ALBERT

All Library Books, journals and Electronic Records Telegrafenberg

X
feed icon rss

Your email was sent successfully. Check your inbox.

An error occurred while sending the email. Please try again.

Proceed reservation?

Export
Filter
  • Other Sources  (1,677)
  • AIRCRAFT DESIGN, TESTING AND PERFORMANCE  (861)
  • SPACECRAFT PROPULSION AND POWER  (816)
  • 1980-1984  (1,668)
  • 1950-1954  (9)
Collection
  • Other Sources  (1,677)
Source
Keywords
Years
Year
  • 1
    facet.materialart.
    Unknown
    Analysis of a transport fuselage section drop test (1984)
    In:  CASI
    Details
    Publication Date: 2005-03-28
    Description: Transport fuselage section drop tests provided useful information about the crash behavior of metal aircraft in preparation for a full-scale Boeing 720 controlled impact demonstration (CID). The fuselage sections have also provided an operational test environment for the data acquisition system designed for the CID test, and data for analysis and correlation with the DYCAST nonlinear finite-element program. The correlation of the DYCAST section model predictions was quite good for the total fuselage crushing deflection (22 to 24 inches predicted versus 24 to 26 inches measured), floor deformation, and accelerations for the floor and fuselage. The DYCAST seat and occupant model was adequate to approximate dynamic loading to the floor, but a more sophisticated model would be required for good correlation with dummy accelerations. Although a full-section model using only finite elements for the subfloor was desirable, constraints of time and computer resources limited the finite-element subfloor model to a two-frame model. Results from the two-frame model indicate that DYCAST can provide excellent correlation with experimental crash behavior of fuselage structure with a minimum of empirical force-deflection data representing structure in the analytical model.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: Res. in Struct. and Dyn., 1984; p 347-368
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 2
    facet.materialart.
    Unknown
    Crashworthiness of light aircraft fuselage structures: A numerical and experimental investigation (1984)
    In:  CASI
    Details
    Publication Date: 2005-03-28
    Description: The dynamic behavior of aircraft fuselage structures subject to various impact conditions was investigated. An analytical model was developed based on a self-consistent finite element (CFE) formulation utilizing shell, curved beam, and stringer type elements. Equations of motion were formulated and linearized (i.e., for small displacements), although material nonlinearity was retained to treat local plastic deformation. The equations were solved using the implicit Newmark-Beta method with a frontal solver routine. Stiffened aluminum fuselage models were also tested in free flight using the UTIAS pendulum crash test facility. Data were obtained on dynamic strains, g-loads, and transient deformations (using high speed photography in the latter case) during the impact process. Correlations between tests and predicted results are presented, together with computer graphics, based on the CFE model. These results include level and oblique angle impacts as well as the free-flight crash test. Comparisons with a hybrid, lumped mass finite element computer model demonstrate that the CFE formulation provides the test overall agreement with impact test data for comparable computing costs.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: NASA. Langley Research Center Res. in Struct. and Dyn., 1984; p 325-346
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 3
    facet.materialart.
    Unknown
    Multiobjective optimization techniques for structural design (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: The multiobjective programming techniques are important in the design of complex structural systems whose quality depends generally on a number of different and often conflicting objective functions which cannot be combined into a single design objective. The applicability of multiobjective optimization techniques is studied with reference to simple design problems. Specifically, the parameter optimization of a cantilever beam with a tip mass and a three-degree-of-freedom vabration isolation system and the trajectory optimization of a cantilever beam are considered. The solutions of these multicriteria design problems are attempted by using global criterion, utility function, game theory, goal programming, goal attainment, bounded objective function, and lexicographic methods. It has been observed that the game theory approach required the maximum computational effort, but it yielded better optimum solutions with proper balance of the various objective functions in all the cases.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: NASA. Langley Research Center Recent Experiences in Multidisciplinary Analysis and Optimization, Part 2; 8 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 4
    facet.materialart.
    Unknown
    Overview: Applications of numerical optimization methods to helicopter design problems (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: There are a number of helicopter design problems that are well suited to applications of numerical design optimization techniques. Adequate implementation of this technology will provide high pay-offs. There are a number of numerical optimization programs available, and there are many excellent response/performance analysis programs developed or being developed. But integration of these programs in a form that is usable in the design phase should be recognized as important. It is also necessary to attract the attention of engineers engaged in the development of analysis capabilities and to make them aware that analysis capabilities are much more powerful if integrated into design oriented codes. Frequently, the shortcoming of analysis capabilities are revealed by coupling them with an optimization code. Most of the published work has addressed problems in preliminary system design, rotor system/blade design or airframe design. Very few published results were found in acoustics, aerodynamics and control system design. Currently major efforts are focused on vibration reduction, and aerodynamics/acoustics applications appear to be growing fast. The development of a computer program system to integrate the multiple disciplines required in helicopter design with numerical optimization technique is needed. Activities in Britain, Germany and Poland are identified, but no published results from France, Italy, the USSR or Japan were found.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: NASA. Langley Research Center Recent Experiences in Multidisciplinary Analysis and Optimization, Part 2; 13 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 5
    facet.materialart.
    Unknown
    The structural optimization of a spreader bar for twin lift helicopter operations (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: An optimization study was performed to develop a minimum weight spreader bar to allow two helicopters to lift the same payload. With this arrangement, the maximum payload that can be lifted is almost doubled without the expense of designing and building a new helicopter. The concept has had some limited use by civil helicopter operators using small helicopters and has been demonstrated in large scale by two CH-54's which successfully lifted a total load of 20 ton. To this point, rather heavy available beams or tower structures have been used for the spreader bar. Since the weight of the bar not only detracts from payload but also adds to the logistics problem, there are more than the usual incentives to minimize weight. Since the design requirement is for classic beam column with uniform side loads resulting from bar weight and aerodynamic drag, the design problem is particularly amenable to optimization. A study has been performed at Sikorsky to establish the minimum weight for a spreader bar sized to carry a load equal to the capacity of two Army BLACK HAWK helicopters. Toward this end, a computer program was written to analyze the spreader bar deflections and stresses and coupled to the NASA developed CONMIN optimization routines.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: NASA. Langley Research Center Recent Experiences in Multidisciplinary Analysis and Optimization, Part 2; 12 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 6
    facet.materialart.
    Unknown
    Optimization of helicopter rotor blade design for minimum vibration (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: The optimization approach discussed is part of an ongoing effort to develop a general automated procedure for rotor blade design. This procedure can be used to determine the necessary geometric, structural, and material properties of a rotor system to achieve desired objectives relating to vibration, stress, and aerodynamic performance. The approach used for helicopter vibration is emphasized. Based on analytical studies performed at the United Technologies Research Center (UTRC), a simplified vibration analysis was developed to be used in conjunction with a forced response analysis in the optimization process. This simplified analysis improves the efficiency of the design process significantly. Results of applying this approach to the design of an existing rotor blade model are presented.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: NASA. Langley Research Center Recent Experiences in Multidisciplinary Analysis and Optimization, Part 2; 17 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 7
    facet.materialart.
    Unknown
    Attack helicopter (AH-1T) cockpit systems integration (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: This discussion summarizes the effort conducted by the BHTI Human Factors and Cockpit Arrangement group for a study and design of the integration of a cockpit control system for the AH 1T (TOW). The resulting design is a culmination of studies that were conducted using the existing configuration as a baseline and complementing it with new equipment and subsystems that fulfill the attack helicopter requirements for the foreseeable future. Of primary concern was the requirement to add a missile control system, with secondary considerations for improved NOE and night operations. In addition, growth capabilities for improved target acquisition, weapons delivery, and precise navigation was considered. Along with the addition of new equipment, the aircraft was assumed to have a central multiplex data bus system for information transfer throughout the aircraft and its subsystems.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: NASA. Ames Research Center Technical Workshop: Advanced Helicopter Cockpit Design Concepts; p 271-316
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 8
    facet.materialart.
    Unknown
    Operational requirements - system concepts (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: Nine research areas that are most critical to the issue of cockpits for the single pilot are discussed. Helicopter are addressed in this report. They are as follows: (1) automation priority issues; (2) increased complexity of systems; (3) cockpit workload highest in navigation; (4) auto hover and flight trim controls; (5) voice technology in integrated form; (6) systems must have visual and auditory declutter modes; (7) cockpit should be designed to be NBC resistant; and (8) considerations for spillover to civilian public service.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: Technical Workshop: Advanced Helicopter Cockpit Design Concepts; p 229-238
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 9
    facet.materialart.
    Unknown
    HH-60D night hawk helicopter (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: Fundamental development issues, system requirements and improvements are reported for the HH-60D night hawk helicopter. The HH-60D mission requirements are for combat search and rescue (aerospace rescue and recovery service user based at Scott AFB) and special operations (special operations forces based at Hurlburt AFB). Cockpit design, computer architecture and software are described in detail.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: NASA. Ames Research Center Technical Workshop: Advanced Helicopter Cockpit Design Concepts; p 145-164
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 10
    facet.materialart.
    Unknown
    EET theoretical design techniques (1981)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: As a part of the EET aerodynamics program an out-of-house program was developed and monitored to provide theoretical procedures useful in the design of transport aircraft. The focus of the effort was to provide tools valid in the nonlinear transonic speed range. The effort was divided into two basic areas, inviscid configuration analysis and design procedures and viscous correction procedures.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: Advan. Aerodyn.: Selected NASA Res.; p 79-94
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 11
    facet.materialart.
    Unknown
    F-111 TACT natural laminar flow glove flight results (1981)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: Improvements in cruise efficiency on the order of 15 to 40% are obtained by increasing the extent of laminar flow over lifting surfaces. Two methods of achieving laminar flow are being considered, natural laminar flow and laminar flow control. Natural laminar flow (NLF) relies primarily on airfoil shape while laminar flow control involves boundary layer suction or blowing with mechanical devices. The extent of natural laminar flow that could be achieved with consistency in a real flight environment at chord Reynolds numbers in the range of 30 x 10(6) power was evaluated. Nineteen flights were conducted on the F-111 TACT airplane having a NLF airfoil glove section. The section consists of a supercritical airfoil providing favorable pressure gradients over extensive portions of the upper and lower surfaces of the wing. Boundary layer measurements were obtained over a range of wing leading edge sweep angles at Mach numbers from 0.80 to 0.85. Data were obtained for natural transition and for a range of forced transition locations over the test airfoil.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: NASA. Langley Research Center Advan. Aerodyn.: Selected NASA Res.; p 11-20
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 12
    facet.materialart.
    Unknown
    Space aging of solid rocket materials (P0005) (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: The objective of this experiment is to determine the effects of long-term orbital exposure on the materials used in solid-rocket space motors. Specifically, structural materials and propellants from the STAR/PAM-D series motors and the PAM DII/IPSM-II motors will be tested, as well as advanced composite case and nozzle materials planned for future use. The experiment approach is to expose samples of solid-rocket propellant, liner, insulation, case, and nozzle specimens to the space environment and to compare preflight and postflight measurements of various mechanical, chemical, and ballistic properties.
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: NASA. Langley Research Center Long Duration Exposure Facility (LDEF); p 94-96
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 13
    facet.materialart.
    Unknown
    Analysis of fuel system technology for broad property fuels (1984)
    In:  CASI
    Details
    Publication Date: 2006-04-09
    Description: An analytical study was performed in order to assess relative performance and economic factors involved with alternative advanced fuel systems for future commercial aircraft operating with broad property fuels. Significant results, with emphasis on design practicality from the engine manufacturer' standpoint, are highlighted. Several advanced fuel systems were modeled to determine as accurately as possible the relative merits of each system from the standpoint of compatibility with broad property fuel. Freezing point, thermal stability, and lubricity were key property issues. A computer model was formulated to determine the investment incentive for each system. Results are given.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: NASA. Lewis Research Center Assessment of Alternative Aircraft Fuels; p 141-158
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 14
    facet.materialart.
    Unknown
    Aeroelastic-aerodynamic optimization of high speed helicopter-compound rotor (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: Several problems related to the aeroelastic/aerodynamic optimization of a high speed helicopter compound rotor are discussed. The helicopter fuselage vibration problem, the effects of fuselage vibrations, the source of external and periodic air loads, typical airfoil environments and configurations, rotor dynamics, vibration reduction, and requirements for the rotor design optimization analysis are among the topics covered.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: NASA. Langley Research Center Recent Experiences in Multidisciplinary Analysis and Optimization, Part 2; 20 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 15
    facet.materialart.
    Unknown
    Helicopter rotor blade aerodynamic optimization by mathematical programming (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: Formal mathematical programing was applied to the aerodynamic rotor blade design process. The approach is to couple hover and forward flight analysis programs with the general-purpose optimization program CONMIN to determine the blade taper ratio, percent taper, twist distribution, and solidity which minimize the horsepower required at hover while meeting constraints on forward flight performance. Designs obtained using this approach for the blade of a representative Army helicopter compare well with those obtained using a conventional approach involving personnel-intensive parametric studies. Results from the present method can be obtained in 2 days as compared to 5 weeks required by the conventional procedure. Also the systematic manipulation of the design variables by the optimization procedure minimizes the need for the researcher to have a vast body of past experience and data in determining the influence of a design change on the performance.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: Recent Experiences in Multidisciplinary Analysis and Optimization, Part 2; 12 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 16
    facet.materialart.
    Unknown
    Integrated cockpit design for the Army helicopter improvement program (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: The main Army Helicopter Improvement Program (AHIP) mission is to navigate precisely, locate targets accurately, communicate their position to other battlefield elements, and to designate them for laser guided weapons. The onboard navigation and mast-mounted sight (MMS) avionics enable accurate tracking of current aircraft position and subsequent target location. The AHIP crewstation development was based on extensive mission/task analysis, function allocation, total system design, and test and verification. The avionics requirements to meet the mission was limited by the existing aircraft structural and performance characteristics and resultant space, weight, and power restrictions. These limitations and night operations requirement led to the use of night vision goggles. The combination of these requirements and limitations dictated an integrated control/display approach using multifunction displays and controls.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: NASA. Ames Research Center Technical Workshop: Advanced Helicopter Cockpit Design Concepts; p 121-144
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 17
    facet.materialart.
    Unknown
    Effect of heavy rain on aircraft (1981)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: A summary on heavy rain effects on aircraft aerodynamics validation of research and some wind shear accidents in which heavy rain were an important factor. Frost formation and what frost does to the lift and drag curves for an airfoil was examined. If frost could cause severe aerodynamic problems for both general aviation and transport aircraft due to its roughness, then heavy rain produce a similar result. The influencing parameters of heavy rain on an aircraft are studied. Sources of aerodynamic roughness due to rain and wind shear and heavy rain accidents are outlined.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: NASA. Marshall Space Flight Center Proc.: 5th Ann. Workshop on Meteorol. and Environ. Inputs to Aviation Systems 76-80 (SEE N82-21139 12-01)
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 18
    facet.materialart.
    Unknown
    Meteorology impact on future aircraft design (1981)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: Meteorology impact on future aircraft design is discussed. Upcoming changes in both design and operations that will be influenced by the meteorological environment are outlined. Future and more nonconventional designs and meteorological impact brought about by operational changes over the next few years are examined.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: NASA. Marshall Space Flight Center Proc.: 5th Ann. Workshop on Meteorol. and Environ. Inputs to Aviation Systems; p 29-34
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 19
    facet.materialart.
    Unknown
    Space shuttle main engine: Hydraulic system (1981)
    In:  CASI
    Details
    Publication Date: 2006-01-16
    Description: The hydraulic actuation system of the space shuttle main engine is discussed. The system consists of five electrohydraulic actuators and a single engine filter used to control the five different propellant valves, which in turn control thrust and mixture ratio of the space shuttle main engine. The hydraulic actuation system provides this control with a precision of 98.7 percent or an error in position no greater than 1.3 percent of full scale rotational travel for critical positions.
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: the 15th Aerospace Mech. Symp.; p 291-301
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 20
    facet.materialart.
    Unknown
    SRB dewatering set (1981)
    In:  CASI
    Details
    Publication Date: 2006-01-16
    Description: The system components and operation of the space shuttle solid rocket booster (SRB) dewatering set are described. The SRB dewatering set consists of a nozzle plug, control console, remote control unit, power distribution unit, umbilical cable, interconnect cables, and various handling and storage items. The nozzle plug (NP) is a remotely controlled, tethered underwater vehicle that is launched from the retrieval vessel (RV) by a crane, descends down the side of the SRB, and is positioned below the SRB nozzle. A TV camera mounted at the top of the NP central core is used by the control console operator to visually guide the NP during descent and docking. The NP is then driven up and locked into the nozzle. Compressed air is passed through the umbilical from the RV, through the NP and into the SRB motor. The water inside the SRB is expelled causing the SRB to rotate to a near horizontal attitude on the surface of the water.
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: NASA. Marshall Space Flight Center The 15th Aerospace Mech. Symp.; p 279-289
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 21
    facet.materialart.
    Unknown
    Zero gravity testing of flexible solar arrays (1981)
    In:  CASI
    Details
    Publication Date: 2006-01-16
    Description: Zero gravity testing in the KC-135 aircraft of flat fold flexible solar array test specimens sufficiently demonstrated the adequacy of the panel design. The aircraft flight crew provided invaluable assistance and significantly contributed to the design and development of the flexible solar array, and ultimately to the potential success of the solar electric propulsion solar array shuttle flight experiment program.
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: The 15th Aerospace Mech. Symp.; p 115-136
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 22
    facet.materialart.
    Unknown
    Meteorological impact on aviation fuel efficiency (1981)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: The connection between fuel consumption and weather data is discussed. Fuel efficient flights creating adequate near real time weather information are examined. The lack of highly resolved real time and near real time wind and temperature data at flight altitudes is investigated. The existing systems, which is based on twice a day balloon observations, supplemented by pilot reports or other occasional data, is not adequate for optimum flight planning. The impacts of upper winds and temperatures on fuel efficiency and flight planning are not widely appreciated and developing new weather products are considered.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: NASA. Marshall Space Flight Center Proc.: 5th Ann. Workshop on Meteorol. and Environ. Inputs to Aviation Systems; p 15-19
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 23
    facet.materialart.
    Unknown
    Fuel system research and technology: An overview of the NASA program (1984)
    In:  CASI
    Details
    Publication Date: 2006-04-09
    Description: The interactions between the design and operation of aircraft fuel systems and the properties of alternative aircraft fuels are discussed. An overview of fuels system research and technology in terms of its rationale, its progress, and future plans is given. The measurement of ambient air temperatures for a wide range of seasonal and geographic variations, design studies on the use of fuels with increased as well as conventional freezing temperatures, the evaluation of fuel heating systems, and the low temperature behavior of fuels are among the topics discussed.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: Assessment of Alternative Aircraft Fuels; p 111-120
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 24
    facet.materialart.
    Unknown
    Multidisciplinary approach to the design of high pressure oxygen systems (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: Several examples of spacecraft systems fires are examined. Much of the design, manufacture, inspection, test, and operation of current high pressure oxygen components and systems has been driven by weight, cost, functional, and schedule requirements. As a result, little coordination has been expended on design for safe operation. While the number of oxygen related fires has not been large, their cost, including program losses and delays, has been very large. Most of these failures need not have occurred.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: NASA. Langley Research Center Recent Experiences in Multidisciplinary Analysis and Optimization, Part 2; 13 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 25
    facet.materialart.
    Unknown
    Fuel system design concepts for broad property fuels (1984)
    In:  CASI
    Details
    Publication Date: 2006-04-09
    Description: The results of a study assessing the impact of using jet fuel with relaxed specification properties on an aircraft fuel system are given. The study objectives were to identify credible values for specific fuel properties which might be relaxed, to evolve advanced fuel system designs for airframe and engines which would permit use of the specified relaxed properties fuels, and to evaluate performance of the candidate advanced fuel systems and the relaxed property fuels in a typical transport aircraft. The study used, as a baseline, the fuel system incorporated in the Lockheed Tristar. This aircraft is powered by three RB.211-524 Rolls-Royce engines and incorporates a Pratt and Whitney ST6C-421 auxiliary power unit for engine starting and inflight emergency electrical power. The fuel property limits examined are compared with commercial Jet A kerosene and the NASA RFP fuel properties. A screening of these properties established that a higher freezing point and a lower thermal stability would impact fuel system design more significantly than any of the other property changes. Three candidate fuel systems which combine the ability to operate with fuels having both a high freeze point and a low thermal stability are described. All candidates employ bleed air to melt fuel freeze-out prior to starting the APU or an inoperable engine. The effects of incorporating these systems on aircraft weight and engine specific fuel consumption are given.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: NASA. Lewis Research Center Assessment of Alternative Aircraft Fuels; p 159-170
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 26
    facet.materialart.
    Unknown
    Application of numerical optimization to rotor aerodynamic design (1984)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: Based on initial results obtained from the performance optimization code, a number of observations can be made regarding the utility of optimization codes in supporting design of rotors for improved performance. (1) The primary objective of improving the productivity and responsiveness of current design methods can be met. (2) The use of optimization allows the designer to consider a wider range of design variables in a greatly compressed time period. (3) Optimization requires the user to carefully define his problem to avoid unproductive use of computer resources. (4) Optimization will increase the burden on the analyst to validate designs and to improve the accuracy of analysis methods. (5) Direct calculation of finite difference derivatives by the optimizer was not prohibitive for this application but was expensive. Approximate analysis in some form would be considered to improve program response time. (6) Program developement is not complete and will continue to evolve to integrate new analysis methods, design problems, and alternate optimizer options.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: NASA. Langley Research Center Recent Experiences in Multidisciplinary Analysis and Optimization, Part 2; 15 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 27
    facet.materialart.
    Unknown
    Ground- versus spaced-based orbital transfer vehicle (1982)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: A space based orbital transfer vehicle (SBOTV) and ground based OTV's (GBOTV) are compared for debris protection, space based OTV maintenance provisions, flight performance, onorbit refueling, and launch and return operations. Debris protection has a severe impact on the SBOTV, while the penalty for the GBOTV is much less severe. A key technology issue is the protection capability of composite materials. Onorbit maintenance is critical for SBOTV. Reduction of losses during the various transfers is th maine problem with refueling a SBOTV. Zero-g propellant storage and transfer is an important technology area for SBOTV. A reusable shroud must be developed to return GBOTV's if a Shuttle derivative vehicle is used. The advantage of space basing lies in more efficient use of the launch vehicle. Since most of the mass going to LEO is OTV propellant, and the launches to deliver the SBOTV propellant are generally mass limited, substantially fewer launches are required to support the SBOTV.
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: NASA. Lewis Research Center Large Space Systems(Propulsion Interactions; p 127-134
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 28
    facet.materialart.
    Unknown
    The potential impact of new power system technology on the design of a manned Space Station (1984)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Description: Larger, more complex spacecraft of the future such as a manned Space Station will require electric power systems of 100 kW and more, orders of magnitude greater than the present state of the art. Power systems at this level will have a significant impact on the spacecraft design. Historically, long-lived spacecraft have relied on silicon solar cell arrays, a nickel-cadmium storage battery and operation at 28 V dc. These technologies lead to large array areas and heavy batteries for a Space Station application. This, in turn, presents orbit altitude maintenance, attitude control, energy management and launch weight and volume constraints. Size (area) and weight of such a power system can be reduced if new higher efficiency conversion and lighter weight storage technologies are used. Several promising technology options including concentrator solar photovoltaic arrays, solar thermal dynamic and ultimately nuclear dynamic systems to reduce area are discussed. Also, higher energy storage systems such as nickel-hydrogen and the regenerative fuel cell (RFC) and higher voltage power distribution which add system flexibility, simplicity and reduce weight are examined. Emphasis placed on the attributes and development status of emerging technologies that are sufficiently developed so that they could be available for flight use in the early to mid 1990's.
    Keywords: SPACECRAFT PROPULSION AND POWER
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 29
    facet.materialart.
    Unknown
    Simplification of power electronics for ion thruster neutralizers (1984)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: Journal of Spacecraft and Rockets (ISSN 0022-4650); 21; 473-480
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 30
    facet.materialart.
    Unknown
    Computer control for automated flight test maneuvering (1984)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The application of an experimental flight test maneuver autopilot test technique for collecting aerodynamic and structural flight research data on a highly maneuverable aircraft is described in this paper. This technique, which was developed to increase the quality and quantity of data obtained during flight test, was applied to the highly maneuverable aircraft technology (HiMAT) vehicle. A primary flight experiment was to verify the design techniques used to develop the HiMAT aerodynamics and structures. This required the performance of maneuvers for collection of large quantities of high-quality pressure distribution, loads, and wing and canard deflection data. Flight data obtained while executing these research maneuvers are presented to demonstrate the effectiveness of this new technique.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: Journal of Aircraft (ISSN 0021-8669); 21; 776-782
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 31
    facet.materialart.
    Unknown
    Status review of a supersonically biased fighter wing design study (1984)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: Journal of Aircraft (ISSN 0021-8669); 21; 767-775
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 32
    facet.materialart.
    Unknown
    Photovoltaic conversion of laser to electrical power (1983)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Transmission of power in space using lasers will require devices for converting the laser power to electrical power. One such type of device for accomplishing this is the photovoltaic converter. This paper reviews photovoltaic converters and their application for conversion of monochromatic laser power to electrical power. Laser power densities greater than 1000 W/sq cm are considered. For a converter operated at 300 K a lower bandgap limit of 0.67 eV (1.80 micron) is defined. For ideal conditions, an efficiency of 47.8 percent is calculated for Nd/Liquid laser radiation incident on an Si converter. Several types of photovoltaic converters are discussed. Series resistance is identified as a major problem. Vertical multijunction converters are the most promising photovoltaic devices for use as laser to electric power converters.
    Keywords: SPACECRAFT PROPULSION AND POWER
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 33
    facet.materialart.
    Unknown
    Space power system utilizing Fresnel lenses for solar power and also thermal energy storage (1983)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: A solar power plant suitable for earth orbits passing through Van Allen radiation belts is described. The solar-to-electricity conversion efficiency is estimated to be around 9 percent, and the expected power-to-weight ratio is competitive with photovoltaic arrays. The system is designed to be self-contained, to be indifferent to radiation belt exposures, store energy for periods when the orbiting system is in earth shadow (so that power generation is contant), have no moving parts and no working fluids, and be robust against micrometeorite attack. No electrical batteries are required.
    Keywords: SPACECRAFT PROPULSION AND POWER
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 34
    facet.materialart.
    Unknown
    Development of a rotary power transformer and inverter drive for spacecraft (1983)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Many future satellites and spacecraft with spun and despun configurations will require the transfer of power across rotating interfaces in lieu of slip-rings and/or flexures. This is particularly true of spacecraft that have to demonstrate a long life expectancy. The rotary transformer has the desirable characteristics of high reliability and low noise, which qualify it as a potential replacement for slip rings. Development of a rotary power transformer follows the successful completion of a task to develop rotary signal-level transformers for the Galileo Spacecraft Project. The physical configuration of a rotary power transformer has a significant effect on its magnetic and electrical characteristics and therefore impacts the design of the dc/ac inverter driver. Important characteristics addressed during this development effort include: operating frequency, efficiency, transformer gap size, leakage inductance, and leakage flux. A breadboard inverter and rotary transformer were designed, fabricated and tested.
    Keywords: SPACECRAFT PROPULSION AND POWER
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 35
    facet.materialart.
    Unknown
    Creating competitive rotorcraft noise technology (1984)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Rotorcraft noise includes turbofan engine noise components, as well as noise from the main and tail rotors that is conditioned by the aircraft's various operational modes. Both of the rotors generate loading noise and broadband noise. Another noise contributor is blade/vortex interaction noise, which results when shed vortices are encountered by a following blade, releasing impulsive acoustic energy. Attention is presently given to the experimental and developmental initiatives to be made by a NASA/industry five-year program that began in 1983. Aeroacoustic data acquired from experiments conducted in NASA facilities can be used in the development of empirical noise prediction methods, in the improvement of existing noise prediction methodology, in the evaluation of proposed reduced noise designs, and in the establishment of useful scaling relationships for selected noise-generating mechanisms.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: Aerospace America (ISSN 0740-722X); 22; 60-63
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 36
    facet.materialart.
    Unknown
    A study of altitude and flight path angle dynamics for a singularly perturbed fuel optimization problem (1983)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: This short paper will demonstrate that the separation of altitude and flight path angle dynamics using singular perturbation techniques for a transport fuel optimization problem results in an unacceptable oscillation in altitude. A technique for damping this oscillation by adding a penalty term to the cost function for the optimization problem will be discussed. This technique will be compared with a different approach that linearizes the altitude and flight path angle boundary layers.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 37
    facet.materialart.
    Unknown
    Solar array system for solar maximum mission (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The paper describes the design of the solar array system (SAS) for the Solar Maximum Mission, the unique features of the SAS, and the results of its successful in-orbit operation. It is noted that the array was unique in that: (1) major weight concessions were made to produce a dynamically stiff array; (2) it was the first array designed to be compatible with the NASA Multimission Modular Spacecraft; (3) it is the first jettisonable solar array; and (4) it represents the first use of FEP-bonded overslides on a prime power array. It is concluded that the array performed as predicted with no evidence of the FEP causing any unusual array power degradations. In addition, the deployment and telemetry systems performed as designed.
    Keywords: SPACECRAFT PROPULSION AND POWER
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 38
    facet.materialart.
    Unknown
    New directions in solar array development (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: A broad overview is presented of current and near-term solar array technology that could be suitable for space use. Particular consideration is given to such advanced concepts as high power arrays, concentrator arrays, and ultrathin solar cell arrays. It is concluded that if such ambitious concepts as geosynchronous space platforms, orbital space stations, and alternate forms of propulsion are realized, the type of new technology described in this paper may find acceptance for space.
    Keywords: SPACECRAFT PROPULSION AND POWER
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 39
    facet.materialart.
    Unknown
    Application of beam power technology to a space station (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The feasibility and performance parameters for beam microwave power supplies from a space station to nearby orbiting satellites are examined. A 5.8 GHz transmission frequency is found suitable for beaming 1-10 kW over a distance of 1-10 km. The antenna could have a 15 m diameter, a 64 kW output, provide uniform illumination, and have a retrodirective phase control system. A LEO to ground demonstration project is described, involving power levels of 0.0025 mW/sq cm and yielding 202 W at a 100 x 100 m rectenna.
    Keywords: SPACECRAFT PROPULSION AND POWER
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 40
    facet.materialart.
    Unknown
    On the determination of airplane model structure form flight data (1983)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: A procedure based on a modified stepwise regression and several selection criteria is presented for the determination of airplane model structure from flight data. The aerodynamic force and moment coefficients in an airplane model are expresed either as polynomials in output and input variables or as a combination of splines. The procedure is demonstrated in three examples by attempting to determine a local, extended and global model. Some of the resulting models are verified by using the maximum likelihood estimation or by examining model prediction capabilities.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 41
    facet.materialart.
    Unknown
    Analysis of electromagnetic fields on an F-106B aircraft during lightning strikes (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Information on the exterior electromagnetic environment of an aircraft when it is struck by lightning has been obtained during thunderstorm penetrations with an F-106B aircraft. Electric and magnetic fields were observed, using mainly time-derivative type sensors, with bandwidths to 50 MHz. Lightning pulse lengths ranging from 25 ns to 7 microsec have been recorded. Sufficient high-frequency content was present to excite electromagnetic resonances of the aircraft, and peaks in the frequency spectra of the waveforms in the range 7 to 23 MHz are in agreement with the resonant frequencies determined in laboratory scale-model tests. Both positively and negatively charged strikes were experienced, and most of the data suggest low values of peak current.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 42
    facet.materialart.
    Unknown
    A programmable power processor for high power space applications (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: A Programmable Power Processor (P3) has been developed for application in future large space power systems. The P3 is capable of operation over a wide range of input voltage (26 to 375 Vdc) and output voltage (24 to 180 Vdc). The peak output power capability is 18 kW (180 V at 100 A). The output characteristics of the P3 can be programmed to any voltage and/or current level within the limits of the processor and may be controlled as a function of internal or external parameters. Seven breadboard P3s and one 'flight-type' engineering model P3 have been built and tested both individually and in electrical power systems. The programmable feature allows the P3 to be used in a variety of applications by changing the output characteristics. Test results, including efficiency at various input/output combinations, transient response, and output impedance, are presented.
    Keywords: SPACECRAFT PROPULSION AND POWER
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 43
    facet.materialart.
    Unknown
    Experimental and systems studies of the alkali metal thermoelectric converter for aerospace power (1983)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Previously cited in issue 15, p. 2361, Accession no. A82-31876
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: Journal of Energy (ISSN 0146-0412); 7; 442-448
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 44
    facet.materialart.
    Unknown
    AFTI/F-16 flight test results and lessons (1983)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The AFTI/F-16 flight test program is summarized, and several design issues of general interest are addressed. A brief description is given of the test vehicle, its flight control modes, and the flight envelopes in which testing was performed. Flight test results are summarized by addressing benefits experienced in flight control task-tailoring, handling qualities in mission tasks, aircraft structure considerations, digital flight control system performance, and human factors. Finally, several design issues relevant to future fighter aircraft are examined, including degraded flight control, system complexity, simplex information in redundant systems, and single failure propagation in redundant systems.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 45
    facet.materialart.
    Unknown
    Analysis of potential helicopter vibration reduction concepts (1984)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Description: Several recent helicopter vibration reduction research programs are described. Results of studies of blade design parameters in rotor vibratory response and of an advanced blade design for reduced vibration are examined. An optimization approach to develop a general automated procedure for rotor blade design is described, and analytical results for an articulated rotor operating at a steady 160 kt flight condition are reported. The use of a self-adaptive controller to implement higher harmonic control in closed-loop fashion is addressed, and a computer simulation used to evaluate and compare the performance of alternative algorithms included in the generic active controller is discussed. Results are presented for steady level flight conditions, short-duration maneuvers, blade stresses and rotor performance, blade-appended aeroelastic devices, vibratory airloads, wake-induced blade airloads, and airloads from blade motions, the interaction of rotor and fuselage, and the interaction of rotor and empennage.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 46
    facet.materialart.
    Unknown
    Plume radiation heat transfer: Radiation transfer with scattering (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: JANNAF Handbook: Rocket Exhaust Plume Technol., Chapter 5; 13 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 47
    facet.materialart.
    Unknown
    Plume radiation heat transfer: Prediction techniques with scattering (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: JANNAF Handbook: Rocket Exhaust Plume Technol., Chapter 5; 19 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 48
    facet.materialart.
    Unknown
    Plume radiation heat transfer: Spatial integration procedures (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: JANNAF Handbook: Rocket Exhaust Plume Technol., Chapter 5; 19 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 49
    facet.materialart.
    Unknown
    Plume radiation heat transfer: Spectrally averaged parameters (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: JANNAF Handbook: Rocket Exhaust Plume Technol., Chapter 5; 11 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 50
    facet.materialart.
    Unknown
    Plume radiation heat transfer: Band models (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: JANNAF Handbook: Rocket Exhaust Plume Technol., Chapter 5; 22 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 51
    facet.materialart.
    Unknown
    Plume radiation heat transfer: Fundamentals (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: JANNAF Handbook: Rocket Exhaust Plume Technol., Chapter 5; 15 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 52
    facet.materialart.
    Unknown
    Plume radiation heat transfer (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: JANNAF Handbook: Rocket Exhaust Plume Technol., Chapter 5; 5 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 53
    facet.materialart.
    Unknown
    Base flow simulation: Hot flow simulation for base heating analysis (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: JANNAF Handbook: Rocket Exhaust Plume Technol., Chapter 5; 16 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 54
    facet.materialart.
    Unknown
    Base flow simulation (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: JANNAF Handbook: Rocket Exhaust Plume Technol., Chapter 5; 5 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 55
    facet.materialart.
    Unknown
    Base flow simulation: Cold flow simulation for base pressure analysis (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: JANNAF Handbook: Rocket Exhaust Plume Technol., Chapter 5; 21 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 56
    facet.materialart.
    Unknown
    Plume backflow in a vacuum: Impingement environments (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: JANNAF Handbook: Rocket Exhaust Plume Technol., Chapter 5; 13 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 57
    facet.materialart.
    Unknown
    Plume backflow in a vacuum: Impingement flowfields (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: JANNAF Handbook: Rocket Exhaust Plume Technol., Chapter 5; 6 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 58
    facet.materialart.
    Unknown
    Plume backflow in a vacuum: Free molecular plumes (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: JANNAF Handbook: Rocket Exhaust Plume Technol., Chapter 5; 4 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 59
    facet.materialart.
    Unknown
    Plume backflow in a vacuum: Onset of rarefaction (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: JANNAF Handbook: Rocket Exhaust Plume Technol., Chapter 5; 7 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 60
    facet.materialart.
    Unknown
    Plume backflow in a vacuum: Viscous - inviscid coupling (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: JANNAF Handbook: Rocket Exhaust Plume Technol., Chapter 5; 10 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 61
    facet.materialart.
    Unknown
    Plume backflow in a vacuum: Continuumm plume (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: JANNAF Handbook: Rocket Exhaust Plume Technol., Chapter 5; 16 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 62
    facet.materialart.
    Unknown
    Multiple engines: Non-symmetrical engine arrangements (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: JANNAF Handbook: Rocket Exhaust Plume Technol., Chapter 5; 25 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 63
    facet.materialart.
    Unknown
    Plume backflow in a vacuum: Nozzle boundary layers (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: JANNAF Handbook: Rocket Exhaust Plume Technol., Chapter 5; 7 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 64
    facet.materialart.
    Unknown
    Multiple engines: Dual engines (in-line multiple engines) (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: JANNAF Handbook: Rocket Exhaust Plume Technol., Chapter 5; 33 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 65
    facet.materialart.
    Unknown
    Multiple engines: Symmetrical engine arrangements (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: JANNAF Handbook: Rocket Exhaust Plume Technol., Chapter 5; 100 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 66
    facet.materialart.
    Unknown
    Multiple engines (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: JANNAF Handbook: Rocket Exhaust Plume Technol., Chapter 5; 13 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 67
    facet.materialart.
    Unknown
    Single engine (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: JANNAF Handbook: Rocket Exhaust Plume Technol., Chapter 5; 109 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 68
    facet.materialart.
    Unknown
    Single engine: Plume induced flow separation (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: JANNAF Handbook: Rocket Exhaust Plume Technol., Chapter 5; 39 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 69
    facet.materialart.
    Unknown
    Recommended procedure for selecting methodology (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: JANNAF Handbook: Rocket Exhaust Plume Technol., Chapter 5; 12 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 70
    facet.materialart.
    Unknown
    Methodology selection plan (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: JANNAF Handbook: Rocket Exhaust Plume Technol., Chapter 5; 13 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 71
    facet.materialart.
    Unknown
    Historical development of base flow predictive methods (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: JANNAF Handbook: Rocket Exhaust Plume Technol., Chapter 5; 19 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 72
    facet.materialart.
    Unknown
    JANNAF Handbook: Rocket Exhaust Plume Technology. Chapter 5: Base flow. Problem definition (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: JANNAF Handbook: Rocket Exhaust Plume Technol., Chapter 5; 27 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 73
    facet.materialart.
    Unknown
    JANNAFF Handbook: Rocket Exhaust Plume Technology. Chapter 5: Base flow. Nomenclature (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: JANNAFF Handbook: Rocket Exhaust Plume Technol., Chapter 5; 5 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 74
    facet.materialart.
    Unknown
    JANNAF Handbook: Rocket exhaust plume technology. Chapter 5: Base flow. Introduction (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: JANNAFF Handbook: Rocket Exhaust Plume Technol., Chapter 5; 5 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 75
    facet.materialart.
    Unknown
    Improved performance design of gallium arsenide solar cells for space (1984)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Description: An improved design, shallow junction heteroface, n-p, gallium arsenide solar cell for space applications is reported, with a predicted AM0 efficiency in the 21.9 to 23.0 percent range. The optimized n-p structure, while slightly more efficient, has the added advantage of being less susceptible to radiation-induced degradation by virtue of this thin top junction layer. Detailed spectral response curves and an analysis of the loss mechanisms are reported. The details of the design are readily measurable. The optimized designs were reached by quantifying the dominant loss mechanisms and then minimizing them by using computer simulations.
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: IEEE Transactions on Electron Devices (ISSN 0018-9383); ED-31; 689-695
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 76
    facet.materialart.
    Unknown
    Microwave-powered, unmanned, high-altitude airplanes (1984)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: Journal of Aircraft (ISSN 0021-8669); 21; 966-970
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 77
    facet.materialart.
    Unknown
    Nuclear-electric power in space (1984)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Description: Prospective missions requiring large power supplies that might be satisfied with space nuclear reactors (SNR) are discussed, along with design concepts and problems and other potential high-power space systems. Having a minimum economic output of 10 kWe, SNR seem well-suited as the power sources for DBS systems, space-based ATC systems manned planetary missions, an expanding Space Station, materials processing, and outer planets missions. SNR avoid the large area problems of solar cell arrays, short lifetimes of thermionic converters, and vibration and heat control in Stirling engines. Design problems exist for SNR in the heat transfer and rejection systems, radioactive emissions and degradation of reactor materials, and size. The latter is a function of Shuttle payload constaints and raises the possibility of having to load the fuel while in orbit. The earliest operational date of SNRs is projected for the early 1990s, if progress is good in the current SP-100 program.
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: IEEE Spectrum (ISSN 0018-9235); 21; 58-65
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 78
    facet.materialart.
    Unknown
    100 kWe magnetoplasmadynamic thruster system design (1984)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: Journal of Spacecraft and Rockets (ISSN 0022-4650); 21; 563-572
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 79
    facet.materialart.
    Unknown
    The X-29 flight-research program (1984)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Description: The X-29 experimental aircraft, which is a technology integration and evaluation platform for such features as static longitudinal instability, sweptforward wings and three-surface longitudinal control, offers an opportunity to validate the entire aircrft design process through careful correlation and comparison of flight test results with wind tunnel results and design predictions. Attention is presently given to the design features of the aircraft, which encompass supercritical airfoils, digital flight control, and aeroelastically tailored composite wings, as well as to the flight test program that was formulated to investigate the interactions and relative merits of these design features, in light of data gathered by carefully positioned sensors.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: AIAA Student Journal (ISSN 0001-1452); 22; 2-12
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 80
    facet.materialart.
    Unknown
    Use of multiblade sensors for on-line rotor tip-path plane estimation (1980)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Techniques are investigated for on-line estimation of rotor states in the nonrotating frame from multiple, simultaneous measurements in the rotating frame. The multiblade coordinate transformation is first applied to transform both flapping and flapping rate measurements into the nonrotating frame. The 'observer' approach is then used to generate algorithms for estimating tip-path plane rate and attitude from transformed flapping and flapping rate measurements. A numerical evaluation using simulated measurements is conducted to evaluate the performance of the algorithms and recommendations are made.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: American Helicopter Society; vol. 25
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 81
    facet.materialart.
    Unknown
    Origin of reverse annealing in radiation-damaged silicon solar cells (1980)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: The paper employs relative defect concentrations, energy levels, capture cross sections, and minority carrier diffusion lengths in order to identify the defect responsible for the reverse annealing observed in a radiation damaged n(+)/p silicon solar cell. It is reported that the responsible defect, with the energy level at +0.30 eV, has been tentatively identified as boron-oxygen-vacancy complex. In conclusion, it is shown that removal of this defect could result in significant cell recovery when annealing at temperatures well below the currently required 400 C.
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: Applied Physics Letters; 36; Apr. 15
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 82
    facet.materialart.
    Unknown
    The promise of multicyclic control (1980)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: The rough ride a helicopter endures is known to be self-generated. This roughness results in fatiguing blade loads and vibration which can be eliminated or greatly reduced by multicyclic control. Rotor performance may also be improved. Several types of rotors which have employed multicyclic control are reviewed and compared. Their differences are highlighted and their potential advantages and disadvantages are discussed. The flow field these rotors must operate in is discussed, and it is shown that simultaneous elimination of vibration and oscillatory blade loads is not an inherent solution to the roughness problem. The use of rotor blades and energy absorbers is proposed. Input-output relations are considered and a gain control for ROMULAN, a multicyclic controlling computer program, is introduced. Implications of the introduction of multicyclic systems into helicopters are also discussed.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: Vertica; 4; 1, 19; 1980
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 83
    facet.materialart.
    Unknown
    Measurements of cabin and ambient ozone on B747 airplanes (1980)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: In response to recent concerns over possibly high ozone levels in the cabins of aircraft flying in the stratosphere, simultaneous measurements of the cabin and ambient ozone levels have been made as part of the NASA Global Atmospheric Sampling Program. Examples of the data taken on commercially operated Boeing 747-100 and 747SP airplanes are given for selected flights, together with summary statistics of over 5600 observations. Cabin ozone levels vary with the ambient level and, for unmodified aircraft, are higher on the 747SP than on the 747-100. Modifications to the ventilation system of the 747SP reduced cabin ozone levels by varying amounts up to a factor of 14.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: Journal of Aircraft; 17; Apr. 198
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 84
    facet.materialart.
    Unknown
    Liquid fluorine/hydrazine rhenium thruster update (1983)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The status of a fluorine/hydrazine thruster development program is discussed. A solid rhenium metal sea-level thrust chamber was successfully fabricated and tested for a total run duration of 1075 s with 17 starts. Rhenium fabrication methods are discussed. A test program was conducted to evaluate performance and chamber cooling. Acceptable performance was reached and cooling was adequate. A flight-type injector was fabricated that achieved an average extrapolated performance value of 3608 N-s/kg (368 lbf-s/lbm). Altitude thrust chambers were fabricated. One chamber incorporates a rhenium combustor and nozzle with an area ratio of 15:1, and a columbium nozzle extension with area ratios from 15:1 to 60:1. The other chamber was fabricated completely with a carbon/carbon composite. Because of the attributes of rhenium for use in high-temperature applications, a program to provide the materials and processes technology needed to reliably fabricate and/or repair vapor-deposited rhenium parts of relatively large size and complex shape is recommended.
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: APL The 1983 JANNAF Propulsion Meeting, Vol. 1; p 85-90
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 85
    facet.materialart.
    Unknown
    Synthetic battery cycling techniques (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The group of techniques that as a class are referred to as synthetic battery cycling are described with reference to spacecraft battery systems. Synthetic battery cycling makes use of the capability of computer graphics to illustrate some of the basic characteristics of operation of individual electrodes within an operating electrochemical cell. It can also simulate the operation of an entire string of cells that are used as the energy storage subsystem of a power system.
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: ESA 4th ESTEC Spacecraft Power-Conditioning Seminar; p 129-134
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 86
    facet.materialart.
    Unknown
    Nickel-hydrogen bipolar battery system (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Rechargeable nickel-hydrogen systems are described that more closely resemble a fuel cell system than a traditional nickel-cadmium battery pack. This was stimulated by the currently emerging requirements related to large manned and unmanned low Earth orbit applications. The resultant nickel-hydrogen battery system should have a number of features that would lead to improved reliability, reduced costs as well as superior energy density and cycle lives as compared to battery systems constructed from the current state-of-the-art nickel-hydrogen individual pressure vessel cells.
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: ESA 4th ESTEC Spacecraft Power-Conditioning Seminar; p 115-121
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 87
    facet.materialart.
    Unknown
    The tilt rotor research aircraft (XV-15) program (1983)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The tilt rotor concept is introduced and the performance capabilities and noise characteristics of the XV-15 aircraft are discussed. In hover, the aircraft is lifted by the two wing tip mounted rotors with the nacelles in the vertical position. In this flight mode, the vehicle is a twin rotor helicopter and is controlled by rotor cyclic and collective controls. The aircraft can fly as a helicopter or tilt the nacelle to the propeller mode and operate as a fixed-wing twin turboprop airplane. It is also possible to stop the conversion at any intermediate angle and fly continuously or reconvert. The rotors are powered by two modified T-53 engines and the power train includes a cross shaft located in the wing, to allow for the engine failure case and still retain power to both rotors.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: American Planning Association Proc. of the Monterey Conf. on Planning for Rotorcraft and Commuter Air Transportation; p 24-33
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 88
    facet.materialart.
    Unknown
    The quiet short-haul research aircraft (1983)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The design concepts, performance capabilities, and projected applications of the Quiet Short-Haul Research Aircraft (QSRA) are discussed. The propulsive lift system of the QSRA provides the lift required for short field operations at low community noise levels. This system consists of four high bipass ratio, geared turbofan engines mounted so that the engine exhaust flows across the upper surface of the wing (upper surface blowing). Large specially shaped flaps behind each engine control the direction of the flow for each phase of flight. A 95 passenger short haul transport based on this technology could operate out of a 2500 foot runway with a combined takeoff and landing 90 EPNdB footprint area of 2.7 sq mi.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: American Planning Association Proc. of the Monterey Conf. on Planning for Rotorcraft and Commuter Air Transportation; p 22-23
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 89
    facet.materialart.
    Unknown
    Hydrogen chloride measurements in the Space Shuttle exhaust cloud - First launch, April 12, 1981 (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Partitioning of hydrogen chloride between the aerosol and gaseous phases in the first Space Shuttle exhaust cloud was experimentally investigated as the exhaust cloud was diluted with ambient air. Airborne measurements were obtained of gaseous hydrogen chloride (HCl), total HCl, relative humidity, and temperature to determine the conditions controlling HCl aerosol formation in the Shuttle exhaust cloud. Two segments of the cloud, each at a significantly different relative humidity, were monitored. Equilibrium predictions of HCl aerosol formation agreed with the measured HCl partitioning at the higher and lower relative humidity conditions, but do not agree at the aerosol formation threshold region. Measurements were taken in the Shuttle exhaust cloud from 8.6 min until 2 h and 8 min after launch. HCl concentrations ranged from 17.5 to 0.9 ppm and relative humidity from 86% to less than 10%.
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: Journal of Spacecraft and Rockets; 19; July-Aug
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 90
    facet.materialart.
    Unknown
    Minimum fuel horizontal flight paths in the terminal area (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: (Previously announced in STAR as N81-29133)
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 91
    facet.materialart.
    Unknown
    Why twin-fuselage aircraft (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Operational and design features of twin-fuselage aircraft are outlined, noting capabilities of transporting 100-400 passengers at subsonic speeds at an efficiency of around 190 passenger mi/gal. Wings for two body aircraft are lighter and are designed more from an aerodynamics point of view due to reductions in the bending moment. A 280 passenger configuration would need a 172 ft wingspan, compared to a 155 ft wingspan for a conventional aircraft, but the conventional wings would have a larger area. The higher aspect ratio contributed to the increased efficiency of the twin body operation. A lower wetted fuselage area is calculated for the two body aircraft with passenger capacities over 190, and twin fuselages are shown to have a higher passenger packaging density than double-deck widebodies. Finally, simple compounding of existing aircraft such as the DC-9 into a two-body shape is projected to offer a 1.9 factor increase in passenger mi/gal.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: Astronautics and Aeronautics; 20; Apr. 198
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 92
    facet.materialart.
    Unknown
    Measuring the spacecraft and environmental interactions of the 8-cm mercury ion thrusters on the P80-1 mission (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The subject interface measurements are described for the Ion Auxiliary Propulsion System (IAPS) flight test of two 8-cm thrusters. The diagnostic devices and the effects to be measured include: 1) quartz crystal microbalances to detect nonvolatile deposition due to thruster operation; 2) warm and cold solar cell monitors for nonvolatile and volatile (mercury) deposition; 3) retarding potential ion collectors to characterize the low energy thruster ionic efflux; and 4) a probe to measure the spacecraft potential and thruster generated electron currents to biased spacecraft surfaces. The diagnostics will also assess space environmental interactions of the spacecraft and thrusters. The diagnostic data will characterize mercury thruster interfaces and provide data useful for future applications.
    Keywords: SPACECRAFT PROPULSION AND POWER
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 93
    facet.materialart.
    Unknown
    Chasing the Space Shuttle (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The use and modifications of the T-38 aircraft as chase planes for the STS-1 landing are discussed. Two planes tracked the approach at Edwards AFB, with the lead plane responsible for airspeed and altimetry calibration, technical photography, landing gear status, and height-above-touchdown calls; the second T-38 provided live TV and back-up. Modifications included extension of the landing gear extension speed, increasing the area of the speedbrakes, and installation of a TV system; the goal was to stay with the Shuttle below 40,000 ft while it descended at 15,000 ft/min. Ten T-38's were modified and the deployment of lead and back-up crews during the first Shuttle flight is outlined. Western Test Range C-band radar data of the Orbiter position were transformed into intercept coordinates and VHF relayed to the chase craft. Photographs were taken of the right and left sides and underside of the Shuttle while flying with the speedbrake up to match the Shuttle speed.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 94
    facet.materialart.
    Unknown
    Development of a comprehensive analysis for rotorcraft. II - Aircraft model, solution procedure and applications (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The development of a comprehensive analytical model of rotorcraft aerodynamics and dynamics is described. Particular emphasis is given to describing the reasons behind the choices and decisions involved in constructing the model. The analysis is designed to calculate rotor performance, loads and noise; helicopter vibration and gust response; flight dynamics and handling qualities; and system aeroelastic stability. It is intended for use in the design, testing and evaluation of a wide class of rotors and rotorcraft and to be the basis for further development of rotary wing theories. The general characteristics of the geometric, structural, inertial and aerodynamic models used for the rotorcraft components are described, including the assumptions introduced by the chosen models and the resulting capabilities and limitations. Finally, some examples from recent applications of the analysis are given.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: Vertica; 5; 3, 19; 1981
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 95
    facet.materialart.
    Unknown
    Design for supercommuters (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Action to be taken to prepare to implement efficient, modern commuter aircraft for the 1990s is outlined. The increase in the contribution of jet fuel costs to aircraft direct operating costs (DOC) is noted as the motivation for the introduction of turboprop-powered commuter aircraft, which use 15-20% less fuel per seat mile at short stage lengths, to replace larger jet transports. Designs proposed by various manufacturers which will make use of existing technology for 19-, 30- and 50-seat aircraft capable of carrying a full payload of passengers and baggage for 600 n mi and optimized for minimum DOC over a 100-n mi stage length are presented, and the improvements in fuel usage, DOC and passenger comfort to be obtained with the use of advanced technology are pointed out. The goals and considered technologies of the dedicated small-transport aircraft technology program recommended by a commuter air transport subcommittee of the NASA Advisory Council Aeronautics Advisory Committee to speed the development of commuter technology are then presented, with attention given to efforts of analysis, design and testing of propulsion systems, structures, aerodynamics and systems intended to result in 16-24% savings in DOC and up to 40% savings in fuel. The commuter development plans of various manufacturers are also indicated.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: Astronautics and Aeronautics; 19; Feb. 198
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 96
    facet.materialart.
    Unknown
    General aviation airplane fuel economy system model (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The aerodynamic characteristics which affect the fuel consumption of general aviation aircraft are outlined. All data are presented in the form of graphs.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: NASA. Langley Research Center Joint Univ. Program for Air Transportation Res., 1980; p 133-142
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 97
    facet.materialart.
    Unknown
    Illustration of airfoil shape effect on forward-swept wing divergence (1980)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: A static aeroelastic analysis is presented of the divergence of untapered wings with conventional and supercritical airfoil sections at sweep angles of zero and -15 deg. One bending and one torsion mode were employed for a uniform rectangular cantilevered beam with the elastic axis at midchord, and calculations were based on a two-dimensional differential equations formulation in the structural coordinate system and in simple strip theory. A minimum divergence speed in the transonic range is obtained which is associated with the rearward shift of the aerodynamic center, and a 17% difference in minimum divergence dynamic pressure is found between a supercritical and a conventional wing. It is noted that although the strip method employed allows the assessment of the sensitivity of airfoil shapes to divergence, three-dimensional transonic aerodynamic methods should be used to predict wing divergence characteristics.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: Journal of Aircraft; 17; Oct. 198
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 98
    facet.materialart.
    Unknown
    Laboratory investigations of cloud nuclei from combustion of Space Shuttle propellant (1980)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: Small quantities of solid rocket motor propellant, of the type to launch the Space Shuttle, were burned at ambient pressure in the laboratory to provide aerosol samples for characterization. A portion of each sample was injected into an isothermal cloud chamber and the remainder into a 770-liter holding tank. Portable ice nucleus (IN) counters, filter devices for IN determinations and a cloud condensation nucleus (CCN) counter sampled from the tank. The measurements show that particles resulting from the combustion of the propellant are active IN (3.3 times 10 to the 8th to 1.5 times 10 to the 11th/g active at 20 C). The portable counters and filters detected significantly fewer IN than the isothermal cloud chamber. The propellant aerosol is a prolific source of CCN that swamped the instrument.
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: Journal of Applied Meteorology; 19; Feb. 198
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 99
    facet.materialart.
    Unknown
    Middle atmosphere NO/x/ production due to ion propulsion induced radiation belt proton precipitation (1980)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The suggestion that keV Ar(+) resulting from ion propulsion operations during solar power satellite construction could cause energetic proton precipitation from the inner radiation belt is examined to determine if such precipitation could cause significant increases in middle atmosphere nitric oxide concentrations thereby adversely affecting stratospheric ozone. It is found that the initial production rate of NO (mole/cu cm-sec) at 50 km is 130 times that due to nitrous oxide reacting with excited oxygen. However, since the time required to empty the inner belt of protons is about 1 sec and short compared to the replenishment time due to neutron decay, precipitation of inner radiation belt protons will have no adverse atmospheric environmental effect.
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: Space Solar Power Review; 1; 3, 19; 1980
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 100
    facet.materialart.
    Unknown
    Electric propulsion (1982)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: An alternative propulsion subsystem for MSAT is presented which has a potential of reducing the satellite weight by more than 15%. The characteristics of pulsed plasma and ion engines are described and used to estimate of the mass of the propellant and thrusters for attitude control and stationkeeping functions for MSAT. Preliminary estimates indicate that the electric propulsion systems could also replace the large momentum wheels necessary to counteract the solar pressure; however, the fine pointing wheels would be retained. Estimates also show that either electric propulsion system can save approximately 18% to 20% of the initial 4,000 kg mass. The issues that require further experimentation are mentioned.
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: Land Mobile Satellite Serv. (LMSS): A Conceptual System Design and Identification of the Critical Technol.; 7 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
Close ⊗
This website uses cookies and the analysis tool Matomo. More information can be found here...