ALBERT

Description: THE rare deep-sea octopod Cirrothauma murrayi Chun 1910 was first described from a single specimen caught during the Michael Sars Expedition of 1910 (ref. 1). Until now it has been caught only four more times2. We describe here three specimens of this species that were recently caught during biological cruises of RRS Discovery (Fig. 1). All of these animals, including the Discovery ones, have been caught at depths of more than 1,500 m, except one that was dip-netted through the ice of the Arctic Ocean3.

Description: THE Sierra Leone Rise, located in the east equatorial Atlantic, forms a discontinuous chain of seamounts as shallow as 2 km extending with a general NE–SW trend from near the Sierra Leone coast of Africa, to the St Paul fracture zone near the Mid-Atlantic Ridge (Fig. 1). The origin of this feature has remained a topic of discussion. Sheridan et al.1 have hypothesised that the Sierra Leone Rise is a volcanic structure formed at the beginning of the opening of the Atlantic in the early Cretaceous period. The twin features of the Sierra Leone and the Ceara Rises are probably of oceanic origin and were created 80 Myr ago or later in their present-day position with respect to Africa and South America2. The Atlantic ocean exhibits several similar aseismic structures which appear symmetrically oriented with respect to the mid-oceanic ridge, such as the Walvis–Rio Grande Rise and the Iceland Faeroes–Iceland Greenland Ridges. These structures are volcanic edifices having a composition similar to that found in their associated islands3–7. Deep sea drilling of the Ceara Rise8,9 penetrated a basaltic basement of the upper Cretaceous period (Maestrichtian) (Leg 39, Site 354). Similarly, a DSDP hole (Leg 41, Site 366) on the Sierra Leone Rise, penetrated sediments of the same period, without reaching basement10. We report here the discovery of alkali-rich volcanics in an area of the Sierra Leone Rise. The sediment overlying the rock fragments is aged ∼45 Myr.

Description: A SIMPLE model for continental basement structures at rifted continental margins comprises large fault blocks which trend approximately parallel to, and step down towards, the continental–ocean boundary (for example, see ref. 1). These blocks may be cut by faults which strike across the margin, and, in many theoretical discussions, are shown as being separated from the true oceanic crust by an intermediate zone (see transitional crust of Fig. 3, ref. 2). On many rifted margins these features are deeply buried by young sediments and cannot be stutied in detail. On Goban Spur (Fig. 1), a marginal plateau south-west of Ireland, the young sediment cover is abnormally thin, however, and we have been able to map in detail a 150 km wide continental basement fracture pattern of horsts and grabens using a simple seismic reflection system (160 inch3 air-gun and two-channel hydrophone array). We also suggest a location for the continent–ocean boundary between the Spur and Porcupine Abyssal Plain. There are few previously published data from Goban Spur relevant to our study, although valuable sampling3 and geophysical3–5 results have been obtained north and south of the area.

Description: The past 20,000 yr have witnessed tremendous climatic changes, a glacial maximum at about 18,000 yr BP and a climatic optimum centred on about 6,000 yr BP, both of which mark extreme situations for the Quaternary. This paper attempts to show that active sand dunes were extensive 18,000 yr ago. Conversely, it seems that sand dunes were generally dormant 6,000 yr ago. Thus the former textbook concept1,2 of an arid climatic optimum and a pluvially active glacial maximum is reversed.

Description: THE class Cephalopoda is represented by over 10,000 fossil species and about 1,000 living species. Almost the entire fossil record so far described consists of external or internal calcareous shells of the Ammonoidea, the Nautiloidea and some members of the Coleoidea. The subclass Coleoidea includes all but three (Nautilus spp.) of the living species of cephalopods, and is represented in the fossil record largely by the order Belemnitida which is important from the early Jurassic to the Eocene. Another coleoid order, the Sepioidea, including the living Sepia and Spirula have internal calcareous shells, and have left traces from the Upper Jurassic (Voltzia) to the present. The three remaining coleoid orders, the Teuthoidea, the Vampyromorpha and the Octopodida include all the remaining living cephalopods, comprising 29 teuthoid or squid families, one vampyromorph family and 12 octopod families.

Description: The use of alloplastic materials instead of autologous cartilage grafts offers a new perspective in craniofacial reconstructive surgery. Particularly for regenerative approaches, customized implants enable the surgeon to restore the cartilaginous framework of the ear without donor site morbidity. However, high development and production costs of commercially available implants impede clinical translation. For this reason, the usability of a low-cost 3D printer (Ultimaker 2+) as an inhouse-production tool for cheap surgical implants was investigated. The open software architecture of the 3D printer was modified in order to enable printing of biocompatible and biologically degradable polycaprolactone (PCL). Firstly, the printing accuracy and limitations of a PCL implant were compared to reference materials acrylonitrile butadiene styrene (ABS) and polylactic acid (PLA). Then the self-made PCL-scaffold was seeded with adipose-tissue derived stem cells (ASCs), and biocompatibility was compared to a commercially available PCL-scaffold using a cell viability staining (FDA/PI) and a dsDNA quantification assay (PicoGreen). Secondly, porous and solid patient-customized ear constructs were manufactured from mirrored CT-imagining data using a computer-assisted design (CAD) and computer-assisted manufacturing (CAM) approach to evaluate printing accuracy and reproducibility. The results show that printing of a porous PCL scaffolds was possible, with an accuracy equivalent to the reference materials at an edge length of 10 mm and a pore size of 0.67 mm. Cell viability, adhesion, and proliferation of the ASCs were equivalent on self-made and the commercially available PCL-scaffolds. Patient-customized ear constructs could be produced well in solid form and with limited accuracy in porous form from all three thermoplastic materials. Printing dimensions and quality of the modified low-cost 3D printer are sufficient for selected tissue engineering applications, and the manufacturing of personalized ear models for surgical simulation at manufacturing costs of EUR 0.04 per cell culture scaffold and EUR 0.90 (0.56) per solid (porous) ear construct made from PCL. Therefore, in-house production of PCL-based tissue engineering scaffolds and surgical implants should be further investigated to facilitate the use of new materials and 3D printing in daily clinical routine.

Description: Macadamia (Macadamia integrifolia) is endemic to eastern Australia and produces an edible nut that is widely cultivated in commercial orchards globally. A survey of fungi associated with the grey and green mold symptoms of macadamia flowers found mostly species of Botrytis (Sclerotiniaceae, Leotiomycetes) and Cladosporium (Cladosporiaceae, Dothideomycetes). These isolates included B. cinerea, C. cladosporioides, and unidentified isolates. Amongst the unidentified isolates, one novel species of Botrytis and three novel species of Cladosporium were delimited and characterized by molecular phylogenetic analyses. The new species are Botrytis macadamiae, Cladosporium devikae, C. macadamiae, and C. proteacearum.

Description: The spread of coronavirus disease (COVID-19) has triggered a series of responses worldwide ranging from traveling restrictions and shelter-in-place orders to lockdowns, contact tracing, social distancing, and other mitigation measures. To assist with contact tracing and ensure the safety of citizens, a significant number of mobile applications has been developed, utilizing geospatial information and proximity sensing. We perform a thorough research on seven digital databases (Appbrain, e-Health Hub, GDPRhub, “fs0c131y”, News Sites, Appstore, and Google Play), identifying a total of 160 apps regarding COVID-19 related to our research questions. The aim of this research is to identify the main categories of apps and analyze their functions based on a proposed framework of by mapping aspects that affect their functionalities regarding Services, Technology, Societal & Business, and Legal aspects. As the world comes to the new normal, the utilization of these apps might become more essential for more mobile users and developers. The new encryption protocols that are established are also in favor of this argument. Future work can utilize our framework to further examine the development, design, and adoption of such mobile applications.

Description: A basic assumption of many scientific theories on the topic of decision making is rational behaviour. However, previous authors assume the existence of behavioural biases in freight transport which impede rational decision making. Hardly any research exists on behavioural biases in freight transport. To address this gap, we carry out a systematic literature review on the influencing factors of freight mode choice and provide empirical evidence for the occurrence of behavioural biases in the logistics sector. Fifteen logistics service providers and six shippers are involved in interviews and a focus group to understand their mode choice process and derive information on the existence of behavioural biases. Several biases showed to exist in the practical decision-making process. For example, decision makers tend to avoid complex options (principle of least effort), they stick to already tried and tested options (status quo bias, zero-risk bias) and they tend to make decisions based on immediate and easily accessible information (availability bias). These biases distort the demand for sustainable freight transport. We therefore conclude with several motivational, cognitive and technological debiasing strategies to reduce the negative impact of behavioural biases in freight transport.

Description: Regional climate change assessments show a likely temperature increase that is higher than the global average for all seasons in Africa, which would have extreme negative implications for ecosystem health and productivity. Most extreme climate change effects in West Africa are predicted to occur in desert and grassland areas. It is important for smallholder farmers in this region to understand the implications of these projections to their livelihood and to identify appropriate adaptation strategies. A grazing game was used to explore gender-specific adaptive responses to climate variability in the semiarid region of Ghana. The game was designed to understand the decision-making processes that result in the overgrazing of animals, leading to desertification based on the players’ interactions with the environment. A total of 44 grazing games comprising 22 games for male-headed households (HH) and 22 games for female-HH were played from August to December 2014 from 14 communities within the Bolgatanga Municipality and the Bongo district. The study revealed that males migrate to the southern part of the country to work on other people’s farms during the dry season as an adaptation strategy, while females engage in off-farm activities such as shea-butter production and basketry. Results of the game showed that males produced the highest number of cattle but created the largest desert patches. Females, on the other hand, were more conscious about the environment (long-term condition of the rangeland) than the short-term income benefits from the sale of cattle; hence, they created fewer desert patches. Strategies such as reducing the number of cattle to allow for the re-growth of vegetation in periods of feed scarcity, ploughing for one another using bulls, and family support using income from the sale of livestock were employed by both gender groups. The involvement of female farmers in decision-making is crucial to improve natural resource management.