ALBERT

Description: While the kinematics of Anatolia plate and the North Anatolian Fault System (NAFS) has been studied extensively, the slip rate and locking depth along the NAFS are usually assumed constant in the analyses due to the lack of sufficient data. This is also partly due to the reasonably good fit of Euler small circle and partly due to the lack of spatial resolution of observations to determine slip rates independently from locking depths. On the other hand, recent geodetic studies show a contrast for locking depth between Marmara and other parts of the NAFS, implying a non-uniform locking depth across the NAFS. In this study, we analyse new GPS data and homogenously combine available data sets covering the eastern part of the NAFS to form the most complete data set. In particular, we incorporate the first results of Turkish Real-Time Kinematic GPS Network (CORS-TR) into our data set. A detailed analysis of three profiles within the NAFS reveals an increase of locking depth in the middle profile to 19.1 ± 3.4 km from 11.9 ± 3.5 km in the easternmost profile while the slip rate is nearly constant (20–22 mm yr –1 ), which implies a variation of strain rate of ~100 nanostrain yr –1 . Assuming a constant locking depth throughout whole NAFS gives an average locking depth of 14.3 ± 1.7 km. Our best estimates of slip rates in block modelling which takes the variation of locking depths into account are in the range between 22.5 and 22.8 mm yr –1 over eastern part of the NAFS.

Description: The Taupo Volcanic Zone (TVZ) is one of the world's most productive regions of rhyolitic volcanism and contains the highly active Okataina Volcanic Centre (OVC). Within the TVZ, intra-arc extension is expressed as normal faulting within a zone known as the Taupo Rift. The OVC is located within a complex part of the rift, where volcanism and deformation is considered influenced by rift structure and kinematics. There has been significant research on the structural, volcanic and geophysical properties of the rift and OVC, but less focus on deformation using geodetic data. The limited studies that have utilized geodetic data do not clearly resolve the distribution of deformation and strain rates within the rift and OVC. This is essential to ensure that deformation signals from volcanic processes at the OVC are correctly identified and distinguished from those related to regional tectonic or local hydrothermal processes within the rift. In this paper, we present a picture of contemporary deformation at the OVC and within the surrounding rift in detail, using existing and new GPS campaign and continuous GPS (cGPS) data collected between 1998 and 2011. The results show a highly heterogeneous deformation and strain rate field (both extension and shortening) through the study area, partitioned into different parts of the rift. Our results agree well with earlier geodetic studies, as well as identify new features, but some deformation patterns conflict with long-term geological observations. In the OVC, we observe a locally rotated horizontal velocity field, significant vertical deformation and variable strain rates across the caldera. In the Tarawera Rift, we identify elevated extension and shear rates, which may have significant implications for volcanism there. A shortening pattern is identified through the central rift, which is unexpected in an intra-arc rifting environment. We attempt to explain the source/s of shortening and extension and discuss their implications for geodetic monitoring efforts in the OVC.

Description: The pre- and current collision of the Juan Fernández Ridge with the central Chilean margin at 31°–33°S is characterized by large-scale crustal thinning and long-term subsidence of the submarine forearc caused by subduction erosion processes. Here, we study the structure of the central Chilean margin in the ridge–trench collision zone by using wide-angle and multichannel seismic data. The transition from the upper to middle continental slope is defined by a trenchward dipping normal scarp with variable offsets of 500–2000 m height. Beneath the scarp, the 2-D velocity–depth models show a prominent lateral velocity contrast of 〉1 s –1 that propagates deep into the continental crust defining a major lateral seismic discontinuity. The discontinuity is interpreted as the lithological contact between the subsided/collapsed outermost forearc (composed of eroded and highly fractured volcanic rocks) and the seaward part of the uplifted Coastal Cordillera (made of less fractured metamorphic/igneous rocks). Extensional faults are abundant in the collapsed outermost forearc, however, landward of the continental slope scarp, both extensional and compressional structures are observed along the uplifted continental shelf that forms part of the Coastal Cordillera. Particularly, at the landward flank of the Valparaíso Forearc Basin (32°–33.5°S), shallow crustal seismicity has been recorded in 2008–2009 forming a dense cluster of thrust events of M w 4–5. The estimated hypocentres spatially correlate with the location of the fault scarp, and they highlight the upper part of the seismic crustal discontinuity.

Description: Sequence alignment is a long standing problem in bioinformatics. The Basic Local Alignment Search Tool (BLAST) is one of the most popular and fundamental alignment tools. The explosive growth of biological sequences calls for speedup of sequence alignment tools such as BLAST. To this end, we develop high speed BLASTN (HS-BLASTN), a parallel and fast nucleotide database search tool that accelerates MegaBLAST—the default module of NCBI-BLASTN. HS-BLASTN builds a new lookup table using the FMD-index of the database and employs an accurate and effective seeding method to find short stretches of identities (called seeds) between the query and the database. HS-BLASTN produces the same alignment results as MegaBLAST and its computational speed is much faster than MegaBLAST. Specifically, our experiments conducted on a 12-core server show that HS-BLASTN can be 22 times faster than MegaBLAST and exhibits better parallel performance than MegaBLAST. HS-BLASTN is written in C++ and the related source code is available at https://github.com/chenying2016/queries under the GPLv3 license.

Description: Model evaluation is a necessary step for better prediction and design of 3D RNA structures. For proteins, this has been widely studied and the knowledge-based statistical potential has been proved to be one of effective ways to solve this problem. Currently, a few knowledge-based statistical potentials have also been proposed to evaluate predicted models of RNA tertiary structures. The benchmark tests showed that they can identify the native structures effectively but further improvements are needed to identify near-native structures and those with non-canonical base pairs. Here, we present a novel knowledge-based potential, 3dRNAscore, which combines distance-dependent and dihedral-dependent energies. The benchmarks on different testing datasets all show that 3dRNAscore are more efficient than existing evaluation methods in recognizing native state from a pool of near-native states of RNAs as well as in ranking near-native states of RNA models.

Description: Geodetic observations of interseismic deformation in the Western United States provide constraints on microplate rotations, earthquake cycle processes, and slip partitioning across the Pacific–North America Plate boundary. These measurements may be interpreted using block models, in which the upper crust is divided into microplates bounded by faults that accumulate strain in a first-order approximation of earthquake cycle processes. The number and geometry of microplates are typically defined with boundaries representing a limited subset of the large number of potentially seismogenic faults. An alternative approach is to include a large number of potentially active faults bounding a dense array of microplates, and then algorithmically estimate the boundaries at which strain is localized. This approach is possible through the application of a total variation regularization (TVR) optimization algorithm, which simultaneously minimizes the L 2 norm of data residuals and the L 1 norm of the variation in the differential block motions. Applied to 3-D spherical block models, the TVR algorithm can be used to reduce the total variation between estimated rotation vectors, effectively grouping microplates that rotate together as larger blocks, and localizing fault slip on the boundaries of these larger block clusters. Here we develop a block model comprised of 137 microplates derived from published fault maps, and apply the TVR algorithm to identify the kinematically most important faults in the western United States. This approach reveals that of the 137 microplates considered, only 30 unique blocks are required to approximate deformation in the western United States at a residual level of 〈2 mm yr –1 .

Description: We develop and validate a systematic approach to infer plate boundary strength and rheological parameters in models of mantle flow from surface velocity observations. Based on a realistic rheological model that includes yielding and strain rate weakening from dislocation creep, we formulate the inverse problem in a Bayesian inference framework. To study the distribution of parameters that are consistent with the observations, we compute the maximum a posteriori (MAP) point, Gaussian approximations of the parameter distribution around that MAP point, and employ Markov Chain Monte Carlo (MCMC) sampling methods. The computation of the MAP point and the Gaussian approximation require first and second derivatives of an objective function subject to non-linear Stokes equations; these derivatives are computed efficiently using adjoint Stokes equations. We set up 2-D numerical experiments with many of the elements expected in a global geophysical inversion. This setup incorporates three subduction zones with slab and weak zone (interplate fault) geometry consistent with average seismic characteristics. With these experiments, we demonstrate that when the temperature field is known, we can recover the strength of plate boundaries, the yield stress and strain rate exponent in the upper mantle. When the number of uncertain parameters increases, there are trade-offs between the inferred parameters. These trade-offs depend on how well the observational data represents the surface velocities, and on the weakness of plate boundaries. As the plate boundary coupling drops below a threshold, the uncertainty of the inferred parameters increases due to insensitivity of plate motion to plate coupling. Comparing the trade-offs between inferred rheological parameters found from the Gaussian approximation of the parameter distribution and from MCMC sampling, we conclude that the Gaussian approximation—which is significantly cheaper to compute—is often a good approximation, in particular locally around the MAP point. Thus, the method can be applied to the global problem of inferring non-linear constitutive parameters and plate coupling factors for each subduction zone in a global geophysical inversion with known slab structure.

Description: We explore thermal convection of a fluid with a temperature-dependent viscosity in a basally heated 3-D spherical shell using linear stability analyses and numerical experiments, while considering the application of our results to terrestrial planets. The inner to outer radius ratio of the shell f assumed in the linear stability analyses is in the range of 0.11–0.88. The critical Rayleigh number R c for the onset of thermal convection decreases by two orders of magnitude as f increases from 0.11 to 0.88, when the viscosity depends sensitively on the temperature, as is the case for real mantle materials. Numerical simulations carried out in the range of f  = 0.11–0.55 show that a thermal boundary layer (TBL) develops both along the surface and bottom boundaries to induce cold and hot plumes, respectively, when f is 0.33 or larger. However, for smaller f values, a TBL develops only on the bottom boundary. Convection occurs in the stagnant-lid regime where the root mean square velocity on the surface boundary is less than 1 per cent of its maximum at depth, when the ratio of the viscosity at the surface boundary to that at the bottom boundary exceeds a threshold that depends on f . The threshold decreases from 10 6.5 at f  = 0.11 to 10 4 at f  = 0.55. If the viscosity at the base of the convecting mantle is 10 20 –10 21  Pa s, the Rayleigh number exceeds R c for Mars, Venus and the Earth, but does not for the Moon and Mercury; convection is unlikely to occur in the latter planets unless the mantle viscosity is much lower than 10 20  Pa s and/or the mantle contains a strong internal heat source.

Description: Subducting oceanic lithosphere is an example of a thin sheet-like object whose characteristic lateral dimension greatly exceeds its thickness. Here we exploit this property to derive a new hybrid boundary-integral/thin sheet (BITS) representation of subduction that combines in a single equation all the forces acting on the sheet: gravity, internal resistance to bending and stretching, and the tractions exerted by the ambient mantle. For simplicity, we limit ourselves to 2-D. We solve the BITS equations using a discrete Lagrangian approach in which the sheet is represented by a set of vertices connected by edges. Instantaneous solutions for the sinking speed of a slab attached to a trailing flat sheet obey a scaling law of the form V / V Stokes  = fct(St), where V Stokes is a characteristic Stokes sinking speed and St is the sheet's flexural stiffness. Time-dependent solutions for the evolution of the sheet's shape and thickness show that these are controlled by the viscosity ratio between the sheet and its surroundings. An important advantage of the BITS approach is the possibility of generalizing the sheet's rheology, either to a viscosity that varies along the sheet or to a non-Newtonian shear-thinning rheology.

Description: Invertebrate animal species that can withstand temperatures as high as 37°C, the human body temperature, are limited. In the present study, we utilized the two-spotted cricket, Gryllus bimaculatus , which lives in tropical and subtropical regions, as an animal model of human pathogenic bacterial infection. Injection of Pseudomonas aeruginosa or Staphylococcus aureus into the hemolymph killed crickets. Injected P. aeruginosa or S. aureus proliferated in the hemolymph until the cricket died. The ability of these pathogenic bacteria to kill the crickets was blocked by the administration of antibiotics. S. aureus gene-knockout mutants of virulence factors, including cvfA, agr and srtA , exhibited decreased killing ability compared with the parent strain. The dose at which 50% of crickets were killed by P. aeruginosa or S. aureus was not decreased at 37°C compared with that at 27°C. Injection of Listeria monocytogenes , which upregulates toxin expression at 37°C, killed crickets, and the dose at which 50% of crickets were killed was decreased at 37°C compared with that at 27°C. These findings suggest that the two-spotted cricket is a useful model animal for evaluating the virulence properties of various human pathogenic bacteria at variable temperature including 37°C.