ALBERT

Description: In many structures the final stress states are dependent on the sequence of construction or the stress states at various stages of construction are of interest. Such problems can be analyzed using finite element programs that have the capability of adding (birthing) elements to simulate the progress of construction. However, the usual procedure of assembling elements may lead to numerical instabilities or stress states that are unrealistic. Both problems are demonstrated in the analysis of a structure using the program ADINA. A technique which combines application of a preload with element birthing to overcome these problems is described and illustrated.

Description: A technique utilizing finite element analysis, liquid impact kinematics, and momentum theory is described and compared to single-drop impact test data performed on various configurations of coated ceramic material. The method correlates well with test data and is useful in predicting the single-drop impact damage velocity threshold for low-density, coated ceramic materials.

Description: An algorithm is outlined for simulating the contact surface erosion for impact problems. The algorithm dynamically relocates the contact surface as projectile and target materials exceed their failure criterion. Example computations of axisymmetric and oblique impacts are compared with experimental data.

Description: A study of the dynamic characteristics of a coupled translational-rotational system is given. The formulation of the problem considers the soil-structure interaction effects by utilizing the impedance functions at the foundation of a structure. Due to the fact that the coefficient matrix in the characteristic equation is frequency dependent in nature, iterations have to be performed to find the nature frequencies of the system. Examples and discussions are presented. Comparisons of the analytical results from various approaches are also given.

Description: Two analytical techniques applicable to large deflection dynamic response calculations for pressure loaded composite sandwich panels are demonstrated. One technique utilizes finite element modeling with a single equivalent layer representing the face sheets and core. The other technique utilizes the modal analysis computer code DEPROP which was recently modified to include transverse shear deformation in a core layer. The example problem consists of a simply supported rectangular sandwich panel. Included are comparisons of linear and nonlinear static response calculations, in addition to dynamic response calculations.

Description: The design of thin shell structures with respect to elastoplastic buckling requires an extended analysis of the influence of initial imperfections. For conservative design, the most critical defect should be assumed with the maximum allowable magnitude. This defect is closely related to the initial postbuckling behavior. An algorithm is given for the quasi-static analysis of the postbuckling behavior of structures that exhibit multiple buckling points. the algorithm based upon an energy criterion allows the computation of the critical perturbation which will be employed for the definition of the critical defect. For computational efficiency, the algorithm uses the reduced basis technique with automatic update of the modal basis. The method is applied to the axisymmetric buckling of cylindrical shells under axial compression, and conclusions are given for future research.

Description: A general approach is required for describing matter of behavior when the failure is likely to involve growth and coalescence of a large number of fractures. Failures of this kind appear frequently in rapid dynamic processes, particularly in the formation of spall fragments. An approach to formulating constitutive relations that accounts for the opening, shear and growth of an ensemble of cracks is discussed. The approach accounts for plastic flow accompanying fragmentation. The resulting constitutive relations were incorporated into a Lagrangian computer program. A theoretical approach to coalescence is described. The simplest formulation uses a linear Liouville equation, with crack growth limited by the mean free path of cracks, assumed constant. This approach allows for an anisotropic distribution of cracks. An alternative approach in which the decrease of the mean free path with increasing crack size is accounted for, but the crack distribution is assumed isotropic is described. A reduction of the governing Liouville equation to an ordinary differential equation of third order is possible, and the result can be used to determine how mean free path decreases with increasing crack size.

Description: The design of a composite panel requires some way of finding the minimum thickness laminate which will withstand the load requirements without failure. The mathematical complexity of this problem dictates the use of nonlinear optimization techniques. Specialized laminate optimization programs were developed which are compact and efficient enough to run on microcomputers. Only stresses at a point and inplane loads and deflections are considered. The programs are simple to use and require no knowledge of optimization. Techniques are developed which find minimum thickness laminates with either ply ratios or ply angles as design variables. A method is presented for finding the optimum orientation for the axis of symmetry of an orthotropic laminate. The orthotropic laminate program uses an approximate failure theory, which speed up computations dramatically.

Description: The evaluation of the total probability of a plastic collapse failure P sub f for a highly redundant structure of random interdependent plastic moments acted on by random interdepedent loads is a difficult and computationally very costly process. The evaluation of reasonable bounds to this probability requires the use of second moment algebra which involves man statistical parameters. A computer program which selects the best strategy for minimizing the interval between upper and lower bounds of P sub f is now in its final stage of development. The relative importance of various uncertainties involved in the computational process on the resulting bounds of P sub f, sensitivity is analyzed. Response sensitivities for both mode and system reliability of an ideal plastic portal frame are shown.

Description: A finite element modeling technique which utilizes a triangular element called TSHEL with 45 degrees of freedom and seven point integration was tested for analysis of thin plate and shell structures. The element formulation is based on the degenerate solid shell concept and the mixed formulation with assumed independent inplane and transverse shear strains. The effectiveness of the present modeling technique which features combined use of elements with kinematic modes and those without kinematic modes to eliminate both locking and spurious kinematic modes at the global structural levels are shown.

Description: The stress derivative technique for control of keystoning deformation in under-integrated finte elements is based on expansion of the stress in a Taylor series about the element center and retention of additional terms beyond the constant stress term. It has the advantage over other control techniques that keystoning resistance is provided by actual rather than artificial material properties. Application of this technique to the quadrilateral ring elements used for modelling solids of revolution subjected to axisymmetric loads is described. In a cylindrical coordinate system additional terms appear in the formulation which must be dealt with in arriving at a workable keystoning control scheme.

Description: An existing program is currently being adapted to perform finite element analysis by distributing substructures over a network of four Apple IIe microcomputers connected to a shared disk. In this network, one microcomputer controls the entire process while the others perform the analysis on each substructure in parallel. This substructure analysis is used in an iterative, fully stressed, structural resizing procedure. This procedure allows experimentatation with resizing in which all analyses are not completed during a single iteration. This research gives some insight on how to configure multidiscriplinary analysis and optimization procedures for decomposable engineering systems using either high performance engineering workstations or a parallel processor supercomputer. In addition, the operational experience gained facilitates the implementation of analysis programs on these new computers when they become available in an engineering environment.

Description: Described are the experiences gained from solving for the dynamic response of two simple structures on an experimental Multiple Instruction Multiple Data (MIMD) computer called the finite element machine. Introduced are MIMD computing concepts, describing how the concurrent algorithmic techniques implemented and giving results for the two example problems. The results show computational speedups of up to 7.83 using eight of the finite element machine processors and indicate that significant computational speedups are possible for large order structural computations.

Description: The FLEX/32 Multicomputer is a generic environment for cooperating multiple processors. The FLEX/32 supports a number of different processors, making it heterogeneous in terms of the instruction sets it supports, and homogeneous in its ability to provide consistent storage and input/output facilities to its differing processors. These facilities are accessed through standard 32-bit VMEbus connections. The FLEX/32 supports the full UNIX System V Operating System and languages associated with it, plus the extended ConCurrent C and Concurrent FORTRAN 77 languages that allow programming of concurrent software at a high level. Direct programming support at all levels is provided by the environment hardware for concurrent software execution and optimization, including hardware support for shared resource access arbitration, conditional critical region arbitration, and interprocessor messages.

Description: Research aimed at faster, more cost effective parallel machines and algorithms for improving designer productivity with finite element computations is discussed. A set of 8 boards, containing 4 nearest neighbor connected arrays of commercially available floating point chips and substantial memory, are inserted into a commercially available machine. One-tenth Mflop (64 bit operation) processors provide an 89% efficiency when solving the equations arising in a finite element problem for a single variable regular grid of size 40 by 40 by 40. This is approximately 15 to 20 times faster than a much more expensive machine such as a VAX 11/780 used in double precision. The efficiency falls off as faster or more processors are envisaged because communication times become dominant. A novel successive overrelaxation algorithm which uses cyclic reduction in order to permit data transfer and computation to overlap in time is proposed.

Description: Background information and exercises are provided to: (1) establish or expand understanding of the concepts, methods, and terminology of computer processing of image producing data; (2) develop insight into the advantages of computer based image processing compared with the photointerpretation approach for processing, classifying, interpreting, and applying remote sensing data; (3) foster a broad perspective on the principal of the main techniques for image enhancement, pattern recognition, and thematic classification; (4) appreciate the pros and cons of batch and interactive modes of image analysis; (5) examine and evaluate some specific computer generated products for subscenes in Pennsylvania and New Jersey; and (6) interrelate these particular examples of output with more theoretical explanations of computer processing strategies and procedures.

Description: The High Resoltuion Spectrograph (HRS) in conjunction with the Space Telescope (ST), extends ultraviolet astronomical spectroscopy to higher spectra, spatial, and time resolutions than previously achieved, as well as to fainter and more distant celestial objects. Other significant advances inherent in the instrument are high photometric accuracy and efficient operation via exposure meter control and real time rejection of bad data. These capabilities are provided to accomplish the scientific programs of the HRS investigation definition team, which concern the interstellar medium, stellar winds, and evolutionary aspects of stellar atmosphere studies; the determination of chemical abundances relevant to stellar evolution; the investigation of quasars and Seyfert galaxy nuclei; and the analysis of the atmospheres of solar system objects, including comets.

Description: Isolated knobs that are erosional remnants of central volcanoes or of folded rocks occur in several areas of the Altiplano are visible on both optical and images. The optically visible streaks occur in the immediate lee of the knobs, whereas the radar visible streaks occur in the zone downwind between the knobs. Aerial reconnaissance and field studies showed that the optically visible streaks consist of a series of small ( 100 m wide) barchan and barchanoid dunes, intradune sand sheets, and sand hummocks (large shrub coppice dunes) up to 15 m across and 5 m high. On LANDSAT images these features are poorly resolved but combine to form a bright streak. On the radar image, this area also appears brighter than the zone of the radar dark streak; evidently, the dunes and hummocks serve as radar reflectors. The radar dark streak consists of a relatively flat, smooth sand sheet which lacks organized aerolian bedforms, other than occasional ripples. Wind velocity profiles show a greater U value in the optically bright streak zone than in the radar dark streak.

Description: The diversity of proposed origins for large Martian outflow channels results from the differing interpretations given to the landforms associated with the outflow channels. In an attempt to help limit the possible mechanisms of channel erosion, detailed studies of three of the channel features were done; the streamlined islands, longitudinal grooves and scour marks. This examination involved a comparison of the martian streamlined islands with various streamlined landforms on Earth including those found in the Channel Scabland in large rivers, glacial drumlins, and desert yardangs. The comparisons included statistical analyses of the landform lengths versus widths and positions of maximum width, and an examination of the degree of shape agreement with the geometric lemniscate which was in turn demonstrated to correspond closely with true airfoil shapes. The analyses showed that the shapes of the martian islands correspond closely to the streamlined islands in rivers and the Channel Scabland land. Drumlins show a much smaller correlation. Erosional rock islands formed by glaciers are very much different in shape.

Description: The design, manufacture, and testing of an isolation system placed under a bench which simulates a space platform during testing in a hard vacuum are described. A low natural frequency isolation system is used to decouple ground vibrations from the bench. The materials used are vacuum compatible and do not introduce unwanted matter which would contaminate the payload optics and/or the testing environment. The system accommodates payloads of varying weights and envelopes.

Description: The potential cost and performance advantages of welding was understood but ignored by solar panel manufacturers in the U.S. Although NASA, DOD and COMSAT have supported welding development efforts, soldering remains the only U.S. space qualified method for interconnecting solar cells. The reason is that no U.S. satellite prime contractor found it necessary, due to mission requirements, to abandon the space proven soldering process. It appears that the proposed NASA space station program will provide an array requirement, a 10 year operation in a low Earth orbital environment, that mandates welding. The status of welding technology in the U.S. is assessed.

Description: An intelligent subsystem for interfacing a PDS1010A digital microdensitometer to a DEC DR11W DMA 16 bit UNIBUS port in DEC VAX VMS environment was tested. The subsystem employs two MOTOROLA M68000 microprocessors with 128 KB data memory. The PDS primitives and the user defined high level scanning functions and preprocessing modules are loaded from the host computer into two 8 KB RAM memories in the microprocessors using a dedicated PDS control language. The subsystem is planned to employ a nonstandard photomultiplier electronics. Two design schemes were tested: (1) based on three amplifiers of gain 10 cascaded and multiplexed to a 12 bit AD converter, and (2) based on a single amplifier of gain 100 and two 14 bit AD converters.

Description: The significance of the Space Telescope for the advancement of astronomy and astrophysics is described. The current state of knowledge in astronomy and cosmology is summarized and unanswered questions in those fields discussed. The rapid evolution of modern astronomy and the need for systematic observations are stressed.

Description: Astrometry with the Space Telescope (ST) is performed using one of the fine guidance sensors (FGS). The FGS, which is based on a pair of Koester's prism interferometers, one for each axis, is capable of measuring the position of one object relative to another with an accuracy of 0.002 arcseconds. Astrometric Data Reduction Software (ADRS) available to the astrometric user of ST is described. The kinds of problems the space telescope astrometry team plans to investigate using ST are discussed.

Description: A wide site of potential astronomical and solar system scientific studies using the wide field planetary camera on space telescope are described. The expected performance of the camera as it approaches final assembly and testing is also detailed.

Description: The role of the European Coordinating Facility is described. European participation in the Space Telescope Science Institute and the relation of Space Telescope to ground-based astronomy in Europe are discussed.

Description: The joint airport weather studies (JAWS) project is discussed. The major objectives of the JAWS Project are a fundamental description of the phenomenon, a determination of the hazard potential and a definition of a protection and warning system, all of which are relative to low level wind shear. Aspects of the low level wind shear phenomenon. The principal focus, however, is the microburst. The microburst is fundamentally a rather simple atmospheric flow. It is a downdraft that, upon approaching the surface, spreads out horizontally, producing a diverging radial flow in all directions. For any direction that an aircraft flies through the microburst, it will first encounter increasing head winds; then the remnants of the downdraft; and then, increasing tail wind.

Description: A heavily instrumented F-106B aircraft was flown in thunderstorms to gather data for characterizing lightning at aircraft operating altitudes. Conventional weather finding techniques are supplemented with UHF lightning mapping radar to select the most active storm cells and the most likely altitude for obtaining direct lightning strikes to the airplane. One hundred seventy-six strikes were obtained in a 3 year period, mostly at an altitude of above 25,000 feet.

Description: A wind shear and vortex wake and their impact on aircraft were investigated. The systems and advice to help pilots, and rational scientific methods to assist in advising certification authorities and those interested in improving flight safety were developed. Wind Shear and Vortex Wakes are related, they are both invisible enemies of aircraft in the form of large disturbances in the atmosphere, both cause major accidents. Problems of building wakes at airports are is considered. Research on wind shear was initiated by the American FAA following the Boston, New York and Denver accidents to civil airliners. This resulted in: useful advice to pilots about wind shear; better attempts by the meteorologists at forecasting wind shear conditions; and useful ideas for wind shear measurement and warning systems. Three major research tasks are outstanding: (1) Worldwide measurements to give reliable estimates of probability and details of the forms of large wind shears; (2) Developments of real time wind shear measuring systems for ground or airborne use; and (3) Establishing relationships between measured wind shear and the potential hazard to an aircraft, or class of aircraft.

Description: Marked surface inversions occur most frequently in dry continental climates, where low atmospheric humidity allows heat transfer by long wave thermal radiation. In the northern latitudes, surface inversions reach their maximum intensity during the winter, when the incoming Sun's radiation is negligible and radiative cooling is dominant during the long nights. During winter, air mass boundaries are sharp, which causes formation of marked surface inversions. The existence of these inversions and sharp boundaries increase the risk of wind shear. The information should refer to marked inversions exceeding a temperature difference of 10 deg C up to 1000 feet. The need to determine the temperature range over which he information is operationally needed and the magnitude of the inversion required before a notification to pilots prior to departure is warranted are outlined.

Description: The Gust Gradient Program is a data intensive effort involving tripple Doppler radar, a surface weather station mesonet and other aircraft. The Joint Airport Weather Studies was utilized to gain additional data. The data were used to fill in the gap in turbulence modeling.

Description: The objective of the Generalized Exponential Markov (GEM) Program was to develop a weather forecast guidance system that would: predict between 0 to 6 hours all elements in the airways observations; respond instantly to the latest observed conditions of the surface weather; process these observations at local sites on minicomputing equipment; exceed the accuracy of current persistence predictions at the shortest prediction of one hour and beyond; exceed the accuracy of current forecast model output statistics inside eight hours; and be capable of making predictions at one location for all locations where weather information is available.

Description: Recommendations based on need, cost, and achievement of flight safety are offered, and the re-evaluation of weather parameters needed for safe landing operations that lead to reliable and consistent automated observation capabilities are considered.

Description: The primary responsibilities of the National Weather Service (NWS) are to: provide warnings of severe weather and flooding for the protection of life and property; provide public forecasts for land and adjacent ocean areas for planning and operation; and provide weather support for: production of food and fiber; management of water resources; production, distribution and use of energy; and efficient and safe air operations.

Description: The implementation of the National Airspace System (NAS) will improve safety services to aviation. These services include collision avoidance, improved landing systems and better weather data acquisition and dissemination. The program to improve the quality of weather information includes the following: Radar Remote Weather Display System; Flight Service Automation System; Automatic Weather Observation System; Center Weather Processor, and Next Generation Weather Radar Development.

Description: Solid rocket booster cavity collapse flight measurements included external pressures on the motor case and aft skirt, internal motor case pressures, accelerometers located in the forward skirt, mid-body area, and aft skirt, as well as strain gages located on the skin of the motor case. This flight data yielded applied pressure longitudinal and circumferential distributions which compare well with model test predictions. The internal motor case ullage pressure, which is below atmospheric due to the rapid cooling of the hot internal gas, was more severe (lower) than anticipated due to the ullage gas being hotter than predicted. The structural dynamic response characteristics were as expected. Structural ring and wall damage are detailed and are considered to be attributable to the direct application of cavity collapse pressure combined with the structurally destabilizing, low internal motor case pressure.

Description: Rainfall characteristics using data from dense recording raingage networks is reviewed. Data from such networks have quantified temporal and spatial rainfall distributions, and have supplied specialized information about local and orographic effects. The natural variability, temporally and spatially, for annual, seasonal, monthly, and individual events is treated. Especially important are the spatial variations of precipitation as a function of synoptic type, precipitation type, amount, and duration. Results from dense raingage networks in Illinois, and some data from other climatic regions is also treated.

Description: A 10 channel scanning radiometer, built as a prototype for the coastal zone color scanner on the Nimbus 7 satellite, was flown on a high altitude aircraft during a Gymnodium breve bloom along the west coast of Florida. The remotely measured ocean color imagery shows what is probably the patchy structure of a G. breve bloom extending over a 60 km by 100 km area. This conclusion is based on visual inspection of bathymetry to infer bottom reflection trends and on a single growth truth measurement of B G. breve obtained the previous day. The image shows coherent blooms which extend scales up to 60 km in length.

Description: The snowmelt-runoff model developed for two small central European watersheds simulate daily streamflow on the 228 sq km Dinwoody Creek basin in Wyoming, using snowcover extent for LANDSAT and conventionally measured temperature and precipitation. For the six-month snowmelt seasons of 1976 and 1974, the simulated seasonal runoff volumes were within 5 and 1%, respectively, of the measured runoff. Also the daily fluctuations of discharge were simulated to a high degree by the model. Thus far the limiting basin size for applying the model has not been reached, and improvements can be expected if the hydrometeorological data can be obtained from a station inside the basin. LANDSAT provides an efficient way to obtain the critical snowcover input parameter required by the model.

Description: A large scale numerical time-dependent model of sea ice that takes into account the heat fluxes in and out of the ice, the seasonal occurrence of snow, and ice motions was used in an experiment to determine the response of the Arctic Ocean ice pack to a warming of the atmosphere. The degree of warming specified is that expected for a doubling of atmospheric carbon dioxide with its associated greenhouse effect, a condition that could occur before the middle of the next century. The results of three 5-year simulations with a warmer atmosphere and varied boundary conditions were: (1) that in the face of a 5 K surface atmospheric temperature increase the ice pack disappeared completely in August and September but reformed in the central Arctic Ocean in mid fall; (2) that the simulations were moderately dependence on assumptions concerning cloud cover; and (3) that even when atmospheric temperature increases of 6-9 K were combined with an order-of-magnitude increase in the upward heat flux from the ocean, the ice still appeared in winter. It should be noted that a year-round ice-free Arctic Ocean has apparently not existed for a million years or more.

Description: During the summer of 1977, fire totaled 44 sq km of tundra vegetation according to measurements using LANDSAT imagery. Based on the experience gained from analysis of this fire using ground observations, satellite imagery, and topographic maps, it appears that natural drainages form effective fire breaks on the subdued relief of the Arctic coastal plain and northern foothills. It is confirmed that the intensity of the fire is related to vegetation type and to the moisture content of the organic rich soils.

Description: Images characteristics of geographic regions other than the northeastern part of the United States are presented for interpretation. Pre- and post-eruption imagery of Mt. St. Helens volcano serves to demonstrate the advantages of thermal infrared sensing, and the potential for developing a timely, decision oriented thematic map to be used in solving drought-related problems in Upper Volta is examined to show the applicability of satellite remote sensing in all geographic areas.

Description: The geostationary and polar satellites comprising the current operational system are discussed. The data acquisition capabilities of both satellite types and their complementary functions are reviewed. The advanced very high resolution radiometer on the TIROS N satellites is particularly addressed along with the imaging and atmospheric sounding instrumentation aboard the GOES satellites. The dissemination of the satellite data to the prospective users is also discussed.

Description: The 1980 eruptions of Mount St. Helens in southeast Washington resulted in a pronounced effect on the surface and ground water resources of the state. In response to the volcanic activity, the U.S. Geological Survey intensified statewide surface and ground water sampling programs to determine the nature and magnitude of the volcanic-induced variations. Streams to the east of Mount St. Helens received the major ash fallout. Chemical effects were best noted in smaller streams sampled 60 to 70 miles northeast of Mount St. Helens. The chemical variations observed were pronounced but short lived. Sulfate and chloride increases in anionic composition were prevalent immediately following the eruption; however, the original bicarbonate predominance was again attained within several days. Suspended iron and aluminum concentrations were similarly elevated during the period of greatest ash deposition (highest turbidity); however, the dissolved concentrations remained relatively constant. Depressions of pH were minor and short lived. Streams draining to the south, tributaries to the Columbia river, showed little observable changes in water chemistry. Streams draining to the west (Toutle river and its tributaries) were compositionally affected by the various volcanic activities. Chloride and sulfate anion percentage exceeded the bicarbonate percentage up to one month following the eruption period. Streams and lakes sampled in the immediate vicinity of Mount St. Helens, in addition to trace metals, contained organic compounds derived from decomposing wood buried in the debris deposits. This organic material may constitute a significant source of organic compounds to surface and ground water for some time to come.

Description: Snow accumulation and depletion at specific locations can be monitored from space by observing related variations in microwave brightness temperatures. Using vertically and horizontally polarized brightness temperatures from the Nimbus 6 electrically scanning microwave radiometer, a discriminant function can be used to separate snow from no snow areas and map snowcovered area on a continental basis. For dry snow conditions on the Canadian high plains, significant relationships between snow depth or water equivalent and microwave brightness temperature were developed which could permit remote determination of these snow properties after acquisition of a wider range of data. The presence of melt water in the snowpack causes a marked increase in brightness temperature which can be used to predict snowpack priming and timing of runoff. As the resolutions of satellite microwave sensors improve the application of these results to snow hydrology problems should increase.

Description: Methods using snowcovered area to update seasonal forecasts as snowmelt progresses are also being used in quasi-operational situations. The input of snowcovered area to snowmelt models for short term perdictions was attempted in two ways; namely, the modification of existing hydrologic models and/or the use of models that were specifically designed to use snowcovered area. A daily snowmelt runoff model was used with LANDSAT data to simulate discharge on remote basins in the Wind River Mountains of Wyoming. Daily predicted and actual flows compare closely, and, summarized over the entire snowmelt season (April 1 - September 30), the average difference is only three percent. The model and snowcovered area data are currently being tested on additional watersheds to determine the method's transferability.

Description: Presumably caused by lightning, a large fire occurred due east of Point Lay several kilometers southwest of the Kokolik River, the farthest north a fire was ever fought by Bureau of Land Management personnel in Alaska. The progress and area extent of the fire were determined by analysis of LANDSAT MSS band 5 and 7 imagery. Low altitude observations from helicopter showed the fire burned a range of vegetation and relief types which included low polygonized and upland tussock tundras. The burned area appeared wetter on the surface than the unburned area, due to a lack of moisture absorbing organic matter and the possible release of moisture from the deeper thawed zone. Suggestions for future investigations of the effects of fire on tundra and permafrost terrains are discussed.

Description: The benefits-to-cost ratio of satellite remote sensing, both as a substitute for conventional methods of monitoring and assessing resources, and as a supplement to these methods is examined using a model which analyzes the cost of aerial photography versus satellite scanner for producing and interpreting an image of the Earth's surface sized to LANDSAT dimensions. Examples of cost savings are tabulated for ground surveys, aerial photos, and LANDSAT. Possible additional benefits from LANDSAT D are assessed. The way in which satellites fit into more comprehensive models for resources management is discussed. It is shown that remote sensing is but one essential component in a complex system that aggregates technical. Socioeconomics, political, cultural, and other factors in the human decision process.

Description: Computer processing facilitates extraction of information from every pixel by executing a variety of functional operations, called processed algorithms, in general or specialized routines. The best results are obtained when data from more than one multispectral band are used together. Multivariate tatistical analysis, computer tape characteristics, processing modes, and a choice of systems (batch or interactive) are discussed. The major operations in computer processing elaborated include: preprocessing, enhancement, effects of rationing, and classification. Techniques for multisource data correlation are considered with emphasis on geobased systems.

Description: Learning objectives include: (1) developing an understanding of the implications of the term "near surface observations"; (2) associating the appearance of large ground features as seen in satellite imagery with their appearance as seen from the ground; (3) grasping criteria and procedures for selecting training sites on the ground for use in supervised classification; (4) running through an example of training site selection; (5) becoming familiar with several methods of accuracy assessment; (6) becoming aware of the approach and value of making supporting measurements of the spectral and physical properties of materials on the ground and from aircraft; (7) taking note of the different types of instruments used in making specific ground measurements; and (8) appreciating the rationale underlying laboratory and field studies on or near the Earth's surface for the purpose of developing new sensor systems.

Description: Learning objectives include: (1) developing a facility for applying conventional techniques of photointerpretation to small scale (satellite) imager; (2) promoting the ability to locate, identify, and interpret small natural and man made surface features in a LANDSAT image; (3) using supporting imagery, such as aerial and space photography, to conduct specific applications analyses; (4) learning to apply change detection techniques to recognize and explain transient and temporal events in individual or seasonal imagery; (5) producing photointerpretation maps that define major surface units, themes, or classes; (6) classifying or analyzing a scene for specific discipline applications in geology, agriculture, forestry, hyrology, coastal wetlands, and environmental pollution; and (7) evaluating both advantages and shortcomings in relying on the photointerpretive approach (rather than computer based analytical approach) for extracting information from LANDSAT data.

Description: Activities are provided for: (1) developing insight into the way in which the LANDSAT MSS produces multispectral data; (2) promoting understanding of what a "pixel" means in a LANDSAT image and the implications of the term "mixed pixel"; (3) explaining the concept of spectral signatures; (4) deriving a simple signature for a class or feature by analysis: of the four band images; (5) understanding the production of false color composites; (6) appreciating the use of color additive techniques; (7) preparing Diazo images; and (8) making quick visual identifications of major land cover types by their characteristic gray tones or colors in LANDSAT images.

Description: Learning objectives of the activities provided include: (1) reading the annotation of a LANDSAT image; (2) becoming acquainted with the characteristics of 1:1,000,000 scale transparencies and prints of MSS images; (3) noting the general information visible in LANDSAT photo products; (4) observing changes of appearance of any ground feature or class in the black and white images made from the four MSS bands and the characteristic color of each class in color composites; (5) determining the degree to which a LANDSAT image meets map accuracy standards and can be fitted to map projections; (6) assessing the effects of LANDSAT enlargements and scale changes and of the limitations of satellite resolution relative to aerial photos; (7) observing the influence of time of acquisition (season) on a scene; (8) getting a feel for image quality as dependent on processing and photoreproduction; (9) appreciating the characteristics of the RBV and thermal band imagery obtained from LANDSAT-3; and (10) becoming familiar with certain attributes of adjacent LANDSAT images which permit them to be joined in mosaics and to be viewed in stereo.

Description: Programs for the development and operation of meteorological satellites from the TIROS 1 satellite and the establishment of NASA through the 1960's are described. The technical problems confronted in the development of the early satellite systems are discussed in addition to issues in international involvement and program support. The TIROS and Nimbus series satellites are primarily addressed.

Description: The primary LANDSAT mission and the system requirements are summarized and pertinent parameters of the spacecraft, its orbit, and payload are tabulated. The history acquisition to entry into the archives for storage and product generation and dissemination is recounted. The LANDSAT D data handling plan is discussed showing requirements for both the MSS CCT and the thematic mapper CCT.

Description: The term remote sensing is defined as well as ideas such as class, pattern, feature, pattern recognition, feature extraction, and theme. The electromagnetic spectrum is examined especially those wavelength regions available to remote sensing. Relevant energy and wave propagation laws are discussed and the characteristics of emitted and reflected radiation and their detection are investigated. The identification of classes by their spectral signatures, the multispectral approach, and the principal types of sensors and platforms used in remote sensing are also considered.

Description: By using the most complete available records of direct beam radiation and volcanic eruptions, an historical analysis of the role of the latter in modulating the former was made. A very simple fallout and dispersion model was applied to the historical chronology of explosive eruptions. The resulting time series explains about 77 percent of the radiation variance, as well as suggests that tropical and subpolar eruptions are more important than mid-latitude eruptions in their impact on the stratospheric aerosol optical depth. The simpler climatic models indicate that past hemispheric temperature can be stimulated very well with volcanic and CO2 inputs and suggest that climate forecasting will also require volcano forecasting. There is some evidence that this is possible some years in advance.

Description: Visible and infrared pictures from two Geostationary Operational Environmental Satellite Systems satellites, in circular orbits at about 19,000 nautical miles, are available continuously at approximately 30 minute intervals. Still pictures and film loops from this system vividly depict the events associated with the May 18, 1980 eruption of Mount St. Helens. The initial explosion, shock wave, and visible horizontal dust distribution during the following week are readily apparent. Meteorological wind and height fields permit the inference of the vertical distribution of volcanic dust as well as explain the atmospheric behavior which caused the visible and nonvisible dust distribution.

Description: Examples of the use of geostationary satellites in meteorology are given. Studies of the rate of change of cumulus clouds and cloud systems and wind parameter determination from cloud motions are reviewed. Computer processed imagery products are also discussed.

Description: The Defense Meteorological Satellite Program is described with particular emphasis on the military applications of METSAT data. Satellite operational support, data processing and image quality requirements are discussed.

Description: A historical overview of the pioneer projects for the development of meteorological satellites is given. In addition, the parallel development of the responsible space agencies and panels is addressed. The Vanguard 2 satellite, the first Earth radiation experiment, and the vidicon equipped TIROS-1 satellite are discussed.

Description: A brief review of the effects of climate and weather on the 1980 Mount St. Helens eruptions and the subsequent dispersion of ash and gases and the reciprocal influences of the eruptions on climate and climatology is presented. The effects of mesoscale destruction of snow fields and vegetation, a revised mountain profile, and ash deposits are addressed along with impacts on hemispheric climate and disruption of normal climatological observations, in the areas directly affected by the explosions and ashfall. Environmental and economic consequences are also considered.

Description: Detailed features in cosmic X-ray sources and their associated temporal variation over a wide energy range were studied. Excess emission and absorption at approximately 6 to 7 kiloelectron volts in the spectra of supernova remnants, binary X-ray sources, and clusters of galaxies were observed. A gas scintillation proportional counter (GSPC) will be used as the detector system. In the gas scintillator the principal limitation is due to the statistics of the initial ionization process only.

Description: The Far Ultraviolet Space Telescope (FAUST) a compact, wide field-of-view, far ultraviolet instrument designed for astronomical observations of extended and point sources is discussed. The design and application of the instrument are described. The prime objective is to observe faint astronomical sources with sensitivities higher than previously available. Scientific programs will include: (1) a search for ultraviolet stars which are predicted to exist at the stage of evolution prior to the final death of a star; (2) observations of galaxies and quasars; and (3) joint programs with other Spacelab 1 experiments. The secondary objective is to verify the suitability of the Spacelab as a platform for far ultraviolet astronomy: data will be provided on the ultraviolet background levels due to astronomical, terrestrial, and spacecraft generated sources; the levels of contaminants which affect ultraviolet instruments; and the capability of the Orbiter for stable pointing at celestial sources for useful periods of time.

Description: Operation of the microwave instrument as a two frequency scatterometer, a synthetic aperture radar, and a passive microwave radiometer is planned. Operation of the instrument in each of its three modes is discussed and the antenna system described.

Description: Researchers define damage-tolerant structural systems as those systems which not only have adeqate intact strength to withstand initial failure but also adequate residual strength to minimize the possibility of, and hence the consequences of, further failure. The incorporation of damage tolerance cannot be done in total isolation of the function being required of the system and the costs associated with obtaining improved damage tolerance. The approach, therefore, is to formulate multiple-objective, multi-level decision support problems (DSP), the solutions of which represent a compromise between higher costs and higher damage tolerance. Mulitple-objective decision support problems are easily solved in the linear domain. These formulations, however, include both linear and nonlinear constraints and goals, which in the past, have not been considered due to the resulting complexity. Here, researchers: (1) present a complete discussion and description of decision support problems; (2) identify what further research needs to be done in order to obtain information that is required but not known for solving problems using these models; and (3) identify what needs to be done to implement this prototype method in practice.

Description: Ocean-going vehicles and platforms are among the largest structures in the world and are subjected to relatively harsh conditions of motions and loads. Some of them, such as semi-submersible platforms, are a relatively new type of structure and hence there is no formal, well evolved and established structural design code as there is for more traditional structures. More recently, efforts have also been made to develop a design method of this type for ships and other ocean structures. One of the many advantages of a rationally based design method is versatility; it can be used for structures that have widely differing purposes, measures of merit, shapes and sizes. The purpose is to describe a rationally based design method that has been developed within the field of ocean structures, in order that persons dealing with other types of structure can judge whether and to what extent its various features may be useful for those other types. Also, even though some features may not be applicable they might stimulate some useful ideas.

Description: As a user of devices and procedures for lightning protection, the author is asking the lightning research community for cookbook recipes to help him solve his problems. He is lamenting that realistic devices are scarce and that his mission does not allow him the time nor the wherewithal to bridge the gap between research and applications. A few case histories are presented. In return for their help he is offering researchers a key to lightning technology--the use of the Eastern Test Range and its extensive resources as a proving ground for their experiment in the lightning capital of the United States. A current example is given--a joint lightning characterization project to take place there. Typical resources are listed.

Description: An overview of the high speed photometer (HSP), its optics and detectors, its electronics, its mechanical structure, and some observational considerations are presented. The capabilities and limitations of the HSP are outlined.

Description: The Faint Object Camera fully exploits the spatial resolution capability of the Space Telescope on the very faintest detectable objects over a broad wavelength range. A full complement of filters, objective prisms and polarizers, a choice of coronograhic masks, and a variety of scan formats extend the scientific versatility of the direct imaging mode. In addition, the Faint Object Camera provides the unique facility of long-slit spectroscopy to Space Telescope observers.

Description: Geographic coverage frequency and geographic shot density for a satellite borne Doppler lidar wind velocity measuring system are measured. The equations of motion of the light path on the ground were derived and a computer program devised to compute shot density and coverage frequency by latitude-longitude sections. The equations for the coverage boundaries were derived and a computer program developed to plot these boundaries, thus making it possible, after an application of a map coloring algorithm, to actually see the areas of multiple coverage. A theoretical cross-swath shot density function that gives close approximations in certain cases was also derived. This information should aid in the design of an efficient data-processing system for the Doppler lidar.

Description: The random vibration of the components of the space shuttle causing internal cargo bay acoustic impingement on the payload was investigated. The import factors to be considered in the design of acoustically loaded structures are the prediction of acoustic environment, prediction of structural response to this environment, and to determine the effect of the response on the structural strength requirements. Two basic responses were analyzed. The primary structure response due to random vibration is first analyzed. The output of primary structure response is used as an input to the secondary structure to calculate the component response.

Description: A block diagram of the joint airport weather studies program is presented. Background leading to the development of the program is reviewed. Basic studies, aircraft performance, and detection and warning techniques used to develop fine scale structure of thunderstorm dynamics and kinematics in the vicinity of a major airport; effect of thunderstorm low level wind shear on aircraft performance; and development of real time testing of flow level wind shear detection and warning techniques and displays are described.

Description: The prototype regional observation and forecast system (PROFS) outputs are demonstrated, functional design specifications to be used to procure and implement operational systems are outlined. Advanced candidate technologies are evaluated as an integral part of the process that leads to these outputs. Evaluation insures that future weather service systems will contain the optimum mix of technologies to be most cost effective in reducing the annual losses and deaths that are directly attributed to severe weather.

Description: The icing environment at altitudes below 10,000 feet were studied. The following questions are asked, are: (1) existing aircraft certification criteria applicable; (2) too stringent on icing for helos; (3) based on accurate data; (4) appropriate for low (10,000 ft) altitudes? The research plan is outlined: review historical icing data, obtain new measurements, collect modern icing data from other groups, and recommend LWC, OAT, and MVD criteria for helicopters. Estimated accuracies and known sources of error are included. It is concluded that the net effect of possible sources of error of both signs is uncertain.

Description: Some operational and experimental products developed for aviation weather forecasting are briefly described. Experimental products include surface dew point, obstructions to vision, boundary layer model, computer-worded terminal forecasts, terminal alerting procedure, generalized equivalent Markov, and radar forecasts (0-2 hours).

Description: Doppler radar measurements of an intense wind shear occurance are discussed. The data suggest the presence of an incredibly strong low level jet outflow component of the microburst event, reaching 60 knots only 50 meters above the surface. Evidence also suggests that microbursts more typically occur in very weak thunderstorms that have hardly reached thunderstorm stage.

Description: The phenomenology of one class of strong thunderstorm downdrafts, microbursts, is described. Several aircraft accidents are analyzed in which a microburst was involved and a concept for an early warning wind shear sensor is presented.

Description: A method to improve clear air turbulence (CAT) forecasting by more effectively using the currently operational rawinsonde (RW) system is discussed. The method is called the Diagnostic Richardson Number Tendency (DRT) technique. The technique does not attempt to use the RW as a direct detector of the turbulent motion or even of the CAT mechanism structure but rather senses the synoptic scale centers of action which provide the energy to the CAT mechanism at the mesoscale level. The DRT algorithm is deterministic rather than statistical in nature, using the hydrodynamic equations (equations of motion) relevant to the synoptic scale. However, interpretation, by necessity, is probabilistic. What is most important with respect to its operational implementation is that this method uses the same input data as currently used by the operational National Meteorological Center prognostic models.

Description: A clear air turbulence (CAT) flight test to evaluate and test four different sensors in the detection and measuring of CAT and other meteorological targets that relate to turbulence is discussed. The primary types of CAT investigated were mountain wave CAT, jetstream CAT, CAT in cirrus clouds, and CAT in frontal wind shears, troughs, and ridges. The sensors included the CO2 pulsed Doppler lidar and three radiometers. One of the radiometers, at a frequency of 55.5 GHz, looked at atmospheric temperature structure. Another, at a frequency of 180.1 GHz, looked at atmospheric water vapor and investigated the feasibility of measuring at the microwave frequency the turbulence features seen in the infrared (IR) frequencies. An IR radiometer at 27 to 33 microns was the fourth sensor. This last device and the temperature structure radiometer worked well at all flight levels.

Description: The development of methods for the short range forecasting of visibility and ceiling conditions is discussed. Short range forecasts of one hour or less (5 or 30 minutes), immediately after a series of local observations can be expected to be more accurate and reliable than any forecast of more than one hour. These forecasts can be accomplished by the operational implementation of fully automated aviation observation systems and the utilization of statistical techniques such as the Generalized Equivalent Markov model.

Description: Requirements for an improved aviation weather system are defined and specifically include the need for (1) weather observations at all airports with instrument approaches, (2) more accurate and timely radar detection of weather elements hazardous to aviation, and (3) better methods of timely distribution of both pilot reports and ground weather data. The development of the discrete address beacon system data link, Doppler weather radar network, and various information processing techniques are described.

Description: The operational designs and performance capabilities of ground-based and airborne lightning detection systems are reviewed. The airborne Stormscope system is described and compared with onboard radar and the lightning detection and ranging system (LDAR). Two examples of difference-in-time-of-arrival systems for detecting spherics from discharges in electrified clouds are described: (1) The LDAR system and (2) Taylor's lightning mapping system. Next, an interferometric system adapted to lightning location is discussed. Finally, systems that are based upon crossed-loop magnetic direction finding principles but which have been refined and improved to accurately locate lightning discharges to ground are reviewed.

Description: The phenomenology of lightning and lightning measurement techniques are briefly examined with a particular reference to aeronautics. Developments made in airborne and satellite detection methods are reported. NASA research efforts are outlined which cover topics including in-situ measurements, design factors and protection, remote optical and radio frequency measurements, and space vehicle design.

Description: The ability of various types of remote probes to measure wind is discussed. Two important advantages over in-situ sensors are reported: (1) their ability to measure atmospheric parameters without disturbing the air flow; (2) their ability to scan through large volumes of the atmosphere with relative ease. Direct measurement sensors such as anemometers and wind vanes are categorized into two groups; active and passive. Acoustic radar, microwave radar, and lidar are included in the first group and the latter group is typified by the infrared radiometers.

Description: The problem of development of instrumentation for providing wind speed and direction information directly or indirectly to a pilot in the cockpit is considered. The pilots need for horizontal wind information at various stages of flight (i.e., at liftoff, in approach and departure corridors, and even in flight outside the terminal area) are emphasized.

Description: The basic reference material for gust design criteria are cited. The status of clear air turbulence meteorology (forecasting and detection) is discussed. The directions of further research technology is indicated.

Description: A list of icing instrumentation requirements are presented. Because of the Army's helicopter orientation, many of the suggestions are specific to rotary wing aircraft; however, some of the instrumentation are also suitable for general aviation aircraft.

Description: The types and usage categories of icing instrumentation are discussed. The state-of-the-art for the technology governing the use of icing instrumentation is reported with particular emphasis on ground based facilities for icing tests.

Description: The measurement of atmospheric turbulence is discussed in terms of a pilots viewpoint. Two areas of measurement are considered: frequency and severity of turbulence. Suggestions are given for helping the pilot solve the turbulence problem.

Description: An overview is given of the developmental status of aviation weather services. Particular attention is given to justifying the need for better, more reliable service. The accomplishments of several automatic weather stations are discussed.

Description: The dynamic and rapid growth of technology in the area of aviation meteorology research and development are described with emphasis on the measurement of hazardous weather phenomena. Aspects of both onboard instrumentation and ground based facilities are evaluated in terms of their effectiveness of in avoiding hazards due to atmospheric electricity and lightning. Methods of alleviating terminal are hazards such as fog, low visibility and ceilings are also described.

Description: Various aspects of aviation meteorology are discussed with respect to their relative effects on aircraft terminal operations. Existing data on turbulence and wind shear from aircraft and towers are summarized. The significance of obtaining more real time wind and temperature information is emphasized. The application and testing of various radiometer devices are also described. Airborne methods to indicate wind differences at flight altitude and at touchdown are reported.

Description: Three projects are suggested which could be done using the Doppler lidar. The first is a cooperative effort at BAO, the purpose of which is to check out instrumentation and contribute to boundary layer investigations at BAO. The second concerns unintended weather modification. Its purpose is to detect mechanisms by which regions of industry and urbanization modify weather. The cirrus cloud study proposes to characterize cirrus clouds by their lidar signal and to compare lidar and visually observed characteristics.

Description: General criteria for a flight test option are that: (1) there be a good opportunity for comparison with other measurement techniques; (2) the flow to be measured is of considerable scientific or practical interest; and (3) the airborne laser Doppler system is well suited to measure the required quantities. The requirement for comparison, i.e., ground truth, is particularly important because this is the first year of operation for the system. It is necessary to demonstrate that the system does actually measure the winds and compare the results with other methods to provide a check on the system error analysis. The uniqueness of the laser Doppler system precludes any direct comparison, but point measurements from tower mounted wind sensors and two dimensional fields obtained from radars with substantially different sampling volumes are quite useful.

Description: The experiment strives to improve understanding of the physics of convective precipitation. Major emphasis is placed on obtaining a good description of the whole convective precipitation system. A framework is presented within which single, significant, tractable problems are investigated.

Description: The objectives of the system are to provide the system operator with real time system performance check and to provide data recording of all SSMS data. Meteorologists are provided with real time indication of meteorological data measurements including aid for directing flight profiles in real time and aid for directing SSMS operations. A day-to-day feedback is provided to meteorologists, system operators, and flight crews for flight planning on subsequent flight tests days.

Description: The problem is to operate on two scalar fields to produce a vector field, to produce user products from the vector field, and to establish reliability of results. Data problems encountered include sparse measurements, irregular distribution, varying quality, imperfect orthogonality, aliasing due to sampling volume, and measurements not simultaneous. Desired algorithm characteristics, solution elements, and characteristics of the model are listed. The seven simulation elements, eight algorithm steps and the required user inputs are given.

Description: A group meeting was assembled to focus on the planning of specific experiments, to establish some priorities, identify interested scientists who would like to participate, establish any special requirements, make recommendations on data processing, and to prepare flight plan outlines. Since the number of convective storms in the CCOPE (Cooperative Convective Precipitation Experiment) field experiment area are limited to only a few days during the operational time period the flight plans must be designed with a hierarchy of abort experiments so that the easily identified and lowest probability events should take priority until their quota is filled.

Description: The development of pulsed and continuous wave Doppler lidars for atmospheric measurement is discussed. A description of how the lidar systems operate is presented. The scanning mode is also described.