ALBERT

Description: Seismic waves sensitive to the outermost part of the Earth's liquid core seem to be affected by a stably stratified layer at the core–mantle boundary. Such a layer could have an observable signature in both long-term and short-term variations of the magnetic field of the Earth, which are used to probe the flow at the top of the core. Indeed, with the recent SWARM mission, it seems reasonable to be able to identify waves propagating in the core with period of several months, which may play an important role in the large-scale dynamics. In this paper, we characterize the influence of a stratified layer at the top of the core on deep quasi-geostrophic (Rossby) waves. We compute numerically the quasi-geostrophic eigenmodes of a rapidly rotating spherical shell, with a stably stratified layer near the outer boundary. Two simple models of stratification are taken into account, which are scaled with commonly adopted values of the Brunt–Väisälä frequency in the Earth's core. In the absence of magnetic field, we find that both azimuthal wavelength and frequency of the eigenmodes control their penetration into the stratified layer: the higher the phase speed, the higher the permeability of the stratified layer to the wave motion. We also show that the theory developed by Takehiro & Lister for thermal convection extends to the whole family of Rossby waves in the core. Adding a magnetic field, the penetrative behaviour of the quasi-geostrophic modes (the so-called fast branch) is insensitive to the imposed magnetic field and only weakly sensitive to the precise shape of the stratification. Based on these results, the large-scale and high-frequency modes (1–2 month periods) may be detectable in the geomagnetic data measured at the Earth's surface, especially in the equatorial area where the modes can be trapped.

Description: A 3-D magnetotelluric (MT) inversion code using unstructured tetrahedral elements has been developed in order to correct the topographic effect by directly incorporating it into computational grids. The electromagnetic field and response functions get distorted at the observation sites of MT surveys because of the undulating surface topography, and without correcting this distortion, the subsurface structure can be misinterpreted. Of the two methods proposed to correct the topographic effect, the method incorporating topography explicitly in the inversion is applicable to a wider range of surveys. For forward problems, it has been shown that the finite element method using unstructured tetrahedral elements is useful for the incorporation of topography. Therefore, this paper shows the applicability of unstructured tetrahedral elements in MT inversion using the newly developed code. The inversion code is capable of using the impedance tensor, the vertical magnetic transfer function (VMTF), and the phase tensor as observational data, and it estimates the subsurface resistivity values and the distortion tensor of each observation site. The forward part of the code was verified using two test models, one incorporating topographic effect and one without, and the verifications showed that the results were almost the same as those of previous works. The developed inversion code was then applied to synthetic data from a MT survey, and was verified as being able to recover the resistivity structure as well as other inversion codes. Finally, to confirm its applicability to the data affected by topography, inversion was performed using the synthetic data of the model that included two overlapping mountains. In each of the cases using the impedance tensor, the VMTF and the phase tensor, by including the topography in the mesh, the subsurface resistivity was determined more proficiently than in the case using the flat-surface mesh. Although the locations of the anomalies were not accurately estimated by the inversion using distorted impedance tensors due to the slightly undervalued gain, these locations were correctly estimated by using undistorted impedance tensors or adding VMTFs in the data. Therefore, it can be concluded that the inversion using the unstructured tetrahedral element effectively prevents the misinterpretation of subsurface resistivity and recovers subsurface resistivity proficiently by representing the topography in the computational mesh.

Description: Separating the contribution of different hematite coercivity grains to the magnetic fabric is a standing problem in rock magnetism because of the common occurrence of thermochemical alterations when measuring the anisotropy of thermal remanence. A technique that eliminates this bias is presented, which is useful when there is a need to separate the fabric of detrital from pigmentary hematite, for example. The method is based on stepwise thermal demagnetization of saturation isothermal remanent magnetizations (IRMs) applied orthogonally on three sister specimens, allowing calculation of the anisotropy tensor from the three components of each demagnetized IRM vector, avoiding the necessity of having to apply IRMs to thermochemically altered specimens. Vector subtraction allows determining the anisotropy tensor for specific unblocking-temperature ranges. The anisotropies of the pigmentary, specular and total hematite of the Mauch Chunk Formation red beds of Pennsylvania have been measured from an oriented block sample and results are compared to previous anisotropy measurements performed using the high-field anisotropy of isothermal remanence technique (hf-AIR), which measures total undifferentiated hematite. Experiments were conducted using non-saturating 1 T and fully saturating 5.5 T fields: both experimental sets seem capable of measuring the orientation of the specularite anisotropy principal axes, but 5.5 T are needed to capture the orientation of the higher coercivity pigmentary grains. The magnitudes of the principal axes, instead, are only faithfully measured using 5.5 T fields and yield somewhat higher anisotropies than those measured by hf-AIR. The fundamental requirement for this technique is homogeneous material among the three sister specimens, which is a significant limitation; homogeneity tests allow assessment of applicability of the method and reliability of the results.

Description: Archaeomagnetic field models cover longer timescales than historical models and may therefore resolve the motion of geomagnetic features on the core–mantle boundary (CMB) in a more meaningful statistical sense. Here we perform a detailed appraisal of archaeomagnetic field models to infer some aspects of the physics of the outer core. We characterize and compare the identification and tracking of reversed flux patches (RFPs) in order to assess the RFPs robustness. We find similar behaviour within a family of models but differences among different families, suggesting that modelling strategy is more influential than data set. Similarities involve recurrent positions of RFPs, but no preferred direction of motion is found. The tracking of normal flux patches shows similar qualitative behaviour confirming that RFPs identification and tracking is not strongly biased by their relative weakness. We also compare the tracking of RFPs with that of the historical field model gufm1 and with seismic anomalies of the lowermost mantle to explore the possibility that RFPs have preferred locations prescribed by lower mantle lateral heterogeneity. The archaeomagnetic field model that most resembles the historical field is interpreted in terms of core dynamics and core–mantle thermal interactions. This model exhibits correlation between RFPs and low seismic shear velocity in co-latitude and a shift in longitude. These results shed light on core processes, in particular we infer toroidal field lines with azimuthal orientation below the CMB and large fluid upwelling structures with a width of about 80° (Africa) and 110° (Pacific) at the top of the core. Finally, similar preferred locations of RFPs in the past 9 and 3 kyr of the same archaeomagnetic field model suggest that a 3 kyr period is sufficiently long to reliably detect mantle control on core dynamics. This allows estimating an upper bound of 220–310 km for the magnetic boundary layer thickness below the CMB.

Description: Post-depositional reductive diagenesis usually results in partial or entire cleansing of the pristine palaeomagnetic signal, therefore, its intensity is important to be assessed for sediments that are in the purpose of retrieving palaeomagnetic information. Grain size, rock magnetic and geochemical studies on the entire core, along with scanning electron microscope observations and X-ray diffraction analyses for representative samples were carried out on a Holocene sediment core retrieved from the deep water part of Huguangyan maar lake (HGY), southeast China. The pristine magnetic mineral assemblage of the studied core is domianted by superparamagnetic (SP) and stable single domain titanomagnetite, and high coercivity minerals are not detectable. Based on down-core variations of the average grain size ( M Z ), total organic carbon (TOC), detrital elements (Al, Ti, Fe and Mn) and the concentration and mineralogy of magnetic minerals, the studied core could be divided into three subsections. The uppermost subsection is the least affected by diagenesis, with detrital titanomagnetite as the dominant magnetic mineral. This is owing to low TOC contents, but high detrital input generated by weak Asian summer monsoon intensity during the late Holocene. The intermediate subsection shows down-core progressively enhanced dissolution of detrital titanomagnetite, and concomitant formation of authigenic pyrite and siderite, which indicates down-core progressively enhanced diagenesis generated by down-core progressive increasing TOC content, but decreasing detrital input as the result of down-core progressively strengthened Asian summer monsoon intensity. The pristine magnetic mineral assemblage has been profoundly modified in the lowermost subsection. At certain positions of the lowermost subsection, detrital titanomagnetite has been even completely dissolved via diagenesis, giving place to authigenic pyrite and siderite. High TOC content, but low detrital input generated from strong Asian summer monsoon intensity during the early Holocene are accountable for intensive diagenesis in the lowermost subsection. Complete erasing of detrital magnetic input signal at certain positions of the lowermost subsection, and considerable formation of authigenic siderite indicate that palaeomagnetic records of the studied core have been significantly compromised. The studied core has relatively higher TOC content, lower detrital matter content, calmer sedimentary environments, and less DO available at its water–sediment interface than the cores retrieved at relatively shallower water depths, which all contribute to its relatively stronger diagenesis. Progressive thickening of the upper two subsections with increasing water depth is owing to progressive increase in sedimentation rate with increasing water depth, which is the key factor in determining the thickness of each diagenetic subsection of cores from HGY. It would be better that lake sediments for palaeomagnetic investigations collected at a water depth shallower than the depth of its thermocline.

Description: The rocks in the crust and the upper mantle of the Earth are believed to exhibit electrical anisotropy to some extent. It is beneficial to further understand and recognize the propagation of the electromagnetic waves in the Earth by investigating the magnetotelluric (which is one of the main geophysical techniques to probe the deep structures in the Earth) responses of the media with anisotropic conductivity structures. In this study, we examine the magnetotelluric fields over an idealized 2-D model consisting of two segments with axially anisotropic conductivity structures overlying a perfect conductor basement by a quasi-static analytic approach. The resulting analytic solution could not only contribute to the electromagnetic induction theory in the anisotropic Earth but also serve as at least an initial standard solution which could be used to validate the reliability and accuracy of the numerical algorithms developed for modelling the magnetotelluric responses of the 2-D media with much more general anisotropic conductivity.

Description: Several works have reported that haematite has non-linear initial susceptibility at room temperature, like pyrrhotite or titanomagnetite, but there is no explanation for the observed behaviours yet. This study sets out to determine which physical property (grain size, foreign cations content and domain walls displacements) controls the initial susceptibility. The performed measurements include microprobe analysis to determine magnetic phases different to haematite; initial susceptibility (300 K); hysteresis loops, SIRM and backfield curves at 77 and 300 K to calculate magnetic parameters and minor loops at 77 K, to analyse initial susceptibility and magnetization behaviours below Morin transition. The magnetic moment study at low temperature is completed with measurements of zero field cooled–field cooled and AC susceptibility in a range from 5 to 300 K. The minor loops show that the non-linearity of initial susceptibility is closely related to Barkhausen jumps. Because of initial magnetic susceptibility is controlled by domain structure it is difficult to establish a mathematical model to separate magnetic subfabrics in haematite-bearing rocks.

Description: A series of important geological events occurred in the Tibetan Plateau area during the Jurassic, such as the collision of the Lhasa and Qiangtang Terranes, the closure of the Meso-Tethyan Ocean, the opening of the Neo-Tethyan Ocean and the cessation of the mega-monsoon. The ~3000 m thick Jurassic sedimentary sequence in the Qiangtang Basin on the central Tibetan Plateau, which is called the Yanshiping (YSP) Group, recorded these geological events. However, the chronology of the sequence is surprisingly poorly constrained. Here, we perform a detailed palaeomagnetic analysis on the ~1060 m thick middle and upper portions of the YSP Group (the Xiali and Suowa Formations) in the YSP section of the eastern Qiangtang Basin. Three bivalve zones at stratigraphic intervals of ~40–140, 640–800 and 940–1040 m are identified, which yield a Bathonian–Callovian age for the Lower Xiali Fm., a Callovian–Oxfordian age for the Lower Suowa Fm. and an Oxfordian–Kimmeridgian age for the Upper Suowa Fm. A total of 544 oriented palaeomagnetic samples were collected from the section. By combining thermal and alternating field demagnetizations, clear characteristic remanent magnetization (ChRM) directions are isolated for most of the samples. The robust ChRM directions pass fold and reversals tests, which support the primary nature of the ChRMs and yield a palaeopole at 76.8°N/297.2°E (dp = 2.2°, dm = 3.7°). A total of 27 normal and 26 reversed polarity zones were successfully recorded in the section. Combined with fossil age constraints, results suggest that the section is plausibly composed of a Callovian-Early Kimmeridgian age sedimentary sequence.

Description: This study investigates pressure effects on the magnetic properties of non-interacting single-domain (SD) magnetite. Using a high-pressure cell specially designed for a Magnetic Property Measurement System, magnetic hysteresis measurements were conducted under high pressures of up to 1 GPa on natural plagioclase crystals containing much acicular SD magnetite. Coercivity and saturation magnetization were nearly constant with pressure, while saturation remanent magnetization and coercivity of remanence decreased with pressure at moderate rates of –8 per cent GPa –1 and –18 per cent GPa –1 , respectively. These results suggest that temperature effects govern the magnetic behaviour of acicular SD magnetite grains in the middle and lower crusts.

Description: Characterization of geomagnetic field behaviour on timescales of centuries to millennia is necessary to understand the mechanisms that sustain the geodynamo and drive its evolution. As Holocene paleomagnetic and archeomagnetic data have become more abundant, strategies for regularized inversion of modern field data have been adapted to produce numerous time-varying global field models. We evaluate the effectiveness of several approaches to inversion and data handling, by assessing both global and regional properties of the resulting models. Global Holocene field models cannot resolve Southern hemisphere regional field variations without the use of sediments. A standard data set is used to construct multiple models using two different strategies for relative paleointensity calibration and declination orientation and a selection of starting models in the inversion procedure. When data uncertainties are considered, the results are similar overall regardless of whether we use iterative calibration and reorientation, or co-estimation of the calibration and orientation parameters as part of the inversion procedure. In each case the quality of the starting model used for initial relative paleointensity calibration and declination orientation is crucial and must be based on the best absolute information available. Without adequate initial calibration the morphology of dipole moment variations can be recovered but its absolute value will be correlated with the initial intensity calibrations, an effect that might be mitigated by ensuring an appropriate fit to enough high quality absolute intensity data with low uncertainties. The declination reorientation mainly impacts regional field structure and in the presence of non-zonal fields will result in a non-zero local average. The importance of declination orientation is highlighted by inconsistencies in the West Pacific and Australian sediment records in CALS10k.1b model. Great care must also be taken to assess uncertainties associated with both paleomagnetic and age data and to evaluate the effects of poor data distribution. New consistently allocated uncertainty estimates for sediment paleomagnetic records highlight the importance of adequate uncertainties in the inversion process, as they determine the relative weighting among the data and overall normalized misfit levels which in turn influence the complexity of the inferred field models. Residual distributions suggest that the most appropriate misfit measure is the L 1 norm (minimum absolute deviation) rather than L 2 (least squares), but this seems to have relatively minor impact on the overall results. For future Holocene field modelling we see a need for comprehensive methods to assess uncertainty in individual archeomagnetic data so that these data or models derived from them can be used for reliable initial relative paleointensity calibration and declination orientation in sediments. More work will be needed to assess whether co-estimation or an iterative approach to inversion is more efficient overall. This would be facilitated by realistic and globally consistent data and age uncertainties from the paleomagnetic community.