ALBERT

Description: On February 6, 2023, at 01 : 17 UTC, a M = 7 8 earthquake struck the southern area of Turkey near Gaziantep town and was followed by a second earthquake of M = 7 5 at 10 : 24 UTC with the epicenter in Elbistan city. Both events were associated with the Anatolian Fault System and have claimed over 50,000 victims, as reported by the Disaster and Emergency Management Authority, and caused serious damage in the regions of southern Turkey and northern Syria. Seismic waves related to strong Turkey earthquakes have been recorded both by seismic stations throughout the globe and on other devices such as the ground deformation (GNSS, strainmeters, or tiltmeters) networks. In this paper, we show and analyze the earthquake signals recorded by bore-hole tilt stations that monitor seismic and volcanic activities at Mt. Etna. Tilt stations showed very large variations, despite their distance from the epicenter (approximately 1950 km) with a period between 10 and 25 seconds. We compared tilt and seismic data for a co–located station evidencing a very similar waveform that highlight how tiltmeters respond to translational acceleration rather than ground tilt during a teleseism, suggesting that, for waves with this period, they may behave as horizontal seismometers. By using these signals, we evidence the different behaviors of two of the most used models of tiltmeters on volcanoes (Lily and Pinnacle) and how they are useful for instrument calibration.

Description: Published

Description: 9030495

Description: OSV3: Sviluppo di nuovi sistemi osservazionali e di analisi ad alta sensibilità

Description: JCR Journal

Description: The Timpe Fault System (TFS) represents the source of shallow earthquakes that strike numerous towns and villages on Mt. Etna’s eastern flank. In the last 40 years, three destructive seismic events reached (heavily damaging) in 1984 (October 25), 2002 (October 29), and 2018 (December 26). These events followed a few days after the occurrence of strong seismic swarms and the sudden acceleration of the eastern flank seaward. The damaging seismic events in 2002 and 2018 were associated with dike intrusions and eruptions of the volcano; however, no eruptive activity was observed at the time of the 1984 earthquakes. In this study, we investigate seismic parameters for the 1984 sequence, in order to interpret the seismicity in terms of volcanic activity. Parameters such as localization, cumulative seismic moment, and hourly occurrence frequency of the 1984 seismic swarm have been analysed and shown to have typical values of Mt. Etna’s intrusive seismic swarms. This suggests that the 1984 episode may have been an aborted intrusive magma episode that triggered similar processes (long and powerful intrusions with acceleration of the eastern flank movement and destructive earthquakes), as in 2002 and 2018. These three episodes suggest that an evaluation of some seismic parameters during future intrusive swarms may furnish indications of a possible reactivation of the TFS.

Description: Published

Description: 8565536

Description: 6V. Pericolosità vulcanica e contributi alla stima del rischio

Description: JCR Journal

Description: © The Author(s), 2012. This article is distributed under the terms of the Creative Commons Attribution License. The definitive version was published in International Journal of Distributed Sensor Networks 2012 (2012): 191235, doi:10.1155/2012/191235.

Description: In recent years, there has been significant concern about the impacts of offshore oil spill plumes and harmful algal blooms on the coastal ocean environment and biology, as well as on the human populations adjacent to these coastal regions. Thus, it has become increasingly important to determine the 3D extent of these ocean features (“plumes”) and how they evolve over time. The ocean environment is largely inaccessible to sensing directly by humans, motivating the need for robots to intelligently sense the ocean for us. In this paper, we propose the use of an autonomous underwater vehicle (AUV) network to track and predict plume shape and motion, discussing solutions to the challenges of spatiotemporal data aliasing (coverage versus resolution), underwater communication, AUV autonomy, data fusion, and coordination of multiple AUVs. A plume simulation is also developed here as the first step toward implementing behaviors for autonomous, adaptive plume tracking with AUVs, modeling a plume as a sum of Fourier orders and examining the resulting errors. This is then extended to include plume forecasting based on time variations, and future improvements and implementation are discussed.

Description: This research was made with Government support under and awarded by DoD, Air Force Office of Scientific Research, National Defense Science and Engineering Graduate (NDSEG) Fellowship, 32 CFR 168a.

Description: Identifying key classes can help software maintainers quickly understand software systems. The existing key class recognition algorithms consider the weight of class interaction, but the weight mechanism is single or arbitrary. In this paper, the multitype weighting mechanism is considered, and the key classes are accurately identified by using four kinds of interaction. By abstracting the software system into the directed weighted class interaction network, a novel Structure Entropy Weighted LeaderRank of identifying key classes algorithm is proposed. First, considering multiple types and directions of interactions between every pair of classes, the directed weighted class interaction software network (DWCIS-Network) is built. Second, Class Entropy of each class is initialized by the software structural entropy in DWCIS-Network; the Structure Entropy Weighted LeaderRank applies the biased random walk process to iterate Class Entropy. Finally, the iteration is completed to obtain the Final Class Entropy (FCE) of each class as the importance score of each class, top-k classes are obtained, and key classes are identified. For two sets of experiments on Ant and JHotDraw, our approach effectively identifies key classes in class-level software networks for different top-k of classes, and the recall rates of our approach are the highest, 80% and 100%, respectively. From top-15% to top-5%, the precision of our approach is improved by 13.39%, which is the highest in comparison with the precisions of the other two classical approaches. Compared with the best performance of the two classical approaches, the RankingScore of our approach is improved by 16.51% in JHotDraw.

Description: The steel industry is facing problems such as serious environmental pollution and high resource consumption. At the same time, it lacks effective methods to quantify potential environmental impacts. The purpose of this work is to conduct a specific environmental analysis of steelmaking production in steel plants. The ultimate goal is to discover the main pollution of steelmaking and identify potential options for improving the environment. This paper uses life cycle assessment method to carry out inventory and quantitative analysis on the environmental impact of steelmaking system. Through analysis, the hazards are divided into four major categories, which are human health, climate change, ecosystem quality, and resources. The results show that molten iron has the greatest impact on human health, followed by the greatest impact on resources. The impact of scrap steel on human health ranks third. Molten iron is a key process that affects human health, climate change, ecosystems quality, and resources. In addition, processes such as fuels, working fluids, and auxiliary materials also cause certain environmental damage, accounting for a relatively small proportion. Optimizing the utilization of scrap steel and molten iron resources and improving the utilization efficiency of resources and energy are helpful to reduce the environmental hazards of steelmaking system.

Description: Background. Increasing evidence states that the plasma lipoprotein-associated phospholipase A2 (Lp-PLA2) levels and apolipoprotein particles are regarded as the risk maker for cardiovascular heart disease. Nevertheless, the issue about whether Lp-PLA2 is associated with apolipoprotein particles in individuals who have been diagnosed as stable coronary artery disease (CAD) remains largely unexplored. Method. All 569 participants engaged in this research, who never took lipid-lowering drugs, had been divided into groups by the coronary angiography (CAG), namely, stable CAD: n=291; non-CAD: n=278. The results concerning Lp-PLA2 levels were calculated by Elisa Kit, while apolipoprotein particles were measured by the department of laboratory. Results. The plasma concentration of Lp-PLA2 was remarkably higher in stable CAD group than the non-CAD group (136.0±60.5 ng/mL vs. 113.2±65.6 ng/mL, P

Description: The study was conducted in Kafta Sheraro National Park (KSNP) dry woodland natural forest located in Kafta Humera and Tahitay Adiyabo weredas (districts), Western and Northwestern Zones of Tigray regional governmental state, North Ethiopia. The objective of the study was to explore the floristic composition, structure, and regeneration of woody species in the home of Loxodonta africana L., Hippotragus equinus, Anthropoides virgo, Ourebia ourebi, Crocuta crocuta, Tragelaphus strepsiceros, Phacochoerus africanus, and unidentified crocodile and fish species. In the park, the vegetation ecology has not been studied up to date which is necessary for conservation. The systematic sampling technique was used to collect vegetation and human disturbance (presence and absence) data from August to December 2018. The vegetation data were collected from 161 plots each with a size of 400 m2 (20 m × 20 m) for tree/shrub while subplots of size 100 m2 (10 m × 10 m) and 25 m2 (5 m × 5 m) for sapling and seedling, respectively, were established in the main plots. Individual tree and shrub diameter at breast height (DBH) ≥2.5 cm and height ≥ 2 m were measured using tape meter and clinometer, respectively. Diameter at breast height (DBH), frequency, density, basal area, and importance value index (IVI) were used for vegetation structure description while the density of mature trees, sapling, and seedling was used for regeneration. A total of 70 woody species (46 (65.7%) trees, 18 (25.7%) shrubs, and 6 (8.6%) tree/shrub) were identified. The total basal area and density of 79.3 ± 4.6 m2·ha−1 and 466 ± 12.8 stems·ha−1, respectively, were calculated for 64 woody species. Fabaceae was the most dominant family with 16 species (22.9%) followed by Combretaceae with 8 species (11.4%). The most dominant and frequent species throughout the park were Acacia mellifera, Combretum hartmannianum, Terminalia brownii, Balanites aegyptiaca, Dichrostachys cinerea, Acacia senegal, Acacia oerfota, Boswellia papyrifera, Ziziphus spina-christi, and Anogeissus leiocarpus. Abnormal patterns of selected woody species were dominantly identified. The regenerating status of all the woody plant species was categorized as “fair” (18.75%), “poor” (7.81%), and “none” (73.44%). There was a significant correlation between altitude, anthropogenic disturbance (grazing and fire frequency), and density of seedling, sapling, and mature trees. But there was no correlation between gold mining and regeneration population. However, there is a good initiation for the conservation of the park; still, the vegetation of the park was threatened by human-induced fire following intensive farming, gold mining, and overgrazing. Therefore, the study area was the habitat for the population of the African elephant; species with low importance value indices and lack or having few seedling and sapling stage should be prioritized for conservation, and their soil seed banks should be studied further.

Description: The weapon target assignment (WTA) is a classical problem of defense-related applications which is proved to be a NP-complete problem. In this paper, a practical and available dynamic weapon target assignment (DWTA) formulation is given which incorporates two meaningful and conflicting objectives, that is, minimizing weapon costs and maximizing combat benefits. As we know, heuristic methods have some shortcomings such as slow convergence speed and local optimum in solving the nonlinear integer optimization problem. To this end, a novel DWTA algorithm based on cross-entropy (CE) method is introduced, where the resources requirement condition for targets is taken into consideration. The CE method associates an estimation problem with the DWTA optimization problem, and then, the estimation problem is transformed into a convex optimization problem. The Karush–Kuhn–Tucker conditions are applied to solve the convex optimization problem, and the iteration formulas to find the optimal solution are deducted. Furthermore, in order to verify the performance of CE method in dealing with the DWTA problem, several simulations in different combat scenarios are implemented. The results reveal that, compared with the benchmark heuristic and Monte-Carlo (MC) methods, there are some notable advantages in solving the DWTA problem based on CE method with regard to the solution quality and time consumption.

Description: In this paper we present one year of meteorological and flux measurements obtained near Ny-Ålesund, Spitsbergen. Fluxes are derived by the eddy covariance method and by a hydrodynamic model approach (HMA) as well. Both methods are compared and analyzed with respect to season and mean wind direction. Concerning the wind field we find a clear distinction between 3 prevailing regimes (which have influence on the flux behavior) mainly caused by the topography at the measurement site. Concerning the fluxes we find a good agreement between the HMA and the eddy covariance method in cases of turbulent mixing in summer but deviations at stable conditions, when the HMA almost always shows negative fluxes. Part of the deviation is based on a dependence of HMA fluxes on friction velocity and the influence of the molecular boundary layer. Moreover, the flagging system of the eddy covariance software package TK3 is briefly revised. A new quality criterion for the use of fluxes obtained by the eddy covariance method, which is based on integral turbulence characteristics, is proposed.

Description: Drop size spectra were measured by using an optical disdrometer of type ODM 470 at 2 different locations. They were subdivided in four data sets: measurements over land, in 3 coastal areas, over semi-enclosed seas, and over the open sea. Based on 1 minute 4 measurement intervals no differences were found in drop size spectra between continental and 5 maritime areas. An exponential model with a rain rate depending interception number and 6 pre-factor in the exponent fits well the spectra, maximum drop sizes depend strongly on 7 estimated rain rates. In contrast to other investigations there are no significant differences 8 between spectra of convective and stratiform rain based on 1 minute measurement intervals. 9 However, spectra integrated over 10 minutes show the expected differences.