ALBERT

Description: Microbial mats collected at cold methane seeps in the Black Sea carry out anaerobic oxidation of methane (AOM) to carbon dioxide using sulfate as the electron acceptor. These mats, which predominantly consist of sulfate-reducing bacteria and archaea of the ANME-1 and ANME-2 type, contain large amounts of proteins very similar to methyl-coenzyme M reductase from methanogenic archaea. Mass spectrometry of mat samples revealed the presence of two nickel-containing cofactors in comparable amounts, one with the same mass as coenzyme F430 from methanogens (m/z = 905) and one with a mass that is 46 Da higher (m/z = 951). The two cofactors were isolated and purified, and their constitution and absolute configuration were determined. The cofactor with m/z = 905 was proven to be identical to coenzyme F430 from methanogens. For the m/z = 951 species, high resolution ICP-MS pointed to F430 + CH2S as the molecular formula, and LA-ICP-SF MS finally confirmed the presence of one sulfur atom per nickel. Esterification gave two stereoisomeric pentamethyl esters with m/z = 1021, which could be purified by reverse phase HPLC and were subjected to comprehensive NMR analysis, allowing determination of their constitution and configuration as (172S)−172-methylthio-F430 pentamethyl ester and (172R)−172-methylthio-F430 pentamethyl ester. The corresponding diastereoisomeric pentaacids could also be separated by HPLC and were correlated to the esters via mild hydrolysis of the latter. Equilibration of the pentaacids under acid catalysis showed that the (172S) isomer is the naturally occurring albeit thermodynamically less stable one. The more stable (172R) isomer (80% at equilibrium) is an isolation artifact generated under the acidic conditions necessary for the isolation of the cofactors from the calcium carbonate-encrusted mats.

Description: Test specimens of methane hydrate were grown under static conditions by combining cold, pressurized CH4 gas with H2O ice grains, then warming the system to promote the reaction CH4 (g) + 6H2O (s???l) ??? CH4??6H2O. Hydrate formation evidently occurs at the nascent ice/liquid water interface, and complete reaction was achieved by warming the system above 271.5 K and up to 289 K, at 25-30 MPa, for approximately 8 hours. The resulting material is pure methane hydrate with controlled grain size and random texture. Fabrication conditions placed the H2O ice well above its melting temperature before reaction completed, yet samples and run records showed no evidence for bulk melting of the ice grains. Control experiments using Ne, a non-hydrate-forming gas, verified that under otherwise identical conditions, the pressure reduction and latent heat associated with ice melting is easily detectable in our fabrication apparatus. These results suggest that under hydrate-forming conditions, H2O ice can persist metastably at temperatures well above its melting point. Methane hydrate samples were then tested in constant-strain-rate deformation experiments at T= 140-200 K, Pc= 50-100 MPa, and ????= 10-4-10-6 s-1. Measurements in both the brittle and ductile fields showed that methane hydrate has measurably different strength than H2O ice, and work hardens to a higher degree compared to other ices as well as to most metals and ceramics at high homologous temperatures. This work hardening may be related to a changing stoichiometry under pressure during plastic deformation; x-ray analyses showed that methane hydrate undergoes a process of solid-state disproportionation or exsolution during deformation at conditions well within its conventional stability field.

Description: We describe a new and efficient technique to grow aggregates of pure methane hydrate in quantities suitable for physical and material properties testing. Test specimens were grown under static conditions by combining cold, pressurized CH4 gas with granulated H2O ice, and then warming the reactants to promote the reaction CH4(g) + 6H2O(s→l) → CH4·6H2O (methane hydrate). Hydrate formation evidently occurs at the nascent ice/liquid water interface on ice grain surfaces, and complete reaction was achieved by warming the system above the ice melting point and up to 290 K, at 25−30 MPa, for approximately 8 h. The resulting material is pure, cohesive, polycrystalline methane hydrate with controlled grain size and random orientation. Synthesis conditions placed the H2O ice well above its melting temperature while reaction progressed, yet samples and run records showed no evidence for bulk melting of the unreacted portions of ice grains. Control experiments using Ne, a non-hydrate-forming gas, showed that under otherwise identical conditions, the pressure reduction and latent heat associated with ice melting are easily detectable in our fabrication apparatus. These results suggest that under hydrate-forming conditions, H2O ice can persist metastably to temperatures well above its ordinary melting point while reacting to form hydrate. Direct observations of the hydrate growth process in a small, high-pressure optical cell verified these conclusions and revealed additional details of the hydrate growth process. Methane hydrate samples were then tested in constant-strain-rate deformation experiments at T = 140−200 K, Pc = 50−100 MPa, and ε = 10-4−10-6 s-1. Measurements in both the brittle and ductile fields showed that methane hydrate has measurably different strength than H2O ice, and work hardens to an unusually high degree compared to other ices as well as to most metals and ceramics at high homologous temperatures. This work hardening may be related to a changing stoichiometry under pressure during plastic deformation; X-ray analyses showed that methane hydrate undergoes a process of solid-state disproportionation or exsolution during deformation at conditions well within its conventional stability field.

Description: Two new cyclic peroxides, 2 and 3, were isolated from a sample of the Norwegian sponge Plakortis simplex. Their structures including relative stereochemistry were elucidated by interpretation of MS and NMR data. Compound 3 exhibited moderate in vitro activity against six solid human tumor cell lines with IC50 values in the range 7−15 μg/mL.

Description: Bringer of storms and droughts, the El Niño∕Southern Oscillation results from the complex, sometimes chaotic interplay of ocean and atmosphere.

Description: Metabolomics offers great potential for understanding the metabolic consequences of exposure to chemicals and other stressors in the environment. Biological systems encompass humans exposed to chemicals in the environment as well as the diverse organisms inhabiting an ecosystem and exposed to environmental contaminants. An overall goal of environmental metabolomics is to understand what is metabolomically “normal” or adaptive and what constitutes a threat to human health and the environment.

Description: An overview is provided of time-independent physical/chemical properties as related to crystal structures. The following two points are illustrated in this review:  (1) Physical and chemical properties of structure I (sI) and structure II (sII) hydrates are well-defined; measurements have begun on sH. Properties of sI and sII are determined by the molecular structures, described by three heuristics:  (i) Mechanical properties approximate those of ice, perhaps because hydrates are 85 mol % water. Yet each volume of hydrate may contain as much as 180 volumes (STP) of the hydrate-forming species. (ii) Phase equilibrium is set by the size ratio of guest molecules within host cages, and three-phase (Lw−H−V) equilibrium pressure depends exponentially upon temperature. (iii) Heats of formation are set by the hydrogen-bonded crystals and are reasonably constant within a range of guest sizes. (2) Fundamental research challenges are (a) to routinely measure the hydrate phase (via diffraction, NMR, Raman, etc.), and (b) to formulate an acceptable model for hydrate formation kinetics. The reader may wish to investigate details of this review further, via references contained in several recent monographs.

Description: Anthecularin (1), a minor sesquiterpene lactone with a novel ring system was isolated from Greek Anthemis auriculata (Asteraceae). Its structure was elucidated by means of NMR, HRMS, and X-ray crystallography. Anthecularin showed antitrypanosomal (IC50 = 10.1 μg/mL) and antiplasmodial activity (IC50 = 23.3 μg/mL) and inhibited two key enzymes of the plasmodial type II fatty acid biosynthesis pathway, PfFabI and PfFabG (IC50 values = 14 and 28.3 μg/mL, respectively). A probable biogenesis of 1 is also proposed and discussed.

Description: The water-soluble part of the methanolic extract from the aerial parts of Scrophularia crypthophila, through chromatographic methods, yielded three new resin glycosides, crypthophilic acids A−C (1−3). Compounds 1−3 are tetraglycosides of (+)-3S,12S-dihydroxypalmitic acid. The structures of these and 10 known compounds were elucidated by spectroscopic and chemical means. All natural resin glycosides known so far have been obtained from Convolvulaceae plants; this is the first report of such glycosides from another, taxonomically unrelated family (Scrophulariaceae).

Description: Two new iridoid glucosides, 6-O-acetylajugol (1) and 7,8-epoxy-8-epi-loganic acid (2), together with five known iridoid glucosides, galiridoside (3), ajugoside (4), 10-deoxygeniposidic acid (5), 7-deoxy-8-epi-loganic acid (6), and 8-O-acetylharpagide (7), have been isolated from the aerial parts of Leonurus persicus. Leucosceptoside A (8), eugenyl β-rutinoside (9), and kaempferol 3-O-glucoside (10) were also isolated. The structures of 1 and 2 were elucidated by extensive 1D- and 2D-NMR spectroscopy and molecular modeling. The structure of 3 was confirmed by single-crystal X-ray diffraction. Antimicrobial activity of compounds (1−10) was also evaluated against a panel of Gram-positive and Gram-negative bacteria and two strains of fungi.

Description: Six new labdane diterpenoids, leopersin C (1), 15-epi-leopersin C (2), leopersin D (3), leopersin E (4), leopersin F (5), and 7-epi-leopersin F (6) were isolated from the aerial parts of Leonurus persicus. Their structures were elucidated by extensive use of 1D and 2D homonuclear and heteronuclear shift-correlated 1H−13C-NMR spectroscopic methods. Leopersin C (1) and 15-epi-leopersin C (2) were obtained as a C-15 epimeric mixture, and their structures were elucidated on this basis.

Description: Seven new labdane diterpenoids, leopersin G−L (1−4, 6−7) and 15-epi-leopersin J (5), and two known ones, 13-hydroxyballonigrinolide (8) and ballotenol (9), were isolated from the aerial parts of Leonurus persicus along with β-sitosterol and stigmasterol. The structure determinations were mainly based on 1D and 2D NMR spectra. The stereochemical configuration of ballotenol (9) was reestablished by 2D ROESY spectroscopy and by single-crystal X-ray diffraction analysis.

Description: The effects of dissolved organic compounds on the determination of nanomolar concentrations of Fe(II) have been compared using two luminol-based flow injection chemiluminescence (FI-CL) methods. One used the direct injection of sample into the luminol reagent stream, and the other incorporated on-line solid-phase extraction of the analyte on an 8-hydroxyquinoline microcolumn. The CL signals from analyses of dissolved iron species (Fe(II) and Fe(III)) with model ligands and organic compounds were examined in high-purity water and seawater. The organic compounds included natural reducing agents (e.g., ascorbic acid), nitrogen σ-donor/π-acceptor compounds (e.g., 1,4-dipyridine, protoporphyrin IX), aromatic compounds (e.g., 1,4-dihydroxybenzene), synthetic iron chelators (e.g., EDTA), and natural iron binding compounds (e.g., desferrioxamine B, ferrichrome A). Fe(II) determinations for both luminol FI-CL methods were affected by submicromolar concentrations of redox-active compounds, strong iron binding ligands (i.e., log KFeL > 6), and compounds with electron-donating functional groups in both high-purity water and seawater. This was due to reactions between organic molecules and iron species before and during analysis, rather than chemiluminescence caused by the individual organic compounds. In addition, the effects of strong ligands and size speciation on Fe(II) recoveries from seawater following acidification (pH 2) and reduction (100 μM sodium sulfite) were investigated. © 2005 American Chemical Society.

Description: An automated method for on-site monitoring of uranium(VI) in raffinate streams originating from nuclear fuel reprocessing plants is described. An in-line stripping procedure (based on liquid/liquid extraction) was developed to extract U(VI) from this stream, a solvent mixture of 20% tributyl phosphate and nitric acid in kerosene, into an aqueous sodium sulfate solution, Degradation products in the solvent mixture, especially dibutyl phosphate, give rise to very strong complexes and are responsible for moderate but constant U(VI) recoveries (similar to 50%), Optimal conditions for in-line stripping comprise a mixing ratio of extractant (0.5 M sodium sulfate in water)/solvent mixture of similar to 3 and a pumping rate of similar to 0.4 mL min(-1) of the solvent mixture. The determination of U(VI) was by on-line cathodic stripping voltammmetry (CSV), preceded by adsorptive collection of the U(VL) as an oxine complex onto a hanging mercury drop electrode, Quantities of 1-2 mL of the aqueous extract were pumped into the voltammmetric cell and diluted (1/5 to 1/10) with a background electrolyte containing 0.1 M PIPES buffer, 2 x 10(-4) M oxine, 10(-4) M EDTA, and 0.2 M hydrazine hydrate (pH 9.0), The CSV peak for U(VI) was obtained at -0.68 V with a detection limit of 20 nM in the raffinate stream using an adsorption time of 120 s, Both the inline stripping procedure and the on-line measurement were fully automated, with a relative standard deviation in the measurements of 〈 5%.

Description: A critical examination of published data obtained primarily from recent nuclear magnetic resonance spectroscopy, X-ray absorption near-edge structure spectroscopy, electrospray ionization-mass spectrometry, and pyrolysis studies reveals an evolving new view of the molecular structure of soil humic substances. According to the new view, humic substances are collections of diverse, relatively low molecular mass components forming dynamic associations stabilized by hydrophobic interactions and hydrogen bonds. These associations are capable of organizing into micellar structures in suitable aqueous environments. Humic components display contrasting molecular motional behavior and may be spatially segregated on a scale of nanometers. Within this new structural context, these components comprise any molecules intimately associated with a humic substance, such that they cannot be separated effectively by chemical or physical methods. Thus biomolecules strongly bound within humic fractions are by definition humic components, a conclusion that necessarily calls into question key biogeochemical pathways traditionally thought to be required for the formation of humic substances. Further research is needed to elucidate the intermolecular interactions that link humic components into supramolecular associations and to establish the pathways by which these associations emerge from the degradation of organic litter.

Description: Significant changes have occurred in the anthropogenic emissions of many compounds related to the Kyoto and Montreal Protocols within the past 20 years and many of their atmospheric abundances have responded dramatically. Additionally, there are a number of related natural compounds with underdetermined source or sink budgets. A new instrument, Medusa, was developed to make the high frequency in situ measurements required for the determination of the atmospheric lifetimes and emissions of these compounds. This automated system measures a wide range of halocarbons, hydrocarbons, and sulfur compounds involved in ozone depletion and/or climate forcing, from the very volatile perfluorocarbons (PFCs, e.g., CF4 and CF3CF3) and hydrofluorocarbons (HFCs, e.g., CH3CF3) to the higher-boiling point solvents (such as CH3CCl3 and CCl2CCl2) and CHBr3. A network of Medusa systems worldwide provides 12 in situ ambient air measurements per day of more than 38 compounds of part per trillion mole fractions and precisions up to 0.1% RSD at the five remote field stations operated by the Advanced Global Atmospheric Gases Experiment (AGAGE). This custom system couples gas chromatography/mass spectrometry (GC/MSD) with a novel scheme for cryogen-free low-temperature preconcentration (−165 °C) of analytes from 2 L samples in a two-trap process using HayeSep D adsorbent.