ALBERT

Description: Highlights • Development of an autonomous DIC analyzer based on Conductometric technique using a cell with 4 hollow brass electrodes. • CO2 extraction from seawater using a gas diffusion cell with a “Tube In A Tube” configuration and a gas permeable membrane. • Formulation of mathematical temperature and salinity correction to determine accurate DIC concentration. • Demonstration of the analyzer performance in the southwest Baltic Sea. Abstract Background The increase in anthropogenic CO2 concentrations in the Earth's atmosphere since the industrial revolution has resulted in an increased uptake of CO2 by the oceans, leading to ocean acidification. Dissolved Inorganic Carbon (DIC) is one of the key variables to characterize the seawater carbonate system. High quality DIC observations at a high spatial-temporal resolution is required to improve our understanding of the marine carbonate system. To meet the requirements, autonomous DIC analyzers are needed which offer a high sampling frequency, are cost-effective and have a low reagent and power consumption. Results We present the development and validation of a novel analyzer for autonomous measurements of DIC in seawater using conductometric detection. The analyzer employs a gas diffusion sequential injection approach in a “Tube In A Tube” configuration that facilitates diffusion of gaseous CO2 from an acidified sample through a gas permeable membrane into a stream of an alkaline solution. The change in conductivity in the alkaline medium is proportional to the DIC concentration of the sample and is measured using a detection cell constructed of 4 hollow brass electrodes. Physical and chemical optimizations of the analyzer yielded a sampling frequency of 4 samples h−1 using sub mL reagent volumes for each measurement. Temperature and salinity effects on DIC measurements were mathematically corrected to increase accuracy. Analytical precision of ±4.9 μmol kg−1 and ±9.7 μmol kg−1 were achieved from measurements of a DIC reference material in the laboratory and during a field deployment in the southwest Baltic Sea, respectively. Significance This study describes a simple, cost-effective, autonomous, on-site benchtop DIC analyzer capable of measuring DIC in seawater at a high temporal resolution as a step towards an underwater DIC sensor. The analyzer is able to measure a wide range of DIC concentrations in both fresh and marine waters. The achieved accuracy and precision offer an excellent opportunity to employ the analyzer for ocean acidification studies and CO2 leakage detection in the context of Carbon Capture and Storage operations.

Description: Highlights: • The interactions between vortices in a four-vortex flow field using a rotating water tank. • Driven by the strain field, non-ideal vortices stretch along the centerline, and manifest an asymmetric stretching pattern. • Non-ideal vortices disperse vorticity, accumulate filaments, and exhibit distinctive variations in anti-symmetric vorticity distribution, impacting respective merging efficiency. Abstract: Oceanic vortex merging is an important physical process for the vortex evolution and its impact on marine environment. However, limitation of the in-situ oceanic observational data of vortex merging inhabits its better understanding. This study investigates the interactions between non-ideal vortices in a four-vortex flow field in a rotating tank. We examine the merging stages of anticyclonic vortices, influenced by two other cyclonic vortices and their respective dynamical behaviors and quantify the effects of merging on vortex characteristics. The results indicate a strong shear flow between two counter-rotating vortices, which accelerates the motion of the anticyclonic vortex, while cyclonic ones exhibit greater stability. Subsequently, different stages of non-ideal vortex merging in a co-rotating framework are defined, primarily the encircling stage, rapid approaching stage, and merging vortex stage. In addition, we quantify and compare variations in morphological parameters and anti-symmetric vorticity distribution of non-ideal vortices across these stages. The stretching of vortices primarily occurs along the line connecting their centers due to the strain field exerted by neighboring vortices, resulting in an asymmetric stretching pattern in the interactions among non-ideal vortices. Furthermore, during the merging process, non-ideal vortices disperse vorticity outward and accumulate vortex filaments in the surrounding environment, leading to distinctive variations in anti-symmetric vorticity distribution, affecting their respective merging efficiency.

Description: In the past three decades, altimeter-based remote sensing has been a widely used system to estimate ocean surface currents. However, it remains a great challenge to effectively resolve scales below ∼100 km at high latitudes and ∼ 300 km at mid-latitudes. In this study, we propose a scheme that utilizes geostrophic equilibrium and surface quasigeostrophy theory (SQG) to improve surface current resolution by incorporating remote sensing sea surface temperature (SST), sea surface height (SSH), and sea surface salinity (SSS) observations. The scheme separately characterizes the larger-scale flows and smaller-scale motions of surface currents. A case study encompassing the Agulhas surface current demonstrates that the smaller-scale motions associated with temperature fronts are well captured by introducing high spatial-temporal resolution SST data. Furthermore, the reconstructed surface current is systemically evaluated by using surface drogued drifters and a Lagrangian synthetic particle tracking tool throughout the South Indian Ocean (SIO) for 2011–2015. Notably, the reconstructed zonal velocity component is closer to the drifter observations than the meridional counterpart and corresponding velocity phase. Regionally, the Antarctic Circumpolar Current (ACC) showcases superior reconstruction performance, with higher skill scores and lower Lagrangian separation distances. However, a relatively large uncertainty is observed around the Agulhas Retroflection (AR) and Greater Agulhas System (GAS), which are linked to complicated regional dynamic regimes. We finally conduct four simulation experiments to explore the effect of different SST products on surface current reconstruction within the subdomain AR. The results indicate the varying potentials of the four evaluated SST products for informing surface current applications. Specifically, the MWIRSST enhances the likelihood of particles reaching the target field, while DMI OI shortens the average deviation distance of the arrived particles.

Description: Marine imaging studies have unique constraints on the data collected requiring a tool for defining the biological scope to facilitate data discovery, quality evaluation, sharing and reuse. Defining the ‘target population’ is way of scoping biological sampling or observations by setting the pool of organisms to be observed or sampled. It is used in survey design and planning, to determine statistical inference, and is critical for data interpretation and reuse (both images and derived data). We designed a set of attributes for defining and recording the target population in biological studies using marine photography, incorporating ecological and environmental delineation and marine imaging method constraints. We describe how this definition may be altered and recorded at different phases of a project. The set of attributes records the definition of the target population in a structured metadata format to enhance data FAIRness. It is designed as an extension to the image FAIR Digital Objects metadata standard, and we map terms to other biological data standards where possible. This set of attributes serves a need to update ecological metadata to align with new remotely-sensed data, and can be applied to other remotely-sensed ecological image data.

Description: Fishes occur in a wider range of habitats than any other vertebrate or invertebrate group, from the upper reaches of streams in high mountain ranges to the mouths of temperate and tropical rivers, and from the intertidal zone to the ocean's abyss. Fish grow in size, spawn and die, either from natural causes (predation, diseases, ageing) or from being caught in fishing nets if the population is exploited. These dynamical processes are expressed with mathematical equations and are used in population models to estimate fisheries reference points (stock assessment), which in turn provide the basis for fisheries management. Fish populations subjected to fisheries exploitation are called fish “stocks”. Fishing has been increasingly affecting fish stocks and ecosystems both directly and indirectly, and along with the human-induced climate change they pose major threats to fish biodiversity worldwide. Using the available data stored in local or global databases to assess the status of all stocks, even the data-poor fish stocks, and following an ecosystem approach to fisheries management that incorporates effort reduction through marine protected areas, may contribute to the sustainable exploitation of fisheries resources.

Description: Cadmium (Cd) has a nutrient-like distribution in the ocean, similar to the macronutrient phosphate. Significant isotope fractionation induced by the biological cycling of Cd makes it a potential tracer for nutrients and productivity. However, the Cd flux and Cd isotope composition of marine sediments can also be influenced by local redox conditions and partial remineralization of organically hosted Cd. These confounding factors are under-constrained and render it challenging to use Cd as a reliable paleoproxy. To understand the relative importance of each of these processes, we examined the Cd isotope systematics of 69 modern sediments deposited across a wide range of environments. We complement these data with four profiles of particulate Cd isotope compositions from the Southern Ocean. We report three main results. First, we show that the sedimentary flux of Cd is tightly coupled to that of organic matter. Second, most Cd burial occurs in regions with some bottom-water oxygen, and the flux of CdS to anoxic regions is, globally, minor. Finally, we find that remineralization can substantially modify sedimentary Cd isotope compositions, though it is challenging to relate pelagic and sedimentary processes. For example, we find that the relationship between sedimentary Cd isotope compositions and surface seawater [Cd] is the reverse of that predicted by isotope reactor models. Likewise, sedimentary Cd isotope compositions are anti-correlated with bottom-water oxygen. While this pattern is consistent with preferential remineralization of isotopically heavy Cd, profiles of marine particulate matter reveal the reverse, whereby the Cd isotope composition of large particles, which are most likely to reach the seafloor, becomes increasingly ‘heavy’ with depth. These results highlight how productivity, redox, and remineralization all influence the flux and isotope composition of Cd to marine sediments. While our study suggests that there is no simple way to relate sedimentary Cd isotopes to surface nutrient utilization, our data point toward several potential controls that could form the basis of novel proxies for local redox conditions and remineralization.

Description: Trace metals (TMs) manganese (Mn), cobalt (Co), and aluminium (Al) have important geochemical and biological roles in the ocean. Here, we present full depth profiles of dissolved (d) and particulate Al, Mn, and Co along the latitude of 40 °S in the South Atlantic Ocean from the GEOTRACES GA10 cruises that operated in austral spring 2010 and summer 2011. The region is characterized by enhanced primary productivity and forms a key transition zone between the Southern Ocean and South Atlantic Subtropical Gyre. The mean concentrations of dAl, dCo, and dMn (±standard deviation) were 3.36 ± 2.65 nmol kg−1, 35.3 ± 17.6 pmol kg−1, and 0.624 ± 1.08 nmol kg−1, respectively. Their distributions in surface waters were determined by external sources and complex internal biogeochemical processes. Specifically, surface ocean dCo was controlled by the interplay between phytoplankton uptake, remineralization and external inputs; dMn was likely determined by the formation and photoreduction of Mn-oxides; and dAl was supplied by atmospheric deposition and removed by scavenging onto particles. Fluvial and sedimentary inputs near the Rio de La Plata estuary and benthic sources from the Agulhas Bank resulted in elevated dTM concentrations in near-shore surface waters. These externally sourced dTMs were effectively delivered to the open ocean by offshore diffusion and/or advection, and potentially facilitated enhanced primary productivity along the transect. The distributions of dTMs at depth were predominantly controlled by the mixing of North Atlantic Deep Water (NADW) and waters of Antarctic origin (e.g., Upper Circumpolar Water (UCDW) and Antarctic Bottom Water (AABW)). The calculated endmember concentrations of dAl and dCo in NADW showed minor decreases in the SASTG following north–south transport, suggesting removal rates of 0.064 nM/year and 0.035–0.075 pM/year, respectively. The endmember concentration of dCo in AABW was maintained at ∼30 pmol kg−1 without evidence for scavenging removal in the Southern Ocean and SASTG (time frame 〉400 years). The concentrations of dMn in NADW and AABW were between 0.1 and 0.16 nmol kg−1, and any elevated dMn concentrations were ascribed to local external inputs (e.g., from sediments in the Argentine Basin and hydrothermal activity near the Mid-Atlantic Ridge). Hence, four controlling factors (sources, internal cycling, water mass mixing and time) need to be considered when assessing TM distributions in the global ocean, even for TMs that are vulnerable to scavenging removal processes. Because the deep waters formed in high latitude oceans are crucial components of the global thermohaline overturning system, any processes (e.g., glacier melting, upwelling and sinking, and biological activity) that impact the preformed dTM concentrations in high latitude oceans will determine the downstream dTM distributions. Therefore, the sources and sinks of TMs and associated biological activity in high latitude oceans could engender basin to global scale impacts on seawater distributions of Al, Co, and Mn and their stoichiometric relationships with macronutrients, and the global biogeochemical cycles of these scavenged-type TMs.

Description: The overriding physicochemical controls in seawater discussed here are the chemical composition and the state of master variables including temperature, pressure, salinity, pH and redox status. Dissolved Organic Matter also plays a major role, but since its properties are not sufficiently well quantified it is described as an emergent master variable at this stage. The theoretical basis for the treatment of equilibrium chemistry and kinetics is presented, together with projections of the future development of seawater chemistry resulting from climate change. Key points • Composition of seawater • Master variables (temperature, pressure, pH, oxygen/redox state) • The role of Dissolved Organic Matter • Equilibrium chemistry • Kinetics • The consequences of ongoing global changes