of single and dual motor drives for the shutter, claw and magazine of a space camera system were designed and tested. The single motor technique utilizes a single electronically commutated motor to drive the claw and shutter without resorting to a solenoid actuated clutch for pulse operation. Shutter speed is established by a combination of the cinemode speed and the opening of the conventional DAC two piece shutter. Pulse mode operation is obtained by applying power at a fixed clock rate and removing power at an appropriate point in the mechanical cycle such that the motor comes to rest by system friction. The dual motor approach utilizes a stepper motor to drive the shutter and an electronically commutated dc motor to drive the claw and magazine functions. The motors are synchronized electronically.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA-CR-147759 , SPO-30352-ADD
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 51
    facet.materialart.
    Unknown
    Readout electrode assembly for measuring biological impedance (1976)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: The invention comprises of a pair of readout ring electrodes which are used in conjunction with apparatus for measuring the electrical impedance between different points in the body of a living animal to determine the amount of blood flow therebetween. The readout electrodes have independently adjustable diameters to permit attachment around different parts of the body between which it is desired to measure electric impedance. The axial spacing between the electrodes is adjusted by a pair of rods which have a first pair of ends fixedly attached to one electrode and a second pair of ends slidably attached to the other electrode. Indicia are provided on the outer surface of the ring electrodes and on the surface of the rods to permit measurement of the circumference and spacing between the ring electrodes.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 52
    facet.materialart.
    Unknown
    A transformation method for deriving from a photograph, position and heading of a vehicle in a plane (1976)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: Equations have been derived that transform perspectively viewed planar surface coordinates, as seen in a photograph, into coordinates of the original plane surface. These transformation equations are developed in terms of nine geometric variables that define the photographic setup and are redefined in terms of eight parameters. The parameters are then treated as independent quantities that fully characterize the transformation and are expressed directly in terms of the four corner coordinates of a reference rectangle in the object plane and their coordinates as seen in a photograph. Vehicle position is determined by transforming the perspectively viewed coordinate position of a representative vehicle target into runway coordinates. Vehicle heading is determined from the runway coordinates of two vehicle target points. When the targets are elevated above the plane of the reference grid, the computation of the heading angle is unaffected; however, the computation of the target position may require adjustment of two parameters. Methods are given for adjusting the parameters for elevation and an example is included for both nonelevated and elevated target conditions.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA-TN-D-8201 , L-10411
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 53
    facet.materialart.
    Unknown
    High-resolution surface temperature measurements on rotating turbine blades with an infrared pyrometer (1976)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: A high-resolution pyrometer was developed and tested on a modified turbine engine. The pyrometer was used to obtain temperature profiles of the viewed surface of turbine blades in the engine at tip speeds up to 366 meters per second. The combination of coherent fiber optics, a silicon avalanche detector, and high-speed electronics enabled surface resolution of a spot diameter of 0.05 centimeter. The data, in the form of temperature profiles, was obtained in near real time as a hard copy output from a computer display terminal. Temperatures measured with the pyrometer and with thermocouples agreed within 2 percent at temperatures between 977 to 1144 K.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA-TN-D-8213 , E-8613
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 54
    facet.materialart.
    Unknown
    Laser velocimetry applied to transonic and supersonic aerodynamics (1976)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: Measurements obtained with laser velocimetry in a Mach 2.9 separated turbulent boundary layer and in the transonic flow past a two-dimensional airfoil section are presented and compared to data realized by conventional techniques. Agreement in mean velocities was realized where the pressure measurements could be considered reliable; however, in regions of instantaneous reverse velocities, the laser results were found to be consistent with the physics of the flow whereas the pressure data were not. Streamwise turbulence intensities are also presented. In the transonic airfoil study, velocity measurements obtained immediately outside the upper surface boundary layer of a 6-inch chord NACA 64A010 airfoil are compared to edge velocities inferred from surface pressure measurements. For free-stream Mach numbers of 0.6 and 0.8, the agreement in results was very good. "Dual scatter" optical arrangements in conjunction with a single particle, counter-type signal processor were employed in these investigations.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA-TM-X-73117 , A-6510
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 55
    facet.materialart.
    Unknown
    Advanced prototype automated iodine monitor system (1976)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: The technique of detecting and measuring parts-per-million concentrations of aqueous iodine by direct spectrophotometric means is discussed, and development of a prototype Automated Iodine Monitoring/Controller System (AIMS) is elaborated. The present effort is directed primarily toward reducing the power requirement and the weight of the AIMS. Other objectives include determining the maximum concentration of iodine that can be dissolved in an alcohol solution, and in an aqueous potassium iodide solution. Also discussed are the effects of a no flow condition on iodine measurements and the effect of pH on spectrophotometric iodine determinations.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA-CR-147492 , FR-1203-101
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 56
    facet.materialart.
    Unknown
    Detector absorptivity measuring method and apparatus (1976)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: A method and apparatus for measuring the absorptivity of a radiation detector by making the detector an integral part of a cavity radiometer are described. By substituting the detector for the surface of the cavity upon which the radiation first impinges a comparison is made between the quantity of radiation incident upon the detector and the quantity reflected from the detector. The difference between the two is a measurement of the amount of radiation absorbed by the detector.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 57
    facet.materialart.
    Unknown
    Sun angle calculator (1976)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: A circular computer and system is disclosed for determining the sun angle relative to the horizon from any given place and at any time. The computer includes transparent, rotatably mounted discs on both sides of the circular disc member. Printed on one side of the circular disc member are outer and inner circular sets of indicia respectively representative of site longitude and Greenwich Mean Time. Printed on an associated one of the rotatable discs is a set of indicia representative of Solar Time. Printed on the other side of the circular disc member are parallel lines representative of latitude between diametral representations of North and South poles. Elliptical lines extending between the North and South poles are proportionally disposed on the surface to scale Solar Time in hours.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 58
    facet.materialart.
    Unknown
    Manufacturing techniques for gyroscopes in gravity probe B (1976)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: The design of the fused silica gyroscope configuration is presented. The first gyroscope was made for erection and spin tests only and does not contain the angle readout loops necessary for a functioning experimental gyroscope. The rotor ball described is not coated with the ultimate material, niobium, but instead with a sandwich of titanium, cooper, and titanium for spin-up test purposes. Background, historical information, manufacturing procedures, and sketches for this gyroscope are included to provide a better understanding of the device and the techniques and special tools required to manufacture a fused silica gyroscope to the required specifications.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA-TM-X-73321
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 59
    facet.materialart.
    Unknown
    Studies of noble-metal thermocouple stability at high temperatures (1976)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: Two investigatory studies on performance characteristics of noble-metal thermocouples are described. (1) thermoelectric stability as affected by preferential oxidation of iridium in the system iridium-40% rhodium versus iridium, and (2) the effects of temperature gradients on the emf stability of the systems platinum-13% rhodium versus platinum and iridium-40% rhodium versus iridium, operating in air. The stability investigation was carried out at three temperatures - 1700, 1850, and 2000 C - by comparing the output of the test thermocouple in air with the output of an identically constructed reference thermocouple in nitrogen. The results show that no calibration shift was observed producing a change in output greater than that corresponding to a 2.0% change in the indicated temperature for all samples tested. The investigation of gradient effects was carried out by subjecting test thermocouples to both severe and mild gradients for periods up to 200 hours. For the platinum system, the operating temperature was 1500 C with gradients of 1475 and 700 C/cm; for the iridium system, 2000 C with gradients of 700, 1500, and 1975 C/cm. Exposure to temperature gradients was found to introduce significant changes in calibration for both systems. In both investigations, the thermoelements were examined by means of electron-probe analysis and by metallographic methods to detect chemical and structural changes. Data and micrographs are presented.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA-CR-135055 , NBSIR-76-1026
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 60
    facet.materialart.
    Unknown
    A dynamic pressure source for the calibration of pressure transducers (1976)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: A dynamic pressure source is described for producing sinusoidally varying pressures of up to 34 kPa zero to peak, over the frequency range of approximately 50 Hz to 2 kHz. The source is intended for the dynamic calibration of pressure transducers. The transducer to be calibrated is mounted near the base of the thick walled aluminum tube forming the vessel so that the pressure sensitive element is in contact with the liquid in the tube. A section of the tube is filled with small steel balls to damp the motion of the 10-St dimethyl siloxane working fluid in order to extend the useful frquency range to higher frequencies than would be provided by an undamped system. The dynamic response of six transducers provided by the sponsor was evaluated using the pressure sources; the results of these calibrations are given.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA-CR-148492 , NBS-TN-914
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 61
    facet.materialart.
    Unknown
    Method and apparatus for tensile testing of metal foil (1976)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: A method for obtaining accurate and reproducible results in the tensile testing of metal foils in tensile testing machines is described. Before the test specimen are placed in the machine, foil side edges are worked until they are parallel and flaw free. The specimen are also aligned between and secured to grip end members. An aligning apparatus employed in the method is comprised of an alignment box with a longitudinal bottom wall and two upright side walls, first and second removable grip end members at each end of the box, and a means for securing the grip end members within the box.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 62
    facet.materialart.
    Unknown
    Determination of transfer function of COPE correlation interferometer instrument (1976)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: The comparison of theoretical and instrument response functions and its use as a procedure for determining the transfer function of the COPE correlation interferometer are summarized. Data show qualitative agreement can be obtained when discrepancies between theory and instrument are investigated and instrument components are analyzed in detail. Data were obtained using a set of calibration data and computer algorithms.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA-CR-146570 , PGSTR-PH76-26
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 63
    facet.materialart.
    Unknown
    Development of lightning current detector (1976)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: A lightning current detector to record the maximum current amplitude of a lightning strike to the 150 meter weather tower at KSC was developed. The principle of operation of the detector is discussed, materials chosen to build the detector are described, and calibration tests performed on the detector are given. Field results of the detectors from two separate lightning strikes to the tower are included.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA-TM-X-74154 , KSC-TR-1482
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 64
    facet.materialart.
    Unknown
    Development and field testing of a Light Aircraft Oil Surveillance System (LAOSS) (1976)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: An experimental device consisting of a conventional TV camera with a low light level photo image tube and motor driven polarized filter arrangement was constructed to provide a remote means of discriminating the presence of oil on water surfaces. This polarized light filtering system permitted a series of successive, rapid changes between the vertical and horizontal components of reflected polarized skylight and caused the oil based substances to be more easily observed and identified as a flashing image against a relatively static water surface background. This instrument was flight tested, and the results, with targets of opportunity and more systematic test site data, indicate the potential usefulness of this airborne remote sensing instrument.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA-CR-2739 , CG-D-1-76
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 65
    facet.materialart.
    Unknown
    Computer program for calculating pressure-broadened Raman spectra for molecular nitrogen and oxygen (1976)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: A computer program is given for calculating the rotational Raman spectrum for molecular nitrogen and oxygen. Provision is made for pressure broadening. Several sample calculations at various pressures are shown. The relative heights of some of the lines are affected by pressure broadening.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA-TM-X-3427 , E-8608
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 66
    facet.materialart.
    Unknown
    Digital computer processing of peach orchard multispectral aerial photography (1976)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: Several methods of analysis using digital computers applicable to digitized multispectral aerial photography, are described, with particular application to peach orchard test sites. This effort was stimulated by the recent premature death of peach trees in the Southeastern United States. The techniques discussed are: (1) correction of intensity variations by digital filtering, (2) automatic detection and enumeration of trees in five size categories, (3) determination of unhealthy foliage by infrared reflectances, and (4) four band multispectral classification into healthy and declining categories.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA-CR-149998
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 67
    facet.materialart.
    Unknown
    Ultrasonic corona sensor study (1976)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: The overall objective of this program is to determine the feasibility of using ultrasonic (above 20 kHz) corona detection techniques to detect low order (non-arcing) coronas in varying degrees of vacuum within large high vacuum test chambers, and to design, fabricate, and deliver a prototype ultrasonic corona sensor.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA-CR-150988 , HUD-10536-CE
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 68
    facet.materialart.
    Unknown
    High resolution Fourier interferometer-spectrophotopolarimeter (1976)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: A high-resolution Fourier interferometer-spectrophotopolarimeter is provided using a single linear polarizer-analyzer the transmission axis azimuth of which is positioned successively in the three orientations of 0 deg, 45 deg, and 90 deg, in front of a detector; four flat mirrors, three of which are switchable to either of two positions to direct an incoming beam from an interferometer to the polarizer-analyzer around a sample cell transmitted through a medium in a cell and reflected by medium in the cell; and four fixed focussing lenses, all located in a sample chamber attached at the exit side of the interferometer. This arrangement can provide the distribution of energy and complete polarization state across the spectrum of the reference light entering from the interferometer; the same light after a fixed-angle reflection from the sample cell containing a medium to be analyzed; and the same light after direct transmission through the same sample cell, with the spectral resolution provided by the interferometer.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 69
    facet.materialart.
    Unknown
    Static coefficient test method and apparatus (1976)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: The static coefficient of friction between contacting surfaces of a plurality of bodies is determined by applying a load to the bodies in a direction normal to the contacting surfaces. Opposite ends of a flexible filament are connected to a load cell and the first of the bodies. A motor continuously moves the second of the bodies away from the load cell at constant velocity at right angles to the force of the normal load so that the first body moves intermittently relative to the second body across a contact surface between them. The load on the surfaces, the nature of the surfaces, and the speed of the first body relative to the load cell are such that the filament is alternately and cyclically tensioned and relaxed as the movement occurs. The maximum tension occurs at the incipient stages of movement of the first body relative to the second body. The load cell derives a series of measurements which are coupled to an x-y recorder, from which the maximum forces of the filament are determined to enable the static coefficient of friction to be determined. From the maximum forces and the normal force, the coefficient is determined. For determining coefficients of friction where there are large compression loads, the normal load is applied with a calibrated compression spring that is deflected by a predetermined amount determined by a spring load vs. deflection calibration curve.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 70
    facet.materialart.
    Unknown
    Design, building and test of one prototype and four final position sensor assemblies: Hall effect position sensors (1976)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: This report covers the development of a three channel Hall effect position sensing system for the commutation of a three phase dc torquer motor. The effort consisted of the evaluation, modification and re-packaging of a commercial position sensor and the design of a target configuration unique to this application. The resulting design meets the contract requirements and, furthermore, the test results indicate not only the practicality and versatility of the design, but also that there may be higher limits of resolution and accuracy achievable.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA-CR-144806
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 71
    facet.materialart.
    Unknown
    Development and evaluation of a Hadamard transform imaging spectrometer and a Hadamard transform thermal imager (1976)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: A spectrometric imager and a thermal imager, which achieve multiplexing by the use of binary optical encoding masks, were developed. The masks are based on orthogonal, pseudorandom digital codes derived from Hadamard matrices. Spatial and/or spectral data is obtained in the form of a Hadamard transform of the spatial and/or spectral scene; computer algorithms are then used to decode the data and reconstruct images of the original scene. The hardware, algorithms and processing/display facility are described. A number of spatial and spatial/spectral images are presented. The achievement of a signal-to-noise improvement due to the signal multiplexing was also demonstrated. An analysis of the results indicates both the situations for which the multiplex advantage may be gained, and the limitations of the technique. A number of potential applications of the spectrometric imager are discussed.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA-CR-145036 , ASE-3851
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 72
    facet.materialart.
    Unknown
    A system for extracting 3-dimensional measurements from a stereo pair of TV cameras (1976)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: Obtaining accurate three-dimensional (3-D) measurement from a stereo pair of TV cameras is a task requiring camera modeling, calibration, and the matching of the two images of a real 3-D point on the two TV pictures. A system which models and calibrates the cameras and pairs the two images of a real-world point in the two pictures, either manually or automatically, was implemented. This system is operating and provides three-dimensional measurements resolution of + or - mm at distances of about 2 m.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA-CR-147149 , JPL-TM-33-769
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 73
    facet.materialart.
    Unknown
    Prediction of Viking lander camera image quality (1976)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: Formulations are presented that permit prediction of image quality as a function of camera performance, surface radiance properties, and lighting and viewing geometry. Predictions made for a wide range of surface radiance properties reveal that image quality depends strongly on proper camera dynamic range command and on favorable lighting and viewing geometry. Proper camera dynamic range commands depend mostly on the surface albedo that will be encountered. Favorable lighting and viewing geometries depend mostly on lander orientation with respect to the diurnal sun path over the landing site, and tend to be independent of surface albedo and illumination scattering function. Side lighting with low sun elevation angles (10 to 30 deg) is generally favorable for imaging spatial details and slopes, whereas high sun elevation angles are favorable for measuring spectral reflectances.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA-TN-D-8148 , L-10626
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 74
    facet.materialart.
    Unknown
    Particulate and aerosol detector (1976)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: A device is described for counting aerosols and sorting them according to either size, mass or energy. The component parts are an accelerator, a capacitor sensor and a readout. The accelerator is a means for accelerating the aerosols toward the face of the capacitor sensor with such force that they partially penetrate the capacitor sensor, momentarily discharging it. The readout device is a means for counting the number of discharges of the capacitor sensor and measuring the amplitudes of these different discharges. The aerosols are accelerated by the accelerator in the direction of the metal layer with such force that they penetrate the metal and damage the oxide layers, thereby allowing the electrical charge on the capacitor to discharge through the damaged region. Each incident aerosol initiates a discharge path through the capacitor in such a fashion as to vaporize the conducting path. Once the discharge action is complete, the low resistance path no longer exists between the two capacitor plates and the capacitor is again able to accept a charge. The active area of the capacitor is reduced in size by the damaged area each time a discharge occurs.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 75
    facet.materialart.
    Unknown
    Pulse height response of an optical particle counter to monodisperse aerosols (1976)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: The pulse height response of a right angle scattering optical particle counter has been investigated using monodisperse aerosols of polystyrene latex spheres, di-octyl phthalate and methylene blue. The results confirm previous measurements for the variation of mean pulse height as a function of particle diameter and show good agreement with the relative response predicted by Mie scattering theory. Measured cumulative pulse height distributions were found to fit reasonably well to a log normal distribution with a minimum geometric standard deviation of about 1.4 for particle diameters greater than about 2 micrometers. The geometric standard deviation was found to increase significantly with decreasing particle diameter.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA-TM-X-72812
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 76
    facet.materialart.
    Unknown
    Sampler of gas borne particles (1976)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: An atmosphere sample is described which includes a very thin filter element with straight-through holes on the order of 1 micron. A sample of air with particles to be examined is driven by means of a pressurized low molecular weight gas, e.g., He to the filter element front side. A partial vacuum may be present at the back side of the filter element. The pressure differential across the filter element is just below the rupture point of the filter element. Particles smaller than filter holes are deposited on the filter element. When using a filter element of plastic material of a thickness on the order of 10 microns, a stainless steel back-up plate and a diffusion member are used to support the filter element when subjected to a pressure differential on the order of a few hundred atmospheres.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 77
    facet.materialart.
    Unknown
    Molecular beam mass spectrometer development (1976)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: An analytical model, based on the kinetics theory of a drifting Maxwellian gas is used to determine the nonequilibrium molecular density distribution within a hemispherical shell open aft with its axis parallel to its velocity. The concept of a molecular shield in terrestrial orbit above 200 km is also analyzed using the kinetic theory of a drifting Maxwellian gas. Data are presented for the components of the gas density within the shield due to the free stream atmosphere, outgassing from the shield and enclosed experiments, and atmospheric gas scattered off a shield orbiter system. A description is given of a FORTRAN program for computating the three dimensional transition flow regime past the space shuttle orbiter that employs the Monte Carlo simulation method to model real flow by some thousands of simulated molecules.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA-CR-148724 , PGSTR-PH76-43
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 78
    facet.materialart.
    Unknown
    High Temperature Strain Gage Calibration Fixture (1976)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: An apparatus and method are described for calibrating high temperature strain gases which serve for both dead weight and constant deflection measurements. A cantilever support arm allows the test unit to slide into a furnace while one end is subjected to bending strain either by hanging weights upon it or by deflecting it with a push rod. The dual nature of the fixture permits both tests to be run without change of the test specimen or removal from the furnace.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 79
    facet.materialart.
    Unknown
    Wind sensor (1976)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: An apparatus is described for sensing the temperature, velocity, and direction of the wind, including four temperature-dependent crystal oscillators spaced about an axis, a heater centered on the axis, and a screen through which the wind blows to pass over the crystals. In one method of operation, the frequency of the oscillators is taken when the heater is not energized, to obtain the temperature of the wind, and the frequencies of the oscillators are taken after the heater is energized to determine the direction and velocity of the wind. When the heater is energized, the wind causes the downwind crystals to achieve a higher temperature than the upwind crystals, and with the magnitude of the difference indicating the velocity of the wind.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 80
    facet.materialart.
    Unknown
    Holographic Recording Materials Development (1976)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: Organic photorefractive materials were evaluated for application in a reversible holographic memory system. Representative indigo and thioindigo derivatives and several stilbene derivatives were studied as well as 15, 16-dialkyldihydropyrene derivatives the following goals were achieved: (1) the successful writing of phase holograms in a thioindigo/polymer gel system, (2) the successful writing and erasing of phase holograms in a variety of indigo/polymer gel and indigo/solid polymer systems, and (3) the identification of indigoid dyes and 15, 16-dialkyldihydropyrene derivatives as materials potentially suitable for utilization in an operational system. Photochemical studies of the stilbene, indigo, thioindigo, and dialkyldihydropyrene derivatives in solution and in a variety of polymer matrix materials were conducted with the goal of optimizing the photorefractive behavior of the chemical system as a whole. The spectroscopic properties required of optimal photorefractive materials were identified, and it was shown that both the indigoid dyes and the dialkyldihydropyrenes closely match the required properties.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA-CR-144991
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 81
    facet.materialart.
    Unknown
    Development of a drive system for a sequential space camera (1976)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: An electronically commutated dc motor is reported for driving the camera claw and magazine, and a stepper motor is described for driving the shutter with the two motors synchronized electrically. Subsequent tests on the breadboard positively proved the concept, but further development beyond this study should be done. The breadboard testing also established that the electronically commutated motor can control speed over a wide dynamic range, and has a high torque capability for accelerating loads. This performance suggested the possibility of eliminating the clutch from the system while retaining all of the other mechanical features of the DAC, if the requirement for independent shutter speeds and frame rates can be removed. Therefore, as a final step in the study, the breadboard shutter and shutter drive were returned to the original DAC configuration, while retaining the brushless dc motor drive.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA-CR-147535 , SPO-30352
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 82
    facet.materialart.
    Unknown
    Holographic motion picture camera with Doppler shift compensation (1976)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: A holographic motion picture camera is reported for producing three dimensional images by employing an elliptical optical system. There is provided in one of the beam paths (the object or reference beam path) a motion compensator which enables the camera to photograph faster moving objects.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 83
    facet.materialart.
    Unknown
    Moving particle composition analyzer (1976)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: A mass spectrometry apparatus for analyzing the composition of moving microscopic particles is introduced. The apparatus includes a capacitor with a front electrode upon which the particles impinge, a back electrode, and a solid dielectric sandwiched between the front and back electrodes. In one embodiment, the electrodes and dielectric are arcuately shaped as concentric peripheral segments of different spheres having a common center and different radii. The front electrode and dielectric together have a thickness such that an impinging particle can penetrate them. In a second embodiment, the capacitor has planar, parallel electrodes, in which case the ejected positive ions are deflected downstream of a planar grid by a pair of spaced, arcuate capacitor plates having a region between them through which the ejected ions travel.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 84
    facet.materialart.
    Unknown
    Thermocouple time constant measurement by cross power spectra (1976)
    In:  Other Sources
    Details
    Publication Date: 2019-06-27
    Description: A method of measuring thermocouple time constants is outlined which requires Fourier signal processing. In this method, two thermocouples of differing time constants are placed in a gas flow as closely as possible to one another, and the time constant of the first thermocouple is determined directly from the extremum of the imaginary part of the ratio of the ensemble averaged cross-power spectrum to the ensemble averaged auto-power spectrum of that thermocouple. A coherence function is given for assuring the quality of the data, and results are presented for an experimental test of the method. Some problems with the method are briefly noted.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: AIAA Journal; 14; Nov. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 85
    facet.materialart.
    Unknown
    N2O analysis in the atmosphere via electron capture-gas chromatography (1976)
    In:  Other Sources
    Details
    Publication Date: 2019-06-27
    Description: The potential of commercially available pulse-modulated electron capture detector (ECD)-equipped gas chromatographs for direct measurement of ambient levels of N2O is assessed. Since the sensitivity of ECD to N2O is directly proportional to the detector operating temperature and detector standing current, it is necessary to use a 'hot' ECD (250-350 C). The method is shown to be very precise with a standard error not exceeding 1% for automated analysis of ambient air samples. The technology is available to permit highly accurate routine direct analysis of N2O in the troposphere and stratosphere. Both captured air samples or direct real-time measurement from research vessels or airborne platforms are possible.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Geophysical Research Letters; 3; Oct. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 86
    facet.materialart.
    Unknown
    Quadrant anode image sensor (1976)
    In:  Other Sources
    Details
    Publication Date: 2019-06-27
    Description: A position-sensitive event-counting electronic readout system for microchannel plates (MCPs) is described that offers the advantages of high spatial resolution and fast time resolution. The technique relies upon a four-quadrant electron-collecting anode located behind the output face of the microchannel plate, so that the electron cloud from each detected event is partly intercepted by each of the four quadrants. The relative amounts of charge collected by each quadrant depend on event position, permitting each event to be localized with two ratio circuits. A prototype quadrant anode system for ion, electron, and extreme ultraviolet imaging is described. The spatial resolution achieved, about 10 microns, allows individual MCP channels to be distinguished.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Review of Scientific Instruments; 47; Nov. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 87
    facet.materialart.
    Unknown
    Nonintrusive Flowmeter (1976)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: The results of analytical and experimental work performed in the design, fabrication, and test of a prototype nonintrusive gaging system for use in monitoring the consumption of earth-storable fuels and oxidants in either a one-g or a zero-g environment are explained. The design specifications were those applicable to the reaction control system and to the orbital maneuvering system (OMS) fuel and oxidant on the space shuttle while in orbit. The major requirement was for the measurement of flow pulses with sufficient accuracy to provide a continuous knowledge of the fuel and oxidant remaining in the OMS system to within 1% or better. An ultrasonic frequency chirp technique was used having a high inherent rejection for signals traversing stray paths, and for random noise generated by the flowing liquid. A detailed analysis of the frequency chirp approach for two modes of operation (period and phase changes), including an error analysis are reported.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA-CR-151028 , FR-2689-101
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 88
    facet.materialart.
    Unknown
    Directional acoustic measurements by laser Doppler velocimeters (1976)
    In:  Other Sources
    Details
    Publication Date: 2019-06-27
    Description: Laser Doppler velocimeters (LDVs) are used as velocity microphones to measure sound pressure level in the range from 90 to 130 dB, spectral components, and two-point correlation functions for acoustic-noise source identification. Close agreement between LDV and microphone data is observed. Directional sensitivity and the ability to measure remotely make LDVs useful tools for acoustic measurement where placement of any physical probe is difficult or undesirable, as in the diagnosis of jet noise.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Applied Physics Letters; 29; Oct. 1
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 89
    facet.materialart.
    Unknown
    Infrared multidetector spectrometer for remote sensing of temperature profiles in the presence of clouds (1976)
    In:  Other Sources
    Details
    Publication Date: 2019-06-27
    Description: An infrared multidetector spectrometer with channels in the 4.3-micron and 15-micron CO2 bands for the remote sensing of temperature profiles in the presence of clouds is described. Results obtained from aircraft flights in July 1975 over ocean sites under various conditions of cloudiness demonstrate the capability of the dual frequency technique to recover surface temperatures to an accuracy of + or - 0.5 K in the presence of up to 90% cloud cover.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Applied Optics; 15; Sept
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 90
    facet.materialart.
    Unknown
    Chemical mapping of planetary surfaces (1976)
    In:  Other Sources
    Details
    Publication Date: 2019-06-27
    Description: Two instruments, the gamma-ray spectrometer and the X-ray fluorescence spectrometer, are uniquely suited to the chemical mapping of planetary surfaces from orbit. Through their detection of characteristic line spectra they measure the concentrations of a suite of elements in each area overflown. Multielement chemical maps derived from these remote measurements are used in the construction of evolutionary models of planetary bodies and of the solar system as a whole. The NaI(T1) gamma-ray spectrometer and a gas proportional X-ray spectrometer were flown over 20 percent of the lunar surface during the Apollo 15 and 16 missions. These instruments measured chemical differences across the boundaries of known lunar provinces and revealed several new features of lunar-surface composition. Advanced spectrometers which are under development for future missions are able to educe much more information in a given time span than the Apollo instruments. They may be used in possible future missions such as Lunar Polar Orbiter, a Mars orbiter, a Mercury orbiter, outer planet satellite missions, rendezvous with asteroids and cometary nuclei, and surface-penetrating planetary probes.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: IEEE Transactions on Geoscience Electronics; GE-14; July 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 91
    facet.materialart.
    Unknown
    Laser heterodyne detection techniques (1976)
    In:  Other Sources
    Details
    Publication Date: 2019-06-27
    Description: The principles of heterodyne radiometry are examined, taking into account thermal radiation, the Dicke microwave radiometer, photomixing in the infrared, and signal-to-noise considerations. The passive heterodyne radiometer is considered and a description is presented of heterodyne techniques in active monitoring systems. Attention is given to gas emissivities in the infrared, component requirements, experimental heterodyne detection of gases, a comparison of the passive heterodyne radiometer with the Michelson interferometer-spectrometer, airborne monitoring applications, turbulence effects on passive heterodyne radiometry, sensitivity improvements with heterodyning, atmosphere-induced degradation of bistatic system performance, pollutant detection experiments with a bistatic system, and the airborne laser absorption spectrometer. Future improvements in spectral flexibility are also discussed.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 92
    facet.materialart.
    Unknown
    The Viking Orbiter cameras' potential for photometric measurement (1976)
    In:  Other Sources
    Details
    Publication Date: 2019-06-27
    Description: Although photometry of Mars is not listed as a major mission objective, the Viking Project has provided the Orbiter Imaging Team with cameras exhibiting significant improvement in photometric measurement as compared with past Mariners. Sample calibration data are described, together with predicted performance capabilities.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Icarus; 27; Feb. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 93
    facet.materialart.
    Unknown
    Evaluation of NASA speech encoder (1976)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: Techniques developed by NASA for spaceflight instrumentation were used in the design of a quantizer for speech-decoding. Computer simulation of the actions of the quantizer was tested with synthesized and real speech signals. Results were evaluated by a phometician. Topics discussed include the relationship between the number of quantizer levels and the required sampling rate; reconstruction of signals; digital filtering; speech recording, sampling, and storage, and processing results.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA-CR-152477
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 94
    facet.materialart.
    Unknown
    Analytical study of acousto/optical holography-interfacing methods for acoustical and optical holography NDT research (1976)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: The international status of the art of acousto optical imaging techniques adaptable to nondestructive testing and, interfacing methods for acoustical and optical holography in nondestructive testing research are studied. Evaluation of 20 different techniques encompassed investigation of varieties of detectors and detection schemes, all of which are described and summarized. Related investigation is reported in an Appendix. Important remarks on image quality, factors to be considered in designing a particular system, and conclusions and recommendations are presented. Three bibliographies are included.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA-CR-2775 , M-197
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 95
    facet.materialart.
    Unknown
    Miniature biaxial strain transducer (1976)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: A reusable miniature strain transducer for use in the measurement of static or quasi-static, high level, biaxial strain on the surface of test specimens or structures was studied. Two cantilever arms, constructed by machining the material to appropriate flexibility, are self-aligning and constitute the transducing elements of the device. Used in conjunction with strain gages, the device enables testing beyond normal gage limits for high strains and number of load cycles. The device does not require conversion computations since the electrical output of the strain gages is directly proportional to the strain measured.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 96
    facet.materialart.
    Unknown
    Scanning mechanism study for multi-frequency microwave radiometers (1976)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: Scanning mode for a microwave radiometer having large aperture antenna is determined from scientific needs by engineering tradeoffs. Two configurations of the scan drive mechanism with an integral momentum compensation are formulated for 1.OM and 1.4M diameter antennas. As the formulation is based on currently available components, it is possible to design and fabricate the formulated mechanism without new hardware development. A preliminary specification for major components of formulated drives is also included in the report.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA-CR-144853
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 97
    facet.materialart.
    Unknown
    Columbia University OSO-8 instrument for stellar and solar X-ray spectroscopy and polarimetry (1976)
    In:  Other Sources
    Details
    Publication Date: 2019-06-27
    Description: A spectrometer and a polarimeter consisting of large-area panels of mosaic crystals have been constructed and prepared for use in the OSO-8 satellite. The instrumentation is planned for study of stellar and solar X-ray spectra between 1.8-8 keV and stellar X-ray polarization at 2.6 keV. Aspects of the design which enable the instrument to make measurements of the diverse range of stellar and solar phenomena are described. Some of the unique features, such as high sensitivity, high temporal resolution, and spectral range, are discussed. The applicability of the spectrometer and polarimeter to various current problems in X-ray astronomy is considered.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 98
    facet.materialart.
    Unknown
    Investigation of a Real-time Processing System for the NASA Multifrequency Microwave Radiometer (1976)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: A study was conducted to investigate the data reduction and processing requirements for the multifrequency microwave radiometer system (MFMR). The objectives were to develop and evaluate algorithms and processing techniques which might provide for dedicated real time or near real time data processing and to develop a configuration design and processor recommendation to accomplish the data reduction. An analysis of the required data reduction and calibration equations was included along with the identification of sources of error which may be present in the (MFMR) data. The definition and evaluation of the significance of effects introduced by aircraft perturbation was given.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA-CR-151033 , RSC-3313-1
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 99
    facet.materialart.
    Unknown
    Focused laser Doppler velocimeter (1976)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: A system for remotely measuring velocities present in discrete volumes of air is described. A CO2 laser beam is focused by a telescope at such a volume, a focal volume, and within the focusable range, near field, of the telescope. The back scatter, or reflected light, principally from the focal volume, passes back through the telescope and is frequency compared with the original frequency of the laser, and the difference frequency or frequencies represent particle velocities in that focal volume.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 100
    facet.materialart.
    Unknown
    Gridless retarding potential analyzer for use in very-low-energy charged particle detection (1976)
    In:  Other Sources
    Details
    Publication Date: 2019-06-27
    Description: The theory of the hyperbolic retarding potential analyzer in the electrostatic mode is developed in detail and verified in the laboratory. A monoenergetic electron beam is used for the laboratory investigation. The analyzer (acronym HARP) has advantages over other conventional electrostatic analyzers; among them are less contact potential influence and high throughput because of the symmetry shape of the analyzer. The most useful application of the HARP is in detecting low-energy charged particles. A sample of low-energy particle data obtained in the earth's ionosphere is given.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Review of Scientific Instruments; 47; Sept
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
Close ⊗
This website uses cookies and the analysis tool Matomo. More information can be found here...