Publication Date:
2015-05-31
Description:
A 3-D magnetotelluric (MT) inversion code using unstructured tetrahedral elements has been developed in order to correct the topographic effect by directly incorporating it into computational grids. The electromagnetic field and response functions get distorted at the observation sites of MT surveys because of the undulating surface topography, and without correcting this distortion, the subsurface structure can be misinterpreted. Of the two methods proposed to correct the topographic effect, the method incorporating topography explicitly in the inversion is applicable to a wider range of surveys. For forward problems, it has been shown that the finite element method using unstructured tetrahedral elements is useful for the incorporation of topography. Therefore, this paper shows the applicability of unstructured tetrahedral elements in MT inversion using the newly developed code. The inversion code is capable of using the impedance tensor, the vertical magnetic transfer function (VMTF), and the phase tensor as observational data, and it estimates the subsurface resistivity values and the distortion tensor of each observation site. The forward part of the code was verified using two test models, one incorporating topographic effect and one without, and the verifications showed that the results were almost the same as those of previous works. The developed inversion code was then applied to synthetic data from a MT survey, and was verified as being able to recover the resistivity structure as well as other inversion codes. Finally, to confirm its applicability to the data affected by topography, inversion was performed using the synthetic data of the model that included two overlapping mountains. In each of the cases using the impedance tensor, the VMTF and the phase tensor, by including the topography in the mesh, the subsurface resistivity was determined more proficiently than in the case using the flat-surface mesh. Although the locations of the anomalies were not accurately estimated by the inversion using distorted impedance tensors due to the slightly undervalued gain, these locations were correctly estimated by using undistorted impedance tensors or adding VMTFs in the data. Therefore, it can be concluded that the inversion using the unstructured tetrahedral element effectively prevents the misinterpretation of subsurface resistivity and recovers subsurface resistivity proficiently by representing the topography in the computational mesh.
Keywords:
Geomagnetism, Rock Magnetism and Palaeomagnetism
Print ISSN:
0956-540X
Electronic ISSN:
1365-246X
Topics:
Geosciences
Published by
Oxford University Press
on behalf of
The Deutsche Geophysikalische Gesellschaft (DGG) and the Royal Astronomical Society (RAS).
