ALBERT

Beschreibung: Natural gas is an extremely important bridge fuel to a low-carbon energy economy for improving local air quality. Coal to synthetic natural gas (SNG) is an effective way to convert the high-carbon energy (coal) into the low-carbon energy with rich hydrogen (natural gas). For the modern coal to SNG industry, the high-temperature methanation (HTM) catalyst plays an important role, and the advanced evaluation process should necessitate the elimination of mass transfer effect. Some simple but effective model catalysts, such as slab and sphere, can be very helpful in defining the reaction conditions, and thus facilitating the evaluation process for real HTM catalysts. In this work, slab and sphere model catalysts were adopted to derive mass transfer and reaction-coupled equations, the numerical methods were used to solve the coupled equations for the concentration profiles in catalysts, and the effectiveness factors were accordingly calculated. By taking advantage of the Thiele module and the Weisz–Prater module , the criteria for the elimination of mass transfer effect in the HTM catalyst evaluation process were successfully defined. This work also complements the Weisz–Prater criterion by incorporating ‘negative reaction orders’.

Beschreibung: The energy expended for conditioning buildings around the world is worryingly large and increasing every year. Currently, almost half of houses around the world use some type of energy-expensive conventional air-conditioning system. These systems are high emitters of gases such as carbon dioxide and so high contributors to climate change. Consequently, alternatives must be considered. Earth–air heat exchangers (EAHEs) and phase-change materials (PCMs) may be options; they have, however, limitations. This paper proposes a novel hybrid space-conditioning system combining EAHEs with PCMs, which uses surfaces as sources of heating or cooling to provide better temperature distribution across a space and comfort enhancement with low energy use. The idea is to use an EAHE to provide cool air to discharge the PCM, consequently helping to overcome most of the limitations of both strategies. Two of a series of experiments undertaken to test the proposed system are reported in this article. The EAHE + PCM system compared with a reference room could decrease temperature swings by up to 47%. The system was proved to work although further work is required to make it commercially viable.

Beschreibung: Passive convective heat transfer enhancement can be achieved by improving the thermo-physical properties of the working fluid, changing flow geometry or both. This work presents a numerical study to investigate the combined effect of using helical coils and nanofluids on the heat transfer characteristics and pressure losses in turbulent flow regime. The developed computational fluid dynamics models were validated against published experimental data and empirical correlations. Results have shown that combining the effects of alumina (Al 2 O 3 ) nanoparticles and tube coiling could enhance the heat transfer coefficient by up to 60% compared with that of pure water in straight tube at the same Reynolds number. Also, results showed that the pressure drop in helical coils using Al 2 O 3 nanofluid for volume fraction of 3% was six times that of water in straight tubes (80% of the pressure drop increase is due to nanoparticles addition), while the effect of Reynolds number on the pressure drop penalty factor was found to be insignificant.

Beschreibung: Seismic waves sensitive to the outermost part of the Earth's liquid core seem to be affected by a stably stratified layer at the core–mantle boundary. Such a layer could have an observable signature in both long-term and short-term variations of the magnetic field of the Earth, which are used to probe the flow at the top of the core. Indeed, with the recent SWARM mission, it seems reasonable to be able to identify waves propagating in the core with period of several months, which may play an important role in the large-scale dynamics. In this paper, we characterize the influence of a stratified layer at the top of the core on deep quasi-geostrophic (Rossby) waves. We compute numerically the quasi-geostrophic eigenmodes of a rapidly rotating spherical shell, with a stably stratified layer near the outer boundary. Two simple models of stratification are taken into account, which are scaled with commonly adopted values of the Brunt–Väisälä frequency in the Earth's core. In the absence of magnetic field, we find that both azimuthal wavelength and frequency of the eigenmodes control their penetration into the stratified layer: the higher the phase speed, the higher the permeability of the stratified layer to the wave motion. We also show that the theory developed by Takehiro & Lister for thermal convection extends to the whole family of Rossby waves in the core. Adding a magnetic field, the penetrative behaviour of the quasi-geostrophic modes (the so-called fast branch) is insensitive to the imposed magnetic field and only weakly sensitive to the precise shape of the stratification. Based on these results, the large-scale and high-frequency modes (1–2 month periods) may be detectable in the geomagnetic data measured at the Earth's surface, especially in the equatorial area where the modes can be trapped.

Beschreibung: A number of factors influence the performance of an ejector, e.g. working fluid, geometry and operating conditions. In the present work, six low-environmental-impact working fluids were evaluated for their use in an ejector cooling system running on low-temperature thermal energy. The numerical analysis was based on a model applying the 1D constant-pressure mixing theory. Ejector performance was assessed for the temperatures of the generator, evaporator and condenser in the range of 80–120°C, 5–15°C and 25–40°C, respectively. The results indicated that owing to its high coefficient of performance and moderate operating pressures throughout the entire ejector cycle, isobutane is a good choice for a refrigerant. The area ratio required for running the ejector in critical mode, under changing operating conditions, varied in a significant range regardless of the selected refrigerant. This clearly indicates the importance of a variable geometry ejector design to strengthen the position of ejector cooling systems among other refrigeration technologies.

Beschreibung: The thermal performance of a disc-shaped heat generation body with cooling channels is investigated by using constructal theory based on previous model of heat convection on a disc and previous analytical method of heat conduction on a disc. By taking minimum dimensionless maximum thermal resistance as optimization objective, the optimal aspect ratio of the elemental sector in the radial-pattern disc is obtained for the specified power pumping of the elemental sector; the optimal width ratio of the first-order and elemental cooling channels and the optimal dimensionless radius of the elemental sector are obtained for the specified power pumping of the disc. There exists a critical radius of the disc to determine whether the radial-pattern design and branched-pattern design should be adopted. These conclusions are different from those obtained by Wechsatol et al. 's model, and the essential reason for these differences is that the power pumping is specified in this article, but not the specified flow rate number in Wechsatol et al. 's model. Finally, the assumption about the heat capacity of the coolant and the thermal conductivity of the disc is validated. An analytical method is introduced in this article, which can provide another thought for the constructal optimization of disc with heat convection. The optimal constructs of the discs are obtained for the specified power pumping, which provides some different guidelines for the design of disc with heat convection.

Beschreibung: Capillary pump loop (CPL) is a two-phase heat transfer device considered as a useful solution for thermal control applications in spacecrafts, satellites and electronic components. The purpose of this paper is to study various aspects of the working state of the CPL evaporator. A two-dimensional computational model was developed in order to analyze the flow and the phase transformation inside a cylindrical evaporator. At the present analysis, different cases were studied by changing liquid saturation temperature, inclination angle of the evaporator and the length of the porous heated wick. Water, ammonia, acetone and freon-134 were used as working liquids for numerical experiments. Results present the evaporator capability to vaporize each working liquid and find out its possibility of dry-out causing failure. This information is useful in choosing the best working liquid for an evaporator, enabling bigger amounts of heat to be transferred.

Beschreibung: In the present paper, design of solar chimney (SC) and earth-to-air heat exchanger (EAHE) to meet the thermal need of flat buildings are studied regarding adaptive thermal comfort criteria. Investigation on the effects of geometric features shows that the design of SC with the air gap and outlet sizes of 0.2 m and also EAHE with the diameter and length of 0.5 and 25.0 m reveals better performance. Thermal comfort analysis shows that the SC is capable to power the underground heating system during few hours of the sunny days even at the ambient temperature as low as 0°C and the heating demand of 1000 W without needing the auxiliary devices. In addition, the required numbers of SCs and the underground air channels are strongly influenced by environmental outdoor conditions and heating demand of building and are approximately calculated by: $$\hbox{ room }\phantom{\rule{0.08em}{0ex}}\hbox{ volume/50 }\phantom{\rule{0.08em}{0ex}}\hbox{ and }\phantom{\rule{0.08em}{0ex}}\hbox{ 2 }\times (\hbox{ room }\phantom{\rule{0.08em}{0ex}}\hbox{ volume/50 })+\hbox{ 1, }$$ respectively.

Beschreibung: A 3-D magnetotelluric (MT) inversion code using unstructured tetrahedral elements has been developed in order to correct the topographic effect by directly incorporating it into computational grids. The electromagnetic field and response functions get distorted at the observation sites of MT surveys because of the undulating surface topography, and without correcting this distortion, the subsurface structure can be misinterpreted. Of the two methods proposed to correct the topographic effect, the method incorporating topography explicitly in the inversion is applicable to a wider range of surveys. For forward problems, it has been shown that the finite element method using unstructured tetrahedral elements is useful for the incorporation of topography. Therefore, this paper shows the applicability of unstructured tetrahedral elements in MT inversion using the newly developed code. The inversion code is capable of using the impedance tensor, the vertical magnetic transfer function (VMTF), and the phase tensor as observational data, and it estimates the subsurface resistivity values and the distortion tensor of each observation site. The forward part of the code was verified using two test models, one incorporating topographic effect and one without, and the verifications showed that the results were almost the same as those of previous works. The developed inversion code was then applied to synthetic data from a MT survey, and was verified as being able to recover the resistivity structure as well as other inversion codes. Finally, to confirm its applicability to the data affected by topography, inversion was performed using the synthetic data of the model that included two overlapping mountains. In each of the cases using the impedance tensor, the VMTF and the phase tensor, by including the topography in the mesh, the subsurface resistivity was determined more proficiently than in the case using the flat-surface mesh. Although the locations of the anomalies were not accurately estimated by the inversion using distorted impedance tensors due to the slightly undervalued gain, these locations were correctly estimated by using undistorted impedance tensors or adding VMTFs in the data. Therefore, it can be concluded that the inversion using the unstructured tetrahedral element effectively prevents the misinterpretation of subsurface resistivity and recovers subsurface resistivity proficiently by representing the topography in the computational mesh.

Beschreibung: Separating the contribution of different hematite coercivity grains to the magnetic fabric is a standing problem in rock magnetism because of the common occurrence of thermochemical alterations when measuring the anisotropy of thermal remanence. A technique that eliminates this bias is presented, which is useful when there is a need to separate the fabric of detrital from pigmentary hematite, for example. The method is based on stepwise thermal demagnetization of saturation isothermal remanent magnetizations (IRMs) applied orthogonally on three sister specimens, allowing calculation of the anisotropy tensor from the three components of each demagnetized IRM vector, avoiding the necessity of having to apply IRMs to thermochemically altered specimens. Vector subtraction allows determining the anisotropy tensor for specific unblocking-temperature ranges. The anisotropies of the pigmentary, specular and total hematite of the Mauch Chunk Formation red beds of Pennsylvania have been measured from an oriented block sample and results are compared to previous anisotropy measurements performed using the high-field anisotropy of isothermal remanence technique (hf-AIR), which measures total undifferentiated hematite. Experiments were conducted using non-saturating 1 T and fully saturating 5.5 T fields: both experimental sets seem capable of measuring the orientation of the specularite anisotropy principal axes, but 5.5 T are needed to capture the orientation of the higher coercivity pigmentary grains. The magnitudes of the principal axes, instead, are only faithfully measured using 5.5 T fields and yield somewhat higher anisotropies than those measured by hf-AIR. The fundamental requirement for this technique is homogeneous material among the three sister specimens, which is a significant limitation; homogeneity tests allow assessment of applicability of the method and reliability of the results.

Beschreibung: Archaeomagnetic field models cover longer timescales than historical models and may therefore resolve the motion of geomagnetic features on the core–mantle boundary (CMB) in a more meaningful statistical sense. Here we perform a detailed appraisal of archaeomagnetic field models to infer some aspects of the physics of the outer core. We characterize and compare the identification and tracking of reversed flux patches (RFPs) in order to assess the RFPs robustness. We find similar behaviour within a family of models but differences among different families, suggesting that modelling strategy is more influential than data set. Similarities involve recurrent positions of RFPs, but no preferred direction of motion is found. The tracking of normal flux patches shows similar qualitative behaviour confirming that RFPs identification and tracking is not strongly biased by their relative weakness. We also compare the tracking of RFPs with that of the historical field model gufm1 and with seismic anomalies of the lowermost mantle to explore the possibility that RFPs have preferred locations prescribed by lower mantle lateral heterogeneity. The archaeomagnetic field model that most resembles the historical field is interpreted in terms of core dynamics and core–mantle thermal interactions. This model exhibits correlation between RFPs and low seismic shear velocity in co-latitude and a shift in longitude. These results shed light on core processes, in particular we infer toroidal field lines with azimuthal orientation below the CMB and large fluid upwelling structures with a width of about 80° (Africa) and 110° (Pacific) at the top of the core. Finally, similar preferred locations of RFPs in the past 9 and 3 kyr of the same archaeomagnetic field model suggest that a 3 kyr period is sufficiently long to reliably detect mantle control on core dynamics. This allows estimating an upper bound of 220–310 km for the magnetic boundary layer thickness below the CMB.

Beschreibung: Post-depositional reductive diagenesis usually results in partial or entire cleansing of the pristine palaeomagnetic signal, therefore, its intensity is important to be assessed for sediments that are in the purpose of retrieving palaeomagnetic information. Grain size, rock magnetic and geochemical studies on the entire core, along with scanning electron microscope observations and X-ray diffraction analyses for representative samples were carried out on a Holocene sediment core retrieved from the deep water part of Huguangyan maar lake (HGY), southeast China. The pristine magnetic mineral assemblage of the studied core is domianted by superparamagnetic (SP) and stable single domain titanomagnetite, and high coercivity minerals are not detectable. Based on down-core variations of the average grain size ( M Z ), total organic carbon (TOC), detrital elements (Al, Ti, Fe and Mn) and the concentration and mineralogy of magnetic minerals, the studied core could be divided into three subsections. The uppermost subsection is the least affected by diagenesis, with detrital titanomagnetite as the dominant magnetic mineral. This is owing to low TOC contents, but high detrital input generated by weak Asian summer monsoon intensity during the late Holocene. The intermediate subsection shows down-core progressively enhanced dissolution of detrital titanomagnetite, and concomitant formation of authigenic pyrite and siderite, which indicates down-core progressively enhanced diagenesis generated by down-core progressive increasing TOC content, but decreasing detrital input as the result of down-core progressively strengthened Asian summer monsoon intensity. The pristine magnetic mineral assemblage has been profoundly modified in the lowermost subsection. At certain positions of the lowermost subsection, detrital titanomagnetite has been even completely dissolved via diagenesis, giving place to authigenic pyrite and siderite. High TOC content, but low detrital input generated from strong Asian summer monsoon intensity during the early Holocene are accountable for intensive diagenesis in the lowermost subsection. Complete erasing of detrital magnetic input signal at certain positions of the lowermost subsection, and considerable formation of authigenic siderite indicate that palaeomagnetic records of the studied core have been significantly compromised. The studied core has relatively higher TOC content, lower detrital matter content, calmer sedimentary environments, and less DO available at its water–sediment interface than the cores retrieved at relatively shallower water depths, which all contribute to its relatively stronger diagenesis. Progressive thickening of the upper two subsections with increasing water depth is owing to progressive increase in sedimentation rate with increasing water depth, which is the key factor in determining the thickness of each diagenetic subsection of cores from HGY. It would be better that lake sediments for palaeomagnetic investigations collected at a water depth shallower than the depth of its thermocline.

Beschreibung: The rocks in the crust and the upper mantle of the Earth are believed to exhibit electrical anisotropy to some extent. It is beneficial to further understand and recognize the propagation of the electromagnetic waves in the Earth by investigating the magnetotelluric (which is one of the main geophysical techniques to probe the deep structures in the Earth) responses of the media with anisotropic conductivity structures. In this study, we examine the magnetotelluric fields over an idealized 2-D model consisting of two segments with axially anisotropic conductivity structures overlying a perfect conductor basement by a quasi-static analytic approach. The resulting analytic solution could not only contribute to the electromagnetic induction theory in the anisotropic Earth but also serve as at least an initial standard solution which could be used to validate the reliability and accuracy of the numerical algorithms developed for modelling the magnetotelluric responses of the 2-D media with much more general anisotropic conductivity.

Beschreibung: Several works have reported that haematite has non-linear initial susceptibility at room temperature, like pyrrhotite or titanomagnetite, but there is no explanation for the observed behaviours yet. This study sets out to determine which physical property (grain size, foreign cations content and domain walls displacements) controls the initial susceptibility. The performed measurements include microprobe analysis to determine magnetic phases different to haematite; initial susceptibility (300 K); hysteresis loops, SIRM and backfield curves at 77 and 300 K to calculate magnetic parameters and minor loops at 77 K, to analyse initial susceptibility and magnetization behaviours below Morin transition. The magnetic moment study at low temperature is completed with measurements of zero field cooled–field cooled and AC susceptibility in a range from 5 to 300 K. The minor loops show that the non-linearity of initial susceptibility is closely related to Barkhausen jumps. Because of initial magnetic susceptibility is controlled by domain structure it is difficult to establish a mathematical model to separate magnetic subfabrics in haematite-bearing rocks.

Beschreibung: A series of important geological events occurred in the Tibetan Plateau area during the Jurassic, such as the collision of the Lhasa and Qiangtang Terranes, the closure of the Meso-Tethyan Ocean, the opening of the Neo-Tethyan Ocean and the cessation of the mega-monsoon. The ~3000 m thick Jurassic sedimentary sequence in the Qiangtang Basin on the central Tibetan Plateau, which is called the Yanshiping (YSP) Group, recorded these geological events. However, the chronology of the sequence is surprisingly poorly constrained. Here, we perform a detailed palaeomagnetic analysis on the ~1060 m thick middle and upper portions of the YSP Group (the Xiali and Suowa Formations) in the YSP section of the eastern Qiangtang Basin. Three bivalve zones at stratigraphic intervals of ~40–140, 640–800 and 940–1040 m are identified, which yield a Bathonian–Callovian age for the Lower Xiali Fm., a Callovian–Oxfordian age for the Lower Suowa Fm. and an Oxfordian–Kimmeridgian age for the Upper Suowa Fm. A total of 544 oriented palaeomagnetic samples were collected from the section. By combining thermal and alternating field demagnetizations, clear characteristic remanent magnetization (ChRM) directions are isolated for most of the samples. The robust ChRM directions pass fold and reversals tests, which support the primary nature of the ChRMs and yield a palaeopole at 76.8°N/297.2°E (dp = 2.2°, dm = 3.7°). A total of 27 normal and 26 reversed polarity zones were successfully recorded in the section. Combined with fossil age constraints, results suggest that the section is plausibly composed of a Callovian-Early Kimmeridgian age sedimentary sequence.

Beschreibung: This study investigates pressure effects on the magnetic properties of non-interacting single-domain (SD) magnetite. Using a high-pressure cell specially designed for a Magnetic Property Measurement System, magnetic hysteresis measurements were conducted under high pressures of up to 1 GPa on natural plagioclase crystals containing much acicular SD magnetite. Coercivity and saturation magnetization were nearly constant with pressure, while saturation remanent magnetization and coercivity of remanence decreased with pressure at moderate rates of –8 per cent GPa –1 and –18 per cent GPa –1 , respectively. These results suggest that temperature effects govern the magnetic behaviour of acicular SD magnetite grains in the middle and lower crusts.

Beschreibung: Characterization of geomagnetic field behaviour on timescales of centuries to millennia is necessary to understand the mechanisms that sustain the geodynamo and drive its evolution. As Holocene paleomagnetic and archeomagnetic data have become more abundant, strategies for regularized inversion of modern field data have been adapted to produce numerous time-varying global field models. We evaluate the effectiveness of several approaches to inversion and data handling, by assessing both global and regional properties of the resulting models. Global Holocene field models cannot resolve Southern hemisphere regional field variations without the use of sediments. A standard data set is used to construct multiple models using two different strategies for relative paleointensity calibration and declination orientation and a selection of starting models in the inversion procedure. When data uncertainties are considered, the results are similar overall regardless of whether we use iterative calibration and reorientation, or co-estimation of the calibration and orientation parameters as part of the inversion procedure. In each case the quality of the starting model used for initial relative paleointensity calibration and declination orientation is crucial and must be based on the best absolute information available. Without adequate initial calibration the morphology of dipole moment variations can be recovered but its absolute value will be correlated with the initial intensity calibrations, an effect that might be mitigated by ensuring an appropriate fit to enough high quality absolute intensity data with low uncertainties. The declination reorientation mainly impacts regional field structure and in the presence of non-zonal fields will result in a non-zero local average. The importance of declination orientation is highlighted by inconsistencies in the West Pacific and Australian sediment records in CALS10k.1b model. Great care must also be taken to assess uncertainties associated with both paleomagnetic and age data and to evaluate the effects of poor data distribution. New consistently allocated uncertainty estimates for sediment paleomagnetic records highlight the importance of adequate uncertainties in the inversion process, as they determine the relative weighting among the data and overall normalized misfit levels which in turn influence the complexity of the inferred field models. Residual distributions suggest that the most appropriate misfit measure is the L 1 norm (minimum absolute deviation) rather than L 2 (least squares), but this seems to have relatively minor impact on the overall results. For future Holocene field modelling we see a need for comprehensive methods to assess uncertainty in individual archeomagnetic data so that these data or models derived from them can be used for reliable initial relative paleointensity calibration and declination orientation in sediments. More work will be needed to assess whether co-estimation or an iterative approach to inversion is more efficient overall. This would be facilitated by realistic and globally consistent data and age uncertainties from the paleomagnetic community.

Beschreibung: Galvanic distortion of magnetotelluric (MT) data due to small-scale surficial bodies or due to topography is one of the major factors that prevents accurate imaging of the subsurface. We present a 3-D algorithm for joint inversion of MT impedance tensor data and a frequency-independent full distortion matrix that circumvents this problem. We perform several tests of our algorithm on synthetic data affected by different amounts of distortion. These tests show that joint inversion leads to a better conductivity model compared to the inversion of the MT impedance tensor without any correction for distortion effects. For highly distorted data, inversion without any distortion correction results in strong artefacts and we cannot fit the data to the specified noise level. When the distortion is reduced, we can fit the data to an RMS of one, but still observe artefacts in the shallow part of the model. In contrast, in both cases our joint inversion can fit the data within the assumed noise level and the resulting models are comparable to the inversion of undistorted data. In addition, we show that the elements of the full distortion matrix can be well resolved by our algorithm. Finally, when inverting undistorted data, including the distortion matrix in the inversion only results in a minor loss of resolution. We therefore consider our new approach a promising tool for the general analysis of field MT data.

Beschreibung: In the last decade, interest in heat storage systems has been increasing. These systems will have increasing importance for utilization of solar energy in domestic heating systems. As solar energy is a diurnal cyclic resource, storing excess solar energy for long- or short-term periods will both increase the utilization of solar energy systems and decrease fossil fuel consumption. The relatively new heat storage method using thermochemical storage has shown some significant advantages such as low heat loss (-〉 zero), high heat storage density and low space requirement. These important properties make thermochemical storage a promising alternative for long-term energy storage. In the present study, a numerical investigation on ‘open’ seasonal thermochemical storage has been undertaken. The simulation results show that the volume/mass of the absorbent, mass flow rate and relative humidity of air have significant importance on the reaction kinetics and system performance during the system discharging process. Conversely, total collector area, solar radiation and mass flow rate of air are important parameters during the charging process. The results conclude that, overall, reactor design is the most important factor for storage performance. In addition, reaction advancement ( X ) has a significant importance on process efficiency.

Beschreibung: Photovoltaic (PV) combined with phase change material (PV/PCM) system is a hybrid solar system that uses a PCM to reduce the PV temperature and to store energy for other applications. This study aims to increase the integrated PV efficiency of buildings by incorporating PCM while utilizing the stored heat in PCM for controlling indoor conditions. Experiments have been carried out on a prototype PV/PCM air system using monocrystalline PV modules. Transient simulations of the system performance have also been performed using a commercial computational fluid dynamics package based on the finite volume method. The results from simulation were validated by comparing it with experimental results. The results indicate that PCM is effective in limiting temperature rise in PV device and the heat from PCM can enhance night ventilation and decrease the building energy consumption to achieve indoor thermal comfort for certain periods of time.

Beschreibung: Heat pipes and thermosyphons—devices of high effective thermal conductivity—have been studied for many years for enhancing the performance of solid, liquid and phase change material (PCM) heat stores. However, as the applications of heat storage widen, from micro-electronics thermal control to concentrated solar heat storage and vehicle thermal management, and even for chemical reactor isothermalization, the challenges facing heat storage increasingly are moving from those associated with the ‘standard’ diurnal storage, in itself a problem for low thermal conductivity materials, to response times measured in a few hours or even minutes. While high thermal conductivity metals such as foams can be impregnated with a PCM, for example, to increase local conductivity, the rapid heat input and removal necessitates a more radical approach—heat pipes, possibly with feedback control, with innovative PCM interfaces. This paper reviews the use of heat pipes in conventional and rapid response PCM and liquid or cold storage applications and introduces some novel concepts that might overcome current limitations.

Beschreibung: The effect of different charging infrastructure configurations on the electric-driven distance of plug-in hybrid electric vehicles (e-mileage) has been investigated, using an agent-based traffic simulation. Our findings suggest that the same e-mileage can be achieved with fewer charging poles if the poles support charging from several parking slots around them, and the charging cable is switched from one vehicle to the next. We also find that the charging power supported by most Finnish charging stations, 3.7 kW, and the cable switching delay of 1 h seem to be sufficient for effective workplace charging.

Beschreibung: The magnetic field that originates in the earth's core is transformed across the electrically conducting mantle before being observed, at the earth's surface or above. Assuming that the conductivity depends only on radius, it has been customary to treat the mantle as a linear time-invariant filter for the core magnetic field, with properties (as a function of the frequency ) specified by the transfer function (). An high-frequency approximation to (), which is derived from a three terms WKBJ expansion with –1/2 as small parameter, is found here to reproduce adequately, for low harmonic degrees and/or thin conducting layers, the exact solution, which is evaluated numerically. It is contrasted with the low-frequency estimation of , which consists in a perturbation procedure and in writing () as a series in powers of ( -〉 0). The low-frequency theory is applied to the magnetic variations produced by the geostrophic core flows with about 6 yr period as the phase of these flows is independently determined from their effect on the length of the day. Apart from that, the low-frequency approximation overestimates the screening by the mantle of high-frequency signals, especially the low harmonic degree ones. In practice, the attenuating factor defined from the O ( 2 ) term in the expansion of as -〉 0 cannot be retrieved from analyses of geomagnetic time-series. Application of the mantle filter theory hinges on our knowledge about the time spectrum of the magnetic field at the core surface. The low-frequency theory had been previously applied to observatory series on the assumption that geomagnetic jerks occurring in the core are rare and isolated events. Rather than following up these earlier studies, I note that the spectral density function for the second time derivative of the main magnetic field coefficients is approximately independent of in a frequency range for which the mantle has undoubtedly negligible influence. In the absence of any other information, this scaling law is extrapolated to higher frequencies.

Beschreibung: The magnetic field of the Earth's lithosphere arises from rock magnetization contrasts that were shaped over geological times. The field can be described mathematically in spherical harmonics or with distributions of magnetization. We exploit this dual representation and assume that the lithospheric field is induced by spatially varying susceptibility values within a shell of constant thickness. By introducing a statistical assumption about the power spectrum of the susceptibility, we then derive a statistical expression for the spatial power spectrum of the crustal magnetic field for the spatial scales ranging from 60 to 2500 km. This expression depends on the mean induced magnetization, the thickness of the shell, and a power law exponent for the power spectrum of the susceptibility. We test the relevance of this form with a misfit analysis to the observational NGDC-720 lithospheric magnetic field model power spectrum. This allows us to estimate a mean global apparent induced magnetization value between 0.3 and 0.6 A m –1 , a mean magnetic crustal thickness value between 23 and 30 km, and a root mean square for the field value between 190 and 205 nT at 95 per cent. These estimates are in good agreement with independent models of the crustal magnetization and of the seismic crustal thickness. We carry out the same analysis in the continental and oceanic domains separately. We complement the misfit analyses with a Kolmogorov–Smirnov goodness-of-fit test and we conclude that the observed power spectrum can be each time a sample of the statistical one.

Beschreibung: Data on the evolution of Earth's magnetic field intensity are important for understanding the geodynamo and planetary evolution. However, the paleomagnetic record in rocks may be adversely affected by many physical processes, which must be taken into account when analysing the palaeointensity database. This is especially important in the light of an ongoing debate regarding core thermal conductivity values, and how these relate to the Precambrian geodynamo. Here, we demonstrate that several data sets in the Precambrian palaeointensity database overestimate the true paleofield strength due to the presence of non-ideal carriers of palaeointensity signals and/or viscous re-magnetizations. When the palaeointensity overestimates are removed, the Precambrian database does not indicate a robust change in geomagnetic field intensity during the Mesoproterozoic. These findings call into question the recent claim that the solid inner core formed in the Mesoproterozoic, hence constraining the thermal conductivity in the core to ‘moderate’ values. Instead, our analyses indicate that the presently available palaeointensity data are insufficient in number and quality to constrain the timing of solid inner core formation, or the outstanding problem of core thermal conductivity. Very young or very old inner core ages (and attendant high or low core thermal conductivity values) are consistent with the presently known history of Earth's field strength. More promising available data sets that reflect long-term core structure are geomagnetic reversal rate and field morphology. The latter suggests changes that may reflect differences in Archean to Proterozoic core stratification, whereas the former suggest an interval of geodynamo hyperactivity at ca. 550 Ma.

Beschreibung: Red Clay underlying the loess-palaeosol sequences on the Chinese Loess Plateau is an eolian deposit. There is a controversy over whether magnetic susceptibility ( ) variations in Red Clay sequence can be used as an indicator of summer palaeomonsoon intensity. This study investigates the magnetic mineralogy, magnetic concentration and magnetic grain size distribution of Jiaxian Red Clay with multimagnetic methods. Our results indicate that the magnetic properties of Jiaxian Red Clay are similar to those of the Quaternary loess-palaeosol sequences, and ultrafine ferrimagnetic grains produced during pedogenesis are responsible for an increase in susceptibility, therefore the enhancement mechanism of Red Clay is similar to that of the overlying loess-palaeosol sequences. This paper explores variations in the Red Clay sequence through spatial and temporal analysis. The susceptibility variation of six sites along a NNE to SSW transect correlate to palaeoclimatic cycles, so can be used to trace the summer palaeomonsoon intensity from a spatial perspective. However, a simple loess-derived calibration function cannot be used to quantitative reconstruct the palaeomonsoon intensity variations thought time. An adjusted calibration function for palaeosols from Red Clay sequence needs to be developed, so that can be used to quantitative reconstruct palaeomonsoon intensity. Further study is necessary to develop such a transfer function.

Beschreibung: Palaeointensity experiments were carried out to a sample collection from two sections of basalt lava flow sequences of Pliocene age in north central Iceland (Chron C2An) to further refine the knowledge of the behaviour of the palaeomagnetic field. Selection of samples was mainly based on their stability of remanence to thermal demagnetization as well as good reversibility in variations of magnetic susceptibility and saturation magnetization with temperature, which would indicate the presence of magnetite as a product of deuteric oxidation of titanomagnetite. Among 167 lava flows from two sections, 44 flows were selected for the Königsberger–Thellier–Thellier experiment in vacuum. In spite of careful pre-selection of samples, an Arai plot with two linear segments, or a concave-up appearance, was often encountered during the experiments. This non-ideal behaviour was probably caused by an irreversible change in the domain state of the magnetic grains of the pseudo-single-domain (PSD) range. This is assumed because an ideal linear plot was obtained in the second run of the palaeointensity experiment in which a laboratory thermoremanence acquired after the final step of the first run was used as a natural remanence. This experiment was conducted on six selected samples, and no clear difference between the magnetic grains of the experimented and pristine sister samples was found by scanning electron microscope and hysteresis measurements, that is, no occurrence of notable chemical/mineralogical alteration, suggesting that no change in the grain size distribution had occurred. Hence, the two-segment Arai plot was not caused by the reversible multidomain/PSD effect in which the curvature of the Arai plot is dependent on the grain size. Considering that the irreversible change in domain state must have affected data points at not only high temperatures but also low temperatures, f v ≥ 0.5 was adopted as one of the acceptance criteria where f v is a vectorially defined fraction of the linear segment. A measure of curvature k ' was also used to check the linearity of the selected linear segment. It was avoided, however, to reject the result out of hand by the large curvature k of the entire data points because it might still include a linear segment with a large fraction. Combining with the results of Shaw's experiments, 52 palaeointensities were obtained out of 192 specimens, or 11 flow means were obtained out of the 44 lava flows. Most of the palaeointensities were from the upper part of the lava section (Chron C2An.1n) and ranged between 30 and 66 μT. Including two results from the bottom part of the lava section, the mean virtual dipole moment for 2.5–3.5 Ma is 6.3 ± 1.4  x  10 22 Am 2 ( N  = 11), which is ~19 per cent smaller than the present-day dipole moment.

Beschreibung: The sedimentary sequence deposited during the deglaciation phase following the last glacial maximum in the Storfjorden trough, on the northwestern Barents Sea south of Svalbard, was sampled with 10 piston and gravity cores during the SVAIS and EGLACOM cruises. Three cores (SV-02, SV-03 and SV-05) collected on the upper continental slope are characterized by a thin (20–40 cm) Holocene interval and a thick (up to 4.5 m in core SV-03) late Pleistocene sequence of finely laminated fine-grained sediments that have been interpreted as plumites deposited during the Melt Water Pulse 1a (MWP-1a). Radiocarbon ages obtained at the top and bottom of this stratigraphic interval revealed that deposition occurred during less than two centuries at around 15 ka ago, with a very high sedimentary rate exceeding 3 cm a –1 . We studied the palaeomagnetic and rock magnetic properties of this interval, by taking magnetic measurements at 1 cm spacing on u-channel samples collected from the three cores. The data show that this sequence is characterized by good palaeomagnetic properties and the palaeomagnetic and rock magnetic trends may be correlated at high resolution from core to core. The obtained palaeomagnetic data therefore offer the unique opportunity to investigate in detail the rate of geomagnetic palaeosecular variation (PSV) in the high northern latitudes at a decadal scale. Notwithstanding the palaeomagnetic trends of the three cores may be closely matched, the amplitude of directional PSV and the consequent virtual geomagnetic pole (VGP) scatter (S) is distinctly higher in one core (SV-05) than in the other two cores (SV-02 and SV-03). This might result from a variable proportion of two distinct populations of magnetic minerals in core SV-05, as suggested by the variable tendency to acquire a gyromagnetic remanent magnetization at high fields during the AF demagnetization treatment. For the plumite interval of cores SV-02 and SV-03, where the magnetic mineralogy is uniform and magnetite is the main magnetic carrier, a S value of about 9° is obtained. We consider this value as a reliable approximation of palaeomagnetic secular variation at a latitude of 75°N over a time interval spanning a couple of centuries around 15 ka ago.

Beschreibung: A recent study of the Matuyama–Brunhes (M-B) geomagnetic field reversal recorded in exposed lacustrine sediments from the Sulmona Basin (Italy) provided a continuous, high-resolution record indicating that the reversal of the field direction at the terminus of the M-B boundary (MBB) occurred in less than a century, about 786 ka ago. In the sediment, thin (4–6 cm) remagnetized horizons were recognized above two distinct tephra layers—SUL2-19 and SUL2-20—that occur ~25 and ~35 cm below the MBB, respectively. Also, a faint, millimetre-thick tephra (SUL2-18) occurs 2–3 cm above the MBB. With the aim of improving the temporal resolution of the previous Sulmona MBB record and understanding the possible influence of cryptotephra on the M-B record in the Sulmona Basin, we performed more detailed sampling and analyses of overlapping standard and smaller samples from a 50 cm-long block that spans the MBB. The new data indicate that (i) the MBB is even sharper than previously reported and occurs ~2.5 cm below tephra SUL2-18, in agreement with the previous study; (ii) the MBB coincides with the rise of an intensity peak of the natural remanent magnetization (NRM) intensity, which extends across SUL2-18; (iii) except for a 2-cm-thick interval just above tephra SUL2-18, the rock magnetic parameters ( k , ARM, M r , M s , B c , B cr ) indicate exactly the same magnetic mineralogy throughout the sampled sequence. We conclude that either SUL2-18 resulted in the remagnetization of an interval of about 6 cm (i.e. during the NRM intensity peak spanning ~260 ± 110 yr, according to the estimated local sedimentation rate), and thus the detailed MBB record is lost because it is overprinted, or the MBB is well recorded, occurred abruptly about 2.5 cm below SUL2-18 and lasted less than 13 ± 6 yr. Both hypotheses challenge our understanding of the geomagnetic field behaviour during a polarity transition and/or of the NRM acquisition process in the Sulmona lacustrine sediment.

Beschreibung: We test the ability of large-scale velocity fields inferred from geomagnetic secular variation data to produce the global magnetic field of the Earth. Our kinematic dynamo calculations use quasi-geostrophic (QG) flows inverted from geomagnetic field models which, as such, incorporate flow structures that are Earth-like and may be important for the geodynamo. Furthermore, the QG hypothesis allows straightforward prolongation of the flow from the core surface to the bulk. As expected from previous studies, we check that a simple QG flow is not able to sustain the magnetic field against ohmic decay. Additional complexity is then introduced in the flow, inspired by the action of the Lorentz force. Indeed, on centennial timescales, the Lorentz force can balance the Coriolis force and strict quasi-geostrophy may not be the best ansatz. When our columnar flow is modified to account for the action of the Lorentz force, magnetic field is generated for Elsasser numbers larger than 0.25 and magnetic Reynolds numbers larger than 100. This suggests that our large-scale flow captures the relevant features for the generation of the Earth's magnetic field and that the invisible small-scale flow may not be directly involved in this process. Near the threshold, the resulting magnetic field is dominated by an axial dipole, with some reversed flux patches. Time dependence is also considered, derived from principal component analysis applied to the inverted flows. We find that time periods from 120 to 50 yr do not affect the mean growth rate of the kinematic dynamos. Finally, we note that the footprint of the inner core in the magnetic field generated deep in the bulk of the shell, although we did not include one in our computations.

Beschreibung: The Auca Mahuida volcano (2.03–0.88 Ma) located east of the Andean thrust front in the Neuquén basin (Argentina) hosts an oil system of thermogenic origin and is affected by the NW–SE striking-faults. Intrusive bodies and the underlying Jurassic sediments constitute the reservoir rocks. Aeromagnetic data collected in the Auca Mahuida area detected multiple dipolar magnetic anomalies, many of which have reverse polarity. Palaeomagnetic measurements on rock samples collected in the field together with available age determinations indicate that the reversely magnetized sources were mainly emplaced during the Matuyama reverse polarity chron while the normal polarity sources were emplaced during the Olduvai and/or Jaramillo subchrons. The location and geometry of the intrusive bodies is poorly known and the customary magnetic inversion is rendered difficult because of multiple natural remanent magnetization directions. To address these difficulties, a voxel inversion was applied to model the vector residual magnetic intensity (VRMI) transformation of the observed total magnetic intensity data. The modelling showed a 1.5 km deep, subcircular ring-shaped intrusion below the summit of the volcano and a series of NW–SE elongated, fault-controlled intrusive bodies to depths up to 3–4 km. Our results show that magnetic data and VRMI modelling help resolve the geometry of the shallow plumbing system of volcanoes with remanently magnetized sources, and estimate the depth and geometry of potential oil reservoirs in volcanic areas.

Beschreibung: Was the Yukon-Tanana Terrane (YTT), a California-sized part of south-central Yukon, an autochthonous or para-autochthonous part of northern British Columbia in the Early Cretaceous or was it part of a proposed allochthonous ‘Baja B.C.’ continent offshore of southern California? To answer this fundamental question, a paleomagnetic study has been completed on 347 specimens from 24 sites in the 114.7 ± 1.1 Ma Quiet Lake batholith. This 1300 km 2 pluton is composed mostly of massive medium-to-coarse grained biotite quartz monzonite that exhibits no evidence of either deformation or metamorphism, and that intrudes metamorphosed pre-Cretaceous basement rocks of the YTT in southern Yukon. The paleomagnetic analysis utilized thermal and alternating field step demagnetization, and saturation isothermal remanence methods. A well-defined characteristic remanent magnetization (ChRM) direction was isolated throughout the 500–585 °C temperature range at Decl. = 340.6°, Incl. = 77.4° ( N = 14 sites, k = 51.2, A 95 = 5.6°). The ChRM resides in magnetite with a low titanium content and is interpreted to be a primary thermoremanent magnetization. After correction for 490 km of geologically demonstrable dextral displacement on the inboard Tintina fault zone, the Quiet Lake batholith's paleopole is not significantly different at 95 per cent confidence from the co-eval 115 Ma reference paleopole for North America, giving non-significant translation and rotation estimates of 1.4° ± 5.1° (1) northwestwards and 10° ± 13° (1) clockwise, respectively. Thus, this is the first Early Cretaceous paleopole to show clearly that the YTT in Yukon is a para-autochthon that was part of North America's continental margin at that time. Further, after correction for Tintina fault displacement, the eight available Mesozoic YTT paleopoles agree closely with the North American apparent polar wander path (APWP). In contrast, the 22 paleopoles from the Intermontane Belt show the expected behaviour of an allochthonous thin-skin of terranes (i.e. ‘Baja B.C.’ behaviour) and record ~8° of northward translation and ~50° of clockwise rotation relative to both the YTT and North American APWPs during the Mesozoic and Paleogene.

Beschreibung: There exists a fundamental as well as practical interest in being able to accurately forecast the future evolution of Earth's magnetic field at decadal to secular ranges. This work enables such forecasts by combining geomagnetic data with an Earth-like numerical model of a convection-driven fluid dynamo. The underlying data assimilation framework builds on recent progress in inverse geodynamo modelling, a method which estimates an internal dynamic structure for Earth's core from a snapshot of the magnetic field and its instantaneous rate of change at the surface, and takes advantage of linear relationships and long-range correlations between observed and hidden state variables. Here the method is further evolved into a single-epoch ensemble Kalman filter, in order to initialise at a given epoch an ensemble of states compatible with the observations and representative of the uncertainties in the estimation of hidden quantities. The ensemble dynamics, obtained by subsequent numerical integration of the prognostic model equations, are found to be governed by a thermal wind balance or equilibrium between buoyancy forces, the Coriolis force and the pressure gradient. The resulting core fluid flow pattern is a quasi-steady eccentric gyre organised in a column parallel to Earth's rotation axis, in equilibrium with a longitudinal hemispheric convective density anomaly pattern. The flow provides induction for the magnetic field, which also undergoes a realistic amount of diffusion. Predictions of the present magnetic field from data taken within the past century show that the ensemble has an average retaining good consistency with the true geomagnetic evolution and an acceptable spread well representative of prediction errors, up to at least a secular range. The predictability of the geodynamo thus appears to significantly exceed previous theoretical expectations based on the chaotic divergence of ensemble members. The assimilation generally outperforms the linear mathematical extrapolations from a 30-yr prediction range onwards, with a 40 per cent improvement in Earth-surface error at a secular range. The geomagnetic axial dipole decay observed over the past two centuries is predicted to continue at a similar pace in the next century, with a further loss of $1.1\pm 0.3 \hspace{2.84526pt}\mathrm{\mu T}$ by year 2115. The focal (or minimum intensity) point of the South Atlantic geomagnetic anomaly is predicted to enter the South Pacific region in the next century, with the anomaly itself further deepening and widening. By year 2065, the minimum intensity is predicted to decrease by $1.46\pm 0.4 \hspace{2.84526pt}\mathrm{\mu T}$ at the Earth surface and the focal point to move 12.8 ± 1.4 deg westwards with a slight northward component. This corresponds to a drift rate of 0.26 deg yr –1 , similar to the typical geomagnetic westward drift observed over the past four centuries. The same drift rate is also predicted until 2115 with a further (but more uncertain) intensity decrease.

Beschreibung: Understanding the contribution of biogenic magnetic particles into sedimentary assemblages is a current challenge in palaeomagnetism. It has been demonstrated recently that magnetic particles produced through biologically controlled mineralization processes, such as magnetosomes from magnetotactic bacteria, contribute to the recording of natural remanent magnetization in marine and lacustrian sediments. Contributions from other, biologically induced, mineralization types, which are known from multiple laboratory experiments to include magnetic minerals, remain largely unknown. Here, we report magnetic properties of iron minerals formed by a community of iron- and manganese-reducing bacteria isolated from a natural groundwater deposit during a 2 yr long incubation experiment. The main iron phases of the biomineralized mass are lepidocrocite, goethite and magnetite, each of which has environmental significance. Unlike the majority of the previous studies that reported superparamagnetic grain size, and thus no remanence carrying capacity of biologically induced magnetite, hysteresis and first-order reversal curves measurements in our study have not detected significant superparamagnetic contribution. The biomineralized mass, instead, contains a mixture of single-domain to pseudo-single-domain and multidomain magnetite particles that are capable of carrying a stable chemical remanent magnetization. Isothermal remanent magnetization acquisition parameters and first-order reversal curves signatures of the biomineralized samples deviate from previously proposed criteria for the distinction of extracellular (biologically induced) magnetic particles in mixtures. Given its potential significance as a carrier of natural remanent magnetization, environmental requirements, distribution in nature and the efficiency in the geomagnetic field recording by biologically induced mineralization need comprehensive investigation.

Beschreibung: Heat pipe heat exchangers could be employed as run-around coils in air conditioning systems for enhanced dehumidification and cooling. This article reviews some of the works conducted on the cooling and dehumidification aspects in various air conditioning systems. They have been proved to be effective in enhancing dehumidification and reducing air conditioning costs especially in hot and humid tropical countries.

Beschreibung: The mitigation options to meet the ambitious carbon reduction targets set by the UK government are discussed in this paper, including the use of carbon capture and storage (CCS) technology, clean renewable energy integration and a proposed system of integrated fuel cell combined heat and power (FC-CHP) technology. Analysis shows that the use of CCS technology within the current infrastructure can abate half the electricity-associated CO 2 emissions; however, this comes at a high cost penalty. The emissions associated with domestic heat cannot be prevented without changes in the energy infrastructure. Hydrogen-powered fuel cells can provide clean energy at a range of scales and high efficiencies, especially when employed with a CHP system. However, production of CO 2 -free hydrogen is essential for fuel cell technology to contribute substantially to a low carbon economy globally. In this work, three methods were investigated for small-scale distributed hydrogen production, namely steam methane reforming, water electrolysis (WE) and cold plasma jet (CPJ). The criteria used for comparisons include the associated CO 2 emissions and the cost of energy production. CPJ decomposition of methane shows a high potential when combined with integrated FC-CHP technology for economically viable and CO 2 -free generation of energy, especially in comparison to WE. Including the value of the solid carbon product makes the plasma system most attractive economically.

Beschreibung: Monthly means of the magnetic field measurements at ground observatories are a key data source for studying temporal changes of the core magnetic field. However, when they are calculated in the usual way, contributions of external (magnetospheric and ionospheric) origin may remain, which make them less favourable for studying the field generated by dynamo action in the core. We remove external field predictions, including a new way of characterizing the magnetospheric ring current, from the data and then calculate revised monthly means using robust methods. The geomagnetic secular variation (SV) is calculated as the first annual differences of these monthly means, which also removes the static crustal field. SV time-series based on revised monthly means are much less scattered than those calculated from ordinary monthly means, and their variances and correlations between components are smaller. On the annual to decadal timescale, the SV is generated primarily by advection in the fluid outer core. We demonstrate the utility of the revised monthly means by calculating models of the core surface advective flow between 1997 and 2013 directly from the SV data. One set of models assumes flow that is constant over three months; such models exhibit large and rapid temporal variations. For models of this type, less complex flows achieve the same fit to the SV derived from revised monthly means than those from ordinary monthly means. However, those obtained from ordinary monthly means are able to follow excursions in SV that are likely to be external field contamination rather than core signals. Having established that we can find models that fit the data adequately, we then assess how much temporal variability is required. Previous studies have suggested that the flow is consistent with torsional oscillations (TO), solid body-like oscillations of fluid on concentric cylinders with axes aligned along the Earth's rotation axis. TO have been proposed to explain decadal timescale changes in the length-of-day. We invert for flow models where the only temporal changes are consistent with TO, but such models have an unacceptably large data misfit. However, if we relax the TO constraint to allow a little more temporal variability, we can fit the data as well as with flows assumed constant over three months, demonstrating that rapid SV changes can be reproduced by rather small flow changes. Although the flow itself changes slowly, its time derivative can be locally (temporally and spatially) large, in particular when and where core surface secular acceleration peaks. Spherical harmonic expansion coefficients of the flows are not well resolved, and many of them are strongly correlated. Averaging functions, a measure of our ability to determine the flow at a given location from the data distribution available, are poor approximations to the ideal, even when centred on points of the core surface below areas of high observatory density. Both resolution and averaging functions are noticeably worse for the toroidal flow component, which dominates the flow, than the poloidal flow component, except around the magnetic equator where averaging functions for both components are poor.

Beschreibung: A multistage continuous isothermal endoreversible chemical engine system with a finite driving fluid is investigated in this paper, and the mass transfer law obeys the linear mass transfer law [ $$g\propto \mathrm{\Delta }\mu $$ ]. Under the condition that both the initial time and the initial key component concentration in the driving fluid are fixed, the maximum power output of the multistage chemical engine system and the corresponding optimal concentration configuration of the key component in the driving fluid are derived by applying Hamilton–Jacobi–Bellman (HJB) theory, and numerical examples for three different boundary conditions are given. The results show that the difference between the chemical potential of the key component and the Carnot chemical potential for the maximum power output is a constant, and the key component concentration in the driving fluid decreases with the increase of time nonlinearly; when both the process period and the final concentration of the key component are fixed, there is an optimal control strategy for the maximum power output of the multistage chemical engine system, and the maximum power outputs of the system and the corresponding optimal control strategies are different for different final concentrations. The obtained results can provide some theoretical guidelines for the optimal designs and operations of practical energy conversion systems.

Beschreibung: Recently, several studies have been conducted regarding the Atkinson cycle and Atkinson engine which have resulted in various thermal efficiency and output power analysis. In the present study, output power and engine thermal efficiency are maximized via employing the NSGA-II approach and thermodynamic analysis. The multi-objective evolutionary approach on the basis of the NSGA-II method is implemented throughout this work for optimizing the above-mentioned variables. To evaluate the aforementioned goal, two objective functions which comprises the power output ( W ) and cycle efficiency ( ) have been included in the optimization process simultaneously.

Beschreibung: The electrical rock conductivity is a sensitive indicator for carbon dioxide (CO 2 ) injection and migration processes. For a reliable balancing of the free CO 2 in pore space with petrophysical models such as Archie's law or for the detection of migrating CO 2 , detailed knowledge of the pore water conductivity during interaction with CO 2 is essential but not available yet. Contrary to common assumptions, pore water conductivity cannot be assumed constant since CO 2 is a reactive gas that dissolves into the pore water in large amounts and provides additional charge carriers due to the dissociation of carbonic acid. We consequently carried out systematic laboratory experiments to quantify and analyse the changes in saline pore water conductivity caused by CO 2 at thermodynamic equilibrium. Electrical conductivity is measured on pore water samples for pressures up to 30 MPa and temperatures up to 80 °C. The parameter range covers the gaseous, liquid and supercritical state of the CO 2 involved. Pore water salinities from 0.006 up to 57.27 g L –1 sodium chloride were investigated as well as selective other ion species. At the same time, the CO 2 concentration in the salt solution was determined by a wet-chemical procedure. A two-regime behaviour appears: for small salinities, we observe an increase of up to more than factor 3 in the electrical pore water conductivity, which strongly depends on the solution salinity (low-salinity regime). This is an expected behaviour, since the additional ions originating from the dissociation of carbonic acid positively contribute to the solution conductivity. However, when increasing salinities are considered this effect is completely diminished. For highly saline solutions, the increased mutual impeding causes the mobility of all ions to decrease, which may result in a significant reduction of conductivity by up to 15 per cent despite the added CO 2 (high-salinity regime). We present the data set covering the pressure, temperature, salinity and ion species dependence of the CO 2 effect. Furthermore, the observations are analysed and predicted with a semi-analytical formulation for the electrical pore water conductivity taking into account the species’ interactions. For the applicability of our results in practice of exploration and monitoring, we additionally provide a purely empirical formulation to compute the impact of CO 2 on pore water conductivity at equilibrium which only requires the input of pressure, temperature and salinity information.

Beschreibung: Although the Matuyama–Brunhes boundary (MBB) in the Chinese Loess Plateau (CLP) is very important in reliably correlating Quaternary loess with other sediments in the world, particularly with marine and polar ice cores, its exact stratigraphic position remains controversial. Previous investigations usually placed the MBB between paleosol unit S8 and loess unit L8 in various locations. To better understand the spatial differences in the MBB position, a high-resolution paleomagnetic study was conducted in a loess section of the Lantian Basin at the southern margin of the CLP. The results show that the MBB is situated in the middle of the relatively weak paleosol unit S7, consistent with a recent report on the MBB based on a 10 Be study from the Xifeng and Luochuan loess sections of the central CLP. However, the regional anomalously low magnetic susceptibility in paleosols S7 and S8 indicates that it is more reliable to determine the paleoclimate boundaries between loess and paleosol horizons of this segment with median grain size. Then, the MBB in the Yushan section can be correlated with the bottom of paleosol S7, corresponding to the older part of interglacial marine isotope stage 19. This result temporally reconciles the striking discrepancy of the position of the MBB recorded in between loess and other typical sedimentary sequences, and further confirms that the stratigraphic position of the MBB could spatially vary to a certain extent due to regional sedimentary or paleoclimatic conditions in the marginal areas of the CLP. In the Yushan section, the high-frequency variations of paleomagnetic directions during a long period of ~31 ka before the MBB, however, could not be attributed to a genuine response to the true geomagnetic behaviour. Moreover, the climate offset defined by the magnetic susceptibility and median grain size of the section can be preliminarily attributed to the regional geology and paleoenvironment background. A multiproxy-based stratigraphic division is considered very necessary when paleomagnetic and climatic boundaries are defined exactly in a specific area of the southern CLP.

Beschreibung: We study rotating thermal convection in spherical shells as prototype for flow in the cores of terrestrial planets, gas planets or in stars. We base our analysis on a set of about 450 direct numerical simulations of the (magneto)hydrodynamic equations under the Boussinesq approximation. The Ekman number ranges from 10 –3 to 10 –5 . The supercriticality of the convection reaches about 1000 in some models. Four sets of simulations are considered: non-magnetic simulations and dynamo simulations with either free-slip or no-slip flow boundary conditions. The non-magnetic setup with free-slip boundaries generates the strongest zonal flows. Both non-magnetic simulations with no-slip flow boundary conditions and self-consistent dynamos with free-slip boundaries have drastically reduced zonal-flows. Suppression of shear leads to a substantial gain in heat-transfer efficiency, increasing by a factor of 3 in some cases. Such efficiency enhancement occurs as long as the convection is significantly influenced by rotation. At higher convective driving the heat-transfer efficiency tends towards that of the classical non-rotating Rayleigh–Bénard system. Analysis of the latitudinal distribution of heat flow at the outer boundary reveals that the shear is most effective at suppressing heat-transfer in the equatorial regions. Simulations with convection zones of different thickness show that the zonal flows become less energetic in thicker shells, and, therefore, their effect on heat-transfer efficiency decreases. Furthermore, we explore the influence of the magnetic field on the non-zonal flow components of the convection. For this we compare the heat-transfer efficiency of no-slip non-magnetic cases with that of the no-slip dynamo simulations. We find that at E = 10 –5 magnetic field significantly affects the convection and a maximum gain of about 30 per cent (as compared to the non-magnetic case) in heat-transfer efficiency is obtained for an Elsasser number of about 3. Our analysis motivates us to speculate that convection in the polar regions in dynamos at E = 10 –5 is probably in a ‘magnetostrophic’ regime.

Beschreibung: ‘Anomalous’ magnetic fabrics in dikes that appear to indicate flow into the wall confound many workers. Here, we present extensive magnetic data on five dikes from Tenerife, Canary Islands, and use these to interpret the causes of the anomalous fabrics. Comparison of the anisotropy of magnetic susceptibility (AMS) and anhysteretic magnetization (AARM) results show that, in some cases, the anomalous fabrics are caused by single-domain grains, which produce AMS fabrics perpendicular to the grain elongation, whereas AARM fabrics are parallel. To check this, hysteresis experiments were used to characterize the domain state. These show most are mixtures of pseudo-single-domain or single-domain plus multi-domain particles, but many have wasp-waisted hysteresis loops, likely indicating mixed populations of stable single-domain and superparamagnetic grains. First-order reversal curves were used to better characterize this and show mixtures of stable single-domain and superparamagnetic grains dominate the magnetic signal. Magnetic particles at the stable single-domain/superparamagnetic threshold are unstable at timespans relevant to the analytical techniques, so they produce complicated results. This suggests that anomalous AMS fabrics in dikes cannot simply be attributed to elongated stable single-domain particles and that mixtures of the different grain types can produce hybrid fabrics, in which the fabrics are neither perpendicular or parallel to the dike plane, that are difficult to interpret without extensive magnetic analysis.

Beschreibung: We derive scaling relationships for planetary dynamos based on a balance between energy production and Joule dissipation, and between the curl of the buoyancy and Coriolis forces. These scaling relationships are deduced for the particular case of dynamos driven by helical waves, but are shown to have a much broader applicability. They are consistent with the evidence of the numerical dynamos, yielding predictions consistent with published empirical scaling laws and also with the observed transition from dipolar to multipolar dynamos. A direct comparison with the observational evidence for the planets is hampered by the fact that we do not know what sets the smallest scale of the motion in the planets. Nevertheless, we use our scaling relationships to show that the traditional assumption that the Elsasser number is of order unity is inconsistent with the observation that the gas-giant dynamos are dipolar dynamos, as is the more recent suggestion that the strength of the dipole is independent of rotation rate and controlled by the buoyancy flux alone. On the other hand, we show that the observational data is consistent with the hypothesis that a dipolar dynamo saturates at the lowest permissible magnetic energy compatible with a given buoyancy flux.

Beschreibung: We present a detailed palaeomagnetic study from 35 sites on Holocene lava flows of the Tongariro Volcanic Centre, central North Island, New Zealand. Prior to the study the eruption ages of these flows were constrained to within a few thousand years by recently published high-precision 40 Ar/ 39 Ar geochronological data and tephrostratigraphic controls. Correlation of flow mean palaeomagnetic directions with a recently published continuous sediment record from Lake Mavora, Fiordland, allows us to reduce the age uncertainty to 300–500 yr in some cases. Our refined ages significantly improve the chronology of Holocene effusive eruptions of the volcanoes of the Tongariro Volcanic Centre. For instance, differences in the palaeomagnetic directions recorded by lavas from the voluminous Iwikau and Rangataua members suggest that individual effusive periods lasted up to thousands of years and that these bursts have been irregularly spaced over time. While over the last few millennia the effusive eruptive activity from Mt Ruapehu has been relatively quiet, the very young age (200–500 BP) of a Red Crater sourced flow suggests that effusive activity around Mt Tongariro lasted into the past few centuries. This adds an important hazard context to the historical record, which has otherwise comprised frequent relatively small, tephra producing, explosive eruptions without the production of lava flows.

Beschreibung: The inversion of magnetotelluric data into subsurface electrical conductivity poses an ill-posed problem. Smoothing constraints are widely employed to estimate a regularized solution. Here, we present an alternative inversion scheme that estimates a sparse representation of the model in a wavelet basis. The objective of the inversion is to determine the few non-zero wavelet coefficients which are required to fit the data. This approach falls into the class of sparsity constrained inversion schemes and minimizes the combination of the data misfit in a least-squares 2 sense and of a model coefficient norm in an 1 sense ( 2 - 1 minimization). The 1 coefficient norm renders the solution sparse in a suitable representation such as the multiresolution wavelet basis, but does not impose explicit structural penalties on the model as it is the case for 2 regularization. The presented numerical algorithm solves the mixed 2 - 1 norm minimization problem for the nonlinear magnetotelluric inverse problem. We demonstrate the feasibility of our algorithm on synthetic 2-D MT data as well as on a real data example. We found that sparse models can be estimated by inversion and that the spatial distribution of non-vanishing coefficients indicates regions in the model which are resolved.

Beschreibung: We examined the mathematical and computational aspects of the magnetic potential, vector and gradient tensor fields of a tesseroid in a geocentric spherical coordinate system (SCS). This work is relevant for 3-D modelling that is performed with lithospheric vertical scales and global, continent or large regional horizontal scales. The curvature of the Earth is significant at these scales and hence, a SCS is more appropriate than the usual Cartesian coordinate system (CCS). The 3-D arrays of spherical prisms (SP; ‘tesseroids’) can be used to model the response of volumes with variable magnetic properties. Analytical solutions do not exist for these model elements and numerical or mixed numerical and analytical solutions must be employed. We compared various methods for calculating the response in terms of accuracy and computational efficiency. The methods were (1) the spherical coordinate magnetic dipole method (MD), (2) variants of the 3-D Gauss–Legendre quadrature integration method (3-D GLQI) with (i) different numbers of nodes in each of the three directions, and (ii) models where we subdivided each SP into a number of smaller tesseroid volume elements, (3) a procedure that we term revised Gauss–Legendre quadrature integration (3-D RGLQI) where the magnetization direction which is constant in a SCS is assumed to be constant in a CCS and equal to the direction at the geometric centre of each tesseroid, (4) the Taylor's series expansion method (TSE) and (5) the rectangular prism method (RP). In any realistic application, both the accuracy and the computational efficiency factors must be considered to determine the optimum approach to employ. In all instances, accuracy improves with increasing distance from the source. It is higher in the percentage terms for potential than the vector or tensor response. The tensor errors are the largest, but they decrease more quickly with distance from the source. In our comparisons of relative computational efficiency, we found that the magnetic potential takes less time to compute than the vector response, which in turn takes less time to compute than the tensor gradient response. The MD method takes less time to compute than either the TSE or RP methods. The efficiency of the (GLQI and) RGLQI methods depends on the polynomial order, but the response typically takes longer to compute than it does for the other methods. The optimum method is a complex function of the desired accuracy, the size of the volume elements, the element latitude and the distance between the source and the observation. For a model of global extent with typical model element size (e.g. 1 degree horizontally and 10 km radially) and observations at altitudes of 10s to 100s of km, a mixture of methods based on the horizontal separation of the source and observation separation would be the optimum approach. To demonstrate the RGLQI method described within this paper, we applied it to the computation of the response for a global magnetization model for observations at 300 and 30 km altitude.

Beschreibung: Kamacite particles (Fe–Ni, Ni 〈 5 per cent), are very common in extra-terrestrial materials, such as meteorites. It is normally assumed that for kamacite particles to be reliable recorders of magnetic fields, they need to be magnetically uniform (single domain, SD) and thermally stable. Larger particles subdivide into non-uniform multidomain (MD) magnetic structures that produce weaker magnetic signals, while small SD particles become magnetically unstable due to thermal fluctuations and exhibit superparamagnetic behaviour. In this paper we determine the first micromagnetic calculation of the stable SD range domain-state phase diagram for metallic iron; previous calculations were analytical. There is a significant increase in the critical size for the SD/MD threshold size, for example, for cube-shaped iron particles, the critical SD/MD threshold has now been estimated to be 25 nm, compared to 17 nm for previous estimates. The larger critical SD/MD threshold size for iron, agrees better with previously published nanometric observations of domain state for FeNi particles, then early analytical models.

Beschreibung: This paper presents a distributed magnetotelluric inversion scheme based on adaptive finite-element method (FEM). The key novel aspect of the introduced algorithm is the use of automatic mesh refinement techniques for both forward and inverse modelling. These techniques alleviate tedious and subjective procedure of choosing a suitable model parametrization. To avoid overparametrization, meshes for forward and inverse problems were decoupled. For calculation of accurate electromagnetic (EM) responses, automatic mesh refinement algorithm based on a goal-oriented error estimator has been adopted. For further efficiency gain, EM fields for each frequency were calculated using independent meshes in order to account for substantially different spatial behaviour of the fields over a wide range of frequencies. An automatic approach for efficient initial mesh design in inverse problems based on linearized model resolution matrix was developed. To make this algorithm suitable for large-scale problems, it was proposed to use a low-rank approximation of the linearized model resolution matrix. In order to fill a gap between initial and true model complexities and resolve emerging 3-D structures better, an algorithm for adaptive inverse mesh refinement was derived. Within this algorithm, spatial variations of the imaged parameter are calculated and mesh is refined in the neighborhoods of points with the largest variations. A series of numerical tests were performed to demonstrate the utility of the presented algorithms. Adaptive mesh refinement based on the model resolution estimates provides an efficient tool to derive initial meshes which account for arbitrary survey layouts, data types, frequency content and measurement uncertainties. Furthermore, the algorithm is capable to deliver meshes suitable to resolve features on multiple scales while keeping number of unknowns low. However, such meshes exhibit dependency on an initial model guess. Additionally, it is demonstrated that the adaptive mesh refinement can be particularly efficient in resolving complex shapes. The implemented inversion scheme was able to resolve a hemisphere object with sufficient resolution starting from a coarse discretization and refining mesh adaptively in a fully automatic process. The code is able to harness the computational power of modern distributed platforms and is shown to work with models consisting of millions of degrees of freedom. Significant computational savings were achieved by using locally refined decoupled meshes.

Beschreibung: A spatially averaged mean-field model for fully or partially ordered members of the ilmenite–hematite solid solution series is rigorously derived from the Heisenberg Hamiltonian by first assuming no temporal correlation of atomic spins, and then by spatially averaging over spins at equivalent atomic positions. The model is based on the geometry of exchange interactions between nearest and next-nearest neighbours and predicts magnetization curves in homogenous solid solutions with variable degree of order. While the general framework presented can also be applied to atomic scale models, and to other solid solution series, here the symmetries of the ilmenite–hematite lattice are exploited to show that four different sublattice magnetizations and six independent combinations of exchange constants determine the temperature variation of the magnetization curves. Comparing measured Curie temperatures T C and M s ( T ) curves to model predictions results in accurate constraints for these combinations. It is also possible to calculate predictions for high-field magnetization slopes HF , which not only improve accurate experimental determination of the Curie temperature but also provide a new magnetic method to estimate the order parameter for ilmenite–hematite solid solution samples.

Beschreibung: Tibetan Plateau uplift and global cooling have generally been thought to have caused the drying of the Asian inland, but how and when these factors drove the aridification is unknown. The Xining Basin at the NE Tibetan Plateau received continuous Eocene–Miocene fine-grained sediments, providing an excellent opportunity to address this question. Here we present detailed rock magnetic and diffuse reflectance spectroscopy (DRS) analyses for a well-dated Cenozoic sedimentary record from the Xiejia section in the basin. Magnetic susceptibility ( ), saturation magnetization (Ms) and saturation isothermal remanent magnetization (SIRM) in this section show a long-term decreasing trend from ~52 to ~25 Ma, well coinciding with global cooling and drying in the region, and an increasing trend since ~25 Ma, which is in contrast to the further progressing aridification of the basin. Thermomagnetic results and DRS-determined hematite contents suggest that the relative content of magnetite and hematite is the main control on the , Ms and SIRM values. We argue that the long-term Eocene–Oligocene global cooling increased the drying of the Asian inland, lowering the lake level and exposing a larger area to low temperature oxidation for longer times, thus producing more hematite and leading to the decreasing trend of magnetic concentration parameters from ~52 to ~25 Ma. An intensive uplift of the NE Tibetan Plateau since ~25 Ma, associated with a change in the sedimentary source, might be responsible for the increase of , Ms and SIRM after 25 Ma.

Beschreibung: The Mt Amram igneous complex (AIC) represents northern tip of the Neoproterozoic Arabian Nubian Shield (ANS). For the first time the AIC deep structure was studied using the gravity, aero and ground magnetic, magnetic susceptibility and density measurements and geological data. Analysing all available data at the Amram area we concluded what only monzonite body can be reason for gravity high and coinciding reduced to pole (RTP) maximum. Geological knowledge allowed suggesting its intrusive character and compact body form. Cluster of inverse solutions (Werner deconvolution) localized this body as initial model for forward modelling. Further iterations (2 3/4 -D forward modelling) clarified the monzonite geometry and properties; the modelling allowed also to investigate the non-uniqueness and estimate also the confident intervals for final solution. The research consists three interconnected stages. At the detailed scale, ground magnetic data suggested three magmatic blocks of few hundred meters shifted dextral about 100 m along the Zefunut fault. Estimated accuracy for geometry of the magnetic bodies is a few tens metres. At the middle scale, quantitative gravity and magnetic interpretations provide model of the monzonite body, which is an order of magnitude more than the volume of the felsic rhyolites and granite rocks. Boundary of the whole monzonite body was estimated with accuracy as a hundred meters. As a result we suggest that the parent magma for the AIC is the monzonite, similar to the model suggested for the Timna Igneous Complex 12 km north of the AIC. The model developed can be applied to evaluate the subsurface volumes of the mafic magmatic rocks in adjacent locations. At the regional scale for exposed the Sinai and Arab Saudi Precambrian crystalline shield our approach allows to understand the apparent contradiction between geological predominantly granite composition (low magnetic rocks) and magnetic data. The aeromagnetic data show number strong magnetic anomalies suggesting the presence large volume of high magnetic (mainly basic) rocks at the depth. This problem is proposed for future research.

Beschreibung: 3-D electromagnetic (EM) studies of the Earth have advanced significantly over the past decade. Despite a certain success of the 3-D EM inversions of real data sets, the quantitative assessment of the recovered models is still a challenging problem. It is known that one can gain valuable information about model uncertainties from the analysis of Hessian matrix. However, even with modern computational capabilities the calculation of the Hessian matrix based on numerical differentiation is extremely time consuming. Much more efficient way to compute the Hessian matrix is provided by an ‘adjoint sources’ methodology. The computation of Hessian matrix (and Hessian-vector products) using adjoint formulation is now well-established approach, especially in seismic inverse modelling. As for EM inverse modelling we did not find in the literature a description of the approach, which would allow EM researchers to apply this methodology in a straightforward manner to their scenario of interest. In the paper, we present formalism for the efficient calculation of the Hessian matrix using adjoint sources approach. We also show how this technique can be implemented to calculate multiple Hessian-vector products very efficiently. The formalism is general in the sense that it allows to work with responses that arise in EM problem set-ups either with natural- or controlled-source excitations. The formalism allows for various types of parametrization of the 3-D conductivity distribution. Using this methodology one can readily obtain appropriate formulae for the specific sounding methods. To illustrate the concept we provide such formulae for two EM techniques: magnetotellurics and controlled-source sounding with vertical magnetic dipole as a source.

Beschreibung: Geomagnetic jerks are sudden changes of trend in the geomagnetic secular variation. The Earth's mantle behaves as a filter for the jerks, causing a delayed and a smoothed signal at the Earth's surface. Backus' mantle filter theory relies on approximating the impulse response function (IRF) of the mantle by a Gaussian. The advantage of this theory is the linear relation between jerks’ delay times and the mantle electrical conductivity, as expressed by kernels. However, the limitations of this theory arise when negative delay and/or smoothing times occur. The applicability of the mantle filter theory is examined by analysing the validity of the Gaussian as an approximation for the composite IRF (CIRF) at a given location. We show that the electrical conductivity of the lower mantle is mostly responsible for the jerk delay time. Alternating sign CIRFs might cause negative delay and/or smoothing times which prevents the use of the mantle filter theory. Adequate/inadequate Gaussian approximations to the CIRFs give small/large differences in the convolved jerk occurrence times. Most observatories yield positive time constants, but in most cases the difference in the jerk occurrence times exceeds 0.5 yr.

Beschreibung: A new method of estimating fluid flows near the core–mantle boundary is presented. Both the geomagnetic diffusion and dynamics in a boundary layer are taken into account under the no-slip condition at the core–mantle boundary. Below the boundary layer, the tangentially geostrophic constraint is imposed on the flow to be estimated. The radial component of the geomagnetic field just within the core is calculated from the radial component and its partial derivatives with respect to the radius, first, derived from continuity of the solenoidal field across the finite jump in electrical conductivity and, second, the geomagnetic diffusion. Below the boundary layer, fluid motions thus derived show some features common to those estimated on the basis of the frozen-flux approximation, and their accompanying vortices at mid and high latitudes are well correlated with upwellings or downwellings inside the boundary layer. The positional relation of upwellings and downwellings in equatorial regions inside and below the boundary layer suggests existence of columnar convective cells there. Intense magnetic flux spots seen in equatorial regions are likely to be produced not by downwellings at tops of cyclonic columns but by flux expulsion due to upwellings between adjacent columnar flows. The present new method leads to a new insight on core surface flows that have not been noted so far.

Beschreibung: In most numerical simulations of the Earth's core the dynamo resides outside the tangent cylinder and may be crudely classified as being of the α 2 type. In this region the flow comprises a sea of thin columnar vortices aligned with the rotation axis, taking the form of alternating cyclones and anticyclones. The dynamo is thought to be driven by these columnar vortices within which the flow is observed to be highly helical, helicity being a crucial ingredient of planetary dynamos. As noted in Davidson, one of the mysteries of this dynamo cartoon is the origin of the helicity, which is observed to be positive in the south and negative in the north. While Ekman pumping at the mantle can induce helicity in some of the overly viscous numerical simulations, it is extremely unlikely to be a significant source within planets. In this paper we return to the suggestion of Davidson that the helicity observed in the less viscous simulations owes its existence to helical wave packets, launched in and around the equatorial plane where the buoyancy flux is observed to be strong. Here we show that such wave packets act as a potent source of planetary helicity, constituting a simple, robust mechanism that yields the correct sign for h north and south of the equator. Since such a mechanism does not rely on the presence of a mantle, it can operate within both the Earth and the gas giants. Moreover, our numerical simulations show that helical wave packets dispersing from the equator produce a random sea of thin, columnar cyclone/anticyclone pairs, very like those observed in the more strongly forced dynamo simulations. We examine the local dynamics of helical wave packets dispersing from the equatorial regions, as well as the overall nature of an α 2 -dynamo driven by such wave packets. Our local analysis predicts the mean emf induced by helical waves, an analysis that rests on a number of simple approximations which are consistent with our numerical experiments, while our global analysis yields exact integral relationships between the mean emf induced by the wave packets and the large-scale dipole and azimuthal field. Combining these local and integral equations yields a kinematic model for an α 2 -dynamo driven by helical waves. Order-of-magnitude estimates based on these equations suggest that such a dynamo is indeed feasible.

Beschreibung: The Lower Danube Basin is one of the most important loess regions from Europe, which have provided excellent archives for long-term high-resolution palaeoclimate studies. The aim of this paper is to derive new information on the Middle–Late Pleistocene palaeoenvironment from a high resolution multiproxy assessment of the iron mineralogical composition at the Costinesti loess-palaeosol sequence located on the western Black Sea shore. It is the easternmost loess section in the Romanian loess region studied and its distinct pattern of the proxy records can be used to correlate the lower Danube loess to other key sites of the Moldavia and Ukraine loess regions. To investigate the climatic control on soft and hard ferromagnetic minerals we used several types of rock magnetic properties: magnetic susceptibility and its frequency dependence, anhysteretic remanent magnetization, isothermal remanent magnetization, hysteresis properties and FORC distributions, an unmixing model for isothermal remanent magnetization curves and high field (up to 8 T) isothermal remanence measurements. Our results show that the palaeosol horizons, formed during interglacials and climatically more favored periods of the Pleistocene, experienced pedogenic alteration, resulting in high amounts of superparamagnetic, single domain and pseudosingle domain magnetite/maghemite grains and hematite. The loess layers, formed during glacial periods, are mainly dominated by multidomain and/or pseudosingle domain oxidized magnetite and some hematite, all probably of aeolian origin. Goethite contribution is probably minor and constant both in loess and palaeosol horizons. We review the correlation of the loess sections from the lower Danube basin concluding that the new results can be interpreted as a support for the transition of a Mediterranean type climate to a steppe type climate in the last two interglacial periods in the western Black Sea. Because the pattern of magnetic susceptibility data from the lower Danube basin is changing relative fast with distance from the Black Sea shore, it probably reflects the local influence of the Black Sea on continental scale climatic oscillations during the last 600 ka. The values of background magnetic susceptibility of the Romanian loess-palaeosol sections indicate that the main source area of the dust changed during this climatic transition. Our analysis also shows that the age of the loess-palaeosol sections from the Eastern European low lands (Moldavia and Ukraine) must be revised to be in agreement with the chronostratigraphy of the sections from the Lower Danube Basin loess area.

Beschreibung: Statistical models of geomagnetic secular variations in terms of a Giant Gaussian Process (GGP) are compared with palaeontensity databases (Brunhes epoch, effusive rocks). We tested two GGP models TK and QC (suggested by Tauxe-Kent and Quidelleur-Courtillot) against 392 volcanic palaeointensity data, and found both models to be incompatible with the data. Even though at present there is no accepted GGP model of the Brunhes chron, we found interesting to clarify the details of this negative test. While such an incompatibility is clear enough for the TK model, because of its too small dipole coefficient, the incompatibility of the QC model was due the 12 per cent of the data with very small intensities; remaining 88 per cent of data is fully compatible with QC model QC. The troublesome, low-palaeointensity records belong to different sites and ages so their excess presence is not an effect of particular location or time. We found no evidence that the marked discrepancy between the empirical data and theoretical calculations on the QC model can be explained by the possibility that the low-intensity values belong to known excursions of the geomagnetic field. As an alternative, we conjecture that selected low-intensity values can possibly stem from acquisition of chemical remanent magnetization instead of the thermoremanence.

Beschreibung: A new method of estimating fluid flows near the core–mantle boundary is presented. Both the geomagnetic diffusion and dynamics in a boundary layer are taken into account under the no-slip condition at the core–mantle boundary. Below the boundary layer, the tangentially geostrophic constraint is imposed on the flow to be estimated. The radial component of the geomagnetic field just within the core is calculated from the radial component and its partial derivatives with respect to the radius, first, derived from continuity of the solenoidal field across the finite jump in electrical conductivity and, second, the geomagnetic diffusion. Below the boundary layer, fluid motions thus derived show some features common to those estimated on the basis of the frozen-flux approximation, and their accompanying vortices at mid and high latitudes are well correlated with upwellings or downwellings inside the boundary layer. The positional relation of upwellings and downwellings in equatorial regions inside and below the boundary layer suggests existence of columnar convective cells there. Intense magnetic flux spots seen in equatorial regions are likely to be produced not by downwellings at tops of cyclonic columns but by flux expulsion due to upwellings between adjacent columnar flows. The present new method leads to a new insight on core surface flows that have not been noted so far.

Beschreibung: Practical applications of controlled-source electromagnetic (EM) modelling require solutions for multiple sources at several frequencies, thus leading to a dramatic increase of the computational cost. In this paper, we present an approach using block Krylov subspace solvers that are iterative methods especially designed for problems with multiple right-hand sides (RHS). Their main advantage is the shared subspace for approximate solutions, hence, these methods are expected to converge in less iterations than the corresponding standard solver applied to each linear system. Block solvers also share the same preconditioner, which is constructed only once. Simultaneously computed block operations have better utilization of cache due to the less frequent access to the system matrix. In this paper, we implement two different block solvers for sparse matrices resulting from the finite-difference and the finite-element discretizations, discuss the computational cost of the algorithms and study their dependence on the number of RHS given at once. The effectiveness of the proposed methods is demonstrated on two EM survey scenarios, including a large marine model. As the results of the simulations show, when a powerful preconditioning is employed, block methods are faster than standard iterative techniques in terms of both iterations and time.

Beschreibung: Loess deposits in the arid Central Asia contain valuable information on the evolution of local aridification and dust sources in the Northern Hemisphere. Xinjiang is located in the eastern part of Central Asia and previous researches have revealed the complex enhancement of magnetic susceptibility in loess–paleosol sequences. However, systematic magnetic archives of loess deposit in this arid Asian interior are still far from adequate. In this study, magnetic parameters combined with nonmagnetic properties (granulometry and chromaticity) were analysed on a loess section in Shawan (SW), northwestern China. The section shares a similar magnetic composition with those in the Chinese Loess Plateau (CLP) as well as other sites in Xinjiang. Ferrimagnetic components (magnetite and maghemite) dominate the magnetic signal while the contribution of antiferromagnetic phases (like hematite and goethite) and paramagnetic portions are relatively low. There is no specific correlation between magnetic concentration and pedogenic intensity in the SW section. In general, magnetic enhancement was largely influenced by the paleowind intensity. However, a positive correlation between magnetic susceptibility and pedogenesis is observed in the upper part (0–3.5 m depths), which is characterized by a moderate wind intensity. Moreover, pedogenesis might be responsible for the enhancement of fine magnetic particles in paleosols. Magnetic properties are controlled by coarse magnetic particles in the pseudo-single domain state, but a coarse stable single domain phase was found in certain paleosol samples. The input of detrital fractions from a nearby dust source probably controlled the magnetic properties while a superparamagnetic fraction, which has been deemed as a product of pedogenesis in the CLP, is limited in the SW section. Caution is needed to employ magnetic susceptibility directly for paleoclimatic assessment because of its uncertainty in the Xinjiang loess. However, the ARM /SIRM ratio enhanced in paleosols and has more potential as an alternative index for the weakly pedogenic degree in this area.

Beschreibung: Mantle control on the geodynamo is often simulated using numerical dynamos with imposed outer boundary heat flux inferred from lower mantle tomography, assuming that seismic and thermal anomalies in the lowermost mantle are highly correlated. However, non-thermal effects might perturb this idealized linear seismic–thermal mapping. Here we use a probabilistic tomography model to isolate the thermal part of the seismic anomaly in order to impose a more realistic core–mantle boundary heat flux pattern on the outer boundary of numerical dynamo simulations. We demonstrate that on time average these dynamo models have more low-latitude convective and magnetic activity than corresponding models with conventional tomographic heat flux. In addition, the low-latitude magnetic flux and kinetic energy contributions are more time-dependent in the dynamo models with a probabilistic tomography heat flux, and thus may recover the observed latitudinal distribution of geomagnetic flux on the core–mantle boundary, which we propose as a morphological criterion for Earth-like dynamo models.

Beschreibung: The statistics of directional data on a sphere can be modelled either using the Fisher distribution that is conditioned on the magnitude being unity, in which case the sample space is confined to the unit sphere, or using the latitude–longitude marginal distribution derived from a trivariate Gaussian model that places no constraint on the magnitude. These two distributions are derived from first principles and compared. The Fisher distribution more closely approximates the uniform distribution on a sphere for a given small value of the concentration parameter, while the latitude–longitude marginal distribution is always slightly larger than the Fisher distribution at small off-axis angles for large values of the concentration parameter. Asymptotic analysis shows that the two distributions only become equivalent in the limit of large concentration parameter and very small off-axis angle.

Beschreibung: With advancing computational resources, 3-D inversion techniques have become feasible in recent years and are now a more widely used tool for magnetotelluric (MT) data interpretation. Galvanic distortion caused by small-scale near-surface inhomogeneities remains an obstacle for 3-D MT inversion which so far has experienced little attention. If not considered properly, the effect on 3-D inversion can be immense and result in erroneous subsurface models and interpretations. To tackle the problem we implemented inversion of the distortion-free phase tensor into the ModEM inversion package. The dimensionless phase tensor components describe only variations of the conductivity structure. When inverting these data, particular care has to be taken of the conductivity structure in the a priori model, which provides the reference frame when transferring the information from phase tensors into absolute conductivity values. Our results obtained with synthetic data show that phase tensor inversion can recover the regional conductivity structure in presence of galvanic distortion if the a priori model provides a reasonable assumption for the regional resistivity average. Joint inversion of phase tensor data and vertical magnetic transfer functions improves recovery of the absolute resistivity structure and is less dependent on the prior model. We also used phase tensor inversion for a data set of more than 250 MT sites from the central San Andreas fault, California, where a number of sites showed significant galvanic distortion. We find the regional structure of the phase tensor inversion results compatible with previously obtained models from impedance inversion. In the vicinity of distorted sites, phase tensor inversion models exhibit more homogeneous/smoother conductivity structures.

Beschreibung: The efficient use of combined heat and power (CHP) systems in buildings presents a control challenge due to their simultaneous production of thermal and electrical energy. The use of thermal energy storage coupled with a CHP engine provides an interesting solution to the problem—the electrical demands of the building can be matched by the CHP engine, while the resulting thermal energy can be regulated by the thermal energy store. Based on the thermal energy demands of the building the thermal store can provide extra thermal energy or absorb surplus thermal energy production. This paper presents a multi-input multi-output inverse-dynamics-based control strategy that will minimise the electrical grid utilisation of a building, while simultaneously maintaining a defined operative temperature. Electrical demands from lighting and appliances within the building are considered. In order to assess the performance of the control strategy, a European Standard validated simplified dynamic building physics model is presented that provides verified heating demands. Internal heat gains from solar radiation and internal loads are included within the model. Results indicate the control strategy is effective in minimising the electrical grid use and maximising the utilisation of the available energy when compared with conventional heating systems.

Beschreibung: The power and the efficiency of a triple-shaft open intercooled, recuperated gas turbine cycle are analyzed and optimized based on the model established using thermodynamic optimization theory in Part 1 of this paper by adjusting the low-pressure compressor inlet relative pressure drop, the mass flow rate and the distribution of pressure losses along the flow path. First, the power output is optimized by adjusting the intercooling pressure ratio, the air mass flow rate or the distribution of pressure losses along the flow path. Second, the thermodynamic first-law efficiency is optimized subject to a fixed fuel flow rate and a fixed overall size by seeking the optimal intercooling pressure ratio, the compressor inlet pressure drop and optimal flow area allocation ratio between the low-pressure compressor inlet and the power turbine outlet. The numerical examples show that increase in effectiveness of intercooler increases power output and its corresponding efficiency and increase in effectiveness of recuperator decreases power output appreciably but increases its corresponding efficiency; there exist an optimal low-pressure compressor inlet relative pressure drop and an optimal intercooling pressure ratio, which lead to a maximum power. For a fixed fuel mass rate and a fixed overall area of low-pressure compressor inlet and power turbine outlet, maximum thermodynamic first-law efficiency is obtained by optimizing low-pressure compressor inlet relative pressure drop and intercooling pressure ratio. The double-maximum thermodynamic first-law efficiency is obtained by searching optimal flow area allocation between low-pressure compressor inlet and power turbine outlet.

Beschreibung: With non-renewable energy sources depleting quickly, solar energy could prove a viable option owing to its abundance and eco-friendliness. Modeling and simulation of a solar energy-driven single-stage absorption chiller was carried out using the transient simulation software ‘TRNSYS’. An evacuated tube collector coupled with an insulated tank served as heat source for the absorption chiller. Experiments were conducted to evaluate the efficiency parameters of the collector as well as the loss coefficient for the storage tank. These parameters along with standard chiller performance data were used to model the system. The influence of climatic conditions, storage capacity and various control schemes with and without auxiliary heating on the output of the system is analyzed and presented in the paper.

Beschreibung: Earth's liquid core hosts a diverse set of waves with periods ranging from days to thousands of years. One class of waves with periods of several decades is known to arise from an interplay between magnetic, Archimedes and Coriolis forces. These so-called MAC waves are thought to be relevant for interpreting historical fluctuations in the geomagnetic field. In this study, we show that MAC waves provide a good description of time-dependent zonal flow at the top of the core. The same collection of waves also offers a simple explanation for observed fluctuations in the dipole field. Both of these predictions require a stratified layer at the top of the core with a thickness of 130–140 km and a buoyancy frequency comparable to Earth's rotation rate. We extend these predictions to include changes in the length of day (LOD) and find that MAC waves can account for about half of the observed fluctuation at decadal periods. Larger fluctuations are possible when electromagnetic stresses couple MAC waves to flow in the interior of the core. In fact, an idealized model for the coupled motion overestimates the LOD fluctuations, probably reflecting limitations in this idealized model. Our results offer support for stable stratification at the top of the core and suggest a common origin for decadal fluctuations in the geomagnetic field and the LOD.

Beschreibung: A detailed magnetic analysis has been conducted on the borehole CJ-1 (172.3 m in length) from the Changjiang (Yangtze) River delta. Results show that the dominant magnetic carriers are magnetite and hematite. Palaeomagnetic results reveal that high-frequency changes in palaeomagnetic inclinations are tied significantly to abnormal anisotropy of magnetic susceptibility (AMS) patterns due to effects of the high-energy depositional environment in this region. On the basis of AMS patterns, doubtful palaeomagnetic directional anomalies can be distinguished from authentic palaeomagnetic excursions. Magnetostratigraphic results indicate that the Matuyama–Brunhes boundary (MBB) was recorded at a depth of ~152.5 m. The presence of several short-lived inclination anomalies implied that the sedimentation could be continuous even at the millennial timescale at certain depth intervals bracketing these fast geomagnetic events. In summary, our study provides new insights into constructing reliable magnetostratigraphy in the delta region. Moreover, our new magnetostratigraphy of the Changjiang River delta deposits will facilitate studies on the relevant long-term palaeoenvironmental evolution of the delta.

Beschreibung: Non-stoichiometric monoclinic 4C pyrrhotite (Fe 7 S 8 ) is a major magnetic remanence carrier in the Earth's crust and in extraterrestrial materials. Because of its low-temperature magnetic transition around 30 K also known as Besnus transition, which is considered to be an intrinsic property, this mineral phase is easily detectable in natural samples. Although the physical properties of pyrrhotite have intensively been studied, the mechanism behind the pronounced change in magnetization at the low-temperature transition is still debated. Here we report magnetization experiments on a pyrrhotite crystal (Fe 6.6 S 8 ) that consists of a 4C and an incommensurate 5C* superstructure that are different in their defect structure. The occurrence of two superstructures is magnetically confirmed by symmetric inflection points in hysteresis measurements above the transition at about 30 K. The disappearance of the inflection points and the associated change of the hysteresis parameters indicate that the two superstructures become strongly coupled to form a unitary magnetic anisotropy system at the transition. From this it follows that the Besnus transition in monoclinic pyrrhotite is an extrinsic magnetic phenomenon with respect to the 4C superstructure and therefore the physics behind it is in fact different from that of the well-known Verwey transition.

Beschreibung: Based upon the theoretical principle of the thermochemical energy storage pumping pipe system, a new cooling system has been presented. In order to analyse the performance and design of the system based on adsorption pumping pipe process, a simplified mathematical model is developed. Both simulation and experimental results are given and discussed. The comparison of various methods (ammonium dissolves, evaporation of CO 2 , etc.) showed that it is the simplest and most reliable to use adsorbents such as zeolite in this cooling system. A total of 250 g zeolite 13X could reduce the temperature of 330 ml by 15°C in 2–3 min (for beverage self-cooling applications). For future work, a large scale demonstration system is required to prove the viability and long term performance of thermochemical cooling/energy storage system.

Beschreibung: Considering the flow processes of the working fluid with the pressure drops, a thermodynamic model for a triple-shaft open intercooled-recuperated gas turbine cycle is established using thermodynamic optimization theory in Part 1 of this paper. The relative pressure drops associated with the flow through various cross-sectional areas are derived as functions of the low-pressure compressor inlet relative pressure drop. The analytical formulae of the cycle's power and efficiency are derived. The performance of the model cycle is optimized by adjusting the compressor inlet pressure, the mass flow rate and the distribution of pressure losses along the flow path in Part 2 of this paper.

Beschreibung: Surface nuclear magnetic resonance technique, also called magnetic resonance sounding (MRS), is an emerging geophysical method that can detect the presence and spatial variations of the subsurface water content directly. In this paper, we introduce the MRS central loop geometry, in which the receiver loop is smaller than the transmitter loop and placed in its centre. In addition, using a shielded receiver coil we show how this configuration greatly increases signal-to-noise ratio and improves the resolution of the subsurface layers compared to the typically used coincident loop configuration. We compare sensitivity kernels for different loop configurations and describe advantages of the MRS central loop geometry in terms of superior behaviour of the sensitivity function, increased sensitivity values, reduced noise level of the shielded receiver coil, improved resolution matrix and reduced instrument dead time. With no extra time and effort in the field, central-loop MRS makes it possible to reduce measurement time and to measure data in areas with high anthropogenic noise. The results of our field example agree well with the complementary data, namely airborne electromagnetics, borehole data, and the hydrologic model of the area.

Beschreibung: Frictional heating during earthquake rupture reveals important information on earthquake mechanisms and energy dissipation. The amount of annealing varies widely and is, as yet, poorly constrained. Here we use magnetic susceptibility versus temperature measurements during cycling to increasingly elevated temperatures to constrain the maximum temperature a slip zone has experienced. The case study comprises sheared clay cored from the Japan Trench subduction plate-boundary fault zone (décollement), which accommodated the large slip of the 2011 M w 9.0 Tohoku-oki earthquake. The décollement was cored during the Integrated Ocean Drilling Program (IODP) Expedition 343, the Japan Trench Fast Drilling Project (JFAST). Heating signatures with estimated maximum temperatures ranging from ~300 to over 500 °C are determined close to the multiple slip surfaces within the décollement. Since it is impossible to tie a specific slip surface to a certain earthquake, thermal evidence for the cumulative effect of several earthquakes is unveiled. This as yet preliminary rock magnetic ‘geothermometer’ would be a useful tool to detect seismic heating along faults that experienced medium temperature rise, a range which is difficult to assess with other approaches.

Beschreibung: Feldspars are the most abundant rock-forming minerals in the Earth's crust, but their magnetic properties have not been rigorously studied. This work focuses on the intrinsic magnetic anisotropy of 31 feldspar samples with various chemical compositions. Because feldspar is often twinned or shows exsolution textures, measurements were performed on twinned and exsolved samples as well as single crystals. The anisotropy is controlled by the diamagnetic susceptibility and displays a consistent orientation of principal susceptibility axes; the most negative or minimum susceptibility is parallel to [010], and the maximum (least negative) is close to the crystallographic [001] axis. However, the magnetic anisotropy is weak when compared to other rock-forming minerals, 1.53 x 10 –9 m 3 kg –1 at maximum. Therefore, lower abundance minerals, such as augite, hornblende or biotite, often dominate the bulk paramagnetic anisotropy of a rock. Ferromagnetic anisotropy is not significant in most samples. In the few samples that do show ferromagnetic anisotropy, the principal susceptibility directions of the ferromagnetic subfabric do not display a systematic orientation with respect to the feldspar lattice. These results suggest that palaeointensity estimates of the geomagnetic field made on single crystals of feldspar will not be affected by a systematic orientation of the ferromagnetic inclusions within the feldspar lattice.

Beschreibung: Feldspars are the most abundant rock-forming minerals in the Earth's crust, but their magnetic properties have not been rigorously studied. This work focuses on the intrinsic magnetic anisotropy of 31 feldspar samples with various chemical compositions. Because feldspar is often twinned or shows exsolution textures, measurements were performed on twinned and exsolved samples as well as single crystals. The anisotropy is controlled by the diamagnetic susceptibility and displays a consistent orientation of principal susceptibility axes; the most negative or minimum susceptibility is parallel to [010], and the maximum (least negative) is close to the crystallographic [001] axis. However, the magnetic anisotropy is weak when compared to other rock-forming minerals, 1.53 x 10 –9 m 3 kg –1 at maximum. Therefore, lower abundance minerals, such as augite, hornblende or biotite, often dominate the bulk paramagnetic anisotropy of a rock. Ferromagnetic anisotropy is not significant in most samples. In the few samples that do show ferromagnetic anisotropy, the principal susceptibility directions of the ferromagnetic subfabric do not display a systematic orientation with respect to the feldspar lattice. These results suggest that palaeointensity estimates of the geomagnetic field made on single crystals of feldspar will not be affected by a systematic orientation of the ferromagnetic inclusions within the feldspar lattice.

Beschreibung: Palaeomagnetic data obtained from archaeological materials are used for reconstructions of the Earth's magnetic field of the past millennia. While many studies tested the reliability of this recorder for palaeointensity only a few studies did this for direction. The study presents an archaeomagnetic and rock magnetic investigation applied to an experimental pottery kiln, which was operated in 2003 to produce stone ware. This kind of high-quality pottery needs a temperature of at least 1160 °C. Shortly before heating of the kiln direct absolute measurements of the absolute geomagnetic field vector have been carried out close to it. After cooling of the kiln 24 oriented palaeomagnetic samples have been taken. Although Curie temperatures are about 580 °C, that is the typical temperature for magnetite, thermal as well as alternating field demagnetisations reveal also a considerable amount of hematite as magnetic carrier. This mixture of magnetite and hematite is dominated by pseudo-single domain grains. Demagnetisation removed in some cases weak secondary components, but in most cases the specimens carried a single component thermoremanent magnetisation. The mean characteristic remanent magnetisation direction agrees on 95 per cent confidence level with the directly measured field direction. Archaeointensity was obtained from five specimens with the Thellier–Coe method and with the multiple-specimen palaeointensity domain-state corrected method. Six of these specimens also provided a result of the Dekkers–Böhnel method, which overestimated the archaeointensity by about 9 per cent compared to the direct value, while after correction for fraction the value agrees very well. For the multiple-specimen palaeointensity domain-state corrected method only fractions between 25 and 75 per cent have been used and specimens showing alteration have been excluded. Above 450 °C many specimens showed alteration of the magnetic grains. Because median destructive temperatures were often above this value in most cases the fraction was less than 50 per cent. Nevertheless the obtained intensity (48.48 ± 0.24 μ) is on 95 per cent confidence level in agreement with the direct observation. Behaviour of the specimens during the Thellier-experiments was not ideal because of narrow unblocking temperature spectra and alteration. Nevertheless, the obtained mean archaeointensity is also in agreement with the direct field observation. Here the relative palaeointensity error is about 6 per cent and very high compared the multiple-specimen palaeointensity domain-state corrected method. The investigation demonstrates that a pottery kiln can provide a very precise estimate of the ancient geomagnetic field vector.

Beschreibung: We present a new model of the radial (1-D) conductivity structure of Earth's mantle. This model is derived from more than 10 yr of magnetic measurements from the satellites Ørsted, CHAMP, SAC-C and the Swarm trio as well as the global network of geomagnetic observatories. After removal of core and crustal field as predicted by a recent field model, we fit the magnetic data with spherical harmonic coefficients describing ring current activity and associated induction effects and estimate global C -responses at periods between 1.5 and 150 d. The C -responses are corrected for 3-D effects due to induction in the oceans and inverted for a 1-D model of mantle conductivity using both probabilistic and deterministic methods. Very similar results are obtained, consisting of a highly resistive upper mantle, an increase in conductivity in and beneath the transition zone and a conductive lower mantle. Analysis of the Hessian of the cost function reveals that the data are most sensitive to structures at depths between 800 and 1200 km, in agreement with the results obtained from the probabilistic approach. Preliminary interpretation of the inverted conductivity structure based on laboratory-based conductivity profiles shows that the recovered structure in the lower mantle either requires higher temperatures or the presence of material of high conductivity related to ponding of carbonate melts below the transition zone.

Beschreibung: A prominent gravity and geoid low lies just south of the Lofoten peninsula in northern Norway, partly coinciding with the location of Proterozoic granites of the Transscandinavian Igneous Belt and being offset by ca . 100 km to the highest topography of northern Norway. The study area extends both onshore and offshore and lies at the transition between Archaean and Proterozoic lithosphere. The Palaeoproterozoic basement has been overthrusted by the Palaeozoic nappes of the Caledonian orogen and now forms the passive margin of the NE Atlantic. We investigate the gravity anomaly performing combined 3-D geophysical-petrological forward modelling of the lithosphere and sublithospheric upper mantle using the interactive modelling program LitMod3D. We include variations in thickness and composition of the lithospheric mantle in order to include the effects on the rifted margin adjoining the Baltic craton. We compare three possible origins of the anomaly: (i) a low-density upper crust, representing the northward extension of the Transscandinavian Igneous Belt, (ii) a lower crustal source formed by a Moho depression and (iii) a thick, depleted lithospheric mantle of possibly Archaean origin. A similar, yet wider and stronger gravity anomaly is found on the conjugate margin in northeastern Greenland. A shallow crustal source is most consistent with the geophysical data sets. A respective source of the granitic belt, however, is difficult to reconcile with the regional geology both in Fennoscandia and Greenland. An additional contribution form a deeper source is suggested.

Beschreibung: The performance of a solid sorption refrigeration system that uses SrCl 2 and NH 3 as the working pair is analysed based on the heat and mass transfer aspects of the solid sorbent reactors (absorber/generator). The transient, heat and mass transfer model duly considers the effects of reactor wall mass and contact conductance between the reactor wall and the bed. A decent comparison is obtained between the theoretical results and published experimental results on a reactor. The complete system consisting of two absorber/generators, condenser, expansion valve and evaporator is then analysed using the heat and mass transfer model of the reactors. Results are obtained in terms of the coefficient of performance (COP) and specific cooling power (SCP). Results show the possibility of optimizing the bed and operating parameters so as to obtain high COP and/or SCP. The bed thickness, sink temperature and the global reaction advancement are found to affect the performance of the system significantly.

Beschreibung: Analysis of more than 10 yr of vertical magnetic transfer function (VTF) estimates obtained at 12 mid-latitude sites, located in different continents and tectonic settings, reveals significant temporal variations for a period range between approximately 250 and 2000 s. The most ubiquitous pattern is a seasonal modulation of the VTF element that relates the vertical to the horizontal north–south magnetic components ( Tx ), which shows a high peak around the June solstice (and a low peak around the December solstice) regardless of the location of the site. To quantify the influence of this source effect on the amplitude of VTFs, we modelled the temporal variations of VTFs using a function with dependence on season and magnetic activity indexes. The model shows that differences between VTF estimates obtained at seasonal peaks can reach 0.08 of Tx absolute values and that the effect increases with latitude and period. Seasonal variations are observed also in the VTF component relating vertical to horizontal east–west magnetic components ( Ty ), but here the pattern with respect to the geographic distribution is less clear. In addition to seasonal trends, we observe long-term modulations correlating with the 11-yr solar cycle at some sites. The influence of these external source effects should be taken into account, before attempting a geological interpretation of the VTFs. It can be misleading, for example, to combine or compare VTFs obtained from long-period geomagnetic data acquired at different seasons or years. An effective method to estimate and remove these source effects from VTFs is by comparison with temporal variations of VTFs from synchronously recorded data at sites located at similar latitude (〈5° of difference) and longitude (〈10° of difference). Source effects in temporal variations of VTFs can be identified as those patterns that exhibit similar amplitudes and significant correlation with the geomagnetic activity at all compared sites. We also provide a second-order polynomial which can be used to estimate the amplitude of the seasonal variations in the Tx component globally as a function of latitude.

Beschreibung: Directions recovered from palaeomagnetic samples are usually archived with some quantitative information about their precision, most often in the form of a so-called α 95 angle. Such angles are classically co-estimated with the recovered palaeomagnetic direction from a collection of samples providing individual estimates of this direction. In some instances, however, palaeomagnetic directions have to be inferred from a single sample in which case no α 95 angle can be recovered in this way. Fortunately, the progressive demagnetization techniques and principal component analysis universally used to recover directional information from single samples provide alternative measures of the error affecting the recovered direction, known as Maximum Angular Deviation (MAD) angles. These have so far only been considered as rough quality indicators. Here, however, we show that directions recovered in this way can be assumed to satisfy a Fisher distribution, and that the corresponding MAD angles can be rescaled into α 95 estimates by multiplying it by an appropriate factor, which only depends on the number of demagnetization steps used in the principal component analysis and on whether one relies on a standard or a so-called ‘anchored’ principal component analysis. These coefficients have been tabulated and practical recommendations for taking advantage of them outlined in the final section of the text. They provide simple means for users to produce much needed error bars on declination and inclination time series recovered from sedimentary long sequences.

Beschreibung: The mistakes in recent literatures are analyzed, and a new model for an endoreversible closed modified Brayton cycle with isothermal heat addition coupled to variable-temperature reservoirs is established using finite-time thermodynamics in this paper. The range of isothermal heat addition modification is determined, and the analytical formulae of the dimensionless power output, thermal efficiency and dimensionless power density of the cycle are derived. The effects of the cycle parameters on the global performances of power output and power density and the performances at maximum power design and maximum power density are analyzed by numerical calculations. The results show that there exist optimal compressor pressure ratios, respectively, which lead to maximum dimensionless power output and maximum dimensionless power density, that the optimal compressor pressure ratio and the thermal efficiency at maximum power design are always smaller than the corresponding ones at maximum power density design, and that dimensionless power output and maximum specific volume at maximum power design are always bigger than the corresponding ones at maximum power density design. The results imply that the power density design possesses the advantages such as smaller equipment volume and higher thermal efficiency at the cost of disadvantages such as bigger compressor pressure ratio and power output loss. Maximizing the power density gives a compromise between power and the size of the engine. The calculations also show that an endoreversible closed modified Brayton cycle with isothermal heat addition cannot work at the maximum thermal efficiency design point.

Beschreibung: The downward continuation of the observed geomagnetic field from the Earth's surface to the core–mantle boundary (CMB) is complicated due to induction and diffusion processes in the electrically conducting Earth mantle, which modify the amplitudes and morphology of the geomagnetic field. Various methods have been developed to solve this problem, for example, the perturbation approach by Benton & Whaler, or the non-harmonic downward continuation by Ballani et al. In this paper, we present a new approach for determining the geomagnetic field at the CMB by reformulating the ill-posed, one-sided boundary-value problem with time-variable boundary-value function on the Earth's surface into an optimization problem for the boundary condition at the CMB. The reformulated well-posed problem is solved by a conjugate gradient technique using the adjoint gradient of a misfit. For this purpose, we formulate the geomagnetic adjoint-state equations for efficient computations of the misfit gradient. Beside the theoretical description of the new adjoint-state method (ASM), the first applications to a global geomagnetic field model are presented. The comparison with other methods demonstrates the capability of the new method to determine the geomagnetic field at the CMB and allows us to investigate the variability of the determined field with respect to the applied methods. This shows that it is necessary to apply the ASM when investigating the effect of the Earth's mantle conductivity because the difference between the results of approximate methods (harmonic downward continuation, perturbation approach) and the rigorous ASM are of the same order as the difference between the results of the ASM applied for different mantle conductivities.

Beschreibung: Recent first principles calculations of the Earth's outer core thermal and electrical conductivities have raised their values by a factor of three. This has significant implications for geodynamo operation, in particular, forcing the development of a stably stratified layer at the core–mantle boundary (CMB). This study seeks to test the hypothesis of a stably stratified layer in the uppermost core by analysing geomagnetic observations made by the CHAMP satellite. An inversion method is utilized that jointly solves for the time-dependent main field and the core surface flow, where we assume the temporal variability of the main field, its secular variation (SV), to be entirely due to advective motion within the liquid outer core. The results show that a large-scale pure toroidal flow, consistent with a stably stratified layer atop the outer core, is not compatible with the observed magnetic field during the CHAMP era. However, allowing just a small amount of poloidal flow leads to a model fitting the observations satisfactorily. As this poloidal flow component is large scale, within a predominantly toroidal, essentially tangentially geostrophic flow, it is compatible with a stably stratified upper outer core. Further, our assumption of little or no diffusive SV may not hold, and a small amount of SV generated locally by diffusion might lead to a large-scale pure toroidal flow providing an acceptable fit to the data.

Beschreibung: We present the first inversion of geomagnetic Sq data in a framework of 3-D conductivity models. This problem has been considered as immensely difficult due to the complex spatial structure of the Sq source which, in addition, varies with season and solar activity. Recently, we developed a 3-D electromagnetic (EM) inversion solution that allows one to work in a consistent manner with data that originates from sources, irrespective of their spatial complexity. In this paper, we apply our 3-D EM inversion scheme to Sq data collected during the Australian Wide Array of Geomagnetic Stations project. Within this project, three components of the geomagnetic field were recorded between 1989 November and 1990 December with the use of 53 portable vector magnetometers. The instruments were distributed over the Australian mainland with an average spacing of 275 km between sites. Inverting this unique—in a sense of its spatial regularity, density and long operational time—data set, we recovered the 3-D conductivity distribution beneath Australia at upper mantle depths (100–520 km). This depth range was justified in the paper from resolution studies using checkerboard tests. In addition, we performed extensive modelling to estimate quantitatively the influence of various factors on Sq signals, namely from hypothetical anomalies, inaccuracy in the source, ocean, and model discretization. As expected, the ocean (coastal) effect appeared to be the largest so that it has to be accounted for during 3-D inversion as accurately as possible. Our 3-D inversions—of data from either single or multiple days—revealed a strong offshore conductor near the south-east coast of Australia, which persists at all considered depths. Varying in details, this anomaly is remarkably robust irrespective of the considered day(s). We compared our results to those obtained from a different inversion scheme and an independent induction data set, and observed encouraging similarity. Combination of the two results suggests, that this conductor continues to the base of the mantle transition zone at 660 km. The nature of this anomaly is not fully understood but one possible explanation is that it is attributed to a reservoir responsible for three hotspots in the region.

Beschreibung: A detailed palaeomagnetic, rock-magnetic and palaeointensity study has been carried out on a Miocene volcanic sequence which consists of 39 consecutive lava flows recording a polarity transition in La Gomera (Canary Islands, Spain). In addition, new 40 Ar/ 39 Ar ages were obtained in two flows, yielding 9.63 ± 0.06 Ma in the lower and 9.72 ± 0.08 Ma in the upper part of the sequence. Palaeomagnetic results allowed determining a ChRM direction in all studied lavas: The 25 lowermost flows of the sequence display normal polarity directions and above, a sequence of 14 flows correspond to a transitional geomagnetic regime. If considered together with palaeomagnetic results from a previous study, which were obtained on the flows immediately overlying the upper part of the sequence analysed in this work, these results indicate that the reversal recorded in the Hermigua sequence corresponds to the normal to reverse C4Ar2n to C4Ar3r polarity transition. The lower-lying 25 normal-polarity flows yield a mean direction D  = 359.6°, I  = 42.4° ( α 95  = 5.1°; k  = 33) which agrees well with the expected values. Above, a sequence of 14 flows displays a more irregular directional behaviour, including several transitional directions, suggesting the occurrence of a precursor to the transition. The presence of a virtual geomagnetic pole (VGP) cluster in the western Atlantic Ocean observed in this study coincides with previous records of Miocene transitions. Interestingly, this region corresponds to a near-radial flux centre of the present-day non axial dipole field. Angular dispersion of VGPs calculated for the 25 lowermost normal polarity flows of the sequence shows a lower than expected result. Palaeointensity determinations were carried out using a Thellier type double heating method. 27 of the 48 analysed samples measured yielded successful results. Mean VDMs mean values range from 1.1 ± 0.5 to 8.8 ± 0.9 x 10 22 Am 2 . The intensity values decrease significantly on approaching the directional transitional zone, suggesting an earlier start of the polarity transition in the intensity record, typical of a decreasing axial dipole.

Beschreibung: In this work, we carry out numerical simulations of the seismo-electromagnetic fields associated with a fault in a porous medium by considering the electrokinetic effect. In addition to porous materials, the adopted layered models comprise solid materials in which the electrokinetic effect is inoperative. First, sensitivity study is performed for the evanescent and direct radiation electromagnetic (EM) waves generated by a double couple point source embedded in a porous half-space below a solid half-space. Results suggest that both the evanescent and direct radiation EM waves are sensitive to some medium properties, for example porosity, salinity, fluid viscosity, and conductivity of solid layer. Then, adopting an eight-layer half-space model, we simulate the seismic and EM wavefields generated by the rupture process of a finite fault. It is shown that the electrokinetic effect is able to generate observable corupture EM signals, but the observability depends on some factors such as the epicentral distance, properties of the medium where the fault is located, and local activity levels of EM noise. Time synchronization coseismic EM signals are recorded when the receiver is close to the ground water level but located in a solid medium. In addition to the post-seismic electric field, our results also show the post-seismic magnetic field which has not been identified in previous simulation studies on the electrokinetic effect. The generation of the post-seismic magnetic field probably requires a sufficiently strong medium heterogeneity or fluid-pressure gradient.

Beschreibung: Fault ruptures in the Earth's crust generate both elastic and electromagnetic (EM) waves. If the corresponding EM signals can be observed, then earthquakes could be detected before the first seismic waves arrive. In this study, I consider the piezomagnetic effect as a mechanism that converts elastic waves to EM energy, and I derive analytical formulas for the conversion process. The situation considered in this study is a whole-space model, in which elastic and EM properties are uniform and isotropic. In this situation, the governing equations of the elastic and EM fields, combined with the piezomagnetic constitutive law, can be solved analytically in the time domain by ignoring the displacement current term. Using the derived formulas, numerical examples are investigated, and the corresponding characteristics of the expected magnetic signals are resolved. I show that temporal variations in the magnetic field depend strongly on the electrical conductivity of the medium, meaning that precise detection of signals generated by the piezomagnetic effect is generally difficult. Expected amplitudes of piezomagnetic signals are estimated to be no larger than 0.3 nT for earthquakes with a moment magnitude of ≥7.0 at a source distance of 25 km; however, this conclusion may not extend to the detection of real earthquakes, because piezomagnetic stress sensitivity is currently poorly constrained.

Beschreibung: This paper presents a methodology to sample equivalence domain (ED) in nonlinear partial differential equation (PDE)-constrained inverse problems. For this purpose, we first applied state-of-the-art stochastic optimization algorithm called Covariance Matrix Adaptation Evolution Strategy (CMAES) to identify low-misfit regions of the model space. These regions were then randomly sampled to create an ensemble of equivalent models and quantify uncertainty. CMAES is aimed at exploring model space globally and is robust on very ill-conditioned problems. We show that the number of iterations required to converge grows at a moderate rate with respect to number of unknowns and the algorithm is embarrassingly parallel. We formulated the problem by using the generalized Gaussian distribution. This enabled us to seamlessly use arbitrary norms for residual and regularization terms. We show that various regularization norms facilitate studying different classes of equivalent solutions. We further show how performance of the standard Metropolis–Hastings Markov chain Monte Carlo algorithm can be substantially improved by using information CMAES provides. This methodology was tested by using individual and joint inversions of magneotelluric, controlled-source electromagnetic (EM) and global EM induction data.

Beschreibung: Recent high-resolution aeromagnetic surveys in South Norway have revealed numerous remanent anomalies over Mesoproterozoic metamorphic rocks. Studies on the nature of the minerals that are the remanent carriers has led to discoveries of titanohematite samples with unusual magnetic properties caused by nanoscale exsolution lamellae with their related lamellar magnetism. Here we focus on a rock unit dominated by quartz-plagioclase-biotite granulite containing titanohematite grains with a strong lattice-preferred orientation parallel to regional foliation. When samples with their natural remanent magnetization (NRM), acquired nearly 1 billion years ago, are cooled to 10 K and hysteresis loops measured, these loops show bi-modal exchange bias caused by the magnetism induced within the ilmenite by antiferromagnetic coupling with the adjacent lamellar NRM. By contrast when the samples are cooled in a strong magnetic field (1.5 Tesla), this results in unimodal lamellar magnetism, and, below the T N of ilmenite it adopts a consistent negative orientation, giving rise to unimodal negative exchange bias of 〉500 mT. The results presented here cover the chemical and magnetic properties, Mossbauer results and transmission electron microscopy of the titanohematite and ilmenite lamellae. Initial magnetic experiments indicated the shifts found in the exchange-bias experiments were directly related to the orientation of the sample to the applied field and the initial state of the NRM. In most samples with these unusual magnetic properties, ilmenite lamellae could not be seen in an optical or a scanning electron microscope. However magnetic experiments gave proof of the presence of ilmenite, later confirmed by Mössbauer spectroscopy. Several attempts were made to identify ilmenite in TEM studies, finally successful in showing ilmenite lamellae parallel to (001) of hematite with thicknesses ~1.2 to 1.7 nm and aspect ratios 7–13. Here we compare new TEM images and the magnetic behaviour of these samples to the MOD2 samples that previously showed extraordinary exchange bias properties, and investigate further the nature of these magnetic minerals.

Beschreibung: Rock-magnetic and geochemical characteristics of three Vertisol profiles with different degree of textural differentiation have been studied. Thermomagnetic analyses, thermal demagnetization of laboratory remanences and acquisition of isothermal remanence curves are applied for identification of iron oxide mineralogy. The main magnetic minerals in Vertisols are ferrihydrite, single-domain magnetite, maghemite and hematite. Variations in magnetic susceptibility, anhysteretic remanent magnetization, isothermal remanent magnetization, as well as different ratios (Xarm/X, ARM/SIRM, S-ratio) along depth are studied. Concentration of magnetic minerals in Vertisols is low, influenced by the intense reductomorphic processes. The lowest magnetic susceptibility is found in the most texturally differentiated soil. However, rock-magnetic data suggest the presence of small, but well defined fraction of single domain-like magnetite with relatively wide grain-size distribution found in those parts of the profiles, which are subjected to most intense and frequent seasonal changes in oxidation-reduction conditions. It is suggested that this fraction is formed as a result of transformations of ferrihydrite under repeated cycles of anaerobic/aerobic conditions. Based on geochemical data, CALMAG weathering index was calculated for the three Vertisols. Using the established relation between CALMAG and mean annual precipitation (MAP), palaeo-MAP was evaluated for the studied profiles. The obtained MAP estimations fall in the range 1000–1200 mm and are much higher compared to contemporary precipitation in the area (MAP in the interval 540–770 mm). This finding confirms the relict character of Vertisols on Bulgarian territory and gives more information about the palaeoclimate during the initial stages of Vertisol formation.

Beschreibung: This work presents MARE2DEM, a freely available code for 2-D anisotropic inversion of magnetotelluric (MT) data and frequency-domain controlled-source electromagnetic (CSEM) data from onshore and offshore surveys. MARE2DEM parametrizes the inverse model using a grid of arbitrarily shaped polygons, where unstructured triangular or quadrilateral grids are typically used due to their ease of construction. Unstructured grids provide significantly more geometric flexibility and parameter efficiency than the structured rectangular grids commonly used by most other inversion codes. Transmitter and receiver components located on topographic slopes can be tilted parallel to the boundary so that the simulated electromagnetic fields accurately reproduce the real survey geometry. The forward solution is implemented with a goal-oriented adaptive finite-element method that automatically generates and refines unstructured triangular element grids that conform to the inversion parameter grid, ensuring accurate responses as the model conductivity changes. This dual-grid approach is significantly more efficient than the conventional use of a single grid for both the forward and inverse meshes since the more detailed finite-element meshes required for accurate responses do not increase the memory requirements of the inverse problem. Forward solutions are computed in parallel with a highly efficient scaling by partitioning the data into smaller independent modeling tasks consisting of subsets of the input frequencies, transmitters and receivers. Non-linear inversion is carried out with a new Occam inversion approach that requires fewer forward calls. Dense matrix operations are optimized for memory and parallel scalability using the ScaLAPACK parallel library. Free parameters can be bounded using a new non-linear transformation that leaves the transformed parameters nearly the same as the original parameters within the bounds, thereby reducing non-linear smoothing effects. Data balancing normalization weights for the joint inversion of two or more data sets encourages the inversion to fit each data type equally well. A synthetic joint inversion of marine CSEM and MT data illustrates the algorithm's performance and parallel scaling on up to 480 processing cores. CSEM inversion of data from the Middle America Trench offshore Nicaragua demonstrates a real world application. The source code and MATLAB interface tools are freely available at http://mare2dem.ucsd.edu .

Beschreibung: The spectral complex conductivity of a water-bearing sand during interaction with carbon dioxide (CO 2 ) is influenced by multiple, simultaneous processes. These processes include partial saturation due to the replacement of conductive pore water with CO 2 and chemical interaction of the reactive CO 2 with the bulk fluid and the grain-water interface. We present a laboratory study on the spectral induced polarization of water-bearing sands during exposure to and flow-through by CO 2 . Conductivity spectra were measured successfully at pressures up to 30 MPa and 80 °C during active flow and at steady-state conditions concentrating on the frequency range between 0.0014 and 100 Hz. The frequency range between 0.1 and 100 Hz turned out to be most indicative for potential monitoring applications. The presented data show that the impact of CO 2 on the electrolytic conductivity may be covered by a model for pore-water conductivity, which depends on salinity, pressure and temperature and has been derived from earlier investigations of the pore-water phase. The new data covering the three-phase system CO 2 -brine-sand further show that chemical interaction causes a reduction of surface conductivity by almost 20 per cent, which could be related to the low pH-value in the acidic environment due to CO 2 dissolution and the dissociation of carbonic acid. The quantification of the total CO 2 effect may be used as a correction during monitoring of a sequestration in terms of saturation. We show that this leads to a correct reconstruction of fluid saturation from electrical measurements. In addition, an indicator for changes of the inner surface area, which is related to mineral dissolution or precipitation processes, can be computed from the imaginary part of conductivity. The low frequency range between 0.0014 and 0.1 Hz shows additional characteristics, which deviate from the behaviour at higher frequencies. A Debye decomposition approach is applied to isolate the feature dominating the data at low frequencies. We conclude from our study that electrical conductivity is not only a highly sensitive indicator for CO 2 saturation in pore space. When it is measured in its full spectral and complex form it contains additional information on the chemical state of the system, which holds the potential of getting access to both saturation and interface properties with one monitoring method.

Beschreibung: Our study attempts to identify a characteristic magnetic signature of overbank sediments exhibiting anthropogenically induced magnetic enhancement and thereby to distinguish them from unenhanced sediments with weak magnetic background values, using a novel approach based on data mining methods, thus providing a mean of rapid pollution determination. Data were obtained from 539 bulk samples from vertical profiles through overbank sediment, collected on seven rivers in the eastern Czech Republic and three rivers in northwest England. k -Means clustering and hierarchical clustering methods, paired group (UPGMA) and Ward's method, were used to divide the samples to natural groups according to their attributes. Interparametric ratios: SIRM/; SIRM/ARM; and S –0.1T were chosen as attributes for analyses making the resultant model more widely applicable as magnetic concentration values can differ by two orders. Division into three clusters appeared to be optimal and corresponded to inherent clusters in the data scatter. Clustering managed to separate samples with relatively weak anthropogenically induced enhancement, relatively strong anthropogenically induced enhancement and samples lacking enhancement. To describe the clusters explicitly and thus obtain a discrete magnetic signature, classification rules (JRip method) and decision trees (J4.8 and Simple Cart methods) were used. Samples lacking anthropogenic enhancement typically exhibited an S –0.1T 〈 c. 0.5, SIRM/ARM 〈 c. 150 and SIRM/ 〈 c. 6000 A m –1 . Samples with magnetic enhancement all exhibited an S –0.1T 〉 0.5. Samples with relatively stronger anthropogenic enhancement were unequivocally distinguished from the samples with weaker enhancement by an SIRM/ARM 〉 c. 150. Samples with SIRM/ARM in a range c. 126–150 were classified as relatively strongly enhanced when their SIRM/ 〉 18 000 A m –1 and relatively less enhanced when their SIRM/ 〈 18 000 A m –1 . An additional rule was arbitrary added to exclude samples with fd% 〉 6 per cent from anthropogenically enhanced clusters as samples with natural magnetic enhancement. The characteristics of the clusters resulted mainly from the relationship between SIRM/ARM and the S –0.1T , and SIRM/ and the S –0.1T . Both SIRM/ARM and SIRM/ increase with increasing S –0.1T values reflecting a greater level of anthropogenic magnetic particles. Overall, data mining methods demonstrated good potential for utilization in environmental magnetism.

Beschreibung: The construction of geomagnetic, archaeomagnetic or palaeomagnetic field models requires some prior knowledge about the actual field, which can be gathered from the statistical properties of the field over a variety of length-scales and timescales. However, available geomagnetic data on centennial to millennial periods are too sparse to infer directly these statistical properties. We thus use high-resolution numerical simulations of the geodynamo to test a method for estimating the temporal power spectra (or equivalently the autocovariance functions) of the individual Gauss coefficients that describe the geomagnetic field outside the Earth's fluid outer core. Based on the spectral analysis of our simulations, we argue that a prior for the observational geomagnetic field over decennial to millennial periods can be constructed from the statistics of the field during the short satellite era. The method rests on the assumption that time-series of spherical harmonic coefficients can be considered as realizations of stationary and differentiable stochastic processes, namely order 2 autoregressive (AR2) processes. In the framework of these processes, the statistics of Gauss coefficients are well constrained by their variance and one or two timescales. We find that the time spectra in the dynamo simulations of all Gauss coefficients but the axial dipole are well approximated by the spectra of AR2 processes characterized by only one timescale. The process parameters can simply be deduced from instantaneous estimates of the spatial power spectra of the magnetic field and of its first time derivative. Some deviations of the Gauss coefficients statistics from this minimal model are also discussed. Characterizing the axial dipole clearly requires a more sophisticated AR2 process, with a second distinct timescale.

Beschreibung: The Luonan Basin, located in the transitional zone between temperate and subtropical China, is an important locality for human evolution during the early to middle Pleistocene. The loess deposits in the Luonan Basin contain numerous in situ lithic artefacts; the deposits also constitute suitable material for dating the artefacts and are potentially useful for reconstructing the climatic fluctuations which is important for studying the adaptation and occupation of the area by early humans. We carried out a combined rock magnetic and geochemical investigation of a loess sequence from the Liuwan Palaeolithic site in the Luonan Basin. The results indicate a mixture of magnetic minerals, including magnetite/maghemite and hematite/goethite. Magnetic susceptibility was used as a palaeoclimate proxy on the Chinese Loess Plateau; however, its application to the Luonan Basin may be problematic because the provenance of the loess parent material, as well as the depositional environment, differs from that of the Chinese Loess Plateau. We found that rock magnetic parameters related to the grain size of magnetic minerals, such as SIRM/ and ARM /SIRM, are better palaeoclimatic indicators than magnetic susceptibility. Overall, the magnetic results, together with the results of bulk grain-size and chemical index of alteration, indicate that the interglacial environment of early humans in Luonan Basin was warmer and more humid than the coeval environment of the Chinese Loess Plateau.

Beschreibung: The effects of thermocouples physical size on the performance of a thermoelectric heat pump (TEH) driven by a thermoelectric generator (TEG) device are investigated in this article. The physical size refers to the length and the cross-sectional area of the thermocouples. The performance analysis is multiobjective, including stable electrical current, heating load, coefficient of performance, maximum heating load and maximum heating temperature difference. A characteristic parameter, i.e. area–length ratio, is defined to describe the thermocouples physical size. The influences of the parameter are analyzed by detailed numerical examples. A practical example is proposed to show how to select appropriate thermoelectric modules (TEMs) to construct a high-performance TEG–TEH system satisfying different requirements. The results show that an improvement in its performance is possible by optimizing internal physical size of thermocouples. The conclusion obtained could be used for the selection of TEMs and the design of the TEG–TEH system.

Beschreibung: The purpose of this paper is to present a theoretical analysis of the capillary pumped loop (CPL) performance using different working liquids. CPL is a passive heat transfer device, using no mechanical pump to circulate the working liquid, usually composed of a liquid tank, an evaporator, a condenser, a liquid and a vapor line. Heat load is applied on the external surface of the evaporator, partially transferred to the wick inside. Because of this heat load capillary forces are developed inside the porous structure, due to meniscus formation between liquid and vapor surface of the liquid, causing a pressure oscillation capable to pump the flow out of the evaporator. In this paper CPL performance is evaluated using different working liquids, such as water, ammonia, acetone and freon-134. These have different thermophysical properties such as latent heat, viscosity and density, causing different behavior when used as working liquid. Water was found more stable for higher temperature differences, due to higher latent heat of vaporization, while ammonia could take advantage of its viscosity for small temperature differences.