ALBERT

Notes: Abstract The effects of Tertiary Alpine metamorphism on pelitic Mesozoic cover rocks have been studied along a cross-section in the central Lepontine Alps in the Nufenen Pass area, Switzerland.Greenschist facies to amphibolite facies conditions are indicated by the formation of the index minerals chloritoid, garnet, staurolite and kyanite in pelitic rocks. Regional metamorphism reached maximum conditions during the interkinematic period between a main Alpine penetrative (D2) and a late Alpine (D3) crenulation type deformation phase or synchronous with the late Alpine deformation. Based on AFM phase relationships four different metamorphic zones can be distinguished: (1) chloritoid zone; (2) staurolite + chlorite zone; (3) staurolite + biotite zone; and, (4) kyanite zone.The isograds that separate these zones can be modelled by univariant reactions in the KFMASH system. The conditions of metamorphism calculated from geological ther-mobarometers for the maximum post-D2 por-phyroblast stage are from North to South: 500° C at 5-6 kbar and 600° C at 7-8 kbar.Detailed thermobarometry of garnet por-phyroblasts with complex textures suggests that maximum temperature was reached later than maximum pressure. Early garnet growth occurred along a prograde P-T-path, post-D2 rims grew with increasing temperature but decreasing pressure, and finally post-D3 garnet formed along a retrograde P-T-path.It may be concluded from the calculated pressure and temperature difference over a short distance (3 km) across the mapped area that the isogradic surfaces of the post-D2 metamorphism are steeply oriented. The data also suggest that isobaric and isothermal surfaces are parallel.Much of the observed metamorphic pattern can be explained as the result of a significant post-D2 differential uplift of the hot Pennine area relative to the Helvetic area along a tectonic contact zone. The closely spaced isograds (isotherms) in the North may then be interpreted as a thermal effect owing to the emplacement of the hot Pennine rocks against the Got-thard massif with its cover. Whereas, in the Pennine metasediments, post-D2 porphyroblast formation can be related to the decompression path which was steep enough for dehydration reactions to proceed. It is also remarkable that late kyanite porphyroblasts probably formed with decreasing pressure.The interpretation given here for the Nufenen Pass area may also apply to the Luk-manier Pass area where similar metamorphic patterns have been reported by Fox (1975). The formation of the ‘Northern Steep Belt’;, as denned by Milnes (1974b), and the associated late Alpine fold zones may, therefore, have significantly modified the metamorphic pattern of the Helvetic-Penninic contact zone.

Notes: Abstract Porphyroblast textures in a Karakorum phyllite reveal that porphyroblast growth was syn-tectonic with respect to a cleavage forming deformation. During and after porphyroblast growth it partitions the deformation such that zones of intensified cleavage are developed which wrap around the porphyroblast whilst the porphyroblast and its strain shadow undergo little deformation. Porphyroblast strain shadows comprise quartz, calcite and felspar with little mica, and are probably formed by solution transfer during deformation. Unless the deformation is so strongly partitioned that no deformation of the porphyroblasts and their immediate surrounds occurs, inequidimensional porphyroblasts will rotate. Porphyroblasts undergo some dissolution after they have finished growing.

Notes: Abstract New isotopic (Rb–Sr, U–Pb zircon and Sm–Nd) and petrological data are presented for part of an extensive Proterozoic mobile belt (locally known as the Rayner Complex) in East Antarctica. Much of the belt is the product of Mid-Proterozoic (∼ 1800–2000 Ma) juvenile crustal formation. Melting of this crust at about 1500 Ma ago produced the felsic magmas from which the dominant orthogneisses of this terrain were subsequently derived. Deformation and transitional granulite-amphibolite facies conditions (which peaked at 750 ± 50°C and 7–8 kbar (0.7–0.8 GPa) produced open to tight folding about E–W axes and syn-tectonic granitoids about 960 Ma ago. Subsequent felsic magmatism occurred at about 770 Ma and not, as has been widely advocated, at 500–550 Ma, which appears to have been a time of widespread upper greenschist facies (400–500°C) metamorphism, localized shearing and faulting.Sm-Nd model ages of 1.65–2.18 Ga disprove a previously favoured hypothesis that the Rayner Complex mostly represents reworked Archaean rocks from the neighbouring craton (Napier Complex). Models that involve rehydration of the Napier Complex are no longer required, since the Rayner Complex was its own source of water. Two episodes of Proterozoic crustal growth are identified, the later of which occurred between about 1200 Ma and 1000 Ma, and was relatively minor. Sedimentation took place only shortly before Late Proterozoic orogenesis.The multiphase history of the Rayner Complex has resulted in complex isotopic behaviour. Three temporally discrete episodes of Pb loss from zircon have been identified, the earliest two of which are responses to the c. 960 Ma and 540 Ma tectonothermal events. Fluid leaching was operative during the later event for there is a good correlation between degree of isotopic discordance and secondary mineral growth. Pb loss during the high-grade event was probably governed by the same process or by lattice annealing. Some zircon suites also document recent Pb loss. Most lower concordia intercepts have no direct geological meaning and are explicable as mixed ages produced by incomplete Pb loss during two or more secondary events. Whereas all zircon separates from the orthogneisses produce U–Pb isotopic alignments, zircons from the only analysed paragneiss produce scattered data, in part reflecting a range of provenance. The 960 Ma event was also associated with the growth of a characteristically low U zircon (∼ 300 μg/g) in rocks of inferred high Zr content.There is ubiquitous evidence for the resetting of Rb–Sr total-rock isochrons. Even samples separated by up to 10 km fail to produce igneous crystallization ages. Minor mineralogical changes produced by the 540 Ma upper greenschist-facies metamorphism were sufficient to almost completely reset some Rb–Sr isochrons and to produce open system conditions on outcrop scale, at least in one location.

Notes: Abstract The preserved array of pressures in the eastern Dalradian indicates that considerable syn- to post-metamorphic differential uplift has occurred. This inferred differential uplift suggests that Buchan sillimanite zone rocks originally lay at higher structural levels than presently adjacent cooler kyanite zone rocks to the west. A number of features are believed to coincide with the western margin of the sillimanite zone. These are a maximum in temperature, sharp thermal features, a high strain zone, and a train of metabasites. These features are explained by invoking syn-metamorphic movement between the Buchan sillimanite zone and the kyanite zone to its west, involving some horizontal component of movement. It is suggested that the lateral, now eroded, equivalents of the Buchan area once provided part of the required tectonic thickening for other parts of the Dalradian. Areas surrounding the Buchan area suffered tectonic burial followed by metamorphism during uplift relative to the Buchan area.

Notes: Abstract Existing geochronological data are reviewed and new Rb-Sr, K-Ar and 39Ar–40Ar ages are presented, including a suite of 33 mica ages from a 20 km north–south tunnel section. These data are discussed in relation to the thermal history from the overthrusting of the Autroalpine nappes c. 65 Myr ago to the present. The earliest phase of metamorphism, involving lawsonite crystallization, is associated with emplacement of these nappes. Subsequently, temperatures in the rocks beneath rose, at a mean rate of 3–6°C/Myr, until the climax of metamorphism.At high structural levels, published data indicate an age 〉 35 Myr for the metamorphic climax. In contrast, a new 39Ar–40Ar step-heating age of 23.8 ± 0.8 Myr on amphibole, from near the base of Peripheral Schieferhülle, closely approximates the age of metamorphism and provides the first clear indication that the climax of metamorphism occurred later at deeper structure levels. Following the climax, near-isothermal uplift and erosion reduced pressure to c. 1 kbar before white mica closure at 19 Myr; this implies uplift at 〉3 mm/yr.Along the tunnel section, white mica K-Ar ages vary systematically from 24 Myr to 16.5 Myr with position relative to a late 4 km amplitude dome whereas biotite Rb-Sr ages are uniform at 16.5 Myr across the whole profile; doming is thus dated at 16.5 Myr with transient uplift rates 〉5 mm/yr. At other times uplift rates were 〈1 mm/yr.

Notes: Abstract Granulites at Fyfe Hills in Enderby Land, Antarctica, crystallized at temperatures in excess of 850°C, and possibly as high as 1000°C, and at pressures of 8-10kbar during the mid to late Archaean. A number of features, including repeated retrograde metamorphism at 5.5-8kbar, retrograde reaction textures, and rimward zoning in pressure sensitive systems, suggest that following peak metamorphism the granulites stabilized at a depth of 18-26 km. After stabilization, the granulites cooled near-isobarically to temperatures of 600-700°C. Assuming a total crustal thickness of 35-40 km during this late Archaean interval of isobaric cooling, the peak metamorphic crustal thickness is estimated at 35-56 km. This estimate is significantly less than the 60-70 km obtained by summing the depths of the present levels of exposure (26-34 km) and the thickness of the crust presently beneath Fyfe Hills (approxi-mately 35km) and is, therefore, consistent with independent evidence for extensive post-Archaean thickening of the Enderby Land crust.

Notes: Abstract A Hercynian charnockite occurs within high-grade gneisses in the Agly Massif, French Pyrenees. Its thermal history has been evaluated using the Fe-Mg distribution coefticient (KD) between garnet and biotite. These minerals have different origins but similar compositions in the charnockites and host gneisses. In the charnockite, the Bi–Ga pairs are the retrograde products of Opx alteration. This Opx reaction with feldspar can be written. Opx + PI + Fluid 1(H2O + Al + K + Fe + Ti) = Bi + Ga + Q + Fluid 2(H2O + Na). The garnets are relatively Ca poor (4–2.5% grossular); they are automorphic and zoned in the gneisses and poikiloblastic in the charnockites. Both types show a retrograde rim (of few hundred microns’width) across which Fe and Mn increase as Mg decreases. The biotites show a good correlation between the octahedral cations (Ti4++ Fe2+) and (Mg2++ Al3+VI); Ti and Fe both increase, whereas Mg and AlVI decrease. There is an inverse linear correlation between Fe2+ and Mg2+ and the Fe/Mg ratio increases as Ti increases. The relation between Ti and KGa-BiDFe-Mg is less clear: it seems that KD slightly decreases as Ti increases. The equilibration temperatures of Ga–Bi pairs are discussed: the charnockite Ga-Bi pairs have equilibrated between 550°C and 600°C; whereas those of the gneisses have equilibrated between 550°C and 650°C. Two main thermal steps appear: one in the gneisses between 600-650°C and a second one in both the gneisses and the charnockites between 550°C and 600°C.

Notes: Abstract The Cretaceous-Eocene basic to intermediate marine volcanic rocks of the Mucuchi Formation constitute the Western Cordillera in northern Ecuador. Their chemical features mostly correspond to those of tholeiitic basalts with some calc-alkaline affinities and suggest an oceanic island arc setting. The Macuchi rocks are affected by low-grade, non-deformative metamorphism, characterized by zeolite, prehnite-pumpellyite and lower greenschist facies assemblages. Depth-zonation is suggested by the downward mineral sequence: (i) laumontite+ (pistacitic epidote, pumpellyite + prehnite); (ii) pumpellyite+ prehnite + pistacitic epidote; (iii) actinolite+biotite+ pistacitic epidote + chlorite. This broad zonation and the chemistry of individual minerals point to an interaction between the volcanic rocks and sea-water under a moderate to high thermal gradient (= 75° C/km?). Alteration appears to have been dependent primarily on fluid control (volume, pressure, composition), temperature and reaction kinetics which together partly overshadow the role of load-pressure. Compositional variations of a mineral species at the scale of a contiguous flow or even at the scale of a thin section show that intensity of alteration was spatially uneven depending on rock permeability and consequently, metastable equilibrium commonly exists. However, a progressive approximation to equilibrium as a result of P–T control is shown by the mineralogy. A high fo2 of the fluid phase is evident from the mineral chemistry. The metamorphism of the Macuchi volcanics is similar to the hydrothermal-burial type produced during the development of a volcanic arc where lavas and volcanoclastics accumulated in a shallow marine environment. However, some of its characteristics point to a transition toward systems defined by a higher T/P ratio such as those found in ocean-floor metamorphism.A model is proposed in which the Macuchi volcanics are assigned to an oceanic island arc generated contemporaneously with a marginal basin which has opened as the outcome of progressive north-south attenuation of the continental crust due to mantle diapirism.

Notes: Abstract Several small bodies of metabasite (maximum dimensions of 1000 m x 500 m) are included in the metamorphic rocks of the Nevado-Filabride Complex in the Betic Cordilleras (Almeria Region). The body of 400 m x 100 m, located 200 m due west of the Lubrin village, contains troctolitic gabbro with well-preserved igneous textures and mineral compositions, wholly amphibolitized gabbro, garnet-bearing metagabbro eclogite. Along with the textural and mineral changes, sensible and regular geochemical variations can be observed, where the content of MgO decreases from 24% to 11%, while that of CaO and Na2O increases from 7% to 11% and from 2% to 3%, respectively. In addition, the content of some minor elements such as Sr, Y, Nb, Zr and Sc increases while that of Ni and Cr decreases from troctolitic gabbro to the eclogite. The amphibolitized gabbro shows values scattered around those of the troctolitic gabbro. These geochemical variations are ascribed to inherited differences in the pre-metamorphic protolith, i.e. a fractionated gabbro which varies from olivine-rich to clinopyroxene-rich gabbro. Nevertheless, some metasomatism affected the Lubrin body without changing the main chemical trends, as documented by the significantly different 87Sr/86Sr ratios of each rock-type. This points to a metasomatism which involved the introduction of crustal radiogenic strontium. The petrographical and mineral chemical features are interpreted to be the result of syn-metamorphic fluid circulation possibly combined with deformation by shearing. The igneous texture and mineral chemistry have been retained wherever both fluid circulation and shearing were ineffective. On the contrary, where both events were effective, the formation of eclogite occurred. Later, the entire body underwent a retrogressive amphi-bolitic stage under greenschist facies conditions, which was probably responsible for the formation of the amphibolitized gabbro portion and for the retrogression of the eclogite.

Notes: Abstract Scapolite, wollastonite, calcite, diopside, grossular-andradite garnet and sphene occur in calc-silicate rocks in the granulite terrain of the Arunta Block, central Australia. This assemblage buffers the CO2 activity at a low value, so that any coexisting fluid phase must be H2O rich and CO2 poor (Xco2= 0.2-0.3). In contrast, the H2O activity in the surrounding felsic and mafic granulites was low. Thus fluid activities during granulite facies metamorphism were locally buffered in various rock units and fluid flow appears to have been restricted or fluid may have been absent. Late retrograde rims of garnet and garnet-quartz separate phases formed in the high-grade stage. Formation of these rims would have required either an influx of water-rich fluid or a decrease in pressure. Evidence from the surrounding granulites shows that in one locality, the calc-silicate rocks had undergone late isobaric hydration; in another locality, minor uplift had occurred soon after peak P-T conditions. In both, scapolite had partly broken down to plagioclase-calite. A calc silicate rock from the granulite terrain of Enderby Land, Antarctica, contains scapolite, wollastonite, calcite, diopside, quartz and sphene; this assemblage also indicates low CO2 activities. In this rock, wollastonite has broken down to calcite-quartz, to indicate isobaric cooling without influx of hydrous fluid.

Notes: Abstract Chloritoid-bearing metasedimentary rocks occur in close proximity to blueschists and eclogites in the Tertiary high-pressure metamorphic belt of northern New Caledonia. The typical assemblage of chloritoid-bearing rocks in the epidote zone is quartzchlorite-muscovite-garnet-chloritoid. In the omphacite zone, epidote is an additional member of the chloritoid-bearing assemblage. Paragonite is rare, plagioclase was not detected, and rutile and ilmenite are the Fe-Ti oxide phases. Chloritoid-glaucophane is not a common assemblage. Chloritoid-bearing rocks have relatively low (Ca+K+Na)/Al ratios and the chloritoids are relatively Mg-rich with Mg/ (Mg+Fe) up to about 0.4. A comparison of the mineral assemblages and mineral chemistry with experimental and computed phase equilibria suggest an upper temperature limit near 560° C in the omphacite zone and a minimum temperature limit near 450° C at 10 kbar. An empirical garnet-chlorite Fe-Mg exchange thermometer does not yield consistent results for the higher-grade rocks, suggesting Ts ranging from 390 to 535° C in the omphacite zone and 420–465° C in the epidote zone. The distribution coefficient KD= (Fe/Mg)ctd/(Fe/Mg)chl for chloritoid and chlorite ranges from 3.9 to 6.4, values which are lower than those (=10) from lower greenschist facies rocks, but are near those of upper greenschist facies and albite-epidote amphibolite facies.

Notes: Abstract Considering the minerals cordierite (Cd), sapphirine (Sa), hypersthene (Hy), garnet (Ga), spinel (Sp), sillimanite (Si) and corundum (Co) in the system FeO-MgO-Al2O3-SiO2 (FMAS), the stable invariant points are [Co], [Ga], [Cd] and [Sa]. Constraints imposed by experimental data for the system MAS indicate that under low PH2o conditions the invariant points occur at high temperature (〉 900° C) and intermediate pressure (7-10 kbar). This temperature is higher than that commonly advocated for granulite facies metamorphism. In granulites Fe-Mg exchange geothermometers may yield temperatures of 100–150° C below peak metamorphic conditions and evidence for peak temperatures is best preserved by relict high-temperature assemblages and by Al-rich cores in orthopyroxene. Application of the FMAS grid to some well-documented granulite occurrences introduces important constraints on their P-T histories. Rocks of different bulk compositions, occurring in close proximity in the field, may record distinct segments of their P-T paths. This applies particularly to rocks with evidence for reaction in the form of coronas, symplectites and zoned minerals. Consideration of curved reaction boundaries and XMs isopleths may explain apparently contradictory results for the stability of cordierite obtained from low-temperature experiments and thermochemical calculations on the one hand and hightemperature experimental data on the other.

Notes: Abstract The Bergen-Jotun kindred rocks of this study, the Storådalen Complex (SCX), Svartdalen Gneiss (SG) and Mjølkedøla Purple Gabbro (MPG), have been shown to be a co-magmatic series with calc-alkaline affinities. The analyses of Ba, Nb, Y, and Zr presented here show no variation in these elements between the three rock units and are consistent with the calc-alkaline character of the rocks. The lithophile elements Ba, K, and Sr are enriched relative to MORB and the high field strength elements Nb, Y, and Zr are depleted relative to MORB, Zr especially so.The SCX contains rocks with low (〉30) differentiation indices which are interpreted as plagioclase + pyroxene ± olivine ± amphibole cumulates. The remainder of the SCX, together with the MPG and SG, is regarded as the congealed liquid in equilibrium with these cumulates. The distribution of trace elements between these two components of the SCX can be adequately modelled using a Rayleigh fractionation process, measured ‘liquid’compositions, and calculated bulk distribution coefficients. It is thus concluded that the trace element geochemistry of the rocks of this study is consistent with subduction-related, mantle-derived magmas that fractionate within a continental or mature island arc environment. Subsequent high-grade metamorphism and deformation of Sveconorwegian age have been essentially isochemical.

Notes: Abstract High-pressure granulite-facies gneisses in the NE Ox inlier in NW Ireland have undergone extensive Caledonian retrogression. In the local area of Slishwood, however, reworking was negligible and the gneisses (psammites, semipelites, pelites, metabasites and ultramafites) preserve evidence of P–T changes at high grade which mainly post-date pre-Caledonian polyphase deformation. Temperatures reached 850–900°C (based on garnet-clinopyroxene geothermometry and the presence of mesoperthite) during and after decompression from earlier eclogite-facies conditions (inferred from textural evidence of plagioclase release in sieve-textured augite). Subsequent cooling at high pressure is inferred from the unequivocal replacement of sillimanite by kyanite.A Sm–Nd mineral isochron (gt–cpx–plag–WR) of 605 ± 37 Ma is taken to date a point on the cooling path, and confirms the hitherto suspected pre-Caledonian age of the high-grade metamorphism. Geochemical and Sm–Nd isotopic data indicate that the protoliths were probably late Proterozoic arkosic sediments and tholeiites. Following metamorphism they apparently came to reside near the base of the crust where they slowly cooled. The eventual exhumation of these gneisses is attributed to Caledonian crustal imbrication, followed by rapid isostatic recovery.

Notes: Abstract Sphalerite geobarometry has long been known to give poor results when applied to regional metamorphic terranes. Application of the sphalerite geobarometer to three low-to medium-grade sulphide deposits—the Moke Creek and Waitahuna deposits, Otago, and the Goose Cove deposit, Newfoundland—yields pressures up to 9 kbar, which appear to be too high when compared with other geological data. Textural and mineralogical relationships suggest that the Goose Cove and, possibly, the Moke Creek deposits lacked the required equilibrium assemblage (pyrite + hexagonal pyrrhotite + sphalerite) during peak metamorphic conditions, rendering the geobarometer inapplicable. In addition, all three deposits show evidence of re-equilibration at T 〈 300°C, which has resulted in decreased FeS contents and high apparent pressures. Analyses of sphalerites from very low-grade metachert from South Georgia Island, which contains the assemblage sphalerite + pyrite + monoclinic pyrrhotite + chalcopyrite, confirm that low-temperature equilibration of this assemblage results in approximately 10–11 mol. % FeS in sphalerite. Comparison of these results with published descriptions of other deposits suggests that lack of the appropriate assemblage and retrograde re-equilibration of sphalerite probably account for most anomalously high-pressure estimates. Erratic compositions of sphalerites containing chalcopyrite inclusions may result from replacement of high-temperature intermediate solid-solution by chalcopyrite during cooling. Strain may enhance retrograde re-equilibration of sphalerite by grain-size reduction or dislocation-assisted diffusion and/or nucleation. Re-evaluation of the data from Moke Creek suggests that the sulphides experienced pervasive greenschist facies re-equilibration at pressures of about 4.5 kbar, with late stage mobilization at about 2.8 kbar, and thus sphalerite compositions are not likely to reflect blueschist facies conditions. Pressure estimates based on sphalerite geobarometry should take into account at what stage in the history of a metamorphic terrane the sphalerite composition equilibrated.

Notes: Abstract Whole-rock and mineral analyses of polydeformed mica-schist, quartzite, marble and amphibolite are presented from Signy Island, South Orkney Islands, part of the Scotia metamorphic complex. Whole-rock chemistry suggests that the amphibolites are the metamorphosed equivalent of enriched tholeiitic and alkali basalts of an oceanic intraplate basalt series. These, together with limestones and Mn-rich cherts of an oceanic island assemblage were tectonically mixed with trench or trench inner slope basin sediments in a subduction zone environment. Variation in mineral chemistry indicates an increase in temperature and decrease in pressure during metamorphism; pressures of 8 kbar and temperatures of approximately 545°C were reached during amphibolite facies metamorphism in the latter stages of deformation. These new data provide good evidence to support the previous interpretation of the Scotia metamorphic complex as a subduction complex.

Notes: Abstract The mid-Tertiary blueschists, eclogites and eclogitic gneisses of northern New Caledonia are the products of four phases of regional metamorphism and deformation (D1–D4). Omphacite, lawsonite and Mn-rich garnet isogradic surfaces were developed during the second deformation (D2) under prograde pressure and temperature conditions. Subsequent deformations (D3–D4) folded these D2 isogradic surfaces. However, within the P-retrograde, T-prograde metamorphic environment of the D4 phase, omphacite altered to albite and chlorite; as a result, a late-stage sub-horizontal isogradic surface developed for omphacite-out where this mineral preserved as relics within syn-D4 albite porphyroblasts. Other minerals that crystallized for the first time (epidote) or had rim additions (almandine phengite) during D4, also form nearly horizontal isogradic surfaces. Porphyroblastic garnet and albite contain inclusion trails, which allow their microstructural development and crystallization of the matrix to be traced from D2 to D4.Late syn-D4 the temperature increased markedly in association with an extensive exothermic decarbonation, even though the rocks were in a state of pressure retrogression. This caused considerable neocrystallization, recrystallization and growth of mattix and porphyroblasts such that, although S2 foliation crenulated by D3 and D4 is readily observable, almost all signs of stored strain due to D3 and D4 have been removed, and the deeper schists and eclogitic gneisses superficially appear to have undergone a drastic annealing recrystallization, post-dating deformation.

Notes: Abstract The sedimentary and igneous rocks comprising the lower Proterozoic Olary Block, South Australia, were deformed and metamorphosed during the mid-Proterozoic ‘Olarian’Orogeny. The area is divided into three zones on the basis of assemblages in metapelitic rocks, higher grade conditions occurring in the south-east. Mineral assemblages developed during peak metamorphism, which accompanied recumbent folding, include andalusite in Zones I and II and sillimanite in Zone III. Upright folding and overprinting of mineral assemblages occurred during further compression, the new mineral assemblages including kyanite in Zone II and kyanite and sillimanite in Zone III. The timing relationships of the aluminosilicate polymorphs, together with the peak metamorphic and overprinting parageneses, imply an anticlockwise P–T path for the ‘Olarian’Orogeny, pressure increasing with cooling from the metamorphic peak.

Notes: Abstract Sodic amphiboles are common in Franciscan type II and type III metabasites from Cazadero, California. They occur as (1) vein-fillings, (2) overgrowths on relict augites, (3) discrete tiny crystals in the groundmass, and (4) composite crystals with metamorphic Ca–Na pyroxenes in low-grade rocks. They become coarse-grained and show strong preferred orientation in schistose high-grade rocks. In the lowest grade, only riebeckite to crossite appears; with increasing grade, sodic amphibole becomes, first, enriched in glaucophane component, later coexists with actinolite, and finally, at even higher grade, becomes winchite. Actinolite first appears in foliated blueschists of the upper pumpellyite zone. It occurs (1) interlayered on a millimetre scale with glaucophane prisms and (2) as segments of composite amphibole crystals. Actinolite is considered to be in equilibrium with other high-pressure phases on the basis of its restricted occurrence in higher grade rocks, textural and compositional characteristics, and Fe/Mg distribution coefficient between actinolite and chlorite. Detailed analyses delineate a compositional gap for coexisting sodic and calcic amphiboles. At the highest grade, winchite appears at the expense of the actinolite–glaucophane pair.Compositional characteristics of Franciscan amphiboles from Ward Creek are compared with those of other high P/T facies series. The amphibole trend in terms of major components is very sensitive to the metamorphic field gradient. Na-amphibole appears at lower grade than actinolite along the higher P/T facies series (e.g. Franciscan and New Caledonia), whereas reverse relations occur in the lower P/T facies series (e.g. Sanbagawa and New Zealand). Available data also indicate that at low-temperature conditions, such as those of the blueschist and pumpellyite–actinolite facies, large compositional gaps exist between Ca- and Na-amphiboles, and between actinolite and hornblende, whereas at higher temperatures such as in the epidote–amphibolite, greenschist and eclogite facies, the gaps become very restricted.Common occurrence of both sodic and calcic amphiboles and Ca–Na pyroxene together with albite + quartz in the Ward Creek metabasites and their compositional trends are characteristic of the jadeite–glaucophane type facies series. In New Caledonia blueschists, Ca–Na pyroxenes are also common; Na-amphiboles do not appear alone at low grade in metabasites, instead, Na-amphiboles coexist with Ca-amphiboles throughout the progressive sequence. However, for metabasites of the intermediate pressure facies series, such as those of the Sanbagawa belt, Japan and South Island, New Zealand, Ca–Na pyroxene and glaucophane are not common; sodic amphiboles are restricted to crossite and riebeckite in composition and clinopyroxenes to acmite and sodic augite, and occur only in Fe2O3-rich metabasites.The glaucophane component of Na-amphibole systematically decreases from Ward Creek, New Caledonia, through Sanbagawa to New Zealand. This relation is consistent with estimated pressure decrease employing the geobarometer of Maruyama et al. (1986). Similarly, the decrease in tschermakite content and increase in NaM4 of Ca-amphiboles from New Zealand, through Sanbagawa to New Caledonia is consistent with the geobarometry of Brown (1977b). Therefore, the difference in compositional trends of amphiboles can be used as a guide for P–T detail within the metamorphic facies series.

Notes: Abstract This, the second of two papers, represents the application of a least squares approach, discussed in the previous paper, to the generation of an internally consistent thermodynamic dataset involving 60 reactions among 43 phases, in the system K2O–Na2O–CaO–MgO–Al2O3–SiO2–H2O–CO2. We make the assumption that all the thermodynamic data, with the exception of enthalpies of formation of the phases, are well known, and solve for an internally consistent set of enthalpies which reproduces the 60, experimentally determined, phase equilibrium reactions. An important difference between our dataset and that of previous alternatives in the literature is that we are able to determine the uncertainties on, and correlations between, the enthalpies of formation for all phases in the set, and hence are able to apply simple error propagation techniques to determine the uncertainties in any phase equilibrium calculations performed using this dataset. Selection of reactions, for geothermometry and geobarometry, may be more readily made by choosing equilibria with small uncertainties in their thermodynamics. Our data are in reasonably close agreement with the high temperature molten oxide calorimetry results on silicate minerals where available, a fact which lends a degree of confidence to the results.

Notes: Abstract The Pennine rocks exposed in the south-east Tauern Window, Austria, contain mineral assemblages which crystallized in the mid-Tertiary ‘late Alpine’regional metamorphism. The pressure and temperature conditions at the thermal peak of this event have been estimated for rocks at four different structural levels using a variety of published and thermochemically derived geobarometers and geothermometers. The results are:(a) In the garnet+chlorite zone, 2–5 km structurally above the staurolite+biotite isograd: T= 490.50°C, P= 7° 1 kbar;(b) Within 0.5 km of the staurolite+biotite isograd: T= 560±300C, P=7.1 kbar;(c) In the staurolite+biotite zone, c. 2.5 km structurally below the staurolite+biotite isograd: T= 610±30°C, P=7.6±1.2 kbar;(d) In the staurolite+biotite zone, 3–4 km structurally below the staurolite+biotite isograd: T= 630±40°C, P= 6.6±1.2 kbar.The pressure estimates imply that the total thickness of overburden above the basement-cover interface in the mid-Tertiary was c. 26.4 km. This overburden can only be accounted for by the Austro-Alpine units currently exposed in the vicinity of the Tauern Window, if the Altkristallin (the ‘Middle Austro-Alpine’nappe) was itself buried beneath an ‘Upper Austro-Alpine’nappe or nappe-pile which was 7.4 km thick at that time.The occurrence of epidote + margarite + quartz pseudomorphs after lawsonite in garnet, indicates that part of the Mesozoic Pennine cover sequence in the south-east Tauern experienced blueschist-facies conditions (T〈450°C, P〈12 kbar) in early Alpine times. Evidence from the central Tauern is used to argue that the blueschist-facies imprint post-dated the main phase of tectonic thickening (D1A) and was thus a direct consequence of continental collision.Combined oxygen-isotope and fluid-inclusion studies on late-stage veins, thought to have been at lithostatic pressure and in thermal equilibrium with their host rocks during formation, suggest that they crystallized from aqueous fluids at 1.1±0.4 kbar and 420.20°C.Early Alpine, late Alpine and vein-formation P–T constraints have been used to construct a P–T path for the base of the Mesozoic cover sequence in the south-east Tauern Window. The prograde part of the P–T path, between early and late Alpine metamorphic imprints, is unlikely to have been a smooth curve and may well have had a low dP/dT overall; the decompression (presumably due to erosion) which occurred immediately before the thermal peak and possibly also earlier in the Tertiary, was probably partly or completely cancelled by the effects of early- to mid-Tertiary (D2A) tectonic thickening. The thermal peak of metamorphism was followed by a phase of almost isothermal decompression, which implies a period of rapid uplift in the middle Tertiary.The peak metamorphic P–T estimates are compared with the solutions of England's (1978) one-dimensional conductive thermal model of the Eastern Alps, and are shown to be consistent with the idea that the late Alpine metamorphism was caused by tectonic burial of the Pennine Zone beneath the Austro-Alpine nappes in the absence of extraneous heat sources, such as large intrusions, at depth.

Notes: Abstract Activity-composition relations in oligoclase near the peristerite gap are investigated in pelites from the Central Menderes Massif. The pressure of metamorphism is estimated independently, from garnet-rutile-ilmenite-kyanite-quartz, as being in the range 4–7 kbar. In the temperature range, 450–600°C approximately, both the Newton-Haselton calibration of the garnet-plagioclase-kyanite-quartz geobarometer and a related simple treatment of garnet-plagioclase-muscovite-biotite give a wide range of apparent pressures, correlated with plagioclase composition and ranging up to 11–12 kbar where the plagioclase is most sodic. This effect is attributed to failure of the activity model for plagioclase used in the Newton-Haselton treatment. It is inferred that, in the present area, γplagAn decreases with increasing XplagAn in the range An15-An25. The data can be interpreted in terms of high γplagAn in the high-albite structure at these temperatures, modified to lower values by ‘e’ordering in the more calcic oligoclases. The ordering appears to be independent of the peristerite gap, and the data do not support the interpretation of the gap as a solvus. Garnet-plagioclase assemblages are unreliable as geobarometers where the plagioclase is more sodic than approximately An20 and T 〈 700°C, and should instead be used to investigate the γ-X behaviour of the plagioclase where independent geobarometry can be used as a constraint.

Notes: Abstract Contact metamorphism adjacent to a porphyritic quartz-monzodiorite at Kentucky, New South Wales, Australia has produced hornfelses in porphyritic leucogranite at a peak temperature of about 650–700° C and a maximum confining pressure of about 2 kbar (200 MPa). A gradation appears to exist from normal slightly peraluminous to modified strongly peraluminous metagranite hornfelses, which have also been enriched in sulphur. The strongly peraluminous hornfelses, containing cordierite, andalusite, sillimanite, biotite, pyrite and pyrrhotite, retain residual porphyritic igneous microstructures. These rocks appear to have been formed by leaching of base cations, during and possibly just before the contact metamorphism. Folia of fibrous sillimanite anastomose between lenticular grains of quartz and feldspar and truncate igneous zoning in plagioclase grains, suggesting that cation leaching and solution transfer occurred during growth of the sillimanite. Fibrous sillimanite also grew in grain boundaries of polygonal aggregates formed by the contact metamorphism. Therefore, at least some of the cation leaching appears to have occurred at the highest metamorphic grade. Metasandstones that are locally strongly peraluminous adjacent to the monzodiorite stock also, have probably undergone similar leaching.

Notes: Abstract The Paikon Series is considered to be a volcanic arc sequence with a mainly neritic sedimentary sequence and bimodal tholeiitic volcanism of early Mesozoic age. The metamorphic assemblages are syn- to post-kinematic with respect to a pre-Tithonian tectonic phase and range from the lawsonite-chlorite-albite facies through transitional Na-amphibole-greenschist facies to the chlorite sub-zone of the greenschist facies. The metamorphic imprint of the Paikon Series corresponds to a temperature range from less than 330° C to ± 450° C under a total pressure from 3 kbar to 6–7 kbar. The overprinting of these facies on an earlier blueschist assemblage, related either to a subduction zone or to a tectonic overpressure caused by thrusting, is suspected.

Notes: Abstract Textural evolution and compositional variation of clinopyroxenes in Ward Creek metabasites are described. Pyroxenes change, with increasing grade, from finegrained aggregates through fan-shaped medium-grained prisms to blocky coarse crystals. Characteristic features of metamorphic pyroxenes include: (1) the occurrence of coexisting pyroxene pairs, the compositions of which are used to delineate compositional gaps; (2) the existence of large compositional variations of pyroxenes, within a single specimen, which record a considerable span of P and/or T for crystallization; and, (3) the development of compositional trends in single specimens and in three metamorphic zones which are progressive in nature.The first formed clinopyroxene (Jd20Aug65Ac15) in the lower lawsonite zone mimics the composition of relict igneous augite. It changes continuously, with increasing grade, at nearly constant low XJd content towards acmite. At a composition around Jd20Aug30Ac50, the trend turns towards jadeite and intersects a solvus to form two coexisting clinopyroxenes in the middle lawsonite zone. At higher grade, the compositional gap becomes restricted towards the jadeite-omphacite join and clinopyroxene increases in XJd toward jadeite. A reversed compositional trend occurs at higher grade; clinopyroxenes decrease in jadeite component at nearly constant Aug/Ac ratio of 50/50 and finally become omphacite in the uppermost pumpellyite and epidote zones. The Na–Ca pyroxenes, close to the binary join Jd–Ac, occur in the lawsonite- and pumpellyite-zones, ranging from XJd= 1.0–0.30 together with Ab and Qz. The ubiquitous occurrence of aragonite at temperature estimates of 170–240° C by Taylor & Coleman (1968) for these zones does not support the low-temperature extrapolation of the Jd–Ab–Qz curve by Holland (1980).The estimated metamorphic field gradient indicates an inflection point at 7 kbar, 200° C. Below this, blueschist facies metamorphism proceeded under dominant pressure-increase from 4 to 7 kbar at nearly constant temperature, about 150–200° C, whereas at higher grade recrystallization, above the inflection point, the metamorphic temperature increased from 200 to 350° C at nearly constant pressure, about 7–8 kbar. Such an inflection point suggests the depth of underplating of either seamounts or accretionary packages in a subduction zone.

Notes: Abstract Sapphirine-bearing rocks occur in three conformable, metre-size lenses in intrusive quartzo-feldspathic orthogneisses in the Curaçà valley of the Archaean Caraiba complex of Brazil. In the lenses there are six different sapphirine-bearing rock types, which have the following phases (each containing phlogopite in addition):A: Sapphirine, orthopyroxene;B: Sapphirine, cordierite, orthopyroxene, spinel;C: Sapphirine, cordierite;D: Sapphirine, cordierite, orthopyroxene, quartz;E: Sapphirine, cordierite, orthopyroxene, sillimanite, quartz;F: Sapphirine, cordierite, K-feldspar, quartz.Neither sapphirine and quartz nor orthopyroxene and sillimanite have been found in contact, however. During mylonitization, introduction of silica into the three quartz-free rocks (which represent relict protolith material) gave rise to the three cordierite and quartz-bearing rocks. Stable parageneses in the more magnesian rocks were sapphirine–orthopyroxene and sapphirine–cordierite. In more iron-rich rocks, sapphirine–cordierite, sapphirine-cordierite–sillimanite, cordierite–sillimanite, sapphirine–cordierite–spinel–magnetite and quartz–cordierite–orthopyroxene were stable. The iron oxide content in sapphirine of the six rocks increases from an average of 2.0 to 10.5 wt % (total Fe as FeO) in the order: C,F–A,D–B,E. With increase in Fe there is an increase in recalculated Fe2O3 in sapphirine.The four rock types associated with the sapphirine-bearing lenses are:I: Orthopyroxene, cordierite, biotite, quartz, feldspar tonalitic to grandioritic gneiss;II: Biotite, quartz, feldspar gneiss;III: Orthopyroxene, clinopyroxene, hornblende, plagioclase meta-norite;IV: Biotite, orthopyroxene, quartz, feldspar, garnet, cordierite, sillimanite granulite gneiss.The stable parageneses in type IV are orthopyroxene–cordierite–quartz, garnet–sillimanite–quartz and garnet–cordierite–sillimanite.Geothermobarometry suggests that the associated host rocks equilibrated at 720–750°C and 5.5–6.5 kbar. Petrogenetic grids for the FMASH and FMAFSH (FeO–MgO–Al2O3–Fe2O3–SiO2–H2O) model systems indicate that sapphirine-bearing assemblages without garnet were stabilized by a high Fe3+ content and a high XMg= (Mg/ (Mg+Fe2+)) under these P–T conditions.

Notes: Abstract Chloritoid–hornblende occurs in quartz–muscovite pelitic schist derived from sediment in a volcaniclastic sequence of the Grenville Supergroup and from reworked sedimentary and regolithic material above the unconformity at the base of the Flinton Group. Comparison of these samples with other pelitic rocks on triangular composition diagrams and in the ACNF and ACFM tetrahedra indicates that the presence of hornblende cannot be explained by unusually high CaO content. The rare assemblage is attributed to a combination of relatively low Al2O3 and high K2O with high CaO/(CaO+Na2O) and FeO/(FeO+MgO).On two qualitative reaction grids derived from AFM diagrams projected through CaO and plagioclase, respectively, the P–T stability field of chloritoid–hornblende overlaps the first appearance of staurolite–biotite in normal pelitic rocks in the kyanite field. Staurolite–hornblende overlaps chloritoid–hornblende and extends to the higher temperatures and pressures of the kyanite–hornblende field.The phase relations in these rocks provide a link between the conventional hornblende-absent grids for pelitic rocks and those for K2O-poor (muscovite-absent) pelitic and mafic amphibolitic rocks.

Notes: Abstract The effect of ductile deformation (dislocation creep) on the kinetics of the aragonite-calcite transformation has been studied at 1 atm (330° C and 360° C) and 900-1500 MPa (500° C) using undeformed and either previously or simultaneously deformed samples (500° C and a strain rate of 10-6 s). Deformation enhances the rate of the transformation of calcite to aragonite, but decreases the rate of transformation of aragonite to calcite. The difference results from a dependence of transformation rate on grain size, coupled with a difference in the accommodation mechanisms, climb versus recry-stallization, of these minerals during dislocation creep. Dislocation climb is relatively easy in calcite and thus plastic strain results in high dislocation densities without significant grain size reduction. The rate of transformation to aragonite is enhanced primarily because of the increase in nucleation sites at dislocations and subgrain boundaries. In aragonite, on the other hand, dislocation climb is difficult and thus plastic strain produces extensive dynamic recry-stallization resulting in a substantial grain size reduction. The transformation of aragonite is inhibited because the increase in calcite nucleation sites at dislocations and/or new grain boundaries is more than offset by the inability of calcite to grow across high angle grain boundaries. Thus the net effect of ductile deformation by dislocation creep on the kinetics of polymorphic phase transformations depends on the details of the accommodation mechanism.

Notes: Abstract Precambrian granulites of the Aldan shield in southern Yakutia, USSR, form a massif of 200,000 km2 bounded by younger fold-belts to the south, west and east. The massif consists of several blocks that reflect a primary heterogeneity of composition and differences in structural and thermodynamic evolution of different parts of the area. According to structural and petrological data the massif can be divided into two megablocks: eastern Aldan and western Aldan. They are separated by a narrow meridional fold-belt. Structural evolution of this central zone was determined by the geodynamics of the mega-blocks and was completed in the late Archaean. Towards the south, this central zone is ‘transformed’into the relatively small Sutam block adjoining the Stanovoy fold-belt that bounds the Aldan shield on the south. The Sutam block is separated from the other structural units of the Aldan shield by a system of north trending grabens filled by post-Archaean sediments.The Aldan shield is composed of Archaean high-grade granulites, while the Stanovoy fold-belt, to the south, consists of highly foliated Proterozoic rocks metamorphosed under relatively lower-grade conditions. However, relics of the granulites are mapped within the fold-belt. They contain high-grade assemblages (e.g. Opx + Sil + Qz, Sap + Qz, Opx + Gr + Sil, etc.). One of the relics, the Tokskii block, which is only slightly touched by diaphthoresis, is located in the southeastern part of the Stanovoy fold-belt. Metamorphic conditions of the Tokskii block are compared with those of the Sutam block and a similar evolution of the units is revealed.Mineral assemblages and mineral compositions do not vary within each unit, but they change in a north-south direction. The Opx + Sil + Qz assemblage has been found only in Sutam and Tok, but not in eastern Aldan and western Aldan. The Sap + Qz assemblage has been found in the Tokskii block but has not yet been found in the Sutam block. The pyrope content in garnets, from metapelites of both blocks, is significantly higher than that from the Aldan (eastern and western blocks) rocks to the north. The most important assemblages from different units of the Aldan shield have been studied using the electron microprobe in order to unravel the metamorphic evolution of the granulites and thus to deduce the thermodynamic regime of this evolution. A geodynamic model for the Aldan shield is discussed in terms of Archaean island arc development.

Notes: Abstract The high-grade meta-plutonic rocks of this study lie entirely within the Jotun Nappe of the southern Norwegian Caledonides. They are divisible on the basis of metamorphic grade and petrographic character into three units, the Storadalen Complex (SCX), the Svartdalen Gneiss (SG), and the Mjølkedøla Purple Gabbro (MPG). The SCX is a differentiated series of ultrabasic to intermediate rocks now showing only tectonite fabrics. It has been metamorphosed to spinel-Iherzolite granulite facies grade. The broadly monzonitic SG is weakly tectonized and internally differentiated. Its metamorphic grade does not exceed plagioclase-lherzolite granulite facies grade. The mis-named MPG is also broadly of monzonitic composition but it retains a coarse ophitic texture, and is of amphibolite facies grade. A gradational boundary exists between the MPG and SG, but the contact between these two units and the SCX is the steeply dipping Tyin-Gjende Fault. The three units represent a comagmatic body of mid-Proterozoic age, metamorphosed during a Sveconorwegian event and finally dismembered and upthrust during the Caledonian Orogeny.The new trace element analyses reported here show that the three rock units have remarkably similar trace element abundances and trends. K-Rb covariation shows increasing K/Rb ratios with increasing K. These patterns were produced by magmatic fractionation processes acting at deep crustal levels, possibly in the presence of a non-aqueous fluid phase. With the exception of K and Sr, close similarities exist between the rocks of this study and present-day calc-alkaline basalts and andesites from island arcs. The high K content is regarded as a primary magmatic feature, but the available data are insufficient to indicate its origin. The Sr contents are abnormally high and are ascribed to metasomatism which occurred during either high-grade metamorphism or post-climactic cooling. There are no systematic geochemical variations with metamorphic grade or degree of deformation.

Notes: Abstract The calibration of geothermometers and geobarometers should involve not only the determination of the parameters in the equation used, but also the uncertainties on, and the correlations between, these parameters. This necessitates the use of a technique such as least squares. Given the poor performance of least squares in the presence of outliers in the data, techniques for identifying outliers for exclusion—regression diagnostics, and techniques for handling data which include outliers—robust regression and jackknifing, are essential. These techniques are summarized and their importance is emphasized, and they are applied to the calibration of the garnet-clinopyroxene Fe-Mg exchange geothermometer.The experimental data of Raheim & Green (1974) and Ellis & Green (1979) are explored using regression diagnostics to discover outliers in the data. After exclusion of the two influential outliers found, a new geothermometer equation for garnet-clinopyroxene Fe-Mg exchange is derived using robust regression and based on all the data: thus, T(K) = 2790 + 10P+ 3140xca,g/1.735 + In KD where T is in Kelvin and P is in kbar. This equation, as might be hoped, is essentially identical to that of Ellis & Green (1979). Equations for calculating the uncertainty in a calculated temperature, contributed by uncertainties in the calibration, are also derived.

Notes: Abstract Zircons have been studied from different layers of migmatites (from Arvika, western Sweden and Nelaug, southern Norway) and from a paragneiss (from Arvika) associated with one of the migmatites. The main purpose of the investigation is to establish whether or not information about zircons can help in the elucidation of the parentage and rock-forming processes of migmatites.The elongation ratio of zircons from all layers is small and characteristic of sedimentary zircons. Further, the absence of characteristic colours and the growth trends of the zircons (indicated by the reduced major axes) observed in the various samples both support a sedimentary parentage for these rocks. The zircons of all layers exhibit secondary growth (overgrowth, outgrowth and multiple growth) due to metamorphism. Compared with the zircons from the paragneiss, those of the migmatite layers are more clouded and less rounded, some of them becoming opaque or even skeletal; this is especially true of the zircons from the leucosomes. These observations indicate an alteration of the original sedimentary zircons in the migmatite, especially in the leucosomes, in response to the migmatization process, previously interpreted as partial melting.

Notes: Abstract Microprobe analysis of the continuous chemical evolution of coexisting biotite-garnet and biotite-garnet-staurolite has been undertaken from interbedded micaschists of the volcanodetrital group of the Vilaine. A thermobarometric study using pertinent mineralogical equilibria reveals a complex P-T evolution, continuous throughout time, from high pressure, medium temperature (kyanite zone) to medium pressure, high temperature (sillimanite zone), then low pressure, medium temperature (andalusite zone). The T, P, fH2o and XH2o variations have been calculated from coexisting biotite-garnet pairs, and from the equilibria: paragonite (in white mica) + quartz ± albite (in plagioclase) + Al silicate + H2O; and, 3 anorthite ± grossular + 2 Alsilicate + quartz. The P-T evolution is correlated with the continuous change in composition of minerals (using P–XMg and T–XMg diagrams) and with the evolution of assemblages. This continuous P-T-time evolution, correlated with the successive formation of S1-S2 foliations, allows us to propose a P-T-time-deformation path for the micaschists and to relate the growth of its mineral components to tectonic processes.

Notes: Abstract Chemical analysis (including H2, F2, FeO, Fe2O3) of a Mg-vesuvianite from Georgetown, Calif., USA, yields a formula, Ca18.92Mg1.88Fe3+0.40Al10.97Si17.81- O69.0.1(OH)8.84F0.14, in good agreement on a cation basis with the analysis reported by Pabst (1936). X-ray and electron diffraction reveal sharp reflections violating the space group P4/nnc as consistent with domains having space groups P4/n and P4nc. Refinement of the average crystal structure in space group P4/nnc is consistent with occupancy of the A site with Al, of the half-occupied B site by 0.8 Mg and 0.2 Fe, of the half-occupied C site by Ca, of the Ca (1,2,3) sites by Ca, and the OH and O(10) sites by OH and O. We infer an idealized formula for Mg-vesuvianite to be Ca19Mg(MgAl7)Al4Si18O69(OH)9, which is related to Fe3+-vesuvianite by the substitutions Mg + OH = Fe3++ O in the B and O(10) sites and Fe3+= Al in the AlFe site.Thermodynamic calculations using this formula for Mg-vesuvianite are consistent with the phase equilibria of Hochella, Liou, Keskinen & Kim (1982) but inconsistent with those of Olesch (1978). Further work is needed in determining the composition and entropy of synthetic vs natural vesuvianite before quantitative phase equilibria can be dependably generated. A qualitative analysis of reactions in the system CaO-MgO-Al2O3-SiO2-H2O-CO2 shows that assemblages with Mg-vesuvianite are stable to high T in the absence of quartz and require water-rich conditions (XH2O 〉 0.8). In the presence of wollastonite, Mg-vesuvianite requires very water-rich conditions (XH2O 〉 0.97).

Notes: Abstract Part of the augite in the Artfjället gabbro consists of symplectitic intergrowths between augite and blebs or lamellae of orthopyroxene. Mineral compositions are consistent with formation of these symplectites by exsolution of orthopyroxene from magmatic augite at a temperature of ca. 900–1000°C. The microstructures indicate that the exsolution mechanism is discontinuous precipitation, whereby the boundary of an augite grain sweeps through a neighbouring augite, leaving the symplectite in its wake. The formation of this symplectitic augite is catalysed by the presence of an intergranular water-rich fluid phase, which promotes grain boundary mobility.

Notes: Abstract Cordierite-anthophyllite rocks and related cordierite-rich, talc-rich and chlorite-rich rocks occur in the Rosebud Syncline, north-west Queensland, Australia, as part of a Proterozoic metasedimentary sequence. Field relations and rock compositions attest the sedimentary origin of these rather unusual metamorphic rocks. Their chemical composition is comparable to that of unmetamorphosed, alkali- and Ca-poor pelites, which are associated with some evaporite deposits.Other occurrences of cordierite-anthophyllite rocks have commonly been interpreted as metamorphosed chloritic alteration products derived from mafic or felsic volcanics. A comparative chemical study, using analyses of cordierite-anthophyllite rocks from such alteration zones and analyses of unmetamorphosed magnesian pelites, demonstrates the general chemical similarity between these two rock groups of entirely different origin. However, distinct differences in major element relations help to distinguish these two genetic groups. Particularly useful are Al2O3–FeO–MgO plots, in which evaporitic pelites occupy the Fe-poor side.The highly magnesian metamorphic rocks from the Rosebud Syncline fall entirely into the compositional field of evaporitic clays and shales. Furthermore, analyses of relatively immobile trace elements give supporting evidence for the sedimentary origin of these cordierite-anthophyllite rocks. The correlation with trace element ranges of clays and shales is very good. However, the correlation with trace element ranges of mafic and felsic volcanics is poor, and major discrepancies occur with Cr, Ni, Co, Nb, Sc, Th and Ti.Thus, the magnesian metamorphics of the Rosebud Syncline appear to be derived from evaporitic clays rich in magnesian clay minerals, such as palygorskite, sepiolite, chlorite or corrensite. The complete metamorphic rock assemblage of interlayered calcareous, aluminous and magnesian rocks is interpreted as a metamorphosed carbonate-evaporite-pelite sequence.

Notes: Abstract A suite of granulites including a meta-ironstone, pyroxenites, and spinel-lherzolites from East Tonagh Island, Enderby Land, Antarctica, preserve exsolution-recry-stallization features consistent with a shared metamorphic evolution that involves marked cooling from initial metamorphic temperatures of nearly 1000°C. Reintegrated pre-exsolution and pre-reaction grain compositions in the meta-ironstone indicate the former coexistence of metamorphic pigeonite (Wo12En38Fs50) and ferroaugite (Wo35En31Fs34) at temperatures in excess of 980°C for pressures of 7 kbar (0.7 GPa) using pyroxene quadrilateral thermometry (Lindsley, 1983). Intra-grain lamellae relationships indicate the exsolution of a second pigeonite (Wo12En35Fs53) from the ferroaugite at temperatures in the range 930–970°C, prior to the c. 720–600°C exsolution of orthopyroxene and clinopyroxene (100) lamellae and later partial recrystallization at similar temperatures. Although pyroxenitic and iherzolitic granulites preserve a much less complete history, reintegrated porphyroclast compositions in these yield temperature estimates which approach those inferred from the metaironstone. Pyroxene thermometry based on neoblast compositions suggests that recrystallization post-dating a late, low intensity, deformation phase (D3) occurred at temperatures greater than 600°C. These results are consistent with the independent evidence obtained from studies of metapelitic and felsic rock types for very high temperature metamorphism throughout the Napier Complex followed by near-isobaric cooling and later deformation under lower-grade granulite facies conditions. Comparison with similar pyroxene data from Fyfe Hills (Sandiford & Powell, 1986) demonstrates further the regional significance of these high temperatures, and implies broadly isothermal metamorphic conditions over a large area (∼ 5000 km2) and thickness (6–9 km) of lower crust at c. 3070 Ma.

Notes: Abstract A detailed field and petrological study of rocks from nappes cut by the Valle dell'Orco (Italian Western Alps), in particular the Sesia–Lanzo composite unit, has revealed geological and metamorphic histories which started in pre-alpine times and lasted up to the alpine subduction-collisional processes. During these processes the nappes sustained an early high P–low T stage and a later low P greenschist facies stage, but followed partly distinctive P–T–time trajectories. This paper discusses the kinematic evolution and the thermal history of the alpine belt from the early subduction/underthrust to the later exhumation stage. The metamorphic crystallization is often governed by incomplete and/or local equilibrium, and the pervasive syn-metamorphic deformation and the composition of the syn-metamorphic fluid phase (if present) have exerted an effective local control on reaction kinetics.

Notes: Abstract Optical and X-ray studies of carbonaceous material in the Tono contact metamorphic aureole, Kitakami Mountains, northeast Japan, have revealed that metamorphic graphitization proceeded through two discontinuous changes: first, optically anisotropic domains develop within the coaly phytoclast, forming transitional material, and then, ordered graphite crystallizes by the decomposition of pre-existing carbonaceous materials. Coaly material disappears in the uppermost chlorite zone. Transitional material appears in the middle of the lower chlorite zone. Graphite appears in the upper chlorite zone and its modal abundance increases across the andalusite iso-grad to the cordierite isograd where all the carbonaceous materials have converted to graphite. The apparently continuous variation in the crystallographic parameters of the bulk carbonaceous material during graphitization is largely due to variation in the modal proportions of three types of carbonaceous materials. The temperature of graphitization in the present area is at least 100°C higher than the temperature in the Sanbagawa and New Caledonia high-pressure metamorphic terrains, probably due to the slow reaction rate of metamorphic graphitization and to the short duration of contact metamorphism.

Notes: Abstract Dissolution of quartz and the recryst-allization and re-equilibration of phyllosilicates produce the dark anastomosing seams that dominate microstructures of tectonic melange which occur in a low-grade, imbricated and multiply deformed, mid-Palaeozoic, intracra-tonic fiysch sequence in northeastern Australia. Seams are composed of very closely spaced or coalesced cleavage lamellae, which are very thin layers of extremely fine-grained phyllosilicates. Cleavage seams enclose lenses of silt-stone or greywacke, which formerly occurred in continuous sedimentary layers, indicating extremely heterogeneous and disruptive deformation. Microphacoids enclosed by cleavage seams have subtle shape asymmetries analogous to those of porphyroclasts. Phyllosilicate-preferred orientations within microphacoids commonly lie at a low angle to enclosing seams, and asymmetric relationships occur within seams. The shape and fabric asymmetries appear to be constant, and are regarded as analgous to S and C planes. The number and extent of seams, the amount of dissolution they indicate, and the efficiency of deformation partitioning imply some enhancement of chemical activity and substantial silica loss from the system. This, in turn, suggests the passage of large amount of silica-undersaturated fluid, and melanges may be zones of high fluid flow. However, the microstructures and the disruptive nature of the fabrics may also reflect the influence of high bulk shear strains and suggest some relationship between the shearing component of deformation and the development of cleavages and foliations.

Notes: Abstract In the Bois de Cené area, blueschist facies rocks, characterized by glaucophane and/ or chloritoid, provide evidence for a suture zone in the Variscan. This terrain is considered to be the eastern equivalent of the Ile de Groix high-pressure metamorphic terrain. Petrological study of the two characteristic types of rocks found in the area shows that the primary high-pressure paragenesis was modified during a retrogression which followed substantial decompression, probably at constant or decreasing temperature. The simplest interpretation is that this retrogression followed tectonic emplacement within a nappe pile.

Notes: Abstract In the Fleur de Lys Supergroup, western Newfoundland, inclusion trails in garnet and albite porphyroblasts indicate that porphyroblasts overgrew a crenulation foliation, without rotation, probably during the deformation event that produced the crenulations. Further deformation of the matrix resulted in strong re-orientation and retrograde metamorphism of the matrix foliation, which is consequently highly oblique to the crenulation foliation preserved in the porphyroblasts. The resulting matrix foliation locally preserves relics of the early crenulations, and also has itself been crenulated later in places. Thus the porphyroblasts grew before the later stages of deformation, rather than during the final stage, as had been suggested previously. The new interpretation is consistent with available 40Ar/39Ar cooling ages which indicate a late Ordovician-early Silurian metamorphic peak, rather than the Devonian peak suggested by previous workers. The inclusion patterns and microprobe data indicate normal outward growth of garnet porphyroblasts from a central nucleus, rather than as a series of veins as proposed by de Wit (1976a, b). However, the observations presented here support growth of porphyroblasts without rotation, which is implied by the de Wit model.

Notes: Abstract In foliated K-feldspar-sillimanite metapelites, fibrous sillimanite is commonly concentrated in folia that anastomose between lenticular pods of coarser-grained aggregates rich in quartz, feldspar and biotite, with or without garnet, cordierite and residual andalusite. Many of the folia appear to be limbs of crenulation microfolds. The sillimanite concentrations may be due largely to the ability of fibrous sillimanite aggregates to undergo strong non-coaxial deformation by grain-boundary sliding (‘fibre sliding’;) without appreciable build-up of dislocations, whereas other minerals are unstable in these zones and so concentrate in lower-strain interfolial zones. Initiation, and especially concentration of the sillimanite in folia, may be assisted by fluid flow and local base-cation leaching, whereby minerals unstable in zones of strong non-coaxial strain are dissolved and removed from these zones.

Notes: Abstract Petrological data from intercalated pelitic schists and greenstones are used to construct a pressure–temperature path followed by the Upper Schieferhülle (USH) series during progressive metamorphism and uplift in the south-west Tauern Window, Italy. Pseudomorphs of Al–epidote + Fe-epidote + albite + oligoclase + chlorite after lawsonite and data on amphibole crystal chemistry indicate early metamorphism in the lawsonite-albite-chlorite subfacies of the blueschist facies at P± 7–8 kbar. Geothermometry and geobarometry yield conditions of final equilibration of the matrix assemblage of 475±25°C, 5–6 kbar; calculations with plagioclase and phengite inclusions in garnet indicate early garnet growth at pressures of ∼ 7.5 kbar. Garnet zoning patterns are complex and reversals in zoning can be correlated between samples. Thermodynamic modelling of these zoning profiles implies garnet growth in response to four distinct phases of tectonic activity. Fluid inclusion data from coexisting immiscible H2O–CO2–NaCl fluids constrain the uplift path to have passed through temperatures of 380 + 30°C at 1.3 + 0.2 kbar.There is no evidence for metamorphism of USH at pressures greater than ∼ 7.5 kbar in this area of the Tauern Window. This is in contrast to pressures of ± 10 kbar recorded in the Lower Schieferhülle only 2–3 km across strike. A history of differential uplift and thinning of the intervening section during metamorphism is necessary to reconcile the P–T data obtained from these adjacent tectonic units.

Notes: Abstract In pelites of the central Menderes Massif, albite and oligoclase with only slight chemical zoning coexist in apparent textural equilibrium in the garnet zone, staurolite zone, and staurolite + kyanite transition zone. The metamorphic temperature range is estimated as approximately 440–550°C (from the Hodges-Spear calibration of the garnet-biotite geo-thermometer), or 440–500°C (Ganguly-Saxena calibration). While oligoclase composition at the peristerite gap changes from An22 to An14, albite also becomes more sodic (An1,5–An0.6). The slope of the albite limb is thus the reverse of that reported in other areas, and may not be a true equilibrium feature. Occurrence of kyanite, at temperatures below the crest of the gap, is due to low water activity in the presence of graphite: aH2o is estimated at approximately 0.1–0.2 from the Na content of muscovite coexisting with albite + kyanite + quartz.

Notes: Abstract The Kvamsøy pyroxenite complex consists of olivine websterite, olivine gabbro and leucogabbro-norite which have been subjected to regional high P-T (HPT) metamorphism. The metamorphism has resulted in a range of disequilibrium textures with the development of coronas and pseudomorphism of the igneous phases. Reactions between felsic and mafic mineral domains have been controlled by variable and selective diffusion of elements, resulting in a variety of local plagioclase-breakdown reactions and in significant compositional variations for the product garnet. Restricted diffusion favours transient reaction stages with garnet ± spinel ± corundum ± zoisite after calcic plagioclase in olivine gabbro and olivine websterite and garnet ± spinel ± kyanite ± quartz + sodic plagioclase in leucogabbro-norite. Complete HPT reaction has produced garnet pyroxenite which consists of garnet + diopside + hornblende + zoisite in gabbroic rocks, while amphibolitization continued during the cooling and uplift history. Grt + Ky + Pl + Qtz geobarometry suggests pressures in the range 13-16 kbar for T= 750°C, comparable with the regional eclogite-forming metamorphism.

Notes: Abstract This, the first two papers, sets out the philosophy and methods of determining an internally consistent thermodynamic dataset for minerals using the least squares method. The applicability of the least squares method is discussed, and it is applied to a small set of experimental equilibria in the system Na2O–Al2O3–SiO2–H2O. The importance is stressed of defining not only the enthalpies of formation of minerals, but also the uncertainties and the correlations among them. The system which has been used as an illustration for this paper serves as a visual guide to the method, as it is small enough to represent graphically in two dimensions. In the paper which follows, we extend the method to a system of 60 equations (experimentally determined equilibria) involving 34 unknowns (enthalpies of formation of mineral end-members).

Notes: Abstract New occurrences of crossite and jadeitic pyroxene are described from a thick metabasite unit within the upper levels of the Peripheral Schieferhülle in the Tauern Window, Austria. Unusual textures are preserved which provide evidence for the reactions and mechanisms involved in the breakdown of crossite and jadeitic pyroxene. Zones of albite and chlorite, produced by reaction between crossite and paragonite, have been preserved due to sluggish reaction kinetics during decompression from the blueschist to the greenschist facies. The zonal sequence is interpreted in terms of chemical potential gradients in Na, Mg and Al, which have been established by overstepping the equilibrium boundary. Breakdown textures of jadeite-acmite pyroxene to a symplectite of albite + hematite + actinolite, and of crossite to talc and actinolite are also described.The occurrence of crossite and jadeitic pyroxene at high levels within the Peripheral Schieferhülle implies that even upper levels of the structural sequence have undergone blueschist facies metamorphism with pressures in excess of 8 kbar during the Alpine collisional event.

Notes: Abstract The chemical evolution of garnets from pelitic rocks of probable Palaeozoic age corresponds to a complex metamorphic evolution of the host rocks.Among the almandine-rich garnets (Alm60–80), two main types of evolution can be distinguished. Early Mn-rich garnets coexisting with kyanite may be replaced by plagioclase and then, during a late stage, by biotite and/or sillimanite. The second type of evolution corresponds to an overgrowth of Mn-poor late-stage garnet on older Mn-rich garnets which corresponds to a thermal peak with sillimanite-type of metamorphism. This new garnet may appear either as an overgrowth with a strong discontinuity, or as small, new euhedral garnet or as skeletal garnet.This chemical evolution of garnet corresponds to an early collisional stage of metamorphism (of high pressure type with high Mn values) of probable Ordovician age followed by uplift and a thermal peak (low Mn values) in Devonian times.

Notes: Abstract Small unexploited copper-lead-zinc deposits, characterized by a distinctive wall-rock association of cordierite quartzite, silica-undersaturated rocks, calc-silicate rocks and impure marbles, occur in quartzofeldspathic gneisses and mafic granulites of the Strangways Metamorphic Complex, central Arunta Block, central Australia. Available data support the hypothesis that these are metamorphosed volcanogenic ore bodies. The chemical compositions of the quartzofeldspathic gneisses are comparable with those of less metamorphosed felsic igneous rocks, particularly the felsic igneous rocks emplaced in the North Australian Orogenic Province in the interval 1880–1800 Ma; and the mafic granulites are chemically similar to basalts (olivine-normative tholeiites). The wall-rock suite can be correlated from chemistry and lithological association with the suites of wall rocks found in unmetamorphosed volcanogenic ore deposits. That the protolith of the cordierite quartzites may well have been leached tuff, similar to the illite-chlorite-quartz tuff found in volcanogenic ore deposits, is also shown by retrogression of the granulitefacies assemblage: cordierite-garnet-ortho-pyroxene-biotite-quartz in the cordierite quartzites to cordierite-anthophyllite-bearing assemblages and thence to chlorite-muscovite-quartz assemblages. Lenses of silica-undersaturated rocks with spinel and, less commonly, sapphirine are interpreted as the metamorphosed equivalents of chlorite-rich pods found within leached tuffs in volcanogenic ore deposits. The wall rocks form sheet-like bodies; this suggests that they were deposited in relatively shallow water, thus precluding the formation of massive sulphides.

Notes: Abstract Comparison of the stability relations of Fe-piemontite, Pm17Ps17Cz66 (Ca2Al2Mn0.5 Fe0.5Si3O12(OH)), with similar experimentally determined results on Pm33Cz67 suggests that, at moderate fo2, addition of Fe to piemontite raises its thermal stability and slightly decreases its sensitivity to oxygen fugacity. Reversal study of the reaction: Fe-piemontite + quartz = garnet (Gr33Sp27And40) + anorthite + fluid at Pfluid= 2 kbar in cold-seal apparatus using solid oxygen buffers was completed. The data indicated breakdown of Pm17Ps17Cz66 at 645°± 10° C along the Cu2O–CuO buffer, 477°± 10° C along the Cu–Cu2O buffer, and 365°± 10° C for the hematite-magnetite buffer. Mn-free clinozoisite and epidote have been shown to be stable to much higher temperatures than piemontite at moderate fo2 (〈 Cu–Cu2O). At very high fo2, however, the presence of Mn+3 in a distorted octahedral site may permit persistence of piemontite to higher temperatures than Mn-poor epidote minerals.The compositional range of natural Fe–Mn–Al piemontites supports these results. Cation partitioning from piemontite-bearing parageneses also indicates crystallization at high fo2, but application of the cited results should be made with caution. Synthetic phases were too fine-grained for optical or microprobe analysis, and reaction was often incomplete. The assumption that all Fe + Mn was contained in piemontite and garnet, respectively, in the low- and high-temperature assemblages is supported by the cell dimensions for these synthetic minerals, which are close to predicted values. The reaction is pseudo-univariant, as solid solution in garnet and piemontite would be fo2-dependent in a more complex chemical system. Although bulk rock and fluid compositions may also have a marked effect on the stability of natural epidote–piemontite, fo2 is the major control on Fe : Mn : Al in epidote minerals.

Notes: Abstract Pelitic assemblages from all major Witwatersrand gold fields record metamorphic conditions of the greenschist facies, with minimal regional grade changes over at least 200 km strike length. Diagnostic metamorphic assemblages are less common in the volumetrically dominant quartzites, the actively-exploited auriferous conglomerates and some of the regionally persistent metapelitic horizons. Bulk rock composition has been a major control on assemblage development.Key metapelitic assemblages include pyrophyllite, chloritoid, chlorite and muscovite in each gold field, with less common metamorphic biotite. Accessory minerals are pyrite, tourmaline, rutile and zircon. The abundance of chloritoid and pyrophyllite in thin shaly units, together with their minor, but widespread, distribution in quartzites and conglomerates, indicate that metamorphic temperatures reached 350°C ± 50°C in all the gold fields. Pressures are less-well constrained, 1–2 kbar being inferred. Outside the gold fields, higher grades are indicated by andalusite and kyanite near granitoid domes and later intrusions.The temperatures during peak metamorphism and the abundance of pyrite provide ideal conditions to (re)mobilize gold and may explain its secondary textural features.

Notes: Abstract Corona textures, which developed in alternating layers in rocks in a supracrustal belt at Errabiddy, Western Australia, involved:(a) The production of staurolite, cordierite and quartz or sapphirine between Kyanite and/or sillimanite and gedrite; and(b) The production of cordierite between garnet and gedrite.These textures are inconsistent with development along the same pressure–temperature path in the system FeO–MgO–Al2O3–SiO2–H2O, but can be accounted for if CaO, mainly in garnet, is taken into account. The sapphirine-bearing kyanite–gedrite textures are explained by lower a(SiO2) during their development. The assemblages indicate a consistent pressure–temperature (P–T) trajectory involving substantial uplift with only a slight decrease in temperature. The history of these rocks includes reheating of originally high-grade rocks that had cooled to a stable conductive geotherm, followed by substantial, essentially isothermal uplift. The tectonic environment for this was presumably the one responsible for emplacement of the high-grade terrain in the upper crust.

Notes: Abstract Polymetamorphic orthoamphibole-bearing gneisses from the vicinity of shear zones in Casey Bay, Enderby Land, Antarctica, record both the overprinting of Archaean granulite lithologies by Proterozoic metamorphism and the subsequent evolution of the latter episode during localized deformation.Mineral chemistry and zoning relationships in orthoamphibole-garnet-kyanite-quartz and later orthoamphibole-garnet-cordierite-quartz assemblages are used together with interpretation of reaction and corona textures to constrain the Proterozoic pressure-temperature path experienced by the rocks. Consideration of reaction topologies, P-T-X(Fe-Mg-A1) relationships in orthoamphibole-bearing assemblages, and standard geothermobarometry indicate that the gneisses underwent a near-isothermal decompression P-T history (steep positive dP/dT) from ± 8 kbar and 700°C to 〈5.5kbar and 650°C. This uplift path is correlated with the general effects of Rayner Complex metamorphism and deformation which occurred after 1100 Ma in a major erogenic belt south of Casey Bay.

Notes: Abstract This contribution discusses the formation of stromatic high-grade migmatites. Volume considerations require that most of the leucosome material is not added from outside the system. A segregation mechanism is necessary except in those cases where the protolith of the migmatite already had a banded structure. Although partial melting is most often advocated to provide the segregation mechanism, several arguments can be raised against high degrees of melting: mineral compositions and even zoning patterns are similar in both mesosomes and leucosomes; sufficient degrees of melting at reasonable temperatures require more than the available amounts of water; the leucosomes do not always approximate to a minimum melt composition; high degrees of melting cannot occur without an appreciable volume increase; etc. Diffusion works as a segregation mechanism at low temperatures. As diffusion rates increase exponentially with temperature diffusion must become still more important as a segregation mechanism at high temperatures. A model is suggested based on the diffusion of components in response to the gradient δσ/δx, where σ= 1/3∑3i=1 σi is the mean pressure. In homogeneously strained rocks, σ3 is larger in rock parts rich in incompetent phases than in rock parts depleted in incompetent phases. Accordingly, mechanically competent but chemically incompetent high-volume phases like quartz and feldspars stressed in micadominated parts of a rock (high σσ) migrate to parts of the rock that are depleted in mica (low σ¯). It is suggested that hornblende occurring in many leucosomes may be premigmatitic or early syn-migmatitic and due to its mechanical competency it initiates the segregation. Diffusion occurs along grain boundaries and is enhanced by small amounts of ‘intergranular fluid’;. At the best, semiquantitative estimates of diffusion rates and distances indicate that the process should work over geological times.

Notes: Abstract Two Archaean synvolcanic stocks with contact aureoles occur in the Wawa greenstone belt near Wawa, Ontario, Canada. The Gutcher Lake and Jubilee stocks consist mainly of granitoid trondhjemite with feldspar laths mottled by white mica + calcite + epidote and rimmed by clear albite. Biotite is partly or wholly pseudomorphosed by chlorite + sphene; some epidote is partly altered to calcite + chlorite. The granitoid phase grades into a foliated phase of quartz + albite + white mica + calcite + chlorite near fracture zones traversing the stocks.The alteration of the Gutcher Lake stock along its foliated margin involved addition of K2O, H2O + CO2, MnO, plus Rb; loss of CaO plus Sr; and a shift in Fe+2/Fet from 0.66 to 0.81. The alteration of the Jubilee stock along the Darwin Shear involved addition of H2O + CO2; loss of Sr; and no significant shift in Fe+2/Fet. The greenschist alteration also modified the contact aureoles bordering both stocks.One interpretation is that regional metamorphism in the Archaean overprinted a greenschist assemblage on both stocks. The alteration was intense near fracture zones and sporadic remote from fractures. Lower integrated water to rock ratios along the Darwin Shear compared to the margin of the Gutcher Lake stock may explain the comparatively lower perturbation of the element abundances and redox state of iron.

Notes: Abstract Most porphyroblasts never rotate during ductile deformation, provided they do not internally deform during subsequent events, with the exception of relatively uncommon but spectacular examples of spiralling garnets. Instead, the surrounding foliation rotates and reactivates due to partitioning of the deformation around the porphyroblast. Consequently, porphyroblasts commonly preserve the orientation of early foliations and stretching lineations within strain shadows or inclusion trails, even where these structures have been rotated or obliterated in the matrix due to subsequent deformation. These relationships can be readily used to help develop an understanding of the processes of foliation development and they demonstrate the prominent role of reactivation of old foliations during subsequent deformation. They can also be used to determine the deformation history, as porphyroblasts only rotate when the deformation cannot partition and involves progressive shearing with no combined bulk shortening component.

Notes: The availability of data in digital formats, the rapid evolution of computer systems and the increased demands for cartographic databases are causing photogrammetrists to consider ways of integrating photogrammetric, remote sensing and database technologies. Examples are presented involving the use of aerial photographs and satellite images in combination with geographical information systems and image processing techniques to assess soil erosion, growth of aquatic vegetation and to enhance satellite images for the compilation or revision of map products.

Notes: A new lightweight vertical camera rig which can be clamped to the front legs of the front seat of a light aircraft is described. In one version, a fixed transparent fairing is attached to the door, whereas in the second version the fairing is attached to the camera rig itself which can then be extended and retracted in flight. This rig has received C.A.A. (Civil Aviation Authority) Approval.

Notes: SPOT-1, launched on 22nd February, 1986, has provided the first opportunity to produce topographic maps from space on an operational basis. The use of SPOT imagery can be justified because of reduced costs and reduced lead times for map production. However SPOT imagery cannot be handled in the same way as conventional photography and it requires new procedures to be adopted, The two main reasons for this are the large area covered by each image and the dynamic form of sensing. The procedures discussed in this paper have been implemented in a working system for map compilation.

Notes: Three authors, representing commercial, educational and governmental photogrammetric organisations, report on their initial uses of analytical plotters.

Notes: Book reviews in this article:PROCEEDINGS OF THE INTERNATIONAL SYMPOSIUM ON SPACE TECHNIQUES FOR GEODYNAMICS. Edited by J. Somogyi. Hungarian Academy of Sciences. Sopron. Hungary.THE SURVEILLANT SCIENCE: REMOTE SENSING OF THE ENVIRONMENT. Edited by R. K. Holz. Second edition. John Wiley and Sons Ltd., New York and Chichester.DISCOVERY FROM THE AIR. By G. W. G. Allen. Edited by J. S. P. Bradford and O. G. S. Crawford with Introduction and Captions by D. N. Riley. Aerial Archaeology.PRINCIPLES OF REMOTE SENSING. By P. J. Curran. Longman, London and New York.SATELLITE OCEANOGRAPHY. By I. S. Robinson. Ellis Horwood Ltd, Chichester.THE RIGHT OF THE LINE. The Royal Air Force in the European War 1939–1945. By J. Terraine. Hodder & Stoughton, London.INDUSTRIAL HISTORY FROM THE AIR. By K. Hudson. Cambridge University Press, Cambridge.INTRODUCTION TO SATELLITE OCEANOGRAPHY. By G. A. Maul. Martinus Nijhoff, Dordrecht.REMOTE SENSING IN CIVIL ENGINEERING. Edited by T. J. M. Kennie and M. C. Matthews. Blackie and Son Ltd. Surrey University Press, Glasgow and London.

Notes: The use of small computers for on line data processing in photogrammetry has developed from the desktop calculators of the early 1970s to the microcomputers of today. The restrictions of machine code programming, small memory and limited display have been overcome. Software has been written for the PI-1A monocomparator using the BBC microcomputer for a calibration test, relative orientation, and strip formation and adjustment in the on line mode. This low cost system is suitable for training inexperienced operators or students in analytical photogrammetry, with the sequence of observation guided by operator prompts and with error checking computations displayed. Re-observations can be made on line and acceptable observations stored for input to the strip adjustment program or subsequent block adjustment.

Notes: Using modern techniques, the analysis of amateur photographs yields results with almost the same accuracy level as with metric photographs. This paper gives a classification of data processing techniques for amateur photographs and presents a well proven method for the treatment of existing amateur photographs, known as Metric Photo Perspective Transformation (MPPT). Data processing is particularly convenient and efficient if on line techniques are used. Operational procedures for the treatment of additional parameters and for the detection of blunders in a time critical on line triangulation system are proposed.

Notes: In 1904, Dr. H. G. Fourcade compiled the first recorded topographic map made using analytical stereophotogrammetric methods. This paper describes how, in 1985, the stereophotography was repeated in very close proximity to Fourcade's original camera base using a modern metric camera. A new topographic map was compiled by computer graphics from stereoscopic observations made on a modern stereocomparator. A direct comparison of the two sets of interpolated contour lines demonstrates that Fourcade produced a highly accurate map covering part of Devil's Peak which is adjacent to Table Mountain near the city of Cape Town.

Notes: The effect on accuracy resulting from some changes to the conventional least squares matching method is investigated. Parallaxes computed automatically with matching methods have been compared with manual measurements made in a stereocomparator. Examples have been taken from both large and small scale aerial photographs and from close range images. Different linear geometric and radiometric parameters have been used as additional unknowns. The use of data snooping in digital matching with the least squares matching method has also been investigated. The results show that the introduction of additional affine parameters has a positive effect on the accuracy when the window size is larger than 30 × 30 pixels. The use of the data snooping technique is promising. The best precision obtained was between 10 pm and 15 μm, expressed as radial root mean square deviation, corresponding to approximately half a pixel. Gross error detection is possible to a large extent with photographs of good image quality.

Notes: The author continues the discussion of a Norwegian project to develop a stereoscopic instrument which will reduce the cost of analytical photogrammetry. Parts I and II of the project were presented at the 1984 Thompson Symposium; the objective at that stage was to build an image space plotter. This paper covers Part III of the project and the extended objective to develop an inexpensive analytical plotter which links with a modern microcomputer.

Notes: Previous assessments of the accuracy of parallax bar heighting were handicapped by small sample sizes. Numerical simulation was avoided due to the difficulty of obtaining co-ordinates for the conjugate principal points. This problem has been overcome, however, and all required photograph coordinates have been rigorously computed following the generation of fictitious data for ground points and exposure stations. The parallax bar heighting process has additionally been simulated in order to investigate both external factors, such as image errors, tilts and ground relief, and also influences intrinsic in the heighting process, for example estimation of flying height, baselining, control configuration and error surface model.