ALBERT

All Library Books, journals and Electronic Records Telegrafenberg

X
feed icon rss

Your email was sent successfully. Check your inbox.

An error occurred while sending the email. Please try again.

Proceed reservation?

Export
Filter
  • Other Sources  (957)
  • AIRCRAFT DESIGN, TESTING AND PERFORMANCE  (957)
  • 1975-1979  (948)
  • 1945-1949  (9)
  • 1
    facet.materialart.
    Unknown
    Application of numerical optimization techniques to high speed inlet bleed system design (1977)
    In:  CASI
    Details
    Publication Date: 2006-01-10
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: Inlet Workshop; p 280-287
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 2
    facet.materialart.
    Unknown
    Selected topics from the structural acoustics program for the B-1 aircraft (1979)
    In:  CASI
    Details
    Publication Date: 2006-07-02
    Description: The major elements of the structural acoustics program for the B-1 aircraft are considered. Acoustic pressures measured at 280 sites on the surface of the vehicle were used to develop pressure models for a resizing of airframe components for aircraft No. 4 (A/C4). Acoustical fatigue design data for two dynamically complex structural configurations were acquired in laboratory programs, the conceptions for and executions of which detailed significant departures from the conventional. Design requirements for mechanical fasteners for configurations other than these two made use of analytical extensions of regrettably limited available information.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: Shock and Vibration Inform. Center The Shock and Vibration Bull., Pt. 3; p 55-68
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 3
    facet.materialart.
    Unknown
    Vibration investigation of a large transport helicopter (1977)
    In:  CASI
    Details
    Publication Date: 2004-11-29
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: Shock and Vibration Inform. Center The Shock and Vibration Bull. Part 3 Sept. 1977; p 139-147
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 4
    facet.materialart.
    Unknown
    A new formulation for the epsilon method applied to the minimum-time-to-climb problem (1978)
    In:  CASI
    Details
    Publication Date: 2006-03-02
    Description: Balakrishnan's epsilon technique is used to compute minimum-time profiles for the F-104 airplane. This technique differs from the classical gradient method in that a quadratic penalty on the error in satisfying the equation of motion is included in the cost function to be minimized as a means of eliminating the requirement of satisfying the equations of motion. Although the number of unknown independent functions is increased to include the state variables, the evaluation of the gradient of the cost function is simplified, resulting in considerable computational savings, thereby making it appear feasible to use the epsilon method for real-time application.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: NASA, Washington Fourth Inter-Center Control Systems Conf.; p 423-434
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 5
    facet.materialart.
    Unknown
    In-flight three-dimensional boundary layer and wake measurements from a swept supercritical wing (1978)
    In:  CASI
    Details
    Publication Date: 2006-02-22
    Description: Three-dimensional boundary layer and wake velocity profiles were measured in flight on the supercritical wing of the F-111 transonic aircraft technology aircraft. These data, along with pressure distributions, were obtained to establish a data base with which data obtained by three-dimensional analytical techniques could be correlated. Only a brief summary of the total data base is given. The data presented represented one chord station at a wing leading-edge sweep angle of 26 deg. They cover an angle of attack range from 6 degs to 9 degs at free-stream Mach numbers from 0.85 to 0.90. A brief discussion of the techniques used to obtain the boundary layer and wake profiles is included.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: NASA. Langley Res. Center Advanced Technol. Airfoil Res., Vol. 1, Pt. 2; p 643-655
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 6
    facet.materialart.
    Unknown
    Proportioning the airplane for lateral stability (1976)
    In:  CASI
    Details
    Publication Date: 2006-01-16
    Description: Proportioning for lateral aircraft control included: (1) directional stability (slope of curve of yawing moment coefficient against sideslip), and (2) effective dihedral factor (slope of curve of rolling moment coefficient against sideslip). Basic forces influencing the directional stability of aircraft are indicated. Propeller side force, basic fuselage yaw, and vertical tail side force contributed to yaw moment about center of gravity.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: Collected Works of Charles J. Donlan; 6 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 7
    facet.materialart.
    Unknown
    Status of cavity noise phenomena measurement and suppression on the B-1 aircraft (1979)
    In:  CASI
    Details
    Publication Date: 2006-01-16
    Description: During the B-1 aircraft development, an extensive program of weapons bay cavity noise measurement and suppression studies was performed using wind tunnel models, flight test measurements, and aircraft design modifications. Substantial cavity noise reduction was demonstrated during flight test operations. The unsuppressed cavity noise level of 170 dB was reduced to values less than 150 dB with external retractable spoilers upstream of the cavity opening.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: Shock and Vibration Inform. Center The Shock and Vibration Bull., Pt 1; p 59-66
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 8
    facet.materialart.
    Unknown
    Spin tests of 1/16-scale models of the N3N-3 landplane and seaplane, 12 January 1940 (1976)
    In:  CASI
    Details
    Publication Date: 2006-01-16
    Description: The test program included the study of both the seaplane and landplane types. On both versions of the model, the effects of loading changes and control dispositions were examined, and on the seaplane, the effect of the cowled and uncowled engine was investigated.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: Collected Works of Charles J. Donlan; 37 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 9
    facet.materialart.
    Unknown
    Spin tests of a 1/20-scale model of the XF4U-1 airplane, 12 July 1939 (1976)
    In:  CASI
    Details
    Publication Date: 2006-01-16
    Description: These tests were performed to determine the spinning characteristics of the 1/20-scale model of the XF4U-1 airplane. Effects of loading changes and various control dispositions using both the original and modified vertical tail surfaces were studied. Subsequent tests were made to determine the effects of additional tail modifications.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: Collected Works of Charles J. Donlan; 47 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 10
    facet.materialart.
    Unknown
    Spin tests of a 1/20-scale model of the XP-39 airplane, 15 March 1939 (1976)
    In:  CASI
    Details
    Publication Date: 2006-01-16
    Description: The tests were performed to determine the spinning characteristics of a 1/20-scale model of the Bell XP-39 airplane. Effects of loading changes and of various control dispositions were studied. Subsequent tests were performed to determine the effect of a change in wing dihedral.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: Collected Works of Charles J. Donlan; 23 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 11
    facet.materialart.
    Unknown
    Lateral stability and control tests of the XP-77 airplane in the NACA full-scale tunnel, 16 June 1944 (1976)
    In:  CASI
    Details
    Publication Date: 2006-01-16
    Description: Tests were made in the NACA full-scale tunnel to determine the lateral stability and control characteristics of the XP-77 airplane. Measurements were made of the forces and moments on the airplane at various angles of attack and angles of yaw. The measurements were made with the propeller removed and with the propeller installed and operating at various thrust coefficients, and with the landing flaps retracted and deflected. The effects of aileron, elevator, and rudder deflection on control surface effectiveness and hinge moments were determined. The tests were planned to obtain the data required to evaluate as completely as possible the Army Air Force requirements on lateral stability and control for pursuit-type airplanes.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: Collected Works of Charles J. Donlan; 84 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 12
    facet.materialart.
    Unknown
    Opportunities for aerodynamic-drag reduction (1975)
    In:  CASI
    Details
    Publication Date: 2006-01-11
    Description: Methods for reducing aerodynamic drag to improve aircraft performance and reduce fuel consumption are discussed. The techniques considered are: (1) pressure drag reduction, (2) supercritical airfoils, (3) subcritical airfoils, (4) induced drag reduction by over-the-wing blowing and increased aspect ratio, and (5) friction drag reduction by laminar flow control and slot injection. It is stated that a 50 percent reduction from current drag values is expected through the application of these techniques.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: NASA/Univ. Conf. on Aeron.; p 323-352
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 13
    facet.materialart.
    Unknown
    Some trends in aircraft design: Structures (1975)
    In:  CASI
    Details
    Publication Date: 2006-01-11
    Description: Trends and programs currently underway on the national scene to improve the structural interface in the aircraft design process are discussed. The National Aeronautics and Space Administration shares a partnership with the educational and industrial community in the development of the tools, the criteria, and the data base essential to produce high-performance and cost-effective vehicles. Several thrusts to build the technology in materials, structural concepts, analytical programs, and integrated design procedures essential for performing the trade-offs required to fashion competitive vehicles are presented. The application of advanced fibrous composites, improved methods for structural analysis, and continued attention to important peripheral problems of aeroelastic and thermal stability are among the topics considered.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: NASA/Univ. Conf. on Aeron.; p 213-272
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 14
    facet.materialart.
    Unknown
    Flight test techniques for low speed airfoil evaluation (1978)
    In:  CASI
    Details
    Publication Date: 2006-02-21
    Description: Techniques for in-flight evaluation of new airfoils by modifying a single engine general aviation aircraft and measuring and recording airfoil surface pressures, airfoil wake pressures, and aircraft angle of attack and airspeed are presented. Included are descriptions of the aircraft modifications, instrumentation, data reduction techniques, illustrations of typical results and comments on new equipment for flight test applications.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: NASA. Langley Res. Center Advanced Technol. Airfoil Res., Vol. 1, Pt. 2; p 623-642
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 15
    facet.materialart.
    Unknown
    Propulsive effects due to flight through turbulence (1975)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: A simple and straightforward analysis is presented for evaluating the approximate magnitude of the propulsive effect for various types of airplane (soaring glider, light airplane, fighter, and transport). The airplane, subject to vertical gust disturbances, is assumed to be constrained to fly at constant airspeed and constant pitch angle. Changes in the magnitude and direction of the lift vector are taken into account. It is shown that the thrust effects due to turbulence vary as the square of the turbulence intensity and are quite small for moderate turbulence. Only for rather severe turbulence are the effects large enough to be given any consideration. The thrust coefficient is 10-20% of the drag coefficient of a soaring glider.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: Journal of Aircraft; 12; July 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 16
    facet.materialart.
    Unknown
    Comparison of sonic boom minimization results in real and isothermal atmospheres (1975)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The method of Seebass and George (1972, 1974) for minimizing certain features of the pressure signature and yielding the corresponding F function and equivalent area distribution A in an isothermal atmosphere is modified to provide the same capability for a real atmosphere. The appropriate equations of George and Plotkin (1969) describing horizontal advance, ray tube area, and signature propagation are used.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: Journal of Aircraft; 12; May 1975
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 17
    facet.materialart.
    Unknown
    Toward scramjet aircraft (1978)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: The possibility for civil, military, and remotely-piloted aviation above Mach 5 is discussed with reference to the scramjet. Actively cooled aircraft structures of low weight are described, together with jet nozzle design and combustion parameters. The scramjet is seen as operating alone or in tandem with ramjet propulsion, which would power an aircraft up to scramjet speeds. Attention is given to the specific impulse of the scramjet engine, with hydrogen as the primary fuel. Applications include: advanced reconnaissance and interceptor aircraft, strategic cruise (both aircraft and missiles), highly-maneuverable interceptor missiles, transports, aircraft-type launch vehicles, first stages for Space Shuttle launching craft, and single-stage-to-orbit vehicles. Research has focused on increasing the propulsion power of the scramjet engine, while reducing drag on the accompanying airframe.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: Astronautics and Aeronautics; 16; Feb. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 18
    facet.materialart.
    Unknown
    Advanced supersonic cruise aircraft technology (1977)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: A multidiscipline approach is taken to the application of the latest technology to supersonic cruise aircraft concept definition, and current problem areas are identified. Particular attention is given to the performance of the AST-100 advanced supersonic cruise vehicle with emphasis on aerodynamic characteristics, noise and chemical emission, and mission analysis. A recently developed aircraft sizing and performance computer program was used to determine allowable wing loading and takeoff gross weight sensitivity to structural weight reduction.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: Acta Astronautica; 4; Jan
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 19
    facet.materialart.
    Unknown
    Hypersonic transport technology (1977)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: The possibility of developing a hypersonic commercial transport (HST) for the early 21st century is explored in terms of potential performance characteristics and recent advances in propulsion and structures technology. Range-gross weight characteristics indicate that a 200 passenger, Mach 6 aircraft with a range of 9200 km (5000 n.mi.) would have a gross take-off weight not too different from that of current wide-body subsonic transports. The low cruise sonic boom overpressures generated by the HST opens the possibility of supersonic overland flight which, if permitted, would greatly increase the attractiveness of this type of aircraft. Recent advances in hypersonic propulsion systems and long-lived hypersonic aircraft structure are also discussed. The airframe-integrated scramjet and the actively-cooled airframe structure are identified as the most promising candidates for the HST and current approaches are described in some detail.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: Acta Astronautica; 4; Jan
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 20
    facet.materialart.
    Unknown
    The oblique wing - Aircraft design for transonic and low supersonic speeds (1977)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: In tests at transonic speeds a conventional 'subsonic' wing turned at an oblique angle to the flow has demonstrated lift-drag ratios higher than conventional swept-back or delta wings. When returned to its straight position, perpendicular to the flow, such a wing would minimize the display of energy and noise in the airport environment. Following a brief review of theoretical and experimental results, the paper discusses various characteristics of the oblique wing as they relate to aircraft design. Topics covered are lift-drag ratio, flight control and trim and aeroelastic stability. The possibility of an all-wing aircraft for flight at Mach 2 is suggested.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: Acta Astronautica; 4; Jan
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 21
    facet.materialart.
    Unknown
    Problems inherent in using aircraft for radio oceanography studies (1977)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: Some of the disadvantages relating to altitude stability and proximity to the ocean are described for radio oceanography studies using aircraft. The random oscillatory motion introduced by the autopilot in maintaining aircraft altitude requires a more sophisticated range tracker for a radar altimeter than would be required in a satellite application. One-dimensional simulations of the sea surface (long-crested waves) are performed using both the JONSWAP spectrum and the Pierson-Moskowitz spectrum. The results of the simulation indicate that care must be taken in trying to experimentally verify instrument measurement accuracy. Because of the relatively few wavelengths examined from an aircraft due to proximity to the ocean and low velocity compared to a satellite, the random variation in the sea surface parameters being measured can far exceed an instrument's ability to measure them.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: IEEE Transactions on Antennas and Propagation; AP-25; Jan. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 22
    facet.materialart.
    Unknown
    Hypersonic technology-approach to an expanded program (1976)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: An overview of research, testing, and technology in the hypersonic range. Military and civilian hypersonic flight systems envisaged, ground testing facilities under development, methods for cooling the heated airframe, and use of hydrogen as fuel and coolant are discussed extensively. Air-breathing hypersonic cruise systems are emphasized, the airframe-integrated scramjet configuration is discussed and illustrated, materials proposed for hypersonic vehicles are reviewed, and test results on hypersonic flight (X-15 research aircraft) are indicated. Major advances and major problems in hypersonic flight and hypersonic technology are outlined, and the need for a hypersonic flying-laboratory research craft is stressed.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: Astronautics and Aeronautics; 14; Dec. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 23
    facet.materialart.
    Unknown
    Aeroacoustics: STOL noise; Airframe and airfoil noise (1976)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The papers in this volume reflect the progress in aeroacoustic research which has been made in the field of VTOL and V/STOL aircraft noise. The research was directed mainly at developing better methods for predicting noise generation and propagation, at determining the effects of pressure fluctuations on surfaces and interior noise, and at developing noise abatement techniques. Among the topics covered are: scrubbing noise of externally blown flaps; propulsive-lift noise of an upper-surface-blown flap configuration; the aeroacoustic characteristics of model slot nozzles with straight flaps; fluctuating pressures on aircraft wing and flap surfaces associated with powered-lift systems; acoustic characteristics of a large upper-surface-blown configuration with turbofan engines; the effect of forward speed on jet/flap interaction noise; and airframe noise in the far field.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 24
    facet.materialart.
    Unknown
    A review of some tilt-rotor aeroelastic research at NASA-Langley (1976)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: An overview of an experimental and analytical research program conducted within the Aeroelasticity Branch of the NASA Langley Research Center for studying the aeroelastic and dynamic characteristics of tilt-rotor VTOL aircraft is presented. Selected results from several joint NASA/contractor investigations of scaled models in the Langley transonic dynamics tunnel are shown and discussed with a view toward delineating various aspects of dynamic behavior peculiar to proprotor aircraft. Included are such items as proprotor/pylon stability, whirl flutter, gust response, and blade flapping. Theoretical predictions, based on analyses developed at Langley, are shown to be in agreement with the measured stability and response behavior.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: Journal of Aircraft; 13; May 1976
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 25
    facet.materialart.
    Unknown
    Feasibility of modern airships - Preliminary assessment (1977)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: Attention is given to the NASA program, Feasibility Study of Modern Airships, initiated to investigate potential research and technology programs associated with airship development. A historical survey of the program is presented, including the development of past airship concepts, aerodynamical and design improvements, structure and material concepts, and research in controls, avionics, instrumentation, flight operations, and ground handling. A mission analysis was carried out which considered passenger and cargo transportation, heavy-lift, short-haul applications, surveillance missions, and the transportation of natural gas. A vehicle parametric analysis examined the entire range of airship concepts, discussing both conventional airships and hybrids. Various design options were evaluated, such as choice of structural materials, use of boundary-layer control, and choice of lifting gas.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: Journal of Aircraft; 14; Nov. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 26
    facet.materialart.
    Unknown
    Shuttle carrier aircraft flight tests (1977)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: Since the Space Shuttle will need to be transported from its place of assembly to the launch site, a method has been developed whereby the Shuttle rides piggyback on a modified Boeing 747, called the Shuttle carrier aircraft (SCA). This paper describes tests of the SCA in its mated configuration. Tests include: flutter, found to decrease when fiberglass and wood fairings were added to the base of each supporting pylon; stability and control, found to be acceptable after damping with control pulses; noise and buffet, found high but acceptable; and climb, in which drag was marked but acceptable with the special rated thrust (SRT) power setting. Simulated launch maneuvers were undertaken at an airspeed of 273 KCAS. Transport of the Shuttle takes place with the Shuttle tail cone on, at a cruise speed of 288 KCAS at an altitude of 22,000 feet.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 27
    facet.materialart.
    Unknown
    Comments on 'Feasibility study of a hybrid airship operating in ground effect' (1978)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: Journal of Aircraft; 15; Feb. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 28
    facet.materialart.
    Unknown
    Toward a new V/STOL generation (1977)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: While many V/STOL problems are now better understood and technology has progressed to the point where higher thrust/weight ratios and greater stability augmentation are achievable, a number of still existing insufficiencies provide a sobering reminder that learning in ground testing and simulation, and careful methodical planning, are a prerequisite for any research and development program. The present paper is centered on the major technical problems for the Navy Type multimission V/STOL aircraft. The aircraft's configurations with and without forward lift fan are discussed, along with the propulsion systems, testing techniques, controls, displays, flight dynamics, and ground/flow field interactions.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: Astronautics and Aeronautics; 15; Nov. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 29
    facet.materialart.
    Unknown
    Some considerations in the design of transport aircraft /The W. Rupert Turnbull Lecture for 1975/ (1975)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The slow landing speeds (30 mph, 65 mph) and light wing loading required for safety in the early days of aviation are shown to be irrelevant to safe landings of propeller-driven aircraft, while increases in wing loading and landing speed have been accompanied by improved safety records. This is attributed to length of runway and time available for approach maneuvers, plus immunity to wind gusts and turbulence conferred by higher wing loadings. Aerodynamical and mechanical aspects of safe landing are discussed, with no mention of instruments. Fuel savings achievable through high aspect ratio, variable sweep angle, and supercritical airfoils are also considered.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 30
    facet.materialart.
    Unknown
    Solution of the minimum time-to-climb problem by matched asymptotic expansions (1976)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Application of singular perturbation techniques to trajectory optimization problems of flight mechanics is discussed. The method of matched asymptotic expansions is used to obtain an approximate solution to the aircraft minimum time-to-climb problem. Outer, boundary-layer, and composite solutions are obtained to zeroth and first orders. A stability criterion is derived for the zeroth-order boundary-layer solutions (the theory requires a form of boundary-layer stability). A numerical example is considered for which it is shown that the stability criterion is satisfied and a useful numerical solution is obtained. The zeroth-order solution proves to be a poor approximation, but the first-order solution gives a good approximation for both the trajectory and the minimum time-to-climb. The computational cost of the singular perturbation solution is considerably less than that of a steepest descent solution. Thus singular perturbation methods appear to be promising for the solution of optimal control problems.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: AIAA Journal; 14; July 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 31
    facet.materialart.
    Unknown
    Compatibility of take-off and landing with mission and manoeuvre performance requirements for fighter aircraft (1975)
    In:  CASI
    Details
    Publication Date: 2012-05-22
    Description: By means of an aircraft synthesis program, the effect of engine cycle, thrust to weight ratio, and wing parameter combination on field and flight performance has been investigated. For three different engine/intake configurations, thrust to weight ration and wing loading were varied. Each combination represents an aircraft designed to meet a specified mission radius. Using different lift systems and ground deceleration devices, the conditions are shown under which a matching of flight and field performance is economically feasible.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: AGARD Take-off and Landing; 7 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 32
    facet.materialart.
    Unknown
    Parameter estimation of powered-lift STOL aircraft characteristics including turbulence and ground effects (1975)
    In:  CASI
    Details
    Publication Date: 2012-05-19
    Description: Longitudinal aerodynamic coefficients are estimated from data recorded during flight tests of a powered-lift STOL aircraft. A comparison is made between the coefficient values determined by the regression and quasilinearization identification techniques from records taken during elevator pulse maneuvers. The results show that for these tests the regression method provides less scatter in coefficient estimates and provides better correlation with the predicted values. Special techniques are developed which allow identification of the coefficients from records taken during landing maneuvers in which the aircraft encounters turbulence while flying in ground effect. Flight test results are presented to illustrate the effects of air turbulence and ground proximity on the estimated coefficient values.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: AGARD Methods for Aircraft State and Parameter Identification; 10 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 33
    facet.materialart.
    Unknown
    Rotorcraft derivative identification from analytical models and flight test data (1975)
    In:  CASI
    Details
    Publication Date: 2012-05-19
    Description: A general procedure is presented for systematic development of rotorcraft models for use in systems identification, which includes fuselage and rotor degrees of freedom (DOF). Formulations for rigid blade flap and lag as well as the normal mode representation of an elastic blade are developed for hingeless and articulated rotor systems. The method of multiblade coordinates is used to obtain linear constant coefficient state variable models of various levels of approximation. Two of the approximate models, a 6 DOF, are identified from a nonlinear articulated helicopter computer simulation. The results demonstrate the accuracy attainable for each model. Advanced results outline the status of rotorcraft modeling and systems identification and indicate areas that require further investigation.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: AGARD Methods for Aircraft State and Parameter Identification; 31 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 34
    facet.materialart.
    Unknown
    CTOL concepts and technology development (1978)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: Various developments in the Aircraft Energy Efficiency (ACEE) program are discussed. Terminal-area operations are considered with emphasis on the Terminal Configured Vehicle program. Consideration is also given to aircraft systems studies and economics (including noise reduction programs), coal-derived fuels for aviation systems (including LH2-fueled aircraft), and transport-aircraft concepts (including laminar flow control).
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: Astronautics and Aeronautics; 16; July-Aug
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 35
    facet.materialart.
    Unknown
    Nonlinear singularly perturbed optimal control problems with singular arcs (1979)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: Singular perturbation techniques are studied for dealing with singular arc problems by analyzing a relatively low-order but otherwise general system. This system encompasses many flight mechanic problems including Goddard's problem and a version of the minimum time-to-climb problem. Boundary layer solutions are constructed which are stable and reach the outer solution in a finite time. A uniformly valid composite solution is then formed from the reduced and boundary layer solutions. The value of the approximate solution is that it is relatively easy to obtain and does not involve singular arcs. To illustrate the utility of the results, the technique is used to obtain an approximate solution of a simplified version of the aircraft minimum time-to-climb problem.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 36
    facet.materialart.
    Unknown
    Assessment of airframe noise (1979)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: A component method of airframe noise prediction is used to predict levels of operational and proposed aircraft airframe noise to assess the contribution of airframe noise to community noise levels. This is done after first evaluating the prediction method using newly acquired detailed measurements from full-scale aircraft and models. In the course of the evaluation, modeling techniques of airframe noise sources are examined with attention to scaling. Finally, when used to predict approach airframe EPNLs, the levels fell about 10 EPNdB below current noise regulations and about 5 EPNdB below proposed noise regulations.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: Journal of Aircraft; 16; Dec. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 37
    facet.materialart.
    Unknown
    Examination of the flap-lag stability of rigid articulated rotor blades (1979)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: A critical examination of flap-lag stability of a centrally hinged, spring-restrained rigid blade in both hover and forward flight is presented. Several differences in the equations of motion for blade flap-lag stability in the existing literature are identified. A rigorous and systematic development of these equations for a rigid articulated blade in forward flight shows the existence of some linear aerodynamic coupling terms associated with blade steady-state flapping and lagging in the perturbation equations. The differences identified are shown to be associated with whether or not the lag hinge flaps with the blade. The implications of these differences on stability are examined, and it is shown that the pitch-lag coupling terms associated with a hinge arrangement in which the lag hinge flaps with the blade have a marked influence on flap-lag stability, depending on the system parameters.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: Journal of Aircraft; 16; Dec. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 38
    facet.materialart.
    Unknown
    Aircraft operator - Would you buy higher DOC to lower noise and fuel use (1977)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: A method of optimization of the direct operating cost (DOC) and the effective perceived noise (in units of EPNdB) in aircraft is proposed. A computer program was used to generate a variety of aircraft designs meeting certain specifications, where wing loading, aspect ratio, cruise altitude, wing sweepback, and speed was varied, and DOC for each case was calculated. The higher aspect ratio, in combination with the appropriate wing loadings, cruise altitudes and wing sweep, is found to reduce the noise and the fuel used.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: Astronautics and Aeronautics; 15; Apr. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 39
    facet.materialart.
    Unknown
    Lift/cruise fan VTOL aircraft (1977)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: The paper gives an overview of the technology related to lift/cruise fan VTOL aircraft, covering propulsion systems, thrust deflection, flight dynamics, controls, displays, aerodynamics, and configurations. Piloting problems are discussed, and the need for integration of power management and thrust-vector controls is pointed out. Major components for a high-bypass-ratio lift/cruise fan propulsion system for VTOL aircraft have been tested.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: Astronautics and Aeronautics; 15; Dec. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 40
    facet.materialart.
    Unknown
    Tilt-proprotor perspective (1977)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: The general tilt-proprotor concept is discussed, and a more detailed look at the XV-15 aircraft is taken. The special features of the two-engine system, engine control system, and flight control system are mentioned. The main objectives of the XV-15 program are to (1) verify rotor/pylon/wing/dynamic stability and aircraft performance over a representative operational envelope, (2) assess the handling qualities and establish a safe operating envelope, and (3) investigate gust sensitivity, effects of downwash, and hover operation. With regard to rotor/pylon stability, one challenge is to be able to predict a parameter's value and then build hardware to match. The analytical program has gained some respect through aeroelastic and full-scale XV-3 demonstrations. Special concern centers around the thrust and power management system when flying at high speed when very small changes in rotor collective pitch represent large changes in thrust and power. Demonstration of the system awaits wind-tunnel and flight testing.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: Astronautics and Aeronautics; 15; Dec. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 41
    facet.materialart.
    Unknown
    Remotely piloted aircraft in the civil environment (1977)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: Remotely piloted aircraft (RPA's) are of increasing interest to the military and others, as evidenced by a number of technology and development programs that are currently funded or planned. These programs have led to a number of test aircraft with significant capabilities, and future remotely piloted aircraft are forecast to become even more capable as the technology in a number of important subsystem areas is progressing at a rapid rate. As the size, weight and cost of RPA's is reduced, the prospect of using them for civilian applications becomes more likely.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: Mechanism and Machine Theory; 12; 1977
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 42
    facet.materialart.
    Unknown
    RPRV research focus on HiMAT (1976)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: A review is presented of the F-15 Remotely Piloted Research Vehicle (RPRV) project. The F-15 RPRV is air-launched from a B-52 at 50,000 ft. Following launch a series of research maneuvers are performed during an unpowered descent to a recovery altitude. Another RPRV program considered is the Highly Maneuverable Aircraft Technology (HiMAT) program. This program is designed to use RPRVs to speed the technology transition from wind tunnel to flight and to reduce the cost of aeronautical experiments. It is pointed out that HiMAT will make extensive use of composite materials.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: Astronautics and Aeronautics; 14; Apr. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 43
    facet.materialart.
    Unknown
    X-24B flight test program (1975)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The X-24B is an air launched, rocket powered research aircraft. A number of its design features constitute a tradeoff between aerodynamics and heating considerations. A vehicle description is given and test program objectives are discussed along with operational procedures and aspects of energy management. Attention is also given to X-24B handling qualities, approach and landing, wind tunnel data and simulation, and proposed X-24C vehicle requirements.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 44
    facet.materialart.
    Unknown
    A note on correlation description (1976)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The paper suggests some modifications to definitions of correlation functions made by Freeman and Bennett (1974) specifically for comparing measured quantities with those predicted by rotor theories, with reference to rotorcraft flight simulation. Special attention is paid to the quality of correlation, determined by a quality factor relating the measured and computed entities. Correlation criteria (mean load and rotor performance, overall amplitude and phase, harmonic altitude and harmonic phase) are examined, along with phase angle correlation criteria (harmonic phase defined by sine-cosine relation and harmonic phase defined by a first positive peak rotor azimuth position)
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: American Helicopter Society; vol. 21
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 45
    facet.materialart.
    Unknown
    Conceptual design of reduced energy transports (1976)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The paper reports the results of a conceptual design study of new near-term fuel-conservative aircraft. A parametric study was made to determine the effects of cruise Mach number and fuel cost on the optimum configuration characteristics and relative economic performance. Supercritical wing technology and advanced engine cycles were assumed. For each design, the wing geometry was selected to maximize an economic figure of merit which reflects the potential rate of return on investment. Based on the results of the parametric study, a reduced energy configuration was selected. Compared with existing transport design, the reduced energy design has a higher aspect ratio wing with lower sweep, and cruises at a slightly lower Mach number. It yields about 30% more seat-miles/gal than current wide-body aircraft. At the higher fuel costs anticipated in the future, the reduced energy design has about the same economic performance as existing designs with the same technology level. As an example of a far-term technology application, a design with a composite material wing was also investigated.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: Journal of Aircraft; 13; Aug. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 46
    facet.materialart.
    Unknown
    On the response of superpressure balloons to displacements from equilibrium density level (1976)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The response of a superpressure balloon to an initial displacement from its constant-density floating level is examined. An approximate solution is obtained to the governing vertical equation of motion for constant-density superpressure balloons. This solution is used to filter out neutrally buoyant oscillations in balloon records despite the nonlinear behavior of the balloon. The graph depicting the pressure data after deconvolution between the raw pressure data and the normalized balloon wavelet shows clearly the strong filtering-out of the neutral buoyancy oscillations.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: Journal of Applied Meteorology; 15; Apr. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 47
    facet.materialart.
    Unknown
    The NASA structures and materials research program for supersonic cruise aircraft (1976)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The structures and materials part of the NASA Supersonic Cruise Aircraft Research (SCAR) program is reviewed. It is pointed out that in more than three years of work significant new technology has been generated. The aircraft configurations which are efficient aerodynamically have aeroelastic problems that must be alleviated by configuration changes, active controls, or additional structural mass. An approach involving the application of advanced composite materials has the highest potential for structural weight reduction. Attention is given to the structural concepts for an arrow-wing supersonic aircraft and the techniques used in the investigations. It is expected that continuing research in SCAR structures and materials should bring high payoffs in the late 1980s.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: Astronautics and Aeronautics; 14; May 1976
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 48
    facet.materialart.
    Unknown
    High-lift aerodynamics: Trends, trades, and options (1975)
    In:  CASI
    Details
    Publication Date: 2012-05-22
    Description: The trend toward the utilization of higher maximum lift coefficient with increased aircraft size and cruise velocities is discussed. The impact of this trend on the need for tradeoffs between cruise performance and takeoff, climb, and landing performance is examined. Theoretical methods for the analysis of the two-dimensional characteristics of flap systems are described and compared with experimental data. Four powered-lift concepts are described to outline some of the options currently being developed. Two jet-flap theories are described which provide analytical methods for estimation of the three-dimensional aerodynamic high-lift performance characteristics of powered lift systems.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: AGARD Take-off and Landing; 11 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 49
    facet.materialart.
    Unknown
    Importance of helicopter dynamics to the mathematical model of the helicopter (1975)
    In:  CASI
    Details
    Publication Date: 2012-05-19
    Description: A mathematical model of the helicopter requires appropriate representation of the constituent elements of rotor dynamics. General-purpose programs that model a variety of configurations for a broad range of operating conditions result in varying and incompatible levels of sophistication. Analysis of specific dynamic problems facilitates the identification of configuration parameters which determine system behavior. For the present analysis, the nonlinear equations of a torsionally rigid hingeless rotor are linearized about an equilibrium condition to determine flap-lag stability characteristics in hover. A collocation method was used to obtain the coupled natural frequencies and modes. These modes allow exact treatment of the effect of elastic coupling which more than compensates for the destabilizing inertial coupling. The sensitivity of damping to the number of modes was found to be small, and reasonable accuracy was obtained the first flapwise and edgewise coupled modes. The range of destabilizing precone was found to be small.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: AGARD Methods for Aircraft State and Parameter Identification; 12 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 50
    facet.materialart.
    Unknown
    Investigation of interior noise in a twin-engine light aircraft (1978)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: This paper describes experimental studies of interior noise in a twin-engine, propeller-driven, light aircraft. An analytical model for this type of aircraft is also discussed. Results indicate that interior noise levels in this aircraft due to propeller noise can be reduced by reducing engine rpm at constant airspeed (about 3 dB), and by synchrophasing the twin engines/propellers (perhaps up to 12 dB). Ground tests show that the exterior noise pressure imposed on the fuselage consists of a complex combination of narrow-band harmonics due to propeller and engine exhaust sources. This noise is reduced by about 20-40 dB (depending on the frequency) by transmission through the sidewall to the cabin interior. The analytical model described uses modal methods and incorporates the flat-side geometrical and skin-stringer structural features of this light aircraft.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: Journal of Aircraft; 15; Apr. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 51
    facet.materialart.
    Unknown
    High-flying Mini-Sniffer RPV - Mars bound (1978)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: The Mini-Sniffer is a small unmanned survey aircraft developed by NASA to conduct turbulence and atmospheric pollution measurements from ground level to an altitude of 90,000 ft. Carrying a 25-lb air sampling apparatus, the Mini-Sniffer typically cruises for one hour at 70,000 ft before being remotely piloted back to earth. A hydrazine monopropellant engine powers the craft, while a PCM telemetering system and a radar transponder provide control functions. Development of a high-performance low-Reynolds-number airfoil could make the research craft suitable for a low-altitude terrain-following mission on Mars.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: Astronautics and Aeronautics; 16; June 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 52
    facet.materialart.
    Unknown
    The Quiet Short-Haul Research Aircraft /QSRA/ (1979)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: The Quiet Short-Haul Research Aircraft (QSRA), designed to expand the technology base of the upper-surface blowing propulsive-lift principle in order to establish criteria for the U.S. aircraft industry and for advanced STOL aircraft, is considered. The aircraft, which includes a three-axis, single channel, limited authority series type stability augmentation system, and a high-speed data system is described. Also discussed are STOL and acoustic performance, and handling qualities, particularly thrust effects. The QSRA has demonstrated its ability, even with the critical engine inoperative, to approach at 66 knots (wing loading of 83 lb/sq ft) and on a 9 degree glidepath; to maneuver in a 700-ft radius turn, and to land in an FAA field length of 1450 ft (over a 35-ft obstacle).
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 53
    facet.materialart.
    Unknown
    Recent V/STOL aircraft designs (1979)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: The paper reviews the V/STOL aircraft designs pursued by industry from 1971 to 1978, with emphasis on the 1975-1978 period. Consideration is given to those designs pertaining to vertical-attitude and horizontal-attitude V/STOL types. These are divided into such concepts as tilting jet engine, lift/cruise engine, lift engine, lift/cruise fan, ejector augmentor, tilt rotor, stowed rotor, and rotor wing.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: American Helicopter Society; vol. 24
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 54
    facet.materialart.
    Unknown
    Airframes and aerodynamics (1978)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: The first part of the paper discusses the Energy Efficient Transport program of the Aircraft Energy Efficiency (ACEE) program, giving attention to the development of active aerodynamics and active controls. The second part of the paper deals with two other portions of the ACEE program: Composite Primary Structures and Laminar Flow Control.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: Astronautics and Aeronautics; 16; July-Aug
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 55
    facet.materialart.
    Unknown
    Interior noise studies for general aviation types of aircraft. I - Field studies. II - Laboratory studies (1978)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: Sources of the interior noise level of typical light aircraft are identified for stationary conditions on the ground and in flight. In addition, the relationship between the exterior near- and far-field noise around an aircraft and the interior noise field is examined. The sound transmission paths of a light aircraft fuselage are investigated, and the relative effectiveness of several components of the fuselage for sound attenuation is assessed. The fuselage furnishes an acoustic attenuation of about 20 dB; windows and metallic areas appear to transmit approximately equal amounts of sound energy.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: Journal of Sound and Vibration; 58; June 8
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 56
    facet.materialart.
    Unknown
    Advanced air transport concepts (1979)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: The concepts of laminar flow control, very large all-wing aircraft, an aerial relay transportation system and alternative fuels, which would enable large improvements in fuel conservation in air transportation in the 1990's are discussed. Laminar boundary layer control through suction would greatly reduce skin friction and has been reported to reduce fuel consumption by up to 29%. Distributed load aircraft, in which all fuel and payload are carried in the wing and the fuselage is absent, permit the use of lighter construction materials and the elimination of fuselage and tail drag. Spanloader aircraft with laminar flow control could be used in an aerial relay transportation system which would employ a network of continuously flying liners supplied with fuel, cargo and crews by smaller feeder aircraft. Liquid hydrogen and methane fuels derived from coal are shown to be more weight efficient and less costly than coal-derived synthetic jet fuels.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: AIAA Student Journal; 17; Spring 1
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 57
    facet.materialart.
    Unknown
    Flying NASA's terminal configured vehicle against the microwave landing system (1979)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: Technology for advanced airborne systems and flight procedures to improve terminal-area operations in ATC environment is developed. The terminal configured vehicle (TCV) aircraft, its integrated digital electronic displays and flight controls, and how the pilot interfaces with the aircraft to fly precise curved descending approaches using Microwave Landing System (MLS) guidance are discussed.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: SETP SETP Tech. Rev., Vol. 14, No. 2; p 110-123
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 58
    facet.materialart.
    Unknown
    The Application of Recent Techniques in Flight Flutter Testing (1976)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: The relative merits of sinusoidal excitation versus random atmospheric turbulence was investigated. The randomdec and autocorrelation methods were used to analyze data from a Learjet flight test. A parameter identification digital program, using least squares approach, was developed to determine the aeroelastic characteristics of a two mode system. The flight test program, computer program, and data reduction procedure is presented. Final results of the two modes of excitation obtained by Randomdec method are discussed.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: NASA. Langley Res. Center Flutter Testing Tech.; p 395-412
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 59
    facet.materialart.
    Unknown
    Excitation by rockets (1975)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: Standard methods of excitation are not always practical when a single mode of known frequency requires investigation. This form of investigation is often required on a modified aircraft. A new method of excitation was developed and proved in flight, which consists of firing small rocket charges attached to the aircraft structure. Damping values at gradually increasing airspeeds are obtained, as in Stick Jerk tests, and flutter speeds predicted.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: NASA, Washington Flight Flutter Testing Symp.; p 61-67
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 60
    facet.materialart.
    Unknown
    A revolutionary and operational tethered aerostat system illustrating new LTA technology (1975)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: An operational tethered aerostat system, which demonstrates utility of LTA systems, is described. It was made possible by development of a reliable tethered aerostat that is used to support broadcast equipment at an altitude of 10,000 feet. Two elements of the TCOM system, the aerostat and mooring station, are particularly relevant to the LTA Workshop. They demonstrate the feasibility of using LTA vehicles in real, operational, all-weather applications and, in addition, illustrate an advance in the overall technology base of LTA. The aerostat and the mooring station, including their technical design features and demonstrated performance characteristics, are described.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: MIT Proc. of the Interagency Workshop on Lighter than Air Vehicles; p 613-622
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 61
    facet.materialart.
    Unknown
    Special problems and capabilities of high altitude lighter than air vehicles (1975)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: Powered LTA vehicles have historically been limited to operations at low altitudes. Conditions exist which may enable a remotely piloted unit to be operated at an altitude near 70,000 feet. Such systems will be launched like high altitude balloons, operate like nonrigid airships, and have mission capabilities comparable to a low altitude stationary satellite. The limited lift available and the stratospheric environment impose special requirements on power systems, hull materials and payloads. Potential nonmilitary uses of the vehicle include communications relay, environmental monitoring and ship traffic control.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: MIT Proc. of the Interagency Workshop on Lighter than Air Vehicles; p 595-603
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 62
    facet.materialart.
    Unknown
    Unmanned powered balloons (1975)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: In the late 1960's several governmental agencies sponsored efforts to develop unmanned, powered balloon systems for scientific experimentation and military operations. Some of the programs resulted in hardware and limited flight tests; others, to date, have not progressed beyond the paper study stage. Balloon system designs, materials, propulsion units and capabilities are briefly described, and critical problem areas are pointed out which require further study in order to achieve operational powered balloon systems capable of long duration flight at high altitudes.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: MIT Proc. of the Interagency Workshop on Lighter than Air Vehicles; p 585-594
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 63
    facet.materialart.
    Unknown
    Balloon logging with the inverted skyline (1975)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: There is a gap in aerial logging techniques that has to be filled. The need for a simple, safe, sizeable system has to be developed before aerial logging will become effective and accepted in the logging industry. This paper presents such a system designed on simple principles with realistic cost and ecological benefits.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: MIT Proc. of the Interagency Workshop on Lighter than Air Vehicles; p 651-666
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 64
    facet.materialart.
    Unknown
    Floating vs flying: A propulsion energy comparison (1975)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: Floating craft are compared to those that fly. Drag/weight for floaters is shown to be proportional to v squared/L, while for flyers it is independent of size and speed. The transportation market will therefore assign airships to lower speeds than airplanes, and will favor large airship sizes. Drag of an airship is shown to be only 11 percent of submarine drag at equal displacement and speed, raising the possibility that airships can compete with some types of ships.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: MIT Proc. of the Interagency Workshop on Lighter than Air Vehicles; p 187-197
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 65
    facet.materialart.
    Unknown
    Computer aided flexible envelope designs (1975)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: Computer aided design methods are presented for the design and construction of strong, lightweight structures which require complex and precise geometric definition. The first, flexible structures, is a unique system of modeling folded plate structures and space frames. It is possible to continuously vary the geometry of a space frame to produce large, clear spans with curvature. The second method deals with developable surfaces, where both folding and bending are explored with the observed constraint of available building materials, and what minimal distortion result in maximum design capability. Alternative inexpensive fabrication techniques are being developed to achieve computer defined enclosures which are extremely lightweight and mathematically highly precise.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: MIT Proc. of the Interagency Workshop on Lighter than Air Vehicles; p 209-215
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 66
    facet.materialart.
    Unknown
    The effects of selected modern technological concepts on the performance and handling characteristics of LTA vehicles (1975)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: The results of an airship design sensitivity study are presented. A wide variety of airship design concepts, including the classical and high aero-lift augmented-hybrids are examined with regard to specific technological improvements, and consequent gains in performance, stability and control and flying qualities. Variations in size, payload, power required and airspeed are quantitatively analyzed for airships representing aero-to-buoyant lift ratios of zero to 3.0 over a range of technology improvements implying reduced drag, reduced structural weight fractions and lighter, more efficient propulsion systems. Qualitatively, future airships are discussed in terms of stability, control and flying qualities requirements dictated by projected demands for vastly improved operational effectiveness and ease of handling. Such topics include stability augmentation systems, load-alleviation systems and total computer state-sensing and controls management systems. It was shown that, for the most part, highly refined conventional designs offer attractive gains in both performance and ease of handling. Hybrid airships represent a good potential for missions requiring the transport of heavy payloads at higher airspeeds over shorter ranges without the capability for sustained hover and vertical flight.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: MIT Proc. of the Interagency Workshop on Lighter than Air Vehicles; p 133-146
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 67
    facet.materialart.
    Unknown
    Reduction of trimmed drag (1975)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: Methods are reported for reducing the aircraft drag coefficient for a given aircraft lift coefficient, or speed. The emphasis is placed in determining the load distribution between the wing-body combination and the tail which reduces overall drag coefficient. Furthermore, a technique is presented which allows the determination of various aerodynamic and geometric parameters to permit the best location to satisfy inherent stability requirements. Included in the method is the calculation of sensitivity coefficients which indicate the importance of various parameters in achieving specified goals. Preliminary results indicate that such an approach is feasible.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: Kansas Univ. Proc. of the NASA, Ind., Univ., Gen. Aviation Drag Reduction Workshop; p 307-318
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 68
    facet.materialart.
    Unknown
    Some methods for reducing wing drag and wing-Nacelle interference (1975)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: Primary efforts directed toward drag reduction centered on the design of both supercritical and subcritical families of airfoils, the reduction of induced drag through the use of vortex diffusers, and the reduction of interference drag for executive-type aircraft.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: Kansas Univ. Proc. of the NASA, Ind., Univ., Gen. Aviation Drag Reduction Workshop; p 137-156
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 69
    facet.materialart.
    Unknown
    Propulsion airframe integration (1975)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: Wind tunnel simulation tests are reported that utilize a 20 inch powered nacelle for airframe integration studies. Considered are: effects of boattail positioning, nacelle size, aft fuselage drag, over-the-wing half span model installation, and turboprop and ducted fan configurations.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: Kansas Univ. Proc. of the NASA, Ind., Univ., Gen. Aviation Drag Reduction Workshop; p 387-402
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 70
    facet.materialart.
    Unknown
    Flight flutter testing the B-58 airplane (1975)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: The flight flutter tests on the B-58 airplane are described, and the philosophy of flight flutter testing is discussed. The instrumentation used in the airplane and in the telemetering receiving station on the ground is described along with the methods used for exciting the airplane and the flight test procedure. Also described is the type of data obtained and its reduction. An evaluation of the procedure and instrumentation is given with a discussion of desirable improvements for future testing.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: NASA, Washington Flight Flutter Testing Symp.; p 121-125
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 71
    facet.materialart.
    Unknown
    Ground vibration testing of complex structures (1975)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: A method of measuring separately the in-phase and quadrature components of the vibration response, designed by APL, was developed and applied. Both analysis and test results show immediately a much improved definition of mode shapes and frequencies. The approach was further developed. It allows the measurement of damping in the different natural modes, and the determination of the exact shape of the normal modes, i.e., to eliminate the coupling effect due to structural damping. It is also expected to be used in flight flutter testing.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: NASA, Washington Flight Flutter Testing Symp.; p 83-90
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 72
    facet.materialart.
    Unknown
    Simplified theoretical methods for aerodynamic design (1975)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: The objective of this paper is to describe theoretical procedures which can be utilized by the general aviation industry for aerodynamic design. Discussed are the design process and theoretical methods used to design a wing. Then theoretical methods for estimating the interference velocities due to fuselage, or other bodies, and nacelles are elaborated. It is assumed that flow fields due to different components can be superimposed, and then the pressure coefficients computed from the Bernoulli equation. Methods to estimate the induced, viscous form, and compressible drags are also discussed. In addition, a procedure for modifying the surface contours to reduce adverse pressure distributions induced by component interference is detailed.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: Kansas Univ. Proc. of the NASA, Ind., Univ., Gen. Aviation Drag Reduction Workshop; p 61-76
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 73
    facet.materialart.
    Unknown
    Transient flight flutter test of a wing with tip tanks (1975)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: Wing flutter was encountered during flight testing of the F2H-2 airplane with full wing tip tanks. As a result, more refined theoretical analysis as well as flight flutter tests were initated to establish corrective measures and to experimentally verify the stability of the improved system. The results from the flight flutter tests, utilizing the transient response technique, are presented. The method of excitation consisted of abrupt deflections of the ailerons resulting from stick bangs and data were measured by wing tip accelerometers. A comparison of the results with theoretical predictions is presented and indicates that reasonably good correlation was obtained. The influence on wing flutter of tip tank fuel transfer cycle, which was incorporated to control the center of gravity range of the tank during defueling, is indicated by the measured results and compared with the theory. The final configuration utilized a transfer cycle which was proven stable as a result of flight flutter testing. It is concluded that transient response measurements resulting from stick bangs provide a reasonably reliable and safe technique of flight flutter testing for wings with external tanks or heavy stores.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: NASA, Washington Flight Flutter Testing Symp.; p 97-102
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 74
    facet.materialart.
    Unknown
    Flight flutter testing using pulse techniques (1975)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: A case of flutter developed at a speed lower than had been flown previously. This incident precipitated the routine procedure of pulsing control surfaces as well as the firing of explosive charges during speed build-ups. In the interest of rapid evaluation of results, simple methods of data reduction were used. A case history is presented where in the pulse technique predicted flutter by extrapolating decay rates obtained at subcritical speeds; in addition, a case is presented where no valid extrapolation could be made.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: NASA, Washington Flight Flutter Testing Symp.; p 69-72
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 75
    facet.materialart.
    Unknown
    The application of measurement techniques to track flutter testing (1975)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: The application is discussed of measurement techniques to captive flight flutter tests at the Supersonic Naval Ordnance Research Track (SNORT), U. S. Naval Ordnance Test Station, China Lake, California. The high-speed track, by its ability to prove the validity of design and to accurately determine the actual margin of safety, offers a unique method of flutter testing for the aircraft design engineer.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: NASA, Washington Flight Flutter Testing Symp.; p 51-59
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 76
    facet.materialart.
    Unknown
    On the prediction of critical flutter conditions from subcritical response data and some related wind-tunnel experience (1975)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: Methods of interpreting response measurements which could be amenable to flight flutter testing procedures were studied analytically and in the wind tunnel. One suggested scheme, which requires evaluation, is an iterative technique in which derivatives obtained from subcritical response data are used to indicate the approach to flutter. A simplification of this procedure was considered by examining the manner in which a single characteristic of the subcritical response behaves in relation to variations of the density or dynamic pressure in the approach to flutter. The use of this single parameter scheme was examined for random excitation as well as for sinusoidal forcing. The feasibility of the method is illustrated by several examples and the relative merits of random and sinusoidal excitation are discussed.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: Flight Flutter Testing Symp.; p 23-29
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 77
    facet.materialart.
    Unknown
    A theory of flight flutter testing (1975)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: Flight flutter testing is considered as a method for finding generalized aerodynamic forces. The coefficients determined from flight flutter tests are used in flutter calculations, using a simple expansion in frequency and Mach number. The errors in the procedure are discussed, and expressions for the error in flutter prediction are given. Methods of testing procedure are discussed.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: NASA, Washington Flight Flutter Testing Symp.; p 3-6
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 78
    facet.materialart.
    Unknown
    Flight flutter testing of multi-jet aircraft (1975)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: Extensive flight flutter tests were conducted by BAC on B-52 and KC-135 prototype airplanes. The need for and importance of these flight flutter programs to Boeing airplane design are discussed. Basic concepts of flight flutter testing of multi-jet aircraft and analysis of the test data will be presented. Exciter equipment and instrumentation employed in these tests will be discussed.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: NASA, Washington Flight Flutter Testing Symp.; p 103-110
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 79
    facet.materialart.
    Unknown
    Stabilizer flutter investigated by flight test (1975)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: Flight flutter tests were conducted on an experimental airplane which resulted in the successful prediction of a limited amplitude stabilizer flutter at supersonic speeds. The flutter obtained was unusual in that fore and aft bending of the stabilizer carry-through structure contributed to the flutter condition. During flight tests the impending flutter condition was observed from force per unit amplitude, damping coefficient, and frequency measurements. A description is given of the physical and operational characteristics of the test equipment and telemetering facilities. A flutter analysis using measured modes and incompressible two-dimensional strip air forces yielded a conservative flutter speed. Sled tests of a similar stabilizer configuration had lead to the conclusion that flutter would not be encountered. Certain overall conclusions are reached regarding this particular flight flutter testing program and the need for a concerted research effort in this field.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: NASA, Washington Flight Flutter Testing Symp.; p 73-81
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 80
    facet.materialart.
    Unknown
    A general aerodynamic approach to the problem of decaying or growing vibrations of thin, flexible wings with supersonic leading and trailing edges and no side edges (1975)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: Indicial aerodynamic influence coefficients were evaluated from potential theory for a thin, flexible wing with supersonic leading and trailing edges only. The analysis is based on the use of small surface areas in which the downwash is assumed uniform. Within this limitation, the results are exact except for the restriction of linearized theory. The areas are not restricted either to square boxes or Mach boxes. A given area may be any rectangle or square which may or may not be cut by the Mach forecone, and any area can be used anywhere in the forecone without loss of accuracy.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: Flight Flutter Testing Symp.; p 7-12
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 81
    facet.materialart.
    Unknown
    Studies of advanced transport aircraft (1978)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: Several concepts for possible future airplanes, including all-wing distributed-load airplanes, multibody airplanes, a long-range laminar flow control airplane, a nuclear-powered airplane designed for towing conventionally powered airplanes during long-range cruise, and an aerial transportation system comprised of continuously flying liner airplanes operated in conjunction with short-range feeder airplanes are described. Performance and economic advantages of each concept are indicated. Further research is recommended in the following areas: all-wing airplane aerodynamics, aerial rendezvous, nuclear aircraft engines, air-cushion landing systems, and laminar flow control, as well as the basic research discipline areas of aerodynamics, structures, propulsion, avionics, and computer applications.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: CTOL Transport Technol., 1978; p 951-982
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 82
    facet.materialart.
    Unknown
    Progress in supersonic cruise aircraft technology (1978)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: The supersonic cruise aircraft research program identified significant improvements in the technology areas of propulsion, aerodynamics, structures, takeoff and landing procedures, and advanced configuration concepts. Application of these technology areas to a commercial aircraft is discussed. An advanced SST family of aircraft which may be environmentally acceptable, have flexible range-payload capability, and be economically viable is projected.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: CTOL Transport Technol., 1978; p 909-925
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 83
    facet.materialart.
    Unknown
    Short-haul CTOL aircraft research (1978)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: The results of the reduced energy for commercial air transportation studies on air transportation energy efficiency improvement alternatives are reviewed along with subsequent design studies of advanced turboprop powered transport aircraft. The application of this research to short-haul transportation is discussed. The results of several recent turboprop aircraft design are included. The potential fuel savings and cost savings for advanced turboprop aircraft appear substantial, particularly at shorter ranges.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: NASA. Langley Res. Center CTOL Transport Technol., 1978; p 891-908
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 84
    facet.materialart.
    Unknown
    Flight experiments to improve terminal area operations (1978)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: A brief description is given of the objectives and activities of the terminal configured vehicle (TCV) program and of some of the airborne facilities. A short analysis of some particular problems in CTOL operations in the terminal area is also presented to show how the program's technical objectives are related to the defined problems. The test aircraft was flown both manually and automatically with manual monitoring over paths including 130 deg intercepts and 2.0 km and 0.8 km finals. Some statistical data are presented from these and other flight profiles designed to address specific terminal area problems. An overview is presented of research studies receiving emphasis in the next biennium and their application to the terminal area. A description of work undertaken to study the addition of adjacent traffic information to present map displays is also given.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: CTOL Transport Technol., 1978; p 819-847
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 85
    facet.materialart.
    Unknown
    Summary of NASA landing-gear research (1978)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: Research relative to tire tread, powered-wheel taxiing, air cushion landing systems, and crosswind landing gear is discussed.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: CTOL Transport Technol., 1978; p 773-804
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 86
    facet.materialart.
    Unknown
    Development and flight evaluation of active controls in the L-1011 (1978)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: Active controls in the Lockheed L-1011 for increased energy efficiency are discussed. Active wing load alleviation for extended span, increased aspect ratio, and active stability augmentation with a smaller tail for reduced drag and weight are among the topics considered. Flight tests of active wing load alleviation on the baseline aircraft and moving-base piloted simulation developing criteria for stability augmentation are described.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: NASA. Langley Res. Center CTOL Transport Technol., 1978; p 647-685
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 87
    facet.materialart.
    Unknown
    Experimental Results of Winglets on First, Second, and Third Generation Jet Transports (1978)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: Results of wind tunnel investigations of four jet transport configurations representing both narrow and wide-body configurations and also a future advanced aerodynamic configuration are presented including performance and wing root bending moment data. The effects of winglets on the aerodynamic characteristics throughout the flight envelope were studied. The results indicate that winglets improved the cruise lift to drag ratio between 4 and 8 percent, depending on the transport configuration. The data also indicate that ratios of relative aerodynamic gain to relative structural weight penalty for winglets are 1.5 to 2.5 times those for wing-tip extensions. Over the complete range of flight conditions, winglets produce no adverse effects on buffet onset, lateral-directional stability, and aileron control effectiveness.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: CTOL Transport Technol., 1978; p 553-569
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 88
    facet.materialart.
    Unknown
    Application of porous materials for laminar flow control (1978)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: Fairly smooth porous materials were elected for study Doweave; Fibermetal; Dynapore; and perforated titanium sheet. Factors examined include: surface smoothness; suction characteristics; porosity; surface impact resistance; and strain compatibility. A laminar flow control suction glove arrangement was identified with material combinations compatible with thermal expansion and structural strain.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: NASA. Langley Res. Center CTOL Transport Technol., 1978; p 497-522
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 89
    facet.materialart.
    Unknown
    Application of Laminar Flow Control Technology to Long-Range Transport Design (1978)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: The impact of laminar flow control (LFC) technology on aircraft structural design concepts and systems was discussed and the corresponding benefits were shown in terms of performance and fuel economy. Specific topics discussed include: (1) recent advances in laminar boundary layer development and stability analysis techniques in terms of suction requirements and wing suction surface design; (2) validation of theory and realistic simulation of disturbances and off-design conditions by wind tunnel testing; (3) compatibility of aerodynamic design of airfoils and wings with LFC requirements; (4) structural alternatives involving advanced alloys or composites in combinations made possible by advanced materials processing and manufacturing techniques; (5) addition of suction compressor and drive units and their location on the aircraft; and (6) problems associated with operation of LFC aircraft, including accumulation of insects at low altitudes and environmental considerations.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: NASA. Langley Res. Center CTOL Transport Technol., 1978; p 409-447
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 90
    facet.materialart.
    Unknown
    Design of a laminar-flow-control supercritical airfoil for a swept wing (1978)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: An airfoil was analytically designed and analyzed for a combination of supercritical flow and laminar flow control (LFC) by boundary layer suction. A shockless inverse method was used to design an airfoil and an analysis method was used in lower surface redesign work. The laminar flow pressure distributions were computed without a boundary layer under the assumption that the laminar boundary layer would be kept thin by suction. Inviscid calculations showed that this 13.5 percent thick airfoil has shockless flows for conditions at and below the design normal Mach number of 0.73 and the design section lift coefficient of 0.60, and that the maximum local normal Mach number is 1.12 at the design point. The laminar boundary layer instabilities can be controlled with suction but the undercut leading edge of the airfoil provides a low velocity, constant pressure coefficients region which is conducive to laminar flow without suction. The airfoil was designed to be capable of lift recovery with no suction by the deflection of a small trailing edge flap.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: CTOL Transport Technol., 1978; p 395-408
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 91
    facet.materialart.
    Unknown
    Flight investigation of insect contamination and its alleviation (1978)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: An investigation of leading edge contamination by insects was conducted with a JetStar airplane instrumented to detect transition on the outboard leading edge flap and equipped with a system to spray the leading edge in flight. The results of airline type flights with the JetStar indicated that insects can contaminate the leading edge during takeoff and climbout. The results also showed that the insects collected on the leading edges at 180 knots did not erode at cruise conditions for a laminar flow control airplane and caused premature transition of the laminar boundary layer. None of the superslick and hydrophobic surfaces tested showed any significant advantages in alleviating the insect contamination problem. While there may be other solutions to the insect contamination problem, the results of these tests with a spray system showed that a continouous water spray while encountering the insects is effective in preventing insect contamination of the leading edges.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: CTOL Transport Technol., 1978; p 357-373
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 92
    facet.materialart.
    Unknown
    Transition from glass to graphite in manufacture of composite aircraft structure (1978)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: The transition from fiberglass reinforced plastic composites to graphite reinforced plastic composites is described. Structural fiberglass design and manufacturing background are summarized. How this experience provides a technology base for moving into graphite composite secondary structure and then to composite primary structure is considered. The technical requirements that must be fulfilled in the transition from glass to graphite composite structure are also included.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: NASA. Langley Res. Center CTOL Transport Technol., 1978; p 331-347
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 93
    facet.materialart.
    Unknown
    Advanced structural sizing methodology (1978)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: Research in computerized structural sizing technology was reviewed. Areas covered include: overall design; structural subassembly design; thermal structures; and stiffened panels. In each case, sample results are presented.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: CTOL Transport Technol., 1978; p 311-330
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 94
    facet.materialart.
    Unknown
    Key issues in application of composites to transport aircraft (1978)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: The application of composite materials to transport aircraft was identified and reviewed including the major contributing disciplines of design, manufacturing, and processing. Factors considered include: crashworthiness considerations (structural integrity, postcrash fires, and structural fusing), electrical/avionics subsystems integration, lightning, and P-static protection design; manufacturing development, evaluation, selection, and refining of tooling and curing procedures; and major joint design considerations. Development of the DC-10 rudder, DC-10 vertical stabilizer, and the DC-9 wing study project was reviewed. The Federal Aviation Administration interface and the effect on component design of compliance with Federal Aviation Regulation 25 Composite Guidelines are discussed.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: NASA. Langley Res. Center CTOL Transport Technol., 1978; p 281-310
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 95
    facet.materialart.
    Unknown
    Flight Flutter Testing of Supersonic Interceptors (1975)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: A summary is presented of experiences in connection with flight flutter testing of supersonic interceptors. The planning and operational aspects involved are described along with the difficulties encountered, and the correlation between measurement and theory. Recommendations for future research and development to advance the science of flight flutter testing are included.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: NASA, Washington Flight Flutter Testing Symp.; p 111-120
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 96
    facet.materialart.
    Unknown
    In-flight damping measurement (1975)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: A new testing technique is described which can be applied in determining the damping coefficient of the critical vibration modes of an airplane in flight. The damping coefficient can be determined in several different ways from the same data using different features of a modified response curve which implies the possibility of checking one value against the other. The method introduces the effect of sweep rate in the driving system. This effect on the frequency response curve of the critical vibration mode and its various characteristics are used in the determination of damping coefficient. A theoretical examination is made of these characteristics for single degree of freedom systems.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: NASA, Washington Flight Flutter Testing Symp.; p 13-21
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 97
    facet.materialart.
    Unknown
    Two lighter than air systems in opposing flight regimes: An unmanned short haul, heavy load transport balloon and a manned, light payload airship (1975)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: Lighter Than Air vehicles are generally defined or categorized by the shape of the balloon, payload capacity and operational flight regime. Two balloon systems that are classed as being in opposite categories are described. One is a cable guided, helium filled, short haul, heavy load transport Lighter Than Air system with a natural shaped envelope. The other is a manned, aerodynamic shaped airship which utilizes hot air as the buoyancy medium and is in the light payload class. While the airship is in the design/fabrication phase with flight tests scheduled for the latter part of 1974, the transport balloon system has been operational for some eight years.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: MIT Proc. of the Interagency Workshop on Lighter than Air Vehicles; p 637-650
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 98
    facet.materialart.
    Unknown
    The variable density aircraft concept (1975)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: In the variable density aircraft concept the aircraft's density is varied by varying its volume. This is accomplished by combining a variable volume hull, which is called the dynapod, with intrinsic means for the controlled variation of a mass of working fluid or substance within the aircraft. The dynapod is a hinged structure and follows the volumetric variations of the working fluid. The result is a variable density hull, which with the attachment of power plants, etc., becomes a variable density aircraft.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: MIT Proc. of the Interagency Workshop on Lighter than Air Vehicles; p 477-483
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 99
    facet.materialart.
    Unknown
    The Dynairship (1975)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: A feasibility analysis for the construction and use of a combination airplane-airship named 'Dynairship' is undertaken. Payload capacities, fuel consumption, and the structural design of the craft are discussed and compared to a conventional commercial aircraft (a Boeing 747). Cost estimates of construction and operation of the craft are also discussed. The various uses of the craft are examined (i.e, in police work, materials handling, and ocean surveillance), and aerodynamic configurations and photographs are shown.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: MIT Proc. of the Interagency Workshop on Lighter than Air Vehicles; p 441-455
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 100
    facet.materialart.
    Unknown
    A LTA flight research vehicle (1975)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: An Airship Flight Research Program is proposed. Major program objectives are summarized and a Modernized Navy ZPG3W Airship recommended as the flight test vehicle. The origin of the current interest in modern airship vehicles is briefly discussed and the major benefits resulting from the flight research program described. Airship configurations and specifications are included.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: MIT Proc. of the Interagency Workshop on Lighter than Air Vehicles; p 395-404
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
Close ⊗
This website uses cookies and the analysis tool Matomo. More information can be found here...