ALBERT

Description: The development of this paper was inspired by the increase in the number of different eco-label like quality assurance schemes established in the European Union in the past few years. These schemes are flooding the market and the researchers raise the question, is there enough credibility in these schemes? This piece of research is based on 58 eco-labeling like food schemes and dissects them into the building blocks of the different factors that makes a scheme credible and analyses the structure of these blocks as well as a literature survey on the perceptions of both the consumers and producers to these schemes. The sort of credibility structure that the building blocks of the schemes (ownership, stakeholder dialogue, traceability, transparency, etc.) have created was discussed and it was questioned if they meet the expectations of the consumers. The main findings of the research indicate that although small groups of consumers may be satisfied with a number of the different schemes, the majority of them fall short of providing a credible quality assurance scheme. Improvements were suggested such as involving a more diverse range of stakeholders and expanding the responsibility of processors and retailers. An alternative to the current form of labeling is also discussed.

Description: Selbstverständlich schafft Windenergie Arbeitsplätze. Betrachtet man die Studie des Bremer Energie-Institutes näher, so zeigen sich einige methodische Schwächen und wenig plausible Annahmen. Von einer "nüchternen Analyse" kann deswegen nicht gesprochen werden.

Description: New energy efficiency policies have been introduced around the world. Historically, most energy models were reasonably equipped to assess the impact of classical policies, such as a subsidy or change in taxation. However, these tools are often insufficient to assess the impact of alternative policy instruments. We evaluate the so-called engineering economic models used to assess future industrial energy use. Engineering economic models include the level of detail commonly needed to model the new types of policies considered. We explore approaches to improve the realism and policy relevance of engineering economic modeling frameworks. We also explore solutions to strengthen the policy usefulness of engineering economic analysis that can be built from a framework of multidisciplinary cooperation. The review discusses the main modeling approaches currently used and evaluates the weaknesses in current models. We focus on the needs to further improve the models. We identify research priorities for the modeling framework, technology representation in models, policy evaluation, and modeling of decision-making behavior.

Description: This book presents important new research on applied eco-efficiency concepts throughout Europe. The aim of eco-efficiency is to achieve market-based measures of environmental protection, in order to enhance the prospects for sustainable development and achieve positive economic and ecological benefits. The distinguished authors discuss a number of themes surrounding eco-efficiency including the necessary conditions for technological dissemination and ecological modernization, and the role of government in enabling businesses and society to participate actively in this process. In particular, they highlight the application of existing European-based policies concerning material flows and energy. The authors also investigate some new concepts of sustainable development and provide a useful introduction to material flows analysis. In further chapters they study the emerging regulatory policies for eco-efficiency, and examine the issues of sustainable business and consumption strategies.

Description: Transnational corporations' (TNCs) economic operations cover numerous countries and can be diverted between several continents. These units have reached a level of significance, having not only economic, but also social and environmental implications. This justifies that they shall be treated separately as a social phenomenon, when considering strategies for the development towards sustainability. This paper presents the concept of Responsible Corporate Governance (RCG), as a strategy to "govern" TNCs. RCG is suggested as a stakeholder based policy instrument, which aims at allocating responsibilities to societal actors aiming at corporate accountability. RCG recognises that the process of societal change is strongly based on what can be called as bottom up-processes. Learning processes take place through the interaction of the different societal members, which eventually leads to macro changes. Therefore, governing TNCs towards sustainability improvements is considered to be a collective process including all stakeholders. Firstly, the paper places the concept of RCG in the ongoing debate of political modernization based on the fact that society develops overtime and the political system must correspondingly modernize. In this context, political overload developed as a consequence of increased resource interdependencies is explained and as a resolution, network approach is discussed. Secondly, demands on the orientation of the TNCs in terms of accountability and innovative action are brought forward. Here, the paper also lists down corporate elements (stakeholder empowered corporate governance, management and performance evaluation systems, transparency enhancement and accountability verification), which need to be in place to attain an accountable orientation in the society. Following, using an analytical framework, the orientation and capabilities of each societal actor (environmental non-governmental organisations, financial institutions, intergovernmental organisations) to affect improvements in the corporate responsibility elements are investigated and recommendations for their effective orientation are listed.

Description: In jedem Unternehmen gibt es Potenziale, um die eigene wirtschaftliche Position zu verbessern und sich gegen zukünftige Krisen abzusichern. Technische, organisatorische oder soziale Innovationen sind der Schlüssel zur dauerhaften Sicherung ihrer Wettbewerbsposition. Diese Broschüre soll kleinen und mittelständischen Unternehmen helfen, Bereiche zu finden, in denen Innovationspotenziale vorhanden sind. Anhand erster Maßnahmen, so genannten Innovationsschritten, werden Ansatzpunkte entwickelt, wie mit möglichst geringem (Zeit- und Kosten-) Aufwand gezielt die eigene Wettbewerbsposition gestärkt werden kann. Sie wendet sich an Unternehmensleitung oder Umweltmanagementbeauftragte und gibt ihnen einen ersten Ein- bzw. Überblick und konkrete Vorschläge, wie sie die Zukunftsfähigkeit ihres Unternehmens verbessern können. Damit hat diese Broschüre konkrete Hilfestellungen für den Praktiker im Unternehmen im Fokus. Mögliche Ansatzpunkte, geeignete Wege sowie passende Instrumente werden für einzelne Bereiche aufgezeigt und erläutert.

Description: Diese Studie untersucht die Medien, die sanktionsbereiten Konsumenten Informationen über die Verantwortung von Unternehmen als Orientierungshilfe für den Einkauf anbieten. Im Brennpunkt stehen dabei sozial-ökologisch orientierte Einkaufsführer, die vergleichende Unternehmensbewertungen mit dem Ziel anbieten, Verbrauchern eine Informationsgrundlage für positive und negative Sanktionen zu geben, um einen positiven Profilierungswettbewerb in Gang zu setzen. Dabei gilt das besondere Interesse dem Übergang vom Printmedium zum Internetauftritt. Ziel der Untersuchung ist eine Analyse fördernder und hemmender Faktoren für den Erfolg, die für die Praxis nützlich sein soll.

Description: Infrastrukturen und Infrastrukturpolitik nehmen einen entscheidenden Einfluss auf die Nachhaltigkeit eines Landes. Betrachtet man die (Fehl-) Entwicklungen des letzten Jahrhunderts in den Industrieländern, so ist zu erkennen, dass die derzeitigen Energie-, Verkehrs- und Wasserinfrastrukturen selbst den Anforderungen einer ökonomischen Nachhaltigkeit nicht gewachsen sind. Ihre sozialen und ökologischen Folgen wurden zudem meist vernachlässigt und spielten bei Entscheidungsprozessen nur eine nachrangige Rolle. Große Herausforderungen liegen vor den Industrieländern, wenn sie nachhaltige Infrastrukturen schaffen wollen - und gar eine Leitbildfunktion für Schwellen- und Entwicklungsländer im 21. Jahrhundert einnehmen möchten. Denn durch die Intensivierung der weltweiten Austauschbeziehungen werden die nicht-nachhaltigen Infrastrukturkonzepte und -politiken der Industrieländer zunehmend auf Entwicklungsländer übertragen. Eine Umorientierung muss deshalb auch im Süden erfolgen. Dieses Wuppertal Paper bietet am Beispiel der drei wichtigen Sektoren Energie, Verkehr und Wasser Ansätze einer nachhaltigen Infrastrukturpolitik. Dazu gehören sowohl globale Lösungsstrategien als auch spezifische Instrumente für die Länder des Nordens oder des Südens. Im Rahmen von sektoralen Fallstudien werden die Schwellenländer Brasilien (Energie), China (Verkehr) und Indonesien (Wasser) betrachtet. Zudem werden Strategien und Erfolgsfaktoren für eine an Nachhaltigkeitszielen orientierte Transferpolitik skizziert, wobei auch auf die Bedeutung von Bildung und die Rolle internationaler Finanzinstitutionen (am Beispiel der Weltbank) eingegangen wird. Um die großen Herausforderungen einer globalen nachhaltigen Entwicklung zu bewältigen, schlägt dieses Papier vor, mehrere Strategien parallel zu verfolgen. Im Norden sind die gegenwärtigen ressourcenintensiven, nicht-nachhaltigen Infrastrukturen zu überdenken. Im Süden sollte der Pfad der "nachholenden Entwicklung" verlassen und im Sinne eines ökologischen "leapfrogging" der Sprung in post-fossile Infrastrukturen angestrebt werden, um nicht die Fehler des Nordens zu wiederholen. Länderspezifische Lösungen sollten dabei an die Stelle eines Imports nicht-angepasster Infrastrukturen treten. Der Transfer und Austausch von Ideen, Konzepten und Lösungen kann dabei einen wesentlichen Beitrag leisten, wobei eine unidirektionale Entwicklungszusammenarbeit von Nord nach Süd nicht ausreicht. Auch Süd-Süd oder Süd-Nord-Kooperationen eröffnen wichtige Chancen. Zudem ist der industrieländerzentrische, Technologie orientierte Ansatz einer einfachen Optimierung der supply-side zu verlassen zugunsten einer Handlungsstrategie, die ein nachhaltiges demand-side-management integriert.

Description: An increasing number of publications about theoretical approaches and new findings illustrate the relevance of the topic environmental risk assessment. The actual discussion about high oil prices is not incorporated under this headline; but it should be, as natural resource scarcity is a crucial economic factor. In practical experience, more and more banks, insurance companies as well as investors realize that there are certain areas with a high correlation between sustainable development and corporate success, corporate risk exposure and corporate performance. In this discussion one of the most obvious topics are risks related to climate change. According to the findings of surveys evaluated in this paper climate change starts to affect economic development and companies' performance in various ways. Over the next decade, economic losses due to climate change are estimated by US$ 150 billion per year. As result world's business leaders have described climate change as the biggest challenge of the 21st century. Hence, the incorporation of climate change as a risk factor is essential, but risks related to climate change feature a severe issue of complex structure and uncertainty; traditional risk assessment tools appear in the light of not being able to either reflect the multifaceted system nor provide sufficient outcomes. Environmental risk assessments in general so far have mainly emphasized - if at all - on actual and possible impacts of the release of materials or emissions (external effects). But an overall sustainable risk assessment has also to take into account the risks related to the inflow of materials. The main reason for neglecting the inflow risks from an environmental perspective can be seen in the fact that these risks seem to be less tangible and more uncertain. Nevertheless, in a world where economic development and the use of natural resources is not uncoupled yet, a steadily increasing economic power will result in a continually rising extraction of resources. As all resources are limited, the risk of scarcity will rise; and the example of water illustrates that it already exists. Indeed, scarcity is not tangible for all kind of resources from a present point of view. Hence, a specified analysis is needed considering different market and supply conditions. A comprehensive analysis of environmental risks needs to encompass risks affecting the output as well as the input side of a value chain. This paper enlarges the discussion on environmental risk assessments upon the input dimension using the example of carbon risks. Firstly, carbon risks are defined as risks related to climate change at the corporate level with a focus on the input as well as the output dimension. Secondly, an analysis of the current discussion on the topic of carbon risk evaluates the status quo of scientific work in this field. Thirdly, in terms of developing a practically oriented tool, the Value-at-Risk approach and it's application to measure input oriented carbon risks are scrutinized. The results discuss how future volatility and market prices can be utilized to describe the uncertainty resulting from markets acknowledging and pricing oil scarcity as a risk factor. Finally recommendations with a focus on strategic management decisions and financial performance analysis are given and further research opportunities are drawn. The conclusion is; once markets have acknowledged the depletion mid-point as a measure of oil scarcity, natural scarcity will result in a significant higher Value-at-Risk. The Value-at-Risk of one barrel of crude oil could then be as high as US$ 15.5 in the short term and even US$ 17.2 in the long term. The scope of this paper is neither intended to predict one likely development nor to demonstrate how this tool can actually work in terms of forecasting single companies' performance. But in order to point the way ahead, this paper provides scenarios for potential future developments and sets a frame for risk assessments due to oil scarcity.

Description: Der neoliberalen Globalisierung liegen Rationalitätsmuster zugrunde, die weder neu, noch liberal sind. Dies gilt für herrschaftliches Denken über Natur (als Ressource) ebenso wie für den sich verstärkenden Zugriff auf Naturgüter und die Ausblendung reproduktiver Elemente aus der Debatte über Umgangsweisen mit Natur. Mit Blick auf Landnutzung und Livelihood wird lokale Vielfalt durch Globalisierung zerstört. Der Absolutheitsanspruch eines weltweit entfesselten Marktes mit seinem grenzenlos freien Wettbewerb untergräbt das Recht auf- und die Möglichkeit zu je eigener, der Lokalität gemäßer Naturnutzung. Wenn immer mehr Menschen ihrer an die jeweiligen Lokalitäten gebundenen Produktionsmittel beraubt werden, können sich Gesellschaften nicht von innen heraus nachhaltig entwickeln.

Description: This paper examines the connection between globalisation, with its growth in world trade links, and certain ecological effects especially concerning "North-South" relations. Although world trade in the mid-nineties was significantly uncoupled from growth trends in the world economy, so that since then it has increased nearly three times faster than the global GDP, certain indicators of energy use and CO2 emissions have not developed proportionately to world trade; globalisation evidently does not lead to a situation where pressures on the environment are increasing to the same extent worldwide. This de-linking may, however, result in the kind of shifts that we examine here with reference to the material trade flows of the European Union. It will be shown that, in the course of globalisation, the countries of the EU have increasingly shifted environmental burdens on to the countries of the South, especially in the form of ecological rucksacks of imported raw materials, while at the same time reducing the pressure on their own domestic environment by extracting fewer material resources. Furthermore, goods whose production places intensive pressure on the environment (industrial emissions into the atmosphere and water, heavy metal emissions, etc.) have been increasingly imported from newly industrializing or developing countries. The greater covering of material requirements from foreign resources has served not so much the EU's internal consumption as its own production of export goods; this shows that the EU has an increasing share in the resource requirement of other economies. The paper concludes that it is absolutely necessary to consider the international dimension in any strategy for more productive use of resources in industrial countries. In the long term, the EU's resource use should also be reduced in absolute terms. This will also be necessary in order to reduce the pressure on the environment due to imports and exports.

Description: Die "Ökonomie der Aufmerksamkeit" hat zur Herausbildung spezifischer Märkte für Kommunikations-, Media- und Marketingdienstleistungen geführt. Ein dynamisch wachsender Markt ist der Markt für Live-Kommunikation, der in dieser Arbeit vertiefend untersucht wird. Hierbei werden drei Fragen diskutiert: 1. Was sind die treibenden Faktoren und Trends der Live-Kommunikation? 2. Nach welchen Maßstäben werden Events, insbesondere im Bereich der Unternehmenskommunikation, beauftragt? 3. Welche Chancen bestehen in diesem Markt, Events für Nachhaltigkeit als Marktsegment zu etablieren und zu stärken? Bei der Beantwortung dieser Fragen werden aktuelle Trendstudien ausgewertet, aber auch auf Untersuchungen und Fallstudien zurückgegriffen, die im Rahmen des Projektes "Eventkultur und Nachhaltigkeit" durchgeführt wurden. Die Autoren kommen zu dem Ergebnis, dass die Markt- und Trendstudien eine wichtige Orientierungsfunktion für die Eventwirtschaft haben. Aus der Perspektive eines kulturökonomischen Ansatzes wird kritisiert, dass diese Orientierungsfunktion auf Marken und Marketingtechniken beschränkt ist und der Einfluss der gesellschaftlichen Wertbildung auf die Marketingpraxis ausgeblendet bleibt. Nachhaltige Ziele und Inhalte werden mit den Mitteln des Event-Marketings erst vereinzelt vermittelt. Aus diesen ersten Aktivitäten kann aber ein neuer Kommunikationsmarkt entstehen, wenn seitens der Nachhaltigkeitsakteure eine Verständigung über Kriterien und Anforderungen an dieses Marketinginstrument erfolgt sowie der Symbolebene in der Nachhaltigkeitskommunikation eine stärkere Beachtung geschenkt wird. Informationsbündelung und symbolisches Management sind wichtige Ansatzpunkte, um in der Marketingpraxis von Unternehmen, öffentlichen Einrichtungen, Verbänden, NGOs und von Kommunikations- und Eventagenturen eine nachhaltige Eventkultur zu verankern.

Description: Contents include the following: Why are the mirrors segmented? Why lightweight segmented mirrors? Why cold (cryogenic) mirrors? Why a space telescope? How did NASA go about developing the mirror technology to enable this? Why was beryllium selected for JWST s mirrors? How are the Beryllium mirrors made? What happens to the mirrors once they are complete?

Description: Currently Mars missions can collect more data than can be returned. Future rovers of increased mission lifetime will benefit from onboard autonomous data processing systems to guide the selection, measurement and return of scientifically important data. One approach is to train a neural net to recognize spectral reflectance characteristics of minerals of interest. We have developed a carbonate detector using a neural net algorithm trained on 10,000 synthetic Vis/NIR (350-2500 nm) spectra. The detector was able to correctly identify carbonates in the spectra of 30 carbonate and noncarbonate field samples with 100% success. However, Martian dust coatings strongly affect the spectral characteristics of surface rocks potentially masking the underlying substrate rock. In this experiment, we measure Vis/NIR spectra of calcite coated with different thicknesses of palagonite dust and evaluate the performance of the carbonate detector.

Description: A transient torque method was developed to rapidly and simultaneously determine the viscosity and electrical conductivity of liquid metals and molten semiconductors. The experimental setup of the transient torque method is similar to that of the oscillation cup method. The melt sample is sealed inside a fused silica ampoule, and the ampoule is suspended by a long quartz fiber to form a torsional oscillation system. A rotating magnetic field is used to induce a rotating flow in the conductive melt, which causes the ampoule to rotate around its vertical axis. A sensitive angular detector is used to measure the deflection angle of the ampoule. Based on the transient behavior of the deflection angle as the rotating magnetic field is applied, the electrical conductivity and viscosity of the melt can be obtained simultaneously by numerically fitting the data to a set of governing equations. The transient torque viscometer was applied successfully to measure the viscosity and electrical conductivity of high purity mercury at 53.4 C. The results were in excellent agreement with published data. The method is nonintrusive; capable of rapid measurement of the viscosity of toxic, high vapor pressure melts at elevated temperatures. In addition, the transient torque viscometer can also be operated as an oscillation cup viscometer to measure just the viscosity of the melt or as a rotating magnetic field method to determine the electrical conductivity of a melt or a solid if desired.

Description: The Integrated Science Instrument Module of the James Webb Space Telescope is described from a systems perspective with emphasis on unique and advanced technology aspects. The major subsystems of this flight element are described including: structure, thermal, command and data handling, and software.

Description: The extension of dielectric and inductive spectroscopy into in situ observations represents a significant exploration-enabling tool. This technology can be widely applied from microscopic to macroscopic. Dielectrometry and inductometry can measure sub-surface composition and its distribution. The primary environment that we cannot easily explored is the sub-surface of solid bodies. Weather as part of our equipment that we bring with us, or the locations we are exploring. These fundamental questions lie at the core of the exploration Initiative. To answer them we must use a whole host of complimentary tools including those that allow us to practically examine the sub-surface environment. A nondestructive approach offers significant advantages for both the initial identification of likely samples but also the monitoring of ecosystems and crew health. These include materials characterization, nondestructive inspection, and process quality control, damage monitoring, and hidden object detection and identification. The identification of natural resources such as water on the Moon or Mars is of great importance to the utilization of local resource in the support of human exploration crews. On the macroscopic scale, the understanding of what resources are available and how they are distributed is of primary importance to their productive utilization. Even if initial explorations do not require the use of local resources to succeed, eventual settlement and commercial development will. The routine examination of the structural integrity (micro cracks, leaks) of hi.inafi habitats in harsh envkmments ww!d also be enabled.

Description: The GLAST Large Area Telescope (LAT), successor to Energetic Gamma-ray Experiment Telescope (EGRET) on the Compton Observatory, will play an important role in multiwavelength studies during the second half of this decade. Operating at energies between 20 MeV and greater than 300 GeV with sensitivity 30 or more times greater than that of EGRET, the Large Area Telescope (LAT) will offer good spatial and time resolution over a large (less than 2 sr) field of view. The LAT will bring insight to the whole range of high-energy gamma-ray phenomena, including bursts, active galactic nuclei, pulsars, supernova remnants, diffuse emission and unidentified sources. In essentially all cases, the maximum scientific return will come from coordinated (although not necessarily simultaneous) multiwavelength observations. Particularly with its planned scanning mode of operation, GLAST will have full sky coverage on relatively short time scales. The LAT team looks forward to cooperating with observers at other wavelengths.

Description: "Introduction to AIRS and CrIS" is a chapter in a book dealing with various aspects of remote sensing. AIRS and CrIS are both high spectral resolution IR sounding instruments, which were recently launched (AIRS) or will soon be launched (CrIS). The chapter explains the general principles of infra-red remote sensing, and explains the significance and information content of high spectral resolution IR measurements. The chapter shows results obtained using AIRS observations, and explains why similar quality results should be obtainable from CrIS data.

Description: The Millimeter-wave Bolometric Interferometer (MBI) is a proposed ground-based instrument designed for a wide range of cosmological and astrophysical observations including studies of the polarization of the cosmic microwave background (CMB). MBI combines the advantages of two well-developed technologies - interferometers and bolometric detectors. Interferometers have many advantages over .filled-aperture telescopes and are particularly suitable for high resolution imaging. Cooled bolometers are the highest sensitivity detectors at millimeter and sub-millimeter wavelengths. The combination of these two technologies results in an instrument with both high sensitivity and high angular resolution.

Description: We describe a new "ideal integrator" bolometer as a prototype for a new generation of sensitive, flexible far-IR detectors suitable for use in large arrays. The combination of a non-dissipative sensor coupled with a fast heat switch provides breakthrough capabilities in both sensitivity and operation. The bolometer temperature varies linearly with the integrated infrared power incident on the detector, and may be sampled intermittently without loss of information between samples. The sample speed and consequent dynamic range depend only on the heat switch reset cycle and can be selected in software. Between samples, the device acts as an ideal integrator with noise significantly lower than resistive bolometers. Since there is no loss of information between samples, the device is well-suited for large arrays. A single SQUID readout could process an entire column of detectors, greatly reducing the complexity, power requirements, and cost of readout electronics for large pixel arrays.

Description: When arrays are used to collect multiple appropriately-dithered images of the same region of sky, the resulting data set can be calibrated using a least-squares minimization procedure that determines the optimal fit between the data and a model of that data. The model parameters include the desired sky intensities as well as instrument parameters such as pixel-to-pixel gains and offsets. The least-squares solution simultaneously provides the formal error estimates for the model parameters. With a suitable observing strategy, the need for separate calibration observations is reduced or eliminated. We show examples of this calibration technique applied to HST NICMOS observations of the Hubble Deep Fields and simulated SIRTF IRAC observations.

Description: The availability of superconducting Transition Edge Sensors (TES) with large numbers of individual detector pixels requires multiplexers for efficient readout. The use of multiplexers reduces the number of wires needed between the cryogenic electronics and the room temperature electronics and cuts the number of required cryogenic amplifiers. We are using an 8 channel SQUID multiplexer to read out one-dimensional TES arrays which are used for submillimeter astronomical observations. We present results from test measurements which show that the low noise level of the SQUID multiplexers allows accurate measurements of the TES Johnson noise, and that in operation, the readout noise is dominated by the detector noise. Multiplexers for large number of channels require a large bandwidth for the multiplexed readout signal. We discuss the resulting implications for the noise performance of these multiplexers which will be used for the readout of two dimensional TES arrays in next generation instruments.

Description: Broadband surveys at the millimeter and submillimeter wavelengths will require bolometers that can reach new limits of sensitivity and also operate under high background conditions. To address this need, we present results on a dual transition edge sensor (TES) device with two operating modes: one for low background, ultrasensitive detection and one for high background, enhanced dynamic range detection. The device consists of a detector element with two transition temperatures (T(sub c)) of 0.25 and 0.51 K located on the same micromachined, thermally isolated membrane structure. It can be biased on either transition, and features phonon-limited noise performance at the lower T(sub c). We measure noise performance on the lower transition 7 x 10(exp -18) W/rt(Hz) and the bias power on the upper transition of 12.5 pW, giving a factor of 10 enhancement of the dynamic range for the device. We discuss the biasable range of this type of device and present a design concept to optimize utility of the device.

Description: We present performance results based on the first astronomical use of multiplexed superconducting bolometers. The Fabry-Perot Interferometer Bolometer Research Experiment (FIBRE) is a broadband submillimeter spectrometer that achieved first light in June 2001 at the Caltech Submillimeter Observatory (CSO). FIBRE's detectors are superconducting transition edge sensor (TES) bolometers read out by a SQUID multiplexer. The Fabry-Perot uses a low resolution grating to order sort the incoming light. A linear bolometer array consisting of 16 elements detects this dispersed light, capturing 5 orders simultaneously from one position on the sky. With tuning of the Fabry-Perot over one free spectral range, a spectrum covering Delta lambda/lambda = 1/7 at a resolution of delta lambda/lambda approx. 1/1200 can be acquired. This spectral resolution is sufficient to resolve Doppler-broadened line emission from external galaxies. FIBRE operates in the 350 m and 450 m bands. These bands cover line emission from the important star formation tracers neutral carbon (CI) and carbon monoxide (CO). We have verified that the multiplexed bolometers are photon noise limited even with the low power present in moderate resolution spectrometry.

Description: The NGST wavefront sensing and control system will be developed to TRL6 over the next few years, including testing in a cryogenic vacuum environment with traceable hardware. Doing this in the far-infrared and submillimeter is probably easier, as some aspects of the problem scale with wavelength, and the telescope is likely to have a more stable environment; however, detectors may present small complications. Since this is a new system approach, it warrants a new look. For instance, a large space telescope based on the DART membrane mirror design requires a new actuation approach. Other mirror and actuation technologies may prove useful as well.

Description: A new infrared heterodyne instrument has been developed which allows the use of both tuneable diode lasers (TDL) and quantum cascade lasers (QCL) as local oscillators (LO). The current frequency tuning range of our system extends from 900 to 1100/cm depending on the availability of lasers but is planned to be extended to 600/cm soon. The IF-bandwidth is 1.4 GHz using an acousto-optical spectrometer (AOS). The frequency resolution and stability of the system is approximately 10(exp 7). Currently, mercury-cadmium-telluride (MCT) detectors are used as mixers while new devices like quantum-well-infrared-photodetectors (QWIP) and hot-electron-bolometers (HEB) are investigated. The IF-bandwidth can be extended to about 3 GHz by using a new broadband acousto-optical spectrometer presently under development. The instrument is fully transportable and can be attached to any infrared or optical telescope. The semiconductor laser is stabilized to a Fabry-Perot ring-resonator, which is also used as an efficient diplexer to superimpose the local-oscillator and the signal radiation. As a first step measurements of trace gases in Earth's atmosphere and non-LTE emission from Venus' atmosphere were carried out as well as observations of molecular features in sunspots. Further astronomical observations from ground-based telescopes and the airborne observatory SOFIA are planned for the future. Of particular interest are molecules without a permanent dipole moment like H2, CH4, C2H2 etc.

Description: In this review paper an overview of the potential applications of high Tc (approx. 90 K) superconductors (HTS) and mid-Tc (approx. 39 K) superconductors (MTS) thin films in far IR/Sub-mm thermal detectors is presented. HTSs (YBCO, GdBCO etc.) were discovered in the late 80s while superconductivity in MgB2, an MTS, was discovered in 2001. The sharp transition in transport properties of HTS has allowed the fabrication of composite infrared thermal detectors (bolometers) with better figures of merit than thermopile detectors - thermopiles are currently on board the CIRS instrument on the Cassini mission to Saturn. The potential for developing even more sensitive sensors for IR/Sub-mm applications using MgB2 thin films is assessed. Current MgB2 thin film deposition techniques and film quality are reviewed.

Description: This paper examines the effectiveness of Pt/Cr thin film masks for the architecture of monolithic membrane structures in r-plane single crystal sapphire. The development of a pinhole-free Pt/Cr composite mask that is resistant to boiling H2SO4:H3PO4 etchant will lead to the fabrication of smooth sapphire membranes whose surfaces are well-suited for the growth of low-noise high Tc films. In particular, the relationship of thermal annealing conditions on the Pt/Cr composite mask system to: (1) changes in the surface morphology (2) elemental concentration of the Pt/Cr thin film layers and (3) etch pit formation on the sapphire surface will be presented.

Description: There are moderately-cooled (around 77K) infrared detectors, for instance InSb (around 5 microns wavelength) and HgCdTe (around 15 to 20 microns wavelength). However for longer wavelengths there are either uncooled thermal-type detectors or highly cooled (about 4K and lower) quantum and thermal detectors, with the notable exception of high Tc superconductor detectors. We will describe certain long-wavelength applications in space where only moderate cooling is feasible, and where better sensitivity is required than possible with uncooled detectors. These requirements could be met with high Tc bolometers, but it may also be prudent to develop other technologies. Additionally, over the past 16 years a marketplace has not developed for the commercial production of high Tc bolometers, indicating their production may be a natural endeavor for government laboratories.

Description: Thermal infrared imagery from several satellite instruments, such as the NOAA AVHRR and the NASA MODIS, is presently used to detect and map forest fires. But while these radiometers can identify fires they are designed and optimized for cloud detection, providing relatively low spatial resolution and quickly saturating even for small fires. Efforts to detect and monitor forest fires from space would benefit from the development of single-sensor satellites designed specifically for this purpose. With the advent of uncooled thermal detectors, and thus the absence of aggressive cooling, the possibility of developing small satellites for the purpose of fire detection and monitoring becomes practical and cost-effective. Thus is the case with the Economical Microbolometer Based Environmental Radiometer Satellite (EMBERSat) program. The objective of this program is to develop a single, prototype satellite that will provide multiband thermal imagery with a spatial resolution of 250m and a dynamic range of 300-1000K. The thermal imaging payload has flight heritage in the Infrared Spectral Imaging Radiometer that flew aboard mission STS-85 and the spacecraft is a variant of the SimpleSat bus launched from the shuttle Columbia as part of STS-105. The EMBERSat program is a technology demonstration initiative with the eventual goal of providing high-resolution thermal imagery to both the scientific community and the public.

Description: A general model is presented that assimilates the thermal and electrical properties of the bolometer - this block model demonstrates the Electro-Thermal Feedback (ETF) effect on the bolometers performance. This methodology is used to construct a SPICE model that by way of analogy combines the thermal and electrical phenomena into one simulation session. The resulting circuit diagram is presented and discussed.

Description: The Near-Infrared Spectrograph (NIRSpec) is the James Webb Space Telescope's primary near-infrared spectrograph. NASA is providing the NIRSpec detector subsystem, which consists of the focal plane array, focal plane electronics, cable harnesses, and software. The focal plane array comprises two closely-butted lambda (sub co) approximately 5 micrometer Rockwell HAWAII- 2RG sensor chip assemblies. After briefly describing the NIRSpec instrument, we summarize some of the driving requirements for the detector subsystem, discuss the baseline architecture (and alternatives), and presents some recent detector test results including a description of a newly identified noise component that we have found in some archival JWST test data. We dub this new noise component, which appears to be similar to classical two-state popcorn noise in many aspects, "popcorn mesa noise." We close with the current status of the detector subsystem development effort.

Description: We have investigated the thermal, electrical, and structural properties of Bi and BiCu films that are being developed as X-ray absorbers for transition-edge sensor (TES) microcalorimeter arrays for imaging X-ray spectroscopy. Bi could be an ideal material for an X-ray absorber due to its high X-ray stopping power and low heat capacity, but it has a low thermal conductivity, which can result in position dependence of the pulses in the absorber. In order to improve the thermal conductivity, we added Cu layers in between the Bi layers. We measured electrical and thermal conductivities of the films around 0.1 K(sub 1) the operating temperature of the TES calorimeter, to examine the films and to determine the optimal thickness of the Cu layer. From the electrical conductivity measurements, we found that the Cu is more resistive on the Bi than on a Si substrate. Together with an SEM picture of the Bi surface, we concluded that the rough surface of the Bi film makes the Cu layer resistive when the Cu layer is not thick enough t o fill in the roughness. From the thermal conductivity measurements, we determined the thermal diffusion constant to be 2 x l0(exp 3) micrometers squared per microsecond in a film that consists of 2.25 micrometers of Bi and 0.1 micrometers of Cu. We measured the position dependence in the film and found that its thermal diffusion constant is too low to get good energy resolution, because of the resistive Cu layer and/or possibly a very high heat capacity of our Bi films. We show plans to improve the thermal diffusion constant in our BiCu absorbers.

Description: Passive microwave and infrared nadir sounders such as the Advanced Microwave Sounding Unit A (AMSU-A) and the Atmospheric InfraRed Sounder (AIRS), both flying on NASA s EOS Aqua satellite, provide information about vertical temperature and humidity structure that is used in data assimilation systems for numerical weather prediction and climate applications. These instruments scan cross track so that at the satellite swath edges, the satellite zenith angles can reach approx. 60 deg. The emission path through the atmosphere as observed by the satellite is therefore slanted with respect to the satellite footprint s zenith. Although radiative transfer codes currently in use at operational centers use the appropriate satellite zenith angle to compute brightness temperature, the input atmospheric fields are those from the vertical profile above the center of the satellite footprint. If horizontal gradients are present in the atmospheric fields, the use of a vertical atmospheric profile may produce an error. This note attempts to quantify the effects of horizontal gradients on AIRS and AMSU-A channels by computing brightness temperatures with accurate slanted atmospheric profiles. We use slanted temperature, water vapor, and ozone fields from data assimilation systems. We compare the calculated slanted and vertical brightness temperatures with AIRS and AMSU-A observations. We show that the effects of horizontal gradients on these sounders are generally small and below instrument noise. However, there are cases where the effects are greater than the instrument noise and may produce erroneous increments in an assimilation system. The majority of the affected channels have weighting functions that peak in the upper troposphere (water vapor sensitive channels) and above (temperature sensitive channels) and are unlikely t o significantly impact tropospheric numerical weather prediction. However, the errors could be significant for other applications such as stratospheric analysis. Gradients in ozone and tropospheric temperature appear to be well captured by the analyses. In contrast, gradients in upper stratospheric and mesospheric temperature as well as upper tropospheric humidity are less well captured. This is likely due in part to a lack of data to specify these fields accurately in the analyses. Advanced new sounders, like AIRS, may help to better specify these fields in the future.

Description: Ozone data from the solar occultation Polar Ozone and Aerosol Measurement (POAM) III instrument are included in the ozone assimilation system at NASA's Global Modeling and Assimilation Office, which uses Solar Backscatter UItraViolet/2 (SBUV/2) instrument data. Even though POAM data are available at only one latitude in the southern hemisphere on each day, their assimilation leads to more realistic ozone distribution throughout the Antarctic region, especially inside the polar vortex. Impacts of POAM data were evaluated by comparisons of assimilated ozone profiles with independent ozone sondes. Major improvements in ozone representation are seen in the Antarctic lower stratosphere during austral Winter and spring in 1998. Limitations of assimilation of sparse occultation data are illustrated by an example.

Description: This custom bibliography from the NASA Scientific and Technical Information Program lists a sampling of records found in the NASA Aeronautics and Space Database. The scope of this topic includes technologies for lightweight, temperature-tolerant, radiation-hard sensors. This area of focus is one of the enabling technologies as defined by NASA s Report of the President s Commission on Implementation of United States Space Exploration Policy, published in June 2004.

Description: The development of Doppler Global Velocimetry from a laboratory curiosity to a wind tunnel instrumentation system is discussed. This development includes system advancements from a single velocity component to simultaneous three components, and from a steady state to instantaneous measurement. Improvements to system control and stability are discussed along with solutions to real world problems encountered in the wind tunnel. This on-going development program follows the cyclic evolution of understanding the physics of the technology, development of solutions, laboratory and wind tunnel testing, and reevaluation of the physics based on the test results.

Description: This paper presents the calibration results and uncertainty analysis of a high-precision reference pressure measurement system currently used in wind tunnels at the NASA Langley Research Center (LaRC). Sensors, calibration standards, and measurement instruments are subject to errors due to aging, drift with time, environment effects, transportation, the mathematical model, the calibration experimental design, and other factors. Errors occur at every link in the chain of measurements and data reduction from the sensor to the final computed results. At each link of the chain, bias and precision uncertainties must be separately estimated for facility use, and are combined to produce overall calibration and prediction confidence intervals for the instrument, typically at a 95% confidence level. The uncertainty analysis and calibration experimental designs used herein, based on techniques developed at LaRC, employ replicated experimental designs for efficiency, separate estimation of bias and precision uncertainties, and detection of significant parameter drift with time. Final results, including calibration confidence intervals and prediction intervals given as functions of the applied inputs, not as a fixed percentage of the full-scale value are presented. System uncertainties are propagated beginning with the initial reference pressure standard, to the calibrated instrument as a working standard in the facility. Among the several parameters that can affect the overall results are operating temperature, atmospheric pressure, humidity, and facility vibration. Effects of factors such as initial zeroing and temperature are investigated. The effects of the identified parameters on system performance and accuracy are discussed.