ALBERT

All Library Books, journals and Electronic Records Telegrafenberg

X
feed icon rss

Your email was sent successfully. Check your inbox.

An error occurred while sending the email. Please try again.

Proceed reservation?

Export
Filter
  • PROPULSION SYSTEMS  (349)
  • AERODYNAMICS
  • 1980-1984
  • 1970-1974  (601)
  • 1972  (601)
Collection
Keywords
Years
  • 1980-1984
  • 1970-1974  (601)
Year
  • 1
    facet.materialart.
    Unknown
    Pulse performance analysis for small hypergolic propellant rocket engines (1972)
    In:  CASI
    Details
    Publication Date: 2005-11-30
    Description: Small rocket engine tests were conducted for the purpose of obtaining pulse performance data to aid in preliminary design and evaluation of attitude control systems. Both monopropellant and hypergolic bipropellant engines of thrust levels from 5 to 445 N (1 to 100 lb) were tested. The performance data for the hypergolic propellant rockets are compared with theoretical performance calculated from idealized chamber filling and evacuation characteristics. Electromechanical delays in valve response and heat transfer characteristics were found to cause substantial deviation between theoretical performance and test performance. The theoretical analysis is modified to obtain a semiempirical model for hypergolic propellant rockets.
    Keywords: PROPULSION SYSTEMS
    Type: Res. Achievements Rev., Vol. 4, No. 6; p 61-74
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 2
    facet.materialart.
    Unknown
    Extendible rocket nozzle development (1972)
    In:  CASI
    Details
    Publication Date: 2005-11-30
    Description: An evaluation is presented of J-2 engine modifications that will simplify operation and improve reliability of the advanced Saturn 1C launch vehicle. Methods of increasing thrust without extensively modifying the S-2 or S-4B stages are also evaluated. A thrust increase was achieved by raising engine combustion through a redesign of the engine thrust chamber and propellant feed system.
    Keywords: PROPULSION SYSTEMS
    Type: Res. Achievements Rev., Vol. 4, No. 6; p 105-115
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 3
    facet.materialart.
    Unknown
    Velocity diagrams (1972)
    In:  CASI
    Details
    Publication Date: 2005-11-30
    Description: The selection and design of velocity diagrams for axial flow turbines are considered. Application is treated in two parts which includes: (1) mean-section diagrams, and (2) radial variation of diagrams. In the first part, the velocity diagrams occurring at the mean section are assumed to represent the average conditions encountered by the turbine. The different types of diagrams, their relation to stage efficiency, and their selection when staging is required are discussed. In the second part, it is shown that in certain cases the mean-section diagrams may or may not represent the average flow conditions for the entire blade span. In the case of relatively low hub- to tip-radius ratios, substantial variations in the velocity diagrams are encountered. The radial variations in flow conditions and their effect on the velocity diagrams are considered.
    Keywords: PROPULSION SYSTEMS
    Type: Turbine Design and Appl., Vol. 1; p 69-99
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 4
    facet.materialart.
    Unknown
    In-flight aeroacoustic environments on prospective space shuttle vehicles (1972)
    In:  CASI
    Details
    Publication Date: 2005-11-30
    Description: The problem of in-flight aerodynamic noise has been studied by reliable estimates of full scale surface-pressure fluctuations from scale model tests in wind tunnels. Scaling relationships have been verified, and many details of the fluctuating pressure characteristics such as spatial correlation and convection velocities are understood. The effects of the wind tunnel environmental turbulence and noise have also been investigated sufficiently so that threshold levels of usable data are known.
    Keywords: AERODYNAMICS
    Type: NASA Space Shuttle Technol. Conf.; p 71-96
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 5
    facet.materialart.
    Unknown
    Basic turbine concepts (1972)
    In:  CASI
    Details
    Publication Date: 2005-11-30
    Description: Turbine geometric, flow, energy transfer, efficiency, and performance characteristics are considered by the use of definitions, diagrams, and dimensionless parameters. Emphasis is placed on the determination of the fluid velocity as it passes from one blade row to the next. The general methods for constructing velocity diagrams and relating them to the work and flow capacity of the turbine are discussed.
    Keywords: PROPULSION SYSTEMS
    Type: Turbine Design and Appl., Vol. 1; p 21-67
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 6
    facet.materialart.
    Unknown
    Summary and future plans (1972)
    In:  CASI
    Details
    Publication Date: 2004-12-03
    Keywords: AERODYNAMICS
    Type: Supercritical Wing Technol.: A Report on Flight Evaluation; p 121-133
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 7
    facet.materialart.
    Unknown
    Piloting and operational aspets of the F-8 supercritical wing airplane (1972)
    In:  CASI
    Details
    Publication Date: 2004-12-03
    Keywords: AERODYNAMICS
    Type: Supercritical Wing Technol.: A Report on Flight Evaluation; p 97-110
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 8
    facet.materialart.
    Unknown
    Status of the F-8 supercritical wing program (1972)
    In:  CASI
    Details
    Publication Date: 2004-12-03
    Keywords: AERODYNAMICS
    Type: Supercritical Wing Technol.: A Report on Flight Evaluation; p 49-58
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 9
    facet.materialart.
    Unknown
    F-8 supercritical wing pressure distribution evaluation (1972)
    In:  CASI
    Details
    Publication Date: 2004-12-03
    Keywords: AERODYNAMICS
    Type: Supercritical Wing Technol.: A Report on Flight Evaluation; p 71-84
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 10
    facet.materialart.
    Unknown
    Buffet characteristics of the F-8 supercritical wing airplane (1972)
    In:  CASI
    Details
    Publication Date: 2004-12-03
    Keywords: AERODYNAMICS
    Type: Supercritical Wing Technol.: A Report on Flight Evaluation; p 85-96
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 11
    facet.materialart.
    Unknown
    The NASA supercritical airfoil and its application to swept wings (1972)
    In:  CASI
    Details
    Publication Date: 2004-12-03
    Keywords: AERODYNAMICS
    Type: Supercritical Wing Technol.: A Report on Flight Evaluation; p 1-12
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 12
    facet.materialart.
    Unknown
    Evolution of the F-8 supercritical wing configuration (1972)
    In:  CASI
    Details
    Publication Date: 2004-12-03
    Keywords: AERODYNAMICS
    Type: Supercritical Wing Technol.: A Report on Flight Evaluation; p 35-48
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 13
    facet.materialart.
    Unknown
    Minimum impulse tests of 0.45-N liquid hydrazine catalytic thrusters (1972)
    In:  CASI
    Details
    Publication Date: 2006-02-22
    Description: An exploratory test series was conducted on three types of 0.45-N (0.1 lbf) liquid hydrazine thrusters to ascertain the minimum impulse bit capability for this class of engine. The test series is described and the results are presented. The testing was performed at 21 and 145 C (70 and 300 F) while maintaining nominal 0.45 N (0.1 lbf) upstream conditions. Valve on-times as low as 0.008 sec were applied. Impulse bits were observed for thruster temperatures of 21 and 145 C (70 and 300 F), respectively.
    Keywords: PROPULSION SYSTEMS
    Type: JPL Quarterly Tech. Rev., Vol. 2, No. 1; p 107-112
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 14
    facet.materialart.
    Unknown
    Mariner 9 propulsion subsystem performance during interplanetary cruise and Mars orbit insertion (1972)
    In:  CASI
    Details
    Publication Date: 2006-02-22
    Description: On 14 November 1971 the Mariner 9 1334-N-(300-lbf)-thrust rocket engine was fired for just over 15 min to place the first man-made satellite into orbit about Mars. Propulsion subsystem data gathered during the 5-month interplanetary cruise and orbit insertion are of significance to future missions of this type. Specific results related to performance predictability, zero g heat transfer, and nitrogen permeation, diffusion, and solubility values are presented.
    Keywords: PROPULSION SYSTEMS
    Type: JPL Quarterly Tech. Rev., Vol. 2, No. 1; p 113-122
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 15
    facet.materialart.
    Unknown
    Solar-electric propulsion breadboard thrust subsystem (1972)
    In:  CASI
    Details
    Publication Date: 2006-02-22
    Description: A solar-electric propulsion breadboard thrust subsystem has been designed, built, and tested. A 1500-h test was performed to demonstrate the functional capabilities of the subsystem. Described are the subsystem functions and testing process. The results show that the ground work has been established for development of an engineering model of the thrust subsystem.
    Keywords: PROPULSION SYSTEMS
    Type: JPL Quart. Tech. Rev., Vol. 2, No. 2; p 100-112
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 16
    facet.materialart.
    Unknown
    EBF noise tests with engine under-the-wing and over-the-wing configurations (1972)
    In:  CASI
    Details
    Publication Date: 2006-03-27
    Description: Noise tests of externally blown flaps with the engine under the wing and engine over the wing configurations were conducted. Flap noise data obtained on a TF-34 aircraft are discussed. Noise data obtained during a free-jet forward-speed-effect analysis are presented. Noise sources associated with upper surface flap blowing are described. Results of a small scale configuration screening study and some large scale model test data are analyzed. The noise data for the engine over wing configurations are compared with the engine under the wing configurations.
    Keywords: AERODYNAMICS
    Type: STOL Technol.; p 455-473
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 17
    facet.materialart.
    Unknown
    STOL propulsion systems (1972)
    In:  CASI
    Details
    Publication Date: 2006-03-27
    Description: The selection and the characteristics of quiet, clean propulsion systems for STOL aircraft are discussed. Engines are evaluated for augmentor wing and externally blown flap STOL aircraft with the engines located both under and over the wings. Some supporting test data are presented. Optimum engines are selected based on achieving the performance, economic, acoustic, and pollution goals presently being considered for future STOL aircraft. The data and results presented were obtained from a number of contracted studies and some supporting NASA inhouse programs, most of which began in early 1972. The contracts include: (1) two aircraft and mission studies, (2) two propulsion system studies, (3) the experimental and analytic work on the augmentor wing, and (4) the experimental programs on Q-Fan. Engines are selected and discussed based on aircraft economics using the direct operating cost as the primary criterion. This cost includes the cost of the crew, fuel, aircraft, and engine maintenance and depreciation.
    Keywords: PROPULSION SYSTEMS
    Type: STOL Technol.; p 475-509
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 18
    facet.materialart.
    Unknown
    Flap noise generation and control (1972)
    In:  CASI
    Details
    Publication Date: 2006-03-27
    Description: The characteristics of aerodynamic noise generated by the interaction of an airstream with a flap surface are discussed. The location and behavior of various noise sources were investigated to determine optimal quieting techniques. A schematic diagram of the jet-flap concepts being considered for integrated-powered-lift systems for short takeoff aircraft is shown. Each of the concepts has in common high velocity turbulent air flowing over relatively rigid surfaces with resultant production of interaction noise. The nature, location, and control of noise sources which involve the interactions of air flows with airfoil surfaces are examined.
    Keywords: AERODYNAMICS
    Type: STOL Technol.; p 413-426
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 19
    facet.materialart.
    Unknown
    Engine noise technology (1972)
    In:  CASI
    Details
    Publication Date: 2006-03-27
    Description: The characteristics of aircraft engine noise are discussed. Data are provided to show the noise produced by the following aircraft components: (1) fan noise, (2) noise suppressing structures, (3) sonic inlets, (4) jet mixing noise due to nozzle flow, and (5) thrust reversers. Charts are developed to show the sound pressure level and the frequencies for each type of noise source. The use of laminates and composite materials to dissipate acoustic power is examined.
    Keywords: PROPULSION SYSTEMS
    Type: STOL Technol.; p 371-412
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 20
    facet.materialart.
    Unknown
    Acoustic characteristics of large-scale STOL models at forward speed (1972)
    In:  CASI
    Details
    Publication Date: 2006-03-27
    Description: Wind-tunnel investigations of the acoustic characteristics of the externally blown jet flap (EBF) and augmentor wing STOL concepts are discussed. The large-scale EBF model was equipped with a triple-slotted flap blown by four JT15D turbofan engines with circular, coannular exhaust nozzles. The large-scale augmentor wing model was equipped with an unlined augmentor blown by a slot primary nozzle. The effects of airspeed and angle of attack on the acoustics of the EBF were small. Flap deflection had a greater effect on the acoustics of the augmentor wing than did airspeed. The total sound power was also significantly higher for landing indicating that turning in the augmentor generated acoustic energy. Airspeed produced a small aft shift in acoustic directivity with no significant change in the peak perceived noise levels or sound power levels. Small-scale research of the acoustics for the augmentor wing has shown that by blowing an acoustically treated augmentor with a lobed primary nozzle, the 95-PNdb noise level goal can be achieved or surpassed.
    Keywords: AERODYNAMICS
    Type: STOL Technol.; p 443-454
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 21
    facet.materialart.
    Unknown
    Externally blown flap impingement noise (1972)
    In:  CASI
    Details
    Publication Date: 2006-03-27
    Description: Tests of the noise produced by the impingement of the jet exhaust on the wing and flap for an externally blown flap system were conducted with a CF700 turbofan engine and an F-111B wing panel. The noise produced with a daisy nozzle installed on the engine was greater than that produced by a conical nozzle at the same thrust. The presence of the wing next to the test nozzles increased the noise, as did increasing the flap deflection angle. Compared with the conical nozzle, the daisy nozzle produced slightly less noise at a flap deflection of 60 deg but produced more noise at the lower flap deflections tested. Tests showed that the single-slotted flap deflected 60 deg, produced less noise than the double-slotted flaps. Also, maintaining the maximum distance between the exit nozzle and flap system resulted in a minor reduction in noise.
    Keywords: AERODYNAMICS
    Type: STOL Technol.; p 427-441
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 22
    facet.materialart.
    Unknown
    Quiet STOL propulsion session introductory remarks (1972)
    In:  CASI
    Details
    Publication Date: 2006-03-27
    Description: Research activities, preliminary design activities, and system optimization studies in support of the development of advanced, quiet, STOL propulsion systems are discussed. Noise alleviation by means of controlling the source and by means of acoustical treatment receive considerable emphasis. A STOL airplane designed for a given payload has essentially double the installed thrust of a comparable CTOL airplane. Unless compensated for during the design process, this alone will tend to increase the source noise by 3 db. The propulsive lift introduces flap impingement noise or duct and flap scrubbing noise, noise sources not present in CTOL airplanes to any significant degree. These additional noise sources are illustrated. Depending on the specific configuration, this will tend to increase the noise by several db or more. Although the propulsive lift characteristics of STOL airplanes will tend to increase source noise significantly, the proximity of STOL airfields to populated areas leads to STOL noise objectives considerably lower than those currently applicable to CTOL airplanes.
    Keywords: PROPULSION SYSTEMS
    Type: STOL Technol.; p 367-370
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 23
    facet.materialart.
    Unknown
    Survey of wing and flap lower-surface temperatures and pressures during full-scale ground tests of an externally blown flap system (1972)
    In:  CASI
    Details
    Publication Date: 2006-03-27
    Description: Full-scale ground tests of an externally blown flap system were made using the wing of an F-111B airplane and a CF700 engine. Pressure and temperature distributions were determined on the undersurface of the wing, vane, and flap for two engine exhaust nozzles (conical and daisy) at several engine power and engine/wing positions. The tests were made with no airflow over the wing. The leading-edge wing sweep angle was fixed at 26 deg, the angle of incidence between the engine and the wing was fixed at 3 deg, and the tests were conducted with the flap retracted, extended and deflected 35 deg, and extended and deflected 60 deg. The integrated local pressures on the undersurface of the flap produced loads approximately three times as great at the 60 deg flap position as at the 35 deg flap position. With both nozzle configurations, more than 90 percent of the integrated pressure loads were contained within plus or minus 20 percent of the flap span centered around the engine exhaust centerline. The maximum temperature recorded on the flaps was 218 C (424 F) for the conical nozzle and 180 C (356 F) for the daisy nozzle.
    Keywords: AERODYNAMICS
    Type: STOL Technol.; p 143-156
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 24
    facet.materialart.
    Unknown
    Simulator evaluation of the flying qualities of externally blown flap and augmentor wing transport configurations (1972)
    In:  CASI
    Details
    Publication Date: 2006-03-27
    Description: Concurrent simulations of powered-lift STOL transport aircraft having either an externally blown flap configuration or an augmentor wing configuration were conducted. The following types of simulators of varying sophistication were used: (1) a simple fixed-base simulation with a simple visual display, (2) a more complex fixed-base simulation using a realistic transport cockpit and a high-quality visual display, and (3) a six-degree-of-freedom motion simulator that had a realistic transport cockpit and a sophisticated visual display. The unaugmented flying qualities determined from these simulations were rated as unacceptable for both the externally blown flap and augmentor wing configurations. The longitudinal, lateral-directional, and single-engine-failure characteristics were rated satisfactory with extensive augmentation, including pitch and roll command systems, flight-path (or speed) augmentation, turn coordination, and effective yaw damping. However, the flare and landing characteristics from any approach glide-path angle in excess of 4 deg were rated as unsatisfactory but acceptable.
    Keywords: AERODYNAMICS
    Type: STOL Technol.; p 157-800
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 25
    facet.materialart.
    Unknown
    Aerodynamics of the upper surface blow flap (1972)
    In:  CASI
    Details
    Publication Date: 2006-03-27
    Description: The results of some preliminary wind-tunnel investigations made to provide fundamental aerodynamic information on the upper surface blown jet-flap concept incorporating high-bypass-ratio turbofan engines are summarized. The results of the investigation have shown the concept to have aerodynamic performance generally similar to that of other externally blown high-lift systems. A few of the more critical problems associated with this concept have been identified and preliminary solutions to some of these problems have been found. These results have proven to be sufficiently encouraging to warrant continuation of fundamental research efforts on the concept.
    Keywords: AERODYNAMICS
    Type: NASA. Langley Res. Center STOL Technol.; p 97-110
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 26
    facet.materialart.
    Unknown
    Advanced augmentor-wing research (1972)
    In:  CASI
    Details
    Publication Date: 2006-03-27
    Description: Results of research on advanced augmentors are discussed. Research concerned with performance has indicated that: (1) augmentors with lobe-type nozzles give higher thrust augmentation than those with slot-type primary nozzles, (2) the thrust of augmentor wings at forward speed is greater than that of internally blown flaps for the speed range of interest, and (3) the optimum augmentor geometry at forward speed may be different from the optimum static geometry. Analysis of augmentor-wing data has shown that the data may be correlated by accounting for the augmentation and entrainment in defining a net thrust coefficient.
    Keywords: AERODYNAMICS
    Type: STOL Technol.; p 87-96
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 27
    facet.materialart.
    Unknown
    Aerodynamic characteristics of a swept augmentor wing (1972)
    In:  CASI
    Details
    Publication Date: 2006-03-27
    Description: A brief outline of augmentor wing research sponsored by Ames Research Center is presented and is followed by a discussion of large-scale wind-tunnel test results for a swept augmentor wing configuration. The results showed that the augmentor wing could be applied to high-speed swept wing designs with little adverse effect on either the basic performance of the augmentor or the longitudinal characteristics, including maximum lift and stall. Three lateral control devices were shown to be effective and ground effect was measured for several complete aircraft configurations.
    Keywords: AERODYNAMICS
    Type: STOL Technol.; p 71-86
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 28
    facet.materialart.
    Unknown
    Aerodynamic loads measurements on externally blown flap STOL models (1972)
    In:  CASI
    Details
    Publication Date: 2006-03-27
    Description: Small-scale-model data have shown large static loads on the flap system behind the engines. The large-scale-model tests confirmed the magnitude of these loads and indicated that the relative loading of each flap element depends on the engine-wing-flap geometry. Flap response measurements indicated that the unsteady pressure loading excited the natural vibration modes of the flap system on this model. Since this was a boilerplate model, the only conclusion that can be drawn is that the possibility of large vibration loads must be considered for a flight-weight structure. The similarity of the unsteady pressure and flap response spectra for the wind-off and wind-on cases indicated that it may be possible to realistically test flight-weight flap structures on a static test stand rather than endure the extra costs and scheduling problems associated with large-scale wind-tunnel tests. There is a potential flap-temperature problem which if not resolved might preclude the use of materials such as aluminum and the composites in the flap structure.
    Keywords: AERODYNAMICS
    Type: STOL Technol.; p 121-130
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 29
    facet.materialart.
    Unknown
    Aerodynamic and performance characteristics of externally blown flap configurations (1972)
    In:  CASI
    Details
    Publication Date: 2006-03-27
    Description: The application of externally blown flaps for improving the performance of short takeoff aircraft is discussed. The characteristics of externally blown flap powered lift are examined. A method for predicting the aerodynamic performance of a particular externally blown flap configuration is presented. The following specific effects are analyzed: (1) induced aerodynamics, (2) static turning, (3) flap span and deflection, and (4) engine size and chord flap.
    Keywords: AERODYNAMICS
    Type: STOL Technol.; p 43-54
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 30
    facet.materialart.
    Unknown
    Stability and control of externally blown flap configurations (1972)
    In:  CASI
    Details
    Publication Date: 2006-03-27
    Description: The results of wind-tunnel investigations on the stability and control characteristics of externally blown jet-flap configurations are presented. Conventional wind-tunnel tests and free-flight model tests have shown that longitudinal trim and stability can be achieved by a properly located horizontal tail of sufficient size, and that lateral trim in the engine-out condition can be produced by combinations of differential flap, spoiler, and rudder deflection. Free-flight model tests have revealed a lightly damped Dutch roll lateral oscillation, and have shown that the oscillation can be stabilized by use of artificial damping.
    Keywords: AERODYNAMICS
    Type: STOL Technol.; p 55-70
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 31
    facet.materialart.
    Unknown
    Reduction of wave drag by antisymmetric arrangement of wings and bodies. (1972)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The wave interference effects for bodies or wings in a mirror-symmetric arrangement, and in an antisymmetric arrangement are discussed. It is shown that while in the case of a mirror-symmetric arrangement large adverse interference effects can be observed, antisymmetric arrangements provide comparatively much smaller wave drags. The single continuous wing panels also adapt themselves more readily to varying angles of obliquity, and hence, to varying flight speeds. A detailed review is presented of the previous work on the aerodynamic properties and flight stability of oblique elliptic wing combinations. A possible mode of application of these combinations to transport aircraft operating at moderate supersonic speeds is suggested.
    Keywords: AERODYNAMICS
    Type: AIAA Journal; 10; Feb. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 32
    facet.materialart.
    Unknown
    Impact probe displacement in a supersonic turbulent boundary layer. (1972)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The experiment was performed on the test section sidewall in a supersonic pressure tunnel. The boundary layer at the test station was surveyed in turn by each of 8 impact probes ranging in size from about 1.3 to 48 mm. The impact pressures measured by these probes were combined with the test section static pressure to calculate Mach numbers. Probe displacement effects were evaluated in terms of these Mach number values.
    Keywords: AERODYNAMICS
    Type: AIAA Journal; 10; Apr. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 33
    facet.materialart.
    Unknown
    Effects of transverse outflow from a hypersonic separated region. (1972)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Features of hypersonic, finite-span separated flows with a turbulent boundary layer have been studied to provide a partial assessment of transverse outflow effects on separated flowfield characteristics. Results demonstrate the critical importance of transverse outflow in determining some of the characteristic features of a turbulent, separated boundary layer.
    Keywords: AERODYNAMICS
    Type: AIAA Journal; 10; Apr. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 34
    facet.materialart.
    Unknown
    Turbulent-wake calculations with an eddy-viscosity model. (1972)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: A simple eddy-viscosity model is shown to make it possible to calculate numerically the mean properties of a turbulent wake. Although the structure of the Reynolds stress terms is not resolved, the results obtained are adequate for predicting velocity profiles and displacement thicknesses.
    Keywords: AERODYNAMICS
    Type: AIAA Journal; 10; Feb. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 35
    facet.materialart.
    Unknown
    Preliminary results of large supersonic burning combustor testing. (1972)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: A hydrogen fueled supersonic-burning combustor 18 in. in diameter, which is equivalent to that of an engine about 6 ft in diameter, was tested as a direct-connected duct at inlet conditions which simulated Mach 8 flight at 115,000 ft alt. A synthetic air consisting of oxygen with 39% nitrogen and 38% water vapor at a total temperature of 4500 deg R and a total pressure of 300 psia was supplied to the combustor inlet by a hydrazine-nitrogen tetroxide hot gas generator which maintained a uniform inlet flow Mach number of 2.8. The large combustor size required a new approach to fuel injector design. Some hydrogen was injected through flush-wall injectors, but most was injected from two rows of swept and tapered struts immersed in the flow stream. Supersonic combustion was obtained at hydrogen equivalence ratios of 0.94 without encountering thermal cho king. Wall static pressures, and the radial distribution of hydrogen, Pitot pressure, and Mach number were determined at the combustor exit.
    Keywords: PROPULSION SYSTEMS
    Type: Journal of Aircraft; 9; Jan. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 36
    facet.materialart.
    Unknown
    Shock-wave, turbulent boundary-layer interaction on a blunted compression surface. (1972)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The application of Rose's (1970) analytical method to the study of a shock wave interacting with a turbulent layer on a blunted compression surface is described. Only those details of the method that specifically apply to the case under consideration are discussed.
    Keywords: AERODYNAMICS
    Type: Journal of Spacecraft and Rockets; 9; Apr. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 37
    facet.materialart.
    Unknown
    Measurements of skin friction on the wall of a hypersonic nozzle. (1972)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Direct skin friction measurements obtained on the wall of a Mach 19.8 nozzle are presented. These measurements of skin friction and values deduced from the profile data are compared with predictions from a finite difference theory and also with several 'flat-plate' prediction methods for skin friction.
    Keywords: AERODYNAMICS
    Type: AIAA Journal; 10; Sept
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 38
    facet.materialart.
    Unknown
    Taylor instability in the shock layer on a Jovian atmosphere entry probe. (1972)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Investigation of the Taylor instability relative to the dynamical instability whose presence in the shock layer on a spacecraft entering the Jovian atmosphere is to be expected because of the difference in velocity across the shear layer. Presented calculations show that the Taylor instability at the interface between shock-heated freestream gas and ablation products is inconsequential in comparison to the shear layer instability.
    Keywords: AERODYNAMICS
    Type: Journal of Spacecraft and Rockets; 9; Sept
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 39
    facet.materialart.
    Unknown
    Transition in compressible free shear layers. (1972)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The transition Reynolds number for shear layers produced by interactions between weak and strong shock waves is determined on the basis of experiments performed in a 20-in. (Mach 6) and an 11-in. (Mach 6.9) hypersonic tunnel. A variable angle wedge was used to generate a planar shock wave which interacted with the bow wave of a blunt body. An average value of the transition length (defined as the length along the shear layer from the shock interaction to the point where turbulence became visible on schlieren photographs) was used to determine the transition Reynolds number.
    Keywords: AERODYNAMICS
    Type: Journal of Spacecraft and Rockets; 9; Aug. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 40
    facet.materialart.
    Unknown
    Correlations of peak heating in shock interference regions at hypersonic speeds. (1972)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Correlations are given of measured pressure and heat-transfer peaks for shock/boundary-layer interactions and shear layer attachment on configurations with both two- and three-dimensional interactions. The peak values were obtained from an investigation of shock interference heating on hemispheres, a 30-deg included angle wedge, and a 2.54-cm-diam cylindrical leading-edge fin model. The investigation covers data for Mach numbers of 6 and 20 over freestream Reynolds numbers ranging from (3.3 to 25.6) million per meter, and specific heat ratios of 1.4 and 1.67.
    Keywords: AERODYNAMICS
    Type: Journal of Spacecraft and Rockets; 9; Aug. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 41
    facet.materialart.
    Unknown
    The effect of angle of attack on boundary-layer transition on cones. (1972)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Boundary-layer transition on 5- and 15-deg half-angle cones was studied as a function of angle of attack (ranging from 0 to 20 deg) in a 3.5 ft hypersonic wind tunnel at a freestream Mach number of 7.4. It is shown that the influence of the angle of attack on the transition Reynolds number is a function of the meridian angle. On the windward ray of the 15-deg cone, transition Reynolds numbers show an initial slight increase and then a decrease with increasing angle of attack; leeward-ray Reynolds numbers for this cone decrease rapidly with angle of attack. Windward-ray transition Reynolds numbers increase monotonically with angle of attack on the 5-deg cone, but the effect of the angle of attack on the leeward ray is the same as for the 15-deg cone.
    Keywords: AERODYNAMICS
    Type: AIAA Journal; 10; Aug. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 42
    facet.materialart.
    Unknown
    Computation of transonic flow about finite lifting wings. (1972)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The results of Murman and Krupp (1971) are used to develop a procedure for computing a transonic flow about a finite lifting wing. A small disturbance equation describing the velocity potential of three-dimensional wings is solved in the process. The procedure is applied to a wing with a symmetric biconvex airfoil section in a zero-incidence subsonic flow, to a supersonic rectangular lifting wing with a sharp leading edge and to a subcritical nonlifting rectangular wing with a blunt leading edge.
    Keywords: AERODYNAMICS
    Type: AIAA Journal; 10; July 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 43
    facet.materialart.
    Unknown
    Effect on supersonic jet noise of nozzle plenum pressure fluctuations. (1972)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Demonstration that pressure fluctuations in the plenum chamber to a supersonic nozzle can strongly increase the noise radiated from the jet plume. The correlation shows that jet noise acoustic efficiency increases from 0.3% to 0.8% (or 4 dB) when the chamber roughness intensity increases from essentially no plenum chamber roughness to 2%. A roughness level of 2% has been observed in some turbojet engines. It is concluded that the reduction or elimination of plenum chamber pressure fluctuations may be an important method of reducing the total noise from jet engines.
    Keywords: PROPULSION SYSTEMS
    Type: AIAA Journal; 10; July 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 44
    facet.materialart.
    Unknown
    Subsonic, transonic, and supersonic nozzle flow by the inverse technique. (1972)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The inverse technique is used to obtain a mathematically and physically consistent solution of the flowfield in a nozzle from the mass generation surface through the supersonic region. The inverse method employs an assumed centerline function which is of the Cauchy type in that the values and the derivatives of the function are known. Since the Cauchy boundary conditions can give rise to numerical instabilities, the governing gasdynamic equations for rotational steady flow were transformed into a form which puts the geometry into a rectangular shape, and which spaces the network of interior points more finely in regions of the greatest gradients of the dependent variables. For arbitrarily specified centerline data, the solution of the governing flow equations may not exist, and if it does it may not depend continuously on the data.
    Keywords: AERODYNAMICS
    Type: Journal of Spacecraft and Rockets; 9; June 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 45
    facet.materialart.
    Unknown
    Influence of contraction section shape and inlet flow direction on supersonic nozzle flow and performance. (1972)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Wall static pressure measurements and performance parameters are presented for axisymmetric supersonic nozzles with relatively steep convergent sections and comparatively small radius-of-curvature throats. The nozzle walls were essentially adiabatic. These results are compared with those obtained in other nozzles tested previously to appraise the influence of contraction shape on performance. Both the flow coefficient and the thrust were less than the corresponding values for one-dimensional, isentropic, plane flow for both the axial and radial inflow nozzles considered, but the specific impulse, the most important performance parameter, was found to be relatively unchanged. The thrust decrement for the axial inflow nozzles was established primarily by the shape of the contraction section, and could be estimated reasonably well from a conical sink flow consideration. The radial inflow nozzle has a potential advantage from a cooling point of view if used in a rocket engine.
    Keywords: AERODYNAMICS
    Type: Journal of Spacecraft and Rockets; 9; June 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 46
    facet.materialart.
    Unknown
    Cone transitional boundary-layer structure at Me = 14. (1972)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Experimental results suggest that the boundary-layer mean profiles in hypersonic flows may be highly transitional in the outer part of the boundary layer before the transition process is detected at the surface. Means of determining the initial location where the transition process begins in the outer part of the boundary layer are considered.
    Keywords: AERODYNAMICS
    Type: AIAA Journal; 10; May 1972
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 47
    facet.materialart.
    Unknown
    Aerodynamic properties of spherical balloon wind sensors. (1972)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: A first-order theory of the fluctuating lift and drag coefficients associated with the aerodynamically induced motions of rising and falling spherical wind sensors is developed. The equations of motion of a sensor are perturbed about an equilibrium state in which the buoyancy force balances the mean vertical drag force. It is shown that, to within first order in perturbation quantities, the aerodynamic lift force is confined to the horizontal, and the fluctuating drag force associated with fluctuations in the drag coefficient acts along the vertical. The perturbation equations are transformed with Fourier-Stieltjes integrals. The resulting equations lead to relationships between the power spectra of the aerodynamically induced velocity components and the spectra of the fluctuating lift and drag coefficients.
    Keywords: AERODYNAMICS
    Type: Journal of Applied Meteorology; 11; Apr. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 48
    facet.materialart.
    Unknown
    Multiple-orifice liquid injection into hypersonic air streams. (1972)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Review of oblique water and fluorocarbon injection test results obtained in experimental studies of the effects of multiple-orifice liquid injection into hypersonic air streams. The results include the finding that maximum lateral penetration from such injections increases linearly with the square root of the jet-to-freestream dynamic-pressure ratio and is proportional to an equivalent orifice diameter.
    Keywords: AERODYNAMICS
    Type: AIAA Journal; 10; Dec. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 49
    facet.materialart.
    Unknown
    Electrodynamic sailing - Beating into the solar wind. (1972)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The recent suggestion by Alfven (1972) of a novel means of spacecraft propulsion based upon energy extraction from the electromagnetic field of the solar wind is critically reviewed. In response to this review, the original suggestion is somewhat amplified and clarified by its author.
    Keywords: PROPULSION SYSTEMS
    Type: Science; 178; Dec. 8
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 50
    facet.materialart.
    Unknown
    Lee-side vortices on delta wings at hypersonic speeds. (1972)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: A fluid-dynamic investigation was carried out to determine the cause of intense heating observed on the lee meridian of hypersonic delta wings and also to derive means for its suppression. Several experimental techniques were combined with analysis of extensive heat-transfer measurements at a freestream Mach number of six in a range of Reynolds number to acquire a general description of the lee-flow structure. With attached leading-edge flow on the delta wings, the dominant feature is a pair of embedded vortices on the lee meridian whose interaction with the boundary-layer is responsible for the observed local heating. On the basis of flow visualization results and heat-transfer correlations, a qualitative vortex flow model is proposed which differs essentially from the conventional inboard separation vortex model.
    Keywords: AERODYNAMICS
    Type: AIAA Journal; 10; Nov. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 51
    facet.materialart.
    Unknown
    Simplification of the wing-body interference problem. (1972)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Keywords: AERODYNAMICS
    Type: Journal of Aircraft; 9; Oct. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 52
    facet.materialart.
    Unknown
    Swirling base injection for supersonic combustion ramjets. (1972)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Experimental evaluation of the swirling base injection proposed by Swithenbank and Chigier (1969) for application in supersonic combustion ramjets or scramjets. This concept of accelerated mixing in supersonic streams through swirl was tested, but the results indicate that swirl does not produce any enhancement of mixing.
    Keywords: PROPULSION SYSTEMS
    Type: AIAA Journal; 10; Sept
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 53
    facet.materialart.
    Unknown
    Fusion power for space propulsion. (1972)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Principles of operation, interplanetary orbit-to-orbit mission capabilities, technical problems, and environmental safeguards are examined for thermonuclear fusion propulsion systems. Two systems examined include (1) a fusion-electric concept in which kinetic energy of charged particles from the plasma is converted into electric power (for accelerating the propellant in an electrostatic thrustor) by the van de Graaf generator principle and (2) the direct fusion rocket in which energetic plasma lost from the reactor has a suitable amount of added propellant to obtain the optimum exhaust velocity. The deuterium-tritium and the deuterium/helium-3 reactions are considered as suitable candidates, and attention is given to problems of cryogenic refrigeration systems, magnet shielding, and high-energy particle extraction and guidance.
    Keywords: PROPULSION SYSTEMS
    Type: New Scientist; 54; Apr. 20
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 54
    facet.materialart.
    Unknown
    Ion-thruster propellant utilization. (1972)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Maximum propellant utilization in a mercury electron-bombardment thrustor is evaluated. The primary-electron region in the ion chamber of a bombardment thrustor is analyzed at maximum utilization. Both the analysis and experimental data from a range of ion-chamber configurations show a nearly constant loss rate for un-ionized propellant at maximum utilization over a wide range of total propellant flow rate. The discharge loss level of 1000 eV/ion was used to define maximum utilization. The exact level of this definition has no effect on the qualitative results and little effect on the quantitative results. The results obtained are particularly significant whenever efficient throttled operation is required.
    Keywords: PROPULSION SYSTEMS
    Type: Journal of Spacecraft and Rockets; 9; July 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 55
    facet.materialart.
    Unknown
    Oblique shock-sound interaction at a freestream Mach number of about 20 in helium. (1972)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Detailed experimental measurements of the characteristics and level of pre- and postshock disturbances obtained for typical disturbance modes and shock angles are presented to aid in the evaluation of transition studies conducted in 'noisy' hypersonic wind tunnels. The presented data suggest that the shock is probably generating total temperature fluctuations in a fashion directly related to shock strength. Since in high supersonic and hypersonic flows the total temperature fluctuations are mainly contained in velocity fluctuations, it may be concluded that the predominant disturbances generated are vorticity as long as the postshock flow is at a sufficiently high Mach number.-
    Keywords: AERODYNAMICS
    Type: AIAA Journal; 10; Dec. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 56
    facet.materialart.
    Unknown
    Comparison of advanced propulsion concepts for deep space exploration. (1972)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Equations and charts are presented which permit rapid estimation of propulsion system performance requirements for some typical deep space missions. The simplicity results from use of gravity-free equations of motion, which are shown to yield good approximations to trip times obtained with solar gravity and planetary motion included. The agreement is satisfactory for missions that do not enter or depart from low orbits about the major planets. A number of advanced propulsion concepts for which performance estimates are available are compared with respect to their capability for fly-by, rendezvous, and round-trip planetary missions. Based on these estimates, the gas-core nuclear fission rocket and the pulsed fusion rocket yield the fastest trip times to the near planets. For round trips to Jupiter and beyond, the controlled fusion rocket shows progressively superior capabilities. Several propulsion concepts based on use of impinging laser beams are found to be noncompetitive with the other advanced concepts for deep space missions.
    Keywords: PROPULSION SYSTEMS
    Type: Journal of Spacecraft and Rockets; 9; Dec. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 57
    facet.materialart.
    Unknown
    Turbulent bursts and rings on a cone in helium at Me = 7.6. (1972)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Review of data obtained on turbulent burst geometry and growth characteristics for cone boundary-layer transition in a helium wind tunnel at a boundary-layer edge Mach number (Me) of 7.6. Detailed data concerning turbulent spot geometry and downstream propagation velocities were obtained using a spark schlieren system with sequential spark capability. In one particular test evidence of a symmetrical turbulent burst ring was obtained; all other bursts developed in a singular random manner. Profiles of the apparent outer edges of the bursts were obtained, and the velocities of the leading and trailing edges of the bursts relative to the local velocity were determined. The velocities of the leading and trailing edges were found to be fairly consistent for each observation, with the leading edge of the burst traveling at about local edge velocity, while the trailing edge moved supersonically relative to local speed.
    Keywords: AERODYNAMICS
    Type: AIAA Journal; 10; Oct. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 58
    facet.materialart.
    Unknown
    Radiative and convective heating during Venus entry. (1972)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Determination of the stagnation region heating of probes entering the Venusian atmosphere. Both convective and radiative heat-transfer rates are predicted, and account is taken of the important effects of radiative transport in the vehicle shock layer. A nongray radiative transport model is utilized which parallels a four-band treatment previously developed for air (Page et al., 1969), but includes two additional bands to account for the important CO(4+) molecular band system. Some comparisons are made between results for Venus entry and results for earth entry obtained using a viscous earth entry program.
    Keywords: AERODYNAMICS
    Type: AIAA Journal; 10; Oct. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 59
    facet.materialart.
    Unknown
    Advanced propulsion - Cleaner and quieter. (1972)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Studies were conducted to determine the factors which are significant in advancing propulsion technology. The studies surveyed a wide distribution of variables including aircraft configuration, payload, range, and speed. System studies placed major emphasis on reducing noise and exhaust emissions while attaining good economies and performance. An engine for an advanced transport will probably superficially resemble the presently emerging generation of modern high-bypass and high-temperature turbofan engines, but would incorporate the advances in component and system technology identified by the propulsion system studies. These advances could be used to improve aircraft economics significantly with no increase in noise, or to significantly reduce noise and pollution with few or no economic penalties.
    Keywords: PROPULSION SYSTEMS
    Type: Astronautics and Aeronautics; 10; Aug. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 60
    facet.materialart.
    Unknown
    Calculation of metric coefficients for streamline coordinates. (1972)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: A procedure is given for deriving the equations describing the surface streamline metric in a general form and in a form suitable for incorporation into computer codes to calculate an inviscid flow about three-dimensional bodies. Sample results are included to show the application of the metric in conjunction with an axisymmetric analog to predict heat transfer to a typical space shuttle orbiter.
    Keywords: AERODYNAMICS
    Type: AIAA Journal; 10; Nov. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 61
    facet.materialart.
    Unknown
    Secondary jet interaction with emphasis on outflow and jet location. (1972)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Data were obtained concerning a model which utilized a two-dimensional sonic jet. It was found that outflow and jet location significantly influence the magnitude and behavior of the secondary jet interaction forces. Continued refinements in jet interaction analyses which do not account for outflow are of limited usefulness in the design of control systems for supersonic and hypersonic vehicles. The jet total back pressure ratio increases with either jet pressure ratio or freestream Mach number.
    Keywords: AERODYNAMICS
    Type: Journal of Spacecraft and Rockets; 9; Nov. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 62
    facet.materialart.
    Unknown
    Unmanned planetary spacecraft chemical rocket propulsion. (1972)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Review of some chemical propulsion technology advances suitable for future unmanned spacecraft applications. Discussed system varieties include liquid space-storable propulsion systems, advanced liquid monopropellant systems, liquid systems for rendezvous and landing applications, and low-thrust high-performance solid-propellant systems, as well as hybrid space-storable systems. To optimize the performance and operational characteristics of an unmanned interplanetary spacecraft for a particular mission, and to achieve high cost effectiveness of the entire system, it is shown to be essential that the type of spacecraft propulsion system to be used matches, as closely as possible the various requirements and constraints. The systems discussed are deemed to be the most promising candidates for some of the anticipated interplanetary missions.
    Keywords: PROPULSION SYSTEMS
    Type: Journal of Spacecraft and Rockets; 9; Oct. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 63
    facet.materialart.
    Unknown
    B-70 Aircraft Study (1972)
    In:  CASI
    Details
    Publication Date: 2019-06-28
    Description: This volume contains cost, schedule, and technical information on the following B-70 aircraft subsystems: air induction system, flight control, personnel accommodation and escape, alighting and arresting, mission and traffic control, flight indication, test instrumentation, and installation, checkout, and pre-flight.
    Keywords: AERODYNAMICS
    Type: NASA-CR-115705 , SD-72-SH-0003-VOL-4 , NAS 1.26:115705 , JSC-CN-29834
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 64
    facet.materialart.
    Unknown
    B-70 Aircraft Study (1972)
    In:  CASI
    Details
    Publication Date: 2019-06-28
    Description: Volume 2 of the final report on the B-70 aircraft study is presented here. The B-70 Program, at the onset, was a full weapon system capable of sustained Mach 3 flight for the major portion of its design missions. The weapon system was to enter the SAC inventory as an RS-70 with the first intercontinental resonnaissance/bomber wing scheduled to go operational in July, 1964. After several redirections, a two XB-70 air vehicle program emerged with its prime objective being to demonstrate the technical feasibility of sustained Mach 3 flight. This section describes the original Weapon System 110A concepts, the evolution of the RS-70 design, and the XB-70 air vehicles which demonstrated the design, fabrication, and technical feasibility of long range Mach 3 flights at high altitude. The data presented shows that a very large step forward in the state-of-the-art of manned aircraft design was achieved during the B-70 development program and that advances were made and incorporated in every area, including design, materials application, and manufacturing techniques.
    Keywords: AERODYNAMICS
    Type: NASA-CR-115703 , SD-72-SH-0003-VOL-2 , NAS 1.26:115703 , JSC-CN-29832
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 65
    facet.materialart.
    Unknown
    B-70 Aircraft Study (1972)
    In:  CASI
    Details
    Publication Date: 2019-06-28
    Description: This Phase 2 final report for the B-70 aircraft study contains the data location matrix, which provides a summary of the major cost, schedule, and technical items provided in the report; work breakdown structure; cost definitions; and B-70 program level summary data. The Phase 2 objective was to provide the B-70 aircraft data in accordance with the approved study plan. Several minor modifications to the original plan have been made as the result of the Phase 2 effort.
    Keywords: AERODYNAMICS
    Type: NASA-CR-115702 , SD-72-SH-0003-VOL-1 , NAS 1.26:115702 , JSC-CN-29818
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 66
    facet.materialart.
    Unknown
    Wind-tunnel investigation at Mach numbers from 0.25 to 1.01 of a transport configuration designed to cruise at near-sonic speeds (1972)
    In:  CASI
    Details
    Publication Date: 2019-06-28
    Description: The results of the investigation showed that the configuration exhibits a sufficiently high drag divergence Mach number to cruise at near sonic speeds. The configuration is longitudinally stable through the cruise Mach number and lift coefficient range, but at higher lift coefficients displays pitchup and becomes unstable. The configuration was directionally stable at all test conditions and laterally stable in the angle of attack range required for cruise.
    Keywords: AERODYNAMICS
    Type: NASA-TM-X-2622 , L-8226
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 67
    facet.materialart.
    Unknown
    Static aerodynamic characteristics of a model with a 17 percent thick supercritical wing (1972)
    In:  CASI
    Details
    Publication Date: 2019-06-28
    Description: The statis stability and control characteristics and air loads on the wing and aileron of a 0.09 scale model of an airplane with a 17 percent thick supercritical wing were investigated. The longitudinal aerodynamic characteristics were determined over a lift coefficient range sufficiently high to induce buffet onset at Mach numbers from 0.30 to 0.80. In addition, the lateral aerodynamic characteristics were determined as a function of sideslip angle and angle of attack at selected Mach numbers.
    Keywords: AERODYNAMICS
    Type: NASA-TM-X-2551 , L-8081 , NAS 1.15:X-2551
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 68
    facet.materialart.
    Unknown
    Analysis and testing of stability augmentation systems (1972)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: Testing and evaluation of stability augmentation systems for aircraft flight control were conducted. The flutter suppression system analysis of a scale supersonic transport wing model is described. Mechanization of the flutter suppression system is reported. The ride control synthesis for the B-52 aeroelastic model is discussed. Model analyses were conducted using equations of motion generated from generalized mass and stiffness data.
    Keywords: AERODYNAMICS
    Type: NASA-CR-132349 , D3-8884
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 69
    facet.materialart.
    Unknown
    HEUS-RS applications study, volume 1 (1972)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: Studies are given for sizing and integrating a high energy upper stage restartable solid motor into a flight stage with various payloads for use with Titan 3 and Thor launch vehicles. Motor and stage configurations are given along with performance evaluation of the HEUS-RS with the space shuttle.
    Keywords: PROPULSION SYSTEMS
    Type: NASA-CR-130274 , D2-116262-1-VOL-1
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 70
    facet.materialart.
    Unknown
    Effects of increased leading-edge thickness on performance of a transonic rotor blade (1972)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: A single-stage transonic compressor was tested with two rotor blade leading-edge configurations to investigate the effect of increased leading-edge thickness on the performance of a transonic blade row. The original rotor blade configuration was modified by cutting back the leading edge sufficiently to double the blade leading-edge thickness and thus the blade gap blockage in the tip region. At design speed this modification resulted in a decrease in rotor overall peak efficiency of four points. The major portion of this decrement in rotor overall peak efficienty was attributed to the flow conditions in the outer 30 percent of the blade span. At 70 and 90 percent of design speed, the modification had very little effect on rotor overall performance.
    Keywords: AERODYNAMICS
    Type: NASA-TN-D-7489 , E-7076
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 71
    facet.materialart.
    Unknown
    Apollo 15 mission report. Supplement 3: Ascent propulsion system final flight evaluation (1972)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: Results from the postflight analysis of the ascent propulsion system (APS) performance during the Apollo 15 mission are presented. The duty cycle for the LM-10 APS consisted of two firings, and ascent stage liftoff from the lunar surface and the terminal phase ignition (TPI) burn. An evaluation was made of APS performance for the first firing and found to be satisfactory. No propulsion data was received from the second APS burn; however, all indications were that the burn was nominal. All performance parameters were well within their LM-10 3-sigma limits. Calculated throat erosion at engine cutoff for the LM-10 APS was approximately 3 percent greater than predicted.
    Keywords: PROPULSION SYSTEMS
    Type: NASA-TM-X-68932 , TRW-20029-H062-R0-00 , MSC-05161-SUPPL-3
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 72
    facet.materialart.
    Unknown
    Multiple element airfoils optimized for maximum lift coefficient. (1972)
    In:  Other Sources
    Details
    Publication Date: 2019-06-27
    Description: Optimum airfoils in the sense of maximum lift coefficient are obtained for incompressible fluid flow at large Reynolds number. The maximum lift coefficient is achieved by requiring that the turbulent skin friction be zero in the pressure rise region on the airfoil upper surface. Under this constraint, the pressure distribution is optimized. The optimum pressure distribution is a function of Reynolds number and the trailing edge velocity. Geometries of those airfoils which will generate these optimum pressure distributions are obtained using a direct-iterative method which is developed in this study. This method can be used to design airfoils consisting of any number of elements. Numerical examples of one- and two-element airfoils are given. The maximum lift coefficients obtained range from 2 to 2.5.
    Keywords: AERODYNAMICS
    Type: AIAA Journal; 10; Dec. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 73
    facet.materialart.
    Unknown
    Study of solid rocket motor for space shuttle booster, Volume 3: Program acquisition planning (1972)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: The program planning acquisition functions for the development of the solid propellant rocket engine for the space shuttle booster is presented. The subjects discussed are: (1) program management, (2) contracts administration, (3) systems engineering, (4) configuration management, and (5) maintenance engineering. The plans for manufacturing, testing, and operations support are included.
    Keywords: PROPULSION SYSTEMS
    Type: NASA-CR-124238 , TWR-5672-VOL-3 , PUBL-0372-36176 , A10738
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 74
    facet.materialart.
    Unknown
    Apollo 14 mission report. Supplement 5: Descent propulsion system final flight evaluation (1972)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: The performance of the LM-8 descent propulsion system during the Apollo 14 mission was evaluated and found to be satisfactory. The average engine effective specific impulse was 0.1 second higher than predicted, but well within the predicted l sigma uncertainty. The engine performance corrected to standard inlet conditions for the FTP portion of the burn at 43 seconds after ignition was as follows: thrust, 9802, lbf; specific impulse, 304.1 sec; and propellant mixture ratio, 1603. These values are + or - 0.8, -0.06, and + or - 0.3 percent different respectively, from the values reported from engine acceptance tests and were within specification limits.
    Keywords: PROPULSION SYSTEMS
    Type: NASA-TM-X-69491 , MSC-04112-SUPPL-5 , TRW-17618-H219-R0-00-SUPPL-5
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 75
    facet.materialart.
    Unknown
    Study of solid rocket motors for a space shuttle booster. Volume 1: Executive summary (1972)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: An analysis of the solid propellant rocket engines for use with the space shuttle booster was conducted. A definition of the specific solid propellant rocket engine stage designs, development program requirements, production requirements, launch requirements, and cost data for each program phase were developed.
    Keywords: PROPULSION SYSTEMS
    Type: NASA-CR-124236 , TWR-5672-VOL-1 , PUBL-0372-36174 , A09995
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 76
    facet.materialart.
    Unknown
    Liquid propellant gas generators (1972)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: The design of gas generators intended to provide hot gases for turbine drive is discussed. Emphasis is placed on the design and operation of bipropellant gas generators because of their wider use. Problems and limitations involved in turbine operation due to temperature effects are analyzed. Methods of temperature control of gas turbines and combustion products are examined. Drawings of critical sections of gas turbines to show their operation and areas of stress are included.
    Keywords: PROPULSION SYSTEMS
    Type: NASA-SP-8081
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 77
    facet.materialart.
    Unknown
    Rocket nozzle coolant channel thermal analysis program (E25107) (1972)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: A complete description of the liquid cooled rocket nozzle analysis program (E25107) is presented, including a users manual, program listing, and a sample problem. The program is recommended for use in designing liquid cooled rocket nozzles. In addition, it is adaptable to any system in which a liquid-cooled tubular structure is used to contain and direct the flow of a hot gas.
    Keywords: PROPULSION SYSTEMS
    Type: NASA-CR-132185 , N8110R:72-036
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 78
    facet.materialart.
    Unknown
    Study of solid rocket motor for space shuttle booster, volume 2, book 2 (1972)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: A technical analysis of the solid propellant rocket engines for use with the space shuttle is presented. The subjects discussed are: (1) solid rocket motor stage recovery, (2) environmental effects, (3) man rating of the solid propellant rocket engines, (4) system safety analysis, (5) ground support equipment, and (6) transportation, assembly, and checkout.
    Keywords: PROPULSION SYSTEMS
    Type: NASA-CR-123926 , TWR-5672-VOL-2-BK-2
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 79
    facet.materialart.
    Unknown
    Study of solid rocket motor for space shuttle booster, volume 2, book 3, appendix A (1972)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: A systems requirements analysis for the solid propellant rocket engine to be used with the space shuttle was conducted. The systems analysis was developed to define the physical and functional requirements for the systems and subsystems. The operations analysis was performed to identify the requirements of the various launch operations, mission operations, ground operations, and logistic and flight support concepts.
    Keywords: PROPULSION SYSTEMS
    Type: NASA-CR-123728 , TWR-5672-VOL-2-BK-3-APP-A
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 80
    facet.materialart.
    Unknown
    Study of solid rocket motor for space shuttle booster, volume 2, book 5, appendices E thru H (1972)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: Preliminary parametric studies were performed to establish size, weight and packaging arrangements for aerodynamic decelerator devices that could be used for recovery of the expended solid propellant rocket motors used in the launch phase of the Space Shuttle System. Computations were made using standard engineering analysis techniques. Terminal stage parachutes were sized to provide equilibrium descent velocities for water entry that are presently thought to be acceptable without developing loads that could exceed the boosters structural integrity. The performance characteristics of the aerodynamic parachute decelerator devices considered are based on analysis and prior test results for similar configurations and are assumed to be maintained at the scale requirements of the present problem.
    Keywords: PROPULSION SYSTEMS
    Type: NASA-CR-123730 , TWR-5672-VOL-2-BK-5-APP-E-H
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 81
    facet.materialart.
    Unknown
    Study of solid rocket motor for space shuttle booster, volume 2, book 1 (1972)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: The technical requirements for the solid propellant rocket engine to be used with the space shuttle orbiter are presented. The subjects discussed are: (1) propulsion system definition, (2) solid rocket engine stage design, (3) solid rocket engine stage recovery, (4) environmental effects, (5) manrating of the solid rocket engine stage, (6) system safety analysis, and (7) ground support equipment.
    Keywords: PROPULSION SYSTEMS
    Type: NASA-CR-123729 , PUBL-0372-36175 , TWR-5672-VOL-2-BK-1
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 82
    facet.materialart.
    Unknown
    Apollo 15 mission report. Supplement 3: Ascent propulsion system final flight evaluation (1972)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: The results are presented of the postflight analysis of the ascent propulsion system (APS) performance during the Apollo 15 Mission. The information presented includes: (1) calculated performance values for the APS lunar liftoff burn; (2) disucssion of analysis techniques, problems and assumptions; (3) comparison of postflight analysis and preflight prediction; (4) reaction control system (RCS) duty cycle included in the APS performance analysis; (5) transient performance analysis; and (6) the APS propellant consumption values.
    Keywords: PROPULSION SYSTEMS
    Type: NASA-TM-X-69204 , MSC-05161-SUPPL-3
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 83
    facet.materialart.
    Unknown
    Experimental quiet engine program aerodynamic performance of Fan C (1972)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: This report presents the aerodynamic component test results of Fan C, a high-bypass-ratio, low-aerodynamic-loading, 1550 feet per second (472.4 m/sec), single-stage fan, which was designed and tested as part of the NASA Experimental Quiet Engine Program. The fan was designed to deliver a bypass pressure ratio of 1.60 with an adiabatic efficiency of 84.2 percent at a total fan flow of 915 lb/sec (415.0 kg/sec). It was tested with and without inlet distortion. A bypass total-pressure ratio of 1.61 and an adiabatic efficiency of 83.9 percent at a total fan flow of 921 lb/sec (417.8 kg/sec) were actually achieved. An operating margin in excess of 14.6 percent was demonstrated at design speed.
    Keywords: PROPULSION SYSTEMS
    Type: NASA-CR-120981
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 84
    facet.materialart.
    Unknown
    Strengthening of oxidation resistant materials for gas turbine applications (1972)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: Compressive surface layers were formed on hot-pressed silicon carbide and nitride. The objective of these treatments was to improve the impact resistance of these materials at 1590 K (2400 F). Quenching was used to form compressive surface layers on silicon carbide. The presence of the compressive stresses was demonstrated by slotted rod tests. Compressive stresses were retained at elevated temperatures. Improvements in impact resistance at 1590 K (2400 F) and flexural strength at room temperature were achieved using cylindrical rods 3.3 mm (0.13 in.) in diameter. Carburizing treatments were used to form the surface layers on silicon nitride. In a few cases using rectangular bars improvements in impact resistance at 1590 K (2400 F) were observed.
    Keywords: PROPULSION SYSTEMS
    Type: NASA-CR-121002
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 85
    facet.materialart.
    Unknown
    Development of a multikilowatt ion thruster power processor (1972)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: A feasibility study was made of the application of silicon-controlled, rectifier series, resonant inverter, power conditioning technology to electric propulsion power processing operating from a 200 to 400 Vdc solar array bus. A power system block diagram was generated to meet the electrical requirements of a 20 CM hollow cathode, mercury bombardment, ion engine. The SCR series resonant inverter was developed as a primary means of power switching and conversion, and the analog signal-to-discrete-time-interval converter control system was applied to achieve good regulation. A complete breadboard was designed, fabricated, and tested with a resistive load bank, and critical power processor areas relating to efficiency, weight, and part count were identified.
    Keywords: PROPULSION SYSTEMS
    Type: NASA-CR-120928
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 86
    facet.materialart.
    Unknown
    Experimental aerodynamic characteristics of 120 deg included-angle cone with attached and separated 20 deg included-angle cone at Mach numbers of 2.36 and 2.70 (1972)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: An investigation has been conducted in a unitary plan wind tunnel to determine the aerodynamic characteristics of two different size blunt 120 deg-included-angle cones behind a 20 deg-included-angle cone. Forces and moments were measured at Mach numbers of 2.36 and 2.70, longitudinal separation distances from 0 to 3.5 body diameters, lateral (side) distances from 0 to 0.50 body diameter, angles of attack of the 120 deg-included-angle cone from 0.5 deg to 22 deg, angles of attack of the 20 deg-included-angle cone from 0 deg to 180 deg, and a Reynolds number of one million per foot. Large variations in pitching-moment, normal-force, and axial-force coefficients were noted for both Mach numbers and all longitudinal distances for the 120 deg cones in the wake of a 20 deg cone.
    Keywords: AERODYNAMICS
    Type: NASA-TM-X-2603 , L-8424
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 87
    facet.materialart.
    Unknown
    A theory of supercritical wing sections, with computer programs and examples. (1972)
    In:  Other Sources
    Details
    Publication Date: 2019-06-27
    Description: Mathematical methods for the design of supercritical wings, which depend on the numerical solution of the partial differential equations of two-dimensional gas dynamics, are developed. The main contribution is a computer program for the design of shockless transonic airfoils using the hodograph transformation and analytic continuation into the complex domain. The mathematical theory is described, and a manual for users of the programs is provided. Numerical examples are given and computational results are discussed, and the computer programs themselves are listed. The analysis routine can be used to ascertain whether the profiles behave well at off-design conditions, or to smooth coordinates and obtain a desirable shape more quickly when perfectly shockless flow is not essential.
    Keywords: AERODYNAMICS
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 88
    facet.materialart.
    Unknown
    Technology development of a biowaste resistojet, volume 1 (1972)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: The materials research effort conducted in support of a NASA-sponsored biowaste resistojet development program is summarized. The resistojet concept under development is the concentric tube design wherein the final pass of the gases through the thruster is through the resistance heated center tube. To produce high specific impulses, this center tube must operate at very high temperatures and it is this element that is most critical in the design. Because of the corrosive nature of the biowaste gases at high temperature, and because of the limited data available for many potential materials, the subject materials study was conducted.
    Keywords: PROPULSION SYSTEMS
    Type: NASA-CR-112149
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 89
    facet.materialart.
    Unknown
    Experimental investigation of combustor effects on rocket thrust chamber performance (1972)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: A design and experimental program to develop special instrumentation systems, design engine hardware, and conduct tests using LOX/GH2 propellants in which the propellant flow stratification was controlled is described. The mixture ratio was varied from 4.6 to 6 overall. The mixture ratios in the core and outer zone were varied from 3.5 to 6 and 5 to 8, respectively. The range in boundary layer coolant was from 0 to 10 percent of the fuel. The nominal chamber pressure and thrust were 225 psia and 7000 pounds, respectively. Pressure and heat flux profiles as well as gas sampling of the exhaust products were obtained. Specific impulse efficiencies of approximately 94 percent and characteristic velocity efficiencies of approximately 97 percent were obtained during the experiments.
    Keywords: PROPULSION SYSTEMS
    Type: NASA-CR-128318 , R-8903
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 90
    facet.materialart.
    Unknown
    Application of the leading edge suction analogy to prediction of longitudinal load distribution and pitching moments for sharp edged delta wings (1972)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: The leading-edge-suction analogy of Polhamus has been used to develop the longitudinal load distribution of the vortex lift for delta wings. This distribution is shown to be similar in shape to that of the potential-flow longitudinal loading for delta wings having aspect ratios of 2 or less. The totals of the two theoretical distributions for delta wings with an aspect ratio near 1 are in good agreement with the experimentally determined loadings over the angle-of-attack range from 0 to 30 deg. The corresponding predicted pitching moments show slightly more stability than those measured, because of loss of lift near the wing tips.
    Keywords: AERODYNAMICS
    Type: NASA-TN-D-6994 , L-8224
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 91
    facet.materialart.
    Unknown
    Filament-wound graphite/epoxy rocket motor case (1972)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: The fabrication procedures are described for a filament-wound rocket motor case, approximately 56 cm long x 71 cm diameter, utilizing high tensile strength graphite fibers. The process utilized Fiberite Hy-E-1330B prepreg tape which consists of Courtaulds HTS fibers in a temperature-sensitive epoxy matrix. This fabrication effort, with resultant design, material and process recommendations, substantiates the manufacturing feasibility of graphite/epoxy rocket motor cases in the 56 cm x 71 cm size range.
    Keywords: PROPULSION SYSTEMS
    Type: NASA-CR-128417 , BC-8845-FAB
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 92
    facet.materialart.
    Unknown
    A concept for jet noise suppression for an afterburning turbojet engine (1972)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: A conceptual design of an afterburner system for turbojet engines which may reduce the jet exhaust noise by approximately 10 decibels is presented in this report. The proposed system consists of an array of swirl-can combustors and jet dividing nozzle tubes. The nozzle tubes translate axially upstream of the swirl cans when not in use. Results of preliminary design calculations and photographs of a kinematic model as applied to a hypothetical turbojet engine are presented.
    Keywords: PROPULSION SYSTEMS
    Type: NASA-TM-X-68144 , E-7167
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 93
    facet.materialart.
    Unknown
    An invariant second-order closure model of the compressible turbulent boundary layer on a flat plate (1972)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: The development of an invariant model designed expressly for the computation of shear flows is discussed. The model for incompressible layers seeks a second-order closure of the equations for the mean and fluctuating fields. The development of a method for computing the behavior of shear layers in compressible forces is described. The complexity of the analysis is restrained by limiting the consideration to a flat plate boundary layer where the mean pressure can be taken to be constant.
    Keywords: AERODYNAMICS
    Type: NASA-CR-128172
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 94
    facet.materialart.
    Unknown
    Flight investigation of an air-cooled plug nozzle with afterburning turbojet (1972)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: A convectively cooled plug nozzle, using 4 percent of the engine air as the coolant, was tested in 1967 K (3540 R) temperature exhaust gas. No significant differences in cooling characteristics existed between flight and static results. At flight speeds above Mach 1.1, nozzle performance was improved by extending the outer shroud. Increasing engine power improved nozzle efficiency considerably more at Mach 1.2 than at 0.9. The effect of nozzle pressure ratio and secondary weight flow on nozzle performance are also presented.
    Keywords: PROPULSION SYSTEMS
    Type: NASA-TM-X-2607 , E-6676
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 95
    facet.materialart.
    Unknown
    Experimental dynamic response of a two-dimensional, Mach 2.7, mixed compression inlet (1972)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: A test program was conducted on a two-dimensional supersonic inlet. Internal disturbances in diffuser exit mass flow were produced by oscillating overboard bypass doors. Open-loop dynamic responses of shock position, throat exit and diffuser exit static pressures are presented. The steady-state and dynamic coupling between ducts were also obtained. The experimental results from the two-dimensional inlet are compared to results from a similar size axisymmetric inlet and also to a transfer function synthesis program.
    Keywords: PROPULSION SYSTEMS
    Type: NASA-TN-D-6957 , E-7002
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 96
    facet.materialart.
    Unknown
    Cold-air investigation of a turbine for high-temperature-engine application. 4: Two-stage turbine performance (1972)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: The efficiency of a two-stage turbine is discussed. The turbine efficiency was 0.932 for equivalent design operating conditions (speed) and specific work, which compares closely to the value of 0.929 that would be estimated using the first-stage efficiency. The mass flow obtained with the two-stage configuration indicated that the mass flow characteristics of the two stages were closely matched at design operating conditions. The stage work split at these conditions was 0.505-0.495, which was close to the design work split of 0.515-0.485.
    Keywords: PROPULSION SYSTEMS
    Type: NASA-TN-D-6960 , E-6912
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 97
    facet.materialart.
    Unknown
    High temperature compounds for turbine vanes (1972)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: Fabrication and microstructure control studies were conducted on SiC, Si3N4, and composites based on these compounds. Charpy mode impact testing to 2400 F established that beta-spodumene, lithium aluminum silicate, coated Si3N4, Si3N4 derived from alpha-Si3N4 powder, and SiC containing 5-25 v/o chopped C fibers had the most promising strengths. Several other composite systems had excellent microstructures and could prove interesting materials in the future. Stress-rupture testing on Si3N4 established that increasing 2000 F - 100 hour strengths were obtained for increasing grain size to at least 5 micrometers, increasing density and possibly increasing phase purity. These parameters became less important at 2400 F where it is thought a grain boundary phase controls strength.
    Keywords: PROPULSION SYSTEMS
    Type: NASA-CR-120966 , AVSD-0336-72-CR
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 98
    facet.materialart.
    Unknown
    Comparison of advanced propulsion concepts for deep space exploration (1972)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: Equations and charts are presented that permit rapid estimation of propulsion-system performance requirements for some typical deep-space missions. A number of advanced propulsion concepts for which performance estimates are available are compared with respect to their capability for flyby, rendezvous, and roundtrip planetary missions. Based on these estimates, the gas-core nuclear fission rocket and the pulsed fusion rocket yield the fastest trip times to the near planets. For round trips to Jupiter and beyond, the controlled fusion rocket shows progressively superior capabilities. Several propulsion concepts based on use of impinging laser beams are found to be noncompetitive with the other advanced concepts for deep space missions. Requirements for attainment of interstellar distances within a human lifetime are found to be some orders of magnitude beyond the capabilities of any propulsion concepts for which performance estimates are now possible.
    Keywords: PROPULSION SYSTEMS
    Type: NASA-TN-D-6968 , E-6798
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 99
    facet.materialart.
    Unknown
    A graphite-lined regeneratively cooled thrust chamber (1972)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: Design concepts, based on use of graphite as a thermal barrier for regeneratively cooled FLOX-methane thrust chambers, have been screened and concepts selected for detailed thermodynamic, stress, and fabrication analyses. A single design employing AGCarb-101, a fibrous graphite composite material, for a thermal barrier liner and an electroformed nickel structure with integral coolant passages was selected for fabrication and testing. The fabrication processes and the test results are described and illustrated.
    Keywords: PROPULSION SYSTEMS
    Type: NASA-CR-120853
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 100
    facet.materialart.
    Unknown
    Factors affecting altitude relight performance of a double-annular ram-induction combustor (1972)
    In:  CASI
    Details
    Publication Date: 2019-06-27
    Description: A test program was conducted to evaluate the altitude relight capabilities of a short-length, double-annular, ram-induction combustor which was designed for Mach 3 cruise operation. The use of distorted inlet-air flow profiles was tried to evaluate their effect on the relight performance. No significant improvement in altitude relight performance was obtained with this approach. A study was also made to determine the effects of the reference Mach number, the fuel temperature, and the fuel volatility (ASTM-A1 against JP-4) on the altitude relight performance. Decreasing the reference Mach number, increasing the fuel temperature, and using more volatile fuel all decrease the combustor pressure necessary for relight.
    Keywords: PROPULSION SYSTEMS
    Type: NASA-TM-X-2630 , E-6788
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
Close ⊗
This website uses cookies and the analysis tool Matomo. More information can be found here...