ALBERT

All Library Books, journals and Electronic Records Telegrafenberg

X
feed icon rss

Your email was sent successfully. Check your inbox.

An error occurred while sending the email. Please try again.

Proceed reservation?

Export
Filter
  • Chemistry  (5,475)
  • SPACE VEHICLES  (597)
  • STRUCTURAL MECHANICS  (281)
  • Humans
  • 1970-1974  (6,353)
  • 1972  (6,353)
Collection
Keywords
Publisher
Years
  • 1970-1974  (6,353)
Year
  • 1
    facet.materialart.
    Unknown
    Composite systems utilization for space shuttle structures (1972)
    In:  CASI
    Details
    Publication Date: 2005-11-30
    Description: Research and development of composite material systems to show applicability of these materials to shuttle structures and to demonstrate availability through a hardware development program is reported. The various configurations studied and potential areas of composite structures use are described and an outline of ongoing composite programs, complementing the indicated feasible applications, including a typical cost study, is shown. The following composite systems are investigated: Boron filaments with epoxy, polyimide, or aluminum matrix, and graphite filaments with epoxy or polyimide matrix.
    Keywords: SPACE VEHICLES
    Type: NASA Space Shuttle Technol. Conf.; p 605-644
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 2
    facet.materialart.
    Unknown
    Flight loads and control (1972)
    In:  CASI
    Details
    Publication Date: 2005-11-30
    Description: The prediction of flight loads and their potential reduction, using various control logics for the space shuttle vehicles, is very complex. Some factors, not found on previous launch vehicles, that increase the complexity are large lifting surfaces, unsymmetrical structure, unsymmetrical aerodynamics, trajectory control system coupling, and large aeroelastic effects. Discussed are these load producing factors and load reducing techniques. Identification of potential technology areas is included.
    Keywords: SPACE VEHICLES
    Type: NASA Space Shuttle Technol. Conf.; p 175-203
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 3
    facet.materialart.
    Unknown
    New considerations for pogo prevention on space shuttle (1972)
    In:  CASI
    Details
    Publication Date: 2005-11-30
    Description: Recommendations for improving the methodology of pogo suppression for the space shuttle include: Consideration of inter-pump location for accumulator or active device, inclusion of tank outflow effects in dynamic structural analysis, the use of simplified transfer functions in systems studies, three phase dynamic testing program for turbopump with development of dynamic flowmeters, and the use of a linearized mathematical model for engine physics studies.
    Keywords: SPACE VEHICLES
    Type: NASA, Washington NASA Space Shuttle Technol. Conf.; p 97-116
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 4
    facet.materialart.
    Unknown
    Development of methods for fracture control of space shuttle structures (1972)
    In:  CASI
    Details
    Publication Date: 2005-11-30
    Description: The technology with respect to fracture control requirements of the shuttle is considered. The current state-of-the-art does permit an approach based on linear elastic fracture mechanics concepts. Development and implementation of a fracture control plan should recognize deficiencies and provide adequate resources for the extensive empirical test data which are required. With respect to the cost impact of such tests, recent experiences involving advanced aircraft systems have seen unit cost increases of from 200 to 500 percent.
    Keywords: SPACE VEHICLES
    Type: NASA Space Shuttle Technol. Conf.; p 727-770
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 5
    facet.materialart.
    Unknown
    Docking devices for Soyuz-type spacecraft (1972)
    In:  CASI
    Details
    Publication Date: 2005-11-30
    Description: Two docking device designs for Soyuz-type spacecraft are compared. The first was flight tested successfully; the second achieves rigid and exact joining of two spacecraft, while incorporating changes to allow for the intravehicular transfer of crew members. The main functions of the docking device are considered, with the means by which they are accomplished, and measures for increasing its reliability and flexibility in service are noted.
    Keywords: SPACE VEHICLES
    Type: 6th Aerospace Mech. Symp.; p 143-150
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 6
    facet.materialart.
    Unknown
    Aerospace transporter and lifting body activities in Europe and potential participation in the development of the space shuttle orbiter (1972)
    In:  CASI
    Details
    Publication Date: 2005-11-30
    Description: The course of European aerospace research regarding reentry problems is briefly reviewed for the period from 1966 up to the present. The considerable experience gained by Europe, and particularly Germany, is shown to have led to their involvement and participation in the U.S. space shuttle program. The areas of investigation and expected contributions by European cooperation in the shuttle program are outlined.
    Keywords: SPACE VEHICLES
    Type: NASA. Langley Res. Center Space Shuttle Aerothermodyn. Technol. Conf., vol. 3; p 969-995
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 7
    facet.materialart.
    Unknown
    Status of reusable surface insulation thermal protection system technology programs (1972)
    In:  CASI
    Details
    Publication Date: 2005-11-30
    Description: The development of three low-density rigidized insulation materials for the shuttle TPS application is reported. These materials consist of one high purity silica system and two systems based on mullite, an aluminum silicate. Both systems consist of fibers joined together with appropriate binders to obtain a rigidized insulation composite. Both material systems require the application of a glassy coating to provide a wear resistant, high emittance surface and to prevent the absorption of water by the fiber matrix. The technology program has addressed the development of water impervious coatings, methods of assembling the materials in design concepts while minimizing the thermal stress in the insulation, achieving compatibility between the RSI material and the structural system, and test evaluations to demonstrate the feasibility of the surface insulation concept.
    Keywords: SPACE VEHICLES
    Type: NASA Space Shuttle Technol. Conf.; p 435-474
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 8
    facet.materialart.
    Unknown
    Overview of technology relative to the pogo instability on space shuttle (1972)
    In:  CASI
    Details
    Publication Date: 2005-11-30
    Description: The prediction of pogo contains a major source of uncertainty in the difficulty of defining the dynamic characteristics of certain components. An overview of the space shuttle technology with respect to each the following pogo problem areas is presented: structure, tank-liquid interaction, feedline, engine (pump), pogo-loop/control-loop interaction, and stability analysis.
    Keywords: SPACE VEHICLES
    Type: NASA Space Shuttle Technol. Conf.; p 117-138
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 9
    facet.materialart.
    Unknown
    Assessment of potential buffet problems on the space shuttle vehicle (1972)
    In:  CASI
    Details
    Publication Date: 2005-11-30
    Description: Buffet of the space shuttle launch and reentry configuration is an area requiring continued evaluation to produce a safe reliable vehicle of minimum weight. Buffet forces result from flow separation and therefore can not be predicted accurately. Buffet loads are highly sensitive to configuration, angle of attack, and Mach number and can be reliably determined only by wind tunnel tests of elastically scaled models.
    Keywords: SPACE VEHICLES
    Type: NASA Space Shuttle Technol. Conf.; p 25-43
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 10
    facet.materialart.
    Unknown
    Dynamic analysis for shuttle design verification (1972)
    In:  CASI
    Details
    Publication Date: 2005-11-30
    Description: Two approaches that are used for determining the modes and frequencies of space shuttle structures are discussed. The first method, direct numerical analysis, involves finite element mathematical modeling of the space shuttle structure in order to use computer programs for dynamic structural analysis. The second method utilizes modal-coupling techniques of experimental verification made by vibrating only spacecraft components and by deducing modes and frequencies of the complete vehicle from results obtained in the component tests.
    Keywords: SPACE VEHICLES
    Type: NASA Space Shuttle Technol. Conf.; p 205-230
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 11
    facet.materialart.
    Unknown
    Surface studies on Surveyor 3 tubing sections (1972)
    In:  CASI
    Details
    Publication Date: 2005-11-30
    Description: Sections C and E of the unpainted, polished aluminum tubing from the strut of the radar altimeter and Doppler velocity sensor were examined in a transmission electron microscope for micrometeorite damage and ion bombardment. Both sections were contaminated and eroded on one side; it is suggested that these conditions were caused by sandblasting by lunar dust and retrorocket plume contamination during Surveyor 3 landing. Microcraters of different configurations were found on the bright sides of the tubes. Several degrees of violence were involved in the formation of the craters, and the particle size could be responsible for some differences. All micropits found were on the bright areas and data indicate 0.2 hypervelocity impact/sq cm and 2/sq cm for other types of craters. The greatest degree of damage resulted from particle impact and was limited to a maximum depth of 2 microns.
    Keywords: SPACE VEHICLES
    Type: NASA, Washington Analysis of Surveyor 3 Mater. and Phot. Returned by Apollo 12; p 154-158
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 12
    facet.materialart.
    Unknown
    Aerodynamic studies of delta-wing shuttle orbiters. Part 2: Hypersonics (1972)
    In:  CASI
    Details
    Publication Date: 2005-11-30
    Description: An early version of an external hydrogen-oxygen tank orbiter was used as a baseline vehicle to experimentally evaluate: (1) nose shape and canopy effects on longitudinal, lateral, and directional stability and trim, and (2) yaw due to aerodynamic roll control at hypersonic speeds. Nose alterations were examined since that part of the vehicle may be subject to modifications because of internal packaging requirements, alleviation of potential high heating areas, and/or possible improvements in aerodynamic stability and control. There was also some concern about the effect of the rather high profile canopy on the aerodynamics; therefore its removal was examined. In addition, roll-yaw coupling was investigated because of its impact on the RCS fuel requirements for entry maneuvers.
    Keywords: SPACE VEHICLES
    Type: Space Shuttle Aerothermodyn. Technol. Conf., vol. 3; p 803-830
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 13
    facet.materialart.
    Unknown
    Impact of subsonic aerodynamic considerations on a space shuttle booster configuration (1972)
    In:  CASI
    Details
    Publication Date: 2005-11-30
    Description: Considerations of cruise-back efficiency and subsonic flying qualities are shown to have resulted in a configuration with an aft high wing of moderate aspect ratio and with vertical tails located at the wing tips. The need to protect the air breathing engines during ascent and reentry and the desire for a low trim penalty longitudinal control surface led to consideration of a jet-flap canard. The advantages of this application of STOL technology to a space system are examined and the results of both wind tunnel tests and flight simulations are discussed. Since the use of the jet-flap canard concept offers the potential for a minimum weight vehicle, a proposed technology development program is outlined in order that the full benefit of this concept may be realized.
    Keywords: SPACE VEHICLES
    Type: NASA. Langley Res. Center Space Shuttle Aerothermodyn. Technol. Conf., vol.3; p 737-784
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 14
    facet.materialart.
    Unknown
    On the possibility of Earth reentry simulation of shallow angle Jupiter entry (1972)
    In:  CASI
    Details
    Publication Date: 2005-11-30
    Description: Possible Earth reentry simulation of shallow-angle (3 to 30 deg) Jupiter entry was investigated in terms of four parameters of the bow shock layer ahead of a blunt vehicle: peak (equilibrium) temperature, peak pressure, peak inward radiative flux, and time-integrated radiative flux. It is shown that simulation ranging from fair to good can be achieved. Reentry is easiest (lowest Earth reentry speed) at steep Earth reentry, in the Earth entry speed range of 15 to 22 km/sec, for both the Jupiter nominal and cool atmospheres. Increased Earth speed is required, generally, for increasing Jupiter entry angle, and for increasing temperature, radiative flux, time-integrated flux and pressure, in that order.
    Keywords: SPACE VEHICLES
    Type: JPL Quart. Tech. Rev., Vol. 1, No. 4; p 19-29
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 15
    facet.materialart.
    Unknown
    Assessment of advances in structural analysis for space shuttle (1972)
    In:  CASI
    Details
    Publication Date: 2005-11-30
    Description: The latest technology for structural analysis in relation to the design tasks that lie ahead for the space shuttle is reviewed. For shell-of-revolution structures, the analysis can be formulated as a one-dimensional problem which is readily solved by using finite-difference or numerical-integration techniques. For more general asymmetric shells, a two-dimensional formulation is required. However, the governing equations are readily formulated and are amenable to solution by finite-difference techniques. For a completely general structural arrangement, such as structural frameworks, recourse is usually made to discretized formulations using finite elements. Of course, the finite-element programs could be used for shell structures, but at a loss in accuracy and increase in computer time compared with the special purpose programs.
    Keywords: STRUCTURAL MECHANICS
    Type: NASA Space Shuttle Technol. Conf.; p 685-725
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 16
    facet.materialart.
    Unknown
    Application of composite materials to space shuttle tanks (1972)
    In:  CASI
    Details
    Publication Date: 2005-11-30
    Description: Tanks are broken down into two categories: pressure vessels that carry primarily pressure loads, and structural tanks that carry structural loads such as thrust or bending in addition to pressure. A significant portion of the shuttle orbiter structure are tanks and in order to minimize both weight and cost growth on these shuttle tank structures, composite material tanks of both types are considered.
    Keywords: SPACE VEHICLES
    Type: NASA Space Shuttle Technol. Conf.; p 573-603
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 17
    facet.materialart.
    Unknown
    Advanced design concepts for shuttle airframe structure (1972)
    In:  CASI
    Details
    Publication Date: 2005-11-30
    Description: The development of weight-saving advanced design concepts for shuttle airframe structure is presented. Design concepts under investigation employ selective composite reinforcement and/or efficient geometric arrangements. An effort to develop metallic panel designs which exploit the relaxation of smooth external-surface requirements for skin structure is reviewed. Available highlights from research and development studies which investigate the application of composite reinforcement to the design of two types of fuselage panels, a shear web, a large fuselage frame, and a landing-gear-door assembly are presented. Preliminary results from these studies suggest weight savings of 25 percent can be obtained.
    Keywords: SPACE VEHICLES
    Type: NASA Space Shuttle Technol. Conf.; p 537-572
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 18
    facet.materialart.
    Unknown
    Flutter technology for space shuttle (1972)
    In:  CASI
    Details
    Publication Date: 2005-11-30
    Description: The development of analytical and experimental techniques needed to predict space shuttle flutter boundaries and insure adequate flutter margins and anticipated problems associated with aeroelastic-model and full-scale testing to validate flutter clearance are considered. Results illustrating the best available tools for subsonic and supersonic flutter prediction are presented. Programs currently underway which will help overcome the difficult problems envisioned for the transonic wind-tunnel and flight flutter test program are also discussed.
    Keywords: SPACE VEHICLES
    Type: NASA Space Shuttle Technol. Conf.; p 1-24
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 19
    facet.materialart.
    Unknown
    Gas-powered reentry body erection mechanism (1972)
    In:  CASI
    Details
    Publication Date: 2005-11-30
    Description: The design, analysis, testing, and flight of the supersonic planetary entry decelerator 2 spacecraft are described. The vehicle was launched in a folded condition and deployed to its required configuration following exit from the atmosphere. This concept was selected primarily because it allows utilization of existing launch vehicle systems in the most economical manner possible.
    Keywords: SPACE VEHICLES
    Type: 6th Aerospace Mech. Symp.; p 101-107
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 20
    facet.materialart.
    Unknown
    Satellite temperature correlation of predicted, test, and flight data (1972)
    In:  CASI
    Details
    Publication Date: 2005-11-30
    Description: This study compares satellite temperature predictions with thermal vacuum test results and shows the improvement from testing. Orbital data were compared with prediction/test results to determine quantitatively an expected error criteria.
    Keywords: SPACE VEHICLES
    Type: NASA. Goddard Space Flight Center Space Simulation; p 425-443
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 21
    facet.materialart.
    Unknown
    Experiments on the dynamic stability of the space shuttle (1972)
    In:  CASI
    Details
    Publication Date: 2005-11-30
    Description: Some dynamic stability experiments on the space shuttle using a half-model oscillatory technique are discussed. Resulting information from the experiments is presented and includes: (1) dynamic pitching characteristics of both the orbiter and the booster alone as well as of the two models mated into a single launch configuration; (2) the static and dynamic interference effects during an abort separation maneuver; and (3) the dynamic plume interference effect.
    Keywords: SPACE VEHICLES
    Type: NASA. Langley Res. Center Space Shuttle Aerothermodyn. Technol. Conf., vol. 3; p 933-968
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 22
    facet.materialart.
    Unknown
    Dynamic testing for shuttle design verification (1972)
    In:  CASI
    Details
    Publication Date: 2005-11-30
    Description: Space shuttle design verification requires dynamic data from full scale structural component and assembly tests. Wind tunnel and other scaled model tests are also required early in the development program to support the analytical models used in design verification. Presented is a design philosophy based on mathematical modeling of the structural system strongly supported by a comprehensive test program; some of the types of required tests are outlined.
    Keywords: SPACE VEHICLES
    Type: NASA Space Shuttle Technol. Conf.; p 231-265
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 23
    facet.materialart.
    Unknown
    Neuter docking mechanism study (1972)
    In:  CASI
    Details
    Publication Date: 2005-11-30
    Description: Neuter (or androgynous) docking systems that allow space vehicles with similar or identical docking hardware to dock are discussed. Basic requirements applicable to docking mechanism design, four neuter concepts that were studied, and the concept selected by the NASA Manned Spacecraft Center for detailed investigation are presented.
    Keywords: SPACE VEHICLES
    Type: 6th Aerospace Mech. Symp.; p 43-49
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 24
    facet.materialart.
    Unknown
    Aerodynamic studies of delta-wing shuttle orbiters. Part 1: Low speed (1972)
    In:  CASI
    Details
    Publication Date: 2005-11-30
    Description: Numerous wind tunnel tests conducted on the evolving delta-wing orbiters have generated a fairly large aerodynamic data base over the entire entry operation range of these vehicles. A limited assessment is made of some of the aerodynamics of the current HO type orbiters, and several specific problem areas selected from the broad data base are discussed. These include, from a subsonic viewpoint, discussions of trim drag effect; effects of the installation of main rocket engine nozzles, OMS and RCS packages, Reynolds number effects, lateral-directional stability characteristics, and landing characteristics.
    Keywords: SPACE VEHICLES
    Type: Space Shuttle Aerothermodyn. Technol. Conf., vol. 3; p 785-802
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 25
    facet.materialart.
    Unknown
    Wing optimization for space shuttle orbiter vehicles (1972)
    In:  CASI
    Details
    Publication Date: 2005-11-30
    Description: The results were presented of a parametric study performed to determine the optimum wing geometry for a proposed space shuttle orbiter. The results of the study establish the minimum weight wing for a series of wing-fuselage combinations subject to constraints on aerodynamic heating, wing trailing edge sweep, and wing over-hang. The study consists of a generalized design evaluation which has the flexibility of arbitrarily varying those wing parameters which influence the vehicle system design and its performance. The study is structured to allow inputs of aerodynamic, weight, aerothermal, structural and material data in a general form so that the influence of these parameters on the design optimization process can be isolated and identified. This procedure displays the sensitivity of the system design of variations in wing geometry. The parameters of interest are varied in a prescribed fashion on a selected fuselage and the effect on the total vehicle weight is determined. The primary variables investigated are: wing loading, aspect ratio, leading edge sweep, thickness ratio, and taper ratio.
    Keywords: SPACE VEHICLES
    Type: NASA. Langley Res. Center Space Shuttle Aerothermodyn. Technol. Conf., vol. 3; p 831-860
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 26
    facet.materialart.
    Unknown
    Status of Langley studies of aerodynamics and interference effects of tandem launch vehicles (1972)
    In:  CASI
    Details
    Publication Date: 2005-11-30
    Description: Some of the aerodynamic and interference effects measured from wind-tunnel tests of three fully reusable space shuttle configurations at transonic and low-supersonic speeds are presented, and the status is given of an assessment of the analytical approach to date. The three configurations tested were a low-fineness-ratio booster combined in tandem with a delta-wing orbiter, designated the "low-fineness-ratio configuration,' and a phase B shuttle configuration consisting of the delta-wing orbiter and high-fineness-ratio booster, designated the "stage-arrangement configuration,' arranged in tandem and in parallel. The force measurements obtained at a Mach number of 1.5 for the low-fineness-ratio configuration were representative of the transonic and low-supersonic speed ranges where the interference effects are predominant and were used for comparison with values calculated at the same Mach number. This comparison is the basis for a preliminary assessment of the initial application of the analytical approach.
    Keywords: SPACE VEHICLES
    Type: Space Shuttle Aerothermodyn. Technol. Conf., vol. 3; p 707-736
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 27
    facet.materialart.
    Unknown
    Some contamination problems in the European TD satellite (1972)
    In:  CASI
    Details
    Publication Date: 2009-11-16
    Description: Materials were selected for the European TD satellite with a view to avoiding contamination of its stellar ultraviolet telescopes. Materiels were selected using the micro-VCM technique, and some typical cases of materials evaluation are described. The cleanliness of the satellite was monitored during integration and test phases, and in particular during long duration thermal vacuum tests.
    Keywords: SPACE VEHICLES
    Type: NASA. Goddard Space Flight Center Space Simulation; p 613-627
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 28
    facet.materialart.
    Unknown
    Statistical distribution of spacecraft maximum structural response. (1972)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Under nonstationary random excitations resulting from booster engine shutdown, a direct statistical analysis of spacecraft maximum response is performed, and the spacecraft structural reliability is obtained. It is found that the Gumbel (1958) Type I asymptotic distribution of maximum values provides a reasonably good statistical model for spacecraft maximum responses. This approach makes it possible to perform the reliability-based optimum design of spacecraft structures.
    Keywords: SPACE VEHICLES
    Type: Journal of Spacecraft and Rockets; 9; Jan. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 29
    facet.materialart.
    Unknown
    Thermal design verification testing for the ATS-F and -G spacecraft. (1972)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: There is a wide fluctuation in the internal power dissipation from the components within the earth viewing module (EVM). The electronic component functional reliability required for a two-to-five year mission is the most significant factor for the thermal design criteria. A mathematical thermal model of the EVM and the orbital environment is used to predict the performance of the thermal control system. Comparisons of the results obtained in chamber thermal balance tests with the data computed on the basis of the theoretical model provide the means for validating the thermal design.
    Keywords: SPACE VEHICLES
    Type: Journal of Environmental Sciences; 15; Mar
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 30
    facet.materialart.
    Unknown
    Finite elements of nonlinear continua. (1972)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The finite element method is extended to a broad class of practical nonlinear problems, treating both theory and applications from a general and unifying point of view. The thermomechanical principles of continuous media and the properties of the finite element method are outlined, and are brought together to produce discrete physical models of nonlinear continua. The mathematical properties of the models are analyzed, and the numerical solution of the equations governing the discrete models is examined. The application of the models to nonlinear problems in finite elasticity, viscoelasticity, heat conduction, and thermoviscoelasticity is discussed. Other specific topics include the topological properties of finite element models, applications to linear and nonlinear boundary value problems, convergence, continuum thermodynamics, finite elasticity, solutions to nonlinear partial differential equations, and discrete models of the nonlinear thermomechanical behavior of dissipative media.
    Keywords: STRUCTURAL MECHANICS
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 31
    facet.materialart.
    Unknown
    Dynamic response analysis of geometrically non-linear structures subjected to high impact. (1972)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Description of an efficient digital computer method for the determination of the propagation of elastic stresses and deformations in certain geometrically nonlinear structures subjected to high impact loading. The finite-element matrix displacement approach utilizing curved quadrilateral shell elements in conjunction with a nodewise predictor-corrector method employing Runge-Kutta extrapolation techniques has been adopted for the present solution. The related computer program written in FORTRAN V for the UNIVAC 1108 computer has proved to be effective for the solution of a range of practical problems including rectangular and cylindrical panels. Numerical results are presented for a relevant structure, the cell container, and the negative electrode of an impact-resistant battery subjected to high impact, simulating its free landing on a planetary surface.
    Keywords: STRUCTURAL MECHANICS
    Type: International Journal for Numerical Methods in Engineering; 4; Mar
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 32
    facet.materialart.
    Unknown
    The space shuttle and its uses. (1972)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The development of reusable space-shuttle vehicles has been made practical by the availability of improved staged-combustion engines and durable thermal protection systems. A two-state launch configuration with fully reusable booster and orbiter elements is considered to be the best design solution, and size specifications for such a vehicle are examined as a function of launch costs. Significant vehicle characteristics are explained in terms of cargo bay dimensions, cross-range maneuvering capability, mission duration requirements, engine characteristics, and acceleration constraints. Shuttle flight activities include satellite deployment and repair, sortie missions for short-duration research purposes, and space station support operations. Phases of the development program are outlined, and structural details of several candidate space shuttle concepts are illustrated.
    Keywords: SPACE VEHICLES
    Type: Aeronautical Journal; 76; Jan. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 33
    facet.materialart.
    Unknown
    Shuttle ascent guidance and control. (1972)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The requirements of a unified optimal guidance scheme are discussed, giving attention to a general formulation, aspects of self-targeting, problems of optimum guidance within the atmosphere, and a unified concept for all flight phases. Since no previous guidance scheme meets these requirements, the shuttle demands a fundamentally new approach. A new unified optimal guidance scheme, called Mascot, was developed. The capabilities of Mascot include the real-time solution of general trajectory-optimization problems and the unification of guidance for all flight phases.
    Keywords: SPACE VEHICLES
    Type: Astronautics and Aeronautics; 10; Feb. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 34
    facet.materialart.
    Unknown
    Flying automated laboratories to the planets. (1972)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Review of results obtained by instrumented spacecraft in investigation of the planets, mainly Mars. It appears that Mars is a world of varying topographical structure, some of which must have been created by the same processes that sculptured the moon and by others thus far unique in the solar system. The atmosphere is too thin to shield the surface, and there are no traces of liquid water. The very large recent dust storm is discussed. Mariner 9 has revealed definite indication of probable volcanic activity on Mars in recent geologic times.-
    Keywords: SPACE VEHICLES
    Type: Teledyne Ryan Aeronautical Reporter; 33; Spring 1
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 35
    facet.materialart.
    Unknown
    Buckling of nearly cylindrical shells under lateral pressure. (1972)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The effect of slight meridional curvature on the buckling of shells subjected to an external constant directional lateral pressure is examined. A class of nearly cylindrical shells with constant meridional curvature, a central radius-to-thickness ratio of 500, and central rise-to-shell-length ratios varying from plus 5% to minus 5% is considered. A brief study is presented of the dependence of the critical lateral pressure on the meridional curvature and on the length and meridional edge restraint.
    Keywords: STRUCTURAL MECHANICS
    Type: AIAA Journal; 10; Feb. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 36
    facet.materialart.
    Unknown
    Effect of a slot on the buckling load of a cylindrical shell with a circular cutout. (1972)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The results are discussed of a study of the effect of slots on the buckling of cylinders with circular holes of systematically varied circularity. The results obtained suggest that the substantial increase in the buckling loads of cylindrical shells resulting from increases in slot length is due to a relief of the bending stress field.
    Keywords: STRUCTURAL MECHANICS
    Type: AIAA Journal; 10; Feb. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 37
    facet.materialart.
    Unknown
    Experimental investigation of strains in fabric under biaxial and shear forces. (1972)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The paper defines the experimental phase of an objective to obtain the mechanical characteristics and coefficients required by the generalized form of Hooke's law for nylon-polyurethane-coated fabric. Test specimens were cylindrical fabric sleeves and were loaded in axial tension by an Instron, in hoop tension by pressurizing, and in shear by a torquing fixture. An extensive amount of strain data is included for a wide combination of the three membrane loads. The tests indicate highly nonlinear stress-strain characteristics of the fabric and a strong dependency on all three membrane loads.
    Keywords: STRUCTURAL MECHANICS
    Type: Journal of Aircraft; 9; Jan. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 38
    facet.materialart.
    Unknown
    Skylab status report. (1972)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The laboratory will be launched on Apr. 30, 1973, aboard a Saturn V vehicle. Approximately twenty-three and a half hours later the first crew will be launched in a command and service module aboard a Saturn IB launch vehicle. The laboratory will consist of modules. The orbital workshop (OWS) is made from the liquid oxygen and liquid hydrogen tanks of a Saturn S-IVB third stage. The OWS contains the living quarters and two experiments areas. The airlock sits on top of the OWS and contains the controls and hatch for the extra-vehicular activity.
    Keywords: SPACE VEHICLES
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 39
    facet.materialart.
    Unknown
    Small-scale wind shear definition for aerospace vehicle design. (1972)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Rawinsonde wind profile data provide adequate wind shear information for vertical height intervals greater than 1 km. To specify wind shears for intervals below 1 km for space vehicle design, detailed wind-profile information like that provided by the FPS-16 Radar/Jimsphere system or an extrapolation procedure is required. This paper is concerned with the latter alternative. It is assumed that any realization from an ensemble of wind profiles can be represented in terms of a Fourier integral. This permits the calculation of the ensemble standard deviation and mean of the corresponding shear ensemble for any altitude and shear interval in terms of the power spectrum of the ensemble of wind profiles. The results of these calculations show that the mean and standard deviation of the wind shear ensemble, as well as the wind shear for any percentile, asymptotically behave like the vertical interval to the 0.7 power. This result is in excellent agreement with shear data from Cape Kennedy, Fla.
    Keywords: SPACE VEHICLES
    Type: Journal of Spacecraft and Rockets; 9; Feb. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 40
    facet.materialart.
    Unknown
    Sonic-boom-induced building structure responses including damage. (1972)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Concepts of sonic-boom pressure loading of building structures and the associated responses are reviewed, and results of pertinent theoretical and experimental research programs are summarized. The significance of sonic-boom load time histories, including waveshape effects, are illustrated with the aid of simple structural elements such as beams and plates. Also included are discussions of the significance of such other phenomena as three-dimensional loading effects, air cavity coupling, multimodal responses, and structural nonlinearities. Measured deflection, acceleration, and strain data from laboratory models and full-scale building tests are summarized, and these data are compared, where possible, with predicted values. Damage complaint and claim experience due both to controlled and uncontrolled supersonic flights over communities are summarized with particular reference to residential, commercial, and historic buildings. Sonic-boom-induced building responses are compared with those from other impulsive loadings due to natural and cultural events and from laboratory simulation tests.
    Keywords: STRUCTURAL MECHANICS
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 41
    facet.materialart.
    Unknown
    Shuttle status report. (1972)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The Space Shuttle Program is still in Phase B, a phase consisting predominantly of paper analyses and trade studies leading to the selection of a single design. A brief history of the program up to Phase B is discussed together with the results of the original year-long Phase B effort, and the objectives of the Phase B extension currently in work. A Lockheed study is discussed together with a Grumman/Boeing study, Phase B contractor results, displays and controls, simulations, and the flight test.
    Keywords: SPACE VEHICLES
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 42
    facet.materialart.
    Unknown
    Establishing an upper bound for window response to the sonic boom. (1972)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Study of the failure of glass windows, which is probably the most severe problem confronting the SST program outside of the psychological and sociological aspects. The structural configuration most likely to suffer a window failure due to sonic boom excitation is one representable by a single large room, a single large window, and an open door. It is suggested that if the open door were replaced with another window the resultant stresses in both windows would be substantially reduced.
    Keywords: STRUCTURAL MECHANICS
    Type: Journal of Sound and Vibration; 21; Mar. 22
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 43
    facet.materialart.
    Unknown
    Matrix transformations for spacecraft attitude determination. (1972)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Keywords: SPACE VEHICLES
    Type: Planetary and Space Science; 20; Oct. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 44
    facet.materialart.
    Unknown
    Plane elastostatic analysis of V-notched plates. (1972)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Solutions are given for several plane elastostatic problems of plates having a V-notch on one edge, and subjected to a variety of boundary conditions. The effect of the magnitude of the V-notch angle and specimen geometry on stress intensity factors KI and KII are obtained for unloaded notch surfaces. There is less than one per cent difference in opening model stress intensity factor in going from a zero degree notch angle to a 30 degree notch angle. Notch opening displacements at the plate edge were measured experimentally, and the results obtained were in excellent agreement with the computed results.
    Keywords: STRUCTURAL MECHANICS
    Type: International Journal of Fracture Mechanics; 8; Sept
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 45
    facet.materialart.
    Unknown
    Study of fatigue crack initiation from flaws using fracture mechanics theory. (1972)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Keywords: STRUCTURAL MECHANICS
    Type: Engineering Fracture Mechanics; 4; June 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 46
    facet.materialart.
    Unknown
    Panel-flutter analysis of a thermal protection-shield concept for the space shuttle. (1972)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Analysis of the panel flutter characteristics of a candidate thermal protection system (TPS) for the space shuttle, using piston theory aerodynamics and Lagrange equations. The results show the TPS candidate panel array to be deep in the 'no-flutter' region during launch and, therefore, safe from panel flutter.
    Keywords: STRUCTURAL MECHANICS
    Type: AIAA Journal; 10; Aug. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 47
    facet.materialart.
    Unknown
    Rayleigh wave effects in an elastic half-space. (1972)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Consideration of Rayleigh wave effects in a homogeneous isotropic linearly elastic half-space subject to an impulsive uniform disk pressure loading. An approximate formula is obtained for the Rayleigh wave effects. It is shown that the Rayleigh waves near the center of loading arise from the portion of the dilatational and shear waves moving toward the axis, after they originate at the edge of the load disk. A study is made of the vertical displacement due to Rayleigh waves at points on the axis near the surface of the elastic half-space.
    Keywords: STRUCTURAL MECHANICS
    Type: AIAA Journal; 10; Aug. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 48
    facet.materialart.
    Unknown
    Strongly coupled stress waves in heterogeneous plates. (1972)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Consideration of coupled stress waves generated by an impulsive load applied at one end of a semiinfinite plate. For the field equations governing the one-dimensional coupled waves a hyperbolic system of equations is obtained in which a strong coupling in the second derivatives exists. The method of characteristics described by Chou and Mortimer (1967) is extended to cover the case of strong coupling, and a study is made of the transient stress waves in a semiinfinite plate subjected to an initial step input. Coupled discontinuity fronts are found to propagate at different velocities. The normal plate stress and the bending moment at different time regimes are illustrated by graphs.
    Keywords: STRUCTURAL MECHANICS
    Type: AIAA Journal; 10; Aug. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 49
    facet.materialart.
    Unknown
    Orbital propellant depot system. (1972)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Review of some of the problems involved in the design of a long-term propellant storage depot in earth orbit to act as a resupply station for cargo/personnel shuttles between earth orbit and lunar orbit, between low earth orbit and synchronous orbit, and possibly for use with interplanetary probes. The problems discussed pertain essentially to the long-term storage and propellant transfer capabilities.
    Keywords: SPACE VEHICLES
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 50
    facet.materialart.
    Unknown
    A halo-orbit lunar station. (1972)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: A relay satellite following a halo trajectory will always maintain line-of-sight contact with the earth and the moon's far side. The Integrated Program Plan for lunar exploration in the 1980s and beyond calls for a fully reusable earth-moon transportation system. The principal elements of the system are a Translunar Shuttle, a Lunar-Orbit Space Station or Halo-Orbit Space Station, and a Lunar Space Tug. It is shown that a halo-orbit space station could offer important operational and performance advantages compared to a lunar-orbit station in a second-generation lunar program.
    Keywords: SPACE VEHICLES
    Type: Astronautics and Aeronautics; 10; June 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 51
    facet.materialart.
    Unknown
    Self-contamination and environment of an orbiting satellite. (1972)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The flux of molecules emitted by the satellite and subsequently returning to its surface is investigated. The reflection occurs upon collision of these with ambient molecules. The evaluation of this flux is carried out from a knowledge of the outgassing rate of the satellite, its dimensions, and the orbit parameters. Condensation rates and adsorption layers on critical surfaces are calculated from the knowledge of this flux, and from the natures and temperatures of the gas and the surface. The calculation of these parameters, based on estimated and in some cases measured emission rates, has been carried out for a number of satellites. These developed relationships and graphs allow the estimation of several important parameters for an orbiting satellite. This report presents the pressures and densities at various distances from the satellite as produced by the surrounding ambient molecules and by the outgassing of the satellite.
    Keywords: SPACE VEHICLES
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 52
    facet.materialart.
    Unknown
    Thin-film light-intensity measurement strain-analysis technique. (1972)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The optical response to loading of a thin metallic film deposited on a low-modulus structural substrate is studied theoretically and experimentally. Two types of optical properties called total and central-image transmittance (or reflectance) are shown to be related to the mechanical state of the substrate. Empirical optical-mechanical relationships are proposed between these optical properties and the substrate strain field of a general plane-stress problem. A technique based on wrinkle and microfracture patterns is described for determining principal directions of strain. Experimental results for uniaxially loaded specimens show that it is possible to obtain a nearly linear relationship between transmittance and strain for certain materials combinations.
    Keywords: STRUCTURAL MECHANICS
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 53
    facet.materialart.
    Unknown
    A non-linear dynamic lumped-parameter model of a rectangular plate. (1972)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: A lumped-parameter model of a rectangular plate is developed by assuming fundamental mode solutions and using Hamilton's Principle and the Euler equations to set up the differential equation of motion for the system. The plate theory used may be described as the dynamic analogue of the von Karman large-deflection theory. Four sets of symmetrical boundary conditions are considered with the restriction of uniform pressure dynamic loads. The model takes the form of a mass on a cubic-hardening spring with each term defined by algebraic expressions of the plate parameters. The results for some specific problems are compared with two previous solutions. This method is less accurate but simpler to develop and apply.
    Keywords: STRUCTURAL MECHANICS
    Type: Journal of Sound and Vibration; 21; Apr. 8
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 54
    facet.materialart.
    Unknown
    Solution of eigenvalue problems by Sturm sequence method. (1972)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: A generalized eigenvalue algorithm is presented herein along with the complete listing of the associated computer program, which may be conveniently utilized for the efficient solution of certain broad classes of eigenvalue problems. Extensive applications of the procedure are envisaged in the analysis of many important engineering problems, such as stability and natural frequency analysis of practical discrete structural systems, idealized by the finite element technique. The procedure based on the Sturm sequence method is accurate and fast, possessing several significant advantages over other known methods of such analysis. Numerical results are also presented for two representative structural engineering problems.
    Keywords: STRUCTURAL MECHANICS
    Type: International Journal for Numerical Methods in Engineering; 4; May-June
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 55
    facet.materialart.
    Unknown
    Effect of a circular hole on the buckling of cylindrical shells loaded by axial compression. (1972)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: An experimental and analytical investigation of the effect of a circular hole on the buckling of thin cylindrical shells under axial compression was carried out. The experimental results were obtained from tests performed on seamless electroformed copper shells and Mylar shells with a lap joint seam. These results indicated that the character of the shell buckling was dependent on a parameter which is proportional to the hole radius divided by the square root of the product of the shell radius and thickness. For small values of this parameter, there was no apparent effect of the hole on the buckling load. For slightly larger values of the parameter, the shells still buckled into a general collapse configuration, but the buckling loads were sharply reduced as the parameter increased. For still larger values of the parameter, the buckling loads were further reduced, and the shells buckled into a stable local buckling configuration.
    Keywords: STRUCTURAL MECHANICS
    Type: AIAA Journal; 10; Nov. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 56
    facet.materialart.
    Unknown
    Boron-aluminum structural component for Shuttle. (1972)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: A boron-aluminum structural component, representative of Space Shuttle fuselage structure, has been fabricated and tested as part of a program to demonstrate boron-aluminum feasibility for Shuttle applications. The 4- by 5-foot component consists of eleven 24-ply Z section stringers and a +45 degree 8-ply skin. It was tested at room temperature and at 500 F under combined compressive and shear loadings. The components for this program were fabricated in order to encounter and solve scale-up problems, and to obtain test data representative of production hardware. The data from this program are expected to allow more accurate prediction of weights and costs of boron-aluminum structures for the Space Shuttle.
    Keywords: STRUCTURAL MECHANICS
    Type: SAMPE Quarterly; 3; July 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 57
    facet.materialart.
    Unknown
    Parameters influencing dynamic stability characteristics of Viking-type entry configurations at Mach 1.76. (1972)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Free-oscillation tests of three Viking-type blunt conical configurations were conducted in a wind tunnel to determine the important variables influencing their dynamic stability characteristics at Mach 1.76. The effects of sting geometry are shown to be significant at low angles of attack, while the effects of cross plane motions and tunnel vibration characteristics appear to be negligible. Variation of the reduced-frequency parameter and model base geometry caused significant effects in the data. An approximate technique was developed for converting effective data from either forced-oscillation or free-oscillation tests to values based on the instantaneous angle of attack.
    Keywords: SPACE VEHICLES
    Type: Journal of Spacecraft and Rockets; 9; July 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 58
    facet.materialart.
    Unknown
    Stored energy function of rubberlike materials derived from simple tensile data. (1972)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: An explicit formulation is developed to obtain the stored energy function, based on the Valanis-Landel separable symmetric stored energy function. This formulation is applicable to any multiaxial stress state, from simple tensile data alone, for those cases in which the stored energy function is a separable function of the stretch ratios. By direct comparison, it is also shown that styrene butadiene rubber, at least over a specific range, follows this postulated separable form.
    Keywords: STRUCTURAL MECHANICS
    Type: Journal of Applied Physics; 43; July 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 59
    facet.materialart.
    Unknown
    Axisymmetric buckling of uniformly loaded spherical caps undergoing plastic deformation. (1972)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Keywords: STRUCTURAL MECHANICS
    Type: AIAA Journal; 10; Dec. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 60
    facet.materialart.
    Unknown
    Fatigue and fracture basic research at the Langley Research Center. (1972)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: This paper gives some examples of projects underway. The projects are grouped according to the primary parameter being studied: loads, configuration, environment, or material. Significant topics include the effect of truncated loads, the effect of proof-tests, interference fasteners, accelerated and real-time tests for supersonic aircraft materials, crack-growth rates in built-up structures, and a model method by which material can be selected for a particular set of operating conditions.
    Keywords: STRUCTURAL MECHANICS
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 61
    facet.materialart.
    Unknown
    Collocated interfacial stress intensity factors for finite bi-material plates. (1972)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: This paper deals with elastic stress intensity factors associated with stress fields near partially debonded interfaces in finite, bi-material plates. Bi-material stress intensity factors K1 and K2 are not associated, respectively, with symmetric and skew-symmetric loading and are functions of an arbitrary length parameter. Any fracture condition involving bi-material stress intensity factors must be independent of the arbitrary length parameter and must be consistent with experiment. We define a new parameter called the interfacial stress intensity factor which satisfies the former condition. A truncated Williams power series stress function for stresses in a cracked bi-material plate, as modified by Sih and Rice, is used with a modified boundary collocation procedure to generate interfacial stress intensity factors for finite bi-material plates.
    Keywords: STRUCTURAL MECHANICS
    Type: Engineering Fracture Mechanics; 4; Dec. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 62
    facet.materialart.
    Unknown
    Space-Shuttle applications. (1972)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Discussion of the performance potential of the Space Shuttle and the high-energy transportation system to be derived from it. It is shown that, in addition to its cost effectiveness in earth-orbital missions, the Shuttle promises to be of major significance for future solar-system exploration. Eventually, the Shuttle will make possible the use of large interplanetary payloads launched at high velocities to the far reaches of the solar system.
    Keywords: SPACE VEHICLES
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 63
    facet.materialart.
    Unknown
    The Skylab orbital laboratory. (1972)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The Skylab orbital laboratory is described in terms of spacecraft design features, the experiment programs, and the schedule of planned missions. Attention is given to flight and crew operations, rescue measures, the Multiple Docking Adapter, the Airlock Module, the Workshop, the Apollo Telescope Mount, Saturn V booster, Command and Service Modules, the life support system, thermal and environmental control, electrical power, attitude and pointing control, instrumentation and communications, crew equipment, provisions, and stowage.
    Keywords: SPACE VEHICLES
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 64
    facet.materialart.
    Unknown
    Selective reinforcement of wing structure for flutter prevention. (1972)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The results of an analytical study are presented on the use of boron polyimide filamentary composite material for the purpose of increasing the flutter speed of a simple titanium full depth sandwich wing structure designed for strength. The results clearly demonstrate that selective reinforcement of wing surfaces, using judiciously placed filamentary composites, promises sizable mass savings in the design of advanced aircraft structures.
    Keywords: STRUCTURAL MECHANICS
    Type: Journal of Aircraft; 9; Nov. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 65
    facet.materialart.
    Unknown
    Vibrations of circular elastic plates due to sonic boom. (1972)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The problem of transient axisymmetric vibrations of thin circular elastic plates due to sonic boom excitation is investigated. The equation of motion for a solid circular plate is solved by applying the modified finite Hankel transform and the Laplace transform, and the numerical results are obtained with the help of the digital computer. From the analysis of the data, obtained for the dynamic deflections of the plates for the boom duration, it is concluded that for a normal flight the boom duration has a significant effect on the vibrations of plates as compared to the overpressure of the boom.
    Keywords: STRUCTURAL MECHANICS
    Type: Acoustical Society of America; vol. 52
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 66
    facet.materialart.
    Unknown
    Satellite Aerodynamics and Density Determination from Satellite Dynamic Response (1972)
    In:  CASI
    Details
    Publication Date: 2014-09-09
    Description: The aerodynamic drag and lift properties of a satellite are first expressed as a function of two parameters associated with gas-surface interaction at the satellite surface. The dynamic response of the satellite as it passes through the atmosphere is then expressed as a function of the two gas-surface interaction parameters, the atmospheric density, the satellite velocity, and the satellite orientation to the high speed flow. By proper correlation of the observed dynamic response with the changing angle of attack of the satellite, it is found that the two unknown gas-surface interaction parameters can be determined. Once the gas-surface interaction parameters are known, the aerodynamic properties of the satellite at all angles of attack are also determined.
    Keywords: SPACE VEHICLES
    Type: Auburn Univ. The NASA-ASEE Summer Fac. Fellowship Program; p 345-364
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 67
    facet.materialart.
    Unknown
    An Algorithm for Synthesizing Mass and Stiffness Matrices from Experimental Vibration Modes (1972)
    In:  CASI
    Details
    Publication Date: 2016-03-01
    Description: An algorithm is described for synthesizing the mass and stiffness matrices from experimentally derived modal data in a way that preserves the physical significance of the individual mass and stiffness elements. The mass and stiffness matrices are derived for a rollup solar array example, and are then used to define the modal response of a modified array.
    Keywords: STRUCTURAL MECHANICS
    Type: JPL Quart. Tech. Rev. ; Vol. 2; No. 3; p 12-21
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 68
    facet.materialart.
    Unknown
    The Large Space Telescope program. (1972)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The 1980's should see the establishment of the first major observatory in space. This observatory will contain a long-lifetime reflecting telescope of about 120 inches clear aperture. Advantages of an orbiting telescope include the elimination of astronomical seeing effects and improvements in resolving power. The small images and darker sky will permit low-dispersion spectrographs to avoid more of the contaminating background. The crispness of the images also has potential for very efficient high-dispersion spectroscopy. A further advantage lies in the accessibility of all the sky and nearly around-the-clock observing.
    Keywords: SPACE VEHICLES
    Type: Sky and Telescope; 44; Dec. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 69
    facet.materialart.
    Unknown
    Automated techniques for spacecraft monitoring (1972)
    In:  CASI
    Details
    Publication Date: 2012-05-23
    Description: The feasibility of implementing automated spacecraft monitoring depends on four factors: sufficient computer resources, suitable monitoring function definitions, adequate spacecraft data, and effective and economical test systems. The advantages of automated monitoring lie in the decision-making speed of the computer and the continuous monitoring coverage provided by an automated monitoring program. Use of these advantages introduces a new concept of spacecraft monitoring in which system specialists, ground based or onboard, freed from routine and tedious monitoring, could devote their expertise to unprogrammed or contingency situations.
    Keywords: SPACE VEHICLES
    Type: AGARD Automation in Manned Aerospace Systems; 12 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 70
    facet.materialart.
    Unknown
    Mechanism problems (1972)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: It is pointed out that too frequently during the design and development of mechanisms, problems occur that could have been avoided if the right question had been asked before, rather than after, the fact. Several typical problems, drawn from actual experience, are discussed and analyzed. The lessons learned are used to generate various suggestions for minimizing mistakes in mechanism design.
    Keywords: SPACE VEHICLES
    Type: NASA. Lyndon B. Johnson Space Center The 7th Aerospace Mech. Symp.; p 3-13
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 71
    facet.materialart.
    Unknown
    Apollo Lunar Module Landing Gear (1972)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: The Apollo lunar module landing-gear flight-performance results and three principal gear development problems are discussed. In evaluating the lunar module touchdown performance, strut stroking and toppling stability are the prime factors and are governed primarily by touchdown velocity and surface slope at the touchdown point. Flight results are shown to be well within design values, and the landing-gear has performed successfully in all landings.
    Keywords: SPACE VEHICLES
    Type: The 7th Aerospace Mech. Symp.; p 123-133
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 72
    facet.materialart.
    Unknown
    Dynamic analysis of Apollo-Salyut/Soyuz docking (1972)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: The use of a docking-system computer program in analyzing the dynamic environment produced by two impacting spacecraft and the attitude control systems is discussed. Performance studies were conducted to determine the mechanism load and capture sensitivity to parametric changes in the initial impact conditions. As indicated by the studies, capture latching is most sensitive to vehicle angular-alinement errors and is least sensitive to lateral-miss error. As proved by load-sensitivity studies, peak loads acting on the Apollo spacecraft are considerably lower than the Apollo design-limit loads.
    Keywords: SPACE VEHICLES
    Type: The 7th Aerospace Mech. Symp.; p 47-57
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 73
    facet.materialart.
    Unknown
    The Apollo 15 deployable boom anomaly (1972)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: During the Apollo 15 mission, a boom with an attached mass spectrometer was required to retract periodically so that the instrument would not be in the field of view of other experiments. The boom did not fully retract on five of 12 occasions. Data analysis indicated that the boom probably retracted to within approximately 2.54 centimeters (1 inch) of full retraction. The pertinent boom-design details, the events in the mission related to the anomaly, a discussion of the inflight and postflight investigation of the problem, a discussion of the design changes to the boom mechanism as a result of the investigation, and subsequent flight performance are presented.
    Keywords: SPACE VEHICLES
    Type: the 7th Aerospace Mech. Symp.; p 15-26
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 74
    facet.materialart.
    Unknown
    Skylab (1972)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: The Skylab program is presented to show the construction of the space vehicle and the facilities provided. The projects to be conducted during Skylab missions are described. The cost of the program is discussed and plans for future Skylab vehicles and missions are analyzed. Photographs of the interior of Skylab simulators are included to clarify the report.
    Keywords: SPACE VEHICLES
    Type: NASA. Marshall Space Flight Center Space for Mankind's Benefit; p 41-56
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 75
    facet.materialart.
    Unknown
    Unmanned spacecraft for research (1972)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: The applications of unmanned spacecraft for research purposes are discussed. Specific applications of the Communication and Navigation satellites and the Earth Observations satellites are described. Diagrams of communications on world-wide basis using synchronous satellites are developed. Photographs of earth resources and geology obtained from space vehicles are included.
    Keywords: SPACE VEHICLES
    Type: NASA. Marshall Space Flight Center Space for Mankind's Benefit; p 23-39
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 76
    facet.materialart.
    Unknown
    The potential impact of the space shuttle on space benefits to mankind (1972)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: The potential impact of the space shuttle on space benefits to mankind is discussed. The space shuttle mission profile is presented and the capabilities of the spacecraft to perform various maneuvers and operations are described. The cost effectiveness of the space shuttle operation is analyzed. The effects upon technological superiority and national economics are examined. Line drawings and artist concepts of space shuttle configurations are included to clarify the discussion.
    Keywords: SPACE VEHICLES
    Type: NASA. Marshall Space Flight Center Space for Mankind's Benefit; p 57-76
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 77
    facet.materialart.
    Unknown
    Applications of NASTRAN substructuring (1972)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: The application of substructuring techniques are described for two example problems, a square plate and the static analysis of a frame-wall interaction problem in multistory structures. A DMAP routine for calculating the multipoint constraint forces is presented.
    Keywords: STRUCTURAL MECHANICS
    Type: NASTRAN: Users' Experiences e; p 485-496
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 78
    facet.materialart.
    Unknown
    Structural dynamic and thermal stress analysis of nuclear reactor vessel support system (1972)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: A nuclear reactor vessel is supported by a Z-ring and a box ring girder. The two proposed structural configurations to transmit the loads from the Z-ring and the box ring girder to the foundation are shown. The cantilever concrete ledge transmitting the load from the Z-ring and the box girder via the cavity wall to the foundation is shown, along with the loads being transmitted through one of the six steel columns. Both of these two supporting systems were analyzed by using rigid format 9 of NASTRAN for dynamic loads, and the thermal stresses were analyzed by AXISOL. The six column configuration was modeled by a combination of plate and bar elements, and the concrete cantilever ledge configuration was modeled by plate elements. Both configurations were found structurally satisfactory; however, nonstructural considerations favored the concrete cantilever ledge.
    Keywords: STRUCTURAL MECHANICS
    Type: NASA. Langley Res. Center NASTRAN: Users' Experience; p 465-475
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 79
    facet.materialart.
    Unknown
    Structural analysis for a 40-story building (1972)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: NASTRAN was chosen as the principal analytical tool for structural analysis of the Illinois Center Plaza Hotel Building in Chicago, Illinois. The building is a 40-story, reinforced concrete structure utilizing a monolithic slab-column system. The displacements, member stresses, and foundation loads due to wind load, live load, and dead load were obtained through a series of NASTRAN runs. These analyses and the input technique are described.
    Keywords: STRUCTURAL MECHANICS
    Type: NASA. Langley Res. Center NASTRAN: Users' Experiences; p 421-427
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 80
    facet.materialart.
    Unknown
    Applications of NASTRAN to nuclear problems (1972)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: The extent to which suitable solutions may be obtained for one physics problem and two engineering type problems is traced. NASTRAN appears to be a practical tool to solve one-group steady-state neutron diffusion equations. Transient diffusion analysis may be performed after new levels that allow time-dependent temperature calculations are developed. NASTRAN piecewise linear anlaysis may be applied to solve those plasticity problems for which a smooth stress-strain curve can be used to describe the nonlinear material behavior. The accuracy decreases when sharp transitions in the stress-strain relations are involved. Improved NASTRAN usefulness will be obtained when nonlinear material capabilities are extended to axisymmetric elements and to include provisions for time-dependent material properties and creep analysis. Rigid formats 3 and 5 proved to be very convenient for the buckling and normal-mode analysis of a nuclear fuel element.
    Keywords: STRUCTURAL MECHANICS
    Type: NASTRAN: Users' Experiences; p 429-441
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 81
    facet.materialart.
    Unknown
    A design study for the addition of higher order parametric discrete elements to NASTRAN (1972)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: The addition of discrete elements to NASTRAN poses significant interface problems with the level 15.1 assembly modules and geometry modules. Potential problems in designing new modules for higher-order parametric discrete elements are reviewed in both areas. An assembly procedure is suggested that separates grid point degrees of freedom on the basis of admissibility. New geometric input data are described that facilitate the definition of surfaces in parametric space.
    Keywords: STRUCTURAL MECHANICS
    Type: NASA. Langley Res. Center NASTRAN: Users' Experiences; p 361-373
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 82
    facet.materialart.
    Unknown
    Some aspects of the NASTRAN program output (1972)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: The NASTRAN program output is discussed from a structural analysts point of view, and the simple modifications which were made to the program in order to improve it are also described. The convenience of the output for use in original design work is critically appraised and compared with the output from ASTRAL. It is shown that considerable hand calculation is necessary in order to extract useful load distribution data from the available NASTRAN output. For this reason, some effort was directed toward providing additional force output for the NASTRAN shear panel element.
    Keywords: STRUCTURAL MECHANICS
    Type: NASA. Langley Res. Center NASTRAN: Users' Experiences; p 337-360
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 83
    facet.materialart.
    Unknown
    An isoparametric quadrilateral membrane element for NASTRAN (1972)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: The geometric and kinematic properties of the element are described, along with development of the matrices and vectors which characterize the element. The necessity for considering small deviations from element planeness is discussed, and the approach taken to account for these deviations is described. The improved accuracy over the existing quadrilateral membrane is indicated by a sample calculation for which an analytical solution is available from beam theory. For the same finite element idealization, the errors in maximum displacement and stress were significantly reduced.
    Keywords: STRUCTURAL MECHANICS
    Type: NASTRAN: Users' Experiences e; p 315-336
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 84
    facet.materialart.
    Unknown
    Adaptation of NASTRAN to an integrated system of structural design analysis (1972)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: Efforts to integrate NASTRAN into a complete structural analysis system for use by large airframe design projects are discussed. NASTRAN was implemented as a major finite element structural analysis program to determine the static and dynamic behavior of complete airframes, as well as structural components. This requires modifications and additions to NASTRAN, to communicate with an existing system, and to provide facilities needed to work within the integrated structural analysis. For this purpose, several special DMAP modules were developed and introduced into the CALAC version of the NASTRAN system.
    Keywords: STRUCTURAL MECHANICS
    Type: NASA. Langley Res. Center NASTRAN: Users' Experiences; p 289-302
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 85
    facet.materialart.
    Unknown
    Comparison of NASTRAN and STARDYNE static analysis of a graphite fiber reinforced plastic truss structure (1972)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: A static and buckling analysis of the ATS-F&G spacecraft reflector support truss (RST) and bridge truss assembly using NASTRAN was conducted. The RST is fabricated from a new material, graphite fiber reinforced plastic. A comparison is made with the NASTRAN results and the results of a similar analysis conducted using the stardyne program. The results of an actual static load test are also compared.
    Keywords: STRUCTURAL MECHANICS
    Type: NASTRAN: Users' Experiences e; p 303-314
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 86
    facet.materialart.
    Unknown
    A comparison of the capabilities of three finite element programs (1972)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: Three finite element programs are compared to assess their capabilities as an analysis tool in a structural design process. Because of the need for repetitive analyses as an integral part of a design loop, a candidate program must be capable of handling large problems, operate efficiently, and be readily adaptable for use in computer-aided design. The three programs considered in the study, ELAS,SNAP, and NASTRAN, range from a relatively small finite element program limited to static structural analysis (ELAS) to a large complex general analysis system (NASTRAN). Results are given for comparative speeds and computer resources required for each program in the analysis of sample fuselage problems representative of practical aircraft design.
    Keywords: STRUCTURAL MECHANICS
    Type: NASA. Langley Res. Center NASTRAN: Users' Experiences; p 277-287
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 87
    facet.materialart.
    Unknown
    Nonapplicability of linear finite element programs to the stress analysis of tires (1972)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: A static finite element stress analysis of an inflated radial car tire was carried out. The deformed shape of the sidewall presents outward bulging. The analysis of a homogeneous isotropic toroidal shell shows that the problem is common to all solids of this type. The study suggests that the geometric stiffness due to the inflation pressure has to be taken into account. Also, the resulting large displacements make it necessary for the geometry to be updated at each load step.
    Keywords: STRUCTURAL MECHANICS
    Type: NASA. Langley Res. Center NASTRAN: Users' Experiences; p 263-276
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 88
    facet.materialart.
    Unknown
    Modeling techniques of thin walled beams with open cross sections (1972)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: A composite element is presented which includes the effects of warping and offset shear centers. It is shown to be mathematically consistent with thin walled open beam theory and can be incorporated into any structural analysis program by use of NASTRAN'S standard elements. A numerical example analyzing the vibration of a channel beam is presented, and, by using the composite element, the numerical results agreed well with theoretical data.
    Keywords: STRUCTURAL MECHANICS
    Type: NASA. Langley Res. Center NASTRAN: Users' Experiences; p 179-195
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 89
    facet.materialart.
    Unknown
    Complex eigenvalue analysis of rotating structures (1972)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: A FORTRAN subroutine to NASTRAN which constructs coriolis and centripetal acceleration matrices, and a centrifugal load vector due to spin about a selected point or about the mass center of the structure is discussed. The rigid translational degrees of freedom can be removed by using a transformation matrix T and its explicitly given inverse. These matrices are generated in the subroutine and their explicit expressions are given.
    Keywords: STRUCTURAL MECHANICS
    Type: NASTRAN: Users' Experiences; p 197-234
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 90
    facet.materialart.
    Unknown
    Level 12 NASTRAN experiences at General Dynamics, Convair Aerospace Division, Fort Worth Operations (1972)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: The level 12 NASTRAN was used to support the NASA/LaRC advanced transport technology study, a predesign, short response time effort. Aeroelastic analyses were performed. NASTRAN calculated the vibration modes for the supported airfoil components and the entire unsupported vehicle. Other procedures were then used for the aeroelastic analysis, with procedure interfacing accomplished through use of the NASTRAN-produced restart tape. Stiffness matrices were used in static aeroelastic analyses; natural vibration modes were used for flutter and flight control system definition. Various level 12 NASTRAN characteristics were discovered and are discussed; e.g., the ability to solve singular matrices in rigid format 1, run times using multipoint constraints, restart tape problems, and the inaccurate stresses from the quad membrane when used with anisotropic materials.
    Keywords: STRUCTURAL MECHANICS
    Type: NASA. Langley Res. Center NASTRAN: Users' Experiences; p 235-261
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 91
    facet.materialart.
    Unknown
    Transient analysis of an IVHM grapple impact test (1972)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: A lumped mass model was used to represent the impact condition between a fuel duct and an IVHM in-vessel fuel handling machine. The nonlinear effects of a Bellville spring and the free fall impact of the fuel duct on the IVHM were included. The purpose of the tests was to determine the loads on the fuel duct due to the impact. A comparison between experimental and theoretical results is presented.
    Keywords: STRUCTURAL MECHANICS
    Type: NASA. Langley Res. Center NASTRAN: Users' Experiences; p 161-178
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 92
    facet.materialart.
    Unknown
    A NASTRAN correlation study for vibrations of a cross-stiffened ship's deck (1972)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: To evaluate the effectiveness of NASTRAN for predicting the vibration modes of panels with bending-membrane coupling, a cross-stiffened ship deck was analyzed. In correlation with experimental data, one NASTRAN finite element representation gave results slightly more accurate than a previous analytical solution. Computational time was excessively long, due to the Guyan method of reducing the eigenvalue problem. It is recommended that a more efficient method of matrix reduction be implemented for the lumped mass formulation.
    Keywords: STRUCTURAL MECHANICS
    Type: NASA. Langley Res. Center NASTRAN: Users' Experiences; p 145-159
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 93
    facet.materialart.
    Unknown
    Delta launch vehicle isogrid structure NASTRAN analysis (1972)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: Structural analysis applications of NASTRAN to the isogrid structure of the Delta launch vehicle are discussed. Isogrid is a method employed to stiffen the booster cylindrical shell surface by integrally machining ribs and skin from one piece of metal. The ribs are arranged in a repetitive equilateral triangular pattern; this results in a structural surface whose stiffness is orthogonally isotopic. For that structure, both static and general instability buckling analyses are described and the theoretical results are compared to test data. One of the parameters included in the analysis is the effect of pressure loadings on the buckling allowable load. In addition, a description of a supplementary computer program is presented.
    Keywords: STRUCTURAL MECHANICS
    Type: NASTRAN: Users' Experiences; p 121-143
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 94
    facet.materialart.
    Unknown
    Experiences in interfacing NASTRAN with another finite element program (1972)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: The coupling of NASTRAN to another finite element program developed for the static analysis of automotive structures is discussed. The two programs were coupled together to use the substructuring capability of the in-house program and the normal mode analysis capability of NASTRAN. Modifications were made to the NASTRAN program in order to make the coupling feasible.
    Keywords: STRUCTURAL MECHANICS
    Type: NASA. Langley Res. Center NASTRAN: Users' Experiences; p 111-119
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 95
    facet.materialart.
    Unknown
    Analysis and design of on-grade reinforced concrete track support structures (1972)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: For the improvement of rail service, the Department of Transportation, Federal Rail Administration, is sponsoring a test track on the Atchison, Topeka, and Santa Fe Railway. The test track will contain nine separate rail support structures, including one conventional section for control and three reinforced concrete structures on grade, one slab and two beam sections. The analysis and design of these latter structures was accomplished by means of the finite element method, NASTRAN, and is presented.
    Keywords: STRUCTURAL MECHANICS
    Type: NASA. Langley Res. Center NASTRAN: Users' Experiences; p 99-110
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 96
    facet.materialart.
    Unknown
    Stress and buckling analysis of a double-bubble tank structure (1972)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: An analytical study of a two-lobed circular arc pressure vessel (double-bubble tank) with a local perturbation from the cylindrical shape was made. It can be concluded that NASTRAN provides a good linear buckling analysis capability for structures that cannot be handled by other analysis techniques. However, solutions are relatively expensive from a computational standpoint. Two worthwhile additions to the NASTRAN program would be the inclusion of a new beam element that adequately represents the shear transfer when modeling stiffeners on a shell and the capability, in a rigid format, to keep certain prescribed loads constant during the eigenvalue extraction process.
    Keywords: STRUCTURAL MECHANICS
    Type: NASTRAN: Users' Experiences; p 53-71
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 97
    facet.materialart.
    Unknown
    NASTRAN buckling analysis of a thin walled cylinder (1972)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: The computer run time required for a buckling analysis using NASTRAN is considerably greater than for a linear static analysis of the same structure. It is very important to obtain an optimal model size for the structure being analyzed, such that the model is neither so large as to increase running time unnecessarily, nor so small as to hinder accuracy. The problem of critical load accuracy versus model complexity is considered for a thin walled cylinder, using both Level 12 and Level 15 NASTRAN releases.
    Keywords: STRUCTURAL MECHANICS
    Type: NASTRAN: Users' Experiences; p 39-51
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 98
    facet.materialart.
    Unknown
    Buckling analysis of a missile interstage (1972)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: The NASTRAN program was used to find the buckling location and the degradation factor due to a specified temperature field for an interstage of a typical three stage missile. The model was made up of 6332 independent degrees of freedom. This large size required the use of an IBM 370/195 for evaluation of the eigenvalues. The effect of elevated temperature was to lower the critical buckling load by 3%.
    Keywords: STRUCTURAL MECHANICS
    Type: NASA. Langley Res. Center NASTRAN: Users' Experiences; p 29-38
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 99
    facet.materialart.
    Unknown
    Some applications of NASTRAN to the buckling of thin cylindrical shells with cutouts (1972)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: The buckling of isotropic and waffle-stiffened circular cylinders with and without cutouts was studied using NASTRAN's Rigid Format 5 for the case of axial compressive loading. The results obtained for the cylinders without cutouts are compared with available reference solutions. The results for the isotropic cylinders containing a single circular cutout with selected radii are compared with available experimental data. For the waffle-stiffened cyclinder, the effect of two diametrically opposed rectangular cutouts was studied. A DMAP alter sequence was used to permit the necessary application of different prebuckling and buckling boundary conditions. Advantage was taken of available symmetry planes to formulate equivalent NASTRAN model segments which reduced the associated computational cost of performing the analyses. Limitations of the applicability of NASTRAN for the solution of problems with nonlinear characteristics are discussed.
    Keywords: STRUCTURAL MECHANICS
    Type: NASTRAN: Users' Experiences; p 73-97
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 100
    facet.materialart.
    Unknown
    NASTRAN: A progress report (1972)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: Significant NASTRAN-related events since September, 1971 are reviewed. The present operation of the NASTRAN systems management office is described, as well as new capabilities and improvements incorporated in Level 15 of NASTRAN, and priorities for future levels of NASTRAN.
    Keywords: STRUCTURAL MECHANICS
    Type: NASTRAN: Users' Experiences; p 1-11
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
Close ⊗
This website uses cookies and the analysis tool Matomo. More information can be found here...