ALBERT

Beschreibung: This paper provides a brief overview of recent developments and debates concerned with suburbanisation in continental Europe. While current discourses in urban research and practice still focus on processes of reurbanisation and the gentrification of inner-city areas, suburbia continues to exist and thrive. Depending on the definition applied, suburban areas still attract a large share of in-migration and employment growth in cities of the developed countries. Given that popular meta-narratives on suburbia and suburbanisation are often spurred by, or refer to, North American suburban studies, we take a different perspective here, one based on continental European trajectories of development in and across city-regional areas that are considered to be suburban, and on social processes that are associated with suburbanisation (suburbanisms). Thus, we aim to avoid a biased understanding of suburbia as a spatial category, which is often considered mono-functional, non-sustainable, or in generic decline. Instead, we observe that suburban variety is huge, and the distinction between urban core and fringe seems to be as ambiguous as ever. The paper, which also introduces the theme of this special issue of “Raumforschung und Raumordnung | Spatial Research and Planning”, bundles our findings along four themes: on suburbia as a place of economic development, on the shifting dynamics of housing between core and fringe locales, on the life-cyclic nature of suburbanisation, and on strategies for redevelopment. Finally, we discuss certain topics that may deserve to be addressed by future research, particularly on the European variant of suburbanisation and suburbs.

Beschreibung: This paper takes a spatially differentiated and temporally variegated perspective on suburban areas. It proposes a conceptual framework for studying the temporal variation and related trajectories of the subject matter, with suburban lifecycles being the key to our analysis. In empirical terms, the paper summarises the findings of research undertaken in 12 selected locales of four major metropolitan regions in Germany. Against the background of assessing the broader socioeconomic development of these regions, detailed local case studies have been conducted in order to reconstruct past and current development trajectories. Our analyses detected particular life cycles (and related segments) in the study areas, based on age and social composition, the physical conditions of the built environment and broader developments in the real-estate market. The different cycles include, in most cases, growth, maturity, transition and resilience, and they are also discussed in terms of their relevance for strategies responding to recent changes.

Beschreibung: Zusammenfassung Staatliche Steuerungsinstrumente sind für die Diffusion von erneuerbaren Stromerzeugungstechnologien von zentraler Bedeutung. Mit ihnen können politisch erwünschte und vom Markt unzureichend berücksichtigte Effekte (z. B. Emissionsreduzierung) gefördert werden. Dieser Zusammenhang lässt sich am Beispiel des Ausbaus der Offshore-Windenergie in Deutschland zeigen: Mit der Implementierung des Erneuerbare-Energien-Gesetzes (EEG) im Jahr 2000 sollten durch finanzielle Anreize und planerische Freiheiten für Projektentwickler geeignete Rahmenbedingungen für einen Ausbau der Offshore-Windenergie geschaffen werden. Allerdings – so die grundlegende These dieses Beitrags – waren die in der Anfangsphase des Ausbaus implementierten Steuerungsinstrumente nicht nur ungeeignet, um zentrale Hindernisse zu beseitigen, sondern sie verhinderten darüber hinaus vielmehr eine zügige Entwicklung: Insbesondere die fehlende räumliche Steuerung in der Anfangsphase des Ausbaus förderte Nutzungs- und Naturschutzkonflikte und begünstigte einen ,Wildwuchs‘ der Offshore-Windparks, der einer effizienten Netzanbindung entgegenstand. Durch Modifikation bestehender und der Implementierung neuer Steuerungsinstrumente versuchten die staatlichen Akteure, die Rahmenbedingungen für den Ausbau zu verbessern. Diese Steuerungsversuche werden aus einer Innovationsperspektive mit Hilfe der Konstellationsanalyse analysiert. Hierbei wird – basierend auf einer Dokumentenanalyse und Expertengesprächen – gezielt das Wirkungsgefüge von staatlichen Steuerungsversuchen und sozioökonomischen, technischen und natürlichen Einflussfaktoren untersucht. So kann gezeigt werden, dass erst durch langwierige Lern- und Aushandlungsprozesse Steuerungsinstrumente implementiert wurden, mit denen geeignete Rahmenbedingungen für den Ausbau der Offshore-Windenergie in Deutschland geschaffen werden konnten.

Beschreibung: Zusammenfassung In der Diskussion über die aktuellen Tendenzen der Binnenmigration der älteren Generation gibt es eine Kontroverse über einen möglichen Trendwechsel. Für frühere Generationen von Personen im Ruhestand ist in vielen Untersuchungen (in verschiedenen Ländern) nachgewiesen worden, dass ihre Umzüge eine Art counterurbanisation waren. Im Saldo zog die ältere Bevölkerung aus den Kernen der Agglomerationen an die Peripherie oder generell aus den Städten in die ländlichen Regionen. Strittig ist nun, ob es dieses Muster der Ruhestandsmigration weiterhin gibt, oder ob es neuerdings auch die Älteren zurück in die Städte zieht. Obwohl dieser neue Trend in den Medien, in der Politik und in der Immobilienwirtschaft häufig als Tatsache hingestellt wird, gibt es wenig empirische Belege dafür. In der hier vorgestellten Untersuchung wird der Frage nach dem Trendwechsel zur Reurbanisierung mit einer Aggregatdaten-Analyse nachgegangen. Basis ist eine Auswertung der Indikatoren und Karten zur Raum- und Stadtentwicklung (INKAR) für die Periode 1995-2012. Ergebnis der Analysen ist, dass es in Deutschland in der Tat einen bemerkenswerten Strukturwandel der Ruhestandsmigration gibt. Die ,Stadtflucht‘ der Senioren ist deutlich zurückgegangen und es gibt immer mehr Großstädte (insbesondere in Ostdeutschland), die für diese Bevölkerungsgruppe positive Migrationssalden aufweisen.

Beschreibung: Zusammenfassung Einwohnermeldedaten können einen wichtigen Beitrag zur Unterstützung der raumbezogenen Planung in ländlichen Gemeinden leisten. Das zeigen mehrere Studien, die sich in den vergangenen Jahren mit demographischen Veränderungsprozessen und Versorgungsbedarfen in Deutschlands ländlichem Raum auseinandergesetzt haben. Gemeinsam ist diesen, meist einzelfallbezogenen Untersuchungen, die Geokodierung kommunaler Melderegister und ihre analytische Verarbeitung mittels Geographischen Informationssystemen. Auf diese Weise lassen sich Bevölkerungsstrukturen und ihre Veränderungen auch unterhalb der Gemeindeebene auflösen und in Analysen nutzen, während Bevölkerungsdaten der überkommunalen statistischen Stellen dies in der Regel nicht vermögen. Dieser Beitrag greift Erkenntnisse aus diesen Studien auf. Er verbindet sie zu einem Argumentationsstrang, der Mehrwerte des Ansatzes sowohl für die kommunale als auch die regionale Ebene aufzeigt und anhand von Beispielen aus Bayern und Sachsen-Anhalt entwickelt wird. Neben allgemeinen demographischen Aspekten werden dabei auch „Erreichbarkeiten“ und „Immobilien“ – als mit demographischen Prozessen in Zusammenhang stehende Themenfelder – behandelt. Die Darstellung der Mehrwerte, die zu einer stärkeren Nutzung von Melderegistern in Wissenschaft und planerischer Praxis motivieren möchte, wird ergänzt um eine Diskussion über die Grenzen des verfolgten Ansatzes im Hinblick auf zukünftige Bevölkerungsentwicklungen. Durch das Aufzeigen sowohl von Mehrwerten als auch von Grenzen der Nutzung geokodierter kommunaler Bevölkerungsdaten möchte der Beitrag zudem die Umsetzung von Digitalisierungsstrategien in der Planung ländlicher Räume unterstützen.

Beschreibung: Zusammenfassung Der langjährige Trend zum wachsenden Wohnflächenkonsum pro Kopf hält in der Schweiz an. Neben strukturellen Treibern ist auch der Überkonsum von Wohnraum für diese Entwicklung verantwortlich. Nach einer theoretischen Einführung wird in diesem Beitrag in einem ersten Schritt ein empirisches Modell zur Erklärung des subjektiven Überkonsums von Wohnfläche vorgestellt. Dabei werden haushalts-, wohnobjekt- sowie wohnortspezifische Bestimmungsfaktoren als erklärende Variablen in die Analyse einbezogen. Die Stichprobe basiert auf dem Schweizer Haushaltspanel, welches direkte Informationen zum subjektiven Überkonsum enthält. Fast 10 Prozent der Schweizer Haushalte betrachten ihr Wohnobjekt als zu groß. Diese Haushalte unterscheiden sich signifikant in Bezug auf die Mehrzahl der betrachteten Bestimmungsfaktoren von jenen Haushalten, welche ihr Wohnobjekt als nicht zu groß ansehen. Neben anderen Bestimmungsfaktoren geht aus den Logit-Schätzungen hervor, dass der subjektive Überkonsum insbesondere bei älteren Haushalten sowie bei Einpersonenhaushalten ausgeprägt ist. In einem zweiten Schritt wird im Rahmen einer Fallstudie für die Stadt Luzern ein Ansatz basierend auf bedingten Wahrscheinlichkeiten vorgeschlagen, um den subjektiven Überkonsum auf Quartiersebene zu schätzen, wenn im Datensatz keine direkten Angaben dazu vorliegen. Aus den Analysen geht hervor, dass 6 Prozent der Luzerner Haushalte ihr Wohnobjekt als zu groß betrachten. Weiter weisen die einzelnen Quartiere in Bezug auf den Überkonsum eine relativ hohe Heterogenität auf. Allfällige wirksame Maßnahmen zur Reduktion des subjektiven Überkonsums müssen daher lokal verankert sein.

Beschreibung: The paper presents tests set-ups for experiments on sorption kinetics and gas filtration kinetics in a porous medium. It was observed that two phenomena occur in these processes: transportation of gas into the porous solid and settling of gas molecules on the walls of the solid or within its volume. An experiment was carried out in which a thin resistance thermometer was quickly taken out of an argon stream and placed in carbon dioxide or the other way round. The measurement made it possible to determine the sorption time constant. It was demonstrated that the sorption rate is much higher than the filtration rate. Thus, filtration is the process describing the rate at which gas molecules penetrating the porous substance are adsorbed or desorbed. The sorption time constant is not 〉50 m.In the second experiment, the author determined the rate at which gas is liberated from coal grains. The measurement method was based on measurement of the pressure of desorbing gas in constant volume. The experiment involved measurement of the pressure of the gas liberated from the coal grains in a closed chamber. The kinetic curves obtained in this way were used to determine the carbon dioxide coefficient in coal grains. During the experiment, particular focus was put on the initial stage of gas liberation (up to 0.4 s).The slower process of gas transporting in the porous structure of coal is the transporting of gas through a coal briquette. Experimentally implemented variety of boundary conditions allowed for a more complete verification of the assumed theoretical model and possibly for the exact determination of filtration parameters. The experimental set-up built for this purpose, allows for pressure and temperature measurement on the briquette side surface.

Beschreibung: In this work, the input-output method of dynamic parameters' identification is experimentally tested. A method based on the transformation of a dynamic problem into a static problem by means of integration of the input and output signal was presented. The problem discussed in this article is the identification of the coefficients of stiffness matrices and eigenfrequencies of a discrete dynamic system subjected to kinematic input. The experimental analysis was carried out on a three-storey slab-and-column structure, which constitutes a physical model of a building. The vibrations of the model were excited kinematically by an earthquake simulator. The device has a computer-controlled, movable table top, which can move independently in three directions, that is, horizontally, vertically, and rotationally around the vertical axis.The aim of the experimental studies presented in this work was to determine the dynamic parameters of the model (stiffness, natural frequencies) using the input-output method in the time domain. Moreover, the results obtained with this method were compared with the results of experimental modal analysis (EMA) in order to verify their correctness. It was assumed that the movement of the base is horizontal and occurs in one direction. Two short-term, irregular kinematic excitations of the construction were considered, and the selected results and conclusions from experimental analyses were presented in this work.

Beschreibung: The article presents the analysis of complex stress states in the concrete structure of grain silos, caused by non-centric emptying. The authors present a combination of loads from the pressure of bulk solid on the silo chamber according to Eurocode 1, Part 4 [11], which should be taken into account when emptying on large eccentricities in action assessment class 3 (AAC3) silos. For the example of a cylindrical wheat silo with a height of 25 m and a diameter of 10 m, the researchers carried out an analysis regarding the impact of the size of the eccentric discharge outlet on the distributions of forces and bending moments in a reinforced concrete wall.

Beschreibung: This paper analyses the effects of loads that change their location, i.e. moving but quasi-static loads. Displacements defining the deformation of the soil–steel structure’s shell buried in soil are calculated from the results of measurements performed using a dense grid of points located on the circumferential section of the corrugated plate. In this way, all the components of the structure, namely the corrugated plate, the backfill and the pavement with its foundation, as well as the natural (real) principles of their interaction, are taken into account in the solution. In the proposed algorithm, unit strains are converted into displacements, whereby results as accurate as the ones obtained by direct experimental measurements are obtained. The algorithm’s main advantages are that the number of points is limitless, they are regularly distributed on the circumferential section of the shell and any displacement directions can be obtained. Consequently, the deformations of the shell can be faithfully reproduced. The algorithm’s convenient feature is that one can use a simplified computational diagram of the shell in the form of a beam having the shape of the shell in 2D space (without the other components of the soil–steel structure). The advantage of this measuring method (electric resistance tensometry) is that there is no need to build the solid scaffold used for displacement measurements. The research focuses on the analysis of the displacements and the unit strains arising during the primary and secondary (return) travel of the load.

Beschreibung: In this article, the stress–dilatancy relationship for crushed latite basalt is analysed by using Frictional State Theory. The relationship is bilinear, and the parameters α and β determine these two straight lines. At the initial stage of shearing, the mean normal stress increment mainly influences breakage, but at the advanced stage, it is shear deformation that influences breakage. At the advanced stage of shearing, the parameter αpt represents energy consumption because of breakage and βpt mainly represents changes in volume caused by breakage during shear. It is also shown that breakage effect is significant at small stress levels and the η-Dp plane is important to fully understand the stress–strain behaviour of crushed latite basalt in triaxial compression tests.

Beschreibung: A three-dimensional finite element technique was used to analyse single pile lateral response subjected to pure lateral load. The main objective of this study is to assess the influence of the pile slenderness ratio on the lateral behaviour of single pile. The lateral single pile response in this assessment considered both lateral pile displacement and lateral soil resistance. As a result, modified p-y curves for lateral single pile response were improved when taking into account the influence lateral load magnitudes, pile cross sectional shape and flexural rigidity of the pile. The finite element method includes linear elastic, Mohr-Coulomb and 16-nodes interface models to represent the pile behaviour, soil performance and interface element, respectively. It can be concluded that the lateral pile deformation and lateral soil resistance because of the lateral load are always influenced by lateral load intensity and soil type as well as a pile slenderness ratio (L/D). The pile under an intermediate and large amount of loading (in case of cohesionless soil) has more resistance (low lateral displacement) than the pile embedded on the cohesion soil. In addition, it can be observed that the square-shaped pile is able to resist the load by about 30% more than the circular pile. On the other hand, pile in cohesionless soil was less affected by the change in EI compared with that in cohesive soil.

Beschreibung: Back in the early 1980s, coal deposits occurring at depths of ~700 m below surface were already regarded as large-depth deposits. Meanwhile, today the borderline depth of large-depth mining has extended to 〉1,000 m. Design, excavation and maintenance of mining roadways at the depth of 〉1,000 m have, therefore, become crucial issues in a practical perspective in recent years. Hence, it is now extremely important to intensify research studies on the influence of large depths on the behaviour of rock mass and deformation of support in underground excavations. The paper presents the results of the study carried out in five mining excavations at depths ranging from 950 to 1,290 m, where monitoring stations with measurement equipment were built. The analysis of data from laboratory and coal mine tests, as well as in situ monitoring, helped to formulate a set of criteria for stability assessment of underground excavations situated at large depths. The proposed methodology of load and deformation prediction in support systems of the excavations unaffected by exploitation is based on the criteria referring to the depth of excavation and the quality of rock mass. The depth parameter is determined by checking whether the analysed excavation lies below the critical depth, whereas the rock mass quality is determined on the basis of the roof lithology index (WL) and the crack intensity factor (n)

Beschreibung: In the study described here model calibration was performed employing the inverse analysis using genetic algorithms (GA). The objective of analysis is to determine value of the coefficient of hydraulic conductivity, k. The commonly used method for the determination of coefficient of hydraulic conductivity based on Terzaghi consolidation leads to an underestimation of the value of k as the Terzaghi model does not take into account the deformation of soil skeleton. Here, an alternative methodology based on genetic algorithms is presented for the determination of the basic parameters of Biot consolidation model. It has been demonstrated that genetic algorithms are a highly effective tool enabling automatic calibration based on simple rules. The values of the coefficient of hydraulic conductivity obtained with GA are of at least one order smaller than values obtained with the Terzaghi model.

Beschreibung: Road embankments, especially their slopes’ surfaces, must fulfil all the requirements concerning the exploitation criteria after the completion of construction works. This is very important while constructing or modernizing the embankments, based on the substrate including low-strength soils as well as in simple ground conditions (most convenient). The last dozen or so years of intensive construction of transport infrastructure have shown how big is the problem of ensuring the required volumes of qualified soil material for the construction of road embankments or the modernization of railway embankments. The depleting deposits of natural and easily accessible soils for the construction of embankments result in the need to use anthropogenic soils, for example, in the form of aggregates from the recycling of construction waste and other locally available waste materials, usually in the form of slag and ashes from the combined heat and power plants. In such cases, there’s a need to treat transportation earth structures individually in the scope of designing and quality control, because there are no applicable standard provisions in this scope.This work indicates some of these important contemporary problems of transport engineering, occurring in newly built and modernized road objects, such as the stability of road embankments based on a low-strength substrate, use of anthropogenic soils and materials originating from the recycling of concrete surfaces for the construction of road embankments.

Beschreibung: The objective of this research was to investigate the effect of adding thermally treated clay on some engineering properties of the untreated expansive clayey soil. Three expansive clayey soil samples obtained from three different sites in the south of Syria have been investigated. They were thermally treated up to three different levels (450°C, 650°C and 850°C) for 3 hours. Three replacement levels of thermally treated clay were used, i.e. 0%, 10% and 20%. The X-ray diffractometer (XRD) technique has been used to detect the crystalline and glassy phase in the clayey samples before and after the thermal treatment. Pozzolanic activity of the thermally treated clayey soil has been studied using the modified Chapelle test and the mechanical strength test at each of the temperature levels. Atterberg limits, compaction, free swell, swelling pressure and linear shrinkage have particularly been investigated. Test results revealed the positive effect of thermally treated clay when added to the natural soil. Plasticity index (PI) was reduced by about 60% when 20% thermally treated clay was added to the natural soil. In addition, 6% lime was added to further investigate the combined effect of lime and calcined clay on the properties of the clayey expansive soil. All investigated properties were significantly improved when 20% thermally treated soil and 6% lime were added together. For instance, swelling pressure and linear shrinkage values were reduced to less than 15% or even much less when compared with those of the natural soil. Scanning electron microscopy (SEM) and energy-dispersive X-ray (EDX) analysis were employed as well.

Beschreibung: In the method of steel tank erection, consisting in assembling the roof and the next courses (segments) of the shell at the ground level, starting from the top one (the so-called hydraulic jacking-up method), the assembled part of the tank is lifted using assembly supports (towers, trestles), hydraulic jacks and ropes. Supports are located inside or outside the tank, and their bases are usually not anchored. During the assembly work, numerous contaminations can appear under the bases of the supports; therefore, boundary conditions of the system consisting of the elevated tank and assembly supports may change, influencing the field of displacements and stresses in the elements of this system. This article presents the results of numerical tests of an exemplary mounted tank – mounting support system – at various possible coefficients of friction between the bases of the supports and the ground. The influence of the support conditions on the effort of the essential elements of the system was assessed. Calculation difficulty was noted to determine the directions of horizontal responses of the supports. It was assumed that these directions did not change after exceeding the values of the friction forces. The analysed tank collapsed during its erection.

Beschreibung: Some important modern problems of the transport engineering, which occur in the newly built and modernised road objects, have been indicated in the work. A discussion was conducted regarding the methods of assessing the stability of slopes of the road embankments, the obtained stability margins and the interpretation of obtained results in the specific cases of foundations of the road earth structures. Presented observations result from analysing the stability assessments of slopes of the road embankments, which was conducted on many communication objects, characterised by high variability of foundation conditions.

Beschreibung: This paper discusses the issues associated with the influence of underground mining operations on sewage pipelines built using the pipe jacking method. At present, to build sewage pipelines, especially in urban areas and deep embedment, trenchless technologies are employed. Mainly in these technologies, pipes are jacked into a bored tunnel using hydraulic jacks. These methods are also applied in mining areas.The aim of this paper is to analyse the influence of ground deformation, caused by mining operations, on sewage pipelines built using the pipe jacking method. The type of pipelines discussed here is built with butted sections, which cannot compensate the influences of mining operations in pipe joints if horizontal compression occurs in the near-surface layer of soil. Pipelines embedded in trenches in the mining areas are secured against the influence of mining operations with expansion joints, which compensate for ground deformation. Hence, in the analysis of the influence of soil deformation caused by mining on sewage pipelines built using jacking method, special attention was paid to the performance of pipe joints. Pipelines of the type are subjected to additional loads and displacements, caused by soil deformations like horizontal strains, horizontal soil displacements and surface curvatures. We propose a way to consider the influence of mining operations on sewage pipelines built using the pipe jacking method.

Beschreibung: Diaphragm walls are deep embedded earth retaining structures. They also act as a part of the foundation. Geotechnical codes of practice from various countries provide procedures for the analysis of deep foundations. Not many standards are available that directly regulate the analysis of diaphragm walls. This paper compares the analysis of diaphragm walls performed using the foundation codes of different countries. Codes including EN 1997-1, BS 8002, BS 8004, BS EN 1538, AASHTO LRFD Bridge Design Specifications, AS 4678, AS 5100.3, Canadian Foundation Engineering Manual, CAN/CSA S6, IS 9556 and IS 4651 are chosen for the study. Numerical studies and calculations are done using the finite element software Plaxis 2d. Comparative study is performed based on the values of displacements and the forces developed. Study also evaluates the effect of differences in partial safety factors. The outcome of research emphasises the need for development of comprehensive analysis procedures.

Beschreibung: In the paper, the influence of different types of bedding and backfill soil surrounding underground sewage duct on its deformation was analysed. Impact of increased soil lateral pressure was examined by considering the construction of an embankment nearby the underground pipeline. Numerical computations of three different variants of bedding and backfill soil surrounding the pipe were carried out. Displacements and deformation of the pipe were calculated using the finite element method with adoption of elastic-perfectly plastic constitutive model of soil. Subsequent stages of the construction were taken into account. Shear strength reduction method was applied to evaluate the factor of safety of the entire system. Finally, the results and conclusions were depicted.

Beschreibung: Nonlinear soil–linear structure computational strategy is commonly accepted in the community of geotechnical engineers using advanced finite element software for solving complex soil–structure interaction problems. However, further design procedure of the structural elements is carried out using increased values of the computed elastic stress resultants. It is absolutely not clear whether this method is conservative and, therefore, whether safe or not. To tackle this problem, a fully consistent nonlinear analysis of a deep excavation protected by the diaphragm wall is analysed here. The subsoil is modelled using the Hardening Soil model, while reinforced concrete is modelled using the modified Lee–Fenves model enhanced by the Eurocode 2 (EC2)-compatible creep module, developed by the author. It is shown that the commonly used nonlinear soil–linear structure computational strategy may yield insufficient amount of reinforcement from the ultimate limit state (ULS) and serviceability limit state (SLS) points of view. A consistent and conservative method of combining fully nonlinear analysis and the rules imposed by the EC2 is proposed.

Beschreibung: Ground improvement with granular piles increases the load-carrying capacity, reduces the settlement of foundations built on the reinforced ground and is also a good alternative to concrete pile. Granular piles or stone columns are composed of granular material, such as crushed stone or coarse dense sand. An analytical approach based on the continuum approach is presented for the non-linear behaviour of the granular pile. The formulation for pile element displacement is done considering the non-homogeneity of the granular pile as it reflects the true behaviour and also accounts for the changes in the state of the granular pile due to installation, stiffening and improvement effects. The present study shows that the settlement influence factor for an end-bearing granular pile decreases with increase in the relative stiffness of the bearing stratum. The settlement influence factor decreases with increase in linear and non-linear non-homogeneity parameters for all values of relative length. For a shorter pile, the rate of decrease of the settlement influence factor is greater in comparison to that for a longer pile. Shear stress at the soil–granular pile interface reduces in the upper compressible portion of the granular pile and increases in the lower stiffer portion of the granular pile due to the non-homogeneity of an end-bearing granular pile.

Beschreibung: This paper shows an example of the grouping of piezocone penetration test (CPTU) characteristics using functional data analysis, together with the results of clustering, in the form of a subsoil rigidity model. The subsoil rigidity model was constructed based on layer separation using the proposed method, as well as the k-means method. In the construction of the subsoil rigidity model, the constrained modulus M was applied. These moduli were determined from empirical relationships for overconsolidated and normally consolidated soils from Poland based on cone tip resistance.

Beschreibung: The most important piece of road infrastructure is bridges. Wooden bridges have advanced constantly during the past decades. The trend began in Scandinavian countries but has also now gained significant ground in Russia. This research studies experimental endurance potential of the joints of the wooden beam while considering the coefficient of asymmetry of the cycle, which corresponds to the actual operating conditions. Performance analysis of the composite bars is carried out based on the experiment; the development of a special methodology for calculating the joints of wooden elements with the dowel plates for their better endurance is also introduced in this paper. The results of experimental studies on the performance of bending composite wooden bridge bars based on dowel plates operating under cyclic influences thus determine the endurance limit of wood for composite wooden bridge beams based on dowel plates. The calculation technique and interdependence of the endurance coefficient affecting the asymmetry coefficient of the bent composite wooden bridge bars on the dowel plates under cyclic loading are considered. The experimental data on the endurance of composite wooden bridge beams have been obtained, and separate analysis has been made of the compounds under cyclic loading performance; a method has been developed for calculating the bent composite wooden bridge bars reinforced by the dowel plates under cyclic influences.

Beschreibung: Knowledge of the mechanical behaviour of ballast is very important for designing a railway track, especially for high-speed lines. The monotonic drained triaxial tests of scaled and fouled ballast presented in literature were analysed using the Frictional State Theory. The stress–plastic dilatancy relationship shows that four characteristic stages of shearing may be specified. The influence of stress level and water content may be quantified by the use of the Frictional State Theory.

Beschreibung: A systematic approach to measure the differences between Mohr-Coulomb (MC) and Drucker-Prager (DP) shear strength criteria used commonly in soil and rock mechanics is presented. It is shown that the DP criterion generates a shear strength between 0.6 and 3 times the MC strength, for the same friction angle and cohesion parameters. The appropriate conditions for obtaining equal shear strengths are given. Moreover, some new DP failure surfaces are proposed which minimize the differences relative to the MC predictions. The equivalence of the DP and MC criteria under plane strain conditions is also examined.

Beschreibung: The article presents a comparison of the roadway supports currently used in mines in the Soma basin in Turkey with new one proposed by Huta Łabędy and Central Mining Institute (GIG) in terms of resistance parameters and work in conditions of specific loads. The strength analysis of the frame was carried out using the finite element method, using the COSMOS/M program, based on the methodology developed and applied in GIG. The frame models were built corresponding to their geometry and cross-sectional parameters of the sections used. Beam elements (BEAM3D) were used for building models, which were given cross-sectional parameters of the V36 section. This resulted in three frame models that were loaded in three ways (three load variants). The first option included roof load, acting on the roof bar in a uniform manner, at a length of about 3.0 m. In the second variant, the same load was adopted but the resistance of the side wall was omitted. However, in the third variant, the same roof load was assumed in addition to a side load, acting on the sliding arch, at a length of about 3.0 m, a value corresponding to half the load of the roof. As a result of the calculations carried out, the distribution of reduced stresses in the analysed frames and the maximum load values were obtained. The proposed roadway supports retain the functionality of the previously used frames in terms of width, height, cross-sectional area of the support and the number of elements. They are characterised by the same weight and at the same time, they have up to 24% more load capacity because of the replacement of straight sections of curved side sections. This treatment was possible by forming individual elements of the arch with two bending radii. The additional load increase was obtained by using S550W steel.

Beschreibung: This article presents the results of numerical simulations of seepage through the body of the dam and the reservoir bed. The purpose of this study was to analyse the seepage stability during a flood as well as the impact on seepage stability of the diaphragm wall and gravel columns, on which the dam body is founded in selected segments. Simulations were conducted for three different locations, and the following 3D models of the dum were prepared: – a model containing the front and right-bank part of the dam, for which no diaphragm wall, gravel columns and drainage ditch were provided for – a model of a segment of the right-bank dam including a diaphragm wall, drainage ditch and gravel columns under the dam (two variants with differing diaphragm wall lengths) – a model of the water dam segment accounting for gravel columns and a drainage ditch, but without a diaphragm wall. In the case of founding on gravel columns, the base was modelled as an anisotropic medium in terms of seepage properties, macroscopically equivalent to the actual soil medium. The numerical model utilises the finite element method. The geometry of the dam and geological substrate was defined in the GIS tools in the form of a 3D model of the terrain and geology of the substrate.

Beschreibung: One of the most important elements of road construction is its substructure, which constitutes the base on which the next layers of road are placed. Mixture of crushed-stone aggregate is very often used as material for substructure. The most frequently used type of aggregate is magma rocks, due to its good physical-mechanical properties. However, it is not always available, so it is substituted by sandstone or even concrete rubble aggregates. The bearing ratio CBR is a parameter determining the suitability of a certain aggregate for road substructure. It is also one of the most popular quality tests of aggregate as it does not require complex apparatus. This paper analyses the results of physical and geotechnical tests with particular focus on CBR bearing ratio of crushed aggregates and their application as substructure for road construction. There has also been an attempt to find the correlation between CBR bearing ratio and other physical and geometrical properties.

Beschreibung: Dynamically developing terrestrial laser scanning technology (TLS)provides modern surveying tools, that is, scanning total stations and laser scanners. Owing to these instruments, periodic control surveys of concrete dams were performed as a part of geodetic monitoring yield point models characterised by quasicontinuity. Using the results of such measurements as a base, one can carry out a number of geometric analyses as well as acquire information for detailed analytical and calculative considerations.The scanner, similar to total station, by determining distances and angles, identifies spatial coordinates (X, Y, Z) of the surveyed points. Registration of the reflected laser beam’s intensity value (Intensity) emitted by the scanner provides additional information on the surveyed object. Owing to high working speed and the large amount of the collected data, the scanners became an indispensable tool for geodesists.The article assesses the possibility of application of terrestrial laser scanning in surveying changes in the surface of a concrete dam based on the experimental measurements. The condition of the dam’s downstream concrete wall was evaluated. The evaluation included changes in the surface’s roughness, cracks, seepage points, erosion caused by plant overgrowth and the degressive durability parameter of the used material (concrete).The article presents an example of the application of the results of a laser scan in the assessment of the condition of a water dam’s external concrete surfaces. The results of experimental measurements were analysed – the results of a scan of the downstream concrete wall of a dam in Ecker (Germany) using two laser scanners characterised by different technical parameters, that is, laser wavelength (laser’s colour), range, definable point density, method of distance measurement – Leica C10, Z+F Imager 5006h. The measurement was carried out in the same weather conditions from the same sites of the test base.The results of the measurements were analysed using, inter alia, statistical methods by defining template fields and supervised and unsupervised classification methods in reference to the selected fragments of the surface characterised by known concrete surface properties. Various classification algorithms were used. The obtained results make it possible to assess the suitability of the proposed methodology of evaluating the concrete surface’s condition and establish tool selection principles to match the practical application requirements.

Beschreibung: The purpose of the present study was to compare the prediction performances of three statistical methods, namely, information value (IV), weight of evidence (WoE) and frequency ratio (FR), for landslide susceptibility mapping (LSM) at the east of Constantine region. A detailed landslide inventory of the study area with a total of 81 landslide locations was compiled from aerial photographs, satellite images and field surveys. This landslide inventory was randomly split into a testing dataset (70%) for training the models, and the remaining (30%) was used for validation purpose. Nine landslide-related factors such as slope gradient, slope aspect, elevation, distance to streams, lithology, distance to lineaments, precipitation, Normalized Difference Vegetation Index (NDVI) and stream density were used in the landslide susceptibility analyses. The inventory was adopted to analyse the spatial relationship between these landslide factors and landslide occurrences. Based on IV, WoE and FR approaches, three landslide susceptibility zonation maps were categorized, namely, “very high, high, moderate, low, and very low”. The results were compared and validated by computing area under Road the receiver operating characteristic (ROC) curve (AUC). From the statistics, it is noted that prediction scores of the FR, IV and WoE models are relatively similar with 73.32%, 73.95% and 79.07%, respectively. However, the map, obtained using the WoE technique, was experienced to be more suitable for the study area. Based on the results, the produced LSM can serve as a reference for planning and decision-making regarding the general use of the land.

Beschreibung: The problem is a continuation of the research conducted at the University of Warmia and Mazury in Olsztyn, Institute of Building Engineering. It concerns the development of methods for the interpretation of the shear modulus measurements based on the tests conducted on a torsional shear (TS) apparatus. The issue has significant importance in determining the deformation parameters, essential to perform numerical simulations of the interaction between a geotechnical structure and the subsoil. The purpose of this study was to conduct a comparative analysis of the various methods of interpretation of research results based on direct and reverse analysis, as well as automated classification of the first cycle of the relationship between the shear stress and the shear strain components obtained from the TS test. The methodology for verification of the presented interpretative methods consists in carrying out a series of laboratory tests on non-cohesive and cohesive samples of different granulation and state parameters. The course of the research includes the following steps: elaboration of the granulometric composition of several samples of soil, determination of soil index properties and execution of TS tests. Various methods of interpretation of obtained results were taken into account, in addition to conducting a comparative analysis. The study used a non-standard interpretation approach consisting of analysing one-fourth of the hysteresis loop of the first load–unload cycle of the tested samples. The obtained results confirmed the hypothesis that it is possible to estimate the degradation value of the shear modulus based on a part of the TS test results carried out under quasi-monotonic load conditions. The proposed methods of interpreting test results have confirmed their high usefulness, which is devoid of the uncertainty associated with standardised resonant column/TS testing.

Beschreibung: The study of collapsible soils that are generally encountered in arid and semi-arid regions remains a major issue for geotechnical engineers. This experimental study, carried out on soils reconstituted in the laboratory, aims firstly to present a method of reducing the collapse potential to an acceptable level by treating them with different levels of bentonite–cement mixture while maintaining the water content and degree of compactness, thus reducing eventual risks for the structures implanted on these soils. Furthermore, a microscopic study using scanning electron microscopy was carried out to explore the microstructure of the soil in order to have an idea of the phenomena before and after treatment. The results show that treatment with a bentonite–cement mixture improves the geotechnical and mechanical characteristics, modifies the chemical composition of the soil, reduces the collapse potential and the consistency limits. The microstructural study and the X-ray energy dispersive spectroscopy analysis clearly illustrate an association of elementary particles in the soil aggregates, whereby the arrangement of these aggregates leads to the formation of a dense and stable material.

Beschreibung: In the present manuscript, unsteady magnetohydrodynamic (MHD) flow over a moving porous semi-infinite vertical plate with time-dependent suction has been studied in the presence of chemical reaction and radiation parameters. Time-dependent partial differential equations in the dimensionless form are solved numerically through mathematical modelling in COMSOL Multiphysics. The results are obtained for velocity, temperature and concentration profiles at different times. Steady state results are also presented for different values of physical parameters. The parameters involved in the problem are useful to change the characteristics of velocity, heat transfer and concentration profiles. The numerical solution of partial differential equations involved in the problem is obtained without sacrificing the relevant physical phenomena.

Beschreibung: The study summarises the operating characteristics of the powered roof support (shield) used in an automated plough system. Investigated longwall support units were controlled automatically or by section engineers and positioned in the ‘saw tooth’ configuration with respect to the longwall face (automatic mode) or linear to the face. Shield pressure data have been analysed in order to identify the impacts of particular factors on the pressure increase profiles. The analysis was supported by the Statistica software to determine the statistical significance of isolated factors. Equations governing the leg pressure at the given time instant were derived and the roof stability factor ‘g’ was obtained accordingly, recalling the maximal admissible roof displacement method recommended by the Central Mining Institute (Poland). In the current mining practice, its values are used in monitoring of strata behaviour as indicators of shield–strata interactions, particularly in the context of roof control in longwall mining. It is vital that the method used should be adapted to the actual conditions under which the longwall is operated. In the absence of such adaptations, there will be major discrepancies in results. The conclusions section summarises the current research problems addressed at the Department of Underground Mining, in which the support pressure data in longwall operations are used. The first aspect involves the delineation of deformations of a longwall main gate about 100 m ahead of the face. The second issue addressed involves the risk assessment of roof rock caving or rock sliding in the tail gate. Another aspect involves the standardisation of local conditions to support the methodology of interpreting shield–strata interactions in the context of work safety. These methods are being currently verified in situ.

Beschreibung: This article shows the mathematical method to determine the lateral stress on the shaft and toe resistance of pile using the new approach. The method was originally invented by Meyer and Kowalow for the static load test. The approximation curve was used for the estimation of both settlement curve and toe resistance curve of the pile. The load applied at the head of the pile is balanced by the sum of two components: the resistance under the toe of the pile and the skin friction. Therefore, the settlement curve is compilation of two factors: the skin friction curve and the resistance under toe curve. The analysis was based on the verification of the methods using laboratory experiments, that is, static load tests. The results of the research allowed to determine the relationship between parameters of the Meyer–Kowalow curve. On the basis of the relationships, it was possible to determine the skin friction and the toe resistance of the pile. Mathematical analysis of curve parameters allowed to determine the influence of the toe resistance on the settlement.

Beschreibung: Calculation of pullout capacity of anchoring concrete cylindrical block by finite element method is carried out. 3D model of the block assumes its free rotation. Alternative solutions with one and two pulling forces attached at different heights of the block are considered. Dependency of the ultimate pulling force on the points of its application, the block’s embedment depth as well as contact friction are investigated. Results of FE analysis and simple engineering estimations are compared. The maximum pullout resistance results from FE analysis when the rotation of the block is prevented.