ALBERT

Description: In the boreal summer of 2021, the equatorial Atlantic experienced the strongest warm event, that is, Atlantic Niño, since the beginning of satellite observations in the 1970s. Such events have far‐reaching impacts on large‐scale wind patterns and rainfall over the surrounding continents. Yet, developing a paradigm of how Atlantic Niño interacts with the upper‐ocean currents and intraseasonal waves remains elusive. Here we show that the equatorial Kelvin wave associated with the onset of the 2021 Atlantic Niño modulated both the background flow and the eddy flux of the equatorial upper‐ocean circulation, causing an extremely weak and delayed tropical instability wave (TIW) season. TIW‐induced variations of sea surface temperature (SST), sea surface salinity, sea surface height, and eddy temperature advection were exceptionally weak during May to July, the climatological peak of TIW activity, but rebounded in August when higher than normal variability was observed. Moored velocity data at 23°W show that during the peak of the 2021 Atlantic Niño from June to August, the Equatorial Undercurrent was deeper and stronger than usual. An anomalously weak eddy momentum flux strongly suppressed barotropic energy conversion north of the equator from May to July, likely contributing to low TIW activity. Reduced baroclinic energy conversion also might have played a role, as the meridional gradient of SST was sharply reduced during the Atlantic Niño. Despite extremely weak TIW velocities, modest intraseasonal variability of chlorophyll‐a (Chl‐ a ) was observed during the Atlantic Niño, due to pronounced meridional Chl‐ a gradients that partly compensated for the weak TIWs. Plain Language Summary Every few years the eastern equatorial Atlantic Ocean is significantly warmer than usual during boreal summer. Such warm events are referred to as Atlantic Niño events, and share similarities with El Niño events in the Pacific. In 2021, the strongest Atlantic Niño in at least four decades was observed in the equatorial Atlantic. This study is the first that investigates the complex interaction between Atlantic Niño, tropical Atlantic upper‐ocean currents, and equatorial waves based on various observational data sets. We show that the developing 2021 Atlantic Niño weakened both the background flow and the variability of near‐surface currents in May, which in turn largely reduced the strength of intraseasonal (20–50 days) waves that are usually generated by instability of the upper‐ocean zonal currents. As a consequence, the cooling effect that these waves usually have north of the equator and the warming effect along the equator vanished from May to July 2021. Interestingly, variability of chlorophyll concentration was enhanced, suggesting that enhanced meridional chlorophyll gradients compensated for reduced wave activity. Key Points The developing 2021 Atlantic Niño led to weaker equatorial surface currents and reduced vertical shear of upper‐ocean horizontal velocity Strong reduction of the surface flow, eddy flux, and meridional temperature gradient in May caused extremely weak and delayed tropical instability wave (TIW) season Reduced meridional TIW advection contributed to sharpen the north equatorial Chl‐ a front resulting in modest intraseasonal Chl‐ a variability

Description: Phytoplankton primary productivity (PP) varies significantly over environmental gradients, particularly in physically‐dynamic systems such as estuaries and coastal seas. During summer, runoff peaks in the Changjiang River driving large environmental gradients in both the Changjiang estuary and adjacent East China Sea (ECS), likely driving significant variability in PP. As satellite models of PP often underperform in coastal waters, we aimed to develop a novel approach for assessing net PP variability in such a dynamic environment. Parallel in situ measurements of Fast Repetition Rate (FRR) fluorometry and carbon (C) uptake rates were conducted for the first time in this region during two summer cruises in 2019 and 2021. A series of 13 C‐incubations ( n = 31) were performed, with measured PP ranging from ∼6 to 1,700 mgC m −3 d −1 . Net PP values were significantly correlated with salinity ( r = 0.45), phytoplankton chlorophyll a (Chl‐ a , r = 0.88), Photosystem II (PSII) functional absorption cross‐section ( σ PSII , r = −0.76) and maximum PSII quantum yield ( F v / F m , r = 0.59). Stepwise regression analysis showed that Chl‐ a and σ PSII were the strongest predictors of net PP. A generalized additive model (GAM) was also used to estimate net PP considering nonlinear effects of Chl‐ a and σ PSII . We demonstrate that GAM outperforms linear modeling approaches in estimating net PP in this study, as evidenced by a lower root mean square error (∼140 vs. 250 mgC m −3 d −1 ). Our novel approach provides a valuable tool to examine carbon cycling dynamics in this important region. Plain Language Summary The East China Sea has a complex current system that creates a highly dynamic physical environment for phytoplankton, particularly during the summer months. Net primary productivity (PP) is highly variable in this region, yet characterizing these spatial patterns in PP is difficult due to the lack of a high‐resolution data collecting method. Therefore, a strong need exists for a quick and easily implemented method for monitoring PP in this dynamic system. Based on parallel measurements of phytoplankton biomass and photophysiology, we present a novel approach that allows us to rapidly and easily assess regional PP at a high resolution. The high data volume potentially afforded by our net PP estimation method could not only contribute to a better understanding of PP variations in such a dynamic environment, but also help fill the large gaps in field data needed for validating satellite‐based PP models. Key Points Parallel in situ measurements of net primary productivity (PP) and Fast Repetition Rate fluorometry were conducted in the Changjiang estuary Productivity was highest at stations with high Chl and low σ PSII , typically located along the Chiangjiang river plume front A generalized additive model was developed to estimate net PP, providing an approach for assessing regional C‐cycling dynamics

Description: Hydrothermal fluids in ultramafic‐hosted hydrothermal systems associated with oceanic detachment faults can be more oxidizing compared to mafic‐hosted vent sites. These fluids form a mineral assemblage of pyrite, magnetite and hematite. At 13°30′N on the Mid‐Atlantic Ridge, chlorite‐quartz breccias recovered from an exposed fault scarp contain pyrite, with abundant magnetite and hematite, indicating that the redox of the fluids was variable. In primary micron‐scale zonations in pyrite, Ni, Co, and Se have a decoupled relationship, recording fluctuations in the chemical composition and temperature of hydrothermal fluid as the grains grew. Secondary zonations that erase and overprint primary zonations are limited to the grain margin and permeable regions within the grain core. Secondary zonations formed via two processes: (a) grain dissolution followed by overgrowth, and (b) remobilization of metals during oxidizing fluid flow events. In both instances, Ni and Co have been mobilized and concentrated, and are not lost to the hydrothermal fluid. Superimposed on these features is evidence of grain scale deformation related to periods of fault movement along the detachment surface. Sulfur isotope ratios (δ 34 S) in pyrite systematically decrease from the grain margin to the grain core, indicating that increased amounts of sulfur were derived from thermochemical sulfate reduction of seawater. Thus, pyrite records the evolution of fluid flow and deformation events during exhumation along the detachment surface from ∼1 to 2 km below the seafloor at the base of the lava pile, with temporal fluctuations in fluid redox identified as an important process in controlling Ni and Co enrichment in pyrite. Plain Language Summary Detachment faults are long lived faults that can expose ultramafic rocks at the seafloor. We aim to investigate the links between hydrothermal activity and detachment fault formation. To do this we use pyrite as a tape recorder for past fluid flow events. Across individual mineral grains, distinct zonations in metal content and sulfur isotope ratios show that the incursion of seawater occurred periodically during pyrite growth, increasing during fault movement events that lead to changes in the temperature and pH of the fluids in the fault zone. These changes concentrated metals toward the center of individual mineral grains. Zonations were then overprinted by later deformation‐related events, providing evidence that the samples formed at deeper crustal levels below the seafloor and were progressively exhumed at the seafloor over time. Key Points Microtextural, geochemical, and isotopic variations in subseafloor pyrite record the history of sample exhumation along a detachment fault Nickel and Co are remobilized and concentrated in pyrite across individual mineral grains in response to fluctuating fluid redox conditions Evidence of pyrite deformation and alteration mineralogy of samples indicates sample exhumation from a depth of 1–2 km

Description: The coastal ocean contributes to regulating atmospheric greenhouse gas concentrations by taking up carbon dioxide (CO2) and releasing nitrous oxide (N2O) and methane (CH4). In this second phase of the Regional Carbon Cycle Assessment and Processes (RECCAP2), we quantify global coastal ocean fluxes of CO2, N2O and CH4 using an ensemble of global gap-filled observation-based products and ocean biogeochemical models. The global coastal ocean is a net sink of CO2 in both observational products and models, but the magnitude of the median net global coastal uptake is similar to 60% larger in models (-0.72 vs. -0.44 PgC year-1, 1998-2018, coastal ocean extending to 300 km offshore or 1,000 m isobath with area of 77 million km2). We attribute most of this model-product difference to the seasonality in sea surface CO2 partial pressure at mid- and high-latitudes, where models simulate stronger winter CO2 uptake. The coastal ocean CO2 sink has increased in the past decades but the available time-resolving observation-based products and models show large discrepancies in the magnitude of this increase. The global coastal ocean is a major source of N2O (+0.70 PgCO2-e year-1 in observational product and +0.54 PgCO2-e year-1 in model median) and CH4 (+0.21 PgCO2-e year-1 in observational product), which offsets a substantial proportion of the coastal CO2 uptake in the net radiative balance (30%-60% in CO2-equivalents), highlighting the importance of considering the three greenhouse gases when examining the influence of the coastal ocean on climate. The coastal ocean regulates greenhouse gases. It acts as a sink of carbon dioxide (CO2) but also releases nitrous oxide (N2O) and methane (CH4) into the atmosphere. This synthesis contributes to the second phase of the Regional Carbon Cycle Assessment and Processes (RECCAP2) and provides a comprehensive view of the coastal air-sea fluxes of these three greenhouse gases at the global scale. We use a multi-faceted approach combining gap-filled observation-based products and ocean biogeochemical models. We show that the global coastal ocean is a net sink of CO2 in both observational products and models, but the coastal uptake of CO2 is similar to 60% larger in models than in observation-based products due to model-product differences in seasonality. The coastal CO2 sink is strengthening but the magnitude of this strengthening is poorly constrained. We also find that the coastal emissions of N2O and CH4 counteract a substantial part of the effect of coastal CO2 uptake in the atmospheric radiative balance (by 30%-60% in CO2-equivalents), highlighting the need to consider these three gases together to understand the influence of the coastal ocean on climate. We synthesize air-sea fluxes of CO2, nitrous oxide and methane in the global coastal ocean using observation-based products and ocean models The coastal ocean CO2 sink is 60% larger in ocean models than in observation-based products due to systematic differences in seasonality Coastal nitrous oxide and methane emissions offset 30%-60% of the CO2 coastal uptake in the net radiative balance

Description: The past ∼200 million years of Earth's geomagnetic field behavior have been recorded within oceanic basalts, many of which are only accessible via scientific ocean drilling. Obtaining the best possible paleomagnetic measurements from such valuable samples requires an a priori understanding of their magnetic mineralogies when choosing the most appropriate protocol for stepwise demagnetization experiments (either alternating field or thermal). Here, we present a quick, and non‐destructive method that utilizes the amplitude‐dependence of magnetic susceptibility to screen submarine basalts prior to choosing a demagnetization protocol, whenever conducting a pilot study or other detailed rock‐magnetic characterization is not possible. We demonstrate this method using samples acquired during International Ocean Discovery Program Expedition 391. Our approach is rooted in the observation that amplitude‐dependent magnetic susceptibility is observed in basalt samples whose dominant magnetic carrier is multidomain titanomagnetite (∼TM 60–65 , (Ti 0.60–0.65 Fe 0.35–0.40 )Fe 2 O 4 ). Samples with low Ti contents within titanomagnetite or samples that have experienced a high degree of oxidative weathering do not display appreciable amplitude dependence. Due to their low Curie temperatures, basalts that possess amplitude‐dependence should ideally be demagnetized either using alternating fields or via finely‐spaced thermal demagnetization heating steps below 300°C. Our screening method can enhance the success rate of paleomagnetic studies of oceanic basalt samples. Plain Language Summary Oceanic basalts are ideal recorders of the Earth's magnetic field. To decipher magnetic histories recorded in rocks, paleomagnetists need to isolate the magnetization directions and intensities within rocks by one of two possible methods. One method typically involves progressively heating the samples to high temperatures. The other method involves exposing samples to alternating magnetic fields with increasing peak field intensities. Both of these methods are ultimately destructive to the original magnetization preserved within rocks. However, without knowledge of a given rock's magnetic mineralogy, randomly choosing thermal or alternating field demagnetization methods may result in high failure rates. We developed a pre‐screening method to help decide which cleaning method will likely be more successful for a given sample based on low‐field magnetic susceptibility measurements. These measurements do not affect the original magnetic information recorded in a rock, thereby permitting subsequent paleomagnetic studies on the same sample. Our technique can be performed as rapidly as 2 min per sample, is non‐destructive, and does not require complicated sample preparation. Key Points Paleomagnetic studies utilize either alternating field or thermal demagnetization, but it is difficult to choose the best protocol a priori Amplitude‐dependence of magnetic susceptibility measurements permits preliminary magnetic mineralogy characterization in submarine basalts Rapid amplitude‐dependence measurements may aid in deciding upon the best demagnetization protocol for submarine basalt samples

Description: Marginal seas influenced by large rivers are characterized by complex hydrodynamic and organic matter cycling processes. However, the impacts of hydrodynamics on the composition and reactivity of particulate organic matter (POM) remain unclear. Here we conducted a comprehensive study on the bulk, molecular and biological properties of suspended POM in the Changjiang Estuary and adjacent area subjected to strong currents, eddies as well as typhoons during spring and autumn. D/L‐enantiomers of particulate amino acids (PAA) were analyzed to evaluate the bioreactivity of POM and quantify bacterial‐derived organic carbon. We found that POM bioavailability as indicated by carbon‐normalized yields of PAA (PAA‐C%) reflected the ecosystem productivity. Relatively high PAA‐C% values (20−35%) were observed in productive areas influenced by Changjiang River plume, cyclonic eddies and typhoons, likely related to the enhanced nutrient availability arising from hydrodynamic processes. In contrast, the oligotrophic Taiwan Warm Current‐influenced regions featured relatively low POM bioavailability (PAA‐C% 〈 10%) despite typhoons facilitating water mixing. The PAA‐C% values showed a significant positive correlation with extracellular enzyme activity, indicating that bioavailable POM can rapidly stimulate heterotrophic transformation. Hot spots of elevated bioavailable POM showed high contributions of bacterial organic carbon. A large portion (∼2/3) of bacterial organic carbon was present in the form of bacterial detritus, suggesting that patches of these biological hot spots represent important sites of carbon sequestration. Together, our findings indicate that fresh POM production is largely controlled by nutrient supply driven by hydrodynamic processes, with important implications for carbon sequestration in the dynamic ocean margins. Plain Language Summary Marginal seas are subject to complex hydrodynamic processes and play an important role in carbon sequestration. Disentangling the linkages between hydrodynamics and organic carbon reactivity and composition is crucial to understanding the regional carbon cycle. Here we collected suspended particulate organic matter (POM) in the Changjiang Estuary and adjacent coastal areas. Based on the biomarker D/L‐amino acids, we assessed the bioavailability of POM and quantified the organic carbon originating from bacteria. We found that high bioactivity of POM occurred in productive Changjiang River plume, cyclonic eddy, and typhoon influenced areas. These hydrodynamic processes appear to increase nutrient availability, therefore promoting phytoplankton growth. Bioavailable POM can rapidly stimulate heterotrophic activity and facilitate the transformation of algal‐derived organic carbon to bacterial detritus, thus contributing to carbon sequestration. Our findings suggest that the production of bioavailable POM is largely controlled by hydrodynamically driven nutrient supply. Key Points We use D/L‐amino acids to assess the bioreactivity and bacterial origins of particulate organic matter (POM) in the dynamic Changjiang Estuary and adjacent area High bioavailability of POM occurs in productive regions affected by Changjiang River plume, cyclonic eddies and typhoons Hot spots of bioavailable POM represent important sites for carbon sequestration

Description: Iodine cycling in the ocean is closely linked to productivity, organic carbon export, and oxygenation. However, iodine sources and sinks at the seafloor are poorly constrained, which limits the applicability of iodine as a biogeochemical tracer. We present pore water and solid phase iodine data for sediment cores from the Peruvian continental margin, which cover a range of bottom water oxygen concentrations, organic carbon rain rates and sedimentation rates. By applying a numerical reaction‐transport model, we evaluate how these parameters determine benthic iodine fluxes and sedimentary iodine‐to‐organic carbon ratios (I:C org ) in the paleo‐record. Iodine is delivered to the sediment with organic material and released into the pore water as iodide (I − ) during early diagenesis. Under anoxic conditions in the bottom water, most of the iodine delivered is recycled, which can explain the presence of excess dissolved iodine in near‐shore anoxic seawater. According to our model, the benthic I − efflux in anoxic areas is mainly determined by the organic carbon rain rate. Under oxic conditions, pore water dissolved I − is oxidized and precipitated at the sediment surface. Much of the precipitated iodine re‐dissolves during early diagenesis and only a fraction is buried. Particulate iodine burial efficiency and I:C org burial ratios do increase with bottom water oxygen. However, multiple combinations of bottom water oxygen, organic carbon rain rate and sedimentation rate can lead to identical I:C org , which limits the utility of I:C org as a quantitative oxygenation proxy. Our findings may help to better constrain the ocean's iodine mass balance, both today and in the geological past. Key Points The impact of early diagenesis on benthic iodine fluxes and iodine burial was quantitatively evaluated using a reaction‐transport model Dissolved iodine anomalies in the water column are indicative of benthic efflux from anoxic sediments with high organic carbon turnover Not only bottom water oxygen but also organic carbon delivery and sedimentation rate determine sedimentary iodine‐to‐organic carbon ratios

Description: The understanding of silicate weathering and its role as a sink for atmospheric CO 2 is important to get a better insight into how the Earth shifts from warm to cool climates. The lithium isotope composition (δ 7 Li) of marine carbonates can be used as a proxy to track the past chemical weathering of silicates. A high‐resolution δ 7 Li record would be helpful to evaluate the role of silicate weathering during the late Cretaceous climate cooling. Here, we assess chalk as a potential archive for reconstructing Late Cretaceous seawater Li isotope composition by comparing Maastrichtian chalk from Northern Germany (Hemmoor, Kronsmoor) to a Quaternary coccolith ooze from the Manihiki Plateau (Pacific Ocean) as a lithological analog to modern conditions. We observe a negative offset of 3.9 ± 0.6‰ for the coccolith ooze relative to the modern seawater Li isotope composition (+31.1 ± 0.3‰; 2SE; n = 54), a value that falls in the range of published offsets for modern core‐top samples and for brachiopod calcite. Further, the negative offset between the Li isotope compositions of Manihiki coccolith ooze and modern planktonic foraminifera is 2.3 ± 0.6‰. Although chalk represents a diagenetically altered modification of pelagic nannofossil ooze, manifested by changes in the composition of trace elements, we observe a consistent offset of Li isotope data between Maastrichtian chalk and Maastrichtian planktonic foraminiferal data (−1.4 ± 0. 5‰) that lies within the uncertainty of modern values. We therefore suggest that chalk can be used as a reliable archive for δ 7 Li reconstructions. Key Points Chalk is a reliable archive for the Li isotope composition of seawater Coccolith ooze has a negative offset of 3.9 ± 0.6‰ from modern seawater for Li isotope ratios The estimated mean value for the late Maastrichtian seawater Li isotope composition is +27.5 ± 1.0‰

Description: Key Points: - North Atlantic biases are alleviated by an eddying nested ocean configuration embedded in a global climate model, FOCI-VIKING10 - It is indicated that reduction of the North Atlantic biases could improve the representation of NAO sub-decadal (8 years) variability - For detecting weak external imprints with limited computational resources, an ensemble with a coarse-resolution model is favorable Increasing the horizontal resolution of an ocean model is frequently seen as a way to reduce the model biases in the North Atlantic, but we are often limited by computational resources. Here, a two-way nested ocean model configuration (VIKING10) that consists of a high-resolution (1/10°) component and covers the northern North Atlantic, is embedded in a 1/2° ocean grid as part of the global chemistry-climate model, FOCI (called FOCI-VIKING10). This configuration yields a significantly improved path of the North Atlantic current (NAC), which here reduces the North Atlantic cold bias by ∼50%. Compared with the coarse-resolution, non-eddying model, the improved thermal state of upper ocean layers and surface heat fluxes in a historical simulation based on FOCI-VIKING10 are beneficial for simulating the subdecadal North Atlantic Oscillation (NAO) variability (i.e., a period of 8 years). A northward drift of the NAO-forced ocean thermal anomalies as seen in observations and the eddying FOCI-VIKING10, provide a lagged ocean feedback to the NAO via changes in the net surface heat flux, leading to the NAO periodicity of 8 years. This lagged feedback and the 8 years variability of the NAO cannot be captured by the non-eddying standard FOCI historical simulation. Furthermore, the argumentative responses of the North Atlantic to the 11-year solar cycle are re-examined in this study. The reported solar-induced NAO-like responses are confirmed in the 9-member ensemble mean based on FOCI but with low robustness among individual members. A lagged NAO-like response is only found in the nested eddying simulation but absent from the non-eddying reference simulation, suggesting North Atlantic biases importantly limit climate model capability to realistically solar imprints in North Atlantic climate.

Description: “Flip‐flop” detachment mode represents an endmember type of lithosphere‐scale faulting observed at almost amagmatic sections of ultraslow‐spreading mid‐ocean ridges. Recent numerical experiments using an imposed steady temperature structure show that an axial temperature maximum is essential to trigger flip‐flop faults by focusing flexural strain in the footwall of the active fault. However, ridge segments without significant melt budget are more likely to be in a transient thermal state controlled, at least partly, by the faulting dynamics themselves. Therefore, we investigate which processes control the thermal structure of the lithosphere and how feedbacks with the deformation mechanisms can explain observed faulting patterns. We present results of 2‐D thermo‐mechanical numerical modeling including serpentinization reactions and dynamic grain size evolution. The model features a novel form of parametrized hydrothermal cooling along fault zones as well as the thermal and rheological effects of periodic sill intrusions. We find that the interplay of hydrothermal fault zone cooling and periodic sill intrusions in the footwall facilitates the flip‐flop detachment mode. Hydrothermal cooling of the fault zone pushes the temperature maximum into the footwall, while intrusions near the temperature maximum further weaken the rock and promote the formation of new faults with opposite polarity. Our model allows us to put constraints on the magnitude of two processes, and we obtain most reasonable melt budgets and hydrothermal heat fluxes if both are considered. Furthermore, we frequently observe two other faulting modes in our experiments complementing flip‐flop faulting to yield a potentially more robust alternative interpretation for existing observations. Plain Language Summary At mid‐ocean ridges, two plates diverge and new seafloor is created. The nature and appearance of this new seafloor strongly depend on spreading velocity and the availability of magmatic melts. At one of the melt‐poorest and slowest‐spreading ridges, a special form of large‐scale tectonic faults, so‐called flip‐flop detachments, can be observed. Tectonic faults can act as pathways for fluids circulating through the seafloor, which provides a significant cooling effect for the young plate. The interplay of magmatic activity, faulting and fluid circulation is evident at many different ridges with different magmatic activity and spreading rates. Flip‐flop faulting is restricted to only a few ridge sections worldwide, and we here investigate the prerequisites for this special spreading mode. To do so, we set up a computer model of an ultraslow‐spreading mid‐ocean ridge including the effects of sparse magmatism as well as the cooling effect associated with fluid circulation. We find that feedbacks between faulting dynamics, hydrothermal cooling and magmatic activity control the magnitude and spatial location of each individual process. Seafloor and subsurface observations are best explained by calculations with moderate melt input and hydrothermal circulation acting together. Key Points We implemented hydrothermal cooling and magmatic intrusion in a thermo‐mechanical model to explain detachment faulting at ultraslow ridges Stable flip‐flop detachment faulting is observed for setups considering both melt input and hydrothermal heat fluxes at realistic magnitudes Two other faulting modes frequently observed in our model offer potential alternative interpretations for existing seafloor observations