ALBERT

Notes: Microstructures in slate belt rocks at the Elura Mine, near Cobar, south-eastern Australia, indicate that volume loss by syntectonic dissolution is coupled with mass accretion by reprecipitation of the dissolved material in dilational sites. The mass accretion is sustained primarily by repetitive tensile microfracturing at high pore-fluid pressures. Oriented growth in the inter- and intragranular microcracks is locally host-controlled, creating lattice- and shape-preferred orientations. The grain-scale crack-seal features throughout the rock reflect rhythmic fluid pressure fluctuations; a balance is achieved between the fracture-induced permeability (and consequent flushing rates), and the rate of fluid build-up in a relatively sealed environment.Instability in the balancing factors can lead to localization and intensification of tensile failure (and hence, tension vein formation) in the grain aggregate. Growth of veins by crack-seal also reflects a steady state, but with more localized fluctuations of fluid flow on the aggregate scale. Still larger imbalances between flushing and fluid accumulation (i.e. pressure variations) induce breccia veining. The larger pressure gradients over greater distances, associated with dilation localization (from pervasive microfracturing to spaced breccia domains), allow fluid channelling with an increased potential for chemical fluid/rock disequilibrium. Therefore, large breccia vein systems tend to be sites of extensive fluid/rock interaction and replacement, as spectacularly illustrated by the syntectonic sulphide orebodies at Elura. The huge amounts of silicate, carbonate and sulphide accumulated during folding at Elura illustrate the large scale of source and sink couples possible in solute mass transfer.

Notes: The Internal Zone of the Betic Cordilleras consists of several superimposed major thrust sheets with different P-T-t evolutions. On the basis of an integrated field, microscopic and laboratory study, the tectono-metamorphic history of the Mulhacen Complex and Almanzora Unit has been reconstructed in detail. The Mulhacen Complex has been affected by at least five phases of penetrative deformation, which have been labelled Dx-1, Dx, Dx+1, Dx+2 and Dx+3. Dx-1, and Dx are related to continent-continent collision, which is indicated by high pressure-low temperature (HP/LT) and subsequent intermediate P/T metamorphic conditions. Dx+1 is related to crustal thinning and heterogeneous extension. During this event the Almanzora Unit was juxtaposed against the Mulhacen Complex. This phase was succeeded by the establishment of low pressure-high temperature (LP/HT) conditions and at least two phases of folding and overthrusting. The Almanzora Unit shows a comparable tectono-metamorphic evolution post Dx+1. However, the P/T conditions prior to Dx+1 indicate a higher crustal position with respect to the Mulhacen Complex during the collisional event.

Notes: Following the Middle Devonian Acadian deformation an extensive belt of high grade metamorphism was formed in New England. In south-western Maine, at the northern end of this belt, there occurs a transition along the strike from regional low-pressure/high-temperature metamorphism to contact metamorphism in low-grade rocks. Petrological studies indicate that this transition occurs along a surface plunging to the north-east at about 3.5°, with respect to the Middle-to-Late Devonian erosion surface. In addition, detailed petrological mapping has defined a history of temporally separate, localized metamorphic events associated with plutonism and occurring at increasingly deeper levels to the south-west. Geochronological studies constrain ambient temperatures in the transition zone at the time of metamorphism to be less than 300° C in the north-east and between 350° C and 500° C in the south-west. They also establish a pattern of diachronous cooling due to differential uplift and erosion, with cooling occurring later and most rapidly to the south-west. Geophysical evidence suggests that along with this spatial variation in metamorphic style the shapes of the plutons in Maine undergo a transition from laterally extensive sheet-like bodies in the high grade terrane to more equant-shaped bodies in the low-grade terrane. Using the results of these petrological, geochronological and geophysical studies, as well as those of stratigraphical and structural studies we construct a thermal model for the transition zone. The model suggests that the Acadian metamorphism in south-western Maine is a result of deep-level contact metamorphism near laterally extensive granitic sills dipping to the north-east with respect to the present erosion surface. The plutons themselves are interpreted to be a result of lower crustal melting in response to crustal thickening in the presence of normal or slightly augmented mantle heat flux.

Notes: Abstract Regionally distributed pelitic granulites in the Wilson Lake region contain the assemblage sapphirine + hypersthene + sillimanite + quartz. Geochronology and geobarometry suggest it developed in early Proterozoic rocks at temperatures approaching 900°C and pressures above 10 kbar. Vein-like metasomatized rocks around a suite of mafic to ultramafic intrusions, emplaced near the peak of metamorphism about 1700 Ma ago, contain sapphirine, but these assemblages developed at temperatures near 750°C and pressures of 4.5 kbar. Both types of assemblage occur as relics in amphibolite-grade (biotite–sillimanite) migmatites. P–T determinations indicate rapid isothermal uplift of 20 km accompanied by mafic intrusion and hydration. The metamorphic history and tectonic setting suggest exposure of deep continental crust by thrusting during continental collision, followed by essentially isothermal decompression.

Notes: Abstract The effects of Tertiary Alpine metamorphism on pelitic Mesozoic cover rocks have been studied along a cross-section in the central Lepontine Alps in the Nufenen Pass area, Switzerland.Greenschist facies to amphibolite facies conditions are indicated by the formation of the index minerals chloritoid, garnet, staurolite and kyanite in pelitic rocks. Regional metamorphism reached maximum conditions during the interkinematic period between a main Alpine penetrative (D2) and a late Alpine (D3) crenulation type deformation phase or synchronous with the late Alpine deformation. Based on AFM phase relationships four different metamorphic zones can be distinguished: (1) chloritoid zone; (2) staurolite + chlorite zone; (3) staurolite + biotite zone; and, (4) kyanite zone.The isograds that separate these zones can be modelled by univariant reactions in the KFMASH system. The conditions of metamorphism calculated from geological ther-mobarometers for the maximum post-D2 por-phyroblast stage are from North to South: 500° C at 5-6 kbar and 600° C at 7-8 kbar.Detailed thermobarometry of garnet por-phyroblasts with complex textures suggests that maximum temperature was reached later than maximum pressure. Early garnet growth occurred along a prograde P-T-path, post-D2 rims grew with increasing temperature but decreasing pressure, and finally post-D3 garnet formed along a retrograde P-T-path.It may be concluded from the calculated pressure and temperature difference over a short distance (3 km) across the mapped area that the isogradic surfaces of the post-D2 metamorphism are steeply oriented. The data also suggest that isobaric and isothermal surfaces are parallel.Much of the observed metamorphic pattern can be explained as the result of a significant post-D2 differential uplift of the hot Pennine area relative to the Helvetic area along a tectonic contact zone. The closely spaced isograds (isotherms) in the North may then be interpreted as a thermal effect owing to the emplacement of the hot Pennine rocks against the Got-thard massif with its cover. Whereas, in the Pennine metasediments, post-D2 porphyroblast formation can be related to the decompression path which was steep enough for dehydration reactions to proceed. It is also remarkable that late kyanite porphyroblasts probably formed with decreasing pressure.The interpretation given here for the Nufenen Pass area may also apply to the Luk-manier Pass area where similar metamorphic patterns have been reported by Fox (1975). The formation of the ‘Northern Steep Belt’;, as denned by Milnes (1974b), and the associated late Alpine fold zones may, therefore, have significantly modified the metamorphic pattern of the Helvetic-Penninic contact zone.

Notes: Abstract Porphyroblast textures in a Karakorum phyllite reveal that porphyroblast growth was syn-tectonic with respect to a cleavage forming deformation. During and after porphyroblast growth it partitions the deformation such that zones of intensified cleavage are developed which wrap around the porphyroblast whilst the porphyroblast and its strain shadow undergo little deformation. Porphyroblast strain shadows comprise quartz, calcite and felspar with little mica, and are probably formed by solution transfer during deformation. Unless the deformation is so strongly partitioned that no deformation of the porphyroblasts and their immediate surrounds occurs, inequidimensional porphyroblasts will rotate. Porphyroblasts undergo some dissolution after they have finished growing.

Notes: Abstract New isotopic (Rb–Sr, U–Pb zircon and Sm–Nd) and petrological data are presented for part of an extensive Proterozoic mobile belt (locally known as the Rayner Complex) in East Antarctica. Much of the belt is the product of Mid-Proterozoic (∼ 1800–2000 Ma) juvenile crustal formation. Melting of this crust at about 1500 Ma ago produced the felsic magmas from which the dominant orthogneisses of this terrain were subsequently derived. Deformation and transitional granulite-amphibolite facies conditions (which peaked at 750 ± 50°C and 7–8 kbar (0.7–0.8 GPa) produced open to tight folding about E–W axes and syn-tectonic granitoids about 960 Ma ago. Subsequent felsic magmatism occurred at about 770 Ma and not, as has been widely advocated, at 500–550 Ma, which appears to have been a time of widespread upper greenschist facies (400–500°C) metamorphism, localized shearing and faulting.Sm-Nd model ages of 1.65–2.18 Ga disprove a previously favoured hypothesis that the Rayner Complex mostly represents reworked Archaean rocks from the neighbouring craton (Napier Complex). Models that involve rehydration of the Napier Complex are no longer required, since the Rayner Complex was its own source of water. Two episodes of Proterozoic crustal growth are identified, the later of which occurred between about 1200 Ma and 1000 Ma, and was relatively minor. Sedimentation took place only shortly before Late Proterozoic orogenesis.The multiphase history of the Rayner Complex has resulted in complex isotopic behaviour. Three temporally discrete episodes of Pb loss from zircon have been identified, the earliest two of which are responses to the c. 960 Ma and 540 Ma tectonothermal events. Fluid leaching was operative during the later event for there is a good correlation between degree of isotopic discordance and secondary mineral growth. Pb loss during the high-grade event was probably governed by the same process or by lattice annealing. Some zircon suites also document recent Pb loss. Most lower concordia intercepts have no direct geological meaning and are explicable as mixed ages produced by incomplete Pb loss during two or more secondary events. Whereas all zircon separates from the orthogneisses produce U–Pb isotopic alignments, zircons from the only analysed paragneiss produce scattered data, in part reflecting a range of provenance. The 960 Ma event was also associated with the growth of a characteristically low U zircon (∼ 300 μg/g) in rocks of inferred high Zr content.There is ubiquitous evidence for the resetting of Rb–Sr total-rock isochrons. Even samples separated by up to 10 km fail to produce igneous crystallization ages. Minor mineralogical changes produced by the 540 Ma upper greenschist-facies metamorphism were sufficient to almost completely reset some Rb–Sr isochrons and to produce open system conditions on outcrop scale, at least in one location.

Notes: Abstract The preserved array of pressures in the eastern Dalradian indicates that considerable syn- to post-metamorphic differential uplift has occurred. This inferred differential uplift suggests that Buchan sillimanite zone rocks originally lay at higher structural levels than presently adjacent cooler kyanite zone rocks to the west. A number of features are believed to coincide with the western margin of the sillimanite zone. These are a maximum in temperature, sharp thermal features, a high strain zone, and a train of metabasites. These features are explained by invoking syn-metamorphic movement between the Buchan sillimanite zone and the kyanite zone to its west, involving some horizontal component of movement. It is suggested that the lateral, now eroded, equivalents of the Buchan area once provided part of the required tectonic thickening for other parts of the Dalradian. Areas surrounding the Buchan area suffered tectonic burial followed by metamorphism during uplift relative to the Buchan area.

Notes: Abstract The upper Jurassic Nikoro greenstone complex of eastern Hokkaido suffered high-pressure intermediate type metamorphism. Characteristic minerals include lawsonite, aragonite, sodic pyroxene of the aegirinejadeite series, winchite. sodic amphibole of the glaucophane-riebeckite series, pumpellyite, epidote and actinolite.High-pressure metamorphism of the Nikoro greenstone complex is related to subduction of the Kula plate toward the Palaeo-Okhotsk Land during Cretaceous time.

Notes: Abstract The Berzosa fault is a major ductile shear zone, the Berzosa Shear Zone (BSZ), which separates the ‘Ollo de Sapo’anticline from the inner higher-grade crystalline axis of the Iberian Hercynian Belt. This shear zone is the site of abundant early kinematic quartz (± Al-silicates) segregations, rich in fluid inclusions. Host rocks are medium-grade staurolite schists and sillimanite gneisses.Fluid inclusions in selected quartz segregations across the Berzosa shear zone have been studied by microthermometric methods as well as, in some instances, by Raman analysis. The recorded fluid inclusion history begins at the end of an intense secondary recrystallization period during late-peak metamorphic conditions and lasts until late in the uplift history of the zone.Three types of inclusions have been found, which in a time sequence are: CO2± H2O; H2O+salt (B-type); and, N2+CH4. Three types of B inclusion may be distinguished in turn, depending on whether they were trapped during an earlier dynamic-recovery phase (B1-type), formed later as intergranular trails (B2-type), or were trapped apparently along with N2+CH4 in clusions from a heterogeneous fluid (B3-type).Considerations from isochores confirm that CO2± H2O inclusions were trapped during late-peak and high-T retrograde metamorphic conditions (in the range 650–500°C and 5–2 kbar), whilst N2+CH4 inclusions, along with the B3-type of inclusions, formed at low-pressures (〈1 kbar) and temperatures (± 300°C). B2-type inclusions were trapped chronologically between these two in a period in which strong inverse lateral thermal gradients developed in the zone. Inferred P-T paths for the area are convex to the T-axis.

Notes: Abstract The orthopyroxene-clinopyroxene, garnet-orthopyroxene and garnet-clinopyroxene geothermometers, and the garnet-orthopyroxene-plagioclase, garnet-clinopyroxene-plagioclase and anorthite-ferrosilite-grossular-almandine-quartz geobarometers are applied to metabasites and the garnetplagioclase-sillimanite-quartz geobarometer is applied to a metapelite from the Proterozoic Arendal granulite terrain, Bamble sector, Norway. P–T conditions of metamorphism were 7.3 ± 0.5 kbar and 800 ± 60°C.This terrain shows a regional gradation from the amphibolite facies, into normal LILE content granulite facies rocks and finally strongly LILE deficient granulite facies gneisses. Neither P nor T vary significantly across the entire transition zone. The change in ‘grade’parallels the increasing dominance of CO2 over H2O in the fluid phase.LILE-depletion is not a pre-condition of granulite facies metamorphism: granulites may have either ‘depleted’or ‘normal’chemistries. The results presented herein show that LILE-deficiency in granulite facies orthogneisses is not necessarily related to variations in either P or T. The important mechanisms in the Arendal terrain were (a) direct synmetamorphic crystallization from magma, with primary LILE-poor mineralogies imposed by the prevailing fluid regime, and (b) metamorphic depletion, involving scavenging of LILEs during flushing by mantle-derived CO2-rich fluids. The latter process is constrained by U–Pb and Rb–Sr isotopic work to have occurred no later than 50 Ma after intrusion of the acid-intermediate gneisses, and was probably associated with contemporary basic magmatism in a tectonic environment similar to a present day cordilleran continental margin.

Notes: Abstract Peridotite and infolded marble of the Seiad ultramafic complex were recrystallized in the upper amphibolite facies as part of the regional progressive metamorphism of the Rattlesnake Creek terrane. Field relations, including the occurrence of metarodingites, and metasomatic zones between dissimilar rock types, demonstrate that the metasediments and serpentinized ultramafic rocks were juxtaposed prior to regional, barrovian metamorphism. Temperatures are estimated to have reached 760–800°C at pressures of 7–8 kbar during the peak of metamorphism. Four low-variance parageneses have been identified within a small (3 km2) area of the complex, which may reasonably be assumed to have formed under the same P and T conditions. Isobaric T-Xco2 diagrams of appropriate equilibria are presented for three different internally consistent sets of thermodynamic data. Despite the seemingly small numerical differences between the standard state thermodynamic properties of the data sets, only one diagram allows the four observed assemblages to coexist within a reasonable temperature range. All three phase diagrams require differences in fluid composition on the scale of a thin section; strong evidence for effective control of pore fluid composition by local mineral reactions during metamorphism.

Notes: Abstract Chromian omphacite which contains up to 4 wt % Cr2O3 has been identified from low-grade metamorphic rocks in Nishisonogi, Kyushu, Japan. It occurs as aggregates, forming a thin horizon ([20 mm thick) in alayered metagabbro within a serpentinite melange zone, together with Cr-free omphacite, actino-lite, epidote and sphene. It may have been formed by the metasomatic introduction of Cr into the metagabbro from the serpentinite rather than by reaction with chromite. The structural formula, based on EPMA analyses, and the optical absorption spectrum of the chromian omphacite show that the Cr is positioned in the octahedral site.

Notes: Abstract A diagenctic through anchizone to epizone transition is demonstrated in pelitic rocks of the Lower Palaeozoic marginal basin of Wales by examination of variations in phyllo-silicate mineralogy, illite crystallinity and bo parameter of white micas. This transition represents a temperature range from ∼ 150°C to ∼ 400°C and the metamorphism is of a low-pressure facies series type, with a geothermal gradient of ∼ 40°Ckm-1. Variations in grade can be correlated largely with the original basin and shelf form, suggesting a depth-related metamorphism. However, in areas closer to the site of Caledonian plate collision an increasingly syn-tectonic metamorphic event is apparent.Correlation of pelite data with metabasite assemblages is variable, the most consistent relationship being between epizone crystallinity values andepidote-actinolite (greenschist facies) assemblages. Diagenetic clay mineral assemblages are found associated with prehnite-pumpellyite assemblages in metabasites and it is suggested that the latter represent non-buffered, and therefore non-diagnostic, assemblages.

Notes: Abstract Existing geochronological data are reviewed and new Rb-Sr, K-Ar and 39Ar–40Ar ages are presented, including a suite of 33 mica ages from a 20 km north–south tunnel section. These data are discussed in relation to the thermal history from the overthrusting of the Autroalpine nappes c. 65 Myr ago to the present. The earliest phase of metamorphism, involving lawsonite crystallization, is associated with emplacement of these nappes. Subsequently, temperatures in the rocks beneath rose, at a mean rate of 3–6°C/Myr, until the climax of metamorphism.At high structural levels, published data indicate an age 〉 35 Myr for the metamorphic climax. In contrast, a new 39Ar–40Ar step-heating age of 23.8 ± 0.8 Myr on amphibole, from near the base of Peripheral Schieferhülle, closely approximates the age of metamorphism and provides the first clear indication that the climax of metamorphism occurred later at deeper structure levels. Following the climax, near-isothermal uplift and erosion reduced pressure to c. 1 kbar before white mica closure at 19 Myr; this implies uplift at 〉3 mm/yr.Along the tunnel section, white mica K-Ar ages vary systematically from 24 Myr to 16.5 Myr with position relative to a late 4 km amplitude dome whereas biotite Rb-Sr ages are uniform at 16.5 Myr across the whole profile; doming is thus dated at 16.5 Myr with transient uplift rates 〉5 mm/yr. At other times uplift rates were 〈1 mm/yr.

Notes: Abstract Granulites at Fyfe Hills in Enderby Land, Antarctica, crystallized at temperatures in excess of 850°C, and possibly as high as 1000°C, and at pressures of 8-10kbar during the mid to late Archaean. A number of features, including repeated retrograde metamorphism at 5.5-8kbar, retrograde reaction textures, and rimward zoning in pressure sensitive systems, suggest that following peak metamorphism the granulites stabilized at a depth of 18-26 km. After stabilization, the granulites cooled near-isobarically to temperatures of 600-700°C. Assuming a total crustal thickness of 35-40 km during this late Archaean interval of isobaric cooling, the peak metamorphic crustal thickness is estimated at 35-56 km. This estimate is significantly less than the 60-70 km obtained by summing the depths of the present levels of exposure (26-34 km) and the thickness of the crust presently beneath Fyfe Hills (approxi-mately 35km) and is, therefore, consistent with independent evidence for extensive post-Archaean thickening of the Enderby Land crust.

Notes: Abstract A Hercynian charnockite occurs within high-grade gneisses in the Agly Massif, French Pyrenees. Its thermal history has been evaluated using the Fe-Mg distribution coefticient (KD) between garnet and biotite. These minerals have different origins but similar compositions in the charnockites and host gneisses. In the charnockite, the Bi–Ga pairs are the retrograde products of Opx alteration. This Opx reaction with feldspar can be written. Opx + PI + Fluid 1(H2O + Al + K + Fe + Ti) = Bi + Ga + Q + Fluid 2(H2O + Na). The garnets are relatively Ca poor (4–2.5% grossular); they are automorphic and zoned in the gneisses and poikiloblastic in the charnockites. Both types show a retrograde rim (of few hundred microns’width) across which Fe and Mn increase as Mg decreases. The biotites show a good correlation between the octahedral cations (Ti4++ Fe2+) and (Mg2++ Al3+VI); Ti and Fe both increase, whereas Mg and AlVI decrease. There is an inverse linear correlation between Fe2+ and Mg2+ and the Fe/Mg ratio increases as Ti increases. The relation between Ti and KGa-BiDFe-Mg is less clear: it seems that KD slightly decreases as Ti increases. The equilibration temperatures of Ga–Bi pairs are discussed: the charnockite Ga-Bi pairs have equilibrated between 550°C and 600°C; whereas those of the gneisses have equilibrated between 550°C and 650°C. Two main thermal steps appear: one in the gneisses between 600-650°C and a second one in both the gneisses and the charnockites between 550°C and 600°C.

Notes: All along the Himalayan chain an axis of crystalline rocks has been preserved, made of the Higher Himalaya crystalline and the crystalline nappes of the Lesser Himalaya. The salient points of the metamorphism, as deduced from data collected in central Himalaya (central Nepal and Kumaun), are:〈list xml:id="l1" style="custom"〉1The Higher Himalaya crystalline, also called the Tibetan Slab, displays a polymetamorphic history with a first stage of Barrovian type overprinted by a lower pressure and/or higher temperature type metamorphism. The metamorphism is due to quick and quasi-adiabatic uplift of the Tibetan Slab by transport along an MCT ramp, accompanied by thermal refraction effects in the contact zone between the gneisses and their sedimentary cover. The resulting metamorphic pattern is an apparent (diachronic) inverse zonation, with the sillimanite zone above the kyanite zone.2Conversely, the famous inverted zonation of the Lesser Himalaya is basically a primary pattern, acquired during a one-stage prograde metamorphism. Its origin must be related to the thrusting along the MCT, with heat supplied from the overlying hot Tibetan Slab, as shown by synmetamorphic microstructures and the close geometrical relationships between the metamorphic isograds and the thrust.3Thermal equilibrium is reached between units above and below the MCT. Far behind the thrust tip there is good agreement between the maximum temperature attained in the hanging wall and the temperature of the Tibetan Slab during the second metamorphic stage; but closer to the MCT front, the thermal accordance between both sides of the thrust is due to a retrogressive metamorphic episode in the basal part of the Tibetan Slab.

Notes: South of the Main Mantle Thrust in north Pakistan, rocks of the northern edge of the Indian plate were deformed and metamorphosed during the main southward thrusting phase of the Himalayan orogeny. In the Hazara region, between the Indus and Kaghan Valleys, metamorphic grade increases northwards from chlorite zone to sillimanite zone rocks in a typically Barrovian sequence. Metamorphism was largely synchronous with early phases of the deformation. The metamorphic rocks were subsequently imbricated by late north-dipping thrusts, each with higher grade rocks in the hanging wall than in the footwall, such that the metamorphic profile shows an overall tectonic inversion. The rocks of the Hazara region form one of a number of internally imbricated metamorphic blocks stacked, after the metamorphic peak, on top of each other during the late thrusting. This imbrication and stacking represents an early period of post-Himalayan uplift.

Notes: Crustal thickening along the northern margin of the Indian plate, following the 50 Ma collision along the Indus Suture Zone in Ladakh, caused widespread high-temperature, medium-pressure Barrovian facies series metamorphism and anatexis. In the Zanskar Himalaya metamorphic isograds are inverted and structurally telescoped along the Main Central Thrust (MCT) Zone at the base of the High Himalayan slab. Along the Zanskar valley at the top of the slab, isograds are the right way-up and are also telescoped along northeast-dipping normal faults of the Zanskar Shear Zone (ZSZ), which are related to culmination collapse behind the Miocene Himalayan thrust front. Between the MCT and the ZSZ a metamorphic-anatectic core within sillimanite grade rocks contains abundant leucogranite-granite crustal melts of probable Himalayan age. A thermal model based on a crustal-scale cross-section across the Zanskar Himalaya suggests that M1 isograds, developed during early Himalayan Barrovian metamorphism, were overprinted during high-grade MCT-related anatexis and folded around a large-scale recumbent fold developed in the hanging wall of the MCT.

Notes: Abstract In the contact metamorphic aureole of the Tinaroo Batholith (north Queensland, Australia), mylonitic rocks were metamorphosed during a regional folding/crenulation event (D2) synchronous with the emplacement of muscovite-bearing granitoids. Prismatic and skeletal andalusite porphyoblasts grew in carbonaceous schists, mainly from the dissolution of staurolite. Muscovite, quartz and biotite played a dual role in this reaction, acting in a catalytic capacity as well as reactants or products. Staurolite was replaced by coarse-grained muscovite ± biotite, whereas andalusite locally replaced quartz ± muscovite ± biotite, with diffusion of H, Al, Si, Mg, Fe and K ionic species linking sites of dissolution and growth.Graphite contributed to the reaction mechanism in a number of ways. Accumulations of graphite in front of advancing andalusite crystal faces led to skeletal growth and the formation of chiastolite structure, where incremental growth occurred on adjacent {110} faces, with subsequent filling in and inclusion of graphite along the diagonal zones. The presence of graphite in some layers in the schist matrix prevented recrystallization of strained muscovite grains. The muscovite grains in these layers, in contrast to adjacent thin non-graphitic layers, were preferentially replaced by quartz. This resulted in muscovite-depletion haloes in graphitic layers around andalusite porphyroblasts. Somewhat arcuate zones of graphite, concentrated during dissolution of quartz along a crenulation cleavage, occur on some andalusite faces. Reactivation of the mylonitic foliation during the formation of D2 crenulations led to a preferential dissolution of quartz in zones of progressive shearing localized near andalusite porphyroblasts and hence the accumulation of graphite.Lack of deflection of the pre-existing mylonitic foliation and anastomosing of the axial planes of D2 crenulations around andalusite porphyroblasts demonstrate not only the timing of growth, but also that growing porphyroblasts do not push aside existing foliations.

Notes: THE YOUNG EARTH: AN INTRODUCTION TO ARCHAEAN GEOLOGY. By E.G. Nisbet. Allen and Unwin, Boston, 1987. pp. 402.

Notes: Abstract Mica porphyroblasts in schists from several regions show nearly planar inclusion trails that are parallel over areas much larger than the wavelengths of later folds. This indicates that the porphyroblasts have not rotated, with respect to geographical co-ordinates, during deformation. Instead, the matrix has rotated, as suggested by Ramsay (1962). Even in zones of marked shortening in the matrix adjacent to large rigid porphyroblasts (e.g. of cordierite or staurolite), small biotite porphyroblasts have not rotated, but have become thinned by solution, as indicated by parallelism of inclusion trails in separate biotite grains and by evidence of truncation of inclusion trails by the matrix foliation. Less common are biotite porphyroblasts that have single asymmetrical microfolds in the matrix adjacent to the porphyroblasts and so appear to have rotated; these porphyroblasts are characterized by kinking.

Notes: Abstract Two major problems which exist in the use of illite crystallinity to define low-grade metamorphic zones are the variety of values chosen for the zone boundaries and the persistent use of three different indices of crystallinity. Although measurement techniques, which cause much of the interlaboratory variation, can be standardized, it is shown that there is, nevertheless, significant additional variation which demands calibration on standards. The greatest variations are due to choices of different absolute values of crystallinity to define zone boundaries. The problem of relating measurements between different indices is approached by fitting mathematical relationships to pairs of measurements from the same sample. A power–law relationship is a satisfactory fit to the Kubler–Weaver and Weaver–Weber pairs, while the Kubler–Weber indices are linearly related. These relationships are used to transform definitions of the diagenetic zone, anchizone and epizone from one index to the others, although they apply strictly only to the data set from which they are derived. This results in compatibility between the three zones and shows that previous definitions to the anchizone in different indices have been chosen at incompatible values. The boundaries of Kubler's anchizone (0.42 and 0.25 Δ2θ) are 0.4 and 0.215 Δ2θ in this study, which become 5.1 and 14.6 in the Weaver index and 278 and 149 in the Weber index. An error analysis shows that percentage errors in both Kubler and Weaver indices increase with crystallinity; the Kubler measurements are marginally preferred at all grades.

Notes: Abstract Migmatites in the Quetico Metasedimentary Belt contain two types of leucosome: (1) Layer-parallel leucosomes that grew during deformation and prograde metamorphism. These are enriched in SiO2, Sr, and Eu, but depleted in TiO2, Fe2O3, MgO, Cs, Rb, REE, Sc, Th, Zr, and Hf relative to the Quetico metasediments. (2) Discordant leucosomes that formed after the regional folding events when metamorphic temperatures were at their peak. These are enriched in Rb, Ba, Sr and Eu, but display a wide range of LREE, Th, Zr, and Hf contents relative to the Quetico metasediments.Layer-parallel leucosomes formed by a subsolidus process termed tectonic segregation. This stress-induced mass transfer process began when the Quetico sediments were deformed during burial, and continued whilst the rocks were both stressed and heterogeneous. Subsolidus leucosome compositions are consistent with the mobilization of quartz and feldspar from the host rocks by pressure solution. The discordant leucosomes formed by partial melting of the Quetico metasediments, possibly during uplift of the belt. The range of composition displayed by the anatectic leucosomes arises from crystal fractionation during leucosome emplacement. Some anatectic leucosomes preserve primary melt compositions and have smooth REE patterns, but those with negative Eu anomalies represent fractionated melts, and others with positive Eu anomalies represent accumulations of feldspar plus trapped melt.

Notes: Abstract The effects of varying amounts of partial melt on the deformation of granitic aggregates have been tested experimentally at conditions (900°C, 1500 MPa, 10-4 to 10-6/s) where melt-free samples deform by dislocation creep, with microstructures approximately equivalent to those of upper greenschist facies. Experiments were performed on samples of various grain sizes, including an aplite (150 μm) and sintered aggregates of quartz-albitemicrocline (10–50 and 2–10 μm). Water was added to the samples to obtain various amounts of melt (1–15% in the aplite, 1–5% in the sintered aggregates). Optical and TEM observations of the melt distribution in hydrostatically annealed samples show that the melt in the sintered aggregates is homogeneously distributed along an interconnected network of triple junction channels, while the melt in the aplites is inhomogeneously distributed.The effect of partial melt on deformation depends an melt amount and distribution, grain size and strain rate. For samples deformed with ˜ 1% melt, all grain sizes exhibit microstructures indicative of dislocation creep. For samples deformed with 3–5% melt, the 150 μm and 10–50 μm grain size samples also exhibit dislocation creep microstructures, but the 2–10 μm grain size samples exhibit abundant TEM-scale evidence of dissolution-precipitation and little evidence of dislocation activity, suggesting a switch in deformation mechanism to predominantly melt-enhanced diffusion creep. At natural strain rates melt-enhanced diffusion creep would predominate at larger grain sizes, although probably not for most coarse-grained granites.The effects of melt percentage and strain rate have been studied for the 150 μm aplites. For samples with ˜ 5 and 10% melt, deformation at 10–6/s squeezes excess melt out of the central compressed region allowing predominantly dislocation creep. Conversely, deformation at 10-5/s produces considerable cataclasis presumably because the excess melt cannot flow laterally fast enough and a high pore fluid pressure results. For samples with 15% melt, deformation at both strain rates produces cataclasis, presumably because the inhomogeneous melt distribution resulted in regions of decoupled grains, which would produce high stress concentrations at point contacts. At natural strain rates there should be little or no cataclasis if an equilibrium melt texture exists and if the melt can flow as fast as the imposed strain rate. However, if the melt is confined and cannot migrate, a high pore fluid pressure should promote brittle deformation.

Notes: Abstract Crystal-chemical relationships between coexisting sodic and calcic amphiboles have been studied in eclogitic metagabbros from the Aosta Valley, Western Alps. Textural analysis gives evidence of three successive high-pressure parageneses:1. Pre-kinematic high-grade blueschist assemblages, preserved as polymineralic inclusions in garnet cores and made of glaucophane and actinolite (stage A).2. Synkinematic eclogite assemblages, composed of garnet + omphacite + glaucophane ± actinolite ± white mica ° Clinozoisite + quartz + rutile (stage B).3. Post-kinematic epitactic overgrowths of barroisitic amphibole on glaucophane and actinolite (stage C). P–T conditions of the eclogitic metamorphism have been estimated at around 500–550°C, 16 kbar.Glaucophane and actinolite coexist as discrete grains in stage A and B assemblages. This texture and the chemistry of the amphiboles unambiguously denotes the existence of a miscibility gap between sodic and calcic amphiboles (from NaM4= 0.80 in actinolite to NaM4= 1.70 in glaucophane at T= 500–550°C). A comparison with published analyses allows a new solvus along the glaucophane–actinolite join to be drawn.The later barroisitic amphibole (stage C) exhibits strong chemical zonation indicating disequilibrium growth. This amphibole cannot either be used to define a miscibility gap with glaucophane or actinolite or be considered as an intermediate stage between these two end-members.

Notes: Abstract Garnet granulites from Sri Lanka preserve textural and chemical evidence for prograde equilibration at temperatures of at least 700–750°C and pressures in the vicinity of 6–8 kbar. Associated strain patterns suggest prograde metamorphism occurred during and immediately following an episode of crustal thickening, with the prograde P–T conditions probably reflecting a combination of the conductive and advective transport of heat at the mid-levels of tectonically thickened crust. The occurrence of prograde wollastonite provides evidence for internally buffered fluid compositions, or fluid absent conditions, during peak metamorphism and precludes pervasive advection of a CO2-rich fluid. The advective heat component is therefore likely to have been provided by the transport of silicate melt. Intricate symplectitic textures record partial re-equilibration of the garnet granulites to lower pressures (˜ 4–6 kbar) at high temperatures (600–750°C), and testify either to the erosional denudation of the overthick crust prior to significant cooling (i.e. quasi-isothermal decompression) or to a subsequent static heating possibly of early Palaeozoic age (Pan-African). The metamorphic history of the Sri Lankan granulites is compared with high grade terrains in the neighbouring fragments of Gondwana, with the emphasis on similarities with Proterozoic granulites of the East Antarctic craton.

Notes: TECTONIC SETTINGS OF REGIONAL METAMORPHISM. Edited by E.R. Oxburgh, B.W.D. Yardley and P.C. England. Royal Society of London. 1987.

Notes: Abstract This paper provides methods and a description of a Pascal computer program, thermocalc, for various thermodynamic calculations using the thermodynamic dataset presented in earlier papers in this series (Holland & Powell, 1985; Powell & Holland, 1985). The dataset involves uncertainties on the thermodynamic parameters and therefore allows uncertainties to be calculated on results, for example in geothermometry and geobarometry. Recommendations are made for the uncertainties on activities to be used in calculations on rocks, particular emphasis being placed on preventing underestimates of these uncertainties at small mole fractions. Apposite examples of phase diagram and rock calculations are presented with ouput from thermocalc, demonstrating the utility of the program. Of the rock calculations, the most valuable are considered to be those involving simultaneous combination ‘least squares’of calculated conditions for a set of reactions applicable to a rock. This set of reactions involves the independent reactions which can be written between the end-members in the minerals in a rock and in the thermodynamic dataset. In contrast to an approach based on specific geothermometers and geobarometers, this approach maximizes the benefit of having an internally consistent thermodynamic dataset. thermocalc is available in IBM PC and Mac versions, from Roger Powell for A$25 or Tim Holland for £10 per version.

Notes: Abstract An inverted metamorphic gradient associated with the northern mylonite zone of the Cheyenne belt, a deeply eroded Precambrian suture in southern Wyoming, has been documented within metasedimentary rocks of the Early Proterozoic Snowy Pass Supergroup. Metamorphic grade in the steeply dipping supracrustal sequence increases from the chlorite through the biotite, garnet, and staurolite zones both stratigraphically and structurally upward toward the northern mylonite zone. A minimum temperature increase of approximately 100° C over a km-wide zone is required for this transition. Parallelism of inverted isograds with the trace of the northern mylonite zone implies a genetic relationship between deformation associated with that zone and the inverted metamorphic gradient within the Snowy Pass Supergroup.Field evidence together with microstructural and petrofabric analysis indicate northward thrusting of amphibolite-grade rocks over rocks of the Snowy Pass Supergroup along the northern mylonite zone. Mineral equilibria and garnet-biotite geothermometry on synkinematic mineral assemblages within the Snowy Pass metasedimentary rocks indicate deformation at minimum temperatures of 480° C and pressures of 350–400 MPa (3°5–4°0 kbar). This implies tectonic burial or upper plate thickness of 13–15 km.The narrow character of metamorphic zonation and microtextures within the Snowy Pass Supergroup which indicate late synkine-matic growth of garnet and staurolite, preclude rotation of pre-existing isograds by folding as a mechanism for development of the inverted gradient. Conductive transport of heat from the upper into the lower plate across the originally low-angle thrust is insufficient to produce the necessary temperatures in the lower plate. Shear heating is considered insufficient to produce the observed metamorphic transition unless high shear stresses are postulated. Up-dip advection of metamorphic fluids is a feasible, but unproven, mechanism for heat transport. The possibility that rapid uplift due to stacking of several thrust sheets may have played a role in preserving the inverted metamorphic gradient cannot be evaluated at present.

Notes: Abstract Partial melting of tonalitic gneisses in the 2.7 Ga Badcallian granulite facies metamorphic episode in the Scourian complex of north-west Scotland produced a suite of granitic to trondhjemitic liquids. On cooling and excavation of the complex, these melts underwent fractional crystallization and the residual liquids eventually became water saturated. Comparison with experimental data suggests that water saturation would have occurred in these melts at around 620–700°C. From the retrograde P–T-time path followed by the complex it is estimated that H2O-dominated fluids were exsolved from these melts at c. 2.5 Ga. It is proposed that these fluids were the cause of the 2.5 Ga Inverian retrogression of the Scourian complex and that water-saturated melts formed during the crystallization of the leucogneisses were intruded as a suite of pegmatites. The timing of pegmatite intrusion is consistent with this proposition as are the temperature estimates, timing, distribution and nature of the Inverian phase of metamorphism. It is likely that the crystallization of melts is an important process in bringing about hydrous retrogressive metamorphic episodes in a number of other basement terrains, such as West Greenland and Australia.

Notes: Abstract The Cretaceous-Eocene basic to intermediate marine volcanic rocks of the Mucuchi Formation constitute the Western Cordillera in northern Ecuador. Their chemical features mostly correspond to those of tholeiitic basalts with some calc-alkaline affinities and suggest an oceanic island arc setting. The Macuchi rocks are affected by low-grade, non-deformative metamorphism, characterized by zeolite, prehnite-pumpellyite and lower greenschist facies assemblages. Depth-zonation is suggested by the downward mineral sequence: (i) laumontite+ (pistacitic epidote, pumpellyite + prehnite); (ii) pumpellyite+ prehnite + pistacitic epidote; (iii) actinolite+biotite+ pistacitic epidote + chlorite. This broad zonation and the chemistry of individual minerals point to an interaction between the volcanic rocks and sea-water under a moderate to high thermal gradient (= 75° C/km?). Alteration appears to have been dependent primarily on fluid control (volume, pressure, composition), temperature and reaction kinetics which together partly overshadow the role of load-pressure. Compositional variations of a mineral species at the scale of a contiguous flow or even at the scale of a thin section show that intensity of alteration was spatially uneven depending on rock permeability and consequently, metastable equilibrium commonly exists. However, a progressive approximation to equilibrium as a result of P–T control is shown by the mineralogy. A high fo2 of the fluid phase is evident from the mineral chemistry. The metamorphism of the Macuchi volcanics is similar to the hydrothermal-burial type produced during the development of a volcanic arc where lavas and volcanoclastics accumulated in a shallow marine environment. However, some of its characteristics point to a transition toward systems defined by a higher T/P ratio such as those found in ocean-floor metamorphism.A model is proposed in which the Macuchi volcanics are assigned to an oceanic island arc generated contemporaneously with a marginal basin which has opened as the outcome of progressive north-south attenuation of the continental crust due to mantle diapirism.

Notes: Abstract Partitioning of Fe and Mg between garnet and phengitic muscovite was calibrated as a geothermometer by Green & Hellman (1982) using experimental data at 25–30 kbar. When the thermometer is applied to pelites regionally metamorphosed at pressures of between 3 and 7 kbar it yields temperatures much higher than those from the garnet–biotite thermometer. A new empirical calibration is proposed for use with such rocks, with particular application where garnet occurs at lower grades than biotite. The new calibration is where K is given by: In K= In Kd and Xii are mole fractions in the garnets.The calibration was derived from comparison with the garnet–biotite thermometer of Ferry & Spear (1978), assuming no pressure-dependence for the partitioning between garnet and muscovite, no ferric iron partitioning, ideal mixing in muscovite, and the garnet mixing model of Ganguly & Saxena (1984) modified for a non-linear Ca effect. This latter garnet mixing model was selected because it gave the geologically most reasonable results. It has not proved possible to distinguish a pressure effect from a ferric-iron effect.Despite the simplifying assumptions used to derive the calibration, it yields temperatures generally within 15°C of those given by the garnet–biotite thermometer, and has been used to supply thermometric data in a low-grade region of the Canadian Rockies.

Notes: Abstract Mineral assemblages in different samples of amphibolite facies pelitic schists collected from two separate outcrops in the Moosilauke area, NH, record differences in the chemical potential of water during metamorphism. Mineralogical, petrological, and field relations indicate that mineral assemblages at both outcrops equilibrated at 520°C and 3.5–4.0 kbar. Thermodynamic analysis of the mineral assemblages demonstrates that maximum chemical potential differences at each outcrop were of the order of 150 calories, over distances of 10–20 m.The differences in the chemical potential of water recorded in both bed-to-bed and outcrop-to-outcrop relations are consistent with the following conclusions: (1) mineral assemblages on a specific outcrop did not equilibrate with an external reservoir of fluid of fixed composition, (2) the relatively small magnitude of the chemical potential differences suggests little or no infiltration of externally derived fluid, (3) these differences on the outcrop scale are probably related to initial compositional variations and the buffer capacity of the mineral assemblage, and (4) the different values of the chemical potential of water exhibited by the various mineral assemblages permits an understanding of the effects of variable μH2O for amphibolite facies pelitic schists.

Notes: Abstract A detailed study of garnet–chloritoid micaschists fom the Sesia zone (Western Alps) is used to constrain phase relations in high pressure (HP) metapelitic rocks. In addition to quartz, phengite, paragonite and rutile, the micaschists display two distinct parageneses, namely garnet + chloritoid + chlorite and garnet + chloritoid + kyanite. Talc has never been observed. Garnet and chloritoid are more magnesian when chlorite is present instead of kyanite. The distinction of the two equilibria results from different bulk rock chemistries, not from P–T conditions or redox state. Estimated P–T conditions for the eclogitic metamorphism are 550–600°C, 15–18 kbar.The presence of primary chlorite in association with garnet and chloritoid leads us to construct two possible AFM topologies for the Sesia metapelites. The paper describes a KFMASH multisystem for HP pelitic rocks, which extends the grid of Harte & Hudson (1979) towards higher pressures and adds the phase talc. Observed parageneses in HP metapelites are consistent with predicted phase relations. Critical associations are Gt–Ctd–Chl and Gt–Ctd–Ky at relatively low temperatures and Gl–Chl–Ky and Gt–Tc–Ky at relatively high temperatures.

Notes: Abstract Low-pressure prograde metamorphism of pelitic rocks in the Cooma Complex, south-east Australia, has produced cordierite-andalusite schists at intermediate grades. The first foliation (S1) is preserved largely as inclusion trails in cordierite porphyroblasts. Microstructural evidence indicates that the cordierite porphyroblasts grew during the early stages of development of a crenulation-foliation (S2) and that andalusite porphyroblasts grew during the development of a later crenulation-foliation (S3). Microstructural evidence also indicates that the andalusite was a product of the prograde reaction: cordierite + muscovite ± andalusite + biotite + quartz. The occurrence of the products of this reaction in ‘beard’structures between cordierite microboudins formed by extension in S3 confirms that the andalusite grew during the development of S3. The investigation shows that porphyroblast-matrix relationships can preserve the orientation of an early S-surface that has been largely obliterated from the matrix, as well as providing relatively direct evidence of sequential mineral growth and metamorphic reactions.

Notes: Abstract Several small bodies of metabasite (maximum dimensions of 1000 m x 500 m) are included in the metamorphic rocks of the Nevado-Filabride Complex in the Betic Cordilleras (Almeria Region). The body of 400 m x 100 m, located 200 m due west of the Lubrin village, contains troctolitic gabbro with well-preserved igneous textures and mineral compositions, wholly amphibolitized gabbro, garnet-bearing metagabbro eclogite. Along with the textural and mineral changes, sensible and regular geochemical variations can be observed, where the content of MgO decreases from 24% to 11%, while that of CaO and Na2O increases from 7% to 11% and from 2% to 3%, respectively. In addition, the content of some minor elements such as Sr, Y, Nb, Zr and Sc increases while that of Ni and Cr decreases from troctolitic gabbro to the eclogite. The amphibolitized gabbro shows values scattered around those of the troctolitic gabbro. These geochemical variations are ascribed to inherited differences in the pre-metamorphic protolith, i.e. a fractionated gabbro which varies from olivine-rich to clinopyroxene-rich gabbro. Nevertheless, some metasomatism affected the Lubrin body without changing the main chemical trends, as documented by the significantly different 87Sr/86Sr ratios of each rock-type. This points to a metasomatism which involved the introduction of crustal radiogenic strontium. The petrographical and mineral chemical features are interpreted to be the result of syn-metamorphic fluid circulation possibly combined with deformation by shearing. The igneous texture and mineral chemistry have been retained wherever both fluid circulation and shearing were ineffective. On the contrary, where both events were effective, the formation of eclogite occurred. Later, the entire body underwent a retrogressive amphi-bolitic stage under greenschist facies conditions, which was probably responsible for the formation of the amphibolitized gabbro portion and for the retrogression of the eclogite.

Notes: Abstract Scapolite, wollastonite, calcite, diopside, grossular-andradite garnet and sphene occur in calc-silicate rocks in the granulite terrain of the Arunta Block, central Australia. This assemblage buffers the CO2 activity at a low value, so that any coexisting fluid phase must be H2O rich and CO2 poor (Xco2= 0.2-0.3). In contrast, the H2O activity in the surrounding felsic and mafic granulites was low. Thus fluid activities during granulite facies metamorphism were locally buffered in various rock units and fluid flow appears to have been restricted or fluid may have been absent. Late retrograde rims of garnet and garnet-quartz separate phases formed in the high-grade stage. Formation of these rims would have required either an influx of water-rich fluid or a decrease in pressure. Evidence from the surrounding granulites shows that in one locality, the calc-silicate rocks had undergone late isobaric hydration; in another locality, minor uplift had occurred soon after peak P-T conditions. In both, scapolite had partly broken down to plagioclase-calite. A calc silicate rock from the granulite terrain of Enderby Land, Antarctica, contains scapolite, wollastonite, calcite, diopside, quartz and sphene; this assemblage also indicates low CO2 activities. In this rock, wollastonite has broken down to calcite-quartz, to indicate isobaric cooling without influx of hydrous fluid.

Notes: Abstract Chloritoid-bearing metasedimentary rocks occur in close proximity to blueschists and eclogites in the Tertiary high-pressure metamorphic belt of northern New Caledonia. The typical assemblage of chloritoid-bearing rocks in the epidote zone is quartzchlorite-muscovite-garnet-chloritoid. In the omphacite zone, epidote is an additional member of the chloritoid-bearing assemblage. Paragonite is rare, plagioclase was not detected, and rutile and ilmenite are the Fe-Ti oxide phases. Chloritoid-glaucophane is not a common assemblage. Chloritoid-bearing rocks have relatively low (Ca+K+Na)/Al ratios and the chloritoids are relatively Mg-rich with Mg/ (Mg+Fe) up to about 0.4. A comparison of the mineral assemblages and mineral chemistry with experimental and computed phase equilibria suggest an upper temperature limit near 560° C in the omphacite zone and a minimum temperature limit near 450° C at 10 kbar. An empirical garnet-chlorite Fe-Mg exchange thermometer does not yield consistent results for the higher-grade rocks, suggesting Ts ranging from 390 to 535° C in the omphacite zone and 420–465° C in the epidote zone. The distribution coefficient KD= (Fe/Mg)ctd/(Fe/Mg)chl for chloritoid and chlorite ranges from 3.9 to 6.4, values which are lower than those (=10) from lower greenschist facies rocks, but are near those of upper greenschist facies and albite-epidote amphibolite facies.

Notes: Abstract Considering the minerals cordierite (Cd), sapphirine (Sa), hypersthene (Hy), garnet (Ga), spinel (Sp), sillimanite (Si) and corundum (Co) in the system FeO-MgO-Al2O3-SiO2 (FMAS), the stable invariant points are [Co], [Ga], [Cd] and [Sa]. Constraints imposed by experimental data for the system MAS indicate that under low PH2o conditions the invariant points occur at high temperature (〉 900° C) and intermediate pressure (7-10 kbar). This temperature is higher than that commonly advocated for granulite facies metamorphism. In granulites Fe-Mg exchange geothermometers may yield temperatures of 100–150° C below peak metamorphic conditions and evidence for peak temperatures is best preserved by relict high-temperature assemblages and by Al-rich cores in orthopyroxene. Application of the FMAS grid to some well-documented granulite occurrences introduces important constraints on their P-T histories. Rocks of different bulk compositions, occurring in close proximity in the field, may record distinct segments of their P-T paths. This applies particularly to rocks with evidence for reaction in the form of coronas, symplectites and zoned minerals. Consideration of curved reaction boundaries and XMs isopleths may explain apparently contradictory results for the stability of cordierite obtained from low-temperature experiments and thermochemical calculations on the one hand and hightemperature experimental data on the other.

Notes: Abstract The Bergen-Jotun kindred rocks of this study, the Storådalen Complex (SCX), Svartdalen Gneiss (SG) and Mjølkedøla Purple Gabbro (MPG), have been shown to be a co-magmatic series with calc-alkaline affinities. The analyses of Ba, Nb, Y, and Zr presented here show no variation in these elements between the three rock units and are consistent with the calc-alkaline character of the rocks. The lithophile elements Ba, K, and Sr are enriched relative to MORB and the high field strength elements Nb, Y, and Zr are depleted relative to MORB, Zr especially so.The SCX contains rocks with low (〉30) differentiation indices which are interpreted as plagioclase + pyroxene ± olivine ± amphibole cumulates. The remainder of the SCX, together with the MPG and SG, is regarded as the congealed liquid in equilibrium with these cumulates. The distribution of trace elements between these two components of the SCX can be adequately modelled using a Rayleigh fractionation process, measured ‘liquid’compositions, and calculated bulk distribution coefficients. It is thus concluded that the trace element geochemistry of the rocks of this study is consistent with subduction-related, mantle-derived magmas that fractionate within a continental or mature island arc environment. Subsequent high-grade metamorphism and deformation of Sveconorwegian age have been essentially isochemical.

Notes: Abstract High-pressure granulite-facies gneisses in the NE Ox inlier in NW Ireland have undergone extensive Caledonian retrogression. In the local area of Slishwood, however, reworking was negligible and the gneisses (psammites, semipelites, pelites, metabasites and ultramafites) preserve evidence of P–T changes at high grade which mainly post-date pre-Caledonian polyphase deformation. Temperatures reached 850–900°C (based on garnet-clinopyroxene geothermometry and the presence of mesoperthite) during and after decompression from earlier eclogite-facies conditions (inferred from textural evidence of plagioclase release in sieve-textured augite). Subsequent cooling at high pressure is inferred from the unequivocal replacement of sillimanite by kyanite.A Sm–Nd mineral isochron (gt–cpx–plag–WR) of 605 ± 37 Ma is taken to date a point on the cooling path, and confirms the hitherto suspected pre-Caledonian age of the high-grade metamorphism. Geochemical and Sm–Nd isotopic data indicate that the protoliths were probably late Proterozoic arkosic sediments and tholeiites. Following metamorphism they apparently came to reside near the base of the crust where they slowly cooled. The eventual exhumation of these gneisses is attributed to Caledonian crustal imbrication, followed by rapid isostatic recovery.

Notes: Abstract Sphalerite geobarometry has long been known to give poor results when applied to regional metamorphic terranes. Application of the sphalerite geobarometer to three low-to medium-grade sulphide deposits—the Moke Creek and Waitahuna deposits, Otago, and the Goose Cove deposit, Newfoundland—yields pressures up to 9 kbar, which appear to be too high when compared with other geological data. Textural and mineralogical relationships suggest that the Goose Cove and, possibly, the Moke Creek deposits lacked the required equilibrium assemblage (pyrite + hexagonal pyrrhotite + sphalerite) during peak metamorphic conditions, rendering the geobarometer inapplicable. In addition, all three deposits show evidence of re-equilibration at T 〈 300°C, which has resulted in decreased FeS contents and high apparent pressures. Analyses of sphalerites from very low-grade metachert from South Georgia Island, which contains the assemblage sphalerite + pyrite + monoclinic pyrrhotite + chalcopyrite, confirm that low-temperature equilibration of this assemblage results in approximately 10–11 mol. % FeS in sphalerite. Comparison of these results with published descriptions of other deposits suggests that lack of the appropriate assemblage and retrograde re-equilibration of sphalerite probably account for most anomalously high-pressure estimates. Erratic compositions of sphalerites containing chalcopyrite inclusions may result from replacement of high-temperature intermediate solid-solution by chalcopyrite during cooling. Strain may enhance retrograde re-equilibration of sphalerite by grain-size reduction or dislocation-assisted diffusion and/or nucleation. Re-evaluation of the data from Moke Creek suggests that the sulphides experienced pervasive greenschist facies re-equilibration at pressures of about 4.5 kbar, with late stage mobilization at about 2.8 kbar, and thus sphalerite compositions are not likely to reflect blueschist facies conditions. Pressure estimates based on sphalerite geobarometry should take into account at what stage in the history of a metamorphic terrane the sphalerite composition equilibrated.

Notes: Abstract The magnitudes of plastic strains of 104 metacherts were determined from the deformed shape of initially spherical radiolarians in the Sambagawa high-P type metamorphic belt of Western Shikoku, Japan. The strain magnitude increases with increasing metamorphic temperature from several per cent to 250%. The a2/a3 ratio of strain ellipsoids in the higher metamorphic grades decreases with increasing metamorphic grade while the a1/a2 ratio increases rapidly. The long axis of the strain ellipsoid for every grade is nearly parallel to the length of the metamorphic belt, suggesting that the flow direction of the synmetamorphic deformation was uniform along the belt. A map of strain zones within the Sambagawa high-P type metamorphic belt reveals that the metamorphic belt underwent a progressive bulk inhomogeneous shear deformation and that the high-grade zones represent a deep-seated boundary shear zone on the accretionary wedge between a subducting oceanic plate and the immobile rigid continental plate.

Notes: Abstract Compositions of actinolite, hornblende and cummingtonite, together with pyroxene and plagioclase, are studied in basic intrusions in the Dalradian of north-east Scotland, and the Glen Scaddle complex in the West Moine. Amphibolitization is due to influx of water from the country rocks. Pyroxene compositions are found to have adjusted to the regional metamorphic environment. Owing to the difficulty of diffusion of Al and Si, calcic amphiboles are zoned and commonly contain quartz blebs. Discontinuities in zoning give rise to actinolite-hornblende pairs. Compared with north-east Scotland, disequilibrium is less strong in the Glen Scaddle area: in the latter, plagioclase compositions have been greatly changed, Na partition between hornblende and plagioclase is close to equilibrium, the maximum Al content of hornblende is lower and zoning patterns are more consistent. The Fe/Mg ratio in calcic amphiboles varies with Al content, while approaching equilibrium partition with other minerals. Both zoning patterns and Fe/Mg partition with cummingtonite suggest that Fe/Mg of the calcic amphiboles increases more strongly with increasing (Alvi+Fe3+) than can be explained simply by substitution of Al,Fe3+ for Mg on M2. Model reactions for amphibole formation are constructed. Cummingtonite formed at lower chemical potential of CaO than actinolite: Ca was exchanged for Mg,Fe between orthopyroxene-derived and clinopyroxene-derived local systems. Both cummingtonite and actinolite were formed because of kinetic constraints, as intermediate reaction products: actinolite-hornblende pairs represent disequilibrium. This work suggests that many occurrences of actinolite with hornblende, where the minerals are zoned, may also be due to diffusion kinetics.

Notes: Abstract Lewisian grey gneisses from Gruinard Bay, North-west Scotland retain mineralogical and geochemical evidence for Scourian horn-blende-granulite facies metamorphism, and they may be used to assess current models of elemental depletion at granulite grade. Their ‘immobile’major and trace element geochemistry is indistinguishable from that of Lewisian amphibolite and pyroxene-granulite facies counterparts. The K, Rb, Th and U contents of the Gruinard Bay gneisses are depleted relative to amphibolite facies gneisses, but generally the abundances of these elements are above those of comparable pyroxene granulites. U and Th have reached an advanced stage of depletion, but allanite appears to be crucial in maintaining significantly higher U and Th abundances at Gruinard Bay than in pyroxene granulites. K and Rb loss is less extreme, and depends on the stability of the rock-forming minerals: K-feldspar; biotite; and, amphibole. Early removal of K and Rb has resulted in a small rise in K/Rb, but further preferential Rb loss would have been required to generate the characteristically high K/Rb ratios of Lewisian pyroxene granulites.The residence of U and Th in the accessory minerals of granulite facies gneisses, which are often correlated with the residua of intracrustal partial melting, renders unlikely their extreme incompatibility required by such models. Even if such phases are ignored, high mineral-melt partition coefficients for silicic melts argue against partial fusion as an efficient depletion mechanism. On the other hand, the advanced stage of U and Th depletion reached in Gruinard Bay gneisses, which were still partly hydrous, severely restricts the role played by CO2-dominated fluids and a hydrous medium is preferred.

Notes: Abstract Oxygen and hydrogen isotope analyses have been made of coexisting quartz, ilmenite, muscovite, and biotite from Late Precambrian metapelitic rocks, staurolite-kyanite to K-feldspar-muscovite-sillimanite zones, from Mica Creek, British Columbia. The δ18O and †D values of these minerals are generally uniform and do not decrease significantly with increasing metamorphic grade. This implies that there has not been significant infiltration of deep crustal, possibly magmatic, fluids into the metapelites that has been suggested for other high-grade metamorphic terranes. The uniformity of oxygen isotope compositions of the Mica Creek metapelite rocks may reflect isotopic uniformity in the sedimentary protolith rather than widespread exchange with an isotopically homogeneous metamorphic pore fluid.Temperature estimates based upon 18O exchange thermometry for samples below the sillimanite zone are in reasonable agreement with the results of garnet-biotite Fe–Mg exchange thermometry. In the higher grade rocks, the oxygen isotope and garnet-biotite thermometry yield results which disagree by about 100°C. The highest temperatures recorded by oxygen isotope thermometry, 595°C, are at least 60°C below the minimum temperatures required by phase equilibria. These discrepancies appear to result from pervasive equilibrium retrograde exchange of oxygen isotopes between coexisting minerals. In addition, there are problems with calibration of garnet-biotite thermometry at higher temperatures. Retrograde oxygen isotope exchange may be a general characteristic of high-grade metamorphic rocks and oxygen isotope thermometry may not usually record peak metamorphic temperatures if they significantly exceed 600°C.

Notes: Abstract Mctamorphic rocks of the St Anthony Complex of north-western Newfoundland are best interpreted in terms of a high-temperature shear zone formed between down-going continental margin rocks and overriding oceanic lithosphere in a subduction zone. High-grade rocks, immediately beneath the oceanic lithosphere peridotite, display retrograde meta-morphism in high-strain zones, whereas lower grade rocks, near the base of the metamorphic complex, display prograde metamorphism in high-strain zones. Mylonite zones in meta-basitcs at all levels in the complex contain the assemblage epidote-hornblende-albite-sodic oligoclase. These observations suggest that the ‘inverted metamorphic gradient’within the St Anthony Complex results from the fortuitous preservation of residual metamorphic assemblages from different crustal levels within an epidote amphibolite facies shear zone. The degree of re-equilibration is strongly dependent on the degree of strain, and is best achieved in synmetamorphic mylonite zones. This interpretation of the St Anthony Complex can be extended to other sub-ophiolite metamorphic sheets, which show very similar relationships. It is proposed that most metamorphic sheets beneath ophiolites are high temperature shear zones, the P-T paths of which preserve records of burial and exhumation in subduction zones.

Notes: Experiments up to water pressures of 21 kbar have been undertaken to bracket the reactions chlorite + quartz = talc + kyanite + H2O, chlorite + quartz = talc + cordierite + H2O, and talc + kyanite + quartz = cordierite ± H2O by reversed runs in the system MgO-Al2O3-SiO2-H2O (MASH). These reaction curves intersect at an invariant point (IP1) at PH2O = 6.4 ± 0.2 kbar and a temperature of 624 ± 4°C. The curve of the chlorite + quartz breakdown to talc + kyanite + H2O at water pressures above 6.4 kbar shows a negative dP/dT, with the slope decreasing with rising pressure, whereas the slope of the breakdown curve to talc + cordierite + H2O at water pressures is clearly positive.The composition of the chlorite solid solution reacting with quartz has been estimated to be approximately Mg4.85Al1.15[Al1.15Si2.85O10](OH)8 over the entire pressure range investigated. The composition of the talc solid solution forming by the breakdown of chlorite + quartz appears to be Mg2.94Al0.06[Al0.06Si3.94O10](OH)2 at PH2O = 2kbar. With increasing pressure, the Al content of talc decreases, reaching a value of about 0.06 atoms per formula unit at P,H2O = 21 kbar.As a consequence of the new experimental data, the existing phase topologies of the MASH-system and K2O-MASH-system have been revised. For example, the invariant point IP1 and the univariant reaction curve kyanite + talc + H2O = chlorite + cordierite are stable. For this reason, the development of medium- to high-temperature metamorphic rocks compositionally approximating the MASH-system must be reconsidered. The whiteschists from Sar e Sang, Afghanistan, are treated as an example. The application of the present experimental data to metamorphic rocks of more normal composition requires the examination of the influence of further components. This leads to the conclusion that the introduction of Fe2+ into magnesian chlorite extends its stability field in the presence of quartz by 10°-15°C in comparison with pure Mg-chlorite.

Notes: A reaction producing jadeitic pyroxene in metagreywackes of the northern Diablo Range has been identified on the basis of mineral distribution, isograd patterns and composition of coexisting minerals. The appearance of jadeitic pyroxene (∼Jd80) is closely followed by the disappearance of pumpellyite, which indicates that pumpellyite plays a major role in the pyroxene-producing reaction. A new projection from hematite, lawsonite, chlorite, quartz and H2O on to the NaAlO2-FeO-MgO ternary confirms the role of pumpellyite in pyroxene production and suggests a reaction of the form: 1.00 pumpellyite + 0.31 chlorite + 8.71 albite + 0.70 hematite + 2.00 H2O = 8.54 jadeite + 0.57 glaucophane + 3.09 lawsonite + 5.26 quartz. Metagreywackes of the northern Diablo Range were metamorphosed under conditions of PH2O=Ptotal at 200-300 °C and 7.5-10.0 kbar. Despite the low temperatures attained during metamorphism, the assumption of equilibrium yields results consistent with field observations and phase relations.

Notes: Metabasites and metagreywackes from the Pelona and Rand Schists of southern California were analysed using three different electron microprobes. For all three instruments, the estimated Fe3+ contents of calcic amphibole, chlorite and epidote are positively correlated. For some samples, there is an additional correlation between high estimated Fe3+ and the presence of magnetite. These results imply that microprobe analyses can be used to discern relative differences in Fe3+. However, microprobe data and calculations on the sensitivity of the correction procedures to systematic analytical errors indicate that estimated values of Fe3+ are not significant in an absolute sense. Thus, estimates of Fe3+ are meaningful when comparing samples analysed with a single microprobe, but must be used with caution when comparing analyses obtained on more than one probe.

Notes: All the Mesozoic and Cenozoic volcanic rocks of the Central Andes (from southern Ecuador to central Chile), except Recent ones, have been affected by episodes of regional metamorphism, without change in texture and structure. The metamorphism, which ranges from low zeolite to greenschist facies, can be classified as burial metamorphism because there is an overall increase in metamorphic grade with stratigraphic depth in the individual volcanic sequences separated by regional unconformities. Some sequences display metamorphic patterns transitional to ocean-floor and to geothermal field types, reflecting variations along and across the Andes in tectonic setting and thermal gradients.Volcanism was closely followed by metamorphism during each cycle characterizing the geological history of the Central Andes. The episodic nature of the metamorphism has led to breaks in metamorphic grade at regional unconformities and repetition of facies series, where strata of higher grade may even overlie those of lower grade. The existence of permeability-controlled distribution patterns of secondary minerals within individual flows shows that gradients of chemical activity, rate of reaction and Pfluid were acting, in addition to temperature and P,tot overall gradients, during the regional metamorphism. The alteration is accompanied by chemical changes and disturbances of the K-Ar and Rb-Sr isotope systems. Similarities between Mesozoic facies series in the western and eastern flanks of the Andes are consistent with a mechanism of ensialic spreading-subsidence.

Notes: An analytical study to evaluate quantitatively weak zoning of a garnet from a high-grade kinzigite has been performed with an electron microprobe. The technique consists of the reconstruction of a profile step-by-step by successive analyses performed during relatively long counting times (30 s), along a radial profile of 2,500 μm length. The successive analytical data along this profile are statistically treated by Fisher's test and compared with the χ2 values (Pearson's law). These statistical tests were applied to assess microprobe stability and analysis homogeneity, and as a consequence to assure high credibility of the radial variations of the garnet. From core to rim, and for each element, zoning appears as the radial juxtaposition of stationary Poissonian samples. These samples being associated, the garnet appears to be constituted of successive concentric domains with stationary compositions. Different substitutions between Mg, Fe, Mn and Ca are evidenced. Such an analytical approach to chemical zoning can be useful for understanding growth mechanisms, and the possible diffusion reactions with the environment at each growth step. In addition, such a procedure can be used to evaluate accurately the fluid content of cordierite, and to appreciate the nature of the fluids concerned. As an example, the fluid content of a cordierite from a similar high-grade kinzigite has been evaluated.

Notes: P-T conditions inferred from fluid inclusions in metamorphic rocks often disagree with the values predicted from mineral equilibria calculations. These observations suggest that inclusions formed during early stages of regional metamorphism continue to re-equilibrate during burial and subsequent uplift in response to differential pressure. P-T conditions accompanying burial and uplift were experimentally simulated by initially forming pure H2O inclusions in quartz at elevated temperatures and pressures, and then re-equilibrating the inclusions in the presence of a 20 wt% NaCl solution such that final confining pressures ranged from 5 kbar above to 4 kbar below the initial internal pressure of the inclusions at the temperature of re-equilibration.In all samples re-equilibrated at confining pressures below the internal pressure, some inclusions were formed that had compositions of 20 wt% NaCl and densities in accord with the final P-T conditions. Additionally, some inclusions were observed to contain fluids of intermediate salinities (between 0 and 20 wt% NaCl). Densities of these inclusions were also consistent with formation at the re-equilibration P-T conditions. The remainder of the fluid inclusions observed in these samples contained pure H2O and their homogenization temperatures corresponded to densities intermediate between the initial and final P-T conditions. In short-term experiments (7 days) where the initial internal overpressure exceeded 1 kbar, no inclusions were found that contained the original density and none were found to have totally re-equilibrated. Instead, most H2O inclusions re-equilibrated until their internal pressures were between ∼750 and 1500 bars above the confining pressure, regardless of the initial pressure differential. In a long-term experiment (52 days), inclusions re-equilibrated at a lower confining pressure than the initial internal pressure displayed homogenization temperatures corresponding to a range in final internal pressures between 0 kbar (i.e. total re-equilibration) and 1.2 kbar above the confining pressure.In experiments where the confining pressure during re-equilibration exceeded the initial internal pressure, densities of pure H2O inclusions increased to values intermediate between the initial and final P-T conditions. Additionally, these inclusions were generally surrounded by a three-dimensional halo of smaller inclusions, also of intermediate density, resulting in a texture similar to that previously ascribed to decrepitation from internal overpressure. In extreme cases where confining pressures were 4–5 kbar above the initial pressure, the parent inclusion almost completely closed leaving only the three-dimensional array of small (〈inlineGraphic alt="leqslant R: less-than-or-eq, slant" extraInfo="nonStandardEntity" href="urn:x-wiley:02634929:JMG243:les" location="les.gif"/〉5 μm) inclusions, the outline of which may be several times the volume of the original inclusion. Groups of such inclusions closely resemble textures commonly observed in medium- to high-grade metamorphic rocks.Inclusions containing 10 and 42 wt% NaCl solutions trapped at 600 °c and 3 kbar were re-equilibrated at 600 °c and 1 kbar for 5 days in dry argon to evaluate the importance of H2O diffusion as a mechanism of lowering the inclusion bulk density. Salinities of re-equilibrated inclusions obtained from freezing point depressions and halite dissolution temperatures indicate that original compositions were preserved. Density changes similar to those previously described were noted in these experiments, in inclusions showing no visible microfractures. Therefore, density variations observed in inclusions in this study, re-equilibrated under rapid deformation conditions, are considered to result from a change in the inclusion volume, without significant loss of contents by diffusion or leakage.

Notes: In the main Himalayan range in the Ladakh-Zanskar area, domal structures have been observed at structurally deeper levels in the tectonic unit of the Higher Himalayan Crystalline. Their formation occurred during a second, temperature-dominated phase (M2) of high-grade regional metamorphism, characterized by the semipelitic paragenesis of sillimanite-K-feldspar and incipient anatexis. The doming event reveals a local system of synmetamorphic uplift superimposed on a regional system of northeast-southwest trending compression. In the main Himalayan range the development of the dominant S2 foliation is related to deformation during the doming phase, which started early in the M2 event. The deformation propagated continuously north-east and south-west with time. In the north-east, on the northern slopes of the main Himalayan range, this deformation is expressed by extensional shear movements of the upper tectonic levels finally leading to the late- to postmetamorphic normal fault system of the Zanskar shear zone. Towards the south-west, deformation is expressed by compressional movements, e.g. at the Main Central Thrust (MCT) in the Kishtwar window area. The observed compression and extension is inferred to relate to an increased uplift of the domal bulges of the tectonic Kishtwar window and of the whole main Himalayan range.

Notes: The pressure-temperature and temperature-time paths derived for rocks in the Kohistan arc and adjacent Nanga Parbat-Haramosh massif record the dynamics of the collision between the island arc and the Indian plate. Studies of P-T-t paths show that the Kohistan arc was thrust over the Nanga Parbat-Haramosh massif at least 25 Ma ago, but not more than 30–35 Ma ago. Rocks in the Kohistan arc followed decreasing pressure paths, with the early metamorphism beginning at high pressures (9.5 kbar) and later metamorphism occurring at 8.0 kbar. In contrast, rocks in the Nanga Parbat-Haramosh massif (Indian plate) experienced increasing pressure and temperature paths. Prior to thrusting, the massif was at low pressures (4.0 kbar) and low temperatures (450°c). Later, the pressure and temperature increased to 8 kbar and 580°c. The authors interpret the convergence (to approximately the same pressure and temperature) of the P-T paths in the two terranes as being the result of thrusting and thermal equilibration between the thrust sheets. 40Ar/39Ar cooling ages of hornblendes and other geochronological data suggest that the time of peak metamorphism and hence the completion of thickening was approximately 30–35 Ma ago.Temperature-time paths show that after thrusting, during the period 25–10 Ma, the Kohistan arc and Nanga Parbat-Haramosh massif were uplifted at similar rates (0.5 km Ma). However, in the past 10 Ma the Nanga Parbat-Haramosh massif has been uplifted more rapidly than the adjacent Kohistan arc. Rapid uplift has been accommodated by late faults along the edge of the massif.

Notes: Abstract In the northeastern part of the Grenville Province, along the gulf of St Lawrence, cordierite is widespread in the migmatites of Baie Jacques Cartier (BJC) and Baie des Ha! Ha! (BHH). In the BJC area, rafts of mesosome occur in a pervasive network of leucosome consisting of cordierite-bearing pegmatite. In BHH, however, the mesosome and leucosome are well segregated and locally separated by thin biotite –hornblende melanosomes.Leucosomes in the BJC area record the highest temperatures (oxide thermometry = 900°C), whereas leucosomes of BHH and mesosomes of both areas indicate peak temperatures around 800°C (oxide thermometry; biotite–garnet thermometry with fluorine-rich biotite). Peak pressures were constrained at 720 MPa using the Ilm-Sil–Qtz–Grt–Rt (GRAIL) equilibrium.The area is thought to have undergone extensive melting under relatively modest pressures. The highest temperatures recorded in the BJC area are probably related to a pervasive impregnation of this terrane by aluminous granitic melts.Most post-peak P–T estimates for the mesosomes fall on a nearly isobaric, clockwise, P–T path (0.6 MPa/°C) with the exception of the high-temperature leucosomes of BJC, which fall about 100°C away from this path; this is additional evidence for the external origin of these leucosomes. The ultimate source of heat that generated the migmatites is thus though to be an underlying plutonic complex (anorthosite?).

Notes: Abstract The introduction of externally derived fluids into rocks of the Zermatt–Saas zone of the Swiss Alps gave rise to the simultaneous formation of shear and hydraulic fractures. These fractures are now filled with albite-rich assemblages and surrounded by alteration halos up to c. 2 m wide. The alteration assemblages are zoned and an examination of reactions in P–T–aH2O space implies that the parageneses developed by the hydration of fluid-absent eclogites. A mechanical analysis of the veins (after Sibson, 1981) shows that Pfluid/Pload must have been at least 0.96. Fluid migration into the country rocks must have been driven by excess hydraulic head either derived from the vertical extent of the veins or due to their connection to a deeper, external reservoir, possibly tapped along thrust surface(s). Diffusive and capillary transport were insignificant. The fluids may have been derived from underlying metasediments that were dehydrating during the quasi-isothermal uplift of this part of the Alps, or they may have originated during the prograde mesoalpine metamorphism documented in the area.

Notes: Abstract The Catalina Schist of southern California is a subduction zone metamorphic terrane. It consists of three tectonic units of amphibolite-, high-P greenschist- and blueschist-facies rocks that are structurally juxtaposed across faults, forming an apparent inverted metamorphic gradient. Migmatitic and non-migmatitic metabasite blocks surrounded by a meta-ultramafic matrix comprise the upper part of the Catalina amphibolite unit. Fluid-rock interaction at high-P, high-T conditions caused partial melting of migmatitic blocks, metasomatic exchange between metabasite blocks and ultramafic rocks, infiltration of silica into ultramafic rocks, and loss of an albitic component from nonmigmatitic, clinopyroxene-bearing metabasite blocks.Partial melting took place at an estimated P=˜8–11 kbar and T=˜640–750°C at high H2O activity. The melting reaction probably involved plagioclase + quartz. Trondhjemitic melts were produced and are preserved as leucocratic regions in migmatitic blocks and as pegmatitic dikes that cut ultramafic rocks.The metasomatic and melting processes reflected in these rocks could be analogous to those proposed for fluid and melt transfer of components from a subducting slab to the mantle wedge. Aqueous fluids rather than melts seem to have accomplished the bulk of mass transfer within the mafic and ultramafic complex.

Notes: Abstract Migmatite structures in the Coast Plutonic-Metamorphic Complex are well exposed in the inlet of Boca de Quadra, southeast Alaska. Two types of anatectic migmatites are present. Patch migmatites formed by in situ melting and subsequent crystallization of melt. Diktyonitic migmatites comprise a discontinuous veined network of leucocratic material, in which leucosomes enclose boudins of host rock. The margins of these boudins show the development of both melanosomes and shear band fabrics.Strain analysis of diktyonitic melanosomes indicates that these regions have undergone volume decreases of 20-27%. This volume decrease is attributed to melt extraction into the adjacent fracture-filling leucosomes. Thus, diktyonitic migmatites formed by shear-induced segregation of partial melt, whereas in patch migmatites the lack of shear stresses inhibited melt segregation. The variable structural style of anatectic migmatites in Boca de Quadra is not related to host-rock composition, but may be due to differences in the amount of differential stress during migmatization. These in turn may be controlled by host-rock strength and/or diachroneity of migmatization and deformation.Determination of volume changes during migmatization using strain analysis is potentially capable of discriminating intrusive and anatectic migmatites and consequently of documenting melt segregation and subsequent migration across crustal levels.

Notes: Abstract Chloritoid and pyrophyllite occur together in all major goldfields of the Witwatersrand Basin and are widespread in virtually all rock types of the upper Witwatersrand Supergroup, including metaconglomeratic reefs and altered mafic rocks. Both minerals are particularly characteristic of the pelitic horizons intimately associated with reef packages, but they are also developed locally in the regionally persistent metapelites that have basin-wide extent. Pyrophyllite is particularly common in foliated zones, adjacent to quartz veins, and near unconformably overlying auriferous conglomerates.The wide distribution of chloritoid and pyrophyllite in metapelites of the Witwatersrand Basin is attributed to alteration of chlorite-rich shales, rather than to unusual premetamorphic starting materials. This alteration event involved the redistribution of many elements, with up to 40% volume loss, mainly due to removal of silica. Removal of most of the Mg and some Fe accounts for the stabilization of chloritoid and pyrophyllite. Relatively immobile elements included Al, Ti, Nb, Cr, V, P, La and Ce, whereas Si, Fe, Mn, Zn, Co, Ni, Cu, Mg and Ca were lost, and K, Rb and Ba were introduced by an infiltrating fluid.The alteration event is inferred to have been within the chloritoid and pyrophyllite stability field (and thus syn-metamorphic) as bulk chemical changes in metapelites are from chlorite directly towards chloritoid and then pyrophyllite, rather than to lower grade minerals such as kaolinite. Muscovite–chlorite–chloritoid and muscovite–chloritoid–pyrophyllite assemblages are attributed to fluid buffering along appropriate curves, as their production by metamorphism of lower grade mineral mixes is considered unlikely, based on the present bulk rock compositional data. A metamorphic timing for the alteration accounts for the correlation of strongly foliated areas with greater degrees of inferred alteration. The transitions from chlorite to chloritoid to pyrophyllite define zones of increasing alteration.Widespread infiltration as part of peak metamorphism is suggested by the distribution of chloritoid and pyrophyllite, quartz veining and textures. Fluid:rock ratios calculated from a silica budget in one metapelitic horizon exceed 100:1 over many square kilometres. These values need not imply multi-pass fluid flow, as much of the silica migration may be redistribution on a scale of a few metres, from source rocks into veins. Although infiltration during metamorphism may have affected much of the upper Witwatersrand succession, channelized fluid flow within reef packages, along faults and unconformities and in certain metaconglomerates and metapelites is inferred.

Notes: Abstract Biotite and cordierite occur in a 1-km wide zone of pelitic hornfelses around the McGerrigle pluton. These phases display systematic changes in XFe that can be attributed to continuous reactions involving chlorite or andalusite in the system KFMASH. Through much of the zone biotite and cordierite were products of the ‘breakdown’of chlorite. Close to the pluton this continuous reaction was terminated by a discontinuous reaction that introduced andalusite. Pelites which interdigitate with apophyses of the intrusive at the pluton margin contain assemblages that record a continuous reaction between biotite, cordierite, andalusite, muscovite, and quartz or, alternatively, the discontinuous breakdown of muscovite and quartz to K-feldspar and andalusite.The mole fraction of Fe in biotite and cordierite increased significantly with the progress of the first continuous reaction and apparently decreased during the second continuous reaction. The KD of Fe-Mg between the minerals decreased and apparently increased, respectively, during the two reactions.Biotite-cordierite-chlorite assemblages are interpreted to have been stable at temperatures between 525° C and 615° C and biotite-cordierite-andalusite assemblages stable at temperatures between 615° C and 635° C. The confining pressure was estimated to have been 〈 2 kbar.The results of this study suggest that the KD of Fe-Mg between biotite and cordierite is a function of temperature, the Fe-Mg exchange characteristics of the controlling continuous reaction and non-ideal mixing of Fe and Mg.

Notes: Abstract Layer-parallel (i.e. parallel to foliation or bedding) vein formation in the graywackes and pelites of the Quetico Metasedimentary Belt occurred during synchronous prograde metamorphism and regional (D2) compression. In a traverse across metasediments which change in metamorphic grade from greenschist to upper amphibolite (migmatite) facies, layer-parallel veins show the following trends: (1) an increase in thickness and internal complexity, the latter due to successive boudinage; (2) low-grade veins are parallel to planes of anisotropy due to the original sedimentary fabric of the host rocks, but at higher grades other sites are also used and (3) a systematic increase in plagioclase/quartz ratio in the veins towards higher grade, adjacent mafic selvedges first exhibit quartz depletion then, in the amphibolite facies, plagioclase depletion. Mineralogical zoning is often preserved in a single vein, older parts are more quartz-rich than younger.Mass balance calculations and whole-rock geochemistry based on veins, mafic selvedges and country rock are consistent with a closedsystem subsolidus segregation origin. The layerparallel veins are syntectonic, and migration of the mobile components required to form their mineralogy is a stress-induced mass transfer. The source of these components appears to be dominantly pressure solution of the same minerals in the host rocks, although metamorphic reactions may also have contributed. Veins nucleated first at those sites where initial sedimentary heterogeneites, such as fine-scale graded bedding, provided gradients of normal stress across grain boundaries, and hence of chemical potential, necessary to drive the subsolidus segregation process. The earliest veins are thus parallel to bedding. Later, nucleation of the veins could also occur along more randomly distributed sites within the metasediments, and these veins grew parallel to the schistosity rather than bedding, if the two were distinct. Once formed, the veins themselves, which are more competent than the surrounding rock, provide the stress heterogeneity required for their further growth. The increasing plagioclase/quartz ratio in the veins may be due to a temperature dependent increase in plagioclase component mobility relative to quartz. Alternatively, the increasing transfer distances for silica, resulting from prior quartz depletion in the inner parts of the mafic selvedge, may increase the relative mobility of plagioclase component.

Notes: Abstract Gneisses from the southern part of the Bunte Series have been studied in order to determine their metamorphic evolution. They all belong to the paragenetic facies type Bt+Sil+ Kfs+Qtz+Grt. The garnets of these rocks generally exhibit typical features of garnets from this high-temperature facies type: diffusional homogenization throughout the bulk of the garnet and retrograde zoning patterns at the outer rim. Ca- and Mn-richer relict cores in some garnets are evidence of the early metamorphism. These cores are enveloped by the high-temperature homogenized garnet. The element distribution curves of the relict cores show evidence of partial element-specific modification by volume diffusion.Paragenetic and textural relations as well as temperature and pressure calculations suggest the following conditions of the main metamorphism: 700–770°C at 7-9 kbar and PH2O PtotDespite the uncertainty due to the incomplete equilibration among garnet rims and other matrix minerals, an attempt is made to model the cooling and uplift history of the rocks using textural, paragenetic, chemical and literature data.〈section xml:id="abs1-1"〉〈title type="main"〉ZusammenfassungGneise aus dem südlichen Teil der Bunten Serie wurden im Hinblick auf ihre Metamorphoseentwicklung untersucht. Sie gehören allgemein dem Faziestyp Bt+Sil+Kfs+Qtz+Grt an. Die Granate weisen alle für diesen Faziestyp charakteristischen Merkmale auf: weitgeheride Homogenisierung durch Diffusion und Abkühlungserscheinungen am äuβeren Rand. Ca- und Mn- reiche reliktische Kerne mancher Granate weisen auf ein älteres Ereignis hin. Diese Relikte werden im homogenisierten Granat höherer Bildungstem-peratur eingeschlossen. Ihre Element- Verteilungskurven sind teilweise durch die intrakristalline Diffusion dem Kationenradius entsprechend abgeflacht.Paragenetische Beziehungen und T- und P-Berechnungen ergeben folgende Bedingungen für die Hauptmetamorphose: 700–770°C bei 7-9 kbar und PH2OPtot.Trotz der Unsicherheit, die auf eine unvoll-ständige Einstellung des Gleichgewichtes zwischen Granaträndern und den übrigen Matrixmineralen zurückzuführen ist, wurde ver-sucht, ein Modell über die Abkühlungs- und Hebungsgeschichte der untersuchten Gesteine zu erstelleu.

Notes: Abstract A study has been made of the high-pressure early-Alpine re-equilibration in the eclogites and metasedimentary cover of the Val d'Ala di Lanzo ophiolite. All of the main high-pressure minerals have been analysed and their compositions used to determine re-equilibration temperatures. The minimum conditions proposed (P= 1.3 GPa, T= 450–460°C) are also indicated by the presence of a jadeite+quartz-bearing metagranite.The temperatures are compared with those reported for similar eclogites from the Voltri Group, the Aosta Valley and the Valais. Comparison of recalculated temperatures shows that the temperature (and probably the pressure) of the eclogitic re-equilibration increased in the Aosta Valley and the Valais, in keeping with what has been observed in the internal Penninic basement of the Gran Paradiso and Monte Rosa crystalline massifs.

Notes: MIGMATITES

Notes: Abstract This work uses a simplified model of equilibrium to predict the assemblage sequence and compositional zoning in garnet that should result from prograde metamorphism of common bulk compositions of pelitic rocks. An internally-consistent set of model thermodynamic data are derived for natural mineral compositions from natural assemblages. Equilibrium assemblages can be calculated for pelitic compositions with excess quartz and either muscovite or K-feldspar at any pressure and water pressure. The compositions and abundances of phases in equilibrium assemblages can be calculated where the elements Mg, Fe and Mn are exchanged among phases. The prograde metamorphic assemblage sequences and the effects of pressure on assemblages, predicted by the simulation method presented here, are similar enough to natural observations to suggest that the simulations can be used to analyse natural equilibrium and growth processes.The calculated phase diagrams at moderate and high crustal pressures explain the mineral assemblage sequence produced by prograde metamorphism in common pelitic compositions. Garnet appears by continuous reaction of biotite and chlorite as the garnet-biotite-chlorite divariant field migrates toward higher Mg/Fe ratios over the bulk composition. Staurolite appears in common bulk compositions when garnet and chlorite become incompatible. An aluminum silicate phase can appear when staurolite and chlorite react. Staurolite breaks down at an extremum point to produce garnet. Continuous reaction of biotite and sillimanite causes growth of abundant garnet.The reaction sequence involving garnet, staurolite and aluminum silicates is probably different at low pressure, but the main reason that staurolite and garnet are rare is the restricted compositional range over which their assemblages exist. Andalusite appears by the divariant reaction of chlorite and cordierite appears at low temperature in low pressure assemblages for common bulk compositions by the extremumpoint breakdown reaction of chlorite.Compositional zoning of garnet and the systematic variation of biotite composition in metamorphic sequences indicate that garnet is probably fractionated during growth. Fractionation of garnet causes garnet-consuming, univariant reactions to become multivariant. The metastable persistence of garnet should reduce the abundance and stability range of staurolite. Fractionation of even small quantities of garnet should deplete the equilibrating bulk composition of Mn, but have little effect otherwise. The simulations show that the prograde assemblage sequence in pelitic rocks can be complex in detail, with some assemblages lasting over temperature intervals of only a few degrees.The major prograde reactions that release water are the breakdown of chlorite to form garnet at low grade and the breakdown of muscovite at high grade. The volume of water released by formation of garnet at high grade is also important. These reactions have the capacity to buffer water pressure.The density of anhydrous pelitic rock increases markedly when chlorite breaks down and by the continuous reaction forming garnet at high grade. The heat content is controlled principally by heat capacity and continuous reactions. Discontinuous reactions have little thermal buffering capacity.Simulations of garnet fractionation show that commonly-observed garnet zoning profiles can be formed by garnet growth in the assemblage garnet-biotite-chlorite in common bulk compositions. A reversal of Fe-zoning in garnet can occur when garnet resumes growth above staurolite grade in the assemblage garnetbiotite-sillimanite. Discontinuities in zoning profiles can be caused only by disequilibrium. The disequilibrium can be due to either metastable persistence during a hiatus in growth or to growth by irreversible reaction.Because the appearance of garnet is controlled by a continuous rather than a discontinuous reaction, the appearance of garnet is very sensitive to bulk composition. The early development of garnet is also sensitive to the pressure and water pressure of metamorphism. As a consequence the first garnet isograd is of limited thermometric value.Metastable persistence of kyanite and manite at high grades could reduce the abundance of garnet and allow biotite to persist. Metastable persistence would also limit the of cordierite formation.

Notes: Abstract Whole-rock and mineral analyses of polydeformed mica-schist, quartzite, marble and amphibolite are presented from Signy Island, South Orkney Islands, part of the Scotia metamorphic complex. Whole-rock chemistry suggests that the amphibolites are the metamorphosed equivalent of enriched tholeiitic and alkali basalts of an oceanic intraplate basalt series. These, together with limestones and Mn-rich cherts of an oceanic island assemblage were tectonically mixed with trench or trench inner slope basin sediments in a subduction zone environment. Variation in mineral chemistry indicates an increase in temperature and decrease in pressure during metamorphism; pressures of 8 kbar and temperatures of approximately 545°C were reached during amphibolite facies metamorphism in the latter stages of deformation. These new data provide good evidence to support the previous interpretation of the Scotia metamorphic complex as a subduction complex.

Notes: Abstract The mid-Tertiary blueschists, eclogites and eclogitic gneisses of northern New Caledonia are the products of four phases of regional metamorphism and deformation (D1–D4). Omphacite, lawsonite and Mn-rich garnet isogradic surfaces were developed during the second deformation (D2) under prograde pressure and temperature conditions. Subsequent deformations (D3–D4) folded these D2 isogradic surfaces. However, within the P-retrograde, T-prograde metamorphic environment of the D4 phase, omphacite altered to albite and chlorite; as a result, a late-stage sub-horizontal isogradic surface developed for omphacite-out where this mineral preserved as relics within syn-D4 albite porphyroblasts. Other minerals that crystallized for the first time (epidote) or had rim additions (almandine phengite) during D4, also form nearly horizontal isogradic surfaces. Porphyroblastic garnet and albite contain inclusion trails, which allow their microstructural development and crystallization of the matrix to be traced from D2 to D4.Late syn-D4 the temperature increased markedly in association with an extensive exothermic decarbonation, even though the rocks were in a state of pressure retrogression. This caused considerable neocrystallization, recrystallization and growth of mattix and porphyroblasts such that, although S2 foliation crenulated by D3 and D4 is readily observable, almost all signs of stored strain due to D3 and D4 have been removed, and the deeper schists and eclogitic gneisses superficially appear to have undergone a drastic annealing recrystallization, post-dating deformation.

Notes: The Kanskaya formation in the Yenisey range, Eastern Siberia is a newly studied example of retrogression of granulite facies rocks. The formation consists of two stratigraphical units: the lower Kuzeevskaya group and the upper Atamanovskaya group. Rocks from both of these units show rare reaction textures such as replacement of cordierite by garnet, sillimanite and quartz, silimanite coronas around spinel and corundum, and garnet rims around plagioclase in metabasites, while plagioclase rims around garnet can be seen in associated metapelites. The paragenesis quartz + orthopyroxene + sillimanite is a feature of the Kuzeevskaya group. In many samples, chemical zoning of garnet and cordierite shows an increase in Mg from core to rim as well as the reverse.Biotite-garnet-cordierite-sillimanite-quartz as well as spinel±biotite-garnet°Cordierite±sillimanite-quartz assemblages were studied using geothermometers and geobarometers based on both exchange and net-transfer reactions (Perchuk & Lavrent'eva, 1983; Aranovich & Podlesskii, 1983; Gerya & Perchuk, 1989). Detailed investigation of 10 samples including 1000 microprobe analyses revealed decompression (first stage) followed by the near isobaric cooling of the granulites. From geological studies, the 7 km total thickness of the sequence closely corresponds to the pressure difference (∼ 2.2kbar) measured by geobarometers in the samples taken from different levels in the sequence. Individual samples yield P-T paths ranging from 100°C/kbar to 140°C/kbar depending on their locations with respect to the large Tarakskiy granite pluton. In places the 100°C/kbar path changed to the 140°C/kbar due to the influence of the intrusion. In a P-T diagram these trajectories are subparallel lines, whose P-T maxima define the Archaean geotherm between 3.1 and 2.7 Ga, determined isotopically. A petrological model for P-T evolution of the Kanskaya formation is proposed.

Notes: A method is proposed for adjusting the mass balance to characterize quantitatively the behaviour of minerals in anatexis. The method is based on an unconstrained simple mixing model that can be expressed as: 〈displayedItem type="mathematics" xml:id="mu1" numbered="no"〉〈mediaResource alt="image" href="urn:x-wiley:02634929:JMG619:JMG_619_mu1"/〉 where B, A0, and A1-n, are compositional vectors of segregate, source rock and source minerals, respectively. The most important concepts are: (1) degree of partial fusion: FMM= 1/a0; (2) mineral fractionation index: 〈displayedItem type="mathematics" xml:id="mu2" numbered="no"〉〈mediaResource alt="image" href="urn:x-wiley:02634929:JMG619:JMG_619_mu2"/〉 and (3) plagioclase differentiation index: 〈displayedItem type="mathematics" xml:id="mu3" numbered="no"〉〈mediaResource alt="image" href="urn:x-wiley:02634929:JMG619:JMG_619_mu3"/〉 .For a given mineral, the MFI values have the following meaning: (a) MFI 〈0: residual phase originated, at least partly, as a product of incongruent melting; (b) 0 〉 MFI 〈1: preferential retention in the residue; (c) MFI= 1: identical modal fraction in source and melt; (d) a0 〉 MFI 〉 1: preferential incorporation into the segregate, and (e) MFI 〉 a0: external contribution to the anatectic system defined by a0A0. To test the method and illustrate its use, it was applied to two real problems of partial melting in the Peña Negra Anatectic Complex (Central Spain). The first is a very simple case of segregation of a diktyonitic neosome from an orthogneiss through partial melting located in vertical shear zones. This process is characterized by: (1) FMM= 0.51; (2) active incorporation of K-feldspar, plagioclase and biotite into the segregate; (3) disequilibrium melting of plagioclase; (4) residual behaviour of quartz and ilmenite. The second case concerns the formation of a cordierite-bearing granite from granodioritoid diatexites through an anatectic process, whose most salient characteristics are: (1) FMM= 0.45; (2) incongruent melting of biotite; (3) residual behaviour of plagioclase, which melted with a PDI of 1.22; (4) preferential incorporation of quartz into the segregate; (5) total extraction of K-feldspar from the residue.

Notes: Graphitic metapelites from the Howard Ridge area, British Columbia, have been studied to estimate the pressure, temperature and fluid composition attending amphibolite facies metamorphism. Results from thermobarometric calculations indicate that P-T conditions of 610–625°C and 6.7kbar were reached during metamorphism. The equilibrium paragonite-quartz-albite-kyanite-H2O gives significantly different estimates of XH2O in the metamorphic fluid using different paragonite solution models. Estimates of XH2O range from a maximum of 0.93 (Eugster et al., 1972) to a minimum of 0.29 (Chatterjee & Flux, 1986). H2O estimates obtained using the Eugster et al. (1972) and Chatterjee & Froese (1975) solution models give similar results (i.e. 0.8 ± 0.1 versus 0.7 ± 0.1, respectively). Non-ideal mixing in the C-O-H system provides an XH2O estimate of 0.74 at H2O maximum conditions, 0.5 log units below the QFM buffer. The Chatterjee & Flux (1986) paragonite solution model provides unrealistically low estimates of XH2O relative to other paragonite solution models, C-O-H equilibria, and published fluid inclusion and mineral equilibria data. Consistent estimates of fluid composition between C-O-H and mineral equilibria suggest that a H2O-rich fluid attended metamorphism of graphitic metapelites at Howard Ridge.

Notes: Rocks from the metamorphic basement of the Azuero and Sona peninsulas, Panama, consist of schistose amphibolites and minor amounts of metasediment. In the Sona peninsula, strongly zoned amphiboles indicate that the amphibolites followed a progressive anticlockwsie P-T path prograde from low T/low P to medium T/high P, and are retrograded into the greenschist facies. In contrast, the amphibolites of the Azuero peninsula are affected by a low to medium T/low P metamorphism.The metamorphic events of the Sona amphibolites occurred prior to the intra-Senonian tectonic phase which affects the Mesozoic formations along the Pacific coast of Costa Rica and Panama. The regional significance of such a basement in Isthmian Central America is discussed.

Notes: Microstructural and petrological data from the Jumping Brook metamorphic suite, western Cape Breton Highlands, suggest that a single episode of syntectonic prograde metamorphism, followed by uplift, cooling and associated retrogression, affected these rocks during mid-Palaeozoic times. Microstructures indicative of progressive crenulation foliation development can be traced from low-grade (chlorite zone) through high-grade (kyanite zone) rocks, allowing a clear sequence of porphyroblast growth to be established. Metamorphic reactions and P-T calculations suggest metamorphic conditions of 700-750°C at 8-10 kbar were achieved in kyanite zone rocks. Although a complete P-T-t path was not defined, combined petrological and geochronological data can be used to constrain computed P-T-t models. These models suggest that a component of post-metamorphic tectonic exhumation is required to explain the observed times of cooling and uplift. The microstructural and petrological data to not support the interpretation that the high-grade rocks represent pre-existing crystalline basement. Indeed, the metamorphic history, geochronology and computed tectonic models all point to a single, short-lived episode of Silurian-Devonian volcanism, intrusion, convergence, regional metamorphism and uplift, probably resulting from collision tectonics at an irregular continental margin.

Notes: Dissolution and solution transfer during deformation/metamorphism are controlled by the partitioning of deformation into progressive shearing and shortening components. Progressive shearing is readily accommodated by slip on the planar crystal structure of phyllosilicates and graphite without accumulating dislocation density gradients across grain boundaries.Progressive shortening is accommodated by the cores of most other minerals (including sulphides). These minerals develop strain, and hence dislocation density gradients, on their rims due to progressive shearing along grain boundaries. These gradients are particularly large when the mineral abuts phyllosilicate or graphite. The resulting chemical potential gradients between the core and rim drive dissolution, causing removal of the highly strained grain margins.Removal of dissolved material by solution transfer is aided by the geometry of shearing of phyllosilicates and graphite around other grains in an active anastomosing foliation. Interlayers and interfaces on boundaries lying at a low angle to the direction of shearing, and oriented relative to the sense of shear such that they can open, gape by small amounts. Water present in these interlayer spaces becomes destructured, considerably enhancing diffusion rates along the foliation.Penetrative volume loss, especially in deforming/metamorphosing pelitic rocks, is large at all metamorphic grades, increasing and becoming more penetrative with depth to at least the transition into granulite and eclogite facies. Transference of material by fluid flow from deep to high levels in the earth's crust is precluded because thousands to tens of thousands of rock volumes of fluid are required, necessitating continual recirculation of fluid from shallow to deep crustal levels in one large or several small sets of cells, unless some extremely large-scale form of fluid channelling is possible. Reassessment of diffusion mechanisms, and hence rates, during deformation and pervasive foliation generation in large volumes of rock where fluid channeling cannot provide enough fluid, indicates that diffusion can proceed with sufficient rapidity that massive recirculation of fluid is no longer required. The amount of fluid can be reduced sufficiently to allow large volume losses by a one-way flow of fluid to the earth's surface, in deforming/metamorphosing environments where the fluid pressure equals or exceeds the hydrostatic pressure.Deformation partitioning-controlled dissolution progressively changes the bulk chemistry of a rock containing phyllosilicates or graphite during deformation/metamorphism because matrix minerals, other than phyllosilicates and graphite, are preferentially removed. The large size of porphyroblasts, if present, tends to preserve them from dissolution. Hence, the bulk chemistry operative during subsequent porphyroblast growth can have changed considerably from that operative when the first porphyroblasts grew, in rocks in which bedding is still well preserved.

Notes: Low-pressure granulite facies metasedimentary gneisses exposed in MacRobertson Land, east Antarctica, include hercynitic spinel-bearing metapelitic gneisses. Peak metamorphic mineral assemblages include spinel + rutile + ilmenite + sillimanite + garnet, spinel + ilmenite + sillimanite + garnet + cordierite, ortho-pyroxene + magnetite + ilmenite + garnet, spinel + cordierite + biotite + ilmenite and orthopyroxene + cordierite + biotite, each with quartz, K-feldspar and melt. The presence of garnet + biotite- and cordierite + orthopyroxene-bearing assemblages implies crossing tie-lines in AFM projection for the K2O-FeO-MgO-Al2O3-SiO2-H2O (KFMASH) system. This apparent contradiction, and the presence of spinel, rutile and ilmenite in the assemblages, is acounted for by using the KFMASH-TiO2-O2 system, i.e. AFM + TiO2+ Fe2O3. We derive a petrogenetic grid for this system, applicable to low-pressure granulite facies metamorphic conditions. Retrograde assemblages are interpreted from corona textures on hercynitic spinel and Fe-Ti oxides. The relative positions of the peak and retrograde metamorphic assemblages on the petrogenetic grid suggest that corona development occurred during essentially isobaric cooling.

Notes: Sequential reaction textures in Archaean garnet-corundum-sapphirine granulites from the Central Zone of the Limpopo Belt document a progression from early, coarse-grained, high-pressure (P 〉 9.5 kbar) granulite-facies assemblages (M1) to late, low-pressure (P 〈6 kbar) granulite-facies sub-assemblages (M2).The stable M1 assemblage was garnet (57% pyrope; Mg/(Mg + Fe) = 62) + sapphirine + corundum + gedrite + phlogopite + rutile. Late-M1 boron-free kornerupine grew at the expense of garnet and corundum, and coexisted with garnet, sapphirine and gedrite. Partial or complete breakdown of coarse garnet and kornerupine during M2 resulted in the development of pseudomorphs and coronas consisting of fine-grained symplectic intergrowths of cordierite, gedrite and sapphirine (later, spinel).The majority of reaction textures can be explained in terms of a stable reaction sequence, and a model time-sequence of mineral facies can be constructed. When compared with a qualitative petrogenetic grid of (Fe, Mg)-discontinuous reactions in the FMASH multisystem sapphirine-garnet-corundum-spinel-cordierite-gedrite-kornerupine, the facies-sequence indicates decompression at essentially constant T assuming constant a(H2O).Exhumation of M1 corundum inclusions during M2 breakdown of kornerupine resulted in production of metastable spinel by a disequilibrium reaction with gedrite. A second disequilibrium reaction of the spinel with cordierite produced sapphirine. The operation of such reaction while pressure was decreasing (the opposite dP from that implied by the texture if assumed to be the product of an equilibrium reaction) has serious implications for the use of reaction textures in the construction of P-T vectors.Garnet-biotite thermometry on garnet interiors and phlogopite inclusions in corundum yields temperatures of ca. 850°C for the M1 stage. A minimum late-M1 pressure of ca. 7 kbar is indicated by the former association of kornerupine and corundum. Relict M1 kyanites reported by other workers indicate a minumum early-M1 pressure of 9.5 kbar, implying metamorphism at depths of at least 33 km (probably 〈inlineGraphic alt="geqslant R: gt-or-equal, slanted" extraInfo="nonStandardEntity" href="urn:x-wiley:02634929:JMG383:ges" location="ges.gif"/〉 38km). The high-pressure granulite-facies metamorphism was followed by an almost isothermal pressure decrease of 〉 5 kbar, indicative of rapid uplift. The P-T path is interpreted as the product of a single metamorphic cycle which probably took place in response to tectonic thickening of the crust. Such a process contrasts with the extensional origin recently proposed for isobarically cooled granulite-facies terranes.

Notes: The early metamorphic history of high-grade exotic blocks in the Franciscan Complex may be more complicated than previously supposed. The different assemblages of high-grade glaucophane schist, eclogite, amphibolite and hornblende schist are commonly considered to have formed at the same time from essentially unmetamorphosed oceanic crust. However, new textural and mineralogical data presented here suggest that high-grade glaucophane schist and eclogite have replaced an earlier epidote-amphibolite facies assemblage that is identical to the primary assemblages in many of the hornblende-rich blocks. At least some of the hornblende-rich blocks may therefore be well-preserved remnants of the earlier metamorphism. Comparison of the mineral assemblages and element partitioning in the mixed-assemblage blocks suggests that the glaucophane schist and eclogite metamorphism took place at slightly lower temperatures but at the same or higher pressures than the earlier, hornblende-forming stage.

Notes: The High Himalayan Crystallines (HHC) of SE Zanskar consist of biotite paragneisses, of orthogneisses that derive from early-Palaeozoic granitoids, of minor metabasics and of post-metamorphic leucogranites of Miocene age.Two main metamorphic events have been documented in the HHC. The first event occurred at P= 12.0 ± 0.5 kbar and T= 750 ± 50° C in rare metabasics intruded by early-Palaeozoic granitoids. In the biotite paragneisses, thermobarometric estimates of the first event point to comparable T at P 4–5 kbar lower. The first event is followed by a pervasive syn-tectonic crystallization characterized by lower P and T. On the basis of the cooling ages of the metamorphic minerals and on the geological evidence, the second event is referred to the Tertiary Himalayan crystallization. Further petrological and geochronological studies are necessary to prove whether a few mineral relics ascribed to the first event define a polyphase Himalayan evolution or if they record the incomplete obliteration of an older history during the Himalayan event.The HHC of SE Zanskar show a decrease in metamorphic grade from the middle structural levels upward, close to the Kade unit, and downward, close to the Lesser Himalaya (from sillimanite-K-feldspar-biotite-bearing assemblages to kyanite-staurolite-muscovite-bearing assemblages). This metamorphic zonation is probably a consequence of the polyphase history of intracontinental thrusts and of the tectonic emplacement of hot crustal slabs within shallower and colder thrust sheets at relatively late stages of the continental collision between India and Eurasia.

Notes: Blueschists occur along the Indus Suture Zone in Ladakh as tectonic thrust slices, as isolated blocks within mélange units and as pebbles within continental detrital series. In the Shergol-Baltikar section high-pressure rocks within the Mélange unit lie between the Dras-Naktul-Nindam nappes in the north and the Lamayuru units in the south. The blueschists are imbricated with mélange formation of probably upper Cretaceous age. They are overlain discordantly by the Shergol conglomerate of post Eocene (Oligo-Miocene ?) age. Blueschist lithologies are dominated by volcanoclastic rock sequences of basic material with subordinate interbedding of cherts and minor carbonates. Mineral assemblages in metabasic rocks are characterized by lawsonite-glaucophane/crossite-Na-pyroxene-chlorite-phengite-titanite ± albite ± stilpnomelane. In the quartz bearing assemblages garnet is present but omphacite absent. P-T estimates indicate temperatures of 350 to 420°c and pressures around 9–11 kbar. Geochemical investigations show the primary alkaline character of the blueschist, which suggests an oceanic island or a transitional MORB type primary geotectonic setting. K/Ar isotopic investigations yield middle Cretaceous ages for both whole rocks and minerals. Subduction related HP-metamorphism affecting the Mesozoic Tethyan oceanic crust developed contemporaneously with magmatism in the Dras volcanic are and the Ladakh batholith. Subsequent collision of India with Asia obducted relics of subduction zone material which later became involved in nappe emplacement during the Himalayan mountain building.

Notes: Abstract The textural and compositional features of phlogopites in a contact-metamorphic dolomite marble inclusion in the Bergell intrusion (central Alps) and in a metasomatic reaction vein cutting through this marble suggest different origins for vein phlogopites:(a) High-Al vein phlogopite represents former marble phlogopite which has been compositionally modified by reaction with the vein forming fluid.(b) Low-Al vein phlogopite represents phlogopite precipitated from the vein forming fluid.As both types of vein phlogopite were in contact with the same vein forming fluid at the same time, low-Al phlogopite most likely represents an equilibrium phlogopite composition, whereas high-Al phlogopite does not. High-Al vein phlogopite retained its Al-content from the contact-metamorphic marble parent phlogopite and only underwent Fe-Mg exchange with the metasomatic fluid.All the vein phlogopites studied are strongly enriched in Fe relative to marble phlogopite. The data may suggest in general that phlogopite Al/Si ratios may be retained from the conditions under which the phlogopites first formed, whereas the Mg/Fe-ratios may be substantially modified by exchange with other ferromagnesian solid phases and/or a metamorphic fluid at later stages in their metamorphic history. This may have significant effects on calculated pressures and temperatures from thermobarometers involving biotite.

Notes: Abstract The Saint-Martin des Noyers Formation is interpreted as a slice of an island-arc system of Lower to Middle Palaeozoic age, located in the internal part of the Variscan orogen in Vendée (Armorican Massif, France). Metamorphosed igneous rocks range in composition from ultramafic to rhyolitic. The regular increase in the FeO/(FeO+MgO) ratio, from mafic to silicic samples, results in a systematic variability in the nature and composition of the metamorphic phases. In basaltic samples, the occurrence of relict garnet-barroisite assemblages suggests relatively high-pressure conditions for the peak of metamorphism. During a subsequent retrograde evolution, the primary barroisitic hornblendes recrystallized to texturally complex mixtures of actinolite and hornblende. Despite this complication, it is possible to decipher a P–T-t path based on amphibole chemistry. The P–T trajectory deduced is dominated by the effect of pressure and consistent with early underthrusting and subsequent tectonic uplift of the ancient arc of Saint-Martin des Noyers.

Notes: Abstract In order to study the thermal structure of active thrust belts, we have developed a numerical model of conductive heat transfer between thrust sheets during deformation. Our finite difference approach alternates small, instantaneous increments of displacement and isotherm translation with conductive relaxation of perturbed isotherms. In each step, conduction occurs for a length of time equal to the displacement increment divided by the thrust velocity. Computer simulations demonstrate that conductive heat transfer is significant during deformation and that temperatures in hanging-wall rocks decrease while temperatures in foot-wall rocks increase over distances of up to 10 km from the thrust surface. When the effects of internal heat production are also calculated, heating of foot-wall rocks exceeds cooling of hanging-wall rocks. Rocks located between two thrusts may experience a complicated temperature–time path of early heating followed by cooling. These models help to explain the rapid metamorphism of rocks in the Taconian thrust belt in the northern Appalachians of New England soon after deposition of the youngest sediments.

Notes: Abstract 40Ar/39Ar age spectrum analysis of phengite separates from Naxos, part of the Attic Cycladic Metamorphic Belt in Greece, indicates that cooling following high-pressure, low- to medium-temperature metamorphism, M1, occurred about 50 Ma ago. Phengite has 40Ar* gradients that suggest that part of the scatter observed in conventional K–Ar ages was caused by diffusion of radiogenic argon from the minerals during a younger metamorphism, M2. In central Naxos, this metamorphism (M2) has overprinted the original mineral assemblages completely, and is associated with development of a thermal dome. Excellent 40Ar/39Ar plateaus at 15.0 ± 0.1 Ma, 11.8 ± 0.1 Ma, and 11.4 ± 0.1 Ma, obtained on hornblende, muscovite and biotite, respectively, from the migmatite zone, indicate that relatively rapid cooling followed the M2 event, and that no significant thermal overprinting occurred subsequent to M2. Toward lower M2 metamorphic grade, 40Ar/39Ar plateau ages of hornblendes increase to 19.8 ± 0.1 Ma; concomitantly the proportion of excess 40Ar in the spectra increases as well. We propose that the peak of M2 metamorphism occurred beween 15.0 and 19.8 Ma ago. K–Ar ages of biotites from a granodiorite on the west coast are indistinguishable from those found in the metamorphic complex, and hornblende K–Ar ages from the same samples are in the range 12.1–13.6 Ma. As the latter ages are somewhat younger than most ages obtained from the metamorphic complex, intrusion of the granodiorite most likely followed the peak of the M2 metamorphism.The metamorphic evolution of Naxos is consistent with rapid crustal thickening during the Cretaceous or early Tertiary, causing conditions at which supracrustal rocks experienced pressures in the range 900–1500 MPa. Transition to normal crustal thicknesses ended the M1 metamorphism about 50 Ma ago. The M2 metamorphism and granodiorite intrusion occurred during a period of heat input into the crust, possibly related to the migration of the Hellenic volcanic ar°C in a southerly direction through the area.