ALBERT

Notes: Flash photolysis technique has been used to obtain the rate and thermodynamic parameters of the reversible dimerization reactions of a range of ten phenoxy radicals (I-X) in a toluene-dibutylphthalate mixture (0.6 cP ≤η≤18.4 cP): \documentclass{article}\pagestyle{empty}\begin{document}$$ {\rm R}^{.} + {\rm R}^{.} {\mathop{{\buildrel{-\!\!\longrightarrow}\over{\longleftarrow}}}\limits_{k_{-1}}^{k_1}}{\rm D} $$\end{document} The main reason for the difference in the k1 values are the different steric hindrances in radicals. It has been found that the values of k1 for 2,6-diphenyl-4-methoxy- (I), 2-phenyl-(III), and 2-methoxyphenoxy (IV) radicals are 3-5 times smaller than the respective diffusion constants calculated according to the Debye formula with regard to the spin-statistical factor: \documentclass{article}\pagestyle{empty}\begin{document}$$ k_{diff} = \sigma \frac{{8{\rm RT}}}{{3000{\rm \eta }}} $$\end{document} The resultant ΔH1≠values for these radicals in toluene and dibutylphthalate are close to the activation energies of the viscous flow of the solvents B. Linear relationships with a slope equal to unity are observed between log k1 and log(T/η). The recombination of radicals I, III, and IV is limited by translational diffusion. The k1 values for 2,6-diphenyl- (VII), 2,6-di-tert-butyl- (IX), and 2,6-di-tert-butyl-4-methylphenoxy (X) radicals are 10-60 times smaller than kdiff and Δ H≠ B. In the case of radical X in toluene ΔH1≠ 0. The recombination of these three radicals includes an intermediate step of complex formation: \documentclass{article}\pagestyle{empty}\begin{document}$${{\rm R}^\cdot+{\rm R}^\cdot}{\mathop {{\scriptstyle\longleftarrow}^{\hskip-13pt\longrightarrow}}}{\rm R^\cdot}\ldots {\rm R}^\cdot \rightarrow {\rm D}$$ \end{document} For 4-phenyl- (II), 2,6- dimethoxy- (V), 2,4-diphenyl- (VI), and radicals VII, IX, and X the linear relationships between log k1 and log (T/η) have a slope of from 0.5 ± 0.05 to 0.8 ± 0.05. The k1-1 versus η relationships for these radicals are not straight lines. The recombination of these six radicals is limited by translational and rotational diffusion. With the aid of theoretical models, the k1 versus η relationships have been used to derive the steric factor f in radical recombination and the angle θ between the axis and the solid angle generatrix. The solid angle defines the reaction spot on the radical-sphere surface. The recombination of the 2,6-diphenyl-4-diphenylmethylphenoxy radical (VIII) takes place in the region intermediate between the diffusion and the kinetic ones, and the relationship between log k1 and log (T/η) for this radical has a plateau portion. The log k-1 versus log (T/η) relationships have precisely the same form as the corresponding k1 relationships, which is quite in line with the theory of diffusion-controlled reversible recombination reactions.

Notes: The decomposition of CH3CD2CH3 was studied from 713 to 853 K at pressures of 98-466 torr. The values of k1/k2 = 2.08 ± 0.05 and k3/k4 = 2.04 ± 0.66 were found independent of temperature by measuring the ratios of CH4/CH3D and CH3CHD2/CH3CD3, respectively, for the following reactions:. Isomerization of CH3CDCH3 was detected by measuring CHDCH2 formed from the isomerized radical. The expression of k21/k22 was found to be where k21 and k22 are the rate constants of. The results and conclusions are discussed and compared with previous works.

Notes: A detailed investigation of the mechanism of cyanogen oxidation is presented. Recent induction time measurements of ignition in cyanogen-oxygen-argon mixtures behind reflected shocks are computer modeled to obtain an agreement between the experimental and calculated values. A 15-step reaction scheme is suggested to reproduce the parameters E and βi in the experimental parametric relation: τ = 10αexp(E/RT)IICiβi. An explanation is offered to the very strong dependence of the induction time on the cyanogen concentration and the very weak dependence on the oxygen concentration. The sensitivity spectrum shows that the induction time is highly dependent on the O + C2N2 → NCO + CN and NCO + M → N + CO + M reactions (shortened) and the O + NCO → CO + NO and N + NCO → N2 + CO reactions (increased).

Notes: Atmospheric photodissociation rate coefficients and photodissociation lifetimes for nitromethane, methyl nitrite, and methyl nitrate were calculated as a function of altitude from their measured visible and near ultraviolet photoabsorption cross sections at 298 K. The lifetime of methyl nitrite is nearly independent of altitude and is approximately 2 min. From 0 to 50 km the lifetime of nitromethane varies from 10 to 0.5 hr, while that of methyl nitrate changes from 5.3 to 0.09 days, respectively.

Notes: Ethyl N—methylcarbamate decomposes thermally over the temperature range of 600-650 K by competing first-order reactions, one forming methylamine, carbon dioxide, and ethylene, the other forming methyl isocyanate and ethanol. The first-order rate constants are described in S—1 units by the equations where R = 1.986 cal/deg mol. The appareance of sym—dimethylurea among the products raised the possibility of gas-phase transesterifications. These were ruled out by the study of the reactions of sym-dimethylurea at 604 K which showed its behavior to be well explained by the rapid decomposition in the gas phase which is reversed in the condensation stage in the analysis.

Notes: The law c = c0 exp(—K √t) in the alkyl radical abstraction reaction is affected by neither the matrix annealing nor the way of the radical generation. If the reaction runs at varying temperature, a dimensionless time τ which does determine unambiguously the degree of conversion can be introduced.

Notes: The kinetics of the gamma-radiation induced free radical reactions in carbon tetrachloride solutions of 2,3-dimethylbutane (DMB) were studied in the temperature range 32-118 °C. The kinetics of the following reactions were measured:\documentclass{article}\pagestyle{empty}\begin{document}$$ \begin{array}{l} {\rm CCl}_3 + {\rm RH} \to {\rm CHCl}_3 + {\rm R} \\ {\rm CCl}_{\rm 3} + {\rm CCl}_{\rm 3} \to {\rm C}_2 {\rm Cl}_6 \\ \end{array} $$\end{document} and the following rate constants expression was obtained:\documentclass{article}\pagestyle{empty}\begin{document}$$ \log k_2 /k_3^{1/2} (M^{ - 1/2} \sec ^{ - 1/2} )\, = \,(2.40 \pm 0.17) - (6.96 \pm 0.26)/{\rm \theta } $$\end{document}. The activation energy and the A factor obtained are in good agreement with the values obtained at the gaseous phase, considering the activation energy for self-diffusion of CCl4.

Notes: Measurement of the rate of the reaction is reported. The measurements were made in a flow tube apparatus. The result is based on data for the absolute density of OH(v = 0) obtained from laser-induced fluorescence measurements in the (0-0) band of the OH(A2Σ+ → X2II) system. The density of oxygen atoms was varied by changing the flow rate of NO which is consumed in the reaction N + NO → O + N2. We find that k1 (298 K) = (5.5 ± 3.0) × 106 cm3/mol sec. This result was obtained with consideration and control of the effect of reaction (2): for which vibrationally excited hydrogen is created by energy transfer in the presence of active nitrogen. It was found that the addition of N2 or CO2 effectively suppressed the excitation of H2(v = 1). Measurements of the density of H2(v = 1) were made by VUV absorption in the Lyman band system of H2. All of the reports of low-temperature measurements and some recent theoretical calculations for k1 are discussed. The present result confirms and extends the growingevidence for significant curvature in the low-temperature end of a modified Arrhenius plot of k1 (T).

Notes: The thermal decomposition of ammonia was studied by means of the shock-tube and vacuum ultraviolet absorption spectroscopy monitoring the concentration of atomic hydrogen. The rate constants of both the initiation reaction and the consecutive reaction were determined directly as \documentclass{article}\pagestyle{empty}\begin{document}$$ k_1 = 10^{16.14} \exp (- 90.6{\rm kcal}/RT){\rm cm}^{\rm 3} /{\rm molsec} $$\end{document} and \documentclass{article}\pagestyle{empty}\begin{document}$$ k_{II} = 10^{14.30} \exp (- 23.29{\rm kcal}/RT){\rm cm}^{\rm 3} /{\rm molsec} $$\end{document} respectively.

Notes: O2 in the A3Σu+ state has been prepared in a discharge flow system by recombining oxygen atoms on a nickel surface. The decay of this excited state was followed by observing the emission between 280 and 400 nm. The wall deactivation was observed to approach unit efficiency. Rate constants were determined to be 0.9 × 10-11, 2.9 × 10-13, and 8.6 × 10-16 cm3/molecule sec for the quenching of O2(A3Σu+) by O, O2, and Ar, respectively.

Notes: The rate constant for the reaction CH3O2 + NO2 → (products) has been measured directly by flash photolysis and kinetic spectroscopy. At room temperature and at total pressures between 53 and 580 Torr, k3 = (9.2 ± 0.4) × 108 liter/mole sec so that the rate of formation of the probable primary product peroxymethyl nitrate (CH3O2NO2) may be significant in urban atmospheres.

Notes: Existing data on the self-reactions of tertiary peroxy radicals RO2 has been reanalyzed and corrected to deduce Arrhenius parameters for both termination and nontermination paths. For R = t-Butyl, these are logkt(M-1sec-1) = 7.1 - (7.0/θ) and logknt(M-1sec-1) = 9.4 - (9.0/θ), respectively, different from those recommended by other authors. The higher magnitudes observed for termination processes of tertiary peroxy radicals like those of cumyl and 1,1-diphenylethyl have been discussed in terms of a much greater cage recombination of cumyloxy radicals as contrasted with t-butoxy radicals. It is shown that for benzyl peroxy radicals, the R - O·2 bond dissociation energy is sufficiently low (18-20 kcal) that reversible dissociation into R· + O2 opens a competing second-order path to fast recombination R· + RO·22 → ROOR. This path is probably not important for cumyl peroxy radicals under usual experimental conditions but can become important for 1,1-diphenyl ethyl peroxy radicals at (O2) 〈 10-3M. At very low RO·2 concentrations (〈10-5M), in the absence of added O2, an apparent first-order disappearance of RO·2 can occur reflecting the rate determining breaking of the cumyl - O·2 bond followed by the second step above. The thermochemistry of RO·n is used to show that the reaction of R2O4 → 2RO + O2 must be concerted and cannot proceed via RO·3 which is too unstable and cannot form even from RO· + O2.

Notes: Demetallation rates of α,β,γ,δ-tetrakis(p-sulfophenyl)porphiniron(III) in hydrochloric acid-ethanol-water, perchloric acid-ethanol-water, and sulfuric acid-alcohol-water media were determined. For a given acidity value H0 the order of the rates for the three acids was HCl 〉 H2SO4 〉 HClO4. This is also the order for complex formation between acid anion and iron(III). Consequently ligands as well as protons are involved in the breaking of bonds between the metal and the porphyrin leading to the formation of the activated complex. The log k values for HCl and HClO4 media were not linearly related to the Hammett acidity function as they were for sulfuric acid-ethanol-water media. The average ΔH

Notes: A method is presented for the prediction of rate coefficients and Arrhenius parameters for bimolecular hydrogen atom transfer reactions A + BC → AB + C. The treatment sets out from structural considerations of the complex A ⃛ B ⃛ C and calculates the energy of the complex along the reaction path from empirical functions for a bonding energy term and an endgroup contribution. The treatment proceeds by assuming ultrasimple transition state models and assigning the force constants and vibrational frequencies. Finally the rate coefficient and Arrhenius parameters are obtained on the basis of separable activated complex theory. Application of the method requires known properties of reactant and product molecules and does not demand the use of adjustable parameters. The relation and differences between this method and the BEBO treatment as well as Zavitsas' method are dealt with.

Notes: The rate of the reaction was determined in an isothermal discharge flow reactor with a combined ESR-LMR detection under pseudo-first-order conditions in HO2. The rate constant was identical in experiments with two different HO2 sources: F + H2O2 and H + O2 + M. The absolute rate constant at T = 293 K was measured as \documentclass{article}\pagestyle{empty}\begin{document}$$ k_1 (293K) = (4.6 \pm 1)10^{12} cm^3 /mol\sec $$\end{document} In the range 2 ≤ p mbar ≤ 17 no pressure dependence for k1 was found.

Notes: The addition reactions of CCl3 radicals with cis-C2Cl2H2, trans-C2Cl2H2, and C2Cl3H in liquid cyclohexane-CCl4 mixtures were studied between 323 and 448 K. The Arrhenius parameters of these reactions were competitively determined versus H-atom transfer from cyclohexane and addition to C2Cl4. The present data and the data obtained in previous liquid and gas phase studies show that the reactivities displayed in addition reactions of different radicals with chloroethylenes reflect primarily variations in activation energies rather than in A factors. The activation energies for the addition of CCl3, CF3, and CH3 radicals to chloroethylenes appear, to a large extent, to be determinedby the stability of the adduct radicals. Comparison of the reactivity trends in the addition reactions of chloro- and fluoro-substitutedethylenes indicates that these two electron-withdrawing substituentshave a converse effect on the reactivity of electrophilic radicals. This behavior is ascribed to the strong mesomeric effect of vinylic chlorosubstituents.

Notes: The titration of chemisorbed oxygen by carbon monoxide to form carbon dioxide has been studied from 373 to 673 K over polycrystalline platinum. The pressure transients for CO and CO2 have been measured and simulated numerically. A complex Langmuir-Hinshelwood mechanism is found which fits all the data, and it is not necessary to invoke Eley-Rideal kinetics. The results fall into two temperature regimes, above and below 473 K, which are characterized by different Arrhenius parameters. A change in activation energy with oxygen coverage is also found below 473 K.

Notes: The kinetics of dimethyl sulfoxide (DMSO) oxidation by peroxomonophosphoric acid (PMPA) in aqueous medium at 308 K and I = 0.4 mol/dm3 follow the rate expressions In the pH range from 0 to 2, where k1 and k2 are 5.092 × 10-1 dm3/mol sec and ≃ 0, respectively; in the pH range from 4 to 7, where k2 = 8.127 × 10-3 and k3 = 2.90 × 10-3 dm3/mol sec; and in the pH range from 10 to 13.6, where k4 ≃ 0, and k5 = 3.08 × 10-2 dm3/mol sec.The reaction is interpreted in terms of mechanisms involving an electrophilic and a nucleophilic attack of the peroxomonophosphoric acid species, respectively, in acid and alkaline regions, on the sulfur atom of the sulfoxide molecule giving rise to SN2-type transition states followed by oxygen-oxygen bond fission to form the products.

Notes: The oxidations of ferrocene (FcH) and n-butylferrocene (FcBu) by ferric salts (nitrate or bromide) are strongly inhibited by aqueous cetyltrimethylammonium bromide and nitrate (CTABr and CTANO3, respectively). The kinetics of inhibition fit a model in which the substrates are distributed between water, and the micelles and binding constants Ks to the micelle can be estimated. The oxidations are strongly catalyzed by micelles of sodium lauryl sulfate (NaLS), and the kinetics can be fitted to a model in which the reaction rate depends upon the concentration of both reactants in the micellar pseudophase and the rate constants in that pseudophase, which for both substrates are very similar to those in water. Some added salts reduce the micellar catalysis by excluding ferric ions from the micelle. The oxidations of FcH and FcBu by ferricyanide ions are too fast to be followed in water, but they are inhibited by anionic micelles of NaLS. By analyzing the rate surfactant profiles using independently measured values of Ks the second-order rate constants in water have been estimated.

Notes: Vinylacetylene was pyrolyzed at 300-450°C in a packed and an unpacked static reactor with a pinhole bleed to a quadrupole mass spectrometer. The reactant and C8H8 products were monitored continuously during a reaction by mass spectrometry. In some runs, the products were also analyzed by gas chromatography after the run. In these runs CH4, C2H6, C3H6, and C2H4 were also detected.The reaction for vinylacetylene removal and C8H8 formation is homogeneous, second order in reactant, and independent of the presence of a large excess of N2 or He. However, C8H8 formation is about half-suppressed by the addition of the free-radical scavengers NO or O2. The rate coefficient for total vinylacetylene removal is 1.7 × 106 exp(-79 ± 13 kJ/mol RT) L/mol · s. The major reaction for C4H4 removal is polymerization. In addition four C8H8 isomers, carbon, and small hydrocarbons are formed. The three major C8H8 isomers are styrene, cyclooctatetraene (COT), and 1,5—dihydropentalene (DHP).The C8H8 compounds are formed by both molecular and free-radical processes in a second-order process with an overall k ≃ 3 × 108 exp(-122 kJ/mol RT) L/mol · s (average of packed and unpacked cell results). The molecular process occurs with an overall k = 8.5 × 107 exp (-118 kJ/mol RT) L/mol · s. The COT, DHP, and an unidentified isomer (d), are formed exclusively in molecular processes with respective rate coefficients of 4.4 × 104 exp(-77 kJ/mol RT), 1.7 × 105 exp(-89 kJ/mol RT), and 3.1 × 109 exp(- 148 kJ/mol RT) L/mol · s. The styrene is formed both by a direct free-radical process and by isomerization of COT.

Notes: The product quantum yields in the photolysis of 2,2,4,4-tetramethyl-3-pentanone have been measured in homogeneous solvents of different viscosities, in micellar solutions of cetyltrimethylammonium chloride and sodium dodecyl sulfate, and in dioctadecyl ammonium chloride vesicles.The product quantum yield in n-heptane was found to be 1. This value decreases to 0.5 in paraffin oil as a consequence of geminate recombination. In the presence of free radical scavengers, the extent of geminate disproportionation can be evaluated from the yields of isobutene and 2,2-dimethyl propionaldehyde. From these yields and the geminate recombination yields the total amount of geminate processes and the disproportionation-to-combination ratio for caged radicals are estimated. It is found that micelles provide the most efficient cages. In these media only about 10% of the radicals avoid cage processes. The disproportionation-to-combination ratio of tert-butyl and pivaloyl radicals was found to be extremely media dependent. The measured values ranged from about 0.2 in paraffin oil to 0.8 in cetyltrimethylammonium chloride micelles.

Notes: Kinetics of the thermal decomposition of acetic acid vapor dilute in argon have been studied over the temperature range of 1300-1950 K in a single-pulse shock tube. The acid was found to decompose homogeneously and molecularly via two competing firstorder reaction channels at nearly equal rates, to form methane and carbon dioxide on the one hand, and ketene and water on the other. Fall-off behavior has been taken into account and limiting high-pressure rate constants for both channels have been derived. Ketene was found to decompose both unimolecularly to methylene radicals and carbon monoxide and also by a radical reaction with CH2 to form ethylene and carbon monoxide. The rate constant derived for the unimolecular reaction was found to be in good agreement with an earlier shock tube measurement by H. G. Wagner and F. Zabel [Ber. Bunsenges Phys. Chem., 75, 114 (1971)]. The bimolecular reaction of ketene to produce allene and carbon dioxide, important in lower temperature reaction systems, has been found to be unimportant under the present conditions. A computer model for the decomposition kinetics involving 46 reactions of 21 species has been found to simulate the experimental yield data substantially. Sensitivity analyses have been used to identify reactions which make important contributions to the overall mechanism and yields of major products. Methylene radicals play important roles in determining yields of major species.

Notes: The abstraction of hydrogen/deuterium from CH3CH2Cl, CH3CHDCl, and CH3CD2Cl by photochemically generated ground-state chlorine atoms has been investigated over the temperature range of 8-94°C using methane as a competitor. Rate constant data for the following reactions have been obtained:The temperature dependence of the relative rate constants ki/kj was found to conform to the Arrhenius rate law, where the stated error limits are one standard deviation:\documentclass{article}\pagestyle{empty}\begin{document}$$ k_1 /k_2 = (1.099 \pm 0.015)\exp [(429 \pm 2)/T] $$ $$ k_1 /k_r = (1.422 \pm 0.026)\exp [(1113 \pm 3)/T] $$ $$ k_2 /k_r = (1.295 \pm 0.029)\exp [(684 \pm 3)/T] $$ $$ k_3 /k_r = (1.177 \pm 0.025)\exp [(717 \pm 4)/T] $$ $$ k_4 /k_r = (1.115 \pm 0.023)\exp [(732 \pm 2)/T] $$ $$ k_5 /k_r = (0.978 \pm 0.020)\exp [(985 \pm 2)/T] $$\end{document} and kr is the rate constant for the reference reaction (CH4 + Cl → CH3 + HCl). The β secondary kinetic isotope effects (k2/k3/k4) are close to unity and show a slight inverse temperature dependence. Both preexponential factors and activation energies decrease as a result of deuterium substitution in the adjacent chloromethyl group. The trends are well outside the limits of experimental error.

Notes: The reaction between ozone and carbon monoxide was reinvestigated in the range of 80-160°C. The previously reported rate law -d[O3]/dt = ka[O3][CO] + kb[O3]2 was confirmed and simulated using a mechanism based on an impurity-initiated chain reaction. When the CO was sufficiently purified, kb tended to zero and ka reduced to the value expected for the thermal decomposition of O3. Subsequent reactions of O atoms with CO produced chemiluminescence which was used to measure k3 for \documentclass{article}\pagestyle{empty}\begin{document}$$ {\rm O}\,\, + \,\,{\rm CO}\,\,\mathop {\longrightarrow}\limits^{\rm 3} \,\,{\rm CO}_{\rm 2} \left( {^3 B_2 } \right) $$\end{document} as 10-14.0±0.3 exp[-(1630 ± 325)/T] cm3 molecule-1 s-1. The implications of this are discussed.

Notes: The thermal decomposition of azoisopropane (AIP) was studied by detailed product analysis in the temperature and pressure intervals 498-563 K and 0.67-5.33 kPa. Besides the predominant termination and hydrogen-abstraction reaction of the 2-propyl radical, the decomposition is characterized by a very short chain process. The following rate constants were determined from the measurements\documentclass{article}\pagestyle{empty}\begin{document}$$\begin{array}{rcl} \log (k_1 {\rm /s}^{ - 1} ) &=& (16.3 \pm 0.2) - (199.9 \pm 1.6){\rm kJ mol}^{ - 1} /2.3RT \\ \log (k_4 /k_3^{1/2} {\rm dm}^{{3 \mathord{\left/ {\vphantom {3 2}} \right. \kern-\nulldelimiterspace} 2}} {\rm mol}^{{{ - 1} \mathord{\left/ {\vphantom {{ - 1} 2}} \right. \kern-\nulldelimiterspace} 2}} {\rm s}^{{{ - 1} \mathord{\left/ {\vphantom {{ - 1} 2}} \right. \kern-\nulldelimiterspace} 2}} ) &=& (4.1 \pm 0.3) - (52.5 \pm 3.0){\rm kJ mol}^{ - 1} /2.3RT \\ \log (k_5 /k_3^{1/2} {\rm dm}^{{3 \mathord{\left/ {\vphantom {3 2}} \right. \kern-\nulldelimiterspace} 2}} {\rm mol}^{{{ - 1} \mathord{\left/ {\vphantom {{ - 1} 2}} \right. \kern-\nulldelimiterspace} 2}} {\rm s}^{{{ - 1} \mathord{\left/ {\vphantom {{ - 1} 2}} \right. \kern-\nulldelimiterspace} 2}} ) &=& (2.4 \pm 0.1) - (27.6 \pm 1.3){\rm kJ mol}^{ - 1} /2.3RT \\ k_2 /k_3 &=& 0.51 \pm 0.02 \end{array}$$\end{document} for the following reactions:

Notes: Chlorocyclopropane has been produced by addition of CH2(1A1) and CH2(3B1) to chloroethene. CH2 was generated by the photolysis of ketene at 313 and 366 nm. Chlorocyclopropane was formed in a chemically activated state, had an energy content between 378 and 427 kJ/mol, and reacted in three parallel channels to 3-chloropropene, cis- and trans-1-chloropropene. As secondary reactions elimination of HCl from the chemically activated primary products occurred to form allene and propyne. The apparent rate constants for the isomerization and elimination reactions are reported. The results of RRKM calculations including distribution functions for the activated chlorocyclopropane and a stepladder model for the deactivation support the proposed reaction scheme.

Notes: The kinetics of OH reactions with furan (k1), thiophene (k2), and tetrahydrothiophene (k3), have been investigated over the temperature range 254-425 K. OH radicals were produced by flash photolysis of water vapor at λ 〉 165 nm and detected by timeresolved resonance fluorescence spectroscopy. The following Arrhenius expressions adequately describe the measured rate constants as a function of temperature (units are cm3 molecule-1 S-1): k1 = (1.33 ± 0.29) × 10-11 exp[(333 ± 67)/T], k2 = (3.20 ± 0.70) × 10-12 exp[(325 ± 71)/T], k3 = (1.13 ± 0.35) × 10-11 exp[(166 ± 97)/T]. The results are compared with previous investigations and their implications regarding reaction mechanisms and atmospheric residence times are discussed.

Notes: The reactions of ground-state S(3PJ) atoms with thiirane, methylthiirane, and trans-2,3-dimethylthiirane have been studied by flash photolysis-VUV kinetic absorption spectroscopy. From the analysis of the S(3PJ) decay plots the following rate constants were determined: (1.4 ± 0.2) × 1013, (2.7 ± 0.3) × 1013 and (4.0 ± 0.2) × 1013 (in cm3 mol-1 s-1 units) for thiirane, methylthiirane and trans-2,3-dimethylthiirane, respectively, showing an upward trend with increasing methylation.

Notes: NO Abstract.

Notes: An examination of the results of measurements of the forward and reverse rate constants for the reaction \documentclass{article}\pagestyle{empty}\begin{document}$$ {\rm H} + {\rm C}_{\rm 2} {\rm H}_{\rm 6} \mathbin{\lower.3ex\hbox{$\buildrel\textstyle\rightarrow\over {\smash{\leftarrow}\vphantom{_{\vbox to.5ex{\vss}}}}$}} {\rm H}_{\rm 2} + {\rm C}_{\rm 2} {\rm H}_{\rm 5} $$\end{document} shows that agreement between the kinetics and the thermochemistry is achieved only through use of a value of ΔHf(C2H5) = 28 kcal mol-1. This system therefore provides further support for the recent measurement of this quantity.

Notes: The very low pressure reactor (VLPR) technique has been used to measure the bimolecular rate constant of the title reaction at 300 K. The rate constant is given by log k1 (1/mol s) = (11.6 ± 0.4) - (5.9 ± 0.6)/θ the equilibrium constant has also been measured at the same temperature and is given by K1 = (5.6 ± 1) × 10-3 and hence log k-1 (1/mol s) = 9.5 ± 0.1. The results show that the reaction Br + t—C4H9 → HBr + i—C4H8 is unimportant under the present experimental conditions. Assigning the entropy of t-butyl radical to be 74 ± 2 eu which is in the possible range, the value of K1 gives ΔH°f (t-butyl) = 9.1 ± 0.6 kcal/mol-1. This yields for the bond dissociation, DH° (t-butyl-H) = 93.4 ± 0.6 kcal/mol. Both of these values are found to be in good agreement with recent VLPP studies.

Notes: Kinetics of the basic hydrolysis of glyceryl trinitrate (TNG) were investigated in CO2-free aqueous calcium hydroxide solutions. The hydrolysis reactions were carried out in a temperature controlled reactor vessel with provision for continuous N2 sparging of the reaction mixture. TNG hydrolyzed via second-order reaction at 25°C, 18°C, and 10°C. The activation energy of the hydrolysis reaction of TNG was calculated from the kinetic data and found to be equal to 27.53 kcal/mol. The major products of the hydrolysis of TNG in solution of calcium hydroxide were calcium nitrate and calcium nitrite, accounting for approximately 50% of the degradation products. The minor identified products such as calcium oxalate and nitrate esters amounted to approximatey 6% of the products. The remaining 30% of the isolated products was a mixture of calcium formate, a nitrate ester, and unidentified volatiles, polymerlike substances, and other organic residue.

Notes: Results obtained from the photolysis of ketene with acetylene strongly support the formation of C3H3 radicals in the title reaction. Stationary state studies are interpreted in terms of the reaction \documentclass{article}\pagestyle{empty}\begin{document}$${\rm C}_3 {\rm H}_{\rm 4}^{\rm *} \buildrel3\over\rightarrow{\rm C}_3 {\rm H}_3^ \cdot + {\rm H}^ \cdot$$\end{document} with a rate constant (109.8 s-1) which is compared to RRKM predictions. In pulsed laser induced decomposition experiments, recombination products involving C3H3 have been detected (some for the first time) and their formation modeled using step (3) with the same rate constant.

Notes: A readily applicable empirical formula is obtained for the collisional efficiency for energy transfer between a highly vibrationally excited reactant and a seasoned (usually quartz) wall, in terms of the molecular weight, potential well depth and dipole moment of the reactant. This expression is used to examine corrections due to nonunit wall collision efficiency in the high-pressure rate parameters obtained from very low-pressure pyrolysis experiments. It is found that these corrections are up to ca. ±5 kJ/mol in the high-pressure activation energy and a factor of ca. 2 in the high-pressure frequency factor, for molecules with molecular weight less than ca. 100 and where experiments are carried out at temperatures exceeding 1000 K.

Notes: The rate constants for reactions (4) and (5) were determined at room temperature by pulsed laser photolysis and time resolved mass spectrometry. A description of the experimental setup is given. CFCl2O2 radicals were generated by photolysis of CFCl3 at 193 nm in the presence of an excess of oxygen, using an excimer laser. The rate constant for reaction (4), determined under different experimental conditions is: \documentclass{article}\pagestyle{empty}\begin{document}$$k_4 = 1.6{\rm }(\pm 0.2) \times 10^{ - 11} {\rm cm}^{\rm 3} \cdot {\rm molecule}^{ - 1} \cdot {\rm s}^{ - 1}$$\end{document} The rate constant of reaction (5) was determined in the pressure range of 1-12 torr, using oxygen as the buffer gas. The reaction is in its fall-off region and the parameters determined by using the semiempirical method of Troe, taking Fc = 0.6 are: \documentclass{article}\pagestyle{empty}\begin{document}$$\begin{array}{l} k(0) = 3.5{\rm }(\pm 0.5) \times 10^{ - 29} {\rm cm}^{\rm 6} \cdot {\rm molecule}^{ - 2} \cdot {\rm s}^{ - 1} \\ k(\infty) = 6.0{\rm }(\pm 1.0) \times 10^{ - 12} {\rm cm}^{\rm 3} \cdot {\rm molecule}^{ - 1} \cdot {\rm s}^{ - 1} \\ \end{array}$$\end{document} The value of k(∞) is obtained from the low-pressure measurements and therefore the uncertainty on the actual high-pressure limit is higher than the error limits quoted above. The results are compared with those reported for similar reactions.

Notes: Potassium persulfate oxidizes triphenylphosphine to triphenylphosphine oxide in 60% aqueous acetonitrile. It has been suggested that the oxygen of the product, triphenylphosphine oxide, might originate from solvent water, following nucleophilic attack on an intermediate phosphonium ion. We have investigated the origin of the oxygen in the oxidation of triphenylphosphine by potassium persulfate in 60% aqueous acetonitrile containing 20% [18O]water. The product was analyzed by using the 18O isotope effect in 31P NMR spectroscopy. The magnitude of the 18O isotope-induced shift was determined by synthesizing triphenylphosphine [18O]oxide and was found to be 0.038 ppm upfield. The product of the oxidation reaction in 20% [18O]water displayed no 18O isotope effect. The origin of the oxygen in the oxidation reaction is the persulfate ion, consistent with an alternative mechanism involving nucleophilic attack by water at the sulfur atom of a phosphonium peroxysulfate intermediate.

Notes: It is shown how kinetic electron spin resonance spectroscopy with intermittent radical generation can be used to obtain rate constants of various simultaneous reactions in systems containing more than one kind of transient radicals. The technique is applied to reactions of tert-butyl [(CH3)3Ċ] and isopropylol [(CH3)2ĊOH] radicals generated by photolysis of di-tert-butyl ketone and acetone in 2-propanol/acetone mixtures. It yields the rates of generation of the two radicals, the rate constants for their self- and crossterminations and for the reaction of tert-butyl with 2-propanol. The extent of diffusion control of the termination constants is discussed.

Notes: Trifluoro-t-butoxy radicals have been generated by reacting fluorine with 2-trifluoromethyl propan-2-ol: \documentclass{article}\pagestyle{empty}\begin{document}$$ {\rm \dot F} + {\rm CF}_3 {\rm C}({\rm OH})({\rm CH}_3)_2 \to {\rm HF} + {\rm CF}_3 {\rm C}({\rm \dot O})({\rm CH}_3)_2 $$\end{document} Over the temperature range 361-600 K the trifluoro-t-butoxy radical decomposes exclusively by loss of the —CF3 group [reaction (-2)] rather than by loss of —CH3 group [reaction (-1)]: The limits of detectability of the product CF3COCH3, by gas-chromatographic analysis, place a lower limit on the ratio k-2/k-1 of ca. 75. The implications of these results in relation to the reverse radical addition reactions to the carbonyl group are discussed along with the thermochemistry of the reactions.

Notes: The gas-phase reaction of CF3 with HCN has been examined over a wide conversion range using CF3I as a thermal and photolytic source of radicals. Quantitative and qualitative results show a significant increase of the specific rate constant for the hydrogen abstraction reaction relative to CF3 recombination when reaction is carried out under ultraviolet irradiation. This “extra” formation of the reaction product, CF3H, has been assigned to the participation of iodine in this system through the formation of a (I-HCN) intermediate. Arrhenius parameters obtained for the addition mechanism of I to HCN do not seem to conform to a single reaction step, on the contrary, they correspond to a more complex reaction scheme.

Notes: Small low residence time flow tube reactors made of alumina and used as molecular beam sources are described. In these reactors, gas mixtures are rapidly heated and brought to reaction. The composition of the gas leaving the reactor is analyzed by molecular beam mass spectroscopy. For quantitative simulation of the reacting gas flow, the theory of one-dimensional compressible flow with friction, heat transfer, and chemical reaction is brought into a form suitable for practical computation. The system has been applied to study the thermal decompositions of O3 and N2O. The experimental results on both reactions can be well modeled by homogeneous reaction mechanisms with accepted rate constants. Heterogeneous reaction steps are shown to be unimportant.

Notes: The yield of benzene in the reaction of 1,4- and 1,3-cyclohexadiene with OH radicals in the presence of oxygen was determined using H2O2 and CH3ONO as OH radical sources. Both in the H2O2 and the CH3ONO systems, the yield of benzene from 1,4-cyclohexadiene was 15.3% and the yield from 1,3-cyclohexadiene was 8.9%. On the basis of the obtained yields, the rate constant for allylic hydrogen abstraction per C—H in cyclohexadiene was determined to be 3.8 × 10-12 cm3 molecule-1 s-1. The branching ratio of the hydrogen abstraction to overall reaction for 1-butene and 1-pentene was estimated to be (25-14)% by applying the obtained rate constants. The result was in good agreement with the branching ratio determined directly by use of the discharge flow photoionization mass spectrometer by Biermann, Harris, and Pitts [4].

Notes: The photolysis of carbon tetrachloride in the presence of a number of organosilicon compounds has been investigated in the gas phase. The products obtained from the photolysis experiments were those expected from a chain reaction in which trichloromethyl radicals abstract hydrogen atoms from the organosilane. Arrhenius parameters for hydrogen atom transfer were determined relative to those for trichloromethyl radical combination. The activation energies for the reaction of methyl, trifluoromethyl, and trichloromethyl radicals with organosilicon compounds are compared and the results rationalized in terms of polar effects.

Notes: Calculations of low-pressure limit, third-order rate constants are presented for the association reactions A + O2 + N2 and A + OH + N2 (A = Li, Na, K) over the temperature range 200-2000 K and a comparison is made with the available experimental data.

Notes: The photooxidation of formaldehyde in CH2O—O2, oxygen-lean mixtures was studied in the temperature range 298-378 K. H2 and CO formation and the loss of O2 proceed by a chain mechanism, which between 328 and 378 K follows the previously suggested kinetics [1] with one modification. The reaction HO2 + CH2O ⇄ HO2CH2O (5) is now assumed to be reversible and ΔH5° is estimated to be between 14 and 19 kcal/mol. The relative yields of the chain formed H2 and CO and of the consumed O2 remained constant over the entire temperature range indicating that the relative efficiencies of the HO reactions: HO + CH2O → H2O HCO† (7), HO + CH2O → H2O + HCO (8) and HO + CH2O → HOCH2O (9) are temperature independent.

Notes: The kinetics of OH reactions with 1-4 carbon aliphatic thiols have been investigated over the temperature range 252-430 K. OH radicals were produced by flash photolysis of water vapor at λ 〉 165 nm and detected by time-resolved resonance fluorescence spectroscopy. All thiols investigated react with OH at nearly the same rate; k(298 K) = 3.2-4.6 × 10-11 cm3 molecule-1 s-1, -Eact = 0.6-1.0 kcal/mol, A = 0.6-1.2 × 10-11 cm3 molecule-1 s-1. CH3SH and CH3SD react with OH at identical rates over the entire temperature range investigated. We conclude that the dominant reaction pathway is addition to the sulfur atom.

Notes: The addition of ethene to cyclohexa-1,3-diene has been studied between 466 and 591 K at pressures ranging from 27 to 119 torr for ethene and 10 to 74 torr for cyclohexa-1,3-diene. The reaction is of the “Diels-Alder” type and leads to the formation of bicyclo[2.2.2]oct-2-ene. It is homogeneous and first order with respect to each reagent. The rate constant (in l./mol sec) is given by\documentclass{article}\pagestyle{empty}\begin{document}$$ \log _{10} k_a = - (25,970 \pm 50)/4.576{\rm T + }(6.66 \pm 0.02) $$\end{document}The retron-Diels-Alder pyrolysis of bicyclo[2.2.2]oct-2-ene has also been studied. In the ranges of 548-632 K and 4-21 torr the reaction is first order, and its rate constant (in sec-1) is given by\documentclass{article}\pagestyle{empty}\begin{document}$$ \log _{10} k_p = - (57,300 \pm 100)/4.576{\rm T + }(15.12 \pm 0.04) $$\end{document}The reaction mechanism is discussed. The heat of formation and the entropy of bicyclo[2.2.2]oct-2-ene are estimated.

Notes: The kinetics of ethane oxidation was studied at 320, 340, 353 and 380°C, mixture composition 2 C2H6 + 1 O2, and total pressure 609 torr. It was found that at 320°C CH2O and CH3CHO were branching agents. A series of experiments was conducted on 2C2H6 + O2 oxidation in the presence of 0.7% 14C-labeled ethylene. The ethylene oxide was found to form only from C2H4, formaldehyde formed from C2H4 and C2H6; and CH3CHO, C2H5OH, and CH3OH formed only from ethane. The formation rates of C2H4, C2H4O, and CH2O were calculated by the kinetic tracer method. At 320°C the fraction of oxygen-containing products formed from C2H4 was 16-18%, and at 353 and 380°C it was 30-40%.

Notes: The thermal unimolecular decomposition of bromocyclobutane has been investigated over the temperature range of 791-1224 K using the technique of very low-pressure pyrolysis (VLPP). HBr elimination is the sole mode of decomposition under the experimental conditions. No evidence could be found for the ring-cleavage pathway to ethylene and vinyl bromide. Assuming a four-center transition state and an Arrhenius A factor the same as that for HCl elimination from chlorocyclobutane, RRKM calculations show that the experimental unimolecular rate constants are consistent with the Arrhenius expression \documentclass{article}\pagestyle{empty}\begin{document}$$ \log k(\,{\rm sec}^{{\rm - 1}} {\rm )}\, = \,(13.6 \pm 0.3) - (52.0 \pm 1.0)/{\rm \theta }\,$$\end{document} where θ = 2.303RT kcal/mol. The activation energy is higher than that for the open-chain analog, 2—bromobutane. This finding is consistent with the results for the corresponding chloro and iodo compounds.

Notes: The kinetics and mechanism of ascorbic acid (DH2) oxidation have been studied under anaerobic conditions in the presence of Cu2+ ions. At 10-4 ≤ [Cu2+]0 〈 10-3M, 10-3 ≤ [DH2]0 〈 10-2M, 10-2 ≤ [H2O2] ≤ 0.1M, 3 ≤ pH 〈 4, the following expression for the initial rate of ascorbic acid oxidation was obtained: where χ2 (25°C) = (6.5 ± 0.6) × 10-3 sec-1. The effective activation energy is E2 = 25 ± 1 kcal/mol. The chain mechanism of the reaction was established by addition of Cu+ acceptors (allyl alcohol and acetonitrile). The rate of the catalytic reaction is related to the rate of Cu+ initiation in the Cu2+ reaction with ascorbic acid by the expression where C is a function of pH and of H2O2 concentration. The rate equation where k1(25°C) = (5.3 ± 1) × 103M-1 sec-1 is true for the steady-state catalytic reaction. The Cu+ ion and a species, which undergoes acid-base and unimolecular conversions at the chain propagation step, are involved in quadratic chain termination. Ethanol and terbutanol do not affect the rate of the chain reaction at concentrations up to ≈0.3M. When the Cu2+-DH2-H2O2 system is irradiated with UV light (λ = 313 nm), the rate of ascorbic acid oxidation increases by the value of the rate of the photochemical reaction in the absence of the catalyst. Hydroxyl radicals are not formed during the interaction of Cu+ with H2O2, and the chain mechanism of catalytic oxidation of ascorbic acid is quantitatively described by the following scheme.Initiation: Propagation: Termination:

Notes: Using published data on the kinetics of pyrolysis of C2Cl6 and estimated rate parameters for all the involved radical reactions, a mechanism is proposed which accounts quantitatively for all the observations:The steady-state rate law valid for after about 0.1% reaction is and the reaction is verified to proceed through the two parallel stages suggested earlier whose net reaction isA reported induction period obtained from pressure measurements used to follow the rate is shown to be compatible with the endothermicity of reaction A, giving rise to a self-cooling of the gaseous mixture and thus an overall pressure decrease.From the analysis, the bond dissociation energy DH0(C2Cl5—Cl) is found to be 70.3 ± 1 kcal/mol and ΔHf3000(·C2Cl5) = 7.7 ± 1 kcal/mol. The resulting π—bond energy in C2Cl4 is 52.5 ± 1 kcal/mol.

Notes: Spectrophotometric methods were used to investigate the rate of the reaction of Br2 with HCOOH in aqueous, acidic media. The reaction products are Br- and CO2. The kinetics of this reaction are complicated by both the formation of Br3- as Br- is formed and the dissociation of HCOOH into HCOO- and H+. Previous work on this reaction was carried out at acidities lower than the highest used here and led to the conclusion that only HCOO- reacts with Br2. It is agreed that this is by far the principal reaction. However, at the highest acidity experiments, an added small component of reaction was found, and it is suggested that it results from the direct reaction of Br2 with HCOOH itself. On this assumption, values of the rate constants for both reactions are derived here. The rate constant for the reaction of HCOO- with Br2 agrees with values previously reported, within a factor of 2 on the low side. The reaction involving HCOOH is more than 2000 times slower than the reaction involving HCOO-, but it does contribute to the overall rate as [H+] approaches 1M. These derived rate constants are able to simulate quantitatively the authors' absorbance-versus-time data, demonstrating the validity of their data treatment methods, if not mechanistic assignments. Finally, activation parameters were determined for both rate constants. The values obtained are: ΔE

Notes: The reaction of carbon monoxide with ozone was studied in the range of 75-160°C in the presence of varying amounts of CO2 and, for a few experiments, of O2. At room temperature the reaction was immeasurably slow, but in a flow system it showed chemiluminescence with undamped oscillations. In a static system above 75°C the emission showed damped oscillations when O2 was present. In the absence ofadded O2 the emission showed a slow decay with a half-life of 1 hr. The luminescence consisted of partially resolved bands in the range of 325-600 nm, and the source was identified as CO2(1B2) → CO2(1Σg+) + hv. The kinetics were complex, and the observed rate law could be accounted for bya mechanism involving the chain sequence \documentclass{article}\pagestyle{empty}\begin{document}$ {\rm O(}^{\rm 3} P{\rm ) + CO( + M)}\mathop {{\rm rightarrow}}\limits^{\rm 3} {\rm CO}_{\rm 2} {\rm (}^{\rm 3} B_{\rm 2} {\rm ) ( + M), CO}_{\rm 2} {\rm (}^{\rm 3} B_{\rm 2} {\rm ) + O}_{\rm 3} {\rm }\mathop {{\rm rightarrow}}\limits^{\rm 7} {\rm CO}_{\rm 2} {\rm (}^{\rm 1} \sum\nolimits_{\rm g}^{\rm + } {} {\rm ) + O}_{\rm 2} {\rm + O} $\end{document}. From measurements of -d[O3]/dtand relative emission, rate constant ratios were obtained and estimates of k3were made.

Notes: The reaction NO + O3 → NO2 + O2 has been studied in a 220-m3 spherical stainless steel reactor under stopped-flow conditions below 0.1 mtorr total pressure. Under the conditions used, the mixing time of the reactants was negligible compared with the chemical reaction time. The pseudo-first-order decay of the chemiluminescence owing to the reaction of ozone with a large excess of nitric oxide was measured with an infrared sensitive photomultiplier. One hundred twenty-nine decays at 18 different temperatures in the range of 283-443 K were evaluated. A weighted least-squares fit to the Arrhenius equation yielded k = (4.3 ± 0.6) × 10-12 exp[-(1598 ± 50)/T] cm3/molecule sec (two standard deviations in brackets). The Arrhenius plot showed no curvature within experimental accuracy. Comparison with recent results of Birks and co-workers, however, suggests that a nonlinear fit, as proposed by these authors, is more appropriate over an extended temperature range.

Notes: The gas-phase free radical displacement reaction has been studied in the temperature range of 240-290°C and at 140°C with the thermal decomposition of azomethane (AM) and di-tert-butylperoxide (DTBP), respectively, as methyl radical sources. The reaction products of the CD3 radicals were analyzed by mass spectrometry. Assuming negligible isotope effects, Arrhenius parameters for the elementary radical addition reaction were derived: \documentclass{article}\pagestyle{empty}\begin{document}$$ {\rm log}_{{\rm 10}} k_1 (cm^3 /mol\sec) = (10.5 \pm 0.4) - (11,500 \pm 1100)/4.576T $$\end{document}The data are discussed with respect to the back reaction and general features of elementary addition reactions.

Notes: The redox potential and iodine concentration behavior of the title reaction and component reactions have been examined. The effect of hydrogen peroxide, potassium iodate, manganese (II) sulfate, sulfuric acid, and acetone concentration on the time period and redox potential behavior is reported. Iodine production and consumption rates for the component reactions are given, and some mechanistic suggestions, involving iodine dioxide as the one electron oxidant, are made.

Notes: The production of both the b1Σ+ and a1Δ states of NCl has been observed from the reaction of HN3 with flowing streams of Cl and F atoms. The results suggest that a two-step reaction sequence is responsible for the production of excited NCl, as follows: The rate contant (all products) for the first step is k(F + HN3) 〉 1 × 10-11 cm3/molecule sec. Comparison of this value to results obtained in a previous study of the F + HN3 system yields a value k(F + N3) = 2 × 10-12 cm3/molecule sec. The rate constant for the reaction of chlorine atoms with HN3 was determined to be k(Cl + HN3) 1 × 10-12 cm3/molecule sec. The difference between the Cl + HN3 and F + HN3 rates is interpreted in terms of an addition-elimination mechanism.

Notes: The kinetics of oxidation of benzyl alcohol and substituted benzyl alcohols by sodium N-chloro-p-toluenesulfonamide (chloramine-T, CAT) in HClO4 (0.1-1 mol/dm3) containing Cl- ions, over the temperature range of 30-50°C have been studied. The reaction is of first order each with respect to alcohol and oxidant. The fractional order dependence of the rate on the concentrations of H+ and Cl- suggests a complex formation between RNCl- and HCl. In higher acidic chloride solution the rate of reaction is proportional to the concentrations of both H+ and Cl7hyphen;. The observed solvent isotope effect (kD2O/kH2O) is 1.43 at 30°C. The reaction constant (p = -1.66) and thermodynamic parameters are evaluated. Rate expressions and probable mechanisms for the observed kinetics have been suggested.

Notes: The kinetics and mechanism of the silver(II) oxidation of methanol, ethanol, 1-propanol, 1-methyl- ethanol, 1-butanol, 2-methyl-1-propanol, 2-butanol, 2-methyl-2-propanol, D4-methanol, and D6-methanol have been investigated at 8.0 and 20.0°C in aqueous perchloric acid media (1.00 ≤ [HClO4] ≤ 4.00M; μ = 4.0M). The kinetics were monitored by following the disappearance of Ag(II) with a spectrophotometric stopped-flow technique. The reactions are first order in each reactant and involve both Ag2+ and AgOH+ species. No kinetic or spectroscopic evidence for complex formation between reactants was obtained. The results are discussed with reference to electron density on the —OH or αC-H substrate sites and to the isotopic hydrogen/deuterium rate quotients found for methanol and ethanol.

Notes: The carbon kinetic isotope effect in the reaction of CH4 with OH has an experimentally measured value of 1.003. The measurement was performed using a static system in which the source of OH was the gas-phase photolysis of H2O2 with ultraviolet light produced by a high-pressure mercury arc lamp. Implications for the tropospheric cycle of CH4 are considered briefly.

Notes: It was found that the rates of absorption of oxygen by pyridine-aqueous sodium hydroxide emulsions and the same emulsions containing benzil were catalyzed by the addition of quaternary salts and followed the same rate law:\documentclass{article}\pagestyle{empty}\begin{document}$$ - \frac{{dPo_2}}{{dt}} = k_1 \left[{{\rm Po}_{\rm 2}} \right]\left[{^ -} \right]\left[{{\rm benzil}} \right]^0 + k_2 \left[{{\rm Po}_2} \right]\left[{OH^ -} \right]\left[{{\rm Et}_{\rm 4} {\rm NCl}} \right][benzil]^0 $$\end{document}. It was concluded that the autooxidation of benzil in pyridine-aqeuous sodium hydroxide emulsions has as its rate-determining step a step in the autooxidation of pyridine. Possibly the superoxide formed in the autooxidation of pyridine is the oxidizing agent in the oxidation of benzil.

Notes: It is shown how electron spin resonance spectroscopy with modulated radical initiation can be used to analyze by purely spectroscopic means the second-order termination kinetics of systems containing two different kinds of radicals. The technique is applied to species generated by photoreduction of acetone in tetraethoxy silane. The bimolecular self- and cross reactions of \documentclass{article}\pagestyle{empty}\begin{document}${\rm (CH}_{\rm 3} {\rm CH}_{\rm 2} {\rm O)}_{\rm 3} {\rm SiO\dot CHCH}_{\rm 3} (\dot R_1 )\,and\,(CH_3 )_2 \dot COH(\dot R_2 )$\end{document} are found to be encounter-controlled processes. For the cross termination the often used relation k12 = (4 k1k2)1/2 is verified experimentally.

Notes: The homogeneous gas-phase thermal decomposition kinetics of germane have been measured in a single-pulse shock tube between 950 and 1060 K at pressures around 4000 torr. The initial decomposition is GeH4 → GeH2 + H2 in its pressure-dependent regime, with log kGeH4(4000) = 13.83 ± 0.78 - 50,750 ± 3570 cal/2.303RT. RRKM calculations suggest that the high-pressure Arrhenius parameters are log k GeH4(M → ∞) = 15.5 - 54,300 cal/2.303RT. Extrapolations to static system pyrolysis conditions (T ∼ 600 K, P ∼ 200 torr) give homogeneous reaction rates which are much slower than those observed, hence the static system pyrolysis of germane must be predominantly heterogeneous. Shock-initiated pyrolysis reaction stoichiometry is 2 mol H2 per mole GeH4, suggesting that the subsequent decomposition of germylene is essentially quantitative. Investigations of the hydrogen product yields for pyrolysis of GeD4 in øCH3 further indicate that the germylene decomposition reaction is mainly GeH2 → H2 + Ge, but that a small amount of reaction to H atoms may also occur.

Notes: The photooxidation of chloral was studied by infrared spectroscopy under steady-state conditions with irradiation of a blackblue fluorescent lamp (300 nm 〈 λ 〈 400 nm, λmax = 360 nm) at 296 ± 2 K. The products were hydrogen chloride, carbon monoxide, carbon dioxide, and phosgen. The kinetic results reveal that the reaction proceeds via chain reaction of the Cl atom:The results lead to the conclusion that mechanism (B) is confirmed to be more likely than mechanism (A), which was favored at one time by Heicklen for the mechanism of the oxidation of trichloromethyl radicals by oxygen molecules: The ratio of the initial rates of CO and CO2 formation gave k7/k6 = 4.23M-1, and the lower limit of reaction (5) was found to be 3.7 × 108M-1 sec-1.

Notes: The kinetics of bromination of several aromatic compounds (anilides, anisoles, and phenols) was investigated in 80% aqueous acetic acid (v/v) in the temperature range 20-50°C using N-bromosuccinimide (NBS) as the reagent. The reaction was found to be first order in the aromatic substrate (ArH), and zero order in NBS, the overall order being 1. Stoichiometry of the reaction was 1:1. An increase in solvent polarity increased the reaction rate, and chloride ions were found to be specific catalysts for the reaction. Arrhenius activation energy remained almost constant for all the substrates. A probable mechanism explaining all these observed facts was proposed. The mechanism involved an attack by Br+ or more probably by a solvated Br+ ion on the aromatic substrate.

Notes: The photooxidation of the 1,3-butadiene-NO-air system at 298 ± 2 K was investigated in an environmental chamber under simulated atmospheric conditions. The irradiation gave rise to the formation of acrolein in a 55% yield, based on 1,3-butadiene initial concentration for all the experimental runs.The rate of formation of acrolein was the same as that of 1,3-butadiene consumption, indicating that acrolein is the major product of the 1,3-butadiene oxidation in air.The dependence of acrolein concentration on irradiation time showed thata secondary process, identified as an oxidation of acrolein by ⋅OH radicals, was occurring during the photochemical runs. The rate constant of this secondary process was determined by measuring the relative rates of disappearance of acrolein and n-butane during the irradiation of acrolein-n-butane-NO-air mixtures. The so obtained relative rate constant value was placed on an absolute basis using a reported rate constant for the n-butane + ⋅OH reaction; a value of (1.6 ± 0.2) × 1010 M-1 sec-1 was obtained.

Notes: The Cl atom-initiated oxidation of CH2Cl2 and CH3Cl was studied using the FTIR method in the photolysis of mixtures typically containing Cl2 and the chlorinated methanes at 1 torr each in 700 torr air. The results obtained from product analysis were in general agreement with those reported by Sanhueza and Heicklen. The relative rate constant for the Cl atom reactions of CH2Cl2 and CH3Cl was determined to be k(Cl +CH3Cl)/k(Cl + CH2Cl2) = 1.31 ± 0.14 (2σ) at 298 ± 2 K.

Notes: The reactions where Y = CH3 (M), C2H5 (E), i—C3H7 (I), and t—C4H9 (T) have been studied between 488 and 606 K. The pressures of CHD ranged from 16 to 124 torr and those of YE from 57 to 625 torr. These reactions are homogeneous and first order with respect to each reagent. The rate constants (in L/mol·s) are given by \documentclass{article}\pagestyle{empty}\begin{document}$$ {\rm log}_{{\rm 10}} k_{{\rm NMBO}} = - {{\left( {26530 \pm 80} \right)} \mathord{\left/ {\vphantom {{\left( {26530 \pm 80} \right)} {4.576T + \left( {6.05 \pm 0.03} \right)}}} \right. \kern-\nulldelimiterspace} {4.576T + \left( {6.05 \pm 0.03} \right)}} $$\end{document} \documentclass{article}\pagestyle{empty}\begin{document}$$ {\rm log}_{{\rm 10}} k_{{\rm XMBO}} = - {{\left( {28910 \pm 130} \right)} \mathord{\left/ {\vphantom {{\left( {28910 \pm 130} \right)} {4.576T + \left( {6.32 \pm 0.05} \right)}}} \right. \kern-\nulldelimiterspace} {4.576T + \left( {6.32 \pm 0.05} \right)}} $$\end{document} \documentclass{article}\pagestyle{empty}\begin{document}$$ {\rm log}_{{\rm 10}} k_{{\rm NEBO}} = - {{\left( {26150 \pm 120} \right)} \mathord{\left/ {\vphantom {{\left( {26150 \pm 120} \right)} {4.576T + \left( {5.85 \pm 0.05} \right)}}} \right. \kern-\nulldelimiterspace} {4.576T + \left( {5.85 \pm 0.05} \right)}} $$\end{document} \documentclass{article}\pagestyle{empty}\begin{document}$$ {\rm log}_{{\rm 10}} k_{{\rm XEBO}} = - {{\left( {28560 \pm 120} \right)} \mathord{\left/ {\vphantom {{\left( {28560 \pm 120} \right)} {4.576T + \left( {6.07 \pm 0.05} \right)}}} \right. \kern-\nulldelimiterspace} {4.576T + \left( {6.07 \pm 0.05} \right)}} $$\end{document} \documentclass{article}\pagestyle{empty}\begin{document}$$ {\rm log}_{{\rm 10}} k_{{\rm NIBO}} = - {{\left( {26560 \pm 80} \right)} \mathord{\left/ {\vphantom {{\left( {26560 \pm 80} \right)} {4.576T + \left( {5.57 \pm 0.03} \right)}}} \right. \kern-\nulldelimiterspace} {4.576T + \left( {5.57 \pm 0.03} \right)}} $$\end{document} \documentclass{article}\pagestyle{empty}\begin{document}$$ {\rm log}_{{\rm 10}} k_{{\rm XIBO}} = - {{\left( {28350 \pm 100} \right)} \mathord{\left/ {\vphantom {{\left( {28350 \pm 100} \right)} {4.576T + \left( {5.47 \pm 0.04} \right)}}} \right. \kern-\nulldelimiterspace} {4.576T + \left( {5.47 \pm 0.04} \right)}} $$\end{document} \documentclass{article}\pagestyle{empty}\begin{document}$$ {\rm log}_{{\rm 10}} k_{{\rm NTBO}} = - {{\left( {28920 \pm 50} \right)} \mathord{\left/ {\vphantom {{\left( {28920 \pm 50} \right)} {4.576T + \left( {5.86 \pm 0.02} \right)}}} \right. \kern-\nulldelimiterspace} {4.576T + \left( {5.86 \pm 0.02} \right)}} $$\end{document} \documentclass{article}\pagestyle{empty}\begin{document}$$ {\rm log}_{{\rm 10}} k_{{\rm XTBO}} = - {{\left( {32890 \pm 120} \right)} \mathord{\left/ {\vphantom {{\left( {32890 \pm 120} \right)} {4.576T + \left( {6.19 \pm 0.05} \right)}}} \right. \kern-\nulldelimiterspace} {4.576T + \left( {6.19 \pm 0.05} \right)}} $$\end{document} The Arrhenius parameters are used as a test for a biradical mechanism and to discuss the endo selectivity of the reactions.

Notes: The technique of laser photolysis of alkyl and perfluoroalkyl iodides at 266 nm followed by time-resolved detection of the 1.3-μm emission from I*(2P1/2) has been used to measure the rate constants for deactivation of I* by CH3I, C2H5I, CF3I, and CH4. The recommended values are (2.76± 0.22) × 10-13, (2.85 ± 0.40) × 10-13, (3.5 ± 0.5) × 10-17, and (7.52 ± 0.12) × 10-14, respectively, in units of cm3 molecule-1 S-1.

Notes: The reactions of labeled N15NO+ with CO, NO, O2, 18O2, N2, NO2, and N2O have been investigated using a tandem ICR instrument. In each case the total rate coefficient, product distribution, and kinetic energy dependence were measured. The results indicate that very specific reaction mechanisms govern these reactions. This conclusion is suggested by the lack of isotopic scrambling in many cases and by the complete absence of energetically allowed products in almost all of the systems. The kinetic energy studies indicate that most of the reaction channels proceed through an intermediate complex at low energies and via a direct mechanism at higher kinetic energies. Such direct mechanisms include long range charge transfer and atom or ion transfer.

Notes: The reaction of CH4 + Cl2 produces predominantly CH3Cl + HCl, which above 1200 K goes to olefins, aromatics, and HCl. Results obtained in laboratory experiments and detailed modeling of the chlorine-catalyzed polymerization of methane at 1260 and 1310 K are presented. The reaction can be separated into two stages, the chlorination of methane and pyrolysis of methylchloride. The pyrolysis of CH3Cl formed C2H4 and C2H2 in increasing yields as the degree of conversion decreased and the excess of methane increased. Changes of temperature, pressure, or additions of HCl had little effect. In the absence of CH4 C2H4 and C2H2 are formed by the recombination of ĊH3 and ĊH2Cl radicals. With added CH4 recombination of ĊH3 forms C2H6, which dehydrogenates to C2H4 + H2. C2H4 in turn dehydrogenates to C2H2 + H2. While HCl, C, CH4, and H2 are the ultimate stable products, C2H4, C2H2, and C6H6 are produced as intermediates and appear to approach stationary concentrations in the system. Their secondary reactions can be described by radical reactions, which can lead to soot formation. ĊH3 - initiated polymerization of ethylene is negligible relative to the Ċ2H3 formation through H abstraction by Cl. The fastest reaction of Ċ2H3 is its decomposition to C2H2. About 20% of the consumption of C2H2 can be accounted for by the addition of Ċ2H3 to it with formation of the butadienyl radical. The addition of the latter to C2H2 is slow relative to its decomposition to vinylacetylene. Successive H abstraction by Cl from C4H4 leading to diacetylene has rates compatible with the experimental values. About 10% of Ċ4H5 abstracts H from HCl and forms butadiene. Successive additions of Ċ2H3 to butadiene and the products of addition can account for the formation of benzene, styrene, naphthalene, and higher polyaromatics. The following rate parameters have been derived on the basis of the experimentally measured reaction rates, the estimated frequency factors, and the currently available heat of formation of the Ċ2H3 radical (69 kcal/mol): \documentclass{article}\pagestyle{empty}\begin{document}$$ \begin{array}{*{20}c} {\mathop {{\rm C}_{\rm 2} }\limits^. {\rm H}_{\rm 3} \mathop {\longrightarrow}\limits_{\left( {\rm M} \right)}^{39} {\rm H}\,\, + \,\,{\rm C}_{\rm 2} {\rm H}_{\rm 2} } & {\log k\left( {1\,{\rm atm,}\,{\rm 1300}\,{\rm K}} \right)\, = \,5.2\, + \,0.3\,s^{ - 1} } \\ \end{array} $$\end{document} \documentclass{article}\pagestyle{empty}\begin{document}$$ \begin{array}{*{20}c} {{\rm C}_{\rm 2} {\rm H}_{\rm 4} \, + \,\mathop {{\rm C}_{\rm 2} }\limits^. \,\mathop {\longrightarrow}\limits^{17} \,\mathop {{\rm C}_{\rm 4} }\limits^. {\rm H}_{\rm 7} } \hfill & {E\, \ge \,2\, \pm \,2\,{{{\rm kcal}} \mathord{\left/ {\vphantom {{{\rm kcal}} {{\rm mol}}}} \right. \kern-\nulldelimiterspace} {{\rm mol}}}\,} \hfill \\ {\mathop {{\rm C}_{\rm 2} }\limits^. {\rm H}_{\rm 5} \, + \,{\rm C}_{\rm 6} {\rm H}_{\rm 6} \,\mathop {\longrightarrow}\limits^{40} \,\mathop {{\rm C}_{{\rm 12}} }\limits^. {\rm H}_{{\rm 11}} } \hfill & {E\, = \,11\, \pm \,2\,{{{\rm kcal}} \mathord{\left/ {\vphantom {{{\rm kcal}} {{\rm mol}}}} \right. \kern-\nulldelimiterspace} {{\rm mol}}}} \hfill \\ \end{array} $$\end{document}

Notes: The kinetics of fast elementary recombination of neutral ketyl radicals of benzophenone and its four derivatives (BPH⋅), the dismutation of benzophenone radical anions, the disproportionation between BPH⋅ and stable nitroxyl radicals, (), and the electron transfer have been investigated in both individual solvents and binary mixtures of different viscosities. Reaction (1) for unsubstituted BPH in water, water glycerol, and n-hexane is controlled by diffusion with 2k1 ≃ kdiff. In aliphatic alcohols and toluene, which form solvation complexes with BPH⋅, reaction (1) is diffusion-enhanced and activation-controlled, respectively, with 2k1 〈 kdiff. In a viscous solvent such as 1-propanol-glycerol mixture (100 ≲ η ≲ 450 cP) reaction (1) is diffusion-controlled. Reaction (2) in alkaline 1-propanol and alkaline 1-propanol-glycerol mixture is activation controlled. The rates of reactions (3) and (4) for benzophenone radicals and nitroxyl radicals of the imidazoline series decrease as the viscosity of the water-glycerol and 1-propanol-glycerol mixtures is increased. The reactions are molecular mobility limited; nevertheless, the numerical values of k3 (k4) are 2-6 times as small as the corresponding kdiff values due to the low steric factor of the reactions (therefore called pseudodiffusion-controlled reactions). The theoretical estimates of k3 (k4) are in good agreement with the experimental results. The elimination of spin forbiddance in the process of radical recombination in viscous solvents is discussed.

Notes: The approximations developed to determine the energy distribution function of molecules activated above energy decomposition threshold, from experimental data, have been tested. The approach involved the theoretical (RRKM) calculations of “pseudoexperimental” data for a variety of activated energy distributions. (Single or double Gaussian representations were used in all cases.) Subsequently the algorithms mentioned were applied in order to recuperate the original (i.e., input) energy distributions from these pseudoexperimental data. The results obtained provide strong evidence in favor of the validity of the algorithms and illustrate the necessary requirements for their applications. A trend toward lower accuracy as the energy distributions move to higher energies has been observed. Evidence of the influence of the distribution width is also reported. The origins of the approximation errors have been studied, and ways for further improvement are suggested.

Notes: The autooxidation of retinyl acetate and methyl retinoate was investigated in chlorobenzene at 45°C. The rates of thermal initiation in the retinyl acetate solutions were measured, and a value was determined of the rate constant for the reaction of oxygen with retinyl acetate (RH + O2 → R· + HO2·): kio = (1.3 ± 0.2) × 10-5 L/mol · s. The number of moles of oxygen absorbed per mole of polyene depends on the substrate concentration. A kinetic scheme for the methyl retinoate autooxidation was proposed which takes into account the isomerization of primary peroxy radicals, and the rate constants for different elementary reactions were estimated. The partial rate constant for “allylic” hydrogen abstraction from retinyl acetate was estimated to be ≥ 1.65 × 103 L/mol · s. A probable propagation sequence was proposed for the autooxidation of retinyl acetate.

Notes: Rate constants for the self- and cross-termination of the isopropylol radical [(CH3)2ĊOH] and its anion [(CH3)2ĊO-] in aqueous solution are determined by kinetic electron spin resonance. Whereas the self-termination of the neutral radical occurs close to the diffusion-controlled limit, the cross- and self-terminations involving the anion are slower and reflect effects of charge repulsion and steric constraints by solvation.

Notes: The unimolecular decomposition of methyl nitrite in the temperature range 680-955 K and pressure range 0.64 to 2.0 atm has been studied in shock-tube experiments employing real-time absorption of CW CO laser radiation by the NO product. Computer kinetic modeling using a set of 23 reactions shows that NO product is relatively unreactive. Its initial rate of production can be used to yield directly the unimolecular rate constant, which in the fall-off region, can be represented by the second-order rate coefficient in the Arrhenius form: \documentclass{article}\pagestyle{empty}\begin{document}$$k_1 = 10^{17.90 \pm 0.21} \exp (- 17200 \pm 400/T){\rm cm}^{\rm 3} {\rm mol}^{ - 1} {\rm s}^{ - 1}$$\end{document} A RRKM model calculation, assuming a loose CH3ONO≠ complex with two degrees of free internal rotation, gives good agreement with the experimental rate constants.

Notes: Using a relative rate technique, rate constants for the gas phase reactions of the OH radical with n-butane, n-hexane, and a series of alkenes and dialkenes, relative to that for propene, have been determined in one atmosphere of air at 295 ± 1 K. The rate constant ratios obtained were (propene = 1.00): ethene, 0.323 ± 0.014; 1-butene, 1.19 ± 0.06; 1-pentene, 1.19 ± 0.05; 1-hexene, 1.40 ± 0.04; 1-heptene, 1.51 ± 0.06; 3-methyl-1-butene, 1.21 ± 0.04; isobutene, 1.95 ± 0.09; cis-2-butene, 2.13 ± 0.05; trans-2-butene, 2.43 ± 0.05; 2-methyl-2-butene, 3.30 ± 0.13; 2,3-dimethyl-2-butene, 4.17 ± 0.18; propadiene, 0.367 ± 0.036; 1,3-butadiene, 2.53 ± 0.08; 2-methyl-1,3-butadiene, 3.81 ± 0.15; n-butane, 0.101 ± 0.012; and n-hexane, 0.198 ± 0.017. From a least-squares fit of these relative rate data to the most reliable literature absolute flash photolysis rate constants, these relative rate constants can be placed on an absolute basis using a rate constant for the reaction of OH radicals with propene of 2.63 × 10-11 cm3 molecule-1 s-1. The resulting rate constant data, together with previous relative rate data from these and other laboratories, lead to a self-consistent data set for the reactions of OH radicals with a large number of organics at room temperature.

Notes: The kinetics of the oxidation of lactic and atrolactic acids by ceric sulfate have been studied in the medium HClO4-Na2SO4-NaClO4 at 25.0°C and ionic strength 2.0 mol dm-3 over a wide range of organic substrate (HL), hydrogen and bisulfate ion concentrations. The redox reactions proceed significantly through three simultaneous paths involving intermediate complexes between the reactive cerium(IV) species and the organic substrate according to the following expression \documentclass{article}\pagestyle{empty}\begin{document}$$k_{{\rm obs}} = \frac{{(b[{\rm HSO}_4^ -] + c[{\rm HSO}_4^ -]^2 + [{\rm H}^ +]){\rm [HL]}}}{{\{ f_1 [{\rm HSO}_4^ -]^3 + d_1 [{\rm HSO}_4^ -] + e_1 [{\rm HSO}_4^ -]^2){\rm }[{\rm H}^ +]\} + A'[{\rm HL}]}}$$\end{document} where kobs indicates the observed pseudo-first-order rate constant, b and c are rate constants relative to that for the path associated with the term [H+] in the numerator, and A' is a quantity depending on the [H+] and [HSO4-] concentrations. Moreover, three equilibria involving cerium(IV) and HSO4- (or SO42-) ions are important from a kinetic point of view, the cumulative equilibrium constants being in the ratios β1: β2: β3 = d1: e1: f1. The present data are compared with those obtained previously for the cerium(IV) oxidation of glycolic acid and the substituent effects discussed.

Notes: A kinetic study of oxidation of hydroxylamine by bromate ion in acid sulfate solution using spectrophotometric and potentiometric methods is reported. Oxidation of hydroxylamine to nitrate is quantitative and followed competitive, consecutive, and auto catalytics steps characterized by induction periods. In the slow rate limiting step, hydroxylamine on reaction with HOBr (k1′) forms an intermediate I, which further reacts fast with second molecule of HOBr (k2′) giving nitrite. Nitrite reacts with HOBr (k3′) yielding the final product nitrate. Nitric acts as an autocatalyst also and its initial addition decreased the induction periods. In excess of hydrogen ion concentration all the reaction steps follow second-order kinetics. All the second-order rate constants are reported and the reaction mechanism is proposed.

Notes: Mixtures of NH3 and N2O dilute in Ar were heated behind incident shock waves in the temperature range 1750-2060 K. A cw ring dye laser, tuned to the center of an OH absorption line in the ultraviolet, was used to monitor OH concentration profiles by absorption spectroscopy. Infrared emission was used to follow N2O (at 4.5 μm) and NH3 (at 10.5 μm) concentration - time histories. The early-time NH3 and OH concentration profiles were sensitive to the rate constants of the reactionsleading to the following best-fit expressions for k2 and k3:k2 = 1013.34±0.3 exp(-4470/T) and k3 = 1013.91±0.2 exp(-4230/T) cm3 mol-1 s-1. The results of this study combined with previous low-temperature data suggest a significant non-Arrhenius behavior for both k2 and k3.

Notes: The thermal decomposition of azoisopropane (AIP) was studied in the presence of various quantities of propylene in the temperature and pressure intervals 498-553 K and 3.33-5.33 kPa. The inhibition functions relating to formation of the products were determined; these proved a good basis for interpretation of the formation of the secondary decompositon products of AIP. The experimental data support the conception that the βμ radical - radical reactionoccurs. The product of this is not stable; its decomposition is one of the sources of the secondary products. The ratio of the rate constants was determined for the following reactions:

Notes: The photooxidation of acrylonitrile, methacylonitrile, and allylcyanide in the presence of NO was studied in parts per million concentration using the long-path Fourier transform IR spectroscopic method. The stoichiometry of the OH radical initiated oxidation of methacrylonitrile was established as \documentclass{article}\pagestyle{empty}\begin{document}$ \left( {{\rm OH}} \right) + {\rm CH}_{\rm 2} = {\rm C}\left( {{\rm CH}_{\rm 3} } \right){\rm CN + 2NO + 2O}_{\rm 2} \mathop {\hbox to 20pt{\rightarrowfill}}\limits^{1.0} {\rm HCHO + CH}_{\rm 3} {\rm COCN + 2NO}_{{\rm 2}} + \left( {{\rm OH}} \right) $\end{document}. The yield of HCHO for acrylonitrile and allylcyanide was found to be ca. 100 and 80%, and the stoichiometric reactions were assessed to proceed, \documentclass{article}\pagestyle{empty}\begin{document}$ \left( {{\rm OH}} \right) + {\rm CH}_{\rm 2} = {\rm CHCN + 2NO + 2O}_{\rm 2} \mathop {\hbox to 20pt{\rightarrowfill}}\limits^{1.0} {\rm HCHO + HCOCN + 2NO}_{\rm 2} + \left( {{\rm OH}} \right) $\end{document} and \documentclass{article}\pagestyle{empty}\begin{document}$ \left( {{\rm OH}} \right) + {\rm CH}_{\rm 2} = {\rm CHCH}_{\rm 2} {\rm CN + 2NO + 2O}_{\rm 2} \mathop {\hbox to 20pt{\rightarrowfill}}\limits^{0.8} {\rm HCHO + HCOCH}{\rm 2} {\rm CN + 2NO}_{\rm 2} + \left( {{\rm OH}} \right) $\end{document}, respectively. These results revealed that the reaction mechanism for these unsaturated organic cyanides are analogous to that of olefins.

Notes: Rates and thermodynamic data have been obtained for the reversible self-termination reaction: \documentclass{article}\pagestyle{empty}\begin{document}$${\rm R}^ \cdot + {\rm R}^ \cdot \mathop{\buildrel\longleftarrow\over\longrightarrow}^{2k1}_{2k_{-1}}D $$\end{document} Involving aromatic 2-(4′dimethylaminophenyl)indandione-1,3-yl (I), 2-(4′diphenylaminophenyl)indandione-1,3-yl (II), and 2,6 di-tert-butyl-4-(β-phthalylvinyl)-phenoxyl (III) radicals in different solvents. The type of solvent does not tangibly affect the 2k1 of Radical(I), obviously due to a compensation effect. The log(2k1) versus solvent parameter ET(30) curves for the recombination of radicals (II) and (III) have been found to be V shaped, the minimum corresponding to chloroform. The intensive solvation of Radical (II) by chloroform converts the initially diffusion-controlled recombination of the radical into an activated reaction. The log (2k-1) of the dimer of Radical (I) has been found to be a linear function of the Kirkwood parameter (ε - 1)/(2ε + 1), the dissociation rate increasing with the dielectic constant of the solvent. The investigation revealed an isokinetic relationship for the decay of the dimer of Radical (I), an isokinetic temperature β = 408 K and isoequilibrium relationship for the reversible recombination of Radical (I) with β° = 651 K. For Radical (I) dimer decay In(2k-1) = const + 0.8 In K, where K is the equilibrium constant of this reversible reaction. The transition state of Radical (I) dimer dissociation reaction looks more like a pair of radicals than the initial dimer. The role of specific solvation in radical self-termination reactions is discussed.

Notes: The thermal decomposition of SO2 and of the primary dissociation product SO have been studied in shock waves by the uv absorption technique. The controversy about SO2 dissociation data from uv absorption signals was resolved and attributed to the extensive overlap of SO2 and SO uv absorption spectra. The derived rate coefficients are k1/[Ar] = 1015.6 exp(-420 kJmol-1/RT) cm3mol-1 s-1 (temperature range 3000-5000 K) for SO2 dissociation, and k3/[Ar] = 1014.6 exp(-448 kJmol-1/RT) cm3 mol-1 s-1 (temperature range 4000-6000 K) for SO dissociation. Anomalously high values of the apparent collision efficiencies βc in SO2 dissociation are attributed to marked contributions from excited electronic states.

Notes: 5-Methyl-hexanone-2, 3-methyl-pentanone-2, and hexanone-2 have been decomposed in comparative rate single pulse shock tube experiments. The mechanism of decomposition involves the breaking of carbon-carbon bonds as well as molecular processes involving 6-center complexes. The following rate expressions at 1100 K have been obtained: \documentclass{article}\pagestyle{empty}\begin{document}$$ \begin{array}{rcl} k(3{\rm - methyl - pentanone - 2} \to {\rm CH}_{\rm 3} {\rm \dot CO} + {\rm sC}_4 {\rm H}_9 .) = 10^{16.4} \exp (- 38,300/T)/{\rm s} \\ k(5{\rm - methyl - hexanone - 2} \to {\rm CH}_{\rm 3} {\rm \dot CO} + {\rm iC}_4 {\rm H}_9 .) = 10^{16.6} \exp (- 40,600/T)/{\rm s} \\ k(5{\rm - methyl - hexanone - 2} \to {\rm CH}_{\rm 3} {\rm COCH}_{\rm 3} + {\rm iC}_4 {\rm H}_8) = 10^{12.56} \exp (- 31,600/T)/{\rm s} \\ k({\rm hexanone - 2} \to {\rm CH}_{\rm 3} {\rm COCH}_{\rm 3} + {\rm C}_3 {\rm H}_6) = 10^{13.28} \exp (- 32,400/T)/{\rm s} \\ \end{array} $$\end{document} These results lead to ΔHf(CH3ĊO) = - 13.8 kJ and ΔHf(CH3COCH2·) = - 12.6 kJ at 300 K. They are compared with existing literature values and some generalizations are made with regard to the stability of carbonyl compounds.

Notes: Kinetics of the incorporation of mercury(II) ion in tetra (p-trimethylammoniumphenyl)porphine have been investigated in aqueous solution at 30.0°C and 0.2 M (NaNO3) ionic strength. The reaction was found to be first order each in mercury(II) and the porphyrin. The forward (formation) and the reverse (dissociation) rate constants were found to be 1.9 ± 0.2 × 103 M-1 s-1 and 7 ± 2 × 106 M-1 s-1, respectively. Kinetics of zinc(II) incorporation in tetra(p-trimethylammoniumphenyl)porphine catalyzed by mercury(II) were also investigated. This catalysis is explained in terms of steady-state formation of mono mercury(II) porphyrin followed by zinc(II) displacement of mercury(II) ion from the porphyrin. Such a mechanism also illustrates the importance of porphyrin core deformation to metal incorporation.

Notes: The absolute rate constant for the OH + HCl reaction has been measured from 240 to 295 K utilizing the techniques of laser/flash photolysis-resonance fluorescence. The HCl concentrations were monitored continuously by ultraviloet and infrared spectrophotometry. The results can be fit to the following Arrhenius expression: \documentclass{article}\pagestyle{empty}\begin{document}$$k_1 = (4.6{\rm } \pm {\rm }0.3){\rm } \times {\rm }10^{ - 12} \exp [- (500{\rm } \pm {\rm }60)/T{\rm cm}^3 /{\rm molecule} \cdot {\rm s}$$\end{document} The rate constant values obtained in this study are 20-30% larger than those recommended previously for modeling of stratospheric chemistry.

Notes: The reaction \documentclass{article}\pagestyle{empty}\begin{document}${\rm Br} + {\rm CH}_3 {\rm CHO}\buildrel1\over\rightarrow{\rm HBr} + {\rm CH}_3 {\rm CO}$\end{document} has been studied by VLPR at 300 K. We find k1 = 2.1 × 1012 cm3/mol s in excellent agreement with independent measurements from photolysis studies. Combining this value with known thermodynamic data gives k-1 = 1 × 1010 cm3/mol s. Observations of mass 42 expected from ketene suggest a rapid secondary reaction: \documentclass{article}\pagestyle{empty}\begin{document}$${\rm Br} + {\rm CH}_3 {\rm CO}\buildrel2\over\rightarrow[{\rm CH}_3 {\rm COBr}]^* \buildrel3\over\rightarrow{\rm HBr} + {\rm CH}_2 {\rm CO}$$\end{document} in which step 2 is shown to be rate limiting under VLPR conditions and k2 is estimated at 1012.6 cm3/mol s from recent theoretical models for radical recombination. It is also shown that 0 ≤ E1 ≤ 1.4 kcal/mol using theoretical models for calculation of A1 and is probably closer to the lower limit. Reaction -1 is negligible under conditions used.

Notes: The effect of pressure on the rate constant of the OH + CO reaction has been measured for Ar, N2, and SF6 over the pressure range 200-730 torr. All experiments were at room temperature. The method involved laser-induced fluorescence to measure steady-state OH concentrations in the 184.9 nm photolysis of H2O-CO mixtures in the three carrier gases, combined with supplementary measurements of the CO depletion in these same carrier gases in the presence and absence of competing reference reactants. The effect of O2 on the pressure effect was determined. A pressure enhancement of the rate constant was observed for N2 and SF6, but not for Ar, within an experimental error of about 10%. The pressure effect for N2 was somewhat lower than previous literature reports, being about 40% at 730 torr. For SF6 a factor of two enhancement was seen at 730 torr. In each case it was found that O2 had no effect on the pressure enhancement. The roles of the radical species HCO and HOCO were evaluated.

Notes: The extinction coefficients and the decay kinetics of I2-. and (SCN)2-⋅ have been characterized over the 15-90°C-temperature range. The extinction coefficients of I2-⋅ at 385 and 725 nm were determined to be 10,000 and 2560M-1 cm-1, respectively, based on the extinction coefficient of (SCN)2-⋅ at 475 nm being equal to 7600M-1 cm-1. At these three wavelengths, all extinction coefficients were constant over the temperature range studied. The rate of decay of both I2-⋅ and (SCN)2-⋅ was found to be a function of I- and SCN- concentration, respectively, as well as temperature.