ALBERT

Description: A number of planetary objects exhibit large radar reflectivity and polarization ratios, and more recently, a similar behavior has been observed over a vast portion of the Earth's surface: the percolation facies of the Greenland Ice Sheet. Surface-based ranging radar data and snow stratigraphy studies demonstrated that the radar properties of that portion of Greenland are caused by enhanced scattering from massive, large, solid-ice bodies buried in the top few meters of the dry, cold, clean snowy surface of the ice sheet and created by seasonal melting and refreezing events. Here, we model the icy inclusions as randomly oriented, discrete, noninteracting, dielectric cylinders embedded in a transparent snow medium. An exact analytical solution is used to compute the scattered field from the cylinders. Using this model, we correctly predict the polarimetric radar observations gathered by an airborne imaging system at three wavelengths (5.6, 24, and 68 cm), between 19 deg and 65 deg incidence angle. The diameter and number density of the cylinders that are inferred from the radar data using the model are consistent with in situ observations of the icy inclusions. The large radar reflectivity and polarization ratios are interpreted as arising internal reflections of the radar signals in the icy inclusions that first-order external reflection models fail to predict. The results compare favorably with predictions from the coherent backscatter or weak localization theory and may provide a complementary framework for interpreting exotic radar echoes from other planetary objects.

Description: Synthetic-aperture radar (SAR) interferograms produced from ESA's ERS-1 satellite, provide the first synoptic view of ice flow dynamics of the western sector of the Greenland Ice Sheet. Glacial motion is detected in the radar ranging direction at millimetric scales, across a complete sequence of snow accumulation and melting regimes, despite significant varations in their radar scattering properties. Ice flow evolves from a slow, regular motion at the higher elevations. At lower elevations, motion is strongly convoluted by meter-scale undulations in surface topography, which have a unique interferometric signature that enables a novel approach for retrieving flow direction. Inferred flow directions, combined with surface displacements in the radar ranging direction, yield ice velocity estimates that are within 6% of in-situ measurements gathered along a 40 km survey line. Application of repeat-pass SAR interferometry to the entire Greenland Ice Sheet should enable precise mapping of its ice flow dynamics at an unprecedented level of spatial detail.

Description: We present interferometric observations of ice-sheet motion in western Greenland based on pairs of ERS-1 synthetic aperture radar (SAR) images. These observations provide the first detailed regional view of ice motion associated with dynamically supported topography near the margin of an ice sheet. The interferograms of this area are much more complicated than other interferograms of ice sheets presented to date. We devote the largest part of this paper to explaining the source of the complexity in these interferograms. A synthetic interferogram based on a simple model helps to illustrate the effects of different components of the ice velocity field in interferometric data and suggests a method for estimating the large-scale ice velocity field from such data.

Description: With the launch of LANDSAT-1 in July 1972, and the follow-on launch of LANDSAT-2 in January of this year, routine availability of satellite imagery and electronic data of the earth's resources has become a reality. Federal data centers provide LANDSAT data to resource managers and the general public. These data centers have to date provided almost 500,000 frames of LANDSAT data at a cost of more than $2,000,000. Data from the LANDSAT satellite program, along with data and information from the Skylab manned program, are available over any location to anyone for the cost of reproduction.

Description: Aerial photographs of the entire state were used to develop information on geomorphic regions, land ownership, forest cover, soils, geology, land classification and land capability. LANDSAT imagery was included to update many photomaps for land use classification and urban development planning.

Description: Joint Federal/State remote data sensing centers are advocated to help survey Alaska for land use planning by aerial photography and LANDSAT imagery. The centers are to provide satellite derived information in land use planning and offshore oil developments.

Description: The experience of the Ohio-Kentucky-Indiana Regional Council of Governments in its development of a regional land use inventory from computer processing of LANDSAT 1 digital tapes and the use of those data in the OKI water quality planning program are discussed. A major part of the planning program is the prediction of water quality in rivers and lakes resulting from existing and future land uses. A model has been developed that can predict the flow of sediment, total phosphorus, total nitrogen, and organic wastes into major streams. An essential input to this model is an accurate map of land use derived from LANDSAT 1 digital tapes.

Description: Registration of remotely sensed data to geodetic coordinates provides for overlay analysis of land use data. For aerial photographs of a large area, differences in scales, dates, and film types are reconciled, and multispectral scanner data are machine registered at the time of acquisition.

Description: Aerial and fixed platform oil spill detection systems primarily utilize remote sensors for data acquisition and pollution monitoring purposes. In addition to aerial photography and infrared reflectance sensors, a laser backscatter sensor and an ultraviolet fluorescence sensor are considered for application in pollution surveillance systems.

Description: It is shown that remotely sensed data, whether in digital or imagery form, provide objective, systematic measurements of coastal zone characteristics when compared with traditional measurement techniques. An example is given for Alabama shoreline parameters using LANDSAT 1 composite mapping.

Description: Satellite gathered remote sensor data were used to update a basic environmental atlas of southern Louisiana to reflect recent dynamic geological changes, such as erosion by wave action along the coast and active delta building in the lower part of the Mississippi Basin. Standard pattern recognition programs were utilized to update LANDSAT pictures for three categories (generalized land use, ecological zones and vegetation) to obtain a simulated color photomap for LANDSAT frames for further rectification by a table lookup program.

Description: The primary objectives of the earth observations and photography experiment of the Apollo Soyuz Test Project were to photograph various terrestrial structures and to use the capabilities of man as a trained observer in visually studying earth features and phenomena. Man's special capabilities include the sensitivity of the eye to subtle color variations and the speed with which the eye/brain system can interpret what is seen and select targets for photography. Real time astronaut observations constitute a useful complement to orbital photographs and greatly aid in their interpretation. Targets for mapping and hand held photography were selected on the basis of their value to specialists in the earth sciences including geology, oceanography, desert study, hydrology, meteorology, and environmental science.

Description: A statewide computerized land use mapping system is reported that uses polygons to identify inventories from aerial photography by employing the USGS classification system. In addition, the system provides soil, population, and housing census data as well as economic indicators that can be useful in relating to the overall system.

Description: Orthophotoquads prepared from high altitude photography and LANDSAT imagery were utilized for land use mapping and urban development planning. LANDSAT imagery of rough terrains were evaluated by photographic projection on a viewer screen for enlargement of details.

Description: Remote panchromatic imagery was applied to develop a coastal zone management atlas that provides for land cover or vegetation surveys as well as land use stereographic mapping for regional planning purposes.

Description: A computer derived land use classification scheme for infrared LANDSAT imagery was developed and applied to update existing Mississippi coastline data. Inventory classifications were accomplished by photographic enlargement and photointerpretations showing color coded resources on the ground.

Description: Land use maps were developed from photomaps obtained by remote sensing in order to develop a comprehensive state plan for the protection, development, and zoning of coastal regions. Only photographic remote sensors have been used in support of the coastal council's planning/management methodology. Standard photointerpretation and cartographic application procedures for map compilation were used in preparing base maps.

Description: During the oceanic period from July to November, the southward flowing California current dominates the nearshore current patterns. Commencing about the middle of November and extending to mid-February, the Davidson current, a northward moving countercurrent, is the dominant inshore transporter of water and suspensates. The phenomenon of upwelling is prevalent during the period from the middle of February to the end of July. Thus, every year along the coast of California, there are three successive current seasons: the oceanic, the Davidson, and the upwelling. This paper is a discussion of the nature of these nearshore currents. In addition, the capabilities of various remote sensing platforms and systems for providing methods of monitoring the coastal processes associated with the current seasons of California are demonstrated herein.

Description: Digital data from the infrared LANDSAT imagery were used to classify eutrophication levels of lakes in an effort to observe the effect of thermal discharges from power stations. LANDSAT data were also applied to identify and monitor wetlands, for soil surveys, sedimentation transport, and in general to assist in land use planning and resources management.

Description: Digital processing of multispectral LANDSAT data was used to develop a computerized model for predicting oil slick movement within the Delaware Bay. LANDSAT imagery was also used to monitor offshore waste disposal sites for mapping of wetlands, and charting of tidal currents.

Description: Remote sensing techniques provide important information for land and water use planning organizations in order to assess coastal developments and their impact on water resources, sediment transport, erosion, and marine biology. Political expediency requires pertinent data acquisition and data dissemination to local populations for coastal zone management decision making.

Description: The operational feasibility of using remote sensing to provide all weather ice formation for Great Lakes winter navigation is explored. A combination airborne pulsed radar system to measure actual ice thickness, a satellite data link system, and a hand drawn interpretive ice chart proved valuable for extending winter navigation through the icepack.

Description: Different types of satellite and conventional remote sensing data are used to monitor urban growth and the pattern of development. Software programs were developed for a growth allocation model that uses LANDSAT information as the basic component.

Description: The earth resources remote sensing activity of Texas and its applications are reported. A combination of digital, photographic, and traditional methods is being used to manage the water impoundments inventory, a land use survey, a wildlife habitat survey, and a coastal zone survey.

Description: Jet Propulsion Laboratory Deep Space Station (DSS) location solutions based on two JPL planetary ephemerides, DE 84 and DE 96, at eight planetary encounters were used to obtain weighted least squares estimates of precession and polar motion errors. The solution for precession error in right ascension yields a value of 0.3 X 10 to the minus 5 power plus or minus 0.8 X 10 to the minus 6 power deg/year. This maps to a right ascension error of 1.3 X 10 to the minus 5 power plus or minus 0.4 X 10 to the minus 5 power deg at the first Voyager 1979 Jupiter encounter if the current JPL DSS location set is used. Solutions for precession and polar motion using station locations based on DE 84 agree well with the solution using station locations referenced to DE 96. The precession solution removes the apparent drift in station longitude and spin axis distance estimates, while the encounter polar motion solutions consistently decrease the scatter in station spin axis distance estimates.

Description: Information is provided on how a potential user of remote sensing technology can gain access to all of the products and services he will need to get started. It was envisioned that these include data, training, hardware, and software. A very brief tutorial summary of the fundamentals of the technology is presented.

Description: The current land use map for the city of Los Angeles was developed by the guesstimation process and provides single stage information for each level in the critical geographical hierarchy for land use planning management. Processing and incorporation of LANDSAT data in the land use information system requires special funding; however, computergraphic maps are able to provide a viable information system for city planning and management.

Description: Various aspects of the technology which are available to users now are described. Specific topics discussed include: data distribution: availability of and access to data; technology transfer: system use illustrations and availability of training; hardware systems descriptions: processing hardware constructed and available; data processing techniques: individual processing techniques; and future developments: a sampling of future technology.

Description: Crop-weather models developed for wheat from an assembled base of approximately 45 years of climatic records and historic wheat yield and production data at the stratum level are described. Utilization of meteorological data acquired by the NOAA satellites is discussed.

Description: The remote sensing activities of the Department of Interior are summarized. The use of satellite imagery in land and water management is described. Specific topics discussed include: land use mapping, exploration and discovery of metal, oil, and gas deposits, location of geological faults, and repetitive monitoring of dynamic environmental phenomena related to water resources.

Description: The lack of adequate institutional mechanisms to regulate, monitor and govern the use of commonly owned world resources appears to be politically destabilizing and subject to socioeconomic pressures of overpopulation, food shortages, cartelism, terrorism, and wealth distribution to developing countries. The capacity and propensity to wage war and its potential consequences are elaborated. It is shown that technology is one of the dominant factors affecting the exploration and management of commonly shared resources.

Description: ERTS images were compared to surficial geologic maps, prepared through traditional field studies. Lithologic boundaries, bedrock outcrops, bedrock structures, and geomorphologic features were examined. An area southeast of the Twin Cities, located chiefly in northern Dakota County was studied, as well as the New Brighton 15-minute quadrangle located in portions of Ramsey and Anoka Counties. Visual comparison of geologic maps and ERTS imagery demonstrated the limitations of this approach to geological investigations. Bedrock outcrops and bedrock structure in the metropolitan area do not appear on ERTS imagery. However, certain glacial sediments can be identified and are potentially mappable. Certain geomorphological features were also discernable.

Description: Development of low lying southeastern shore of Pike Lake is described as part of the Rice Creek watershed study. Several small wetlands in Arden Hills, Minnesota were incorporated into the drainage plans as pollutant and nutrient sinks rather than being infilled. Lake water quality in the St. Paul-Minneapolis metropolitan area was analyzed using Landsat images. In the same urban area, the inventory and seasonal change of the open water were also studied.

Description: Experiments carried out on an Avondale loam soil indicated that the thermal inertia concept of soil water content detection is reasonably sound. The volumetric water contents of surface soil layers between 2 and 4 cm thick were found to be linear functions of the amplitude of the diurnal surface soil temperature wave for clear day-night periods. They were also found to be linear functions of the daily maximum value of the surface soil-air-temperature differential. Tests on three additional soils ranging from sandy loam to clay indicated that the relations determined for Avondale loam could not be accurately applied to these other soil types. When the moisture characteristic curves of each soil were used to transform water contents into pressure potentials, however, it was found that soil water pressure potential could be determined without prior knowledge of soil type, and thus its value as a potential soil water status survey tool was significantly enhanced.

Description: The Delta Classifier defined as an agricultural crop classification scheme employing a temporal trend procedure is applied to more than 100 different Landsat data sets collected during the 1974-1975 growing season throughout the major wheat-producing regions of the United States. The classification approach stresses examination of temporal trends of the Landsat mean vectors of crops in the absence of corresponding ground truth information. It is shown that the resulting classifications compare favorably to ground truth estimates for wheat proportion in those cases where ground truth is available, and that the temporal trend procedure yields estimates of the wheat proportion that are comparable to the best results from maximum likelihood classification with photointerpreter-defined training fields.

Description: This paper covers the topic of marine geodesy, its goals, and applications. Specifically discussed are position determination and establishment of geodetic control on the ocean bottom, ocean surface, and subsurface, and the determination of the geoid, a vertical reference surface. The various techniques used in position determination (including satellite, airborne, radio, inertial and acoustic techniques) are assessed in terms of accuracy, coverage, and contribution to the solution of specific problems associated with position and control. The results of several marine geodetic control experiments are presented. Classical techniques for the determination of the geoid are discussed and assessed, as are new techniques such as satellite altimetry. The outlook for marine geodetic measurements in the ocean is outlined in terms of what is being planned or considered for the next decade, and several recommendations are made.

Description: A rectangular (7 x 14 km) area 40 km S of Madrid was remote-sensed with a three-stage recognition process. Ground truth was established in the first phase, airborne sensing with a multispectral scanner and photographic cameras were used in the second phase, and Landsat satellite data were obtained in the third phase. Agronomic and hydrological photointerpretation problems are discussed. Color, black/white, and labeled areas are displayed for crop recognition in the land-use survey; turbidity, concentrations of pollutants and natural chemicals, and densitometry of the water are considered in the evaluation of water resources.

Description: Recent analysis of laser data for determining variation of latitude have been based on apparent variations in the orbital inclination of the satellite derived from short orbital arcs of 6-8 hours. An alternative method, based on the daily adjustment of the station position to a much longer arc of 2 or 3 weeks has recently been developed and tested. In the new method a long orbital arc is derived from many days of data and is subsequently used as a reference orbit for the adjustment of the position of the station (only) on each day of the long arc for which tracking data are available. This new technique appears to give slightly better results when it is applied to a test period in August 1970, with the added advantage that earth rotation measurements can be derived from the same data at the same time. The results for the test period indicate a precision of 74 cm in variation of latitude and 0.81 ms in monitoring the earth's rotation with 6 hours of data.

Description: Previously developed programs for computing atmospheric transmission and scattering of the solar radiation are used to compute the ratios of the earth-atmosphere system (space) directional reflectivities in the nadir direction to the surface Lambertian reflectivity, for the four bands of the Landsat multispectral scanner (MSS). These ratios are presented as graphs for two water vapor levels, as a function of the surface reflectivity, for various sun elevation angles. Space directional reflectivities in the vertical direction are reported for selected arid regions in Asia, Africa, and Central America from the spectral radiance levels measured by the Landsat MSS. From these space reflectivities, surface reflectivities are computed applying the pertinent graphs. These surface reflectivities are used to estimate the surface albedo for the entire solar spectrum. The estimated albedos are in the range 0.34-0.52, higher than the values reported by most previous researchers from space measurements, but are consistent with laboratory and in situ measurements.

Description: Remote sensing of the earth from satellite systems such as Landsat, Nimbus, and Skylab has demonstrated the potential influence of such observations on a number of major human concerns. These concerns include the management of food, water and fiber resources, the exploration and management of mineral and energy resources, the protection of the environment, the protection of life and property, and improvements in shipping and navigation.

Description: An uncontrolled aerial thermographic mosaic of Yellowstone National Park was assembled from the videotape record of 13 individual thermographs obtained with linescan radiometers. Post mission processing of the videotape record rectified the nadir line to a topographic map base, corrected for v/h variations in adjacent flight lanes, corrected for yaw and pitch distortions, and distortions produced by nonlinearity of the side-wise scan. One of the purposes of the thermographic study was to delineate the areas of thermal emission (hot springs, geysers, etc.) throughout the Park, a study which could have great value in reconnaissance surveys of geothermal areas in remote regions or regions of high relief.

Description: Landsat 1 measurements of nadir radiance are used to obtain the mass of particulates in a vertical column of dust from the Sahara Desert. A radiative transfer model, constructed with knowledge of a few values of optical parameters measured from a ship, is developed to account for the measured radiance values. Measurement and model accuracies are discussed. It is found that the mass of particulates with smaller than a 10 micron radius in a vertical column is 1.6 g/sq m.

Description: A brief review of remote sensing state-of-the-art is presented. Emphasis is placed on an understanding of remote sensing terminology. Passive and active sensors and sensor platforms from the spacecraft program to the ground truth program are described.

Description: Black-and-white stereoscopic aerial photographs at a scale of 1:20,000, 1:40,000, and 1:65,000 and controlled aerial photo mosaics at a scale of 1:24,000 were the basic data utilized for most mapping. Color and color infrared aerial photography (1:20,000) was employed to man the barrier islands, and color infrared photography (1:120,000) was used to map sand and mud units of the coastal plain north of Houston. LANDSAT-1 imagery in Bands 4, 5, and 7 (1:250,000) was utilized to examine land use and certain resource units statewide. Side scanning radar and LANDSAT imagery were studied experimentally toward mapping land suitability units in carbonate terranes with high relief and certain other terranes. Large-scale color and color infrared aerial stereoscopic photographs supply the most information for regional mapping. black-and-white photography is the most practical data for mapping because of scale, complete coverage, availability, and relatively low cost.

Description: Computer processing of MSS data to identify and map citrus trees affected by young tree decline is analyzed. The data were obtained at 1500-feet altitude in six discrete spectral bands covering regions from 0.53 to 1.3 millimicrons as well as from instrumental ground truths of tree crowns. Measurable spectral reflectance intensity differences are observed in the leaves of healthy and diseased trees, especially at wavelengths of 500 to 600 nm and 700 to 800 nm. The overall accuracy of the method is found to be 89%.

Description: The environmental satellites NOAA-2 and ERTS-1 observed flooding in United States' rivers such as the Mississippi during 1973. Combination of NOAA-2 observation frequency and the ERTS-1 resolution provides an adequate satellite system for monitoring floods. Several polar-orbiting satellites of the ERTS type could view flooded areas at a reasonably high resolution every three to five days. A high-resolution earth-synchronous satellite would further enhance flood mapping by providing observations whenever clouds are absent.

Description: The development of the Earth Resources Technology Satellites for making earth observations from space is discussed. The programmatic elements of the ERTS program are defined. The specific results of the program which are considered are as follows: (1) analysis of snowmelt runoff, (2) analysis of Mississippi River floods of 1973, (3) global ice surveys with an electrically scanning microwave radiometer, (4) the microwave signature of snow fields, (5) analysis of strip mining activities, (6) sea surface studies using microwave techniques during the Bering Sea experiment, (7) cloud types and measurement of rainfall, and (8) performance of various remote sensors.

Description: The proposed ERTS-DCS system is designed to allow EPA the capability to evaluate, through demonstrable hardware, the effectiveness of automated data collection techniques. The total effectiveness of any system is dependent upon many factors which include equipment cost, installation, maintainability, logistic support, growth potential, flexibility and failure rate. This can best be accomplished by installing the system at an operational environmental control agency (CAMP station) to insure that valid data is being obtained and processed. Consequently, it is imperative that the equipment interface must not compromise the validity of the sensor data nor should the experimental system effect the present operations of the CAMP station. Since both the system which is presently in use and the automatic system would be in operation in parallel, conformation and comparison are readily obtained.

Description: Interior Department plans for the utilization of data collection systems such as the one on ERTS-1 and others scheduled for future use are very briefly discussed. The savings offerred in manpower, acquisition and dissemination of useful data, and the operational potential of data collection systems are described.

Description: Service programs in NOAA that contemplate using the Geostationary Operational Environmental Satellite (GEOS) Data Collection System (DCS) are considered. The GEOS DCS will be operated by the National Environmental Satellite Service of NOAA as an integral part of the national operation environmental satellite program. This plan is concerned with that part of the GEOS program connected with collection and relay of data from remote locations. Service programs include: (1) hydrological data collection; (2) oceanographic data collection; (3) marine observations from data buoys; (4) Tsunami warning service; and (5) meteorological service.

Description: Plans by the Corps of Engineers to utilize data collection systems to support their mission of development, utilization, and conservation of the water resources of the Nation, flood control, water management, hydroelectric power, maintenance of navigable waterways, reservoir construction, and river basin control are briefly addressed.

Description: Geographically, applications were made over nearly the entire area where direct readout could be accomplished using the data acquisition stations in the ERTS-1 system. The extreme areas included Iceland, the Canadian Arctic, Alaska, Hawaii and Central America. In the discipline sense the majority of applications were in the water resources area with other applications being formally and informally reported in meteorology, oceanography, volcano surveillance and forestry. Installation and maintenance of the data collection platforms, as is true with nearly all new systems, was not accomplished without difficulty. On the whole, however, it has gone well enough so that it is agreed that it is a system which is amenable to installation in a variety of physical situations and the installation is accomplished with an ease commensurate with eventual use in an operational system.

Description: Significant progress has been achieved in simplifying platform concepts through random access techniques. This is particularly important in applications such as balloons where weight is critical. In applications, where weight restriction may not be a problem, the concept lends itself to uncomplicated designs and low cost. Nevertheless, ordered systems offer inherent advantages in managing data flow which justifies their use. With continuing improvements in technology, particularly low power receivers, ordered systems should become quite competitive with random systems for many applications.

Description: The Data Collection System flown on the first Earth Resources Technology Satellite (ERTS-1) relays earth resources data from remotely located in-situ sensors to Goddard Space Flight Center. Data is received at Goddard at least twice each day from every sensor installation and is distributed to users (who operate the sensors and transmitters) by mail and teletype. The system consists of a data formatting and transmitting unit, called the Data Collection Platform (DCP), a receiver and a retransmitter aboard ERTS-1; and receiving, demodulating and decoding equipment located at the Goldstone, California and Goddard data acquisition stations. Data is transmitted from the data acquisition stations to the ERTS Control Center at Goddard, then to the NASA (ERTS) Data Processing Facility (NDPF) where it is processed and distributed to users. Experience to date indicates that the design of the ERTS-1 Data Collection System is adequate for operational use for 50% of the users and, with minor modifications, could meet the requirements of 75%. Some users will have to augment the system by other data collection techniques to meet their operational requirements.

Description: An airborne DCP Data Aquisition System has been designed to augment the ERTS satellite data recovery system. The DCP's are data collection platforms located at pertinent sites. With the appropriate sensors they are able to collect, digitally encode and transmit environmental parameters to the ERTS satellite. The satellite in turn relays these transmissions to a ground station for processing. The satellite is available for such relay duty a minimum of two times in a 24-hour period. The equipment is to obtain continuous DCP data during periods of unusual environmental activity--storms, floods, etc. Two circumstances contributed to the decision to design such a system; (1) Wallops Station utilizes surveillance aircraft in support of rocket launches and also in support of earth resources activities; (2) the area in which Wallops is located, the Delaware and Chesapeake Bay areas, are fertile areas for DCP usage. Therefore, by developing an airborne DCP receiving station and installing it on aircraft more continuous DCP data can be provided from sites in the surrounding areas at relatively low cost.

Description: Wallops Station accepted the tasks of providing ground truth to several ERTS investigators, operating a DCP repair depot, designing and building an airborne DCP Data Acquisition System, and providing aircraft underflight support for several other investigators. Additionally, the data bank is generally available for use by ERTS and other investigators that have a scientific interest in data pertaining to the Chesapeake Bay area. Working with DCS has provided a means of evaluating the system as a data collection device possibly applicable to ongoing Earth Resources Program activities in the Chesapeake Bay area as well as providing useful data and services to other ERTS investigators. The two areas of technical support provided by Wallops, ground truth stations and repair for DCPs, are briefly discussed.

Description: A prototype volcano surveillance system has been installed on 15 volcanoes in four states and four countries. The need for this system, the techniques used, the method of implementation, the major problems, the results, and the future seen for such a system are briefly reviewed.

Description: The objective of the technical support effort is to provide hardware and data processing support to DCS users so that application of the system may be simply and effectively implemented. Technical support at Mississippi Test Facility (MTF) is concerned primarily with on-site hardware. The first objective of the DCP hardware support was to assure that standard measuring apparatus and techniques used by the USGS could be adapted to the DCS. The second objective was to try to standardize the miscellaneous variety of parameters into a standard instrument set. The third objective was to provide the necessary accessories to simplify the use and complement the capabilities of the DCP. The standard USGS sites have been interfaced and are presently operating. These sites are stream gauge, ground water level and line operated quality of water. Evapotranspiration, meteorological and battery operated quality of water sites are planned for near future DCP operation. Three accessories which are under test or development are the Chu antenna, solar power supply and add-on memory. The DCP has proven to be relatively easy to interface with many monitors. The large antenna is awkward to install and transport. The DCS has met the original requirements well; it has and is proving that an operation, satellite-based data collection system is feasible.

Description: The ERTS-1 experimental hydrologic Data Collection Platform System that has been established at the New England Division (NED), the reasons for getting involved with the experiment, some of the initial problems associated with the data collection hardware, and a preliminary conclusion based on operating experiences are reviewed. The New England Region includes the states of Maine, New Hampshire, Vermont, Massachusetts, Rhode Island and Connecticut. The entire area consists of approximately 97,000 sq. km. (60,000 square miles), half of which is in the state of Maine. The limits of the NED are all of Maine, New Hampshire and Vermont to the western limits of the Connecticut River basin, Massachusetts, Connecticut to the western edge of the Housatonic River basin and Rhode Island. All reservoirs have flood control as a primary purpose. Other uses include water supply, recreation and low flow augmentation. However, none of the reservoirs are presently operated for hydroelectric power, navigation, or irrigation purposes. Basically then, flood control regulation is NED's primary concern.

Description: The Mobile Data Buoy System was conceived to serve the users requirement for obtaining water quality parameters from two separate watershed systems. In view of the cost constraints of the ERTS program it was obvious that the network of 10 sampling stations required could not be of the fixed installation type; therefore, it was decided to go to a system of battery powered buoys of a size that could be used in one watershed system for a period of time and then moved to another by use of a relatively small 6.7 m (22 foot) boat. The basic idea of the water quality measurement program was to establish the water quality pattern of change from the headwaters of the watersheds to and through the Mobile Bay. This would allow the investigator to develop a good picture of the state's major water resources and the pressures from pollution that are being imposed. At this point in deployment of this mobile system of buoys, it is too early to put a quantitative value on the system, however it appears less expensive than known fixed installations as to first cost. It has a basic advantage in that it can be moved, at very little expense, to alternate sites where it is desired to obtain water quality data. It is to be noted this buoy system which covers a 80 Km (50 mile) stretch of the Black Warrior River and then skips down 483 Km (300 miles) to Mobile Bay for the next measurements would not be feasible unless there is a satellite to collect and relay the data.

Description: Nine sites were selected for installation of Data Collection Platforms (DCPs) with the objective of obtaining one near real time water level reading a day from each site. Also the dependability, costs and other aspects of the system could be studied and decisions made with respect to the feasibility of operating a much larger network of DCPs. The number of transmissions received each day from the gauging stations varies from a maximum of 26 to 12 and a minimum of 10 to 3, depending on the location. Quality checks of data have indicated that the data are good. None of the nine DCPs have failed once they have been successfully activated. The experience with the ERTS data collection system has been excellent. The DCP appears to be a rugged, reliable piece of equipment. The ones installed at water survey sites have withstood temperatures less than -40 C and the antennas have withstood wind speeds of over 80 kph (50 mph) and snow loads of 0.6 m (2 ft).

Description: The earth resources data acquisition systems on ERTS are providing data from the earth's surface that have great potential for resources management. The Data Collection System is providing water resources data several times a day from widely scattered locations in the Delaware River Basin. Within the constraints of an experimental test, the data are being processed and released to water resources agencies in near-real time. The results of ERTS investigations have shown that there is a potential application for satellite-borne systems for earth resources data acquisition. It is becoming clear that the solutions to many natural resource problems can be found faster and more efficiently with the help of data acquisition systems such as those on the ERTS observatory. Under operational conditions, low cost battery-operated DCP's could provide the Geological Survey with data from a large number of field instruments. These data could be used by the Geological Survey to monitor the operational status of field instrumentation and could be used by cooperating agencies to monitor a wide range of earth resources conditions. Under operational conditions, the data flow could be in real time. The delay from time of data acquisition by ERTS to the time of data availability to data users could be reduced to seconds, rather than the present lag time of a few hours.

Description: Get-Away Special (GAS) G-301, named the Flying Falcon and scheduled for launch on the STS-77 Space Shuttle in April, 1996, is being prepared to perform an experiment designed by the Department of Geology, Bowling Green State University (BGSU). The experiment will employ a new type of infrared imager designed and built by a consortium of Teltron Technologies Inc., Hudson Research Inc., and BGSU that is an uncooled, quantrum ferro-electric, infrared return beam vidicon (IRBV) camera capable of detecting thermal infrared radiation throughout the 2.0-50.0 micron wavelength region, and to which an integral, unable Fabry-Perot filter and a telescopic lens have been added. The primary objectives in the experiment include the mapping of methane plumes from solid waste landfills and wetlands in the midwestern U.S., the mapping of methane plumes offshore in the Gulf of Mexico and in the Middle East, brief monitoring for precursors of volcanoes or earthquakes in the South China sea and the East Pacific Rise (about 300 km west of Easter Island), and the mapping of silica content in exposed outcrops and residual soils of the southwestern U.S. and Middle East.

Description: Monitoring spatial and temporal changes of soil moisture are of importance to hydrology, meteorology, and agriculture. This paper reports a result on study of using L-band SAR imagery to estimate soil moisture and surface roughness for bare fields. Due to limitations of the Small Perturbation Model, it is difficult to apply this model on estimation of soil moisture and surface roughness directly. In this study, we show a simplified model derived from the Integral Equation Model for estimation of soil moisture and surface roughness. We show a test of this model using JPL L-band AIRSAR data.

Description: In the tropical rain forests of Manu, in Peru, where forest biomass ranges from 4 kg/sq m in young forest succession up to 100 kg/sq m in old, undisturbed floodplain stands, the P-band polarimetric radar data gathered in June of 1993 by the AIRSAR (Airborne Synthetic Aperture Radar) instrument separate most major vegetation formations and also perform better than expected in estimating woody biomass. The worldwide need for large scale, updated biomass estimates, achieved with a uniformly applied method, as well as reliable maps of land cover, justifies a more in-depth exploration of long wavelength imaging radar applications for tropical forests inventories.

Description: Radar backscatter intensity as measured by calibrated synthetic aperture radar (SAR) systems is primarily controlled by three factors: local incidence angle, wavelength-scale roughness, and dielectric permittivity of surface materials. In order to make adequate use of radar observations for geological investigations of surface type, the relationships between lithology and the above characteristics must be adequately understood. In arid terrains weathering signatures (e.g. fracturing, debris grain size and shape, slope characteristics) are controlled to some extent by lithologic characteristics of the parent bedrock. These textural features of outcrops and their associated debris control radar backscatter to varying degrees. The quad-polarization JPL AIRSAR system allows sampling of textures at three distinct wavelength scales: C-band (5.66 cm), L-band (23.98 cm), and P-band (68.13 cm). This paper presents a discussion of AIRSAR data using recent field observations of weathered felsic and basaltic volcanic rock units exposed in the southern part of the Lunar Crater Volcanic Field, in the Pancake Range of central Nevada. The focus is on the relationship of radar backscatter at multiple wavelengths to weathering style and parent bedrock lithology.

Description: Silicic (silica-rich) lava flows, such as rhyolite, rhyodacite, and dacite, possess unique physical properties primarily because of the relatively high viscosity of the molten lava. Silicic flows tend to be thicker than basaltic flows, and the resulting large-scale morphology is typically a steep-sided dome or flow lobe, with aspect ratios (height/length) sometimes approaching unity. The upper surfaces of silicic domes and flows are normally emplaced as relatively cool, brittle slabs that fracture as they are extruded from the central vent areas, and are then rafted away toward the flow margin as a brittle carapace above a more ductile interior layer. This mode of emplacement results in a surface with unique roughness characteristics, which can be well-characterized by multiparameter synthetic aperture radar (SAR) observations. In this paper, we examine the scattering properties of several silicic domes in the Inyo volcanic chain in the Eastern Sierra of California, using AIRSAR and TOPSAR data. Field measurements of intermediate-scale (cm to tens of m) surface topography and block size are used to assess the mechanisms of the scattering process, and to quantify the unique roughness characteristics of the flow surfaces.

Description: The replacement of semidesert grassland by woody shrubland is a widespread form of desertification. This change in physiognomy and species composition tends to sharply reduce the productivity of the land for grazing by domestic livestock, increase soil erosion and reduce soil fertility, and greatly alter many other aspects of ecosystem structure and functioning. Remote sensing methods are needed to assess and monitor shrubland encroachment. Detection of woody shrubs at low density would provide a particularly useful baseline on which to access changes, because an initially low shrub density often tends to increase even after cessation of the disturbance (e.g., overgrazing, drought, or fire suppression) responsible for triggering the initial stages of the invasion (Grover and Musick, 1990). Limited success has been achieved using optical remote sensing. In contrast to other forms of desertification, biomass does not consistently decrease with a shift from grassland to shrubland. Estimation of green vegetation amount (e.g., by NDVI) is thus of limited utility, unless the shrubs and herbaceous plants differ consistently in phenology and the area can be viewed during a season when only one of these is green. The objective of this study was to determine if the potential sensitivity of active microwave remote sensing to vegetation structure could be used to assess the degree of shrub invasion of grassland. Polarimetric Airborne Synthetic Aperture Radar (AIRSAR) data were acquired for a semiarid site containing varied mixtures of shrubs and herbaceous vegetation and compared with ground observations of vegetation type and other landsurface characteristics. In this preliminary report we examine the response of radar backscatter intensity to shrub density. The response of other multipolarization parameters will be examined in future work.

Description: Conventional representations of polarization response are referred to a horizontally and vertically polarized basis. Recent studies by Freeman and Durden, van Zyl, and others suggest that alternative polarimetric features which more easily resolve the contributions of simple scattering mechanisms such as odd-bounce, even-bounce, and diffuse scattering could offer several advantages in terrain classification. The circular polarization covariance matrix is a potential source of such features. In this paper, we derive its relationship to the Stokes matrix, describe some of its properties, and compare the utility of linear and circular polarimetric features in classifying an AIRSAR scene containing urban, park, and ocean terrain.

Description: The relationship between habitat area, spatial dynamics of the landscape, and species diversity is an important theme in population and conservation biology. Of particular interest is how populations of various species are affected by increasing habitat edges due to fragmentation. Over the last decade, assumptions regarding the effects of habitat edges on biodiversity have fluctuated wildly, from the belief that they have a positive effect to the belief that they have a clearly negative effect. This change in viewpoint has been brought about by an increasing recognition of the importance of geographic scale and a reinterpretation of natural history observations. In this preliminary report from an ongoing project, we explore the use of remote sensing technology and geographic information systems to further our understanding of how species diversity and population density are affected by habitat heterogeneity and landscape composition. A primary feature of this study is the investigation of SAR for making more rigorous investigations of habitat structure by exploiting the interaction between radar backscatter and vegetation structure and biomass. A major emphasis will be on the use of SAR data to define relative structural types based on measures of structural consolidation using the vegetation surface area to volume ratio (SA/V). Past research has shown that SAR may be sensitive to this form of structural expression which may affect biodiversity.

Description: Landforms in arid regions record the interplay between tectonic forces and climate. Alluvial fans are a common landform in desert regions where the rate of uplift is greater than weathering or sedimentation. Changes in uplift rate or climatic conditions can lead to isolation of the currently forming fan surface through entrenchment and construction of another fan either further from the mountain front (decreased uplift or increased runoff) or closer to the mountain front (increased uplift or decreased runoff). Thus, many alluvial fans are made up of a mosaic of fan units of different age, some older than 1 million years. For this reason, determination of the stages of fan evolution can lead to a history of uplift and runoff. In an attempt to separate the effects of tectonic (uplift) and climatic (weathering, runoff, sedimentation) processes on the shapes of alluvial fan units, a modified conic equation developed by Troeh (1965) was fitted to TOPSAR digital topographic data for the Trail Canyon alluvial fan in Death Valley, California. This allows parameters for the apex position, slope, and radial curvature to be compared with unit age.

Description: During recent years signature analysis, classification, and modeling of Synthetic Aperture Radar (SAR) data as well as estimation of geophysical parameters from SAR data have received a great deal of interest. An important requirement for the quantitative use of SAR data is the accurate estimation of the backscattering coefficient sigma(exp 0). In terrain with relief variations radar signals are distorted due to the projection of the scene topography into the slant range-Doppler plane. The effect of these variations is to change the physical size of the scattering area, leading to errors in the radar backscatter values and incidence angle. For this reason the local incidence angle, derived from sensor position and Digital Elevation Model (DEM) data must always be considered. Especially in the airborne case, the antenna gain pattern can be an additional source of radiometric error, because the radar look angle is not known precisely as a result of the the aircraft motions and the local surface topography. Consequently, radiometric distortions due to the antenna gain pattern must also be corrected for each resolution cell, by taking into account aircraft displacements (position and attitude) and position of the backscatter element, defined by the DEM data. In this paper, a method to derive an accurate estimation of the backscattering coefficient using NASA/JPL AIRSAR data is presented. The results are evaluated in terms of geometric accuracy, radiometric variations of sigma(exp 0), and precision of the estimated forest biomass.

Description: An empirical model was developed to infer soil moisture and surface roughness from radar data. The accuracy of the inversion technique is assessed by comparing soil moisture obtained with the inversion technique to in situ measurements. The effect of vegetation on the inversion is studied and a method to eliminate the areas where vegetation impairs the algorithm is described.

Description: In 1993 NASA's Jet Propulsion Laboratory Airborne Synthetic Aperture Radar system (AIRSAR) was deployed to South America to collect multi-parameter radar data over pre-selected targets. Among the sites targeted was a series of wind streaks located in the Altiplano of Bolivia. The objective of this investigation is to study the effect of wavelength, polarization, and incidence angle on the visibility of wind streaks in radar data. Because this is a preliminary evaluation of the recently acquired data we will focus on one scene and, thus, only on the effects of wavelength and polarization. Wind streaks provide information on the near-surface prevailing winds and on the abundance of winderodible material, such as sand. The potential for a free-flyer radar system that could provide global radar images in multiple wavelengths, polarizations, and incidence angles requires definition of system parameters for mission planning. Furthermore, thousands of wind streaks were mapped from Magellan radar images of Venus; their interpretation requires an understanding of the interaction of radar with wind streaks and the surrounding terrain. Our experiment was conducted on wind streaks in the Altiplano of Bolivia to address these issues.

Description: The Thermal Infrared Multispectral Scanner (TIMS) was flown on the NASA C-130 aircraft for a series of 12 flights during HAPEX-Sahel at altitudes ranging from 0.25 to 6 km (0.6 to 15 m resolution). TIMS provides coverage of the 8 to 12 micrometer thermal infrared band in 6 contiguous channels. Thus it is possible to observe the spectral behavior of the surface emissivity over this wavelength interval.

Description: Thermal Infrared Multispectral Scanner (TIMS) data were acquired over the McDowell Mountains northeast of Scottsdale, Arizona during August 1994. The raw data were processed to emphasize lithologic differences using a decorrelation stretch and assigning bands 5, 3, and 1 to red, green, and blue, respectively. Processed data of alluvium flanking the mountains exhibit moderate color variation. The objective of this study was to determine, using a quantitative approach, what environmental variable(s), in the absence of bedrock, is/are responsible for influencing the spectral properties of the desert alluvial surface.

Description: In mineral exploration, the ability to distinguish and map petrochemical variations of magmatic rocks can be a useful reconnaissance tool. Alkalinity is one such petrochemical parameter and is used in the characterization of granitoid rocks. In quartz normative plutonic rocks, alkalinity is related to the composition and abundance of feldspars. Together with quartz abundance, knowledge of feldspar modes allows the classification of these igneous rocks according to the Streckeisen diagram. Alternative classification schemes rely on whole rock geochemistry instead of mineral identifications. The relative ease of obtaining whole rock analyses means that geochemical classifications tend to be favored in exploration geology. But the technique of thermal infrared spectroscopy of rocks yields information on mineralogy and is one that can be applied remotely. The goal of the current work then is to establish whether data from TIMS can be used to distinguish the mineralogical variations that relate to alkalinity. An ideal opportunity to test this thesis arises from the work presented in a paper by Dewitt (1989). This paper contains the results of mapping and analysis of Proterozoic plutonic rocks in north-central Arizona. The map resulting from this work delineates plutons according to alkalinity in an effort to establish a trend or polarity in the regional magmatism. Also contained within this paper are brief descriptions of the mineralogy of half of the region's plutons. This combination of mineralogical and geochemical information was the rationale behind choosing this area as a site for TIMS over flights. A portion of the region centered on the northern Bradshaw Mountains was selected because it contains plutons of all three alkalinity classifications (alkali-calcic, calc-alkalic, and calic) present on DeWitt's map within a relatively small area. The site was flown in August of 1994 and the data received a few days before the writing of this manuscript. Most of this paper is devoted to the description of laboratory based spectroscopy and spectral simulations. These are required to gain insight into the correct procedures for enhancing the relatively small differences in the low spectral resolution TIMS data.

Description: This paper describes an empirical method to correct TIMS (Thermal Infrared Multispectral Scanner) data for atmospheric effects by transferring calibration from a laboratory thermal emission spectrometer to the TIMS multispectral image. The method does so by comparing the laboratory spectra of samples gathered in the field with TIMS 6-point spectra for pixels at the location of field sampling sites. The transference of calibration also makes it possible to use spectra from the laboratory as endmembers in unmixing studies of TIMS data.

Description: Remote sensing is a tool that, in the context of aeolian studies, offers a synoptic view of a dune field, sand sea, or entire desert region. Blount et al. (1990) presented one of the first studies demonstrating the power of multispectral images for interpreting the dynamic history of an aeolian sand sea. Blount's work on the Gran Desierto of Mexico used a Landsat TM scene and a linear spectral mixing model to show where different sand populations occur and along what paths these sands may have traveled before becoming incorporated into dunes. Interpretation of sand transport paths and sources in the Gran Desierto led to an improved understanding of the origin and Holocene history of the dunes. With the anticipated advent of the EOS-A platform and ASTER thermal infrared capability in 1998, it will become possible to look at continental sand seas and map sand transport paths using 8-12 mu m bands that are well-suited to tracking silicate sediments. A logical extension of Blount's work is to attempt a similar study using thermal infrared images. One such study has already begun by looking at feldspar, quartz, magnetite, and clay distributions in the Kelso Dunes of southern California. This paper describes the geology and application of TIMS image analysis of a less-well known Holocene dune field in south central Oregon using TIMS data obtained in 1991.

Description: A research program has been initiated between Arizona State University and the City of Scottsdale, Arizona to study the potential applications of TIMS (Thermal Infrared Multispectral Scanner) data for urban scene classification, desert environmental assessment, and change detection. This program is part of a long-term effort to integrate remote sensing observations into state and local planning activities to improve decision making and future planning. Specific test sites include a section of the downtown Scottsdale region that has been mapped in very high detail as part of a pilot program to develop an extensive GIS database. This area thus provides excellent time history of the evolution of the city infrastructure, such as the timing and composition of street repavement. A second area of study includes the McDowell intensive study by state and local agencies to assess potential sites for urban development as well as preservation. These activities are of particular relevance as the Phoenix metropolitan area undergoes major expansion into the surrounding desert areas. The objectives of this study in urban areas are aimed at determining potential applications of TIMS data for classifying and assessing land use and surface temperatures. Land use centers on surface impermeability studies for storm runoff assessment and pollution control. These studies focus on determining the areal abundance of urban vegetation and undeveloped soil. Highly experimental applications include assessment and monitoring of pavement condition. Temperature studies focus on determining swimming pool area and temperature for use in monitoring evaporating and urban water consumption. These activities are of particular relevance as the Phoenix metropolitan area undergoes major expansion into the surrounding desert area.

Description: Remote sensing of sand dunes helps in the understanding of aeolian process and provides important information about the regional geologic history, environmental change, and desertification. Remotely sensed data combined with field studies are valuable in studying dune morphology, regional aeolian dynamics, and aeolian depositional history. In particular, active and inactive sands of the Kelso Dunes have been studied using landsat TM and AIRSAR. In this report, we describe the use of AVIRIS data to study the Kelso dunes and to compare the AVIRIS information with that from TM and AIRSAR.

Description: Vulcano Island is part of the Eolian archipelago, located about 25 km from the northeast coast of Sicily. The archipelago comprises seven major volcanic islands, two of which are active volcanoes (Vulcano and Stromboli). Vulcano covers an area of about 50 square km, and is about 10 km long. Explosive volcanic activity has predominated in the geological evolution of Vulcano Island, and there is no evidence that this pattern has ceased. Rather, the current situation is one of unrest, so a strict regimen of continuous geophysical and geochemical monitoring has been undertaken over the last decade. Though the year-round population of Vulcano is small (under 1000), during the summer the island becomes a very popular resort, and has thousands of additional tourists at any time throughout the high season, thus substantially increasing the number of people potentially at risk from an explosive eruption or other hazards such as noxious gas emissions (e.g., CO2, H2S, SO2). During the past ten years, remote sensing data have been repetitively acquired with optical and microwave airborne sensors. The present work shows the preliminary results of a study based on the integration of various remote sensing data sets with field spectroscopy, and other laboratory analyses, for the geological and geomorphological mapping of the island. It is hoped that such work will also usefully contribute to the evaluation of the volcanic hazard potential of the islands as well as to the evaluation of the status of its current activity.

Description: The rapid development of sophisticated imaging spectrometers and resulting flood of imaging spectrometry data has prompted a rapid parallel development of spectral-information extraction technology. Even though these extraction techniques have evolved along different lines (band-shape fitting, endmember unmixing, near-infrared analysis, neural-network fitting, and expert systems to name a few), all are limited by the spectrometer's signal to noise (S/N) and spectral resolution in producing useful information. This study grew from a need to quantitatively determine what effects these parameters have on our ability to differentiate between mineral absorption features using a band-shape fitting algorithm. We chose to evaluate the AVIRIS, HYDICE, MIVIS, GERIS, VIMS, NIMS, and ASTER instruments because they collect data over wide S/N and spectral-resolution ranges. The study evaluates the performance of the Tricorder algorithm, in differentiating between mineral spectra in the 0.4-2.5 micrometer spectral region. The strength of the Tricorder algorithm is in its ability to produce an easily understood comparison of band shape that can concentrate on small relevant portions of the spectra, giving it an advantage over most unmixing schemes, and in that it need not spend large amounts of time reoptimizing each time a new mineral component is added to its reference library, as is the case with neural-network schemes. We believe the flexibility of the Tricorder algorithm is unparalleled among spectral-extraction techniques and that the results from this study, although dealing with minerals, will have direct applications to spectral identification in other disciplines.

Description: Surface reflectance retrieval from imaging spectrometer data as acquired with the Airborne Visible/Infrared Imaging Spectrometer (AVIRIS) has become important for quantitative analysis. In order to calculate surface reflectance from remotely measured radiance, radiative transfer codes such as 5S and MODTRAN2 play an increasing role for removal of scattering and absorption effects of the atmosphere. Accurate knowledge of the exo-atmospheric solar irradiance (E(sub 0)) spectrum at the spectral resolution of the sensor is important for this purpose. The present study investigates the impact of differences in the solar irradiance function, as implemented in a modified version of 5S (M5S), 6S, and MODTRAN2, and as proposed by Green and Gao, on the surface reflectance retrieved from AVIRIS data. Reflectance measured in situ is used as a basis of comparison.

Description: The potential of airborne imaging spectrometry for assessing and monitoring natural resources is studied. Therefore, an AVIRIS scene of the NASA's MacEurope 1991 campaign - acquired in Central Switzerland - is used. The test site consists of an urban area, the Lake Zug with its surrounding fields, the Rigi mountain in the center of the test site, and the Lake of Four Cantons. The region is covered by the AVIRIS flight #910705, run 6 and 7 of the NASA ER-2 aircraft resulting in an average nominal pixel size of about 18 m. Simultaneous to the ER-2 overflight spectroradiometric measurements have been taken in various locations. Preselected reference targets were measured in the field with a GER Mark V spectroradiometer, and radiance measurements were taken to the lake using a Li-Cor LI 1800UW specroradiometer below and above the water surface. A comprehensive meteorological data set was obtained by joining the POLLUMET experiment which carried out measurements to investigate the summer smog in Switzerland on the same day. The quality assessment for the actual data set can be found in detail in Meyer et al. A parametric approach calculating the location of the airplane was used to simulate the observation geometry. This parametric preprocessing procedure, which takes care of effects of flight line and attitude variations as well as the pixel-by-pixel topographic corrections is described in Meyer.

Description: Roads and highways show up clearly in many bands of AVIRIS images. A typical lane in the U.S. is 12 feet wide, and the total width of a four lane highway, including 18 feet of paved shoulders, is 19.8 m. Such a highway will cover only a portion of any 20x20 m AVIRIS pixel that it traverses. The other portion of these pixels wil be usually covered by vegetation. An interesting problem is to precisely determine the location of a highway within the AVIRIS pixels that it traverses. This information may be used for alignment and spatial calibration of AVIRIS images. Also, since the reflection properties of highway surfaces do not change with time, and they can be determined once and for all, such information can be of help in calculating and filtering out the atmospheric noise that contaminates AVIRIS measurements. The purpose of this report is to describe a method for sub-pixel localization of highways.

Description: Heterogeneity in ecological phenomena are scale dependent and affect the hierarchical structure of image data. AVIRIS pixels average reflectance produced by complex absorption and scattering interactions between biogeochemical composition, canopy architecture, view and illumination angles, species distributions, and plant cover as well as other factors. These scales affect validation of pixel reflectance, typically performed by relating pixel spectra to ground measurements acquired at scales of 1m(exp 2) or less (e.g., field spectra, foilage and soil samples, etc.). As image analysis becomes more sophisticated, such as those for detection of canopy chemistry, better validation becomes a critical problem. This paper presents a methodology for bridging between point measurements and pixels using geostatistics. Geostatistics have been extensively used in geological or hydrogeolocial studies but have received little application in ecological studies. The key criteria for kriging estimation is that the phenomena varies in space and that an underlying controlling process produces spatial correlation between the measured data points. Ecological variation meets this requirement because communities vary along environmental gradients like soil moisture, nutrient availability, or topography.

Description: A simple mixing model employing reference endmembers (green vegetation, non-photosynthetic vegetation, soil and shade), and using 180 AVIRIS bands, was used to establish an interpretive framework for a forested area in the Pacific Northwest. A regrowth trend, based on changes in the endmember proportions, was defined for conifers that extends from clearcuts to mature forest, and by implication to old growth. Deciduous species within replanted forest plots caused the fractions to be displaced from the main coniferous regrowth trend and to move toward the green vegetation fraction. The results indicate that the spectral information in AVIRIS can be inverted to estimate approximate stand age and relative proportion of deciduous species in the context of the area studied. Using AVIRIS we measured a 3 to 5 percent increase in woody material in old-growth forest, as distinct from other mature forest. This result is consistent with a predicted increase in NPV in old-growth forest, based on field observations. Previous application of the mixing analysis to a TM image of the same area separated old growth based solely on the shade fraction; however the approach required successful removal of shade introduced by topography. Our new results suggest that with the high spectral resolution and high signal-to-noise of AVIRIS images it may be possible to characterize and map old-growth forests in the Northwest using both the NPV fraction and shade.

Description: Spectral Mixture Analysis (SMA) has become a well established procedure for analyzing imaging spectrometry data, however, the technique is relatively insensitive to minor sources of spectral variation (e.g., discriminating stressed from unstressed vegetation and variations in canopy chemistry). Other statistical approaches have been tried e.g., stepwise multiple linear regression analysis to predict canopy chemistry. Grossman et al. reported that SMLR is sensitive to measurement error and that the prediction of minor chemical components are not independent of patterns observed in more dominant spectral components like water. Further, they observed that the relationships were strongly dependent on the mode of expressing reflectance (R, -log R) and whether chemistry was expressed on a weight (g/g) or are basis (g/sq m). Thus, alternative multivariate techniques need to be examined. Smith et al. reported a revised SMA that they termed Foreground/Background Analysis (FBA) that permits directing the analysis along any axis of variance by identifying vectors through the n-dimensional spectral volume orthonormal to each other. Here, we report an application of the FBA technique for the detection of canopy chemistry using a modified form of the analysis.

Description: Surface albedo and snow-covered-area (SCA) are crucial inputs to the hydrologic and climatologic modeling of alpine and seasonally snow-covered areas. Because the spectral albedo and thermal regime of pure snow depend on grain size, areal distribution of snow grain size is required. Remote sensing has been shown to be an effective (and necessary) means of deriving maps of grain size distribution and snow-covered-area. Developed here is a technique whereby maps of grain size distribution improve estimates of SCA from spectral mixture analysis with AVIRIS data.

Description: Experimental results have shown the existence of a strong relationship between chlorophyll alpha concentration and remote sensing reflectance measured at lake level with a high resolution spectroradiometer. The objective of our study was to investigate the relationship between surface chlorophyll alpha concentration at Mono Lake and water reflectance retrieved from Airborne Visible - Infrared Imaging Spectrometer (AVIRIS) data obtained in october 7, 1992. AVIRIS data were atmospherically corrected as described by Green et al. A description of the lake-level sampling is found in Melack and Gastil. The relationship between chlorophyll concentration and both the single band reflectance and the first difference transformation of the reflectance spectra for the first 40 AVIRIS spectral bands (400 nm to 740 nm) was examined. The relationship was then used to produce a map of the surface chlorophyll distribution.

Description: We have demonstrated the unique utility of imaging spectroscopy in mapping mineral distribution. In the Summitville mining region we have shown that the mine site does not contribute clay minerals to the Alamosa River, but does contribute Fe-bearing minerals. Such minerals have the potential to carry heavy metals. This application illustrates only one specific environmental application of imaging spectroscopy data. For instance, the types of minerals we can map with confidence are those frequently associated with environmental problems related to active and abandoned mine lands. Thus, the potential utility of this technology to the field of environmental science has yet to be fully explored.

Description: Melting of the snowpack is a critical parameter that drives aspects of the hydrology in regions of the earth where snow accumulates seasonally. New techniques for measurement of snow melt over regional scales offer the potential to improve monitoring and modeling of snow-driven hydrological processes. We present the results of measuring the spectral absorption of liquid water in a melting snowpack with the Airborne Visible/Infrared Imaging Spectrometer (AVIRIS). AVIRIS data were acquired over Mammoth Mountain, in east central California on 21 May 1994 at 18:35 UTC. The air temperature at 2926 m on Mammoth Mountain at site A was measured at 15-minute intervals during the day preceding the AVIRIS data acquisition. At this elevation, the air temperature did not drop below freezing the night of May 20 and had risen to 6 degrees Celsius by the time of the overflight on May 21. These temperature conditions support the presence of melting snow at the surface as the AVIRIS data were acquired.

Description: The Airborne Visible/Infrared Imaging Spectrometer (AVIRIS) acquired data as part of the Boreal Ecosystem-Atmosphere Study (BOREAS) in 1994. Flights occurred over the northern study area (NSA) in the region of 56 degrees north latitude and 98.5 degrees west longitude and over the southern study area (SSA) at 54 degrees north latitude and 105 degrees west longitude. These data will be used to directly derive spectral properties of the surface and atmosphere and to provide supporting data for other instruments, models, and experiments in support of the BOREAS objectives. We present a preliminary evaluation of the AVIRIS data collected in BOREAS in terms of the AVIRIS-derived parameters: water vapor, leaf water, and apparent spectral reflectance.

Description: The remote estimation of leaf biochemical content from spaceborne platforms has been the subject of many studies aimed at better understanding of terrestrial ecosystem functioning. The major ecological processes involved in exchange of matter and energy, like photosynthesis, primary production, evaportranspiration, respiration, and decomposition can be related to plant properties e.g., chlorophyll, water, protein, cellulose and lignin contents. As leaves represent the most important plant surfaces interacting with solar energy, a top priority has been to relate optical properties to biochemical constituents. Two different approaches have been considered: first, statistical correlations between the leaf reflectance (or transmittance) and biochemical content, and second, physically based models of leaf scattering and absorption developed using the laws of optics. Recently reviewed by Verdebout et al., the development of models of leaf optical properties has resulted in better understanding of the interaction of light with plant leaves. Present radiative transfer models mainly use chlorophyll and/or water contents as input parameters to calculate leaf reflectance. Inversion of these models allows to retrieve these constituents from spectrophotometric measurements. Conel et al. recently proposed a two-stream Kubelka-Munk model to analyze the influence of protein, cellulose, lignin, and starch on leaf reflectance, but in fact, the estimation of leaf biochemistry from remote sensing is still an open question. In order to clarify it, a laboratory experiment associating visible/infrared spectra of plan leaves both with physical measurements and biochemical analyses was conducted at the Joint Research Center during the summer of 1993. This unique data set has been used to upgrade the PROSPECT model, by including leaf biochemistry.

Description: Plant species composition and plant architectural attributes are critical parameters required for the measuring, monitoring, and modeling of terrestrial ecosystems. Remote sensing is commonly cited as an important tool for deriving vegetation properties at an appropriate scale for ecosystem studies, ranging from local to regional and even synoptic scales. Classical approaches rely on vegetation indices such as the normalized difference vegetation index (NDVI) to estimate biophysical parameters such as leaf area index or intercepted photosynthetically active radiation (IPAR). Another approach is to apply a variety of classification schemes to map vegetation and thus extrapolate fine-scale information about specific sites to larger areas of similar composition. Imaging spectrometry provides additional information that is not obtainable through broad-band sensors and that may provide improved inputs both to direct biophysical estimates as well as classification schemes. Some of this capability has been demonstrated through improved discrimination of vegetation, estimates of canopy biochemistry, and liquid water estimates from vegetation. We investigate further the potential of leaf water absorption estimated from Airborne Visible/Infrared Imaging Spectrometer (AVIRIS) data as a means for discriminating vegetation types and deriving canopy architectural information. We expand our analysis to incorporate liquid water estimates from two spectral regions, the 1000-nm region and the 2200-nm region. The study was conducted in the vicinity of Jasper Ridge, California, which is located on the San Francisco peninsula to the west of the Stanford University campus. AVIRIS data were acquired over Jasper Ridge, CA, on June 2, 1992, at 19:31 UTC. Spectra from three sites in this image were analyzed. These data are from an area of healthy grass, oak woodland, and redwood forest, respectively. For these analyses, the AVIRIS-measured upwelling radiance spectra for the entire Jasper Ridge scene were transformed to apparent surface reflectance using a radiative transfer code-based inversion algorithm.