ALBERT

Notes: Abstract Geological relationships and geochronological data suggest that in Miocene time the metamorphic core of the central Himalayan orogen was a wedge-shaped body bounded below by the N-dipping Main Central thrust system and above the N-dipping South Tibetan detachment system. We infer that synchronous movement on these fault systems expelled the metamorphic core southward toward the Indian foreland, thereby moderating the extreme topographic gradient at the southern margin of the Tibetan Plateau. Reaction textures, thermobarometric data and thermodynamic modelling of pelitic schists and gneisses from the Nyalam transect in southern Tibet (28°N, 86°E) imply that gravitational collapse of the orogen produced a complex thermal structure in the metamorphic core. Amphibolite facies metamorphism and anatexis at temperatures of 950 K and depths of at least 30 km accompanied the early stages of displacement on the Main Central thrust system. Our findings suggest that the late metamorphic history of these rocks was characterized by high-T decompression associated with roughly 15 km of unroofing by movement on the South Tibetan detachment system. In the middle of the metamorphic core, roughly 7–8 km below the basal detachment of the South Tibetan system, the decompression was essentially isothermal. Near the base of the metamorphic core, roughly 4–6 km above the Main Central thrust, the decompression was accompanied by about 150 K of cooling. We attribute the disparity between the P–T paths of these two structural levels to cooling of the lower part of the metamorphic core as a consequence of continued (and probably accelerated) underthrusting of cooler rocks in the footwall of the Main Central thrust at the same time as movement on the South Tibetan detachment system.

Notes: Abstract Metre-scale amphibolite boudins in the Cheyenne Belt of south-eastern Wyoming are cut and deformed by shear zones which preserve a full strain transition across 7 cm, from relatively undeformed amphibolite with a relict igneous texture to mylonitic amphibolite with an L-S tectonic fabric. The strain transition is marked by the progressive rotation of amphibole + plagioclase aggregates into parallelism with the shear-zone boundary. An increase in strain magnitude is indicated by development of the tectonic fabric and progressive reduction of amphibole and plagioclase grain size as a result of cataclasis. Bulk chemistry of five samples across a single strain transition shows no significant or systematic variation in major element chemistry except for a minor loss of SiO2, which indicates that the shear zone was a system essentially closed to non-volatile components during metamorphism and deformation. Amphibolites throughout the shear zone consist of amphibole and plagioclase with only minor amounts of quartz, chlorite, epidote, titanite and ilmenite. Within the relatively undeformed amphibolite, amphibole and plagioclase have wide compositional ranges in single thin sections. Amphibole compositions vary from actinolitic hornblende to magnesio-hornblende with increases in Al, Fe, Na and K contents and decreases in Si and Mg that can be modelled as progress along tschermakite, edenite and FeMg-1 exchange vectors from tremolite. Plagioclase ranges from An60 in cores to An30 within grain-boundary domains. With increasing strain magnitude, local variation of amphibole composition decreases as amphibole becomes predominantly magnesio-hornblende. Plagioclase composition range also decreases, although grain-boundary domains still have higher albite content. These petrological data indicate that shear-zone metamorphism was controlled by the magnitude of strain during synmetamorphic deformation. SEM and microprobe imaging indicate that chemical reactions occurred by a dissolution and reprecipitation process during or after cataclastic deformation. This suggests that grain-boundary formation was an important process in the petrological evolution of the shear zone, possibly by providing zones for fluid ingress to facilitate metamorphic reactions. These results highlight the necessity for conducting detailed microstructural evaluation of rocks in order to interpret petrological, isotopic and geochronological data.

Notes: Abstract Ten metamorphic domains can be distinguished in China, comprising four cratonic, three intracratonic and three intercratonic domains. Each domain contains one or more metamorphic belts, each of which, in turn, contains a characteristic metamorphic facies or facies series that was formed during a distinct metamorphic epoch.The metamorphic domains reflect the tectonic domains and tectonic evolution of China. Ancient continental nucleii in the North China and Tarim–Alxa cratons were probably unified with the Yangtze craton during the Early Proterozoic to form the China Platform. Widespread greenschist facies metamorphism, during the Middle and Late Proterozoic, accompanied by glaucophane–greenschist facies metamorphism, represents a rifting and closure event in the China Platform; a second rifting and closure event in the China Platform occurred during the Caledonian. The China and Siberian platforms were closed during the Hercynian to form the Eurasian Continent. Closure of the ancient Tethys Ocean occurred in the Indosinian epoch, and subduction and collision within Xizang (Tibet) and Taiwan occurred during Mesozoic–Cenozoic time.The distribution in time of types of metamorphism in China suggests cyclical changes of metamorphism known as the Archaean, Proterozoic and Phanerozoic megacycles. Each megacycle since the Archaean consists of a change from progressive, low- to intermediate-grade metamorphism to lower grade, greenschist metamorphism that was superimposed on a general trend in which high-grade metamorphism became progressively less important with time. The change in metamorphic megacycles shows a general secular decrease in regional heat supply during metamorphism punctuated by episodic high-grade, progressive metamorphism within orogenic belts.

Notes: Abstract The Shangdan fault in the Qinling Orogenic Belt of China is an important boundary between the Caledonian North Qinling Fold Belt and the Hercynian South Qinling Fold Belt. In the Danfeng area, the fault zone strikes WNW–ESE and comprises four strongly deformed zones and three weakly deformed domains parallel to each other. The fault zone has a complex history of multiple deformation and each domain has a different tectonic style that was formed at different stages of the deformation.The rocks exposed in the weakly deformed domains belong to the Qinling, Danfeng and Liuling Groups. In this paper, the mineral chemistry and mineral assemblages are used to infer the metamorphic conditions and the P–T paths of these units. The metamorphic units in and near the fault zone have different metamorphic conditions and histories that are correlated with the tectonic evolution of the fault zone. Caledonian–Hercynian uplift and southward thrusting of the Proterozoic Qinling Group, over the Danfeng and the Liuling Groups, produced the main metamorphic and tectonic features of the fault zone. Folding of both the Liuling Group and the thrust faults during the Hercynian–Indosinian was accompanied by northward thrusting.

Notes: Abstract Discontinuous ultramylonite zones cut Proterozoic granulite facies gneisses in MacRobertson Land, east Antarctica, and preserve evidence of ductile non-coaxial flow and reverse sense of shear. Cross-cutting relationships indicate that ultramylonite deformation involved overthrusting to the east, but progressively rotated to involve overthrusting to the north; rotation of the principal compressive stress axes is inferred. Extensive pseudotachylite developed during ultramylonitization, the history of individual ultramylonite zones having involved a single episode of pseudotachylite generation. Neoblastic sillimanite indicates ultramylonitization occurred at 〉520° C. On the basis of inferred recrystallized granulite facies mineral assemblages ultramylonitization occurred at 〉700° C, and ≤7.3 ± 0.5 kbar, at aH2O± 0.3 and low aCO2. Comparison of these values with those suggested by metamorphic assemblages in rocks unaffected by mylonitization indicates that the Rayner Complex experienced a late increase in pressure of 1–2 kbar during ultramylonitization. The P-T-aH2O conditions of the ultramylonite zones are inferred to have been close to the solidus for minimum melting, pseudotachylite generation having involved a limited pressure drop during brittle fracturing at high strain rates. Most of the pseudotachylite veins are undeformed; the mechanism(s) of fracturing and melting must have caused strain hardening in rocks surrounding the ultramylonite, further strain having been mostly accommodated by a new or subsidiary shear zone. Renewed stress at reduced strain rates, or renewed stress in zones in which the proportion of pseudotachylite was significantly higher, could have led to the rare occurrences of deformed pseudotachylite. The preservation of fine-grained pseudotachylite is dependent on it remaining dry.

Notes: Abstract C-O-H fluid produced by the equilibration of H2O and excess graphite must maintain the atomic H/O ratio of water, 2:1. This constraint implies that all thermodynamic properties of the fluid are uniquely determined at isobaric-isothermal conditions. The O2, H2O and CO2 fugacities (fo2, fH2O and fCO2) of such fluids have been estimated from equations of state and fit as a function of pressure and temperature. These fugacities can be taken as characteristic for graphitic metamorphic systems in which the dominant fluid source is dehydration, e.g. pelitic lithologies. Because there are no compositional degrees of freedom for graphite-saturated fluids produced entirely by dehydration, the variance of the dehydration process is not increased in comparison with that in non-graphitic systems. Thus, compositional ‘buffering’of C-O-H fluids by dehydration equilibria, a common petrological model, requires that redox reactions, decarbonation reactions or external, H/O ± 2, fluid sources perturb the evolution of the metamorphic system. Such perturbations are not likely to be significant in metapelitic environments, but their tendency will be to increase the fO2 of the fluid phase. At high metamorphic grades, pyrite desulphidation reactions may cause a substantial reduction of fH2O and slight increases in fO2 and fCO2 relative to sulphur-free fluid. At low metamorphic grade, sulphur solubility in H/O ± 2 fluids is so low that pyrite decomposition must occur by sulphur-conserving reactions that cause iron depletion in silicates, a common feature of sulphidic pelites. With increasing temperature and sulphur solubility, pyrite desulphidation may be driven by dehydration reactions or infiltration of H2O-rich fluids. The absence of magnetite and the assemblages carbonate + aluminosilicate or pyrite + pyrrhotite + ilmenite from most graphitic metapelites is consistent with an H/O = 2 model for GCOH(S) fluid. For graphitic rocks in which such a model is inapplicable, a phase diagram variable that defines the H/O ratio of GCOH(S) fluid is more useful than the conventional fO2 variable.

Notes: Abstract Muscovite-poor pelitic schists in the wallrocks of the Proterozoic Annex sulphide deposit, near Prieska, South Africa, contain peak metamorphic assemblages including Crd + Bt + Sil, St + Sil + Bt, Crd + St + Bt and, rarely, Ky + St ° Crd. All rocks include oligoclase, quartz and commonly Fe–Mn garnet, with or without muscovite. Peak assemblages, assigned to M2 regional metamorphism in the Gordonia Belt (Namaqua Province), are syn- to post-kinematic with respect to the main S2 fabric although larger staurolite grains contain S1 inclusion trails. Garnet–biotite thermometry, utilizing corrections for Fe3+, Mn, AlVI and Ti, yields peak temperatures of 571–624°C at pressures of 4.5–6.0 kbar. Consideration of the sympathetic variation of XMn in garnet with XMg in biotite and the preserved zoning patterns in prograde garnets, together with the inferred prograde transition from kyanite to sillimanite, indicates that heating occurred during mild decompression to the M2 metamorphic peak. Sillimanite and cordierite grew last in the prograde sequence, possibly related to a pulse of thermal metamorphism (M3) that is found along the margin of the Keimoes Suite batholith to the north.Retrograde assemblages, including Ms + Ky + Chl + Qtz (after Crd + Bt), Ky + Ms (after Sil) and Chl + Ms (after St) indicate a period of isobaric cooling (M4a) terminated by rehydration in the kyanite stability field at about 500°C.The size difference between prograde (1–2-mm) and retrograde (0.05–0.1-mm) mineral grains indicates substantial undercooling below equilibrium positions of relevant retrograde reactions prior to rehydration, and explains why cordierite that grew during M2 is almost completely destroyed. Post-M4a regrowth of staurolite and garnet (M4b) is spatially linked to sites of M4a rehydration. It reached temperatures of 510–530°C, remaining within the stability field of kyanite.A best fit of the observed textural history to the Namaqua orogenic cycle involves collision and heating (M2/D2) followed by granite intrusion (M3), rifting (M4a) and renewed heating due to crustal loading during volcanism (M4b). The P–T path for the Annex region is consistent with those derived from elsewhere in the Gordonia Belt and, with modification, to that published already for the nearby Prieska Copper Mines.

Notes: Abstract Portions of three Proterozoic tectonostratigraphic sequences are exposed in the Cimarron Mountains of New Mexico. The Cimarron River tectonic unit has affinities to a convergent margin plutonic/volcanic complex. Igneous hornblende from a quartz diorite stock records an emplacement pressure of 2–2.6 kbar. Rocks within this unit were subsequently deformed during a greenschist facies regional metamorphism at 4–5 kbar and 330 ± 50° C.The Tolby Meadow tectonic unit consists of quartzite and schist. Mineral assemblages are indicative of regional metamorphism at pressures near 4 kbar and temperatures of 520 ± 20° C. A low-angle ductile shear zone separates this succession from gneisses of the structurally underlying Eagle Nest tectonic unit. Gneissic granite yields hornblende pressures of 6–8 kbar. Pelitic gneiss records regional metamorphic conditions of 6–7 kbar and 705 ± 15° C, overprinted by retrogression at 4 kbar and 530 ± 10° C. Comparison of metamorphic and retrograde conditions indicates a P–T path dominated by decompression and cooling. The low-angle ductile shear zone represents an extensional structure which was active during metamorphism. This extension juxtaposed the Tolby Meadow and Eagle Nest units at 4 kbar and 520° C. Both units were later overprinted by folding and low-grade metamorphism, and then were emplaced against the Cimarron River tectonic unit by right-slip movement along the steeply dipping Fowler Pass shear zone.An argon isotope-correlation age obtained from igneous hornblende dates plutonism in the Cimarron River unit at 1678 Ma. Muscovite associated with the greenschist facies metamorphic overprint yields a 40 Ar/39 Ar plateau age of 1350 Ma. By contrast, rocks within the Tolby Meadow and Eagle Nest units yield significantly younger argon cooling ages. Hornblende isotope-correlation ages of 1394–1398 Ma are interpreted to date cooling during middle Proterozoic extension. Muscovite plateau ages of 1267–1257 Ma appear to date cooling from the low-grade metamorphic overprint. The latest ductile movement along the Fowler Pass shear zone post-dated these cooling ages. Argon released from muscovites of the Eagle Nest/Tolby Meadow composite unit, at low experimental temperatures, yields apparent ages of c. 1100 Ma. Similar ages are not obtained north-east of the Fowler Pass shear zone, suggesting movement more recently than 1100 Ma.

Notes: Abstract Regional metamorphism in central Inner Mongolia has occurred during four different periods: the middle Proterozoic, the early Palaeozoic, the middle Palaeozoic and the late Palaeozoic tectonic cycles. The middle Proterozoic and late Palaeozoic metamorphic events are associated with rifting and are characterized by low-pressure facies series. The early Palaeozoic metamorphism occurred in two stages: (1) subduction zone metamorphism resulted in paired metamorphic belts in the Ondor Sum ophiolite and Bainaimiao island arc complex; and (2) orogenic metamorphism occurred during the collision of an island arc with the continent. Two types of middle Palaeozoic metamorphism are represented: (1) subduction zone metamorphism, which affected the melange; and (2) orogenic metamorphism that resulted from continent–continent collision.

Notes: Abstract The metamorphic history and tectonic evolution of the Qinling Complex is divided into formation and modification stages. During the Proterozoic formation stage, three deformational sequences are recognized. Andalusite–muscovite, sillimanite–muscovite and sillimanite–K-feldspar zones of amphibolite facies regional metamorphism are earlier than, or synchronous with the first or second phase of folding. Ductile shear zones were formed and Caledonian granites were emplaced during the modification stage. The granites superimposed contact aureoles (garnet–K-feldspar zone) on the regional metamorphic fabric.Metamorphic reactions, P–T conditions of metamorphism and P–T–t paths were estimated by analysis of mineral textures and standard thermobarometric techniques. The P–T–t path of the Proterozoic tectonometamorphic cycle shows prominent clockwise decompression. The P–T–t path of the Caledonian tectonometamorphic cycle is characterized by an early rise of pressure and temperature, followed by isothermal decompression (rapid uplift) and finally with isobaric cooling.The P–T–t paths of the two tectonometamorphic cycles reflect two major stages of collision and uplift in the evolution of the Qinling orogenic belt during the Proterozoic and Caledonian–Hercynian periods, respectively.

Notes: Abstract Eclogites are distributed for more than 500 km along a major tectonic boundary between the Sino-Korean and Yangtze cratons in central and eastern China. These eclogites usually have high-P assemblages including omphacite + kyanite and/or coesite (or its pseudomorph), and form a high-P eclogite terrane. They occur as isolated lenses or blocks 10 cm to 300 m long in gneisses (Type I), serpentinized garnet peridotites (Type II) and marbles (Type III). Type I eclogites were formed by prograde metamorphism, and their primary metamorphic mineral assemblage consists mainly of garnet [pyrope (Prp) = 15–40 mol%], omphacite [jadeite (Jd) = 34–64 mol%], pargasitic amphibole, kyanite, phengitic muscovite, zoisite, an SiO2 phase, apatite, rutile and zircon. Type II eclogites characteristically contain no SiO2 phase, and are divided into prograde eclogites and mantle-derived eclogites. The prograde eclogites of Type II are petrographically similar to Type I eclogites. The mantle-derived eclogites have high MgO/(FeO + Fe2O3) and Cr2O3 compositions in bulk rock and minerals, and consist mainly of pyrope-rich garnet (Prp = 48–60 mol%), sodic augite (Jd = 10–27 mol%) and rutile. Type III eclogites have an unusual mineral assemblage of grossular-rich (Grs = 57 mol%) garnet + omphacite (Jd = 30–34 mol%) + pargasite + rutile.Pargasitic and taramitic amphiboles, calcic plagioclase (An68), epidote, zoisite, K-feldspar and paragonite occur as inclusions in garnet and omphacite in the prograde eclogites. This suggests that the prograde eclogites were formed by recrystallization of epidote amphibolite and/or amphibolite facies rocks with near-isothermal compression reflecting crustal thickening during continent–continent collision of late Proterozoic age. Equilibrium conditions of the prograde eclogites range from P 〉 26 kbar and T= 500–750°C in the western part to P 〉 28 kbar and T= 810–880°C in the eastern part of the high-P eclogite terrane. The prograde eclogites in the eastern part are considered to have been derived from a deeper position than those in the western part. Subsequent reactions, manifested by (1) narrow rims of sodic plagioclase or paragonite on kyanite and (2) symplectites between omphacite and quartz are interpreted as an effect of near-isothermal decompression during the retrograde stage. The conditions at which symplectites re-equilibrated tend to increase from west (P 〈 10 kbar and T 〈 580°C) to east (P 〉 9 kbar and T 〉 680°C). Equilibrium temperatures of Type II mantle-derived eclogites and Type III eclogite are 730–750°C and 680°C, respectively.

Notes: Abstract Fluid evolution paths in the COHN system can be calculated for metamorphic rocks if there are relevant data regarding the mineral assemblages present, and regarding the oxidation and nitrodation states throughout the entire P-T loop. The compositions of fluid inclusions observed in granulitic rocks from Rogaland (south-west Norway) are compared with theoretical fluid compositions and molar volumes. The fluid parameters are calculated using a P-T path based on mineral assemblages, which are represented by rocks within the pigeonite-in isograd and by rocks near the orthopyroxene-in isograd surrounding an intrusive anorthosite massif. The oxygen and nitrogen fugacities are assumed to be buffered by the coexisting Fe-Ti oxides and Cr-carlsbergite, respectively. Many features of the natural fluid inclusions, including (1) the occurrence of CO2-N2-rich graphite-absent fluid inclusions near peak M2 metamorphic conditions (927° C and 400 MPa), (2) the non-existence of intermediate ternary CO2-CH4-N2 compositions and (3) the low-molar-volume CO2-rich fluid inclusions (36–42 cm3 mol−1), are reproduced in the calculated fluid system. The observed CO2-CH4-rich inclusions with minor N2 (5 mol%) should also include a large proportion of H2O according to the calculations. The absence of H2O from these natural high-molar-volume CO2-CH4-rich inclusions and the occurrence of natural CH4-N2-rich inclusions are both assumed to result from preferential leakage of H2O. This has been previously experimentally demonstrated for H2O-CO2-rich fluid inclusions, and has also been theoretically predicted. Fluid-deficient conditions may explain the relatively high molar volumes, but cannot be used to explain the occurrence of CH4-N2-rich inclusions and the absence of H2O.

Notes: Abstract Declining temperatures during decay of a hydrothermal system, or during uplift and erosion, tend to result in veins involving progressive hydration reactions, e.g. veins with laumontite cutting prehnitepumpellyite facies rocks, and stilbite veins cutting laumontite veins.In contrast, examples are described of analcime replacement of heulandite along fractures in heulanditized vitric tuff, of replacement of analcime by albite along fractures in quartz-analcime rock, of joint-controlled replacement of heulandite in tuff by laumontite + quartz + (Na, K)-feldspars, of replacement of laumontite by prehnite + quartz along fractures in alumontitized vitric tuff, and of laumontitebearing feldspathic sandstones cut by vein assemblages of quartz and prehnite ° Calcite. The vein mineral assemblage, sometimes with pumpellyite and/or epidote in the prehnite-bearing veins, tends to spread as a zone of dehydration into the adjacent country rock. Except perhaps for albite replacement of analcime, and for laumontite replacement of heulandite, these open-system reactions involve cation activity ratios in the fluid. All involve dehydration. They are favoured by an increase in temperature, and except under certain situations where P-T equilibrium curves have negative slopes, are favoured by a fall in PH2O. Evidence indicates that in at least some cases the triggering mechanism was a drop in PH2O; this may be a widespread phenomenon associated with brittle fracture in the seismogenic upper crust. This may cause fluid pressure to drop from values approaching lithostatic to nearer hydrostatic, and equilibrium may be displaced to yield a less hydrous assemblage that appears as a dehydration vein and vein verge. The dehydration vein assemblage may be diagnostic of a higher grade mineral facies and adds to the mineral complexity attributable to varying permeabilities and fluid pressures in upper crustal strata. Mineral facies are likely to be more uniformly distributed in higher grade rocks from below the brittle-ductile transition zone.Reactions involving complex solid solutions are inappropriate as facies boundaries.

Notes: Abstract Mg–Fe carpholite is widespread in the Diahot region of New Caledonia in highly aluminous schists and as veins in what was originally a clay-rich hydrothermal alteration envelope about massive suphide deposits. These carpholites have Fe/(Fe + Mg) ratios of 0.03–0.65 and no significant Mn component. Mg-carpholite + quartz occur in assemblages with chlorite or pyrophyllite, pyrophyllite + kaolinite and pyrophyllite + diaspore. Temperatures of 230–320° C and minimum pressures of 7 kbar are indicated for the Mg–Fe carpholite-bearing rocks. The regional distribution of aragonite and Mg–Fe carpholite parallel to a major zone of dominantly transcurrent movement and oblique to the trend of the subduction complex indicates the high-P/low-T schists owe their rapid uplift and preservation to the vertical component of the transcurrent faulting.

Notes: Abstract A metasomatic diopside rock occurs at the top of the dolomitic Connemara Marble Formation of western Ireland and contains titanite and K-feldspar in addition to around 90% diopside (XMg= 0.90–0.97). U–Pb isotopic measurements on this mineral assemblage show that the titanite is both unusually uranium-rich and isotopically concordant, with the result that a precise U–Pb age of 478 ± 2.5 Ma can be determined. The age is identical within error to a less precise Rb–Sr age of diopside–K-feldspar of 483 ± 6 Ma. Petrological evidence indicates that the assemblage crystallized at c. 620° C close to or below the closure temperature of titanite. The age thus provides a precise estimate of the time of metamorphism; this age is 11 ± 3 Ma younger than the 490 Ma age for nearby gabbroic plutons which has previously been used to constrain the peak metamorphic age. This difference accords well with geological evidence that the gabbros were emplaced prior to the metamorphic peak. Analysis of minerals with high closure temperature from assemblages whose crystallization is unambiguously associated with a specific episode of fluid infiltration at the peak of metamorphism provides the basis for a new approach to dating metamorphism. The success of this approach is demonstrated by the results from Connemara.

Notes: Abstract Eclogites with a wide range in bulk composition are present in the Münchberg Massif, part of the Variscan basement of the Bohemian Massif in north-east Bavaria. New analyses of the primary phases garnet, omphacite, phengite and amphibole, as well as the secondary phases clinopyroxene II, various amphiboles, biotite/phlogopite, plagioclase, margarite, paragonite, prehnite and pumpellyite, reveal a complex uplift history. New discoveries were made of samples with very jadeite-rich primary omphacite as well as a secondary omphacite in a symplectite with albite. Various geothermobarometric techniques, together with thermodynamic databases (incorporating separately determined activity–composition values) and experimental data have clustered the minimum conditions for the primary assemblages to the P–T range 650 ± 60° C, 14.3 ± 1 kbar. However, jadeite (in omphacite)–kyanite–paragonite (in phengite) and zoisite–grossular (in garnet)–kyanite–quartz relationships suggests pressures of 25–28 kbar at the same temperatures. The fact that the secondary omphacite–plagioclase assemblage yields pressures within a few hundred bars of the minimum pressures for the plagioclase-free assemblages strongly suggests that the minimum values are serious underestimates.Zoning, inclusion suites and breakdown reactions of primary phases, in addition to new minerals formed during uplift, define a polyphase metamorphic evolution which, from geochronological evidence, occurred solely within the Variscan cycle. The complex breakdown in other Bohemian Massif eclogites and the distinct variation in their temperatures during uplift suggest a multi-stage thrusting model for the regional evolution of the eclogites. Such an evolution has significance with respect to incorporation of mantle slices into crustal sequences and fluid derivation from successively subducted units, possibly driving the breakdown reactions.

Notes: Abstract At Kottavattam, southern Kerala (India), late Proterozoic homogeneous leptynitic garnet–biotite gneisses of granitic composition have been transformed on a decimetric scale into coarse-grained massive charnockite sensu stricto along a set of conjugate fractures transecting the gneissic foliation. Charnockitization post-dates the polyphase deformation, regional high-grade metamorphism and anatexis, and evidently occurred at a late stage of the Pan-African tectonothermal history. Geothermobarometric and fluid inclusion data document textural and chemical equilibration of the gneiss and charnockite assemblages at similar Plith–T conditions (650–700°C, 5–6 kbar) in the presence of carbonic fluids internally buffered by reaction with graphite and opaque mineral phases (XCO2= 0.7–0.6; XH2O= 0.2–0.3; XN2= 0.1; log fO2= -17.5).Mineralogical zonation indicates that charnockitization of the leptynitic gneiss involved first the breakdown of biotite and oxidation of graphite in narrow, outward-migrating transition zones adjacent to the gneiss, followed by the breakdown of garnet and the neoblastesis of hypersthene in the central charnockite zone. Compared to the host gneiss, the charnockite shows higher concentrations of K, Na, Sr, Ba and Zn and lower concentrations of Mg, Fe, Ti, V, Y, Zr and the HREE, with a complementary pattern in the narrow transition zones of biotite breakdown. The Plith–T–XH2O data and chemical zonation patterns indicate charnockitization through subsolidus-dehydration reaction in an open system. Subsequent residence of the carbonic fluids in the charnockite resulted in low-grade alteration causing modification of the syn-charnockitic elemental distribution patterns and the properties of entrapped fluids. We favour an internally controlled process of arrested charnockitization in which, during near-isothermal uplift, the release of carbonic fluids from decrepitating inclusions in the host gneiss into simultaneously developing fracture zones led to a change in the fluid regime from ‘fluid-absent’in the gneiss to ‘fluid-present’in the fracture zones and to the development of an initial fluid-pressure gradient, triggering the dehydration reaction.

Notes: Abstract Large calcite veins and pods in the Proterozoic Corella Formation of the Mount Isa Inlier provide evidence for kilometre-scale fluid transport during amphibolite facies metamorphism. These 10- to 100-m-scale podiform veins and their surrounding alteration zones have similar oxygen and carbon isotopic ratios throughout the 200 × 10-km Mary Kathleen Fold Belt, despite the isotopic heterogeneity of the surrounding wallrocks. The fluids that formed the pods and veins were not in isotopic equilibrium with the immediately adjacent rocks. The pods have δ13Ccalcite values of –2 to –7% and δ18Ocalcite values of 10.5 to 12.5%. Away from the pods, metadolerite wallrocks have δ18Owhole-rock values of 3.5 to 7%. and unaltered banded calc-silicate and marble wallrocks have δ13Ccalcite of –1.6 to –0.6%, and δ18Ocalcite of 18 to 21%. In the alteration zones adjacent to the pods, the δ18O values of both metadolerite and calc-silicate rocks approach those of the pods. Large calcite pods hosted entirely in calc-silicates show little difference in isotopic composition from pods hosted entirely in metadolerite. Thus, 100- to 500-m-scale isotopic exchange with the surrounding metadolerites and calc-silicates does not explain the observation that the δ18O values of the pods are intermediate between these two rock types. Pods hosted in felsic metavolcanics and metasiltstones are also isotopically indistinguishable from those hosted in the dominant metadolerites and calc-silicates. These data suggest the veins are the product of infiltration of isotopically homogeneous fluids that were not derived from within the Corella Formation at the presently exposed crustal level, although some of the spread in the data may be due to a relatively small contribution from devolatilization reactions in the calc-silicates, or thermal fluctuations attending deformation and metamorphism. The overall L-shaped trend of the data on plots of δ13C vs. δ18O is most consistent with mixing of large volumes of externally derived fluids with small volumes of locally derived fluid produced by devolatilization of calc-silicate rocks. Localization of the vein systems in dilatant sites around metadolerite/calc-silicate boundaries indicates a strong structural control on fluid flow, and the stable isotope data suggest fluid migration must have occurred at scales greater than at least 1 km. The ultimate source for the external fluid is uncertain, but is probably fluid released from crystallizing melts derived from the lower crust or upper mantle. Intrusion of magmas below the exposed crustal level would also explain the high geothermal gradient calculated for the regional metamorphism.

Notes: Abstract The widespread khondalite series of south-east Inner Mongolia consists largely of biotite–sillimanite–garnet gneiss and quartzo-feldspathic gneiss with some marble and mafic granulite layers. It has experienced two metamorphic events at c. 2500 and 1900–2000 Ma.A pre-peak stage of the first metamorphism at T= 600–700°C and P 〉 6–7 kbar is recognized by the relict amphibolite facies assemblage Ky–Grt–Bt–Pl–Qtz and ‘protected’inclusions of biotite, hornblende, sodic plagioclase and quartz in garnet or orthopyroxene. The peak stage, with T=c. 800 ± 50°C and P 8–10 kbar, is characterized by the widespread granulite facies assemblages Sil–Grt–Bt–Kfs–Pl–Qtz in gneiss and Opx–Cpx–Pl ± Hbl ± Grt in granulite. The P–T–t path suggests that the supracrustal sequence was buried in the lower crust by tectonic thickening during D1–D2.The beginning of the second metamorphism is characterized by further temperature rise to 700°C or more at lower pressure. This stage is manifested by the appearance of cordierite after garnet, fibrolite (Sil2) after biotite in gneiss and transformation of Hbl1 into Opx2 and Cpx2 in granulite. Coronas of symplectitic Opx2 + Pl2 surrounding Grt1 and Cpx1 in mafic granulite are interpreted as products of near-isothermal decompression. The P–T–t path may be related tectonically to waning extension of the crust by the end of the early Proterozoic.

Notes: Abstract The Qinling–Dabie accretionary fold belt in east-central China represents the E–W trending suture zone between the Sino-Korean and Yangtze cratons. A portion of the accretionary complex exposed in northern Hubei Province contains a high-pressure/low-temperature metamorphic sequence progressively metamorphosed from the blueschist through greenschist to epidote–amphibolite/eclogite facies. The ‘Hongan metamorphic belt’can be divided into three metamorphic zones, based on progressive changes in mineral assemblages: Zone I, in the south, is characterized by transitional blueschist–greenschist facies; Zone II is characterized by greenschist facies; Zone III, in the northernmost portion of the belt, is characterized by eclogite and epidote–amphibolite facies sequences. Changes in amphibole compositions from south to north as well as the appearance of increasingly higher pressure mineral assemblages toward the north document differences in metamorphic P–T conditions during formation of this belt. Preliminary P–T estimates for Zone I metamorphism are 5–7 kbar, 350–450°C; estimates for Zone III eclogites are 10–22 kbar, 500 ± 50°C.The petrographic, chemical and structural characteristics of this metamorphic belt indicate its evolution in a northward-dipping subduction zone and subsequent uplift prior to and during the final collision between the Sino-Korean and Yangtze cratons.

Notes: Abstract The Lancang metamorphic terrane consists of an eastern low-P/T belt and a western high-P/T belt divided by a N–S-trending fault. Protoliths of both units are mid–late Proterozoic basement and its cover. The low-P/T belt includes the Permian Lincang batholith, related amphibolite facies rocks of the Damenglong and Chongshan groups, and Permo-Triassic volcanic and volcaniclastic rocks. Most whole-rock Rb–Sr isochron and U–Pb zircon ages of the Lincang batholith are in the range 290–279 and 254–212 Ma, respectively. Metamorphism of the low-P/T belt reaches upper amphibolite with local granulite facies (735°C at 5 kbar), subsequently retrogressed at 450–500°C during post-Triassic time. The high-P/T rocks grade from west to east from blueschist through transitional blueschist/greenschist to epidote amphibolite facies. Estimated P–T conditions follow the high-P intermediate facies series up to about 550–600°C, at which oligoclase is stable. The 40Ar/39Ar plateau age of sodic amphibole in blueschist is 279 Ma.The paired metamorphic belts combined with the spatial and temporal distribution of other blueschist belts lead us to propose a tentative tectonic history of south-east Asia since the latest Precambrian. Tectonic juxtaposition of paired belts with contrasting P–T conditions, perhaps during collision of the Baoshan block with south-east Asia, suggests that an intervening oceanic zone existed that has been removed. The Baoshan block is a microcontinent rifted from the northern periphery of Gondwana. Successive collision and amalgamation of microcontinents from either Gondwana or the Panthalassan ocean resulted in rapid southward continental growth of c. 500 km during the last 200 Ma. Hence, the Lancang region in south-east Asia represents a suture zone between two contrasting microcontinents.

Notes: Abstract The high-grade metamorphic rocks of southern Brittany underwent a complex tectonic evolution under various P-T conditions (high-P, high-T), related to stacking of nappes during Palaeozoic continentcontinent collision.The east to west thrusting observed in the whole belt is strongly perturbed by vertical movements attributed to the ascent of anatectic granites in the high-T area. The field reconstruction of subvertical, closed elliptical structures in gneisses and migmatites, associated with the subhorizontal, doubly radial pattern of stretching lineation in the mica schists, suggests the existence of an elliptical diapiric body buried at depth beneath the present erosion level.Deformation is associated with a complex P-T evolution partly recorded in aluminous gneisses (kinzigites, e.g. morbihanites). A chronology of successive episodes of mineral growth at different compositions is established by detailed studies of the mineral-microstructure relationships in X-Z sections, using the deformation-partitioning concept (low- and high-strain zones).Several thermometric and barometric calibrations are applied to mineral pairs either in contact or not in contact but in equivalent microstructiiral positions with respect to the deformation history. This methodology provides a continuous microstructural control of P-T variations through time and leads to three P-T-t-d paths constructed from numerous successive P-T estimations. Path 1 is a clockwise retrograde path preserved in low-strain zones, which records general exhumation movements after crustal thickening. Paths 2 and 3 are clockwise prograde/retrograde paths from high-strain zones; they are interpreted and discussed in the light of models of crustal anatexis and upward movement of magma (diapirism). Deformation and P-T effects induced by diapirism can be distinguished from the general deformation-metamorphic history of a belt, and would seem to be produced during a late stage of its history.The present microstructural-petrological approach to defining successive mineral equilibria in relation to progressive deformation steps provides a far more accurate evaluation of the metamorphic evolution than is possible by ‘standard’thermobarometry.

Notes: Abstract The metamorphic history of the Middle to Upper Jurassic volcanic and hypabyssal rocks exposed in the Klamath Mountains and Sierra Nevada of California is related, in part, to the rifting of a volcano-plutonic arc. The Callovian to Kimmeridgian rocks exposed in the region consist of, from north-west to south-east, a back-arc ophiolite, a rifted volcanic arc and a volcanic arc complex. All of these units have been metamorphosed and contain various combinations of the phases chlorite, amphibole, epidote, prehnite and pumpellyite. Projection of coexisting phases onto the composition plane MgO/(MgO + FeO) and Al2O3+ Fe2O3 - 0.75 CaO - Na2O through quartz, water, albite and epidote results in consistent mineralogical compatibilities within each region, but crossing tie-lines between regions. This suggests that the volcanic and hypabyssal rocks from each region have equilibrated under different intensive conditions.The back-arc ophiolite in the north has suffered subseafloor high-T/P hydrothermal metamorphism with geothermal gradients on the order of 100° C km−1. The rifted volcanic arc has undergone synchronous burial, hydrothermal and contact metamorphism. Metamorphic field gradients in the region pass through the prehnite-pumpellyite and greenschist facies suggesting geothermal gradients on the order of 30° C km−1. The southernmost volcanic arc complexes contain metavolcanics of the pumpellyiteactinolite and greenschist facies suggesting moderate- to high-P/T metamorphism and geothermal gradients on the order of 20° C km−1.The apparent increase in rifting and calculated geothermal gradients from south-east to north-west suggest that the observed very low- and low-grade metamorphism may be a response to enhanced thermal gradients during extension of the volcanic arc. This correlation between the extent of rifting and metamorphism is consistent with a model of diastathermal metamorphism of a propagating rift along the western margin of North America during the Late Jurassic. The plate tectonic setting may be analogous to the present-day Andaman Sea region.

Notes: Abstract The Upper Cretaceous and Tertiary volcanic sequences in the Chilean Andes are affected by burial metamorphism. For example, in central Chile (between 32°30’and 35°S), the Abanico Formation, a folded upper Cretaceous to Palaeogene unit composed of basic lavas, tuffs and ash flows of intermediate composition and volcaniclastic sandstones, is characterized by heulandite- to laumontite-bearing zeolite facies assemblages in its upper part passing with depth to prehnite–pumpellyite facies assemblages.However, at c. 33°30'S in the Abanico Hill area, located just east of a graben at Santiago (the longitudinal Central Valley), the alteration pattern is unrelated to stratigraphic depth. It is characterized by a lateral increase in grade defined by assemblages with yugawaralite (reported for the first time in the Andes) laumontite, then wairakite ± epidote, and finally with abundant epidote successively closer to the graben boundary. This pattern was formed in a palaeogeothermal system with a high-T and a very low-P gradient. Geothermal alteration has also been inferred from the border zone of a Neogene caldera in the Abanico Hill area, and from the western fault boundary of the graben.These expressions of geothermal alteration, together with the occurrence of caldera structures, the huge volume of ignimbrites and numerous epithermal precious metal deposits of late Cretaceous and Tertiary age in central and northern Chile, suggest that fossil geothermal systems of this age are probably common features in the Chilean Andes.

Notes: Abstract Petrological, oxygen isotope and 40Ar/39Ar studies were used to constrain the Tertiary metamorphic evolution of the lower tectonic unit of the Cyclades on Tinos. Polyphase high-pressure metamorphism reached pressures in excess of 15 kbar, based on measurements of the Si content in potassic white mica. Temperatures of 450–500° C at the thermal peak of high-pressure metamorphism were estimated from critical metamorphic assemblages, the validity of which is confirmed by a quartz–magnetite oxygen isotope temperature of 470° C. Some 40Ar/39Ar spectra of white mica give plateau ages of 44–40 Ma that are considered to represent dynamic recrystallization under peak or slightly post-peak high-pressure metamorphic conditions. Early stages in the prograde high-pressure evolution may be documented by older apparent ages in the high-temperature steps of some spectra.Eclogite to epidote blueschist facies mineralogies were partially or totally replaced by retrograde greenschist facies assemblages during exhumation. Oxygen isotope thermometry of four quartz–magnetite pairs from greenschist samples gives temperatures of 440–470° C which cannot be distinguished from those deduced for the high-pressure event. The exhumation and overprint is documented by decreasing ages of 32–28 Ma in some greenschists and late-stage blueschist rocks, and ages of 30–20 Ma in the lower temperature steps of the Ar release patterns of blueschist micas. Almost flat parts of Ar–Ar release spectra of some greenschist micas gave ages of 23–21 Ma which are assumed to represent incomplete resetting caused by a renewed prograde phase of greenschist metamorphism.Oxygen isotope compositions of blueschist and greenschist facies minerals show no evidence for the infiltration of a δ18O-enriched fluid. Rather, the compositions indicate that fluid to rock ratios were very low, the isotopic compositions being primarily controlled by those of the protolith rocks. We assume that the fundamental control catalysing the transformation of blueschists into greenschists and the associated resetting of their isotopic systems was the selective infiltration of metamorphic fluid. A quartz–magnetite sample from a contact metamorphic skarn, taken near the Miocene monzogranite of Tinos, gave an oxygen isotope temperature of 555° C and calculated water composition of 9.1%. The value of δ18O obtained from this water is consistent with a primary magmatic fluid, but is lower than that of fluids associated with the greenschist overprint, which indicates that the latter event cannot be directly related to the monozogranite intrusion.

Notes: Abstract Orthopyroxene-bearing migmatites, exposed at the summit of Cone Peak in the Santa Lucia Range, California, offer an opportunity to explore potential links between granulite facies metamorphism and migmatite formation. Geothermobarometry indicates that the metamorphic temperatures and pressures were in the approximate ranges of 700–750° C and 7.0–7.5 kbar. The rocks at the summit comprise three domains: relatively coarse-grained, leucocratic veins; relatively fine-grained, biotite-enriched zones at the margins of the veins; and a biotite–hornblende-bearing host rock. Orthopyroxene is concentrated in the veins, which have also the highest ratio of anhydrous to hydrous minerals of the three rock types. The composition of the veins, together with their textures and modes, suggest that they formed through anatexis involving a dehydration-melting reaction which consumed hornblende and produced orthopyroxene. Variability in mineralogy and composition indicates that there was some local migration of magma along the veins before their final solidification. The biotite-enriched zones formed either by the concentration of residual biotite at the margins of the vein, or through the metasomatic conversion of hornblende (and/or pyroxene) to biotite, or by a combination of the two processes. Significant differences in the chemistry of the neosome (vein + biotite-enriched zone) and the host rock rule out simple dehydration melting in a local closed system. The model that explains best the mineralogical and chemical patterns involves triggering of melting by an influx of a low-aH2O mixed fluid which added K and Si to and removed Ca from the neosome.

Notes: Abstract In the Adirondack Highlands of New York State, the effect of granulite facies metamorphism on the physical and isotopic characteristics of zircon from anorogenic plutonic rocks has a distinct geographical pattern. The location of zircon populations which appear to have been altered describes a roughly circular area where metamorphic palaeotemperatures have been determined to be in excess of 750° C. Zircons from anorogenic plutonic rocks outside this area were undisturbed during metamorphism and yield well constrained ages.Granitic, charnockitic and mangeritic anorogenic plutonic rocks peripheral to the Marcy anorthosite massif have large, euhedral, prismatic zircons that display fine, internal, magmatic growth zonations and abundant, randomly orientated, mineral inclusions. Co-genetic zircon fractions yield linear discordant arrays and well constrained upper intercepts of 1125–1157 Ma. Metamorphic zircon is limited to sporadically developed and volumetrically insignificant, clear, low-U overgrowths or protuberances.In marked contrast, zircons from petrographically and geochemically identical rocks adjacent to, or within, the Marcy anorthosite massif are typically large, limpid, anhedral to subhedral crystals or crystal fragments lacking internal features except for tubular cavities and CO-2-rich inclusions. Co-genetic zircon fractions yield nearly concordant, non-linear clusters with 207Pb/206Pb minimum ages of 1073–1095 Ma. Metamorphic overgrowths cannot be readily identified by optical or cathodoluminscence techniques; however, many grains show complex and unusual external boundaries suggestive of post-crystallization modification.These data indicate that temperatures as low as 750° C, in combination with other factors, may have been sufficient to facilitate recrystallization, and diffusion of radiogenic Pb from the zircon crystal structure, during the complex, protracted metamorphism of the Adirondack Highlands.

Notes: Abstract Archaean greenstone belts are often cut by major shear zones, for example the Cadillac tectonic zone (CTZ) of the southern Abitibi region in north-western Quebec. At McWatters, the CTZ contains slices of metavolcanic units bounded by corridors of highly strained and altered rocks. Mineral assemblages of the metabasites record the metamorphic evolution of the CTZ.The McWatters metabasalts and metagabbros have similar chemistry but different mineral assemblages consisting of variable amounts of actinolite, hornblende, chlorite, albite, epidote, quartz, carbonates, titanite, biotite, rutile, magnetite, ilmenite and sulphides. The different mineral assemblages, which coexist in a single tectonic slice, can be divided into three types, characterized by (A) presence of hornblende and actinolite, (B) presence of actinolite and epidote, and (C) absence of amphibole and epidote. Partial replacements indicate that these mineral assemblages are not in equilibrium. The hornblende of the least altered and deformed samples of the type A assemblage is a relict of a prograde metamorphic event, contemporaneous with the development of the main schistosity. The prograde conditions are estimated at P= 5 kbar, T= 475° C with low Pf. The more altered and deformed samples of the type C assemblage record a later retrograde metamorphic event. Conditions of the later event are estimated at P= 4 kbar, T= 400° C with higher Pf. Widespread calcite precipitation occurred during a later episode. The diversity of the mineral assemblages results from permeability variations along the high-strain zones of the CTZ.

Notes: Abstract Mineral equilibria in the system CaO–MgO–Al2O3–SiO2–H2O provide a basis for mapping of four reaction isograds and one bathograd in the low-pressure transition from subgreenschist to greenschist facies. Most of the Matachewan area of the Abitibi greenstone belt is in the lower-pressure bathozone, as indicated by the widespread occurrences of the subassemblage Prh–Chl. The higher-pressure bathozone is indicated by two occurrences of Pmp–Act–Ep–Qtz, but in these samples the bathograd is displaced to anomalously low pressure by the high Fe content of the coexisting minerals. This illustrates the need to analyse coexisting minerals, calculate activities of end-member species, and compute P–T curves for individual samples before interpreting the isograd/bathograd pattern.Petrographic and microprobe analysis indicates that great care must be taken in the selection of ‘equilibrium’ assemblages. Pyroxene phenocrysts in one sample are replaced by the assemblage Pmp–Act–Ep–Chl–Qtz, whereas Prh–Act–Ep–Chl–Qtz occurs in the groundmass. Compositional variation may be more cryptic, as in a sample of metabasaltic hyaloclastite that contains two spatially distinct ‘univariant’ assemblages, Prh–Pmp–Ep–Chl–Qtz and Prh–Act–Ep–Chl–Qtz, within the devitrified matrix. Whereas chlorite compositions are similar in both assemblages, prehnite and epidote in the latter assemblage are significantly richer in Fe and poorer in Al. Accordingly, the rock is interpreted to contain two distinct ‘univariant’ assemblages, rather than one ‘invariant’ assemblage (Prh–Pmp–Act–Ep–Chl–Qtz). The displaced ‘univariant’ curves for this sample intersect at 2.2 kbar and 250°C.Taking account of all thermobarometric implications, the low-grade limit of the greenschist facies is at 250–270°C and 2–2.5 kbar, corresponding to depths of 7–8 km. Comparison of apparent P–T conditions on both sides of the Larder Lake – Cadillac break, a regional CO2-metasomatized fault zone that is spatially associated with many Archaean gold deposits, provides an upper limit of not more than c. 1 km for post-metamorphic south-side-up, dip-slip displacement.

Notes: CO2–CH4 fluid inclusions are present in anatectic layer-parallel leucosomes from graphite-bearing metasedimentary rocks in the Skagit migmatite complex, North Cascades, Washington. Petrological evidence and additional fluid inclusion observations indicate, however, that the Skagit Gneiss was infiltrated by a water-rich fluid during high-temperature metamorphism and migmatization.CO2-rich fluid inclusions have not been observed in Skagit metasedimentary mesosomes or melanosomes, meta-igneous migmatites, or unmigmatized rocks, and are absent from subsolidus leucosomes in metasedimentary migmatites. The observation that CO2-rich inclusions are present only in leucosomes interpreted to be anatectic based on independent mineralogical and chemical criteria suggests that their formation is related to migmatization by partial melting. Although some post-entrapment modification of fluid inclusion composition may have occurred during decompression and deformation, the generation of the CO2-rich fluid is attributed to water-saturated partial melting of graphitic metasedimentary rocks by a reaction such as biotite + plagioclase + quartz + graphite ± Al2SiO5+ water-rich fluid = garnet + melt + CO2–CH4. The presence of CO2-rich fluid inclusions in leucosomes may therefore be an indication that these leucosomes formed by anatexis.Based on the inferences that (1) an influx of fluid triggered partial melting, and (2) some episodes of fluid inclusion trapping are related to migmatization by anatexis, it is concluded that a free fluid was present at some time during high-temperature metamorphism. The infiltrating fluid was a water-rich fluid that may have been derived from nearby crystallizing plutons. Because partial melting took place at pressures of at least 5 kbar, abundant free fluid may have been present in the crust during orogenesis at depths of at least 15 km.

Notes: The solid-solid reaction magnesiocarpholite = sudoite + quartz has been bracketed between 350 and 500°C, 6.3 and 7.8 kbar. Because it is impossible to synthesize end-member sudoite, all experiments were carried out using natural minerals as starting materials. Although mineral compositions were very close to those of the end-members, the effect of the fluorine content in carpholite was significant. Particularly in those experiments where sudoite grows at the expense of carpholite, electron microprobe analysis of the run products shows that a more stable F-rich carpholite crystallizes too, and consumes the fluorine released in solution by the breakdown of the original carpholite.Our experimental results are combined, through a thermodynamic analysis, with a previous data set and with previous experimental data concerning the relative stability of chlorite, talc and magnesiocarpholite with excess of quartz and water as a function of P–T and AlAl(SiMg)-1 substitutions in phyllosilicates. This allows us to constrain the feasible thermodynamic parameters (H°f, sud; S° sud) and (H°f,car; S°car) for the Mg end-members. Using the partition coefficients calculated from natural parageneses, we have computed a petrogenetic grid for the system FeO–MgO–Al2O3–SiO2–H2O. It demonstrates that parageneses involving sudoite and carpholite can be used as indicators of P–T conditions, up to 600° C, 8 kbar for sudoite, and at higher pressure for carpholite.

Notes: Regional-scale mapping of index-mineral isograds in mafic units of the early Proterozoic Cape Smith Thrust Belt (northern Québec) has revealed contrasting pressure-temperature regimes associated with two distinct structural domains. In the southern domain, crustal thickening was accomplished by early, piggy-back thrust faults. Isograds cross-cut the thrusts, indicating that thermal-peak mineral growth outlasted deformation associated with early imbrication. Mineral zones are: (1) actinolite (Act) + albite (Alb); (2) hornblende (Hbl) + Act + Alb; (3) Hbl + Act + oligoclase (Oli); (4) Hbl + Oli; and (5) garnet (Grt) or clinopyroxene + Hbl + Oli-andesine. The oligoclase isograd occurs at higher grade than the hornblende isograd, a sequence typical of medium-pressure terranes (5–7 kbar). An Hbl-Alb bathograd. calibrated from mixed-volatile equilibria in the NCMASH-CO2 model system, suggests minimum pressures of about 5.4 kbar.Metamorphism in the northern domain was a consequence of re-imbrication, by means of out-of-sequence thrust faults active during and after peak metamorphic conditions. Mineral growth was coeval with thrusting, as documented by the syn-kinematic garnet porphyroblasts. Compared to the southern domain, a different sequence of isograds in mafic rocks shows that the albite-oligoclase transition takes place in the garnet zone. Based on thermobarometry in garnet-hornblende rocks, the oligoclase isograd occurs in a temperature range of 525–600°C, typical of high-pressure terranes (7–10 kbar). Calibrated bathograds for the Hbl-Ms-Alb and Grt-Alb bathozonal assemblages, respectively in the KNCMASH-CO2 and NCMASH model systems, indicate minimum pressures in the northern domain of 6.7 and 8.5 kbar. Higher-pressure series for this domain are explained by out-of-sequence thrusts exposing deeper crustal levels. For similar structural levels, only minor amounts of syn-deformational uplift (1–2 kbar and 50–75°C) are recorded in metabasites of this domain, compared to results in adjacent metapelites of the area (essentially isothermal uplift of 3–5 kbar).RESUME La bande du Cap Smith (nord du Québec) est une ceinture de chevauchement d'ǎge protérozoique inférieur, dominée par des roches mafiques. La cartographie d'isogrades à minéraux indicateurs dans les unités mafiques de la ceinture a révelé deux régimes contrastes de pression–température, chacun associéà des épisodes distincts d'épaississement crustal. Dans le domaine sud, des failles de chevauchement en-série sont responsables pour l'empilement tectonique. Les isogrades recoupent les failles, indiquant que l'apogée thermale a suivi l'emplacement initial des nappes de charriage. Les zones minérales sont: (1) actinote (Act) + albite (Alb); 2) hornblende (Hbl) + Act + Alb; (3) Hbl + Act + oligoclase (Oli); 4) Hbl + Oli; et (5) grenat (Grt) où clinopyroxene + Hbl + Oli-andésine. L'isograde d'oligoclase apparaǐt à plus haute température que l'isograde d'hornblende, une séquence typique des terrains de pressions moyennes. Un bathograde Hbl–Alb, calibréà partir d'équilibre mixte de volatiles dans le système NCMASH–CO2, suggère des pressions minimales d'environ 5.4 kbar.Le métamorphisme dans le domaine nord de la ceinture a été le résultat d'une réimbrication, causé par des chevauchements hors-série actifs pendant et après l'apogée thermale. La croissance minérale fǔt synchrone au chevauchement, documentée par des porphyroblastes de grenat syn-cinénatique. Comparé au domaine sud, une différente séquence d'isogrades dans les métabasaltes montre que la transition albite–oligoclase se situé dans la zone à grenat. Par la thermobarométrie dans les roches à grenat–hornblende l'isograde d'oligoclase se situe dans un écart de température de 525–600°C, typique des terrains de hautes pressions (7–10 kbar). Des bathogrades calibrés pour les assemblages bathozonales Hbl–Ms–Alb et Grt–Alb, rcspectivement dans les systèmes KNCMASH–CO2 et NCMASH, indique des pression minimales pour le domaine nord de 6.7 et 8.5 kbar. Une zonégraphie à plus haute pression pour ce domaine est expliquée par des chevauchements hors-série exposant des niveaux plus inférieurs de la croǔte imbriqué. Pour des niveaux structuraux similaries, des soulèvements syn-métamorphiques mineurs sont enregistrés dans les métabasaltes (1–2 kbar et 50–75°C), comparés aux métapélites adjacentes avec un soulèvement (essentially isothermal uplift of 3–5 kbar.

Notes: Mid-Cretaceous granulite gneisses crop out in a narrow belt in the Cucamonga region of the south-eastern foothills of the San Gabriel Mountains, southern California. Interlayered mafic granulites and pelitic, carbonate, calc-silicate and quartzofeldspathic metasediments record hornblende granulite subfacies metamorphism at approximately 8 kbar and 700–800°C. Regional deformation and formation of banded gneisses ceased by c. 108 Ma. although mafic-intermediate magmatism and high-grade metamorphism continued locally as late as c. 88 Ma. Garnet zoning in metapelitic gneisses suggests that peak metamorphism was followed locally by a period of near-isobaric cooling, but this interpretation requires diachronous cooling of the granulite belt which cannot be demonstrated without detailed thermo-chronological data. It is more likely that the entire terrane remained at granulite facies P–T conditions until 88 Ma, followed by rapid uplift associated with juxtaposition against adjacent middle and upper crustal arc terranes. Uplift occurred between c. 88 and 78 Ma at rates of approximately 1–2 km Ma-1. The geotectonic evolution of the Cucamonga granulites is similar to mid-Cretaceous high-P granulites in the Sierra Nevada and Salinian block of central California. Late Cretaceous uplift common to these granulites may provide an important tectonic link between dismembered Mesozoic batholithic terranes in the California Cordillera.

Notes: Livestock have been excluded from riparian zones along many streams in western North America in an effort to restore aquatic and riparian habitat degraded by livestock grazing. Within these exclosures, channel adjustment to elimination of grazing pressure may lag behind plant recovery because of the time required to deposit sediment along the vegetated banks of the stream channel. Moreover, unless grazing is eliminated from the watershed, the channel within the exclosure must still accommodate increased runoff and sediment loads from upstream. This hydrologic regime may prevent a return to predisturbance channel morphology. Cross sections of the North Fork Cottonwood Creek in the White Mountains of California showed no significant difference in channel width within and downstream of a 24-year-old exclosure, despite a lush growth of stream bank vegetation that gives the impression of a narrower channel within the exclosure.

Notes: Many felids are threatened by loss of habitat, lack of genetic diversity, and over-exploitation. The reintroduction of bobcats (Felis rufus) to Cumberland Island, Georgia provided an opportunity to reintroduce a mid-sized felid without the concern for species survival that is paramount with endangered species. We captured bobcats from the coastal plain region of Georgia, briefly held them in captivity, and released them on Cumberland Island. We describe and evaluate the protocols and techniques used to accomplish the reintroduction. Future reintroductions of felids should consider the problem of post-release dispersal, although our island was relatively isolated and inhibited dispersal. Also, any reintroduction effort should invest effort and resources into post-release monitoring of the population. Empirical knowledge about the effects of spatial distribution, genetics, population dynamics, especially mechanisms of population regulation, behavior, and environmental conditions on the viability of populations is critical to the conservation of endangered species. Future research of the bobcats on Cumberland Island will be able to address aspects of the population and genetic dynamics of a small, insular felid population.

Notes: We studied the use of mineland wetlands by birds and the relationship between avian communities and wetland characteristics. Data were collected from 20 wetlands in Pike County, Indiana, and included wetland size, depth, water conductivity and salinity, aquatic macroinvertebrate abundance, vegetation, and bird use. Principal component analysis showed that physical variables could be explained by two principal component scores and that wetlands could be grouped on the basis of size and conductivity. Principal component analysis could not reduce vegetation variables to fewer principal component scores, meaning that wetland vegetation characteristics were independent of one another and did not show any trend. Most wetlands had low invertebrate density, and wetlands with higher invertebrate density had low invertebrate diversity. Wetlands with similar habitat characteristics (physical, vegetative, and invertebrate) did not necessarily show similarities in bird assemblages. Bird similarity index values ranged from 0 to 59%, implying that each wetland has its own bird community. Stepwise multiple regression analysis (α= 0.05) relating bird use and habitat characteristics showed that bird species richness increased with the species richness of submergent vegetation and was correlated negatively with the species richness of emergent vegetation. There was no significant relationship between bird species richness or bird species diversity and wetland size. The number of species within different avian guilds correlated with different habitat characteristics. The species richness of submergent plants was a factor that correlated positively with the number of species of several guilds (dabblers, wading birds, and plunge divers). Wetland age was not a factor that determined bird use.

Notes: Grass seeding is widely used for erosion control, but its consequences for soil and regeneration following fire have been measured only infrequently. This study investigates the effect of grass seeding on the type and extent of plant cover; soil moisture percentage; and moisture stress, survival, growth, and root-tip and mycorrhiza formation of Pinus lambertiana (sugar pine) seedlings in a clearcut intensely burned by wildfire. One-year-old containerized sugar pine seedlings were planted in seeded and nonseeded areas in Spring 1988 and 1989 in the Longwood Fire area of southwest Oregon. In 1988, tree seedlings in grass-seeded plots experienced intense competition from the grass, reduced root-tip and mycorrhiza formation, low levels of soil moisture to meet evapotranspirational demand, high levels of mortality, and reduced growth. In 1989, however, the opposite was true: tree seedlings in nonseeded plots experienced competition from invading native annuals and perennials, low levels of soil moisture in summer, and higher levels of mortality. The studies we report here further indicate that, in an area characterized by extended summer drought, annual ryegrass impeded regeneration of sugar pine during the first season following the fire. Native species cover and richness have been significantly reduced in the seeded area and may affect long-term soil stability, productivity, and conifer restoration. Seeding of annual ryegrass at high rates under these conditions would seem ill advised.

Notes: Books reviewed in this article: Reintegrating Fragmented Landscapes towards Sustainable Production and Nature Conservation. R. J. Hobbs and D. A. Saunders. editors Restoring Acid Waters: Loch Fleet 1984–1990. G. Howels, and T.R.K. Dalziel, editors

Notes: In prairie restoration, use of seeds from nonlocal sources has been of concern to restorationists. We examined the specificity between vesicular-arbuscular mycorrhizal fungi obtained from a single location and little bluestem obtained from three localities. Seed was obtained from three sources: (1) a commercial seed supplier in Nebraska, (2) Sand Ridge State Forest (SRSF), Mason County, Illinois, the site from which the experimental soil containing the mycorrhizal inoculum was obtained, and (3) Sand Prairie Scrub Oak Nature Preserve (SPSO), 32 km southwest of SRSF. Plants were grown in three substrates: (1) autoclaved soil, (2) autoclaved soil to which a mycorrhizal fungal-free sieving of nonautoclaved soil was added, and (3) nonautoclaved soil. All plants grown in nonautoclaved soil were colonized by mycorrhizal fungi, whereas none of those grown in other substrates were colonized. Plants grown from SRSF seeds produced significantly (p 〈 0.05) more biomass than those grown from Nebraska seeds (X̄± SE, SRSF = 0.54 ± 0.04 g, SPSO = 0.49 ± 0.03 g, Nebraska = 0.37 ± 0.03 g). Plants grown in nonautoclaved soil, regardless of seed source, produced less biomass (0.27 ± 0.02 g) than plants grown in autoclaved soil (0.58 ± 0.03 g) or autoclaved soil plus sievings (0.59 ± 0.03 g).The results provide no clear indication of a host-endophyte specificity. However, the data suggest that the local genotypes of S. scoparium are better adapted to their native soil environment than are genotypes from other localities.

Notes: Glasshouse trials, using trickle irrigation and increasing levels of NaOH-induced alkalinity, identified species that could be expected to tolerate the high-pH conditions of bauxite processing waste residue sites. Of 29 taxa tested, the most tolerant were Casuarina obesa, Melaleuca lanceolata, M. armillaris, M. nesophila, Eucalyptus loxophleba, E. halophila, E. platypus, Tamarix aphylla, and a particular clone of E. camaldulensis; E. spathulata, E. tetragona, E. preissiana, E. gomphocephala, E. diptera, and E. occidentalis proved to be relatively sensitive to severe alkaline conditions. Tolerance appeared to relate to an ability to maintain root membrane function, nutrient uptake balance, and ultimately root tissue structure while under increasing levels of alkalinity stress. Species normally inhabiting alkaline soils tended to have increased growth rates in nutrient irrigation conditions between pH 8 and 10 compared with control plants irrigated with nutrient solutions of pH values near 7.4. However, once the irrigation solutions reached pH 12 and the buffering capacity of the soil appeared to be exceeded, the condition of susceptible plants rapidly declined and death followed. Sensitive plants initially showed symptoms related to nutrient deficiency, followed by wilting and death as the root systems failed. Field trial conditions in the bauxite residue impoundments at Kwinana, Western Australia, include soils with pH values as high as 11.00. In general, the relative survival and growth of seedlings after eight months were predicted by the response under glasshouse trial conditions. Appropriately designed stress trials can be important ecological techniques in choosing species most capable of surviving difficult environmental conditions in the rehabilitation of damaged landscapes.

Notes: In ecological restoration, nonindigenous species can pose a major problem because they are often aggressive and can overwhelm native species, thus altering ecosystem structure. This article identifies the circumstances in which prospects for use of restoration technology in controlling invaders are favorable or unfavorable, the factors that make certain species good colonizers, and the characteristics that make ecosystems susceptible to invasion. It discusses prospects for using restoration technology in controlling nonindigenous species by influencing hydroperiod, photo-period, thermoperiod, edaphic conditions, and availability of biological control agents so as to produce ecological conditions that are inhospitable to invaders. The limitations of restoration are discussed, as well as specific ecological situations in which it is likely to be the method of choice for control of nonindigenous species. Use of fire, flooding, manual removal, shading, substrate removal, and herbicide application as control techniques in conjunction with restoration efforts are considered. Specific examples, including the techniques employed, indicate the potential for controlling nonindigenous species in the process of ecosystem restoration.

Notes: Adequately evaluating the success of coastal tidal marsh restoration has lagged behind the actual practice of restoring tidally restricted salt marshes. A Spartina-dominated valley marsh at Barn Island Wildlife Management Area, Stonington, Connecticut, was tidally restricted in 1946 and consequently converted mostly to Typha angustifolia. With the re-introduction of tidal flooding in 1978, much of the marsh has reverted to Spartina alterniflora. Using a geographical information system (GIS), this study measures restoration success by the extent of geographical similarity between the vegetation of the restored marsh and the pre-impounded marsh. Based on geographical comparisons among different hydrologic states, pre-impounded (1946), impounded (1976), and restored (1988) tidal marsh restoration is a convergent process. Although salt marsh species currently dominate the restored system, the magnitude of actual agreement between the pre-impounded vegetation and that of the restored marsh is only moderate. Further restoration of the salt marsh vegetation may be limited by continued tidal restriction, marsh surface subsidence, and reduced accretion rates. General trends of recovery are identified using a gradient approach and the geographic pattern’ of vegetation change. In the strictest sense, if restoration refers only to vegetation types that geographically replicate preexisting types, then only 28% of the marsh has been restored. Restoration in a broader sense, however, representing the original salt marsh vegetation regardless of spatial position, amounts to 63% restored. Unrestored marsh, dominated by Typha angustifolia and Phragmites australis, remains at 37%. By emphasizing trends during vegetation recovery, this evaluation technique aims to understand the restoration process, direct future research goals, and ultimately aid in future restoration projects.

Notes: Books reviewed in this article: The Earth in Transition: Patterns and Processes of Biotic Impoverishment. A collection of papers from a symposium held in Woods Hole, Massachusetts, October 1986. George M. Woodwell, editor Restoration of Aquatic Ecosystems: Science, Technology, and Public Policy. National Research Council.

Notes: Results are presented using vegetative shoots and bryophyte sods to restore floristically impoverished high arctic wet sedge-moss meadows that had suffered intense damage from vehicle activity during the period 1960–1967. Clonal transplants of Carex aquatilis var. stans, a native sedge, were planted with and without bryophyte sods in vehicle ruts in 1972. After nearly two decades, there was less Carex cover in the planted ruts with flowing water than in the contiguous controls. This pattern was slightly reversed in planted plots with standing water. Reinvasion of Eriophorum angustifolium occurred in treated ruts, but cover was less in both treatments than in controls in 1990. The unexpected recruitment of Eriophorum scheuchzeri from the seed bank in moss-sodded plots is discussed in terms of its local and regional importance. Total plant cover in restored ruts was nearly equal to that of controls, but biomass was somewhat less than that in control plots. Plots with bryophytes were environmentally distinct, due primarily to increases in organic mat depth relative to controls. After 18 years, restoration efforts resulted in increased plant cover in treated ruts compared to naturally recovering ruts.〈blockFixed type="quotation"〉The composition of no two patches of vegetation is precisely the same [and] neither are the seed banks. Successsion on different patches of disturebed ground in the same locality frequently proceeds quite differently because of such differences.—J. Miles, Vegetation Dynamics, 1979

Notes: In markets, in which exchange requires costly search for trading partners, intermediaries can help to reduce the trading frictions. This intuition is modeled in a framework with heterogeneous agents, who have the choice between intermediated exchange and search accompanied by some bargaining procedure. The equilibria of such a game are characterized. In the case of a monopolistic intermediary, the tradeoff between the bid-ask spread and the costs of delay during private search determine the intermediary's clientele. In equilibrium the monopolist charges a positive spread. Traders with large gains from trade prefer to deal with him, whereas traders with relatively low gains from trade engage in search. In case of competition among intermediaries, the classical Bertrand result obtains, and bid and ask prices converge to the (unique) Walrasian equilibrium price. Thus, in the confines of the model, the Walrasian auctioneer of the market under consideration can be replaced by competing intermediaries. In addition a multiplicity of subgame perfect Nash equilibria emphasizes the coordination problems inherent in models of intermediation.

Notes: In this paper we analyze the properties of price equilibria in a duopoly market where firms sell vertically differentiated products, consumers being uncertain about which firm sells which quality. Both existence and properties of price equilibria are characterized by the beliefs of the consumers' population about the distribution of quality between firms.

Notes: The survey classifies economic theories of the firm into four categories based on the level of aggregation in economic models: (1) neoclassical, (2) industrial organization, (3) contractual, and (4) organizational incentive. Economic theories of the firm are evaluated on the basis of their potential application to problems of management decision making. The survey suggests that a management perspective can be useful in developing an integrated theoretical analysis of the firm that addresses both competitive strategy and organizational design.

Notes: Commitment: The Dynamic of Strategy, by Pankaj Ghemawat.Ghemawat's Commitment makes recent results in game-theoretic industrial organization accessible and useful to practitioners in the field of strategic management. This book contributes to the management strategy literature on two levels. On a conceptual level, Ghemawat strives to isolate “commitment” as the sole explanation of persistent differences in firm performance. On a more pragmatic level, he provides a framework intended to aid managers in making commitment-intensive decisions. It is with respect to how well he achieves these two distinct goals that I evaluate Ghemawat's contribution. In addition, I review briefly the book's content, and I compare Ghemawat's approach to some alternative approaches familiar to scholars and practitioners of strategic management.

Notes: In the present paper, we relate the extent of job security offered to incumbent managers to the extent of competition among firms in the product market, where the extent of job security is measured by the probability that an incumbent manager continues to be employed by his current firm and the extent of competition is measured by the degree of differentiation between competing brands. We demonstrate that when competition between firms intensifies and “on-the-job training” is relatively more conducive to reducing the variable costs of production, firms tend to offer reduced (increased) job security to incumbent managers, provided that the degree of differentiation between competing products is sufficiently large (small), respectively. If “on-the-job training” is relatively more conducive to reducing the fixed costs of production, however, the previous result is reversed.

Notes: This paper presents a model of strategic product choice when consumer preferences combine features of both horizontal and vertical product differentiation. Consumers disagree on what amount of a “special” characteristic makes for a better product, but those who prefer more of this attribute are willing to pay more for it. Within this demand structure, I examine the advantages of first-mover firms. I find that such firms typically do best in markets where the maximum degree of product differentiation is limited by preferences rather than technology. These are “niche markets”. Follower firms do better in markets in which the range of preferences is broad relative to the span of feasible goods.

Notes: This paper reexamines Grossman and Hart's (1980) insight into how the free-rider problem excludes an external raider from capturing the increase in value it brings to R firm The inability of the raider to capture any of the surplus depends critically on the assumption of equal and indivisible shareholdings–the one-share-per-shareholder model In contrast, we show that once shareholdings are large and potentially unequal, a raider may capture a significant part of the increase in value Specifically, the free-rider problem does not prevent the takeover process when shareholdings are divisible.

Notes: We analyze the implementation problem faced by firms when trying to collude in the face of asymmetric information about costs. Assuming that transfer payments are possible, we examine the incentive compatibility and individual rationality constraints that must be satisfied by any cartel agreement. Two scenarios are considered. Firms may or may not withdraw from the agreement after each firm's costs become known. If no withdrawal is possible, we find that the monopoly rule is implementable when weak types of individual rationality constraints are required. This contrasts with some results in the literature. If withdrawal is possible, we find a potential conflict between different forms of individual rationality constraints, in particular, between interim and ex post constraints. This conflict disappears in industries with a large number of firms.

Notes: This paper offers a general characterization of the optimal product line prices for a monopolist whose quality of products is initially unknown to consumers. In the focal equilibrium, a monopolist signals a high-quality product line by pricing as if quality were known to be high, but costs of production were higher than they truly are. In a rich set of environments, this characterization implies that the prices of all products are initially distorted upward, with the price distortion being largest for products with the most inelastic demands and/or quality-sensitive production costs. These implications yield predictions for the time path of prices flint are broadly consistent with evidence from the marketing literature. The multidimensional signaling problem is made tractable by the satisfaction of a very simple and powerful single crossing property.

Notes: Managerial behavior that is rational and profit-maximizing sometimes will seem to be overly conservative. If the valuation of innovations contains white noise and the status quo would be preferred to random innovation, then any innovation that does not appear substantially better than the status quo should be rejected, for reasons arising from regression toward the mean. The more successful the firm, the higher is the optimal acceptance threshold and conservative bias. Other things equal, more successful firms will spend less on research, adopt fewer innovations, and be less likely to advance the industry's best practice.

Notes: A number of recent Canadian and U.S. antitrust cases have involved allegations that manufacturers of durable products have refused to supply parts to independent service organizations, apparently to monopolize the market for repairs of their products. This paper provides a theory of these strategies and considers the welfare implications of judicial orders to supply. The refusals here are seen as necessary to protect manufacturers' program of price discrimination: Expensive repairs represent a way to select high-intensity, high-value users and charge them more. In addition to the usual ambiguity associated with the welfare effects of prohibitions of price discrimination, forcing competition in repairs can have the further damaging effect of reducing social welfare by inducing manufacturers to lower product quality.

Notes: The litigation crisis in this country is a subject of great importance to the chief executive officers of public uccounting firms. 1 will first address the problem's magnitude and its source and then speculate on the developments we might expect in the future. Like all forecasts, mine will certainly be wrung. I hope that my degree of error on the pessimistic side will be considerable.

Notes: Research and development (R&D) competition among firms has recently been extended to R&D competition involving research joint ventures. It was previously shown that in an industry conducting cost-reducing R&D followed by competition in the product market, if all firms both fully share R&D information and coordinate investments to maximize pint profits, final products prices are lower, and firms' profits are higher than with information shriving alone, joint profit maximization alone, or no cooperation. In this paper we question whether a single research joint venture (RJV) cartel is the best form of industry R&D coordination. We show that there are circumstances in which splitting a single RJV cartel into several competing ones yields lower product prices. Moreover, we show that in these circumstances, splitting the industry into exactly two competing RJV cartels would be best.

Notes: This paper studies the order of adoption of a process innovation, thin-slab casting, by U.S. steel makers. A game-theoretic model of technology adoption with capacity constraints indicates that incumbents are likely to trail entrants in adopting process technologies that reduce the minimal scale required to compete. Evidence from the case study also indicates, however, that the sorts of interactive effects emphasized by game-theoretic models may be dominated by the effects of competitors' heterogeneous precommitments.

Notes: Identical cases of wine are often auctioned one immediately after another. Ashenfelter (1989) reports that on average, the later lots fetch less. Such a systematic price difference seems anomalous, the more so because it is shown here that rational expectations imply not equal, but rising, prices. Risk aversion is an obvious way of reconciling the evidence with rational behavior. There is an alternative explanation. The auctions observed by Ashenfelter involved a buyer's option, whereby the first-round winner could purchase further cases at the same price. It is shown that this feature may both account for the observed price trajectory and raise seller revenue.

Notes: This paper examines the incentives for integration when the market for consumer durables (hardware) is oligopolistic and the market for complementary services (software) is monopolistically competitive. We find that the equilibrium industry structure will depend on the magnitude of the fixed costs of software development. If the software development costs are relatively large, the equilibrium industry structure is unintegrated, that is, neither hardware firm integrates; if the software development costs are relatively small, the equilibrium industry structure is integrated, that is, both hardware firms integrate. Under the integrated industry structure, hardware profits are lower, less varieties are provided, and hardware prices are lower than under the unintegrated industry structure. The game has a prisoners' dilemma structure when the software development costs are relatively small because of a foreclosure effect. Strategically increasing the number of software varieties provides an avenue for an integrated hardware firm to increase its market share and profits by reducing the number of software varieties available for an unintegrated rival technology. Although consumer surplus is higher under an integrated industry structure, the total surplus associated with the unintegrated industry structure exceeds that of the integrated industry structure.

Notes: Price setting by firms and search by customers is analyzed, relaxing two basic attributes of most search models: price precommitment and agent heterogeneity. Customers are characterized by individual demand functions for a homogeneous good and can choose to employ a threat to search. Firms noncooperatively make pricing decisions by using the individual demand curves under conditions of constant marginal cost. Firms adopt pricing rules that optimally respond to customer search histories. Bargaining power is endogenously assigned. Firms know their common marginal cost; customers, the cost distribution. The unique separating equilibrium is characterized by a lumpy distribution of prices and by heterogeneous shopping behavior by customers giving rise to “shoppers” and “nonshoppers”

Notes: Most research on product positioning supports the idea of differentiation. Product standardization (i.e., minimum differentiation) occurs only under very limiting assumptions. Yet, similar products are often observed in the marketplace. We attempt to restore the case for standardization by using more realistic assumptions than in previous work. We assume that consumers consider not only observable attributes in brand choice, but also attributes that are unobservable by the firms. We find that standardization is an equilibrium when consumers exhibit sufficient heterogeneity along the unobservable attributes under both positioning with exogenously given prices and price competition, We also show that, under insufficient heterogeneity along the unobservable attribute, our results coincide with past research that argues in favor of differentiation.

Notes: This paper proposes an empirical methodology for studying various (implicit or explicit) collusive behaviors on two strategic variables, which are price and advertising, in a differentiated market dominated by a duopoly. In addition to Nash or Stackelberg behaviors, we consider collusion on both variables, collusion on one variable and competition on the other, etc. Using data on the Coca-Cola and Pepsi-Cola markets from 1968 to 1986, full information maximum likelihood estimation of cost and demand functions are obtained allowing for various collusive behaviors. The collusive hypothesis is not rejected, and the best form of collusive behavior is selected via nonnested testing procedures. Using the best model, Lerner indices are computed for both duopolists to provide summary measures of market power. Finally, our approach is contrasted with the conjectural variation approach and is shown to give superior results.

Notes: Abstract The enthalpy of reaction of plagioclase and pyroxene to produce garnet and quartz has been a major source of error in granulite geobarometry because of relatively uncertain enthalpy values available from high-temperature solution calorimetry and compiled indirectly from experimental phase equilibria. Recent, improved calorimetric measurements of ΔHR are shown to yield palaeopressures which are internally consistent between orthopyroxene and clinopyroxene calibrations for many South Indian granulites from the Archaean high-grade terranes of southern Karnataka and northern Tamil Nadu. This represents a considerable improvement over previous calibrations, which gave disparate results for the two independent barometers involving orthopyroxene and clinopyroxene, requiring a 2-kbar ‘empirical adjustment’to force agreement.Palaeopressures thus calculated for 30 well-documented two-pyroxene garnet granulites from South India give internally consistent pressures with a mean of 8.1°1.1 kbar at 750°C, consistent with the presence of both kyanite and sillimanite in many areas. Those samples for which garnet–pyroxene exchange thermometers give plausible granulite-range temperatures and whose minerals are minimally zoned give the best agreement of the two barometers. Samples which yield low palaeotemperatures and different rim and core compositions of minerals yield pressures for the orthopyroxene assemblage as much as 2 kbar lower than for the assemblage with clinopyroxene. This disparity probably represents post-metamorphic-peak re-equilibration. We conclude that considerable confidence may be placed in geobarometry of two-pyroxene granulites where apparent palaeotemperatures are in the granulite facies range (〉700°C) and where mineral zonation is minimal. Of the several possible sets of activity–composition relations in use, those constructed from analysis of phase equilibria give slightly higher palaeopressures and appear more consistent with analytical data from the Nilgiri Hills uplift, where kyanite is the only aluminium silicate reported to be stable in peak-metamorphic assemblages. The present results support a palaeopressure gradient, increasing generally from south to north, across the Nilgiri Hills as inferred by previous geobarometry.

Notes: Abstract A major episode of continental crust formation, associated with granulite facies metamorphism, occurred at 2.55–2.51 Ga and was related to accretional processes of juvenile crust. Dating of tonalitic–trondhjemitic, granitic gneisses and charnockites from the Krishnagiri area of South India indicates that magmatic protoliths are 2550–2530 ± 5 Ma, as shown by both U–Pb and 207Pb/206Pb single zircon methods. Monazite ages indicate high temperatures of cooling corresponding to conditions close to granulite facies metamorphism at 2510 ± 10 Ma. These data provide precise time constraints and Sr–Nd isotopes confirm the existence of late tonalitic–granodioritic juvenile gneisses at 2550 Ma. Pb single zircon ages from the older Peninsular gneisses (Gorur–Hassan area) are in agreement with some previous Sr ages and range between 3200 ± 20 and 3328 ± 10 Ma. These gneisses were derived from a 3.3–3.5-Ga mantle source as indicated from Nd isotopes. They did not participate significantly in the genesis of the 2.55-Ga juvenile magmas. All these data, together with previous work, suggest that the 2.51-Ga granulite facies metamorphism occurred near the contact of the ancient Peninsular gneisses and the 2.55–2.52-Ga ‘juvenile’tonalitic–trondhjemitic terranes during synaccretional processes (subduction, mantle plume?). Rb–Sr biotite ages between 2060 and 2340 Ma indicate late cooling probably related to the dextral major east–west shearing which displaced the 2.5-Ga juvenile terranes toward the west.

Notes: Abstract The formation of spiral-shaped inclusion trails (SSITs) is problematical, and the two viable models for their formation involve opposite shear senses along the foliation in which the porphyroblasts are growing. One model argues for porphyroblast rotation, with respect to a geographically fixed reference frame, whereas the other argues for no such porphyroblast rotation, but instead rotation of the matrix foliation around the porphyroblast. Thus, porphyroblasts with SSITs cannot be used as shear-sense indicators until it is conclusively determined which model best explains them.Any successful model must explain features associated with SSITs, including: (1) foliation truncation zones, (2) smoothly curving SSITs, (3) millipede microstructure, (4) total inclusion-trail curvature in median sections, (5) porphyroblasts with SSITs that have grown together, (6) evidence for relative porphyroblast displacements, (7) shear-sense indicators inside and outside porphyroblasts; (8) crenulations associated with porphyroblasts and (9) geometries in sections subparallel to spiral axes (axes of rotation). A detailed study of these features suggests that most, if not all, can be explained by both the rotational and non-rotational models, in spite of these models involving diametrically opposed movement senses. Therefore, geometrical analysis of individual porphyroblast microstructures may not determine which model best explains SSITs until the kinematics required to form these microstructures are better understood, in particular the sense of shear along a developing crenulation cleavage. Specific tests for determining the shear sense along crenulation cleavages are proposed, and results of such tests may conclusively resolve the debate over how SSITs form.

Notes: Abstract The Mesozoic Murihiku and Waipapa terranes are two accretionary wedges of linked forearc and trench sediments, respectively, that were juxtaposed in the early Cretaceous.Late Triassic to late Jurassic Murihiku terrane volcaniclastic sediments are folded into a regional syncline and have been diagenetically altered. There is a general relationship between zeolite occurrence, clay mineralogy, vitrinite reflectance and stratigraphic position. Youngest Jurassic sediments contain heulandite, analcime and stilbite, whereas late Triassic to mid-Jurassic sediments have laumontite and heulandite (in detail the zeolite distribution is complicated). Tuffaceous horizons on the eastern limb of the syncline are calcitized rather than zeolitized. Post-diagenetic fractures associated with uplift are laumontite-filled. The inferred geothermal gradient is c. 15° C km−1.The Waipapa terrane is an accretionary complex dominated by imbricated terrigenous sediments of Triassic and Jurassic age with enclosed Permian to Jurassic pelagic sediments and basalts. Late Jurassic sediments are massive volaniclastic sandstones. The sediments are non-foliated, and metamorphic minerals in the massive sandstones have crystallized in specific domains. The observed metamorphic succession of prehnite-pumpellyite and pumpellyite-actinolite facies assemblages was overprinted in the imbricated rocks during a thermal event that was late in the deformation sequence and broadly coincident with hydraulic fracturing and veining.The metamorphic successions in the two terranes and their relationships to structural features are in excellent accord with accretionary complex models.

Notes: Abstract The Siluro-Devonian Waits River Formation of north-east Vermont was deformed, intruded by plutons and regionally metamorphosed during the Devonian Acadian Orogeny. Five metamorphic zones were mapped based on the mineralogy of carbonate rocks. From low to high grade, these are: (1) ankerite-albite, (2) ankerite-oligoclase, (3) biotite, (4) amphibole and (5) diopside zones. Pressure was near 4.5kbar and temperature varied from c. 450° C in the ankerite-albite zone to c. 525° C in the diopside zone. Fluid composition for all metamorphic zones was estimated from mineral equilibria. Average calculated χco2[= CO2/(CO2+ H2O)] of fluid in equilibrium with the marls increases with increasing grade from 0.05 in the ankerite-oligoclase zone, to 0.25 in the biotite zone and to 0.44 in the amphibole zone. In the diopside zone, χCO2 decreases to 0.06.Model prograde metamorphic reactions were derived from measured modes, mineral chemistry, and whole-rock chemistry. Prograde reactions involved decarbonation with an evolved volatile mixture of χCO2 〉 0.50. The χCO2 of fluid in equilibrium with rocks from all zones, however, was generally 〈0.40. This difference attests to the infiltration of a reactive H2O-rich fluid during metamorphism. Metamorphosed carbonate rocks from the formation suggests that both heat flow and pervasive infiltration of a reactive H2O-rich fluid drove mineral reactions during metamorphism. Average time-integrated volume fluxes (cm3 fluid/cm2 rock), calculated from the standard equation for coupled fluid flow and reaction in porous media, are (1) ankerite-oligoclase zone: c. 1 × 104; (2) biotite zone: c. 3 × 104; (3) amphibole zone: c. 10 × 104; and diopside zone: c. 60 × 104. The increase in calculated flux with increasing grade is at least in part the result of internal production of volatiles from prograde reactions in pelitic schists and metacarbonate rocks within the Waits River Formation.The mapped pattern of time-integrated fluxes indicates that the Strafford-Willoughby Arch and the numerous igneous intrusions in the field area focused fluid flow during metamorphism. Many rock specimens in the diopside zone experienced extreme alkali depletion and also record low χCO2. Metamorphic fluids in equilibrium with diopside zone rocks may therefore represent a mixture of acid, H2O-rich fluids given off by the crystallizing magmas, and CO2-H2O fluids produced by devolatilization reactions in the host marls. Higher fluxes and different fluid compositions recorded near the plutons suggest that pluton-driven hydrothermal cells were local highs in the larger regional metamorphic hydrothermal system.

Notes: Abstract Natural, pure CO2 inclusions in quartz and olivine (c. Fo90) were exposed to controlled fH2 conditions at T= 718–728°C and Ptotal= 2 kbar; their compositions were monitored (before and after exposures) by microsampling Raman spectroscopy (MRS) and microthermometry. In both minerals exposed at the graphite–methane buffer (fH2= 73 bar), fluid speciations record the diffusion of hydrogen into the inclusions. In quartz, room-temperature products in euhedral isolated (EI type) inclusions are carbonic phases with molar compositions of c. CO2(60) + CH4(40) plus graphite (Gr) and H2O, whereas anhedral inclusions along secondary fractures (AS type) are Gr-free and contain H2O plus carbonic phases with compositions in the range c. CO2(60) + CH4(40) to CO2(10) + CH4(90). EI type inclusions in olivine evolved to c. CO2(90–95) + CH4(5–10) without Gr, whereas AS type inclusions have a range of compositions from CO2(90) + CH4(10) ± Gr to CH4(50) + H2(50) ± Gr; neither H2O nor any hydrous species was detected by optical microscopy or MRS in the olivine-hosted products. Differences in composition between and among the texturally distinct populations of inclusions in both minerals probably arise from variations in initial fluid densities, as all inclusions apparently equilibrated with the ambient fH2. These relations suggest that compositional variability among inclusions in a given natural sample does not require the entrapment of multiple generations of fluids. In addition, the absence of H2O in the olivine-hosted inclusions would require the extraction of oxygen from the fluids, in which case re-equilibration mechanisms may be dependent on the composition and structure of the host mineral.Many of the same samples were re-exposed to identical P–T conditions using Ar as the pressure medium, yielding ambient fH2= 0.06 bar. In most inclusions, the carbonic fluids returned to pure CO2 and graphite persisted in the products. Reversal of the mechanisms from the prior exposure at fH2= 73 bar did not occur in any inclusions but the AS types in olivine, in which minor CO2 was produced at the expense of CH4 and/or graphite. The observed non-reversibility of previous mechanisms may be attributed to: (1) slower fluid–solid reactions compared to reactions in the homogeneous fluid phase; (2) depressed activities of graphite due to poor ordering; and/or (3) low ambient fO2 at the conditions of the second run.

Notes: The Whitestone Anorthosite (WSA), located in southern Ontario, underwent granulite facies metamorphism during the Grenville orogeny at 1.16 Ga. During the waning stages of metamorphism fluids infiltrated the outer portions of the anorthosite and promoted the formation of an envelope comprised of upper amphibolite facies mineral assemblages. Also, this envelope corresponds to portions of the anorthosite that underwent deformation related to movement along a high-grade ductile shear zone. Samples from this portion of the anorthosite (the margin) contain CO2-rich inclusions in plagioclase porphyroclasts (relict igneous phenocrysts), matrix plagioclase and garnet. These inclusions have features which normally are interpreted as indicating that they are texturally primary, but they have relatively low CO2 densities (0.61–0.95 g cm-3). Plagioclase from the anorthosite interior contains texturally secondary inclusions with relatively high CO2 densities (generally from 0.99 to 1.10 g cm-3). The high CO2 densities suggest that the inclusions in the plagioclase of the anorthosite core formed prior to inclusions in porphyroclast minerals of the outer portions of the anorthosite, an interpretation that is apparently inconsistent with inclusion textures. This apparent paradox indicates that most fluid inclusions from the anorthosite margin were formed during, or were modified by, the dynamic recrystallization that affected this portion of the WSA. In either case, late formation or modification, the texturally primary fluid inclusions do not contain pristine samples of the peak metamorphic fluid. Furthermore, because shear-related deformation is apparently associated with entrapment of the lowest fluid densities, some strain localization persisted to relatively low temperatures (e.g. less than approximately 500° C). These results constrain a part of the retrograde P–T path for this portion of the Grenville Orogen to temperatures of approximately 400–500° C at pressures of approximately 1–2 kbar.

Notes: A suite of metapelites, charnockites, calc-silicate rocks, quartzo-feldspathic gneisses and mafic granulites is exposed at Garbham, a part of the Eastern Ghats granulite belt of India. Reaction textures and mineral compositional data have been used to determine the P–T–X evolutionary history of the granulites. In metapelites and charnockites, dehydration melting reactions involving biotite produced quartzofeldspathic segregations during peak metamorphism. However, migration of melt from the site of generation was limited. Subsequent to peak metamorphism at c. 860° C and 8 kbar, the complex evolved through nearly isothermal decompression to 530–650° C and 4–5 kbar. During this phase, coronal garnet grew in the calc-silicates, while garnet in the presence of quartz broke down in charnockite and mafic granulite. Fluid activities during metamorphism were internally buffered in different lithologies in the presence of a melt phase. The P–T path of the granulites at Garbham contrasts sharply with the other parts of the Eastern Ghats granulite belt where the rocks show dominantly near-isobaric cooling subsequent to peak metamorphism.

Notes: Staurolite porphyroblasts, 1.5–8cm in length and 0.3–2cm in width, in the Littleton Schist at Bolton, Connecticut, contain curved quartz inclusion trails which document synkinematic rotations of at least 135°. The orientations of long axes of these staurolite crystals define a weak preferred orientation in a plane approximately parallel to the external foliation. Serial sections of four differently orientated crystals and U-stage measurements of the orientations of their inclusion trails demonstrate that the inflection hinge line and the statistical ‘symmetry axis’ characterizing the foliation within a porphyroblast are unrelated to the orientations of external crenulations and are, in all cases, parallel to the long axis of the porphyroblast. The cumulative rotation reflected in the curvature of the inclusion trails is a maximum in a c-axis section through the initial core of a crystal. The amount of rotation about the c-axis decreases linearly along the length of the crystal away from the nucleation site.The sense and amount of rotation recorded by a porphyroblast is related to its orientation. A tightly constrained transition from clockwise to anticlockwise rotation defines a slip direction that coincides with the preferred orientation of the staurolite c-axes. The total rotation reflected by the inclusion trails increases as a function of the angle between the c-axes of the staurolite crystals and the slip direction.Initially random staurolite porphyroblasts rotated during growth, as a consequence of laminar shear in the surrounding viscous matrix. This interpretation is quantitatively consistent with: the staurolite preferred orientation; its coincidence with the apparent slip direction; the correlation between both the sense and the amount of rotation and the orientation of the long axis of the porphyroblast; and the twisted conical shape of the family of surfaces defined by the inclusion trails.

Notes: Silica-deficient sapphirine-bearing rocks occur as an enclave within granulite facies Proterozoic gneisses and migmatites near Grimstad in the Bamble sector of south-east Norway (Hasleholmen locality). The rocks contain peraluminous sapphirine, orthopyroxene, gedrite, anthophyllite, sillimanite, sapphirine, corundum, cordierite, spinel, quartz and biotite in a variety of assemblages. Feldspar is absent.Fe2+/(Fe2++ Mg) in the analysed minerals varies in the order: spinel 〉 gedrite ≥ anthophyllite ≥ biotite 〉 sapphirine〉orthopyroxene 〉 cordierite.Characteristic pseudomorph textures indicate coexistence of orthopyroxene and sillimanite during early stages of the reaction history. Assemblages containing orthopyroxene-sillimanite-sapphirine-cordierite-corundum developed during a high-pressure phase of metamorphism and are consistent with equilibration pressures of about 9 kbar at temperatures of 750–800°C. Decompression towards medium-pressure granulite facies generated various sapphirine-bearing assemblages. The diagnostic assemblage of this stage is sapphirine-cordierite. Sapphirine occurs in characteristic symplectite textures. The major mineralogical changes can be described by the discontinuous FMAS reaction: orthopyroxene + sillimanite → sapphirine + cordierite + corundum.The disequilibrium textures found in the Hasleholmen rocks are characteristic for reactions which have been in progress but then ceased before they run to completion. Textures such as reaction rims, symplectites, partial replacement, corrosion and dissolution of earlier minerals are characteristic of granulite facies rocks. They indicate that, despite relatively high temperatures (700–800° C), equilibrium domains were small and chemical communication and transport was hampered as a result of dry or H2O-poor conditions.

Notes: The Vredefort dome (2.0 Ga) represents the central uplift of a very large impact structure. This uplift exposed a nearly complete cross-section through the continental crust in the region, which is 25–30 km thick. Two metamorphic events took place at about the same time as the impact. The first event, so-called static metamorphism, is pre-impact and produced lithologies varying from low-grade shale to high-grade hornfels. It resembles contact metamorphism by its lack of schistosity, but is more regional as it extends over a large area and is not associated with large intrusions.The second event, the post-shock metamorphism, is responsible for the recrystallization of the shock features. The investigation of this event has been focused on the degree of alteration of the coesite-stishovite-bearing pseudotachylite veins that formed during the transit of the shock wave. These high-pressure silica polymorphs are only present in the upper part of the stratigraphic sequence; downward they have been converted to fibrous quartz. At the highest grade, the fibrous quartz is in turn replaced by triple-junctioned mosaic quartz. The post-shock metamorphism was generated by the heat of the rock before shock, plus the heat released by the shock wave. The isograds, plotted on a map, can be translated into depth of burial and therefore provide valuable information regarding the geological setting immediately before impact. At the time of impact, the rocks were relatively cool and the static metamorphism had ceased with several tens of millions of years separating the two metamorphic events. The static metamorphism was probably caused by continental crustal extension in a stress-free environment and the lack of deformation is probably due to rapid uplift during the later stages of the impact event.

Notes: The P–T paths for metamorphic complexes from the Precambrian shields and fold belts of different ages may result from advection, i.e. one-cycle convective processes in the lithosphere. This conclusion has been exemplified by the metamorphic evolution of several well-known complexes, for which an advective model can be successfully applied. Numerical simulations of the above processes in terms of Newtonian rheology by using a two-dimensional finite element program have been conducted.Two representative models for intracontinental gravitational ordering initiated presumably by mantle activity are considered: (i) a thermally activated multi-layered rhythmic sequence and (ii) huge rising diapiars causing circulation, in which crustal lithologies underwent high-P metamorphism (above 10–15 kbar) and subsequent ascent toward the Earth's surface.

Notes: The Waterman Metamorphic Complex of the central Mojave Desert was exposed as a consequence of early Miocene detachment-dominated extension. However, it has evidence consistent with a more extensive geological history that involves collision of a crustal fragment(s), tectonic thickening by overthrusting and two periods of extension. The metamorphic complex contains granitoid intrusives and felsic mylonitic gneisses as well as polymetamorphic rocks that include marble, calc-silicate, quartzite. mafic granulite, pyribolite, amphibolite, migmatite and biotite schist. The latter group of rocks was affected by an initial series of high-grade metamorphic events (M1 and M2) and a localized lower grade overprint (M3). The initial metamorphism (M1) can be separated into two stages along its high-grade P–T path: M1a, a granulite facies metamorphism at 800–850° C and 7.5–9 kbar and Mlb, an upper amphibolite facies overprint at 750–800° C and 10–12 kbar. M1a developed mineral assemblages and textures consistent with granulite facies conditions at a reduced activity of H2O and is associated with intense ductile deformation (D1) and minor local partial melting. M1b overprinted the granulite assemblages with a series of hydrous phases under conditions of increasing pressure and H2O activity and is accompanied by little or no deformation. M2 developed at lower pressures and temperatures (650–750° C, 4.5–5.5 kbar) and is distinguished by a second local overprint of hydrous phases that reflects an input of aqueous fluids probably associated with the intrusion of a series of granitic dykes and veins. Effects of M3 are confined to the Mitchel detachment zone, an anastomosing early Miocene detachment fault, and are characterized by local ductile/brittle deformation (D2) of the pre-existing high-grade rocks and granitoid intrusives and by the production of mylonites and mylonitic gneisses under greenschist facies conditions (300–350° C, 3–5 kbar). The initial overprint (M1a) represents metamorphism, devolatilization and minor partial melting of supracrustal rocks under granulite facies conditions as a consequence of tectonic and, possibly, magmatic thickening. The increasing pressure transition of M1a to M1b reflects a period of continued compressional tectonism, thrusting and influx of H2O, in part, locally related to crystallization of partial melts. The near isothermal decompression between M1b and M2 probably represents a pre-112-Ma extensional episode that may have been the result of a decompressional readjustment of a thickened crust. Following the initial extensional event, the metamorphic complex remained at depths of 10–17 km for at least 90 Ma until it was uplifted following Miocene extension. M3 develops locally in response to this second extensional period resulting from the early Miocene detachment faulting.

Notes: The High Himalayan Crystalline Sequence in north-central Nepal is a 15-km-thick pile of metasediments that is bound by the Main Central Thrust to the south and a normal fault to the north. The Langtang section through the metasediments shows an apparent inversion of metamorphic isograds with high-P, kyanite-grade rocks exposed beneath low-P, sillimanite-grade rocks. Textural evidence confirms that the observed inversion is a result of a polyphase metamorphic history and phase equilibria studies indicate that thermal decoupling has occurred within a mechanically coherent section of crust. Rocks now exposed at the base of the High Himalayan thrust sheet underwent Barrovian regional metamorphism (M1) prior to 34 Ma in the early stages of the Himalayan orogeny, recording metamorphic conditions of T= 710 ± 30° C, P= 9 ± 1 kbar. After the activation of the Main Central Thrust, which emplaced these metapelites southwards onto the lower grade Lesser Himalayan formations, the upper part of the thrust sheet was overprinted by a second heating event (M2), resulting in sillimanite-grade metamorphism and anatexis of metapelites at T= 760 ± 30° C, P= 5.8 ± 0.4 kbar between 17 and 20 Ma. Crustally derived, leucogranite magmas have been emplaced into low-grade Tethyan sediments on the hangingwall of the normal fault that bounds the northern limit of the metapelitic sequence.The cause of the selective heating of the upper section of the metasediments during M2 cannot be reconciled with either post-thrusting thermal relaxation or advection models. The cause of M2 remains problematical but it is suggested that heat focusing has occurred at the top of the High Himalayan Crystalline Sequence as a result of movement on the normal fault blanketing metapelites of high heat productivity with low-grade sediments of low thermal conductivity. This model implies that the normal fault was active before M2, consistent with decompression textures that formed during, or shortly after, sillimanite-grade metamorphism.

Notes: The two major Early to Middle Palaeozoic tectonic/metamorphic events in the northern Appalachians were the Taconian (Middle to Late Ordovician) in central to western areas and the Acadian (Late Silurian to early Middle Devonian) in eastern to west-central areas. This paper presents a model for the Acadian orogenic event which separates the Acadian metamorphic realm into eastern and western belts based on distinctively different styles. We propose that the Acadian metamorphism in the east was the delayed consequence of Taconian back-arc lithospheric modification. East of the Taconian island arc, thick accumulations of Late Ordovician and Silurian sediments, coupled with plutons rising along a magmatic arc, produced crustal thermal conditions appropriate for anomalously high-T, low-P metamorphism accompanied by major crustal anatexis. In this zone, upward melt migration was coupled with subsequent E-W crustal shortening (possibly due to outboard collision with the Avalon terrane) to produce mechanical conditions that favoured formation of fold and thrust nappes and resultant tectonic thickening to the west (and probably to the east as well).The basis for the distinction between the Eastern and Western Acadian events lies in the contrasting styles of metamorphism accompanying each. Evidence for contrasting metamorphic styles consists of (1) estimated metamorphic field gradients (MFGs) based on thermobarometric studies, and (2) petrological evidence for contrasting P–T trajectories. West of the Acadian metamorphic front, the Taconian zone has an MFG in which peak temperatures of 400-600° C were reached at pressures of about 4–6 kbar, with both P and T increasing to the east. Near its western edge, the Western Acadian metamorphic overprint has a similar MFG to the Taconian, and is mainly discriminated by 40Ar/39Ar dating and microtextural evidence. East of this narrow zone, the Western Acadian overprint is characterized by progressively higher temperatures (600–725° C) and pressures (6.5–10 kbar, or more) to the east, yielding an overall MFG that lies along, or slightly above, the kyanite–sillimanite boundary on a P–T diagram. There is little or no plutonism accompanying Western Acadian metamorphism.In contrast, thermobarometry in the Eastern Acadian, east of the Bronson Hill Belt, yields high-T, intermediate-P conditions for the highest grade rocks known in New England: T= 650–750° C, P= 4.5–6.5 kbar for granulite facies assemblages which apparently formed along an ‘anticlockwise’P–T path. The Bronson Hill Belt lies geographically between the Eastern and Western Acadian zones and shows transitional petrological behaviour: anomalously high temperatures at intermediate pressures, but a ‘clockwise’ path with decompression cooling.Radiometric dating indicates peak Taconian conditions may have been achieved as early as 475 Ma in the Taconian hinterland and as late as 445 Ma in the Taconian foreland (including the Taconic allochthons). Eastern Acadian magmatism may have started as early as 425 Ma, and most nappe-stage deformation and metamorphism in the Eastern Acadian zone appears to have ended by about 410 Ma. Tectonic thickening in the Western Acadian (including the western counterparts of the nappe-stage deformation documented in the Eastern Acadian) must pre-date attainment of peak metamorphic conditions dated at 395–385 Ma. Dome-stage deformation clearly post-dates peak metamorphism and deforms metamorphic isograds. The end of Western Acadian deformation is well constrained by 370-375 Ma radiometric ages of late pegmatites and granitoids which cross-cut all structures.

Notes: A suite of migmatites in uppermost amphibolite facies schists of the Koettlitz Group exposed in the Taylor Valley, Antarctica, provides direct evidence of the behaviour of partially molten rock during syn-anatectic deformation. The geometry of the migmatites is directly related to their position relative to the hinge of a kilometre-scale antiform. Migmatitic rocks on the fold limbs are characterized by extensional shears and fractures, filled with leucosome material, that intersect the pervasive foliation and millimetre-thick stromatic leucosomes. Vein- and dyke-like leucosomes become more common and thicker from the limb to the hinge region of the antiform. Rocks characterized by high leucosome-to-rock ratios near the antiform hinge are xenolithic in appearance. Major parasitic folds within the hinge contain leucogranite ‘microplutons’ up to 50 m across beneath refractory ‘cap-rock’ layers.Angular boudinage structures in schists surrounded by leucosomes indicate a relatively low yield strength in the leucosome, which is compatible with a molten rather than solid leucosome. Leucogranite-bearing extensional shears and fractures indicate that repeated extensional fracturing and shearing promoted by high fluid (melt) pressure is an important mechanism of melt segregation. Dilation in the hinges of developing folds aids the migration of melt into fold hinges and the development of 10–50-m-wide ‘microplutons’ of xenolith-rich leucogranite.Lack of vapour-absent melting and consequent low melt-to-rock ratios allowed the Koettlitz Group to maintain its structural coherency on a kilometre scale. Consequently, leucosome ‘microplutons’ did not exceed 50 m in width, and therefore observed leucosomes have not contributed to the development of adjacent plutonic-scale granitoids.

Notes: Systematic mapping of a transect along the well-exposed shores of Georgian Bay, Ontario, combined with the preliminary results of structural analysis, geochronology and metamorphic petrology, places some constraints on the geological setting of high-grade metamorphism in this part of the Central Gneiss Belt. Correlations within and between map units (gneiss associations) have allowed us to recognize five tectonic units that differ in various aspects of their lithology, metamorphic and plutonic history, and structural style. The lowest unit, which forms the footwall to a regional decollement, locally preserves relic pre-Grenvillian granulite facies assemblages reworked under amphibolite facies conditions during the Grenvillian orogeny. Tectonic units above the decollement apparently lack the early granulite facies metamorphism; out-of-sequence thrusting in the south produced a duplex-like structure. Two distinct stages of Grenvillian metamorphism are apparent. The earlier stage (c. 1160–1120 Ma) produced granulite facies assemblages in the Parry Sound domain and upper amphibolite facies assemblages in the Parry Island thrust sheet. The later stage (c. 1040–1020 Ma) involved widespread, dominantly upper amphibolite facies metamorphism within and beneath the duplex. Deformation and metamorphism recently reported from south and east of the Parry Sound domain at c. 1100–1040 Ma have not yet been documented along the Georgian Bay transect. The data suggest that early convergence was followed by a period of crustal thickening in the orogenic core south-east of the transect area, with further advance to the north-west during and after the waning stages of this deformation.

Notes: The Main Zone of the Hidaka metamorphic belt is an imbricate stack of crustal material derived from an island arc in which a sequence of units with increasing metamorphic grade from low to high structural levels is exposed. The basal part of the metamorphic sequence underwent granulite facies metamorphism with peak P–T conditions of 7kbar, 870°C. In this zone pelitic granulite includes leucosomes which consist mainly of orthopyroxene-plagioclase-quartz.To test whether the leucosome was derived by partial melting of the surrounding pelite, melting experiments of the pelitic granulite were carried out for water-saturated and dry systems at 7 kbar and 850°C. The chemical composition of the leucosome produced during these runs shows a peraluminous S-type tonalitic affinity and is located very close to the tie-line between the average melts produced in water-saturated systems and the average composition of the residual orthopyroxene + plagioclase. This therefore suggests that the lecosome in pelitic granulite was formed by incipient anatexis at close to the highest P–T condition of the Main Zone.The age of the crustal anatexis is determined by the Rb-Sr whole rock isochron method for garnet-cordierite-biotite gneiss (host rock), garnet-orthopyroxene-cordierite gneiss (restite) and S-type tonalite (melt). This gives an age of 56.0 Ma with an initial 87Sr/86Sr ratio of 0.705711. The S-type tonalite magmas that form large intrusive masses in the Main Zone were probably generated by crustal anatexis in deeper parts of the crust at the same time (late Palaeocene).

Notes: Caledonian eclogite facies shear zones developed from Grenvillian garnet granulite facies anorthosites and gabbros in the Bergen Arcs of western Norway allow direct investigation of the relations between macroscopic structures and crystallographic preferred orientation (CPO) in lower continental crust. Field relations on the island of Holsnøy show that the eclogites formed locally from granulite facies rocks by progressive development of: (1) eclogite adjacent to fractures; (2) eclogite in discrete shear zones (〉 2 m thick); (3) eclogite breccia consisting of 〉80% well-foliated eclogite that wraps around rotated granulite blocks; and (4) anastomosing, subparallel, eclogite facies shear zones 30–100 m thick continuous over distances 〉 1 km within the granulite terrane. These shear zones deformed under eclogite facies conditions at an estimated temperature of 670 ± 50°C and a minimum pressure of 1460 MPa, which corresponds to depths of 〉55 km in the continental crust. Detailed investigation of the major shear zones shows the development of a strong foliation defined by the shape preferred orientation of omphacite and by alternating segregations of omphacite/garnet-rich and kyanite/zoisite-rich layers. A consistent lineation throughout the shear zones is defined by elongate aggregates of garnet and omphacite. The CPO of omphacite, determined from five-axis universal stage measurements, shows a strong b-axis maximum normal to foliation, and a c-axis girdle within the foliation plane with weak maxima parallel to the lineation direction. These patterns are consistent with deformation of omphacite by slip parallel to [001] and suggest glide along (010). The lineation and CPO data reveal a consistent sense of shear zone movement, although the displacement was small. Localized faulting of high-grade rocks accompanied by fluid infiltration can be an important mode of failure in the lower continental crust. Field relations show that granulite facies rocks can exist in a metastable state under eclogite facies conditions and imply that the lower crust can host differing metamorphic facies at the same depth. Deformation of granulite and partial conversion to eclogite, such as is exposed on Holsnøy Island, may be an orogenic-scale process in the lowermost crust of collisional orogens.

Notes: Mineral composition and quantitative thermobarometric studies indicate that the Teslin-Taylor Mountain and Nisutlin terranes within the Teslin suture zone (TSZ), Yukon, record widespread high-P/T metamorphic conditions consistent with subduction zone dynamothermal metamorphism. The highest P–T conditions (575–750° C and 9–17 kbar) are preserved in tectonites formed during normal dip-slip ductile shear. Dextral strike-slip tectonites record lower P–T conditions (400–550° C and 5–8 kbar), and tectonites which show reverse shear have peak temperatures of c. 420° C and a minimum peak pressure of 3 kbar. Dynamothermal metamorphism took place in a west-dipping B-type subduction zone outboard of western North America in Permo-Triassic time. TSZ tectonites were underplated against the hangingwall plate of the subduction zone. Following subduction of the ocean basin which separated North America from the hangingwall plate, TSZ tectonites were overthrust eastward as a coherent structural package as a result of A-type subduction of Cassiar strata in early Jurassic time.(Par)autochthonous Cassiar tectonites, which comprised the leading edge of the western North American margin, record prograde moderate-P, high-T metamorphism (550–750° C and 7–13 kbar) synchronous with top-to-the-east ductile shear. Metamorphism occurred as a result of subduction of the North American margin into the TSZ subduction zone in early Jurassic time. Following metamorphism Cassiar tectonites cooled slowly from 500 to 300° C during the period middle Jurassic to middle Cretaceous.TSZ and Cassiar tectonites were deformed during changing P–T conditions. Data from each of these tectonite packages indicate that grain-scale strain partitioning may have allowed local recrystallization of individual minerals by the addition of mechanical energy. The composition of the new grains reflects the P–T conditions under which that particular grain was deformed.

Notes: The Al–Mg-rich granulites from the In Ouzzal craton, Algeria, show a great diversity of mineral reactions which correspond to continuous equilibria as predicted by phase relationships in the FeO–MgO–Al2O3–SiO2 system. The sequence of mineral reactions can be subdivided into three distinct stages: (1) a high-P stage characterized by the growth of coarse mineral assemblages involving sapphirine and the disappearance of early corundum and spinel-bearing assemblages; (2) a high-T stage characterized by the development of Sa–Qz-bearing assemblages; and (3) a later stage, in which garnet-bearing assemblages are replaced by more or less fine symplectites involving cordierite.During the course of early mineral reactions, the distribution coefficient, Kd, between the various ferromagnesian phases decreased significantly whereas Al2O3 in pyroxene increased concomitantly. These observations, when combined with topological constraints, clearly indicate that the high-P stage 1 was accompanied by a significant rise in temperature (estimated at 150 ± 50° C) under near isobaric conditions, in agreement with the reaction textures. By stage 2, pressure and temperature were extreme as evidenced by the low Kd value between orthopyroxene and garnet (Kd= 2.06–1.99), the high alumina content in pyroxene (up to 11.8%) and the high magnesium content in garnet [100 Mg/(Mg + Fe) = 60.6]. Mineral thermometry based on Fe–Mg exchange between garnet and pyroxene and on Al-solubility in pyroxene gives temperatures close to 970 ± 70° C at 10 ± 1.5 kbar. These results are in agreement with the development of Sa–Qz assemblages on a local scale.Late mineral reactions have been produced during a decompression stage from about 9 to 6 kbar. Except for local re-equilibration of Mg and Fe at grain boundaries, there is no evidence for further reactions below 700° C.We interpreted the whole set of mineral reactions as due to changes in pressure and temperature during a tectonic episode located at c. 2 Ga. Because of the lack of evidence for further uplift after the thermal relaxation which occurred at c. 6 kbar, it is possible however that the exhumation of this granulitic terrane occurred in a later tectonic event unrelated to its formation.