ALBERT

Description: There is an obvious need for guidelines and standards with respect to what intensities and durations of noise exposure is considered incompatible with the health and well-being of the people exposed. These guidelines would presumably be useful for the zoning of land areas to avoid overexposure of people to environmental noise and for legislative-judicial adjudication of liabilities for possible damages to individuals and groups from exposure to noise. A number of guidelines for noise exposure were promulgated by various governmental agencies for these purposes. Partly because of the need for an integrated and consistent program of noise control for all elements of the government, the United States Environmental Protection Agency (EPA) was established. In addition to previously issuing some specific documents regarding safe noise exposure limits, the EPA joined several Federal operating and regulatory agencies in issuing guidelines for considering noise in land use planning and control. Government guideline documents, as well as some issued by non-government agencies, are examined. Also, newly proposed guidelines for noise in residential areas, and the scientific basis for these guidelines, are presented.

Description: The administration of morphine to hypophysectomized rats potentiated the steroidogenic response of the adrenal cortex to exogenous adrenocorticotrophic hormone (ACTH) in a dose-dependent fashion. Conversely, the opiate antagonist naloxone inhibited the adrenal response to ACTH. Naloxone pretreatment also antagonized the potentiating effect of morphine on ACTH-induced steroidogenesis in a dose-dependent manner. Neither morphine nor naloxone, administered to hypophysectomized rats, had any direct effect on adrenal steroidogenesis. These adrenal actions were stereospecific since neither the (+)-stereoisomer of morphine, nor that or naloxone, had any effect on the adrenal response to ACTH. The administration of human beta-endorphin to hypophysectomized rats had no effect on the adrenal corticosterone concentration nor did it alter the response of the adrenal gland to ACTH. These results indicate that morphine can potentiate the action of ACTH on the adrenal by a direct, stereospecific, dose-dependent mechanism that is prevented by naloxone pretreatment and which may involve competition for ACTH receptors on the corticosterone-secreting cells of the adrenal cortex.

Description: In phenotype the mycoplasmas are very different from ordinary bacteria. However, genotypically (i.e., phylogenetically) they are not. On the basis of ribosomal RNA homologies the mycoplasmas belong with the clostridia, and indeed have specific clostridial relatives. Mycoplasmas are, however, unlike almost all other bacteria in the evolutionary characteristics of their ribosomal RNAs. These RNAs contain relatively few of the highly conserved oligonucleotide sequences characteristic of normal eubacterial ribosomal RNAs. This is interpreted to be a reflection of an elevated mutation rate in mycoplasma lines of descent. A general consequence of this would be that the variation associated with a mycoplasma population is augmented both in number and kind, which in turn would lead to an unusual evolutionary course, one unique in all respects. Mycoplasmas, then, are actually tachytelic bacteria. The unusual evolutionary characteristics of their ribosomal RNAs are the imprints of their rapid evolution.

Description: The effect of root-zone temperature on young tomato plants (Lycopersicon esculentum Mill. cv. Heinz 1350) was evaluated in controlled environments using a recirculating solution culture system. Growth rates were measured at root-zone temperatures of 15 degrees, 20 degrees, 25 degrees, and 30 degrees C in a near optimum foliar environment. Optimum growth occurred at 25 degrees to 30 degrees during the first 4 weeks of growth and 20 degrees to 25 degrees during the 5th and 6th weeks. Growth was severely restricted at 15 degrees. Four concentrations of gibberellic acid (GA3) and kinetin were added to the nutrient solution in a separate trial; root-zone temperature was maintained at 15 degrees and 25 degrees. Addition of 15 micromoles GA3 to solutions increased specific leaf area, total leaf area, and dry weight production of plants in both temperature treatments. GA3-induced growth stimulation was greater at 15 degrees than at 25 degrees. GA3 may promote growth by increasing leaf area, enhancing photosynthesis per unit leaf area, or both. Kinetic was not useful in promoting growth at either temperature.

Description: Laboratory experiments to quantify the global production of NOx (NO + NO2) in the troposphere due to atmospheric lightning and biogenic activity in soil are presented. These laboratory experiments, as well as other studies, suggest that the global production of NOx by lightning probably ranges between 2 and 20 MT(N)y-1 of NO and is strongly dependent on the total energy deposited by lightning, a quantity not well-known. In our laboratory experiments, nitrifying micro-organisms is soil were found to be a significant source of both NO and nitrous oxide (N2O). The measured production ratio of NO to N2O averaged 2-3 for oxygen partial pressures of 0.5-10%. Extrapolating these laboratory measurements to the global scale, which is somewhat risky, suggests that nitrifying micro-organisms in soil may account for as much as 10 MT(N) y-1 of NO. Additional experiments with denitrifying micro-organisms gave an NO to N2O production ratio ranging from 2 to 4 for an oxygen partial pressure of 0.5% and a ratio of less than unity for oxygen partial pressures ranging from 1 to 20%. The production of NO and N2O, normalized with respect to micro-organism number indicates that the production of both NO and N2O by denitrifying micro-organisms is at least an order of magnitude less than production by nitrifying micro-organisms for the micro-organisms studied.

Description: A self-consistent method of determining initial conditions for the model presented by Berner, Lasaga, and Garrels (1983) (henceforth, the BLAG model) is derived, based on the assumption that the CO2 geochemical cycle was in steady state at t = -100 my (million years). This initialization procedure leads to a dissolved magnesium concentration higher than that calculated by Berner, Lasaga, and Garrels and to a low ratio of dissolved calcium to bicarbonate prior to 60 my ago. The latter prediction conflicts with the geologic record of evaporite deposits, which requires that this ratio remain greater than 0.5. The contradiction is probably caused by oversimplifications in the BLAG model, such as the neglect of the cycles of organic carbon and sulfur.

Description: The test capabilities of the Stability Wind Tunnel of the Virginia Polytechnic Institute and State University are described, and calibrations for curved and rolling flow techniques are given. Oscillatory snaking tests to determine pure yawing derivatives are considered. Representative aerodynamic data obtained for a current fighter configuration using the curved and rolling flow techniques are presented. The application of dynamic derivatives obtained in such tests to the analysis of airplane motions in general, and to high angle of attack flight conditions in particular, is discussed.

Description: The discovery of concentrations of meteorites in Antarctica by Japanese field parties in 1969, and subsequently by joint U.S.-Japanese and U.S. field parties since 1976 has provided a significant new resource for understanding the origin and evolution of the solar system. The number of meteorites as well as the variety of meteorites has increased dramatically, and substantial amounts of data derived from their study has begun to appear in the scientific literature. The U.S. program of investigation has drawn on curatorial experience derived from the lunar program to: (1) develop specific collection and preliminary examination protocols; (2) provide documented samples for scientific investigations in response to specific requests; and (3) coordinate research by scientific consortia. The productivity of scientific research is significantly enhanced by these management approaches. Some of the results of the curatorial program for Antarctic meteorites carried out over the past three years are described.

Description: Motion sickness symptoms, stimuli, and drug therapy are discussed. Autogenic feedback training (AFT) methods of preventing motion sickness are explained. Research with AFT indicates that participants who had AFT could withstand longer periods of Coriolis acceleration, participants with high or low susceptibility to motion sickness could control their symptoms with AFT, AFT for Coriolis acceleration is transferable to other motion sickness stimuli, and most people can learn AFT, though with varying rates of learning.

Description: The topics are presented in view graph form and include the following: an adaptive model following control; adaptive control of a distributed parameter system (DPS) with a finite-dimensional controller; a direct adaptive controller; a closed-loop adaptively controlled DPS; Lyapunov stability; the asymptotic stability of the closed loop; and model control of a simply supported beam.

Description: The first general research objective was to address control design challenges of the Spacecraft Control Laboratory Experiment (SCOLE) via the two stage approach: (1) slew the whole as if it were a rigid body about one Space Shuttle body axis each time using the onboard Reaction Control System (RCS) thrusters; and (2) damp out excited vibrations. The second objective was to examine the feasibility of applying the approach to shuttle-attached flexible space structures. The following was accomplished: (1) a standard bang-bang control technique was adapted; (2) a slew rate limit was imposed in the design; and (3) slew acceleration deviation was defined as the index of slew performance degradation.

Description: Information on a modal model for the Spacecraft Control Laboratory (SCOLE) is given in viewgraph form. A partial differential equation model covering roll bending, pitch bending, torsion, shear forces, and bending moments is given.

Description: The distributed element dynamic analysis package DISTEL is used to analyze the NASA/Institute of Electrical and Electronics Engineers' Spacecraft Control Laboratory Experiment (SCOLE). In this configuration, the Space Shuttle motion is coupled to the motion of a large dish antenna through a Shuttle-deployed flexible mast of 40 m long. Due to the high asymmetry of the system, the motions about the different axes (roll, pitch, yaw) are severely coupled. A general purpose software like DISTEL is especially suited for this kind of analysis. Modal frequencies of the complete spacecraft and impulse response (modal gains) to excitations at different locations are obtained. Mode-shape plots of the deformations of the entire system are given. Finally, results obtained at NASA and at Purdue University are compared to those found by the European space technology center, ESTEC.

Description: A mathematical formulation for the control of the Spacecraft Control Laboratory Experiment (SCOLE) configuration is given. Two equivalent approaches, one using a functional equation and the other an abstract wave equation, are illustrated. Such a formulation can help in digital computer simulation to evaluate control laws, providing insight, and generating control laws.

Description: The objectives of this study are listed as follows: (1) to develop Lagrange's equations of motion for the shuttle antenna configuration in orbit; (2) to modify equations using the Lagrange multiplier method to develop equations of motion for the laboratory experiment; and (3) to discuss methods for simulation and control. The equations are presented in graph form.

Description: Discussed here is a NASA program which was initiated to make direct comparisons of control laws for a mathematical problem. An experimental test item is being assembled under the cognizance of the Spacecraft Control Branch at Langley Research Center. The physical apparatus will consist of a softly supported dynamic model of an antenna attached to the Space Shuttle by a flexible beam. The control objective will include the task of directing the line of sight of the Shuttle/antenna configuration toward a fixed target, under conditions of noisy data, limited control authority, and random disturbances.

Description: The scope of this study covered steady-state, continuous-time vibration control under disturbances applied to the Space Shuttle and continuous-time models of actuators, sensors, and disturbances. Focus was on a clear illustration of the methodology, therefore sensor/actuator dynamics were initially ignored, and a finite element model of the NASA Spacecraft Control Laboratory Experiment (SCOLE) was conducted, including products of inertia and offset of reflector CM from the mast tip.

Description: The motivation was to develop a control design and analysis methodology directly applicable to design concepts of flexible spacecraft of interest the the U.S. Navy and to provide a testbed for the evaluation of large space structure control techniques developed at the Naval Research Laboratory. The topics covered include the following: (1) a list of key concepts; (2) evaluation of the Spacecraft Control Laboratory Experiment (SCOLE) model with DISCOS; (3) baseline results, line of sight error vs. time; (4) general formulation of optimization; (5) geometric interpretation, projected eigenaxis; (6) closed loop control law; and (7) future directions.

Description: Nonlinear and linear equations of motions were derived. The preliminary investigation consisted of model beam as truss structure, effects of truss structure on control design, and effects of reflector offset on control design. It was concluded that the offset of the reflector c.g. from the beam reflector attach point is dynamically significant. Also, truss effects may also significantly effect the performance of the controller if ignored. If the truss is included in the modeling of the NASA/SCOLE configuration, a practically implementable scheme is available to reduce the model order.

Description: The Spacecraft Control Laboratory Experiment (SCOLE) will allow direct experimental comparison of competing control schemes for large flexible spacecraft structures. The experiment was designed to emulate the essential characteristics of a mathematical model design challenge which represents a Space Shuttle with a flexible mast and antenna attached. This experiment represents the third in a series of three flexible structure control experiments used by the Flight Dynamics and Control Division at LaRC. The key problem addressed by the facility is that flexible motion of the mast and antenna must be considered in the slewing and pointing control problems.

Description: The following topics are covered in view graph form: (1) pulse control strategy; (2) stability analysis and digital simulations; (3) digital/analog and analog/digital conversions, and analog simulation; and (4) experimental studies.

Description: Researchers simplified the analytical expression of the line of sight (LOS) error, discovered and proved the independence of Euler angle Psi, calculated attitude angles corresponding to 0 degrees and 20 degrees LOS errors, determined choices of initial alignment, tailored the slew maneuvers for LOS pointing, simulated numerically the LOS pointing slew of the Spacecraft Control Laboratory Experiment (SCOLE), and evaluated the pointing performance.

Description: Projections of technological advances to the year 2000 have suggested a number of possible conceptual types of air vehicles. For convenience, these have been grouped according to speed, increasing from below Mach 1 (including hovering flight) through various Mach ranges to orbital flight. The potential performance capabilities that could be realized for each of these types of aircraft provide exciting prospects for the years beyond 2000. It is clear that the greater design flexibilities provided by the projected technology advances will permit significant improvements in performance, economy, and safety and allow the design and development of aircraft systems that current technology will not support. In the following sections, each vehicle type is discussed, noting design features and significant advances. Where related aircraft exist, the significant economic and performance factors are compared. In addition, for each concept, the technology developments considered essential for the advanced concept are identified. The types of aircraft described are examples of what advances in the technology projected for the year 2000 could provide. They are by no means all that would be possible. The panel's views on the current state of knowledge of systems intergration as a discipline and the need for advancement in this area presented in the concluding section of this report.

Description: Over the last 50 years, aeronautical structures have evolved from the wood, fabric, and wire of low-speed biplanes to supersonic aircraft fabricated with advanced metallic and nonmetallic materials. The advances made in structures technology have had significant impact on aircraft design and performance. An example is the large weight reductions being realized from the utilization of composite materials for secondary and primary structures. However, structural advances have been evolutionary, not revolutionary. Through the year 2000, there are opportunities to obtain significant new advancements in structural technology. These advances could result in considerable performance and capability payoffs such as increased payload, range, speed, maneuverability, fuel efficiency, and safety through reductions in weight, increases in strength, and the ability to make structures pliable. Also, with new manufacturing processes it is possible that reductions in production costs will be realized. Some of the structural technology areas where future major advances could be made are adaptive structures, thermal structures, damage tolerant structures, propulsion system structures, and new structural concepts.

Description: Progress in aerodynamics over the past 50 years has been evidenced by the development of increasingly sophisticated and efficient flight vehicles throughout the flight spectrum. Advances have generally arisen in an evolutionary manner from experience gained in wind tunnel testing, flight testing, and improvements in analytical and computational capabilities. As a result of this evolutionary development, both military and commercial vehicles operate at a relatively high efficiency level. This observation plus the fact that airplanes have not changed appreciably in outward appearance over recent years has led some skeptics to conclude incorrectly that aerodynamics is a mature technology, with little to be gained from further developments in the field. It is of interest to note that progress in aerodynamics has occurred without a thorough understanding of the fundamental physics of flow, turbulence, vortex dynamics, and separated flow, for example. The present understanding of transition, turbulence, and boundary layer separation is actually very limited. However, these fundamental flow phenomena provide the key to reducing the viscous drag of aircraft. Drag reduction provides the greatest potential for increased flight efficiency from the standpoint of both saving energy and maximizing performance. Recent advances have led to innovative concepts for reducing turbulent friction drag by modifying the turbulent structure within the boundary layer. Further advances in this basic area should lead to methods for reducing skin friction drag significantly. The current challenges for military aircraft open entirely new fields of investigation for the aerodynamicist. The ability through very high speed information processing technology to totally integrate the flight and propulsion controls can permit an aircraft to fly with "complete abandon," avoiding departure, buffet, and other undesirable characteristics. To utilize these new control concepts, complex aerodynamic phenomena will have to be understood, predicted, and controlled. Current requirements for military aircraft include configuration optimization through a widened envelope from subsonic to supersonic and from low to high angles of attack. This task is further complicated by requirements for control of observables. These challenging new designs do not have the luxury of a large experimental data base from which to optimize for various parameter combinations. Consequently, there exists a strong need for better techniques, both experimental and computational, to permit design optimization in a complete sense.

Description: Propulsion, while conventionally included on the list of important aeronautical disciplines along with aerodynamics, structures, etc., is in itself a systems endeavor, analogous to the engineering of the entire vehicle; indeed propulsion encompasses important aspects of all the other disciplines. In recognition of this fact, the panel focused its discussion on those aspects of the key disciplines that are especially or uniquely important to propulsion. From the initial development of the airplane, the propulsion system has been recognized as one of the pacing technologies. It is perhaps because of the technological disparity between the reciprocating engine and the primitive airframe that the two remained relatively and separate, were developed somewhat independently, usually by different organizations. In recent years, the maturing of the gas turbine power plant and the advance in high-speed airframes have rendered this separation somewhat artificial. The power plant and the airframe now share common structural and aerodynamic elements; as the flight Mach number rises, the degree of interaction increases. By the year 2000, this interdependence will have increased in many respects to a point where independent design may not be practical or possible. During the period since the initiation of the aircraft gas turbine, the solid propellant rocket and the liquid propellant rocket, a vast array of other novel engines have been studied, covering the full spectrum of flight conditions from low subsonic to hypersonic and transatmospheric flight. In each instance, performance limits have been investigated under the assumption that current technology or reasonably foreseeable technology would be available for their development. Among the extensive list of advanced, high-performance concepts and cycles examined are the hypersonic ramjet, the variable cycle, runway-to-orbit airbreathing engine, the ram rocket (airbreathing and rich solid propellant rocket), and the air turborocket. At various times, these systems have come relatively close to meriting development and application. In many instances, limitations of materials and technologies curtailed development. As important and with almost equal frequency, the lack of commercial or military utility of the concept precluded the necessary funding. It is instructive to note that two former items on this list, the turbofan (bypass engine) and the high-speed turboprop, are respectively a mainstay engine and a promising development. In the case of the turbofan, its full potential could not be realized until turbine cooling technology had been developed and new materials developed to permit the construction of transonic fans. In the case of the highspeed turbopropeller engine, not only were the material and turbine technologies needed, but, in addition, the rise in fuel costs provided the impetus to take advantage of its favorable fuel consumption characteristic. As the basic technologies progress and as new missions become attractive, the engines in the foregoing list become candidates for new feasibility studies and further technology development. At the present time, the ram rocket is the prime contender to augment the range of small missiles. Of interest also is the hypersonic ram jet and its logical extension, the runway-to-orbit airbreathing engine. Much of this report deals with the development of current or near-future power plant concepts. First, the motivating factors for aeronautical propulsion research are reviewed as a reminder of the importance of continued effort in a field that has often been characterized as mature. Next, technical areas are discussed in which the panel feels additional research effort is warranted and would lead to the realization of the technological potentials between now and the year 2000. Under these guidelines, new cycles (e.g., isothermal energy exchange) were not considered by the panel. Finally, although facility requirements were not a prime consideration in the current projections, the panel believes that the increasing complexity of propulsion systems; the need for more refined interaction between propulsion system, airframe, and controls; and increasing operation in adverse weather will require test capabilities beyond those now available (see appendix). Enhanced test capability is needed in the areas of propulsion airframe integration and in largescale icing research with proper concurrent treatment of altitude, temperature, and speed.

Description: Guidance, navigation, and control (GNC) systems have historically been vital to improving operational capability of aircraft. The development of autopilots and electronic navigation systems has greatly aided the crew in flying precise routes in all weather conditions while at the same time reducing pilot workload. Advances in high-integrity onboard computing and electronics technology have resulted in a significant increase in the capability of these subsystems to perform more reliably, efficiently, and safely. Onboard computing and control system capability has provided new design approaches for the aircraft designer. By using automatic control systems to stabilize the aircraft, the designer can relax certain conventional aerodynamic stability requirements and achieve aircraft performance benefits. Thus, modern fighter aircraft are designed with low levels, or in fact, negative levels of longitudinal static stability to boost maneuvering capability and cruise performance, relying on the use of full-time, full-authority automatic stability augmentation systems to stabilize the aircraft. During the next 20 years, GNC systems will become a driving force in aircraft design. Instead of making separately designed major aircraft systems work together, the designer will exploit the interaction and integration of aerodynamic, structural, and propulsion system controls to provide a better aircraft. The benefits of such integrated designs have been demonstrated already. Integrated digital control of the engine inlet and autopilot systems on a NASA YF-12 research aircraft resulted in a range increase of 7 percent. A civil transport derivative using extensions on each wing and an active control system to minimize the requirement for structural modifications achieved significant cruise performance improvements. These are first-generation applications of advanced GNC systems. More significant benefits are achievable by the year 2000. Complete integration of aerodynamic, propulsion and structural controls, and mission avionics will provide dramatically better aircraft performance, new capability (low observability, supermaneuverability) and/or improved mission effectiveness. This requires a concurrent, multidisciplinary design approach early in the design stage. The role of advanced GNC systems in future aircraft is not an option.

Description: Materials and manufacturing technology are critical to advanced aircraft and permeate all disciplines. Current aircraft systems employ a variety of materials, each selected to provide the best vehicle design in terms of performance, safety, reliability, manufacturability, and life cycle cost. However, a mistake in materials selection could bankrupt an airframe or engine manufacturer. Thus, the introduction of new materials is a slow process. Generally, new materials are used initially in noncritical components until their performance in service can be confirmed. Then, as confidence grows, they are used in more and more critical applications. Finally, if appropriate, new materials are used in critical, static elements and then in dynamic components. Thus, because the nominal time for development of a conventional monolithic material ranges from 5 to 10 years there is a 10- to 15- year lag between laboratory effort and introduction into service. Therefore, to assure the availability of materials suitable for production aircraft and engines in the year 2000, the concepts already must have been identified and must be progressing along evolutionary paths toward application. Trends, actual and projected, in the use of materials for commercial engines are shown in Figure 4-1. Related military applications are projected to follow similar paths. The new actor will be composites. The panel examined a wide range of materials important to all aspects of aircraft development, airframe structures, propulsion systems and for other important aircraft subsystems. These are addressed in the body of the report in terms of the current state of the art, opportunities for improvement, and barriers to achievement of projected benefits. This is followed by projections of the progress of technology that could be realized by the year 2000 with the application of appropriate resources.

Description: Simple physical arguments are used to estimate the time scale for fragmentation of a collapsing, rotating, isothermal, interstellar cloud. This time scale is compared with a similarly estimated time scale for the collapse upon itself of a transitory ring structure. It is shown to be plausible for a cloud with a given ratio of rotational to gravitational energy (beta) that as the ratio of thermal to gravitational energy (alpha) is varied, there is an intermediate range of alpha where a ring forms and collapses on itself, prior to fragmentation. For higher or lower alpha however, the cloud fragments prior to ring self-collapse. The analysis is compared with the results of numerical multidimensional, gravitational, hydrodynamical collapse and shown to be in good agreement with them.

Description: The structural analysis of the Space Shuttle orbiter was planned with two concepts in mind: use derivatives or subsets of the same basic finite element model whenever feasible, and substantiate the model's predictive capability by performing ground tests. The analysis cycle (model modal loads stress (MMLS)) starts with the finite element model conception and ends with the detailed stress analysis and margins of safety. The structural analysis of the orbiter encompasses a variety of static and dynamic problems. The salient features of these problems and their solutions are examined.

Description: The governing equations for the analysis of open branch-chain mechanical systems are developed in a form suitable for implementation in a general purpose finite element computer program. Lagrange's form of d'Alembert's principle is used to derive the system mass matrix and force vector. The generalized coordinates are selected as the unconstrained relative degrees of freedom giving the position and orientation of each slave link with respect to their master link. Each slave link may have from zero to six degrees of freedom relative to the reference frames of its master link. A strategy for automatic generation of the system mass matrix and force vector is described.

Description: In many structures the final stress states are dependent on the sequence of construction or the stress states at various stages of construction are of interest. Such problems can be analyzed using finite element programs that have the capability of adding (birthing) elements to simulate the progress of construction. However, the usual procedure of assembling elements may lead to numerical instabilities or stress states that are unrealistic. Both problems are demonstrated in the analysis of a structure using the program ADINA. A technique which combines application of a preload with element birthing to overcome these problems is described and illustrated.

Description: A technique utilizing finite element analysis, liquid impact kinematics, and momentum theory is described and compared to single-drop impact test data performed on various configurations of coated ceramic material. The method correlates well with test data and is useful in predicting the single-drop impact damage velocity threshold for low-density, coated ceramic materials.

Description: An algorithm is outlined for simulating the contact surface erosion for impact problems. The algorithm dynamically relocates the contact surface as projectile and target materials exceed their failure criterion. Example computations of axisymmetric and oblique impacts are compared with experimental data.

Description: Transport fuselage section drop tests provided useful information about the crash behavior of metal aircraft in preparation for a full-scale Boeing 720 controlled impact demonstration (CID). The fuselage sections have also provided an operational test environment for the data acquisition system designed for the CID test, and data for analysis and correlation with the DYCAST nonlinear finite-element program. The correlation of the DYCAST section model predictions was quite good for the total fuselage crushing deflection (22 to 24 inches predicted versus 24 to 26 inches measured), floor deformation, and accelerations for the floor and fuselage. The DYCAST seat and occupant model was adequate to approximate dynamic loading to the floor, but a more sophisticated model would be required for good correlation with dummy accelerations. Although a full-section model using only finite elements for the subfloor was desirable, constraints of time and computer resources limited the finite-element subfloor model to a two-frame model. Results from the two-frame model indicate that DYCAST can provide excellent correlation with experimental crash behavior of fuselage structure with a minimum of empirical force-deflection data representing structure in the analytical model.

Description: The dynamic behavior of aircraft fuselage structures subject to various impact conditions was investigated. An analytical model was developed based on a self-consistent finite element (CFE) formulation utilizing shell, curved beam, and stringer type elements. Equations of motion were formulated and linearized (i.e., for small displacements), although material nonlinearity was retained to treat local plastic deformation. The equations were solved using the implicit Newmark-Beta method with a frontal solver routine. Stiffened aluminum fuselage models were also tested in free flight using the UTIAS pendulum crash test facility. Data were obtained on dynamic strains, g-loads, and transient deformations (using high speed photography in the latter case) during the impact process. Correlations between tests and predicted results are presented, together with computer graphics, based on the CFE model. These results include level and oblique angle impacts as well as the free-flight crash test. Comparisons with a hybrid, lumped mass finite element computer model demonstrate that the CFE formulation provides the test overall agreement with impact test data for comparable computing costs.

Description: A study of the dynamic characteristics of a coupled translational-rotational system is given. The formulation of the problem considers the soil-structure interaction effects by utilizing the impedance functions at the foundation of a structure. Due to the fact that the coefficient matrix in the characteristic equation is frequency dependent in nature, iterations have to be performed to find the nature frequencies of the system. Examples and discussions are presented. Comparisons of the analytical results from various approaches are also given.

Description: Two analytical techniques applicable to large deflection dynamic response calculations for pressure loaded composite sandwich panels are demonstrated. One technique utilizes finite element modeling with a single equivalent layer representing the face sheets and core. The other technique utilizes the modal analysis computer code DEPROP which was recently modified to include transverse shear deformation in a core layer. The example problem consists of a simply supported rectangular sandwich panel. Included are comparisons of linear and nonlinear static response calculations, in addition to dynamic response calculations.

Description: The design of thin shell structures with respect to elastoplastic buckling requires an extended analysis of the influence of initial imperfections. For conservative design, the most critical defect should be assumed with the maximum allowable magnitude. This defect is closely related to the initial postbuckling behavior. An algorithm is given for the quasi-static analysis of the postbuckling behavior of structures that exhibit multiple buckling points. the algorithm based upon an energy criterion allows the computation of the critical perturbation which will be employed for the definition of the critical defect. For computational efficiency, the algorithm uses the reduced basis technique with automatic update of the modal basis. The method is applied to the axisymmetric buckling of cylindrical shells under axial compression, and conclusions are given for future research.

Description: A general approach is required for describing matter of behavior when the failure is likely to involve growth and coalescence of a large number of fractures. Failures of this kind appear frequently in rapid dynamic processes, particularly in the formation of spall fragments. An approach to formulating constitutive relations that accounts for the opening, shear and growth of an ensemble of cracks is discussed. The approach accounts for plastic flow accompanying fragmentation. The resulting constitutive relations were incorporated into a Lagrangian computer program. A theoretical approach to coalescence is described. The simplest formulation uses a linear Liouville equation, with crack growth limited by the mean free path of cracks, assumed constant. This approach allows for an anisotropic distribution of cracks. An alternative approach in which the decrease of the mean free path with increasing crack size is accounted for, but the crack distribution is assumed isotropic is described. A reduction of the governing Liouville equation to an ordinary differential equation of third order is possible, and the result can be used to determine how mean free path decreases with increasing crack size.

Description: The design of a composite panel requires some way of finding the minimum thickness laminate which will withstand the load requirements without failure. The mathematical complexity of this problem dictates the use of nonlinear optimization techniques. Specialized laminate optimization programs were developed which are compact and efficient enough to run on microcomputers. Only stresses at a point and inplane loads and deflections are considered. The programs are simple to use and require no knowledge of optimization. Techniques are developed which find minimum thickness laminates with either ply ratios or ply angles as design variables. A method is presented for finding the optimum orientation for the axis of symmetry of an orthotropic laminate. The orthotropic laminate program uses an approximate failure theory, which speed up computations dramatically.

Description: The evaluation of the total probability of a plastic collapse failure P sub f for a highly redundant structure of random interdependent plastic moments acted on by random interdepedent loads is a difficult and computationally very costly process. The evaluation of reasonable bounds to this probability requires the use of second moment algebra which involves man statistical parameters. A computer program which selects the best strategy for minimizing the interval between upper and lower bounds of P sub f is now in its final stage of development. The relative importance of various uncertainties involved in the computational process on the resulting bounds of P sub f, sensitivity is analyzed. Response sensitivities for both mode and system reliability of an ideal plastic portal frame are shown.

Description: A finite element modeling technique which utilizes a triangular element called TSHEL with 45 degrees of freedom and seven point integration was tested for analysis of thin plate and shell structures. The element formulation is based on the degenerate solid shell concept and the mixed formulation with assumed independent inplane and transverse shear strains. The effectiveness of the present modeling technique which features combined use of elements with kinematic modes and those without kinematic modes to eliminate both locking and spurious kinematic modes at the global structural levels are shown.

Description: The stress derivative technique for control of keystoning deformation in under-integrated finte elements is based on expansion of the stress in a Taylor series about the element center and retention of additional terms beyond the constant stress term. It has the advantage over other control techniques that keystoning resistance is provided by actual rather than artificial material properties. Application of this technique to the quadrilateral ring elements used for modelling solids of revolution subjected to axisymmetric loads is described. In a cylindrical coordinate system additional terms appear in the formulation which must be dealt with in arriving at a workable keystoning control scheme.

Description: A relational database management system is presented that is tailored for engineering applications. A wide variety of engineering data types are supported and the data definition language (DDL) and data manipulation language (DML) are extended to handle matrices. The system can be used either in the standalone mode or through a FORTRAN or PASCAL application program. The query language is of the relational calculus type and allows the user to store, retrieve, update and delete tuples from relations. The relational operations including union, intersect and differ facilitate creation of temporary relations that can be used for manipulating information in a powerful manner. Sample applications are shown to illustrate the creation of data through a FORTRAN program and data manipulation using the TEQUEL DML.

Description: An existing program is currently being adapted to perform finite element analysis by distributing substructures over a network of four Apple IIe microcomputers connected to a shared disk. In this network, one microcomputer controls the entire process while the others perform the analysis on each substructure in parallel. This substructure analysis is used in an iterative, fully stressed, structural resizing procedure. This procedure allows experimentatation with resizing in which all analyses are not completed during a single iteration. This research gives some insight on how to configure multidiscriplinary analysis and optimization procedures for decomposable engineering systems using either high performance engineering workstations or a parallel processor supercomputer. In addition, the operational experience gained facilitates the implementation of analysis programs on these new computers when they become available in an engineering environment.

Description: Described are the experiences gained from solving for the dynamic response of two simple structures on an experimental Multiple Instruction Multiple Data (MIMD) computer called the finite element machine. Introduced are MIMD computing concepts, describing how the concurrent algorithmic techniques implemented and giving results for the two example problems. The results show computational speedups of up to 7.83 using eight of the finite element machine processors and indicate that significant computational speedups are possible for large order structural computations.

Description: The FLEX/32 Multicomputer is a generic environment for cooperating multiple processors. The FLEX/32 supports a number of different processors, making it heterogeneous in terms of the instruction sets it supports, and homogeneous in its ability to provide consistent storage and input/output facilities to its differing processors. These facilities are accessed through standard 32-bit VMEbus connections. The FLEX/32 supports the full UNIX System V Operating System and languages associated with it, plus the extended ConCurrent C and Concurrent FORTRAN 77 languages that allow programming of concurrent software at a high level. Direct programming support at all levels is provided by the environment hardware for concurrent software execution and optimization, including hardware support for shared resource access arbitration, conditional critical region arbitration, and interprocessor messages.

Description: Research aimed at faster, more cost effective parallel machines and algorithms for improving designer productivity with finite element computations is discussed. A set of 8 boards, containing 4 nearest neighbor connected arrays of commercially available floating point chips and substantial memory, are inserted into a commercially available machine. One-tenth Mflop (64 bit operation) processors provide an 89% efficiency when solving the equations arising in a finite element problem for a single variable regular grid of size 40 by 40 by 40. This is approximately 15 to 20 times faster than a much more expensive machine such as a VAX 11/780 used in double precision. The efficiency falls off as faster or more processors are envisaged because communication times become dominant. A novel successive overrelaxation algorithm which uses cyclic reduction in order to permit data transfer and computation to overlap in time is proposed.

Description: Most of the research on reactions of people to community noise is divided into studies of annoyance as measured by attitude surveys and annoyance as measured by complaint behavior, including legal actions. This research has provided means of testing the concept promulgated over 20 years ago that the average amount of noise energy from significant sources that intrudes daily into houses and living areas can be used to predict the impact of the noise on people in a community. However, research data on annoyance and complaint behavior collected over the past 10 to 20 years have shown that there are significant limitations and variables that must be considered in the fair application of the noise energy concept in its simplest form.

Description: The establishment of a baseline of normal hearing is investigated through the examination of pure tone hearing level surveys and variables such as age, sociocusis, sex, race, and otological disorders. Mathematical formulae used to predict hearing levels in industrial and nonindustrial surveys is included.

Description: Voyager 1 images show 14 volcanic centers wholly or partly within the Kane Patera quadrangle of Io, which are divided into four major classes: (1) shield with parallel flows; (2) shield with early radial fan shapd flows; (3) shield with radial fan shaped flows, surfaces of flows textured with longitudinal ridges; and (4) depression surrounded by plateau-forming scarp-bounded, untextured deposits. The interpretation attempted here hinges largely on the ability to distinguish lava flows from pyroclastic flows by remote sensing.

Description: Opinions conflict over the role of surface gravity in shaping impact craters on Mercury. One view holds that the effects of g are evident in measurable aspects of crater form; other investigators find little or no evidence for g's geomorphic importance. Ambiguity in the role of g and other variables in cratering on Mercury stems largely from uncertainty in identifying major geomorphic contrasts and the crater sizes at which they occur. One of these, depth/diameter (d/D), undergoes a major change at the transition from simple (bowl shaped) to complex (peaks and terraces) crater interiors. Four least-squares d/D fits for fresh craters on Mercury were attemped. The results are inconsistent. The d/D data that should resolve previous shortcomings is presented. The revised d/D distributions for simple and complex craters, which intersect at a diameter of about 5 km, support the initial thesis that g substantially influences the form of Mercury's craters.

Description: Ab initio self-consistent-field plus configuration-interaction calculations are reported for the X(sup 1)Sigma(sup +), A(sup 1)Sigma(sup +), and B(sup 1)Pi states of LiH using a 22(sugma)12(pi)7(delta) function Slater basis set. The resulting dissociation energies, with the experimental values in parentheses, are D(sub e)(X(sup 1)Sigma(sup +)) = 19 972 (20288)/ cm, and D(sub e)(A(sup 1)Sigma(sup +)) = 9042 (8682)/ cm, and D(sup e)(B(sup 1)Pi) = 284 (288) /cm. This is the first ab initio treatment to quantitatively account for the binding in the B(sup 1)Pi state. Calculated dipole moments and electronic transition moments for the X(sup 1)Sigma(sup+)-A(sup 1)Sigma(sup +), X(sup 1)Sigma(sup +)-B((sup 1)Pi, and A(sup 1)Sigma(sup +)- B(sup 1)PI band systems are in excellent agreement with existing theoretical and experimental data. Radiative transition probabilities and lifetimes, including both the bound-bound and bound-free contributions, are computed for all vibrational levels of the A(sup 1)Sigma(sup+) and B(sup 1)Pi states. Comparison with previous results using experimentally based potentials provides insight into the sensitivity of the radiative lifetimes to the detailed nature of the uppermost region of the potentials. Our calculated lifetimes for the lower vibrational levels of the A(sup 1)Sigma(sup +) state are within the experimental uncertainty. Our calculated lifetimes for the three vibrational levels of the B(sup 1)Pi state are in excellent agreement with those of Zemke and Stwalley (values in parentheses), increasing with (upsilon)' from 11.3 (11.3) nsec at (upsilon)' = 0, to 17.0 (17.0) nsec at (upsilon)' = 1, and then to 23.5 (24.0) nsec at (upsilon)' = 2.

Description: The interaction of heat, mass, and momentum transport in the floating zone method for growing single crystals from the melt is examined. Methods for detailed numerical simulation of the transport phenomena in a floating zone are developed. Results of the calculations are combined with experiments to determine the effects of solidification induced, surface tension driven, and buoyancy driven convection in establishing dopant redistribution in the melt and the roles of heat transfer in crystal and melt and melt/solid interface shape in determining crystal quality. State of the art finite element techniques were developed for calculating the influence of natural convection in the melt on the shape of a melt/crystal interface and dopant segregation in the crystal. These techniques are demonstrated for solidification by the Bridgman technique. Numerical techniques are developed that calculate the shapes of both the melt/solid and melt/gas interfaces simultaneously with the thermal fields in melt and solid. Models for the fluid flows due to the rotation of the feed and crystal rods are completed and the effects of these flows on dopant segregation are studied, especially in the case of zones longer than can be achieved on Earth.

Description: The understanding of the surface tension of liquid metals and alloys from as close to first principles as possible is discussed. The two ingredients which are combined in these calculations are: the electron theory of metals, and the classical theory of liquids, as worked out within the framework of statistical mechanics. The results are a new theory of surface tensions and surface density profiles from knowledge purely of the bulk properties of the coexisting liquid and vapor phases. It is found that the method works well for the pure liquid metals on which it was tested; work is extended to mixtures of liquid metals, interfaces between immiscible liquid metals, and to the temperature derivative of the surface tension.

Description: The preparation of building flight hardware and carrying out experiments in space was investigated. The ground based investigation phase A/B of the experimental float zoning of silicon is outlined. The overall program goals, leading to recommending experiments to be done in phase C/D are spelled out. Thermophysical properties which must be accurately known to compare thermophysical models to experimental zoning of silicon are listed.

Description: The growth technology of Silicon-germanium (Si-Ge) alloys and the possible advantages of growth in microgravity is reviewed. The Si-Ge alloys have a continuous variation of bandgap energy from the germanium bandgap to the silicon bandgap. The unusual two slope behavior of Eg versus composition is due to the differences in the conduction band structure between Si and Ge. Below 17% (atomic), the germanium band structure dominates; and above it, the bands are "silicon like". It is found that the growth of Si-Ge alloys in microgravity is very attractive. In particular, the float zone method, in which a liquid zone of controlled starting composition, used to grow a large amount of useful alloy crystal. Large temperature gradients and relatively flat growth interfaces are necessary to obtain homogeneous crystal growth.

Description: Measurements of the surface tension of molten silicon are reported. For marangoni flow, the important parameter is the variation of surface tension with temperature, not the absolute value of the surface tension. It is not possible to calculate temperature coefficients using surface tension measurements from different experiments because the systematic errors are usually larger than the changes in surface tension because of temperature variations. The lack of good surface tension data for liquid silicon is probably due to its extreme chemical reactivity. A material which resists attack by molten silicon is not found. It is suggested that all of the sessile drip surface tension measurements are probably for silicon which is contaminated by the substrate materials.

Description: The power needed to zone silicon crystals by radio frequency heating was analyzed. The heat loss mechanisms are examined. Curves are presented for power as a function of crystal diameter for commercial silicon zoning.

Description: The power requirements for specific float zone experiments in space are presented. Power figures for the Space Shuttle and projected available power for advanced vehicles are given. The following power related trends are derived: (1) float zone processing of up to 5 cm diameter silicon and 16.0 cm diameter cadmium telluride can be conducted on a Shuttle pallet mission; (2) float zone processing of up to 8.5 cm diameter silicon for 70% total heating efficiency can be conducted on the initial MEC/space platform; (3) projected available host vehicle power for float zone sample heating; (4) induction heating is found to be the most promising heating method; (5) process control and ease of equipment integration into the host vehicle influence heating method selection.

Description: The need for power to grow silicon of a size suitable to make into devices is addressed. The expected results are tied to available power. The projection of the size of float zone crystals as a function of time is discussed. An accompanying graph shows that 4 in. will be the normally used diameter by 1985 and 5 in. by 1990. Material to be tested in device lines in this time frame should be 4 in. or more. The various power losses, 25 kW with a 50% power efficiency, which is much improved over present RF heating efficiencies.

Description: The development of silicon and gallium arsenide crystal growth for the production of large diameter substrates are discussed. Large area substrates of significantly improved compositional purity, dopant distribution and structural perfection on a microscopic as well as macroscopic scale are important requirements. The exploratory use of magnetic fields to suppress convection effects in Czochralski crystal growth is addressed. The growth of large crystals in space appears impractical at present however the efforts to improve substrate quality could benefit from the experiences gained in smaller scale growth experiments conducted in the zero gravity environment of space.

Description: The trend of the device fabrication industry requirement for larger crystals is reviewed. The ranges of properties and uniformities measurement standards needed for resistivity (four-point probe and spreading resistance) and for the chemical composition of oxygen and carbon impurities are presented.

Description: Technical requirements for silicon-based bulk materials are presented, and related work on other materials and on thin layer silicon is summarized. Programs supported by the Wright-Patterson materials laboratory and the capabilities of the materials laboratory in house characterization facility are listed.

Description: The process of vertical zone melting of CdTe and InP is illustrated, and the growth of Cd sub x Hg sub (1 - x)Te and InP sub y As sub (1-y) is considered.

Description: The technical concerns of NASA in the area of space grade solar cells are summarized. Solar power needs are projected through 1987. The degradation of solar cell performance due to the effects of radiation on impurities and crystal defects and the improved performance of float zone silicon are illustrated. The reduction of oxygen and carbon in float zone silicon allows for much faster low temperature annealing of the defects. The effects of improved crystal purity on cell performance are summarized.

Description: The role of float zone silicon in integrated circuits is surveyed. The problem of oxygen thermal donors and their inhomogeneous distribution is predicted to be a critical issue.

Description: Payoffs of crystal growth in space in the areas of understanding growth and melt flow mechanisms, the growth of more uniform crystals with fewer defects, and the growth of crystals difficult or impossible to grow on Earth are summarized. The advantages of various heating methods are summarized. Critical devices requiring the uniformity and lower defect density of crystals grown in space are listed.

Description: The effects on melt impurities of the lack of buoyancy-driven convection in melts and the gas phase are outlined. Probable effects noted are: retardation of convective flow by a thin adsorbed impurity layer because of surface tension gradients (Marangoni flow); changes in the transport of volatile impurities to the melt surface and the consequent reduction of evaporation; and the change in dependence of evaporation rates on pressure due to the absence of convective flow in the gas next to the melt.

Description: Materials processing experiments performed in space since 1973 are listed. Experiments carried out in Skylab, the Apollo Soyuz mission, and on SPAR sounding rockets are included.

Description: The purposes of the float zone working group are summarized. Present and proposed U.S. and European research programs are listed, and power needs for float zoning surveyed. A 1981 to 1991 schedule for development efforts is presented.

Description: The proposed method for the treatment of two dimensional solidification problems is based on quasilinearization of the transformed heat conduction equation and latent heat condition at the interface and an iterative sequence in which these are solved simultaneously. Modern algorithms for solving such sparse systems mean that most of the storage advantage of other methods are reduced and the speed of solution can be improved.

Description: The technology required to accommodate the use of broadened properties fuels in commercial aircraft engine combustors with minimum impact on the emissions, performance, durability and engine operational characteristics is discussed. Emphasis was placed on defining the potential for reducing the fuel sensitivity of the reference combustion system through design refinements and the introduction of more advanced technology combustors. To this end the tests conducted included the evaluation of variations of three different combustor concepts representing progressively more advanced technology levels. It was demonstrated that reduced fuel hydrogen content has adverse impacts on current single stage combustors; the best opportunities for reducing the fuel sensitivity of these combustors are through improved fuel injectors and advanced liner cooling and structural concepts and that the advanced technology staged and variable geometry combustor concepts have inherent operational flexibility that can be exploited to accommodate changes in fuel composition. Also, advanced technology combustor concepts were evaluated. A variable geometry combustor capable of airflow modulation during operation and a new concept which is a further evolution of the Vorbix combustor are discussed.

Description: For several years the Department of Defense has been sponsoring fuel accommodation investigations with gas turbine engine manufacturers and supporting organizations to quantify the effect of changes in fuel properties and characteristics on the operation and performance of military engine components and systems. Inasmuch as there are many differences in hardware between the operational engines in the military inventories, due to differences in design philosophy and requirements, efforts were initially expended to acquire fuel effects data from rigs simulating the hot sections of these different engines. Correlations were then sought using the data acquired to produce more general, generic relationships that could be applied to all military gas turbine engines regardless of their origin. Finally, models could be developed from these correlations that could predict the effect of fuel property changes on current and future engines. This presentation describes some of the work performed by Pratt and Whitney Aircraft, under Naval Air Propulsion Center sponsorship, to determine the effect of fuel properties on the hot section and fuel system of the Navy's TF30-P-414 gas turbine engine.

Description: In an attempt to rigorously study the fuel chemical property influence, UTRC (United Technologies Research Center) (under contract to NASA Lewis Research Center) has conducted an experimental program using 25 test fuels. The burner was a 12.7 cm dia cylindrical device consisting of six sheet metal louvers. A single pressure atomizing injector and air swirler were centrally mounted with the conical dome. Fuel physical properties were de-emphasized by using fuel injectors which produced highly atomized, and hence rapidly vaporizing sprays. A substantial fuel spray characterization effort was conducted to allow selection of nozzles which assured that such sprays were achieved for all fuels. The fuels were specified to cover the following wide ranges of chemical properties: hydrogen, 9.1 to 15 (wt) pct; total aromatics, 0 to 100 (vol) pct; and naphthalene, 0 to 30 (vol) pct. They included standard fuel (e.g., Jet A, JP4), specialty products (e.g., decalin, xylene tower bottoms) and special fuel blends. Included in this latter group were six, 4-component blends prepared to achieve parametric variations in fuel hydrogen, total aromatics and naphthalene contents.

Description: Magneto-optical devices based on Bragg diffraction of light by magnetostatic waves (MSW's) offer the potential of large time-bandwidth optical signal processing at microwave frequencies of 1 to 20 GHz and higher. A thin-film integrated-optical configuration, with the interacting MSW and guided-optical wave both propagating in a common ferrite layer, is necessary to avoid shape-factor demagnetization effects. The underlying theory of the MSW-optical interaction is outlined, including the development of expressions for optical diffraction efficiency as a function of MSW power and other relevant parameters. Bradd diffraction of guided-optical waves by transversely-propagating magnetostatic waves and collinear TE/TM mode conversion included by MSW's have been demonstrated in yttrium iron garnet (YIG) thin films. Diffraction levels as large as 4% (7 mm interaction length) and a modulation dynamic range of approx 30 dB have been observed. Advantages of these MSW-based devices over the analogous acousto-optical devices include: much greater operating frequencies, tunability of the MSW dispersion relation by varying either the RF frequency or the applied bias magnetic field, simple broad-band MSW transducer structures (e.g., a single stripline), and the potential for very high diffraction efficiencies.

Description: The solution of matrix equations is essential to carrying out a large variety of control algorithms and to reducing certain types of data such as the output of a multispectral sensor array. Optical techniques and, in particular, integrated-optical circuits (IOC's) can provide compact, low-power devices for performing the mitrix multiplications necessary for the solution of these problems. A specific IOC for performing vector-matrix multiplication and several approaches to the design of IOC's for matrix-matrix multiplication will be discussed.

Description: A geometry modeling method was developed to define three-dimensional mesh configurations, which were expressed by the set of surface intersections with a coordinate mesh. These configurations define bodies for transonic potential-flow computation in simple physical coordinates. Various configurations were prepared for 3-D potential flow analysis, including many bare inlet models in cylindrical coordinates. Trimmed surface models were used to prepare nacelle installation configurations. A variety of ducts and mixers were represented. Analytically defined mesh/surface intersections were compared with similar data obtained from the corresponding surface model. Parameters for an analytic surface definition from mesh-surface intersections obtained from a model of the surface were produced. In both studies the modeling accuracy was shown to be compatible with the flow analysis requirements. This technique fulfills the requirements of the associated three-dimensional potential-flow analysis. It preserves the flow analysis method's superior flexibility for adapting to unusual geometries. The geometry modeling technique is supported by a sufficient set of tools for effective use by general users, and sufficient accuracy was demonstrated.

Description: The applications of the photo-activated, the CCD-addressed, and the variable-grating mode liquid crystal light valves (LCLVs) to optical data processing are described. These applications include image correlation, level slicing, spectral analysis and correlation, bi-spectral image division, and matrix-matrix multiplication.

Description: An original algorithm which solves the classical computer graphics problem of eliminating those lines that should not be visible in a wire-frame model representation of a solid figure is presented. The basis of this Triangle Compare algorithm is that any polygon, regardless of its complexity, can be constructed from a set of triangles. In the Triangle Compare algorithm, once the triangles defining the figure are defined, they are ordered based on the nearness of each triangle to the viewer and stored in a linked list. The nearest triangle are compared to all succeeding triangles. The remaining parts of triangles are synthesized into other triangles and are added in order to the linked list. Subsequent reference triangles are provided by a traversal of the linked list. After the entire list is traversed and each triangle used as a reference, the resulting list is used for a final rendering with hidden lines removed via calligraphic MOVE and DRAW commands.

Description: An efficient 3-D geometry graphics software package which is suitable for advanced design studies was developed. The advanced design system is called GRADE--Graphics for Advanced Design. Efficiency and ease of use are gained by sacrificing flexibility in surface representation. The immediate options were either to continue development of GRADE or to acquire a commercially available system which would replace or complement GRADE. Test cases which would reveal the ability of each system to satisfy the requirements were developed. A scoring method which adequately captured the relative capabilities of the three systems was presented. While more complex multi-attribute decision methods could be used, the selected method provides all the needed information without being so complex that it is difficult to understand. If the value factors are modestly perturbed, system Z is a clear winner based on its overall capabilities. System Z is superior in two vital areas: surfacing and ease of interface with application programs.

Description: Gas turbine engine design requires the ability to rapidly develop complex structures which are subject to severe thermal and mechanical operating loads. As in all facets of the aerospace industry, engine designs are constantly driving towards increased performance, higher temperatures, higher speeds, and lower weight. The ability to address such requirements in a relatively short time frame has resulted in a major thrust towards integrated design/analysis/manufacturing systems. These computer driven graphics systems represent a unique challenge, with major payback opportunities if properly conceived, implemented, and applied.

Description: The role of data base management in CAD/CAM, particularly for geometric data is described. First, long term and short term objectives for CAD/CAM data management are identified. Second, the benefits of the data base management approach are explained. Third, some of the additional work needed in the data base area is discussed.

Description: The use of computer graphics and its application to aerodynamic analyses on a routine basis is outlined. The mathematical modelling of the aircraft geometries and the shading technique implemented are discussed. Examples of computer graphics used to display aerodynamic flow field data and aircraft geometries are shown. A future need in computer graphics for aerodynamic analyses is addressed.

Description: The Data Engineering System (DES) is a computer-based system that organizes technical data and provides automated mechanisms for storage, retrieval, and engineering analysis. The DES combines the benefits of a structured data base system with automated links to large-scale analysis codes. While the DES provides the user with many of the capabilities of a computer-aided design (CAD) system, the systems are actually quite different in several respects. A typical CAD system emphasizes interactive graphics capabilities and organizes data in a manner that optimizes these graphics. On the other hand, the DES is a computer-aided engineering system intended for the engineer who must operationally understand an existing or planned design or who desires to carry out additional technical analysis based on a particular design. The DES emphasizes data retrieval in a form that not only provides the engineer access to search and display the data but also links the data automatically with the computer analysis codes.

Description: Craters within the Ganymede Jg-7 quadrangle were divided into seven mappable units. The units represent: (1) irregular or elongate craters, (2) craters with dark ejecta, (3) palimpsests, (4) secondary craters, (5) and craters of young, mature, and old age. Symbols used for crater floors include: (1) flat floors, (2) floors with pits, (3) floora with a central dome or peak, (4) and floors with a central dome and pit. Grooved terrains were divided into five mappable units. Three units of light grooved material represent small, medium, and large grooves, which are arbitrarily divided. The other two units of grooved terrain represent dark grooved materials, and reticulate grooves. Two units of ungrooved dark terrain and two units of ungrooved light terrain were defined. In Galileo Regio, two units were defined repesenting large furrowed grooves, and smaller grooves which are orthogonal to the furrowed grooves.

Description: The relative time of emplacement of some major rock units on Mars was recognized to some degree from geologic mapping using Mariner Images. Correlation charts showing the map units and their position in sequence, however, displayed little discrimination in their vertical range of occurrence. A more detailed time-stratigraphy is currently being developed as Viking geologic mapping of the planet progresses.

Description: Although many radar profiles and images of the area within 20 deg of Mercury's equator had been obtained from 1971 to 1981, at both Goldstone and Arecibo radar facilities, surprisingly little geological analysis had been done with these data until recently. Topographic profiles and radar roughness reflectivity images which can be derived from these data will be crucial in completing the geological mapping of Mercury now underway at the U.S. Geological Survey. Processing of available radar data must be completed to establish any systematic relationship between radar reflectivities and roughness, density, dielectric constant, and other related geological parameters. Specific tasks accomplished for these purposes include the following. Documentation was located and searched to establish the type and quantity of Goldstone 12.5 cm radar observations which were available for Mercury. Data has been collected during approximately 50 observation periods from 1971 to 1981. About half of the data, collected during 1972 and 1973, have been processed, but without adequate documentation. A standardized, well-documented procedure for processing and analysis for all Goldstone Earth-based observations of Mercury was established.

Description: The origin of Mars surface units and the extent of subsequent cratering play key roles in determining surface texture. At scale sizes of 0.1-10 meters, however, there is a growing body of evidence that wind is the dominant force. The direct and indirect evidence which implies that meter-scale surface texture on Mars is controlled by the wind is presented. Since radar is uniquely sensitive to structure on these scales, radio wave scattering data can provide insight on aeolian activity available from no other source.

Description: Three solid modellers (SMs) are evaluated in this study. The findings and opinions about their merits and deficiencies are discussed.

Description: Research aimed at producing new generations of solid modelling systems, and at extending the applications of solid modelling, is in progress and will be discussed briefly in this paper. Three major bodies of work are emerging: solid-modelling extensions, applications in design, and applications in production. Each area contains many parallel streams of work, with considerable cross-flow of concepts and techniques between the streams and areas.

Description: Structural and tectonic interpretations of planetary surfaces rely strongly on visual determination of regional structural grain. This grain can be very complex and confusing, and sorting out of discrete trends in time and space is of utmost importance. This study is a test of these techniques applied to a well known area having several discrete structural grains. In the Bighorn Basin region of Wyoming, a largely overlooked N10E structural grain has been verified with detailed structural analysis and indicates a significant change in stress orientation at the end of the Laramide orogeny.

Description: Two old volcano-tectonic collapse structures are exposed north and northeast of the huge shield volcano, Olympus Mons. They are semicircular and were probably low shield volcanoes similar to Alba Patera, but whose central portions have subsided or collapsed. They form the basement upon which younger volcanic materials of Alba Patera Olympus Mons have been emplaced. The oldest structure, Acheron Fossae is over 700 km across and is north of Olympus Mons. It has a surface of considerable relief broken by graben and extensive en echelon and parallel fractures and faults with varied displacements. Acheron Fossae is the most densely cratered in the Olympus Mons region. The structure must have formed very early in martian time. The second is Halex Fossae, northeast of Olympus Mons. Where exposed, it is cut by a series of arcuate grabens that become closer spaced toward its center. The radii of the fractures indicate that the structure may be at least 250 km across and centered beneath the Olympus Plains. Lava flows appear to have issued from some of the arcuate fractures and to have flowed radially away from the center of Halex Fossae. North of Halex Fossae, material of the same age as Halex Fossae overlaps Acheron Fossae.

Description: Isolated knobs that are erosional remnants of central volcanoes or of folded rocks occur in several areas of the Altiplano are visible on both optical and images. The optically visible streaks occur in the immediate lee of the knobs, whereas the radar visible streaks occur in the zone downwind between the knobs. Aerial reconnaissance and field studies showed that the optically visible streaks consist of a series of small ( 100 m wide) barchan and barchanoid dunes, intradune sand sheets, and sand hummocks (large shrub coppice dunes) up to 15 m across and 5 m high. On LANDSAT images these features are poorly resolved but combine to form a bright streak. On the radar image, this area also appears brighter than the zone of the radar dark streak; evidently, the dunes and hummocks serve as radar reflectors. The radar dark streak consists of a relatively flat, smooth sand sheet which lacks organized aerolian bedforms, other than occasional ripples. Wind velocity profiles show a greater U value in the optically bright streak zone than in the radar dark streak.

Description: The terrain analysis software package was restructured and documentation was added. A program was written to test Johnson Space Center's four band scatterometer data for spurious signals data. A catalog of terrain roughness statistics and calibrated four frequency multipolarization scatterometer data is being published to support the maintenance of Death Valley as a radar backscatter calibration test site for all future airborne and spacecraft missions. Test pits were dug through sand covered terrains in the Eastern Sahara to define the depth and character of subsurface interfaces responsible for either backscatter or specular response in SIR-A imagery. Blocky sandstone bedrock surfaces at about 1 m depth were responsible for the brightest SIR-A returns. Irregular very dense CaCO3 cemented sand interfaces were responsible for intermediate grey tones. Ancient river valleys had the weakest response. Reexamination of SEASAT l-band imagery of U.S. deserts continues.

Description: High spatial resolution data from the Viking infrared thermal mapper (IRTM) are used to examine the Tharsis volcanoes which are situated within a vast area of low thermal inertia material very fine particle size or very high porosity, with the volcanoes having the lowest thermal inertias. Thermal infrared images of the 1823 flow on Kilauea's southwest rift zone show lower thermal inertias near the vent area where shelly pahoehoe is common while individual channelized aa flows with abundant broken pahoehoe slabs are higher thermal inertia. The increase in aa flows to the southeast leads to a general trend of increasing thermal inertias from near vent to distal areas. Martian shield volcanoes have thermal inertias equal to or higher than their surrounding plans when atmospheric effects are removed from the data. The general increase in thermal inertias away from the summit calderas is consistent with the trend of the Hawaiian 1823 flow and may be related to changing lava properties away from the summit.

Description: A photometrically and geometrically reduced data base is being produced for the Galilean Satellites using Voyager Imaging data. The basic data set used is essentially all the useful satellite images returned by Voyager. Each frame was radiometrically calibrated and many are projected into cartographic formats. Mosaics of low, medium and high resolution frames being made for each satellite consist of registered digital images with intensity values scaled through a traceable calibration procedure to normal albedo values. Many of the mosaics are being made in two versions. One version is an albedo version and the second is a maximum discrimination version in which large variations in brightness across the picture are suppressed.

Description: One unique feature on Mars is the presence of ring furrows which are apparently produced by inversion of topography at the rims of partially buried craters. Ring furrows are flat-floored trenches, circular in plan view, forming rings 7 to 50 km in diameter. The moat is on the order of 0.5 km deep and 2 to 10 km wide, and it surrounds a flat topped circular mesa or plateau that is 5 to 40 km across. The central plateau is at the same elevation or lower than the surrounding plain outside the ring. The circular nature and size range of ring furrows tend to suggest that these features are related to craters partially buried by younger lava flows. The rings have been formed by preferential removal of the exposed crater rims. Ground ice decay, sapping, or fluvial erosion removed the less resistant, porous material of crater rims while leaving the more resistant volcanic flow material. Differential erosion has thus led to a reversal of topography in which the original positive relief of the rim is reduced to a negative relief feature.

Description: The morphology of channels, valleys, chaotic and fretted terrains and many smaller features on Mars is consistent with the hypothesis that localized deterioration of thick layers of ice-rich permafrost was a dominant geologic process on the Martian surface. Such ground ice deterioration gave rise to large-scale mass movement, including sliding, slumping and sediment gravity flowage, perhaps also catastropic floods. In contrast to Earth, such mass movement processes on Mars lack effective competition from erosion by surface runoff. Therefore, Martian features due to mass movement grew to reach immense size without being greatly modified by secondary erosional processes. The Viking Mission to Mars in 1976 provided adequate measurements of the relevant physical parameters to constrain models for Martian permafrost.