ALBERT

Description: In the context of Internet of Things (IoT), multiple cooperative nodes in wireless sensor networks (WSNs) can be used to monitor an event, jointly generate a report and then send it to one or more Internet nodes for further processing. A primary security requirement in such applications is that every event data report be authenticated to intended Internet users and effectively filtered on its way to the Internet users to realize the security of data collection and transmission from the WSN. However, most present schemes developed for WSNs don’t consider the Internet scenario while traditional mechanisms developed for the Internet are not suitable due to the resource constraint of sensor nodes. In this paper, we propose a scheme, which we refer to as Data Authentication and En-route Filtering (DAEF), for WSNs in the context of IoT. In DAEF, signature shares are generated and distributed based on verifiable secret sharing cryptography and an efficient ID-based signature algorithm. Our security analysis shows that DAEF can defend against node compromise attacks as well as denial of service (DoS) attacks in the form of report disruption and selective forwarding. We also analyze energy consumption to show the advantages of DAEF over some comparable schemes.

Description: This paper presents a dynamic adaptive machine-to-machine (M2M) service rate allocation scheme for optimum traffic distribution in heterogeneous wireless environments (HWEs). According to the M2M service characteristics, it proposes the utility function, which forms a convex optimization problem that maximizes the utility of M2M service and can be solved by the Lagrange multiplier. The simulation results show the proposed method convergence, and it can achieve load balance with maximized throughput and minimized cost.

Description: In many surveillance application scenarios of wireless video sensor networks (WVSNs), a number of video sensors are deployed, and multidimension monitored the visual information in a region of interest, forming multiview videos. Since the power, computing capability, and bandwidth are very limited in WVSNs, the conventional multiview video coding method is no longer applicable. So multiview distributed video coding (MDVC) emerged and developed rapidly. In this paper, we propose a new multiview video coding and postprocessing framework for multiview videos. First, in coding scheme, motion intense regions (MIRs) and nonmotion intense regions (NMIRs) based on sum of absolute difference (SAD) criteria are distinguished. For the MIR, the side information (SI) is generated by fusion temporal SI and interview spatial SI at the pixel level. But for the NMIR, the temporal SI is directly use as the ultimate SI. Then, to further improve the quality of the decoded image, an image postprocessing scheme is designed by using deblocking and deringing artifact filters on decoded image. Finally, a set of experimental results show that the proposed fusion SI approach can bring improvements up to 0.2–0.5 dB when compares with only temporal SI used. The subsequent decoded videos postprocessing simulation proves that the proposed postprocessing scheme can provide an additional improvement of about 0.1 dB to the decoded video sequences.

Description: Duty-cycled operation has been introduced as an efficient way to preserve nodes energy and prolong network lifetime for wireless sensor networks. However, such networks are often logically disconnected since there is a limited number of active nodes within a period of time. Traditional routing algorithms, which have been designed for always-awake wireless networks, suffer excessive waiting time incurred by asynchronous schedule of nodes and cannot be applied to these time-dependent sensor networks. In this work, we study the optimization of delivery delay for low-duty-cycle sensor networks. Specially, we theoretically analyze the sleep latency in low-duty-cycle networks and present a new routing metric, which takes both lossy link and asynchronous schedule of nodes into consideration. Based on the metric, we propose delay-driven routing algorithms to find optimal forwarder in order to reduce delivery delay for source-to-sink communication. We compare our design against state-of-the-art routing algorithms derived in wireless networks through large-scale simulations and testbed experiments, which show that our algorithms can achieve a significant reduction in delivery delay.

Description: It is very important to detect a collapse hole for coal mine workers. The possibility of detecting the collapse hole using WSN is presented because the tunnel in coal mine is narrow and has poor working condition. Comparing three types of the hole detection methods, it is seen that the connectivity-based methods are used to detect coal mine collapse better than other methods. By establishing a 2D model of the collapse hole in coal mine, a class of algorithms for detecting the collapse hole in coal mine is described. Based on log-normal shadowing channel model, the accuracy of detecting the collapse hole in coal mine using Fisher information is analyzed. Numerical calculation shows that connectivity-based localization schemes are better to detect collapse hole of coal mine.

Description: Cyclic and square wave voltammetries have been used to study electrochemical behaviour of an anti-HIV agent (Guttiferone A) at the liquid-liquid interface. The thin organic membrane is formed by an organic solvent containing redox probe. Guttiferone A, a benzophenone (BP) with appropriate electrolyte. It is demonstrated that BP possesses three reduction systems due to the redox transformation of the three tautomeric forms that lead to the migration of proton between the hydroxyl group in position 4 and the carbonyl group in positions 2 and 10. The transfer of proton from the aqueous solution to the organic phase is crucial for the redox transformation of BP into the organic membrane. The voltammograms obtained are strongly influenced by the pH of the aqueous phase. The electrochemical mechanism consists of 2e−/2H+ exchange to form the separate redox compound BPH2.

Description: High-resolution provenance of desert dust deposited on Mt. Elbrus, Caucasus in 2009–2012 using snow pit and firn core records The Cryosphere, 7, 1481-1498, 2013 Author(s): S. Kutuzov, M. Shahgedanova, V. Mikhalenko, P. Ginot, I. Lavrentiev, and S. Kemp The first record of dust deposition events on Mt. Elbrus, Caucasus Mountains derived from a snow pit and a shallow firn core is presented for the 2009–2012 period. A combination of isotopic analysis, SEVIRI red-green-blue composite imagery, MODIS atmospheric optical depth fields derived using the Deep Blue algorithm, air mass trajectories derived using the HYSPLIT model and analyses of meteorological data enabled identification of dust source regions with high temporal (hours) and spatial (ca. 20–100 km) resolution. Seventeen dust deposition events were detected; fourteen occurred in March–June, one in February and two in October. Four events originated in the Sahara, predominantly in northeastern Libya and eastern Algeria. Thirteen events originated in the Middle East, in the Syrian Desert and northern Mesopotamia, from a mixture of natural and anthropogenic sources. Dust transportation from Sahara was associated with vigorous Saharan depressions, strong surface winds in the source region and mid-tropospheric southwesterly flow with daily winds speeds of 20–30 m s −1 at 700 hPa level. Although these events were less frequent than those originating in the Middle East, they resulted in higher dust concentrations in snow. Dust transportation from the Middle East was associated with weaker depressions forming over the source region, high pressure centred over or extending towards the Caspian Sea and a weaker southerly or southeasterly flow towards the Caucasus Mountains with daily wind speeds of 12–18 m s −1 at 700 hPa level. Higher concentrations of nitrates and ammonium characterised dust from the Middle East deposited on Mt. Elbrus in 2009 indicating contribution of anthropogenic sources. The modal values of particle size distributions ranged between 1.98 μm and 4.16 μm. Most samples were characterised by modal values of 2.0–2.8 μm with an average of 2.6 μm and there was no significant difference between dust from the Sahara and the Middle East.

Description: Simulating the role of gravel on the dynamics of permafrost on the Qinghai-Tibetan Plateau The Cryosphere Discussions, 7, 4703-4740, 2013 Author(s): S. Yi, J. Chen, Q. Wu, and Y. Ding Gravel (particle size ≥ 2 mm) is common in soil profiles of the Qinghai-Tibetan Plateau (QTP). It has different thermal and hydrological properties than other fine mineral soils (particle size 〈 2 mm), which may have significant impacts on the thermal and hydrological processes of soil. However, few models have considered gravel. In this study, we implemented the thermal and hydraulic properties of gravel into the Dynamic Organic Soil-Terrestrial Ecosystem Model to develop new schemes to simulate the dynamics of permafrost on the QTP. Results showed that: (1) the widely used Farouki thermal scheme always simulated higher thermal conductivity of frozen soils than unfrozen soils with the same soil water content; therefore it tends to overestimate permafrost thickness strongly; (2) there exists a soil moisture threshold, below which the new set of schemes with gravel simulated smaller thermal conductivity of frozen soils than unfrozen soils; (3) soil with gravel has higher hydraulic conductivity and poorer water retention capability; and simulations with gravel were usually drier than those without gravel; and (4) the new schemes simulated faster upward degradation than downward degradation; and the simulated permafrost thicknesses were sensitive to the fraction of gravel, the gravel size, the thickness of soil with gravel, and the subsurface drainage. To reduce the uncertainties in the projection of permafrost degradation on the QTP, more effort should be made to: (1) developing robust relationships between soil thermal and hydraulic properties and gravel characteristics based on laboratory work; and (2) compiling spatial datasets of the vertical distribution of gravel content based on measurements during drilling or the digging of soil pits.

Description: Changes in glacier equilibrium-line altitude in the western Alps from 1984 to 2010: evaluation by remote sensing and modeling of the morpho-topographic and climate controls The Cryosphere, 7, 1455-1471, 2013 Author(s): A. Rabatel, A. Letréguilly, J.-P. Dedieu, and N. Eckert We present time series of equilibrium-line altitude (ELA) measured from the end-of-summer snow line altitude computed using satellite images, for 43 glaciers in the western Alps over the 1984–2010 period. More than 120 satellite images acquired by Landsat, SPOT and ASTER were used. In parallel, changes in climate variables, summer cumulative positive degree days (CPDD) and winter precipitation, were analyzed over the same time period using 22 weather stations located inside and around the study area. Assuming a continuous linear trend over the study period: (1) the average ELA of the 43 glaciers increased by about 170 m; (2) summer CPDD increased by about 150 PDD at 3000 m a.s.l.; and (3) winter precipitation remained rather stationary. Summer CPDD showed homogeneous spatial and temporal variability; winter precipitation showed homogeneous temporal variability, but some stations showed a slightly different spatial pattern. Regarding ELAs, temporal variability between the 43 glaciers was also homogeneous, but spatially, glaciers in the southern part of the study area differed from glaciers in the northern part, mainly due to a different precipitation pattern. A sensitivity analysis of the ELAs to climate and morpho-topographic variables (elevation, aspect, latitude) highlighted the following: (1) the average ELA over the study period of each glacier is strongly controlled by morpho-topographic variables; and (2) the interannual variability of the ELA is strongly controlled by climate variables, with the observed increasing trend mainly driven by increasing temperatures, even if significant nonlinear, low-frequency fluctuations appear to be driven by winter precipitation anomalies. Finally, we used an expansion of Lliboutry's approach to reconstruct fluctuations in the ELA of any glacier of the study area with respect to morpho-topographic and climate variables, by quantifying their respective weight and the related uncertainties in a consistent manner within a hierarchical Bayesian framework. This method was tested and validated using the ELA measured on the satellite images.

Description: Attribution of hydrologic forecast uncertainty within scalable forecast windows Hydrology and Earth System Sciences Discussions, 10, 11795-11828, 2013 Author(s): L. Yang, F. Tian, Y. Sun, X. Yuan, and H. Hu Hindcasts based on the Extended Streamflow Prediction (ESP) approach are carried out in a typical rainfall-dominated basin in China, aiming to examine the roles of initial condition (IC), future atmospheric forcing (FC) and hydrologic model uncertainty (MU) in the streamflow forecast skill. The combined effects of IC and FC are explored within the framework of a forecast window. By implementing virtual numerical simulations without the consideration of MU, it is found that the dominance of IC could last up to 90 days in dry season, while its impact gives way to FC for lead times exceeding 30 days in the wet season. The combined effects of IC and FC on the forecast skill are further investigated by proposing a dimensionless parameter ( β ) that represents the ratio of the total amount of initial water storage and the incoming rainfall. The forecast skill increases exponentially with β , and varies greatly in different forecast windows. Moreover, the influence of MU on forecast skill is examined by focusing on the uncertainty of model parameters. Two different hydrologic model calibration strategies are carried out. The results indicate that the uncertainty of model parameters exhibits a more significant influence on the forecast skill in the dry season than in the wet season. The ESP approach is more skillful in monthly streamflow forecast during the transition period from wet to dry than otherwise. For the transition period from dry to wet, the low skill of the forecasts could be attributed to the combined effects of IC and FC, but less to the biases in the hydrologic model parameters. For the forecasting in dry season, the usefulness of the ESP approach is heavily dependent on the strategy of the model calibration.

Description: Integrating spatial, temporal, and size probabilities for the annual landslide hazard maps in the Shihmen watershed, Taiwan Natural Hazards and Earth System Science, 13, 2353-2367, 2013 Author(s): C. Y. Wu and S. C. Chen Landslide spatial, temporal, and size probabilities were used to perform a landslide hazard assessment in this study. Eleven intrinsic geomorphological, and two extrinsic rainfall factors were evaluated as landslide susceptibility related factors as they related to the success rate curves, landslide ratio plots, frequency distributions of landslide and non-landslide groups, as well as probability–probability plots. Data on landslides caused by Typhoon Aere in the Shihmen watershed were selected to train the susceptibility model. The landslide area probability, based on the power law relationship between the landslide area and a noncumulative number, was analyzed using the Pearson type 5 probability density function. The exceedance probabilities of rainfall with various recurrence intervals, including 2, 5, 10, 20, 50, 100 and 200 yr, were used to determine the temporal probabilities of the events. The study was conducted in the Shihmen watershed, which has an area of 760 km 2 and is one of the main water sources for northern Taiwan. The validation result of Typhoon Krosa demonstrated that this landslide hazard model could be used to predict the landslide probabilities. The results suggested that integration of spatial, area, and exceedance probabilities to estimate the annual probability of each slope unit is feasible. The advantage of this annual landslide probability model lies in its ability to estimate the annual landslide risk, instead of a scenario-based risk.

Description: Nowadays, the fractal is used widely everywhere. Then, its creating time becomes an important study area for complex iteration functions because the escape-time algorithm (ETA), which is the most used algorithm in fractal creating, performs not so well in this condition. In this paper, in order to solve this problem, we improve ETA into the parallel environment and reach well performance. At first, we provide a separation method of ETA to reform it into a SIMC-MC2 grid. Secondly, we prove its correctness and compute the complexity of this novel parallel algorithm. Meantime, we separate an improved ETA which we have presented into the same parallel environment and compute its complexity. Additionally, theoretical and experimental results show the characteristics of this novel algorithm. Finally, the computational result shows that a novel environment is needed to decrease large manual allocation strategies, which block the improved benefit.

Description: To improve the energy efficiency and the transmission performance of a sensor network MAC protocol under time varying traffic conditions, recent researches have adopted a variable duty cycle operation that makes each node dynamically adjust its own wakeup and sleep schedule according to a predefined trigger condition. However, most of the existing protocols still waste energy on a long preamble packet for waking up a receiver or long idle listening for checking potential communications. To address the energy waste problem, this paper introduces a hybrid MAC protocol called A+MAC that exploits a complementary cooperation between CSMA/CA and preamble sampling. In A+MAC CSMA/CA is used for carrying out communication processes, and preamble sampling is used for checking potential communications. Therefore, A+MAC minimizes both idle listening and the length of a preamble packet by exploiting a short preamble that makes nodes check only the event occurrence. A+MAC also optimizes control packet formats and eliminates both virtual carrier sensing and a separate clock synchronization period from conventional CSMA/CA based MAC protocols. We evaluated both the energy and the network performance of the protocol by using both NS-2 and MICA2 platforms. Our experimentation results show that A+MAC can achieve an order of magnitude energy savings while providing near optimal latency compared to the existing solutions.

Description: Post-processing rainfall forecasts from numerical weather prediction models for short-term streamflow forecasting Hydrology and Earth System Sciences, 17, 3587-3603, 2013 Author(s): D. E. Robertson, D. L. Shrestha, and Q. J. Wang Sub-daily ensemble rainfall forecasts that are bias free and reliably quantify forecast uncertainty are critical for flood and short-term ensemble streamflow forecasting. Post-processing of rainfall predictions from numerical weather prediction models is typically required to provide rainfall forecasts with these properties. In this paper, a new approach to generate ensemble rainfall forecasts by post-processing raw numerical weather prediction (NWP) rainfall predictions is introduced. The approach uses a simplified version of the Bayesian joint probability modelling approach to produce forecast probability distributions for individual locations and forecast lead times. Ensemble forecasts with appropriate spatial and temporal correlations are then generated by linking samples from the forecast probability distributions using the Schaake shuffle. The new approach is evaluated by applying it to post-process predictions from the ACCESS-R numerical weather prediction model at rain gauge locations in the Ovens catchment in southern Australia. The joint distribution of NWP predicted and observed rainfall is shown to be well described by the assumed log-sinh transformed bivariate normal distribution. Ensemble forecasts produced using the approach are shown to be more skilful than the raw NWP predictions both for individual forecast lead times and for cumulative totals throughout all forecast lead times. Skill increases result from the correction of not only the mean bias, but also biases conditional on the magnitude of the NWP rainfall prediction. The post-processed forecast ensembles are demonstrated to successfully discriminate between events and non-events for both small and large rainfall occurrences, and reliably quantify the forecast uncertainty. Future work will assess the efficacy of the post-processing method for a wider range of climatic conditions and also investigate the benefits of using post-processed rainfall forecasts for flood and short-term streamflow forecasting.

Description: On the puzzling feature of the silence of precursory electromagnetic emissions Natural Hazards and Earth System Science, 13, 2381-2397, 2013 Author(s): K. Eftaxias, S. M. Potirakis, and T. Chelidze It has been suggested that fracture-induced MHz–kHz electromagnetic emissions (EME), which emerge from a few days up to a few hours before the main seismic shock occurrence permit a real-time monitoring of the damage process during the last stages of earthquake preparation, as it happens at the laboratory scale. Despite fairly abundant evidence, electromagnetic (EM) precursors have not been adequately accepted as credible physical phenomena. These negative views are enhanced by the fact that certain "puzzling features" are repetitively observed in candidate fracture-induced pre-seismic EME. More precisely, EM silence in all frequency bands appears before the main seismic shock occurrence, as well as during the aftershock period. Actually, the view that "acceptance of "precursive" EM signals without convincing co-seismic signals should not be expected" seems to be reasonable. In this work we focus on this point. We examine whether the aforementioned features of EM silence are really puzzling ones or, instead, reflect well-documented characteristic features of the fracture process, in terms of universal structural patterns of the fracture process, recent laboratory experiments, numerical and theoretical studies of fracture dynamics, critical phenomena, percolation theory, and micromechanics of granular materials. Our analysis shows that these features should not be considered puzzling.

Description: A note on the water budget of temperate glaciers The Cryosphere, 7, 1557-1564, 2013 Author(s): J. Oerlemans In this note, the total dissipative melting in temperate glaciers is studied. The analysis is based on the notion that the dissipation is determined by the loss of potential energy due to the downward motion of mass (ice, snow, meltwater and rain). A mathematical formulation of the dissipation is developed and applied to a simple glacier geometry. In the next step, meltwater production resulting from enhanced ice motion during a glacier surge is calculated. The amount of melt energy available follows directly from the lowering of the centre of gravity of the glacier. To illustrate the concept, schematic calculations are presented for a number of glaciers with different geometric characteristics. Typical dissipative melt rates, expressed as water-layer depth averaged over the glacier, range from a few centimetres per year for smaller glaciers to half a metre per year for Franz Josef Glacier, one of the most active glaciers in the world (in terms of mass turnover). The total generation of meltwater during a surge is typically half a metre. For Variegated Glacier a value of 70 cm is found, for Kongsvegen 20 cm. These values refer to water layer depth averaged over the entire glacier. The melt \textit{rate} depends on the duration of the surge. It is generally an order of magnitude greater than water production by `normal' dissipation. On the other hand, the additional basal melt rate during a surge is comparable in magnitude with the water input from meltwater and precipitation. This suggests that enhanced melting during a surge does not grossly change the total water budget of a glacier. Basal water generated by enhanced sliding is an important ingredient in many theories of glacier surges. It provides a positive feedback mechanism that actually makes the surge happen. The results found here suggest that this can only work if water generated by enhanced sliding accumulates in a part of the glacier base where surface meltwater and rain have no or very limited access. This finding seems compatible with the fact that, on many glaciers, surges are initiated in the lower accumulation zone.

Description: In this paper, we introduce a novel design of high-performance smart card with HF/UHF dual-band RFID tag to overcome frequency interference problem. Firstly, we have designed and tested a UHF RFID tag using a simulation software system. In the smart card hardware design stage, we connect a HF antenna and a UHF antenna and place them in one inlay sheet. Using a spectrum analyzer, we systematically adjust the antenna pattern to detect the optimal patterns that fit the impedance of the RFID chip. We evaluate the performance of the resulting smart card with standard RFID testers. The experiments show that our proposed RFID tag outperforms other dual-band RFID tags and maintains itself in a reasonable size. Moreover, we increase IC chip's memory capacity to resolve security-related problems when RFID tags are used in a financial transaction. We firstly exploit an IC contact protruded from the card to add an additional memory, and we integrate functions of the RFID tag to use the equipped memory through the induced current of the contact. The implemented prototype of our proposal can accommodate an extended memory ranging from one gigabyte up to four gigabytes.

Description: This paper presents an integer linear programming model devoted to optimize the energy consumption efficiency in heterogeneous wireless sensor networks. This model is based upon a schedule of sensor allocation plans in multiple time intervals subject to coverage and connectivity constraints. By turning off specifics sets of redundant sensors in each time interval, it is possible to reduce the total energy consumption in the network and, at the same time, avoid partitioning the whole network by losing some strategic sensors too prematurely. Since the network is heterogeneous, sensors can sense different phenomena from different demand points, with different sample rates. By resorting to this model, it is possible to provide extra lifetime to heterogeneous wireless sensor networks, reducing their setup and maintenance costs. This is an important issue to be considered when deploying sensor devices in hostile and inaccessible environments.

Description: This work presented the successful fabrication of dye-sensitized solar cell using polyaniline base (EB), multiwalled carbon nanotubes (MWCNTs), organic dye (rhodamine B or riboflavin), zinc oxide (ZnO), and indium tin oxide (ITO). The electrical properties of the resultant devices were investigated by measuring the current density voltage (-), capacitance voltage (-), and impedance measurements under both dark and illuminated conditions. The photovoltaic cell characteristics, that is, open circuit voltage (), short circuit current density (), and energy conversion efficiency (), were evaluated under illumination and were found to be 0.48 mA/cm2, 400 mV, and 0.224%, respectively, for ITO/EB-MWCNTs/ZnO-rhodamine B/ITO heterostructure. Using impedance spectra, it was found that the series resistances of this type of solar cell are 62 and 60 Ω under darkness and illumination, respectively.

Description: Frame synchronization time of geostationary Earth orbit (GEO) satellites is faster than that of incline geosynchronous satellite orbit and medium Earth orbit satellites in Beidou navigation satellite system (BDS). So time to first fix can be reduced greatly with GEO satellites (GEOs) to provide emergency positioning service during the cold start process. Meanwhile, GEOs can also be utilized to provide radio determination satellite services. Therefore, it is meaningful to research the emergency positioning algorithm based on GEOs. However, due to the poor geometry of the GEOs, the availability and accuracy degrade distinctly. To solve this problem, a low-cost high resolution MS5534B barometric (baro-) module is applied to BDS. Firstly, the principle of emergency positioning based on a baro-altimeter sensor and its performance such as the accuracy are elaborated. Then the effects of baro-altimeter sensor measurement error on positioning are analyzed. Finally, after analyzing the limitation of the conventional algorithms, a new high-accuracy emergency positioning algorithm with baro-altimeter sensor aiding is proposed, which is not limited by the integration and user’s altitude. In comparison to the conventional algorithms, the stimulant and experimental results validate the effectiveness, robustness, and higher performance of the proposed algorithms incorporated with sensors.

Description: A conceptual model of check dam hydraulics for gully control Hydrology and Earth System Sciences Discussions, 10, 11901-11941, 2013 Author(s): C. Castillo, R. Pérez, and J. A. Gómez There is little information in scientific literature regarding the modifications induced by check dam systems in flow regimes in restored gully reaches, despite it being a crucial issue for the design of conservation measures. Here, we develop a conceptual model to classify flow regimes in straight rectangular channels for initial and dam-filling conditions as well as a method of estimating efficiency in order to provide guidelines for optimal design. The model integrates several previous mathematical approaches for assessing the main processes involved (hydraulic jump HJ, impact flow, gradually varied flows). Its performance was compared with the simulations obtained from IBER, a bi-dimensional hydrodynamic model. The impact of check dam spacing (defined by the geometric factor of influence c ) on efficiency was explored. Eleven main classifications of flow regimes were identified depending on the element and level of influence. The model produced similar results when compared with IBER, but led to higher estimations of HJ and impact lengths. Total influence guaranteed maximum efficiency and HJ control defining the location of the optimal c . Geometric total influence ( c = 1) was a valid criterion for the different stages of the structures in a wide range of situations provided that hydraulic roughness conditions remained high within the gully, e.g. through revegetation. Our total influence criterion involved shorter spacing than that habitually recommended in technical manuals for restoration, but was in line with those values found in spontaneous and stable step-pools systems, which might serve as a reference for man-made interventions.

Description: Comparison of climate change signals in CMIP3 and CMIP5 multi-model ensembles and implications for Central Asian glaciers Hydrology and Earth System Sciences, 17, 3661-3677, 2013 Author(s): A. F. Lutz, W. W. Immerzeel, A. Gobiet, F. Pellicciotti, and M. F. P. Bierkens Central Asian water resources largely depend on melt water generated in the Pamir and Tien Shan mountain ranges. To estimate future water availability in this region, it is necessary to use climate projections to estimate the future glacier extent and volume. In this study, we evaluate the impact of uncertainty in climate change projections on the future glacier extent in the Amu and Syr Darya river basins. To this end we use the latest climate change projections generated for the upcoming IPCC report (CMIP5) and, for comparison, projections used in the fourth IPCC assessment (CMIP3). With these projections we force a regionalized glacier mass balance model, and estimate changes in the basins' glacier extent as a function of the glacier size distribution in the basins and projected temperature and precipitation. This glacier mass balance model is specifically developed for implementation in large scale hydrological models, where the spatial resolution does not allow for simulating individual glaciers and data scarcity is an issue. Although the CMIP5 ensemble results in greater regional warming than the CMIP3 ensemble and the range in projections for temperature as well as precipitation is wider for the CMIP5 than for the CMIP3, the spread in projections of future glacier extent in Central Asia is similar for both ensembles. This is because differences in temperature rise are small during periods of maximum melt (July–September) while differences in precipitation change are small during the period of maximum accumulation (October–February). However, the model uncertainty due to parameter uncertainty is high, and has roughly the same importance as uncertainty in the climate projections. Uncertainty about the size of the decline in glacier extent remains large, making estimates of future Central Asian glacier evolution and downstream water availability uncertain.

Description: This paper focuses on the modeling method of common interconnects which act as coupling channels in the analysis of PCB immunity. Fast modeling and parameters extraction of power/ground plane pair are realized using cavity resonance method. The calculated results of the model match with the simulation results of HFSS within 9 GHz, which demonstrates the effectiveness of the modeling method. Besides, segmented via modeling method including the effect of power/ground plane pair is proposed. In this modeling method, via structure is decomposed into three parts, and each part is modeled, respectively. The modeling of single via and differential vias in single plane pair and multilayer is completed using this method. High accuracy is reached due to the adoption of the effect of power/ground plane pair and the adoption of second-order circuit model of capacitance and inductance, where the parameters can be gotten from analytic formulas. Finally, considering an actual signal network, for example, the equivalent circuit model of the network, is established, and every part of the equivalent circuit model is imported into Designer for cosimulation. The results are consistent with the simulation results of HFSS within 9 GHz.

Description: Most broadband microstrip antennae are implemented in the form of slot structure or laminate structure. The impedance bandwidth is broadened, but meanwhile, the sidelobe of the directivity pattern and backlobe level are enlarged. A broadband stacked slot coupling microstrip antenna array with EBG structure reflector is proposed. Test results indicate that the proposed reflector structure can effectively improve the directivity pattern of stacked antenna and aperture coupled antenna, promote the front-to-back ratio, and reduce the thickness of the antenna. Therefore, it is more suitable to be applied as an airborne antenna.

Description: In self-organized wireless sensor networks (WSNs), any two sensor nodes can connect if they are placed in each other's communication range. Therefore, the physical topology of WSNs is usually a strongly connected topology. Sensor nodes should frequently receive and process data from their large number of neighbors, which will consume great amounts of energy. Shocking wireless channel collision also causes low throughput and high loss packets ratio during data transmission. To improve the transmission performance and save scarce energy, a logical topology generating from the physical one is necessary for the self-organized WSNs. Based on the complex network theory, this paper proposed a novel betweenness addition edges expansion algorithm (BAEE). With betweenness calibration, BAEE algorithm expanded the minimum-cost edges to optimize the network topology. Two performance metrics-connectivity functions, robustness function and efficiency function , were utilized to evaluate the network capability of the robustness and invulnerability. is the parameter to measure the topology connectivity, and is the parameter to evaluate the network exchanging information capability. Based on the simulation under various random failures and intentional attack scenarios, BAEE can effectively optimize WSNs' topology and improve the network's robust connectivity and extremely efficient exchanging information capability.

Description: In many sensor network applications, energy efficiency and latency are major design criteria because battery-operated sensor nodes limit network lifetime. In this paper, we propose a new contention-based duty-cycle MAC protocol using a synchronized approach for use in wireless sensor networks. In the proposed MFT-MAC protocol, we use a control frame that considers the number of DATA frames to be transmitted to the next node in order to improve the energy efficiency and reduce the end-to-end delay. During the SLEEP period, each node transmits multiple DATA frames to the next node through the use of the control frame. The performance of the proposed MAC protocol is confirmed through the use of NS-2 simulator.

Description: Herein, Fe3O4 magnetic nanoparticles (MNPs) were synthesized and characterized. Afterward, a magnetic carbon paste electrode (MCPE) was modified with MNPs via casting and drying MNPs on top of the MCPE (MCPE/MNP). Electrochemical behavior of the MCPE/MNP was studied by cyclic voltammetry in the presence of [Fe(CN)6]3−/4− as a redox probe, and surface of MNPs was evaluated as . The behavior of MCPE/MNP towards dopamine (DA) and ascorbic acid (AA) has been investigated by electrochemical methods, and the obtained results showed that the MCPE/MNP has adsorption behavior towards only DA. Based on this behavior, the DA molecules were pre-concentrated on top of the MCPE/MNP and followed with stripping in DA free solution. Subsequent to experimental and instrumental optimization, a calibration curve from to  M DA with , DL =  M DA, and RSD = 4.6%, was obtained in the presence of  M AA. Performance of the MCPE/MNP was successfully tested in a pharmaceutical sample.

Description: Prediction of dissolved reactive phosphorus losses from small agricultural catchments: calibration and validation of a parsimonious model Hydrology and Earth System Sciences, 17, 3679-3693, 2013 Author(s): C. Hahn, V. Prasuhn, C. Stamm, P. Lazzarotto, M. W. H. Evangelou, and R. Schulin Eutrophication of surface waters due to diffuse phosphorus (P) losses continues to be a severe water quality problem worldwide, causing the loss of ecosystem functions of the respective water bodies. Phosphorus in runoff often originates from a small fraction of a catchment only. Targeting mitigation measures to these critical source areas (CSAs) is expected to be most efficient and cost-effective, but requires suitable tools. Here we investigated the capability of the parsimonious Rainfall-Runoff-Phosphorus (RRP) model to identify CSAs in grassland-dominated catchments based on readily available soil and topographic data. After simultaneous calibration on runoff data from four small hilly catchments on the Swiss Plateau, the model was validated on a different catchment in the same region without further calibration. The RRP model adequately simulated the discharge and dissolved reactive P (DRP) export from the validation catchment. Sensitivity analysis showed that the model predictions were robust with respect to the classification of soils into "poorly drained" and "well drained", based on the available soil map. Comparing spatial hydrological model predictions with field data from the validation catchment provided further evidence that the assumptions underlying the model are valid and that the model adequately accounts for the dominant P export processes in the target region. Thus, the parsimonious RRP model is a valuable tool that can be used to determine CSAs. Despite the considerable predictive uncertainty regarding the spatial extent of CSAs, the RRP can provide guidance for the implementation of mitigation measures. The model helps to identify those parts of a catchment where high DRP losses are expected or can be excluded with high confidence. Legacy P was predicted to be the dominant source for DRP losses and thus, in combination with hydrologic active areas, a high risk for water quality.

Description: Senstitivity of water balance components to environmental changes in a mountainous watershed: uncertainty assessment based on models comparison Hydrology and Earth System Sciences Discussions, 10, 11983-12026, 2013 Author(s): E. Morán-Tejeda, J. Zabalza, K. Rahman, A. Gago-Silva, J. I. López-Moreno, S. Vicente-Serrano, A. Lehmann, C. L. Tague, and M. Beniston This paper evaluates the response of stream flow and other components of the water balance to changes in climate and land-use in a Pyrenean watershed. It further provides a measure of uncertainty in water resources forecasts by comparing the performance of two hydrological models: Soil and Water Assessment Tool (SWAT) and Regional Hydro-Ecological Simulation System (RHESSys). Regional Climate Model outputs for the 2021–2050 time-frame, and hypothetical (but plausible) land-use scenarios considering re-vegetation and wildfire processes were used as inputs to the models. Results indicate an overall decrease in river flows when the scenarios are considered, except for the post-fire vegetation scenario, in which stream flows are simulated to increase. However the magnitude of these projections varies between the two models used, as SWAT tends to produce larger hydrological changes under climate change scenarios, and RHESSys shows more sensitivity to changes in land-cover. The final prediction will therefore depend largely on the combination of the land-use and climate scenarios, and on the model utilized.

Description: Ice volume estimates for the Himalaya–Karakoram region: evaluating different methods The Cryosphere Discussions, 7, 4813-4854, 2013 Author(s): H. Frey, H. Machguth, M. Huss, C. Huggel, S. Bajracharya, T. Bolch, A. Kulkarni, A. Linsbauer, N. Salzmann, and M. Stoffel Ice volume estimates are crucial for assessing water reserves stored in glaciers. A variety of different methodologies exist but there is a lack of systematic comparative analysis thereof. Due to its large glacier coverage, such estimates are of particular interest for the Himalayan-Karakoram (HK) region. Here, three volume–area (V–A) relations, a slope-dependent estimation method, and two ice-thickness distribution models are applied to a complete glacier inventory of the HK region. An uncertainty and sensitivity assessment is performed to investigate the influence of the input glacier areas, and model approaches and parameters on the resulting total ice volumes. Results of the two ice-thickness distribution models are validated with local ice-thickness measurements at six glaciers. The resulting ice volumes for the entire HK region range from 2955 km 3 to 6455 km 3 , depending on the approach. Results from the ice thickness distribution models and the slope-dependent thickness estimations agree well with measured local ice thicknesses while V–A relations show stronger deviations. The study provides evidence on the significant effect of the selected method on results and underlines the importance of a careful and critical evaluation. More ice-thickness measurements are needed to improve models and results in the future.

Description: PP-1 is a scalable block cipher which can be implemented on a platform with limited resource. In this paper, we analyze the security of PP-1 by using truncated differential cryptanalysis. As concrete examples, we consider four versions of PP-1, PP-1/64, PP-1/128, PP-1/192, and PP-1/256. Our attack is applicable to full-round versions of them, respectively. The proposed attacks can recover a secret key of PP-1 with the computational complexity which is faster than the exhaustive search. These are the first known cryptanalytic results on PP-1.

Description: This paper considers the problem of suppressing the repeat-intensive false targets produced by a deception electronic attack (EA) system equipped with a Digital Radio Frequency Memory (DRFM) device. Different from a conventional repeat jammer, this type of jamming intensively retransmits the intercepted signal stored in a DRFM to the victim radar in a very short time-delay interval relative to a radar pulse wide. A multipeak matched-filtering output is then produced other than the merely expected true target. An electronic protection (EP) algorithm based on the space time block code (STBC) is proposed to suppress the adverse effects of this jammer. By transmitting a pulse sequence generated from the STBC in succession and the following cancellation process applied upon the received signal, this algorithm performs successfully in a single antenna system provided that the target models are nonfluctuating or slow fluctuating and the pulse repetition frequency (PRF) is comparatively high. The performance in white and correlated Gaussian disturbance is evaluated by means of Monte Carlo simulations.

Description: Black carbon concentrations from a Tibetan Plateau ice core spanning 1843–1982: recent increases due to emissions and glacier melt The Cryosphere Discussions, 7, 4855-4880, 2013 Author(s): M. Jenkins, S. Kaspari, S. Kang, B. Grigholm, and P. A. Mayewski Black carbon (BC) deposited on snow and glacier surfaces can reduce albedo and lead to accelerated melt. An ice core recovered from Guoqu glacier on Mt. Geladaindong and analyzed using a Single Particle Soot Photometer provides the first long-term (1843–1982) record of BC concentrations from the Central Tibetan Plateau. The highest concentrations are observed from 1975–1982, which corresponds to a 2.0-fold and 2.4-fold increase in average and median values, respectively, relative to 1843–1940. BC concentrations post-1940 are also elevated relative to the earlier portion of the record. Causes for the higher BC concentrations include increased regional BC emissions and subsequent deposition, and melt induced enrichment of BC, with the melt potentially accelerated due to the presence of BC at the glacier surface. A qualitative comparison of the BC and Fe (used as a dust proxy) records suggests that if changes in the concentrations of absorbing impurities at the glacier surface have influenced recent glacial melt, the melt may be due to the presence of BC rather than dust. Guoqu glacier has received no net ice accumulation since the 1980s, and is a potential example of a glacier where an increase in the equilibrium line altitude is exposing buried high impurity layers. That BC concentrations in the uppermost layers of the Geladaindong ice core are not substantially higher relative to deeper in the ice core suggests that some of the BC that must have been deposited on Guoqu glacier via wet or dry deposition between 1983 and 2005 has been removed from the surface of the glacier, potentially via supraglacial or englacial meltwater.

Description: High-resolution Med-CORDEX regional climate model simulations for hydrological impact studies: a first evaluation of the ALADIN-Climate model in Morocco Hydrology and Earth System Sciences, 17, 3721-3739, 2013 Author(s): Y. Tramblay, D. Ruelland, S. Somot, R. Bouaicha, and E. Servat In the framework of the international CORDEX program, new regional climate model (RCM) simulations at high spatial resolutions are becoming available for the Mediterranean region (Med-CORDEX initiative). This study provides the first evaluation for hydrological impact studies of one of these high-resolution simulations in a 1800 km 2 catchment located in North Morocco. Different approaches are compared to analyze the climate change impacts on the hydrology of this catchment using a high-resolution RCM (ALADIN-Climate) from the Med-CORDEX initiative at two different spatial resolutions (50 and 12 km) and for two different Radiative Concentration Pathway scenarios (RCP4.5 and RCP8.5). The main issues addressed in the present study are: (i) what is the impact of increased RCM resolution on present-climate hydrological simulations and on future projections? (ii) Are the bias-correction of the RCM model and the parameters of the hydrological model stationary and transferable to different climatic conditions? (iii) What is the climate and hydrological change signal based on the new Radiative Concentration Pathways scenarios (RCP4.5 and RCP8.5)? Results indicate that high resolution simulations at 12 km better reproduce the seasonal patterns, the seasonal distributions and the extreme events of precipitation. The parameters of the hydrological model, calibrated to reproduce runoff at the monthly time step over the 1984–2010 period, do not show a strong variability between dry and wet calibration periods in a differential split-sample test. However the bias correction of precipitation by quantile-matching does not give satisfactory results in validation using the same differential split-sample testing method. Therefore a quantile-perturbation method that does not rely on any stationarity assumption and produces ensembles of perturbed series of precipitation was introduced. The climate change signal under scenarios 4.5 and 8.5 indicates a decrease of respectively −30 to −57% in surface runoff for the mid-term (2041–2062), when for the same period the projections for precipitation are ranging between −15 and −19% and for temperature between +1.3 and +1.9 °C.

Description: Hydrologic impact of climate change on Murray Hotham catchment of Western Australia: a projection of rainfall-runoff for future water resources planning Hydrology and Earth System Sciences Discussions, 10, 12027-12076, 2013 Author(s): S. A. Islam, M. A. Bari, and A. H. M. F. Anwar Reduction of rainfall and runoff in recent years across South West Western Australia (SWWA) has drawn attention about climate change impact on water resources and its availability in this region. In this paper, hydrologic impact of climate change on Murray Hotham catchment in SWWA is investigated using multi-model ensemble approach. The Land Use Change Incorporated Catchment (LUCICAT) model was used for hydrologic modelling. Model calibration was performed using (5 km) grid rainfall data from Australian Water Availability Project (AWAP). Downscaled and bias corrected rainfall data from 11 General Circulation Models (GCMs) for Intergovernmental Panel on Climate Change (IPCC) emission scenarios A2 and B1 was used in LUCICAT model to derive rainfall and runoff scenarios for 2046–2065 (mid this century) and 2081–2100 (late this century). The results of climate scenarios were compared with observed past (1961–1980) climate. The mean annual rainfall averaged over the catchment during recent time (1981–2000) was reduced by 2.3% with respect to observed past (1961–1980) and resulting runoff reduction was found 14%. Compared to the past, the mean annual rainfall reductions, averaged over 11 ensembles and over the period for the catchment for A2 scenario are 13.6 and 23.6% for mid and late this century respectively while the corresponding runoff reductions are 36 and 74%. For B1 scenario, the rainfall reductions were 11.9 and 11.6% for mid and late this century and corresponding runoff reductions were 31 and 38%. Spatial distribution of rainfall and runoff changes showed that the rate of changes were higher in high rainfall part compared to the low rainfall part. Temporal distribution of rainfall and runoff indicate that high rainfall in the catchment reduced significantly and further reductions are projected resulting significant runoff reductions. A catchment scenario map has been developed through plotting decadal runoff reduction against corresponding rainfall reduction at four gauging stations for observed and projected period. This could be useful for planning future water resources in the catchment. Projection of rainfall and runoff made based on the GCMs varied significantly for the time periods and emission scenarios. Hence, considerable uncertainty involved in this study though ensemble mean was used to explain the findings.

Description: 3D-VAR multilayer assimilation of X-band SAR data into a detailed snowpack model The Cryosphere Discussions, 7, 4881-4912, 2013 Author(s): X. V. Phan, L. Ferro-Famil, M. Gay, Y. Durand, M. Dumont, S. Morin, S. Allain, G. D'Urso, and A. Girard We introduce a variational data assimilation scheme to assimilate X-band Synthetic Aperture Radar (SAR) data into a snowpack evolution model. The structure properties of a snowpack, such as snow density and grain optical diameter of each layer, are simulated over a period of time by the snow metamorphism model Crocus, fed by the local reanalysis SAFRAN at a French alpine location. These parameters are used as inputs of an Electromagnetic Backscattering Model (EBM) based on Dense Media Radiative Transfer (DMRT) theory, which calculates the simulated total backscattering coefficient. Next, 3D-VAR data assimilation is implemented in order to minimize the discrepancies between model simulations and observations obtained from SAR acquisitions, by modifying the parameters of a multilayer snowpack calculated by Crocus. The algorithm then reinitializes Crocus with the optimized snowpack structure properties, and therefore allows it to continue the simulation of snowpack evolution where adjustments based on remote sensing data has been taken into account. Results obtained using TerraSAR-X acquisitions on Argentière Glacier (Mont-Blanc massif, French Alps) show the high potential of this method for improving snow cover simulation.

Description: Global glacier changes: a revised assessment of committed mass losses and sampling uncertainties The Cryosphere, 7, 1565-1577, 2013 Author(s): S. H. Mernild, W. H. Lipscomb, D. B. Bahr, V. Radić, and M. Zemp Most glaciers and ice caps (GIC) are out of balance with the current climate. To return to equilibrium, GIC must thin and retreat, losing additional mass and raising sea level. Because glacier observations are sparse and geographically biased, there is an undersampling problem common to all global assessments. Here, we further develop an assessment approach based on accumulation-area ratios (AAR) to estimate committed mass losses and analyze the undersampling problem. We compiled all available AAR observations for 144 GIC from 1971 to 2010, and found that most glaciers and ice caps are farther from balance than previously believed. Accounting for regional and global undersampling errors, our model suggests that GIC are committed to additional losses of 32 ± 12% of their area and 38 ± 16% of their volume if the future climate resembles the climate of the past decade. These losses imply global mean sea-level rise of 163 ± 69 mm, assuming total glacier volume of 430 mm sea-level equivalent. To reduce the large uncertainties in these projections, more long-term glacier measurements are needed in poorly sampled regions.

Description: To eliminate the location error of MS/AE (microseismic/acoustic emission) monitoring systems caused by the measurement deviations of the wave velocity, a MS/AE source location method using P-wave and S-wave arrivals for unknown velocity system (PSAFUVS) was developed. Arrival times of P-wave and S-wave were used to calculate and fit the MS/AE source location. The proposed method was validated by numerical experimentations. Results show that the proposed method without the need for a premeasured wave velocity has a reasonable and reliable precision. Effects of arrival errors on location accuracy were investigated, and it shows location errors enlarged rapidity with the increase of arrival errors. It is demonstrated the proposed method can not only locate the MS/AE source for unknown velocity system but also determine the real time PS waves velocities for each event in rockmass.

Description: Early warning of snow-caused disasters in pastoral areas on the Tibetan Plateau Natural Hazards and Earth System Science, 13, 1411-1425, 2013 Author(s): W. Wang, T. Liang, X. Huang, Q. Feng, H. Xie, X. Liu, M. Chen, and X. Wang This study develops a model for early warning of snow-caused livestock disasters on a county basis and proposes a method of qualitative risk assessment of snow disasters at 500 m resolution for pastoral areas on the Tibetan Plateau (TP). Data used for the model development include remote sensing data, statistical data of weather, livestock, and social economy, and 45 typical snow disaster cases from 2000 to 2010. The principal component analysis (PCA) approach is used to choose 7 crucial factors that contribute over 85% of information for early warning snow disasters on the TP. They are mean annual probability of snow disaster, number of snow-covered days, livestock stocking rate, continual days of mean daily temperature below −10 °C, grassland burial index, rate of snow-covered grassland, and per livestock gross domestic product. The chosen 411 cases from 2008 to 2010 are used to validate the prediction results from the developed early warning model, with an overall accuracy of 85.64% in predicting snow disasters and no disasters. This suggests that the early warning approach developed in the study has operational potential for predicting snow disasters on the TP.

Description: How much does participatory flood management contribute to stakeholders' social capacity building? Empirical findings based on a triangulation of three evaluation approaches Natural Hazards and Earth System Science, 13, 1427-1444, 2013 Author(s): M. Buchecker, S. Menzel, and R. Home Recent literature suggests that dialogic forms of risk communication are more effective to build stakeholders' hazard-related social capacities. In spite of the high theoretical expectations, there is a lack of univocal empirical evidence on the relevance of these effects. This is mainly due to the methodological limitations of the existing evaluation approaches. In our paper we aim at eliciting the contribution of participatory river revitalisation projects on stakeholders' social capacity building by triangulating the findings of three evaluation studies that were based on different approaches: a field-experimental, a qualitative long-term ex-post and a cross-sectional household survey approach. The results revealed that social learning and avoiding the loss of trust were more relevant benefits of participatory flood management than acceptance building. The results suggest that stakeholder involvements should be more explicitly designed as tools for long-term social learning.

Description: Body area network (BAN) is an emerging branch of wireless sensor networks for personalized applications in many fields, such as health monitoring. The services in BAN usually have a high requirement on security, especially for the medical diagnosis, which involves private information. With limitations of power and computation capabilities, one of the main challenges to ensure security in BAN is how to generate or distribute a shared key between nodes for lightweight symmetric cryptography. The current research almost exploits the randomness and distinctiveness (characteristics) of physiological signals to solve the key generation problem. However, it needs the help of additional hardware support and has the constraint on positions deployment, to acquire vital signals, which will bring the high cost and hardness to implementation of real system. To avoid the above problems, this paper presents a novel key generation scheme and a key distribution protocol, both of which are only based on wireless modules equipped on sensors. By exploiting the high correlation of received signal strength index (RSSI) between peer-to-peer communications, our scheme can provide a shared symmetric cryptographic key under the presence of an eavesdropper. We conduct experiments on the real Telosb nodes, and the results demonstrate that our proposed methods have a good performance on security.

Description: Upscaling of evapotranspiration fluxes from instantaneous to daytime scales for thermal remote sensing applications Hydrology and Earth System Sciences Discussions, 10, 7325-7350, 2013 Author(s): C. Cammalleri, M. C. Anderson, and W. P. Kustas Four upscaling methods for estimating daytime evapotranspiration (ET) from single time-of-day snapshots, as commonly retrieved using remote sensing, were compared. These methods are based on the assumption of self-preservation of the ratio between ET and a given reference variable over the daytime hours. The analysis was performed using eddy covariance data collected at 12 AmeriFlux towers, sampling a fairly wide range in climatic and land cover conditions. The choice of energy budget closure method significantly impacted performance using different scaling methodologies. Therefore, a statistical evaluation approach was adopted to better account for the inherent uncertainty in ET fluxes using eddy covariance technique. Overall, this approach suggests that at-surface solar radiation is the most robust reference variable amongst those tested, due to high accuracy of upscaled fluxes and absence of systematic biases. Top-of-atmosphere irradiance was also tested and proved to be reliable under near clear-sky conditions, but tended to overestimate the observed daytime ET during cloudy days. Use of reference ET as a scaling flux did not perform as well as the solar radiation method, but similarly had errors with little seasonal dependency. Finally, the commonly-used evaporative fraction method yielded satisfactory results only in summer months, July and August, and tended to underestimate the observations in the fall/winter seasons from November to January at the flux sites studied.

Description: Errors in climate model daily precipitation and temperature output: time invariance and implications for bias correction Hydrology and Earth System Sciences, 17, 2147-2159, 2013 Author(s): E. P. Maurer, T. Das, and D. R. Cayan When correcting for biases in general circulation model (GCM) output, for example when statistically downscaling for regional and local impacts studies, a common assumption is that the GCM biases can be characterized by comparing model simulations and observations for a historical period. We demonstrate some complications in this assumption, with GCM biases varying between mean and extreme values and for different sets of historical years. Daily precipitation and maximum and minimum temperature from late 20th century simulations by four GCMs over the United States were compared to gridded observations. Using random years from the historical record we select a "base" set and a 10 yr independent "projected" set. We compare differences in biases between these sets at median and extreme percentiles. On average a base set with as few as 4 randomly-selected years is often adequate to characterize the biases in daily GCM precipitation and temperature, at both median and extreme values; 12 yr provided higher confidence that bias correction would be successful. This suggests that some of the GCM bias is time invariant. When characterizing bias with a set of consecutive years, the set must be long enough to accommodate regional low frequency variability, since the bias also exhibits this variability. Newer climate models included in the Intergovernmental Panel on Climate Change fifth assessment will allow extending this study for a longer observational period and to finer scales.

Description: Characterization of groundwater dynamics in landslides in varved clays Hydrology and Earth System Sciences, 17, 2171-2183, 2013 Author(s): J. E. van der Spek, T. A. Bogaard, and M. Bakker Groundwater dynamics may play a significant role in landslides. A detailed model is developed of the groundwater dynamics in landslides in varved clays in the Trièves area in the French Alps. The varved clays consist of a sequence of alternating silt and clay layers, covered by a colluvium layer and intersected by fissures. The hydraulic conductivity of the clay layers is negligible compared to the silt layers. It is conceptualized that fissures form a hydraulic connection between the colluvium and the varved clays. Groundwater recharge flows through the colluvium into the fissures, where water is exchanged horizontally between the fissure and the silt layers of the varved clays. Groundwater flow in the colluvium is simulated with the Boussinesq equation, while flow in the silt layers of the varved clays is simulated with the Richards equation. Longitudinal outflow from the fissure is simulated with a linear-reservoir model. Scattered data of relatively short monitoring periods is available for several landslides in the region. A good similarity between observed and simulated heads is obtained, especially when considering the lack of important physical parameters such as the fissure width and the distance between the monitoring point and the fissure. A simulation for the period 1959–2004 showed some correlation between peaks in the simulated heads and the recorded occurrence of landslides, while the bottom of the varved clays remained saturated during the entire simulation period.

Description: The physical basis for gas transport through polar firn: a case study at Summit, Greenland The Cryosphere Discussions, 7, 2455-2487, 2013 Author(s): A. C. Adolph and M. R. Albert Compared to other natural porous materials, relatively little is known about the physical nature of polar firn. This intricate network of ice and pore space that comprises the top 60–100 m of the polar ice sheets is the framework that forms the natural archive of past climate information. Despite the many implications for ice core interpretation, direct measurements of physical properties throughout the firn column are limited. Models of gas transport through firn are used to interpret in-situ chemical data which is retrieved to analyze past atmospheric composition. These traditional models treat the firn as a "black box," with gas transport parameters tuned to match gas concentrations with depth to known atmospheric histories. Though this method has been largely successful and provided very useful insights, there are still many questions and uncertainties to be addressed. This work seeks to understand the impact of firn structure on gas transport in firn from a first principles standpoint through direct measurements of permeability, gas diffusivity and microstructure. The relationships between gas transport properties and microstructure will be characterized and compared to existing relationships for general porous media. Direct measurements of gas diffusivity are compared to diffusivities deduced from models based on firn air chemical sampling. Our comparison illuminates the primary importance of including microstructural parameters, beyond just porosity or density, in mass transport modeling, and it provides insights about the nature of gas transport throughout the firn column. Guidance is provided for development of next-generation firn air transport models.

Description: Message delivery in a mobile social network (MSN) is difficult due to the fact that the topology of such network is sparse and unstable. Various routing schemes for MSNs were proposed to make the message delivery robust and efficient. However, little research has been conducted to explore how much delay has to be tolerated for the message delivery from the source to the destination. Since the social relationships among nodes are stable during a certain period of time, it is expected that the delay of message delivery in MSNs could be modeled with a probability model. In this paper, we take the first step to address this issue. We firstly extract three routing models from the existing routing schemes for MSNs and then develop the probability models of the message transmission delay for each abstract routing model. The simulation results show that the theoretical models match very well the simulation trace statistics.

Description: This study used natural dyes as sensitizers of dye-sensitized solar cells (DSSCs) to replace expensive chemical synthetic dyes. We prepared two natural dyes, chlorophyll dye and anthocyanin dye, by extracting them from wormwood and purple cabbage, respectively. Moreover, we mixed the prepared chlorophyll dye and anthocyanin dye at 5 different volume ratios to form cocktail dyes. For preparation of photoelectrode, P25 TiO2 nanoparticles were used to prepare paste, which was coated on fluorine-doped tin oxide (FTO) conductive glass by the spin coating method at different spin coating speeds in order to form TiO2 thin films with different thicknesses. The DSSC prepared by the cocktail dye achieves photoelectric conversion efficiency (η) of 1.95%, open-circuit voltage () of 0.765 V, and short-circuit current density () of 5.83 mA/cm2. Moreover, the prepared DSSC sensitized solely by chlorophyll extract of wormwood achieved a photoelectric conversion efficiency (η) of 0.9%, whereas the DSSC sensitized solely by anthocyanin extract of purple cabbage achieved a photoelectric conversion efficiency of 1.47%, achieving the longest lifetime of electrons amongst these three dyes.

Description: Assessing the hydrological effect of the check dams in the Loess Plateau, China, by model simulations Hydrology and Earth System Sciences, 17, 2185-2193, 2013 Author(s): Y. D. Xu, B. J. Fu, and C. S. He Check dams are commonly used for soil conservation. In the Loess Plateau of China, check dams have been widely constructed as the principal means to retain floodwater and intercept soil sediments since the 1970s. For instance, there are more than 6572 check dams in the Yanhe watershed with an area of 7725 km 2 in the Loess Plateau. However, little research has been done to quantify the hydrological effects of the check dams. In this research, the SWAT model (Soil and Water Assessment Tool) was applied to simulate the runoff and sediment in the Yanhe watershed. We treated the 1950s to 1960s as the reference period since there were very few check dams during the period. The model was firstly calibrated and validated in the reference period. The calibrated model was then used in the later periods to simulate the hydrological effects of the check dams. The results showed that the check dams had a regulation effect on runoff and a retention effect on sediment. From 1984 to 1987, the runoff in rainy season (from May to October) decreased by 1.54 m 3 s −1 (14.7%) to 3.13 m 3 s −1 (25.9%) due to the check dams; while in dry season (from November to the following April), runoff increased by 1.46 m 3 s −1 (60.5%) to 1.95 m 3 s −1 (101.2%); the sediment in rainy season decreased by 2.49 × 10 6 ton (34.6%) to 4.35 × 10 6 ton (48.0%). From 2006 to 2008, the runoff in rainy season decreased by 0.79 m 3 s −1 (15.5%) to 1.75 m 3 s −1 (28.9%), and the runoff in dry season increased by 0.51 m 3 s −1 (20.1%) to 0.97 m 3 s −1 (46.4%); the sediment in rainy season decreased by 2.03 × 10 6 ton (79.4%) to 3.12 × 10 6 ton (85.5%). Construction of the large number of check dams in the Loess Plateau has enhanced the region's capacity to control the runoff and sediment. In the Yanhe watershed, the annual runoff was reduced by less than 14.3% due to the check dams; and the sediment in rainy season was blocked by up to 85.5%. Thus, check dams are effective measures for soil erosion control in the Loess Plateau.

Description: Global isoscapes for δ 18 O and δ 2 H in precipitation: improved prediction using regionalized climatic regression models Hydrology and Earth System Sciences Discussions, 10, 7351-7393, 2013 Author(s): S. Terzer, L. I. Wassenaar, L. J. Araguás-Araguás, and P. K. Aggarwal A Regionalized Climatic Water Isotope Prediction (RCWIP) approach, based on the Global Network for Isotopes in Precipitation (GNIP), was demonstrated for the purposes of predicting point- and large-scale spatiotemporal patterns of the stable isotope compositions of water (δ 2 H, δ 18 O) in precipitation around the world. Unlike earlier global domain and fixed regressor models, RCWIP pre-defined thirty-six climatic cluster domains, and tested all model combinations from an array of climatic and spatial regressor variables to obtain the best predictive approach to each cluster domain, as indicated by RMSE and variogram analysis. Fuzzy membership fractions were thereafter used as the weights to seamlessly amalgamate results of the optimized climatic zone prediction models into a single predictive mapping product, such as global or regional amount-weighted mean annual, mean monthly or growing-season δ 18 O/δ 2 H in precipitation. Comparative tests revealed the RCWIP approach outperformed classical global-fixed regression-interpolation based models more than 67% of the time, and significantly improved upon predictive accuracy and precision. All RCWIP isotope mapping products are available as gridded GeoTIFF files from the IAEA website ( www.iaea.org/water ) and are for use in hydrology, climatology, food authenticity, ecology, and forensics.

Description: Polysaccharides account for more than 90% of the content of fungal cell walls, but the mechanism underlying the formation of the architecture of the cell walls, which consist of microfibrils embedded in an amorphous wall matrix, remains unknown. We used electron microscopy to investigate ten different fungal cell-wall polysaccharides to determine whether they could self-assemble into the fibrillar or amorphous component of fungal cell walls in a test tube without enzymes. The ultrastructures formed by precipitating β-1,3-glucan and β-1,6-glucan are different depending on the existence of branching in the molecule. Linear β-1,3-glucan and linear β-1,6-glucan precipitate into a fibrillar ultrastructure. Branched β-1,6-glucan, mannan and glycogen precipitates are amorphous. Branched β-1,3-glucan forms a fibrillar plus amorphous ultrastructure. Self-assembly among combinations of different linear and branched cell-wall polysaccharides results in an ultrastructure that resembles that of a yeast cell wall, which suggests that self-assembly of polysaccharides may participate in the development of the three-dimensional architecture of the yeast cell wall.

Description: Stakeholders' issues for action during the warning process and the interpretation of forecasts' uncertainties Natural Hazards and Earth System Science, 13, 1469-1479, 2013 Author(s): L. Créton-Cazanave and C. Lutoff This article considers the socio-geographical approach carried out as part of the MedUp program. It presents a study of the ways that the French "actors" manage forecast uncertainties during a flash flood warning process. In order to better understand the role of forecasts' uncertainties in decision making, we focused on the actions people took and how what they say explains their actions. The practices of actors involved in warnings for the Vidourle watershed (Gard, France), in particular, are analyzed using a practice-based approach. A set of categories of the "actors" was developed based on their descriptions of the problems they faced during the flash flood warning, independent of their socio-professional status and position in the warning chain. Five actor profiles result from this: Translators, Managers, Committed, Navigators and Vulnerable. For each profile, specific action contexts are defined, determining how each deals with uncertainty.

Description: Augmenting Austrian flood management practices through geospatial predictive analytics: a study in Carinthia Natural Hazards and Earth System Science, 13, 1445-1455, 2013 Author(s): S. M. Ward and G. Paulus The Danube River basin has long been the location of significant flooding problems across central Europe. The last decade has seen a sharp increase in the frequency, duration and intensity of these flood events, unveiling a dire need for enhanced flood management policy and tools in the region. Located in the southern portion of Austria, the state of Carinthia has experienced a significant volume of intense flood impacts over the last decade. Although the Austrian government has acknowledged these issues, their remedial actions have been primarily structural to date. Continued focus on controlling the natural environment through infrastructure while disregarding the need to consider alternative forms of assessing flood exposure will only act as a provisional solution to this inescapable risk. In an attempt to remedy this flaw, this paper highlights the application of geospatial predictive analytics and spatial recovery index as a proxy for community resilience, as well as the cultural challenges associated with the application of foreign models within an Austrian environment.

Description: Water displacement by sewer infrastructure in the Grote Nete catchment, Belgium, and its hydrological regime effects Hydrology and Earth System Sciences Discussions, 10, 7425-7467, 2013 Author(s): D. Vrebos, T. Vansteenkiste, J. Staes, P. Willems, and P. Meire Urbanization and especially impervious areas, in combination with wastewater treatment infrastructure, can exert several pressures on the hydrological cycle. These pressures were studied for the Grote Nete catchment in Belgium (8.18% impervious area and 3.89% effective impervious area), based on a combination of empirical and model-based approaches. The effective impervious area, combined with the extent of the wastewater collection regions which do not coincide with the natural catchment boundaries, was used as an indicator for the urbanization pressure. Our study revealed changes in the total upstream areas of the subcatchments between −16% and +3%, and in upstream impervious areas between −99% and +64%. These changes lead to important inter-catchment water transfers. Based on simulations with a physically-based and spatially-distributed hydrological catchment model, profound impacts of effective impervious area on infiltration and runoff were found. The model results show that the changes in impervious areas and related water displacements in and between catchments due to the installation of the wastewater treatment infrastructure severely impacted low flows, peak flows and seasonal trends. They moreover show that it is difficult, but of utmost importance, to incorporate these pressures and artificial processes in an accurate way during the development of hydrological models for urbanized catchments.

Description: Data aggregation techniques have been proposed for wireless sensor networks (WSNs) to address the problems presented by the limited resources of sensor nodes. The provision of efficient data aggregation to preserve data privacy is a challenging issue in WSNs. Some existing data aggregation methods for preserving data privacy are CPDA, SMART, the Twin-Key based method, and GP2S. These methods, however, have two limitations. First, the communication cost for network construction is considerably high. Second, they do not support data integrity. There are two methods for supporting data integrity, iCPDA and iPDA. But they have high communication cost due to additional integrity checking messages. To resolve this problem, we propose a novel Hilbert-curve based data aggregation scheme that enforces data privacy and data integrity for WSNs. To minimize communication cost, we utilize a tree-based network structure for constructing networks and aggregating data. To preserve data privacy, we make use of both a seed exchange algorithm and Hilbert-curve based data encryption. To support data integrity, we use an integrity checking algorithm based on the PIR technique by directly communicating between parent and child nodes. Finally, through a performance analysis, we show that our scheme outperforms the existing methods in terms of both energy efficiency and privacy preservation.

Description: Recent changes in spring snowmelt timing in the Yukon River basin detected by passive microwave satellite data The Cryosphere, 7, 905-916, 2013 Author(s): K. A. Semmens and J. M. Ramage Spring melt is a significant feature of high latitude snowmelt dominated drainage basins influencing hydrological and ecological processes such as snowmelt runoff and green-up. Melt duration, defined as the transition period from snowmelt onset until the end of the melt refreeze, is characterized by high diurnal amplitude variations (DAV) where the snowpack is melting during the day and refreezing at night, after which the snowpack melts constantly until depletion. Determining trends for this critical period is necessary for understanding how the Arctic is changing with rising temperatures and provides a baseline from which to assess future change. To study this dynamic period, brightness temperature ( T b ) data from the Special Sensor Microwave Imager (SSM/I) 37 V-GHz frequency from 1988 to 2010 were used to assess snowmelt timing trends for the Yukon River basin, Alaska/Canada. Annual T b and DAV for 1434 Equal-Area Scalable Earth (EASE)-Grid pixels (25 km resolution) were processed to determine melt onset and melt refreeze dates from T b and DAV thresholds previously established in the region. Temporal and spatial trends in the timing of melt onset and melt refreeze, and the duration of melt were analyzed for the 13 sub-basins of the Yukon River basin with three different time interval approaches. Results show a lengthening of the melt period for the majority of the sub-basins with a significant trend toward later end of melt refreeze after which the snowpack melts day and night leading to snow clearance, peak discharge, and green-up. Earlier melt onset trends were also found in the higher elevations and northernmost sub-basins (Porcupine, Chandalar, and Koyukuk rivers). Latitude and elevation displayed the dominant controls on melt timing variability and spring solar flux was highly correlated with melt timing in middle (∼600–1600 m) elevations.

Description: Solving Richards Equation for snow improves snowpack meltwater runoff estimations The Cryosphere Discussions, 7, 2373-2412, 2013 Author(s): N. Wever, C. Fierz, C. Mitterer, H. Hirashima, and M. Lehning The runoff from the snow cover during spring snow melt or rain-on-snow events is an important factor in the hydrological cycle. In this study, water transport schemes for a 1-dimensional physical based snowpack model are compared to 14 yr of lysimeter measurements at a high alpine site. The schemes include a simple bucket-type approach, an approximation of Richards Equation (RE), and the full RE. The results show that daily sums of runoff are strongly related to a positive energy balance of the snow cover and therefore, all water transport schemes show very similar performance in terms of Nash–Sutcliffe efficiency (NSE) coefficients (around 0.59) and r 2 values (around 0.77). Timing of the arrival of meltwater in spring at the bottom of the snowpack showed differences between the schemes, where especially in the bucket-type and approximated RE approach, meltwater release is slower than in the measurements. Overall, solving RE for the snow cover yields the best agreement between modelled and measured runoff. On sub-daily time scales, the water transport schemes behave very differently. Also here, solving RE provides the highest agreement between modelled and measured runoff in terms of NSE coefficient (0.48), where other water transport schemes loose any predictive power. This appears to be mainly due to bad timing of meltwater release during the day. Accordingly, solving RE for the snow cover improves several aspects of modelling snow cover runoff. The additional computational cost was found to be in the order of a factor of 1.5.

Description: An upper-bound estimate for the accuracy of volume-area scaling The Cryosphere Discussions, 7, 2293-2331, 2013 Author(s): D. Farinotti and M. Huss Volume-area scaling is the most popular method for estimating the ice volume of large glacier samples. Here, a series of resampling experiments based on different sets of synthetic data are presented in order to derive an upper-bound estimate (i.e. a level achieved only with ideal conditions) for the accuracy of its application. We also quantify the maximum accuracy expected when scaling is used for determining the glacier volume change, and area change of a given glacier population. A comprehensive set of measured glacier areas, volumes, area and volume changes is evaluated to investigate the impact of real-world data quality on the so assessed accuracies. For populations larger than a few thousand glaciers, the total ice volume can be recovered within 30% if all measurements available worldwide are used for estimating the scaling coefficients. Assuming no systematic biases in ice volume measurements, their uncertainty is of secondary importance. Knowing the individual areas of a glacier sample for two points in time allows recovering the corresponding ice volume change within 40% for populations larger than a few hundred glaciers, both for steady-state and transient geometries. If ice volume changes can be estimated without bias, glacier area changes derived from volume-area scaling show similar uncertainties as for the volume changes. This paper does not aim at making a final judgement about the suitability of volume-area scaling, but provides the means for assessing the accuracy expected from its application.

Description: Evaluation of the snow regime in dynamic vegetation land surface models using field measurements The Cryosphere Discussions, 7, 2333-2372, 2013 Author(s): E. Kantzas, M. Lomas, S. Quegan, and E. Zakharova An increasing number of studies have demonstrated the significant climatic and ecological changes occurring in the northern latitudes over the past decades. As coupled, earth-system models attempt to describe and simulate the dynamics and complex feedbacks of the Arctic environment, it is important to reduce their uncertainties in short-term predictions by improving the description of both the systems processes and its initial state. This study focuses on snow-related variables and extensively utilizes a historical data set (1966–1996) of field snow measurements acquired across the extend of the Former Soviet Union (FSU) to evaluate a range of simulated snow metrics produced by a variety of land surface models, most of them embedded in IPCC-standard climate models. We reveal model-specific issues in simulating snow dynamics such as magnitude and timings of SWE as well as evolution of snow density. We further employ the field snow measurements alongside novel and model-independent methodologies to extract for the first time (i) a fresh snow density value (57–117 kg m –3 ) for the region and (ii) mean monthly snowpack sublimation estimates across a grassland-dominated western (November–February) [9.2, 6.1, 9.15, 15.25] mm and forested eastern sub-sector (November–March) [1.53, 1.52, 3.05, 3.80, 12.20] mm; we subsequently use the retrieved values to assess relevant model outputs. The discussion session consists of two parts. The first describes a sensitivity study where field data of snow depth and snow density are forced directly into the surface heat exchange formulation of a land surface model to evaluate how inaccuracies in simulating snow metrics affect important modeled variables and carbon fluxes such as soil temperature, thaw depth and soil carbon decomposition. The second part showcases how the field data can be assimilated with ready-available optimization techniques to pinpoint model issues and improve their performance.

Description: Virtual water trade and development in Africa Hydrology and Earth System Sciences Discussions, 10, 7291-7324, 2013 Author(s): M. Konar and K. Caylor A debate has long existed on the relationships between human population, natural resources, and development. Recent research has expanded this debate to include the impacts of trade; specifically, virtual water trade, or the water footprint of traded commodities. We conduct an empirical analysis of the relationships between virtual water trade, population, and development in Africa. We find that increases in virtual water imports do not lead to increases in population growth nor do they diminish human welfare. We establish a new index of virtual water trade openness and show that levels of undernourishment tend to fall with increased values of virtual water trade openness. Countries with small dam storage capacity obtain a higher fraction of their agricultural water requirements from external sources, which may indicate implicit "infrastructure sharing" across nations. Globally, increased crop exports tends to correlate with increased crop water use efficiency, though this relationship does not hold for Africa. However, internal African trade is much more efficient in terms of embodied water resources than any other region in the world. Thus, internal African trade patterns may be compensating for poor internal production systems.

Description: A new generation of multipurpose measurement equipment is transforming the role of computers in instrumentation. The new features involve mixed devices, such as kinds of sensors, analog-to-digital and digital-to-analog converters, and digital signal processing techniques, that are able to substitute typical discrete instruments like multimeters and analyzers. Signal-processing applications frequently use least-squares (LS) sine-fitting algorithms. Periodic signals may be interpreted as a sum of sine waves with multiple frequencies: the Fourier series. This paper describes a new sine fitting algorithm that is able to fit a multiharmonic acquired periodic signal. By means of a “sinusoidal wave” whose amplitude and phase are both transient, the “triangular wave” can be reconstructed on the basis of Hilbert-Huang transform (HHT). This method can be used to test effective number of bits (ENOBs) of analog-to-digital converter (ADC), avoiding the trouble of selecting initial value of the parameters and working out the nonlinear equations. The simulation results show that the algorithm is precise and efficient. In the case of enough sampling points, even under the circumstances of low-resolution signal with the harmonic distortion existing, the root mean square (RMS) error between the sampling data of original “triangular wave” and the corresponding points of fitting “sinusoidal wave” is marvelously small. That maybe means, under the circumstances of any periodic signal, that ENOBs of high-resolution ADC can be tested accurately.

Description: An effective design procedure, based on the Elliot synthesis method, is proposed to investigate the properties of waveguide slot arrays with multilayer dielectric cover. Then, the features of the designed arrays are analyzed by means of a FEM commercial software, namely, Ansys HFSS 13. We show how a proper choice of the dielectric cover configuration allows increasing the array gain and aperture efficiency, while taking advantage of the properties of the radome structure, in terms of insulation, protection, and pressurization of the radiating waveguides. Therefore, a significant outcome of the optimal choice of the multilayer dielectric cover is the reduction of the number of slots with respect to an array radiating into free space with the same gain and efficiency, with a consequent reduction of the production cost.

Description: When considering drug delivery, the amount of drug that can be carried at a particular time and how the drug is incorporated efficiently into cells are important parameters. Transferrin (Tf)-conjugated nanocarriers have been used for the targeted delivery of drugs to cancer cells due to the availability of receptor-mediated clathrin-dependent endocytosis. In general, however, endocytosis seems to differ according to the size and shape of carriers. Large substances are generally internalized into cells by phagocytosis. We studied the internalization mechanism of Tf-conjugated nanoparticles (diameter, 522 nm). Tf-conjugated polystyrene particles were incorporated into cells by receptor-mediated endocytosis with large clathrin-coated vesicles even though their diameter was 〉500 nm and despite that fact that clathrin-coated vesicles have a diameter of 100 nm. This finding suggests that signals for internalization generated by stimulated Tf receptors (TfRs) activate clathrin-mediated endocytosis preferentially. Whether these larger particles could deliver drugs more efficiently than smaller particles was then examined. The toxicity of larger Tf-conjugated biodegradable nanoparticles (poly(lactic-co-glycolic acid)) encapsulating doxorubicin (diameter, 216 ± 38 nm) was appreciably dependent on the number of Tf molecules conjugated on a particle and the number of TfRs expressed on the cell membrane. Larger Tf-conjugated particles delivered drugs to cancer cells expressing many TfRs more selectively than their smaller counterparts (diameter, 56 ± 9 nm) if they were decorated with an appropriate number of Tf molecules.

Description: Structural biology relies on good-quality protein crystals in order for structure determination. Many factors affect the growth process of a protein crystal including the way it nucleates and the types of damage and contamination during its growth. Although the nucleation process and quality of a crystal is vital to structure determination, they are both under-studied areas of research. Our research begins to explore ways of measuring the quality of protein crystals, using TEM, thus overcoming the problems associated with viewing wet specimens in a vacuum. Our current understanding of nucleation is that it is a two-step mechanism involving the formation of nuclei from dense liquid clusters; however; it is still unclear whether nuclei first start as amorphous aggregates or as crystalline lattices. Potentially, electron diffraction may be capable of uncovering this process. Using TEM imaging and diffraction of lysozyme as a model protein crystal, we report the internal two-dimensional strain and the density of crystallites in a protein crystal, at a resolution never seen before. The TEM diffraction shows unique features of crystal mosaicity that can be directly correlated to TEM images.

Description: Seasonal controls on snow distribution and aerial ablation at the snow-patch and landscape scales, McMurdo Dry Valleys, Antarctica The Cryosphere, 7, 917-931, 2013 Author(s): J. W. Eveland, M. N. Gooseff, D. J. Lampkin, J. E. Barrett, and C. D. Takacs-Vesbach Accumulated snow in the McMurdo Dry Valleys, while limited, has great ecological significance to subnivian soil environments. Though sublimation dominates the ablation process in this region, measurable increases in soil moisture and insulation from temperature extremes provide more favorable conditions with respect to subnivian soil communities. While precipitation is not substantial, significant amounts of snow can accumulate, via wind transport, in topographic lees along the valley bottoms, forming thousands of discontinuous snow patches. These patches have the potential to act as significant sources of local meltwater, controlling biogeochemical cycling and the landscape distribution of microbial communities. Therefore, determining the spatial and temporal dynamics of snow at multiple scales is imperative to understanding the broader ecological role of snow in this region. High-resolution satellite imagery acquired during the 2009–2010 and 2010–2011 austral summers was used to quantify the distribution of snow across Taylor and Wright valleys. Extracted snow-covered area from the imagery was used as the basis for assessing inter-annual variability and seasonal controls on accumulation and ablation of snow at multiple scales. In addition to landscape analyses, fifteen 1 km 2 plots (3 in each of 5 study regions) were selected to assess the prevalence of snow cover at finer spatial scales, referred to herein as the snow-patch scale. Results confirm that snow patches tend to form in the same locations each year with some minor deviations observed. At the snow-patch scale, neighboring patches often exhibit considerable differences in aerial ablation rates, and particular snow patches do not reflect trends for snow-covered area observed at the landscape scale. These differences are presumably related to microtopographic influences acting on individual snow patches, such as wind sheltering and differences in snow depth due to the underlying topography. This highlights the importance of both the landscape and snow-patch scales in assessing the effects of snow cover on biogeochemical cycling and microbial communities.

Description: An interdisciplinary swat ecohydrological model to define catchment-scale hydrologic partitioning Hydrology and Earth System Sciences Discussions, 10, 7235-7290, 2013 Author(s): C. L. Shope, G. R. Maharjan, J. Tenhunen, B. Seo, K. Kim, J. Riley, S. Arnhold, T. Koellner, Y. S. Ok, S. Peiffer, B. Kim, J.-H. Park, and B. Huwe Land use and climate change have long been implicated in modifying ecosystem services, such as water quality and water yield, biodiversity, and agricultural production. To account for future effects on ecosystem services, the integration of physical, biological, economic, and social data over several scales must be implemented to assess the effects on natural resource availability and use. Our objective is to assess the capability of the SWAT model to capture short-duration monsoonal rainfall-runoff processes in complex mountainous terrain under rapid, event-driven processes in a monsoonal environment. To accomplish this, we developed a unique quality-control gap-filling algorithm for interpolation of high frequency meteorological data. We used a novel multi-location, multi-optimization calibration technique to improve estimations of catchment-wide hydrologic partitioning. We calibrated the interdisciplinary model to a combination of statistical, hydrologic, and plant growth metrics. In addition, we used multiple locations of different drainage area, aspect, elevation, and geologic substrata distributed throughout the catchment. Results indicate scale-dependent sensitivity of hydrologic partitioning and substantial influence of engineered features. While our model accurately reproduced observed discharge variability, the addition of hydrologic and plant growth objective functions identified the importance of culverts in catchment-wide flow distribution. The results of this study provide a valuable resource to describe landscape controls and their implication on discharge, sediment transport, and nutrient loading. This study also shows the challenges of applying the SWAT model to complex terrain and extreme environments. By incorporating anthropogenic features into modeling scenarios, we can greatly enhance our understanding of the hydroecological impacts on ecosystem services.

Description: Wireless sensor networks (WSNs) are subject to various attacks because of the vulnerable environment, limited recourse, and open communication channel. To protect WSNs, in this paper, we present a Secret sharing-based key management (SSKM). SSKM utilizes the advantages of hierarchical architecture and adopts two-level key management and authentication mechanism, which can efficiently protect the allover network communication security and survivability. Different from previous works, the SSKM distributes keys based on secret sharing mechanism by the clustered architecture, which not only localizes the key things but also keeps scalability. The SSKM provides various session keys, the network key for base station (BS) and cluster heads (CHs); the cluster key between the cluster head and member nodes. The SSKM dynamically generates different keys based on different polynomials from BS in different periods which can protect the network from the compromised nodes and reduce the high probability of the common keys. The security analysis shows that the SSKM can prevent several attacks effectively and reduce the energy consumption.

Description: Determining spatial variability of dry spells: a Markov-based method, applied to the Makanya catchment, Tanzania Hydrology and Earth System Sciences, 17, 2161-2170, 2013 Author(s): B. M. C. Fischer, M. L. Mul, and H. H. G. Savenije With a growing world population and a trend towards more resource-intensive diets, pressure on land and water resources for food production will continue to increase in the coming decades. Large parts of the world rely on rainfed agriculture for their food security. In Africa, 90% of the food production is from rainfed agriculture, generally with low yields and a high risk of crop failure. One of the main reasons for crop failure is the occurrence of dry spells during the growing season. Key indicators are the critical dry spell duration and the probability of dry spell occurrence. In this paper a new Markov-based framework is presented to spatially map the length of dry spells for fixed probabilities of non-exceedance. The framework makes use of spatially varying Markov coefficients that are correlated to readily available spatial information such as elevation and distance to the sea. The dry spell map thus obtained is compared to the spatially variable critical dry spell duration, based on soil properties and crop water requirements, to assess the probability of crop failure in different locations. The results show that in the Makanya catchment the length of dry spell occurrence is highly variable in space, even over relatively short distances. In certain areas the probability of crop failure reaches levels that make rainfed agricultural unsustainable, even close to areas where currently rainfed agriculture is successfully being practised. This method can be used to identify regions that are vulnerable to dry spells and, subsequently, to develop strategies for supplementary irrigation or rainwater harvesting.

Description: Spatial debris-cover effect on the maritime glaciers of Mount Gongga, south-eastern Tibetan Plateau The Cryosphere Discussions, 7, 2413-2453, 2013 Author(s): Y. Zhang, Y. Hirabayashi, K. Fujita, S. Liu, and Q. Liu The Tibetan Plateau and surroundings contain a large number of debris-covered glaciers, on which debris cover affects glacier response to climate change by altering ice melting rates and spatial patterns of mass loss. Insufficient spatial distribution of debris thickness data makes it difficult to analyze regional debris-cover effects. Mount Gongga glaciers, maritime glaciers in the south-eastern Tibetan Plateau, are characterized by a substantial reduction in glacier length and ice mass in recent decades. Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER)-derived thermal property of the debris layer reveals that 68% of the glaciers have extensive mantles of supraglacial debris in their ablation zones, in which the proportion of debris cover to total glacier area varies from 1.74% to 53.0%. Using a surface energy-mass balance model accounting for the debris-cover effect applied at a regional scale, we find that although the presence of supraglacial debris has a significant insulating effect on heavily debris-covered glaciers, it accelerates ice melting on ~ 10.2% of the total ablation area and produces rapid wastage of ~ 25% of the debris-covered glaciers, resulting in the similar mass losses between debris-covered and debris-free glaciers. Widespread debris cover also facilitates the development of active terminus regions. Regional differences in the debris-cover effect are apparent, highlighting the importance of debris cover for understanding glacier status and hydrology in both the Tibetan Plateau and other mountain ranges around the world.

Description: EPCglobal network is used to share product data between trading partners, which was proposed by EPCglobal. Object Name Service (ONS) in EPCglobal framework raises two critical security risks: the authenticity of IP addresses for Physical Markup Language (PML) servers and the privacy of Electronic Product Codes (EPCs). Existing work considers either the IP address authentication or the EPC privacy. In addition, that work mainly relies on cryptographic tools, in which key distribution is not a trivial task and also causes a large amount of computation overhead. In this paper, we make the first attempt to solve those two security risks together without relying cryptography. We propose a scheme, namely, APP (authenticate ONS and protect EPC privacy), to guarantee the authenticity of IP addresses for PML servers as well as EPC privacy and to maintain ultralightweight computation cost. Moreover, we give formal definition of the authenticity and the privacy in ONS context. The security achievements are strictly analyzed and proved. The extensive analysis results justify the applicability of the proposed scheme.

Description: Wireless Sensor Network (WSN) has proved its presence in various real time applications and hence the security of such embedded devices is a vital issue. Certificateless cryptography is one of the recent paradigms to provide security. Certificateless public key cryptography (CL-PKC) deals effectively with the twin issues of certificate management in traditional public key cryptography and key escrow problem in identity-based cryptography. CL-PKC has attracted special attention in the field of information security as it has opened new avenues for improvement in the present security architecture. Recently, Tsai et al. proposed an improved certificateless signature scheme without pairing and claimed that their new construction is secure against different kinds of attacks. In this paper, we present a security analysis of their scheme and our results show that scheme does not have resistance against malicious-KGC attack. In addition, we have found some security flaws in the certificateless signature scheme of Fan et al. and proved the scheme vulnerable to Strong Type I attack.

Description: Decadal changes from a multi-temporal glacier inventory of Svalbard The Cryosphere Discussions, 7, 2489-2532, 2013 Author(s): C. Nuth, J. Kohler, M. König, A. von Deschwanden, J. O. Hagen, A. Kääb, G. Moholdt, and R. Pettersson We present a multi-temporal digital inventory of Svalbard glaciers with the most recent from the late 2000s containing 33 775 km 2 of glaciers, or 57% of the total land area of the archipelago. At present, 68% of the glaciated area of Svalbard drains through tidewater glaciers that have a summed terminus width of ~ 740 km. The glaciated area over the entire archipelago has decreased by an average of 80 km 2 a −1 over the past ~ 30 yr, representing a reduction of 7%. For a sample of ~ 400 glaciers (10 000 km 2 ) in the south and west of Spitsbergen, three digital inventories are available from 1930/60s, 1990 and 2007 from which we calculate average changes during 2 epochs. In the more recent epoch, the terminus retreat was larger than in the earlier epoch while area shrinkage was smaller. The contrasting pattern may be explained by the decreased lateral wastage of the glacier tongues. Temporal retreat rates for individual glaciers show a mix of accelerating and decelerating trends, reflecting the large spatial variability of glacier types and climatic/dynamic response times in Svalbard. Last, retreat rates estimated by dividing glacier area changes by the tongue width are larger than centerline retreat due to a more encompassing frontal change estimate with inclusion of lateral area loss.

Description: The cotyledon of legume seeds is a storage organ that provides nutrients for seed germination and seedling growth. The spatial and temporal control of the degradation processes within cotyledons has not been elucidated. Calcium oxalate (CaOx) crystals, a common calcium deposit in plants, have often been reported to be present in legume seeds. In this study, micro-computed tomography (micro-CT) was employed at the SPring-8 facility to examine the three-dimensional distribution of crystals inside cotyledons during seed maturation and germination of Lotus miyakojimae (previously Lotus japonicus accession Miyakojima MG-20). Using this technique, we could detect the outline of the embryo, void spaces in seeds and the cotyledon venation pattern. We found several sites that strongly inhibited X-ray transmission within the cotyledons. Light and polarizing microscopy confirmed that these areas corresponded to CaOx crystals. Three-dimensional observations of dry seeds indicated that the CaOx crystals in the L. miyakojimae cotyledons were distributed along lateral veins; however, their distribution was limited to the abaxial side of the procambium. The CaOx crystals appeared at stage II (seed-filling stage) of seed development, and their number increased in dry seeds. The number of crystals in cotyledons was high during germination, suggesting that CaOx crystals are not degraded for their calcium supply. Evidence for the conservation of CaOx crystals in cotyledons during the L. miyakojimae germination process was also supported by the biochemical measurement of oxalic acid levels.

Description: The electron irradiation damage of MFI-type zeolite was estimated under various accelerating voltages of 100, 200 and 300 kV from successively captured high-resolution transmission electron microscopy (HRTEM) images. To determine the optimal accelerating voltage for HRTEM imaging of electron-sensitive MFI zeolite, the critical dose was estimated from the disappearance of a specific fast Fourier transform spot calculated from experimental images. Based only on the electron dose, a higher voltage was more advantageous. However, taking into account the minimum dose for imaging with a CCD camera, the optimal accelerating voltage for imaging MFI zeolite was 200 kV. The minimum dose for image detection with a CCD camera was surmised from the output/input signal ratio dependence on the accelerating voltage and the contrast range in simulated HRTEM images.

Description: The magnetic field generated by a magnetic recording head is evaluated using electron holography. A magnetic recording head, which is connected to an electric current source, is set on the specimen holder of a transmission electron microscope. Reconstructed phase images of the region around the magnetic pole show the change in the magnetic field distribution corresponding to the electric current applied to the coil of the head. A simulation of the magnetic field, which is conducted using the finite element method, reveals good agreement with the experimental observations.

Description: A new multilayer-coated varied line-spaced grating, JS4000, was fabricated and tested for extending the upper limit of a grating X-ray spectrometer for electron microscopy. This grating was designed for 2–3.8 keV at a grazing incidence angle of 1.35°. It was revealed that this new multilayer structure enables us to take soft-X-ray emission spectra continuously from 1.5 to 4.3 keV at the same optical setting. The full-width at half maximum of Te-L α1,2 (3.8 keV) emission peak was 27 eV. This spectrometer was applied to indium tin oxide particles and clearly resolved Sn-L α (3444 eV) and In-L β1 (3487 eV) peaks, which could not be resolved by a widely used energy-dispersive X-ray spectrometer.

Description: Next generation wireless communication networks intend to take advantage of the integration of terrestrial and aerospace infrastructures. Besides, multiple-input multiple-output (MIMO) architecture is the key technology, which has brought the wireless gigabit vision closer to reality. In this direction, high-altitude platforms (HAPs) could act as relay stations in the stratosphere transferring information from an uplink to a downlink MIMO channel. This paper investigates the performance of a novel transmission scheme for the delivery of mobile-to-mobile (M-to-M) services via a stratospheric relay. It is assumed that the source, relay, and destination nodes are equipped with multiple antennas and that amplify-and-forward (AF) relaying is adopted. The performance is analyzed through rigorous simulations in terms of the bit-error rate (BER) by using a recently proposed 3D geometry-based reference model in spatially correlated flat-fading MIMO channels, employing a hierarchical broadcast technique and minimum mean square error (MMSE) receivers.

Description: A printed reconfigurable ultra-wideband (UWB) monopole antenna with triple narrow band-notched characteristics is proposed for cognitive radio applications in this paper. The triple narrow band-notched frequencies are obtained using a defected microstrip structure (DMS) band stop filter (BSF) embedded in the microstrip feed line and an inverted π-shaped slot etched in the rectangular radiation patch, respectively. Reconfigurable characteristics of the proposed cognitive radio antenna (CRA) are achieved by means of four ideal switches integrated on the DMS-BSF and the inverted π-shaped slot. The proposed UWB CRA can work at eight modes by controlling switches ON and OFF. Moreover, impedance bandwidth, design procedures, and radiation patterns are presented for analysis and explanation of this antenna. The designed antenna operates over the frequency band between 3.1 GHz and 14 GHz (bandwidth of 127.5%), with three notched bands from 4.2 GHz to 6.2 GHz (38.5%), 6.6 GHz to 7.0 GHz (6%), and 12.2 GHz to 14 GHz (13.7%). The antenna is successfully simulated, fabricated, and measured. The results show that it has wide impedance bandwidth, multimodes characteristics, stable gain, and omnidirectional radiation patterns.

Description: This paper presents the design, simulation, fabrication, and measurement of a circular spiral microstrip antenna embedded in distilled water bolus. The antenna is mainly designed to operate at 434 MHz ISM band to be used for a hyperthermia applicator. The performance of the antenna is compared to a conventional patch antenna also embedded in water bolus. The results show that spiral antenna has significant narrower radiation pattern and is capable to operate at multiple frequencies as well. Narrow beam of the antenna is desired to design a multiantenna arrangement with less coupling and a better focusing resolution which can be crucial for deep regional hyperthermia applications. The option of other frequencies is desirable to have a better control over the penetration depth versus focusing depending on the application region.

Description: This paper addresses the energy efficiency of cooperative communication in WSN. We first establish the energy model of single-hop WSN. It is found that the cooperative communication is more suitable for harsh transmission environment with long-haul distance. The energy consumption per bit is numerically minimized by finding the optimal broadcasting BER and the number of cooperative nodes. Then, we expand the conclusion to the multihop scenario where “energy hole” dominates the longevity of WSN. To mitigate the energy consumption in the hotspots, as well as to keep the promised reliability, we adjust the transmission BER of the clusters according to the hops between the sink and cluster. On one hand, the statistical reliability is met. On the other hand, the energy consumed is converted from the nearer cluster (from the sink) to the farther ones. The network lifetime is thus optimized.

Description: Technical note: Method of Morris effectively reduces the computational demands of global sensitivity analysis for distributed watershed models Hydrology and Earth System Sciences Discussions, 10, 4275-4299, 2013 Author(s): J. D. Herman, J. B. Kollat, P. M. Reed, and T. Wagener The increase in spatially distributed hydrologic modeling warrants a corresponding increase in diagnostic methods capable of analyzing complex models with large numbers of parameters. Sobol ' sensitivity analysis has proven to be a valuable tool for diagnostic analyses of hydrologic models. However, for many spatially distributed models, the Sobol ' method requires a prohibitive number of model evaluations to reliably decompose output variance across the full set of parameters. We investigate the potential of the method of Morris, a screening-based sensitivity approach, to provide results sufficiently similar to those of the Sobol ' method at a greatly reduced computational expense. The methods are benchmarked on the Hydrology Laboratory Research Distributed Hydrologic Model (HL-RDHM) model over a six-month period in the Blue River Watershed, Oklahoma, USA. The Sobol ' method required over six million model evaluations to ensure reliable sensitivity indices, corresponding to more than 30 000 computing hours and roughly 180 gigabytes of storage space. We find that the method of Morris is able to correctly identify sensitive and insensitive parameters with 300 times fewer model evaluations, requiring only 100 computing hours and 1 gigabyte of storage space. Method of Morris proves to be a promising diagnostic approach for global sensitivity analysis of highly parameterized, spatially distributed hydrologic models.

Description: Estimating actual, potential, reference crop and pan evaporation using standard meteorological data: a pragmatic synthesis Hydrology and Earth System Sciences, 17, 1331-1363, 2013 Author(s): T. A. McMahon, M. C. Peel, L. Lowe, R. Srikanthan, and T. R. McVicar This guide to estimating daily and monthly actual, potential, reference crop and pan evaporation covers topics that are of interest to researchers, consulting hydrologists and practicing engineers. Topics include estimating actual evaporation from deep lakes and from farm dams and for catchment water balance studies, estimating potential evaporation as input to rainfall-runoff models, and reference crop evapotranspiration for small irrigation areas, and for irrigation within large irrigation districts. Inspiration for this guide arose in response to the authors' experiences in reviewing research papers and consulting reports where estimation of the actual evaporation component in catchment and water balance studies was often inadequately handled. Practical guides using consistent terminology that cover both theory and practice are not readily available. Here we provide such a guide, which is divided into three parts. The first part provides background theory and an outline of the conceptual models of potential evaporation of Penman, Penman–Monteith and Priestley–Taylor, as well as discussions of reference crop evapotranspiration and Class-A pan evaporation. The last two sub-sections in this first part include techniques to estimate actual evaporation from (i) open-surface water and (ii) landscapes and catchments (Morton and the advection-aridity models). The second part addresses topics confronting a practicing hydrologist, e.g. estimating actual evaporation for deep lakes, shallow lakes and farm dams, lakes covered with vegetation, catchments, irrigation areas and bare soil. The third part addresses six related issues: (i) automatic (hard wired) calculation of evaporation estimates in commercial weather stations, (ii) evaporation estimates without wind data, (iii) at-site meteorological data, (iv) dealing with evaporation in a climate change environment, (v) 24 h versus day-light hour estimation of meteorological variables, and (vi) uncertainty in evaporation estimates. This paper is supported by a Supplement that includes 21 sections enhancing the material in the text, worked examples of many procedures discussed in the paper, a program listing (Fortran 90) of Morton's WREVAP evaporation models along with tables of monthly Class-A pan coefficients for 68 locations across Australia and other information.

Description: For development of advanced materials, characterization using a scanning transmission electron microscope (STEM) including analysis via X-ray energy-dispersive spectrometry and electron energy-loss spectrometry is essential. Recent advances in aberration-corrected instruments have offered large-scale data acquisition at a high resolution for limited acquisition times both in imaging and in analysis. Further advanced procedures are required to analyze such large-scale datasets more efficiently including quantification. In addition, more simplified tuning procedures are crucial to the best possible resolution in the latest aberration-corrected instruments. In this review article, several approaches to perform advanced electron microscopy, which the author has been developing with his colleague, are described as ‘Microscopy Hacks’. These are (i) quantification and elemental/chemical-imaging procedures, (ii) advanced statistical approaches to handle large-scale datasets and (iii) instrument characterization and tuning procedures including the latest development of an ad hoc autotuning procedure for aberration-corrected STEM imaging.

Description: The crystal structure of a new type of molybdenum oxide crystal encapsulated in a single-walled carbon nanotube (CNT) was examined via diffraction and spectroscopic techniques using both X-rays and electron beams. This new type of molybdenum oxide crystal has a chemical bonding state of MoO 3 , as confirmed by X-ray absorption spectroscopy, and the MoO 3 units exhibit axial symmetry, as clarified by electron diffraction from bundled and individual CNTs encapsulating the crystal. To obtain three-dimensional information on the structure, a cross-sectional sample was prepared using a conventional dimple and ion-mill method. High-resolution transmission electron microscopy images exhibit ring-like shapes that originated from the arrangement of the MoO 3 units inside the CNTs, as observed along the tube axis. The units are spaced 0.36 nm from each other in a ring arrangement and the distance between each ring is 0.391 nm.

Description: This review summarizes the recent advances in three-dimensional (3D) imaging techniques and their application to polymer nanostructures, for example, microphase-separated structures of block copolymers. We place particular emphasis on the method of transmission electron microtomography (electron tomography for short; hereafter abbreviated as ET). As a result of recent developments in ET, truly quantitative 3D images of polymer nanostructures can now be obtained with subnanometer resolution. The introduction of scanning optics in ET has made it possible to obtain large amounts of 3D data from micrometer-thick polymer specimens by using conventional electron microscopes at a relatively low accelerating voltage, 200 kV. Thus, ET covers structures over a wide range of thicknesses, from a few nanometers to several hundred nanometers, which corresponds to quite an important spatial range for hierarchical polymer nanostructures. ET provides clear 3D images and a wide range of new structural information that cannot be obtained using other methods. Information traditionally derived from conventional microscopy or scattering methods can be directly acquired from 3D volume data. ET is a versatile technique that is not restricted to only polymer applications; it can also be used as a powerful characterization tool in energy applications such as fuel cells.

Description: The performances of a newly developed 80–200 kV cold field emission gun (CFEG) transmission electron microscope (TEM) integrating a spherical aberration corrector for a TEM image-forming lens have been evaluated. To begin, we show that the stability of both emission and probe currents makes use of this new CFEG much friendlier. The energy spread of electrons emitted from the CFEG has been measured as a function of emission current and shows a very last 0.26 eV energy resolution at 200 kV and even 0.23 eV at 80 kV. The combination of the CFEG and the CEOS™ aberration corrector, associated with enhanced mechanical and electrical stabilities of this new microscope, allows reaching an information transfer below 75 pm at 200 and 80 pm at 80 kV. This unseen resolution at 200 kV has allowed us to study the structure of CoPt nanoparticles by observing direct images of their atomic arrangement along the high indexes zone axis. We have evidenced the presence of defects in these nanostructures that are not parallel to the electron beam. The precise stoichiometry of two iron oxides, FeO and Fe 2 O 3 , has been determined from an analysis of iron valence state that was obtained from a direct analysis of EELS fine structures spectrum of the two oxides.

Description: Data mining from noisy data/images is one of the most important themes in modern science and technology. Statistical image processing is a promising technique for analysing such data. Automation of particle pickup from noisy electron micrographs is essential, especially when improvement of the resolution of single particle analysis requires a huge number of particle images. For such a purpose, reference-based matching using primary three-dimensional (3D) model projections is mainly adopted. In the matching, however, the highest peaks of the correlation may not accurately indicate particles when the image is very noisy. In contrast, the density and the heights of the peaks should reflect the probability distribution of the particles. To statistically determine the particle positions from the peak distributions, we have developed a density-based peak search followed by a peak selection based on average peak height, using multi-reference alignment (MRA). Its extension, using multi-reference multiple alignment (MRMA), was found to enable particle pickup at higher accuracy even from extremely noisy images with a signal-to-noise ratio of 0.001. We refer to these new methods as stochastic pickup with MRA (MRA-StoPICK) or with MRMA (MRMA-StoPICK). MRMA-StoPICK has a higher pickup accuracy and furthermore, is almost independent of parameter settings. They were successfully applied to cryo-electron micrographs of Rice dwarf virus. Because current computational resources and parallel data processing environments allow somewhat CPU-intensive MRA-StoPICK and MRMA-StoPICK to be performed in a short period, these methods are expected to allow high-resolution analysis of the 3D structure of particles.

Description: The sensory nerve endings of the rat tongue, cheek and palate were studied using immunohistochemical staining and transmission electron microscopy analysis. The specimens were fixed in modified Karnovsky solution and embedded in Spurr resin. Substance P, calcitonin gene-related peptide (CGRP)- and protein gene product 9.5 (PGP b9.5)-containing nerve fibers in the rat tongue, cheek and palate were examined by electronic microscopical analysis and immunohistochemical localization. These fibers run very close to the basal lamina of the epithelium and extend into the filliform and fungiform papillae. Numerous plexiform fibers immunoreactive for substance P, CGRP and PGP 9.5 were found in the connective tissue of mucosa. Electron microscopic observations showed clearly immunostained nerve fibers, which are located very close to the basal lamina of epithelial cells. Some electron-dense granules may be observed in the axoplasms of both substance P and CGRP immunoreactive fibers. Several lamellar corpuscles into the subepithelial connective tissue papillae, Merkel corpuscles and numerous thin unmyelinated and myelinated axons were observed. The terminal axons revealed numerous mitochondria, neurofilaments, microtubules and clear vesicles in the base of axoplasmic protrusions. The lamellar cells showed caveolae and interlamelar spaces filled by amorphous substance. Between the lamellar cells and axoplasmic membrane, and in the adjacent lamellae region, desmosome-type junctions were observed. The quantitative and morphometric analysis showed nerve endings with an average area of 4.83 ± 3.4 μm 2 and 19.4 internal mitochondria in this site and the organized corpuscles with an average area of 79.24 ± 27.24 μm 2 and 24.23 internal mitochondria in this place. All the structures observed are involved in the transmission of pain and mechanoreceptors stimulus of these oral mucosae.

Description: Body sensor networks (BSNs) carry heterogeneous traffic types having diverse QoS requirements, such as delay, reliability and throughput. In this paper, we design a priority-based traffic load adaptive medium access control (MAC) protocol for BSNs, namely, PLA-MAC, which addresses the aforementioned requirements and maintains efficiency in power consumption. In PLA-MAC, we classify sensed data packets according to their QoS requirements and accordingly calculate their priorities. The transmission schedules of the packets are determined based on their priorities. Also, the superframe structure of the proposed protocol varies depending on the amount of traffic load and thereby ensures minimal power consumption. Our performance evaluation shows that the PLA-MAC achieves significant improvements over the state-of-the-art protocols.

Description: In this work, the nanostructured anatase mesoporous membranes were prepared for water ultrafiltration (UF) process with photocatalytic and physical separation capabilities. A macroporous substrate was synthesized from α-Al2O3, then a colloidal titania sol was used for the preparation of the intermediate layer. Also, the membrane top layer was synthesized by deposition and calcination of titania polymeric sol on the intermediate layer. The characterization was performed by DLS, TG-DTA, XRD, BET, FESEM, TEM, and AFM techniques. Also, the filtration experiments were carried out based on separation of methyl orange from aqueous solution by a membrane setup with a dead-end filtration cell. Photocatalytic activity of the membranes was evaluated by methyl orange photodegradation using UV-visible spectrophotometer. The mean particle size of the colloidal and polymeric sols was 14 and 1.5 nm, respectively. The anatase membranes exhibited homogeneity, with the surface area of 32.8 m2/g, the mean pore size of 8.17 nm, and the crystallite size of 9.6 nm. The methyl orange removal efficiency by the mesoporous membrane based on physical separation was determined to be 52% that was improved up to 83% by a coupling photocatalytic technique. Thus, the UF membrane showed a high potential due to its multifunctional capability for water purification applications.

Description: Wireless sensor network (WSN) experiment platforms are used for teaching, research, and development of WSN. However, existing WSN experiment platforms generally have the following disadvantages: tedious manual operations, invasive measurement method, poor sensor self-awareness, and low resource utilization rate. To address the above problems, this paper proposes OPCPP, an online Plug-Configure-Play experiment platform for WSN. It has four prominent strongpoints: in-application programming in batch, noninvasive measurement method, sensor self-awareness, and remote operation. OPCPP has been used in eight colleges in China for teaching course of “internet of things” till now. We also develop a sensor-aware ZigBee-based smart home system prototype based on OPCPP.

Description: The effect of black carbon on reflectance of snow in the accumulation area of glaciers in the Baspa basin, Himachal Pradesh, India The Cryosphere Discussions, 7, 1359-1382, 2013 Author(s): A. V. Kulkarni, G. Vinay Kumar, H. S. Negi, J. Srinivasan, and S. K. Satheesh Himalayan glaciers are being extensively debated in scientific and public forums, as changes in their distribution can significantly affect the availability of water in many rivers originating in the region. The distribution of glaciers can be influenced by mass balance, and most of the glaciers located in the Pir Panjal and Greater Himalayan mountain ranges are losing mass at the rate of almost a meter per year. The Equilibrium Line Altitude (ELA) has also shifted upward by 400 m in the last two decades. This upward migration of ELA and the loss in mass could have been influenced by changes in temperature, precipitation and by the deposition of black carbon in the accumulation area of glaciers. The deposition of black carbon can reduce the albedo of snow in the accumulation area leading to faster melting of snow and causing more negative mass balance. In this investigation, a change in reflectance in the accumulation area of the Baspa basin is analysed for the year 2009, as the region has experienced extensive forest fires along with northern Indian biomass burning. The investigation has shown that: (1) The number of forest fires in the summer of 2009 was substantially higher than in any other year between 2001 and 2010; (2) the drop in reflectance in the visible region from April to May in the accumulation area was significantly higher in the year 2009 than in any other year from 2000 to 2012; (3) the temperature of the region was substantially lower than the freezing point during the active fire period of 2009, indicating the small influence of liquid water and grain size; (4) the drop in reflectance was observed only in the visible region, indicating role of contamination; (5) in the visible region, a mean drop in reflectance of 21± 5% was observed during the active fire period in the accumulation area. At some places, the drop was as high as 50 ± 5%. This can only be explained by the deposition of black carbon. The study suggests that a change in snow albedo in the accumulation area due to the deposition of black carbon from anthropogenic and natural causes can influence the mass balance of the glaciers in the Baspa basin, Himachal Pradesh, India.

Description: We propose a middleware platform built on wireless USB (WUSB) over wireless body area networks (WBAN) hierarchical protocol for wearable health-monitoring systems (WHMS). The proposed middleware platform is composed of time-synchronization and localization solutions. It is executed on the basis of WUSB over WBAN protocol at each wearable sensor node comprising the WHMS. In the platform, firstly, the time-synchronization middleware is executed. After that, a WHMS host calculates the location of a receiving sensor node by using the difference between the times at which the sensor node received different WBAN beacon frames sent from the WHMS host. The WHMS host interprets the status and motion of the wearable body-sensor objects.

Description: Socio-hydrology: conceptualising human-flood interactions Hydrology and Earth System Sciences Discussions, 10, 4515-4536, 2013 Author(s): G. Di Baldassarre, A. Viglione, G. Carr, L. Kuil, J. L. Salinas, and G. Blöschl Over history, humankind has tended to settle near streams because of the role of rivers as transportation corridors and the fertility of riparian areas. However, human settlements in floodplains have been threatened by the risk of flooding. Possible responses have been to resettle away and/or modify the river system by building flood control structures. This has led to a complex web of interactions and feedback mechanisms between hydrological and social processes in settled floodplains. This paper is an attempt to conceptualise these interplays for hypothetical human-flood systems. We develop a simple, dynamic model to represent the interactions and feedback loops between hydrological and social processes. The model is then used to explore the dynamics of the human-flood system and the effect of changing individual characteristics, including external forcing such as technological development. The results show that the conceptual model is able to reproduce reciprocal effects between floods and people as well as the emergence of typical patterns. For instance, when levees are built or raised to protect floodplain areas, their presence not only reduces the frequency of flooding, but also exacerbates high water levels. Then, because of this exacerbation, higher flood protection levels are required by the society. As a result, more and more flooding events are avoided, but rare and catastrophic events take place.

Description: CDRD and PNPR satellite passive microwave precipitation retrieval algorithms: EuroTRMM/EURAINSAT origins and H-SAF operations Natural Hazards and Earth System Science, 13, 887-912, 2013 Author(s): A. Mugnai, E. A. Smith, G. J. Tripoli, B. Bizzarri, D. Casella, S. Dietrich, F. Di Paola, G. Panegrossi, and P. Sanò Satellite Application Facility on Support to Operational Hydrology and Water Management (H-SAF) is a EUMETSAT (European Organisation for the Exploitation of Meteorological Satellites) program, designed to deliver satellite products of hydrological interest (precipitation, soil moisture and snow parameters) over the European and Mediterranean region to research and operations users worldwide. Six satellite precipitation algorithms and concomitant precipitation products are the responsibility of various agencies in Italy. Two of these algorithms have been designed for maximum accuracy by restricting their inputs to measurements from conical and cross-track scanning passive microwave (PMW) radiometers mounted on various low Earth orbiting satellites. They have been developed at the Italian National Research Council/Institute of Atmospheric Sciences and Climate in Rome (CNR/ISAC-Rome), and are providing operational retrievals of surface rain rate and its phase properties. Each of these algorithms is physically based, however, the first of these, referred to as the Cloud Dynamics and Radiation Database (CDRD) algorithm, uses a Bayesian-based solution solver, while the second, referred to as the PMW Neural-net Precipitation Retrieval (PNPR) algorithm, uses a neural network-based solution solver. Herein we first provide an overview of the two initial EU research and applications programs that motivated their initial development, EuroTRMM and EURAINSAT (European Satellite Rainfall Analysis and Monitoring at the Geostationary Scale), and the current H-SAF program that provides the framework for their operational use and continued development. We stress the relevance of the CDRD and PNPR algorithms and their precipitation products in helping secure the goals of H-SAF's scientific and operations agenda, the former helpful as a secondary calibration reference to other algorithms in H-SAF's complete mix of algorithms. Descriptions of the algorithms' designs are provided including a few examples of their performance. This aspect of the development of the two algorithms is placed in the context of what we refer to as the TRMM era, which is the era denoting the active and ongoing period of the Tropical Rainfall Measuring Mission (TRMM) that helped inspire their original development. In 2015, the ISAC-Rome precipitation algorithms will undergo a transformation beginning with the upcoming Global Precipitation Measurement (GPM) mission, particularly the GPM Core Satellite technologies. A few years afterward, the first pair of imaging and sounding Meteosat Third Generation (MTG) satellites will be launched, providing additional technological advances. Various of the opportunities presented by the GPM Core and MTG satellites for improving the current CDRD and PNPR precipitation retrieval algorithms, as well as extending their product capability, are discussed.

Description: Integration of remote sensing, RUSLE and GIS to model potential soil loss and sediment yield (SY) Hydrology and Earth System Sciences Discussions, 10, 4567-4596, 2013 Author(s): H. Kamaludin, T. Lihan, Z. Ali Rahman, M. A. Mustapha, W. M. R. Idris, and S. A. Rahim Land use activities within a basin serve as one of the contributing factors which cause deterioration of river water quality through its potential effect on erosion. Sediment yield in the form of suspended solid in the river water body which is transported to the coastal area occurs as a sign of lowering of the water quality. Hence, the aim of this study was to determine potential soil loss using the Revised Universal Soil Loss Equation (RUSLE) model and the sediment yield, in the Geographical Information Systems (GIS) environment within selected sub-catchments of Pahang River Basin. RUSLE was used to estimate potential soil losses and sediment yield by utilizing information on rainfall erosivity ( R ) using interpolation of rainfall data, soil erodibility ( K ) using field measurement and soil map, vegetation cover ( C ) using satellite images, topography (LS) using DEM and conservation practices ( P ) using satellite images. The results indicated that the rate of potential soil loss in these sub-catchments ranged from very low to extremely high. The area covered by very low to low potential soil loss was about 99%, whereas moderate to extremely high soil loss potential covered only about 1% of the study area. Sediment yield represented only 1% of the potential soil loss. The sediment yield (SY) value in Pahang River turned out to be higher closer to the river mouth because of the topographic character, climate, vegetation type and density, and land use within the drainage basin.

Description: Probability distributions for explaining hydrological losses in South Australian catchments Hydrology and Earth System Sciences Discussions, 10, 4597-4626, 2013 Author(s): S. H. P. W. Gamage, G. A. Hewa, and S. Beecham The wide variability of hydrological losses in catchments is due to multiple variables that affect the rainfall-runoff process. Accurate estimation of hydrological losses is required for making vital decisions in design applications that are based on design rainfall models and rainfall-runoff models. Using representative single values of losses, despite their wide variability, is common practice, especially in Australian studies. This practice leads to issues such as over or under estimation of design floods. Probability distributions can be used as a better representation of losses. In particular, using joint probability approaches (JPA), probability distributions can be incorporated into hydrological loss parameters in design models. However, lack of understanding of loss distributions limits the benefit of using JPA. The aim of this paper is to identify a probability distribution function that can successfully describe hydrological losses in South Australian (SA) catchments. This paper describes suitable parametric and non-parametric distributions that can successfully describe observed loss data. The goodness-of-fit of the fitted distributions and quantification of the errors associated with quantile estimation are also discussed a two-parameter Gamma distribution was identified as one that successfully described initial loss (IL) data of the selected catchments. Also, a non-parametric standardised distribution of losses that describes both IL and continuing loss (CL) data were identified. The results obtained for the non-parametric methods were compared with similar studies carried out in other parts of Australia and a remarkable degree of consistency was observed. The results will be helpful in improving design flood applications.