ALBERT

Description: Projective transformation of spheres onto images produce ellipses, whose centers do not coincide with the projected center of the sphere. This results in an eccentricity error, which must be treated in high precision metrology. This article provides closed formulations for modeling this error in images to enable 3-dimensional (3D) reconstruction of the center of spherical objects. The article also provides a new direct robust method for detecting spherical pattern in point clouds. It was shown that the eccentricity error in an image has only one component in the direction of the major axis of the ellipse. It was also revealed that the eccentricity is zero if and only if the center of the projected sphere lies on the camera’s perspective center. The effectiveness of the robust sphere detection and the eccentricity error modeling method was evaluated on simulated point clouds of spheres and real-world images, respectively. It was observed that the proposed robust sphere fitting method outperformed the popular M-estimator sample consensus in terms of radius and center estimation accuracy by a factor of 13, and 14 on average, respectively. Using the proposed eccentricity adjustment, the estimated 3D center of the sphere using modeled eccentricity was superior to the unmodeled case. It was also observed that the accuracy of the estimated 3D center using modeled eccentricity continuously improved as the number of images increased, whereas the unmodeled eccentricity did not show improvements after eight image views. The results of the investigation show that: (i) the proposed method effectively modeled the eccentricity error, and (ii) the effects of eliminating the eccentricity error in the 3D reconstruction become even more pronounced in a larger number of image views.

Description: In watershed mountain basins, affected in the last decades by strong rainfall events, the role of debris-flow and debris flood processes was investigated. Morphometric parameters have proven to be useful first-approximation indicators in discriminating those processes, especially in large areas of investigation. Computation of morphometric parameters in 19 watershed mountain basins of the western side valley of the Vallo di Diano intermontane basin (southern Italy) was carried out. This procedure was integrated by a semi-automatic elaboration of the potential susceptibility to debris flows, using Flow-R modelling. This software, providing an empirical model of the preliminary susceptibility assessment at a regional scale, was applied in many countries of the world. The implementation of Flow-R modelling requires a GIS application and some thematic base maps extracted using DEMs analysis. A 5-meter-resolution DEM has been used in order to produce the susceptibility maps of the whole study area, and the results are compared and discussed with the real debris flow/flood events that occurred in 1993, 2005, 2010, and 2017 in the studied area. The results have provided a good reliability of Flow-R modelling within small catchment mountain basins.

Description: Deformation monitoring has been brought to the fore and extensively studied in recent years. Global Navigation Satellite System Reflectometry (GNSS-R) techniques have so far been developed in deformation estimation applications, which however, are subject to the influence of mobile satellites. Rather than compensating for the path delay variations caused by mobile satellites, adopting Beidou geostationary Earth orbit (GEO) satellites as transmitters directly eliminates the satellite-motion-induced phase error and thus provides access to stable phase information. This paper presents a novel deformation monitoring concept based on GNSS-R utilizing Beidou GEO satellites. The geometrical properties of the GEO-based bistatic GNSS radar system are explored to build a theoretical connection between deformation quantity and the echo carrier phases. A deformation retrieval algorithm is proposed based on the supporting software receiver, thus allowing echo carrier phases to be extracted and utilized in deformation retrieval. Two field validation experiments are conducted by constructing passive bistatic radars with reflecting plates and ground receiver. Utilizing the proposed algorithm, the experimental results suggested that the GEO-based GNSS reflectometry can achieve deformation estimations with an accuracy of around 1 cm when the extracted phases does not exceed one complete cycle, while better than 3 cm when considering the correct integer number of phase cycles. Consequently, based on the passive bistatic radar system, the potential of achieving continuous, low-cost deformation monitoring makes this novel technique noteworthy.

Description: The paper presents a comparative analysis of recent collision avoidance and real-time path planning algorithms for ships. Compared methods utilize radar remote sensing for target ships detection. Different recently introduced approaches are briefly described and compared. An emphasis is put on input data reception using a radar as a remote sensing device applied in order to detect moving obstacles such as encountered ships. The most promising methods are highlighted and their advantages and limitations are discussed. Concluding remarks include proposals of further research directions in the development of collision avoidance methods utilizing radar remote sensing.

Description: Suffering from hardware phase biases originating from satellites and the receiver, precise point positioning (PPP) requires a long convergence time to reach centimeter coordinate accuracy, which is a major drawback of this technique and limits its application in time-critical applications. Ambiguity resolution (AR) is the key to a fast convergence time and a high-precision solution for PPP technology and PPP AR products are critical to implement PPP AR. Nowadays, various institutions provide PPP AR products in different forms with different strategies, which allow to enable PPP AR for Global Positioning System (GPS) and Galileo or BeiDou Navigation System (BDS). To give a full evaluation of PPP AR performance with various products, this work comprehensively investigates the positioning performance of GPS-only and multi-GNSS (Global Navigation Satellite System) combination PPP AR with the precise products from CNES, SGG, CODE, and PRIDE Lab using our in-house software. The positioning performance in terms of positioning accuracy, convergence time and fixing rate (FR) as well as time to first fix (TTFF), was assessed by static and kinematic PPP AR models. For GPS-only, combined GPS and Galileo PPP AR with different products, the positioning performances were all comparable with each other. Concretely, the static positioning errors can be reduced by 21.0% (to 0.46 cm), 52.5% (to 0.45 cm), 10.0% (to 1.33 cm) and 21.7% (to 0.33 cm), 47.4% (to 0.34 cm), 9.5% (to 1.16 cm) for GPS-only and GE combination in north, east, up component, respectively, while the reductions are 20.8% (to 1.13 cm), 42.9% (to 1.15 cm), 19.9% (to 3.4 cm) and 20.4% (to 0.72 cm), 44.1% (to 0.66 cm), 10.1% (to 2.44 cm) for kinematic PPP AR. Overall, the positioning performance with CODE products was superior to the others. Furthermore, multi-GNSS observations had significant improvements in PPP performance with float solutions and the TTFF as well as the FR of GPS PPP AR could be improved by adding observations from other GNSS. Additionally, we have released the source code for multi-GNSS PPP AR, anyone can freely access the code and example data from GitHub.

Description: In terms of land cover classification, optical images have been proven to have good classification performance. Synthetic Aperture Radar (SAR) has the characteristics of working all-time and all-weather. It has more significant advantages over optical images for the recognition of some scenes, such as water bodies. One of the current challenges is how to fuse the benefits of both to obtain more powerful classification capabilities. This study proposes a classification model based on random forest with the conditional random fields (CRF) for feature-level fusion classification using features extracted from polarized SAR and optical images. In this paper, feature importance is introduced as a weight in the pairwise potential function of the CRF to improve the correction rate of misclassified points. The results show that the dataset combining the two provides significant improvements in feature identification when compared to the dataset using optical or polarized SAR image features alone. Among the four classification models used, the random forest-importance_ conditional random fields (RF-Im_CRF) model developed in this paper obtained the best overall accuracy (OA) and Kappa coefficient, validating the effectiveness of the method.

Description: Detection of small-sized maritime targets is an important task for a marine surveillance radar. Recently, with the emergence of a marine surveillance radar system that has a narrow azimuth beamwidth and rapidly rotating antennas, the available dwell time for detecting a maritime target is usually very short. This short dwell time considerably degrades the performance of conventional detectors, especially those focusing on small-sized targets. In this paper, we propose an efficient detector for small-sized maritime targets to provide a reliable detection performance, even in short dwell times. The proposed scheme is based on a new joint metric, which results from the product of the magnitude and difference features in the Doppler spectra. We discriminate the target bins from sea clutter bins using a statistical discriminator based on the joint metric, whose probability density function follows the product distribution of standard gamma distributions. Compared to conventional detectors, the proposed scheme can provide a robust performance in terms of the average signal-to-clutter ratio as well as the detection rate, especially in shorter dwell times.

Description: As an approach with great potential, the interpretation of space-borne synthetic aperture radar (SAR) images has been applied for monitoring the dynamic evolution of the glacial lakes in recent years. Considering unfavorable factors, such as inherent topography-induced effects and speckle noise in SAR images, it is challenging to accurately map and track the dynamic evolution of the glacial lakes by using multi-temporal SAR images. This paper presents an improved neighborhood-based ratio method utilizing a time series of SAR images to identify the boundaries of the glacial lakes and detect their spatiotemporal changes. The proposed method was applied to monitor the dynamic evolution of the two glacial lakes with periodic water discharge at the terminus of the Gongba Glacier in the southeastern Tibetan Plateau by utilizing 144 Sentinel-1A SAR images collected between October of 2014 and November of 2020. We first generated the reference intensity image (RII) by averaging all the SAR images collected when the water in the glacial lakes was wholly discharged, then calculated the neighborhood-based ratio between RII and each SAR intensity image, and finally identified the boundaries of the glacial lakes by a ratio threshold determined statistically. The time series of areas of the glacial lakes were estimated in this way, and the dates for water recharging and discharging were accordingly determined. The testing results showed that the water of the two glacial lakes began to be recharged in April and reached their peak in August and then remained stable dynamically until they began to shrink in October and were discharged entirely in February of the following year. We observed the expansion process with annual growth rates of 3.19% and 12.63% for these two glacial lakes, respectively, and monitored a glacial lake outburst flood event in July 2018. The validation by comparing with the results derived from Sentinel-2A/B optical images indicates that the accuracy for identifying the boundaries of the glacial lakes with Sentinel-1A SAR images can reach up to 96.49%. Generally, this contribution demonstrates the reliability and precision of SAR images to provide regular updates for the dynamic monitoring of glacial lakes.

Description: The pixel-based semantic segmentation methods take pixels as recognitions units, and are restricted by the limited range of receptive fields, so they cannot carry richer and higher-level semantics. These reduce the accuracy of remote sensing (RS) semantic segmentation to a certain extent. Comparing with the pixel-based methods, the graph neural networks (GNNs) usually use objects as input nodes, so they not only have relatively small computational complexity, but also can carry richer semantic information. However, the traditional GNNs are more rely on the context information of the individual samples and lack geographic prior knowledge that reflects the overall situation of the research area. Therefore, these methods may be disturbed by the confusion of “different objects with the same spectrum” or “violating the first law of geography” in some areas. To address the above problems, we propose a remote sensing semantic segmentation model called knowledge and spatial pyramid distance-based gated graph attention network (KSPGAT), which is based on prior knowledge, spatial pyramid distance and a graph attention network (GAT) with gating mechanism. The model first uses superpixels (geographical objects) to form the nodes of a graph neural network and then uses a novel spatial pyramid distance recognition algorithm to recognize the spatial relationships. Finally, based on the integration of feature similarity and the spatial relationships of geographic objects, a multi-source attention mechanism and gating mechanism are designed to control the process of node aggregation, as a result, the high-level semantics, spatial relationships and prior knowledge can be introduced into a remote sensing semantic segmentation network. The experimental results show that our model improves the overall accuracy by 4.43% compared with the U-Net Network, and 3.80% compared with the baseline GAT network.

Description: High-spatial-resolution land-surface temperature is required for several applications such as hydrological or climate studies. Global estimates of surface temperature are available from sensors observing in the infrared (IR), but without ‘all-weather’ observing capability. Passive microwave (MW) instruments can also be used to provide surface-temperature measurements but suffer from coarser spatial resolutions. To increase their resolution, a downscaling methodology applicable over different land environments and at any time of the day is proposed. The method uses a statistical relationship between clear sky-predicting variables and clear-sky temperatures to estimate temperature patterns that can be used in conjunction with coarse measurements to create high-resolution products. Different predicting variables are tested showing the need to use IR-derived information on vegetation, temperature diurnal evolution, and a temporal information. To build a true ‘all-weather’ methodology, the effect of clouds on surface temperatures is accounted for by correcting the clear-sky diurnal cycle amplitude, using cloud parameters from meteorological reanalysis. Testing the method on a coarse IR synthetic data at ∼25 km resolution yields a Root Mean Square Deviations (RMSD) between the ∼5 km high-resolution and downscaled temperatures smaller than 1 ∘C. When applied to observations by the Special Sensor Microwave Imager Sounder (SSMIS) at ∼25 km resolution, the downscaling to ∼5 km yields a smaller RMSD compared to IR observations. These results demonstrate the relevance of the methodology to downscale MW land-surface temperature and its potential to spatially enhanced the current ‘all-weather’ satellite monitoring of surface temperatures.

Description: In Ethiopia land degradation through soil erosion is of major concern. Land degradation mainly results from heavy rainfall events and droughts and is associated with a loss of vegetation and a reduction in soil fertility. To counteract land degradation in Ethiopia, initiatives such as the Sustainable Land Management Programme (SLMP) have been implemented. As vegetation condition is a key indicator of land degradation, this study used satellite remote sensing spatiotemporal trend analysis to examine patterns of vegetation between 2002 and 2018 in degraded land areas and studied the associated climate-related and human-induced factors, potentially through interventions of the SLMP. Due to the heterogeneity of the landscapes of the highlands of the Ethiopian Plateau and the small spatial scale at which human-induced changes take place, this study explored the value of using 30 m resolution Landsat data as the basis for time series analysis. The analysis combined Landsat derived Normalised Difference Vegetation Index (NDVI) data with Climate Hazards group Infrared Precipitation with Stations (CHIRPS) derived rainfall estimates and used Theil-Sen regression, Mann-Kendall trend test and LandTrendr to detect changes in NDVI, rainfall and rain-use efficiency. Ordinary Least Squares (OLS) regression analysis was used to relate changes in vegetation directly to SLMP infrastructure. The key findings of the study are a general trend shift from browning between 2002 and 2010 to greening between 2011 and 2018 along with an overall greening trend between 2002 and 2018. Significant improvements in vegetation condition due to human interventions were found only at a small scale, mainly on degraded hillside locations, along streams or in areas affected by gully erosion. Visual inspections (based on Google Earth) and OLS regression results provide evidence that these can partly be attributed to SLMP interventions. Even from the use of detailed Landsat time series analysis, this study underlines the challenge and limitations to remotely sensed detection of changes in vegetation condition caused by land management interventions aiming at countering land degradation.

Description: Intermittently closed and open lakes or Lagoons (ICOLLs) are characterised by entrance barriers that form or break down due to the action of wind, waves and currents until the ocean-lagoon exchange becomes discontinuous. Entrance closure raises a variety of management issues that are regulated by monitoring. In this paper, those issues are investigated, and an automated sensor solution is proposed. Based upon a static Lidar paired with an edge computing device. This solar-powered remote sensing device provides an efficient way to automatically survey the lagoon entrance and estimate the berm profile. Additionally, it estimates the dry notch location and its height, critical factors in the management of the lagoon entrances. Generated data provide valuable insights into landscape evolution and berm behaviour during natural and mechanical breach events.

Description: The age of Mars yardangs is significant in studying their development and the evolution of paleoclimate conditions. For planetary surface or landforms, a common method for dating is based on the frequency and size distribution of all the superposed craters after they are formed. However, there is usually a long duration for the yardangs’ formation, and they will alter the superposed craters, making it impossible to give a reliable dating result with the method. An indirect method by analyzing the ages of the superposed layered ejecta was devised in the research. First, the layered ejecta that are superposed on and not altered by the yardangs are identified and mapped. Then, the ages of the layered ejecta are derived according to the crater frequency and size distribution on them. These ages indicate that the yardangs ceased development by these times, and the ages are valuable for studying the evolution of the yardangs. This indirect dating method was applied to the areas of Martian yardangs in the Medusae Fossae Formation (MFF). The ages of the selected six layered ejecta range from ~0.50 Ga to ~1.5 Ga, indicating that the evolution of the corresponding yardangs had been ceased before these times. Analysis of more layered ejecta craters and superposed yardangs implies that yardangs in the MFF have a long history of development and some yardangs are still in active development.

Description: In the past few decades, target detection from remote sensing images gained from aircraft or satellites has become one of the hottest topics. However, the existing algorithms are still limited by the detection of small remote sensing targets. Benefiting from the great development of computing power, deep learning has also made great breakthroughs. Due to a large number of small targets and complexity of background, the task of remote sensing target detection is still a challenge. In this work, we establish a series of feature enhancement modules for the network based on YOLO (You Only Look Once) -V3 to improve the performance of feature extraction. Therefore, we term our proposed network as FE-YOLO. In addition, to realize fast detection, the original Darknet-53 was simplified. Experimental results on remote sensing datasets show that our proposed FE-YOLO performs better than other state-of-the-art target detection models.

Description: Object detection is a significant and challenging problem in the study of remote sensing. Since remote sensing images are typically captured with a bird’s-eye view, the aspect ratios of objects in the same category may obey a Gaussian distribution. Generally, existing object detection methods ignore exploring the distribution character of aspect ratios for improving performance in remote sensing tasks. In this paper, we propose a novel Self-Adaptive Aspect Ratio Anchor (SARA) to explicitly explore aspect ratio variations of objects in remote sensing images. To be concrete, our SARA can self-adaptively learn an appropriate aspect ratio for each category. In this way, we can only utilize a simple squared anchor (related to the strides of feature maps in Feature Pyramid Networks) to regress objects in various aspect ratios. Finally, we adopt an Oriented Box Decoder (OBD) to align the feature maps and encode the orientation information of oriented objects. Our method achieves a promising mAP value of 79.91% on the DOTA dataset.

Description: Automated damage evaluation is of great importance in the maintenance and preservation of heritage structures. Damage investigation of large cultural buildings is time-consuming and labor-intensive, meaning that many buildings are not repaired in a timely manner. Additionally, some buildings in harsh environments are impossible to reach, increasing the difficulty of damage investigation. Oblique images facilitate damage detection in large buildings, yet quantitative damage information, such as area or volume, is difficult to generate. In this paper, we propose a method for quantitative damage evaluation of large heritage buildings in wild areas with repetitive structures based on drone images. Unlike existing methods that focus on building surfaces, we study the damage of building components and extract hidden linear symmetry information, which is useful for localizing missing parts in architectural restoration. First, we reconstruct a 3D mesh model based on the photogrammetric method using high-resolution oblique images captured by drone. Second, we extract 3D objects by applying advanced deep learning methods to the images and projecting the 2D object segmentation results to 3D mesh models. For accurate 2D object extraction, we propose an edge-enhanced method to improve the segmentation accuracy of object edges. 3D object fragments from multiple views are integrated to build complete individual objects according to the geometric features. Third, the damage condition of objects is estimated in 3D space by calculating the volume reduction. To obtain the damage condition of an entire building, we define the damage degree in three levels: no or slight damage, moderate damage and severe damage, and then collect statistics on the number of damaged objects at each level. Finally, through an analysis of the building structure, we extract the linear symmetry surface from the remaining damaged objects and use the symmetry surface to localize the positions of missing objects. This procedure was tested and validated in a case study (the Jiankou Great Wall in China). The experimental results show that in terms of segmentation accuracy, our method obtains results of 93.23% mAP and 84.21% mIoU on oblique images and 72.45% mIoU on the 3D mesh model. Moreover, the proposed method shows effectiveness in performing damage assessment of objects and missing part localization.

Description: A country can be well-comprehended through its core cities. Similarly, we can learn about a city from its hotspots, as they manifest the concentration of urban infrastructures and human activities. Following this philosophy, this paper studies the intra-urban form and function from a complexity science perspective by exploring the power law distribution of hotspot sizes and related socio-economic attributes. To detect hotspots, we rely on spatial clustering of geospatial big data sets, including street data from OpenStreetMap platform and nighttime light (NTL) data from the visible infrared imaging radiometer suite (VIIRS) imagery. Unlike conventional spatial units, which are imposed by governments or authorities (such as census block), the delineation of hotspots is done in a totally bottom-up manner and, more importantly, can help us examine precisely the scaling pattern of urban morphological and functional aspects. This results in two types of urban hotspots—street-based and NTL-based hotspots—being generated across 20 major cities in China. We find that Zipf’s law of hotspot sizes (both types) holds remarkably well for each city, as do the city-size distributions at the country level, indicating a statistically self-similar structure of geographic space. We further find that the urban scaling law can be effectively detected when using NTL-based hotspots as basic units. Furthermore, the comparison between two types of hotspots enables us to gain in-depth insights of urban planning and urban economic development.

Description: In this paper, land subsidence susceptibility was assessed for Shahryar County in Iran using the adaptive neuro-fuzzy inference system (ANFIS) machine learning algorithm. Another aim of the present paper was to assess if ensembles of ANFIS with two meta-heuristic algorithms (imperialist competitive algorithm (ICA) and gray wolf optimization (GWO)) would yield a better prediction performance. A remote sensing synthetic aperture radar (SAR) dataset from 2019 to 2020 and the persistent-scatterer SAR interferometry (PS-InSAR) technique were used to obtain a land subsidence inventory of the study area and use it for training and testing models. Resulting PS points were divided into two parts of 70% and 30% for training and testing the models, respectively. For susceptibility analysis, eleven conditioning factors were taken into account: the altitude, slope, aspect, plan curvature, profile curvature, topographic wetness index (TWI), distance to stream, distance to road, stream density, groundwater drawdown, and land use/land cover (LULC). A frequency ratio (FR) was applied to assess the correlation of factors to subsidence occurrence. The prediction power of the models and their generated land subsidence susceptibility maps (LSSMs) were validated using the root mean square error (RMSE) value and area under curve of receiver operating characteristic (AUC-ROC) analysis. The ROC results showed that ANFIS-ICA had the best accuracy (0.932) among the models (ANFIS-GWO (0.926), ANFIS (0.908)). The results of this work showed that optimizing ANFIS with meta-heuristics considerably improves LSSM accuracy although ANFIS alone had an acceptable result.

Description: The Sporadic-E (Es) layer is an often-observed phenomenon at high latitudes; however, our understanding of the polar cap Es layer is severely limited due to the scarce number of measurements. Here, the first comprehensive study of the polar cap Es layer associated with Global Positioning System (GPS) Total Electron Content (TEC) variations and scintillations is presented with multiple measurements at Resolute, Canada (Canadian Advanced Digital Ionosonde (CADI), Northward-looking face of Resolute Incoherent-Scatter Radar (RISR-N), and GPS receiver). According to the joint observations, the polar cap Es layer is a thin patch structure with variously high electron density, which gradually develops into the lower E region (~100 km) and horizontally extends 〉200 km. Moreover, the TEC variations produced by the polar cap Es layer are pulse-like enhancements with a general amplitude of ~0.5 TECu and are followed by smaller but rapid TEC perturbations. Furthermore, the possible scintillation effects likely associated with the polar cap Es layer are also discussed. As a consequence, the results widely expand our understanding on the polar cap Es layer, in particular on TEC variations.

Description: With continuous improvement of earth observation technology, source, and volume of remote sensing data are gradually enriched. It is critical to realize unified organization and to form data sharing service capabilities for massive remote sensing data effectively. We design a hierarchical multi-dimensional hybrid indexing model (HMDH), to address the problems in underlying organization and management, and improve query efficiency. Firstly, we establish remote sensing data grid as the smallest unit carrying and processing spatio-temporal information. We implement the construction of the HMDH in two steps, data classification based on fuzzy clustering algorithm, and classification optimization based on recursive neighborhood search algorithm. Then, we construct a hierarchical “cube” structure, filled with continuous space filling curves, to complete the coding of the HMDH. The HMDH reduces the amount of data to 6–17% and improves the accuracy to more than eight times than traditional grid model. Moreover, it can reduce the query time to 25% in some query scenarios than algorithms selected as the baseline in this paper. The HMDH model proposed can be used to solve the efficiency problems of fast and joint retrieval of remote sensing data. It extends the pattens of data sharing service and has a high application value.

Description: The chemical composition dataset of Aerosol Reanalysis of NASA’s Modern-Era Retrospective Analysis for Research and Application, version 2 (MERRAero) has not been thoroughly evaluated with observation data in mainland China due to the lack of long-term chemical components data. Using the 5-year data of PM10 mass concentrations and chemical compositions obtained from the routine sampling measurements at the World Meteorological Organization the Global Atmosphere Watch Programme regional background stations, Jing Sha (JS) and Lin’An (LA), in central and eastern China, we comprehensively evaluate the surface PM10 concentrations and chemical compositions such as sulfate (SO42−), organic carbon (OC) and black carbon (BC) derived from MERRAero. Overall, the concentrations of PM10, SO42−, OC and BC from the MERRAero agreed well with the measurements, despite a slight and consistent overestimation of BC concentrations and a moderate and persistent underestimation of PM10 concentrations throughout the study period. The MERRAero reanalysis of aerosol compositions performs better during the summertime than wintertime. By considering the nitrate particles in PM10 reconstruction, MERRAero performance can be significantly improved. The unreasonable seasonal variations of PM10 chemical compositions at station LA by MERRAero could be causative factors for the larger MERRAero discrepancies during 2016–2017 than the period of 2011–2013.

Description: To seek stochastic analogies in key processes related to the hydrological cycle, an extended collection of several billions of records from hundred thousands of worldwide stations is used in this work. The examined processes are the near-surface hourly temperature, dew point, relative humidity, sea level pressure, and atmospheric wind speed, as well as the hourly/daily streamflow and precipitation. Through the use of robust stochastic metrics such as the K-moments and a second-order climacogram (i.e., variance of the averaged process vs. scale), it is found that several stochastic similarities exist in both the marginal structure, in terms of the first four moments, and in the second-order dependence structure. Stochastic similarities are also detected among the examined processes, forming a specific hierarchy among their marginal and dependence structures, similar to the one in the hydrological cycle. Finally, similarities are also traced to the isotropic and nearly Gaussian turbulence, as analyzed through extensive lab recordings of grid turbulence and of turbulent buoyant jet along the axis, which resembles the turbulent shear and buoyant regime that dominates and drives the hydrological-cycle processes in the boundary layer. The results are found to be consistent with other studies in literature such as solar radiation, ocean waves, and evaporation, and they can be also justified by the principle of maximum entropy. Therefore, they allow for the development of a universal stochastic view of the hydrological-cycle under the Hurst–Kolmogorov dynamics, with marginal structures extending from nearly Gaussian to Pareto-type tail behavior, and with dependence structures exhibiting roughness (fractal) behavior at small scales, long-term persistence at large scales, and a transient behavior at intermediate scales.

Description: Changes in the land use/cover alter the Earth system processes and affect the provision of ecosystem services, posing a challenge to achieve sustainable development. In the past few decades, the Yellow River (YR) basin faced enormous social and environmental sustainability challenges associated with environmental degradation, soil erosion, vegetation restoration, and economic development, which makes it important to understand the long-term land use/cover dynamics of this region. Here, using three decades of Landsat imagery (17,080 images) and incorporating physiography data, we developed an effective annual land use/cover mapping framework and provided a set of 90 m resolution continuous annual land use/cover maps of the YR basin from 1986 to 2018 based on the Google Earth Engine and the Classification and Regression Trees algorithm. The independent random sampling validations based on the field surveys (640 points) and Google Earth (3456 points) indicated that the overall accuracy of these maps is 78.3% and 80.0%, respectively. The analysis of the land system of the YR basin showed that this region presents complex temporal and spatial changes, and the main change patterns include no change or little change, cropland loss and urban expansion, grassland restoration, increase in orchard and terrace, and increase in forest during the entire study period. The major land use/cover change has occurred in the transitions from forests, grasslands, and croplands to the class of orchard and terrace (19.8% of all change area), which not only increase the greenness but also raised the income, suggesting that YR progress towards sustainable development goals for livelihood security, economic growth, and ecological protection. Based on these data and analysis, we can further understand the role of the land system in the mutual feedback between society and the environment, and provide support for ecological conservation, high-quality development, and the formulation of sustainable management policies in this basin, highlighting the importance of continuous land use/cover information for understanding the interactions between the human and natural systems.

Description: Image matching is one of the most important tasks in Unmanned Arial Vehicles (UAV) photogrammetry applications. The number and distribution of extracted keypoints play an essential role in the reliability and accuracy of image matching and orientation results. Conventional detectors generally produce too many redundant keypoints. In this paper, we study the effect of applying various information content criteria to keypoint selection tasks. For this reason, the quality measures of entropy, spatial saliency and texture coefficient are used to select keypoints extracted using SIFT, SURF, MSER and BRISK operators. Experiments are conducted using several synthetic and real UAV image pairs. Results show that the keypoint selection methods perform differently based on the applied detector and scene type, but in most cases, the precision of the matching results is improved by an average of 15%. In general, it can be said that applying proper keypoint selection techniques can improve the accuracy and efficiency of UAV image matching and orientation results. In addition to the evaluation, a new hybrid keypoint selection is proposed that combines all of the information content criteria discussed in this paper. This new screening method was also compared with those of SIFT, which showed 22% to 40% improvement for the bundle adjustment of UAV images.

Description: The safety of the gas transmission infrastructure is one of the main concerns for infrastructure operating companies. Common gas pipelines’ tightness control is tedious and time-consuming. The development of new methods is highly desirable. This paper focuses on the applications of air-borne methods for inspections of the natural gas pipelines. The main goal of this study is to test an unmanned aerial vehicle (UAV), equipped with a remote sensing methane detector, for natural gas leak detection from the pipeline network. Many studies of the use of the UAV with laser detectors have been presented in the literature. These studies include experiments mainly on the artificial methane sources simulating gas leaks. This study concerns the experiments on a real leakage of natural gas from a pipeline. The vehicle at first monitored the artificial source of methane to determine conditions for further experiments. Then the experiments on the selected section of the natural gas pipelines were conducted. The measurement data, along with spatial coordinates, were collected and analyzed using machine learning methods. The analysis enabled the identification of groups of spatially correlated regions which have increased methane concentrations. Investigations on the flight altitude influence on the accuracy of measurements were also carried out. A range of between 4 m and 15 m was depicted as optimal for data collection in the natural gas pipeline inspections. However, the results from the field experiments showed that areas with increased methane concentrations are significantly more difficult to identify, though they are still noticeable. The experiments also indicate that the lower altitudes of the UAV flights should be chosen. The results showed that UAV monitoring can be used as a tool for the preliminary selection of potentially untight gas pipeline sections.

Description: We manually mapped particles ranging in longest axis from 0.3 cm to 95 m on (101955) Bennu for the Origins, Spectral Interpretation, Resource Identification, and Security–Regolith Explorer (OSIRIS-REx) asteroid sample return mission. This enabled the mission to identify candidate sample collection sites and shed light on the processes that have shaped the surface of this rubble-pile asteroid. Building on a global survey of particles, we used higher-resolution data from regional observations to calculate particle size-frequency distributions (PSFDs) and assess the viability of four candidate sites for sample collection (presence of unobstructed particles ≤ 2 cm). The four candidate sites have common characteristics: each is situated within a crater with a relative abundance of sampleable material. Their PSFDs, however, indicate that each site has experienced different geologic processing. The PSFD power-law slopes range from −3.0 ± 0.2 to −2.3 ± 0.1 across the four sites, based on images with a 0.01-m pixel scale. These values are consistent with, or shallower than, the global survey measurements. At one site, Osprey, the particle packing density appears to reach geometric saturation. We evaluate the uncertainty in these measurements and discuss their implications for other remotely sensed and mapped particles, and their importance to OSIRIS-REx sampling operations.

Description: Satellite video single object tracking has attracted wide attention. The development of remote sensing platforms for earth observation technologies makes it increasingly convenient to acquire high-resolution satellite videos, which greatly accelerates ground target tracking. However, overlarge images with small object size, high similarity among multiple moving targets, and poor distinguishability between the objects and the background make this task most challenging. To solve these problems, a deep Siamese network (DSN) incorporating an interframe difference centroid inertia motion (ID-CIM) model is proposed in this paper. In object tracking tasks, the DSN inherently includes a template branch and a search branch; it extracts the features from these two branches and employs a Siamese region proposal network to obtain the position of the target in the search branch. The ID-CIM mechanism was proposed to alleviate model drift. These two modules build the ID-DSN framework and mutually reinforce the final tracking results. In addition, we also adopted existing object detection datasets for remotely sensed images to generate training datasets suitable for satellite video single object tracking. Ablation experiments were performed on six high-resolution satellite videos acquired from the International Space Station and “Jilin-1” satellites. We compared the proposed ID-DSN results with other 11 state-of-the-art trackers, including different networks and backbones. The comparison results show that our ID-DSN obtained a precision criterion of 0.927 and a success criterion of 0.694 with a frames per second (FPS) value of 32.117 implemented on a single NVIDIA GTX1070Ti GPU.

Description: The Qaidam Basin is a unique and complex ecosystem, wherein elevation gradients lead to high spatial heterogeneity in vegetation dynamics and responses to environmental factors. Based on the remote sensing data of Moderate Resolution Imaging Spectroradiometer (MODIS), Tropical Rainfall Measuring Mission (TRMM) and Global Land Data Assimilation System (GLDAS), we analyzed the spatiotemporal variations of vegetation dynamics and responses to precipitation, accumulative temperature (AT) and soil moisture (SM) in the Qaidam Basin from 2001 to 2016. Moreover, the contribution of those factors to vegetation dynamics at different altitudes was analyzed via an artificial neural network (ANN) model. The results indicated that the Normalized Difference Vegetation Index (NDVI) values in the growing season showed an overall upward trend, with an increased rate of 0.001/year. The values of NDVI in low-altitude areas were higher than that in high-altitude areas, and the peak values of NDVI appeared along the elevation gradient at 4400–4600 m. Thanks to the use of ANN, we were able to detect the relative contribution of various environmental factors; the relative contribution rate of AT to the NDVI dynamic was the most significant (35.17%) in the low-elevation region (

Description: The Mediterranean Ridge accretionary complex (MAC) is a product of the convergence of Africa–Europe–Aegean plates. As a result, the region exhibits a continuous mass change (horizontal/vertical movements) that generates earthquakes. Over the last 50 years, approximately 430 earthquakes with M ≥ 5, including 36 M ≥ 6 earthquakes, have been recorded in the region. This study aims to link the ocean bottom deformations manifested through ocean bottom pressure variations with the earthquakes’ time series. To this end, we investigated the time series of the ocean bottom pressure (OBP) anomalies derived from the Gravity Recovery and Climate Experiment (GRACE) and GRACE Follow-On (GRACE-FO) satellite missions. The OBP time series comprises a decreasing trend in addition to 1.02, 1.52, 4.27, and 10.66-year periodic components, which can be explained by atmosphere, oceans, and hydrosphere (AOH) processes, the Earth’s pole movement, solar activity, and core–mantle coupling. It can be inferred from the results that the OBP anomalies time series/mass change is linked to a rising trend and periods in the earthquakes’ energy time series. Based on this preliminary work, ocean-bottom pressure variation appears to be a promising lead for further research.

Description: Large-scale ecosystem restoration projects (ERPs) have been implemented since the beginning of the new millennium to restore vegetation and improve the ecosystem in Southwest China. However, quantifying the effects of specific restoration activities, such as afforestation and grass planting, on vegetation recovery is difficult due to their incommensurable spatiotemporal distribution. Long-term and successive ERP-driven land use/cover changes (LUCCs) were used to recognise the spatiotemporal patterns of major restoration activities, and a contribution index was defined to assess the effects of these activities on gross primary production (GPP) dynamics in Southwest China during the period of 2001–2015. The results were as follows. (1) Afforestation and grass planting were major restoration activities that accounted for more than 54% of all LUCCs in Southwest China. Approximately 96% of restoration activities involved afforestation, and these activities were mostly distributed around Yunnan Province. (2) The Breathing Earth System Simulator (BESS) GPP performed better than the Moderate Resolution Imaging Spectroradiometer (MODIS) GPP validated by field observation data. Nevertheless, their annual GPP trends were similar and increased by 12,581 g C m−2 d−1 and 13,406 g C m−2 d−1 for MODIS and BESS GPPs, respectively. (3) Although the afforestation and grass planting areas accounted for less than 1% of the total area of Southwest China, they contributed to more than 1% of the annual GPP increase in the entire study area. Afforestation directly contributed 14.94% (BESS GPP) or 24.64% (MODIS GPP) to the annual GPP increase. Meanwhile, grass planting directly contributed only 0.41% (BESS GPP) or 0.03% (MODIS GPP) to the annual GPP increase.

Description: Climate change and associated Arctic amplification cause a degradation of permafrost which in turn has major implications for the environment. The potential turnover of frozen ground from a carbon sink to a carbon source, eroding coastlines, landslides, amplified surface deformation and endangerment of human infrastructure are some of the consequences connected with thawing permafrost. Satellite remote sensing is hereby a powerful tool to identify and monitor these features and processes on a spatially explicit, cheap, operational, long-term basis and up to circum-Arctic scale. By filtering after a selection of relevant keywords, a total of 325 articles from 30 international journals published during the last two decades were analyzed based on study location, spatio-temporal resolution of applied remote sensing data, platform, sensor combination and studied environmental focus for a comprehensive overview of past achievements, current efforts, together with future challenges and opportunities. The temporal development of publication frequency, utilized platforms/sensors and the addressed environmental topic is thereby highlighted. The total number of publications more than doubled since 2015. Distinct geographical study hot spots were revealed, while at the same time large portions of the continuous permafrost zone are still only sparsely covered by satellite remote sensing investigations. Moreover, studies related to Arctic greenhouse gas emissions in the context of permafrost degradation appear heavily underrepresented. New tools (e.g., Google Earth Engine (GEE)), methodologies (e.g., deep learning or data fusion etc.) and satellite data (e.g., the Methane Remote Sensing LiDAR Mission (Merlin) and the Sentinel-fleet) will thereby enable future studies to further investigate the distribution of permafrost, its thermal state and its implications on the environment such as thermokarst features and greenhouse gas emission rates on increasingly larger spatial and temporal scales.

Description: A glacier surge, which is quasi-periodic and involves rapid flow, is an abnormal glacier motion. Although some glaciers have been found to be surging, little is known about surging glaciers on the Tibetan Plateau (TP), especially the Central and Northern TP. Here, we found a surging glacier (GLIMS ID: G085885E34389N) on the Zangser Kangri ice field (ZK), Central TP, by means of the digital elevation models (DEMs) from the Shuttle Radar Topography Mission (SRTM), TanDEM-X 90 m, Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) DEMs, and High Mountain Asia 8-m DEM (HMA), combined with Landsat images and the Global Land Ice Velocity Extraction from Landsat 8 (GoLIVE) dataset. This surge event was confirmed by the crevasses, shear margin, and visible advancing snout shown in the Landsat images produced since 2014 and the HMA. The inter-comparison of these DEMs and the surface velocity changes showed that the surge event started between October 2012 and January 2014. The glacier may have also surged in the 1970s, based on a comparison between the topographical map and Landsat images. The glacier mass balance here has been slightly positive from 1999 onward (+0.03 ± 0.06 m w.e.a−1 from 1999 to 2015, +0.02 ± 0.07 m w.e.a−1 from 1999 to December 2011), which may indicate that the ZK is located on the southern edge of the mass balance anomaly on the TP. Combining with other surging glaciers on the Central and Northern TP, the relatively balanced mass condition, large size, and shallow slope can be associated with glacier surges on the Central and Northern TP.

Description: Remote sensing for precision agriculture has been strongly fostered by the launches of the European Space Agency Sentinel-2 optical imaging constellation, enabling both academic and private services for redirecting farmers towards a more productive and sustainable management of the agroecosystems. As well as the freely and open access policy adopted by the European Space Agency (ESA), software and tools are also available for data processing and deeper analysis. Nowadays, a bottleneck in this valuable chain is represented by the difficulty in shadow identification of Sentinel-2 data that, for precision agriculture applications, results in a tedious problem. To overcome the issue, we present a simplified tool, AgroShadow, to gain full advantage from Sentinel-2 products and solve the trade-off between omission errors of Sen2Cor (the algorithm used by the ESA) and commission errors of MAJA (the algorithm used by Centre National d’Etudes Spatiales/Deutsches Zentrum für Luft- und Raumfahrt, CNES/DLR). AgroShadow was tested and compared against Sen2Cor and MAJA in 33 Sentinel 2A-B scenes, covering the whole of 2020 and in 18 different scenarios of the whole Italian country at farming scale. AgroShadow returned the lowest error and the highest accuracy and F-score, while precision, recall, specificity, and false positive rates were always similar to the best scores which alternately were returned by Sen2Cor or MAJA.

Description: Very Long Baseline Interferometry (VLBI) solution can yield accurate information of angular position, and has been successfully used in the field of deep space exploration, such as astrophysics, imaging, detector positioning, and so on. The increase in VLBI data volume puts higher demands on efficient processing. Essentially, the main step of VLBI is the correlation processing, through which the angular position can be calculated. Since the VLBI correlation processing is both computation-intensive and data-intensive, the CPU cluster is usually employed in practical application to perform complex distributed computation. In this paper, we propose a parallel implementation of VLBI correlator based on graphics processing unit (GPU) to realize a more efficient and economical angular position calculation of deep space target. On the basis of massively GPU parallel computing, the coalesced access strategy and the parallel pipeline strategy are introduced to further accelerate the VLBI correlator. Experimental results show that the optimized GPU-based VLBI method can meet the real-time processing requirements of the received data stream. Compared with the sequential method, the proposed approach can reach a 224.1 × calculation speedup, and a 36.8 × application speedup. Compared with the multi-CPUs method, it can achieve 28.6 × calculation speedup and 4.7 × application speedup.

Description: Complex terrain features—in particular, environmental conditions, high population density and potential socio-economic damage—make the Trans-Mexican Volcanic Belt (TMVB) of particular interest regarding the study of deep convection and related severe weather. In this research, 10 years of Moderate-Resolution Imaging Spectroradiometer (MODIS) cloud observations are combined with Climate Hazards Group Infrared Precipitation with Station (CHIRPS) rainfall data to characterize the spatio-temporal distribution of deep convective clouds (DCCs) and their relationship to extreme precipitation. From monthly distributions, wet and dry phases are identified for cloud fraction, deep convective cloud frequency and convective precipitation. For both DCC and extreme precipitation events, the highest frequencies align just over the higher elevations of the TMVB. A clear relationship between DCCs and terrain features, indicating the important role of orography in the development of convective systems, is noticed. For three sub-regions, the observed distributions of deep convective cloud and extreme precipitation events are assessed in more detail. Each sub-region exhibits different local conditions, including terrain features, and are known to be influenced differently by emerging moisture fluxes from the Gulf of Mexico and the Pacific Ocean. The observed distinct spatio-temporal variabilities provide the first insights into the physical processes that control the convective development in the study area. A signal of the midsummer drought in Mexico (i.e., “canícula”) is recognized using MODIS monthly mean cloud observations.

Description: Precision agriculture relies on the rapid acquisition and analysis of agricultural information. An emerging method of agricultural monitoring is unmanned aerial vehicle low-altitude remote sensing (UAV-LARS), which possesses significant advantages of simple construction, strong mobility, and high spatial-temporal resolution with synchronously obtained image and spatial information. UAV-LARS could provide a high degree of overlap between X and Y during key crop growth periods that is currently lacking in satellite and remote sensing data. Simultaneously, UAV-LARS overcomes the limitations such as small scope of ground platform monitoring. Overall, UAV-LARS has demonstrated great potential as a tool for monitoring agriculture at fine- and regional-scales. Here, we systematically summarize the history and current application of UAV-LARS in Chinese agriculture. Specifically, we outline the technical characteristics and sensor payload of the available types of unmanned aerial vehicles and discuss their advantages and limitations. Finally, we provide suggestions for overcoming current limitations of UAV-LARS and directions for future work.

Description: Currently available high-resolution digital elevation model (DEM) is not particularly useful to geologists for understanding the long-term changes in fluvial landforms induced by tectonic uplift, although DEMs that are generated from satellite stereo images such as the ZiYuan-3 (ZY3) satellite include characteristics with significant coverage and rapid acquisition. Since an ongoing analysis of fluvial systems is lacking, the ZY3 DEM was generated from block adjustment to describe the mountainous area of the Qianhe Basin that have been induced by tectonic uplift. Moreover, we evaluated the overall elevation difference in ZY3 DEM, Shuttle Radar Topography Mission (1″ × 1″) (SRTM1), and Reflection Radiometer Global Digital Elevation Model (ASTER GDEM) by using the Ice Cloud and Land Elevation Satellite/Geoscience Laser Altimeter (ICESat/GLAH14) point cloud and a DEM of 1:50,000 scale. The values of the root mean square error (RMSE) of the elevation difference for ZY3 DEM were 9.31 and 9.71 m, respectively, and are in good agreement with SRTM1. The river long profiles and terrace heights were also extracted to compare the differences in channel steepness and the incision rates with SRTM1 and ASTER GDEM. Our results prove that ZY3 DEM would be a good alternative to SRTM1 in achieving the 1:50,000 scale for DEM products in China, while ASTER GDEM is unsuitable for extracting river longitudinal profiles. In addition, the northern and southern river incision rates were estimated using the ages and heights of river terraces, demonstrating a range from 0.12–0.45 to 0.10–0.33 m/kyr, respectively. Collectively, these findings suggest that ZY3 DEM is capable of estimating tectonic geomorphological features and has the potential for analyzing the continuous evolutionary response of a landscape to changes in climate and tectonics.

Description: A micro-Doppler signature (m-DS) based on the rotation of drone blades is an effective way to detect and identify small drones. Deep-learning-based recognition algorithms can achieve higher recognition performance, but they needs a large amount of sample data to train models. In addition to the hovering state, the signal samples of small unmanned aerial vehicles (UAVs) should also include flight dynamics, such as vertical, pitch, forward and backward, roll, lateral, and yaw. However, it is difficult to collect all dynamic UAV signal samples under actual flight conditions, and these dynamic flight characteristics will lead to the deviation of the original features, thus affecting the performance of the recognizer. In this paper, we propose a small UAV m-DS recognition algorithm based on dynamic feature enhancement. We extract the combined principal component analysis and discrete wavelet transform (PCA-DWT) time–frequency characteristics and texture features of the UAV’s micro-Doppler signal and use a dynamic attribute-guided augmentation (DAGA) algorithm to expand the feature domain for model training to achieve an adaptive, accurate, and efficient multiclass recognition model in complex environments. After the training model is stable, the average recognition accuracy rate can reach 98% during dynamic flight.

Description: Hydrological connectivity is an important characteristic of wetlands that maintains the stability and functions of an ecosystem. This study investigates the temporal variations of hydrological connectivity and their driving mechanism in Baiyangdian Lake, a large shallow wetland in North China, using a time series of open water surface area data derived from 36 Landsat 8 multispectral images from 2013–2019 and in situ measured water level data. Water area classification was implemented using the Google Earth Engine. Six commonly used indexes for extracting water surface data from satellite images were compared and the best performing index was selected for the water classification. A composite hydrological connectivity index computed from open water area data derived from Landsat 8 images was developed based on several landscape pattern indices and applied to Baiyangdian Lake. The results show that, reflectance in the near-infrared band is the most accurate index for water classification with 〉98% overall accuracy because of its sensitivity to different land cover types. The slopes of the best-fit linear relationships between the computed hydrological connectivity and observed water level show high variability between years. In most years, hydrological connectivity generally increases when water levels increase, with an average R2 of 0.88. The spatial distribution of emergent plants also varies year to year owing to interannual variations of the climate and hydrological regime. This presents a possible explanation for the variations in the annual relationship between hydrological connectivity and water level. For a given water level, the hydrological connectivity is generally higher in spring than summer and autumn. This can be explained by the fact that the drag force exerted by emergent plants, which reduces water flow, is smaller than that for summer and autumn owing to seasonal variations in the phenological characteristics of emergent plants. Our study reveals that both interannual and seasonal variations in the hydrological connectivity of Baiyangdian Lake are related to the growth of emergent plants, which occupy a large portion of the lake area. Proper vegetation management may therefore improve hydrological connectivity in this wetland.

Description: The belowground root zone of influence (ZOI) is fundamental to the study of the root–root and root–soil interaction mechanisms of plants and is vital for understanding changes in plant community compositions and ecosystem processes. However, traditional root research methods have a limited capacity to measure the actual ZOIs within plant communities without destroying them in the process. This study has developed a new approach to determining the ZOIs within natural plant communities. First, ground-penetrating radar (GPR), a non-invasive near-surface geophysical tool, was used to obtain a dataset of the actual spatial distribution of the coarse root system in a shrub quadrat. Second, the root dataset was automatically clustered and analyzed using the hierarchical density-based spatial clustering of applications with noise (HDBSCAN) algorithm to determine the ZOIs of different plants. Finally, the shape, size, and other characteristics of each ZOI were extracted based on the clustering results. The proposed method was validated using GPR-obtained root data collected in two field shrub plots and one simulation on a dataset from existing literature. The results show that the shrubs within the studied community exhibited either segregated and aggregated ZOIs, and the two types of ZOIs were distinctly in terms of shape and size, demonstrating the complexity of root growth in response to changes in the surrounding environment. The ZOIs extracted based on GPR survey data were highly consistent with the actual growth pattern of shrub roots and can thus be used to reveal the spatial competition strategies of plant roots responding to changes in the soil environment and the influence of neighboring plants.

Description: As a popular research direction in the field of intelligent transportation, road detection has been extensively concerned by many researchers. However, there are still some key issues in specific applications that need to be further improved, such as the feature processing of road images, the optimal choice of information extraction and detection methods, and the inevitable limitations of detection schemes. In the existing research work, most of the image segmentation algorithms applied to road detection are sensitive to noise data and are prone to generate redundant information or over-segmentation, which makes the computation of segmentation process more complicated. In addition, the algorithm needs to overcome objective factors such as different road conditions and natural environments to ensure certain execution efficiency and segmentation accuracy. In order to improve these issues, we integrate the idea of shallow machine-learning model that clusters first and then classifies in this paper, and a hierarchical multifeature road image segmentation integration framework is proposed. The proposed model has been tested and evaluated on two sets of road datasets based on real scenes and compared with common detection methods, and its effectiveness and accuracy have been verified. Moreover, it demonstrates that the method opens up a new way to enhance the learning and detection capabilities of the model. Most importantly, it has certain potential for application in various practical fields such as intelligent transportation or assisted driving.

Description: In this paper, we propose a new discriminative dictionary learning method based on Riemann geometric perception for polarimetric synthetic aperture radar (PolSAR) image classification. We made an optimization model for geometry-aware discrimination dictionary learning in which the dictionary learning (GADDL) is generalized from Euclidian space to Riemannian manifolds, and dictionary atoms are composed of manifold data. An efficient optimization algorithm based on an alternating direction multiplier method was developed to solve the model. Experiments were implemented on three public datasets: Flevoland-1989, San Francisco and Flevoland-1991. The experimental results show that the proposed method learned a discriminative dictionary with accuracies better those of comparative methods. The convergence of the model and the robustness of the initial dictionary were also verified through experiments.

Description: Vegetation has been effectively monitored using remote sensing time-series vegetation index (VI) data for several decades. Drought monitoring has been a common application with algorithms tuned to capturing anomalous temporal and spatial vegetation patterns. Drought stress models, such as the Vegetation Drought Response Index (VegDRI), often use VIs like the Normalized Difference Vegetation Index (NDVI). The EROS expedited Moderate Resolution Imaging Spectroradiometer (eMODIS)-based, 7-day NDVI composites are integral to the VegDRI. As MODIS satellite platforms (Terra and Aqua) approach mission end, the Visible Infrared Imaging Radiometer Suite (VIIRS) presents an alternate NDVI source, with daily collection, similar band passes, and moderate spatial resolution. This study provides a statistical comparison between EROS expedited VIIRS (eVIIRS) 375-m and eMODIS 250-m and tests the suitability of replacing MODIS NDVI with VIIRS NDVI for drought monitoring and vegetation anomaly detection. For continuity with MODIS NDVI, we calculated a geometric mean regression adjustment algorithm using 375-m resolution for an eMODIS-like NDVI (eVIIRS’) eVIIRS’ = 0.9887 × eVIIRS − 0.0398. The resulting statistical comparisons (eVIIRS’ vs. eMODIS NDVI) showed correlations consistently greater than 0.84 throughout the three years studied. The eVIIRS’ VegDRI results characterized similar drought patterns and hotspots to the eMODIS-based VegDRI, with near zero bias.

Description: In recent years, many agriculture-related problems have been evaluated with the integration of artificial intelligence techniques and remote sensing systems. The rapid and accurate identification of apple targets in an illuminated and unstructured natural orchard is still a key challenge for the picking robot’s vision system. In this paper, by combining local image features and color information, we propose a pixel patch segmentation method based on gray-centered red–green–blue (RGB) color space to address this issue. Different from the existing methods, this method presents a novel color feature selection method that accounts for the influence of illumination and shadow in apple images. By exploring both color features and local variation in apple images, the proposed method could effectively distinguish the apple fruit pixels from other pixels. Compared with the classical segmentation methods and conventional clustering algorithms as well as the popular deep-learning segmentation algorithms, the proposed method can segment apple images more accurately and effectively. The proposed method was tested on 180 apple images. It offered an average accuracy rate of 99.26%, recall rate of 98.69%, false positive rate of 0.06%, and false negative rate of 1.44%. Experimental results demonstrate the outstanding performance of the proposed method.

Description: The incorporation of advanced technologies into Unmanned Aerial Vehicles (UAVs) platforms have enabled many practical applications in Precision Agriculture (PA) over the past decade. These PA tools offer capabilities that increase agricultural productivity and inputs’ efficiency and minimize operational costs simultaneously. However, these platforms also have some constraints that limit the application of UAVs in agricultural operations. The constraints include limitations in providing imagery of adequate spatial and temporal resolutions, dependency on weather conditions, and geometric and radiometric correction requirements. In this paper, a practical guide on technical characterizations of common types of UAVs used in PA is presented. This paper helps select the most suitable UAVs and on-board sensors for different agricultural operations by considering all the possible constraints. Over a hundred research studies were reviewed on UAVs applications in PA and practical challenges in monitoring and mapping field crops. We concluded by providing suggestions and future directions to overcome challenges in optimizing operational proficiency.

Description: This study evaluated the performance of the early, late and final runs of IMERG version 06 precipitation products at various spatial and temporal scales in China from 2008 to 2017, against observations from 696 rain gauges. The results suggest that the three IMERG products can well reproduce the spatial patterns of precipitation, but exhibit a gradual decrease in the accuracy from the southeast to the northwest of China. Overall, the three runs show better performances in the eastern humid basins than the western arid basins. Compared to the early and late runs, the final run shows an improvement in the performance of precipitation estimation in terms of correlation coefficient, Kling–Gupta Efficiency and root mean square error at both daily and monthly scales. The three runs show similar daily precipitation detection capability over China. The biases of the three runs show a significantly positive (p 〈 0.01) correlation with elevation, with higher accuracy observed with an increase in elevation. However, the categorical metrics exhibit low levels of dependency on elevation, except for the probability of detection. Over China and major river basins, the three products underestimate the frequency of no/tiny rain events (P 〈 0.1 mm/day) but overestimate the frequency of light rain events (0.1 ≤ P 〈 10 mm/day). The three products converge with ground-based observation with regard to the frequency of rainstorm (P ≥ 50 mm/day) in the southern part of China. The revealed uncertainties associated with the IMERG products suggests that sustaining efforts are needed to improve their retrieval algorithms in the future.

Description: In the Qihe area, the magnetic anomalies caused by deep and concealed magnetite are weak and compared with ground surveys, airborne surveys further weaken the signals. Moreover, the magnetite in the Qihe area belongs to a contact-metasomatic deposit, and the magnetic anomalies caused by the magnetite and its mother rock overlap and interweave. Therefore, it is difficult to directly delineate the target areas of magnetite according to the measured aeromagnetic maps in Qihe or similar areas, let alone estimate prospective magnetite resources. This study tried to extract magnetite-caused anomalies from aeromagnetic data by using high-pass filtering. Then, a preliminary estimation of magnetite prospective resources was realized by the 3D inversion of the extracted anomalies. In order to improve the resolution and accuracy of the inversion results, a combined model-weighting function was proposed for the inversion. Meanwhile, the upper and lower bounds and positive and negative constraints were imposed on the model parameters to further improve the rationality of the inversion results. A theoretical model with deep and concealed magnetite was established. It demonstrated the feasibility of magnetite-caused anomaly extraction and magnetite prospective resource estimation. Finally, the magnetite-caused anomalies were extracted from the measured aeromagnetic data and were consistent with known drilling information. The distribution of underground magnetic bodies was obtained by the 3D inversion of extracted anomalies, and the existing drilling data were used to delineate the volume of magnetite. In this way, the prospective resources of magnetite in Qihe area were estimated.

Description: Land use/land cover (LULC) change has been recognized as one of the most important indicators to study ecological and environmental changes. Remote sensing provides an effective way to map and monitor LULC change in real time and for large areas. However, with the increasing spatial resolution of remote sensing imagery, traditional classification approaches cannot fully represent the spectral and spatial information from objects and thus have limitations in classification results, such as the “salt and pepper” effect. Nowadays, the deep semantic segmentation methods have shown great potential to solve this challenge. In this study, we developed an adaptive band attention (BA) deep learning model based on U-Net to classify the LULC in the Three Gorges Reservoir Area (TGRA) combining RapidEye imagery and topographic information. The BA module adaptively weighted input bands in convolution layers to address the different importance of the bands. By comparing the performance of our model with two typical traditional pixel-based methods including classification and regression tree (CART) and random forest (RF), we found a higher overall accuracy (OA) and a higher Intersection over Union (IoU) for all classification categories using our model. The OA and mean IoU of our model were 0.77 and 0.60, respectively, with the BA module and were 0.75 and 0.58, respectively, without the BA module. The OA and mean IoU of CART and RF were both below 0.51 and 0.30, respectively, although RF slightly outperformed CART. Our model also showed a reasonable classification accuracy in independent areas well outside the training area, which indicates the strong model generalizability in the spatial domain. This study demonstrates the novelty of our proposed model for large-scale LULC mapping using high-resolution remote sensing data, which well overcomes the limitations of traditional classification approaches and suggests the consideration of band weighting in convolution layers.

Description: Riparian zones play an important role in the ecological stability of rivers. In particular, the quality of the riparian vegetation is a significant component of the hydromorphological status. In Europe, the QBR index (Qualitat del Bosc de Ribera) and the River Habitat Survey (RHS) are commonly used for the qualitative assessment of the riparian vegetation. In this study, we estimated the QBR index and the Riparian Quality index, which is derived from the RHS method, for 123 river reaches of the National Monitoring Network of Greece. Our field work included the completion of RHS and QBR protocols, as well as the use of Unmanned Aerial Vehicles (UAVs). The aim of this study is to assess the riparian vegetation status and to identify linkages with the dominant land uses within the catchment. Correlation analysis was used to identify the relationships between hydromorphological alterations and the degradation of the riparian vegetation, as well as their connection to land uses in the catchment area. Our results highlighted severe modifications of the riparian vegetation for the majority of the studied reaches. We also showed a differentiation of the QBR with respect to changes in the altitude and the land uses in the catchment area. Overall QBR reflects the variation in the riparian vegetation quality better than RQI. Our findings constitute an assessment of the status of the riparian zones in Greek rivers and set the basis for further research for the development of new and effective tools for a rapid quality assessment of the riparian zones.

Description: Streams and rivers of the Luquillo Experimental Forest, Puerto Rico, have been the subject of extensive watershed and aquatic research since the 1980s. This research includes understanding stream export of nutrients and coarse particulate organic matter, physicochemical constituents, aquatic fauna populations and community structure. However, many of the streams and watersheds studied do not appear in standard scale maps. We document recent collaborative and multi-institutional work to improve hydrological network information and identify knowledge gaps. The methods used to delimit and densify stream networks include establishment and incorporation of an updated new vertical datum for Puerto Rico, LIDAR derived elevation, and a combination of visual-manual and automated digitalization processes. The outcomes of this collaborative effort have resulted in improved watershed delineation, densification of hydrologic networks to reflect the scale of on-going studies, and the identification of constraining factors such as unmapped roadways, culverts, and other features of the built environment that interrupt water flow and alter runoff pathways. This work contributes to enhanced knowledge for watershed management, including attributes of riparian areas, effects of road and channel intersections and ridge to reef initiatives with broad application to other watersheds.

Description: Synthetic aperture radar (SAR) systems are susceptible to radio frequency interference (RFI). The existence of RFI will cause serious degradation of SAR image quality and a huge risk of target misjudgment, which makes the research on RFI suppression methods receive widespread attention. Since the location of the RFI source is one of the most vital information for achieving RFI spatial filtering, this paper presents a novel location method of multiple independent RFI sources based on direction-of-arrival (DOA) estimation and the non-convex optimization algorithm. It deploys an L-shaped multi-channel array on the SAR system to receive echo signals, and utilizes the two-dimensional estimating signal parameter via rotational invariance techniques (2D-ESPRIT) algorithm to estimate the positional relationship between the RFI source and the SAR system, ultimately combines the DOA estimation results of multiple azimuth time to calculate the geographic location of RFI sources through the particle swarm optimization (PSO) algorithm. Results on simulation experiments prove the effectiveness of the proposed method.

Description: Water transparency, measured with Secchi disk depth (SDD), is an important parameter for describing the optical properties of a water body. This study evaluates variations of SDD and related impact factors in the Bohai and Yellow Seas (BYS). Based on a new mechanistic model proposed by Lee et al. (2015) applied to MODIS remote sensing reflectance data, climatological SDD variation from 2003 to 2019 was estimated. The annual mean images showed an increasing trend from the coastal zone to the deep ocean. Lower values were found in the Bohai Sea (BHS), while higher values observed in the center of the southern Yellow Sea (SYS). Additionally, the entire sea has shown a decreasing temporal tend, with the variation rate lowest in the BHS at 0.003 m y−1, and highest in the SYS at 0.015 m y−1. However, the weak increasing trend that appeared since 2017 suggests that water quality seems to have improved. Further, it displayed seasonal patterns of low in winter and spring and high in summer and autumn. The empirical orthogonal function (EOF) analysis of SDD variations over the BYS, shows that the first SDD EOF mode is the highest, strongly correlated with total suspended matter. With the high correlation coefficients of chromophoric dissolved organic matter, it illustrates that the SDD variation is mainly dominated by the optical components in the seawater, although correlation with chlorophyll-a is the weakest. The second and third EOF modes show that photosynthetically available radiation, sea surface temperature, sea surface salinity, and wind speed are the main covariates that cause SDD changes. Water transparency evaluation on a long-term scale is essential for water quality monitoring and marine ecosystem protection.

Description: In recent decades, multispectral and hyperspectral remote sensing data provide unprecedented opportunities for the initial stages of mineral exploration and environmental hazard monitoring [...]

Description: Polar Mesospheric Summer Echoes (PMSE) are distinct radar echoes from the Earth’s upper atmosphere between 80 to 90 km altitude that form in layers typically extending only a few km in altitude and often with a wavy structure. The structure is linked to the formation process, which at present is not yet fully understood. Image analysis of PMSE data can help carry out systematic studies to characterize PMSE during different ionospheric and atmospheric conditions. In this paper, we analyze PMSE observations recorded using the European Incoherent SCATter (EISCAT) Very High Frequency (VHF) radar. The collected data comprises of 18 observations from different days. In our analysis, the image data is divided into regions of a fixed size and grouped into three categories: PMSE, ionosphere, and noise. We use statistical features from the image regions and employ Linear Discriminant Analysis (LDA) for classification. Our results suggest that PMSE regions can be distinguished from ionosphere and noise with around 98 percent accuracy.

Description: The collapse of buildings caused by earthquakes can lead to a large loss of life and property. Rapid assessment of building damage with remote sensing image data can support emergency rescues. However, current studies indicate that only a limited sample set can usually be obtained from remote sensing images immediately following an earthquake. Consequently, the difficulty in preparing sufficient training samples constrains the generalization of the model in the identification of earthquake-damaged buildings. To produce a deep learning network model with strong generalization, this study adjusted four Convolutional Neural Network (CNN) models for extracting damaged building information and compared their performance. A sample dataset of damaged buildings was constructed by using multiple disaster images retrieved from the xBD dataset. Using satellite and aerial remote sensing data obtained after the 2008 Wenchuan earthquake, we examined the geographic and data transferability of the deep network model pre-trained on the xBD dataset. The result shows that the network model pre-trained with samples generated from multiple disaster remote sensing images can extract accurately collapsed building information from satellite remote sensing data. Among the adjusted CNN models tested in the study, the adjusted DenseNet121 was the most robust. Transfer learning solved the problem of poor adaptability of the network model to remote sensing images acquired by different platforms and could identify disaster-damaged buildings properly. These results provide a solution to the rapid extraction of earthquake-damaged building information based on a deep learning network model.

Description: Monitoring the dynamics of coastal cliffs is fundamental for the safety of communities, buildings, utilities, and infrastructures located near the coastline. Structure-from-Motion and Multi View Stereo (SfM-MVS) photogrammetry based on Unmanned Aerial Systems (UAS) is a flexible and cost-effective surveying technique for generating a dense 3D point cloud of the whole cliff face (from bottom to top), with high spatial and temporal resolution. In this paper, in order to generate a reproducible, reliable, precise, accurate, and dense point cloud of the cliff face, a comprehensive analysis of the SfM-MVS processing parameters, image redundancy and acquisition geometry was performed. Using two different UAS, a fixed-wing and a multi-rotor, two flight missions were executed with the aim of reconstructing the geometry of an almost vertical cliff located at the central Portuguese coast. The results indicated that optimizing the processing parameters of Agisoft Metashape can improve the 3D accuracy of the point cloud up to 2 cm. Regarding the image acquisition geometry, the high off-nadir (90°) dataset taken by the multi-rotor generated a denser and more accurate point cloud, with lesser data gaps, than that generated by the low off-nadir dataset (3°) taken by the fixed wing. Yet, it was found that reducing properly the high overlap of the image dataset acquired by the multi-rotor drone permits to get an optimal image dataset, allowing to speed up the processing time without compromising the accuracy and density of the generated point cloud. The analysis and results presented in this paper improve the knowledge required for the 3D reconstruction of coastal cliffs by UAS, providing new insights into the technical aspects needed for optimizing the monitoring surveys.

Description: The extraction of automated plant phenomics from digital images has advanced in recent years. However, the accuracy of extracted phenomics, especially for individual plants in a field environment, requires improvement. In this paper, a new and efficient method of extracting individual plant areas and their mean normalized difference vegetation index from high-resolution digital images is proposed. The algorithm was applied on perennial ryegrass row field data multispectral images taken from the top view. First, the center points of individual plants from digital images were located to exclude plant positions without plants. Second, the accurate area of each plant was extracted using its center point and radius. Third, the accurate mean normalized difference vegetation index of each plant was extracted and adjusted for overlapping plants. The correlation between the extracted individual plant phenomics and fresh weight ranged between 0.63 and 0.75 across four time points. The methods proposed are applicable to other crops where individual plant phenotypes are of interest.

Description: The Gravity Recovery and Climate Experiment (GRACE) mission and its Follow-On (GRACE-FO) mission provide unprecedented observations of terrestrial water storage (TWS) dynamics at basin to continental scales. Established GRACE data assimilation techniques directly adjust the simulated water storage components to improve the estimation of groundwater, streamflow, and snow water equivalent. Such techniques artificially add/subtract water to/from prognostic variables, thus upsetting the simulated water balance. To overcome this limitation, we propose and test an alternative assimilation scheme in which precipitation fluxes are adjusted to achieve the desired changes in simulated TWS. Using a synthetic data assimilation experiment, we show that the scheme improves performance skill in precipitation estimates in general, but that it is more robust for snowfall than for rainfall, and it fails in certain regions with strong horizontal gradients in precipitation. The results demonstrate that assimilation of TWS observations can help correct (adjust) the model’s precipitation forcing and, in turn, enhance model estimates of TWS, snow mass, soil moisture, runoff, and evaporation. A key limitation of the approach is the assumption that all errors in TWS originate from errors in precipitation. Nevertheless, the proposed approach produces more consistent improvements in simulated runoff than the established GRACE data assimilation techniques.

Description: The role of remote sensing data in detecting, estimating, and monitoring socioeconomic status (SES) such as quality of life dimensions and sustainable development prospects has received increased attention. Geospatial data has emerged as powerful source of information for enabling both socio-technical assessment and socio-legal analysis in land administration domain. In the context of Korean (re-)unification, there is a notable paucity of evidence how to identify unknowns in North Korea. The main challenge is the lack of complete and adequate information when it comes to clarifying unknown land tenure relations and land governance arrangements. Deriving informative land tenure relations from geospatial data in line with socio-economic land attributes is currently the most innovative approach. In-close and in-depth investigations of validating the suitability of a set of geospatially informed proxies combining multiple values were taken into consideration, as were the forms of knowledge co-production. Thus, the primary aim is to provide empirical evidence of whether proposed proxies are scientifically valid, policy-relevant, and socially robust. We revealed differences in the distributions of agreements relating to land ownership and land transfer rights identification among scientists, bureaucrats, and stakeholders. Moreover, we were able to measure intrinsic, contextual, representational, and accessibility attributes of information quality regarding the associations between earth observation (EO) data and land tenure relations in North Korea from a number of different viewpoints. This paper offers valuable insights into new techniques for validating suitability of EO data proxies in the land administration domain off the reliance on conventional practices formed and customized to the specific artefacts and guidelines of the remote sensing community.

Description: Remotely sensed land surface temperature (LST) distribution has played a valuable role in land surface processes studies from local to global scales. However, it is still difficult to acquire concurrently high spatiotemporal resolution LST data due to the trade-off between spatial and temporal resolutions in thermal remote sensing. To address this problem, various methods have been proposed to enhance the resolutions of LST data, and substantial progress in this field has been achieved in recent years. Therefore, this study reviewed the current status of resolution enhancement methods for LST data. First, three groups of enhancement methods—spatial resolution enhancement, temporal resolution enhancement, and simultaneous spatiotemporal resolution enhancement—were comprehensively investigated and analyzed. Then, the quality assessment strategies for LST resolution enhancement methods and their advantages and disadvantages were specifically discussed. Finally, key directions for future studies in this field were suggested, i.e., synergy between process-driven and data-driven methods, cross-comparison among different methods, and improvement in localization strategy.

Description: Accurate irrigated area maps remain difficult to generate, as smallholder irrigation schemes often escape detection. Efforts to map smallholder irrigation have often relied on complex classification models fitted to temporal image stacks. The use of high-dimensional geometric median composites (geomedians) and high-dimensional statistics of time-series may simplify classification models and enhance accuracy. High-dimensional statistics for temporal variation, such as the spectral median absolute deviation, indicate spectral variability within a period contributing to a geomedian. The Ord River Irrigation Area was used to validate Digital Earth Australia’s annual geomedian and temporal variation products. Geomedian composites and the spectral median absolute deviation were then calculated on Sentinel-2 images for three smallholder irrigation schemes in Matabeleland, Zimbabwe, none of which were classified as areas equipped for irrigation in AQUASTAT’s Global Map of Irrigated Areas. Supervised random forest classification was applied to all sites. For the three Matabeleland sites, the average Kappa coefficient was 0.87 and overall accuracy was 95.9% on validation data. This compared with 0.12 and 77.2%, respectively, for the Food and Agriculture Organisation’s Water Productivity through Open access of Remotely sensed derived data (WaPOR) land use classification map. The spectral median absolute deviation was ranked among the most important variables across all models based on mean decrease in accuracy. Change detection capacity also means the spectral median absolute deviation has some advantages for cropland mapping over indices such as the Normalized Difference Vegetation Index. The method demonstrated shows potential to be deployed across countries and regions where smallholder irrigation schemes account for large proportions of irrigated area.

Description: The exponential growth in the volume of Earth observation data and the increasing quality and availability of high-resolution imagery are increasingly making more applications possible in urban environments [...]

Description: Geo-Kompsat-2A (Geostationary-Korean Multi-Purpose SATtellite-2A, GK2A), a new generation of Korean geostationary meteorological satellite, carry state-of-the-art optical sensors with significantly higher radiometric, spectral, and spatial resolution than the Communication, Ocean, and Meteorological Satellite (COMS) previously available in the geostationary orbit. The new Advanced Meteorological Imager (AMI) on GK2A has 16 observation channels, and its spatial resolution is 0.5 or 1 km for visible channels and 2 km for near-infrared and infrared channels. These advantages, when combined with shortened revisit times (around 10 min for full disk and 2 min for sectored regions), provide new levels of capacity for the identification and tracking of rapidly changing weather phenomena and for the derivation of quantitative products. These improvements will bring about unprecedented levels of performance in nowcasting services and short-range weather forecasting systems. Imagery from the satellites is distributed and disseminated to users via multiple paths, including internet services and satellite broadcasting services. In post-launch performance validation, infrared channel calibration is accurate to within 0.2 K with no significant diurnal variation using an approach developed under the Global Space-based Inter-Calibration System framework. Visible and near infrared channels showed unexpected seasonal variations of approximately 5 to 10% using the ray matching method and lunar calibration. Image navigation was accurate to within requirements, 42 µrad (1.5 km), and channel-to-channel registration was also validated. This paper describes the features of the GK2A AMI, GK2A ground segment, and data distribution. Early performance results of AMI during the commissioning period are presented to demonstrate the capabilities and applications of the sensor.

Description: High Mountain Asia (HMA) hosts the largest glacier concentration outside of polar regions. It is also distinct glaciologically as it forms one of two major surge clusters globally, and many glaciers there contradict the globally observed glacier recession trend. Surging glaciers are critical to our understanding of HMA glacier dynamics, threshold behaviour and flow instability, and hence have been the subject of extensive research, yet many dynamical uncertainties remain. Using the cloud-based geospatial data platform, Google Earth Engine (GEE) and GEE-developed tool, GEEDiT, to identify and quantify trends in the distribution and phenomenological characteristics of surging glaciers synoptically across HMA, we identified 137 glaciers as surging between 1987–2019. Of these, 55 were newly identified, 15 glaciers underwent repeat surges, and 18 were identified with enhanced glaciological hazard potential, most notably from Glacier Lake Outburst Floods (GLOFs). Terminus position time series analysis from 1987–2019 facilitated the development of a six-part phenomenological classification of glacier behaviour, as well as quantification of surge variables including active phase duration, terminus advance distance and rate, and surge periodicity. This research demonstrates the application of remote sensing techniques and the GEE platform to develop our understanding of surging glacier distribution and terminus phenomenology across large areas, as well as their ability to highlight potential geohazard locations, which can subsequently be used to focus monitoring efforts.

Description: Digital elevation models (DEMs) are the basic data of science and engineering technology research. SRTM and ASTER GDEM are currently widely used global DEMs, and TanDEM-X DEM, released in 2016, has attracted users’ attention due to its unprecedented accuracy. These global datasets are often used for local applications and the quality of DEMs affects the results of applications. Many researchers have assessed and compared the quality of global DEMs on a local scale. To provide some additional insights on quality assessment of 12- and 30-m resolution TanDEM-X DEMs, 30-m resolution ASTER GDEM and 30-m resolution SRTM, this study assessed differences’ performance in relation to not only geographical features but also the ways in which DEMs have been created on selected Chinese sites, taking ICESat/GLAS points with 14-cm absolute vertical accuracy but size of 70-m diameter and 12-m resolution TanDEM-X DEM with less than 10-m absolute vertical accuracy as the reference data for comprehensive quality evaluation. When comparing the three 30-m DEMs with the reference DEM, an improved Least Z-Difference (LZD) method was applied for co-registration between models, and Quantile–Quantile (Q-Q) plot was used to identify if the DEM errors follow a normal distribution to help choose proper statistical indicators accordingly. The results show that: (1) TanDEM-X DEMs have the best overall quality, followed by SRTM. ASTER GDEM has the worst quality. The 12-m TanDEM-X DEM has significant advantages in describing terrain details. (2) The quality of DEM has a strong relationship with slope, aspect and land cover. However, the relationship between aspect and vertical quality weakens after data co-registration. The quality of DEMs gets higher with the increasing number of images used in the fusion process. The quality in where slopes opposite to the radar beam is the worst for SRTM, which could provide a new perspective for quality assessment of SRTM and other DEMs whose incidence angle files are available. (3) Systematic deviations can reduce the vertical quality of DEM. The differences have non-normal distribution even after co-registration. For researchers who want to know the quality of a DEM in order to use it in further applications, they should pay more attention to the terrain factors and land cover in their study areas and the ways in which the DEM has been created.

Description: Changes in climate extremes have a profound impact on vegetation growth. In this study, we employed the Moderate Resolution Imaging Spectroradiometer (MODIS) and a recently published climate extremes dataset (HadEX3) to study the temporal and spatial evolution of vegetation cover, and its responses to climate extremes in the arid region of northwest China (ARNC). Mann-Kendall test, Anomaly analysis, Pearson correlation analysis, Time lag cross-correlation method, and Least absolute shrinkage and selection operator logistic regression (Lasso) were conducted to quantitatively analyze the response characteristics between Normalized Difference Vegetation Index (NDVI) and climate extremes from 2000 to 2018. The results showed that: (1) The vegetation in the ARNC had a fluctuating upward trend, with vegetation significantly increasing in Xinjiang Tianshan, Altai Mountain, and Tarim Basin, and decreasing in the central inland desert. (2) Temperature extremes showed an increasing trend, with extremely high-temperature events increasing and extremely low-temperature events decreasing. Precipitation extremes events also exhibited a slightly increasing trend. (3) NDVI was overall positively correlated with the climate extremes indices (CEIs), although both positive and negative correlations spatially coexisted. (4) The responses of NDVI and climate extremes showed time lag effects and spatial differences in the growing period. (5) Precipitation extremes were closely related to NDVI than temperature extremes according to Lasso modeling results. This study provides a reference for understanding vegetation variations and their response to climate extremes in arid regions.

Description: In this study, a comprehensive assessment on precipitation estimation from the latest Version 06 release of the Integrated Multi-satellitE Retrievals for Global Precipitation Measurement (IMERG) algorithm is conducted by using 24 rain gauge observations at daily scale from 2001 to 2016. The IMERG V06 dataset fuses Tropical Rainfall Measuring Mission (TRMM) satellite data (2000–2015) and Global Precipitation Measurement (GPM) satellite data (2014–present), enabling the use of IMERG data for long-term study. Correlation coefficient (CC), root mean square error (RMSE), relative bias (RB), probability of detection (POD), false alarm ratio (FAR), and critical success index (CSI) were used to assess the accuracy of satellite-derived precipitation estimation and measure the correspondence between satellite-derived and observed occurrence of precipitation events. The probability density distributions of precipitation intensity and influence of elevation on precipitation estimation were also examined. Results showed that, with high CC and low RMSE and RB, the IMERG Final Run product (IMERG-F) performs better than two other IMERG products at daily, monthly, and yearly scales. At daily scale, the ability of satellite products to detect general precipitation is clearly superior to the ability to detect heavy and extreme precipitation. In addition, CC and RMSE of IMERG products are high in Southeastern Jinan City, while RMSE is relatively low in Southwestern Jinan City. Considering the fact that the IMERG estimation of extreme precipitation indices showed an acceptable level of accuracy, IMERG products can be used to derive extreme precipitation indices in areas without gauged data. At all elevations, IMERG-F exhibits a better performance than the other two IMERG products. However, POD and FAR decrease and CSI increase with the increase of elevation, indicating the need for improvement. This study will provide valuable information for the application of IMERG products at the scale of a large city.

Description: Vehicle density and technological development increase the need for road and pedestrian safety systems. Identifying problems and addressing them through the development of systems to reduce the number of accidents and loss of life is imperative. This paper proposes the analysis and management of dangerous situations, with the help of systems and modules designed in this direction. The approach and classification of situations that can cause accidents is another feature analyzed in this paper, including detecting elements of a psychosomatic nature: analysis and detection of the conditions a driver goes through, pedestrian analysis, and maintaining a preventive approach, all of which are embedded in a modular architecture. The versatility and usefulness of such a system come through its ability to adapt to context and the ability to communicate with traffic safety systems such as V2V (vehicle-to-vehicle), V2I (vehicle-to-infrastructure), V2X (vehicle-to-everything), and VLC (visible light communication). All these elements are found in the operation of the system and its ability to become a portable device dedicated to road safety based on (radio frequency) RF-VLC (visible light communication).

Description: Convolutional neural networks (CNNs) have been widely used in change detection of synthetic aperture radar (SAR) images and have been proven to have better precision than traditional methods. A two-stage patch-based deep learning method with a label updating strategy is proposed in this paper. The initial label and mask are generated at the pre-classification stage. Then a two-stage updating strategy is applied to gradually recover changed areas. At the first stage, diversity of training data is gradually restored. The output of the designed CNN network is further processed to generate a new label and a new mask for the following learning iteration. As the diversity of data is ensured after the first stage, pixels within uncertain areas can be easily classified at the second stage. Experiment results on several representative datasets show the effectiveness of our proposed method compared with several existing competitive methods.

Description: Woody species encroachment on grassland ecosystems is occurring worldwide with both negative and positive consequences for biodiversity conservation and ecosystem services. Remote sensing and image analysis represent useful tools for the monitoring of this process. In this paper, we aimed at evaluating quantitatively the potential of using high-resolution UAV imagery to monitor the encroachment process during its early development and at comparing the performance of manual and semi-automatic classification methods. The RGB images of an abandoned subalpine grassland on the Western Italian Alps were acquired by drone and then classified through manual photo-interpretation, with both pixel- and object-based semi-automatic models, using machine-learning algorithms. The classification techniques were applied at different resolution levels and tested for their accuracy against reference data including measurements of tree dimensions collected in the field. Results showed that the most accurate method was the photo-interpretation (≈99%), followed by the pixel-based approach (≈86%) that was faster than the manual technique and more accurate than the object-based one (≈78%). The dimensional threshold for juvenile tree detection was lower for the photo-interpretation but comparable to the pixel-based one. Therefore, for the encroachment mapping at its early stages, the pixel-based approach proved to be a promising and pragmatic choice.

Description: To investigate the possible impact of urban development on lightning activity, an eight-year (2010–2017) cloud-to-ground (CG) lightning dataset provided by the National-Wide Lightning Detection Network in China was analyzed to characterize the CG lightning activity in the metropolitan area of Beijing. There is a high CG flash density area over the downtown of Beijing, but different from previous studies, the downwind area of Beijing is not significantly enhanced. Compared with the upwind area, the CG flash density in the downtown area was enhanced by about 50%. Negative CG flashes mainly occurred in the downtown and industrial area, while positive CG flashes were distributed evenly. The percentage of positive CG flashes with Ipeak ≥ 75 kA is more than six times that of the corresponding negative CG flashes in the Beijing area. The enhancement of lightning activity varies with season and time. About 98% of CG flashes occurred from May to September, and the peak of CG diurnal variation is from 1900 to 2100 local time. Based on the analysis of thunderstorm types in Beijing, it is considered that the abnormal lightning activity is mainly responsible for an enhancement of the discharge number in frontal systems rather than the increase of the number of local thunderstorms. In addition, there is a non-linear relationship between pollutant concentrations and CG flash number, which indicates that there are other critical factors affecting the production of lightning.

Description: Land use/land cover (LULC) maps are a key input in environmental evaluations for the sustainable planning and management of socio-ecological systems. While the impact of map spatial resolution on environmental assessments has been evaluated by several studies, the effect of thematic resolution (the level of detail of LU/LC typologies) is discordant and still poorly investigated. In this paper, four scenarios of thematic resolutions, corresponding to the four levels of the CORINE classification scheme, have been compared in a real case study of landscape connectivity assessment, a major aspect for the biodiversity conservation and ecosystem service provision. The PANDORA model has been employed to investigate the effects of LULC thematic resolution on Bio-Energy Landscape Connectivity (BELC) at the scale of the whole system, landscape units, and single land cover patches, also in terms of ecosystem services. The results show different types of impacts on landscape connectivity due to the changed spatial pattern of the LULC classes across the four thematic resolution scenarios. Moreover, the main priority areas for conservation objectives and future sustainable urban expansion have been identified. Finally, several indications are given for supporting practitioners and researchers faced with thematic resolution issues in environmental assessment and land use planning.

Description: In the light of the “Biological Diversity” concept, habitats are cardinal pieces for biodiversity quantitative estimation at a local and global scale. In Europe EUNIS (European Nature Information System) is a system tool for habitat identification and assessment. Earth Observation (EO) data, which are acquired by satellite sensors, offer new opportunities for environmental sciences and they are revolutionizing the methodologies applied. These are providing unprecedented insights for habitat monitoring and for evaluating the Sustainable Development Goals (SDGs) indicators. This paper shows the results of a novel approach for a spatially explicit habitat mapping in Italy at a national scale, using a supervised machine learning model (SMLM), through the combination of vegetation plot database (as response variable), and both spectral and environmental predictors. The procedure integrates forest habitat data in Italy from the European Vegetation Archive (EVA), with Sentinel-2 imagery processing (vegetation indices time series, spectral indices, and single bands spectral signals) and environmental data variables (i.e., climatic and topographic), to parameterize a Random Forests (RF) classifier. The obtained results classify 24 forest habitats according to the EUNIS III level: 12 broadleaved deciduous (T1), 4 broadleaved evergreen (T2) and eight needleleaved forest habitats (T3), and achieved an overall accuracy of 87% at the EUNIS II level classes (T1, T2, T3), and an overall accuracy of 76.14% at the EUNIS III level. The highest overall accuracy value was obtained for the broadleaved evergreen forest equal to 91%, followed by 76% and 68% for needleleaved and broadleaved deciduous habitat forests, respectively. The results of the proposed methodology open the way to increase the EUNIS habitat categories to be mapped together with their geographical extent, and to test different semi-supervised machine learning algorithms and ensemble modelling methods.

Description: Geophysical prospecting methods have been extensively used to outline buried antiquities in terrestrial sites. Despite the frequent application of these mapping and imaging approaches for the detection of archaeological relics in deep-water marine environments (e.g., shipwrecks), the aforementioned processes have minimal contribution when it comes to understanding the dynamics of the past in coastal and shallow aquatic archaeological sites. This work explores the possibilities of multicomponent geophysical techniques in revealing antiquities that have been submerged in diverse shallow coastal marine environments in the eastern Mediterranean. A group of four sites in Greece (Agioi Theodoroi, Olous, Lambayanna) and Cyprus (Pafos) spanning from prehistory to Roman times were chosen as test sites to validate the efficiency of electrical resistivity tomography, magnetic gradiometry, and ground penetrating radar methods. The comprehensive analysis of the geophysical data completed the picture for the hidden archeological elements in all the sites. The results manifest the significance and the potential of these methods for documenting and understanding the complex archaeological sites encountered in the Mediterranean. In view of climate change and the risks related to future sea level rise and erosion of low-level coastal areas, the results of this work could be integrated in a strategic framework to develop an effective interdisciplinary research model that can be applied to similar shallow water archaeological surveys, thus substantially contributing towards cultural resources management.

Description: Warming sea-surface temperatures (SSTs) have implications for the climate-sensitive Caribbean region, including potential impacts on precipitation. SSTs have been shown to influence deep convection and rainfall, thus understanding the impacts of warming SSTs is important for predicting regional hydrometeorological conditions. This study investigates the long-term annual and seasonal trends in convection using the Galvez-Davison Index (GDI) for tropical convection from 1982–2020. The GDI is used to describe the type and potential for precipitation events characterized by sub-indices that represent heat and moisture availability, cool/warm mid-levels at 500 hPa, and subsidence inversion, which drive the regional Late, Early, and Dry Rainfall Seasons, respectively. Results show that regional SSTs are warming annually and per season, while regionally averaged GDI values are decreasing annually and for the Dry Season. Spatial analyses show the GDI demonstrates higher, statistically significant correlations with precipitation across the region than with sea-surface temperatures, annually and per season. Moreover, the GDI climatology results show that regional convection exhibits a bimodal pattern resembling the characteristic bimodal precipitation pattern experienced in many parts of the Caribbean and surrounding region. However, the drivers of these conditions need further investigation as SSTs continue to rise while the region experiences a drying trend.

Description: The long-term changes of the relationship between nighttime light and urbanization related built-up areas are explored using nighttime light data obtained from the Defense Meteorological Satellite Program/Operational Linescan System (DMSP/OLS, data before 2013) and the Suomi National Polar-orbiting Partnership Visible Infrared Imaging Radiometer Suite (NPP/VIIRS, data after 2012) and information of the spatiotemporal heterogeneity of urban evolution. This study assimilates two datasets and diagnoses the spatial heterogeneity in administrative city scale based on built-up area tendencies, temporal heterogeneity in pixel scale based on nighttime light intensity tendencies, and GDP associated spatiotemporal variability over the Yangtze River Delta comparing the first two decades of this century (2001–2010 versus 2011–2019). The analysis reveals the following main results: (1) The built-up areas have generally increased in the second period with the center of fast expansion moving southward, including Suzhou-Wuxi-Changzhou, Hangzhou, Ningbo, Nanjing, and Hefei. (2) Urban development in the original city core has saturated and is spilling over to the suburbs and countryside, leading to nighttime light intensity tendency shift from a “rapid to moderate” and a “moderate to rapid” development (a “hot to cold” and a “cold to hot” spatial clustering distribution). (3) The tendency shifts of built-up area and nighttime light intensity occur most frequently in 2010, after which the urban development is transforming from light intensity growth to built-up area growth, particularly in the developed city cores. The urban agglomeration process with nighttime light intensity reaching saturation prior to the urban development spreading into the surrounding suburbs and countryside, appears to be a suitable model, which provides insights in addressing related environmental problems and contribute to regional sustainable urban planning and management.

Description: Soil organic carbon (SOC) is a key property for evaluating soil quality. SOC is thus an important parameter of agricultural soils and needs to be regularly monitored. The aim of this study is to explore the potential of synthetic aperture radar (SAR) satellite imagery (Sentinel-1), optical satellite imagery (Sentinel-2), and digital elevation model (DEM) data to estimate the SOC content under different land use types. The extreme gradient boosting (XGboost) algorithm was used to predict the SOC content and evaluate the importance of feature variables under different land use types. For this purpose, 290 topsoil samples were collected and 49 features were derived from remote sensing images and DEM. Feature selection was carried out to prevent data redundancy. Coefficient of determination (R2), mean absolute error (MAE), mean squared error (MSE), percent root mean squared error (%RMSE), ratio of performance to interquartile range (RPIQ), and corrected akaike information criterion (AICc) were employed for evaluating model performance. The results showed that Sentinel-1 and Sentinel-2 data were both important for the prediction of SOC and the prediction accuracy of the model differed with land use types. Among them, the prediction accuracy of this model is the best for orchard (R2 = 0.86 and MSE = 0.004%), good for dry land (R2 = 0.74 and MSE = 0.008%) and paddy field (R2 = 0.66 and MSE = 0.009%). The prediction model of SOC content is effective and can provide support for the application of remote sensing data to soil property monitoring.

Description: Ground Penetrating Radar (GPR) has proved to be a successful technique for the detection of landmines and Improvised Explosive Devices (IEDs) buried in the ground. In the last years, novel architectures for safe and fast detection, such as those based on GPR systems onboard Unmanned Aerial Vehicles (UAVs), have been proposed. Furthermore, improvements in GPR hardware and signal processing techniques have resulted in a more efficient detection. This contribution presents an experimental validation of a hybrid Forward-Looking–Down-Looking GPR architecture. The main goal of this architecture is to combine advantages of both GPR architectures: reduction of clutter coming from the ground surface in the case of Forward-Looking GPR (FLGPR), and greater dynamic range in the case of Down-Looking GPR (DLGPR). Compact radar modules working in the lower SHF frequency band have been used for the validation of the hybrid architecture, which involved realistic targets.

Description: The development of UAV (unmanned aerial vehicle) imaging technologies for precision farming applications is rapid, and new studies are published frequently. In cases where measurements are based on aerial imaging, there is the need to have ground truth or reference data in order to develop reliable applications. However, in several precision farming use cases such as pests, weeds, and diseases detection, the reference data can be subjective or relatively difficult to capture. Furthermore, the collection of reference data is usually laborious and time consuming. It also appears that it is difficult to develop generalisable solutions for these areas. This review studies previous research related to pests, weeds, and diseases detection and mapping using UAV imaging in the precision farming context, underpinning the applied reference measurement techniques. The majority of the reviewed studies utilised subjective visual observations of UAV images, and only a few applied in situ measurements. The conclusion of the review is that there is a lack of quantitative and repeatable reference data measurement solutions in the areas of mapping pests, weeds, and diseases. In addition, the results that the studies present should be reflected in the applied references. An option in the future approach could be the use of synthetic data as reference.

Description: The detection of Thermal Power Plants (TPPs) is a meaningful task for remote sensing image interpretation. It is a challenging task, because as facility objects TPPs are composed of various distinctive and irregular components. In this paper, we propose a novel end-to-end detection framework for TPPs based on deep convolutional neural networks. Specifically, based on the RetinaNet one-stage detector, a context attention multi-scale feature extraction network is proposed to fuse global spatial attention to strengthen the ability in representing irregular objects. In addition, we design a part-based attention module to adapt to TPPs containing distinctive components. Experiments show that the proposed method outperforms the state-of-the-art methods and can achieve 68.15% mean average precision.

Description: This study aimed to describe the interannual climate variability in the West Antarctic Peninsula (WAP) under austral summer conditions. Time series of January sea-surface temperature (SST) at 1 km spatial resolution from satellite-based multi-sensor data from Moderate Resolution Imaging Spectrometer (MODIS) Terra, MODIS Aqua, and Visible Infrared Imager Radiometer Suite (VIIRS) were compiled between 2001 and 2020 at localities near the Gerlache Strait and the Carlini, Palmer, and Rothera research stations. The results revealed a well-marked spatial-temporal variability in SST at the WAP, with a one-year warm episode followed by a five-year cold episode. Warm waters (SST 〉 0 °C) reach the coast during warm episodes but remain far from the shore during cold episodes. This behavior of warm waters may be related to the regional variability of the Antarctic Circumpolar Current, particularly when the South Polar Front (carrying warm waters) reaches the WAP coast. The WAP can be divided into two zones representing two distinct ecoregions: the northern zone (including the Carlini and Gerlache stations) corresponds to the South Shetland Islands ecoregion, and the southern zone (including the Palmer and Rothera stations) corresponds to the Antarctic Peninsula ecoregion. The Gerlache Strait is likely situated on the border between the two ecoregions but under a greater influence of the northern zone. Our data showed that the Southern Annular Mode (SAM) is the primary driver of SST variability, while the El Niño Southern Oscillation (ENSO) plays a secondary role. However, further studies are needed to better understand regional climate variability in the WAP and its relation with SAM and ENSO; such studies should use an index that adequately describes the ENSO in these latitudes and addresses the limitations of the databases used for this purpose. Multi-sensor data are useful in describing the complex climate variability resulting from the combination of local and regional processes that elicit different responses across the WAP. It is also essential to continue improving SST approximations at high latitudes.

Description: Cropmarks are a major factor in the effectiveness of traditional aerial archaeology. Identified almost 100 years ago, the positive and negative features shown by cropmarks are now well understood, as are the role of the different cultivated plants and the importance of precipitation and other elements of the physical environment. Generations of aerial archaeologists are in possession of empirical knowledge, allowing them to find as many cropmarks as possible every year. However, the essential analyses belong mostly to the predigital period, while the significant growth of datasets in the last 30 years could open a new chapter. This is especially true in the case of Hungary, as scholars believe it to be one of the most promising cropmark areas in Europe. The characteristics of soil formed of Late Quaternary alluvial sediments are intimately connected to the young geological/geomorphological background. The predictive soil maps elaborated within the framework of renewed data on Hungarian soil spatial infrastructure use legacy, together with recent remote sensing imagery. Based on the results from three study areas investigated, analyses using statistical methods (the Kolmogorov–Smirnov and Random Forest tests) showed a different relative predominance of pedological variables in each study area. The geomorphological differences between the study areas explain these variations satisfactorily.

Description: At present, accessing and processing Earth Observation (EO) data on different cloud platforms requires users to exercise distinct communication strategies as each backend platform is designed differently. The openEO API (Application Programming Interface) standardises EO-related contracts between local clients (R, Python, and JavaScript) and cloud service providers regarding data access and processing, simplifying their direct comparability. Independent of the providers’ data storage system, the API mimics the functionalities of a virtual EO raster data cube. This article introduces the communication strategy and aspects of the data cube model applied by the openEO API. Two test cases show the potential and current limitations of processing similar workflows on different cloud platforms and a comparison of the result of a locally running workflow and its openEO-dependent cloud equivalent. The outcomes demonstrate the flexibility of the openEO API in enabling complex scientific analysis of EO data collections on cloud platforms in a homogenised way.

Description: Persistent scatterer interferometry (PSI) is a group of advanced interferometric synthetic aperture radar (SAR) techniques used to measure and monitor terrain deformation. Sentinel-1 has improved the data acquisition throughout and, compared to previous sensors, increased considerably the differential interferometric SAR (DInSAR) and PSI deformation monitoring potential. The low density of persistent scatterer (PS) in non-urban areas is a critical issue in DInSAR and has inspired the development of alternative approaches and refinement of the PS chains. This paper proposes two different and complementary data-driven procedures to obtain terrain deformation maps. These approaches aim to exploit Sentinel-1 highly coherent interferograms and their short revisit time. The first approach, called direct integration (DI), aims at providing a very fast and straightforward approach to screen-wide areas and easily detects active areas. This approach fully exploits the coherent interferograms from consecutive images provided by Sentinel-1, resulting in a very high sampling density. However, it lacks robustness and its usability lays on the operator experience. The second method, called persistent scatterer interferometry geomatics (PSIG) short temporal baseline, provides a constrained application of the PSIG chain, the CTTC approach to the PSI. It uses short temporal baseline interferograms and does not assume any deformation model for point selection. It is also quite a straightforward approach, which improves the performances of the standard PSIG approach, increasing the PS density and providing robust measurements. The effectiveness of the approaches is illustrated through analyses performed on different test sites.

Description: The Gravity Recovery and Climate Experiment (GRACE) mission has measured total water storage change (TWSC) and interpreted drought patterns in an unparalleled way since 2002. Nevertheless, there are few sources that can be used to understand drought patterns prior to the GRACE era. In this study, we extended the gridded GRACE TWSC to 1993 by combining principal component analysis (PCA), least square (LS) fitting, and multiple linear regression (MLR) methods using climate variables as input drivers. We used the extended (climate-driven) TWSC to interpret drought patterns (1993–2019) over the Amazon basin. Results showed that, in the Amazon area with the resolution of 0.5°, GRACE, GRACE follow on, and Swarm had correlation coefficients of 0.95, 0.92, and 0.77 compared with climate-driven TWSCS, respectively. The drought patterns assessed by the climate-driven TWSC were consistent with those interpreted by the Palmer Drought Severity Index and GRACE TWSC. We also found that the 1998 and 2016 drought events in the Amazon, both induced by strong El Niño events, showed similar drought patterns. This study provides a new perspective for interpreting long-term drought patterns prior to the GRACE period.

Description: Human mobilization during the COVID-19 lockdown has been reduced in many areas of the world. Maritime navigation has been affected in strategic connections between some regions in Patagonia, at the southern end of South America. The purpose of this research is to describe this interruption of navigation using satellite synthetic aperture radar data. For this goal, three locations are observed using geoinformatic techniques and high-resolution satellite data from the Sentinel-1 satellites of the European Commission’s Copernicus programme. The spatial information is analyzed using the Google Earth Engine (GEE) platform as a global geographical information system and the EO Browser tool, integrated with several satellite data. The results demonstrate that the total maritime traffic activity in the three geographical hotspots selected along western Patagonia, the Chacao Channel, crossing of the Reloncavi Fjord and the Strait of Magellan was totally interrupted during April–May 2020. This fact has relevant repercussions for the population living in isolated areas, such as many places in Patagonia, including Tierra del Fuego. The study also demonstrates the relevance of satellite radar observations in coastal areas with severe cloud cover, such as the one evaluated here.

Description: Optical sensors are increasingly sought to estimate the amount of chlorophyll a (chl_a) in freshwater bodies. Most, whether empirical or semi-empirical, are data-oriented. Two main limitations are often encountered in the development of such models. The availability of data needed for model calibration, validation, and testing and the locality of the model developed—the majority need a re-parameterization from lake to lake. An Unmanned aerial vehicle (UAV) data-based model for chl_a estimation is developed in this work and tested on Sentinel-2 imagery without any re-parametrization. The Ensemble-based system (EBS) algorithm was used to train the model. The leave-one-out cross validation technique was applied to evaluate the EBS, at a local scale, where results were satisfactory (R2 = Nash = 0.94 and RMSE = 5.6 µg chl_a L−1). A blind database (collected over 89 lakes) was used to challenge the EBS’ Sentine-2-derived chl_a estimates at a regional scale. Results were relatively less good, yet satisfactory (R2 = 0.85, RMSE= 2.4 µg chl_a L−1, and Nash = 0.79). However, the EBS has shown some failure to correctly retrieve chl_a concentration in highly turbid waterbodies. This particularity nonetheless does not affect EBS performance, since turbid waters can easily be pre-recognized and masked before the chl_a modeling.

Description: Hyperspectral imaging (HSI) is an emerging rapid and non-destructive technology that has promising application within feed mills and processing plants in poultry and other intensive animal industries. HSI may be advantageous over near infrared spectroscopy (NIRS) as it scans entire samples, which enables compositional gradients and sample heterogenicity to be visualised and analysed. This study was a preliminary investigation to compare the performance of HSI with that of NIRS for quality measurements of ground samples of Australian wheat and to identify the most important spectral regions for predicting carbon (C) and nitrogen (N) concentrations. In total, 69 samples were scanned using an NIRS (400–2500 nm), and two HSI cameras operated in 400–1000 nm (VNIR) and 1000–2500 nm (SWIR) spectral regions. Partial least square regression (PLSR) models were used to correlate C and N concentrations of 63 calibration samples with their spectral reflectance, with 6 additional samples used for testing the models. The accuracy of the HSI predictions (full spectra) were similar or slightly higher than those of NIRS (NIRS Rc2 for C = 0.90 and N = 0.96 vs. HSI Rc2 for C (VNIR) = 0.97 and N (SWIR) = 0.97). The most important spectral region for C prediction identified using HSI reflectance was 400–550 nm with R2 of 0.93 and RMSE of 0.17% in the calibration set and R2 of 0.86, RMSE of 0.21% and ratio of performance to deviation (RPD) of 2.03 in the test set. The most important spectral regions for predicting N concentrations in the feed samples included 1451–1600 nm, 1901–2050 nm and 2051–2200 nm, providing prediction with R2 ranging from 0.91 to 0.93, RMSE ranging from 0.06% to 0.07% in the calibration sets, R2 from 0.96 to 0.99, RMSE of 0.06% and RPD from 3.47 to 3.92 in the test sets. The prediction accuracy of HSI and NIRS were comparable possibly due to the larger statistical population (larger number of pixels) that HSI provided, despite the fact that HSI had smaller spectral range compared with that of NIRS. In addition, HSI enabled visualising the variability of C and N in the samples. Therefore, HSI is advantageous compared to NIRS as it is a multifunctional tool that poses many potential applications in data collection and quality assurance within feed mills and poultry processing plants. The ability to more accurately measure and visualise the properties of feed ingredients has potential economic benefits and therefore additional investigation and development of HSI in this application is warranted.

Description: The satellite-based estimation of the dust mass concentration (DMC) is essential for accurately evaluating the global biogeochemical cycle of the dust aerosols. As for the uncertainties in estimating DMC caused by mixing dust and pollutants and assuming a fixed value for the mass extinction efficiency (MEE), a classic lidar-photometer method is employed to identify and separate the dust from pollutants, obtain the dust MEE, and evaluate the effect of the above uncertainties, during five dust field experiments in Northwest China. Our results show that this method is effective for continental aerosol mixtures consisting of dust and pollutants. It is also seen that the dust loading mainly occurred in the free troposphere (

Description: Deep convolutional neural networks (CNNs) are widely used in hyperspectral image (HSI) classification. However, the most successful CNN architectures are handcrafted, which need professional knowledge and consume a very significant amount of time. To automatically design cell-based CNN architectures for HSI classification, we propose an efficient continuous evolutionary method, named CPSO-Net, which can dramatically accelerate optimal architecture generation by the optimization of weight-sharing parameters. First, a SuperNet with all candidate operations is maintained to share the parameters for all individuals and optimized by collecting the gradients of all individuals in the population. Second, a novel direct encoding strategy is devised to encode architectures into particles, which inherit the parameters from the SuperNet. Then, particle swarm optimization is used to search for the optimal deep architecture from the particle swarm. Furthermore, experiments with limited training samples based on four widely used biased and unbiased hyperspectral datasets showed that our proposed method achieves good performance comparable to the state-of-the-art HSI classification methods.

Description: In this study, we demonstrate that the Google Earth Engine (GEE) dataset of Sentinel-3 Ocean and Land Color Instrument (OLCI) level-1 deviates from the original Copernicus Open Access Data Hub Service (DHUS) data by 10–20 W m−2 sr−1μμm−1 per pixel per band. We compared GEE and DHUS single pixel time series for the period from April 2016 to September 2020 and identified two sources of this discrepancy: the ground pixel position and reprojection. The ground pixel position of OLCI product can be determined in two ways: from geo-coordinates (DHUS) or from tie-point coordinates (GEE). We recommend using geo-coordinates for pixel extraction from the original data. When the Sentinel Application Platform (SNAP) Pixel Extraction Tool is used, an additional distance check has to be conducted to exclude pixels that lay further than 212 m from the point of interest. Even geo-coordinates-based pixel extraction requires the homogeneity of the target area at a 700 m diameter (49 ha) footprint (double of the pixel resolution). The GEE OLCI dataset can be safely used if the homogeneity assumption holds at 2700 m diameter (9-by-9 OLCI pixels) or if the uncertainty in the radiance of 10% is not critical for the application. Further analysis showed that the scaling factors reported in the GEE dataset description must not be used. Finally, observation geometry and meteorological data are not present in the GEE OLCI dataset, but they are crucial for most applications. Therefore, we propose to calculate angles and extraterrestrial solar fluxes and to use an alternative data source—the Copernicus Atmosphere Monitoring Service (CAMS) dataset—for meteodata.

Description: In the Bering Sea around and off the Yukon River delta, surface sediment plumes are markedly formed by glacier-melt and rainfall sediment runoffs of the Yukon River, Alaska, in June– September. The discharge and sediment load time series of the Yukon River were obtained at the lowest gauging station of US Geological Survey in June 2006–September 2010. Meanwhile, by coastal observations on boat, it was found out that the river plume plunges at a boundary between turbid plume water and clean marine water at the Yukon River sediment load of more than ca. 2500 kg/s. Grain size analysis with changing salinity (‰) for the river sediment indicated that the suspended sediment becomes coarse at 2 to 5‰ by flocculation. Hence, the plume’s plunging probably occurred by the flocculation of the Yukon suspended sediment in the brackish zone upstream of the plunging boundary, where the differential settling from the flocculation is considered to have induced the turbid water intrusion into the bottom layer.

Description: Precipitation science is a growing research field. It is concerned with the study of the water cycle from a broad perspective, from tropical to polar research and from solid precipitation to humidity and microphysics. It includes both modeling and observations. Drawing on the results of several meetings within the International Collaborative Experiments for the PyeongChang 2018 Olympics and Paralympic Winter Games (ICE-POP 2018), and on two Special Issues hosted by Remote Sensing starting with “Winter weather research in complex terrain during ICE-POP 2018”, this paper completes the “Precipitation and Water Cycle” Special Issue by providing a perspective on the future research directions in the field.

Description: Three-dimensional (3D) building models play an important role in digital cities and have numerous potential applications in environmental studies. In recent years, the photogrammetric point clouds obtained by aerial oblique images have become a major source of data for 3D building reconstruction. Aiming at reconstructing a 3D building model at Level of Detail (LoD) 2 and even LoD3 with preferred geometry accuracy and affordable computation expense, in this paper, we propose a novel method for the efficient reconstruction of building models from the photogrammetric point clouds which combines the rule-based and the hypothesis-based method using a two-stage topological recovery process. Given the point clouds of a single building, planar primitives and their corresponding boundaries are extracted and regularized to obtain abstracted building counters. In the first stage, we take advantage of the regularity and adjacency of the building counters to recover parts of the topological relationships between different primitives. Three constraints, namely pairwise constraint, triplet constraint, and nearby constraint, are utilized to form an initial reconstruction with candidate faces in ambiguous areas. In the second stage, the topologies in ambiguous areas are removed and reconstructed by solving an integer linear optimization problem based on the initial constraints while considering data fitting degree. Experiments using real datasets reveal that compared with state-of-the-art methods, the proposed method can efficiently reconstruct 3D building models in seconds with the geometry accuracy in decimeter level.

Description: On 28 December 2020, seismic activity in the wider Petrinja area strongly intensified after a period of relative seismological quiescence that had lasted more than 100 years (since the well-known M5.8 Kupa Valley earthquake of 1909, which is known based on the discovery of the Mohorovičić discontinuity). The day after the M5 foreshock, a destructive M6.2 mainshock occurred. Outcomes of preliminary seismological, geological and SAR image analyses indicate that the foreshocks, mainshock and aftershocks were generated due to the (re)activation of a complex fault system—the intersection of longitudinal NW–SE right-lateral and transverse NE–SW left-lateral faults along the transitional contact zone of the Dinarides and the Pannonian Basin. According to a survey of damage to buildings, approximately 15% of buildings were very heavily damaged or collapsed. Buildings of special or outstanding historical or cultural heritage significance mostly collapsed or became unserviceable. A preliminary analysis of the earthquake ground motion showed that in the epicentral area, the estimated peak ground acceleration PGA values for the bedrock ranged from 0.29 to 0.44 g. In the close Petrinja epicentral area that is characterized by the superficial deposits, significant ground failures were reported within local site effects. Based on that finding and building damage, we assume that the resulting peak ground acceleration (PGAsite) values were likely between 0.4 and 0.6 g depending on the local site characteristics and the distance from the epicentre.

Description: Edge applications evolved into a variety of scenarios that include the acquisition and compression of immense amounts of images acquired in space remote environments such as satellites and drones, where characteristics such as power have to be properly balanced with constrained memory and parallel computational resources. The CCSDS-123 is a standard for lossless compression of multispectral and hyperspectral images used in on-board satellites and military drones. This work explores the performance and power of 3 families of low-power heterogeneous Nvidia GPU Jetson architectures, namely the 128-core Nano, the 256-core TX2 and the 512-core Xavier AGX by proposing a parallel solution to the CCSDS-123 compressor on embedded systems, reducing development effort, compared to the production of dedicated circuits, while maintaining low power. This solution parallelizes the predictor on the low-power GPU while the entropy encoders exploit the heterogeneous multiple CPU cores and the GPU concurrently. We report more than 4.4 GSamples/s for the predictor and up to 6.7 Gb/s for the complete system, requiring less than 11 W and providing an efficiency of 611 Mb/s/W.