ALBERT

Description: In this study, we present a new synthesis of GPS velocities for tectonic deformation within the Tibetan Plateau and its surrounding areas, a combined data set of ~1854 GPS-derived horizontal velocity vectors. Assuming that crustal deformation is localized along major faults, a block modelling approach is employed to interpret the GPS velocity field. We construct a 30-element block model to describe present-day deformation in western China, with half of them located within the Tibetan Plateau, and the remainder located in its surrounding areas. We model the GPS velocities simultaneously for the effects of block rotations and elastic strain induced by the bounding faults. Our model yields a good fit to the GPS data with a mean residual of 1.08 mm a –1 compared to the mean uncertainty of 1.36 mm a –1 for each velocity component, indicating a good agreement between the predicted and observed velocities. The major strike-slip faults such as the Altyn Tagh, Xianshuihe, Kunlun and Haiyuan faults have relatively uniform slip rates in a range of 5–12 mm a –1 along most of their segments, and the estimated fault slip rates agree well with previous geologic and geodetic results. Blocks having significant residuals are located at the southern and southeastern Tibetan Plateau, suggesting complex tectonic settings and further refinement of accurate definition of block geometry in these regions.

Description: Animal-associated microbiotas form complex communities, which play crucial functions for their host, including susceptibility to infections. Despite increasing attention to bats as reservoirs of zoonotic pathogens, their microbiota is poorly documented, especially for samples potentially implicated in pathogen transmission such as urine and saliva. Here, using low-biomass individual samples, we examined the composition and structure of bacterial communities excreted by insectivorous bats, focusing on three body habitats (saliva, urine and faeces). We show that niche specialisation occurs as bacterial community composition was distinct across body habitats with the majority of phylotypes being body habitat specific. Our results suggest that urine harbours more diverse bacterial communities than saliva and faeces and reveal potentially zoonotic bacteria such as Leptospira , Rickettsia , Bartonella and Coxiella in all body habitats. Our study emphasised that, in addition to the traditional use of gut-associated samples such as faeces, both urine and saliva are also of interest because of their diverse microbiota and the potential transmission of pathogenic bacteria. Our results represent a critical baseline for future studies investigating the interactions between microbiota and infection dynamics in bats.

Description: Using an up-to-date global plate rotation model, applied to the endpoints of preserved major spreading ridge isochrons, we have calculated the explicitly reconstructable length-weighted mean global half-spreading rate (HSR), ridge length and area production as a function of time since the end of the Cretaceous Normal Superchron at 83.0 Ma. Our calculations integrate uncertainties in rotation parameters and chron boundary ages with the partial sampling uncertainties arising from progressive subduction of older oceanic lithosphere and its preserved spreading record. This record of directly reconstructable oceanic ridge production provides a well-constrained baseline that can be compared to reconstructions that include the largely unconstrained extrapolated histories of entirely subducted oceanic plates. The directly reconstructable global mean HSR has not varied by more than ±15 per cent about an average rate of 28.4 ± 4.6 mm a –1 since 83 Ma. No long-term secular trend is evident: a maximum global mean half-rate of 32 ± 6 mm a –1 occurred from 33.1 Ma to about 25.8 Ma, with minima of 26 ± 5 mm a –1 between about 56 and 40.2 Ma, and 24 ± 1 mm a –1 since 3.2 Ma. Only this most recent interval has a rate that differs significantly (at ±2) from the long-term mean. The global, reconstructable ridge length at 56 Ma decreases by less than 15 per cent relative to the modern ridge system; by 83 Ma it has decreased by 38 per cent. These relatively high preserved ridge fractions mean that the estimated uncertainty due to partial sampling stays roughly equivalent to the estimated rotation model uncertainties, allowing long-term spreading rate variations of 〉20 per cent since the Late Cretaceous to be ruled out. In contrast, prior to 83 Ma too little oceanic lithosphere is preserved to reliably reconstruct global spreading rates.

Description: R-type bacteriocins are contractile phage tail-like structures that are bactericidal towards related bacterial species. The C-terminal region of the phage tail fiber protein determines target-binding specificity. The mutualistic bacteria Xenorhabdus nematophila and X. bovienii produce R-type bacteriocins (xenorhabdicins) that are selectively active against different Xenorhabdus species. We analyzed the P2-type remnant prophage clusters in draft sequences of nine strains of X. bovienii . The C-terminal tail fiber region in each of the respective strains was unique and consisted of mosaics of modular units. The region between the main tail fiber gene ( xbpH1 ) and the sheath gene ( xbpS1 ) contained a variable number of modules encoding tail fiber fragments. DNA inversion and module exchange between strains was involved in generating tail fiber diversity. Xenorhabdicin-enriched fractions from three different X. bovienii strains isolated from the same nematode species displayed distinct activities against each other. In one set of strains, the strain that produced highly active xenorhabdicin was able to eliminate a sensitive strain. In contrast, xenorhabdicin activity was not a determining factor in the competitive fitness of a second set of strains. These findings suggest that related strains of X. bovienii use xenorhabdicin and additional antagonistic molecules to compete against each other.

Description: Anabaena PCC7120 has two annotated toxin–antitoxin systems: MazEF and HicAB. Overexpression of either of the toxins severely inhibited the growth of Escherichia coli BL21(p lysS )(DE3). Of the two Anabaena toxins, MazF exhibited higher toxicity than HicA as evidenced by (i) 100-fold lower viability upon overexpression of MazF compared to HicA; (ii) complete loss of cell viability within 1 h of induction of MazF expression, as against 〉10 3 colony forming units mL –1 in case of HicA; (iii) inability to maintain the MazF overexpressing plasmid in E. coli cells; and (iv) neutralisation of the toxin was effective at the molar ratio of 1:1.9 for MazF:MazE and 13:1 for HicA:HicB, indicating higher antitoxin requirement for neutralisation of MazF. The growth inhibitory effect of MazF was found to be higher in lag phase cultures compared to mid-logarithmic phase cultures of E. coli , while the reverse was true for HicA. The results suggest possible distinct roles for MazEF and HicAB systems of Anabaena .

Description: We explore thermal convection of a fluid with a temperature-dependent viscosity in a basally heated 3-D spherical shell using linear stability analyses and numerical experiments, while considering the application of our results to terrestrial planets. The inner to outer radius ratio of the shell f assumed in the linear stability analyses is in the range of 0.11–0.88. The critical Rayleigh number R c for the onset of thermal convection decreases by two orders of magnitude as f increases from 0.11 to 0.88, when the viscosity depends sensitively on the temperature, as is the case for real mantle materials. Numerical simulations carried out in the range of f  = 0.11–0.55 show that a thermal boundary layer (TBL) develops both along the surface and bottom boundaries to induce cold and hot plumes, respectively, when f is 0.33 or larger. However, for smaller f values, a TBL develops only on the bottom boundary. Convection occurs in the stagnant-lid regime where the root mean square velocity on the surface boundary is less than 1 per cent of its maximum at depth, when the ratio of the viscosity at the surface boundary to that at the bottom boundary exceeds a threshold that depends on f . The threshold decreases from 10 6.5 at f  = 0.11 to 10 4 at f  = 0.55. If the viscosity at the base of the convecting mantle is 10 20 –10 21  Pa s, the Rayleigh number exceeds R c for Mars, Venus and the Earth, but does not for the Moon and Mercury; convection is unlikely to occur in the latter planets unless the mantle viscosity is much lower than 10 20  Pa s and/or the mantle contains a strong internal heat source.

Description: Subducting oceanic lithosphere is an example of a thin sheet-like object whose characteristic lateral dimension greatly exceeds its thickness. Here we exploit this property to derive a new hybrid boundary-integral/thin sheet (BITS) representation of subduction that combines in a single equation all the forces acting on the sheet: gravity, internal resistance to bending and stretching, and the tractions exerted by the ambient mantle. For simplicity, we limit ourselves to 2-D. We solve the BITS equations using a discrete Lagrangian approach in which the sheet is represented by a set of vertices connected by edges. Instantaneous solutions for the sinking speed of a slab attached to a trailing flat sheet obey a scaling law of the form V / V Stokes  = fct(St), where V Stokes is a characteristic Stokes sinking speed and St is the sheet's flexural stiffness. Time-dependent solutions for the evolution of the sheet's shape and thickness show that these are controlled by the viscosity ratio between the sheet and its surroundings. An important advantage of the BITS approach is the possibility of generalizing the sheet's rheology, either to a viscosity that varies along the sheet or to a non-Newtonian shear-thinning rheology.

Description: The aftershock distribution of the 1933 Sanriku-oki outer trench earthquake is estimated by using modern relocation methods and a newly developed velocity structure to examine the spatial extent of the source-fault and the possibility of a triggered interplate seismicity. In this study, we first examined the regional data quality of the 1933 earthquake based on smoked-paper records and then relocated the earthquakes by using the 3-D velocity structure and double-difference method. The improvements of hypocentre locations using these methods were confirmed by the examination of recent earthquakes that are accurately located based on ocean bottom seismometer data. The results show that the 1933 aftershocks occurred under both the outer- and inner-trench-slope regions. In the outer-trench-slope region, aftershocks are distributed in a ~280-km-long area and their depths are shallower than 50 km. Although we could not constrain the fault geometry from the hypocentre distribution, the depth distribution suggests the whole lithosphere is probably not under deviatoric tension at the time of the 1933 earthquake. The occurrence of aftershocks under the inner trench slope was also confirmed by an investigation of waveform frequency difference between outer and inner trench earthquakes as recorded at Mizusawa. The earthquakes under the inner trench slope were shallow (depth less double equals30 km) and the waveforms show a low-frequency character similar to the waveforms of recent, precisely located earthquakes in the same area. They are also located where recent activity of interplate thrust earthquakes is high. These suggest that the 1933 outer-trench-slope main shock triggered interplate earthquakes, which is an unusual case in the order of occurrence in contrast with the more common pairing of a large initial interplate shock with subsequent outer-slope earthquakes. The off-trench earthquakes are distributed about 80 km width in the trench perpendicular direction. This wide width cannot be explained from a single high-angle fault confined at a shallow depth (depth less double equals50 km). The upward motion of the 1933 tsunami waveform records observed at Sanriku coast also cannot be explained from a single high-angle west-dipping normal fault. If we consider additional fault, involvement of high-angle, east-dipping normal faults can better explain the tsunami first motion and triggering of the aftershock in a wide area under the outer trench slope. Therefore multiple off-trench normal faults may have activated during the 1933 earthquake. We also relocated recent (2001–2012) seismicity by the same method. The results show that the present seismicity in the outer-trench-slope region can be divided into several groups along the trench. Comparison of the 1933 rupture dimensions based on our aftershock relocations with the morphologies of fault scarps in the outer trench slope suggest that the rupture was limited to the region where fault scarps are largely trench parallel and cross cut the seafloor spreading fabric. These findings imply that bending geometry and structural segmentation of the incoming plate largely controls the spatial extent of the 1933 seismogenic faulting. In this shallow rupture model for this largest outer trench earthquake, triggered seismicity in the forearc and structural control of faulting represent an important deformation styles for off-trench and shallow megathrust zones.

Description: Four antibiotics (pamamycin, oligomycin A, oligomycin B and echinosporin) were isolated and characterized from the fermentation broth of the marine Streptomyces strains B8496 and B8739. Bioassays revealed that each of these compounds impaired motility and caused subsequent lysis of P. viticola zoospores in a dose- and time-dependent manner. Pamamycin displayed the strongest motility inhibitory and lytic activities (IC 50 0.1 μg mL –1 ) followed by oligomycin B (IC 50 0.15 and 0.2 μg mL –1 ) and oligomycin F (IC 50 0.3 and 0.5 μg mL –1 ). Oligomycin A and echinosporin also showed motility inhibitory activities against the zoospores with IC 50 values of 3.0 and 10.0 μg mL –1 , respectively. This is the first report of motility inhibitory and lytic activities of these antibiotics against zoospores of a phytopathogenic peronosporomycete. Structures of all the isolated compounds were determined based on detailed spectroscopic analysis.

Description: In sulfidic environments, microbes oxidize reduced sulfur compounds via several pathways. We used metagenomics to investigate sulfur metabolic pathways from microbial mat communities in two subterranean sulfidic streams in Lower Kane Cave, WY, USA and from Glenwood Hot Springs, CO, USA. Both unassembled and targeted recA gene assembly analyses revealed that these streams were dominated by Epsilonproteobacteria and Gammaproteobacteria , including groups related to Sulfurovum , Sulfurospirillum , Thiothrix and an epsilonproteobacterial group with no close cultured relatives. Genes encoding sulfide:quinone oxidoreductase (SQR) were abundant at all sites, but the specific SQR type and the taxonomic affiliation of each type differed between sites. The abundance of thiosulfate oxidation pathway genes (Sox) was not consistent between sites, although overall they were less abundant than SQR genes. Furthermore, the Sox pathway appeared to be incomplete in all samples. This work reveals both variations in sulfur metabolism within and between taxonomic groups found in these systems, and the presence of novel epsilonproteobacterial groups.

Description: Pseudomonas aeruginosa is an opportunistic pathogen with high resistance to a wide variety of antimicrobials. The multidrug resistance pump MexAB-OprM promotes the efflux of various antibiotics, mostly when mutations accumulate in the transcriptional regulators MexR, NalC and NalD, thereby causing MexAB-OprM overexpression. In this work, a characterization of 50 P. aeruginosa isolates obtained from Brazilian agricultural soils to determine the reasons of their resistance to aztreonam was done. The majority of the isolates showed higher aztreonam resistance than wild-type strain by MIC method. DNA sequence analysis of mexR , nalC and nalD genes from 13 of these isolates showed the amino acid substitution in NalC for all tested isolates, just one mutation was detected in MexR and none in NalD. Furthermore, an increase in the level of mexA expression by real-time RT-PCR analysis in eight isolates harboring mutations in NalC was found. Although there was not a relationship between MIC of aztreonam and the level of mexA expression, on the other hand, the results presented here suggest that novel mutations in NalC, including Arg 97 -Gly and Ala 186 -Thr, are related to MexAB-OprM overexpression causing aztreonam resistance in P. aeruginosa environmental isolates.

Description: Sedge-dominated wetlands on the Qinghai–Tibetan Plateau are methane emission centers. Methanotrophs at these sites play a role in reducing methane emissions, but relatively little is known about the composition of active methanotrophs in these wetlands. Here, we used DNA stable isotope probing to identify the key active aerobic methanotrophs in three sedge-dominated wetlands on the plateau. We found that Methylocystis species were active in two peatlands, Hongyuan and Dangxiong. Methylobacter species were found to be active only in Dangxiong peat. Hongyuan peat had the highest methane oxidation rate, and cross-feeding of carbon from methanotrophs to methylotrophic Hyphomicrobium species was observed. Owing to a low methane oxidation rate during the incubation, the labeling of methanotrophs in Maduo wetland samples was not detected. Our results indicate that there are large differences in the activity of methanotrophs in the wetlands of this region.

Description: Here we present the generation and function of two sets of bacterial plasmids that harbor fluorescent genes encoding either blue, cyan, yellow or red fluorescent proteins. In the first set, protein expression is controlled by the strong and constitutive nptII promoter whereas in the second set, the strong tac promoter was chosen that underlies LacI q regulation. Furthermore, the plasmids are mobilizable, contain Tn 7 transposons and a temperature-sensitive origin of replication. Using Escherichia coli S17-1 as donor strain, the plasmids allow fast and convenient Tn 7 -transposon delivery into many enterobacterial hosts, such as the here-used E. coli O157:H7. This procedure omits the need of preparing competent recipient cells and antibiotic resistances are only transiently conferred to the recipients. As the fluorescence proteins show little to no overlap in fluorescence emission, the constructs are well suited for the study of multicolored synthetic bacterial communities during biofilm production or in host colonization studies, e.g. of plant surfaces. Furthermore, tac promoter-reporter constructs allow the generation of so-called reproductive success reporters, which allow to estimate past doublings of bacterial individuals after introduction into environments, emphasizing the role of individual cells during colonization.

Description: Geodetic, geologic and palaeomagnetic data reveal that Oregon (western USA) rotates clockwise at 0.3 to 1.0° Ma –1 (relative to North America) about an axis near the Idaho–Oregon–Washington border, while northeast Washington is relatively fixed. This rotation has been going on for at least 15 Ma. The Yakima fold and thrust belt (YFTB) forms the boundary between northern Oregon and central Washington where convergence of the clockwise-rotating Oregon block is apparently accommodated. North–south shortening across the YFTB has been thought to occur in a fan-like manner, increasing in rate to the west. We obtained high-accuracy, high-density geodetic GPS measurements in 2012–2014 that are used with earlier GPS measurements from the 1990s to characterize YFTB kinematics. The new results show that the deformation associated with the YFTB starts at the Blue Mountains Anticline in northern Oregon and extends north beyond the Frenchman Hills in Washington, past the epicentre of the 1872 M w 7.0 Entiat earthquake to 49°N. The north–south strain rate across the region is 2 to 3 x 10 –9 yr –1 between the volcanic arc and the eastern edge of the YFTB (241.0°E); east of there it drops to about 10 –9 yr –1 . At the eastern boundary of the YFTB, faults and earthquake activity are truncated by a north-trending, narrow zone of deformation that runs along the Pasco Basin and Moses Lake regions near 240.9°E. This zone, abutting the Department of Energy Hanford Nuclear Reservation, accommodates about 0.5 mm yr –1 of east to northeast shortening. A similar zone of N-trending transpression is seen along 239.9°E where there is a change in the strike of the Yakima folds. The modern deformation of the YFTB is about 600 km wide from south to north and internally may be controlled by pre-existing crustal structure.

Description: The Central Anatolian orogenic plateau is represented by young volcanism, rapid plateau uplift and distinctive (past and active) tectonic deformation. In this study, we consider observational data in terms of regional present-day geodynamics in the region. The residual topography of Central Anatolia was derived to define the regional isostatic conditions according to Airy isostasy and infer the potential role of ‘dynamic topography’. 2-D thermomechanical forward models for coupled mantle-lithosphere flow/deformation were conducted along an N–S directional profile through the region (e.g. northern/Pontides, interior and southern/Taurides). These models were based on seismic tomography data that provide estimates about the present-day mantle thermal structure beneath the Anatolian plate. We compare the modelling results with calculated residual topography and independent data sets of geological deformation, gravity and high surface heat flow/widespread geothermal activity. Model results suggest that there is ~1 km of mantle flow induced dynamic topography associated with the sublithospheric flow driven by the seismically inferred mantle structure. The uprising mantle may have also driven the asthenospheric source of volcanism in the north (e.g. Galatia volcanic province) and the Cappadocia volcanic province in the south while elevating the surface in the last 10 Myr. Our dynamic topography calculations emphasize the role of vertical forcing under other orogenic plateaux underlain by relatively thin crust and low-density asthenospheric mantle.

Description: In many geological systems, inversion of density stratification sets in Rayleigh–Taylor (RT) instabilities, leading to an ascent of relatively low-density materials through the high-density overburden in the form of diapirs. These diapirs often originate from dipping low-density layers. This study aims to show how the initial tilt of such source layers can control the ascent behaviour of diapirs initiated by RT instabilities. Using two-layer viscous models we produced RT instabilities in physical experiments, and investigated the effects of source-layer tilts ( β ). Our experiments suggest that these diapirs ascend with contrasting lateral spreading rates in the up and down slope directions, resulting in their axi-asymmetric geometry. However, their heads retain a circular outline on the horizontal top surface, where the upwelling axis is located away from their geometric centre in the upslope direction. In this paper, we present a series of experimental models to demonstrate the spectrum of axi-symmetric to -asymmetric geometrical transitions with increasing β . Our experiments also reveal that when β is large (〉4°) the diapirs become unstable, resulting in a continuous migration of their stems in the upslope direction. Using the volume of fluid method we ran computational fluid dynamic (CFD) simulations to study the underlying hydrodynamics of axi-asymmetric diapiric growth. The CFD simulations show that β 〉 0° conditions develop stronger flow vortices on the downslope side of an ascending diapir, leading to a pressure difference between the up- and downslope flanks. Such a differential pressure causes the diapir head to spread at a faster rate in the tilt direction. An estimate of the asymmetric spreading rates is given as a function of β . Our present study provides a fundamental understanding of the hydrodynamic flow structure responsible for the asymmetric growth of RT instabilities on tilted source layers, as applicable to a wide range of large-scale geological settings, such as sedimentary basins and subduction zones.

Description: The geomechanical analysis of a highly compartmentalized reservoir is performed to simulate the seafloor subsidence due to gas production. The available observations over the hydrocarbon reservoir consist of bathymetric surveys carried out before and at the end of a 10-yr production life. The main goal is the calibration of the reservoir compressibility c M , that is, the main geomechanical parameter controlling the surface response. Two conceptual models are considered: in one (i) c M varies only with the depth and the vertical effective stress (heterogeneity due to lithostratigraphic variability); in another (ii) c M varies also in the horizontal plane, that is, it is spatially distributed within the reservoir stratigraphic units. The latter hypothesis accounts for a possible partitioning of the reservoir due to the presence of sealing faults and thrusts that suggests the idea of a block heterogeneous system with the number of reservoir blocks equal to the number of uncertain parameters. The method applied here relies on an ensemble-based data assimilation (DA) algorithm (i.e. the ensemble smoother, ES), which incorporates the information from the bathymetric measurements into the geomechanical model response to infer and reduce the uncertainty of the parameter c M . The outcome from conceptual model (i) indicates that DA is effective in reducing the c M uncertainty. However, the maximum settlement still remains underestimated, while the areal extent of the subsidence bowl is overestimated. We demonstrate that the selection of the heterogeneous conceptual model (ii) allows to reproduce much better the observations thus removing a clear bias of the model structure. DA allows significantly reducing the c M uncertainty in the five blocks (out of the seven) characterized by large volume and large pressure decline. Conversely, the assimilation of land displacements only partially constrains the prior c M uncertainty in the reservoir blocks marginally contributing to the cumulative seafloor subsidence, that is, blocks with low pressure.

Description: This work aims to explore the ongoing tectonic activity of structures in the outermost sector of the Northern Apennines, which represents the active leading edge of the thrust belt and is dominated by compressive deformation. We have applied the Persistent Scatterer Interferometry (PSI) technique to obtain new insights into the present-day deformation pattern of the frontal area of the Northern Apennine. PSI has proved to be effective in detecting surface deformation of wide regions involved in low tectonic movements. We used 34 Envisat images in descending geometry over the period of time between 2004 and 2010, performing about 300 interferometric pairs. The analysis of the velocity maps and of the PSI time-series has allowed to observe ground deformation over the sector of the Po Plain between Piacenza and Reggio Emilia. The time-series of permanent GPS stations located in the study area, validated the results of the PSI technique, showing a good correlation with the PS time-series. The PS analysis reveals the occurrence of a well-known subsidence area on the rear of the Ferrara arc, mostly connected to the exploitation of water resources. In some instances, the PS velocity pattern reveals ground uplift (with mean velocities ranging from 1 to 2.8 mm yr –1 ) above active thrust-related anticlines of the Emilia and Ferrara folds, and part of the Pede-Apennine margin. We hypothesize a correlation between the observed uplift deformation pattern and the growth of the thrust-related anticlines. As the uplift pattern corresponds to known geological features, it can be used to constrain the seismo-tectonic setting, and a working hypothesis may involve that the active Emilia and Ferrara thrust folds would be characterized by interseismic periods possibly dominated by aseismic creep.

Description: Spa -typing and microarray techniques were used to study epidemiological changes in methicillin-resistant Staphylococcus aureus (MRSA) in South-East Austria. The population structure of 327 MRSA isolated between 2002 and 2012 was investigated. MRSA was assigned to 58 different spa types and 14 different MLST CC (multilocus sequence type clonal complexes); in particular, between 2007 and 2012, an increasing diversity in MRSA clones could be observed. The most abundant clonal complex was CC5. On the respective SCC mec cassettes, the CC5 isolates differed clearly within this decade and CC5/SCC mec I, the South German MRSA, predominant in 2002, was replaced by CC5/SCC mec II, the Rhine-Hesse MRSA in 2012. Whereas in many European countries MLST CC22-MRSA (EMRSA 15, the Barnim epidemic MRSA) is predominant, this clone occurred in Austria nearly 10 years later than in neighbouring countries. CC45, the Berlin EMRSA, epidemic in Germany, was only sporadically found in South-East Austria. The Irish ST8-MRSA-II represented by spa -type t190 was frequently found in 2002 and 2007, but disappeared in 2012. Our results demonstrate clonal replacement of MRSA clones within the last years in Austria. Ongoing surveillance is warranted for detection of changes within the MRSA population.

Description: This study aimed to investigate the effects of dietary fibre sources on the gut microbiota in suckling piglets, and to test the hypothesis that a moderate increase of dietary fibre may affect the gut microbiota during the suckling period. Suckling piglets were fed different fibre-containing diets or a control diet from postnatal day 7 to 22. Digesta samples from cecum, proximal colon and distal colon were used for Pig Intestinal Tract Chip analysis. The data showed that the effects of fibre-containing diet on the gut microbiota differed in the fibre source and gut location. The alfalfa diet increased Clostridium cluster XIVb and Sporobacter termitidis in the cecum compared to the pure cellulose diet. Compared to the control diet, the alfalfa diet also increased Coprococcus eutactus in the distal colon, while the pure cellulose diet decreased Eubacterium pyruvativorans in the cecum. The pure cellulose diet increased Prevotella ruminicola compared to the wheat bran diet. Interestingly, the alfalfa group had the lowest abundance of the potential pathogen Streptococcus suis in the cecum and distal colon. These results indicated that a moderate increase in dietary fibres affected the microbial composition in suckling piglets, and that the alfalfa inclusion produced some beneficial effects on the microbial communities.

Description: One function of the gut microbiota gaining recent attention, especially in herbivorous mammals and insects, is the metabolism of plant secondary metabolites (PSMs). We investigated whether this function exists within the gut communities of a specialist avian herbivore. We sequenced the cecal metagenome of the Greater Sage-Grouse ( Centrocercus urophasianus ), which specializes on chemically defended sagebrush ( Artemisia spp.). We predicted that the cecal metagenome of the sage-grouse would be enriched in genes associated with the metabolism of PSMs when compared to the metagenome of the domestic chicken. We found that representation of microbial genes associated with ‘xenobiotic degradation and metabolism’ was 3-fold higher in the sage-grouse cecal metagenomes when compared to that of the domestic chicken. Further, we identified a complete metabolic pathway for the degradation of phenol to pyruvate, which was not detected in the metagenomes of the domestic chicken, bovine rumen or 14 species of mammalian herbivores. Evidence of monoterpene degradation (a major class of PSMs in sagebrush) was less definitive, although we did detect genes for several enzymes associated with this process. Overall, our results suggest that the gut microbiota of specialist avian herbivores plays a similar role to the microbiota of mammalian and insect herbivores in degrading PSMs.

Description: Intracellular endosymbiotic bacteria are common and can play a crucial role for insect pathology. Therefore, such bacteria could be a potential key to our understanding of major losses of Western honey bees ( Apis mellifera ) colonies. However, the transmission and potential effects of endosymbiotic bacteria in A. mellifera and other Apis spp. are poorly understood. Here, we explore the prevalence and transmission of the genera Arsenophonus , Wolbachia , Spiroplasma and Rickettsia in Apis spp. Colonies of A. mellifera ( N = 33, with 20 eggs from worker brood cells and 100 adult workers each) as well as mated honey bee queens of A. cerana , A. dorsata and A. florea ( N = 12 each) were screened using PCR. While Wolbachia , Spiroplasma and Rickettsia were not detected, Arsenophonus spp. were found in 24.2% of A. mellifera colonies and respective queens as well as in queens of A. dorsata (8.3%) and A. florea (8.3%), but not in A. cerana . The absence of Arsenophonus spp. from reproductive organs of A. mellifera queens and surface-sterilized eggs does not support transovarial vertical transmission. Instead, horizontal transmission is most likely.

Description: In Europe, common input data types for seismic hazard evaluation include earthquake catalogues, seismic zonation models and ground motion models, all with well-constrained epistemic uncertainties. In contrast, neotectonic deformation models and their related uncertainties are rarely considered in earthquake forecasting and seismic hazard studies. In this study, for the first time in Europe, we developed a seismic hazard model based exclusively on active fault and geodynamic deformation models. We applied it to the External Dinarides, a slow-deforming fold-and-thrust belt in the Central Mediterranean. The two deformation models furnish consistent long-term earthquake rates above the M w 4.7 threshold on a latitude/longitude grid with 0.2° spacing. Results suggest that the use of deformation models is a valid alternative to empirical-statistical approaches in earthquake forecasting in slow-deforming regions of Europe. Furthermore, we show that the variability of different deformation models has a comparable effect on the peak ground motion acceleration uncertainty as do the ground motion prediction equations.

Description: An important real world application of doublet flow occurs in well design of both geothermal and hydrocarbon reservoirs. A guiding principle for fluid management of injection and extraction wells is that mass balance is commonly assumed between the injected and produced fluid. Because the doublets are considered closed loops, the injection fluid is assumed to eventually reach the producer well and all the produced fluid ideally comes from stream tubes connected to the injector of the well pair making up the doublet. We show that when an aquifer background flow occurs, doublets will rarely retain closed loops of fluid recirculation. When the far-field flow rate increases relative to the doublet's strength, the area occupied by the doublet will diminish and eventually vanishes. Alternatively, rather than using a single injector (source) and single producer (sink), a linear array of multiple injectors separated by some distance from a parallel array of producers can be used in geothermal energy projects as well as in waterflooding of hydrocarbon reservoirs. Fluid flow in such an arrangement of parallel source-sink arrays is shown to be macroscopically equivalent to that of a line doublet. Again, any far-field flow that is strong enough will breach through the line doublet, which then splits into two vortices. Apart from fundamental insight into elementary flow dynamics, our new results provide practical clues that may contribute to improve the planning and design of doublets and direct line drives commonly used for flow management of groundwater, geothermal and hydrocarbon reservoirs.

Description: Wood-rotting fungi possess remarkably diverse extracellular oxidation mechanisms, including enzymes, such as laccase and peroxidases, and Fenton chemistry. The ability to biologically drive Fenton chemistry by the redox cycling of quinones has previously been reported to be present in both ecologically diverging main groups of wood-rotting basidiomycetes. Therefore, we investigated whether it is even more widespread among fungal organisms. Screening of a diverse selection of a total of 18 ascomycetes and basidiomycetes for reduction of the model compound 2,6-dimethoxy benzoquinone revealed that all investigated strains were capable of reducing it to its corresponding hydroquinone. In a second step, depolymerization of the synthetic polymer polystyrene sulfonate was used as a proxy for quinone-dependent Fenton-based biodegradation capabilities. A diverse subset of the strains, including environmentally ubiquitous molds, white-rot fungi, as well as peatland and aquatic isolates, caused substantial depolymerization indicative for the effective employment of quinone redox cycling as biodegradation tool. Our results may also open up new paths to utilize diverse fungi for the bioremediation of recalcitrant organic pollutants.

Description: Ice-binding proteins (IBPs), such as antifreeze proteins (AFPs) and ice-nucleating proteins (INPs), have been described in diverse cold-adapted organisms, and their potential applications in biotechnology have been recognized in various fields. Currently, both IBPs are being applied to biotechnological processes, primarily in medicine and the food industry. However, our knowledge regarding the diversity of bacterial IBPs is limited; few studies have purified and characterized AFPs and INPs from bacteria. Phenotypically verified IBPs have been described in members belonging to Gammaproteobacteria, Actinobacteria and Flavobacteriia classes, whereas putative IBPs have been found in Gammaproteobacteria, Alphaproteobacteria and Bacilli classes. Thus, the main goal of this minireview is to summarize the current information on bacterial IBPs and their application in biotechnology, emphasizing the potential application in less explored fields such as agriculture. Investigations have suggested the use of INP-producing bacteria antagonists and AFPs-producing bacteria (or their AFPs) as a very attractive strategy to prevent frost damages in crops. UniProt database analyses of reported IBPs (phenotypically verified) and putative IBPs also show the limited information available on bacterial IBPs and indicate that major studies are required.

Description: Triazophos is a broad-spectrum and highly effective insecticide, and the residues of triazophos have been frequently detected in the environment. A triazophos-degrading bacterium, Burkholderia sp. SZL-1, was isolated from a long-term triazophos-polluted soil. Strain SZL-1 could hydrolyze triazophos to 1-phenyl-3-hydroxy-1,2,4-triazole, which was further utilized as the carbon sources for growth. The triazophos hydrolase gene trhA , cloned from strain SZL-1, was expressed and homogenously purified using Ni-nitrilotriacetic acid affinity chromatography. TrhA is 55 kDa and displays maximum activity at 25°C, pH 8.0. This enzyme still has nearly 60% activity at the range of 15°C–50°C for 30 min. TrhA was mutated by sequential error prone PCR and screened for improved activity for triazophos degradation. One purified variant protein (Val89-Gly89) named TrhA-M1 showed up to 3-fold improvement in specific activity against triazophos, and the specificity constants of K cat and K cat / K m for TrhA-M1 were improved up to 2.3- and 8.28-fold, respectively, compared to the wild-type enzyme. The results in this paper provided potential material for the contaminated soil remediation and hydrolase genetic structure research.

Description: The metal mining industry faces many large challenges in future years, among which is the increasing need to process low-grade ores as accessible higher grade ores become depleted. This is against a backdrop of increasing global demands for base and precious metals, and rare earth elements. Typically about 99% of solid material hauled to, and ground at, the land surface currently ends up as waste (rock dumps and mineral tailings). Exposure of these to air and water frequently leads to the formation of acidic, metal-contaminated run-off waters, referred to as acid mine drainage, which constitutes a severe threat to the environment. Formation of acid drainage is a natural phenomenon involving various species of lithotrophic (literally ‘rock-eating’) bacteria and archaea, which oxidize reduced forms of iron and/or sulfur. However, other microorganisms that reduce inorganic sulfur compounds can essentially reverse this process. These microorganisms can be applied on industrial scale to precipitate metals from industrial mineral leachates and acid mine drainage streams, resulting in a net improvement in metal recovery, while minimizing the amounts of leachable metals to the tailings storage dams. Here, we advocate that more extensive exploitation of microorganisms in metal mining operations could be an important way to green up the industry, reducing environmental risks and improving the efficiency and the economy of metal recovery.

Description: In November 2010, intense seismic activity including 29 events with a magnitude above 5.0, started in the western part of the Gulf of Aden, where the structure of the oceanic spreading ridge is characterized by a series of N115°-trending slow-spreading segments set within an EW-trending rift. Using signals recorded by permanent and temporary networks in Djibouti and Yemen, we located 1122 earthquakes, with a magnitude ranging from 2.1 to 5.6 from 2010 November 1 to 2011 March 31. By looking in detail at the space–time distribution of the overall seismicity, and both the frequency and the moment tensor of large earthquakes, we re-examine the chronology of this episode. In addition, we also interpret the origin of the activity using high-resolution bathymetric data, as well as from observations of seafloor cable damage caused by high temperatures and lava flows. The analysis allows us to identify distinct active areas. First, we interpret that this episode is mainly related to a diking event along a specific ridge segment, located at E044°. In light of previous diking episodes in nearby subaerial rift segments, for which field constraints and both seismic and geodetic data exist, we interpret the space–time evolution of the seismicity of the first few days. Migration of earthquakes suggests initial magma ascent below the segment centre. This is followed by a southeastward dike propagation below the rift immediately followed by a northwestward dike propagation below the rift ending below the northern ridge wall. The cumulative seismic moment associated with this sequence reaches 9.1 x 10 17 Nm, and taking into account a very low seismic versus geodetic moment, we estimate a horizontal opening of ~0.58–2.9 m. The seismic activity that followed occurred through several bursts of earthquakes aligned along the segment axis, which are interpreted as short dike intrusions implying fast replenishment of the crustal magma reservoir feeding the dikes. Over the whole period, the opening is estimated to be ~1.76–8.8 m across the segment. A striking feature of this episode is that the seismicity remained confined within one individual segment, whereas the adjacent en-echelon segments were totally quiescent, suggesting that the magma supply system of one segment is disconnected from those of the neighbouring segments. Second, we identify activity induced by the first intrusion with epicentres aligned along an N035°E-trending, ~30 km long at the northwestern end of the active opening segment. This group encompasses more than seven earthquakes with magnitude larger than 5.0, and with strike-slip focal mechanisms consistent with the faults identified in the bathymetry and the structural pattern of the area. We propose that a transform fault is currently in formation which indicates an early stage of the ridge segmentation, at the locus of the trend change of the spreading ridge, which also corresponds to the boundary between a clear oceanic lithosphere and the zone of transform between continental and oceanic crust.

Description: We challenge the perspective that seismicity could contribute to polar motion by arguing quantitatively that, in first approximation and on the average, interseismic deformations can compensate for it. This point is important because what we must simulate and observe in Earth Orientation Parameter time-series over intermediate timescales of decades or centuries is the residual polar motion resulting from the two opposing processes of coseismic and interseismic deformations. In this framework, we first simulate the polar motion caused by only coseismic deformations during the longest period available of instrumental seismicity, from 1900 to present, using both the CMT and ISC-GEM catalogues. The instrumental seismicity covering a little longer than one century does not represent yet the average seismicity that we should expect on the long term. Indeed, although the simulation shows a tendency to move the Earth rotation pole towards 133°E at the average rate of 16.5 mm yr –1 , this trend is still sensitive to individual megathrust earthquakes, particularly to the 1960 Chile and 1964 Alaska earthquakes. In order to further investigate this issue, we develop a global seismicity model (GSM) that is independent from any earthquake catalogue and that describes the average seismicity along plate boundaries on the long term by combining information about present-day plate kinematics with the Anderson theory of faulting, the seismic moment conservation principle and a few other assumptions. Within this framework, we obtain a secular polar motion of 8 mm yr –1 towards 112.5°E that is comparable with that estimated from 1900 to present using the earthquake catalogues, although smaller by a factor of 2 in amplitude and different by 20° in direction. Afterwards, in order to reconcile the idea of a secular polar motion caused by earthquakes with our simplest understanding of the seismic cycle, we adapt the GSM in order to account for interseismic deformations and we use it to quantify, for the first time ever, their contribution to polar motion. Taken together, coseismic and interseismic deformations make the rotation pole wander around the north pole with maximum polar excursions of about 1 m. In particular, the rotation pole moves towards about Newfoundland when the interseismic contribution dominates over the coseismic ones (i.e. during phases of low seismicity or, equivalently, when most of the fault system associated with plate boundaries is locked). When megathrust earthquakes occur, instead, the rotation pole is suddenly shifted in an almost opposite direction, towards about 133°E.

Description: While elasticity is a defining characteristic of the Earth's lithosphere, it is often ignored in numerical models of long-term tectonic processes in favour of a simpler viscoplastic description. Here we assess the consequences of this assumption on a well-studied geodynamic problem: the growth of normal faults at an extensional plate boundary. We conduct 2-D numerical simulations of extension in elastoplastic and viscoplastic layers using a finite difference, particle-in-cell numerical approach. Our models simulate a range of faulted layer thicknesses and extension rates, allowing us to quantify the role of elasticity on three key observables: fault-induced topography, fault rotation, and fault life span. In agreement with earlier studies, simulations carried out in elastoplastic layers produce rate-independent lithospheric flexure accompanied by rapid fault rotation and an inverse relationship between fault life span and faulted layer thickness. By contrast, models carried out with a viscoplastic lithosphere produce results that may qualitatively resemble the elastoplastic case, but depend strongly on the product of extension rate and layer viscosity U x L . When this product is high, fault growth initially generates little deformation of the footwall and hanging wall blocks, resulting in unrealistic, rigid block-offset in topography across the fault. This configuration progressively transitions into a regime where topographic decay associated with flexure is fully accommodated within the numerical domain. In addition, high U x L favours the sequential growth of multiple short-offset faults as opposed to a large-offset detachment. We interpret these results by comparing them to an analytical model for the fault-induced flexure of a thin viscous plate. The key to understanding the viscoplastic model results lies in the rate-dependence of the flexural wavelength of a viscous plate, and the strain rate dependence of the force increase associated with footwall and hanging wall bending. This behaviour produces unrealistic deformation patterns that can hinder the geological relevance of long-term rifting models that assume a viscoplastic rheology.

Description: Differential inhibitors are important for measuring the relative contributions of microbial groups, such as ammonia-oxidizing bacteria (AOB) and ammonia-oxidizing archaea (AOA), to biogeochemical processes in environmental samples. In particular, 2-phenyl-4,4,5,5-tetramethylimidazoline-1-oxyl 3-oxide (PTIO) represents a nitric oxide scavenger used for the specific inhibition of AOA, implicating nitric oxide as an intermediate of thaumarchaeotal ammonia oxidation. This study investigated four alternative nitric oxide scavengers for their ability to differentially inhibit AOA and AOB in comparison to PTIO. Caffeic acid, curcumin, methylene blue hydrate and trolox were tested on Nitrosopumilus maritimus , two unpublished AOA representatives (AOA-6f and AOA-G6) as well as the AOB representative Nitrosomonas europaea . All four scavengers inhibited ammonia oxidation by AOA at lower concentrations than for AOB. In particular, differential inhibition of AOA and AOB by caffeic acid (100 μM) and methylene blue hydrate (3 μM) was comparable to carboxy-PTIO (100 μM) in pure and enrichment culture incubations. However, when added to aquarium sponge biofilm microcosms, both scavengers were unable to inhibit ammonia oxidation consistently, likely due to degradation of the inhibitors themselves. This study provides evidence that a variety of nitric oxide scavengers result in differential inhibition of ammonia oxidation in AOA and AOB, and provides support to the proposed role of nitric oxide as a key intermediate in the thaumarchaeotal ammonia oxidation pathway.

Description: Peatlands of all latitudes play an integral role in global climate change by serving as a carbon sink and a primary source of atmospheric methane; however, the microbial ecology of mid-latitude peatlands is vastly understudied. Herein, next generation Illumina amplicon sequencing of small subunit rRNA genes was utilized to elucidate the microbial communities in three southern Appalachian peatlands. In contrast to northern peatlands, Proteobacteria dominated over Acidobacteria in all three sites. An average of 11 bacterial phyla was detected at relative abundance values 〉1%, with three candidate divisions (OP3, WS3 and NC10) represented, indicating high phylogenetic diversity. Physiological traits of isolates within the candidate alphaproteobacterial order, Ellin 329, obtained here and in previous studies indicate that bacteria of this order may be involved in hydrolysis of poly-, di- and monosaccharides. Community analyses indicate that Ellin 329 is the third most abundant order and is most abundant near the surface layers where plant litter decomposition should be primarily occurring. In sum, members of Ellin 329 likely play important roles in organic matter decomposition, in southern Appalachian peatlands and should be investigated further in other peatlands and ecosystem types.

Description: Marine viruses are the most abundant biological entity in the oceans, the majority of which infect bacteria and are known as bacteriophages. Yet, the bulk of bacteriophages form part of the vast uncultured dark matter of the microbial biosphere. In spite of the paucity of cultured marine bacteriophages, it is known that marine bacteriophages have major impacts on microbial population structure and the biogeochemical cycling of key elements. Despite the ecological relevance of marine bacteriophages, there are relatively few isolates with complete genome sequences. This minireview focuses on knowledge gathered from these genomes put in the context of viral metagenomic data and highlights key advances in the field, particularly focusing on genome structure and auxiliary metabolic genes.

Description: The fynbos biome in South Africa is globally recognised as a plant biodiversity hotspot. However, very little is known about the bacterial communities associated with fynbos plants, despite interactions between primary producers and bacteria having an impact on the physiology of both partners and shaping ecosystem diversity. This study reports on the structure, phylogenetic composition and potential roles of the endophytic bacterial communities located in the stems of three fynbos plants ( Erepsia anceps , Phaenocoma prolifera and Leucadendron laureolum ). Using Illumina MiSeq 16S rRNA sequencing we found that different subpopulations of Deinococcus-Thermus, Alphaproteobacteria, Acidobacteria and Firmicutes dominated the endophytic bacterial communities. Alphaproteobacteria and Actinobacteria were prevalent in P. prolifera , whereas Deinococcus-Thermus dominated in L. laureolum , revealing species-specific host–bacteria associations. Although a high degree of variability in the endophytic bacterial communities within hosts was observed, we also detected a core microbiome across the stems of the three plant species, which accounted for 72% of the sequences. Altogether, it seems that both deterministic and stochastic processes shaped microbial communities. Endophytic bacterial communities harboured putative plant growth-promoting bacteria, thus having the potential to influence host health and growth.

Description: In the context of the 2014 realization of the International Terrestrial Reference Frame, the International DORIS (Doppler Orbitography Radiopositioning Integrated by Satellite) Service (IDS) has delivered to the IERS a set of 1140 weekly SINEX files including station coordinates and Earth orientation parameters, covering the time period from 1993.0 to 2015.0. From this set of weekly SINEX files, the IDS combination centre estimated a cumulative DORIS position and velocity solution to obtain mean horizontal and vertical motion of 160 stations at 71 DORIS sites. The main objective of this study is to validate the velocities of the DORIS sites by comparison with external models or time-series. Horizontal velocities are compared with two recent global plate models (GEODVEL 2010 and NNR-MORVEL56). Prior to the comparisons, DORIS horizontal velocities were corrected for Global Isostatic Adjustment from the ICE-6G (VM5a) model. For more than half of the sites, the DORIS horizontal velocities differ from the global plate models by less than 2–3 mm yr –1 . For five of the sites (Arequipa, Dionysos/Gavdos, Manila and Santiago) with horizontal velocity differences with respect to these models larger than 10 mm yr –1 , comparisons with GNSS estimates show the veracity of the DORIS motions. Vertical motions from the DORIS cumulative solution are compared with the vertical velocities derived from the latest GPS cumulative solution over the time span 1995.0–2014.0 from the University of La Rochelle solution at 31 co-located DORIS-GPS sites. These two sets of vertical velocities show a correlation coefficient of 0.83. Vertical differences are larger than 2 mm yr –1 at 23 percent of the sites. At Thule, the disagreement is explained by fine-tuned DORIS discontinuities in line with the mass variations of outlet glaciers. Furthermore, the time evolution of the vertical time-series from the DORIS station in Thule show similar trends to the GRACE equivalent water height.

Description: We have used ensemble averages of satellite-derived free-air gravity anomaly data, together with inverse modelling techniques, to determine the effective elastic thickness, T e , of circum-Pacific subducting oceanic lithosphere and its relationship to plate age. Synthetic modelling tests show that T e can be recovered best using gravity anomaly, rather than bathymetry, data and profiles that are at least 750 km long. Inverse modelling based on a uniform T e elastic plate suggests that T e increases with age of the subducting oceanic lithosphere and is given approximately by the depth to the 390 ± 10 °C oceanic isotherm based on a cooling plate model. Misfits between the observed and calculated gravity anomalies are significantly improved if a mechanically weak zone is included between the trench axis and the outer rise. This weak zone is coincident with observations of bend-faulting and seismicity. Inverse modelling shows that T e landward of the outer rise is generally 40–65 per cent less than the T e seaward of the outer rise. Both landward and seaward T e increases with age of the lithosphere and are given by the depth to the 342–349 °C and 671–714 °C oceanic isotherm, respectively. A dependence of T e on age is consistent with models for the cooling of oceanic lithosphere as it moves away from a mid-ocean ridge and the temperature-dependent ductile creep of oceanic lithospheric minerals such as olivine. By comparing the observed T e to the predicted T e based on laboratory-derived yield strength envelopes and an assumption of elastic-perfectly plastic deformation, we have attempted to constrain the rheology of oceanic lithosphere. Regardless of the assumed friction coefficient, the dry-olivine low-temperature plasticity flow laws of Goetze, Evans & Goetze, Raterron et al . and Mei et al . all provide quite a good fit to the observed T e at circum-Pacific subduction zones. This result contrasts with the Hawaiian Islands, where these flow laws are generally too strong to fit the observations. The discrepancy in rheology within Pacific plate may be caused by differences in the timescale of loading and therefore the amount of viscoelastic stress relaxation that has occurred. Other possibilities include thermal rejuvenation and magma-assisted flexure at the Hawaiian Islands.

Description: Large gaps and inconsistencies remain in published estimates of Nubia–Somalia plate motion based on reconstructions of seafloor spreading data around Africa. Herein, we use newly available reconstructions of the Southwest Indian Ridge at ~1-Myr intervals since 20 Ma to estimate Nubia–Somalia plate motion farther back in time than previously achieved and with an unprecedented degree of temporal resolution. At the northern end of the East African rift, our new estimates of Nubia–Somalia motion for six times from 0.78 Ma to 5.2 Ma differ by only 2 per cent from the rift-normal component of motion that is extrapolated from a recently estimated GPS angular velocity. The rate of rift-normal extension thus appears to have remained steady since at least 5.2 Ma. Our new rotations indicate that the two plates have moved relative to each other since at least 16 Ma and possibly longer. Motion has either been steady since at least 16 Ma or accelerated modestly between 6 and 5.2 Ma. Our Nubia–Somalia rotations predict 42.5 ± 3.8 km of rift-normal extension since 10.6 Ma across the well-studied, northern segment of the Main Ethiopian Rift, consistent with 40–50 km estimates for extension since 10.6 Myr based on seismological surveys of this narrow part of the plate boundary. Nubia–Somalia rotations are also derived by combining newly estimated Somalia–Arabia rotations that reconstruct the post-20-Ma opening of the Gulf of Aden with Nubia–Arabia rotations estimated via a probabilistic analysis of plausible opening scenarios for the Red Sea. These rotations predict Nubia–Somalia motion since 5.2 Myr that is consistent with that determined from Southwest Indian Ridge data and also predict 40 ± 3 km of rift-normal extension since 10.6 Ma across the Main Ethiopian Rift, consistent with our 42.5 ± 3.8 km Southwest Indian Ridge estimate. Our new rotations exclude at high confidence level previous estimates of 12 ± 13 and 123 ± 14 km for rift-normal extensions across the Main Ethiopian Rift since 10.6 Ma based on reconstructions of Chron 5n.2 along the Southwest Indian Ridge. Sparse coverage of magnetic reversals older than 16 Ma along the western third of the Southwest Indian Ridge precludes reliable determinations of Nubia–Somalia plate motion before 16 Ma, leaving unanswered the key question of when the motion between the two plates began.

Description: The TAMMAR segment of the Mid-Atlantic Ridge forms a classic propagating system centred about two degrees south of the Kane Fracture Zone. The segment is propagating to the south at a rate of 14 mm yr –1 , 15 per cent faster than the half-spreading rate. Here, we use seismic refraction data across the propagating rift, sheared zone and failed rift to investigate the crustal structure of the system. Inversion of the seismic data agrees remarkably well with crustal thicknesses determined from gravity modelling. We show that the crust is thickened beneath the highly magmatic propagating rift, reaching a maximum thickness of almost 8 km along the seismic line and an inferred (from gravity) thickness of about 9 km at its centre. In contrast, the crust in the sheared zone is mostly 4.5–6.5 km thick, averaging over 1 km thinner than normal oceanic crust, and reaching a minimum thickness of only 3.5 km in its NW corner. Along the seismic line, it reaches a minimum thickness of under 5 km. The PmP reflection beneath the sheared zone and failed rift is very weak or absent, suggesting serpentinisation beneath the Moho, and thus effective transport of water through the sheared zone crust. We ascribe this increased porosity in the sheared zone to extensive fracturing and faulting during deformation. We show that a bookshelf-faulting kinematic model predicts significantly more crustal thinning than is observed, suggesting that an additional mechanism of deformation is required. We therefore propose that deformation is partitioned between bookshelf faulting and simple shear, with no more than 60 per cent taken up by bookshelf faulting.

Description: The functioning of many natural and engineered environments is dependent on long distance electron transfer mediated through electrical currents. These currents have been observed in exoelectrogenic biofilms and it has been proposed that microbial biofilms can mediate electron transfer via electrical currents on the centimeter scale. However, direct evidence to confirm this hypothesis has not been demonstrated and the longest known electrical transfer distance for single species exoelectrogenic biofilms is limited to 100 μm. In the present study, biofilms were developed on electrodes with electrically non-conductive gaps from 50 μm to 1 mm and the in situ conductance of biofilms was evaluated over time. Results demonstrated that the exoelectrogenic mixed species biofilms in the present study possess the ability to transfer electrons through electrical currents over a distance of up to 1 mm, 10 times further than previously observed. Results indicate the possibility of interspecies interactions playing an important role in the spatial development of exoelectrogenic biofilms, suggesting that these biological networks might remain conductive even at longer distance. These findings have significant implications in regards to future optimization of microbial electrochemical systems.

Description: Bacteriophages are increasingly being used as water quality indicators. Two groups of phages infecting Escherichia coli , somatic and F-specific coliphages, are being considered as indicators of fecal and viral contamination for several types of water around the world. However, some uncertainties remain regarding which coliphages to assess. Recently, E. coli strain CB390 has been reported to be suitable for simultaneous detection of both groups, which seems to be more informative than determining only one of the groups. Here, a significant number of samples from different settings, mostly those where F-specific phages have been reported to outnumber somatic coliphages, are analyzed for somatic coliphages, F-specific RNA phages by standardized methods and coliphages detected by host strain CB390. The results presented here confirm that the numbers of phages counted using CB390 are equivalent to the sum of the somatic and F-specific coliphages counted independently in all settings. Hence the usefulness of this strain for simultaneous detection of somatic and F-specific coliphages is confirmed. Also, sets of data on the presence of coliphages in reclaimed and groundwater are reported.

Description: It is well known that Methylosinus trichosporium OB3b has two forms of methane monooxygenase (MMO) responsible for the initial conversion of methane to methanol, a cytoplasmic (soluble) methane monooxygenase and a membrane-associated (particulate) methane monooxygenase, and that copper strongly regulates expression of these alternative forms of MMO. More recently, it has been discovered that M. trichosporium OB3b has multiple types of the methanol dehydrogenase (MeDH), i.e. the Mxa-type MeDH (Mxa-MeDH) and Xox-type MeDH (Xox-MeDH), and the expression of these two forms is regulated by the availability of the rare earth element (REE), cerium. Here, we extend these studies and show that lanthanum, praseodymium, neodymium and samarium also regulate expression of alternative forms of MeDH. The effect of these REEs on MeDH expression, however, was only observed in the absence of copper. Further, a mutant of M. trichosporium OB3b, where the Mxa-MeDH was knocked out, was able to grow in the presence of lanthanum, praseodymium and neodymium, but was not able to grow in the presence of samarium. Collectively, these data suggest that multiple levels of gene regulation by metals exist in M. trichosporium OB3b, but that copper overrides the effect of other metals by an as yet unknown mechanism.

Description: A Neogene magmatic reactivation of the Manihiki Plateau, a large igneous province (LIP) in the central Pacific, is studied using seismic reflection data. Igneous diapirs have been identified exclusively within a narrow WNW–ESE striking corridor in the southern High Plateau (HP), which is parallel to the Neogene Pacific Plate motion and overlaps with an extrapolation of the Society Islands Hotspot (SIH) path. The igneous diapirs are characterized by a narrow width (〉5 km), penetration of the Neogene sediments, and they become progressively younger towards the East (23–10 Ma). The magmatic source appears to be of small lateral extent, which leads to the conclusion that the diapirs represent Neogene hotspot volcanism within a LIP, and thus may be an older, previously unknown extension of the SIH track (〉4.5 Ma). Comparing hotspot volcanism within oceanic and continental lithosphere, we further conclude that hotspot volcanism within LIP crust has similarities to tectonically faulted continental crust.

Description: Many mechanisms control the state of stress within Earth plates. First-order well-known mechanisms include stresses induced by lateral variations of lithospheric density structure, sublithospheric tractions, ridge push and subduction pull. In this study, we attempt to quantify the influence of these mechanisms to understand the origin of stresses in the lithosphere, choosing the African plate (TAP) as an example. A finite-element based suite, Proshell, was developed to combine several data sets, to estimate the gravitational potential energy (GPE) of the lithosphere and to calculate stresses acting on the real (non-planar) geometry of TAP. We introduce several quantitative parameters to measure the degree of fit between the model and observations. Our modelling strategy involves nine series of numerical experiments. We start with the simplest possible model and then, step by step, build it up to be a more physically realistic model, all the while discussing the influence of each additional component. The starting (oversimplified) model series (1) is based on the CRUST2 data set for the crust and a half-space-cooling approximation of the lithospheric mantle. We then describe models (series 2–5) that account for lithospheric mantle density heterogeneities to build a more reliable GPE model. The consecutive series involve basal traction from the convective mantle (series A, C) and the rheological heterogeneity of the TAP via variations in its effective elastic thickness (series B, C). The model quality reflects the increase in complexity between series with an improving match to observed stress regimes and directions. The most complex model (series D) also accounts for the bending stresses in the elastic lithosphere and achieves a remarkably good fit to observations. All of our experiments were based on the iteration of controlling parameters in order to achieve the best fit between modelled and observed stresses, always considering physically feasible values. This gives us confidence that our methodology appropriately models the stress pattern of Africa, and that it may be further applied to other plates on Earth. Our modelling approach allows us to quantify several important features controlling the lithospheric stress pattern. Even though the initial oversimplified model does not fit the observations satisfactorily, it shows how ridge push may create significant compressive stresses in the lithosphere. More complex models show the importance of the density structure of the lithosphere, specifically in the subcrustal lithosphere. The stress regime within the TAP mainly results from a global balance of masses and mass moments between continental and oceanic parts of the plate. The orientation of stresses, in turn, is influenced more by local features expressed by topographic and crustal density variations, whereas existent subcrustal density variations appear to be smoothed by the crust above. The models show that accounting separately for either basal tractions or rheological heterogeneities brings moderate improvement, but the combination of these two mechanisms results in a substantially better match between model and observations. The bending stresses caused by isostatical re-adjustment improve the model match, but they have to be analysed with caution because of their depth-dependent nature.

Description: The Red Sea and Gulf of Aden represent two young basins that formed between Africa and Arabia since the early Oligocene, floored by oceanic crust or by transitional and thinned continental crust. While in the easternmost Gulf of Aden, the rift–drift transition can be dated chron C6 (~20.1 Ma), here we show that in the Red Sea the first pulse of seafloor spreading occurred during chron C3n.2n (~4.6 Ma) around ~17.1°N (present-day coordinates) and propagated southwards from this location, separating the Danakil microplate from Arabia. It is also shown that seafloor spreading between Arabia and Nubia started later, around chron 2A (~2.58 Ma), and propagated northwards. At present, there is no magnetic evidence for the existence of a linear spreading centre in the northern Red Sea at latitudes higher than ~24°N and in the southern Red Sea below ~14.8°N. The present-day plate kinematics of this region can be described with high accuracy by a network of five interacting plates (Nubia, Arabia, Somalia, Sinai and Danakil) and six triple junctions. For times older than anomaly 2A (~2.58 Ma) and up to anomaly 3, the absence of marine magnetic anomalies between Arabia and Nubia prevents a rigorous kinematic description of the five-plates system. However, there is strong evidence that the unique changes in plate motions during the last 5 Myr were a dramatic slowdown at chron C2 (~1.77 Ma) in the spreading or extension rates along the ridge and rift axes, thereby a good representation of the real plate motions can be obtained anyway by backward extension of the oldest Arabia–Nubia and Arabia–Danakil stage rotations determined on the basis of marine magnetic anomalies, respectively, C2–C2A and C2A–C3. The proposed kinematic reconstructions are accompanied by a geodynamic explanation for the genesis of large continent–continent fracture zones at the rift–drift transition and by an analysis of the strain associated with plate motions in Afar, northeastern Egypt and Sinai.

Description: On 2016 February 6 the South Taiwan earthquake ( M w 6.4) occurred in the Meinong District of Kaohsiung, southern Taiwan, at a depth of 17 km. It caused 117 fatalities and widespread damage to infrastructures, especially in the Tainan city. To clarify the generating mechanism of this damaging earthquake, we determined high-resolution 3-D images of P - and S -wave velocity ( V P , V S ) and Poisson's ratio ( ) in the epicentral area. We used 105 712 P - and 61 250 S -wave arrival times of 8279 local earthquakes (1.5 ≤ M ≤ 6.4) recorded at 41 seismic stations in South Taiwan during 2000–2011. In the upper crust (depth ≤ 10 km), the most remarkable feature is low- V P , low- V S and high- anomalies in areas with known active faults in the southwestern and easternmost parts of Taiwan. In contrast, high- V P , high- V S and low- anomalies become dominant in the lower crust. The hypocentre of the 2016 South Taiwan earthquake is located in a boundary zone where seismic velocity and Poisson's ratio change drastically in both the horizontal and vertical directions. Furthermore, the hypocentre is underlain by a vertically elongated high- anomaly at depths of 23–40 km, which may reflect ascending fluids from the upper (or uppermost) mantle. The low- V and high- anomalies in the upper crust coincide with areas of low heat flow, negative Bouguer gravity anomaly, and low magnetotelluric resistivity, which may reflect crustal fluids contained in the young fold-and-thrust belt. These results suggest that the 2016 South Taiwan earthquake was triggered by ascending fluids from dehydration of the subducting Eurasian slab, invading into active faults with a high loading rate.

Description: Polysulfides (S x 2– ) are sulfide oxidation intermediates that are important for a variety of environmentally relevant processes including pyrite formation, organic matter sulfidization, isotope exchange among reduced sulfur species, and metal chelation. In addition to their chemical reactivity, laboratory experiments with microbial cultures and enzymes indicate both indirect and direct roles for microorganisms in affecting polysulfide chemistry in natural environments through production and consumption. As polysulfides have been detected in a wide array of natural systems ranging from microbial mats to hydrothermal vents, constraining their biogeochemical cycling has broad impacts. However, many questions remain regarding the processes responsible for polysulfide dynamics in these environments and the precise role that microorganisms play in these processes. This review provides a summary of laboratory experiments investigating the role of polysulfides in microbial metabolism, and observations of polysulfides in the environment in order to provide further insight into and highlight open questions about this significant component of the sulfur cycle.

Description: Crystallization experiments in the dendritic regime have been carried out in hypergravity conditions (from 1 to 1300 g) from an ammonium chloride solution (NH 4 Cl and H 2 O). A commercial centrifuge was equipped with a slip ring so that electric power (needed for a Peltier device and a heating element), temperature and ultrasonic signals could be transmitted between the experimental setup and the laboratory. Ultrasound measurements (2–6 MHz) were used to detect the position of the front of the mushy zone and to determine attenuation in the mush. Temperature measurements were used to control a Peltier element extracting heat from the bottom of the setup and to monitor the evolution of crystallization in the mush and in the liquid. A significant increase of solid fraction and attenuation in the mush is observed as gravity is increased. Kinetic undercooling is significant in our experiments and has been included in a macroscopic mush model. The other ingredients of the model are conservation of energy and chemical species, along with heat/species transfer between the mush and the liquid phase: boundary-layer exchanges at the top of the mush and bulk convection within the mush (formation of chimneys). The outputs of the model compare well with our experiments. We have then run the model in a range of parameters suitable for the Earth's inner core. This has shown the role of bulk mush convection for the inner core and the reason why a solid fraction very close to unity should be expected. We have also run melting experiments: after crystallization of a mush, the liquid has been heated from above until the mush started to melt, while the bottom cold temperature was maintained. These melting experiments were motivated by the possible local melting at the inner core boundary that has been invoked to explain the formation of the anomalously slow F-layer at the bottom of the outer core or inner core hemispherical asymmetry. Oddly, the consequences of melting are an increase in solid fraction and a decrease in attenuation. It is hence possible that surface seismic velocity and attenuation of the inner core are strongly affected by melting.

Description: The coupling that exists between surface processes and deformation within both the shallow crust and the deeper mantle-lithosphere has stimulated the development of computational geodynamic models that incorporate a free surface boundary condition. We introduce a treatment of this boundary condition that is suitable for staggered grid, finite difference schemes employing a structured Eulerian mesh. Our interface capturing treatment discretizes the free surface boundary condition via an interface that conforms with the edges of control volumes (e.g. a ‘staircase’ representation) and requires only local stencil modifications to be performed. Comparisons with analytic solutions verify that the method is first-order accurate. Additional intermodel comparisons are performed between known reference models to further validate our free surface approximation. Lastly, we demonstrate the applicability of a multigrid solver to our free surface methodology and demonstrate that the local stencil modifications do not strongly influence the convergence of the iterative solver.

Description: Ellesmere Island in Arctic Canada displays a complex geological evolution. The region was affected by two distinct orogenies, the Palaeozoic Ellesmerian orogeny (the Caledonian equivalent in Arctic Canada and Northern Greenland) and the Palaeogene Eurekan orogeny, related to the opening of Baffin Bay and the consequent convergence of the Greenland plate. The details of this complex evolution and the present-day deep structure are poorly constrained in this remote area and deep geophysical data are sparse. Receiver function analysis of seven temporary broad-band seismometers of the Ellesmere Island Lithosphere Experiment complemented by two permanent stations provides important data on the crustal velocity structure of Ellesmere Island. The crustal expression of the northernmost tectonic block of Ellesmere Island (~82°–83°N), Pearya, which was accreted during the Ellesmerian orogeny, is similar to that at the southernmost part, which is part of the Precambrian Laurentian (North America-Greenland) craton. Both segments have thick crystalline crust (~35–36 km) and comparable velocity–depth profiles. In contrast, crustal thickness in central Ellesmere Island decreases from ~24–30 km in the Eurekan fold and thrust belt (~79.7°–80.6°N) to ~16–20 km in the Hazen Stable Block (HSB; ~80.6°–81.4°N) and is covered by a thick succession of metasediments. A deep crustal root (~48 km) at ~79.6°N is interpreted as cratonic crust flexed beneath the Eurekan fold and thrust belt. The Carboniferous to Palaeogene sedimentary succession of the Sverdrup Basin is inferred to be up to 1–4 km thick, comparable to geologically-based estimates, near the western margin of the HSB.

Description: A total of 65 spore-forming mercury-resistant bacteria were isolated from natural environments worldwide in order to understand the acquisition of additional genes by and dissemination of mercury resistance transposons across related Bacilli genera by horizontal gene movement. PCR amplification using a single primer complementary to the inverted repeat sequence of Tn MERI1 -like transposons showed that 12 of 65 isolates had a transposon-like structure. There were four types of amplified fragments: Tn 5084 , Tn 5085 , Tn d MER3 (a newly identified deleted transposon-like fragment) and Tn 6294 (a newly identified transposon). Tn d MER3 is a 3.5-kb sequence that carries a merRETPA operon with no merB or transposase genes. It is related to the mer operon of Bacillus licheniformis strain FA6-12 from Russia. DNA homology analysis shows that Tn 6294 is an 8.5-kb sequence that is possibly derived from Tn d MER3 by integration of a Tn MERI1 -type transposase and resolvase genes and in addition the merR2 and merB1 genes. Bacteria harboring Tn 6294 exhibited broad-spectrum mercury resistance to organomercurial compounds, although Tn 6294 had only merB1 and did not have the merB2 and merB3 sequences for organomercurial lyases found in Tn 5084 of B. cereus strain RC607. Strains with Tn 6294 encode mercuric reductase (MerA) of less than 600 amino acids in length with a single N-terminal mercury-binding domain, whereas MerA encoded by strains MB1 and RC607 has two tandem domains. Thus, Tn d MER3 and Tn 6294 are shorter prototypes for Tn MERI1 -like transposons. Identification of Tn 6294 in Bacillus sp. from Taiwan and in Paenibacillus sp. from Antarctica indicates the wide horizontal dissemination of Tn MERI1 -like transposons across bacterial species and geographical barriers.

Description: Joint analysis of the seismic velocities and geoid, gravity and gravity gradients are used to constrain the viscosity profile within the mantle as well as the lateral density variations. Recent ESA's Gravity field and steady-state Ocean Circulation Explorer measurements of the second-order derivatives of the Earth's gravity potential give new possibilities to determine these mantle properties. Using a simple mantle model and seismic tomography results, we investigate how the gravitational potential, the three components of the gravity vector and the gravity gradients can bring information on the radial viscosity profile and on the mantle mass anomalies. We start with lateral density variations in the Earth's mantle based either on slab history or deduced from seismic tomography. The main uncertainties are: for the latter case, the relationship between seismic velocity and density—the so-called density/velocity scaling factor—and for the former case, the variation with depth of the density contrast between the cold slabs and the surrounding mantle. We perform a Monte Carlo search for the viscosity and the density/velocity scaling factor profiles within the mantle, which allows to fit the observed geoid, gravity and gradients of gravity. We compute the posterior probability distribution of the unknown parameters, and find that the gravity gradients improve the estimate of the scaling factor within the upper mantle, because of their sensitivity to the masses within the upper mantle, whereas the geoid and the gravity better constrain the scaling factor in the lower mantle. In the upper mantle, it is less than 0.02 in the upper part and about 0.08–0.14 in the lower part, and it is significantly larger for depths greater than 1200 km (about 0.32–0.34). In any case, the density/velocity scaling factor between 670 and 1150 km depth is not well constrained. We show that the viscosity of the upper part of the mantle is strongly correlated with the viscosity of the lower part of the mantle and that the viscosity profile is characterized by a decrease in the lower part of the upper mantle (about 10 20 –2  x  10 20 Pa s) and by an increase (about 10 23 –2  x  10 23 Pa s) at the top of the lower mantle (between 670 and 1150 km). The viscosity of the mantle below 1150 km depth is well estimated in our Monte Carlo search and is about 10 22 –4  x  10 22 Pa s.

Description: Large-scale topography may be due to several causes, including (1) variations in crustal thickness and density structure, (2) oceanic lithosphere age differences, (3) subcrustal density variations in the continental lithosphere and (4) convective flow in the mantle beneath the lithosphere. The last contribution in particular may change with time and be responsible for continental inundations; distinguishing between these contributions is therefore important for linking Earth's history to its observed geological record. As a step towards this goal, this paper aims at such distinction for the present-day topography: the approach taken is deriving a ‘model’ topography due to contributions (3) and (4), along with a model geoid, using a geodynamic mantle flow model. Both lithosphere thickness and density anomalies beneath the lithosphere are inferred from seismic tomography. Density anomalies within the continental lithosphere are uncertain, because they are probably due to variations in composition and temperature, making a simple scaling from seismic to density anomalies inappropriate. Therefore, we test a number of different assumptions regarding these. As a reality check, model topography is compared, in terms of both correlation and amplitude ratio, to ‘residual’ topography, which follows from observed topography after subtracting contributions (1) and (2). The model geoid is compared to observations as well. Comparatively good agreement is found if there is either an excess density of 0.2 per cent in the lithosphere above 150 km depth, with anomalies below as inferred from tomography, or if the excess density is 0.4 per cent in the entire lithosphere. Further, a good fit is found for viscosity 10 20 Pa s in the asthenosphere, increasing to 10 23 Pa s in the lower mantle above D'. Results are quite dependent on which tomography models they are based on; for some recent ones, topography correlation is 0.6, many smaller scale features are matched, topography amplitude is less than 30 per cent too large, while geoid variance reduction exceeds 70 per cent—overall a considerable improvement compared to previous models. Correlation becomes less if smaller scale features (corresponding to spherical harmonic degrees 15 and higher), which are probably largely due to anomalies in the lithosphere, are also considered. Comparison of results with different viscosity structures, and a regional comparison of amplitude ratios, indicates that lateral viscosity variations can be quite strong, but only leading to moderate variations in model topography of a factor probably less than two.

Description: Fungi may play an important role in the production of the greenhouse gas nitrous oxide (N 2 O). Bipolaris sorokiniana is a ubiquitous saprobe found in soils worldwide, yet denitrification by this fungal strain has not previously been reported. We aimed to test if B. sorokiniana would produce N 2 O and CO 2 in the presence of organic and inorganic forms of nitrogen (N) under microaerobic and anaerobic conditions. Nitrogen source (organic-N, inorganic-N, no-N control) significantly affected N 2 O and CO 2 production both in the presence and absence of oxygen, which contrasts with bacterial denitrification. Inorganic N addition increased denitrification of N 2 O (from 0 to 0.3 μg N 2 0-N h –1  g –1 biomass) and reduced respiration of CO 2 (from 0.1 to 0.02 mg CO 2 h –1  g –1 biomass). Isotope analyses indicated that nitrite, rather than ammonium or glutamine, was transformed to N 2 O. Results suggest the source of N may play a larger role in fungal N 2 O production than oxygen status.

Description: Legionella pneumophila is a pathogenic bacterium commonly found in water and responsible for severe pneumonia. Free-living amoebae are protozoa also found in water, which feed on bacteria by phagocytosis. Under favorable conditions, some L. pneumophila are able to resist phagocytic digestion and even multiply within amoebae. However, it is not clear whether L. pneumophila could infect at a same rate a large range of amoebae or if there is some selectivity towards specific amoebal genera or strains. Also, most studies have been performed using collection strains and not with freshly isolated strains. In our study, we assess the permissiveness of freshly isolated environmental strains of amoebae, belonging to three common genera (i.e. Acanthamoeba, Naegleria and Vermamoeba ), for growth of L. pneumophila at three different temperatures. Our results indicated that all the tested strains of amoebae were permissive to L. pneumophila Lens and that there was no significant difference between the strains. Intracellular proliferation was more efficient at a temperature of 40°C. In conclusion, our work suggests that, under favorable conditions, virulent strains of L. pneumophila could equally infect a large number of isolates of common freshwater amoeba genera.

Description: Oblique convergence across Tibet leads to slip partitioning with the coexistence of strike-slip, normal and thrust motion on major fault systems. A key point is to understand and model how faults interact and accumulate strain at depth. Here, we extract ground deformation across the Haiyuan Fault restraining bend, at the northeastern boundary of the Tibetan plateau, from Envisat radar data spanning the 2001–2011 period. We show that the complexity of the surface displacement field can be explained by the partitioning of a uniform deep-seated convergence. Mountains and sand dunes in the study area make the radar data processing challenging and require the latest developments in processing procedures for Synthetic Aperture Radar interferometry. The processing strategy is based on a small baseline approach. Before unwrapping, we correct for atmospheric phase delays from global atmospheric models and digital elevation model errors. A series of filtering steps is applied to improve the signal-to-noise ratio across high ranges of the Tibetan plateau and the phase unwrapping capability across the fault, required for reliable estimate of fault movement. We then jointly invert our InSAR time-series together with published GPS displacements to test a proposed long-term slip-partitioning model between the Haiyuan and Gulang left-lateral Faults and the Qilian Shan thrusts. We explore the geometry of the fault system at depth and associated slip rates using a Bayesian approach and test the consistency of present-day geodetic surface displacements with a long-term tectonic model. We determine a uniform convergence rate of 10 [8.6–11.5] mm yr –1 with an N89 [81–97]°E across the whole fault system, with a variable partitioning west and east of a major extensional fault-jog (the Tianzhu pull-apart basin). Our 2-D model of two profiles perpendicular to the fault system gives a quantitative understanding of how crustal deformation is accommodated by the various branches of this thrust/strike-slip fault system and demonstrates how the geometry of the Haiyuan fault system controls the partitioning of the deep secular motion.

Description: In this paper, we study stability of the rate, state and temperature friction (RSTF) model. The Segall and Rice approach is used to model heat transfer at the sliding interface with its surroundings. The effect of pore pressure is not considered in the model to avoid the complex expression for critical stiffness. Linear stability analysis of the spring-mass sliding system is carried out with the ageing law under the quasistatic conditions in order to determine the critical stiffness above which sliding behaviour changes from unstable to stable or vice versa. Our numerical simulations establish that critical stiffness of the heated surface may increase or decrease from corresponding to the critical stiffness of the unheated surface depending on the relative values of two contradictory parameters related with velocity effect and temperature effect. Parametric studies are also carried out to understand shear velocity and temperature of the sliding surface dependence of steady friction. The RSTF model is also used to study the gravity induced failure of a creeping rock slope and the results are justified.

Description: The Siple Coast region of Antarctica contains a number of fast-flowing ice streams, which control the dynamics and mass balance of the region. These ice streams are known to undergo stagnation and reactivation cycles, which lead to ice thickness changes that may be sufficient to excite a viscous solid Earth response (glacial isostatic adjustment; GIA). This study aims to quantify Siple Coast ice thickness changes during the last 2000 yr in order to determine the degree to which they might contribute to GIA and associated present-day bedrock uplift rates. This is important because accurate modelling of GIA is necessary to determine the rate of present-day ice-mass change from satellite gravimetry. Recently-published reconstructions of ice-stream variability were used to create a suite of kinematic models for the stagnation-related thickening of Kamb Ice Stream since ~1850 AD, and a GIA model was used to predict present-day deformation rates in response to this thickening. A number of longer-term loading scenarios, which include the stagnation and reactivation of ice streams across the Siple Coast over the past 2000 yr, were also constructed, and used to investigate the longer term GIA signal in the region. Uplift rates for each of the ice loading histories, based on a range of earth models, were compared with regional GPS-observed uplift rates and an empirical GIA estimate. We estimate Kamb Ice Stream to have thickened by 70–130 m since stagnation ~165 years ago. Modelled present-day vertical motion in response to this load increase peaks at –17 mm yr –1 (i.e. 17 mm yr –1 subsidence) for the weakest earth models tested here. Comparison of the solid Earth response to ice load changes throughout the last glacial cycle, including ice stream stagnation and reactivation across the Siple Coast during the last 2000 yr, with an empirical GIA estimate suggests that the upper mantle viscosity of the region is greater than 1 x 10 20 Pa s. When upper mantle viscosity values of 1 x 10 20  Pa s or smaller are combined with our suite of ice-load scenarios we predict uplift rates across Siple Coast that are at least 4 mm yr –1 smaller than those predicted by the empirical GIA estimate. GPS data are unable to further constrain model parameters due to the distance of the GPS sites from the study area. Our results demonstrate that Late Holocene ice load changes related to the stagnation and reactivation of ice streams on the Siple Coast may play a dominant role in defining the present-day uplift signal. However, both the detailed Earth structure and deglacial history of the region need to be better constrained in order to reduce uncertainties associated with the GIA signal of this region.

Description: Growth media have been developed to facilitate the enrichment and isolation of acidophilic and acid-tolerant sulfate-reducing bacteria (aSRB) from environmental and industrial samples, and to allow their cultivation in vitro . The main features of the ‘standard’ solid and liquid devised media are as follows: (i) use of glycerol rather than an aliphatic acid as electron donor; (ii) inclusion of stoichiometric concentrations of zinc ions to both buffer pH and to convert potentially harmful hydrogen sulphide produced by the aSRB to insoluble zinc sulphide; (iii) inclusion of Acidocella aromatica (an heterotrophic acidophile that does not metabolize glycerol or yeast extract) in the gel underlayer of double layered (overlay) solid media, to remove acetic acid produced by aSRB that incompletely oxidize glycerol and also aliphatic acids (mostly pyruvic) released by acid hydrolysis of the gelling agent used (agarose). Colonies of aSRB are readily distinguished from those of other anaerobes due to their deposition and accumulation of metal sulphide precipitates. Data presented illustrate the effectiveness of the overlay solid media described for isolating aSRB from acidic anaerobic sediments and low pH sulfidogenic bioreactors.

Description: The thickness and equivalent global sea level contribution of an improved model of the central and northern Laurentide Ice Sheet is constrained by 24 relative sea level histories and 18 present-day GPS-measured vertical land motion rates. The final model, termed Laur16, is derived from the ICE-5G model by holding the timing history constant and iteratively adjusting the thickness history, in four regions of northern Canada. In the final model, the last glacial maximum (LGM) thickness of the Laurentide Ice Sheet west of Hudson Bay was ~3.4–3.6 km. Conversely, east of Hudson Bay, peak ice thicknesses reached ~4 km. The ice model thicknesses inferred for these two regions represent, respectively, a ~30 per cent decrease and an average ~20–25 per cent increase to the load thickness relative to the ICE-5G reconstruction, which is generally consistent with other recent studies that have focussed on Laurentide Ice Sheet history. The final model also features peak ice thicknesses of 1.2–1.3 km in the Baffin Island region, a modest reduction relative to ICE-5G and unchanged thicknesses for a region in the central Canadian Arctic Archipelago west of Baffin Island. Vertical land motion predictions of the final model fit observed crustal uplift rates well, after an adjustment is made for the elastic crustal response to present-day ice mass changes of regional ice cover. The new Laur16 model provides more than a factor of two improvement of the fit to the RSL data ( 2 measure of misfit) and a factor of nine improvement to the fit of the GPS data (mean squared error measure of fit), compared to the ICE-5G starting model. Laur16 also fits the regional RSL data better by a factor of two and gives a slightly better fit to GPS uplift rates than the recent ICE-6G model. The volume history of the Laur16 reconstruction corresponds to an up to 8 m reduction in global sea level equivalent compared to ICE-5G at LGM.

Description: The 2011 October 23 M W 7.1 Van earthquake in eastern Turkey caused ~600 deaths and caused widespread damage and economic loss. The seismogenic rupture was restricted to 10–25 km in depth, but aseismic surface creep, coincident with outcrop fault exposures, was observed in the hours to months after the earthquake. We combine observations from radar interferometry, seismology, geomorphology and Quaternary dating to investigate the geological slip rate and seismotectonic context of the Van earthquake, and assess the implications for continuing seismic hazard in the region. Transient post-seismic slip on the upper Van fault started immediately following the earthquake, and decayed over a period of weeks; it may not fully account for our long-term surface slip-rate estimate of ≥0.5 mm yr –1 . Post-seismic slip on the Bostanici splay fault initiated several days to weeks after the main shock, and we infer that it may have followed the M W  5.9 aftershock on the 9th November. The Van earthquake shows that updip segmentation can be important in arresting seismic ruptures on dip-slip faults. Two large, shallow aftershocks show that the upper 10 km of crust can sustain significant earthquakes, and significant slip is observed to have reached the surface in the late Quaternary, so there may be a continuing seismic hazard from the upper Van fault and the associated splay. The wavelength of folding in the hanging wall of the Van fault is dominated by the structure in the upper 10 km of the crust, masking the effect of deeper seismogenic structures. Thus, models of subsurface faulting based solely on surface folding and faulting in regions of reverse faulting may underestimate the full depth extent of seismogenic structures in the region. In measuring the cumulative post-seismic offsets to anthropogenic structures, we show that Structure-from-Motion can be rapidly deployed to create snapshots of post-seismic displacement. We also demonstrate the utility of declassified Corona mission imagery (1960s–1970s) for geomorphic mapping in areas where recent urbanization has concealed the geomorphic markers.

Description: Within a slab experiencing present-day lateral break-off, a particular type of earthquakes is expected to cluster at the detachment horizon tip: namely, events generated by reverse faulting, with the approximately horizontal compression involved acting along the strike of the slab. Such a cluster of moderate magnitude earthquakes (4.7 ≤  m b ≤ 5.0) was identified in this study at the 160–175 km depth range of the Vrancea seismogenic body, in the Southeast Carpathians mountains collision environment. The corresponding cluster epicentres were systematically positioned at the boundary between a region being subject ( cf. published GPS records), to present-day upward movements, and another one that underwent present-day subsidence. Such an overall setting seems to suggest that a lateral break-off is currently developing at the indicated depth within the Vrancea slab, leading to topographic uplift above the already detached slab section, and to enhanced subsidence above the section to which the gravitational slab pull was being transferred. In addition, by taking into account some systematic time correspondence which we documented between moderate magnitude events of the 160–175 km depth cluster and the subsequent strong Vrancea shocks ( M w ≥ 6.9), it appears that the latter, although occurring at much shallower depths (roughly, in the 80–140 km range), were also controlled by the break-off progress.

Description: Bajada del Diablo is located in the Northern Patagonian Massif, Chubut, Argentina. The study area includes several circular structures found in Miocene olivine basalts of the Quiñelaf Eruptive Complex and in the Late Pliocene/Early Pleistocene Pampa Sastre conglomerates. An impact origin has been proposed for these circular structures. With the aim of further investigate the proposed impact origin, topographic, gravimetric, magnetic, resistivity, palaeomagnetic and electromagnetic surveys in two circular structures (‘8’ and ‘G’) located in Pampa Sastre conglomerates and in basalts of the Quiñelaf Eruptive Complex were carried out. The new geophysical results support the hypothesis of an impact origin. However, the confirmation of such an origin through the findings of shock metamorphism evidences and/or the recovery of meteorites remains elusive.

Description: A common dye of prussian blue (PB) as an indicator was used to develop a colorimetric method for detecting the efficacy of the antibiotics in vitro. Considering the electronic production capacity of microbial respiration, ferricyanide was employed in transferring electrons from target microorganism of Escherichia coli ( E. coli ) to produce ferrocyanide. Subsequently, ferrocyanide reacted with ferric ions to form PB. In view of relationship between the PB yield and the bacterial activity, the efficacy of the antibiotics on E. coli was directly detected at 700 nm of PB absorption. When the 5% activity of antibiotics on 20 isolates of E. coli was quantified as 5% efficacy, the applied concentrations of eight antibiotics, such as cefepime, ceftriaxone sodium, cefoperazone sodium, piperacillin sodium, amoxicillin, gentamicin, amikacin and levofloxacin were 2, 2, 4, 4, 10, 4, 8 and 8 μg mL –1 , respectively. To compare with minimum inhibitory concentration results obtained by Clinical and Laboratory Standards Institute broth macrodilution method, the results of PB methods showed good agreements except with gentamicin. Paired t- test result ( P ) also showed that difference between two methods was statistically significant ( P = 0.006).

Description: Metarhizium acridum is an entomopathogenic fungus commonly used as a bioinsecticide. The conidium is the fungal stage normally employed as field inoculum in biological control programs and must survive under field conditions such as high ultraviolet-B (UV-B) exposure. Light, which is an important stimulus for many fungi, has been shown to induce the production of M. robertsii conidia with increased stress tolerance. Here we show that a two-hour exposure to white or blue/UV-A light of fast-growing mycelium induces tolerance to subsequent UV-B irradiation. Red light, however, does not have the same effect. In addition, we established that this induction can take place with as little as 1 min of white-light exposure. This brief illumination scheme could be relevant in future studies of M. acridum photobiology and for the production of UV-B resistant mycelium used in mycelium-based formulations for biological control.

Description: Photorhabdus (Enterobacteriaceae) bacteria are pathogenic to insects and mutualistic with entomopathogenic Heterorhabditis nematodes . Photorhabdus luminescens subsp. akhurstii LN2, associated with Heterorhabditis indica LN2, shows nematicidal activity against H. bacteriophora H06 infective juveniles (IJs). In the present study, an rpoS mutant of P. luminescens LN2 was generated through allelic exchange to examine the effects of rpoS deletion on the nematicidal activity and nematode development. The results showed that P. luminescens LN2 required rpoS for nematicidal activity against H06 nematodes, normal IJ recovery and development of H. indica LN2, however, not for the bacterial colonization in LN2 and H06 IJs. This provides cues for further understanding the role of rpoS in the mutualistic association between entomopathogenic nematodes and their symbionts.

Description: Catechol 2, 3-dioxygenase (C23O) is the key enzyme for aerobic aromatic degradation. Based on clone libraries and quantitative real-time polymerase chain reaction, we characterized diversity and distribution patterns of C23O genes in surface sediments of the Bohai Sea. The results showed that sediments of the Bohai Sea were dominated by genes related to C23O subfamily I.2.A. The samples from wastewater discharge area (DG) and aquaculture farm (KL) showed distinct composition of C23O genes when compared to the samples from Bohai Bay (BH), and total organic carbon was a crucial determinant accounted for the composition variation. C6BH12-38 and C2BH2-35 displayed the highest gene copies and highest ratios to the 16S rRNA genes in KL, and they might prefer biologically labile aromatic hydrocarbons via aquaculture inputs. Meanwhile, C7BH3-48 showed the highest gene copies and highest ratios to the 16S rRNA genes in DG, and this could be selective effect of organic loadings from wastewater discharge. An evident increase in C6BH12-38 and C7BH3-48 gene copies and reduction in diversity of C23O genes in DG and KL indicated composition perturbations of C23O genes and potential loss in functional redundancy. We suggest that ecological habitat and trophic specificity could shape the distribution of C23O genes in the Bohai Sea sediments.

Description: Estimating in situ stress based on hydraulic fracturing data typically depends on interpretation of the breakdown, secondary breakdown (‘reopening’) and shut-in pressure. While it has been recognized that the near-wellbore stress field should be taken into account and that the compressibility of the injection system and the viscous flow of the fluid can diminish the accuracy of stress estimates, these issues have not been well quantified. A coupled numerical model that includes the compressibility of the injection system and the flow of a viscous fluid in a plane-strain hydraulic fracture extending from a wellbore, in an impermeable rock, and in the presence of a non-isotropic in situ stress field provides a basic tool for estimating the order of the error associated with hydraulic fracturing stress measurements under non-ideal conditions. The main findings of this work are model-based guidelines on the values of relevant dimensionless parameter groups to ensure sufficient accuracy of stress estimates that use idealized models. When these guidelines cannot be met under field conditions, the model can be further applied to obtain first-order corrections that account for compressibility, viscosity and near-wellbore effects.

Description: We consider the problem of seismic velocity change estimation using ambient noise recordings. Motivated by Zhan et al. , we study how the velocity change estimation is affected by seasonal fluctuations in the noise sources. More precisely, we consider a numerical model and introduce spatio-temporal seasonal fluctuations in the noise sources. We show that indeed, as pointed out by Zhan et al. , the stretching method is affected by these fluctuations and produces misleading apparent velocity variations which reduce dramatically the signal to noise ratio of the method. We also show that these apparent velocity variations can be eliminated by an adequate normalization of the cross-correlation functions. Theoretically we expect our approach to work as long as the seasonal fluctuations in the noise sources are uniform, an assumption which holds for closely located seismic stations. We illustrate with numerical simulations in homogeneous and scattering media that the proposed normalization significantly improves the accuracy of the velocity change estimation. Similar behaviour is also observed with real data recorded in the Aegean volcanic arc. We study in particular the volcano of Santorini during the seismic unrest of 2011–2012 and observe a decrease in the velocity of seismic waves which is correlated with GPS measured elevation.

Description: LysR-type transcriptional regulators (LTTRs) regulate various cellular processes in bacteria. pnpR is an LTTR-encoding gene involved in the regulation of hydroquinone (HQ) degradation, and its effects on the cellular processes of Pseudomonas putida DLL-E4 were investigated at the physiological, biochemical and molecular levels. Reverse transcription polymerase chain reaction revealed that pnpR positively regulated its own expression and that of the pnpC1C2DECX1X2 operon; additionally, pnpR partially regulated the expression of pnpA when P. putida was grown on para -nitrophenol (PNP) or HQ. Strains DLL-E4 and DLL- pnpR exhibited similar cellular morphologies and growth rates. Transcriptome analysis revealed that pnpR regulated the expression of genes in addition to those involved in PNP degradation. A total of 20 genes were upregulated and 19 genes were downregulated by at least 2-fold in strain DLL- pnpR relative to strain DLL-E4. Bioinformatic analysis revealed putative PnpR-binding sites located in the upstream regions of genes involved in PNP degradation, carbon catabolite repression and other cellular processes. The utilization of L-aspartic acid, L-histidine, L-pyroglutamic acid, L-serine, -aminobutyric acid, D,L-lactic acid, D-saccharic acid, succinic acid and L-alaninamide was increased at least 1.3-fold in strain DLL- pnpR as shown by BIOLOG assays, indicating that pnpR plays a potential negative regulation role in the utilization of carbon sources.

Description: Passive seismic experiment was carried out at the SW contact of the Dinarides and Pannonian basin to determine the crustal structure and velocity discontinuities. The aim of the experiment was to define the relationship between the Adriatic microplate and the Pannonian segment as a part of the European plate. Most of the temporary seismic stations were deployed in Croatia along the Alp07 profile—a part of the active-source ALP 2002 project. About 300-km-long profile stretches from Istra peninsula to the Drava river, in a WSW–ESE direction. Teleseismic events recorded on 13 temporary seismic stations along the profile were analysed by P -receiver function method. Two types of characteristic receiver functions (RF) have been identified, belonging to Dinaridic and Pannonian crusts as defined on the Alp07 profile, while in transitional zone there are both types. Three major crustal discontinuities can be identified for the Dinaridic type: sedimentary basement, intracrustal discontinuity and Mohorovičić discontinuity, whereas the Pannonian type revealed only two discontinuities. The intracrustal discontinuity was not observed in the Pannonian type, thus pointing to a single-layered crust in the Pannonian basin. Two interpretation methods were applied: forward modelling of the receiver functions and H – stacking method, and the results were compared with the active-source seismic data at deep refraction profile Alp07. The receiver function modelling has given reliable results of the Moho depths that are in accordance with the seismic refraction results at the end of the Alp07 profile, that is in the area of Pannonian crust characterized by simple crustal structure and low seismic velocities ( Vp between 5.9 and 6.2 km s –1 ). In the Dinarides and its peripheral parts, receiver function modelling regularly gives greater Moho depths, up to +15 per cent, due to more complex crustal structure. The depths of the Moho calculated by the H – stacking method vary within wide limits (±13 km), due to band limited data of short-period stations. The results at five stations have to be rejected because of huge deviations in comparison with all previous results, while at the other seven stations the Moho depths vary within ±15 per cent around the Moho discontinuity of the Alp07 profile.

Description: Megathrust earthquakes of magnitude close to 9 are followed by large-scale (thousands of km) and long-lasting (decades), significant crustal and mantle deformation. This deformation can be observed at the surface and quantified with GPS measurements. Here we report on deformation observed during the 5 yr time span after the 2010 M w 8.8 Maule Megathrust Earthquake (2010 February 27) over the whole South American continent. With the first 2 yr of those data, we use finite element modelling (FEM) to relate this deformation to slip on the plate interface and relaxation in the mantle, using a realistic layered Earth model and Burgers rheologies. Slip alone on the interface, even up to large depths, is unable to provide a satisfactory fit simultaneously to horizontal and vertical displacements. The horizontal deformation pattern requires relaxation both in the asthenosphere and in a low-viscosity channel along the deepest part of the plate interface and no additional low-viscosity wedge is required by the data. The vertical velocity pattern (intense and quick uplift over the Cordillera) is well fitted only when the channel extends deeper than 100 km. Additionally, viscoelastic relaxation alone cannot explain the characteristics and amplitude of displacements over the first 200 km from the trench and aseismic slip on the fault plane is needed. This aseismic slip on the interface generates stresses, which induce additional relaxation in the mantle. In the final model, all three components (relaxation due to the coseismic slip, aseismic slip on the fault plane and relaxation due to aseismic slip) are taken into account. Our best-fit model uses slip at shallow depths on the subduction interface decreasing as function of time and includes (i) an asthenosphere extending down to 200 km, with a steady-state Maxwell viscosity of 4.75 x 10 18 Pa s; and (ii) a low-viscosity channel along the plate interface extending from depths of 55–135 km with viscosities below 10 18 Pa s.

Description: We provide an updated present-day stress map for the Italian territory. Following the World Stress Map (WSM) Project guidelines, we list the different stress indicators, explaining the criteria used to select data. We discuss the data, which will also be included in the 2016 release of the WSM, highlighting the areas for which we have added stress information. Our map displays the minimum horizontal stress orientations inferred from crustal stress indicators down to 40 km depth using data of A–C quality, updated for earthquakes until December 2015. We have completely reviewed all data, and the data set now contains 855 entries, in contrast to the previous 715. The number of data with A–C quality of 630 corresponds to an increase of 26 per cent relative to the previous data set. In particular, the new data set contains the results of the analysis of borehole breakouts, critically reviewed data from earthquake focal mechanisms, data concerning active faults, formal inversions of focal mechanisms of seismic sequences or of restricted areas and one stress determination from overcoring. The new data set defines the stress field in areas not well covered by the previous data: the region north to the Po Plain and the central Adriatic sea, both characterized by a thrust- and strike-faulting regime, the northern Sicilian belt with a prevailing normal-faulting regime, and the Ionian sea with a strike-slip regime.

Description: Landfills are significant global sources of atmospheric methane, but little is known about the ecology and community structure of methanogens in these sites. Here, we investigated the methanogen community based on methyl coenzyme M reductase A gene amplicons in the vertical profiles of three different sites at a municipal landfill complex in China. Links between methanogen communities and refuse properties were explored using multivariate analysis. Clone library results showed that most clones (92%) were related to the hydrogenotrophic methanogens, Methanomicrobiales. Almost all of the Methanomicrobiales clones retrieved in this study are members of the genus Methanoculleus . Eight clones were affiliated with the genus Methanofollis . The remaining clones were clustered within the genus Methanosarcina . Terminal restriction fragment length polymorphism profiles showed that the landfill was predominated by 22 taxa, making up 69%–96% of the community. Of these, a single taxon comprised 36%–65% of the communities across all sites and depths. Principal components analysis separated the methanogen community into three groups, irrespective of site or depth. Redundancy analysis suggested that total phosphorus and pH play roles in structuring methanogen communities in landfills.

Description: Measurements of the velocity field associated with plumes rising through a viscous fluid are performed using stereoscopic Particle-Image Velocimetry in the Rayleigh number range 4.4 x 10 5 –6.4 x 10 5 . The experimental model is analogous to a mantle plume rising from the core–mantle boundary to the base of the lithosphere. The behaviour of the plume is studied throughout its life cycle, which is broken up into four stages; the Formation Stage, when the plume forms; the Rising Stage, when the plume rises through the fluid; the Spreading Stage, when the plume reaches the surface and spreads; and finally the Declining Stage, when the heat source has been removed and the plume weakens. The latter three stages are examined in terms of the Finite-Time Lyapunov Exponent fields and the advection of passive tracers throughout the flow. The temperature at the heater and near the fluid surface are measured using thermocouples to infer how the presence of a mantle plume would produce excess temperature near the lithosphere throughout the various stages of its life cycle. In all experiments, a time lag is observed between the removal of the heat source and the decline in the excess temperature near the surface, which is proportional to the rise time. A simple analytical model is presented, which suggests that under mantle conditions (i.e. negligible thermal diffusion), the relationship between the time lag and the rise time is robust and independent of the Rayleigh number; however, the constant of proportionality is closer to unity in the absence of diffusion. Once the heat source is removed, the excess temperature near the surface declines exponentially at a rate that is inversely proportional to the rise time. The implications of this result are discussed in terms of the decline in volcanism in the Louisville hotspot chain over the past 20 Ma. The rise velocity of material in the plume is examined; the rise velocity is found to vary significantly with the plume height in a manner that is inconsistent with many of the common semi-analytical models of thermal plumes in the literature. It is also argued that this height dependency will cause estimates of the rise velocity based on the decay series of uranium isotopes to significantly underestimate the true value.

Description: The Makran subduction zone is one of the last convergent margins to be investigated using space-based geodesy. While there is a lack of historical and modern instrumentation in the region, a sparse sampling of continuous and campaign measurements over the past decade has allowed us to make the first estimates of convergence rates. We combine GPS measurements from 20 stations located in Iran, Pakistan and Oman along with hypocentral locations from the International Seismological Centre to create a preliminary 3-D estimate of the geometry of the megathrust, along with a preliminary fault-coupling model for the Makran subduction zone. Using a convergence rate which is strongly constrained by measurements from the incoming Arabia plate along with the backslip method of Savage, we find the Makran subduction zone appears to be locked to a depth of at least 38 km and accumulating strain.We also find evidence for a segmentation of plate coupling, with a 300 km long section of reduced plate coupling. The range of acceptable locking depths from our modelling and the 900 km along-strike length for the megathrust, makes the Makran subduction zone capable of earthquakes up to M w  = 8.8. In addition, we find evidence for slow-slip-like transient deformation events on two GPS stations. These observations are suggestive of transient deformation events observed in Cascadia, Japan and elsewhere.

Description: Here we report a newly identified ‘Chalky back’ phenomenon in banana prawns ( Fenneropenaeus merguiensis ) farmed in North Queensland, Australia. This was characterized by localized white discoloured segmentation of the cervical groove, moreover, after cooking the prawns exploded, making them unfit for commercial sale. Histological examination revealed breakdown of gut and abdominal muscle tissue in some moribund specimens. We selectively isolated Vibrio spp., which are known prawn pathogens, from healthy and Chalky back specimens. Isolated bacteria were identified, typed and tested for the presence of eight virulence genes (VGs), biofilm formation, adherence and cytotoxicity to fish cells. In all, 32 isolates were recovered and identified as Vibrio harveyi , V. owensii , V. sinaloensis -like, V. campbellii , V. shilonii , Vibrio sp. and Photobacterium damselae using 16S rRNA gene sequencing. All V. harveyi carried VGs coding for haemolysin, tox R and flagella; formed biofilm; and adhered to both cell lines. This was similar to the V. sinaloensis -like strains that were only isolated from Chalky back specimens. Our data suggest that Vibrio spp. may play a role in the pathogenesis of Chalky back. This study is the first report of Chalky back phenomenon in farmed banana prawns that needs to be closely monitored by the industry.

Description: We present numerical models of mantle dynamics forced by plate velocities history in the last 450 Ma. The lower-mantle rheology and the thickness of a dense basal layer are systematically varied and several initial procedures are considered for each case. For some cases, the dependence on the mantle convection vigour is also examined. The resulting evolution of the CMB heat flux is analysed in terms of criteria to promote or inhibit reversals inferred from numerical dynamos. Most models present a rather dynamic lower mantle with the emergence of two thermochemical piles towards present-day. Only a small minority of models present two stationary piles over the last 450 Myr. At present-day, the composition field obtained in our models is found to correlate better with tomography than the temperature field. In addition, the temperature field immediately at the CMB (and thus the heat flux pattern) slightly differs from the average temperature field over the 100-km thick mantle layer above it. The evolution of the mean CMB heat flux or of the amplitude of heterogeneity seldom presents the expected correlation with the evolution of the palaeomagnetic reversal frequency suggesting these effects cannot explain the observations. In contrast, our analysis favours ‘inertial control’ on the geodynamo associated with polar cooling and in some cases break of Taylor columns in the outer core as sources of increased reversal frequency. Overall, the most likely candidates among our mantle dynamics models involve a viscosity increase in the mantle equal or smaller than 30: models with a discontinuous viscosity increase at the transition zone tend to agree better at present-day with observations of seismic tomography, but models with a gradual viscosity increase agree better with some of the criteria proposed to affect reversal frequency.

Description: Lateral viscosity variations (LVVs) in the mantle influence geodynamic processes and their surface expressions. With the observed long-wavelength geoid, free-air anomaly, gravity gradient in three directions and discrete, high-accuracy residual topography, we invert for depth- and temperature-dependent and tectonically regionalized mantle viscosity with a mantle flow model. The inversions suggest that long-wavelength gravitational and topographic signals are mainly controlled by the radial viscosity profile; the pre-Cambrian lithosphere viscosity is slightly (~ one order of magnitude) higher than that of oceanic and Phanerozoic lithosphere; plate margins are substantially weaker than plate interiors; and viscosity has only a weak apparent, dependence on temperature, suggesting either a balancing between factors or a smoothing of actual higher amplitude, but short wavelength, LVVs. The predicted large-scale lithospheric stress regime (compression or extension) is consistent with the world stress map (thrust or normal faulting). Both recent compiled high-accuracy residual topography and the predicted dynamic topography yield ~1 km amplitude long-wavelength dynamic topography, inconsistent with recent studies suggesting amplitudes of ~100 to ~500 m. Such studies use a constant, positive admittance (transfer function between topography and gravity), in contrast to the evidence which shows that the earth has a spatially and wavelength-dependent admittance, with large, negative admittances between ~4000 and ~10 4 km wavelengths.

Description: Plant-growth-promoting bacteria belonging to Azospirillum and Pseudomonas genera are major inhabitants of the rhizosphere. Both are increasingly commercialized as crops inoculants. Interspecific interaction in the rhizosphere is critical for inoculants aptness. The objective of this work was to evaluate Azospirillum and Pseudomonas interaction in mixed biofilms by co-cultivation of the model strains Azospirillum brasilense Sp245 and Pseudomonas protegens CHA0. The results revealed enhanced growth of both strains when co-cultured in static conditions. Moreover, Sp245 biofilm formed in plastic surfaces was increased 2-fold in the presence of CHA0. Confocal microscopy revealed highly structured mixed biofilms showing Sp245 mainly on the bottom and CHA0 towards the biofilm surface. In addition, A. brasilense biofilm was thicker and denser when co-cultured with P. protegens. In a colony–colony interaction assay, Sp245 changed nearby CHA0 producing small colony phenotype, which accounts for a diffusible metabolite mediator; though CHA0 spent medium did not affect Sp245 colony phenotype. Altogether, these results point to a cooperative interaction between A. brasilense Sp245 and P. protegens CHA0 in which both strains increase their static growth and produce structured mixed biofilms with a strain-specific distribution.

Description: Knowledge about the factors shaping the rumen microbiota in wild animals is limited. Therefore, the aim of this study was to compare the microbiota from the three cervid species moose ( Alces alces , n = 5), red deer ( Cervus elaphus , n = 4) and roe deer ( Capreolus capreolus , n = 12), sharing the same habitat. Using deep 16S rRNA gene sequencing, we found that the largest species moose had the highest number of unique operational taxonomic units. Furthermore, red deer and moose shared more of the microbiota, compared with the smallest species, roe deer, with Firmicutes and Euryarchaeota being significantly overrepresented for the shared microbiota. These differences could not be explained by diet or range. The animals largely shared the same range, and there are no systematic differences in diet. We therefore believe rumen physiology can be one of the main contributing factors to the observed distribution of the rumen microbiota in cervid species.

Description: We present a new, computationally efficient numerical method to simulate global seismic wave propagation in realistic 3-D Earth models. We characterize the azimuthal dependence of 3-D wavefields in terms of Fourier series, such that the 3-D equations of motion reduce to an algebraic system of coupled 2-D meridian equations, which is then solved by a 2-D spectral element method (SEM). Computational efficiency of such a hybrid method stems from lateral smoothness of 3-D Earth models and axial singularity of seismic point sources, which jointly confine the Fourier modes of wavefields to a few lower orders. We show novel benchmarks for global wave solutions in 3-D structures between our method and an independent, fully discretized 3-D SEM with remarkable agreement. Performance comparisons are carried out on three state-of-the-art tomography models, with seismic period ranging from 34 s down to 11 s. It turns out that our method has run up to two orders of magnitude faster than the 3-D SEM, featured by a computational advantage expanding with seismic frequency.

Description: We report on a study to explore the deep electrical conductivity structure of the Dead Sea Basin (DSB) using magnetotelluric (MT) data collected along a transect across the DSB where the left lateral strike-slip Dead Sea transform (DST) fault splits into two fault strands forming one of the largest pull-apart basins of the world. A very pronounced feature of our 2-D inversion model is a deep, subvertical conductive zone beneath the DSB. The conductor extends through the entire crust and is sandwiched between highly resistive structures associated with Precambrian rocks of the basin flanks. The high electrical conductivity could be attributed to fluids released by dehydration of the uppermost mantle beneath the DSB, possibly in combination with fluids released by mid- to low-grade metamorphism in the lower crust and generation of hydrous minerals in the middle crust through retrograde metamorphism. Similar high conductivity zones associated with fluids have been reported from other large fault systems. The presence of fluids and hydrous minerals in the middle and lower crust could explain the required low friction coefficient of the DST along the eastern boundary of the DSB and the high subsidence rate of basin sediments. 3-D inversion models confirm the existence of a subvertical high conductivity structure underneath the DSB but its expression is far less pronounced. Instead, the 3-D inversion model suggests a deepening of the conductive DSB sediments off-profile towards the south, reaching a maximum depth of approximately 12 km, which is consistent with other geophysical observations. At shallower levels, the 3-D inversion model reveals salt diapirism as an upwelling of highly resistive structures, localized underneath the Al-Lisan Peninsula. The 3-D model furthermore contains an E–W elongated conductive structure to the northeast of the DSB. More MT data with better spatial coverage are required, however, to fully constrain the robustness of the above-mentioned off-profile features.

Description: Estimating how topography is maintained provides insights into the different factors responsible for surface deformations and their relative roles. Here, we develop a new and simple approach to assess the degree of isostatic compensation of continental topography at regional scale from GOCE gravity gradients. We calculate the ratio between the radial gradient observed by GOCE and that calculated from topography only. From analytical and statistical formulations, simple relationships between this ratio and the degree of compensation are obtained under the Airy–Heiskanen isostasy hypothesis. Then, a value of degree of compensation at each point of study area can be easily deduced. We apply our method to the Alaska-Canada Cordillera and validate our results by comparison with a standard isostatic gravity anomaly model and additional geophysical information for this area. Both our GOCE-based results and the isostatic anomaly show that Airy–Heiskanen isostasy prevails for the Yukon Plateau whereas additional mechanisms are required to support topography below the Northwest Territories Craton and the Yakutat collision zone.

Description: Bayesian sampling based inversions require many thousands or even millions of forward models, depending on how nonlinear or non-unique the inverse problem is, and how many unknowns are involved. The result of such a probabilistic inversion is not a single ‘best-fit’ model, but rather a probability distribution that is represented by the entire model ensemble. Often, a geophysical inverse problem is non-unique, and the corresponding posterior distribution is multimodal, meaning that the distribution consists of clusters with similar models that represent the observations equally well. In these cases, we would like to visualize the characteristic model properties within each of these clusters of models. However, even for a moderate number of inversion parameters, a manual appraisal for a large number of models is not feasible. This poses the question whether it is possible to extract end-member models that represent each of the best-fit regions including their uncertainties. Here, I show how a machine learning tool can be used to characterize end-member models, including their uncertainties, from a complete model ensemble that represents a posterior probability distribution. The model ensemble used here results from a nonlinear geodynamic inverse problem, where rheological properties of the lithosphere are constrained from multiple geophysical observations. It is demonstrated that by taking vertical cross-sections through the effective viscosity structure of each of the models, the entire model ensemble can be classified into four end-member model categories that have a similar effective viscosity structure. These classification results are helpful to explore the non-uniqueness of the inverse problem and can be used to compute representative data fits for each of the end-member models. Conversely, these insights also reveal how new observational constraints could reduce the non-uniqueness. The method is not limited to geodynamic applications and a generalized MATLAB code is provided to perform the appraisal analysis.

Description: Inference of the mantle viscosity from observations for glacial isostatic adjustment (GIA) process has usually been conducted through the analyses based on the simple three-layer viscosity model characterized by lithospheric thickness, upper- and lower-mantle viscosities. Here, we examine the viscosity structures for the simple three-layer viscosity model and also for the two-layer lower-mantle viscosity model defined by viscosities of 670, D (670- D km depth) and D ,2891 ( D -2891 km depth) with D -values of 1191, 1691 and 2191 km. The upper-mantle rheological parameters for the two-layer lower-mantle viscosity model are the same as those for the simple three-layer one. For the simple three-layer viscosity model, rate of change of degree-two zonal harmonics of geopotential due to GIA process (GIA-induced 2 ) of –(6.0–6.5)  x  10 –11 yr –1 provides two permissible viscosity solutions for the lower mantle, (7–20)  x  10 21 and (5–9)  x  10 22  Pa s, and the analyses with observational constraints of the 2 and Last Glacial Maximum (LGM) sea levels at Barbados and Bonaparte Gulf indicate (5–9)  x  10 22  Pa s for the lower mantle. However, the analyses for the 2 based on the two-layer lower-mantle viscosity model only require a viscosity layer higher than (5–10)  x  10 21  Pa s for a depth above the core–mantle boundary (CMB), in which the value of (5–10)  x  10 21  Pa s corresponds to the solution of (7–20)  x  10 21  Pa s for the simple three-layer one. Moreover, the analyses with the 2 and LGM sea level constraints for the two-layer lower-mantle viscosity model indicate two viscosity solutions: 670,1191  〉 3  x  10 21 and 1191,2891  ~ (5–10)  x  10 22  Pa s, and 670,1691  〉 10 22 and 1691,2891  ~ (5–10)  x  10 22  Pa s. The inferred upper-mantle viscosity for such solutions is (1–4)  x  10 20  Pa s similar to the estimate for the simple three-layer viscosity model. That is, these analyses require a high viscosity layer of (5–10)  x  10 22  Pa s at least in the deep mantle, and suggest that the GIA-based lower-mantle viscosity structure should be treated carefully in discussing the mantle dynamics related to the viscosity jump at ~670 km depth. We also preliminarily put additional constraints on these viscosity solutions by examining typical relative sea level (RSL) changes used to infer the lower-mantle viscosity. The viscosity solution inferred from the far-field RSL changes in the Australian region is consistent with those for the 2 and LGM sea levels, and the analyses for RSL changes at Southport and Bermuda in the intermediate region for the North American ice sheets suggest the solution of 670, D  〉 10 22 , D ,2891  ~ (5–10)  x  10 22  Pa s ( D  = 1191 or 1691 km) and upper-mantle viscosity higher than 6  x  10 20  Pa s.

Description: Mesorhizobium loti MAFF303099 has a functional Type III secretion system (T3SS) that is involved in the determination of competitiveness for legume nodulation. Here we demonstrate that the transcriptional factor TtsI, which positively regulates T3SS genes expression, is involved in a negative regulation of M. loti swimming motility in soft-agar. Conditions that induce T3SS expression affect flagella production. The same conditions also affect promoter activity of M. loti visN gene, a homolog to the positive regulator of flagellar genes that has been described in other rhizobia. Defects in T3SS complex assembly at membranes limited the negative regulation of motility by the expression of TtsI.

Description: Mid-crustal conductors are a common phenomenon in magnetotelluric studies. In the Andean Cordillera of southern Chile, they appear to concentrate along major fault zones. A high-resolution, broad-band magnetotelluric survey including 31 stations has been carried out along two profiles perpendicular to (1) the Liquiñe-Ofqui Fault Systems (LOFS) and (2) the Villarrica-Quetrupillán-Lanín volcanic lineament running parallel to the Mocha-Villarrica Fault Zone (MVFZ). The survey aimed at tracing one of the known conductors from mid-crustal depth to near-surface along these faults. Directionality and dimensionality were analysed using tensor decomposition. Phase tensors and induction arrows reveal two major geoelectric strike directions following the strike of LOFS and MVFZ. 2-D inversion shows low resistivity zones along both fault systems down to a depth of 〉10 km, where the brittle-ductile transition is expected. Along the LOFS, the two anomalies are linked to (1) Lake Caburgua, where the LOFS broadens to about 2 km of lateral extension and seems to represent a pull-apart structure, and (2) the intersection with the Villarrica-Quetrupillán-Lanín volcanic lineament, where seismic activity was observed during the latest eruption in March 2015. A connection of the mid-crustal conductor to the ESE-WNW-striking fault zones is indicated from the presented data.

Description: Frequent burning is commonly undertaken to maintain diversity in temperate grasslands of southern Australia. How burning affects below-ground fungal community diversity remains unknown. We show, using a fungal rDNA metabarcoding approach (Illumina MiSeq), that the fungal community composition was influenced by fire regime (frequency) but not time-since-fire. Fungal community composition was resilient to direct fire effects, most likely because grassland fires transfer little heat to the soil. Differences in the fungal community composition due to fire regime was likely due to associated changes that occur in vegetation with recurrent fire, via the break up of obligate symbiotic relationships. However, fire history only partially explains the observed dissimilarity in composition among the soil samples, suggesting a distinctiveness in composition in each grassland site. The importance of considering changes in soil microbe communities when managing vegetation with fire is highlighted.

Description: Soil is thought to be important both as a source and a sink of carbonyl sulfide (COS) in the troposphere, but the mechanism affecting COS uptake, especially for fungi, remains uncertain. Fungal isolates that were collected randomly from forest soil showed COS-degrading ability at high frequencies: 38 out of 43 isolates grown on potato dextrose agar showed degradation of 30 ppmv COS within 24 h. Of these isolates, eight degraded 30 ppmv of COS to below the detection limit within 2 h. These isolates also showed an ability to degrade COS included in ambient air (around 500 pptv) and highly concentrated (12 500 ppmv) level, even though the latter is higher than the lethal level for mammals. COS-degrading activity was estimated by using ergosterol as a biomass index for fungi. Trichoderma sp. THIF08 had the highest COS-degrading activity of all the isolates. Interestingly, Umbelopsis/Mortierella spp. THIF09 and THIF13 were unable to degrade 30 ppmv COS within 24 h, and actually emitted COS during the cultivation in ambient air. These results indicate a fungal contribution to the flux of COS between the terrestrial and atmospheric environments.

Description: We present new rotations that describe the relative positions and velocities of the Pacific and North America plates at 22 times during the past 19.7 Myr, offering 1-Myr temporal resolution for studies of the geotectonic evolution of western North America and other plate boundary locations. Derived from 18 000 magnetic reversal, fracture zone and transform fault identifications from the Pacific–Antarctic–Nubia–North America plate circuit and the velocities of 935 GPS sites on the Pacific and North America plates, the new rotations and GPS-derived angular velocity indicate that the rate of motion between the two plates increased by 70 per cent from 19.7 to 9±1 Ma, but changed by less than 2 per cent since 8 Ma and even less since 4.2 Ma. The rotations further suggest that the relative plate direction has rotated clockwise for most of the past 20 Myr, with a possible hiatus from 9 to 5 Ma. This conflicts with previously reported evidence for a significant clockwise change in the plate direction at 8–6 Ma. Our new rotations indicate that Pacific plate motion became obliquely convergent with respect to the San Andreas Fault of central California at 5.2–4.2 Ma, in agreement with geological evidence for a Pliocene onset of folding and faulting in central California. Our reconstruction of the northern Gulf of California at 6.3 Ma differs by only 15–30 km from structurally derived reconstructions after including 3–4 km Myr –1 of geodetically measured slip between the Baja California Peninsula and Pacific plate. This implies an approximate 15–30 km upper bound for plate non-rigidity integrated around the global circuit at 6.3 Ma. A much larger 200±54 km discrepancy between our reconstruction of the northern Gulf of California at 12 Ma and that estimated from structural and marine geophysical observations suggests that faults in northwestern Mexico or possibly west of the Baja California Peninsula accommodated large amounts of obliquely divergent dextral shear from 12–6.3 Ma. Pacific–North America plate motion since 16 Myr estimated with our new rotations agrees well with structurally summed deformation along two transects of western North America between the Colorado Plateau and western California, with a difference as small as 40 km out of 760 km of margin-parallel motion. A strong resemblance between a 20-Myr-to-present flow line reconstructed with our new rotations and the traces of the 700-km-long Queen Charlotte Fault and continental slope west of Canada suggests that the plate margin geometry was influenced by the passage of the Pacific plate and Yakutat block. The new rotations also suggest that (1) oblique convergence west of Canada initiated at 12–11 Ma, 5–8 Myr earlier than previously estimated, (2) no significant margin-normal shortening has occurred in areas of Canada located east of the Haida Gwaii archipelago since 20 Ma and (3) Pacific plate underthrusting of Haida Gwaii has accommodated the margin-normal component of plate motion since 12–11 Ma. Our rotations suggest an 70 per cent increase in the rate that the Pacific plate has been consumed by subduction beneath the Aleutian arc since 19.7 Ma, with still-unknown consequences for the rate of arc magmatism.

Description: A composite transposon is a mobile genetic element consisting of two insertion sequences (ISs) flanking a segment of cargo DNA often containing antibiotic resistance (AR) genes. Composite transposons can move as a discreet unit. There have been recently several reports on a novel mechanism of movement of an IS 26 -based composite transposon through the formation of a translocatable unit (TU), carrying the internal DNA segment of a composite transposon and one copy of a flanking IS. In this study, we determined the presence of composite transposons and TUs in human oral metagenomic DNA using PCR primers from common IS elements. Analysis of resulting amplicons showed four different IS 1216 composite transposons and one IS 257 composite transposon in our metagenomic sample. As our PCR strategy would also detect TUs, PCR was carried out to detect circular TUs predicted to originate from these composite transposons. We confirmed the presence of two novel TUs, one containing an experimentally proven antiseptic resistance gene and another containing a putative universal stress response protein (UspA) encoding gene. This is the first report of a PCR strategy to amplify the DNA segment on composite transposons and TUs in metagenomic DNA. This can be used to identify AR genes associated with a variety of mobile genetic elements from metagenomes.

Description: Carbonyl sulfide (COS) is an atmospheric trace gas and one of the sources of stratospheric aerosol contributing to climate change. Although one of the major sinks of COS is soil, the distribution of COS degradation ability among bacteria remains unclear. Seventeen out of 20 named bacteria belonging to Actinomycetales had COS degradation activity at mole fractions of 30 parts per million by volume (ppmv) COS. Dietzia maris NBRC 15801 T and Mycobacterium sp. THI405 had the activity comparable to a chemolithoautotroph Thiobacillus thioparus THI115 that degrade COS by COS hydrolase for energy production. Among 12 bacteria manifesting rapid degradation at 30 ppmv COS, D. maris NBRC 15801 T and Streptomyces ambofaciens NBRC 12836 T degraded ambient COS (~500 parts per trillion by volume). Geodermatophilus obscurus NBRC 13315 T and Amycolatopsis orientalis NBRC 12806 T increased COS concentrations. Moreover, six of eight COS-degrading bacteria isolated from soils had partial nucleotide sequences similar to that of the gene encoding clade D of β-class carbonic anhydrase, which included COS hydrolase. These results indicate the potential importance of Actinomycetes in the role of soils as sinks of atmospheric COS.

Description: Described are results of laboratory experiments which revealed regularities of gradual transition from stick-slip mode to aseismic creep. The behaviour of model gouge-filled fault was investigated with experimental setup of the spring-bock model. It was experimentally proven that small variations of a percentage of materials with velocity strengthening and velocity weakening properties in the fault principal slip zone may result in significant variation of the portion of seismic energy radiated during a fault slip event. The tests simulated different modes of interblock sliding whose characteristic values of scaled kinetic energy varied by several orders of magnitude, while differences in contact strength and shear stress drop remained relatively small. The obtained results led to the conclusion that the earthquake radiation efficiency and the fault slip mode are governed by the ratio of two parameters—maximum fault slip-weakening rate and shear stiffness of the enclosing massif. The ratio can be essentially changed by small variations of the material composition of the fault principal slip zone.

Description: Among the outstanding tectonic questions regarding the convergence between the Tien Shan and Tarim basin in northwestern China are the manner in which deformation is accommodated within their lithospheres, and the extent that the Tarim lithosphere underthrusts the Tien Shan. In particular, the amount and type of deformation within the Tarim basin is poorly understood. It is also uncertain if the convergence between the Tarim and the Tien Shan takes place mainly along a discrete boundary, or if the Tarim lithosphere simply indents into the Kazach shield, forming the Tien Shan through crustal thickening accommodated by a distributed series of thrust faults. In this study we use hypocentres from published earthquake catalogues and waveforms recorded by regional seismic networks to determine earthquake source parameters through regional centroid moment tensor inversion. The entire dataset consists of 160 earthquakes that occurred between 1969 and 2009 and with moment magnitudes between 3.5 and 7 distributed throughout the central Tien Shan and northwestern Tarim Basin. The estimated focal depths of these earthquakes range from the near-surface to about 44 km. Focal mechanisms throughout much of the Tien Shan indicate active deformation accommodated by thrust faults from at least the upper crust to 30 km depth. South of the Tien Shan, the Jia-shi earthquake sequence within the Tarim basin suggests that both crustal shortening and localized flexure are part of a complicated process involving rotational convergence. Inside the Tarim basin, two earthquakes with thrust faulting mechanisms near the crust–mantle boundary beneath the Bachu uplift imply a brittle rheology of the lower crust. High-angle thrust events occur broadly across the Tien Shan, suggesting that the Tarim lithosphere as a whole is strong and indents into the Kazach shield to create the mountain range.

Description: The subduction of lithospheric plates is partitioned between subducting plate motion and lateral slab migration (i.e. trench retreat and advance). We use 3-D, dynamic models of subduction to address the role of a power-law mantle viscosity on subduction dynamics and, in particular, rates of trench retreat. For all numerical models tested, we find that a power-law rheology results in reduced rates of trench retreat, and elevated slab dip angles, relative to the equivalent isoviscous mantle model. We analyse the asthenospheric pressure distribution and the style of mantle flow, which exhibits only limited variability as a function of mantle rheology, in order to compute estimates of the mantle forces associated with subduction. The inclusion of a power-law rheology reduces the mantle shear force (which resists subducting plate motion) to a greater degree than it reduces the dynamic pressure gradient across the slab (which resists trench retreat). Therefore, the inclusion of a power-law mantle rheology favours a shift towards a subduction mode with a reduced trench retreat component, typically a relative reduction of order 25 per cent in our 3-D models. We suggest that this mechanism may be of importance for reducing the high trench retreat rates observed in many previous models to levels more in line with the average subduction partitioning observed on Earth at present (i.e. trench velocity ≤ plate velocity), for most absolute plate motion reference frames.

Description: Pulverized rocks (PR) are extremely incohesive and highly fractured rocks found within the damage zones of several large strike-slip faults around the world. They maintain their crystal structure, show little evidence of shearing or chemical alteration, and are believed to be produced by strong tensile forces. Several mechanisms for pulverization have been proposed based on simple qualitative analyses or laboratory experiments under simplified loading conditions. Numerical modelling, however, can offer new insights into what is needed to produce PR and likely conditions of formation. We perform dynamic rupture simulations of different earthquakes, varying the magnitude, the slip distribution, and the rupture speed (supershear and subshear), while measuring the stresses produced away from the fault. To contextualize our results, a basic threshold of 10 MPa is set as the tensile strength of the rock mass and recordings are made of where, when, and by how much this threshold is exceeded for each earthquake type. Guided by field observations, we discern that a large (〉 M w 7.1) subshear earthquake along a bimaterial fault produces a pulverized rock distribution most consistent with observations. The damage is asymmetric with the majority on the stiffer side of the fault extending out for several hundred metres. Within this zone there is a large and sudden volumetric expansion in all directions as the rupture passes. We propose that such an extreme tensile stress state, repeated for every earthquake, eventually produces the PR seen in the field.

Description: Kinematics of divergent boundaries and Rift-Rift-Rift junctions are classically studied using long-term geodetic observations. Since significant magma-related displacements are expected, short-term deformation provides important constraints on the crustal mechanisms involved both in active rifting and in transfer of extensional deformation between spreading axes. Using InSAR and GPS data, we analyse the surface deformation in the whole Central Afar region in detail, focusing on both the extensional deformation across the Quaternary magmato-tectonic rift segments, and on the zones of deformation transfer between active segments and spreading axes. The largest deformation occurs across the two recently activated Asal-Ghoubbet (AG) and Manda Hararo-Dabbahu (MH-D) magmato-tectonic segments with very high strain rates, whereas the other Quaternary active segments do not concentrate any large strain, suggesting that these rifts are either sealed during interdyking periods or not mature enough to remain a plate boundary. Outside of these segments, the GPS horizontal velocity field shows a regular gradient following a clockwise rotation of the displacements from the Southeast to the East of Afar, with respect to Nubia. Very few shallow creeping structures can be identified as well in the InSAR data. However, using these data together with the strain rate tensor and the rotations rates deduced from GPS baselines, the present-day strain field over Central Afar is consistent with the main tectonic structures, and therefore with the long-term deformation. We investigate the current kinematics of the triple junction included in our GPS data set by building simple block models. The deformation in Central Afar can be described by adding a central microblock evolving separately from the three surrounding plates. In this model, the northern block boundary corresponds to a deep EW-trending trans-tensional dislocation, locked from the surface to 10–13 km and joining at depth the active spreading axes of the Red Sea and the Aden Ridge, from AG to MH-D rift segments. Over the long-term, this plate configuration could explain the presence of the en-échelon magmatic basins and subrifts. However, the transient behaviour of the spreading axes implies that the deformation in Central Afar evolves depending on the availability of magma supply within the well-established segments.

Description: Volcanic crises are often preceded and accompanied by volcano deformation caused by magmatic and hydrothermal processes. Fast and efficient model identification and parameter estimation techniques for various sources of deformation are crucial for process understanding, volcano hazard assessment and early warning purposes. As a simple model that can be a basis for rapid inversion techniques, we present a compound dislocation model (CDM) that is composed of three mutually orthogonal rectangular dislocations (RDs). We present new RD solutions, which are free of artefact singularities and that also possess full rotational degrees of freedom. The CDM can represent both planar intrusions in the near field and volumetric sources of inflation and deflation in the far field. Therefore, this source model can be applied to shallow dikes and sills, as well as to deep planar and equidimensional sources of any geometry, including oblate, prolate and other triaxial ellipsoidal shapes. In either case the sources may possess any arbitrary orientation in space. After systematically evaluating the CDM, we apply it to the co-eruptive displacements of the 2015 Calbuco eruption observed by the Sentinel-1A satellite in both ascending and descending orbits. The results show that the deformation source is a deflating vertical lens-shaped source at an approximate depth of 8 km centred beneath Calbuco volcano. The parameters of the optimal source model clearly show that it is significantly different from an isotropic point source or a single dislocation model. The Calbuco example reflects the convenience of using the CDM for a rapid interpretation of deformation data.

Description: Neonicotinoids are neurotoxic systemic insecticides used in plant protection worldwide. Unfortunately, application of neonicotinoids affects both beneficial and target insects indiscriminately. Being water soluble and persistent, these pesticides are capable of disrupting both food chains and biogeochemical cycles. This review focuses on the biodegradation of neonicotinoids in soil and water systems by the bacterial community. Several bacterial strains have been isolated and identified as capable of transforming neonicotinoids in the presence of an additional carbon source. Environmental parameters have been established for accelerated transformation in some of these strains. Studies have also indicated that enhanced biotransformation of these pesticides can be accomplished by mixed microbial populations under optimised environmental conditions. Substantial research into the identification of neonicotinoid-mineralising bacterial strains and identification of the genes and enzymes responsible for neonicotinoid degradation is still required to complete the understanding of microbial biodegradation pathways, and advance bioremediation efforts.