ALBERT

Notes: The field of lymphatic research has been recently invigorated by the identification of genes and mechanisms that control various aspects of lymphatic development. We are beginning to understand how, starting from a subgroup of embryonic venous endothelial cells, the whole lymphatic system forms in a stepwise manner. The generation of genetically engineered mice with defects in different steps of the lymphangiogenic program has provided models that are increasing our understanding of the lymphatic system in health and disease. This knowledge, in turn, should lead to the development of better diagnostic methods and treatments of lymphatic disorders and tumor metastasis.

Notes: The preparation of skeletal catalysts is considered, with particular reference to the preparation of skeletal nickel and skeletal copper. Skeletal catalysts have physical properties that are highly desired for some industrial processes, and the means of controlling these properties to optimize performance is reviewed. The preparation can be affected by the initial alloy composition, the quenching process, the leaching procedure, aging and by the addition of promoters. These processes may affect either or both the chemical and physical characteristics of the catalysts. Preparation procedures need to be adjusted for individual reactions if optimal performance is required. The effect of the preparation conditions on the structure and catalytic performance of these systems is reviewed.

Notes: We review here the theory of the early stages of oxidation of the (110) surface of Ni1x Alx, based on ab initio calculations using a plane-wave pseudopotential method. The clean surface and several oxidized surfaces have been investigated, with oxygen coverages up to 2ML of oxygen (1ML = 3 O atoms per 2 surface Al atoms). The theory to date is a description in terms of equilibrium thermodynamics, with a comparison of the free energies of several surfaces of different composition, implemented at the atomic scale. Three environmental parameters are singled out as control variables in this treatment, namely the alloy composition x (assumed to be near 0.5), the temperature T and the partial pressure of oxygen pO2. With certain reasonable approximations an analytic formula for the surface energy ?? is derived in terms of these variables and some constants that are calculated ab initio together with others that are derived from experimental thermodynamic tables. At oxygen pressures just above the threshold for bulk oxidation of NiAl, the calculations explain the observed formation of a thin film of alumina in place of NiAl surface layers, with the consequent dissolution of Ni into the bulk. Ab initio calculations illustrate how the energetics of supplying Al to the surface depends on bulk stoichiometry, which alters the relative stability of different surface oxidation states so as to favour oxidation more if the alloy is Al-rich than if it is Ni-rich.

Notes: There is a pressing need for cleaner fuels (free or aromatics and of minimal sulfur content) or ones that convert chemical energy directly to electricity, silently and without production of noxious oxides and particulates; chemical, petrochemical and pharmaceutical processes that may be conducted in a one-step, solvent-free manner and that use air as the preferred oxidant; and industrial processes that minimize consumption of energy, production of waste, or the use of corrosive, explosive, volatile, and nonbiodegradable materials. All these needs and other desiderata, such as the in situ production and containment of aggressive and hazardous reagents, and the avoidance of use of ecologically harmful elements, may be achieved by designing the appropriate heterogeneous inorganic catalyst, which ideally should be cheap, readily preparable and fully characterizable, preferably under in situ reaction conditions. A range of nanoporous and nanoparticle catalysts that meet most of the stringent demands of sustainable development and responsible (clean) technology is described. Specific examples that are highlighted include the production of adipic acid (precursor of polyamides and urethanes) without the use of concentrated nitric acid nor the production of greenhouse gases such as nitrous oxide; the production of caprolactam (precursor of nylon) without the use of oleum and hydroxylamine sulfate; and the terminal oxyfunctionalization of linear alkanes in air. The topic of biocatalysis and sustainable development is also briefly discussed for the epoxidation of terpenes and fatty acid methyl esters; for the generation of polymers, polylactides, and polyesters; and for the production of 1,3-propanediol from corn.

Notes: This review covers the synthesis, characterization, and physico-chemical properties of microporous and mesoporous aluminophosphates and silicoaluminophosphates molecular sieves. Particular emphasis is given to the materials that have found applications as acid catalysts. We consider the evolution of the synthesis procedures from the first discoveries to the current methodologies and give perspectives for new possible synthesis strategies. Emphasis is given to the use of specially prepared precursors/reactants designed for the use as molecular sieves. Experimental (especially MAS-NMR and FTIR spectroscopy) and theoretical approaches to the description of the Si insertion into the ALPO framework and to the acidic properties of SAPOs and MeAPSOs materials are discussed.

Notes: The diffusion-multiple approachĐ??the creation of composition gradients and intermetallic phases by long-term annealing of junctions of three or more phases/alloysĐ??enables the generation of a large number of phases and compositions for efficient mapping of phase diagrams, phase properties, and kinetics. With an efficiency much higher than that of a conventional approach, many critical materials data, which otherwise would be too time-consuming and expensive to acquire, can be obtained and employed to accelerate alloy design. The critical data for structural materials design include phase diagrams, diffusion coefficients, precipitation kinetics, solution-strengthening effects, and precipitation-strengthening effects. All these data can be obtained from diffusion multiples. The combination of the diffusion-multiple approach with the CALPHAD approach can impact computational design of structural materials. The diffusion-multiple approach can also be applied to combinatorial screening of functional materials having unique physical, chemical, or other properties when micro-scale measurement techniques are available for these properties. Examples are shown to illustrate the progress made to date on applying the diffusion-multiple approach to accelerated design/discovery of materials.

Notes: Renewable energy resources, of which wind energy is prominent, are part of the solution to the global energy problem. Wind turbine and the rotorblade concepts are reviewed, and loadings by wind and gravity as important factors for the fatigue performance of the materials are considered. Wood and composites are discussed as candidates for rotorblades. The fibers and matrices for composites are described, and their high stiffness, low density, and good fatigue performance are emphasized. Manufacturing technologies for composites are presented and evaluated with respect to advantages, problems, and industrial potential. The important technologies of today are prepreg (pre-impregnated) technology and resin infusion technology. The mechanical properties of fiber composite materials are discussed, with a focus on fatigue performance. Damage and materials degradation during fatigue are described. Testing procedures for documentation of properties are reviewed, and fatigue loading histories are discussed, together with methods for data handling and statistical analysis of (large) amounts of test data. Future challenges for materials in the field of wind turbines are presented, with a focus on thermoplastic composites, new structural materials concepts, new structural design aspects, structural health monitoring, and the coming trends and markets for wind energy.

Notes: This review illustrates how catalytically active molecular structures are created on oxide surfaces by attachment of metal complexes with subsequent structural transformation and molecular imprinting on the surfaces. Also discussed is how the designed surfaces are characterized in situ by physical techniques including conventional and time-resolved X-ray absorption fine structure. The structural transformation and molecular imprinting for attached metal complexes can provide a new class of catalytic materials with a high complexity for selective catalysis including shape-selective and asymmetric catalysis.

Notes: This paper describes the use of extended X-ray absorption fine structure spectroscopy (EXAFS) to examine the structure of molten salts and ionic liquids and species dissolved in them. The EXAFS theory is briefly described as are the methods by which EXAFS of these systems can be studied. A range of applications have used EXAFS to investigate the structure of metallic species in ionic liquids from extraction studies to catalysts. The area of structural investigations of ionic liquids is still being developed, although growing rapidly, whereas the structure of molten salts has been studied using EXAFS in more detail.

Notes: In the nanoscience era, the properties of many exciting new materials and devices will depend on the details of their composition down to the level of single atoms. Thus the characterization of the structure and electronic properties of matter at the atomic scale is becoming ever more vital for economic and technological as well as for scientific reasons. The combination of atomic-resolution Z-contrast scanning transmission electron microscopy (STEM) and electron energy loss spectroscopy (EELS) represents a powerful method to link the atomic and electronic structure to macroscopic properties, allowing materials, nanoscale systems, and interfaces to be probed in unprecedented detail. Z-contrast STEM uses electrons that have been scattered to large angles for imaging. The relative intensity of each atomic column is roughly proportional to Z2, where Z is the atomic number. Recent developments in correcting the aberrations of the lenses in the electron microscope have pushed the achievable spatial resolution and the sensitivity for imaging and spectroscopy in the STEM into the sub-A??ngstrom (sub-A??) regime, providing a new level of insight into the structure/property relations of complex materials. Images acquired with an aberration-corrected instrument show greatly improved contrast. The signal-to-noise ratio is sufficiently high to allow sensitivity even to single atoms in both imaging and spectroscopy. This is a key achievement because the detection and measurement of the response of individual atoms has become a challenging issue to provide new insight into many fields, such as catalysis, ceramic materials, complex oxide interfaces, or grain boundaries. In this article, the state-of-the-art for the characterization of all of these different types of materials by means of aberration-corrected STEM and EELS are reviewed.

Notes: The objective of this review is to critically assess the different approaches developed in recent years to understand the dynamics of open flows such as mixing layers, jets, wakes, separation bubbles, boundary layers, and so on. These complex flows develop in extended domains in which fluid particles are continuously advected downstream. They behave either as noise amplifiers or as oscillators, both of which exhibit strong nonlinearities ( Huerre & Monkewitz 1990 ). The local approach is inherently weakly nonparallel and it assumes that the basic flow varies on a long length scale compared to the wavelength of the instability waves. The dynamics of the flow is then considered as a superposition of linear or nonlinear instability waves that, at leading order, behave at each streamwise station as if the flow were homogeneous in the streamwise direction. In the fully global context, the basic flow and the instabilities do not have to be characterized by widely separated length scales, and the dynamics is then viewed as the result of the interactions between Global modes living in the entire physical domain with the streamwise direction as an eigendirection. This second approach is more and more resorted to as a result of increased computational capability. The earlier review of Huerre & Monkewitz (1990) emphasized how local linear theory can account for the noise amplifier behavior as well as for the onset of a Global mode. The present survey first adopts the opposite point of view by demonstrating how fully global theory accounts for the noise amplifier behavior of open flows. From such a perspective, there is strong emphasis on the very peculiar nonorthogonality of linear Global modes, which in turn allows a novel interpretation of recent numerical simulations and experimental observations. The nonorthogonality of linear Global modes also imposes severe constraints on the extension of linear global theory to the fully nonlinear re??gime. When the flow is weakly nonparallel, this limitation is so severe that the linear Global mode theory is of little help. It is then much more appropriate to develop a fully nonlinear formulation involving the presence of a front separating the base state region from the bifurcated state region.

Notes: We review the fluid mechanics and rheology of dense suspensions, emphasizing investigations of microstructure and total stress. "Dense" or "highly concentrated" suspensions are those in which the average particle separation distance is less than the particle radius. For these suspensions, multiple-body interactions as well as two-body lubrication play a significant role and the rheology is non-Newtonian. We include investigations of multimodal suspensions, but not those of suspensions with dominant nonhydrodynamic interactions. We consider results from both physical experiments and computer simulations and explore scaling theories and the development of constitutive equations.

Notes: George Gabriel Stokes died just over 100 years ago, and it has been more than 150 years since he published his great 1847 paper on water waves. The work of Stokes' precursors, which informed his early publications of 1842Đ??50, is described in the previous volume of the Annual Review of Fluid Mechanics ( Craik 2004 ). Here I examine Stokes' papers and letters concerning water waves.

Notes: Chaotic advection and, more generally, ideas from dynamical systems, have been fruitfully applied to a diverse, and varied, collection of mixing and transport problems arising in engineering applications over the past 20 years. Indeed, the "dynamical systems approach" was developed, and tested, to the point where it can now be considered a standard tool for understanding mixing and transport issues in many disciplines. This success for engineering-type flows motivated an effort to apply this approach to transport and mixing problems in geophysical flows. However, there are fundamental difficulties arising in this endeavor that must be properly understood and overcome. Central to this approach is that the starting point for analysis is a velocity field (i.e., the "dynamical system"). In many engineering applications this can be obtained sufficiently accurately, either analytically or computationally, so that it describes particle trajectories for the actual flow. However, in geophysical flows (and we concentrate here almost exclusively on oceanographic flows), the wide range of dynamically significant time and length scales makes the justification of any velocity field, in the sense of reproducing particle trajectories for the actual flow, a much more difficult matter. Nevertheless, the case for this approach is compelling due to the advances in observational capabilities in oceanography (e.g., drifter deployments, remote sensing capabilities, satellite imagery, etc.), which reveal space-time structures that are highly suggestive of the structures one visualizes in the global, geometrical study of dynamical systems theory. This has been pursued in recent years through a combination of laboratory studies, kinematic models, and dynamically consistent models that have all been compared with observational data. During the course of these studies it has become apparent that a new type of dynamical system is necessary to consider in these studies (i.e., a finite time, aperiodically time-dependent velocity field defined as a data set), which requires the development of new analytical and computational tools, as well as the necessity to discard some of the standard ideas and results from dynamical systems theory. In this article we review a number of the key developments to date in this young, but rapidly developing, area at the interface between geophysical fluid dynamics and applied and computational mathematics. We also describe the wealth of new directions for research that this approach unlocks.

Notes: The gas-lift technique comprises the injection of gas bubbles in vertical oil wells to increase production. It is based on a reduction of the tubing gravitational pressure gradient. Several fluid-flow phenomena influencing such vertical gas-liquid flows are discussed. These effects include the radial distribution of void fraction and of gas and liquid velocity, flow regime changes, and system stability problems. Associated consequences for gas-lift performance and related optimization approaches are also discussed.

Notes: What mechanisms of flow control do animals use to enhance hydrodynamic performance? Animals are capable of manipulating flow around the body and appendages both passively and actively. Passive mechanisms rely on structural and morphological components of the body (i.e., humpback whale tubercles, riblets). Active flow control mechanisms use appendage or body musculature to directly generate wake flow structures or stiffen fins against external hydrodynamic loads. Fish can actively control fin curvature, displacement, and area. The vortex wake shed by the tail differs between eel-like fishes and fishes with a discrete narrowing of the body in front of the tail, and three-dimensional effects may play a major role in determining wake structure in most fishes.

Notes: Over the past four decades, the combination of in situ and remote sensing observations has demonstrated that long nonlinear internal solitary-like waves are ubiquitous features of coastal oceans. The following provides an overview of the properties of steady internal solitary waves and the transient processes of wave generation and evolution, primarily from the point of view of weakly nonlinear theory, of which the Korteweg-de Vries equation is the most frequently used example. However, the oceanographically important processes of wave instability and breaking, generally inaccessible with these models, are also discussed. Furthermore, observations often show strongly nonlinear waves whose properties can only be explained with fully nonlinear models.

Notes: Electrophoretic separation of a mixture of chemical species is a fundamental technique of great usefulness in biology, health care, and forensics. In capillary electrophoresis (which has evolved from its predecessor, slab-gel electrophoresis), the sample migrates through a single microcapillary instead of through the network of pores in a gel. A fundamental design problem is to minimize dispersion in the separation direction. Molecular diffusion is inevitable and sets a theoretical limit on the best separation that can be achieved. But in practice, there are a number of effects arising out of the interplay between fluid flow, chemistry, thermal effects, and electric fields that result in enhanced dispersion. This paper reviews the subject of fluid flow in such capillary microchannels and examines the various causes of enhanced dispersion that limit the efficiency of separation.

Notes: Race car performance depends on elements such as the engine, tires, suspension, road, aerodynamics, and of course the driver. In recent years, however, vehicle aerodynamics gained increased attention, mainly due to the utilization of the negative lift (downforce) principle, yielding several important performance improvements. This review briefly explains the significance of the aerodynamic downforce and how it improves race car performance. After this short introduction various methods to generate downforce such as inverted wings, diffusers, and vortex generators are discussed. Due to the complex geometry of these vehicles, the aerodynamic interaction between the various body components is significant, resulting in vortex flows and lifting surface shapes unlike traditional airplane wings. Typical design tools such as wind tunnel testing, computational fluid dynamics, and track testing, and their relevance to race car development, are discussed as well. In spite of the tremendous progress of these design tools (due to better instrumentation, communication, and computational power), the fluid dynamic phenomenon is still highly nonlinear, and predicting the effect of a particular modification is not always trouble free. Several examples covering a wide range of vehicle shapes (e.g., from stock cars to open-wheel race cars) are presented to demonstrate this nonlinear nature of the flow field.

Notes: Large-eddy simulation (LES) of turbulent combustion is a relatively new research field. Much research has been carried out over the past years, but to realize the full predictive potential of combustion LES, many fundamental questions still have to be addressed, and common practices of LES of nonreacting flows revisited. The focus of the present review is to highlight the fundamental differences between Reynolds-averaged Navier-Stokes (RANS) and LES combustion models for nonpremixed and premixed turbulent combustion, to identify some of the open questions and modeling issues for LES, and to provide future perspectives.

Notes: In this review I describe the several stages of my research career, all of which were driven by a desire to understand the basic mechanisms responsible for the complex and beautiful organization of the eukaryotic cell. I was originally trained as an electron microscopist in Argentina, and my first major contribution was the introduction of glutaraldehyde as a fixative that preserved the fine structure of cells, which opened the way for cytochemical studies at the EM level. My subsequent work on membrane-bound ribosomes illuminated the process of cotranslational translocation of polypeptides across the ER membrane and led to the formulation, with Gunter Blobel, of the signal hypothesis. My later studies with many talented colleagues contributed to an understanding of ER structure and function and aspects of the mechanisms that generate and maintain the polarity of epithelial cells. For this work my laboratory introduced the now widely adopted Madin-Darby canine kidney (MDCK) cell line, and demonstrated the polarized budding of envelope viruses from those cells, providing a powerful new system that further advanced the field of protein traffic.

Notes: Chromatin can be differentiated by the deposition of variant histones at centromeres, active genes, and silent loci. Variant histones are assembled into nucleosomes in a replication-independent manner, in contrast to assembly of bulk chromatin that is coupled to replication. Recent in vitro studies have provided the first glimpses of protein machines dedicated to building and replacing alternative nucleosomes. They deposit variant H2A and H3 histones and are targeted to particular functional sites in the genome. Differences between variant and canonical histones can have profound consequences, either for delivery of the histones to sites of assembly or for their function after incorporation into chromatin. Recent studies have also revealed connections between assembly of variant nucleosomes, chromatin remodeling, and histone post-translational modification. Taken together, these findings indicate that chromosome architecture can be highly dynamic at the most fundamental level, with epigenetic consequences.

Notes: Plants shape their organs with a precision demanded by optimal function; organ shaping requires control over cell wall expansion anisotropy. Focusing on multicellular organs, I survey the occurrence of expansion anisotropy and discuss its causes and proposed controls. Expansion anisotropy of a unit area of cell wall is characterized by the direction and degree of anisotropy. The direction of maximal expansion rate is usually regulated by the direction of net alignment among cellulose microfibrils, which overcomes the prevailing stress anisotropy. In some stems, the directionality of expansion of epidermal cells is controlled by that of the inner tissue. The degree of anisotropy can vary widely as a function of position and of treatment. The degree of anisotropy is probably controlled by factors in addition to the direction of microfibril alignment. I hypothesize that rates of expansion in maximal and minimal directions are regulated by distinct molecular mechanisms that regulate interactions between matrix and microfibrils.

Notes: Over the past decades, intravital microscopy (IVM), the imaging of cells in living organisms, has become a valuable tool for studying the molecular determinants of lymphocyte trafficking. Recent advances in microscopy now make it possible to image cell migration and cell-cell interactions in vivo deep within intact tissues. Here, we summarize the principal techniques that are currently used in IVM, discuss options and tools for fluorescence-based visualization of lymphocytes in microvessels and tissues, and describe IVM models used to explore lymphoid and non-lymphoid organs. The latter will be introduced according to the physiologic itinerary of developing and differentiating T and B lymphocytes as they traffic through the body, beginning with their development in bone marrow and thymus and continuing with their migration to secondary lymphoid organs and peripheral tissues.

Notes: Centrosomes, spindle pole bodies, and related structures in other organisms are a morphologically diverse group of organelles that share a common ability to nucleate and organize microtubules and are thus referred to as microtubule organizing centers or MTOCs. Features associated with MTOCs include organization of mitotic spindles, formation of primary cilia, progression through cytokinesis, and self-duplication once per cell cycle. Centrosomes bind more than 100 regulatory proteins, whose identities suggest roles in a multitude of cellular functions. In fact, recent work has shown that MTOCs are required for several regulatory functions including cell cycle transitions, cellular responses to stress, and organization of signal transduction pathways. These new liaisons between MTOCs and cellular regulation are the focus of this review. Elucidation of these and other previously unappreciated centrosome functions promises to yield exciting scientific discovery for some time to come.

Notes: The combined use of the new technologies of multiphoton-based intravital imaging, the chemotaxis-mediated collection of invasive cells, and high sensitivity expression profiling has allowed the correlation of the behavior of invasive tumor cells in vivo with their gene expression patterns. New insights have resulted including a gene expression signature for invasive cells and the tumor microenvironment invasion model. This model proposes that tumor invasion and metastasis can be studied as a problem resembling normal morphogenesis. We discuss how these new insights may lead to a better understanding of the molecular basis of the invasive behavior of tumor cells in vivo, which may result in new strategies for the diagnosis and treatment of metastasis.

Notes: Secretory and transmembrane proteins enter the secretory pathway through the protein-conducting Sec61 channel in the membrane of the endoplasmic reticulum. In the endoplasmic reticulum, proteins fold, are frequently covalently modified, and oligomerize before they are packaged into transport vesicles that shuttle them to the Golgi complex. Proteins that misfold in the endoplasmic reticulum are selectively transported back across the endoplasmic reticulum membrane to the cytosol for degradation by proteasomes. Depending on the topology of the defect in the protein, cytosolic or lumenal chaperones are involved in its targeting to degradation. The export channel for misfolded proteins is likely also formed by Sec61p. Export may be powered by AAA-ATPases of the proteasome 19S regulatory particle or Cdc48p/p97. Exported proteins are frequently ubiquitylated prior to degradation and are escorted to the proteasome by polyubiquitin-binding proteins.

Notes: Phagocytosis, the process by which cells engulf large particles, requires a substantial contribution of membranes. Recent studies have revealed that intracellular compartments, including endocytic organelles and the endoplasmic reticulum (ER), can engage in fusion events with the plasma membrane at the sites of nascent phagosomes. The finding that ER proteins are delivered to phagosomes, where degraded peptides are loaded onto major histocompatibility complex (MHC) class II molecules, has significantly enhanced our understanding of the immune functions associated with these organelles. Although it is well known that pathogens are killed in phagosomes, the contribution of ER proteins to phagosomes has provided a novel pathway for the loading of exogenous peptides onto MHC class I molecules, a process known as cross-presentation. Thus, phagocytosis has evolved from a nutritional function in unicellular organisms to play key roles in both innate and adaptive immunity in vertebrates.

Notes: The sensory and motor components of nervous systems are connected topographically and contain neural maps of the external world. The paradigm for such maps is the precisely ordered wiring of the output cells of the eye to their synaptic targets in the tectum of the midbrain. The retinotectal map is organized in development through the graded activity of Eph receptor tyrosine kinases and their ephrin ligands. These signaling proteins are arrayed in complementary expression gradients along the orthogonal axes of the retina and tectum, and provide both input and recipient cells with Cartesian coordinates that specify their location. Molecular genetic studies in the mouse indicate that these coordinates are interpreted in the context of neuronal competition for termination sites in the tectum. They further suggest that order in the retinotectal map is determined by ratiometric rather than absolute difference comparisons in Eph signaling along the temporal-nasal and dorsal-ventral axes of the eye.

Notes: The cytoskeleton plays important roles in plant cell shape determination by influencing the patterns in which cell wall materials are deposited. Cortical microtubules are thought to orient the direction of cell expansion primarily via their influence on the deposition of cellulose into the wall, although the precise nature of the microtubule-cellulose relationship remains unclear. In both tip-growing and diffusely growing cell types, F-actin promotes growth and also contributes to the spatial regulation of growth. F-actin has been proposed to play a variety of roles in the regulation of secretion in expanding cells, but its functions in cell growth control are not well understood. Recent work highlighted in this review on the morphogenesis of selected cell types has yielded substantial new insights into mechanisms governing the dynamics and organization of cytoskeletal filaments in expanding plant cells and how microtubules and F-actin interact to direct patterns of cell growth. Nevertheless, many important questions remain to be answered.

Notes: The establishment of the Angiosperm root apical meristem is dependent on the specification of a stem cell niche and the subsequent development of the quiescent center at the presumptive root pole. Distribution of auxin and the establishment of auxin maxima are early formative steps in niche specification that depend on the expression and distribution of auxin carriers. Auxin specifies stem cell niche formation by directly and indirectly affecting gene activities. Part of the indirect regulation by auxin may involve changes in redox, favoring local, oxidized microenvironments. Formation of a QC is required for root meristem development and elaboration. Many signals likely pass between the QC and the adjacent root meristem tissues. Disappearance of the QC is associated with roots becoming determinate. Given the many auxin feedback loops, we hypothesize that roots evolved as part of an auxin homeostasis mechanism.

Notes: Polarization is a feature common to many cell types. Epithelial cells, for example, exhibit a characteristic apical-basolateral polarity that is critical for their function. In addition to this ubiquitous form of polarity, whole fields of cells are often polarized in a plane perpendicular to the apical-basal axis. This form of polarity, referred to as planar cell polarity (PCP), exists in all adult Drosophila cuticular tissues, as well as in numerous vertebrate tissues, including the mammalian skin and inner ear epithelia. Recent advances in the study of PCP establishment are beginning to unravel the molecular mechanisms underlying this cellular process. This review discusses new developments in the molecular understanding of PCP in Drosophila and vertebrates and integrates the current data in a model to illustrate how interactions between PCP factors might function to generate planar polarity.