ALBERT

Description: In this paper we present one year of meteorological and flux measurements obtained near Ny-Ålesund, Spitsbergen. Fluxes are derived by the eddy covariance method and by a hydrodynamic model approach (HMA) as well. Both methods are compared and analyzed with respect to season and mean wind direction. Concerning the wind field we find a clear distinction between 3 prevailing regimes (which have influence on the flux behavior) mainly caused by the topography at the measurement site. Concerning the fluxes we find a good agreement between the HMA and the eddy covariance method in cases of turbulent mixing in summer but deviations at stable conditions, when the HMA almost always shows negative fluxes. Part of the deviation is based on a dependence of HMA fluxes on friction velocity and the influence of the molecular boundary layer. Moreover, the flagging system of the eddy covariance software package TK3 is briefly revised. A new quality criterion for the use of fluxes obtained by the eddy covariance method, which is based on integral turbulence characteristics, is proposed.

Description: © The Author(s), 2012. This article is distributed under the terms of the Creative Commons Attribution License. The definitive version was published in International Journal of Distributed Sensor Networks 2012 (2012): 191235, doi:10.1155/2012/191235.

Description: In recent years, there has been significant concern about the impacts of offshore oil spill plumes and harmful algal blooms on the coastal ocean environment and biology, as well as on the human populations adjacent to these coastal regions. Thus, it has become increasingly important to determine the 3D extent of these ocean features (“plumes”) and how they evolve over time. The ocean environment is largely inaccessible to sensing directly by humans, motivating the need for robots to intelligently sense the ocean for us. In this paper, we propose the use of an autonomous underwater vehicle (AUV) network to track and predict plume shape and motion, discussing solutions to the challenges of spatiotemporal data aliasing (coverage versus resolution), underwater communication, AUV autonomy, data fusion, and coordination of multiple AUVs. A plume simulation is also developed here as the first step toward implementing behaviors for autonomous, adaptive plume tracking with AUVs, modeling a plume as a sum of Fourier orders and examining the resulting errors. This is then extended to include plume forecasting based on time variations, and future improvements and implementation are discussed.

Description: This research was made with Government support under and awarded by DoD, Air Force Office of Scientific Research, National Defense Science and Engineering Graduate (NDSEG) Fellowship, 32 CFR 168a.

Description: A proper orthogonal decomposition (POD) method is used to interpolate the flow around an airfoil for various Mach numbers and angles of attack in the transonic regime. POD uses a few numerical simulations, called snapshots, to create eigenfunctions. These eigenfunctions are combined using weighting coefficients to create a new solution for different values of the input parameters. Since POD methods are linear, their interpolation capabilities are quite limited when dealing with flow presenting nonlinearities, such as shocks. In order to improve their performance for cases involving shocks, a new method is proposed using variable fidelity. The main idea is to use POD to interpolate the difference between the CFD solution obtained on two different grids, a coarse one and a fine one. Then, for any new input parameter value, a coarse grid solution is computed using CFD and the POD interpolated difference is added to predict the fine grid solution. This allows some nonlinearities associated with the flow to be introduced. Results for various Mach numbers and angles of attack are compared to full CFD results. The variable fidelity-based POD method shows good improvement over the classical approach.

Description: The preparation of carbon nanotube/metallic particle hybrids using pressed porous stainless steel pellets as a substrate is described. The catalytic growth of carbon nanotubes was carried out by CVD on a nickel catalyst obtained by impregnation of pellets with a highly dispersive colloidal solution of nickel acetate tetrahydrate in ethanol. Granular polyethylene was used as the carbon source. Metallic particles were deposited by thermal evaporation of Pt and Ag using pellets with grown carbon nanotubes as a base. The use of such composites as fuel cell electrodes is discussed.

Description: This work provides a distributed fault-tolerant event region detection algorithm for wireless sensor networks. The proposed algorithm can identify faulty and fault-free sensors and ignore the abnormal readings to avoid false alarm. Moreover, every event region can also be detected and identified. Simulation results show that fault detection accuracy (FDA) is greater than 92%, false alarm rate (FAR) is near 0%, and event detection accuracy (EDA) is greater than 99% under uniform distribution. FDA is greater than 92%, FAR is less than 1.2%, and EDA is greater than 88% under random distribution when sensor fault probability is less than 0.3.

Description: Pupylation, one of the most important posttranslational modifications of proteins, typically takes place when prokaryotic ubiquitin-like protein (Pup) is attached to specific lysine residues on a target protein. Identification of pupylation substrates and their corresponding sites will facilitate the understanding of the molecular mechanism of pupylation. Comparing with the labor-intensive and time-consuming experiment approaches, computational prediction of pupylation sites is much desirable for their convenience and fast speed. In this study, a new bioinformatics tool named EnsemblePup was developed that used an ensemble of support vector machine classifiers to predict pupylation sites. The highlight of EnsemblePup was to utilize the Bi-profile Bayes feature extraction as the encoding scheme. The performance of EnsemblePup was measured with a sensitivity of 79.49%, a specificity of 82.35%, an accuracy of 85.43%, and a Matthews correlation coefficient of 0.617 using the 5-fold cross validation on the training dataset. When compared with other existing methods on a benchmark dataset, the EnsemblePup provided better predictive performance, with a sensitivity of 80.00%, a specificity of 83.33%, an accuracy of 82.00%, and a Matthews correlation coefficient of 0.629. The experimental results suggested that EnsemblePup presented here might be useful to identify and annotate potential pupylation sites in proteins of interest. A web server for predicting pupylation sites was developed.

Description: We used a one-dimensional simulation program Solar Cell Capacitance Simulator in 1 Dimension (SCAPS-1D) to investigate Copper-Indium-Gallium-Diselenide- (CIGS-) based solar cells properties. Starting with a conventional ZnO-B/i-ZnO/CdS/CIGS structure, we simulated the parameters of current-voltage characteristics and showed how the absorber layer thickness, hole density, and band gap influence the short-circuit current density (), open-circuit voltage (), fill factor (FF), and efficiency of solar cell. Our simulation results showed that all electrical parameters are greatly affected by the absorber thickness (w) below 1000 nm, due to the increase of back-contact recombination and very poor absorption. Increasing hole density (p) or absorber band gap () improves and leads to high efficiency, which equals value of 16.1% when p = 1016 cm−3 and  eV. In order to reduce back-contact recombination, the effect of a very thin layer with high band gap inserted near the back contact and acting as electrons reflector, the so-called back-electron reflector (EBR), has been investigated. The performances of the solar cells are significantly improved, when ultrathin absorbers (w 〈 500 nm) are used; the corresponding gain of due to the EBR is 3 mA/cm2. Our results are in good agreement with those reported in the literature from experiments.

Description: The work presents comparisons of the flame stabilization characteristics of axisymmetric disk and 2D slender bluff-body burner configurations, operating with inlet mixture stratification, under ultralean conditions. A double cavity propane air premixer formed along three concentric disks, supplied with a radial equivalence ratio gradient the afterbody disk recirculation, where the first flame configuration is stabilized. Planar fuel injection along the center plane of the leading face of a slender square cylinder against the approach cross-flow results in a stratified flame configuration stabilized alongside the wake formation region in the second setup. Measurements of velocities, temperatures, and chemiluminescence, local extinction criteria, and large-eddy simulations are employed to examine a range of ultralean and close to extinction flame conditions. The variations of the reacting front disposition within these diverse reacting wake topologies, the effect of the successive suppression of heat release on the near flame region characteristics, and the reemergence of large-scale vortical activity on approach to lean blowoff (LBO) are investigated. The cross-correlation of the performance of these two popular flame holders that are at the opposite ends of current applications might offer helpful insights into more effective control measures for expanding the operational margin of a wider range of stabilization configurations.

Description: This review covers methods for modifying the structures of polysaccharides. The introduction of hydrophobic, acidic, basic, or other functionality into polysaccharide structures can alter the properties of materials based on these substances. The development of chemical methods to achieve this aim is an ongoing area of research that is expected to become more important as the emphasis on using renewable starting materials and sustainable processes increases in the future. The methods covered in this review include ester and ether formation using saccharide oxygen nucleophiles, including enzymatic reactions and aspects of regioselectivity; the introduction of heteroatomic nucleophiles into polysaccharide chains; the oxidation of polysaccharides, including oxidative glycol cleavage, chemical oxidation of primary alcohols to carboxylic acids, and enzymatic oxidation of primary alcohols to aldehydes; reactions of uronic-acid-based polysaccharides; nucleophilic reactions of the amines of chitosan; and the formation of unsaturated polysaccharide derivatives.

Description: The electroreduction behaviour and determination of cefoperazone using a hanging mercury drop electrode were investigated. Cyclic voltammograms of cefoperazone recorded in universal Britton-Robinson buffers pH 3–6 exhibited a single irreversible cathodic peak. The process was adsorption-controlled. Britton-Robinson buffer 0.04 M pH 4.0 was selected as a supporting electrolyte for quantitative purposes by differential pulse and square wave adsorptive cathodic stripping voltammetry. The experimental voltammetric conditions were optimized using Central Composite Face design. A reduction wave was seen in the range from −0.7 to −0.8 V. These voltammetric techniques were successfully validated as per ICH guidelines and applied for the determination of cefoperazone in its single and sulbactam containing powders for injection and statistically comparable to USP-HPLC. They were further extended to determine cefoperazone in spiked human urine with no matrix effect.

Description: The problem of exponential stability for the uncertain neutral Markovian jump systems with interval time-varying delays and nonlinear perturbations is investigated in this paper. This study starts from the corresponding nominal systems with known and partially unknown transition rates, respectively. By constructing a novel augmented Lyapunov functional which contains triple-integral terms and fully utilizes the bound of the delay, the delay-range-dependent and rate-dependent exponential stability criteria are developed by the Lyapunov theory, reciprocally convex lemma, and free weighting matrices. Then, the results about nominal systems are extended to the uncertain case. Finally, numerical examples are given to demonstrate the effectiveness of the proposed methods.

Description: The local fractional Schrödinger equations in the one-dimensional Cantorian system are investigated. The approximations solutions are obtained by using the local fractional series expansion method. The obtained solutions show that the present method is an efficient and simple tool for solving the linear partial differentiable equations within the local fractional derivative.

Description: An experiment of hydrogen preparation from steam-carbon reaction catalyzed by K2CO3 was carried out at 700°C, which was driven by the solar reaction system simulated with Xenon lamp. It can be found that the rate of reaction with catalyst is 10 times more than that without catalyst. However, for the catalytic reaction, there is no obvious change for the rate of hydrogen generation with catalyst content range from 10% to 20%. Besides, the conversion efficiency of solar energy to chemical energy is more than 13.1% over that by photovoltaic-electrolysis route. An analysis to the mechanism of catalytic steam-carbon reaction with K2CO3 is given, and an explanation to the nonbalanced [H2]/[CO + 2CO2] is presented, which is a phenomenon usually observed in experiment.

Description: Concentrations of Cd, Co, Pb, and Zn in riverbed sediments from six sampling stations along the Sungai Kilim, Langkawi, Malaysia, were determined by using the Teflon Bomb Digestion. From this study, the concentrations of heavy metals in riverbed sediments were found ranging between 6.10 and 8.87 μg/g dry weight for Co, 0.03 and 0.45 μg/g dry weight for Cd, 59.8 and 74.9 μg/g dry weight for Zn, and 1.06 and 11.69 μg/g dry weight for Pb. From the observation, these areas were polluted by domestic waste, aquaculture, and tourism activities. For clarity, enrichment factor index was used to determine the level of sediment contamination in the study area. From this study, the average EF value is a bit high for Cd () followed by Zn (), Pb (), and lastly, Co (). Based on the contamination categories, Cd was categorised as moderately enriched, while the rest of the metals studied were in deficient-to-minimally enriched by the anthropogenic sources.

Description: A catalytic adsorptive cathodic stripping voltammetric method on an improved bismuth film electrode (BiFE) for the determination of trace germanium in the presence of pyrogallol has been investigated. A well-defined and sensitive stripping peak of Ge(IV)-pyrogallol complex was observed at −0.79 V (versus SCE) in a 0.1 M acetate buffer solution (pH 4.8) at a deposition potential of −0.34 V. The reduction current is catalytically enhanced by adding KBrO3. The experimental variables and potential interference were studied. Compared with the BiFE plated in the solution prepared based on HAc-NaAc without trisodium citrate, the improved BiFE electrodeposited in the solution of HAc-NaAc containing trisodium citrate displayed a better electroanalytical performance for the determination of germanium(IV). Under the optimized conditions, the detection limit of Ge(IV) was 60 ng L−1, and the relative standard deviation (RSD) was 3.73% at 5 μg L−1 level (). This method was successfully applied to determine the total germanium in several Chinese herbal remedies.

Description: Changes of antioxidant properties of -lipoic acid (LA) after UV irradiation were studied. LA is the typical drug used in diabetic neuropathy. Quenching of free radicals is an important factor of therapy by using this substance. -Lipoic acid is exposed to UV irradiation during the storage. The aim of our studies was to examine the effect of UV irradiation on the interactions of LA with free radicals. The -lipoic acid was irradiated by UVA 315–400 nm light during 10 to 110 minutes by intervals of 10 minutes. The electron paramagnetic resonance spectroscopy was used as the experimental technique. The antioxidant properties of LA were spectroscopically confirmed. The strong effect of UV irradiation on interactions of -lipoic acid with free radicals was observed. It was pointed out that interactions of LA with free radicals decrease after its exposition on UV. The interactions of LA with free radicals were higher after the sample irradiation during 10 minutes than for the samples irradiated longer (20–110 minutes). The results are important for problems connected with photomedicine; they pointed out that -lipoic acid should not be stored on UV exposition. Application of electron paramagnetic resonance spectroscopy to characterize interactions of pharmacological substance with free radicals was confirmed.

Description: Copper antimony sulfide (CAS) is a relatively new class of sustainable absorber material, utilizing cost effective and abundant elements. Band gap engineered, modified CAS thin films were synthesized using electrodeposition and elevated temperature sulfurization approach. A testing analog of copper zinc antimony sulfide (CZAS) film-electrolyte interface was created in order to evaluate photoelectrochemical performance of the thin film of absorber materials. Eu3+/Eu2+ redox couple was selected for this purpose, based on its relative band offset with copper antimony sulfide. It was observed that zinc has a significant effect on CAS film properties. An enhanced photocurrent was observed for CAS film, modified with zinc addition. A detailed investigation has been carried out by changing stoichiometry, and corresponding surface and optical characterization results have been evaluated. A summary of favorable processing parameters of the films showing enhanced photoelectrochemical response is presented.

Description: Tidal influence and local morphology on circulation and salt transport are investigated in the Caeté river estuary, a well-mixed estuary along the north coast of Brazil. Velocity, temperature, and salinity data were collected in three different locations along the estuary’s main channel, over three single, 13 h tidal cycles. The aim of this study was to investigate the relationship between tidal distortion and salinity by using classical methods of comparison of three cross-channel circulation characteristics, as well as computation of salt flux and vertical mixing. Findings indicate a flood-ebb asymmetry in currents, due to the distinct funneling morphology of the estuary, with shallow marginal areas being dominant towards the estuary head, while both stratification and shear dominate near the estuary mouth. The tidal currents enhanced vertical diffusion in the mid- and lower reaches, explaining the prevailing weakly stratified conditions, while the dominant well-mixed conditions in the upper estuary are a result of a combination of stronger flood currents and negligible vertical saline gradient. The predominant downstream salt transport supports the conclusion that there is little accumulation of salt in the Caeté river estuary. In addition, findings indicate that tidal correlation and Stokes drift are important components in the upper estuary, while tidal correlation played an important role in the middle estuary, with fluvial discharge most important in the lower estuary.

Description: The present paper investigates the reliability analysis of industrial systems by using vague lambda-tau methodology in which information related to system components is uncertain and imprecise in nature. The uncertainties in the data are handled with the help of intuitionistic fuzzy set (IFS) theory rather than fuzzy set theory. Various reliability parameters are addressed for strengthening the analysis in terms of degree of acceptance and rejection of IFS. Performance as well as sensitivity analysis of the system parameter has been investigated for accessing the impact of taking wrong combinations on its performance. Finally results are compared with the existing traditional crisp and fuzzy methodologies results. The technique has been demonstrated through a case study of bleaching unit of a paper mill.

Description: A new stability-indicating reversed-phase high-performance thin-layer chromatographic (RP-HPTLC) method for densitometric analysis of thiocolchicoside was developed and validated. The chromatograms were developed using aluminum plates pre-coated with silica gel 60 RP-18 F254S as a stationary phase and methanol : water (70 : 30 ) as a mobile phase. The compact band for thiocolchicoside was observed at value of at an absorption wavelength of 377 nm. The linear regression data for the calibration plots () was found with respect to peak area in the concentration range of 100–600 ng per band. The limit of detection (LOD) and limit of quantification (LOQ) were 9.77 ng and 29.63 ng, respectively. The drug was exposed to acidic and alkaline hydrolysis, oxidation, photo degradation, and dry heat conditions. The peaks of degradation products were well-resolved from the peak of the standard drug with significantly different values. Statistical analysis proved that the established RP-HPTLC method is reproducible, selective, and accurate for the determination of thiocolchicoside in its formulations. The method can effectively separate the drug from its degradation products, and it can be considered as stability-indicating assay.

Description: In CdS/CdTe solar cells, chemical interdiffusion at the interface gives rise to the formation of an interlayer of the ternary compound . In this work, we evaluate the effects of this interlayer in CdS/CdTe photovoltaic cells in order to improve theoretical results describing experimental - (capacitance versus voltage) characteristics. We extended our previous theoretical methodology developed on the basis of three cardinal equations (Castillo-Alvarado et al., 2010). The present results provide a better fit to experimental data obtained from CdS/CdTe solar cells grown in our laboratory by the chemical bath deposition (for CdS film) and the close-spaced vapor transport (for CdTe film) techniques.

Description: A relationship between sea surface temperature (SST) and surface nitrate concentrations has been obtained for the first time based on in situ datasets retrieved from U.S. JGOFS (1991–96) and Indian cruises (2000–2006) in the Arabian Sea, Bay of Bengal and Indian Ocean region around the southern Indian tip. The dataset includes 1537 points. A sigmoid relationship obtained with

Description: The ice floe speed variations were monitored at the research camp North Pole 35 established on the Arctic ice pack in 2008. A three-month time series of measured speed values was used for determining changes in the kinetic energy of the drifting ice floe. The constructed energy distributions were analyzed by methods of nonextensive statistical mechanics based on the Tsallis statistics for open nonequilibrium systems, such as tectonic formations and drifting sea ice. The nonextensivity means the nonadditivity of externally induced energy changes in multicomponent systems due to dynamic interrelation of components having no structural links. The Tsallis formalism gives one an opportunity to assess the correlation between ice floe motions through a specific parameter, the so-called parameter of nonextensivity. This formalistic assessment of the actual state of drifting pack allows one to forecast some important trends in sea ice behavior, because the level of correlated dynamics determines conditions for extended mechanical perturbations in ice pack. In this work, we revealed temporal fluctuations of the parameter of nonextensivity and observed its maximum value before a large-scale sea ice fragmentation (faulting) of consolidated sea ice. The correlation was not detected in fragmented sea ice where long-range interactions are weakened.

Description: Symbiotic diatom-diazotrophic cyanobacteria association (DDA) of Rhizosolenia hebetata and Rhizosolenia formosa with endosymbiotic cyanobacteria Richelia intracellularis was noticed and documented for the first time during a bloom of the cyanobacterium Trichodesmium erythraeum in the oligotrophic shelf waters along Kochi and Mangalore transects, southeastern Arabian Sea (SEAS), during spring intermonsoon (April 2012). Although the host is frequently seen, the symbiont is rarely reported in the Indian EEZ. The presence of nitrogen-fixing symbiotic association of Rhizosolenia-Richelia along with Trichodesmium erythraeum highlights the significance of DDAs on the nutrient and energy budgets of phytoplankton in the oligotrophic environments of the Arabian Sea during spring intermonsoon.

Description: Recent studies on the diazotrophic cyanobacterium Trichodesmium showed that increasing CO2 partial pressure (pCO2) enhances N2 fixation and growth. We studied the in situ and satellite-derived environmental parameters within and outside a Trichodesmium bloom in the western coastal Bay of Bengal (BoB) during the spring intermonsoon 2009. Here we show that the single most important nitrogen fixer in today’s ocean, Trichodesmium erythraeum, is strongly abundant in high (≥300 μatm) pCO2 concentrations. N : P ratios almost doubled (~10) at high pCO2 region. This could enhance the productivity of N-limited BoB and increase the biological carbon sequestration. We also report presence of an oxygen minimum zone at Thamnapatnam. Earlier studies have been carried out using lab cultures, showing the increase in growth rate of T. erythraeum under elevated pCO2 conditions, but to our knowledge, this study is the first to report that in natural environment also T. erythraeum prefers blooming in high pCO2 concentrations. The observed CO2 sensitivity of T. erythraeum could thereby provide a strong negative feedback to rising atmospheric CO2 but would also drive towards phosphorus limitation in a future high CO2 world.

Description: In a silicon wafer-based photovoltaic (PV) module, significant power is lost due to current transport through the ribbons interconnecting neighbour cells. Using halved cells in PV modules is an effective method to reduce the resistive power loss which has already been applied by some major PV manufacturers (Mitsubishi, BP Solar) in their commercial available PV modules. As a consequence, quantitative analysis of PV modules using halved cells is needed. In this paper we investigate theoretically and experimentally the difference between modules made with halved and full-size solar cells. Theoretically, we find an improvement in fill factor of 1.8% absolute and output power of 90 mW for the halved cell minimodule. Experimentally, we find an improvement in fill factor of 1.3% absolute and output power of 60 mW for the halved cell module. Also, we investigate theoretically how this effect confers to the case of large-size modules. It is found that the performance increment of halved cell PV modules is even higher for high-efficiency solar cells. After that, the resistive loss of large-size modules with different interconnection schemes is analysed. Finally, factors influencing the performance and cost of industrial halved cell PV modules are discussed.

Description: In three-phase photovoltaic (PV) system, three-phase filter inductors are important part for the output electrical power quality. The comparison analyses of three-phase discrete filter inductors and two kinds of three-phase integrated filter inductors in three-phase PV inverter are proposed. Firstly, the three-phase PV inverter operation with discrete filter inductors is analyzed, and the design of discrete filter inductors is given; then operation of the three-phase PV inverter with three-phase integrated five-limb magnetic core filter inductors is analyzed, the design of integrated filter inductors with five-limb magnetic core is given, then the operation of three-phase PV inverter with three-phase integrated three-limb magnetic core filter inductors is analyzed, and the design of integrated filter inductors with three limbs magnetic core is given. The conclusion of comparison between three-phase discrete filter inductors and two kinds of three-phase integrated filter inductors is done; it means that the three-phase discrete filter inductors can achieve better output electrical power quality with lower power density and three-phase integrated filter inductors can achieve higher power density with lower output electrical power quality. Finally, the experiment results are given to compare the volume and filter effect of three kinds of filter inductors in three-phase PV inverter.

Description: A classical issue in many applied fields is to obtain an approximating surface to a given set of data points. This problem arises in Computer-Aided Design and Manufacturing (CAD/CAM), virtual reality, medical imaging, computer graphics, computer animation, and many others. Very often, the preferred approximating surface is polynomial, usually described in parametric form. This leads to the problem of determining suitable parametric values for the data points, the so-called surface parameterization. In real-world settings, data points are generally irregularly sampled and subjected to measurement noise, leading to a very difficult nonlinear continuous optimization problem, unsolvable with standard optimization techniques. This paper solves the parameterization problem for polynomial Bézier surfaces by applying the firefly algorithm, a powerful nature-inspired metaheuristic algorithm introduced recently to address difficult optimization problems. The method has been successfully applied to some illustrative examples of open and closed surfaces, including shapes with singularities. Our results show that the method performs very well, being able to yield the best approximating surface with a high degree of accuracy.

Description: This paper proposes a partial refactorization for faster nonlinear analysis based on sparse matrix solution, which is nowadays the default solution choice in finite element analysis and can solve finite element models up to millions degrees of freedom. Among various fill-in’s reducing strategies for sparse matrix solution, the graph partition is in general the best in terms of resultant fill-ins and floating-point operations and furthermore produces a particular graph of sparse matrix that prevents local change of entries from wide spreading in factorization. Based on this feature, an explicit partial triangular refactorization with local change is efficiently constructed with limited additional storage requirement in row-sparse storage scheme. The partial refactorization of the changed stiffness matrix inherits a big percentage of the original factor and is carried out only on partial factor entries. The proposed method provides a new possibility for faster nonlinear analysis and is mainly suitable for material nonlinear problems and optimization problems. Compared to full factorization, it can significantly reduce the factorization time and can make nonlinear analysis more efficient.

Description: Prediction of RNA structure is a useful process for creating new drugs and understanding genetic diseases. In this paper, we proposed a particle swarm optimization (PSO) and ant colony optimization (ACO) based framework (PAF) for RNA secondary structure prediction. PAF consists of crucial stem searching (CSS) and global sequence building (GSB). In CSS, a modified ACO (MACO) is used to search the crucial stems, and then a set of stems are generated. In GSB, we used a modified PSO (MPSO) to construct all the stems in one sequence. We evaluated the performance of PAF on ten sequences, which have length from 122 to 1494. We also compared the performance of PAF with the results obtained from six existing well-known methods, SARNA-Predict, RnaPredict, ACRNA, PSOfold, IPSO, and mfold. The comparison results show that PAF could not only predict structures with higher accuracy rate but also find crucial stems.

Description: The problem of robust fault tolerant control for continuous-time fractional-order (FO) systems with interval parameters and sensor faults of has been investigated. By establishing sensor fault model and state observer, an observer-based FO output feedback controller is developed such that the closed-loop FO system is asymptotically stable, not only when all sensor components are working well, but also in the presence of sensor components failures. Finally, numerical simulation examples are given to illustrate the application of the proposed design method.

Description: The rural/remote IMPROVE network (Interagency Monitoring of Protected Visual Environments) and the Environmental Protection Agency's urban Chemical Speciation Network have measured PM2.5 organic (OC) and elemental carbon (EC) since 1989 and 2000, respectively. We aggregated OC and EC data from 2007 to 2010 at over 300 sites from both networks in order to characterize the spatial and seasonal patterns in rural and urban carbonaceous aerosols. The spatial extent of OC and EC was more regional in the eastern United States relative to more localized concentrations in the West. The highest urban impacts of OC and EC relative to background concentrations occurred in the West during fall and winter. Urban and rural carbonaceous aerosols experienced a large (although opposite) range in seasonality in the West compared to a much lower seasonal variability in the East. Long-term (1990–2010) trend analyses indicated a widespread decrease in rural TC (TC = OC + EC) across the country, with positive, though insignificant, trends in the summer and fall in the West. Short-term trends indicated that urban and rural TC concentrations have both decreased since 2000, with the strongest and more spatially homogeneous urban and rural trends in the West relative to the East.

Description: The Doppler velocity dealiasing technique based on alias-robust VAD and variational (AR-Var) analyses developed at the National Severe Storms Laboratory for radar data quality control and assimilation is further improved in its two-step procedures: the reference check in the first step and the continuity check in the second step. In the first step, the alias-robust variational analysis is modified adaptively and used in place of the alias-robust velocity-azimuth display (VAD) analysis for all scan modes (rather than solely the WSR-88D volume coverage pattern 31 with the Nyquist velocity reduced below 12 m s−1 and the TDWR Mod80 with reduced below 15 m s−1), so more raw data can pass the stringent threshold conditions used by the reference check in the first step. This improves the dealiased data coverage without false dealiasing to better satisfy the high data quality standard required by radar data assimilation. In the second step, new procedures are designed and added to the continuity check to increase the dealiased data coverage over storm-scale areas threatened by intense mesocyclones and their generated tornados. The performances of the improved dealiasing technique versus the existing techniques are exemplified by the results obtained for tornadic storms scanned by the operational KTLX radar in Oklahoma.

Description: It is widely accepted that tumorigenesis is a multistep process characterized by the sequential accumulation of genetic alterations. However, the molecular basis of genomic instability in cancer is still partially understood. The observation that hereditary cancers are often characterized by mutations in DNA repair and checkpoint genes suggests that accumulation of DNA damage is a major contributor to the oncogenic transformation. It is therefore of great interest to identify all the cellular pathways that contribute to the response to DNA damage. Recently, RNA processing has emerged as a novel pathway that may contribute to the maintenance of genome stability. In this review, we illustrate several different mechanisms through which pre-mRNA splicing and genomic stability can influence each other. We specifically focus on the role of splicing factors in the DNA damage response and describe how, in turn, activation of the DDR can influence the activity of splicing factors.

Description: The components and claddings of low-rise buildings are usually destroyed first during typhoon disasters in coastal areas. Roof accessory structures can change the flow pattern on the roof, thus effectively reducing the wind load on the roof surface and the damage to the low-rise buildings. Three types of aerodynamic mitigation plates, that is, (1) 0.3 m high full-length roof-edge plate, (2) 0.3 m high and 0.5 m + 0.5 m long roof-corner plate, and (3) discrete roof-edge plates with different spaces (which can be used as advertisement boards), are studied on the basis of the field measurement results under roof pitches of 10° and 18.4°. By comparing the results of the roof with and without constructed plates, it is implied that the three types of plates can affect the formation of conical vortexes and can significantly reduce the mean and fluctuating pressure coefficients in the windward corner. Compared with the constructed plate, the roof ridge has a larger influence on the wind loads on leeward roof.

Description: Composite silicon dioxide-titanium dioxide (SiO2-TiO2) films are deposited on a large area of 15.6 × 15.6 cm2 textured multicrystalline silicon solar cells to increase the incident light trapped within the device. For further improvement of the antireflective coatings (ARCs) quality, dimethylformamide (DMF) solution is added to the original SiO2-TiO2 solutions. DMF solution solves the cracking problem, thus effectively decreasing reflectance as well as surface recombination. The ARCs prepared by sol-gel process and plasma-enhanced chemical vapor deposition (PECVD) on multicrystalline silicon substrate are compared. The average efficiency of the devices with improved sol-gel ARCs is 16.3%, only 0.5% lower than that of devices with PECVD ARCs (16.8%). However, from equipment depreciation point of view (the expiration date of equipment is generally considered as 5 years), the running cost (USD/watt) of sol-gel technique is 80% lower than that of PECVD method for the first five years and 66% lower than that of PECVD method from the start of the sixth year. This result proves that sol-gel-deposited ARCs process has potential applications in manufacturing low-cost, large-area solar cells.

Description: We study the lattice dynamical system of a nonlinear Boussinesq equation. We first verify the Lipschitz continuity of the continuous semigroup associated with the system. Then, we provide an estimation of the tail of the difference between two solutions of the system. Finally, we obtain the existence of an exponential attractor of the system.

Description: A novel scheme for fault-tolerant control is proposed in this paper, in which model reference adaptive control method is incorporated with control allocation to cope with simultaneous actuator failures, input saturation, and model mismatch in the flight system. In order to reduce performance degradation caused by actuator failures, the proposed scheme redistributes the control signal to healthy actuators and updates the weighting matrix based on actuator effectiveness. Because of saturation errors resulting from actuator constraints and model mismatch caused by abnormal changes in the system, the original reference model may not be appropriate. Under this circumstance, an adaptive reference model which can also provide satisfactory performance is designed. Simulations of a flight control example are given to illustrate the effectiveness of the proposed scheme.

Description: A virtual channels scheduling algorithm with broad applicability based on movable boundary is proposed. According to the types of date sources, transmission time slots are divided into synchronous ones and asynchronous ones with a movable boundary between them. During the synchronous time slots, the virtual channels are scheduled with a polling algorithm; during the asynchronous time slots, the virtual channels are scheduled with an algorithm based on virtual channel urgency and frame urgency. If there are no valid frames in the corresponding VC at a certain synchronous time slot, a frame of the other synchronous VCs or asynchronous VCs will be transmitted through the physical channel. Only when there are no valid frames in all VCs would an idle frame be generated and transmitted. Experiments show that the proposed algorithm yields much lower scheduling delay and higher channel utilization ratio than those based on unmovable boundary or virtual channel urgency in many kinds of sources. Therefore, broad applicability can be achieved by the proposed algorithm.

Description: Self-localization is a basic skill for mobile robots in the dynamic environments. It is usually modeled as a state estimation problem for nonlinear system with non-Gaussian noise and needs the real-time processing. Unscented particle filter (UPF) can handle the state estimation problem for nonlinear system with non-Gaussian noise; however the computation of UPF is very high. In order to reduce the computation cost of UPF and meanwhile maintain the accuracy, we propose an adaptive unscented particle filter (AUPF) algorithm through relative entropy. AUPF can adaptively adjust the number of particles during filtering to reduce the necessary computation and hence improve the real-time capability of UPF. In AUPF, the relative entropy is used to measure the distance between the empirical distribution and the true posterior distribution. The least number of particles for the next step is then decided according to the relative entropy. In order to offset the difference between the proposal distribution, and the true distribution the least number is adjusted thereafter. The ideal performance of AUPF in real robot self-localization is demonstrated.

Description: With the water and soil conservation forests of Robinia pseudoacacia in the Malian beach of Hongqi farm, Ji County, Shanxi province, as the research object, this study estimated the potential evapotranspiration in the open space outside the forest and at the heights of 3 m, 6 m, and 10 m in the forests with the climate data during 2011-2012 and the upgraded Penman-Monteith formula; then, this study explored the microclimate characteristics inside and outside the Robinia pseudoacacia forest and thereafter revealed the vertical variation rules of potential evapotranspiration of Robinia pseudoacacia. The results indicate that the air temperature, relative humidity, wind speed, and potential evapotranspiration at different heights above the ground surface showed similar changing trends, but with some variation during different periods. In addition, the weather also had impacts on the potential evapotranspiration. In April, July, and October, the change of potential evapotranspiration of the Robinia pseudoacacia forests showed a bimodal curve in the sunny days and rainy days, while it showed a single-peak curve with quite small fluctuation in the rainy days. However, it showed a single-peak pattern even in the sunny days in January, and it showed no fluctuation in the snowy days in January.

Description: Cooperative communications that take advantage of the broadcasting nature of wireless environments can help to increase system throughput in wireless ad hoc networks. However, the promised throughput might be lost in presence of the error transmission and the interference caused by relay transmission in cooperative communication. In this paper, we introduced the relay selection schemes that can control the interference at the relay to prevent the relay that may harm other pairs. Then, we proposed the throughput-optimal scheduling that takes into account error probability in decision and maximizes throughput, that is, the amount of packets transmitted without error in network. In addition, we derive a simple and lightweight framework to implement the proposed policy in distributed manner. The simulation results show that the proposed scheduling policy outperforms the noncooperative policy and multihop relay policy.

Description: This paper is the second in a series of papers considering symmetry properties of bosonic quantum systems over 2D graphs, with continuous spins, in the spirit of the Mermin-Wagner theorem. In the model considered here the phase space of a single spin is where is a -dimensional unit torus with a flat metric. The phase space of spins is , the subspace of formed by functions symmetric under the permutations of the arguments. The Fock space yields the phase space of a system of a varying (but finite) number of particles. We associate a space with each vertex of a graph satisfying a special bidimensionality property. (Physically, vertex represents a heavy “atom” or “ion” that does not move but attracts a number of “light” particles.) The kinetic energy part of the Hamiltonian includes (i) , the minus a half of the Laplace operator on , responsible for the motion of a particle while “trapped” by a given atom, and (ii) an integral term describing possible “jumps” where a particle may join another atom. The potential part is an operator of multiplication by a function (the potential energy of a classical configuration) which is a sum of (a) one-body potentials , , describing a field generated by a heavy atom, (b) two-body potentials , , showing the interaction between pairs of particles belonging to the same atom, and (c) two-body potentials , , scaled along the graph distance between vertices , which gives the interaction between particles belonging to different atoms. The system under consideration can be considered as a generalized (bosonic) Hubbard model. We assume that a connected Lie group acts on , represented by a Euclidean space or torus of dimension , preserving the metric and the volume in . Furthermore, we suppose that the potentials , , and are -invariant. The result of the paper is that any (appropriately defined) Gibbs states generated by the above Hamiltonian is -invariant, provided that the thermodynamic variables (the fugacity and the inverse temperature ) satisfy a certain restriction. The definition of a Gibbs state (and its analysis) is based on the Feynman-Kac representation for the density matrices.

Description: One-dimensional second-order hyperbolic telegraph equation was formulated using Ohm’s law and solved by a recent and reliable semianalytic method, namely, the reduced differential transform method (RDTM). Using this method, it is possible to find the exact solution or a closed approximate solution of a differential equation. Three numerical examples have been carried out in order to check the effectiveness, the accuracy, and convergence of the method. The RDTM is a powerful mathematical technique for solving wide range of problems arising in science and engineering fields.

Description: We prove a common fixed point theorem for two pairs of compatible and subsequentially continuous (alternately subcompatible and reciprocally continuous) mappings satisfying a general contractive condition in a metric space. Some illustrative examples are furnished to highlight the realized improvements. Our result improves the main result of Sedghi and Shobe (2007).

Description: In this paper, the biostratigraphy and sequence stratigraphy of marine Paleogene deposits from the Kopet-Dagh basin (NE of Iran) are described. Particularly the absence of Morozovella genus is discussed. In addition, the Paleocene/Eocene boundary has been studied in detail using the record of planktonic and larger benthic foraminifera. This boundary is located probably within a thin red horizon (~10–15 cm) representing a paleosoil. Close to this boundary is located the base of the calcareous test dissolution interval, with the dominance of agglutinated benthic foraminifera and with a sudden decrease in the richness of benthic foraminiferal species. Biostratigraphic studies led to the identification of 33 genera of larger benthic foraminifera and 5 genera of planktonic foraminifera. Petrographical studies indicate that these sediments, consisting of four carbonate lithofacies (15 subfacies), may have been deposited on a shallow carbonate platform (ramp type). These lithofacies have been deposited in open marine, shoal, lagoon, and tidal flat environmental conditions. Sequence stratigraphic analysis led to the identification of four third-order depositional sequences. The interpreted sea-level curve in the Kopet-Dagh basin can be correlated with Paleocene-Eocene global curves, with a sea-level fall in the latest Paleocene, followed by a sea-level rise in the earliest Eocene.

Description: In an effort to investigate a possible relation between geometry and information, we establish a relation of the Ricci scalar in the Robertson-Walker metric of the cosmological Friedmann model to the number of information and entropy . This is with the help of a previously derived result that relates the Hubble parameter to the number of information . We find that the Ricci scalar has a dependence which is inversely proportional to the number of information and entropy . Similarly, a nonzero number of information would imply a finite Ricci scalar, and therefore space time will unfold. Finally, using the maximum number of information existing in the universe, we obtain a numerical value for the Ricci scalar to be .

Description: Continuous deployment of antifungals in treating infections caused by dimorphic opportunistic pathogen Candida albicans has led to the emergence of drug resistance resulting in cross-resistance to many unrelated drugs, a phenomenon termed multidrug resistance (MDR). Despite the current understanding of major factors which contribute to MDR mechanisms, there are many lines of evidence suggesting that it is a complex interplay of multiple factors which may be contributed by still unknown mechanisms. Coincidentally with the increased usage of antifungal drugs, the number of reports for antifungal drug resistance has also increased which further highlights the need for understanding novel molecular mechanisms which can be explored to combat MDR, namely, ROS, iron, hypoxia, lipids, morphogenesis, and transcriptional and signaling networks. Considering the worrying evolution of MDR and significance of C. albicans being the most prevalent human fungal pathogen, this review summarizes these new regulatory mechanisms which could be exploited to prevent MDR development in C. albicans as established from recent studies.

Description: Location estimation for object tracking is one of the important topics in the research of wireless sensor networks (WSNs). Recently, many location estimation or position schemes in WSN have been proposed. In this paper, we will propose the procedure and modeling of location estimation for object tracking in WSN. The designed modeling is a simple scheme without complex processing. We will use Matlab to conduct the simulation and numerical analyses to find the optimal modeling variables. The analyses with different variables will include object moving model, sensing radius, model weighting value α, and power-level increasing ratio k of neighboring sensor nodes. For practical consideration, we will also carry out the shadowing model for analysis.

Description: This paper investigates the stability analysis problem for a class of discrete-time networked control systems (NCSs) with random time delays and packet dropouts based on unified Markov jump model. The random time delays and packet dropouts existed in feedback communication link are modeled by two independent Markov chains; the resulting closed-loop system is described by a new Markovian jump linear system (MJLS) with Markov delays. Sufficient conditions of the stochastic stability for NCSs is obtained by constructing a novel Lyapunov functional, and the mode-dependent output feedback controller design method is presented based on linear matrix inequality (LMI) technique. A numerical example is given to illustrate the effectiveness of the proposed method.

Description: The rate-dependent hysteresis in giant magnetostrictive materials is a major impediment to the application of such material in actuators. In this paper, a relevance vector machine (RVM) model is proposed for describing the hysteresis nonlinearity under varying input current. It is possible to construct a unique dynamic model in a given rate range for a rate-dependent hysteresis system using the sinusoidal scanning signals as the training set input signal. Subsequently, a proportional integral derivative (PID) control scheme combined with a feedforward compensation is implemented on a giant magnetostrictive actuator (GMA) for real-time precise trajectory tracking. Simulations and experiments both verify the effectiveness and the practicality of the proposed modeling and control methods.

Description: Unlike its saturated counterparts, the mechanical behavior of an unsaturated soil depends not only upon its stress history but also upon its hydraulic history. In this paper, a soil-water characteristic relationship which is capable of describing the effect of capillary hysteresis is introduced to characterize the influence of hydraulic history on the skeletal deformation. The capillary hysteresis is viewed as a phenomenon associated with the internal structural rearrangements in unsaturated soils, which can be characterized by using a set of internal state variables. It is shown that both capillary hysteresis and plastic deformation can be consistently addressed in a unified theoretical framework. Within this context, a constitutive model of unsaturated soils is developed by generalizing the modified Cam-Clay model. A hardening function is introduced, in which both the matric suction and the degree of saturation are explicitly included as hardening variables, so that the effect of hydraulic history on the mechanical response can be properly addressed. The proposed model is capable of capturing the main features of the unsaturated soil behavior. The new model has a hierarchical structure, and, depending upon application, it can describe the stress-strain relation and the soil-water characteristics in a coupled or uncoupled manner.

Description: A new method for parameter sensitivity analysis of Lorenz equations is presented. The sensitivity equations are derived based on the staggered methods. Experimental results indicate that it is possible to determine effects of parameters on model variables so that we can eliminate the less effective ones. Robustness can also be verified in some confidence intervals by simply looking at the corresponding phase portraits. This enables us to control the system. Although the stability properties of the Lorenz equations are studied extensively, to the best knowledge of the authors, the PSA of Lorenz equations has not been considered which is the main goal of this paper.

Description: This paper addresses the problem of simultaneous identification of linear discrete time delay multivariable systems. This problem involves both the estimation of the time delays and the dynamic parameters matrices. In fact, we suggest a new formulation of this problem allowing defining the time delay and the dynamic parameters in the same estimated vector and building the corresponding observation vector. Then, we use this formulation to propose a new method to identify the time delays and the parameters of these systems using the least square approach. Convergence conditions and statistics properties of the proposed method are also developed. Simulation results are presented to illustrate the performance of the proposed method. An application of the developed approach to compact disc player arm is also suggested in order to validate simulation results.

Description: Boundary layer flow through a porous medium over a stretching porous wall has seen solved with analytical solution. It has been considered two wall boundary conditions which are power-law distribution of either wall temperature or heat flux. These are general enough to cover the isothermal and isoflux cases. In addition to momentum, both first and second laws of thermodynamics analyses of the problem are investigated. The governing equations are transformed into a system of ordinary differential equations. The transformed ordinary equations are solved analytically using homotopy analysis method. A comprehensive parametric study is presented, and it is shown that the rate of heat transfer increases with Reynolds number, Prandtl number, and suction to the surface.

Description: This study carries out numerical simulations to identify the magnitude of prestress force in a highway bridge by making use of the dynamic responses from moving vehicular loads. The prestressed bridges are modeled using four-node isoparametric flat shell element taking into account the transverse shearing deformation in the finite element model. The vehicle is modeled as a multiple degrees-of-freedom system. An approach based on dynamic response sensitivity-based finite element model updating is proposed to identify the elemental prestress force. The identified results are obtained iteratively with the penalty function method with regularization from the measured structural dynamic responses. A single-span prestressed Tee beam and two-span prestressed box-girder bridge are studied as two numerical examples. The effects of road surface roughness, measurement noise, and speed of moving vehicle on the identification results are investigated. Studies indicate that the proposed method is efficient and robust for prestress force identification. Good identified results can be obtained from several measured acceleration responses.

Description: This paper presents a novel way to formulate the triangular flat shell element. The basic analytical solutions of membrane and bending plate problem for anisotropy material are studied separately. Combining with the conforming displacement along the sides and hybrid element strategy, the triangular flat shell elements based on the analytical trial functions (ATF) for anisotropy material are formulated. By using the explicit integral formulae of the triangular element, the matrices used in proposed shell element are calculated efficiently. The benchmark examples showed the high accuracy and high efficiency.

Description: Considering the filtering problem of dynamic positioning (DP) ship for the slowly varying sea state, a multiple model adaptive observer (MMAO) for dynamic positioning ship is presented. The MMAO consists of a bank of nonlinear subobserver and a dynamic weighting signal generator, in which each sub-observer is designed based on different peak frequency of wave spectrum model. To improve the performance of the observer, subobserver using the measurement of position, velocity, and acceleration is used to update the estimated velocity of ship. The observer parameters are optimized using particle swarm optimization (PSO). Finally, the method is verified effective by the computer simulation.

Description: A dual fractal reservoir transient flow model was created by embedding a fracture system simulated by a tree-shaped fractal network into a matrix system simulated by fractal porous media. The dimensionless bottom hole pressure model was created using the Laplace transform and Stehfest numerical inversion methods. According to the model's solution, the bilogarithmic type curves of the dual fractal reservoirs are illustrated, and the influence of different fractal factors on pressure transient responses is discussed. This semianalytical model provides a practical and reliable method for empirical applications.

Description: A green, simple, and stability-indicating RP-HPLC method was developed for the determination of diltiazem in topical preparations. The separation was based on a C18 analytical column using a mobile phase consisted of ethanol: phosphoric acid solution (pH = 2.5) (35 : 65, v/v). Column temperature was set at 50°C and quantitation was achieved with UV detection at 240 nm. In forced degradation studies, the drug was subjected to oxidation, hydrolysis, photolysis, and heat. The method was validated for specificity, selectivity, linearity, precision, accuracy, and robustness. The applied procedure was found to be linear in diltiazem concentration range of 0.5–50 μg/mL (). Precision was evaluated by replicate analysis in which % relative standard deviation (RSD) values for areas were found below 2.0. The recoveries obtained (99.25%–101.66%) ensured the accuracy of the developed method. The degradation products as well as the pharmaceutical excipients were well resolved from the pure drug. The expanded uncertainty (5.63%) of the method was also estimated from method validation data. Accordingly, the proposed validated and sustainable procedure was proved to be suitable for routine analyzing and stability studies of diltiazem in pharmaceutical preparations.

Description: An accelerated multilevel aggregation method is presented for calculating the stationary probability vector of an irreducible stochastic matrix in PageRank computation, where the vector extrapolation method is its accelerator. We show how to periodically combine the extrapolation method together with the multilevel aggregation method on the finest level for speeding up the PageRank computation. Detailed numerical results are given to illustrate the behavior of this method, and comparisons with the typical methods are also made.

Description: This paper numerically investigates the magnetohydrodynamic boundary layer flow with heat and mass transfer of an incompressible upper-convected Maxwell fluid over a stretching sheet in the presence of viscous dissipation and thermal radiation as well as chemical reaction. The governing partial differential equations are transformed into a system of ordinary differential equations by using suitable similarity transformations. The resultant highly nonlinear ordinary differential equations are then solved using spectral relaxation method. The results are obtained for velocity, temperature, concentration, skin friction, and Nusselt number. The effects of various material parameters on the flow with heat and mass transfer and the dimensionless variables are illustrated graphically and briefly discussed.

Description: A novel preference ranking organization method by similarity to ideal solution (PROMSIS) vertical handoff algorithm is proposed for heterogeneous wireless networks, and its essential idea includes the preference structure of the PROMETHEE and the concept of Euclid distance of the TOPSIS. Four 3GPP defined traffic classes are considered in performance evaluation. An attribute matrix is constructed considering some major attributes. Handoff decision meeting multiattribute QoS requirement is made according to the traffic features. The weight relation of decision elements is determined with the least square (LS) approach. The final decision is made using the proposed PROMSIS algorithm based on the attribute matrix and weight vector. The simulation results have manifested that the proposed PROMSIS algorithm can provide satisfactory vertical handoff performance, and the LS-PROMSIS algorithm can be fit to the characteristics of the traffic.

Description: Recently, in 2013, we proved that certain presentations present the Dunwoody -manifold groups. Since the Dunwoody -manifolds do not have a unique Heegaard diagram, we cannot determine a unique group presentation for the Dunwoody -manifolds. It is well known that every -knots in a lens space can be represented by the set of the 4-tuples (Cattabriga and Mulazzani (2004); S. H. Kim and Y. Kim (2012, 2013)). In particular, to determine a unique Heegaard diagram of the Dunwoody -manifolds, we proved the fact that the certain subset of representing all -bridge knots of -knots is determined completely by using the dual and mirror -decompositions (S. H. Kim and Y. Kim (2011)). In this paper, we show how to obtain the dual and mirror images of all elements in as the generalization of some results by Grasselli and Mulazzani (2001); S. H. Kim and Y. Kim (2011).

Description: The Exp-function method combined with -expansion method is employed to investigate the equation with -dependent coefficients. The solitary wave solutions and periodic wave solutions to the equation are constructed analytically under certain circumstances. The results presented in this paper improve the previous results.

Description: The use of liquefied petroleum gas (LPG) is experimented with to improve the performance of a dual fuel compression ignition (CI) engine running on Karanja oil methyl ester (KOME) blends. Diesel is used as a reference fuel for the dual fuel engine results. During the experimentation, the engine performance is measured in terms of brake thermal efficiency (BTE) and brake specific fuel consumption (BSFC), and exhaust emission is measured in terms of carbon monoxide (CO), hydrocarbon (HC), and oxides of nitrogen (). Dual fuel engine with LPG showed a reduction in and smoke emission; however, it suffers from high HC and CO emission, particularly, at lower loads due to poor ignition. Comparison of performance and emissions is done for diesel and blends of KOME. Results showed that using KOME blends (10% and 20%) has improved the CI engine performance with a reduction in HC and CO emissions.

Description: Recently, a new fruit fly optimization algorithm (FOA) is proposed to solve optimization problems. In this paper, we empirically study the performance of FOA. Six different nonlinear functions are selected as testing functions. The experimental results illustrate that FOA cannot solve complex optimization problems effectively. In order to enhance the performance of FOA, an improved FOA (named LGMS-FOA) is proposed. Simulation results and comparisons of LGMS-FOA with FOA and other metaheuristics show that LGMS-FOA can greatly enhance the searching efficiency and greatly improve the searching quality.

Description: A model of solid-water-air coupling in triphasic mixtures is compared with solid-water coupling in biphasic mixtures with an application to partially saturated porous media. Based on thermodynamics, the mathematical framework governing the behavior of a partially saturated soil is derived using balance equations, and the numerical implementation and drainage tests of a soil column are carried out to validate the obtained formulations. The role of the air phase in the hydro-mechanical behavior of triphasic mixtures can be analyzed from the interactions among multiple phases for the constitutive behavior of a solid skeleton, and the triphasic mixture model can be applied in geotechnical engineering problems, such as sequestration and air storage in aquifers.

Description: In the new decade, green investment decisions are attracting more interest in design supply chains due to the hidden economic benefits and environmental legislative barriers. In this paper, a supply chain network design problem with both economic and environmental concerns is presented. Therefore, a multiobjective optimization model that captures the trade-off between the total logistics cost and CO2 emissions is proposed. With regard to the complexity of logistic networks, a new multiobjective swarm intelligence algorithm known as a multiobjective Gravitational search algorithm (MOGSA) has been implemented for solving the proposed mathematical model. To evaluate the effectiveness of the model, a comprehensive set of numerical experiments is explained. The results obtained show that the proposed model can be applied as an effective tool in strategic planning for optimizing cost and CO2 emissions in an environmentally friendly automotive supply chain.

Description: This paper investigates the sampled-data stabilization problem of spacecraft relative positional holding with improved Lyapunov function approach. The classical Clohessy-Wiltshire equation is adopted to describe the relative dynamic model. The relative position holding problem is converted into an output tracking control problem using sampling signals. A time-dependent discontinuous Lyapunov functionals approach is developed, which will lead to essentially less conservative results for the stability analysis and controller design of the corresponding closed-loop system. Sufficient conditions for the exponential stability analysis and the existence of the proposed controller are provided, respectively. Finally, a simulation result is established to illustrate the effectiveness of the proposed control scheme.

Description: Cloud computing has become a popular topic for exploration in both academic and industrial research in recent years. In this paper, network behavior is analyzed to assess and compare the costs and risks associated with traditional local servers versus those associated with cloud computing to determine the appropriate deployment strategy. An analytic framework of a deployment strategy that involves two mathematical models and the analytical hierarchy process is proposed to analyze the costs and service level agreements of services involving using traditional local servers and platform as service platforms in the cloud. Two websites are used as test sites to analyze the costs and risks of deploying services in Google App Engine (GAE) (1) the website of Information and Finance of Management (IFM) at the National Chiao Tung University (NCTU) and (2) the NCTU website. If the examined websites were deployed in GAE, NCTU would save over 83.34% of the costs associated with using a traditional local server with low risk. Therefore, both the IFM and NCTU websites can be served appropriately in the cloud. Based on this strategy, a suggestion is proposed for managers and professionals.

Description: Meshing quality of the discrete model influences the accuracy, convergence, and efficiency of the solution for fractured network system in geological problem. However, modeling and meshing of such a fractured network system are usually tedious and difficult due to geometric complexity of the computational domain induced by existence and extension of fractures. The traditional meshing method to deal with fractures usually involves boundary recovery operation based on topological transformation, which relies on many complicated techniques and skills. This paper presents an alternative and efficient approach for meshing fractured network system. The method firstly presets points on fractures and then performs Delaunay triangulation to obtain preliminary mesh by point-by-point centroid insertion algorithm. Then the fractures are exactly recovered by local correction with revised dynamic grid deformation approach. Smoothing algorithm is finally applied to improve the quality of mesh. The proposed approach is efficient, easy to implement, and applicable to the cases of initial existing fractures and extension of fractures. The method is successfully applied to modeling of two- and three-dimensional discrete fractured network (DFN) system in geological problems to demonstrate its effectiveness and high efficiency.

Description: This work presents a study of the possibility for extending the well-known results of E. Verlinde concerning the entropic nature of gravity to the ultraviolet region (Planck’s energies) and also the derivation of quantum corrections to Einstein Equations.

Description: Ad hoc social networks are special social networks, such as ad hoc tactical social networks, ad hoc firefighter social networks, and ad hoc vehicular social networks. The social networks possess both the properties of ad hoc network and social network. One of the challenge problems in ad hoc social networks is opinion impact and consensus, and the opinion impact plays a key role for information fusion and decision support in ad hoc social networks. In this paper, consider the impact of physical and logical distance on the opinions of individuals or nodes in heterogeneous social networks; we present a general opinion impact model, discuss the local and global opinion impact models in detail, and point out the relationship between the local opinion impact model and the global opinion impact model. For understanding the opinion impact models easily, we use the general opinion impact model to ad hoc tactical social networks and discuss the opinion impact and opinion consensus for ad hoc tactical social networks in the end.

Description: n-type ZnO:Cu photoanodes were fabricated by simple spray pyrolysis deposition technique. Influence of low concentration (range ~10−4–10−1%) of Cu doping in hexagonal ZnO lattice on its photoelectrochemical performance has been investigated. The doped photoanodes displayed 7-time enhanced conversion efficiencies with respect to their undoped counterpart, as estimated from the photocurrents generated under simulated solar radiation. This is the highest enhancement in the solar conversion efficiency reported so far for the Cu-doped ZnO. This performance is attributed to the red shift in the band gap of the Cu-doped films and is in accordance with the incident-photon-current-conversion efficiency (IPCE) measurements. Electrochemical studies reveal an n-type nature of these photoanodes. Thus, the study indicates a high potential of doped ZnO films for solar energy applications, in purview of the development of simple nanostructuring methodologies.

Description: Spatial competition plays important roles in economics, which attracts extensive research. This paper addresses spatial competitions along with horizontal product differentiations and entry deterrence. By the dynamic game theory model about one firm and a potential entrant with different cost in a linear city, this paper finds that both the higher fixed setup cost and the higher transportation cost deter entrants. To efficiently deter the entrants, the establisher is inclined to locating at the middle point of the linear city.

Description: We present several iterations for preconditioners introduced by Tarazaga and Cuellar (2009), and study the convergence of the method for solving a linear system whose coefficient matrix is positive definite matrices, and we also find that they complete very well with the SOR iteration, which is shown through numerical examples.

Description: With the rise in popularity of e-books, there is a growing need to reexamine the pricing strategy in the e-book supply chain. In this paper, we study two forms of pricing models widely used in the book industry: wholesale and agency pricing models. We first assume a stylized deterministic demand model in which the demand depends on the price, the degree of substitution, and the overall market potential. Subsequently, we employ the game theory to determine the price equilibriums and profit distribution under different pricing models. Finally, we explore the behavior of the publisher and the retailer under different preferences and degrees of substitution through a computational study. Our findings indicate that the e-book price will be lower under the agency pricing model than under the wholesale pricing model, which is counterintuitive. The publishers have higher incentives to adopt the agency pricing model than the wholesale pricing model. The agency pricing model benefits the whole system and can provide readers with books at lower prices. The degree of substitution between the two forms of books and the readers’ preference toward e-book will affect the books’ price and the profit distribution between the publisher and the retailers.

Description: The coupled momentum and heat transfer in unsteady, incompressible flow along a semi-infinite vertical porous moving plate adjacent to an isotropic porous medium with viscous dissipation effect are investigated. The Darcy-Forchheimer nonlinear drag force model which includes the effects of inertia drag forces is employed. The governing differential equations of the problem are transformed into a system of nondimensional differential equations which are solved numerically by the finite element method (FEM). The non-dimensional velocity and temperature profiles are presented for the influence of Darcy number, Forchheimer number, Grashof number, Eckert number, Prandtl number, plate velocity, and time. The Nusselt number is also evaluated and compared with finite difference method (FDM), which shows excellent agreement.

Description: Grouting technology has been widely used in all fields of geotechnical and civil engineering. Prospective engineering objectives including reinforcement of rock mass and groundwater leakage treatment can be achieved by grouting which will change the mechanical parameters of rock mass such as strength, elastic modulus, and coefficient of permeability. In this paper, rock mass is assumed as a composite material consisting of rock particles and random microcracks initially. Since part or all of the cracks will be filled with cement slurry after grouting, rock mass consists of rock particles, grout condensate, and some or no random microcracks after grouting. The damage constitutional law of the mesoscopic element is established based on the theory of mesoscopic damage mechanics. With the heterogeneity of the components of rock mass considered, the variation of mechanical characteristics of rock mass is studied before and after grouting. And the influence mechanism of grouting on rock mass is investigated at mesoscale level.

Description: We are concerned with the Cauchy problem connected with the Helmholtz equation. We propose a numerical method, which is based on the Helmholtz representation, for obtaining an approximate solution to the problem, and then we analyze the convergence and stability with a suitable choice of regularization method. Numerical experiments are also presented to show the effectiveness of our method.

Description: This paper is devoted to robust output feedback tracking control design for a class of switched nonlinear cascade systems. The main goal is to ensure the global input-to-state stable (ISS) property of the tracking error nonlinear dynamics with respect to the unknown structural system uncertainties and external disturbances. First, a nonlinear observer is constructed through state transformation to reconstruct the unavailable states, where only one parameter should be determined. Then, by virtue of the nonlinear sliding mode control (SMC), a discontinuous nonlinear output feedback controller is designed using a backstepping like design procedure to ensure the ISS property. Finally, an example is provided to show the effectiveness of the proposed approach.

Description: Adjusting and controlling the relative humidity (RH) inside package is crucial for ensuring the quality of modified atmosphere packaging (MAP) of fresh produce. In this paper, an improved kinetic model for predicting the RH in MAP was developed. The model was based on heat exchange and gases mass transport phenomena across the package, gases heat convection inside the package, and mass and heat balances accounting for the respiration and transpiration behavior of fresh produce. Then the model was applied to predict the RH in MAP of fresh Lentinula edodes (one kind of Chinese mushroom). The model equations were solved numerically using Adams-Moulton method to predict the RH in model packages. In general, the model predictions agreed well with the experimental data, except that the model predictions were slightly high in the initial period. The effect of the initial gas composition on the RH in packages was notable. In MAP of lower oxygen and higher carbon dioxide concentrations, the ascending rate of the RH was reduced, and the RH inside packages was saturated slowly during storage. The influence of the initial gas composition on the temperature inside package was not much notable.

Description: With the growing interest in ubiquitous technologies recently, many studies have been conducted in order to manage wireless sensor network, which is the central component in ubiquitous environment. To manage a certain wireless sensor network, a variety of techniques can be applied and thereby the network can be managed. However, it is very complicated and time-consuming to incorporate and manage more than a heterogeneous wireless sensor network since each network has different data, meanings, and terms. Instead of conducting verification through examining the detailed technology or simulation in order to manage a variety of wireless sensor networks, we suggest a methodology which manages data coming from the various sensors mentioned above, a technique by which those data from various sensor networks are managed in each different network, and a methodology which manages sensor networks where management languages exist. This paper defined the network-related terminology using Protégé for the tools and definitions necessary for ontology-based methodology, thereby defined OWL and the related rules, and suggested a methodology for incorporated management. In addition, this study showed that the methodology presented in this study has expandability and it can incorporate and manage a variety of wireless sensor networks.

Description: The problem of restricted three bodies is considered. The treatment is carried out within the framework of the post-Newtonian approximation. The primaries also are assumed to be radiant sources. The locations of the collinear points are computed. Series forms of these locations are obtained as new results. A Mathematica program is constructed so as to draw the locations of collinear points versus the whole range of the mass ratio taking into account the photo-gravitational effects and/or the relativistic corrections. Analyses of these figures are addressed.

Description: I discuss briefly in this review, dedicated to the centenary of the birth of the great neutrino physicist Bruno Pontecorvo, the following ideas he proposed: (i) the radiochemical method of neutrino detection; (ii) the universality of the weak interaction; (iii) the accelerator neutrino experiment which allowed to prove that muon and electron neutrinos are different particles (the Brookhaven experiment). I consider in some details Pontecorvo's pioneering idea of neutrino masses, mixing, and oscillations and the development of this idea by Pontecorvo, by Pontecorvo and Gribov, and by Pontecorvo and myself.

Description: Low-mass dilepton spectra as measured in high-energy heavy-ion collisions are a unique tool to obtain spectroscopic information about the strongly interacting medium produced in these reactions. Specifically, in-medium modifications of the vector spectral function, which is well known in the vacuum, can be deduced from the thermal radiation off the expanding QCD fireball. This, in particular, allows to investigate the fate of the resonance in the dense medium and possibly infer from it signatures of the (partial) restoration of chiral symmetry, which is spontaneously broken in the QCD vacuum. After briefly reviewing calculations of thermal dilepton emission rates from hot QCD matter, utilizing effective hadronic theory, lattice QCD, or resummed perturbative QCD, we focus on applications to dilepton spectra at heavy-ion collider experiments at RHIC and LHC. This includes invariant-mass spectra at full RHIC energy with transverse-momentum dependencies and azimuthal asymmetries, as well as a systematic investigation of the excitation function down to fixed-target energies, thus making contact to previous precision measurements at the SPS. Furthermore, predictions for the energy frontier at the LHC are presented in both dielectron and dimuon channels.

Description: Agricultural soils in the tropics have undergone significant declines in their native carbon stock through the long-term use of extractive farming practices. However, these soils have significant capacity to sequester CO2 through the implementation of improved land management practices. This paper reviews the published and grey literature related to the influence of improved land management practices on soil carbon stock in the tropics. The review suggests that the implementation of improved land management practices such as crop rotation, no-till, cover crops, mulches, compost, or manure can be effective in enhancing soil organic carbon pool and agricultural productivity in the tropics. The benefits of such amendments were, however, often short-lived, and the added organic matters were usually mineralized to CO2 within a few cropping seasons leading to large-scale leakage. We found that management of black carbon (C), increasingly referred to as biochar, may overcome some of those limitations and provide an additional soil management option. Under present circumstances, recommended crop and land management practices are inappropriate for the vast majority of resource constrained smallholder farmers and farming systems. We argue that expanding the use of biochar in agricultural lands would be important for sequestering atmospheric CO2 and mitigating climate change, while implementing the recommended crop and land management practices in selected areas where the smallholder farmers are not resource constrained.

Description: This study presents wavelets-computational aspects of Sterian-realistic approach to uncertainty principle in high energy physics. According to this approach, one cannot make a device for the simultaneous measuring of the canonical conjugate variables in reciprocal Fourier spaces. However, such aspects regarding the use of conjugate Fourier spaces can be also noticed in quantum field theory, where the position representation of a quantum wave is replaced by momentum representation before computing the interaction in a certain point of space, at a certain moment of time. For this reason, certain properties regarding the switch from one representation to another in these conjugate Fourier spaces should be established. It is shown that the best results can be obtained using wavelets aspects and support macroscopic functions for computing (i) wave-train nonlinear relativistic transformation, (ii) reflection/refraction with a constant shift, (iii) diffraction considered as interaction with a null phase shift without annihilation of associated wave, (iv) deflection by external electromagnetic fields without phase loss, and (v) annihilation of associated wave-train through fast and spatially extended phenomena according to uncertainty principle.

Description: The energy cost of a rail transport system is very big especially for the tractions of trains in its daily operation. Continual effort on decreasing the traction energy cost intensities of various rail transport modes has been made by many researchers and practitioners on different aspects for a long time. From the rail transport operation perspective, this study reviews such energy-saving research mainly focusing on the optimizations of train coasting schemes, the rational designs and utilizations of track alignments, the ameliorations of train attributes, and the improvements of system operations. According to the review work, it is confirmed that in sound responses to distinct track alignments, dynamically optimizing control programs of trains with their reasonably improved attributes ought to be further studied in view of the systematic transport operation of a rail line or network in an integrated manner as much as possible in the future research on traction energy saving of rail transport.

Description: Entropy creation in multiparticle system is investigated by analysing the experimental data on ion-ion collisions at AGS and SPS energies and the results thus obtained are compared with those predicted by multiphase transport and correlation-free Monte Carlo models. Entropies produced in limited- and full-phase space are observed to increase with increasing beam energy. The entropy values, normalized to the maximum rapidity and plotted against pseudorapidity (bin width also normalized to the maximum rapidity), are found to be energy independent, exhibiting a kind of entropy scaling. Such scaling is observed in the full phase space as well as in the regions confined to the forward or backward hemispheres. The findings also reveal that there exist strong correlations amongst the particles produced in the forward and backward hemispheres around the midrapidity. These correlations are found to be of short range in nature, and the contributions from the long-range correlations seem to be absent. PACS numbers: 25.75-q, 25.75.Gz.

Description: The golden ratio is an astonishing number in high-energy physics, neutrino physics, and cosmology. The Kolmogorov −5/3 law plays a role in describing energy transfer of random data or random functions. The contributions of this essay are in twofold. One is to express the Kolmogorov −5/3 law by using the golden ratio. The other is to represent the fractal dimension of random data following the Kolmogorov −5/3 law with the golden ratio. It is our hope that this essay may be helpful to provide a new outlook of the Kolmogorov −5/3 law from the point of view of the golden ratio.

Description: Antenna array synthesis is an important issue in MIMO radars. By judiciously designing antenna positions, one can create a very long virtual array steering vector with a small number of antennas and therefore achieve very high spatial resolution at a small cost. This paper presents a combinatorial methodology based on cyclic difference sets (CDSs) for minimum redundancy (MR) MIMO array synthesis which seeks to maximize the virtual array aperture for a given number of antennas. First, the key features of CDSs and the CDS-based MR-MIMO layouts are described. Then, the analytical expression of the maximum contiguous virtual array aperture is derived. Further, based on this expression, an enumerative shifting procedure is developed for identifying the optimal CDS-based MR-MIMO layout. Selected examples are analyzed to point out the computational effectiveness of the CDS-based MR-MIMO array synthesis.

Description: Wireless sensor networks (WSNs) are becoming bigger, and with this growth comes the need for new automatic mechanisms for initializations done by hand. One of those mechanisms is the assignment of addresses to nodes. Several solutions were already proposed for mobile ad hoc networks but they either (i) do not scale well for WSN; (ii) have no energy constraints; (iii) have no security considerations; (iv) or have no mechanisms to handle fusion of network partitions. We proposed an address self-assignment protocol which uses negative acknowledgements and an improved version of a flood control mechanism to minimize the energy spent; uses a technique named whispering to achieve robustness against malicious nodes; is able to detect dynamic network re-joint and dynamic node addition without exchanging specific messages; and handles both dynamic events without compromising routing tables.

Description: Prions are considered the best example to prove that the biological information can be transferred protein to protein through a conformational change. The term “prion-like” is used to describe molecular mechanisms that share similarities with the mammalian prion protein self-perpetuating aggregation and spreading characteristics. Since prions are presumably composed only of protein and are infectious, the more similar the mechanisms that occur in the different neurodegenerative diseases, the more these processes will resemble an infection. In vitro and in vivo experiments carried out during the last decade in different neurodegenerative disorders such as Alzheimer's disease (AD), Parkinson's diseases (PD), and amyotrophic lateral sclerosis (ALS) have shown a convergence toward a unique mechanism of misfolded protein propagation. In spite of the term “infection” that could be used to explain the mechanism governing the diversity of the pathological processes, other concepts as “seeding” or “de novo induction” are being used to describe the in vivo propagation and transmissibility of misfolded proteins. The current studies are demanding an extended definition of “disease-causing agents” to include those already accepted as well as other misfolded proteins. In this new scenario, “seeding” would be a type of mechanism by which an infectious agent can be transmitted but should not be used to define a whole “infection” process.