ALBERT

Notes: We studied the use of mineland wetlands by birds and the relationship between avian communities and wetland characteristics. Data were collected from 20 wetlands in Pike County, Indiana, and included wetland size, depth, water conductivity and salinity, aquatic macroinvertebrate abundance, vegetation, and bird use. Principal component analysis showed that physical variables could be explained by two principal component scores and that wetlands could be grouped on the basis of size and conductivity. Principal component analysis could not reduce vegetation variables to fewer principal component scores, meaning that wetland vegetation characteristics were independent of one another and did not show any trend. Most wetlands had low invertebrate density, and wetlands with higher invertebrate density had low invertebrate diversity. Wetlands with similar habitat characteristics (physical, vegetative, and invertebrate) did not necessarily show similarities in bird assemblages. Bird similarity index values ranged from 0 to 59%, implying that each wetland has its own bird community. Stepwise multiple regression analysis (α= 0.05) relating bird use and habitat characteristics showed that bird species richness increased with the species richness of submergent vegetation and was correlated negatively with the species richness of emergent vegetation. There was no significant relationship between bird species richness or bird species diversity and wetland size. The number of species within different avian guilds correlated with different habitat characteristics. The species richness of submergent plants was a factor that correlated positively with the number of species of several guilds (dabblers, wading birds, and plunge divers). Wetland age was not a factor that determined bird use.

Notes: Grass seeding is widely used for erosion control, but its consequences for soil and regeneration following fire have been measured only infrequently. This study investigates the effect of grass seeding on the type and extent of plant cover; soil moisture percentage; and moisture stress, survival, growth, and root-tip and mycorrhiza formation of Pinus lambertiana (sugar pine) seedlings in a clearcut intensely burned by wildfire. One-year-old containerized sugar pine seedlings were planted in seeded and nonseeded areas in Spring 1988 and 1989 in the Longwood Fire area of southwest Oregon. In 1988, tree seedlings in grass-seeded plots experienced intense competition from the grass, reduced root-tip and mycorrhiza formation, low levels of soil moisture to meet evapotranspirational demand, high levels of mortality, and reduced growth. In 1989, however, the opposite was true: tree seedlings in nonseeded plots experienced competition from invading native annuals and perennials, low levels of soil moisture in summer, and higher levels of mortality. The studies we report here further indicate that, in an area characterized by extended summer drought, annual ryegrass impeded regeneration of sugar pine during the first season following the fire. Native species cover and richness have been significantly reduced in the seeded area and may affect long-term soil stability, productivity, and conifer restoration. Seeding of annual ryegrass at high rates under these conditions would seem ill advised.

Notes: Books reviewed in this article: Reintegrating Fragmented Landscapes towards Sustainable Production and Nature Conservation. R. J. Hobbs and D. A. Saunders. editors Restoring Acid Waters: Loch Fleet 1984–1990. G. Howels, and T.R.K. Dalziel, editors

Notes: In prairie restoration, use of seeds from nonlocal sources has been of concern to restorationists. We examined the specificity between vesicular-arbuscular mycorrhizal fungi obtained from a single location and little bluestem obtained from three localities. Seed was obtained from three sources: (1) a commercial seed supplier in Nebraska, (2) Sand Ridge State Forest (SRSF), Mason County, Illinois, the site from which the experimental soil containing the mycorrhizal inoculum was obtained, and (3) Sand Prairie Scrub Oak Nature Preserve (SPSO), 32 km southwest of SRSF. Plants were grown in three substrates: (1) autoclaved soil, (2) autoclaved soil to which a mycorrhizal fungal-free sieving of nonautoclaved soil was added, and (3) nonautoclaved soil. All plants grown in nonautoclaved soil were colonized by mycorrhizal fungi, whereas none of those grown in other substrates were colonized. Plants grown from SRSF seeds produced significantly (p 〈 0.05) more biomass than those grown from Nebraska seeds (X̄± SE, SRSF = 0.54 ± 0.04 g, SPSO = 0.49 ± 0.03 g, Nebraska = 0.37 ± 0.03 g). Plants grown in nonautoclaved soil, regardless of seed source, produced less biomass (0.27 ± 0.02 g) than plants grown in autoclaved soil (0.58 ± 0.03 g) or autoclaved soil plus sievings (0.59 ± 0.03 g).The results provide no clear indication of a host-endophyte specificity. However, the data suggest that the local genotypes of S. scoparium are better adapted to their native soil environment than are genotypes from other localities.

Notes: This essay reviews the recent attempts by the Northwest Power Planning and Conservation Council (NPPC) to conserve and restore wild salmon lost to hydroelectric development along the Columbia River and its tributaries. The restoration of the wild salmon is predicated on cooperation between myriad stakeholders in a planning process that includes the NPPC, 11 state and federal agencies, 13 Indian tribes, 8 utilities, and numerous interest groups. The two goals of the essay are (1) to review the recent amendments to the NPPC's fish and wildlife program, and (2) to describe the political barriers to restoration versus restocking of wild salmon in the Columbia River. The failure of political and administrative entities to deal with the problem of restoring wild salmon may result in drastic requirements being imposed by the imperatives of the Endangered Species Act.

Notes: An environmental revolution is urgently needed that will lead to a post-industrial symbiosis between man and nature. This can be realized only if the present unrestrained biological impoverishment and neotechnological landscape degradation are replaced by the creation of healthy and attractive landscapes. Restorationists can fulfill a vital role in this process. They must broaden their scales from biodiversity restoration in small, protected nature islands to the large-scale restoration of natural and cultural landscapes. To achieve this they must restore not only the patterns of vegetation but also the processes that create these patterns, including human land uses. Their goal should be to restore the total biological, ecological, and cultural landscape diversity, or “ecodiversity,” and its intrinsic and instrumental values of highly valuable, endangered seminatural, agricultural and rural landscapes. For this purpose it is essential to maintain and restore the dynamic flow equilibrium between biodiversity, ecological, and cultural landscape heterogeneity, as influenced by human land uses, which occur at different spatial and temporal scales and intensities. Recent advances in landscape ecology should be utilized for broader assessment of ecodiversity, including proposed indices of ecodiversity, new techniques such as Intelligent Geographical Information Systems (IGIS), and Green Books for the holistic conservation and restoration of valuable endangered landscapes. Restoration ecology can make an important contribution to an urgently needed environmental revolution. This revolution should lead to a new symbiosis between man and nature by broadening the goal of vegetation restoration to ecological and cultural landscape restoration, and thereby to total landscape ecodiversity.

Notes: A study of spider (Araneae) communities was conducted in rehabilitated bauxite mines at the Jarrahdale mine site of Alcoa of Australia Ltd. and in the nearby native jarrah (Eucalyptus marginata) forest in southwest Western Australia. The study was conducted from March to August 1993 in five rehabilitated sites of different age and method of rehabilitation and in two forest sites. A variety of collection methods was used, including pitfall trapping, litter sampling, sweep netting, tree beating, and visual searching. These methods were the same as those carried out in a previous study of some of these areas in 1983. We collected 151 spider species belonging to 102 genera and 34 families. We examined the relationship between various habitat features, including the age and method of rehabilitation, of the spider communities present. It was found that leaf litter depth and cover and vegetation density had a significant positive influence on recolonization by the various spider guilds. The age and method of rehabilitation were found to influence different vegetational and habitat features; these, in turn, influenced the spider communities. Thus, the older a rehabilitated site the greater the species richness of both plants and spiders. We compared these results with those of the 1983 study to determine the spider succession of the aging rehabilitation. The spider communities and guild composition were found to change as the vegetation matured, from a dominance of pioneer species to a community of species requiring less harsh conditions. By comparison with the pre-1983 rehabilitation, the latest method of rehabilitation increased the rate of recolonization by both plants and spiders.

Notes: Peak flowering activity among woody species in the tropical dry forests of St. John, U.S. Virgin Islands, coincided with the brief spring rainy season but continued at moderate levels for six months, abating with the autumn rains. Fruit maturation showed a major peak in the long winter dry season and a minor crest during the summer dry season. Seeds of wind-dispersed species disseminated mainly during the winter dry season, while animal dispersal of seeds (74% of all woody species) followed the bimodal pattern (for wet and dry seasons) described for the community as a whole. Under shadehouse conditions, most dry forest tree species germinated well (〉 80%) and emerged promptly (within four weeks of planting) and synchronously (90% emergence within a four-week interval). Nine of 29 species tested in the shadehouse manifested dormancy of at least six weeks. Seed germinability varied among tree species, and the viability of most species began to decline following six months of dry storage. Few species retained high germinability after nine months of dry storage. The species composition of soil seed banks did not correspond closely with above-ground communities on three forested sites of varying stand age. In the youngest stand (35 years old), dominated by the weedy, arborescent legume Leucaena leucocephala, the soil seed bank was also dominated by this species, but no seeds of any other tree species were found in the soil samples. Seeds of native trees were scarcely encountered (only one indigenous species) in soil seed bank samples of three forest sites. Local seed rain from less disturbed forest may not be sufficient for prompt recovery of the dry forest community on degraded sites.

Notes: Glasshouse trials, using trickle irrigation and increasing levels of NaOH-induced alkalinity, identified species that could be expected to tolerate the high-pH conditions of bauxite processing waste residue sites. Of 29 taxa tested, the most tolerant were Casuarina obesa, Melaleuca lanceolata, M. armillaris, M. nesophila, Eucalyptus loxophleba, E. halophila, E. platypus, Tamarix aphylla, and a particular clone of E. camaldulensis; E. spathulata, E. tetragona, E. preissiana, E. gomphocephala, E. diptera, and E. occidentalis proved to be relatively sensitive to severe alkaline conditions. Tolerance appeared to relate to an ability to maintain root membrane function, nutrient uptake balance, and ultimately root tissue structure while under increasing levels of alkalinity stress. Species normally inhabiting alkaline soils tended to have increased growth rates in nutrient irrigation conditions between pH 8 and 10 compared with control plants irrigated with nutrient solutions of pH values near 7.4. However, once the irrigation solutions reached pH 12 and the buffering capacity of the soil appeared to be exceeded, the condition of susceptible plants rapidly declined and death followed. Sensitive plants initially showed symptoms related to nutrient deficiency, followed by wilting and death as the root systems failed. Field trial conditions in the bauxite residue impoundments at Kwinana, Western Australia, include soils with pH values as high as 11.00. In general, the relative survival and growth of seedlings after eight months were predicted by the response under glasshouse trial conditions. Appropriately designed stress trials can be important ecological techniques in choosing species most capable of surviving difficult environmental conditions in the rehabilitation of damaged landscapes.

Notes: In ecological restoration, nonindigenous species can pose a major problem because they are often aggressive and can overwhelm native species, thus altering ecosystem structure. This article identifies the circumstances in which prospects for use of restoration technology in controlling invaders are favorable or unfavorable, the factors that make certain species good colonizers, and the characteristics that make ecosystems susceptible to invasion. It discusses prospects for using restoration technology in controlling nonindigenous species by influencing hydroperiod, photo-period, thermoperiod, edaphic conditions, and availability of biological control agents so as to produce ecological conditions that are inhospitable to invaders. The limitations of restoration are discussed, as well as specific ecological situations in which it is likely to be the method of choice for control of nonindigenous species. Use of fire, flooding, manual removal, shading, substrate removal, and herbicide application as control techniques in conjunction with restoration efforts are considered. Specific examples, including the techniques employed, indicate the potential for controlling nonindigenous species in the process of ecosystem restoration.

Notes: Adequately evaluating the success of coastal tidal marsh restoration has lagged behind the actual practice of restoring tidally restricted salt marshes. A Spartina-dominated valley marsh at Barn Island Wildlife Management Area, Stonington, Connecticut, was tidally restricted in 1946 and consequently converted mostly to Typha angustifolia. With the re-introduction of tidal flooding in 1978, much of the marsh has reverted to Spartina alterniflora. Using a geographical information system (GIS), this study measures restoration success by the extent of geographical similarity between the vegetation of the restored marsh and the pre-impounded marsh. Based on geographical comparisons among different hydrologic states, pre-impounded (1946), impounded (1976), and restored (1988) tidal marsh restoration is a convergent process. Although salt marsh species currently dominate the restored system, the magnitude of actual agreement between the pre-impounded vegetation and that of the restored marsh is only moderate. Further restoration of the salt marsh vegetation may be limited by continued tidal restriction, marsh surface subsidence, and reduced accretion rates. General trends of recovery are identified using a gradient approach and the geographic pattern’ of vegetation change. In the strictest sense, if restoration refers only to vegetation types that geographically replicate preexisting types, then only 28% of the marsh has been restored. Restoration in a broader sense, however, representing the original salt marsh vegetation regardless of spatial position, amounts to 63% restored. Unrestored marsh, dominated by Typha angustifolia and Phragmites australis, remains at 37%. By emphasizing trends during vegetation recovery, this evaluation technique aims to understand the restoration process, direct future research goals, and ultimately aid in future restoration projects.

Notes: Books reviewed in this article: The Earth in Transition: Patterns and Processes of Biotic Impoverishment. A collection of papers from a symposium held in Woods Hole, Massachusetts, October 1986. George M. Woodwell, editor Restoration of Aquatic Ecosystems: Science, Technology, and Public Policy. National Research Council.

Notes: Results are presented using vegetative shoots and bryophyte sods to restore floristically impoverished high arctic wet sedge-moss meadows that had suffered intense damage from vehicle activity during the period 1960–1967. Clonal transplants of Carex aquatilis var. stans, a native sedge, were planted with and without bryophyte sods in vehicle ruts in 1972. After nearly two decades, there was less Carex cover in the planted ruts with flowing water than in the contiguous controls. This pattern was slightly reversed in planted plots with standing water. Reinvasion of Eriophorum angustifolium occurred in treated ruts, but cover was less in both treatments than in controls in 1990. The unexpected recruitment of Eriophorum scheuchzeri from the seed bank in moss-sodded plots is discussed in terms of its local and regional importance. Total plant cover in restored ruts was nearly equal to that of controls, but biomass was somewhat less than that in control plots. Plots with bryophytes were environmentally distinct, due primarily to increases in organic mat depth relative to controls. After 18 years, restoration efforts resulted in increased plant cover in treated ruts compared to naturally recovering ruts.〈blockFixed type="quotation"〉The composition of no two patches of vegetation is precisely the same [and] neither are the seed banks. Successsion on different patches of disturebed ground in the same locality frequently proceeds quite differently because of such differences.—J. Miles, Vegetation Dynamics, 1979

Notes: In markets, in which exchange requires costly search for trading partners, intermediaries can help to reduce the trading frictions. This intuition is modeled in a framework with heterogeneous agents, who have the choice between intermediated exchange and search accompanied by some bargaining procedure. The equilibria of such a game are characterized. In the case of a monopolistic intermediary, the tradeoff between the bid-ask spread and the costs of delay during private search determine the intermediary's clientele. In equilibrium the monopolist charges a positive spread. Traders with large gains from trade prefer to deal with him, whereas traders with relatively low gains from trade engage in search. In case of competition among intermediaries, the classical Bertrand result obtains, and bid and ask prices converge to the (unique) Walrasian equilibrium price. Thus, in the confines of the model, the Walrasian auctioneer of the market under consideration can be replaced by competing intermediaries. In addition a multiplicity of subgame perfect Nash equilibria emphasizes the coordination problems inherent in models of intermediation.

Notes: In this paper we analyze the properties of price equilibria in a duopoly market where firms sell vertically differentiated products, consumers being uncertain about which firm sells which quality. Both existence and properties of price equilibria are characterized by the beliefs of the consumers' population about the distribution of quality between firms.

Notes: The survey classifies economic theories of the firm into four categories based on the level of aggregation in economic models: (1) neoclassical, (2) industrial organization, (3) contractual, and (4) organizational incentive. Economic theories of the firm are evaluated on the basis of their potential application to problems of management decision making. The survey suggests that a management perspective can be useful in developing an integrated theoretical analysis of the firm that addresses both competitive strategy and organizational design.

Notes: Commitment: The Dynamic of Strategy, by Pankaj Ghemawat.Ghemawat's Commitment makes recent results in game-theoretic industrial organization accessible and useful to practitioners in the field of strategic management. This book contributes to the management strategy literature on two levels. On a conceptual level, Ghemawat strives to isolate “commitment” as the sole explanation of persistent differences in firm performance. On a more pragmatic level, he provides a framework intended to aid managers in making commitment-intensive decisions. It is with respect to how well he achieves these two distinct goals that I evaluate Ghemawat's contribution. In addition, I review briefly the book's content, and I compare Ghemawat's approach to some alternative approaches familiar to scholars and practitioners of strategic management.

Notes: In the present paper, we relate the extent of job security offered to incumbent managers to the extent of competition among firms in the product market, where the extent of job security is measured by the probability that an incumbent manager continues to be employed by his current firm and the extent of competition is measured by the degree of differentiation between competing brands. We demonstrate that when competition between firms intensifies and “on-the-job training” is relatively more conducive to reducing the variable costs of production, firms tend to offer reduced (increased) job security to incumbent managers, provided that the degree of differentiation between competing products is sufficiently large (small), respectively. If “on-the-job training” is relatively more conducive to reducing the fixed costs of production, however, the previous result is reversed.

Notes: This paper presents a model of strategic product choice when consumer preferences combine features of both horizontal and vertical product differentiation. Consumers disagree on what amount of a “special” characteristic makes for a better product, but those who prefer more of this attribute are willing to pay more for it. Within this demand structure, I examine the advantages of first-mover firms. I find that such firms typically do best in markets where the maximum degree of product differentiation is limited by preferences rather than technology. These are “niche markets”. Follower firms do better in markets in which the range of preferences is broad relative to the span of feasible goods.

Notes: This paper reexamines Grossman and Hart's (1980) insight into how the free-rider problem excludes an external raider from capturing the increase in value it brings to R firm The inability of the raider to capture any of the surplus depends critically on the assumption of equal and indivisible shareholdings–the one-share-per-shareholder model In contrast, we show that once shareholdings are large and potentially unequal, a raider may capture a significant part of the increase in value Specifically, the free-rider problem does not prevent the takeover process when shareholdings are divisible.

Notes: We analyze the implementation problem faced by firms when trying to collude in the face of asymmetric information about costs. Assuming that transfer payments are possible, we examine the incentive compatibility and individual rationality constraints that must be satisfied by any cartel agreement. Two scenarios are considered. Firms may or may not withdraw from the agreement after each firm's costs become known. If no withdrawal is possible, we find that the monopoly rule is implementable when weak types of individual rationality constraints are required. This contrasts with some results in the literature. If withdrawal is possible, we find a potential conflict between different forms of individual rationality constraints, in particular, between interim and ex post constraints. This conflict disappears in industries with a large number of firms.

Notes: This paper offers a general characterization of the optimal product line prices for a monopolist whose quality of products is initially unknown to consumers. In the focal equilibrium, a monopolist signals a high-quality product line by pricing as if quality were known to be high, but costs of production were higher than they truly are. In a rich set of environments, this characterization implies that the prices of all products are initially distorted upward, with the price distortion being largest for products with the most inelastic demands and/or quality-sensitive production costs. These implications yield predictions for the time path of prices flint are broadly consistent with evidence from the marketing literature. The multidimensional signaling problem is made tractable by the satisfaction of a very simple and powerful single crossing property.

Notes: Managerial behavior that is rational and profit-maximizing sometimes will seem to be overly conservative. If the valuation of innovations contains white noise and the status quo would be preferred to random innovation, then any innovation that does not appear substantially better than the status quo should be rejected, for reasons arising from regression toward the mean. The more successful the firm, the higher is the optimal acceptance threshold and conservative bias. Other things equal, more successful firms will spend less on research, adopt fewer innovations, and be less likely to advance the industry's best practice.

Notes: I present an integrated survey of management strategy, which examines organizational design, competitive strategy, and public policy considerations. In addition, 1 offer suggestions on how economic analysis can be applied in unifying and developing management strategy as a field of study.

Notes: Under prospective pricing, payers for health care essentially use price regulation of hospitals as a way of indirectly regulating the provision of treatment intensity. This paper presents a theory of how a nonprofit hospital selects treatment intensities for its products given the payer's choice of prices and then determines how the payer should select prices in light of this theory. The main result is that, in equilibrium, the ratio of price to marginal cost will vary across products inversely with the elasticity of demand with respect to treatment intensity. This means that, generally, the hospital will earn positive (negative) accounting profit on products with low-(high-) intensity elasticities of demand.

Notes: Legislation to create optional no-fault insurance (ONFL) programs has recently been enacted in Florida and Virginia. ONFI programs provide compensation to patients when certain medical complications arise, provided the patient agrees not to sue the doctor for additional damages. The optimal design of ONFI programs is explored in this paper, focusing on the incentive effects of ONFI programs. The question of whether ONFI programs should be funded entirely by participating doctors, or whether social subsidies are optimal, is examined.

Notes: A number of recent Canadian and U.S. antitrust cases have involved allegations that manufacturers of durable products have refused to supply parts to independent service organizations, apparently to monopolize the market for repairs of their products. This paper provides a theory of these strategies and considers the welfare implications of judicial orders to supply. The refusals here are seen as necessary to protect manufacturers' program of price discrimination: Expensive repairs represent a way to select high-intensity, high-value users and charge them more. In addition to the usual ambiguity associated with the welfare effects of prohibitions of price discrimination, forcing competition in repairs can have the further damaging effect of reducing social welfare by inducing manufacturers to lower product quality.

Notes: The litigation crisis in this country is a subject of great importance to the chief executive officers of public uccounting firms. 1 will first address the problem's magnitude and its source and then speculate on the developments we might expect in the future. Like all forecasts, mine will certainly be wrung. I hope that my degree of error on the pessimistic side will be considerable.

Notes: Research and development (R&D) competition among firms has recently been extended to R&D competition involving research joint ventures. It was previously shown that in an industry conducting cost-reducing R&D followed by competition in the product market, if all firms both fully share R&D information and coordinate investments to maximize pint profits, final products prices are lower, and firms' profits are higher than with information shriving alone, joint profit maximization alone, or no cooperation. In this paper we question whether a single research joint venture (RJV) cartel is the best form of industry R&D coordination. We show that there are circumstances in which splitting a single RJV cartel into several competing ones yields lower product prices. Moreover, we show that in these circumstances, splitting the industry into exactly two competing RJV cartels would be best.

Notes: This paper studies the order of adoption of a process innovation, thin-slab casting, by U.S. steel makers. A game-theoretic model of technology adoption with capacity constraints indicates that incumbents are likely to trail entrants in adopting process technologies that reduce the minimal scale required to compete. Evidence from the case study also indicates, however, that the sorts of interactive effects emphasized by game-theoretic models may be dominated by the effects of competitors' heterogeneous precommitments.

Notes: Identical cases of wine are often auctioned one immediately after another. Ashenfelter (1989) reports that on average, the later lots fetch less. Such a systematic price difference seems anomalous, the more so because it is shown here that rational expectations imply not equal, but rising, prices. Risk aversion is an obvious way of reconciling the evidence with rational behavior. There is an alternative explanation. The auctions observed by Ashenfelter involved a buyer's option, whereby the first-round winner could purchase further cases at the same price. It is shown that this feature may both account for the observed price trajectory and raise seller revenue.

Notes: This paper examines the incentives for integration when the market for consumer durables (hardware) is oligopolistic and the market for complementary services (software) is monopolistically competitive. We find that the equilibrium industry structure will depend on the magnitude of the fixed costs of software development. If the software development costs are relatively large, the equilibrium industry structure is unintegrated, that is, neither hardware firm integrates; if the software development costs are relatively small, the equilibrium industry structure is integrated, that is, both hardware firms integrate. Under the integrated industry structure, hardware profits are lower, less varieties are provided, and hardware prices are lower than under the unintegrated industry structure. The game has a prisoners' dilemma structure when the software development costs are relatively small because of a foreclosure effect. Strategically increasing the number of software varieties provides an avenue for an integrated hardware firm to increase its market share and profits by reducing the number of software varieties available for an unintegrated rival technology. Although consumer surplus is higher under an integrated industry structure, the total surplus associated with the unintegrated industry structure exceeds that of the integrated industry structure.

Notes: Price setting by firms and search by customers is analyzed, relaxing two basic attributes of most search models: price precommitment and agent heterogeneity. Customers are characterized by individual demand functions for a homogeneous good and can choose to employ a threat to search. Firms noncooperatively make pricing decisions by using the individual demand curves under conditions of constant marginal cost. Firms adopt pricing rules that optimally respond to customer search histories. Bargaining power is endogenously assigned. Firms know their common marginal cost; customers, the cost distribution. The unique separating equilibrium is characterized by a lumpy distribution of prices and by heterogeneous shopping behavior by customers giving rise to “shoppers” and “nonshoppers”

Notes: Most research on product positioning supports the idea of differentiation. Product standardization (i.e., minimum differentiation) occurs only under very limiting assumptions. Yet, similar products are often observed in the marketplace. We attempt to restore the case for standardization by using more realistic assumptions than in previous work. We assume that consumers consider not only observable attributes in brand choice, but also attributes that are unobservable by the firms. We find that standardization is an equilibrium when consumers exhibit sufficient heterogeneity along the unobservable attributes under both positioning with exogenously given prices and price competition, We also show that, under insufficient heterogeneity along the unobservable attribute, our results coincide with past research that argues in favor of differentiation.

Notes: This paper proposes an empirical methodology for studying various (implicit or explicit) collusive behaviors on two strategic variables, which are price and advertising, in a differentiated market dominated by a duopoly. In addition to Nash or Stackelberg behaviors, we consider collusion on both variables, collusion on one variable and competition on the other, etc. Using data on the Coca-Cola and Pepsi-Cola markets from 1968 to 1986, full information maximum likelihood estimation of cost and demand functions are obtained allowing for various collusive behaviors. The collusive hypothesis is not rejected, and the best form of collusive behavior is selected via nonnested testing procedures. Using the best model, Lerner indices are computed for both duopolists to provide summary measures of market power. Finally, our approach is contrasted with the conjectural variation approach and is shown to give superior results.

Notes: The microstructures in the Erro-Tobbio peridotite indicate several stages of recrystallization of olivine + titanian clinohumite-bearing assemblages. The development of these assemblages is closely associated with serpentinite mylonites, in which they occur in shear bands and foliations and are inferred to have grown synkinematically, in veins, and as post-kinematic radial aggregates. In the peridotite wall-rock adjacent to these mylonites, the same assemblages have recrystallized statically at the expense of original olivine and pyroxenes, mesh-textured chrysolite and antigorite veins. In addition, the olivine-bearing assemblage occurs in widespread vein systems. The brittle deformation of the peridotite resulting in the development of these vein systems is closely related to ductile deformation of metagabbroic dykes in the peridotite. Although early metasomatism resulted in extensive rodingitization of the gabbros, some dykes show an eclogitic assemblage of Na-clinopyroxene + garnet + chloritoid + chlorite ± talc. These observations, the microstructures and the mineral chemistry all suggest that the assemblages in the ultramafic rocks and metagabbros developed during a prograde evolution towards high pressures (〉13–16 kbar, 450–550° C), and during subsequent decompression. This metamorphic evolution is considered to be related to Late Cretaceous intraoceanic subduction in the Alps-Apennine system and closure of the Piedmont-Ligurian basin.

Notes: A complete prograde P–T path, defined by 10 calculated P–T fields in succession, is recognized from metapelites by using geothermobarometry on garnet-bearing assemblages with microstructural control. Overstacking of several tectonic units during an early Variscan continental collision explains the complex prograde P–T history. Isostatic uplift and deformation controlled the retrograde P–T path.Deformation with changing character acted continuously during all stages of the evolution of the Austroalpine basement complex. After the intrusion of Caledonian granitoids, metapelites and magmatic rocks suffered a shearing deformation D1–D2, which produced sheath folds as well as the main foliation S2. Spessartine-rich first-generation garnets, situated in microlithons enclosed by S2, record the onset of shearing under increasing high-pressure–low-temperature conditions (7 kbar/380°C). Geothermobarometry on second-generation garnets which have been rotated during growth indicates isothermal decompression from 9 kbar to 5 kbar/500°C and subsequent recompression/heating during continuing shearing. This is explained by overthrusting of a tectonic unit (unit 2) from NE to SW upon the micaschist unit (unit 1), followed by isostatic uplift and further overstocking of a third unit (unit 3). The resulting Pmax of 12 kbar at 650°C and further increasing temperatures up to 680°C accompanied by decompression have been calculated using a third generation of garnets. These high-pressure–high-temperature conditions may explain the occurrence of eclogitic metabasites in adjacent regions.Staurolite and kyanite first appeared under decreasing pressures at the last stage of prograde P–T evolution. Shortening deformation D3 and simultaneous growth of typical amphibolite facies minerals (staurolite 2, kyanite 2, sillimanite, andalusite) occurred during the retrograde path. A final step of Variscan evolution was marked by an oppositely directed shearing D4 (at T 〉 300°C and P 〉 3 kbar), possibly indicating backthrusting or extension.Apart from acid intrusions, no signs of a previous Caledonian thermotectonic history were found in the area to the south of the Defereggen–Antholz–Vals Line.

Notes: Olivine-plagioclase coronas in metagabbros from the Adirondack Mountains, New York (USA) are spatially well-organized reaction textures consisting most commonly of sequential layers of orthopyroxene, clinopyroxene, plagioclase, and garnet; the textures are characteristic of diffusion-controlled reaction kinetics. Although similar coronas have been interpreted by previous workers in terms of an isochemical steady-state diffusion model, petrographical relations and material-balance calculations establish that coronas in the Adirondack metagabbros cannot be treated as isochemical and do not form in a single-stage steady-state process; instead they evolve through time in a complex open-system reaction.In this study, the isochemical diffusion model is modified to account for elemental fluxes across the outer boundaries of the coronal reaction band, thereby approximating the open-system behaviour of the coronas. The sequence and relative proportions of product minerals calculated by the open-system steady-state model correspond closely to those observed in coronas of the Adirondacks, over a wide range of values for the relative diffusivities of chemical components involved in the reaction, regardless of the particular method used to determine material balance in the reaction texture.Despite this correspondence, petrographical evidence for successive replacement of coronal product layers reveals that the Adirondack coronas evolved through one or more transient states, rather than forming in a single-stage steady-state process. There is no evidence that the successive replacement of coronal product layers resulted from changes in pressure or temperature, but there is petrographical evidence that these changes resulted from modification of the composition of reactant plagioclase as the corona-forming reaction proceeded. This is confirmed by the fact that the evolution of the coronas over time can be replicated with the open-system diffusion model by simulating the effect of the gradual exhaustion of plagioclase as a source of the Ca and Si components required for reaction. These simulations suggest that successive stages in the evolution of the coronas are characterized by these product sequences: (i) orthopyroxene-clinopyroxene-plagioclase-garnet; (ii) orthopyroxene-clinopyroxene-garnet; and (iii) orthopyroxene-garnet. All of these stages, and the transitions between them, are observed petrographically. Coronas in Adirondack metagabbros appear, therefore, to have originated in a complex, open-system, diffusion-controlled reaction in which the product assemblages changed as the reaction progressed.

Notes: Pseudotachylite veins have been found in the mylonite zone of the Hidaka metamorphic belt, Hokkaido, northern Japan. They are associated with faults with WNW-ESE to ENE-WSW or NE-SW trends which make a conjugate set, cutting foliations of the host mylonitic rocks with high obliquity. The mylonitic rocks comprise greenschist facies to prehnite-pumpellyite facies mineral assemblages. The mode of occurrence of the pseudotachylite veins indicates that they were generated on surfaces of the faults and were intruded as injection veins along microfractures in the host rocks during brittle deformation in near-surface environments. An analysis of the deformational and metamorphic history of the Hidaka Main Zone suggests that the ambient rock temperature was 200–300° C immediately before the formation of the Hidaka pseudotachylite.Three textural types of veins are distinguished: cryptocrystalline, microcrystalline and glassy. The cryptocrystalline or glassy type often occupies the marginal zones of the microcrystalline-type veins. The microcrystalline type is largely made up of quench microlites of orthopyroxene, clinopyroxene, biotite, plagioclase and opaque minerals with small amounts of amphibole microlites. The interstices of these microlites are occupied by glassy and/or cryptocrystalline materials. The presence of microlites and glasses in the pseudotachylite veins suggests that the pseudotachylites are the products of rapid cooling of silicate melts at depths of less than 5 km.The bulk chemical composition of the pseudotachylite veins is characterized by low SiO2 and a high water content and is very close to that of the host mylonitic rocks. This indicates that the pseudotachylite was formed by virtual total melting of the host rocks with sufficient hydrous mineral phases. Local chemical variation in the glassy parts of the pseudotachylite veins may be due to either crystallization of quench microlites or the disequilibrium nature of melting of mineral fragments and incomplete mixing of the melts. Pyroxene microlites show a crystallization trend from hypersthene through pigeonite to subcalcic augite with unusually high Al contents. The presence of pigeonite and high-Al pyroxene microlites, of hornblende and biotite microlites and rare plagioclase microlites may indicate the high temperature and high water content of the melt which formed the pseudotachylite veins. The melt temperatures were estimated to be up to 1100° C using a two-pyroxene geothermometer. Using published data relating water solubilities in high-temperature andesitic magmas to pressure, a depth estimate of about 4 km is inferred for the Hidaka pseudotachylites.Evidence derived from pseudotachylites in the Hidaka metamorphic belt supports the conclusion that pseudotachylite is formed by frictional melting along fault surfaces at shallow depths from rocks containing hydrous minerals.

Notes: The higher grade metamorphic zonation of the Sambagawa (= Sanbagawa) belt is established for the first time for the whole area of central Shikoku. As discontinuous reactions to define the isograd are absent, the metamorphic grade is primarily determined by the Mg-Fe partitioning between garnet and chlorite along representative traverses. However, for regional mapping, mineralogical features of the pelitic schists, such as using mineral assemblages of more than divariant equilibrium, the modal garnet to chlorite ratio, and the optical properties of chlorite, are employed as auxiliary criteria.The presence of the highest grade mineral zone in the middle of the structural level is confirmed, but its spatial distribution is far more complex than hitherto accepted. Thermal axes are now confirmed at three different structural levels. A model is presented in which the stacking of thrust sheets of different grade took place while metamorphic reactions were in progress. Thermal readjustment brought a continuous metamorphic temperature gradient across and within the thrust sheets. Tectonic blocks of metagabbro and ultramafic rock were emplaced synchronously with thinning and subsequently also re-equilibrated. Local anomalies of metamorphic grade, represented by mixing of schists of different metamorphic grade, exist, but they are due to a later stage event.

Notes: Low-pressure metamorphic facies (i.e. high T/P ratios) are widespread in a wide range of tectonic settings. Explanations offered for the occurrence of these facies include extensional and/or magmatic models. However, these fail to explain that the low-P facies metamorphism is commonly coeval with a phase of pervasive crustal thickening, with T/P ratios increasing during, or slightly lagging behind, the thickening. We propose an alternative explanation based on the approximate synchroneity of crustal thickening and erosion (thinning) of the mantle lithosphere.

Notes: In the Proterozoic Mary Kathleen Fold Belt, northern Australia, infiltration of large volumes of externally derived fluid occurred synchronously with regional amphibolite-facies metamorphism and deformation. This paper develops a model of structurally controlled fluid migration by comparing the distribution of fossil fluid pathways with the inferred stress and strain patterns during the deformation. Intense fluid flow was localized within strong, relatively brittle meta-intrusive bodies, and in discrete, veined, brecciated and altered zones around their margins. In metasediments folded in a ductile manner outside these areas, fluid infiltration was negligible. The direct correlation between structural styles and the magnitude of veining and metasomatism suggests control of permeability enhancement, and hence fluid flow, by deformation. Finite difference modelling of a strong body in a weaker matrix has been used to evaluate the variation of stresses during the deformation, from which it is clear that stress and strain heterogeneities have systematically influenced the development and maintenance of metamorphic fluid pathways. Particular regions in which mean stress may be significantly lower than the average lithostatic pressures include the ‘strain shadow’zones adjacent to the strong bodies, other dilatant zones around the bodies, and the bodies themselves. This geometry is favourable not only for localized brittle deformation under amphilobite facies conditions, but also for focused fluid flow in the low mean stress regions, as evidenced by the abundance of veins. Fluid access through these metamorphic aquifers occurred during tensile failure episodes, with particularly large dilations and decimetre-scale veining in areas of strain incompatibility. It appears likely that fluid circulated many times through the Fold Belt, with flow concentrated in the metamorphic aquifers. A model is developed that explains both the structurally focused fluid flow and the postulated multi-pass recirculation by dilatancy pumping, the ‘pump engines’comprising the low mean stress zones.

Notes: An Early Palaeozoic (Ordovician ?) metamudstone sequence near Wojcieszow, Kaczawa Mts, Western Sudetes, Poland, contains numerous metabasite sills, up to 50 m thick. These subvolcanic rocks are of within-plate alkali basalt type. Primary igneous phases in the metabasites, clinopyroxene (salite) and kaersutite, are veined and partly replaced by complex metamorphic mineral assemblages. Particularly, the kaersutite is corroded and rimmed by zoned sodic, sodic–calcic and calcic amphiboles. The matrix is composed of actinolite, pycnochlorite, albite (An ≤ 0.5%), epidote (Ps 27–33), titanite, calcite, opaques and, occasionally, biotite, phengite and stilpnomelane.The sodic amphiboles are glaucophane to crossite in composition with NaB from 1.9 to 1.6. They are rimmed successively by sodic–calcic and calcic amphiboles with compositions ranging from magnesioferri-winchite to actinolite. No compositions between NaB= 0.92 and NaB= 1.56 have been ascertained.The textures may be interpreted as representing a greenschist facies overprint on an earlier blueschist (or blueschist–greenschist transitional) assemblage. The presence of glaucophane and no traces of a jadeitic pyroxene + quartz association indicate pressures between 6 and 12 kbar during the high-pressure episode. Temperature is difficult to assess in this metamorphic event. The replacement of glaucophane by actinolite + chlorite + albite, with associated epidote, allows restriction of the upper pressure limit of the greenschist recrystallization to 〈8 kbar, between 350 and 450°C. The mineral assemblage representing the greenschist episode suggests the P–T conditions of the high-pressure part of the chlorite or lower biotite zone. The latest metamorphic recrystallization, under the greenschist facies, may have taken place in the Viséan.

Notes: Using the experimental data on Fe–Mg exchange between orthopyroxene and biotite of Fonarev & Konilov (1986), an orthopyroxene–biotite geothermometer is developed. The thermometer is corrected for mixing of Ti and Al in octahedral sites in biotite and also for non-ideal mixing of Fe and Mg in orthopyroxene. The thermometer is applied to several amphibolite–granulite transition facies and granulite facies rocks and also to mantle xenoliths. It yields consistent results in rocks of widely varying bulk composition, and highly magnesian mantle xenoliths. This thermometer removes the difficulty of estimating temperature in garnet-free rocks in high-grade terrains and also provides independent estimates of temperature in garnet-bearing assemblages.

Notes: The Omeo Metamorphic Complex forms the southern end of the Wagga Metamorphic Belt, which is the main locus of Palaeozoic low-pressure metamorphism in the Lachlan Fold Belt, south-eastern Australia. It comprises metamorphosed Ordovician quartz-rich turbidites originally derived from Precambrian cratonic rocks. Prograde regional metamorphism occurred in the early Silurian, very soon after sedimentation had ceased. The sequence of metamorphic zones, with increasing grade, is: chlorite, biotite, cordierite, andalusite–K-feldspar and sillimanite–K-feldspar. Migmatites occur in the sillimanite–K-feldspar zone, but large bodies of S-type granite were derived from rocks underlying the exposed Ordovician sequence. P and T estimates for the highest grade rocks are T= 700°C and P= 3.5 kbar, indicating a very high P–T gradient of 65°C/km.The high heat flow during prograde metamorphism probably resulted from a combination of a thermal anomaly persisting from a pre-metamorphic back-arc basin environment, and intrusion of hot, mantle-derived magmas into the lower and middle crust.Regional retrograde metamorphism coincided with a general reheating of the crust in the Siluro-Devonian, accompanied by intrusion of many I-type plutons and resetting of the K–Ar dates of some earlier plutons. The Omeo Metamorphic Complex was exposed to erosion at this time.

Notes: The Narryer Gneiss Complex of the Yilgarn Block is a key segment of the Western Australian Precambrian Shield. It is a regional granulite facies terrain comprised of predominantly quartzo-feldspathic gneisses derived from granitic intrusions c. 3.6–3.4 Ga old. Granulite facies metamorphism occurred c. 3.3 Ga ago, and conditions of 750–850°C and 7–10 kbar are estimated for the Mukalo Creek Area (MCA) near Errabiddy in the north. The P–T path of the MCA has been derived from metamorphic assemblages in younger rocks that intruded the gneisses during at least three subsequent events, and this path is supported by reaction coronas in the older gneisses. There is no evidence for uplift immediately following peak metamorphism of the MCA, and a period of isobaric cooling is inferred from the pressures recorded in younger rocks. Pressures and temperatures estimated from metadolerites, which intruded the older gneisses during ‘granite–greenstone’tectonism at about 2.6 Ga and during early Proterozoic thrusting show that the Errabiddy area remained in the lower crust, although it was probably reheated during the younger events. Isothermal uplift to upper crustal levels occurred at c. 1.6 Ga ago, and was followed by further deformation and patchy retrogression of high-grade assemblages. The effects of younger deformation, cooling and reheating can be discerned in the older gneisses, but as there has been no pervasive deformation or rehydration, the minerals and microstructures formed during early Archaean granulite facies metamorphism for the most part are retained.The MCA remained in the lower crust for about 1700 Ma following peak metamorphism and some event unrelated to the original metamorphism was required to exhume it. Uplift occurred during development of the Capricorn Orogen, when some 30–35 km were added to the crust beneath the Errabiddy area. The recognition of early Proterozoic thrusting, plus crustal thickening, suggests that the Capricorn Orogen is a belt of regional compression which resulted from convergence of the Yilgarn and Pilbara Cratons.

Notes: We present, as a progress report, a revised and much enlarged version of the thermodynamic dataset given earlier (Holland & Powell, 1985). This new set includes data for 123 mineral and fluid end-members made consistent with over 200 P–T–XCO2–fO2 phase equilibrium experiments. Several improvements and advances have been made, in addition to the increased coverage of mineral phases: the data are now presented in three groups ranked according to reliability; a large number of iron-bearing phases has been included through experimental and, in some cases, natural Fe:Mg partitioning data; H2O and CO2 contents of cordierites are accounted for with the solution model of Kurepin (1985); simple Landau theory is used to model lambda anomalies in heat capacity and the Al/Si order–disorder behaviour in some silicates, and Tschermak-substituted end-members have been derived for iron and magnesium end-members of chlorite, talc, muscovite, biotite, pyroxene and amphibole.For the subset of data which overlap those of Berman (1988), it is encouraging to find both (1) very substantial agreement between the two sets of thermodynamic data and (2) that the two sets reproduce the phase equilibrium experimental brackets to a very similar degree of accuracy. The main differences in the two datasets involve size (123 as compared to 67 end-members), the methods used in data reduction (least squares as compared to linear programming), and the provision for estimation of uncertainties with this dataset. For calculations on mineral assemblages in rocks, we aim to maximize the information available from the dataset, by combining the equilibria from all the reactions which can be written between the end-members in the minerals. For phase diagram calculations, we calculate the compositions of complex solid solutions (together with P and T) involved in invariant, univariant and divariant assemblages. Moreover we strongly believe in attempting to assess the probable uncertainties in calculated equilibria and hence provide a framework for performing simple error propagation in all calculations in thermocalc, the computer program we offer for an effective use of the dataset and the calculation methods we advocate.

Notes: In a granulite-facies spinel-bearing quartzite, corundum, orthopyroxene and sapphirine (and rarely cordierite and sillimanite) form partial rims separating spinel from quartz. Textures indicate the reactions:spinel + quartz = orthopyroxene + corundum, andspinel + quartz = orthopyroxene + sapphirine.Thus, corundum and sapphirine are produced by reactions involving quartz. The low Al-content of the orthopyroxene (0.5–2.8 wt %) and low values for Mg–Fe distribution coefficient for spinel–sapphirine and spinel–orthopyroxene reflect low-temperature conditions during formation of the reaction products. Absence of zoning in spinel and a constant Mg–Fe distribution coefficient for spinel–sapphirine and spinel–orthopyroxene, over a compositional range, indicate Mg–Fe equilibration. It is suggested that stable reactions such as spinel + quartz = cordierite or spinel + quartz = garnet + sillimanite were over-stepped and that metastable reactions give rise to the anomalous juxtaposition of corundum + quartz.

Notes: Abstract In well NJ-15 of the Nesjavellir geothermal field, Iceland, the transition of discrete smectite into discrete chlorite has been studied from drill cuttings recovered at depths of less than 1714 m and over a continuous range of temperatures between 60 and 300° C. At temperatures below 180° C, the clay fractions contain mixtures of di- and trioctahedral smectites, whose layer charge increases with depth. Between 200 and 240° C, discrete smectites have transformed into smectite-rich, randomly interstratified chlorite and smecite (R0 C/S). Because the abundance of chlorite interlayers in this C/S is generally 〈20%, its presence can be detected only by electron microprobe techniques and not by X-ray diffraction. Between 245 and 265° C, both regularly (R1) and randomly interstratified C/S are the predominant layer silicates. Discrete chlorite first appears at approximately 270° C and coexists with minor amounts of R0 C/S at higher temperatures. R0 and R1 C/S form a nearly complete compositional series between trioctahedral saponite and discrete chlorite end-members. The interlayer cation and Si content of smectites and C/S decrease with increasing temperature. The Mg/(Mg + Fe) content of smectite, C/S, and chlorite is unrelated to temperature. The percentage of chlorite in C/S, as determined by electron microprobe analyses, increases continuously with increasing temperature, except for occurrences of smectite-rich C/S in fresh basaltic dykes which have not thermally equilibrated with the higher grade country rocks.

Notes: Abstract Fairly strong (r= 0.75–0.85) positive linear correlations were found between crystallinity indices (peak widths) measured on the first two basal reflections of chlorite and those of illite–muscovite in 〈2-μm fractions of a representative shale–slate–phyllite series from Palaeozoic and Mesozoic formations of northeast Hungary. The metamorphic grade ranges from late or deep diagenesis through anchizone to epizone conditions. Chlorite crystallinity values measured on air-dried and ethylene-glycol-solvated samples suggest that the effects of expandable interlayers are negligable, especially in the higher grade (∼temperature) part of the series. However, the greater scattering of crystallinity values for the chlorite 001 reflection compared to those of the 002 reflection may be related to the effects of minor amounts of interlayered and/or discrete smectite and/or vermiculite. With increasing metamorphic grade and advancing equilibrium recrystallization, the chlorite compositions in different samples become more homogenous. No correlation exists between crystallinity and changes in chlorite composition as estimated from the intensity ratios of basal reflections. Hence an increase of domain size and a decrease of lattice distortion with increasing grade (∼temperature) may be decisive factors affecting chlorite crystallinity.Chlorite crystallinity can be applied as a reliable regional, statistical technique complementary with, or instead of, the illite crystallinity method. The illite and chlorite crystallinity scales used here are related to Kübler's epi-, anchi- and diagenetic zones and correlated with coal rank, conodont colour alteration and mineral facies data. As the effects of the detrital white mica can be observed even in the 〈2-μm fractions of anchizonal metapelites, the anchizone boundaries determined solely on the base of ‘fixed’illite crystallinity values may vary with amounts of detrital and newly formed muscovite–illite. Hence a complex approach utilizing more than one method for determination of grade is preferred for petrogenetic purposes, even if relationships between crystallinity scales, coal rank and mineral facies also vary strongly in different tectonic settings and lithologies.

Notes: Abstract Illite crystallinity (IC) and other indicators of the grade of very-low-grade metamorphism associated with the appearance of various stages of slaty cleavage in phyllosilicate-rich rocks have been compiled from a wide variety of terranes. IC values have been converted to a Kübler-equivalent standard scale, but the diverse characterizations of the cleavage fabrics in published descriptions do not always allow an unequivocal identification of equivalent stages of cleavage development.Nevertheless, there exists a distinct relationship between grade and the appearance of various stages of cleavage development.(1) Indications of incipient slaty cleavage, such as S0–S1 pencil structure, appearance of primary (S1) crenulation cleavage and of closely-spaced cleavage without parallel fabric in the microlithons, is associated with a wide range of mostly medium- and high-grade diagenetic IC values.(2) The appearance of smooth cleavage with a strong parallel fabric in the microlithons and/or quartz–mica ‘beards’and the chlorite–mica stacks shortened at a high angle to (001), and of irregular cleavage in sandy beds is associated with a much narrower range of predominantly low- and medium-grade anchimetamorphic grades (rarely high-grade diagenetic). The first appearance of these stages of cleavage development with higher grades can often be related to post-kinematic magmatic heating, polymetamorphism (pre-cleavage metamorphism), or ‘static’recrystallization without cleavage formation, for example in low-strain zones.There exists a relationship between finite strain, fabric and metamorphic grade in mudstones and slates; in coarser clastic rocks the same finite strain–fabric relationship occurs at appreciably higher grades. A relationship between finite strain in carbonate rocks and IC in the nearby rocks has been reported from the Helvetic zone of the Swiss Alps.The earlier stages of cleavage formation are associated with little improvement in IC; the narrow range of IC associated with smooth cleavage is concluded to represent recrystallization and grain growth concurrent with cleavage formation.

Notes: Distinctive lithological associations and geological relationships, and initial geochronological results indicate the presence of an areally extensive region of reworked Archaean basement containing polymetamorphic granulites in the Rauer Group, East Antarctica.Structurally early metapelites from within this reworked region preserve complex and varied metamorphic histories which largely pre-date and bear no relation to a Late Proterozoic metamorphism generally recognized in this part of East Antarctica. In particular, magnesian metapelite rafts from Long Point record extreme peak P–T conditions of 10–12 kbar and 100–1050°C, and an initial decompression to 8 kbar at temperatures of greater than 900°C. Initial garnet–orthopyroxene–sillimanite assemblages contain the most magnesian (and pyrope-rich) garnets (XMg= 0.71) yet found in granulite facies rocks. A high-temperature decompressional P–T history is consistent with reaction textures in which the phase assemblages produced through garnet breakdown vary systematically with the initial garnet XMg composition, reflecting the intersection of different divariant reactions in rocks of varied composition as pressures decreased. This history is thought to relate to Archaean events, whereas a lower-temperature (c. 750–800°C) decompression to 5 kbar reflects Late Proterozoic reworking of these relict assemblages.The major Late Proterozoic (c. 1000 Ma) granulite facies metamorphism is recorded in a suite of younger Fe-rich metapelites and associated paragneisses in which syn- to post-deformational decompression, through 2–4 kbar from maximum recorded P–T conditions of 7–9 kbar and 800–850°C, is constrained by geothermobarometry and reaction textures. This P–T evolution is thought to reflect rapid tectonic collapse of crust previously thickened through collision.

Notes: In the southeastern Reynolds Range, central Australia, a low-P granulite facies metamorphism affected two sedimentary sequences: the Lander Rock Beds and the Reynolds Range Group. In the context of the whole of the Reynolds Range and the adjacent Anmatjira Range, this metamorphism is M3 in a sequence M1–4 that occurred over a period of 250 Ma. In particular, M1 affected the Lander Rock Beds prior to the deposition of the Reynolds Group. M3 has an areally restricted, high-grade area in the southeastern Reynolds Range, affecting both the Reynolds Range Group and the underlying Lander Rock Beds. The effects of M3 are characterized by spinel + quartz-bearing peak metamorphic assemblages in metapelites, which imply peak conditions of ≥750°C and 4.5 ± 1 kbar, and involved isobaric cooling or compression with cooling. It is concluded that one of a series of thermal perturbations caused by thinning of mantle lithosphere contemporaneous with crustal thickening was responsible for M3. In the southeastern Reynolds Range, evidence of both the unconformity between the two rock groups and previous metamorphism/deformation has been completely erased by recrystallization during M3–D3.

Notes: On the basis of fluid inclusion evidence, pervasive influx of deep-seated CO2-rich fluids has been invoked to account for mid- to upper amphibolite facies (M2B) metamorphism on the island of Naxos (Cyclades, Greece). In this paper, mineral devolatilization and melt equilibria are used to constrain the composition of both syn- and post-peak-M2B fluids in the deepest exposed levels of the metamorphic complex. The results indicate that peak-M2B fluids were spatially and compositionally heterogeneous throughout the high-grade core of the complex, whereas post-peak-M2B fluids were generally water-rich. The observed heterogeneities in syn-M2B fluid composition are inconsistent with pervasive CO2-flushing models invoked by previous workers on the basis of fluid inclusion evidence. It is likely that few CO2-rich fluid inclusions on Naxos preserve fluids trapped under peak metamorphic conditions. It is suggested that many of these inclusions have behaved as chemically open systems during the intense deformation that accompanied the uplift of the metamorphic complex. A similar process may explain the occurrence of some CO2-rich fluid inclusions in granulite facies rocks.

Notes: A detailed high-pressure experimental study of two mafic xenoliths, in which coexisting garnet and clinopyroxene (± plagioclase, spinel and olivine) were crystallized over a P–T range of 10–30 kbar and 950–1200°C, has revealed significant differences in temperatures from those estimated for coexisting garnets and clinopyroxenes using the Ellis & Green Fe–Mg exchange thermometer. The results show perfect matching at 30 kbar, 1150–1200°C, but increasing deviation at lower pressure and lower temperature, with the Ellis & Green calibration reaching a ΔT (overestimate) of c. 145°C at 10–12 kbar and 950°C. The grossular content of the garnet increases from c. 21 mol.% at 10 kbar to 26–31 mol.% at 30 kbar. These results confirm other recent experimental studies that show that the pressure correction, and possibly to a lesser extent the correction for grossular content, applied by Ellis & Green, are not appropriate for lower pressure conditions, and give estimated temperatures that are significantly high when applied to granulitic terranes formed at c. 10 kbar. The new reconnaissance results allow a graphical interpolation of a garnet–clinopyroxene geothermometer based on the Fe–Mg exchange reaction which should be applicable to assemblages formed under lower crustal conditions.

Notes: The Main Zone of the Hidaka Metamorphic Belt is an uplifted crustal section of island-arc type. The crust was formed during early Tertiary time, as a result of collision between two arc–trench systems of Cretaceous age. The crustal metamorphic sequence is divided into four metamorphic zones (I–IV), in which zone IV is in the granulite facies.A detailed study of the evolution of the Hidaka Belt, based on a revised P–T–t analysis of the metamorphic rocks, notably a newly found staurolite-bearing granulite, confirms a prograde isobaric heating path, after a supposed event of tectonic thickening of accretionary sedimentary and oceanic crustal rocks. During the peak metamorphic event (c. 53 Ma), the regional geothermal gradient attained 33–40° C km−1, and the highest P–T condition obtained from the lowest part of the granulite unit is 830° C, 7 kbar. In this part, XH2O of Gt–Opx–Cd gneiss is about 0.15 and that of Gt–Cd–Bt gneiss is 0.4. The P–T–XH2O condition of the granulite unit is well within a field where fluid-present partial melting of pelitic and greywacke metamorphic rocks takes place. This is in harmony with the restitic nature of the Gt–Opx–Cd gneiss in the lowest part of the granulite unit.The possibility that partial melting took place in the Main Zone is significant for the genesis of the peraluminous (S-type) granitic rocks within it. The S-type granitic rocks in this zone are Opx–Gt–Bt tonalite in the granulite zone, Gt–Cd–Bt tonalite in the amphibolite zone, and Cd–Bt–Mus tonalite in the Bt–Mus gneiss zone. The mineralogical and chemical nature of these strongly peraluminous tonalitic rocks permit them to be regarded as having been derived from S-type granitic magma generated by crustal anatexis of pelitic metamorphic rocks in deeper crust.

Notes: The paragenetic relationships between sillimanite, andalusite, kyanite, chlorite, cordierite, biotite, garnet and staurolite in the Early Proterozoic Puolankajärvi Formation (PjF), together with mineral compositions, are used to construct a partial petrogenetic grid for metapelites with significant Mn content (MnO = 0.1–0.5%) by adding a six-phase invariant point over the garnet-absent invariant point for Mn-free AMF-phases.The grid and textural relations of the PjF are used to construct part of the P–T–deformation path for the PjF. Relatively short deformation pulses and associated flow of oxidizing fluid along shear zones were responsible for the paragenetic and compositional changes during cooling and decompression at 600–500°C and 6.0–2.5 kbar. Oxidation led to decreased Fe2+ and further stressed the importance of Mn (increased Mn/divalent cations).A tectonothermal evolution of the Kainuu Schist Belt is presented which includes crustal thinning and steepening of a previously established thermal gradient. This was followed by thrusting and folding of the isotherms into a thermal antiform on the western side of the belt.

Notes: The alkalic Scituate Granite was emplaced into crystalline sequences within the New England Esmond–Dedham terrane in the Late Devonian (c. 370 Ma). Variably recrystallized amphibole (iron-rich, hastingsite–hastingsitic hornblende) from four variably deformed samples of the pluton record south-westerly younging 40Ar/39Ar plateau ages ranging between 276 and 263 Ma. These are interpreted to date diachronous cooling through temperatures appropriate for intracrystalline retention of argon following late Palaeozoic orogenic activity. Iron-rich biotite concentrates from the samples record only slightly younger ages, and therefore suggest relatively rapid post-metamorphic cooling. The 40Ar/39Ar ages indicate that the late Palaeozoic tectonothermal overprint was much more regionally pervasive than was previously considered. The apparent timing of this activity is similar to previous estimates for the chronology of high-grade metamorphism throughout the adjacent Hope Valley terrane and for phases of ductile movement on the intervening Lake Char–Honey Hill fault system.

Notes: Aluminous reaction textures in orthoamphibole-bearing rocks from the Froland area, Bamble, south Norway, record the prograde pressure–temperature path of the high-grade Kongsbergian Orogeny (c. 1600–1500 Ma) and the low–mid amphibolite facies overprint during the Sveconorwegian Orogeny (c. 1100–1000 Ma). The rocks contain anthophyllite/gedrite, garnet, cordierite, biotite, quartz, andalusite, kyanite, Cr-rich staurolite, tourmaline, ilmenite, rutile and corundum in a variety of parageneses. The P–T path is deduced from petrographic observations, mineral chemistry and zoning, geothermometry and (N)FMASH equilibria. The results indicate the sequence of metamorphic stages outlined below. (a) An M1 phase characterized by the presence of strongly deformed andalusite, gedrite and tourmaline.(b) An M2 phase with the development of kyanite after andalusite and the growth of staurolite associated with strong Na–Al–Mg zoning in orthoamphibole, indicating an increase in pressure (4 8 kbar) and temperature (500° 650°C).(c) Pressure decrease at high P (6–7 kbar) and high T (600–700 °C) during M3a with the production of cordierite ° Corundum between kyanite, staurolite and orthoamphibole and cordierite growth between corundum and orthoamphibole.(d) Temperature increase to 740 ± 60 °C and 7 kbar; static growth of garnet (M3b) at the metamorphic climax (peak T). The heat supply necessary to explain the temperature increase between the M3a and M3b phases is correlated with synkinematic enderbitic–charnockitic and basic intrusions in the Arendal granulite facies terrain.(e) M3b metamorphic conditions were followed by an initial isobaric cooling path (early M4) and late-stage pressure decrease (late M4). Early M4 conditions of 6–7 kbar and 550–600 °C, assuming PH2O 〈 Ptotal are indicated by a retrograde talc–kyanite–quartz assemblage in late quartz–cordierite veins. Late M4 conditions of 3–4 kbar and 420–530 °C are inferred from a kyanite–andalusite–chlorite–quartz assemblage in vein-cordierite. The M1–M3 stages are interpreted as being the result of the same metamorphic P–T path, which was caused by both tectonic and magmatic thickening. A prolonged crustal residence time is proposed for the Bamble sector before uplift during the later stages of M4 occurred.

Notes: Instrumental settings for determination of illite/muscovite ‘crystallinity’(half-height width of the 10-Å X-ray diffraction peak) and the limits of the anchimetamorphic zone adopted by various authors fall into several groups.The variation in the limiting peak widths between the authors that have adopted Kubler's Neuchâtel boundary values of 0.42° and 0.25°Δ2θ can be interpreted in terms of variation in the instrumental settings. The choice of time constants higher than those given by the formula causes peak broadening; this effect is particularly marked at high scan rates. The peak broadening is by constant increments that are virtually independent of the absolute peak width.The differences between the Kubler (Neuchâtel)-derived limiting values and some other scales are appreciably greater than can be accounted for by these differences in instrumental settings: many of these scales are not equivalent. In particular, the limits adopted by Dunoyer de Segonzac (1969) and subsequent workers at Strasbourg are too broad; their anchizone represents a range of grades of metamorphism lower than that of Kubler, widely overlapping the latter's ‘diagenetic’zone. Those adopted by some other, mainly French, authors are too narrow.The limits of the anchizone should be calibrated by inter-laboratory standards, and the instrumental settings should be specified in full.

Notes: A combination of fluid inclusion, stable isotope and geochemical techniques has been used to study the nature of fluids present and their behaviour during Caledonian low-grade metamorphism of the Harlech Dome, north Wales. Fluid inclusion studies show that in most of the metasedimentary sequence the peak metamorphic fluid was an aqueous Na–K–Cl brine but in the graphitic Clogau Formation and in parts of the overlying Maentwrog Formation immiscible H2O-rich and CH4-rich fluids coexisted.Late-stage inclusions are of calcium-rich brine and a dilute aqueous fluid. The chemical composition of chlorite in metamorphic veins and rocks varies between different formations and quartz-oxygen isotopic compositions show considerable variation between different units. Both of these features are taken to indicate that there was little or no pervasive movement of fluid between different units at the peak of metamorphism. After the metamorphic peak there was focused flow of fluid upward through the sequence along fractures, in response to end-Caledonian uplift and unloading. Where the migrating fluid crossed the graphitic shales, interaction between the fluid and the shales gave rise to the formation of the auriferous veins of the Dolgellau Gold Belt. Subsequent to this mineralizing event there was widespread development of 18O-enriched calcites and micas.In the case of vein minerals it is possible that these crystallized directly from late-stage fluids at lower temperature than the quartz in the same veins. Alternatively, the original vein minerals may have re-equilibrated with later 18O-enriched or cooler fluid. In the case of muscovites in the rock matrix it is proposed that the isotopically heavy compositions are the result of re-equilibration of initially light grains with an introduced fluid, requiring considerable influx of fluid. This event may relate to either of two late-stage fluids observed as inclusions.

Notes: Retrograde exchange of oxygen isotopes between minerals in igneous and metamorphic rocks by means of diffusion is explored using a finite difference computer model, which predicts both the zonation profile of δ18O within grains, and the bulk δ18O value of each mineral in the rock. Apparent oxygen isotope equilibrium temperatures that would be observed in these rocks are calculated from the δ18O values of each mineral pair within the rock. In systems which cool linearly from a sufficiently high temperature or at a low enough cooling rate, such that the final oxygen isotope values are not dependent upon the initial oxygen isotope values (‘slow cooling’), the apparent oxygen isotope temperature derived for a rock composed of a single mineral pair can be shown to be simply related to the Dodson closure temperatures (Tc) for the two phases and the mode of the rock. Adding a third phase into a system which undergoes ‘slow’ cooling will cause the apparent temperature derived for the two minerals already present to differ from the simple relationship for a two-phase system. In some systems oxygen isotope reversals can be developed. If cooling is not ‘slow’, then the mineral δ18O values resulting from cooling will be partly dependent upon the initial temperature of the system concerned. The model successfully simulates the mineral δ18O values that are often observed in granitic rocks. Application of the model will help in assessing the validity of oxygen isotope thermometry in different geological settings, and allows quantitative prediction of the oxygen isotope fractionations that are developed in cooling closed systems.

Notes: The highest grade pelitic and semipelitic rocks of the Ballachulish aureole are dominantly potash feldspar + cordierite + biotite hornfelses with widely variable amounts of quartz, plagioclase, andalusite, sillimanite and corundum (together with accessory phases). On a microscopic scale these hornfelses show textural evidence of the presence of melt, whilst on a mesoscopic scale they contain a variety of leucosomes. Oxygen isotope studies have been carried out on both whole rocks and mineral separates in order to: (1) assess the sources of molten and volatile constituents and (2) determine the extents of isotopic homogenization and equilibration. Data from localities with both restricted and extensive evidence of leucosomes and melt development are compared, as well as one locality with petrographic evidence of melt incursion from the igneous complex.The whole-rock δ18O values of the leucosomes (10.5–14.9%.) are in general similar to the immediately adjacent mesosomes (9.9–14.5%.) which are typically cordierite- and feldspar-rich hornfelses. Isotopic evidence is thus consistent with an in-situ partial melt origin for the leucosomes, without the substantial addition of externally derived components. In the area of extensive melt development, the ‘chaotic zone’, it is possible there was addition of an H2O-rich fluid phase (6-13 wt%) from the igneous complex which resulted in a slight lowering of δ18O values by 0.5–1.0%.Quartz mineral separates were used to assess the degree of local isotopic homogenization. In the extensively molten area (chaotic zone) there is extensive homogenization between rock layers (quartz δ18O usually within 1.0%), whilst in less molten areas δ18O quartz has a range of c. 3.0%. The greater homogenization in the chaotic zone is attributed to the increased degree of melting and infiltration of H2O-rich fluid from the igneous complex.

Notes: The enderbites from Tromøy in the central, granulite facies part of the Proterozoic Bamble sector of southern Norway contain dominantly CO2 and N2 fluid inclusions. CO2 from fluid inclusions in quartz segregations in enderbites was extracted by mechanical (crushing) and thermal decrepitation and the δ13C measured. Measurement was also made on samples washed in 10% HCl, oxidized with CuO at high temperatures, and step-wise extracted with progressive heating. Results between the different techniques are systematic. The main results show δ13C of -4.5±1.5% for crushing and -7±2% for thermal decrepitation. δ13C is about constant for CO2 extracted at different temperatures and points to a homogeneous isotopic composition. Due to the presence of carbonate particles and/or induced contaminations for the extraction by thermal decrepitation, the results for the crushing experiments are assumed the most reliable for fluid-inclusion CO2. Very low values of δ13C have not been found in enderbite samples and δ13C combined with δ18O of the host quartzes (8-11%) indicates juvenile values. In addition, the fluid inclusions were examined by microthermometry and Raman analysis and host quartz by acoustic emission and cathodoluminescence. CO2 fluid inclusions have varying densities with a frequency maximum of 0.92 g cm-3 and generally do not concur with trapping densities at granulite conditions. Textures show that CO2 must have been trapped in fluid inclusions in one early event, but transformed to different extents during late isothermal uplift without important fractionation of isotope compositions. The present data support a model of intrusion and crystallization of a CO2-rich enderbitic magma at granuiite conditions.

Notes: High-grade exotic blocks in the Franciscan Complex at Jenner, California, show evidence for polydeformation/metamorphism, with eight distinct stages. Two parallel sets of mineral assemblages [(E) eclogite, and (BS) laminated blueschist] representing different bulk chemistry were identified. Stage 1, recorded by parallel aligned inclusions (S1) of crossite + omphacite + epidote + ilmenite + titanite + quartz (E), and glaucophane + actinolite + epidote + titanite (BS) in the central parts of zoned garnets, represents the epidote blueschist facies. The onset of a second stage (stage 2) is represented by a weak crenulation of S1 and growth of garnet. This stage develops a well-defined S2 foliation of orientated barroisite + epidote + titanite (E), or subcalcic actinolite + epidote + titanite (BS) at c. 90d̀ to S1, with syntectonic growth of garnet, defining the (albite-)epidote-amphibolite facies. A third stage, with aligned inclusions of glaucophane + (subcalcic) actinolite + phengite parallel to S2 in the outermost rims of large garnet grains, is assigned to the transitional (albite-)epidote-amphibolite/(garnet-bearing) epidote blueschist facies. The fourth stage represents the peak metamorphism, and was identified by unorientated matrix minerals in the least retrograded samples. In this stage the mineral assemblages garnet + omphacite + glaucophane + phengite (E) and garnet + winchite + phengite + epidote (BS) both represent the eclogite facies. Stage 5 is represented by the retrogression of eclogite facies assemblages to the epidote blueschist facies assemblages crossite/glaucophane + garnet + omphacite + epidote + phengite (E), and glaucophane + actinolite + epidote + phengite (BS), with the development of an S5 foliation subparallel to S2. Stage 6 represents a crenulation of S5, with the development of a well-defined S6 crenulation cleavage wrapping around relics of the eclogite facies assemblages. This crenulation cleavage is further weakly crenulated during a D7 event. Post-D7 (stage 8) is recorded by the growth of lawsonite + chlorite ± actinolite replacing garnet, and by veins of lawsonite + pumpellyite + aragonite and phengite + apatite. The different, yet coeval, mineral parageneses observed in rock types (E) and (BS) are probably due to differences in bulk chemistry.The metamorphic evolution from stage 1 to stage 8 seems to have been broadly continuous, following an anticlockwise P-Tpath: (1) epidote blueschist (garnet-free) to (2) (albite-)epidote-amphibolite to (3) transitional epidote blueschist (garnet-bearing)/(albite-)epidote-amphibolite to (4) eclogite to (5) epidote blueschist (garnet-bearing) to (6-7) epidote blueschist (garnet-free) facies to (8) lawsonite + pumpellyite + aragonite-bearing assemblages. This anticlockwise P-T path may have resulted from a decreasing geothermal gradient with time in the Mesozoic subduction zone of California at early or pre-Franciscan metamorphism.

Notes: Rocks within the Zermatt-Saas ophiolite of the western Alps have undergone eclogite facies metamorphism during subduction prior to the Alpine collision. The metamorphic history of these rocks is well defined, with eclogitic assemblages being followed by the limited growth of blueschist assemblages of glaucophane and paragonite. Subsequent greenschist alteration occurs adjacent to faults, veins and metasediments. Away from such sources of water, retrogression is very limited. Sm-Nd isotopic analyses of an essentially unretrogressed eclogitic metabasalt suggest that eclogite facies metamorphism occurred at 52 ± 18 Ma. The large uncertainty is due to the presence of very small amounts of Nd-rich epidote present as inclusions within garnet. As the closure temperature of garnet to Sm & Nd is thought to be 〉600d̀C, resetting due to post-high-pressure diffusion is thought to be insignificant. Given the fine-grained protolith to the sample analysed, and its extensive deformation under eclogite facies conditions, incomplete homogenization of pre-metamorphic isotopic variations is also considered unlikely to be responsible for the young age. A Tertiary age of eclogitization means that models of early Alpine evolution based on the cessation of high-pressure metamorphism in the Cretaceous need to be revised.

Notes: Porphyroblast inclusion fabrics are consistent in style and geometry across three Proterozoic metamorphic field gradients, comprising two pluton-related gradients in central Arizona and one regional gradient in northern New Mexico. Garnet crystals contain curved ‘sigmoidal’ inclusion trails. In low-grade chlorite schists, these trails can be correlated directly with matrix crenulations of an older schistosity (S1). The garnet crystals preferentially grew in crenulation hinges, but some late crenulations nucleated on existing garnet porphyroblasts. At higher grade, biotite, staurolite and andalusite porphyroblasts occur in a homogeneous S2 foliation primarily defined by matrix biotite and ilmenite. Biotite porphyroblasts have straight to sigmoidal inclusion trails that also represent the weakly folded S1 schistosity. Staurolite and andalusite contain distinctive inclusion-rich and inclusion-poor domains that represent a relict S2 differentiated crenulation cleavage. Together, the inclusion relationships document the progressive development of the S2 fabric through six stages. Garnet and biotite porphyroblasts contain stage 2 or 3 crenulations; staurolite and andalusite generally contain stage 4 crenulations, and the matrix typically contains a homogeneous stage 6 cleavage.The similarity of inclusion relationships across spatially and temporally distinct metamorphic field gradients of widely differing scales suggests a fundamental link between metamorphism and deformation. Three end-member relationships may be involved: (1) tectonic linkages, where similar P-T-time histories and similar bulk compositions combine to produce similar metamorphic and structural signatures; (2) deformation-controlled linkages, where certain microstructures, particularly crenulation hinges, are favourable environments for the nucleation and/or growth of porphyroblasts; and (3) reaction-controlled linkages, where metamorphic reactions, particularly dehydration reactions, are associated with an increase in the rate of fabric development. A general model is proposed in which (1) garnet and biotite porphyroblasts preferentially grow in stage 2 or 3 crenulation hinges, and (2) chlorite-consuming metamorphic reactions lead to pulses in the rate of fabric evolution. The data suggest that fabric development and porphyroblast growth may have been quite rapid, of the order of several hundreds of thousands of years, in these rocks. These microstructures and processes may be characteristic of low-pressure, first-cycle metamorphic belts.

Notes: Incipient metamorphism accompanying thrusting, folding and cleavage development has been investigated in a varied sequence of Palaeozoic sediments near the Variscan front in SW Dyfed, Wales. The aim was to evaluate a critical stage in the progression from heterogeneous sediment, whose detrital phases are neither in equilibrium with one another, nor with pore fluids, through indurated sedimentary rock to metamorphic rock comprising newly formed crystals that equilibrated with one another as they grew.Quartz veins are widely developed in the area, especially in the more psammitic lithologies, while finer grained rocks became cleaved during tectonic deformation. Mineralogical constraints and fluid inclusion measurements suggest maximum temperatures around 200-310d̀ C (slightly higher in the Marloes-Musselwick Thrust Sheet than in other parts of the structural succession) at depths of the order of 6-13 km.Quartz veins yield distinctly heavier oxygen isotopic compositions than detrital quartz grains in the adjacent wall rocks, although care must be taken in interpreting the data because slivers of detrital grains may become incorporated into veins, while matrix detrital grains may incorporate veinlets or rims of newly formed quartz. It is concluded that vein quartz grew in isotopic equilibrium with a fluid phase whose isotopic composition was primarily controlled by exchange with phyllosilicates, not detrital quartz grains. Vein and matrix quartzes from the Marloes-Musselwick Thrust Sheet are distinctly lighter (δ18Oveins=+14 to +18% and δ18Omatrix=+11 to +14%) than those from other thrust sheets (δ18O =+17 to +20% and +14 to +17%, respectively).We conclude that vein quartz and phyllosilicate grains in cleavage domains probably attained equilibrium with a locally buffered pore fluid at the peak of metamorphism, but many relict grains of different chemical and isotopic composition remained elsewhere in the rock. Local fluid migration along veins and through cleavage lamellae facilitated the attainment of equilibrium, but there is little evidence for large-scale infiltration of externally derived fluids. With further metamorphism the quartz in these rocks would attain an isotopic composition intermediate between that of the heavy vein material and light detritus which coexist here.

Notes: Abstract The enthalpy of reaction of plagioclase and pyroxene to produce garnet and quartz has been a major source of error in granulite geobarometry because of relatively uncertain enthalpy values available from high-temperature solution calorimetry and compiled indirectly from experimental phase equilibria. Recent, improved calorimetric measurements of ΔHR are shown to yield palaeopressures which are internally consistent between orthopyroxene and clinopyroxene calibrations for many South Indian granulites from the Archaean high-grade terranes of southern Karnataka and northern Tamil Nadu. This represents a considerable improvement over previous calibrations, which gave disparate results for the two independent barometers involving orthopyroxene and clinopyroxene, requiring a 2-kbar ‘empirical adjustment’to force agreement.Palaeopressures thus calculated for 30 well-documented two-pyroxene garnet granulites from South India give internally consistent pressures with a mean of 8.1°1.1 kbar at 750°C, consistent with the presence of both kyanite and sillimanite in many areas. Those samples for which garnet–pyroxene exchange thermometers give plausible granulite-range temperatures and whose minerals are minimally zoned give the best agreement of the two barometers. Samples which yield low palaeotemperatures and different rim and core compositions of minerals yield pressures for the orthopyroxene assemblage as much as 2 kbar lower than for the assemblage with clinopyroxene. This disparity probably represents post-metamorphic-peak re-equilibration. We conclude that considerable confidence may be placed in geobarometry of two-pyroxene granulites where apparent palaeotemperatures are in the granulite facies range (〉700°C) and where mineral zonation is minimal. Of the several possible sets of activity–composition relations in use, those constructed from analysis of phase equilibria give slightly higher palaeopressures and appear more consistent with analytical data from the Nilgiri Hills uplift, where kyanite is the only aluminium silicate reported to be stable in peak-metamorphic assemblages. The present results support a palaeopressure gradient, increasing generally from south to north, across the Nilgiri Hills as inferred by previous geobarometry.

Notes: Abstract A major episode of continental crust formation, associated with granulite facies metamorphism, occurred at 2.55–2.51 Ga and was related to accretional processes of juvenile crust. Dating of tonalitic–trondhjemitic, granitic gneisses and charnockites from the Krishnagiri area of South India indicates that magmatic protoliths are 2550–2530 ± 5 Ma, as shown by both U–Pb and 207Pb/206Pb single zircon methods. Monazite ages indicate high temperatures of cooling corresponding to conditions close to granulite facies metamorphism at 2510 ± 10 Ma. These data provide precise time constraints and Sr–Nd isotopes confirm the existence of late tonalitic–granodioritic juvenile gneisses at 2550 Ma. Pb single zircon ages from the older Peninsular gneisses (Gorur–Hassan area) are in agreement with some previous Sr ages and range between 3200 ± 20 and 3328 ± 10 Ma. These gneisses were derived from a 3.3–3.5-Ga mantle source as indicated from Nd isotopes. They did not participate significantly in the genesis of the 2.55-Ga juvenile magmas. All these data, together with previous work, suggest that the 2.51-Ga granulite facies metamorphism occurred near the contact of the ancient Peninsular gneisses and the 2.55–2.52-Ga ‘juvenile’tonalitic–trondhjemitic terranes during synaccretional processes (subduction, mantle plume?). Rb–Sr biotite ages between 2060 and 2340 Ma indicate late cooling probably related to the dextral major east–west shearing which displaced the 2.5-Ga juvenile terranes toward the west.

Notes: Abstract The formation of spiral-shaped inclusion trails (SSITs) is problematical, and the two viable models for their formation involve opposite shear senses along the foliation in which the porphyroblasts are growing. One model argues for porphyroblast rotation, with respect to a geographically fixed reference frame, whereas the other argues for no such porphyroblast rotation, but instead rotation of the matrix foliation around the porphyroblast. Thus, porphyroblasts with SSITs cannot be used as shear-sense indicators until it is conclusively determined which model best explains them.Any successful model must explain features associated with SSITs, including: (1) foliation truncation zones, (2) smoothly curving SSITs, (3) millipede microstructure, (4) total inclusion-trail curvature in median sections, (5) porphyroblasts with SSITs that have grown together, (6) evidence for relative porphyroblast displacements, (7) shear-sense indicators inside and outside porphyroblasts; (8) crenulations associated with porphyroblasts and (9) geometries in sections subparallel to spiral axes (axes of rotation). A detailed study of these features suggests that most, if not all, can be explained by both the rotational and non-rotational models, in spite of these models involving diametrically opposed movement senses. Therefore, geometrical analysis of individual porphyroblast microstructures may not determine which model best explains SSITs until the kinematics required to form these microstructures are better understood, in particular the sense of shear along a developing crenulation cleavage. Specific tests for determining the shear sense along crenulation cleavages are proposed, and results of such tests may conclusively resolve the debate over how SSITs form.

Notes: Abstract The Mesozoic Murihiku and Waipapa terranes are two accretionary wedges of linked forearc and trench sediments, respectively, that were juxtaposed in the early Cretaceous.Late Triassic to late Jurassic Murihiku terrane volcaniclastic sediments are folded into a regional syncline and have been diagenetically altered. There is a general relationship between zeolite occurrence, clay mineralogy, vitrinite reflectance and stratigraphic position. Youngest Jurassic sediments contain heulandite, analcime and stilbite, whereas late Triassic to mid-Jurassic sediments have laumontite and heulandite (in detail the zeolite distribution is complicated). Tuffaceous horizons on the eastern limb of the syncline are calcitized rather than zeolitized. Post-diagenetic fractures associated with uplift are laumontite-filled. The inferred geothermal gradient is c. 15° C km−1.The Waipapa terrane is an accretionary complex dominated by imbricated terrigenous sediments of Triassic and Jurassic age with enclosed Permian to Jurassic pelagic sediments and basalts. Late Jurassic sediments are massive volaniclastic sandstones. The sediments are non-foliated, and metamorphic minerals in the massive sandstones have crystallized in specific domains. The observed metamorphic succession of prehnite-pumpellyite and pumpellyite-actinolite facies assemblages was overprinted in the imbricated rocks during a thermal event that was late in the deformation sequence and broadly coincident with hydraulic fracturing and veining.The metamorphic successions in the two terranes and their relationships to structural features are in excellent accord with accretionary complex models.

Notes: Abstract The Siluro-Devonian Waits River Formation of north-east Vermont was deformed, intruded by plutons and regionally metamorphosed during the Devonian Acadian Orogeny. Five metamorphic zones were mapped based on the mineralogy of carbonate rocks. From low to high grade, these are: (1) ankerite-albite, (2) ankerite-oligoclase, (3) biotite, (4) amphibole and (5) diopside zones. Pressure was near 4.5kbar and temperature varied from c. 450° C in the ankerite-albite zone to c. 525° C in the diopside zone. Fluid composition for all metamorphic zones was estimated from mineral equilibria. Average calculated χco2[= CO2/(CO2+ H2O)] of fluid in equilibrium with the marls increases with increasing grade from 0.05 in the ankerite-oligoclase zone, to 0.25 in the biotite zone and to 0.44 in the amphibole zone. In the diopside zone, χCO2 decreases to 0.06.Model prograde metamorphic reactions were derived from measured modes, mineral chemistry, and whole-rock chemistry. Prograde reactions involved decarbonation with an evolved volatile mixture of χCO2 〉 0.50. The χCO2 of fluid in equilibrium with rocks from all zones, however, was generally 〈0.40. This difference attests to the infiltration of a reactive H2O-rich fluid during metamorphism. Metamorphosed carbonate rocks from the formation suggests that both heat flow and pervasive infiltration of a reactive H2O-rich fluid drove mineral reactions during metamorphism. Average time-integrated volume fluxes (cm3 fluid/cm2 rock), calculated from the standard equation for coupled fluid flow and reaction in porous media, are (1) ankerite-oligoclase zone: c. 1 × 104; (2) biotite zone: c. 3 × 104; (3) amphibole zone: c. 10 × 104; and diopside zone: c. 60 × 104. The increase in calculated flux with increasing grade is at least in part the result of internal production of volatiles from prograde reactions in pelitic schists and metacarbonate rocks within the Waits River Formation.The mapped pattern of time-integrated fluxes indicates that the Strafford-Willoughby Arch and the numerous igneous intrusions in the field area focused fluid flow during metamorphism. Many rock specimens in the diopside zone experienced extreme alkali depletion and also record low χCO2. Metamorphic fluids in equilibrium with diopside zone rocks may therefore represent a mixture of acid, H2O-rich fluids given off by the crystallizing magmas, and CO2-H2O fluids produced by devolatilization reactions in the host marls. Higher fluxes and different fluid compositions recorded near the plutons suggest that pluton-driven hydrothermal cells were local highs in the larger regional metamorphic hydrothermal system.

Notes: Abstract Natural, pure CO2 inclusions in quartz and olivine (c. Fo90) were exposed to controlled fH2 conditions at T= 718–728°C and Ptotal= 2 kbar; their compositions were monitored (before and after exposures) by microsampling Raman spectroscopy (MRS) and microthermometry. In both minerals exposed at the graphite–methane buffer (fH2= 73 bar), fluid speciations record the diffusion of hydrogen into the inclusions. In quartz, room-temperature products in euhedral isolated (EI type) inclusions are carbonic phases with molar compositions of c. CO2(60) + CH4(40) plus graphite (Gr) and H2O, whereas anhedral inclusions along secondary fractures (AS type) are Gr-free and contain H2O plus carbonic phases with compositions in the range c. CO2(60) + CH4(40) to CO2(10) + CH4(90). EI type inclusions in olivine evolved to c. CO2(90–95) + CH4(5–10) without Gr, whereas AS type inclusions have a range of compositions from CO2(90) + CH4(10) ± Gr to CH4(50) + H2(50) ± Gr; neither H2O nor any hydrous species was detected by optical microscopy or MRS in the olivine-hosted products. Differences in composition between and among the texturally distinct populations of inclusions in both minerals probably arise from variations in initial fluid densities, as all inclusions apparently equilibrated with the ambient fH2. These relations suggest that compositional variability among inclusions in a given natural sample does not require the entrapment of multiple generations of fluids. In addition, the absence of H2O in the olivine-hosted inclusions would require the extraction of oxygen from the fluids, in which case re-equilibration mechanisms may be dependent on the composition and structure of the host mineral.Many of the same samples were re-exposed to identical P–T conditions using Ar as the pressure medium, yielding ambient fH2= 0.06 bar. In most inclusions, the carbonic fluids returned to pure CO2 and graphite persisted in the products. Reversal of the mechanisms from the prior exposure at fH2= 73 bar did not occur in any inclusions but the AS types in olivine, in which minor CO2 was produced at the expense of CH4 and/or graphite. The observed non-reversibility of previous mechanisms may be attributed to: (1) slower fluid–solid reactions compared to reactions in the homogeneous fluid phase; (2) depressed activities of graphite due to poor ordering; and/or (3) low ambient fO2 at the conditions of the second run.

Notes: The Whitestone Anorthosite (WSA), located in southern Ontario, underwent granulite facies metamorphism during the Grenville orogeny at 1.16 Ga. During the waning stages of metamorphism fluids infiltrated the outer portions of the anorthosite and promoted the formation of an envelope comprised of upper amphibolite facies mineral assemblages. Also, this envelope corresponds to portions of the anorthosite that underwent deformation related to movement along a high-grade ductile shear zone. Samples from this portion of the anorthosite (the margin) contain CO2-rich inclusions in plagioclase porphyroclasts (relict igneous phenocrysts), matrix plagioclase and garnet. These inclusions have features which normally are interpreted as indicating that they are texturally primary, but they have relatively low CO2 densities (0.61–0.95 g cm-3). Plagioclase from the anorthosite interior contains texturally secondary inclusions with relatively high CO2 densities (generally from 0.99 to 1.10 g cm-3). The high CO2 densities suggest that the inclusions in the plagioclase of the anorthosite core formed prior to inclusions in porphyroclast minerals of the outer portions of the anorthosite, an interpretation that is apparently inconsistent with inclusion textures. This apparent paradox indicates that most fluid inclusions from the anorthosite margin were formed during, or were modified by, the dynamic recrystallization that affected this portion of the WSA. In either case, late formation or modification, the texturally primary fluid inclusions do not contain pristine samples of the peak metamorphic fluid. Furthermore, because shear-related deformation is apparently associated with entrapment of the lowest fluid densities, some strain localization persisted to relatively low temperatures (e.g. less than approximately 500° C). These results constrain a part of the retrograde P–T path for this portion of the Grenville Orogen to temperatures of approximately 400–500° C at pressures of approximately 1–2 kbar.

Notes: A suite of metapelites, charnockites, calc-silicate rocks, quartzo-feldspathic gneisses and mafic granulites is exposed at Garbham, a part of the Eastern Ghats granulite belt of India. Reaction textures and mineral compositional data have been used to determine the P–T–X evolutionary history of the granulites. In metapelites and charnockites, dehydration melting reactions involving biotite produced quartzofeldspathic segregations during peak metamorphism. However, migration of melt from the site of generation was limited. Subsequent to peak metamorphism at c. 860° C and 8 kbar, the complex evolved through nearly isothermal decompression to 530–650° C and 4–5 kbar. During this phase, coronal garnet grew in the calc-silicates, while garnet in the presence of quartz broke down in charnockite and mafic granulite. Fluid activities during metamorphism were internally buffered in different lithologies in the presence of a melt phase. The P–T path of the granulites at Garbham contrasts sharply with the other parts of the Eastern Ghats granulite belt where the rocks show dominantly near-isobaric cooling subsequent to peak metamorphism.

Notes: Staurolite porphyroblasts, 1.5–8cm in length and 0.3–2cm in width, in the Littleton Schist at Bolton, Connecticut, contain curved quartz inclusion trails which document synkinematic rotations of at least 135°. The orientations of long axes of these staurolite crystals define a weak preferred orientation in a plane approximately parallel to the external foliation. Serial sections of four differently orientated crystals and U-stage measurements of the orientations of their inclusion trails demonstrate that the inflection hinge line and the statistical ‘symmetry axis’ characterizing the foliation within a porphyroblast are unrelated to the orientations of external crenulations and are, in all cases, parallel to the long axis of the porphyroblast. The cumulative rotation reflected in the curvature of the inclusion trails is a maximum in a c-axis section through the initial core of a crystal. The amount of rotation about the c-axis decreases linearly along the length of the crystal away from the nucleation site.The sense and amount of rotation recorded by a porphyroblast is related to its orientation. A tightly constrained transition from clockwise to anticlockwise rotation defines a slip direction that coincides with the preferred orientation of the staurolite c-axes. The total rotation reflected by the inclusion trails increases as a function of the angle between the c-axes of the staurolite crystals and the slip direction.Initially random staurolite porphyroblasts rotated during growth, as a consequence of laminar shear in the surrounding viscous matrix. This interpretation is quantitatively consistent with: the staurolite preferred orientation; its coincidence with the apparent slip direction; the correlation between both the sense and the amount of rotation and the orientation of the long axis of the porphyroblast; and the twisted conical shape of the family of surfaces defined by the inclusion trails.

Notes: Silica-deficient sapphirine-bearing rocks occur as an enclave within granulite facies Proterozoic gneisses and migmatites near Grimstad in the Bamble sector of south-east Norway (Hasleholmen locality). The rocks contain peraluminous sapphirine, orthopyroxene, gedrite, anthophyllite, sillimanite, sapphirine, corundum, cordierite, spinel, quartz and biotite in a variety of assemblages. Feldspar is absent.Fe2+/(Fe2++ Mg) in the analysed minerals varies in the order: spinel 〉 gedrite ≥ anthophyllite ≥ biotite 〉 sapphirine〉orthopyroxene 〉 cordierite.Characteristic pseudomorph textures indicate coexistence of orthopyroxene and sillimanite during early stages of the reaction history. Assemblages containing orthopyroxene-sillimanite-sapphirine-cordierite-corundum developed during a high-pressure phase of metamorphism and are consistent with equilibration pressures of about 9 kbar at temperatures of 750–800°C. Decompression towards medium-pressure granulite facies generated various sapphirine-bearing assemblages. The diagnostic assemblage of this stage is sapphirine-cordierite. Sapphirine occurs in characteristic symplectite textures. The major mineralogical changes can be described by the discontinuous FMAS reaction: orthopyroxene + sillimanite → sapphirine + cordierite + corundum.The disequilibrium textures found in the Hasleholmen rocks are characteristic for reactions which have been in progress but then ceased before they run to completion. Textures such as reaction rims, symplectites, partial replacement, corrosion and dissolution of earlier minerals are characteristic of granulite facies rocks. They indicate that, despite relatively high temperatures (700–800° C), equilibrium domains were small and chemical communication and transport was hampered as a result of dry or H2O-poor conditions.

Notes: The Vredefort dome (2.0 Ga) represents the central uplift of a very large impact structure. This uplift exposed a nearly complete cross-section through the continental crust in the region, which is 25–30 km thick. Two metamorphic events took place at about the same time as the impact. The first event, so-called static metamorphism, is pre-impact and produced lithologies varying from low-grade shale to high-grade hornfels. It resembles contact metamorphism by its lack of schistosity, but is more regional as it extends over a large area and is not associated with large intrusions.The second event, the post-shock metamorphism, is responsible for the recrystallization of the shock features. The investigation of this event has been focused on the degree of alteration of the coesite-stishovite-bearing pseudotachylite veins that formed during the transit of the shock wave. These high-pressure silica polymorphs are only present in the upper part of the stratigraphic sequence; downward they have been converted to fibrous quartz. At the highest grade, the fibrous quartz is in turn replaced by triple-junctioned mosaic quartz. The post-shock metamorphism was generated by the heat of the rock before shock, plus the heat released by the shock wave. The isograds, plotted on a map, can be translated into depth of burial and therefore provide valuable information regarding the geological setting immediately before impact. At the time of impact, the rocks were relatively cool and the static metamorphism had ceased with several tens of millions of years separating the two metamorphic events. The static metamorphism was probably caused by continental crustal extension in a stress-free environment and the lack of deformation is probably due to rapid uplift during the later stages of the impact event.