ALBERT

Description: In the present work, the performance of carbon nanotubes (c-CNTs) functionalized polydimethylsiloxane (PDMS) based coatings as extractive phases for in-tube solid phase microextraction (IT-SPME) coupled to Capillary LC (CapLC) has been evaluated. Carboxylic-single walled carbon nanotubes (c-SWNTs) and carboxylic-multi walled carbon nanotubes (c-MWNTs) have been immobilized on the activated surface of PDMS capillary columns. The effect of different percentages of diphenyl groups in the PDMS extractive phase has also been evaluated. The extraction capability of the capillary columns has been tested for different organic pollutants, nitrogen heterocyclic compounds and polycyclic aromatic compounds (PAHs). The results indicated that the use of the c-CNTs-PDMS capillary columns improve pyriproxyfen and mainly PAH extraction. Triazines were better extracted by unmodified TRB-35 and modified c-CNTs-PDMSTRB-5. The results showed that the extraction capability of the c-CNT capillary columns depends not only on the polarity of the analytes (as it occurs with PDMS columns) but also on the interactions that the analytes can establish with the immobilized c-CNTs on the PDMS columns. The extraction efficiency has been evaluated on the basis of the preconcentration rate that can be achieved, and, in this sense, the best c-CNTs-PDMS capillary column for each group of compounds can be proposed.

Description: A deformed exponential family is a generalization of exponential families. Since the useful classes of power law tailed distributions are described by the deformed exponential families, they are important objects in the theory of complex systems. Though the deformed exponential families are defined by deformed exponential functions, these functions do not satisfy the law of exponents in general. The deformed algebras have been introduced based on the deformed exponential functions. In this paper, after summarizing such deformed algebraic structures, it is clarified how deformed algebras work on deformed exponential families. In fact, deformed algebras cause generalization of expectations. The three kinds of expectations for random variables are introduced in this paper, and it is discussed why these generalized expectations are natural from the viewpoint of information geometry. In addition, deformed algebras cause generalization of independences. Whereas it is difficult to check the well-definedness of deformed independence in general, the κ-independence is always well-defined on κ-exponential families. This is one of advantages of κ-exponential families in complex systems. Consequently, we can well generalize the maximum likelihood method for the κ-exponential family from the viewpoint of information geometry.

Description: We consider the problem of learning a Bayesian network structure given n examples and the prior probability based on maximizing the posterior probability. We propose an algorithm that runs in O(n log n) time and that addresses continuous variables and discrete variables without assuming any class of distribution. We prove that the decision is strongly consistent, i.e., correct with probability one as n ! 1. To date, consistency has only been obtained for discrete variables for this class of problem, and many authors have attempted to prove consistency when continuous variables are present. Furthermore, we prove that the “log n” term that appears in the penalty term of the description length can be replaced by 2(1+ε) log log n to obtain strong consistency, where ε > 0 is arbitrary, which implies that the Hannan–Quinn proposition holds.

Description: Background: In 2012, a pilot health policy of contractual service relations between general practitioners and patients was implemented in China. Due to the decline in body and cognitive function, as well as the lack of family care and narrow social support networks, the demand of health services among the elderly is much higher than that among the general population. This study aims to probe into the empty nesters’ willingness-to-pay for general practitioners using a contractual service policy, investigating empty nesters’ payment levels for the service, and analyze the main factors affecting the willingness of empty-nesters’ general practitioners using contractual service supply cost. Methods: This cross-sectional study adopted a multistage stratified sampling method to survey 865, city empty nesters (six communities in three districts of one city) aged 60–85 years. A condition value method was used to infer the distribution of the willingness-to-pay; Cox’s proportional hazards regression model was used to analyze the influencing factors of willingness-to-pay. Results: More than seventy percent (76.6%) of the empty nesters in this city were willing to pay general practitioners using contract service in Chongqing. The level of willingness-to-pay for the surveyed empty nesters was 34.1 yuan per year. The median value was 22.1 yuan per year, which was below the Chongqing urban and rural cooperative medical insurance individual funding level (60 yuan per year) in 2013. Cox’s proportional hazards regression model analysis showed that the higher the education level was, the worse the self-reported health status would be, accompanied by higher family per capita income, higher satisfaction of community health service, and higher willingness-to-pay empty nesters using a contract service. Women had a higher willingness-to-pay than men. Conclusions: The willingness-to-pay for general practitioners by contractual service is high among city empty nesters in Chongqing, thus, individual financing is feasible. However, people are willing to pay less than half of the current personal financing of cooperative medical insurance of urban and rural residents. Education level, family per capita income, and self-reported health status are the main factors affecting the cost sharing intention for general practitioners using contract service supply. According to the existing situation of different empty nesters, it is important to perfect the design of general practitioners using a contractual service policy system, according to differentiated personal financing levels.

Description: In order to achieve process intensification for adsorption chillers and heat pumps, a new composite material was developed based on sintered aluminum fibers from a melt-extraction process and a dense layer of silico-aluminophosphate (SAPO-34) on the fiber surfaces. The SAPO-34 layer was obtained through a partial support transformation (PST) process. Preparation of a composite sample is described and its characteristic pore size distribution and heat conductivity are presented. Water adsorption data obtained under conditions of a large pressure jump are given. In the next step, preparation of the composite was scaled up to larger samples which were fixed on a small adsorption heat exchanger. Adsorption measurements on this heat exchanger element that confirm the achieved process intensification are presented. The specific cooling power for the adsorption step per volume of composite is found to exceed 500 kW/m3 under specified conditions.

Description: An ultrasonic technique, invariant to temperature changes, for a density measurement of different liquids under in situ extreme conditions is presented. The influence of geometry and material parameters of the measurement system (transducer, waveguide, matching layer) on measurement accuracy and reliability is analyzed theoretically along with experimental results. The proposed method is based on measurement of the amplitude of the ultrasonic wave, reflected from the interface of the solid/liquid medium under investigation. In order to enhance sensitivity, the use of a quarter wavelength acoustic matching layer is proposed. Therefore, the sensitivity of the measurement system increases significantly. Density measurements quite often must be performed in extreme conditions at high temperature (up to 220 °C) and high pressure. In this case, metal waveguides between piezoelectric transducer and the measured liquid are used in order to protect the conventional transducer from the influence of high temperature and to avoid depolarization. The presented ultrasonic density measurement technique is suitable for density measurement in different materials, including liquids and polymer melts in extreme conditions. A new calibration algorithm was proposed. The metrological evaluation of the measurement method was performed. The expanded measurement uncertainty Uρ = 7.4 × 10−3 g/cm3 (1%).

Description: The relationship between soil fauna and different fertilizer management practices is of growing concern. The aim of this research was to investigate the response of soil fauna to fertilization regimes, to explore the relationships among the community of soil animals, soil moisture and crop yields. The application of organic fertilizers (i.e., sheep manure or crop residues) increased crop yields and promoted the number of individuals and species of soil fauna owing to the exogenous organic matter that fertilizers provided for the survival and development of soil fauna. Furthermore, the treatments that applied sheep manure (i.e., sheep manure only or nitrogen, phosphorus, potassium and sheep manure plus) were significantly beneficial for increasing crop yields and diversity of soil fauna compared to treatments with crop residues returned (i.e., crop residues returned only or nitrogen, phosphorus, potassium and crop residues returned to the field) (p 〈 0.05) due to the response of soil fauna to diverse exogenous nutrients and the effect of soil fertility. Therefore, the finding that soil fauna abundance is significantly positively correlated with soil moisture and crop yield may mean the effects of fertilizer applications on soil animals were partly masked by the soil moisture and crop yield.

Description: In recent years, IoT (Internet of Things) technologies have seen great advances, particularly, the IPv6 Routing Protocol for Low-power and Lossy Networks (RPL), which provides a powerful and flexible routing framework that can be applied in a variety of application scenarios. In this context, as an important role of IoT, Wireless Sensor Networks (WSNs) can utilize RPL to design efficient routing protocols for a specific application to increase the ubiquity of networks with resource-constrained WSN nodes that are low-cost and easy to deploy. In this article, our work starts with the description of Agricultural Low-power and Lossy Networks (A-LLNs) complying with the LLN framework, and to clarify the requirements of this application-oriented routing solution. After a brief review of existing optimization techniques for RPL, our contribution is dedicated to a Scalable Context-Aware Objective Function (SCAOF) that can adapt RPL to the environmental monitoring of A-LLNs, through combining energy-aware, reliability-aware, robustness-aware and resource-aware contexts according to the composite routing metrics approach. The correct behavior of this enhanced RPL version (RPAL) was verified by performance evaluations on both simulation and field tests. The obtained experimental results confirm that SCAOF can deliver the desired advantages on network lifetime extension, and high reliability and efficiency in different simulation scenarios and hardware testbeds.

Description: The aim of this randomized clinical trial was to evaluate whether a recently described multi-sensor approach called BIONOTE® is accurate enough to verify the efficacy of treatment of patients with halitosis. A treatment with Lactobacillus brevis (CD2)–containing lozenges, compared with placebo was tested. The BIONOTE® was compared with traditional techniques used to detect halitosis: OralChroma™ and two calibrated odor judges enrolled for the organoleptic assessments. Twenty patients (10 treated and 10 placebo), suffering from active phase halitosis were included in the study. Treatment consisted of Lactobacillus brevis (CD2)—containing lozenges or placebo, 4 tablets/day for 14 days. t0 was before the beginning of the study; t1 was day 7 and t2 was day 14. The effectiveness of treatment was assessed through: (1) Rosenberg score; (2) Winkel tongue coating index (WTCI) anterior and posterior; (2) OralChroma™; (3) the new developed multi-sensor approach, called BIONOTE® (test technique). Only the WTCI anterior revealed statistically significant changes between t0 and t2 data (p = 0.014) in the treated group. Except for the WTCI anterior, all diagnostic methods revealed the lack of effectiveness for halitosis of a 14-days treatment with Lactobacillus brevis (CD2)–containing lozenges. The BIONOTE® multisensor system seems accurate in addition to OralChroma™ to assess the initial condition of halitosis and its mitigation during treatment.

Description: This paper presents a multipurpose and low cost sensor for the simultaneous monitoring of temperature and ullage of wine in barrels in two of the most important stages of winemaking, that being fermentation and maturation. The distributed sensor subsystem is imbedded within the bung of the barrel and runs on battery for a period of at least 12 months and costs around $27 AUD for all parts. In addition, software was designed which allows for the remote transmission and easy visual interpretation of the data for the winemaker. Early warning signals can be sent when the temperature or ullage deviates from a winemakers expectations so remedial action can be taken, such as when topping is required or the movement of the barrels to a cooler cellar location. Such knowledge of a wine’s properties or storage conditions allows for a more precise control of the final wine quality.

Description: This paper provides an overview of the main manufacturing technologies of displays, focusing on those with low and ultra-low levels of power consumption, which make them suitable for current societal needs. Considering the typified value obtained from the manufacturer’s specifications, four technologies—Liquid Crystal Displays, electronic paper, Organic Light-Emitting Display and Electroluminescent Displays—were selected in a first iteration. For each of them, several features, including size and brightness, were assessed in order to ascertain possible proportional relationships with the rate of consumption. To normalize the comparison between different display types, relative units such as the surface power density and the display frontal intensity efficiency were proposed. Organic light-emitting display had the best results in terms of power density for small display sizes. For larger sizes, it performs less satisfactorily than Liquid Crystal Displays in terms of energy efficiency.

Description: Model selection is an integral, yet contentious, component of epidemiologic research. Unfortunately, there remains no consensus on how to identify a single, best model among multiple candidate models. Researchers may be prone to selecting the model that best supports their a priori, preferred result; a phenomenon referred to as “wish bias”. Directed acyclic graphs (DAGs), based on background causal and substantive knowledge, are a useful tool for specifying a subset of adjustment variables to obtain a causal effect estimate. In many cases, however, a DAG will support multiple, sufficient or minimally-sufficient adjustment sets. Even though all of these may theoretically produce unbiased effect estimates they may, in practice, yield somewhat distinct values, and the need to select between these models once again makes the research enterprise vulnerable to wish bias. In this work, we suggest combining adjustment sets with model averaging techniques to obtain causal estimates based on multiple, theoretically-unbiased models. We use three techniques for averaging the results among multiple candidate models: information criteria weighting, inverse variance weighting, and bootstrapping. We illustrate these approaches with an example from the Pregnancy, Infection, and Nutrition (PIN) study. We show that each averaging technique returns similar, model averaged causal estimates. An a priori strategy of model averaging provides a means of integrating uncertainty in selection among candidate, causal models, while also avoiding the temptation to report the most attractive estimate from a suite of equally valid alternatives.

Description: The widespread, intentional and increasingly frequent chemical emplacement in the troposphere has gone unidentified and unremarked in the scientific literature for years. The author presents evidence that toxic coal combustion fly ash is the most likely aerosolized particulate sprayed by tanker-jets for geoengineering, weather-modification and climate-modification purposes and describes some of the multifold consequences on public health. Two methods are employed: (1) Comparison of 8 elements analyzed in rainwater, leached from aerosolized particulates, with corresponding elements leached into water from coal fly ash in published laboratory experiments, and (2) Comparison of 14 elements analyzed in dust collected outdoors on a high-efficiency particulate air (HEPA) filter with corresponding elements analyzed in un-leached coal fly ash material. The results show: (1) the assemblage of elements in rainwater and in the corresponding experimental leachate are essentially identical. At a 99% confidence interval, they have identical means (T-test) and identical variances (F-test); and (2) the assemblage of elements in the HEPA dust and in the corresponding average un-leached coal fly ash are likewise essentially identical. The consequences on public health are profound, including exposure to a variety of toxic heavy metals, radioactive elements, and neurologically-implicated chemically mobile aluminum released by body moisture in situ after inhalation or through transdermal induction.

Description: The impacts of climate change on human health have been documented globally and in the United States. Numerous studies project greater morbidity and mortality as a result of extreme weather events and other climate-sensitive hazards. Public health impacts on the U.S. Gulf Coast may be severe as the region is expected to experience increases in extreme temperatures, sea level rise, and possibly fewer but more intense hurricanes. Through myriad pathways, climate change is likely to make the Gulf Coast less hospitable and more dangerous for its residents, and may prompt substantial migration from and into the region. Public health impacts may be further exacerbated by the concentration of people and infrastructure, as well as the region’s coastal geography. Vulnerable populations, including the very young, elderly, and socioeconomically disadvantaged may face particularly high threats to their health and well-being. This paper provides an overview of potential public health impacts of climate variability and change on the Gulf Coast, with a focus on the region’s unique vulnerabilities, and outlines recommendations for improving the region’s ability to minimize the impacts of climate-sensitive hazards. Public health adaptation aimed at improving individual, public health system, and infrastructure resilience is urgently needed to meet the challenges climate change may pose to the Gulf Coast in the coming decades.

Description: This study forecasts the liquidity gap in China’s pension scheme for urban workers in the context of an ageing population and the possible effects of recent governmental policies by constructing a basic pension model, including “old people”, “middle people” and “new people” and a simulation method. We find, firstly, that China’s liquidity gap of pension will reach its peak of approximately 13.11 trillion yuan in 2038. Subsequently, this gap will gradually decrease with growth in the mortality rate. Secondly, reasonable intervals for the replacement and contribution rates should be set at [0.417, 0.604] and [0.189, 0.262], respectively, to sustain China’s pension system. Thirdly, compared to increasing fiscal subsidies, an income doubling plan, raising the contribution rate, lowering the replacement rate and delaying the retirement age can significantly reduce the liquidity gap, although the policy costs are relatively high. A policy permitting families to have two children will increase the rate of reduction of the liquidity gap, but it cannot effectively narrow the gap at the peak moment.

Description: Diffuse Correlation Spectroscopy (DCS) is a well-established optical technique that has been used for non-invasive measurement of blood flow in tissues. Instrumentation for DCS includes a correlation device that computes the temporal intensity autocorrelation of a coherent laser source after it has undergone diffuse scattering through a turbid medium. Typically, the signal acquisition and its autocorrelation are performed by a correlation board. These boards have dedicated hardware to acquire and compute intensity autocorrelations of rapidly varying input signal and usually are quite expensive. Here we show that a Raspberry Pi minicomputer can acquire and store a rapidly varying time-signal with high fidelity. We show that this signal collected by a Raspberry Pi device can be processed numerically to yield intensity autocorrelations well suited for DCS applications. DCS measurements made using the Raspberry Pi device were compared to those acquired using a commercial hardware autocorrelation board to investigate the stability, performance, and accuracy of the data acquired in controlled experiments. This paper represents a first step toward lowering the instrumentation cost of a DCS system and may offer the potential to make DCS become more widely used in biomedical applications.

Description: Wind tunnels are a key experimental tool for the analysis of airflow parameters in many fields of application. Despite their great potential impact on agricultural research, few contributions have dealt with the development of automatic control systems for wind tunnels in the field of greenhouse technology. The objective of this paper is to present an automatic control system that provides precision and speed of measurement, as well as efficient data processing in low-speed wind tunnel experiments for greenhouse engineering applications. The system is based on an algorithm that identifies the system model and calculates the optimum PI controller. The validation of the system was performed on a cellulose evaporative cooling pad and on insect-proof screens to assess its response to perturbations. The control system provided an accuracy of 〈0.06 m·s‾1 for airflow speed and 〈0.50 Pa for pressure drop, thus permitting the reproducibility and standardization of the tests. The proposed control system also incorporates a fully-integrated software unit that manages the tests in terms of airflow speed and pressure drop set points.

Description: A new application of utilizing ultra-wideband (UWB) technology to sense wind turbine blade deflections is introduced in this paper for wind energy cost reduction. The lower UWB band of 3.1–5.3 GHz is applied. On each blade, there will be one UWB blade deflection sensing system, which consists of two UWB antennas at the blade root and one UWB antenna at the blade tip. The detailed topology and challenges of this deflection sensing system are addressed. Due to the complexity of the problem, this paper will first realize the on-blade UWB radio link in the simplest case, where the tip antenna is situated outside (and on the surface of) a blade tip. To investigate this case, full-blade time-domain measurements are designed and conducted under different deflections. The detailed measurement setups and results are provided. If the root and tip antenna locations are properly selected, the first pulse is always of sufficient quality for accurate estimations under different deflections. The measured results reveal that the blade tip-root distance and blade deflection can be accurately estimated in the complicated and lossy wireless channels around a wind turbine blade. Some future research topics on this application are listed finally.

Description: A method for measuring shaft diameters is presented using structured light vision measurement. After calibrating a model of the structured light measurement, a virtual plane is established perpendicular to the measured shaft axis and the image of the light stripe on the shaft is projected to the virtual plane. On the virtual plane, the center of the measured shaft is determined by fitting the projected image under the geometrical constraints of the light stripe, and the shaft diameter is measured by the determined center and the projected image. Experiments evaluated the measuring accuracy of the method and the effects of some factors on the measurement are analyzed.

Description: Understanding the relationship between land use and surface water quality is necessary for effective water management. We estimated the impacts of catchment-wide land use on water quality during the dry and rainy seasons in the Dongjiang River basin, using remote sensing, geographic information systems and multivariate statistical techniques. The results showed that the 83 sites can be divided into three groups representing different land use types: forest, agriculture and urban. Water quality parameters exhibited significant variations between the urban-dominated and forest-dominated sites. The proportion of forested land was positively associated with dissolved oxygen concentration but negatively associated with water temperature, electrical conductivity, permanganate index, total phosphorus, total nitrogen, ammonia nitrogen, nitrate nitrogen and chlorophyll-a. The proportion of urban land was strongly positively associated with total nitrogen and ammonia nitrogen concentrations. Forested and urban land use had stronger impacts on water quality in the dry season than in the rainy season. However, agricultural land use did not have a significant impact on water quality. Our study indicates that urban land use was the key factor affecting water quality change, and limiting point-source waste discharge in urban areas during the dry season would be critical for improving water quality in the study area.

Description: The morphological properties of kaolin flocs were investigated in a Couette-flow experiment at the steady state under seven shear flow conditions (shear rates of 5.36, 9.17, 14, 24, 31, 41 and 53 s−1). These properties include a one-dimensional (1-D) fractal dimension (D1), a two-dimensional (2-D) fractal dimension (D2), a perimeter-based fractal dimension (Dpf) and an aspect ratio (AR). They were calculated based on the projected area (A), equivalent size, perimeter (P) and length (L) of the major axis of the floc determined through sample observation and an image analysis system. The parameter D2, which characterizes the relationship between the projected area and the length of the major axis using a power function, , increased from 1.73 ± 0.03, 1.72 ± 0.03, and 1.75 ± 0.04 in the low shear rate group (G = 5.36, 9.17, and 14 s−1) to 1.92 ± 0.03, 1.82 ± 0.02, 1.85 ± 0.02, and 1.81 ± 0.02 in the high shear rate group (24, 31, 41 and 53 s−1), respectively. The parameter D1 characterizes the relationship between the perimeter and length of the major axis by the function  and decreased from 1.52 ± 0.02, 1.48 ± 0.02, 1.55 ± 0.02, and 1.63 ± 0.02 in the low shear group (5.36, 9.17, 14 and 24 s−1) to 1.45 ± 0.02, 1.39 ± 0.02, and 1.39 ± 0.02 in the high shear group (31, 41 and 53 s−1), respectively. The results indicate that with increasing shear rates, the flocs become less elongated and that their boundary lines become tighter and more regular, caused by more breakages and possible restructurings of the flocs. The parameter Dpf, which is related to the perimeter and the projected area through the function , decreased as the shear rate increased almost linearly. The parameter AR, which is the ratio of the length of the major axis and equivalent diameter, decreased from 1.56, 1.59, 1.53 and 1.51 in the low shear rate group to 1.43, 1.47 and 1.48 in the high shear rate group. These changes in Dpf and AR show that the flocs become less convoluted and more symmetrical and that their boundaries become smoother and more regular in the high shear rate group than in the low shear rate group due to breakage and possible restructuring processes. To assess the effects of electrolyte and sediment concentration, 0.1 mol/L calcium chloride (CaCl2) and initial sediment concentration from 7.87 × 10−5 to 1.57 × 10−5 were used in this preliminary study. The addition of electrolyte and increasing sediment concentration could produce more symmetrical flocs with less convoluted and simpler boundaries. In addition, some new information on the temporal variation of the median size of the flocs during the flocculation process is presented.

Description: The Saudi Arabia (SA) climate varies greatly, depending on the geography and the season. According to K ppen and Geiger, the climates of SA is “desert climate”. The analysis of the seasonal rainfall detects that spring and winter seasons have the highestrainfall incidence, respectively. Through the summer,small quantities of precipitation are observed, while autumn received more precipitation more than summer season considering the total annual rainfall. In all seasons, the SW area receives rainfall, with a maximum in spring, whereas in the summer season, the NE and NW areas receive very little quantities of precipitation. The Rub Al-Khali (the SE region) is almost totally dry. The maximum amount of annual rainfall does not always happen at the highest elevation. Therefore, the elevation is not the only factor in rainfall distribution.A great inter-annual change in the rainfall over the SA for the period (1978–2009) is observed. In addition, in the same period, a linear decreasing trend is found in the observed rainfall, whilst in the recent past (1994–2009) a statistically significant negative trend is observed. In the Southern part of the Arabian Peninsula (AP) and along the coast of the Red Sea, it is interesting to note that rainfall increased, whilst it decreased over most areas of SA during the 2000–2009 decade, compared to 1980–1989.Statistical and numerical models are used to predict rainfall over Saudi Arabia (SA). The statistical models based on stochastic models of ARIMA and numerical models based on Providing Regional Climates for Impact Studies of Hadley Centre (PRECIS). Climate and its qualitative character and quantified range of possible future changes are investigated. The annual total rainfall decreases in most regions of the SA and only increases in the south. The summertime precipitation will be the highest between other seasons over the southern, the southwestern provinces and Asir mountains, while the wintertime rainfall will remain the lowest.The climate in the SA is instructed by the El Niño Southern Oscillation (ENSO) and other circulations such as centers of high and low pressure, the North Atlantic Oscillation (NAO) and SOI. Strength and oscillation of subtropical jet stream play a big role in pulling hot, dry air masses of SA.

Description: Accurate state of charge (SoC) estimation of batteries plays an important role in promoting the commercialization of electric vehicles. The main work to be done in accurately determining battery SoC can be summarized in three parts. (1) In view of the model-based SoC estimation flow diagram, the n-order resistance-capacitance (RC) battery model is proposed and expected to accurately simulate the battery’s major time-variable, nonlinear characteristics. Then, the mathematical equations for model parameter identification and SoC estimation of this model are constructed. (2) The Akaike information criterion is used to determine an optimal tradeoff between battery model complexity and prediction precision for the n-order RC battery model. Results from a comparative analysis show that the first-order RC battery model is thought to be the best based on the Akaike information criterion (AIC) values. (3) The real-time joint estimator for the model parameter and SoC is constructed, and the application based on two battery types indicates that the proposed SoC estimator is a closed-loop identification system where the model parameter identification and SoC estimation are corrected mutually, adaptively and simultaneously according to the observer values. The maximum SoC estimation error is less than 1% for both battery types, even against the inaccurate initial SoC.

Description: This is the second part of a study conducted to model the aerothermodynamic impact of suction parameters and gas properties on a multi-stage centrifugal compressor’s performance. A new iterative method has been developed in the first part to derive the equivalent performance at various operating conditions. This approach has been validated to predict the compressor map at different suction pressures and temperatures using the design characteristics as reference values. A further case is included in this paper in order to emphasize the validity of the developed approach to obtain the performance characteristics at various gas compositions. The provided example shows that the performance parameters at different gas mixtures can be predicted to within ±1.34%. Furthermore, the conducted optimization in this paper reveals that the proposed method can be applied for the compressor design evaluation corresponding to the expected variation in suction conditions. Moreover, the examined case study demonstrates the effect of gas properties’ variation on the operating point and aerodynamic stability of the entire compression system. In order to achieve that, a simple approach has been established to assess the contribution of gas properties’ variation to the inefficient and unstable compressor performance based on the available operational data.

Description: The in-wheel electric vehicle is expected to be a popular next-generation vehicle because an in-wheel system can simplify the powertrain and improve driving performance. In addition, it also has an advantage in that it maximizes driving efficiency through independent torque control considering the motor efficiency. However, there is an instability problem if only the driving torque is controlled in consideration of only the motor efficiency. In this paper, integrated torque distribution strategies are proposed to overcome these problems. The control algorithm consists of various strategies for optimizing driving efficiency, satisfying driver demands, and considering tire slip and vehicle cornering. Fuzzy logic is used to determine the appropriate timing of intervention for each distribution strategy. A performance simulator for in-wheel electric vehicles was developed by using MATLAB/Simulink and CarSim to validate the control strategies. From simulation results under complex driving conditions, the proposed algorithm was verified to improve both the driving stability and fuel economy of the in-wheel vehicle.

Description: The knowledge of unsteady forces is necessary when designing vertical axis wind turbines (VAWTs). Measurement data for turbines operating at an open site are still very limited. The data obtained from wind tunnels or towing tanks can be used, but have limited applicability when designing large-scale VAWTs. This study presents experimental data on the normal forces of a 12-kW straight-bladed VAWT operated at an open site north of Uppsala, Sweden. The normal forces are measured with four single-axis load cells. The data are obtained for a wide range of tip speed ratios: from 1.7 to 4.6. The behavior of the normal forces is analyzed. The presented data can be used in validations of aerodynamic models and the mechanical design for VAWTs.

Description: This paper introduces a new iterative method to predict the equivalent centrifugal compressor performance at various operating conditions. The presented theoretical analysis and empirical correlations provide a novel approach to derive the entire compressor map corresponding to various suction conditions without a prior knowledge of the detailed geometry. The efficiency model was derived to reflect the impact of physical gas properties, Mach number, and flow and work coefficients. One of the main features of the developed technique is the fact that it considers the variation in the gas properties and stage efficiency which makes it appropriate with hydrocarbons. This method has been tested to predict the performance of two multistage centrifugal compressors and the estimated characteristics are compared with the measured data. The carried comparison revealed a good matching with the actual values, including the stable operation region limits. Furthermore, an optimization study was conducted to investigate the influences of suction conditions on the stage efficiency and surge margin. Moreover, a new sort of presentation has been generated to obtain the equivalent performance characteristics for a constant discharge pressure operation at variable suction pressure and temperature working conditions. A further validation is included in part two of this study in order to evaluate the prediction capability of the derived model at various gas compositions.

Description: This paper presents an investigation of sewage sludge gasification in a fixed bed gasifier. Experiments were conducted on a laboratory scale fixed bed gasifier. In the experiments, two types of dried sewage sludge were tested and their properties were analysed. Parameters such as air ratio λ = 0.12 to 0.27, gasification agent temperature t = 50 to 250 °C and gasification agent composition ( = 0.21 and  > 0.21) were found to influence on temperature distribution, syngas Lower Heating Value (LHV) and syngas composition. The results indicate that the syngas LHV was found to decrease with increased air ratio for all analyzed cases: cold and preheated air and cold enriched air. The increase in the percentage of the main combustible components was accompanied by a decrease in the concentration of carbon dioxide. Increasing oxygen concentration increased the temperature, which tended to favor the formation of smaller molecules in the gas mixture. Thus, the enriched air medium produced a gas with a higher LHV. In contrast to conventional gasification, gasification process with gasification agent preheating causes that the flux of heat necessary to support endothermic gasification reactions is producing more effective. Air preheating causes increases hydrogen and carbon monoxide production.

Description: Aiming at the combined power quality +disturbance recognition, an automated recognition method based on wavelet packet entropy (WPE) and modified incomplete S-transform (MIST) is proposed in this paper. By combining wavelet packet Tsallis singular entropy, energy entropy and MIST, a 13-dimension vector of different power quality (PQ) disturbances including single disturbances and combined disturbances is extracted. Then, a ruled decision tree is designed to recognize the combined disturbances. The proposed method is tested and evaluated using a large number of simulated PQ disturbances and some real-life signals, which include voltage sag, swell, interruption, oscillation transient, impulsive transient, harmonics, voltage fluctuation and their combinations. In addition, the comparison of the proposed recognition approach with some existing techniques is made. The experimental results show that the proposed method can effectively recognize the single and combined PQ disturbances.

Description: For general metric theories of gravity, we compare the approach that describes/derives the field equations of gravity as a thermodynamic identity with the one which looks at them from entropy bounds. The comparison is made through the consideration of the matter entropy flux across (Rindler) horizons, studied by making use of the notion of a limiting thermodynamic scale l* of matter, previously introduced in the context of entropy bounds. In doing this: (i) a bound for the entropy of any lump of matter with a given energy-momentum tensor Tab is considered, in terms of a quantity, which is independent of the theory of gravity that we use; this quantity is the variation of the Clausius entropy of a suitable horizon when the element of matter crosses it; (ii) by making use of the equations of motion of the theory, the same quantity is then expressed as the variation of Wald’s entropy of that horizon (and this leads to a generalized form of the generalized covariant entropy bound, applicable to general diffeomorphism-invariant theories of gravity); and (iii) a notion of l* for horizons, as well as an expression for it, is given.

Description: Background and Purpose: The aim of the present study was to assess a relationship between readiness to quit and post-stroke smoking behavior. Methods: Eighty-six active smokers with first-ever ischemic stroke were recruited in a tertiary-care stroke unit. The question “Are you ready to quit smoking within the next month?” with yes/no responses and the 10-cm readiness visual analog scale (VAS) was administered during the anti-smoking intervention. Smoking status was verified at the 3- and 12-month follow-up. Results: The readiness VAS score at hospitalization was significantly lower in patients classified as smokers as compared to patients classified as non-smokers. The readiness score 〈5 cm was a significant predictor of smoking at the 3-month (OR, 7.3) and 12-month follow-up (OR, 4.9). Conclusions: The present results suggest that the readiness VAS can be used as a simple and inexpensive instrument for early identification of patients who continue to smoke after stroke.

Description: Reliable data transmission over lossy communication link is expensive due to overheads for error protection. For signals that have inherent sparse structures, compressive sensing (CS) is applied to facilitate efficient sparse signal transmissions over lossy communication links without data compression or error protection. The natural packet loss in the lossy link is modeled as a random sampling process of the transmitted data, and the original signal will be reconstructed from the lossy transmission results using the CS-based reconstruction method at the receiving end. The impacts of packet lengths on transmission efficiency under different channel conditions have been discussed, and interleaving is incorporated to mitigate the impact of burst data loss. Extensive simulations and experiments have been conducted and compared to the traditional automatic repeat request (ARQ) interpolation technique, and very favorable results have been observed in terms of both accuracy of the reconstructed signals and the transmission energy consumption. Furthermore, the packet length effect provides useful insights for using compressed sensing for efficient sparse signal transmission via lossy links.

Description: A model for simulating vertical water level fluctuations with coupled liquid and gas phases is presented. The Preissmann implicit scheme is used to linearize the governing equations for one-dimensional transient flow for both liquid and gas phases, and the linear system is solved using the chasing method. Some classical cases for single liquid and gas phase transients in pipelines and networks are studied to verify that the proposed methods are accurate and reliable. The implicit scheme is extended using a dynamic mesh to simulate the water level fluctuations in a U-tube and an open surge tank without consideration of the gas phase. Methods of coupling liquid and gas phases are presented and used for studying the transient process and interaction between the phases, for gas phase limited in a chamber and gas phase transported in a pipeline. In particular, two other simplified models, one neglecting the effect of the gas phase on the liquid phase and the other one coupling the liquid and gas phases asynchronously, are proposed. The numerical results indicate that the asynchronous model performs better, and are finally applied to a hydropower station with surge tanks and air shafts to simulate the water level fluctuations and air speed.

Description: Patients with a polyherbal prescription are more likely to receive duplicate medications and thus suffer from adverse drug reactions. We conducted a population-based retrospective study to examine the items of Chinese herbal medicine (CHM) per prescription in the ambulatory care of traditional Chinese medicine (TCM) in Taiwan. We retrieved complete TCM ambulatory visit datasets for 2010 from the National Health Insurance database in Taiwan. A total of 59,790 patients who received 313,482 CHM prescriptions were analyzed. Drug prescriptions containing more than five drugs were classified as polyherbal prescriptions; 41.6% of patients were given a polyherbal prescription. There were on average 5.2 ± 2.5 CHMs: 2.3 ± 1.1 compound herbal formula items, and 3.0 ± 2.5 single Chinese herb items in a single prescription. Approximately 4.6% of patients were prescribed 10 CHMs or more. Men had a lower odds ratio (OR) among polyherbal prescriptions (OR = 0.96, 95% confidence interval [CI] 0.92–0.99), and middle-aged patients (35–49 years) had the highest frequency of polyherbal prescription (OR = 1.19, 95% CI = 1.13–1.26). Patients with neoplasm, skin and subcutaneous tissue disease, or genitourinary system disease were more likely to have a polyherbal prescription; OR = 2.20 (1.81–2.67), 1.65 (1.50–1.80), and 1.52 (1.40–1.64), respectively. Polyherbal prescription is widespread in TCM in Taiwan. Potential herb interactions and iatrogenic risks associated with polyherbal prescriptions should be monitored.

Description: Atmospheric concentrations of carbon dioxide (CO2), a major cause of global warming, have been rising due to industrial development. Carbon capture and storage (CCS), which is regarded as the most effective way to reduce such atmospheric CO2 concentrations, has several environmental and technical disadvantages. Carbon capture and utilization (CCU), which has been introduced to cover such disadvantages, makes it possible to capture CO2, recycling byproducts as resources. However, CCU also requires large amounts of energy in order to induce reactions. Among existing CCU technologies, the process for converting CO2 into CaCO3 requires high temperature and high pressure as reaction conditions. This study proposes a method to fixate CaCO3 stably by using relatively less energy than existing methods. After forming NaOH absorbent solution through electrolysis of NaCl in seawater, CaCO3 was precipitated at room temperature and pressure. Following the experiment, the resulting product CaCO3 was analyzed with Fourier transform infrared spectroscopy (FT-IR); field emission scanning electron microscopy (FE-SEM) image and X-ray diffraction (XRD) patterns were also analyzed. The results showed that the CaCO3 crystal product was high-purity calcite. The study shows a successful method for fixating CO2 by reducing carbon dioxide released into the atmosphere while forming high-purity CaCO3.

Description: The use of a novel micro pressurized liquid extraction (µPLE) method for the isolation of 16 priority pollutant polycyclic aromatic hydrocarbons (PAHs) from various solid samples is explored. The technique employs rapid heating in a single static extraction mode to remove analytes in a matter of seconds from 5–10 mg samples using only 125 µL of solvent. For example, results show that 30 s extractions with toluene at 200 °C produce respective PAH recovery ranges of 90%–130% and 88%–114% from samples of soil and smoked chicken. Comparatively, solids containing significant amounts of biochar were more challenging to extract from. For instance, when using a pure biochar sample matrix, recoveries for the 16 PAHs range from only 33%–66% after 60 s of extraction with toluene at 200 °C. Overall, these extraction results agree very well with those reported when using conventional methods on similar samples. Therefore, the findings indicate that µPLE can potentially provide an alternative sample preparation method for PAHs that is both very rapid and requires little solvent.

Description: The effect of fuel composition on gasification process performance was investigated by performing mass and energy balances on a pre-pilot scale bubbling fluidized bed reactor fed with mixtures of plastic waste, wood, and coal. The fuels containing plastic waste produced less H2, CO, and CO2 and more light hydrocarbons than the fuels including biomass. The lower heating value (LHV) progressively increased from 5.1 to 7.9 MJ/Nm3 when the plastic waste fraction was moved from 0% to 100%. Higher carbonaceous fines production was associated with the fuel containing a large fraction of coal (60%), producing 87.5 g/kgFuel compared to only 1.0 g/kgFuel obtained during the gasification test with just plastic waste. Conversely, plastic waste gasification produced the highest tar yield, 161.9 g/kgFuel, while woody biomass generated only 13.4 g/kgFuel. Wood gasification showed a carbon conversion efficiency (CCE) of 0.93, while the tests with two fuels containing coal showed lowest CCE values (0.78 and 0.70, respectively). Plastic waste and wood gasification presented similar cold gas efficiency (CGE) values (0.75 and 0.76, respectively), while that obtained during the co-gasification tests varied from 0.53 to 0.73.

Description: This paper introduces a new simple system with a butterfly chaotic attractor. This system has rich and complex dynamics. With some typical parameters, its Lyapunov dimension is greater than other known three dimensional chaotic systems. It exhibits chaotic behavior over a large range of parameters, and the divergence of flow of this system is not a constant. The dynamics of this new system are analyzed via Lyapunov exponent spectrum, bifurcation diagrams, phase portraits and the Poincaré map. The compound structures of this new system are also analyzed. By means of topological horseshoe theory and numerical computation, the Poincaré map defined for the system is proved to be semi-conjugate to 3-shift map, and thus the system has positive topological entropy.

Description: In this paper, the problem of robust control of nonlinear fractional-order systems in the presence of uncertainties and external disturbance is investigated. Fuzzy logic systems are used for estimating the unknown nonlinear functions. Based on the fractional Lyapunov direct method and some proposed Lemmas, an adaptive fuzzy controller is designed. The proposed method can guarantee all the signals in the closed-loop systems remain bounded and the tracking errors converge to an arbitrary small region of the origin. Lastly, an illustrative example is given to demonstrate the effectiveness of the proposed results.

Description: This paper proposes a resonant electric cradle design with infant cries recognition, employing an Arduino UNO as the core processor. For most commercially available electric cradles, the drive motor is closely combined with the bearing on the top, resulting in a lot of energy consumption. In this proposal, a ball bearing design was adopted and the driving force is under the cradle to increase the distance from the object to fulcrum and torque. The sensors are designed to detect the oscillation state, and then the force is driven at the critical time to achieve the maximum output response while saving energy according to the principle of resonance. As for the driving forces, the winding power and motors are carefully placed under the cradle. The sensors, including the three-axis accelerometer and infrared sensor, are tested and applied under swinging amplitude control. In addition, infant cry recognition technology was incorporated in the design to further develop its functionality, which is a rare feature in this kind of hardware. The proposed nonlinear operator of fundamental frequency ( ) analysis is able to identify different types of infant cries. In conclusion, this paper proposes an energy-saving electric cradle with infant cries recognition and the experimental results demonstrate the effectiveness of this approach.

Description: Many people find that their sleep is restricted or disturbed by social obligations, including work. Sleep phase delays can affect an individual’s circadian rhythms on the following day and cause daytime sleepiness and/or poor performance. In this study, to examine weekly variations in sleep patterns, we analyzed sleep data for seven-day periods (from Sunday to Saturday) that had been collected from 2914 subjects (aged 20–79 years) over a total of 24,899 subject-weeks using contactless biomotion sensors. On the weekend, the subjects’ mean sleep midpoint, bedtime, and wake-up time were delayed by 40, 26 and 53 min, respectively, compared with those seen on weekdays. In addition, on weekdays, the mean difference between the maximum and median sleep midpoint ranged from 35 to 47 min among the subjects in their 20 s–70 s. The weekend delay and weekday variation in the subjects’ sleep patterns tended to decrease with age. This study detected sleep pattern disturbances on both weekdays and weekends. The serial changes in weekday bedtimes detected in this study suggest that sleep habits are influenced by changes in the temporal patterns of social activities/duties. We need further study the advantages of getting extra sleep and the disadvantages of sleep pattern disturbances in daily lifestyle.

Description: Free acidity of aqueous solutions was initially defined in 1909 by Søren Peter Lauritz Sørensen as pH = −lgcH+ (c/mol·dm−3 or m/mol·kg−1 of the free hydrogen ions in solution, H+) soon (1910) was changed to pH = paH+ = −lgaH+, integrating the new concepts of activity, ai and activity coefficient γi, for the ionic species i under concern, H+ in this case; it is ai = −lg(miγi). Since individual ions do not exist alone in solution, primary pH values cannot be assigned solely by experimental measurements, requiring extra thermodynamic model assumptions for the activity coefficient, γH+, which has put pH in a unique situation of not being fully traceable to the International System of Units (SI). Also the concept of activity is often not felt to be as perceptible as that of concentration which may present difficulties, namely with the interpretation of data. pH measurements on unknown samples rely on calibration of the measuring setup with adequate reference pH buffers. In this work, the assignment of pH values to buffers closely matching the samples, e.g., seawater, is revisited. An approach is presented to assess the quantity pmH+ = −lgmH+ profiting from the fact that, contrary to single ion activity coefficients, mean activity coefficients,   can be assessed based on experimentally assessed quantities alone, γExp ±, thus ensuring traceability to the mole, the SI base unit for amount of substance. Compatibility between γExp ± and mean activity coefficient calculated by means of Pitzer model equations, γPtz ±, validates the model for its intended use.

Description: Atomic force microscope with applicable types of operation in a liquid environment is widely used to scan the contours of biological specimens. The contact mode of operation allows a tip to touch a specimen directly but sometimes it damages the specimen; thus, a tapping mode of operation may replace the contact mode. The tapping mode triggers the cantilever of the microscope approximately at resonance frequencies, and so the tip periodically knocks the specimen. It is well known that the cantilever induces extra liquid pressure that leads to drift in the resonance frequency. Studies have noted that the heights of protein surfaces measured via the tapping mode of an atomic force microscope are ~25% smaller than those measured by other methods. This discrepancy may be attributable to the induced superficial hydrodynamic pressure, which is worth investigating. In this paper, we introduce a semi-analytical method to analyze the pressure distribution of various tip geometries. According to our analysis, the maximum hydrodynamic pressure on the specimen caused by a cone-shaped tip is ~0.5 Pa, which can, for example, pre-deform a cell by several nanometers in compression before the tip taps it. Moreover, the pressure calculated on the surface of the specimen is 20 times larger than the pressure without considering the tip effect; these results have not been motioned in other papers. Dominating factors, such as surface heights of protein surface, mechanical stiffness of protein increasing with loading velocity, and radius of tip affecting the local pressure of specimen, are also addressed in this study.

Description: This study explores the potential of Synthetic Aperture Radar (SAR) to aid Unmanned Aerial Vehicle (UAV) navigation when Inertial Navigation System (INS) measurements are not accurate enough to eliminate drifts from a planned trajectory. This problem can affect medium-altitude long-endurance (MALE) UAV class, which permits heavy and wide payloads (as required by SAR) and flights for thousands of kilometres accumulating large drifts. The basic idea is to infer position and attitude of an aerial platform by inspecting both amplitude and phase of SAR images acquired onboard. For the amplitude-based approach, the system navigation corrections are obtained by matching the actual coordinates of ground landmarks with those automatically extracted from the SAR image. When the use of SAR amplitude is unfeasible, the phase content can be exploited through SAR interferometry by using a reference Digital Terrain Model (DTM). A feasibility analysis was carried out to derive system requirements by exploring both radiometric and geometric parameters of the acquisition setting. We showed that MALE UAV, specific commercial navigation sensors and SAR systems, typical landmark position accuracy and classes, and available DTMs lead to estimated UAV coordinates with errors bounded within ±12 m, thus making feasible the proposed SAR-based backup system.

Description: This paper demonstrates an automated computer vision system for outdoor tree crop enumeration in a seedling nursery. The complete system incorporates both hardware components (including an embedded microcontroller, an odometry encoder, and an uncalibrated digital color camera) and software algorithms (including microcontroller algorithms and the proposed algorithm for tree crop enumeration) required to obtain robust performance in a natural outdoor environment. The enumeration system uses a three-step image analysis process based upon: (1) an orthographic plant projection method integrating a perspective transform with automatic parameter estimation; (2) a plant counting method based on projection histograms; and (3) a double-counting avoidance method based on a homography transform. Experimental results demonstrate the ability to count large numbers of plants automatically with no human effort. Results show that, for tree seedlings having a height up to 40 cm and a within-row tree spacing of approximately 10 cm, the algorithms successfully estimated the number of plants with an average accuracy of 95.2% for trees within a single image and 98% for counting of the whole plant population in a large sequence of images.

Description: Drainage networks are essential compartments in an urban infrastructure system for the efficient collection and prompt drainage of flood water. In addition to the advances in numerical techniques on urban flood simulation, the topological characteristics of urban drainage networks and their impacts on flooding have not been investigated thoroughly despite their importance. This study evaluated the urban drainage networks in Seoul, South Korea, in terms of the network configuration and its implication for peak flows and flood mitigation. Gibbs’ model was used to analyze the network configuration of 31 urban catchments with various slope ranges. The results showed that urban drainage networks can be less efficient than river in nature in terms of the drainage time, which is counter-intuitive. On the other hand, the analysis showed that efficient networks have risks of flood concentration and, hence, increase potential flood risks. This study showed that efficient networks tend to have higher peak flows at the outlet and vice versa. Therefore, an alternative drainage network layout, which is less efficient and more sinuous, was introduced and it resulted in reduced peak flows and flooding. This result shows managing a proper drainage network layout can contribute to flood mitigation in urban catchments.

Description: Aquifers within the Columbia River Basalt Group (CRBG) provide a critical water supply throughout much of the Pacific Northwest of the United States. Increased pumping has resulted in water level declines in this region. Recharge into this aquifer system is generally not well understood. Recent suggestions of probable decades-long droughts in the 21st century add to this problem. We show that geophysical methods can provide useful parameters for improved modeling of aquifers in a primary CRBG aquifer located on the eastern edge of the Columbia Plateau. Groundwater models depend in part on the area, thickness, porosity, storativity, and nature of confinement of this aquifer, most of which are poorly constrained by existing well information and previous stress tests. We have made use of surface gravity measurements, borehole gravity measurements, barometric efficiency estimates, earth tidal response, and earthquake seismology observations to constrain these parameters. We show that the aquifer, despite its persistent drawdown, receives a great deal of recharge annually. Much of the recharge to the aquifer is due to leakage from overlying flows, ultimately tied to precipitation, an important result for future aquifer management in times of sustained drought.

Description: Low flows of the Ilmenau River (1434 km2) in northwest Germany have decreased by about 25% over the last 50 years. In the same period, moderate climate changes have taken place and annual groundwater abstractions for sprinkler irrigation have increased by up to 50 hm3 (million m3), with a strong variation due to the respective prevailing weather conditions. Time-series analyses with multiple regression analysis allow detecting and quantifying different influences on low flows. It is also shown that farmers allocate irrigation water volumes carefully according to seasonal precipitation and temperatures. Decline of groundwater levels in summer and the low flow situation are aggravated by the cumulative effect of higher irrigation in drier years. Groundwater recharge and recovery of the water table have been observed subsequently during the winter season.

Description: Cities’ energy usage accounts for two thirds of global primary energy consumption. Energy efficiency in urban areas is, therefore, one of the most important topics to consider when dealing with urban sustainability. This paper evaluates the goals for increasing energy efficiency and use of renewable energy sources in the areas of transportation, buildings and consumers’ awareness, as stated in the Climate action plan, for the municipality of Eskilstuna, Sweden. The efforts of the municipality to successfully reach their energy efficiency goals, are described in this paper including future perspectives. The results show that although the municipality counts with the advantage of owning and working together with the local housing company and energy provider, in order to reach the established goals, additional strategies need to be considered. For an increased use of renewable energy sources, analysis of rooftops suitable for photovoltaic (PV) installation should be carried out as well as the integration of goals for self-consumption. In the transport field, the city needs to prepare for large-scale electric vehicle (EV) market penetration and to consider different bike or car sharing options. Finally, more specific awareness campaigns are needed to engage the citizens in reducing their energy consumption and living a more sustainable life.

Description: The combination of optical trapping with Raman spectroscopy provides a powerful method for the study, characterization, and identification of biological micro-particles. In essence, optical trapping helps to overcome the limitation imposed by the relative inefficiency of the Raman scattering process. This allows Raman spectroscopy to be applied to individual biological particles in air and in liquid, providing the potential for particle identification with high specificity, longitudinal studies of changes in particle composition, and characterization of the heterogeneity of individual particles in a population. In this review, we introduce the techniques used to integrate Raman spectroscopy with optical trapping in order to study individual biological particles in liquid and air. We then provide an overview of some of the most promising applications of this technique, highlighting the unique types of measurements enabled by the combination of Raman spectroscopy with optical trapping. Finally, we present a brief discussion of future research directions in the field.

Description: In this paper, we propose a novel extrinsic calibration method for camera networks using a sphere as the calibration object. First of all, we propose an easy and accurate method to estimate the 3D positions of the sphere center w.r.t. the local camera coordinate system. Then, we propose to use orthogonal procrustes analysis to pairwise estimate the initial camera relative extrinsic parameters based on the aforementioned estimation of 3D positions. Finally, an optimization routine is applied to jointly refine the extrinsic parameters for all cameras. Compared to existing sphere-based 3D position estimators which need to trace and analyse the outline of the sphere projection in the image, the proposed method requires only very simple image processing: estimating the area and the center of mass of the sphere projection. Our results demonstrate that we can get a more accurate estimate of the extrinsic parameters compared to other sphere-based methods. While existing state-of-the-art calibration methods use point like features and epipolar geometry, the proposed method uses the sphere-based 3D position estimate. This results in simpler computations and a more flexible and accurate calibration method. Experimental results show that the proposed approach is accurate, robust, flexible and easy to use.

Description: The current accelerated growth in demand for energy globally is confronted by water-resource limitations and hydrologic variability linked to climate change. The global spatial and temporal trends in water requirements for energy development and policy alternatives to address these constraints are poorly understood. This article analyzes national-level energy demand trends from U.S. Energy Information Administration data in relation to newly available assessments of water consumption and life-cycle impacts of thermoelectric generation and biofuel production, and freshwater availability and sectoral allocations from the U.N. Food and Agriculture Organization and the World Bank. Emerging, energy-related water scarcity flashpoints include the world’s largest, most diversified economies (Brazil, India, China, and USA among others), while physical water scarcity continues to pose limits to energy development in the Middle East and small-island states. Findings include the following: (a) technological obstacles to alleviate water scarcity driven by energy demand are surmountable; (b) resource conservation is inevitable, driven by financial limitations and efficiency gains; and (c) institutional arrangements play a pivotal role in the virtuous water-energy-climate cycle. We conclude by making reference to coupled energy-water policy alternatives including water-conserving energy portfolios, intersectoral water transfers, virtual water for energy, hydropower tradeoffs, and use of impaired waters for energy development.

Description: In the last decades the increasing energy requirements along with the need to face the consequences of climate change have driven the search for renewable energy sources, in order to replace as much as possible the use of fossil fuels. In this context biomass has generated great interest as it can be converted into energy via several routes, including fermentation and anaerobic digestion. The former is the most common option to produce ethanol, which has been recognized as one of the leading candidates to substitute a large fraction of the liquid fuels produced from oil. As the economic competitiveness of bioethanol fermentation processes has to be enhanced in order to promote its wider implementation, the most recent trends are directed towards the use of fermentation by-products within anaerobic digestion. The integration of both fermentation and anaerobic digestion, in a biorefinery concept, would allow the production of ethanol along with that of biogas, which can be used to produce heat and electricity, thus improving the overall energy balance. This work aims at reviewing the main studies on the combination of both bioethanol and biogas production processes, in order to highlight the strength and weakness of the integrated treatment for industrial application.

Description: Objective: To assess the burden of regional environmental factors influencing the incidence of Melanoma in the Italian population and overcome the problem of partial population coverage by local cancer registries and thematic archives. Methods: We analyzed the Italian national hospitalization records from 2001 to 2008 provided by the Ministry of Health, excluding hospital re-admissions of the same patients, in order to assess the occurrence of Melanoma over a 8-year period. Data were presented by age groups (absolute number of cases from 20 to ≥80 years old) and per Region (rates per 100,000 inhabitants) for each year. Results: The overall number of new hospitalizations due to malignant Melanoma increased by 16.8% from 2001 (n = 4846) to 2008 (n = 5823), with the rate per 100,000 inhabitants passing from 10.5 to almost 12.0 at a national level. The majority of new diagnoses of malignant Melanoma was observed in two age groups: 61–70 years old (from 979 in 2001 up to 2109 in 2008, corresponding to 15.1 and 18.1 new cases per 100,000 inhabitants, respectively) and 71–80 years old (from 954 in 2001 up to 1141 in 2008, corresponding to 19.5 and 21.8 new cases per 100,000 inhabitants, respectively). The number of hospitalizations due to Melanoma increased in all age groups with the only exception of the youngest patients aged 20–30 years old. The highest increases over the 8-year period were observed in people aged ≥81 years old (+34%), 61–70 years old (+20%) and surprisingly in the age group 31–40 years old (+17%). Southern Regions showed lower hospitalization rates compared to Northern Italy and Region Lazio. The highest increases between 2001 and 2008 were observed in Trentino/Alto Adige, Friuli Venezia Giulia, Valla d’Aosta and Veneto Region. Conclusions: Hospitalizations due to malignant Melanoma in Italy seem to be influenced by environmental or population-related factors showing a decreasing incidence rate from the Northern to Southern Regions.

Description: This paper presents preliminary polarization measurements and systematic-error characterization of the Thirty Gigahertz Instrument receiver developed for the QUIJOTE experiment. The instrument has been designed to measure the polarization of Cosmic Microwave Background radiation from the sky, obtaining the Q, U, and I Stokes parameters of the incoming signal simultaneously. Two kinds of linearly polarized input signals have been used as excitations in the polarimeter measurement tests in the laboratory; these show consistent results in terms of the Stokes parameters obtained. A measurement-based systematic-error characterization technique has been used in order to determine the possible sources of instrumental errors and to assist in the polarimeter calibration process.

Description: During the last few years, the issues of energy efficiency and energy saving have dominated the buildings research field. New constructions are based on efficient design and, because of this, the real challenge is to retrofit existing buildings. Italian standards impose thermal transmittance limits for opaque and transparent surfaces, according to the climatic area. In order to understand buildings’ energy behavior, an accurate analysis, carried out by employing advanced calculation codes and instrumental diagnosis—provided by the use of heat flow meter, surface temperature probes and thermal imaging camera—is needed. In this paper, a structure built in the 50 s has been analyzed, by means of a measurement campaign, to investigate the building’s characteristics and its vulnerability. Finally, some retrofit hypotheses have been evaluated by means of a well-known dynamic code. All investments have to be analyzed under a financial point of view, considering materials and installation costs. For this reason, the payback time has been calculated in order to understand how quickly the energy upgrading can be repaid.

Description: The main aim of this research was to improve risk mapping of heavy metals by taking account of erosion effects. A new spatiotemporal index, namely the G2met index, is introduced, with integration of pre-existing methodologies (Hakanson, EPM, and G2). The G2met index is depicted as a series of risk maps for each heavy metal on a month-time step. The southern part of Cyprus Island was selected as a study area. Concentration of major heavy metals was extracted with soil sampling in a grid of 5350 sites. Rainfall, vegetation, soil, land use, topographic, and hydrologic data were collected from existing European or global databases (WorldClim, BioBar, REDES, ESDAC, CORINE, ASTER GDEM, and USGS). A large number of regional-scale risk maps (with 500-m cell size) were created: one for each heavy metal and totally per month and annually; in addition, choropleth maps in terms of statistics per river basin were produced for every metal. Generally, the G2met maps resulted in different spatial patterns in comparison to those depicted by the Hakanson index alone.

Description: In this paper, we investigate the basic properties of binary classification with a pseudo model based on the Itakura–Saito distance and reveal that the Itakura–Saito distance is a unique appropriate measure for estimation with the pseudo model in the framework of general Bregman divergence. Furthermore, we propose a novelmulti-task learning algorithm based on the pseudo model in the framework of the ensemble learning method. We focus on a specific setting of the multi-task learning for binary classification problems. The set of features is assumed to be common among all tasks, which are our targets of performance improvement. We consider a situation where the shared structures among the dataset are represented by divergence between underlying distributions associated with multiple tasks. We discuss statistical properties of the proposed method and investigate the validity of the proposed method with numerical experiments.

Description: Background: Second hand smoke (ETS)-associated particulate matter (PM) contributes considerably to indoor air contamination and constitutes a health risk for passive smokers. Easy to measure, PM is a useful parameter to estimate the dosage of ETS that passive smokers are exposed to. Apart from its suitability as a surrogate parameter for ETS-exposure, PM itself affects human morbidity and mortality in a dose-dependent manner. We think that ETS-associated PM should be considered an independent hazard factor, separately from the many other known harmful compounds of ETS. We believe that brand-specific and tobacco-product-specific differences in the release of PM matter and that these differences are of public interest. Methods: To generate ETS of cigarettes and cigarillos as standardized and reproducible as possible, an automatic second hand smoke emitter (AETSE) was developed and placed in a glass chamber. L&M cigarettes (“without additives”, “red label”, “blue label”), L&M filtered cigarillos (“red”) and 3R4F standard research cigarettes (as reference) were smoked automatically according to a self-developed, standardized protocol until the tobacco product was smoked down to 8 mm distance from the tipping paper of the filter. Results: Mean concentration (Cmean) and area under the curve (AUC) in a plot of PM2.5 against time were measured, and compared. CmeanPM2.5 were found to be 518 μg/m3 for 3R4F cigarettes, 576 μg/m3 for L&M “without additives” (“red”), 448 μg/m3 for L&M “blue label”, 547 μg/m3 for L&M “red label”, and 755 μg/m3 for L&M filtered cigarillos (“red”). AUCPM2.5-values were 208,214 μg/m3·s for 3R4F reference cigarettes, 204,629 μg/m3·s for L&M “without additives” (“red”), 152,718 μg/m3·s for L&M “blue label”, 238,098 μg/m3·s for L&M “red label” and 796,909 μg/m3·s for L&M filtered cigarillos (“red”). Conclusion: Considering the large and significant differences in particulate matter emissions between cigarettes and cigarillos, we think that a favorable taxation of cigarillos is not justifiable.

Description: Drought is a serious natural hazard with far-reaching impacts including soil damages, economic losses, and threatening the livelihood and health of local residents. The goal of the present work was to monitor the vegetation health across Lebanon in 2014 using remote sensing techniques. Landsat images datasets, with a spatial resolution of 30 m and from different platforms, were used to identify the VCI (Vegetation Condition Index) and TCI (Temperature Condition Index). The VCI was based on the Normalized Difference Vegetation Index (NDVI) datasets. The TCI used land surface temperature (LST) datasets. As a result, the VHI (Vegetation Health Index) was produced and classified into five categories: extreme, severe, moderate, mild, and no drought. The results show practically no extreme drought (~0.27 km2) in the vegetated area in Lebanon during 2014. Moderate to severe drought mainly occurred in the north of Lebanon (i.e., the Amioun region and the plain of Akkar). The Tyr region and the Bekaa valley experienced a low level of drought (mild drought). This approach allows decision makers to monitor, investigate and resolve drought conditions more effectively.

Description: Fruit classification is quite difficult because of the various categories and similar shapes and features of fruit. In this work, we proposed two novel machine-learning based classification methods. The developed system consists of wavelet entropy (WE), principal component analysis (PCA), feedforward neural network (FNN) trained by fitness-scaled chaotic artificial bee colony (FSCABC) and biogeography-based optimization (BBO), respectively. The K-fold stratified cross validation (SCV) was utilized for statistical analysis. The classification performance for 1653 fruit images from 18 categories showed that the proposed “WE + PCA + FSCABC-FNN” and “WE + PCA + BBO-FNN” methods achieve the same accuracy of 89.5%, higher than state-of-the-art approaches: “(CH + MP + US) + PCA + GA-FNN ” of 84.8%, “(CH + MP + US) + PCA + PSO-FNN” of 87.9%, “(CH + MP + US) + PCA + ABC-FNN” of 85.4%, “(CH + MP + US) + PCA + kSVM” of 88.2%, and “(CH + MP + US) + PCA + FSCABC-FNN” of 89.1%. Besides, our methods used only 12 features, less than the number of features used by other methods. Therefore, the proposed methods are effective for fruit classification.

Description: We propose an optimal electric energy management of a cooperative multi-microgrid community with sequentially coordinated operations. The sequentially coordinated operations are suggested to distribute computational burden and yet to make the optimal 24 energy management of multi-microgrids possible. The sequential operations are mathematically modeled to find the optimal operation conditions and illustrated with physical interpretation of how to achieve optimal energy management in the cooperative multi-microgrid community. This global electric energy optimization of the cooperative community is realized by the ancillary internal trading between the microgrids in the cooperative community which reduces the extra cost from unnecessary external trading by adjusting the electric energy production amounts of combined heat and power (CHP) generators and amounts of both internal and external electric energy trading of the cooperative community. A simulation study is also conducted to validate the proposed mathematical energy management models.

Description: We wish to make the following changes to the published article [1], agreed upon by all authors. Claudia R. Binder has withdrawn her co-authorship. The corrected author list should therefore read: Camilo Lesmes-Fabian.[...]

Description: The cadmium (Cd) contaminated rice fields in Mae Sot District, Tak Province, Thailand has been one of the major environmental problems in Thailand for the last 10 years. We used disability adjusted life years (DALYs) to estimate the burden of disease attributable to Cd in terms of additional DALYs of Mae Sot residents. Cd exposure data included Cd and β2–microglobulin (β2-MG) in urine (as an internal exposure dose) and estimated cadmium daily intake (as an external exposure dose). Compared to the general Thai population, Mae Sot residents gained 10%–86% DALYs from nephrosis/nephritis, heart diseases, osteoporosis and cancer depending on their Cd exposure type and exposure level. The results for urinary Cd and dietary Cd intake varied according to the studies used for risk estimation. The ceiling effect was observed in results using dietary Cd intake because of the high Cd content in rice grown in the Mae Sot area. The results from β2-MG were more robust with additional DALYs ranging from 36%–86% for heart failure, cerebral infraction, and nephrosis/nephritis. Additional DALYs is a useful approach for assessing the magnitude of environmental Cd exposure. The Mae Sot population lost more healthy life compared to populations living in a non- or less Cd polluted area. This method should be applicable to various types of environmental contamination problems if exposure assessment information is available.

Description: Titanium dioxide nanoparticles (TiO2NPs) suspensions (concentration 1.0 g/L) in synthetic sweat solution were applied on Franz cells for 24 h using intact and needle-abraded human skin. Titanium content into skin and receiving phases was determined. Cytotoxicity (MTT, AlamarBlue® and propidium iodide, PI, uptake assays) was evaluated on HaCat keratinocytes after 24 h, 48 h, and seven days of exposure. After 24 h of exposure, no titanium was detectable in receiving solutions for both intact and damaged skin. Titanium was found in the epidermal layer after 24 h of exposure (0.47 ± 0.33 μg/cm2) while in the dermal layer, the concentration was below the limit of detection. Damaged skin, in its whole, has shown a similar concentration (0.53 ± 0.26 μg/cm2). Cytotoxicity studies on HaCaT cells demonstrated that TiO2NPs induced cytotoxic effects only at very high concentrations, reducing cell viability after seven days of exposure with EC50s of 8.8 × 10−4 M (MTT assay), 3.8 × 10−5 M (AlamarBlue® assay), and 7.6 × 10−4 M (PI uptake, index of a necrotic cell death). Our study demonstrated that TiO2NPs cannot permeate intact and damaged skin and can be found only in the stratum corneum and epidermis. Moreover, the low cytotoxic effect observed on human HaCaT keratinocytes suggests that these nano-compounds have a potential toxic effect at the skin level only after long-term exposure.

Description: The disposal of industrial paper mill sludge waste is a big issue and has a great importance all over the world. A study was conducted to determine the chemical properties of recycled paper mill sludge (RPMS) and assess its possibilities for land application. RPMS samples were collected from six different paper mills in Malaysia and analyzed for physical and chemical properties, heavy metals, polycyclic aromatic hydrocarbons, 13C-NMR spectra and for the presence of dioxins/furans. The RPMS was dewatered, sticky with a strong odour, an average moisture of 65.08%, pH 7.09, cation exchange capacity (CEC) 14.43 cmol (+) kg–1, N 1.45, P 0.18, K 0.12, Ca 0.82, Mg 0.73, Na 0.76 and Al, 1.38%. The polycyclic aromatic hydrocarbons (PAHs) and heavy metals levels were below the standard Class 2 limits. The dioxin and furan were in below the standard concentration of Class 1. The most prominent peak in the 13C-NMR spectra of RPMS was centered at 31 ppm, proving the presence of methylene (-CH2) groups in long aliphatic chains, with lipids and proteins. The signal at 89 ppm and highly shielded shoulder at 83 ppm were due to presence of cellulose carbon C-4, and the peak at 63 and 65 ppm was due to the cellulose carbon spectrum. The RPMS therefore contains significant amount of nutrients with safe levels of heavy metals and PAHs for environment and can be used as a fertilizer and soil amendment for land application.

Description: Doctor-shopping has caused an increase in medical expense, potential to receive duplicate medications, and suffer adverse drug reactions. We carried out a population-based retrospective study aimed at examining the user patterns of traditional Chinese medicine (TCM) ambulatory care in Taiwan. We retrieved complete TCM ambulatory visit datasets for the year 2007 from the National Health Insurance database in Taiwan. We defined the patients whose distribution of TCM physician numbers scored more than 97.5 percent (more than, or equal to, five TCM physicians) within one year as TCM doctor-shoppers. In total, 6,596,814 subjects (28.9%) paid TCM visits during that year. All 177,728 subjects (2.69%) who visited more than five (including) TCM physicians were classified as TCM shoppers. The most prevalent diagnostic grouping was upper respiratory infections (44.7%) and sprains and strains (44.0%). Men had a lower odds ratio (OR) among TCM shoppers than women (OR = 0.94, 95% confidence interval (CI) = 0.93–0.96). Younger people were less likely to be TCM shoppers than other people were. The ORs of TCM shoppers were higher among veterans and low-income patients (OR = 1.29 (1.23–1.35), and 1.33 (1.27–1.41)). In conclusion, health education on the potential of drug interactions and iatrogenic health risks incurred from doctor-shopping should be addressed to those high-risk patients.

Description: Day-to-day variability and stability of children’s physical activity levels across days of the week are not well understood. Our aims were to examine the day-to-day variability of moderate-to-vigorous physical activity (MVPA), to determine factors influencing the day-to-day variability of MVPA and to estimate stability of MVPA in children. The sample comprises 686 Portuguese children (10 years of age). MVPA was assessed with an accelerometer, and BMI was computed from measured height and weight. Daily changes in MVPA and their correlates (gender, BMI, and maturity) were modeled with a multilevel approach, and tracking was calculated using Foulkes & Davies γ. A total of 51.3% of boys and 26.2% of girls achieved 60 min/day of MVPA on average. Daily MVPA was lower during the weekend (23.6% of boys and 13.6% of girls comply with the recommended 60 min/day of MVPA) compared to weekdays (60.8% and 35.4%, boys and girls, respectively). Normal weight children were more active than obese children and no effect was found for biological maturation. Tracking is low in both boys (γ = 0.59 ± 0.01) and girls (γ = 0.56 ± 0.01). Children’s MVPA levels during a week are highly unstable. In summary, boys are more active than girls, maturation does not affect their MVPA, and obese children are less likely to meet 60 min/day of MVPA. These results highlight the importance of providing opportunities for increasing children’s daily MVPA on all days of week, especially on the weekend.

Description: In this paper, we propose a distributed data-gathering scheme using an autonomous underwater vehicle (AUV) working as a mobile sink to gather data from a randomly distributed underwater sensor network where sensor nodes are clustered around several cluster headers. Unlike conventional data-gathering schemes where the AUV visits either every node or every cluster header, the proposed scheme allows the AUV to visit some selected nodes named path-nodes in a way that reduces the overall transmission power of the sensor nodes. Monte Carlo simulations are performed to investigate the performance of the proposed scheme compared with several preexisting techniques employing the AUV in terms of total amount of energy consumption, standard deviation of each node’s energy consumption, latency to gather data at a sink, and controlling overhead. Simulation results show that the proposed scheme not only reduces the total energy consumption but also distributes the energy consumption more uniformly over the network, thereby increasing the lifetime of the network.

Description: Congestion pricing strategy has been recognized as an effective countermeasure in the practical field of urban traffic congestion mitigation. In this paper, a bi-level programming model considering carbon dioxide emission is proposed to mitigate traffic congestion and reduce carbon dioxide emissions. The objective function of the upper level model is to minimize the sum of travel costs and the carbon dioxide emissions costs. The lower level is a multi-modal transportation network equilibrium model. To solve the model, the method of successive averages (MSA) and the shuffled frog leaping algorithm (SFLA) are introduced. The proposed method and algorithm are tested through the numerical example. The results show that the proposed congestion pricing strategy can mitigate traffic congestion and reduce carbon emissions effectively.

Description: We investigated the synergetic effect between light-emitting diode (LED) lighting efficiency and building energy savings in heating and cooling using an alternative thermal operating system (ATOS) of indoor LED lighting integrated with the ventilation system of a building as an active cooling device. The heat generated from LED lighting and the indoor lighting illuminance were experimentally determined. The indoor heat gains in cooling and heating periods were determined using measurement data; the annual energy savings of an office building in heating and cooling were calculated through simulation. The LED lighting illuminance increased by approximately 40% and the lighting contribution for indoor heat gain was 7.8% in summer, while 69.8% in winter with the ATOS. Consequently, the annual total energy use of the office building could be reduced by 5.9%; the energy use in cooling and heating was reduced by 18.4% and 3.3%, respectively.

Description: The microbiological sanitary quality and safety of leafy greens and strawberries were assessed in the primary production in Belgium, Brazil, Egypt, Norway and Spain by enumeration of Escherichia coli and detection of Salmonella, Shiga toxin-producing E. coli (STEC) and Campylobacter. Water samples were more prone to containing pathogens (54 positives out of 950 analyses) than soil (16/1186) and produce on the field (18/977 for leafy greens and 5/402 for strawberries). The prevalence of pathogens also varied markedly according to the sampling region. Flooding of fields increased the risk considerably, with odds ratio (OR) 10.9 for Salmonella and 7.0 for STEC. A significant association between elevated numbers of generic E. coli and detection of pathogens (OR of 2.3 for STEC and 2.7 for Salmonella) was established. Generic E. coli was found to be a suitable index organism for Salmonella and STEC, but to a lesser extent for Campylobacter. Guidelines on frequency of sampling and threshold values for E. coli in irrigation water may differ from region to region.

Description: The objective of this research is to provide a standardized platform to monitor and predict indicators of people with traumatic brain injury using the International Classification of Functioning, Disability and Health, and analyze its potential benefits for people with disabilities, health centers and administrations. We developed a platform that allows automatic standardization and automatic graphical representations of indicators of the status of individuals and populations. We used data from 730 people with acquired brain injury performing periodic comprehensive evaluations in the years 2006–2013. Health professionals noted that the use of color-coded graphical representation is useful for quickly diagnose failures, limitations or restrictions in rehabilitation. The prognosis system achieves 41% of accuracy and sensitivity in the prediction of emotional functions, and 48% of accuracy and sensitivity in the prediction of executive functions. This monitoring and prognosis system has the potential to: (1) save costs and time, (2) provide more information to make decisions, (3) promote interoperability, (4) facilitate joint decision-making, and (5) improve policies of socioeconomic evaluation of the burden of disease. Professionals found the monitoring system useful because it generates a more comprehensive understanding of health oriented to the profile of the patients, instead of their diseases and injuries.

Description: Objectives: In 2005, China acceded to the World Health Organization Framework Convention on Tobacco Control (WHO FCTC), the foundation for the global fight against tobacco. Certain cities in China have established local regulations to control tobacco use ahead of national policy; however, without the enforcement of statutory law, some of these regulations are merely lip service. The aim of the study was to assess the effects of city policy on smoking prevalence and on second-hand smoke (SHS) exposure status among non-smokers in Changchun City. Methods: A cross-sectional survey covering a multiple-stage, representative sample of the urban population aged ≥15 years was conducted between 1 Dec 2013 and 31 Jan 2014. The WHO and the US Centers for Disease Control and Prevention developed the questionnaires used, which included demographic characteristics, smoking behaviors and SHS exposure status. Results: Overall cigarette smoking prevalence was 23.5%; daily cigarette smoking prevalence was 21.2%. Smoking prevalence and cigarettes consumed per day was higher among men (p 〈 0.05) and those aged 45–64 years (p 〈 0.05). Among current smokers, 8.1% planned to quit within 12 months; 53.4% had no intention of quitting. Overall SHS exposure prevalence was 41.9% (workplace) and 34.1% (at home) over the previous 30 days. The weighted workplace SHS exposure prevalence increased with age. Conclusions: The high proportion of smokers with no intention of quitting and the high level of SHS exposure may constitute one of the most significant barriers to successful smoking cessation in the city. A continued drive to promote full implementation of the WHO FCTC is still needed.

Description: Contemporary ecological models of health prominently feature the natural environment as fundamental to the ecosystem services that support human life, health, and well-being. The natural environment encompasses and permeates all other spheres of influence on health. Reviews of the natural environment and health literature have tended, at times intentionally, to focus on a limited subset of ecosystem services as well as health benefits stemming from the presence, and access and exposure to, green infrastructure. The sweeping influence of green infrastructure on the myriad ecosystem services essential to health has therefore often been underrepresented. This survey of the literature aims to provide a more comprehensive picture—in the form of a primer—of the many simultaneously acting health co-benefits of green infrastructure. It is hoped that a more accurately exhaustive list of benefits will not only instigate further research into the health co-benefits of green infrastructure but also promote consilience in the many fields, including public health, that must be involved in the landscape conservation necessary to protect and improve health and well-being.

Description: There is growing evidence of climate change affecting infectious disease risk in Western Europe. The call for effective adaptation to this challenge becomes increasingly stronger. This paper presents the results of a survey exploring Dutch expert perspectives on adaptation responses to climate change impacts on infectious disease risk in Western Europe. Additionally, the survey explores the expert sample’s prioritization of mitigation and adaptation, and expert views on the willingness and capacity of relevant actors to respond to climate change. An integrated view on the causation of infectious disease risk is employed, including multiple (climatic and non-climatic) factors. The results show that the experts consider some adaptation responses as relatively more cost-effective, like fostering interagency and community partnerships, or beneficial to health, such as outbreak investigation and response. Expert opinions converge and diverge for different adaptation responses. Regarding the prioritization of mitigation and adaptation responses expert perspectives converge towards a 50/50 budgetary allocation. The experts consider the national government/health authority as the most capable actor to respond to climate change-induced infectious disease risk. Divergence and consensus among expert opinions can influence adaptation policy processes. Further research is necessary to uncover prevailing expert perspectives and their roots, and compare these.

Description: Cigarette butts (tobacco product waste (TPW)) are the single most collected item in environmental trash cleanups worldwide. This brief descriptive study used an online survey tool (Survey Monkey) to assess knowledge, attitudes, and beliefs among individuals representing the Framework Convention Alliance (FCA) about this issue. The FCA has about 350 members, including mainly non-governmental tobacco control advocacy groups that support implementation of the World Health Organization’s (WHO) Framework Convention on Tobacco Control (FCTC). Although the response rate (28%) was low, respondents represented countries from all six WHO regions. The majority (62%) have heard the term TPW, and nearly all (99%) considered TPW as an environmental harm. Most (77%) indicated that the tobacco industry should be responsible for TPW mitigation, and 72% felt that smokers should also be held responsible. This baseline information may inform future international discussions by the FCTC Conference of the Parties (COP) regarding environmental policies that may be addressed within FCTC obligations. Additional research is planned regarding the entire lifecycle of tobacco’s impact on the environment.

Description: The aim of this study was to assess the correlation between blood lead levels and both serum uric acid and hyperuricemia in adult residents living within an area of China with lead pollution.  We conducted a cross-sectional analysis of 2120 subjects (1180 of whom were male) between the ages of 20 and 75 years who had undergone health examinations at the Centers for Disease Control and Prevention (CDC) in a lead-polluted area of China between January 2013 and August 2014. Blood lead was positively correlated with serum uric acid in both males (r = 0.095, p = 0.001) and females (r = 0.134, p 〈 0.001). Multivariate linear regression analysis demonstrated that for males, blood lead (p = 0.006), age (p = 0.001), current smoking (p = 0.012), education (p = 0.001), triglycerides (TG) (p 〈 0.001), and serum creatinine (p 〈 0.001) were independently associated with serum uric acid. For females, blood lead (p 〈 0.001), body mass index (BMI) (p = 0.009), and TG (p 〈 0.001) were independently associated with serum uric acid. After multiple adjustments, blood lead was significantly associated with a higher prevalence of hyperuricemia when female subjects were categorized into quartiles (for the highest quartile vs. the lowest quartile, odds ratio (OR) = 2.190; 95% confidence interval (CI): 1.106–4.338; p = 0.025); however, no such association was observed for male subjects. Continuous lead exposure has an independent impact on serum uric acid for both males and females, although this impact is more pronounced for females than for males. Lead exposure is significantly associated with hyperuricemia for females but not for males.

Description: Capacitive-type transduction is now widely used in MEMS microphones. However, its sensitivity decreases with reducing size, due to decreasing air gap capacitance. In the present study, we proposed and developed the Electret Gate of Field Effect Transistor (ElGoFET) transduction based on an electret and FET (field-effect-transistor) as a novel mechanism of MEMS microphone transduction. The ElGoFET transduction has the advantage that the sensitivity is dependent on the ratio of capacitance components in the transduction structure. Hence, ElGoFET transduction has high sensitivity even with a smaller air gap capacitance, due to a miniaturization of the transducer. A FET with a floating-gate electrode embedded on a membrane was designed and fabricated and an electret was fabricated by ion implantation with Ga+ ions. During the assembly process between the FET and the electret, the operating point of the FET was characterized using the static response of the FET induced by the electric field due to the trapped positive charge at the electret. Additionally, we evaluated the microphone performance of the ElGoFET by measuring the acoustic response in air using a semi-anechoic room. The results confirmed that the proposed transduction mechanism has potential for microphone applications.

Description: The internet and associated Information and Communications Technologies (ICT) are diffusing at an astounding pace. As data centers (DCs) proliferate to accommodate this rising demand, their environmental impacts grow too. While the energy efficiency of DCs has been researched extensively, their water footprint (WF) has so far received little to no attention. This article conducts a preliminary WF accounting for cooling and energy consumption in DCs. The WF of DCs is estimated to be between 1047 and 151,061 m3/TJ. Outbound DC data traffic generates a WF of 1–205 liters per gigabyte (roughly equal to the WF of 1 kg of tomatos at the higher end). It is found that, typically, energy consumption constitues by far the greatest share of DC WF, but the level of uncertainty associated with the WF of different energy sources used by DCs makes a comprehensive assessment of DCs’ water use efficiency very challenging. Much better understanding of DC WF is urgently needed if a meaningful evaluation of this rapidly spreading service technology is to be gleaned and response measures are to be put into effect.

Description: This study investigated the capability of a biosurfactant produced by a novel strain of Bacillus salmalaya to enhance the biodegradation rates and bioavailability of organic contaminants. The biosurfactant produced by cultured strain 139SI showed high physicochemical properties and surface activity in the selected medium. The biosurfactant exhibited a high emulsification index and a positive result in the drop collapse test, with the results demonstrating the wetting activity of the biosurfactant and its potential to produce surface-active molecules. Strain 139SI can significantly reduce the surface tension (ST) from 70.5 to 27 mN/m, with a critical micelle concentration of 0.4%. Moreover, lubricating oil at 2% (v/v) was degraded on Day 20 (71.5). Furthermore, the biosurfactant demonstrated high stability at different ranges of salinity, pH, and temperature. Overall, the results indicated the potential use of B. salmalaya 139SI in environmental remediation processes.

Description: Objective: To evaluate the outcome of 80 pregnant women with systemic lupus erythematosus (SLE) and explore the risk factors for lupus flare, obstetric complications and fetal loss. Methods: 83 pregnancies in 80 women were divided into three groups. Group A: patients in remission for > 6 months before pregnancy, proteinuria 〈 0.5 g per day, without renal failure and discontinuation of cytotoxic drugs for > one year; Group B: patients with SLE disease activity in the six months before pregnancy; Group C: patients with new onset SLE during pregnancy. Results: In group A, 76.47% pregnancies achieved full-term deliveries and 80.39% achieved live born infants. In group B and C, the outcome was poor. Among 62 patients (64 pregnancies) diagnosed as SLE before pregnancy, SLE flares occurred in 27 (42.19%) pregnancies. SLE disease activity in the six months before pregnancy was significantly associated with lupus flare (OR 5.00, 95% CI 1.14–21.87, p = 0.03) and fetal loss. New onset lupus during pregnancy was independently associated with obstetric complications (OR 7.22, 95% CI 2.14–24.38, p = 0.001). Conclusions: The current study confirmed the previous report that SLE should be considered a high risk of pregnancy. If pregnancy is planned after remission for > 6 months, the favorable outcome can be achieved.

Description: Purpose: To determine the epidemiological characteristics of work-related eye injury in representative southwest region of China. Methods: Patients with eye injuries treated at the Ninth People’s Hospital of Chongqing from 1 January 2014 to 31 December 2014 were included in the current study. All patients completed a comprehensive examination and interview. Demographic characteristics and injury details were recorded. The International Classification of Diseases (ICD-10) and Birmingham Eye Trauma Terminology (BETT) were used. Results: The average age of eye injury patients was 37.52 years and the majority were male. Among the 1055 total patients, approximately 42.9% of the injuries were work-related. The highest proportion of occupational eye trauma was observed in the group between 36 and 45 years of age. Occupational ocular trauma occurred more frequently in summer, with most from 16:00 to 18:00. Metal was the most common injury cause. Foreign body on external eye was the most common diagnosis. Workers in the manufacturing industry without pre-work safety training or eye protection were far more likely to suffer from occupational ocular trauma than those with training and protection. Conclusions: This study provides insight into the epidemiological characteristics of occupational ocular trauma in southwest region of China. The current findings might be considered as a baseline for future research on regional work-related eye injuries. Our findings will provide valuable information for further development of preventive strategies.

Description: This paper reports on a study of the modelling, validation and analysis of an integrated 1 MW (electrical output) tri-generation system energized by solar energy. The impact of local climatic conditions in the Mediterranean region on the system performance was considered. The output of the system that comprised a parabolic trough collector (PTC), an organic Rankine cycle (ORC), single-effect desalination (SED), and single effect LiBr-H2O absorption chiller (ACH) was electrical power, distilled water, and refrigerant load. The electrical power was produced by the ORC which used cyclopentane as working fluid and Therminol VP-1 was specified as the heat transfer oil (HTO) in the collectors with thermal storage. The absorption chiller and the desalination unit were utilize the waste heat exiting from the steam turbine in the ORC to provide the necessary cooling energy and drinking water respectively. The modelling, which includes an exergetic analysis, focuses on the performance of the solar tri-generation system. The simulation results of the tri-generation system and its subsystems were produced using IPSEpro software and were validated against experimental data which showed good agreement. The tri-generation system was able to produce about 194 Ton of refrigeration, and 234 t/day distilled water.

Description: We present a brief overview of some key concepts in the theory of generalized complex manifolds. This new geometry interpolates, so to speak, between symplectic geometry and complex geometry. As such it provides an ideal framework to analyze thermodynamical fluctuation theory in the presence of gravitational fields. To illustrate the usefulness of generalized complex geometry, we examine a simplified version of the Unruh effect: the thermalising effect of gravitational fields on the Schroedinger wavefunction.

Description: In modern industrial processes, it is easier and less expensive to configure alarms by software settings rather than by wiring, which causes the rapid growth of the number of alarms. Moreover, because there exist complex interactions, in particular the causal relationship among different parts in the process, a fault may propagate along propagation pathways once an abnormal situation occurs, which brings great difficulty to operators to identify its root cause immediately and to take proper actions correctly. Therefore, causality detection becomes a very important problem in the context of multivariate alarm analysis and design. Transfer entropy has become an effective and widely-used method to detect causality between different continuous process variables in both linear and nonlinear situations in recent years. However, such conventional methods to detect causality based on transfer entropy are computationally costly. Alternatively, using binary alarm series can be more computational-friendly and more direct because alarm data analysis is straightforward for alarm management in practice. The methodology and implementation issues are discussed in this paper. Illustrated by several case studies, including both numerical cases and simulated industrial cases, the proposed method is demonstrated to be suitable for industrial situations contaminated by noise.

Description: Context aware applications, which can adapt their behaviors to changing environments, are attracting more and more attention. To simplify the complexity of developing applications, context aware middleware, which introduces context awareness into the traditional middleware, is highlighted to provide a homogeneous interface involving generic context management solutions. This paper provides a survey of state-of-the-art context aware middleware architectures proposed during the period from 2009 through 2015. First, a preliminary background, such as the principles of context, context awareness, context modelling, and context reasoning, is provided for a comprehensive understanding of context aware middleware. On this basis, an overview of eleven carefully selected middleware architectures is presented and their main features explained. Then, thorough comparisons and analysis of the presented middleware architectures are performed based on technical parameters including architectural style, context abstraction, context reasoning, scalability, fault tolerance, interoperability, service discovery, storage, security & privacy, context awareness level, and cloud-based big data analytics. The analysis shows that there is actually no context aware middleware architecture that complies with all requirements. Finally, challenges are pointed out as open issues for future work.

Description: Few techniques for guaranteeing a network lifetime have been proposed despite its great impact on network management. Moreover, since the existing schemes are mostly dependent on the combination of disparate parameters, they do not provide additional services, such as real-time communications and balanced energy consumption among sensor nodes; thus, the adaptability problems remain unresolved among nodes in wireless sensor networks (WSNs). To solve these problems, we propose a novel fuzzy logic model to provide real-time communication in a guaranteed WSN lifetime. The proposed fuzzy logic controller accepts the input descriptors energy, time and velocity to determine each node’s role for the next duration and the next hop relay node for real-time packets. Through the simulation results, we verified that both the guaranteed network’s lifetime and real-time delivery are efficiently ensured by the new fuzzy logic model. In more detail, the above-mentioned two performance metrics are improved up to 8%, as compared to our previous work, and 14% compared to existing schemes, respectively.

Description: We propose an autonomous self-aware and adaptive fault-tolerant routing technique (ASAART) for wireless sensor networks. We address the limitations of self-healing routing (SHR) and self-selective routing (SSR) techniques for routing sensor data. We also examine the integration of autonomic self-aware and adaptive fault detection and resiliency techniques for route formation and route repair to provide resilience to errors and failures. We achieved this by using a combined continuous and slotted prioritized transmission back-off delay to obtain local and global network state information, as well as multiple random functions for attaining faster routing convergence and reliable route repair despite transient and permanent node failure rates and efficient adaptation to instantaneous network topology changes. The results of simulations based on a comparison of the ASAART with the SHR and SSR protocols for five different simulated scenarios in the presence of transient and permanent node failure rates exhibit a greater resiliency to errors and failure and better routing performance in terms of the number of successfully delivered network packets, end-to-end delay, delivered MAC layer packets, packet error rate, as well as efficient energy conservation in a highly congested, faulty, and scalable sensor network.

Description: The development of public transit systems that are accessible and safe for everyone, including people with special needs, is an objective that is justified from the civic and economic points of view. Unfortunately, public transit services are conceived for people who do not have reduced physical or cognitive abilities. In this paper, we present an intelligent public transit system by highway with the goal of facilitating access and improving the safety of public transit for persons with special needs. The system is deployed using components that are commonly available in transport infrastructure, e.g., sensors, mobile communications systems, and positioning systems. In addition, the system can operate in non-urban transport contexts, e.g., isolated rural areas, where the availability of basic infrastructure, such as electricity and communications infrastructures, is not always guaranteed. To construct the system, the principles and techniques of Ubiquitous Computing and Ambient Intelligence have been employed. To illustrate the utility of the system, two cases of services rendered by the system are described: the first case involves a surveillance system to guarantee accessibility at bus stops; the second case involves a route assistant for blind people.

Description: An accurate performance analysis on the MDL criterion for source enumeration in array processing is presented in this paper. The enumeration results of MDL can be predicted precisely by the proposed procedure via the statistical analysis of the sample eigenvalues, whose distributive properties are investigated with the consideration of their interactions. A novel approach is also developed for the performance evaluation when the source number is underestimated by a number greater than one, which is denoted as “multiple-missed detection”, and the probability of a specific underestimated source number can be estimated by ratio distribution analysis. Simulation results are included to demonstrate the superiority of the presented method over available results and confirm the ability of the proposed approach to perform multiple-missed detection analysis.

Description: As society has developed, the number of vehicles has increased and road conditions have become complicated, increasing the risk of crashes. Therefore, a service that provides safe vehicle control and various types of information to the driver is urgently needed. In this study, we designed and implemented a real-time traffic information system and a smart camera device for smart driver assistance systems. We selected a commercial device for the smart driver assistance systems, and applied a computer vision algorithm to perform image recognition. For application to the dynamic region of interest, dynamic frame skip methods were implemented to perform parallel processing in order to enable real-time operation. In addition, we designed and implemented a model to estimate congestion by analyzing traffic information. The performance of the proposed method was evaluated using images of a real road environment. We found that the processing time improved by 15.4 times when all the proposed methods were applied in the application. Further, we found experimentally that there was little or no change in the recognition accuracy when the proposed method was applied. Using the traffic congestion estimation model, we also found that the average error rate of the proposed model was 5.3%.

Description: Foot pathologies can negatively influence foot function, consequently impairing gait during daily activity, and severely impacting an individual’s quality of life. These pathologies are often painful and correspond with high or abnormal plantar pressure, which can result in asymmetry in the pressure distribution between the two feet. There is currently no general consensus on the presence of asymmetry in able-bodied gait, and plantar pressure analysis during gait is in dire need of a standardized method to quantify asymmetry. This paper investigates the use of plantar pressure asymmetry for pathological gait diagnosis. The results of this study involving plantar pressure analysis in fifty one participants (31 healthy and 20 with foot pathologies) support the presence of plantar pressure asymmetry in normal gait. A higher level of asymmetry was detected at the majority of the regions in the feet of the pathological population, including statistically significant differences in the plantar pressure asymmetry in two regions of the foot, metatarsophalangeal joint 3 (MPJ3) and the lateral heel. Quantification of plantar pressure asymmetry may prove to be useful for the identification and diagnosis of various foot pathologies.

Description: In this paper, we present the development of an infrastructure-less indoor location system (ILS), which relies on the use of a microphone, a magnetometer and a light sensor of a smartphone, all three of which are essentially passive sensors, relying on signals available practically in any building in the world, no matter how developed the region is. In our work, we merge the information from those sensors to estimate the user’s location in an indoor environment. A multivariate model is applied to find the user’s location, and we evaluate the quality of the resulting model in terms of sensitivity and specificity. Our experiments were carried out in an office environment during summer and winter, to take into account changes in light patterns, as well as changes in the Earth’s magnetic field irregularities. The experimental results clearly show the benefits of using the information fusion of multiple sensors when contrasted with the use of a single source of information.

Description: Battery energy storage systems (BESSs) have been widely used for microgrid control. Generally, BESS control systems are based on proportional-integral (PI) control techniques with the outer and inner control loops based on PI regulators. Recently, model predictive control (MPC) has attracted attention for application to future energy processing and control systems because it can easily deal with multivariable cases, system constraints, and nonlinearities. This study considers the application of MPC-based BESSs to microgrid control. Two types of MPC are presented in this study: MPC based on predictive power control (PPC) and MPC based on PI control in the outer and predictive current control (PCC) in the inner control loops. In particular, the effective application of MPC for microgrids with multiple BESSs should be considered because of the differences in their control performance. In this study, microgrids with two BESSs based on two MPC techniques are considered as an example. The control performance of the MPC used for the control microgrid is compared to that of the PI control. The proposed control strategy is investigated through simulations using MATLAB/Simulink software. The simulation results show that the response time, power and voltage ripples, and frequency spectrum could be improved significantly by using MPC.

Description: Soil water potential (Ψ) controls the dynamics of water in soils and can therefore affect greenhouse gas fluxes. We examined the relationship between soil moisture content (θ) at five different levels of water potential (Ψ = 0, −0.05, −0.1, −0.33 and −15 bar) and greenhouse gas (carbon dioxide, CO2; nitrous oxide, N2O and methane, CH4) fluxes. The study was conducted in 2011 in a silt loam soil at Freeman farm of Lincoln University. Soil samples were collected at two depths: 0–10 and 10–20 cm and their bulk densities were measured. Samples were later saturated then brought into a pressure plate for measurements of Ψ and θ. Soil air samples for greenhouse gas flux analyses were collected using static and vented chambers, 30 cm in height and 20 cm in diameter. Determination of CO2, CH4 and N2O concentrations from soil air samples were done using a Shimadzu Gas Chromatograph (GC-14). Results showed that there were significant correlations between greenhouse gas fluxes and θ held at various Ψ in the 0–10 cm depth of soil group. For instance, θ at Ψ = 0 positively correlated with measured CO2 (p = 0.0043, r = 0.49), N2O (p = 0.0020, r = 0.64) and negatively correlated with CH4 (p = 0.0125, r = −0.44) fluxes. Regression analysis showed that 24%, 41% and 19% of changes in CO2, N2O and CH4 fluxes, respectively, were due to θ at Ψ = 0 (p 〈 0.05). This study stresses the need to monitor soil water potential when monitoring greenhouse gas fluxes.

Description: A device (prototype) with a working volume of 200 L was used to deplete olive mill wastewater (OMW) of polyphenols. The OMW transformed into feedstock by means of the device was then used for feeding a lab-scale photobioreactor, just for testing the production of bioH2. The main novelty of this prototype consists in the combination of several adsorbent matrices and the exploitation of their synergic action. In this investigation, three matrices have been used: active carbon, Azolla and zeolite. The device was operated at an olive oil company located in the heart of the Chianti zone (Province of Florence, Italy). The efficiency of polyphenol removal obtained using the device was ≥96%. The multi-matrix effluent (MMeff) generated was then used to obtain three different culture broths containing 25%, 50% and 100% of MMeff, respectively. The diluted (with water) culture broths were suitable for hydrogen generation, with the highest hydrogen production rate (12.7 mL H2/Lculture/h) being obtained using 50% MMeff. The hydrogen yields were: 334 mL H2/L of MMeff, when feeding the photofermenter with pure effluent (100%); 1308 mL H2/L of MMeff, with the half-diluted effluent (50%, v/v); and 432 mL H2/L of MMeff, with the highest-diluted effluent (25%, v/v).

Description: Nutrient inputs from rivers play an important role in lake eutrophication. To compare the forms characteristics of phosphorus (P) and nitrogen (N) in rivers flowing through rural and urban areas, water samples were collected seasonally from five urban rivers and six rural rivers flowing to Lake Chaohu, China. Higher total phosphorus (TP), particulate phosphorus (PP), soluble reactive phosphorus (SRP), and dissolved nonreactive phosphorus (DNP) concentrations and SRP/TP percentages were observed in urban rivers than in rural rivers, and PP/TP and DNP/TP ratios were lower in urban rivers than in rural rivers. The concentrations of total nitrogen (TN) and all N forms other than dissolved organic nitrogen (DON) were significantly higher in urban rivers than in rural rivers. NH4+/TN levels were higher in urban rivers, whereas PN/TN and DON/TN ratios were significantly lower in urban rivers compared with rural rivers. NO3−/TN and NO2−/TN levels were similar between the two groups of rivers. TP, BD-P, and NaOH-P levels in urban river surface sediments were significantly higher than those in rural rivers. NaOH-P/TP ratios were significantly elevated in urban rivers, whereas HCl-P/TP and Res-P/TP ratios were significantly lower compared with rural rivers. Urban rivers have transferred large quantities of NH4+ and SRP into Lake Chaohu, resulting in higher TP and TN levels and NH4+/TN and SRP/TP ratios. Decreasing the input of NH4+ and SRP into urban rivers is a high priority for mitigating eutrophication and algal blooms in Lake Chaohu.

Description: Published evidence on the impact of the integration of International Board Certified Lactation Consultants (IBCLCs) for breastfeeding promotion is growing, but still relatively limited. Our study aims at evaluating the effects of adding an IBCLC for breastfeeding support in a mother and child hospital environment. We conducted a prospective study in the maternity ward of our maternal and child health Institute, recruiting 402 mothers of healthy term newborns soon after birth. The 18-month intervention of the IBCLC (Phase II) was preceded (Phase I) by data collection on breastfeeding rates and factors related to breastfeeding, both at hospital discharge and two weeks later. Data collection was replicated just before the end of the intervention (Phase III). In Phase III, a significantly higher percentage of mothers: (a) received help to breastfeed, and also received correct information on breastfeeding and community support, (b) started breastfeeding within two hours from delivery, (c) reported a good experience with the hospital staff. Moreover, the frequency of sore and/or cracked nipples was significantly lower in Phase III. However, no difference was found in exclusive breastfeeding rates at hospital discharge or at two weeks after birth.

Description: Currently, use and disposal of plastic by consumers through waste management activities in Ghana not only creates environmental problems, but also reinforces the notion of a wasteful society. The magnitude of this problem has led to increasing pressure from the public for efficient and practical measures to solve the waste problem. This paper analyses the impact of plastic use and disposal in Ghana. It emphasizes the need for commitment to proper management of the impacts of plastic waste and effective environmental management in the country. Sustainable Solid Waste Management (SSWM) is a critical problem for developing countries with regards to climate change and greenhouse gas emission, and also the general wellbeing of the populace. Key themes of this paper are producer responsibility and management of products at end of life. The paper proposes two theatrical recovery models that can be used to address the issue of sachet waste in Ghana.