ALBERT

All Library Books, journals and Electronic Records Telegrafenberg

X
feed icon rss

Your email was sent successfully. Check your inbox.

An error occurred while sending the email. Please try again.

Proceed reservation?

Export
Filter
  • Articles  (45)
  • Other low-carbon energy technologies  (35)
  • Q54 - Climate  (7)
  • Fuel cells systems  (3)
  • Oxford University Press  (45)
  • IOS Press
  • Energy, Environment Protection, Nuclear Power Engineering  (45)
  • 1
    facet.materialart.
    Unknown
    Calculations of effectiveness factors and the criteria of mass transfer effect for high-temperature methanation (HTM) catalyst (2015)
    Oxford University Press
    Details
    Publication Date: 2015-08-16
    Description: Natural gas is an extremely important bridge fuel to a low-carbon energy economy for improving local air quality. Coal to synthetic natural gas (SNG) is an effective way to convert the high-carbon energy (coal) into the low-carbon energy with rich hydrogen (natural gas). For the modern coal to SNG industry, the high-temperature methanation (HTM) catalyst plays an important role, and the advanced evaluation process should necessitate the elimination of mass transfer effect. Some simple but effective model catalysts, such as slab and sphere, can be very helpful in defining the reaction conditions, and thus facilitating the evaluation process for real HTM catalysts. In this work, slab and sphere model catalysts were adopted to derive mass transfer and reaction-coupled equations, the numerical methods were used to solve the coupled equations for the concentration profiles in catalysts, and the effectiveness factors were accordingly calculated. By taking advantage of the Thiele module and the Weisz–Prater module , the criteria for the elimination of mass transfer effect in the HTM catalyst evaluation process were successfully defined. This work also complements the Weisz–Prater criterion by incorporating ‘negative reaction orders’.
    Keywords: Other low-carbon energy technologies
    Print ISSN: 1748-1317
    Electronic ISSN: 1748-1325
    Topics: Energy, Environment Protection, Nuclear Power Engineering , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Published by Oxford University Press
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    PAPER CURRENT
  • 2
    facet.materialart.
    Unknown
    A novel low-carbon space conditioning system incorporating phase-change materials and earth-air heat exchangers (2015)
    Oxford University Press
    Details
    Publication Date: 2015-08-16
    Description: The energy expended for conditioning buildings around the world is worryingly large and increasing every year. Currently, almost half of houses around the world use some type of energy-expensive conventional air-conditioning system. These systems are high emitters of gases such as carbon dioxide and so high contributors to climate change. Consequently, alternatives must be considered. Earth–air heat exchangers (EAHEs) and phase-change materials (PCMs) may be options; they have, however, limitations. This paper proposes a novel hybrid space-conditioning system combining EAHEs with PCMs, which uses surfaces as sources of heating or cooling to provide better temperature distribution across a space and comfort enhancement with low energy use. The idea is to use an EAHE to provide cool air to discharge the PCM, consequently helping to overcome most of the limitations of both strategies. Two of a series of experiments undertaken to test the proposed system are reported in this article. The EAHE + PCM system compared with a reference room could decrease temperature swings by up to 47%. The system was proved to work although further work is required to make it commercially viable.
    Keywords: Other low-carbon energy technologies
    Print ISSN: 1748-1317
    Electronic ISSN: 1748-1325
    Topics: Energy, Environment Protection, Nuclear Power Engineering , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Published by Oxford University Press
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    PAPER CURRENT
  • 3
    facet.materialart.
    Unknown
    Numerical investigation of turbulent flow heat transfer and pressure drop of AL2O3/water nanofluid in helically coiled tubes (2015)
    Oxford University Press
    Details
    Publication Date: 2015-08-16
    Description: Passive convective heat transfer enhancement can be achieved by improving the thermo-physical properties of the working fluid, changing flow geometry or both. This work presents a numerical study to investigate the combined effect of using helical coils and nanofluids on the heat transfer characteristics and pressure losses in turbulent flow regime. The developed computational fluid dynamics models were validated against published experimental data and empirical correlations. Results have shown that combining the effects of alumina (Al 2 O 3 ) nanoparticles and tube coiling could enhance the heat transfer coefficient by up to 60% compared with that of pure water in straight tube at the same Reynolds number. Also, results showed that the pressure drop in helical coils using Al 2 O 3 nanofluid for volume fraction of 3% was six times that of water in straight tubes (80% of the pressure drop increase is due to nanoparticles addition), while the effect of Reynolds number on the pressure drop penalty factor was found to be insignificant.
    Keywords: Other low-carbon energy technologies
    Print ISSN: 1748-1317
    Electronic ISSN: 1748-1325
    Topics: Energy, Environment Protection, Nuclear Power Engineering , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Published by Oxford University Press
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    PAPER CURRENT
  • 4
    facet.materialart.
    Unknown
    Readdressing working fluid selection with a view to designing a variable geometry ejector (2015)
    Oxford University Press
    Details
    Publication Date: 2015-08-16
    Description: A number of factors influence the performance of an ejector, e.g. working fluid, geometry and operating conditions. In the present work, six low-environmental-impact working fluids were evaluated for their use in an ejector cooling system running on low-temperature thermal energy. The numerical analysis was based on a model applying the 1D constant-pressure mixing theory. Ejector performance was assessed for the temperatures of the generator, evaporator and condenser in the range of 80–120°C, 5–15°C and 25–40°C, respectively. The results indicated that owing to its high coefficient of performance and moderate operating pressures throughout the entire ejector cycle, isobutane is a good choice for a refrigerant. The area ratio required for running the ejector in critical mode, under changing operating conditions, varied in a significant range regardless of the selected refrigerant. This clearly indicates the importance of a variable geometry ejector design to strengthen the position of ejector cooling systems among other refrigeration technologies.
    Keywords: Other low-carbon energy technologies
    Print ISSN: 1748-1317
    Electronic ISSN: 1748-1325
    Topics: Energy, Environment Protection, Nuclear Power Engineering , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Published by Oxford University Press
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    PAPER CURRENT
  • 5
    facet.materialart.
    Unknown
    Constructal optimization of a disc-shaped body with cooling channels for specified power pumping (2015)
    Oxford University Press
    Details
    Publication Date: 2015-08-16
    Description: The thermal performance of a disc-shaped heat generation body with cooling channels is investigated by using constructal theory based on previous model of heat convection on a disc and previous analytical method of heat conduction on a disc. By taking minimum dimensionless maximum thermal resistance as optimization objective, the optimal aspect ratio of the elemental sector in the radial-pattern disc is obtained for the specified power pumping of the elemental sector; the optimal width ratio of the first-order and elemental cooling channels and the optimal dimensionless radius of the elemental sector are obtained for the specified power pumping of the disc. There exists a critical radius of the disc to determine whether the radial-pattern design and branched-pattern design should be adopted. These conclusions are different from those obtained by Wechsatol et al. 's model, and the essential reason for these differences is that the power pumping is specified in this article, but not the specified flow rate number in Wechsatol et al. 's model. Finally, the assumption about the heat capacity of the coolant and the thermal conductivity of the disc is validated. An analytical method is introduced in this article, which can provide another thought for the constructal optimization of disc with heat convection. The optimal constructs of the discs are obtained for the specified power pumping, which provides some different guidelines for the design of disc with heat convection.
    Keywords: Other low-carbon energy technologies
    Print ISSN: 1748-1317
    Electronic ISSN: 1748-1325
    Topics: Energy, Environment Protection, Nuclear Power Engineering , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Published by Oxford University Press
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    PAPER CURRENT
  • 6
    facet.materialart.
    Unknown
    Computational study of a 2D capillary pump evaporator (2015)
    Oxford University Press
    Details
    Publication Date: 2015-08-16
    Description: Capillary pump loop (CPL) is a two-phase heat transfer device considered as a useful solution for thermal control applications in spacecrafts, satellites and electronic components. The purpose of this paper is to study various aspects of the working state of the CPL evaporator. A two-dimensional computational model was developed in order to analyze the flow and the phase transformation inside a cylindrical evaporator. At the present analysis, different cases were studied by changing liquid saturation temperature, inclination angle of the evaporator and the length of the porous heated wick. Water, ammonia, acetone and freon-134 were used as working liquids for numerical experiments. Results present the evaporator capability to vaporize each working liquid and find out its possibility of dry-out causing failure. This information is useful in choosing the best working liquid for an evaporator, enabling bigger amounts of heat to be transferred.
    Keywords: Other low-carbon energy technologies
    Print ISSN: 1748-1317
    Electronic ISSN: 1748-1325
    Topics: Energy, Environment Protection, Nuclear Power Engineering , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Published by Oxford University Press
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    PAPER CURRENT
  • 7
    facet.materialart.
    Unknown
    Design guideline for application of earth-to-air heat exchanger coupled with solar chimney as a natural heating system (2015)
    Oxford University Press
    Details
    Publication Date: 2015-08-16
    Description: In the present paper, design of solar chimney (SC) and earth-to-air heat exchanger (EAHE) to meet the thermal need of flat buildings are studied regarding adaptive thermal comfort criteria. Investigation on the effects of geometric features shows that the design of SC with the air gap and outlet sizes of 0.2 m and also EAHE with the diameter and length of 0.5 and 25.0 m reveals better performance. Thermal comfort analysis shows that the SC is capable to power the underground heating system during few hours of the sunny days even at the ambient temperature as low as 0°C and the heating demand of 1000 W without needing the auxiliary devices. In addition, the required numbers of SCs and the underground air channels are strongly influenced by environmental outdoor conditions and heating demand of building and are approximately calculated by: $$\hbox{ room }\phantom{\rule{0.08em}{0ex}}\hbox{ volume/50 }\phantom{\rule{0.08em}{0ex}}\hbox{ and }\phantom{\rule{0.08em}{0ex}}\hbox{ 2 }\times (\hbox{ room }\phantom{\rule{0.08em}{0ex}}\hbox{ volume/50 })+\hbox{ 1, }$$ respectively.
    Keywords: Other low-carbon energy technologies
    Print ISSN: 1748-1317
    Electronic ISSN: 1748-1325
    Topics: Energy, Environment Protection, Nuclear Power Engineering , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Published by Oxford University Press
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    PAPER CURRENT
  • 8
    facet.materialart.
    Unknown
    Numerical analysis of solar-assisted seasonal 'open' thermochemical heat storage (2015)
    Oxford University Press
    Details
    Publication Date: 2015-05-13
    Description: In the last decade, interest in heat storage systems has been increasing. These systems will have increasing importance for utilization of solar energy in domestic heating systems. As solar energy is a diurnal cyclic resource, storing excess solar energy for long- or short-term periods will both increase the utilization of solar energy systems and decrease fossil fuel consumption. The relatively new heat storage method using thermochemical storage has shown some significant advantages such as low heat loss (-〉 zero), high heat storage density and low space requirement. These important properties make thermochemical storage a promising alternative for long-term energy storage. In the present study, a numerical investigation on ‘open’ seasonal thermochemical storage has been undertaken. The simulation results show that the volume/mass of the absorbent, mass flow rate and relative humidity of air have significant importance on the reaction kinetics and system performance during the system discharging process. Conversely, total collector area, solar radiation and mass flow rate of air are important parameters during the charging process. The results conclude that, overall, reactor design is the most important factor for storage performance. In addition, reaction advancement ( X ) has a significant importance on process efficiency.
    Keywords: Other low-carbon energy technologies
    Print ISSN: 1748-1317
    Electronic ISSN: 1748-1325
    Topics: Energy, Environment Protection, Nuclear Power Engineering , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Published by Oxford University Press
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    PAPER CURRENT
  • 9
    facet.materialart.
    Unknown
    Optimization of building-integrated photovoltaic thermal air system combined with thermal storage (2015)
    Oxford University Press
    Details
    Publication Date: 2015-05-13
    Description: Photovoltaic (PV) combined with phase change material (PV/PCM) system is a hybrid solar system that uses a PCM to reduce the PV temperature and to store energy for other applications. This study aims to increase the integrated PV efficiency of buildings by incorporating PCM while utilizing the stored heat in PCM for controlling indoor conditions. Experiments have been carried out on a prototype PV/PCM air system using monocrystalline PV modules. Transient simulations of the system performance have also been performed using a commercial computational fluid dynamics package based on the finite volume method. The results from simulation were validated by comparing it with experimental results. The results indicate that PCM is effective in limiting temperature rise in PV device and the heat from PCM can enhance night ventilation and decrease the building energy consumption to achieve indoor thermal comfort for certain periods of time.
    Keywords: Other low-carbon energy technologies
    Print ISSN: 1748-1317
    Electronic ISSN: 1748-1325
    Topics: Energy, Environment Protection, Nuclear Power Engineering , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Published by Oxford University Press
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    PAPER CURRENT
  • 10
    facet.materialart.
    Unknown
    Thermal energy storage: the role of the heat pipe in performance enhancement (2015)
    Oxford University Press
    Details
    Publication Date: 2015-05-13
    Description: Heat pipes and thermosyphons—devices of high effective thermal conductivity—have been studied for many years for enhancing the performance of solid, liquid and phase change material (PCM) heat stores. However, as the applications of heat storage widen, from micro-electronics thermal control to concentrated solar heat storage and vehicle thermal management, and even for chemical reactor isothermalization, the challenges facing heat storage increasingly are moving from those associated with the ‘standard’ diurnal storage, in itself a problem for low thermal conductivity materials, to response times measured in a few hours or even minutes. While high thermal conductivity metals such as foams can be impregnated with a PCM, for example, to increase local conductivity, the rapid heat input and removal necessitates a more radical approach—heat pipes, possibly with feedback control, with innovative PCM interfaces. This paper reviews the use of heat pipes in conventional and rapid response PCM and liquid or cold storage applications and introduces some novel concepts that might overcome current limitations.
    Keywords: Other low-carbon energy technologies
    Print ISSN: 1748-1317
    Electronic ISSN: 1748-1325
    Topics: Energy, Environment Protection, Nuclear Power Engineering , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Published by Oxford University Press
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    PAPER CURRENT
  • 11
    facet.materialart.
    Unknown
    Identifying bottlenecks in charging infrastructure of plug-in hybrid electric vehicles through agent-based traffic simulation (2015)
    Oxford University Press
    Details
    Publication Date: 2015-05-13
    Description: The effect of different charging infrastructure configurations on the electric-driven distance of plug-in hybrid electric vehicles (e-mileage) has been investigated, using an agent-based traffic simulation. Our findings suggest that the same e-mileage can be achieved with fewer charging poles if the poles support charging from several parking slots around them, and the charging cable is switched from one vehicle to the next. We also find that the charging power supported by most Finnish charging stations, 3.7 kW, and the cable switching delay of 1 h seem to be sufficient for effective workplace charging.
    Keywords: Other low-carbon energy technologies
    Print ISSN: 1748-1317
    Electronic ISSN: 1748-1325
    Topics: Energy, Environment Protection, Nuclear Power Engineering , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Published by Oxford University Press
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    PAPER CURRENT
  • 12
    facet.materialart.
    Unknown
    The Green Paradox in Open Economies: Lessons from Static and Dynamic Models (2015)
    Oxford University Press
    Details
    Publication Date: 2015-07-18
    Description: This article examines how, in a world with incomplete coordination among countries, well-intentioned unilateral environmental policies may actually harm the global environment. This outcome is known as the "Green Paradox." The incentives for free-riding and the challenge of achieving an effective international environmental agreement are reviewed. I examine the various channels that lead to carbon leakage in static models of open economies, and report some simulation results. This is complemented by a review of the potential for Green Paradox outcomes in dynamic open-economy models in which forward-looking firms exploit an exhaustible resource. I show that border tax adjustments can lead to Green Paradox outcomes. I also discuss priorities for future research on environmental policies in a trading world that lacks a central enforcement agency.
    Keywords: Q54 - Climate ; Natural Disasters ; Global Warming, Q42 - Alternative Energy Sources
    Print ISSN: 1750-6816
    Electronic ISSN: 1750-6824
    Topics: Energy, Environment Protection, Nuclear Power Engineering , Political Science , Economics
    Published by Oxford University Press
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    PAPER CURRENT
  • 13
    facet.materialart.
    Unknown
    Reflections-Managing Uncertain Climates: Some Guidance for Policy Makers and Researchers (2015)
    Oxford University Press
    Details
    Publication Date: 2015-07-18
    Description: Climate change—and, by extension, climate policy—is beset with unknowns and unknowables. This "Reflections" article presents an overview of approaches to managing climate uncertainties, in the hopes of providing guidance for current policy decisions as well as future research. We propose the following guidance for policy makers: Treat climate change as a risk management problem; recognize that benefit-cost analysis is only the first of many steps in deciding on optimal climate policy; in assessing abatement choices, use a discount rate that declines over time; recognize the importance of framing, evidence, and connecting the dots; reward modesty. We suggest the following questions for consideration by researchers: Can we improve forecasting? Can we improve the way we address nonlinearities and possible irreversibilities? What other (sub)disciplines merit a closer look? How can we create the right incentives for updating and expanding economic damage functions and climate-economy models? What alternative decision criteria merit further exploration? What does ‘not knowing’ tell us?
    Keywords: Q54 - Climate ; Natural Disasters ; Global Warming, D81 - Criteria for Decision-Making under Risk and Uncertainty
    Print ISSN: 1750-6816
    Electronic ISSN: 1750-6824
    Topics: Energy, Environment Protection, Nuclear Power Engineering , Political Science , Economics
    Published by Oxford University Press
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    PAPER CURRENT
  • 14
    facet.materialart.
    Unknown
    Review of heat pipe heat exchangers for enhanced dehumidification and cooling in air conditioning systems (2016)
    Oxford University Press
    Details
    Publication Date: 2016-08-26
    Description: Heat pipe heat exchangers could be employed as run-around coils in air conditioning systems for enhanced dehumidification and cooling. This article reviews some of the works conducted on the cooling and dehumidification aspects in various air conditioning systems. They have been proved to be effective in enhancing dehumidification and reducing air conditioning costs especially in hot and humid tropical countries.
    Keywords: Other low-carbon energy technologies
    Print ISSN: 1748-1317
    Electronic ISSN: 1748-1325
    Topics: Energy, Environment Protection, Nuclear Power Engineering , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Published by Oxford University Press
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    PAPER CURRENT
  • 15
    facet.materialart.
    Unknown
    Towards clean and sustainable distributed energy system: the potential of integrated PEMFC-CHP (2016)
    Oxford University Press
    Details
    Publication Date: 2016-08-26
    Description: The mitigation options to meet the ambitious carbon reduction targets set by the UK government are discussed in this paper, including the use of carbon capture and storage (CCS) technology, clean renewable energy integration and a proposed system of integrated fuel cell combined heat and power (FC-CHP) technology. Analysis shows that the use of CCS technology within the current infrastructure can abate half the electricity-associated CO 2 emissions; however, this comes at a high cost penalty. The emissions associated with domestic heat cannot be prevented without changes in the energy infrastructure. Hydrogen-powered fuel cells can provide clean energy at a range of scales and high efficiencies, especially when employed with a CHP system. However, production of CO 2 -free hydrogen is essential for fuel cell technology to contribute substantially to a low carbon economy globally. In this work, three methods were investigated for small-scale distributed hydrogen production, namely steam methane reforming, water electrolysis (WE) and cold plasma jet (CPJ). The criteria used for comparisons include the associated CO 2 emissions and the cost of energy production. CPJ decomposition of methane shows a high potential when combined with integrated FC-CHP technology for economically viable and CO 2 -free generation of energy, especially in comparison to WE. Including the value of the solid carbon product makes the plasma system most attractive economically.
    Keywords: Other low-carbon energy technologies
    Print ISSN: 1748-1317
    Electronic ISSN: 1748-1325
    Topics: Energy, Environment Protection, Nuclear Power Engineering , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Published by Oxford University Press
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    PAPER CURRENT
  • 16
    facet.materialart.
    Unknown
    Endoreversible modeling and optimization of multistage isothermal chemical engines under linear mass transfer law via Hamilton-Jacobi-Bellman theory (2016)
    Oxford University Press
    Details
    Publication Date: 2016-08-26
    Description: A multistage continuous isothermal endoreversible chemical engine system with a finite driving fluid is investigated in this paper, and the mass transfer law obeys the linear mass transfer law [ $$g\propto \mathrm{\Delta }\mu $$ ]. Under the condition that both the initial time and the initial key component concentration in the driving fluid are fixed, the maximum power output of the multistage chemical engine system and the corresponding optimal concentration configuration of the key component in the driving fluid are derived by applying Hamilton–Jacobi–Bellman (HJB) theory, and numerical examples for three different boundary conditions are given. The results show that the difference between the chemical potential of the key component and the Carnot chemical potential for the maximum power output is a constant, and the key component concentration in the driving fluid decreases with the increase of time nonlinearly; when both the process period and the final concentration of the key component are fixed, there is an optimal control strategy for the maximum power output of the multistage chemical engine system, and the maximum power outputs of the system and the corresponding optimal control strategies are different for different final concentrations. The obtained results can provide some theoretical guidelines for the optimal designs and operations of practical energy conversion systems.
    Keywords: Other low-carbon energy technologies
    Print ISSN: 1748-1317
    Electronic ISSN: 1748-1325
    Topics: Energy, Environment Protection, Nuclear Power Engineering , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Published by Oxford University Press
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    PAPER CURRENT
  • 17
    facet.materialart.
    Unknown
    Thermodynamic analysis and optimization of the Atkinson engine by using NSGA-II (2016)
    Oxford University Press
    Details
    Publication Date: 2016-08-26
    Description: Recently, several studies have been conducted regarding the Atkinson cycle and Atkinson engine which have resulted in various thermal efficiency and output power analysis. In the present study, output power and engine thermal efficiency are maximized via employing the NSGA-II approach and thermodynamic analysis. The multi-objective evolutionary approach on the basis of the NSGA-II method is implemented throughout this work for optimizing the above-mentioned variables. To evaluate the aforementioned goal, two objective functions which comprises the power output ( W ) and cycle efficiency ( ) have been included in the optimization process simultaneously.
    Keywords: Other low-carbon energy technologies
    Print ISSN: 1748-1317
    Electronic ISSN: 1748-1325
    Topics: Energy, Environment Protection, Nuclear Power Engineering , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Published by Oxford University Press
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    PAPER CURRENT
  • 18
    facet.materialart.
    Unknown
    Mitigation countermeasures to face urban warming (2015)
    Oxford University Press
    Details
    Publication Date: 2015-02-12
    Keywords: Other low-carbon energy technologies
    Print ISSN: 1748-1317
    Electronic ISSN: 1748-1325
    Topics: Energy, Environment Protection, Nuclear Power Engineering , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Published by Oxford University Press
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    PAPER CURRENT
  • 19
    facet.materialart.
    Unknown
    Alternative Metrics for Comparing Domestic Climate Change Mitigation Efforts and the Emerging International Climate Policy Architecture (2016)
    Oxford University Press
    Details
    Publication Date: 2016-02-03
    Description: The availability of practical mechanisms for comparing domestic efforts aimed at mitigating global climate change is important for the stability, equity, and efficiency of international climate agreements. We examine a variety of metrics that could be used to compare countries’ climate change mitigation efforts and illustrate their potential application to large developed and developing countries. Because there is no single, comprehensive, measurable metric that could be applied to all countries, we suggest using a set of indicators to characterize and compare mitigation effort, akin to using a set of economic statistics to indicate the health of the macroeconomy. Given the iterative pledge-and-review approach that is emerging in the current climate change negotiations, participation, commitment, and compliance could be enhanced if this set of indicators is able to show that all parties are doing their "fair share," both prospectively and retrospectively. The latter, in particular, highlights the need for a well-functioning policy surveillance regime. ( JEL : Q54, Q58, F55)
    Keywords: Q54 - Climate ; Natural Disasters ; Global Warming, Q58 - Government Policy, F55 - International Institutional Arrangements
    Print ISSN: 1750-6816
    Electronic ISSN: 1750-6824
    Topics: Energy, Environment Protection, Nuclear Power Engineering , Political Science , Economics
    Published by Oxford University Press
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    PAPER CURRENT
  • 20
    facet.materialart.
    Unknown
    The European Union Emissions Trading System: Ten Years and Counting (2016)
    Oxford University Press
    Details
    Publication Date: 2016-02-03
    Description: This article provides an introduction to the European Union (EU) Emissions Trading System (ETS). First we describe the legislative development of the EU ETS, its evolution from free allocation to auctioning and centralized allocation rules, its relationship to the Kyoto Protocol and other trading systems, and its relationship to other EU climate and energy policies. This is followed by an assessment of the performance of the EU ETS, which focuses in particular on emissions, allowance prices, and the use of offsets. We conclude with a discussion of the current debate about the future of the EU ETS and proposals for changes to both the EU ETS and the climate policy environment in which it operates. ( JEL : Q54, Q58)
    Keywords: Q54 - Climate ; Natural Disasters ; Global Warming, Q58 - Government Policy
    Print ISSN: 1750-6816
    Electronic ISSN: 1750-6824
    Topics: Energy, Environment Protection, Nuclear Power Engineering , Political Science , Economics
    Published by Oxford University Press
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    PAPER CURRENT
  • 21
    facet.materialart.
    Unknown
    The Climate Change Adaptation Literature (2016)
    Oxford University Press
    Details
    Publication Date: 2016-02-03
    Description: The December 2015 Conference of the Parties (COP) to the United Nations Framework Convention on Climate Change meetings in Paris are likely to yield a global agreement that will slow the world’s growth of greenhouse gas emissions, but this agreement is unlikely to guarantee a decline in global emissions in the near future. Given this reality, climate change adaptation is an increasingly important topic for discussion and study. Although much research has focused on the macroeconomic relationship between economic growth and temperature at the national and/or annual level, microeconomic analysis also offers valuable insights. This Reflections discusses recent work on household and firm responses to three climate change challenges: increased summer heat, higher food prices, and increased natural disaster risk. ( JEL : Q54)
    Keywords: Q54 - Climate ; Natural Disasters ; Global Warming
    Print ISSN: 1750-6816
    Electronic ISSN: 1750-6824
    Topics: Energy, Environment Protection, Nuclear Power Engineering , Political Science , Economics
    Published by Oxford University Press
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    PAPER CURRENT
  • 22
    facet.materialart.
    Unknown
    Control of micro-CHP and thermal energy storage for minimising electrical grid utilisation (2016)
    Oxford University Press
    Details
    Publication Date: 2016-02-05
    Description: The efficient use of combined heat and power (CHP) systems in buildings presents a control challenge due to their simultaneous production of thermal and electrical energy. The use of thermal energy storage coupled with a CHP engine provides an interesting solution to the problem—the electrical demands of the building can be matched by the CHP engine, while the resulting thermal energy can be regulated by the thermal energy store. Based on the thermal energy demands of the building the thermal store can provide extra thermal energy or absorb surplus thermal energy production. This paper presents a multi-input multi-output inverse-dynamics-based control strategy that will minimise the electrical grid utilisation of a building, while simultaneously maintaining a defined operative temperature. Electrical demands from lighting and appliances within the building are considered. In order to assess the performance of the control strategy, a European Standard validated simplified dynamic building physics model is presented that provides verified heating demands. Internal heat gains from solar radiation and internal loads are included within the model. Results indicate the control strategy is effective in minimising the electrical grid use and maximising the utilisation of the available energy when compared with conventional heating systems.
    Keywords: Other low-carbon energy technologies
    Print ISSN: 1748-1317
    Electronic ISSN: 1748-1325
    Topics: Energy, Environment Protection, Nuclear Power Engineering , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Published by Oxford University Press
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    PAPER CURRENT
  • 23
    facet.materialart.
    Unknown
    Thermodynamic optimization of a triple-shaft open intercooled, recuperated gas turbine cycle. Part 2: power and efficiency optimization (2016)
    Oxford University Press
    Details
    Publication Date: 2016-02-05
    Description: The power and the efficiency of a triple-shaft open intercooled, recuperated gas turbine cycle are analyzed and optimized based on the model established using thermodynamic optimization theory in Part 1 of this paper by adjusting the low-pressure compressor inlet relative pressure drop, the mass flow rate and the distribution of pressure losses along the flow path. First, the power output is optimized by adjusting the intercooling pressure ratio, the air mass flow rate or the distribution of pressure losses along the flow path. Second, the thermodynamic first-law efficiency is optimized subject to a fixed fuel flow rate and a fixed overall size by seeking the optimal intercooling pressure ratio, the compressor inlet pressure drop and optimal flow area allocation ratio between the low-pressure compressor inlet and the power turbine outlet. The numerical examples show that increase in effectiveness of intercooler increases power output and its corresponding efficiency and increase in effectiveness of recuperator decreases power output appreciably but increases its corresponding efficiency; there exist an optimal low-pressure compressor inlet relative pressure drop and an optimal intercooling pressure ratio, which lead to a maximum power. For a fixed fuel mass rate and a fixed overall area of low-pressure compressor inlet and power turbine outlet, maximum thermodynamic first-law efficiency is obtained by optimizing low-pressure compressor inlet relative pressure drop and intercooling pressure ratio. The double-maximum thermodynamic first-law efficiency is obtained by searching optimal flow area allocation between low-pressure compressor inlet and power turbine outlet.
    Keywords: Other low-carbon energy technologies
    Print ISSN: 1748-1317
    Electronic ISSN: 1748-1325
    Topics: Energy, Environment Protection, Nuclear Power Engineering , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Published by Oxford University Press
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    PAPER CURRENT
  • 24
    facet.materialart.
    Unknown
    Transient simulation of a solar absorption cooling system (2016)
    Oxford University Press
    Details
    Publication Date: 2016-02-05
    Description: With non-renewable energy sources depleting quickly, solar energy could prove a viable option owing to its abundance and eco-friendliness. Modeling and simulation of a solar energy-driven single-stage absorption chiller was carried out using the transient simulation software ‘TRNSYS’. An evacuated tube collector coupled with an insulated tank served as heat source for the absorption chiller. Experiments were conducted to evaluate the efficiency parameters of the collector as well as the loss coefficient for the storage tank. These parameters along with standard chiller performance data were used to model the system. The influence of climatic conditions, storage capacity and various control schemes with and without auxiliary heating on the output of the system is analyzed and presented in the paper.
    Keywords: Other low-carbon energy technologies
    Print ISSN: 1748-1317
    Electronic ISSN: 1748-1325
    Topics: Energy, Environment Protection, Nuclear Power Engineering , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Published by Oxford University Press
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    PAPER CURRENT
  • 25
    facet.materialart.
    Unknown
    Thermochemical cooling system based on adsorption pumping pipe (2016)
    Oxford University Press
    Details
    Publication Date: 2016-02-05
    Description: Based upon the theoretical principle of the thermochemical energy storage pumping pipe system, a new cooling system has been presented. In order to analyse the performance and design of the system based on adsorption pumping pipe process, a simplified mathematical model is developed. Both simulation and experimental results are given and discussed. The comparison of various methods (ammonium dissolves, evaporation of CO 2 , etc.) showed that it is the simplest and most reliable to use adsorbents such as zeolite in this cooling system. A total of 250 g zeolite 13X could reduce the temperature of 330 ml by 15°C in 2–3 min (for beverage self-cooling applications). For future work, a large scale demonstration system is required to prove the viability and long term performance of thermochemical cooling/energy storage system.
    Keywords: Other low-carbon energy technologies
    Print ISSN: 1748-1317
    Electronic ISSN: 1748-1325
    Topics: Energy, Environment Protection, Nuclear Power Engineering , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Published by Oxford University Press
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    PAPER CURRENT
  • 26
    facet.materialart.
    Unknown
    Thermodynamic optimization of a triple-shaft open intercooled-recuperated gas turbine cycle. Part 1: description and modeling (2016)
    Oxford University Press
    Details
    Publication Date: 2016-02-05
    Description: Considering the flow processes of the working fluid with the pressure drops, a thermodynamic model for a triple-shaft open intercooled-recuperated gas turbine cycle is established using thermodynamic optimization theory in Part 1 of this paper. The relative pressure drops associated with the flow through various cross-sectional areas are derived as functions of the low-pressure compressor inlet relative pressure drop. The analytical formulae of the cycle's power and efficiency are derived. The performance of the model cycle is optimized by adjusting the compressor inlet pressure, the mass flow rate and the distribution of pressure losses along the flow path in Part 2 of this paper.
    Keywords: Other low-carbon energy technologies
    Print ISSN: 1748-1317
    Electronic ISSN: 1748-1325
    Topics: Energy, Environment Protection, Nuclear Power Engineering , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Published by Oxford University Press
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    PAPER CURRENT
  • 27
    facet.materialart.
    Unknown
    Analysis of a SrCl2-NH3 solid sorption refrigeration system (2015)
    Oxford University Press
    Details
    Publication Date: 2015-11-07
    Description: The performance of a solid sorption refrigeration system that uses SrCl 2 and NH 3 as the working pair is analysed based on the heat and mass transfer aspects of the solid sorbent reactors (absorber/generator). The transient, heat and mass transfer model duly considers the effects of reactor wall mass and contact conductance between the reactor wall and the bed. A decent comparison is obtained between the theoretical results and published experimental results on a reactor. The complete system consisting of two absorber/generators, condenser, expansion valve and evaporator is then analysed using the heat and mass transfer model of the reactors. Results are obtained in terms of the coefficient of performance (COP) and specific cooling power (SCP). Results show the possibility of optimizing the bed and operating parameters so as to obtain high COP and/or SCP. The bed thickness, sink temperature and the global reaction advancement are found to affect the performance of the system significantly.
    Keywords: Other low-carbon energy technologies
    Print ISSN: 1748-1317
    Electronic ISSN: 1748-1325
    Topics: Energy, Environment Protection, Nuclear Power Engineering , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Published by Oxford University Press
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    PAPER CURRENT
  • 28
    facet.materialart.
    Unknown
    Energy savings analysis of fuel-cell microgeneration systems with ground source heat pumps in load-sharing buildings (2015)
    Oxford University Press
    Details
    Publication Date: 2015-11-07
    Description: This paper presents the potential energy savings of implementing a combination of fuel-cell microgeneration (FCMG) systems and ground source heat pump (GSHP) systems in load-sharing buildings. The energy modeling and simulation technology is used to evaluate the effectiveness of FCMG systems in buildings. There are a number of simulation programs to evaluate the performance of buildings with various electric, mechanical and thermal systems. However, it is still a challenge to model and simulate the FCMG systems using the existing whole-building simulation programs. This paper first overviews the current technology of simulation modeling of FCMG, and then presents the results of energy savings analyses obtained from the FCMG systems.
    Keywords: Fuel cells systems
    Print ISSN: 1748-1317
    Electronic ISSN: 1748-1325
    Topics: Energy, Environment Protection, Nuclear Power Engineering , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Published by Oxford University Press
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    PAPER CURRENT
  • 29
    facet.materialart.
    Unknown
    Power and power density analyzes of an endoreversible modified variable-temperature reservoir Brayton cycle with isothermal heat addition (2016)
    Oxford University Press
    Details
    Publication Date: 2016-02-05
    Description: The mistakes in recent literatures are analyzed, and a new model for an endoreversible closed modified Brayton cycle with isothermal heat addition coupled to variable-temperature reservoirs is established using finite-time thermodynamics in this paper. The range of isothermal heat addition modification is determined, and the analytical formulae of the dimensionless power output, thermal efficiency and dimensionless power density of the cycle are derived. The effects of the cycle parameters on the global performances of power output and power density and the performances at maximum power design and maximum power density are analyzed by numerical calculations. The results show that there exist optimal compressor pressure ratios, respectively, which lead to maximum dimensionless power output and maximum dimensionless power density, that the optimal compressor pressure ratio and the thermal efficiency at maximum power design are always smaller than the corresponding ones at maximum power density design, and that dimensionless power output and maximum specific volume at maximum power design are always bigger than the corresponding ones at maximum power density design. The results imply that the power density design possesses the advantages such as smaller equipment volume and higher thermal efficiency at the cost of disadvantages such as bigger compressor pressure ratio and power output loss. Maximizing the power density gives a compromise between power and the size of the engine. The calculations also show that an endoreversible closed modified Brayton cycle with isothermal heat addition cannot work at the maximum thermal efficiency design point.
    Keywords: Other low-carbon energy technologies
    Print ISSN: 1748-1317
    Electronic ISSN: 1748-1325
    Topics: Energy, Environment Protection, Nuclear Power Engineering , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Published by Oxford University Press
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    PAPER CURRENT
  • 30
    facet.materialart.
    Unknown
    Effects of thermocouples physical size on the performance of the TEG-TEH system (2016)
    Oxford University Press
    Details
    Publication Date: 2016-08-26
    Description: The effects of thermocouples physical size on the performance of a thermoelectric heat pump (TEH) driven by a thermoelectric generator (TEG) device are investigated in this article. The physical size refers to the length and the cross-sectional area of the thermocouples. The performance analysis is multiobjective, including stable electrical current, heating load, coefficient of performance, maximum heating load and maximum heating temperature difference. A characteristic parameter, i.e. area–length ratio, is defined to describe the thermocouples physical size. The influences of the parameter are analyzed by detailed numerical examples. A practical example is proposed to show how to select appropriate thermoelectric modules (TEMs) to construct a high-performance TEG–TEH system satisfying different requirements. The results show that an improvement in its performance is possible by optimizing internal physical size of thermocouples. The conclusion obtained could be used for the selection of TEMs and the design of the TEG–TEH system.
    Keywords: Other low-carbon energy technologies
    Print ISSN: 1748-1317
    Electronic ISSN: 1748-1325
    Topics: Energy, Environment Protection, Nuclear Power Engineering , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Published by Oxford University Press
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    PAPER CURRENT
  • 31
    facet.materialart.
    Unknown
    Effect of the working liquid to the capillary pumped loop performance (2016)
    Oxford University Press
    Details
    Publication Date: 2016-08-26
    Description: The purpose of this paper is to present a theoretical analysis of the capillary pumped loop (CPL) performance using different working liquids. CPL is a passive heat transfer device, using no mechanical pump to circulate the working liquid, usually composed of a liquid tank, an evaporator, a condenser, a liquid and a vapor line. Heat load is applied on the external surface of the evaporator, partially transferred to the wick inside. Because of this heat load capillary forces are developed inside the porous structure, due to meniscus formation between liquid and vapor surface of the liquid, causing a pressure oscillation capable to pump the flow out of the evaporator. In this paper CPL performance is evaluated using different working liquids, such as water, ammonia, acetone and freon-134. These have different thermophysical properties such as latent heat, viscosity and density, causing different behavior when used as working liquid. Water was found more stable for higher temperature differences, due to higher latent heat of vaporization, while ammonia could take advantage of its viscosity for small temperature differences.
    Keywords: Other low-carbon energy technologies
    Print ISSN: 1748-1317
    Electronic ISSN: 1748-1325
    Topics: Energy, Environment Protection, Nuclear Power Engineering , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Published by Oxford University Press
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    PAPER CURRENT
  • 32
    facet.materialart.
    Unknown
    Design and optimization of a thermoacoustic heat engine using reinforcement learning (2016)
    Oxford University Press
    Details
    Publication Date: 2016-08-26
    Description: The thermoacoustic heat engine (TAHE) is a type of prime mover that converts thermal power to acoustic power. It is composed of two heat exchangers (the devices heat source and sink), some kind of porous medium where the conversion of power takes place and a tube that houses the acoustic wave produced. Its simple design and the fact that it is one of a few prime movers that do not require moving parts make such a device an attractive alternative for many practical applications. The acoustic power produced by the TAHE can be used to generate electricity, drive a heat pump or a refrigeration system. Although the geometry of the TAHE is simple, the behavior of the engine is complex with 30+ design parameters that affect the performance of the device; therefore, designing such a device remains a significant challenge. In this work, a radical design methodology using reinforcement learning (RL) is employed for the design and optimization of a TAHE for the first time. Reinforcement learning is a machine learning technique that allows optimization by specifying ‘good’ and ‘bad’ behavior using a simple reward scheme r . Although its framework is simple, it has proved to be a very powerful tool in solving a wide range of complex decision-making/optimization problems. The RL technique employed by the agent in this work is known as Q-learning. Preliminary results have shown the potential of the RL technique to solve this type of complex design problem, as the RL agent was able to figure out the correct configuration of components that would create positive acoustic power output. The learning agent was able to create a design that yielded an acoustic power output of 643.31 W with a thermal efficiency of 3.29%. It is eventually hoped that with increased understanding of the design problem, in terms of the RL framework, it will be possible to ultimately create an autonomous RL agent for the design and optimization of complex TAHEs with minimal predefined conditions/restrictions.
    Keywords: Other low-carbon energy technologies
    Print ISSN: 1748-1317
    Electronic ISSN: 1748-1325
    Topics: Energy, Environment Protection, Nuclear Power Engineering , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Published by Oxford University Press
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    PAPER CURRENT
  • 33
    facet.materialart.
    Unknown
    Catalytic CO2 conversion via solar-driven fluidized bed reactors (2014)
    Oxford University Press
    Details
    Publication Date: 2014-05-15
    Description: Converting CO 2 and steam (H 2 O) into synthesis gas is a new route to recycle them to fuels. Conversions are performed via a two-step conversion method in which catalysts are heated up and cooled down repeatedly with CO and H 2 as the products. To make the method economic, solar energy is employed to drive conversion systems. A solar-driven system with fluidized bed reactors is proposed for CO 2 conversion in this paper, and numerical models are built to study its performance and find out the optimum working condition. The investigation proves that system is a competent candidate to power the two-step conversion of CO 2 for the carbon recycle and the syngas production.
    Keywords: Other low-carbon energy technologies
    Print ISSN: 1748-1317
    Electronic ISSN: 1748-1325
    Topics: Energy, Environment Protection, Nuclear Power Engineering , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Published by Oxford University Press
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    PAPER CURRENT
  • 34
    facet.materialart.
    Unknown
    Performance and defrosting effect study on the air-to-water heat pump with heat storage device (2014)
    Oxford University Press
    Details
    Publication Date: 2014-05-15
    Description: The heat storage device is proposed to avoid the frequent on–off state under partial load, large variation of the supply and return water temperature and long defrosting time of air-to-water heat pump with plate heat exchanger for heating. The heat storage device is composed of a water tank, the inner double-pipe heat exchanger, appendages and the electric heater. The energy storage can reduce on–off times of the compressor. The energy storage and the electric heater can make up the shortage of heating during defrosting. Performance test shows that on–off times for the heat storage device unit compressor under partial load is about four times per hour compared six times per hour for the plate heat exchange unit. Defrosting time is reduced by 78 s by heat storage device unit and 84 s by heat storage device with electric heater unit. More steady running parameters, inlet heating water temperature of heat storage device or heat storage device with electric heater unit is about 35°C, while that of plate heat exchanger reduces to 30.73°C. Therefore, the designed heat storage device can improve the unit performance and is suitable for the new projects with air-to-water heat pumps.
    Keywords: Other low-carbon energy technologies
    Print ISSN: 1748-1317
    Electronic ISSN: 1748-1325
    Topics: Energy, Environment Protection, Nuclear Power Engineering , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Published by Oxford University Press
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    PAPER CURRENT
  • 35
    facet.materialart.
    Unknown
    Solar Geoengineering's Brave New World: Thoughts on the Governance of an Unprecedented Technology (2014)
    Oxford University Press
    Details
    Publication Date: 2014-07-23
    Description: Due to the failure of international efforts to limit atmospheric concentrations of greenhouse gases, consideration is now being given to solar geoengineering—a deliberate intervention to limit global warming without altering the atmospheric concentration of greenhouse gases. In contrast to emission cuts, geoengineering is expected to be cheap, quick to lower temperature, and feasible through the use of a single intervention. However, geoengineering is an imperfect substitute for emission reductions and will likely have undesirable side effects, only some of which can be anticipated before geoengineering is deployed. Most importantly, because geoengineering can be undertaken unilaterally, it creates issues of governance: Who gets to decide if, when, and how geoengineering should be attempted? This article provides an introduction to the key issues surrounding the governance of this unprecedented technology. ( JEL : Q54, F53, K33)
    Keywords: Q54 - Climate ; Natural Disasters ; Global Warming, F53 - International Agreements and Observance ; International Organizations, K33 - International Law
    Print ISSN: 1750-6816
    Electronic ISSN: 1750-6824
    Topics: Energy, Environment Protection, Nuclear Power Engineering , Political Science , Economics
    Published by Oxford University Press
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    PAPER CURRENT
  • 36
    facet.materialart.
    Unknown
    Climate Policy: Science, Economics, and Extremes (2014)
    Oxford University Press
    Details
    Publication Date: 2014-07-23
    Description: Climate scientists, and natural scientists more generally, believe that climate change is a major, perhaps the most important, problem facing humankind this century, and that it is increasingly linked to extreme weather events. However, the impression one gets from much of the economic literature, particularly simulations from integrated assessment models used in policy analysis, is that the potential impacts of climate change are not large enough to warrant aggressive mitigation efforts in the near term. Although these models represent an important step in the needed interdisciplinary analysis of climate change by elucidating the links between climate and economy, we argue that they grossly underestimate potential impacts and associated damages because they (and the related policy analyses) fail to adequately capture extreme conditions, catastrophic events, and tipping points that trigger irreversible changes in the climate system, as well as impacts on the natural environment that cannot be monetized. Because the most severe impacts are expected in the later years of this century and beyond, discounting is crucial, and we argue that the appropriate rate is well below market rates. Moreover, we show that in the uniquely long period relevant to climate policy, the irreversibility of climate changes and impacts is more serious than the irreversibility of proposed mitigation measures. We conclude that an aggressive mitigation policy is warranted, one that holds further increases in global mean temperature to the scientific consensus on what is required to avoid the worst impacts, and that such a policy can be achieved at a cost that is well below potential damages. ( JEL : Q54)
    Keywords: Q54 - Climate ; Natural Disasters ; Global Warming
    Print ISSN: 1750-6816
    Electronic ISSN: 1750-6824
    Topics: Energy, Environment Protection, Nuclear Power Engineering , Political Science , Economics
    Published by Oxford University Press
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    PAPER CURRENT
  • 37
    facet.materialart.
    Unknown
    Multisource heat pump system from design to operation: the case study of a new school building (2013)
    Oxford University Press
    Details
    Publication Date: 2013-05-09
    Description: Heat pump features can take advantage of better sources than air, for instance the ground heat, solar heat and heat recovery. A multisource system aims to enhance the performances of the heat pump, leading to a significant amount of primary energy being saved. The present work shows data monitoring and analysis for a real working application in northern Italy, for 12 months. The energy balance indicates that the integration of different sources not only increases the thermal performance of the system as a whole but also optimizes the use of each source.
    Keywords: Other low-carbon energy technologies
    Print ISSN: 1748-1317
    Electronic ISSN: 1748-1325
    Topics: Energy, Environment Protection, Nuclear Power Engineering , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Published by Oxford University Press
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    PAPER CURRENT
  • 38
    facet.materialart.
    Unknown
    A preliminary testing of a flat panel ground heat exchanger (2013)
    Oxford University Press
    Details
    Publication Date: 2013-05-09
    Description: An experimental setup is devised to investigate the behaviour of a novel type of a horizontal ground heat exchanger (HGHE). The prototype is named ‘flat panel’ and is coupled with a hydraulic closed loop in which warm water is circulating to express the cooling mode from a reversible-cycle heat pump. Several thermal sensors are employed in the experimental field to monitor the ground temperature distribution and the fluid. The behaviour was tested during the summer of 2011, in the continuous and discontinuous operating mode. The HGHE behaviour was monitored in dry and wet conditions; the latter were induced with a dedicated irrigation system. The heat power for the unit exchanging surface dropped down from 140 to 40 W per metre of trench, moving from the start-up to the last period, late in the summer. The minimum was achieved in very hot conditions after long time in the continuous operating mode. When the working mode was switched to discontinuous, the power increased quickly over 50 W/m. Finally, the soil temperature was significantly altered up to 3 m far from the exchanger, and without over-heating conditions at the soil surface. The flat panel was able to involve a large soil volume, and this behaviour in turn enables high-energy performance, at least in the cooling mode.
    Keywords: Other low-carbon energy technologies
    Print ISSN: 1748-1317
    Electronic ISSN: 1748-1325
    Topics: Energy, Environment Protection, Nuclear Power Engineering , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Published by Oxford University Press
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    PAPER CURRENT
  • 39
    facet.materialart.
    Unknown
    Dynamic thermal modelling of horizontal ground-source heat pumps (2013)
    Oxford University Press
    Details
    Publication Date: 2013-05-09
    Description: A computer program has been developed for numerical simulation of the dynamic thermal performance of horizontally coupled heat exchangers for ground-source heat pumps, taking account of dynamic variations of climatic, load and soil conditions. The program was used to investigate the effects of operating and start times, installation depth and soil freezing on the heat exchanger performance. It is shown that the rate of heat extraction decreases with increasing operating time. Operating a heat pump with an earlier start date in autumn would give rise to a higher amount of cumulative heat extraction. Also, a heat exchanger installed at a shallower depth can provide a larger heat extraction rate at the early stage of heating operation. In addition, soil freezing enhances heat extraction.
    Keywords: Other low-carbon energy technologies
    Print ISSN: 1748-1317
    Electronic ISSN: 1748-1325
    Topics: Energy, Environment Protection, Nuclear Power Engineering , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Published by Oxford University Press
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    PAPER CURRENT
  • 40
    facet.materialart.
    Unknown
    Characterization of heat transport processes in geothermal systems (2013)
    Oxford University Press
    Details
    Publication Date: 2013-05-09
    Description: Experimental field tests as well as laboratory tests have been conducted. In addition to field tests, a geothermal laboratory device has been developed. With the help of this device, the heat transport processes in different geological and hydrogeological conditions can be simulated. The different types of heat transport mechanisms in geothermal systems can be characterized clearly. Furthermore, it is possible to determine the increase of the effective thermal conductivity of a line source with rising groundwater flow velocities. With the geothermal data gathered, common numerical programs are verified and optimized. Therefore, all measured data are reconsidered by numerical back analysis.
    Keywords: Other low-carbon energy technologies
    Print ISSN: 1748-1317
    Electronic ISSN: 1748-1325
    Topics: Energy, Environment Protection, Nuclear Power Engineering , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Published by Oxford University Press
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    PAPER CURRENT
  • 41
    facet.materialart.
    Unknown
    Experimental analysis of an unconventional desiccant-based air-conditioning system: the influence of cooling air flow and chiller on the energy and environmental performance (2015)
    Oxford University Press
    Details
    Publication Date: 2015-11-07
    Description: Nowadays, the increasing demand of summer cooling is typically covered by electric chillers, often determining electric peak loads and black-outs. Thus, a wide interest is spreading in small scale natural gas-fired cogenerators driving desiccant-based air-conditioning systems, which represent interesting alternatives to conventional systems based on vapor compression cooling only. In this article, experimental tests performed on an air handling unit (AHU) equipped with a desiccant wheel (DW), coupled to a small scale cogenerator and an electric chiller are described. A new layout of the desiccant-based AHU is investigated, considering a third flow (the cooling air), besides the process air flow and the regeneration one. A cross-flow heat exchanger between process air and cooling air is used; the cooling air, cooled by an adiabatic humidifier, is aimed to precool the process air exiting the DW. The relevant influence of the heat exchanger and of the humidifier, as well as that of the chiller performance, on global primary energy requirements, water consumption and CO 2 equivalent emissions of the system is experimentally evaluated.
    Keywords: Other low-carbon energy technologies
    Print ISSN: 1748-1317
    Electronic ISSN: 1748-1325
    Topics: Energy, Environment Protection, Nuclear Power Engineering , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Published by Oxford University Press
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    PAPER CURRENT
  • 42
    facet.materialart.
    Unknown
    A sustainable transport solution for a Slovenia town (2015)
    Oxford University Press
    Details
    Publication Date: 2015-11-07
    Description: Authorities in Slovenia and other EU member states are confronted with problems of city transportation. Fossil-fuel-based transport poses two chief problems—local and global pollution, and dwindling supplies and ever-increasing costs. An elegant solution is to gradually replace the present automobile fleet with electric vehicles (EVs). This article explores the economics and practical viability of the provision of solar electricity for the charging of EVs by installation of economical available Photovoltaic modules. A steep decline in the module, inverter and installation costs is reported herein. Present estimates indicate that for the prevailing solar climate of Celje—a medium-sized Slovenian town—the cost would be only 2 euros and 11 cents per kWh of generated solar electricity.
    Keywords: Other low-carbon energy technologies
    Print ISSN: 1748-1317
    Electronic ISSN: 1748-1325
    Topics: Energy, Environment Protection, Nuclear Power Engineering , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Published by Oxford University Press
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    PAPER CURRENT
  • 43
    facet.materialart.
    Unknown
    Cost-effective design of the alkaline electrolyser for enhanced electrochemical performance and reduced electrode degradation (2015)
    Oxford University Press
    Details
    Publication Date: 2015-11-07
    Description: An alkaline electrolyser was developed and characterized. Three different metals, working as the electrode, were analysed using electrochemical methods to determine the best electrochemical performance. The performance of the Stainless Steel (SS316) electrode and the nickel electrode is much better than that of the conventional iron electrode. Degradation analysis of the electrode materials highlighted the need for the material to be durable and resistant to corrosion from an alkaline environment. Through SEM and mass analysis, it is shown that Nickel exhibits the strongest long-term resistance to surface and electrochemical performance degradation, when compared with Mild Steel (Iron) and SS316.
    Keywords: Fuel cells systems
    Print ISSN: 1748-1317
    Electronic ISSN: 1748-1325
    Topics: Energy, Environment Protection, Nuclear Power Engineering , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Published by Oxford University Press
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    PAPER CURRENT
  • 44
    facet.materialart.
    Unknown
    Control system design for micro-tubular solid oxide fuel cells (2015)
    Oxford University Press
    Details
    Publication Date: 2015-11-07
    Description: Fuel cells have been widely studied in the past decades due to their high energy conversion efficiency and low-carbon emissions. Solid oxide fuel cells (SOFCs) work at a high-temperature range, allowing the use of several types of fuels such as natural gas or methane. However, in operation, too high a fuel utilization (FU) leads to a large internal temperature gradient, thus the thermal shock of ceramic cracking; while a very low-FU results in carbon deposition and thus a decrease in the overall efficiency. In this work, a control system was designed for a small-scale micro-tubular SOFC (μ-SOFC) stack by employing the National Instruments™ Labview Programme and Data acquisition (DAQ) 6009 as well as related electronic components which enabled the control of the fuel flow rate for the stack and the temperature inside the furnace. The results showed that a well designed control system can not only improve the overall efficiency but also extend the working life, finally achieving a more economical μ-SOFC system.
    Keywords: Fuel cells systems
    Print ISSN: 1748-1317
    Electronic ISSN: 1748-1325
    Topics: Energy, Environment Protection, Nuclear Power Engineering , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Published by Oxford University Press
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    PAPER CURRENT
  • 45
    facet.materialart.
    Unknown
    Reverse flow in natural convection heat pipe solar water heater (2015)
    Oxford University Press
    Details
    Publication Date: 2015-11-07
    Description: System performance of a natural convection (thermosyphon) solar water heater depends on design and setup of collector and storage tank as well as environmental factors such as solar intensity, ambient temperature and wind conditions. The relative height separating the tank and collector mainly influences the magnitude of the thermosyphon flow rates, including both forward and reverse flow at night. In this experimental investigation, an array of evacuated tube heat pipe solar collectors was connected to an insulated hot water storage tank. The effect of the separation height between tank and collectors was investigated and reported. Thermosyphon water flow rates were measured using a dye-injection procedure in both forward and reverse flow directions. The results showed that reverse flow always occurred in the evenings and was about 5–11 times less than forward flow. The overnight mean water temperature drop was independent of the height separating the collectors and storage tank and ranged between 2 and 10°C. The temperature drop was greater when the night was cooler.
    Keywords: Other low-carbon energy technologies
    Print ISSN: 1748-1317
    Electronic ISSN: 1748-1325
    Topics: Energy, Environment Protection, Nuclear Power Engineering , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Published by Oxford University Press
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    PAPER CURRENT
Close ⊗
This website uses cookies and the analysis tool Matomo. More information can be found here...