ALBERT

Description: Bioleaching is the mobilization of metal cations from insoluble ores by microorganisms. Biofilms can enhance this process. Since Sulfobacillus often appears in leaching heaps or reactors, this genus has aroused attention. In this study, biofilm formation and subsequent pyrite dissolution by the Gram-positive, moderately thermophilic acidophile Sulfobacillus thermosulfidooxidans were investigated. Five strategies, including adjusting initial pH, supplementing an extra energy source or ferric ions, as well as exchanging exhausted medium with fresh medium, were tested for enhancement of its biofilm formation. The results show that regularly exchanging exhausted medium leads to a continuous biofilm development on pyrite. By this way, multiply layered biofilms were observed on pyrite slices, while only monolayer biofilms were visible on pyrite grains. In addition, biofilms were proven to be responsible for pyrite leaching in the early stages.

Description: The objective of this study was to assess the performance of the simulated start of the photosynthetically active season by a large-scale biosphere model in boreal forests in Finland with remote sensing observations. The start of season for two forest types, evergreen needle- and deciduous broad-leaf, was obtained for the period 2003–2011 from regional JSBACH (Jena Scheme for Biosphere–Atmosphere Hamburg) runs, driven with climate variables from a regional climate model. The satellite-derived start of season was determined from daily Moderate Resolution Imaging Spectrometer (MODIS) time series of Fractional Snow Cover and the Normalized Difference Water Index by applying methods that were targeted to the two forest types. The accuracy of the satellite-derived start of season in deciduous forest was assessed with bud break observations of birch and a root mean square error of seven days was obtained. The evaluation of JSBACH modelled start of season dates with satellite observations revealed high spatial correspondence. The bias was less than five days for both forest types but showed regional differences that need further consideration. The agreement with satellite observations was slightly better for the evergreen than for the deciduous forest. Nonetheless, comparison with gross primary production (GPP) determined from CO2 flux measurements at two eddy covariance sites in evergreen forest revealed that the JSBACH-simulated GPP was higher in early spring and led to too-early simulated start of season dates. Photosynthetic activity recovers differently in evergreen and deciduous forests. While for the deciduous forest calibration of phenology alone could improve the performance of JSBACH, for the evergreen forest, changes such as seasonality of temperature response, would need to be introduced to the photosynthetic capacity to improve the temporal development of gross primary production.

Description: An innovative remote sensing approach that combines land-use change and water quality information is proposed in order to investigate if Artisanal and Small-scale Gold Mining (ASGM) area extension is associated with water siltation in the Tapajós River Basin (Brazil), containing the largest small-scale gold mining district in the world. Taking advantage of a 40-year period of the multi-satellite imagery archive, the objective of this paper is to build a normalized time-series in order to evaluate the influence of temporal mining expansion on the water siltation data (TSS, Total Suspended Solids concentration) derived from previous research. The methodological approach was set to deliver a full characterization of the ASGM expansion from its initial stages in the early 1970s to the present. First, based on IRS/LISSIII images acquired in 2012, the historical Landsat image database (1973–2001) was corrected for radiometric and atmospheric effects using dark vegetation as reference to create a normalized time-series. Next, a complete update of the mining areas distribution in 2012 derived from the TerraClass Project (an official land-use classification for the Brazilian Amazon) was conducted having IRS/LISSIII as the base map with the support of auxiliary data and vector editing. Once the ASGM in 2012 was quantified (261.7 km2) and validated with photos, a reverse classification of ASGM in 2001 (171.7 km2), 1993 (166.3 km2), 1984 (47.5 km2), and 1973 (15.4 km2) with the use of Landsat archives was applied. This procedure relies on the assumption that ASGM changes in the land cover are severe and remain detectable from satellite sensors for decades. The mining expansion area over time was then combined with the (TSS) data retrieved from the same atmospherically corrected satellite imagery based on the literature. In terms of gold mining expansion and water siltation effects, four main periods of ASGM activities were identified in the study area: (i) 1958–1977, first occurrence of mining activities and low water impacts; (ii) 1978–1993, introduction of low-budget mechanization associated with very high gold prices resulting in large mining area expansion and high water siltation levels; (iii) 1994–2003, general recession of ASGM activities and exhaustion of easy-access gold deposits, resulting in decreased TSS; (iv) 2004 to present, intensification of ASGM encouraged by high gold prices, resulting in an increase of TSS.

Description: Current earth observation models do not take into account the influence of water salinity on the evaporation rate, even though the salinity influences the evaporation rate by affecting the density and latent heat of vaporization. In this paper, we adapt the SEBS (Surface Energy Balance System) model for large water bodies and add the effect of water salinity to the evaporation rate. Firstly, SEBS is modified for fresh-water whereby new parameterizations of the water heat flux and sensible heat flux are suggested. This is achieved by adapting the roughness heights for momentum and heat transfer. Secondly, a salinity correction factor is integrated into the adapted model. Eddy covariance measurements over Lake IJsselmeer (The Netherlands) are carried out and used to estimate the roughness heights for momentum (~0.0002 m) and heat transfer (~0.0001 m). Application of these values over the Victoria and Tana lakes (freshwater) in Africa showed that the calculated latent heat fluxes agree well with the measurements. The root mean-square of relative-errors (rRMSE) is about 4.1% for Lake Victoria and 4.7%, for Lake Tana. Verification with ECMWF data showed that the salinity reduced the evaporation at varying levels by up to 27% in the Great Salt Lake and by 1% for open ocean. Our results show the importance of salinity to the evaporation rate and the suitability of the adapted-SEBS model (AquaSEBS) for fresh and saline waters.

Description: Area-based analyses of airborne laser scanning (ALS) data are an established approach to obtain wall-to-wall predictions of forest characteristics for vast areas. The analyses of sparse data in particular are based on the height value distributions, which do not produce optimal information on the horizontal forest structure. We evaluated the complementary potential of features quantifying the textural variation of ALS-based canopy height models (CHMs) for both supervised (linear regression) and unsupervised (k-Means clustering) analyses. Based on a comprehensive literature review, we identified a total of four texture analysis methods that produced rotation-invariant features of different order and scale. The CHMs and the textural features were derived from practical sparse-density, leaf-off ALS data originally acquired for ground elevation modeling. The features were extracted from a circular window of 254 m2 and related with boreal forest characteristics observed from altogether 155 field sample plots. Features based on gray-level histograms, distribution of forest patches, and gray-level co-occurrence matrices were related with plot volume, basal area, and mean diameter with coefficients of determination (R2) of up to 0.63–0.70, whereas features that measured the uniformity of local binary patterns of the CHMs performed poorer. Overall, the textural features compared favorably with benchmark features based on the point data, indicating that the textural features contain additional information useful for the prediction of forest characteristics. Due to the developed processing routines for raster data, the CHM features may potentially be extracted with a lower computational burden, which promotes their use for applications such as pre-stratification or guiding the field plot sampling based solely on ALS data.

Description: Various themed streets have recently been developed by local governments in order to stimulate local economies and to establish the identity of the corresponding places. However, the motivations behind the development of some of these themed street projects has been based on profit, without full considerations of people’s perceptions of their local areas, resulting in marginal effects on the local economies concerned. In response to this issue, this study proposed a themed street clustering method to detect the themed streets of a specific region, focusing on the commercial themed street, which is more prevalent than other types of themed streets using location based service data. This study especially uses “the street segment” as a basic unit for analysis. The Sillim and Gangnam areas of Seoul, South Korea were chosen for the evaluation of the adequacy of the proposed method. By comparing trade areas that were sourced from a market analysis report by a reliable agent with the themed streets detected in this study, the experiment results showed high proficiency of the proposed method.

Description: Delimitating trade areas is a major business concern. Today, mobile communication technologies make it possible to use social media data for this purpose. Few studies however, have focused on methods to extract suitable samples from social media data for trade area delimitation. In our case study, we divided Beijing into regular grid cells and extracted activity centers for each social media user. Ten sample sets were obtained by selecting users based on the retail agglomerations they visited and aggregating user activity centers to each grid cell. We calculated distance and visitation frequency attributes for each user and each grid cell. The distance value of a grid cell is the average distance of user activity centers in this grid cell to a retail agglomeration. The visitation frequency of a grid cell refers to the average count of visits to retail agglomerations by user activity centers for a cell. The calculated attribute values of 10 sets were input into a Huff model and the delimitated trade areas were evaluated. Results show that sets obtained by aggregating user activity centers have a better delimitating effect than sets obtained without aggregation. Differences in the distribution and intensity of trade areas also became apparent.

Description: Road information is fundamental not only in the military field but also common daily living. Automatic road extraction from a remote sensing images can provide references for city planning as well as transportation database and map updating. However, owing to the spectral similarity between roads and impervious structures, the current methods solely using spectral characteristics are often ineffective. By contrast, the detailed information discernible from the high-resolution aerial images enables road extraction with spatial texture features. In this study, a knowledge-based method is established and proposed; this method incorporates the spatial texture feature into urban road extraction. The spatial texture feature is initially extracted by the local Moran’s I, and the derived texture is added to the spectral bands of image for image segmentation. Subsequently, features like brightness, standard deviation, rectangularity, aspect ratio, and area are selected to form the hypothesis and verification model based on road knowledge. Finally, roads are extracted by applying the hypothesis and verification model and are post-processed based on the mathematical morphology. The newly proposed method is evaluated by conducting two experiments. Results show that the completeness, correctness, and quality of the results could reach approximately 94%, 90% and 86% respectively, indicating that the proposed method is effective for urban road extraction.

Description: Effectively identifying an airport from satellite and aerial imagery is a challenging task. Traditional methods mainly focus on the use of multiple features for the detection of runways and some also adapt knowledge of airports, but the results are unsatisfactory and the usage limited. A new method is proposed to recognize airports from high-resolution optical images. This method involves the analysis of the saliency distribution and the use of fuzzy rule-based classification. First, a number of images with and without airports are segmented into multiple scales to obtain a saliency distribution map that best highlights the saliency distinction between airports and other objects. Then, on the basis of the segmentation result and the structural information of airports, we analyze the segmentation result to extract and represent the semantic information of each image via the bag-of-visual-words (BOVW) model. The image correlation degree is combined with the BOVW model and fractal dimension calculation to make a more complete description of the airports and to carry out preliminary classification. Finally, the support vector machine (SVM) is adopted for detailed classification to classify the remaining imagery. The experiment shows that the proposed method achieves a precision of 89.47% and a recall of 90.67% and performs better than other state of the art methods on precision and recall.

Description: Inland saline wetlands are complex systems undergoing continuous changes in moisture and salinity and are especially vulnerable to human pressures. Remote sensing is helpful to identify vegetation change in semi-arid wetlands and to assess wetland degradation. Remote sensing-based monitoring requires identification of the spectral characteristics of soils and vegetation and their correspondence with the vegetation cover and soil conditions. We studied the spectral characteristics of soils and vegetation of saline wetlands in Monegros, NE Spain, through field and satellite images. Radiometric and complementary field measurements in two field surveys in 2007 and 2008 were collected in selected sites deemed as representative of different soil moisture, soil color, type of vegetation, and density. Despite the high local variability, we identified good relationships between field spectral data and Quickbird images. A methodology was established for mapping the fraction of vegetation cover in Monegros and other semi-arid areas. Estimating vegetation cover in arid wetlands is conditioned by the soil background and by the occurrence of dry and senescent vegetation accompanying the green component of perennial salt-tolerant plants. Normalized Difference Vegetation Index (NDVI) was appropriate to map the distribution of the vegetation cover if the green and yellow-green parts of the plants are considered.