ALBERT

Description: The International Geodynamics and Earth Tide Service (IGETS) was established in 2015 by the International Association of Geodesy (IAG). IGETS continues the activities of the Global Geodynamics Project (GGP, 1997-2015) to provide support to geodetic and geophysical research activities using superconducting gravimeter (SG) data within the context of an international network. The Walferdange Underground Laboratory for Geodynamics (WULG) is located at the middle of a long labyrinth of galleries which originally have been established for the commercial extraction of gypsum. Exceptional temperature and humidity stability, the absence of water and human perturbations, distance from the ocean and easy access, were some of the motivations for initially choosing this site for instrumentation and Earth tide research. Instruments to measure the micro deformations produced by the tidal forces have been developed and tested in the Laboratory for more than 30 years. Ground deformations and earthquakes are or have been recorded continuously by means of spring gravimeters, vertical and horizontal pendulums, long base water tube tiltmeters, vertical and horizontal strain meters, short period and broad band seismometers. Meteorological parameters (temperature, humidity and atmospheric pressure), as well as radon gas emissions, are also continuously monitored in various locations within the mine. In 2000, the Minister of Research of the Grand-Duchy of Luxembourg decided to establish a new International Reference Station for Intercomparisons of Absolute Gravimeters (ISIAG). The instrumentation to support the project includes a superconducting gravimeter OSG-CT040, an absolute gravimeter FG5X-216, and other ancillary equipment necessary to support research. In January 2002, a first superconducting gravimeter was installed. The instrument was then stopped in March 2003 due to an abnormally large instrumental drift. In December 2003, it was replaced by a brand-new gravimeter with the same name and which continuously operates since that date. Absolute gravity measurements have been performed on a regular time base to calibrate the superconducting gravimeter and to estimate its instrumental drift. Since 2003, the WULG hosted three European Comparisons and one International Comparison of Absolute Gravimeters. It was the first international comparison outside the walls of the BIPM (Bureau International des Poids et Mesures) in Sèvres (France) where it had traditionally been organized for 30 years.

Description: Ground motion models (GMM) have been employed in several domains, from traditional seismic hazard and risk analysis to more recent shakemaps and rapid loss assessment. In this framework, eGSIM is a Python package and web application intended to help engineers and seismologist in understanding how different models compare for specific earthquake scenarios and how well they fit to observed ground motion data, producing results as visual plot or tabular data in standard, accessible and convenient formats (CSV, HDF, JSON and several image formats). Based on OpenQuake, a popular open-source Python library for seismic hazard and risk analysis, eGSIM incorporates and makes available in two user-friendly interfaces hundreds of published GMMs implemented and tested in OpenQuake: an online graphical user interface (GUI) accessible at https://egsim.gfz-potsdam.de, ideal for comparisons that can be visualized or downloaded as images, and a web application programming interface (web API), implemented along the lines of popular seismological web services (FDSN), more suited for comparisons that may be automatized in scheduled jobs, or need to be integrated into custom code and further processed in the user's own workflows. By incorporating databases in form of so-called flatfiles (ESM) and regionalizations derived from seismic hazard models (SHARE, ESHM20), eGSIM allows users to seamlessly select data for comparison and models for comparison based on regions of interest. It also features management scripts to smoothly incorporate new flatfiles or regionalizations from future research projects.Moreover, via the generation of flatfile templates based on a custom selection of GMMs, and the possibility to upload user-defined flatfiles, eGSIM facilitates the non-trivial task of compiling data for model comparison, and can be used to analyze ground motions from any data set recorded anywhere in the world, including rapid analysis of earthquake records following large events.

Description: Highlights • Internal diffusion often controls the releases of flame retardants from microplastics. • Fick's law can describe the releases of additive flame retardants from microplastics. • Effects of temperature, plastic matrix, and particle size can be predicted by models. • Weathering of plastic matrix can greatly accelerate the releases of flame retardants. • Low fluxes of flame retardants released from microplastics pose no risk to ecosystem. The widely occurring debris of plastic materials, particularly microplastics, can be an important source of flame retardants, which are one of the main groups of chemicals added in the production of plastics from polymers. This review provides an overview on the use of flame retardants in plastic manufacturing, the kinetics of their releases from microplastics, the factors affecting their releases, and the potential environmental and ecosystem risk of the released flame retardants. The releases of flame retardants from microplastics typically involve three major steps: internal diffusion, mass transfer across the plastic-medium boundary layer, and diffusion in the environmental medium, while the overall mass transfer rate is commonly controlled by diffusion within the plastic matrix. The overall release rates of additive flame retardants from microplastics, which are dependent on the particle's geometry, can often be described by the Fick's Law. The physicochemical properties of flame retardant and plastic matrix, and ambient temperature all affect the release rate, which can be predicted with empirical and semi-empirical models. Weathering of microplastics, which reduces their particle sizes and likely disrupts their polymeric structures, can greatly accelerate the releases of flame retardants. Flame retardants could also be released directly from the microplastics ingested by aquatic organisms and seabirds, with physical and chemical digestion in the bodies significantly enhancing their release rates. Limited by the extremely slow diffusion in plastic matrices, the fluxes of flame retardants released from microplastics are very low, and are unlikely to pose significant risk to the ecosystem in general. More research is needed to characterize the mechanical, chemical, and biological processes that degrade microplastics and accelerate the releases of flame retardants and to model their release kinetics from microplastics, while efforts should also be made to develop environmentally benign flame retardants to ultimately minimize their risk to the environment and ecosystem.

Description: Ongoing discoveries of terrestrial exoplanets and the desire to determine their habitability have created an increasing demand for studies of a wide range of climatic regimes and atmospheric circulations. These studies have, in turn, challenged our understanding of our own planet’s atmospheric dynamics and provided new frameworks with which we can further our understanding of planetary atmospheres. In this work, we use an idealized moist general circulation model in aquaplanet configuration to study the atmospheric circulation of terrestrial planets with high obliquities. With seasonally varying insolation forcing and a shallow slab ocean as a lower boundary, we emphasize seasonal phenomena that might not be captured in simulations with annual mean forcing and that might involve nonlinear behaviors. By progressively increasing obliquity, we explore the response of the large-scale atmospheric circulation to more extreme seasonal cycles and a reversed annual mean equator-to-pole insolation distribution, and its impact on the energy and water cycles. We show that for high obliquities, the large-scale atmospheric circulation and the meridional energy transport are dominated by seasonally reversing broad cross-equatorial Hadley cells that transport energy from the summer to the winter hemisphere and significantly mitigate temperature extremes. These overturning cells also play a major role in shaping the planet’s hydrological cycle, with the associated ascending branches and precipitation convergence zones becoming progressively broader and more poleward shifted into the summer hemisphere with higher obliquities. While not embedded within the Hadley cell ascending branches, the hot summer poles of high obliquity planets experience nonnegligible precipitation during and at the end of the warm season: during the summer, lower-level moist static energy maxima at the summer poles force locally enhanced convective activity. As temperatures rapidly drop at the end of the summer and convective activity decreases, the water-holding capacity of the atmosphere decreases and water vapor stored in the atmospheric column rapidly condenses out, extending the duration of the summer pole rainy season into the corresponding autumn. Our study reveals novel understanding of how atmospheric dynamics might influence a planet’s overall climate and its variability.

Description: The analysis of three extreme African dust outbreaks over the Iberian Peninsula (IP) shows that a double Rossby wave breaking (RWB) process in the polar jet (PJ) creates the conditions for dust storm formation over subtropical deserts in North Africa and the restructuring of upper-level air flows critical for the dust transport poleward after ablation. Two consecutive anticyclonic RWBs initiate over the IP and the adjacent Atlantic, the first commencing 10 days before dust reaches the IP and the second three to five days later. The first RWB becomes quasi-stationary over the eastern Mediterranean when the second RWB develops. In turn, the first RWB blocks downstream propagation of the second, which is amplified by energy reflection poleward from the first break causing vortex intensification and equatorward propagation over the Atlas as well as a strengthening and coupling of the subtropical jet (STJ) to circulations in the ITCZ. Zonal flows are blocked and sustained low-level northeasterlies/easterlies are induced across northwest Africa. The three events present substantial differences in the location and geometry of key upper- and low-level subsynoptic features that organize the dust storms over the Sahara following the second break. Dust lifted by either the cold outflow from convective downdrafts or by orographic gravity waves interacts with terrain-induced and larger scale circulations and is transported to the IP. The location of the cyclonic large scale signal from the second RWB to the west or over the Atlas and the blocking of zonal flows are key for the poleward dust transport.

Description: Aqueous sorption processes play an important role in, for example, pollutant binding to natural nanoparticles, colloid stability, separation and enrichment of components and remediation processes. In this article, which is a tribute to Hans Lyklema, models of localized (ad)sorption of molecules and ions from aqueous solution on homogeneous and heterogeneous nanoparticles are presented. The discussed models range from ideal monocomponent sorption on homogeneous (Langmuir) and heterogeneous sites, to multicomponent ideal sorption on homogeneous and heterogeneous sites, multicomponent multisite ion complexation with charge distribution (CD-MUSIC) and non-ideal competitive adsorption on heterogeneous sites (NICA). Attention is also paid to lateral interaction, site-induced aggregation, binding stoichiometry and multilayer formation. Electrical double layer models are discussed in relation to ion binding on impermeable and permeable nanoparticles. Insight in models that can describe sorption of molecules and ions on nanoparticles leads to awareness of the limitations of using simple models for complex systems and is needed for the selection and application of an appropriate model for a given system. This is relevant for all practical sorption processes and for a better understanding of the role of natural nanoparticles in the binding of nutrients and pollutants.

Description: These are the first animals to pass mutations found outside sex cells

Description: The total cultivable microbiota of the ice-stored European sea bass (Dicentrarchus labrax), the most important commercial fish species of the Mediterranean aquaculture, was determined using 16S rRNA gene sequence analysis. High Resolution Melting (HRM) curve profiles and sequencing analysis (V3–V4 region of the 16S rRNA gene) were used respectively for the differentiation and identification of the collected isolates from six time intervals (day 0, 4, 8, 12, 14 and 16) while fish were stored in ice. HRM analysis differentiated the unknown microbiota in ten groups (208 isolates) and in two single isolates based on their HRM curve profiles. The isolates with HRM profiles which were 〉91% similar within each group were found to belong to the same species using sequencing analysis. Thus, the ten groups consist of representatives of Psychrobacter glacincola, Ps. alimentarius, Ps. cryohalolentis, Ps. maritimus, Ps. fozii, Pseudomonas sp., Paeniglutamicibacter sp., Carnobacterium sp., Leucobacter aridicolis and Bacillus thuringiensis. Based on this approach, Ps. cryohalolentis was found to be the most dominant phylotype at the beginning of fish shelf-life compared to other species. The abundance of this bacterium decreased throughout storage, while Ps. glacincola increased and dominated at the time of the sensory minimum acceptability (day 14) and rejection (day 16). To conclude, HRM could be used for the rapid determination of sea bass microbiota, using the representatives of each group as reference bacterial strains, in order for scientists to solve rapidly stakeholders problems related with microbial quality or safety of fish.