ALBERT

All Library Books, journals and Electronic Records Telegrafenberg

X
feed icon rss

Your email was sent successfully. Check your inbox.

An error occurred while sending the email. Please try again.

Proceed reservation?

Export
Filter
  • Chemistry  (11,074)
  • SPACE VEHICLES  (1,153)
  • STRUCTURAL MECHANICS  (606)
  • Humans
  • 1970-1974  (12,833)
  • 1973  (6,480)
  • 1972  (6,353)
Collection
Keywords
Publisher
Years
  • 1970-1974  (12,833)
Year
  • 1
    facet.materialart.
    Unknown
    Composite systems utilization for space shuttle structures (1972)
    In:  CASI
    Details
    Publication Date: 2005-11-30
    Description: Research and development of composite material systems to show applicability of these materials to shuttle structures and to demonstrate availability through a hardware development program is reported. The various configurations studied and potential areas of composite structures use are described and an outline of ongoing composite programs, complementing the indicated feasible applications, including a typical cost study, is shown. The following composite systems are investigated: Boron filaments with epoxy, polyimide, or aluminum matrix, and graphite filaments with epoxy or polyimide matrix.
    Keywords: SPACE VEHICLES
    Type: NASA Space Shuttle Technol. Conf.; p 605-644
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 2
    facet.materialart.
    Unknown
    Flight loads and control (1972)
    In:  CASI
    Details
    Publication Date: 2005-11-30
    Description: The prediction of flight loads and their potential reduction, using various control logics for the space shuttle vehicles, is very complex. Some factors, not found on previous launch vehicles, that increase the complexity are large lifting surfaces, unsymmetrical structure, unsymmetrical aerodynamics, trajectory control system coupling, and large aeroelastic effects. Discussed are these load producing factors and load reducing techniques. Identification of potential technology areas is included.
    Keywords: SPACE VEHICLES
    Type: NASA Space Shuttle Technol. Conf.; p 175-203
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 3
    facet.materialart.
    Unknown
    New considerations for pogo prevention on space shuttle (1972)
    In:  CASI
    Details
    Publication Date: 2005-11-30
    Description: Recommendations for improving the methodology of pogo suppression for the space shuttle include: Consideration of inter-pump location for accumulator or active device, inclusion of tank outflow effects in dynamic structural analysis, the use of simplified transfer functions in systems studies, three phase dynamic testing program for turbopump with development of dynamic flowmeters, and the use of a linearized mathematical model for engine physics studies.
    Keywords: SPACE VEHICLES
    Type: NASA, Washington NASA Space Shuttle Technol. Conf.; p 97-116
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 4
    facet.materialart.
    Unknown
    Development of methods for fracture control of space shuttle structures (1972)
    In:  CASI
    Details
    Publication Date: 2005-11-30
    Description: The technology with respect to fracture control requirements of the shuttle is considered. The current state-of-the-art does permit an approach based on linear elastic fracture mechanics concepts. Development and implementation of a fracture control plan should recognize deficiencies and provide adequate resources for the extensive empirical test data which are required. With respect to the cost impact of such tests, recent experiences involving advanced aircraft systems have seen unit cost increases of from 200 to 500 percent.
    Keywords: SPACE VEHICLES
    Type: NASA Space Shuttle Technol. Conf.; p 727-770
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 5
    facet.materialart.
    Unknown
    Docking devices for Soyuz-type spacecraft (1972)
    In:  CASI
    Details
    Publication Date: 2005-11-30
    Description: Two docking device designs for Soyuz-type spacecraft are compared. The first was flight tested successfully; the second achieves rigid and exact joining of two spacecraft, while incorporating changes to allow for the intravehicular transfer of crew members. The main functions of the docking device are considered, with the means by which they are accomplished, and measures for increasing its reliability and flexibility in service are noted.
    Keywords: SPACE VEHICLES
    Type: 6th Aerospace Mech. Symp.; p 143-150
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 6
    facet.materialart.
    Unknown
    Aerospace transporter and lifting body activities in Europe and potential participation in the development of the space shuttle orbiter (1972)
    In:  CASI
    Details
    Publication Date: 2005-11-30
    Description: The course of European aerospace research regarding reentry problems is briefly reviewed for the period from 1966 up to the present. The considerable experience gained by Europe, and particularly Germany, is shown to have led to their involvement and participation in the U.S. space shuttle program. The areas of investigation and expected contributions by European cooperation in the shuttle program are outlined.
    Keywords: SPACE VEHICLES
    Type: NASA. Langley Res. Center Space Shuttle Aerothermodyn. Technol. Conf., vol. 3; p 969-995
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 7
    facet.materialart.
    Unknown
    Status of reusable surface insulation thermal protection system technology programs (1972)
    In:  CASI
    Details
    Publication Date: 2005-11-30
    Description: The development of three low-density rigidized insulation materials for the shuttle TPS application is reported. These materials consist of one high purity silica system and two systems based on mullite, an aluminum silicate. Both systems consist of fibers joined together with appropriate binders to obtain a rigidized insulation composite. Both material systems require the application of a glassy coating to provide a wear resistant, high emittance surface and to prevent the absorption of water by the fiber matrix. The technology program has addressed the development of water impervious coatings, methods of assembling the materials in design concepts while minimizing the thermal stress in the insulation, achieving compatibility between the RSI material and the structural system, and test evaluations to demonstrate the feasibility of the surface insulation concept.
    Keywords: SPACE VEHICLES
    Type: NASA Space Shuttle Technol. Conf.; p 435-474
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 8
    facet.materialart.
    Unknown
    Overview of technology relative to the pogo instability on space shuttle (1972)
    In:  CASI
    Details
    Publication Date: 2005-11-30
    Description: The prediction of pogo contains a major source of uncertainty in the difficulty of defining the dynamic characteristics of certain components. An overview of the space shuttle technology with respect to each the following pogo problem areas is presented: structure, tank-liquid interaction, feedline, engine (pump), pogo-loop/control-loop interaction, and stability analysis.
    Keywords: SPACE VEHICLES
    Type: NASA Space Shuttle Technol. Conf.; p 117-138
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 9
    facet.materialart.
    Unknown
    Assessment of potential buffet problems on the space shuttle vehicle (1972)
    In:  CASI
    Details
    Publication Date: 2005-11-30
    Description: Buffet of the space shuttle launch and reentry configuration is an area requiring continued evaluation to produce a safe reliable vehicle of minimum weight. Buffet forces result from flow separation and therefore can not be predicted accurately. Buffet loads are highly sensitive to configuration, angle of attack, and Mach number and can be reliably determined only by wind tunnel tests of elastically scaled models.
    Keywords: SPACE VEHICLES
    Type: NASA Space Shuttle Technol. Conf.; p 25-43
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 10
    facet.materialart.
    Unknown
    Dynamic analysis for shuttle design verification (1972)
    In:  CASI
    Details
    Publication Date: 2005-11-30
    Description: Two approaches that are used for determining the modes and frequencies of space shuttle structures are discussed. The first method, direct numerical analysis, involves finite element mathematical modeling of the space shuttle structure in order to use computer programs for dynamic structural analysis. The second method utilizes modal-coupling techniques of experimental verification made by vibrating only spacecraft components and by deducing modes and frequencies of the complete vehicle from results obtained in the component tests.
    Keywords: SPACE VEHICLES
    Type: NASA Space Shuttle Technol. Conf.; p 205-230
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 11
    facet.materialart.
    Unknown
    Surface studies on Surveyor 3 tubing sections (1972)
    In:  CASI
    Details
    Publication Date: 2005-11-30
    Description: Sections C and E of the unpainted, polished aluminum tubing from the strut of the radar altimeter and Doppler velocity sensor were examined in a transmission electron microscope for micrometeorite damage and ion bombardment. Both sections were contaminated and eroded on one side; it is suggested that these conditions were caused by sandblasting by lunar dust and retrorocket plume contamination during Surveyor 3 landing. Microcraters of different configurations were found on the bright sides of the tubes. Several degrees of violence were involved in the formation of the craters, and the particle size could be responsible for some differences. All micropits found were on the bright areas and data indicate 0.2 hypervelocity impact/sq cm and 2/sq cm for other types of craters. The greatest degree of damage resulted from particle impact and was limited to a maximum depth of 2 microns.
    Keywords: SPACE VEHICLES
    Type: NASA, Washington Analysis of Surveyor 3 Mater. and Phot. Returned by Apollo 12; p 154-158
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 12
    facet.materialart.
    Unknown
    Aerodynamic studies of delta-wing shuttle orbiters. Part 2: Hypersonics (1972)
    In:  CASI
    Details
    Publication Date: 2005-11-30
    Description: An early version of an external hydrogen-oxygen tank orbiter was used as a baseline vehicle to experimentally evaluate: (1) nose shape and canopy effects on longitudinal, lateral, and directional stability and trim, and (2) yaw due to aerodynamic roll control at hypersonic speeds. Nose alterations were examined since that part of the vehicle may be subject to modifications because of internal packaging requirements, alleviation of potential high heating areas, and/or possible improvements in aerodynamic stability and control. There was also some concern about the effect of the rather high profile canopy on the aerodynamics; therefore its removal was examined. In addition, roll-yaw coupling was investigated because of its impact on the RCS fuel requirements for entry maneuvers.
    Keywords: SPACE VEHICLES
    Type: Space Shuttle Aerothermodyn. Technol. Conf., vol. 3; p 803-830
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 13
    facet.materialart.
    Unknown
    Impact of subsonic aerodynamic considerations on a space shuttle booster configuration (1972)
    In:  CASI
    Details
    Publication Date: 2005-11-30
    Description: Considerations of cruise-back efficiency and subsonic flying qualities are shown to have resulted in a configuration with an aft high wing of moderate aspect ratio and with vertical tails located at the wing tips. The need to protect the air breathing engines during ascent and reentry and the desire for a low trim penalty longitudinal control surface led to consideration of a jet-flap canard. The advantages of this application of STOL technology to a space system are examined and the results of both wind tunnel tests and flight simulations are discussed. Since the use of the jet-flap canard concept offers the potential for a minimum weight vehicle, a proposed technology development program is outlined in order that the full benefit of this concept may be realized.
    Keywords: SPACE VEHICLES
    Type: NASA. Langley Res. Center Space Shuttle Aerothermodyn. Technol. Conf., vol.3; p 737-784
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 14
    facet.materialart.
    Unknown
    On the possibility of Earth reentry simulation of shallow angle Jupiter entry (1972)
    In:  CASI
    Details
    Publication Date: 2005-11-30
    Description: Possible Earth reentry simulation of shallow-angle (3 to 30 deg) Jupiter entry was investigated in terms of four parameters of the bow shock layer ahead of a blunt vehicle: peak (equilibrium) temperature, peak pressure, peak inward radiative flux, and time-integrated radiative flux. It is shown that simulation ranging from fair to good can be achieved. Reentry is easiest (lowest Earth reentry speed) at steep Earth reentry, in the Earth entry speed range of 15 to 22 km/sec, for both the Jupiter nominal and cool atmospheres. Increased Earth speed is required, generally, for increasing Jupiter entry angle, and for increasing temperature, radiative flux, time-integrated flux and pressure, in that order.
    Keywords: SPACE VEHICLES
    Type: JPL Quart. Tech. Rev., Vol. 1, No. 4; p 19-29
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 15
    facet.materialart.
    Unknown
    Assessment of advances in structural analysis for space shuttle (1972)
    In:  CASI
    Details
    Publication Date: 2005-11-30
    Description: The latest technology for structural analysis in relation to the design tasks that lie ahead for the space shuttle is reviewed. For shell-of-revolution structures, the analysis can be formulated as a one-dimensional problem which is readily solved by using finite-difference or numerical-integration techniques. For more general asymmetric shells, a two-dimensional formulation is required. However, the governing equations are readily formulated and are amenable to solution by finite-difference techniques. For a completely general structural arrangement, such as structural frameworks, recourse is usually made to discretized formulations using finite elements. Of course, the finite-element programs could be used for shell structures, but at a loss in accuracy and increase in computer time compared with the special purpose programs.
    Keywords: STRUCTURAL MECHANICS
    Type: NASA Space Shuttle Technol. Conf.; p 685-725
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 16
    facet.materialart.
    Unknown
    Application of composite materials to space shuttle tanks (1972)
    In:  CASI
    Details
    Publication Date: 2005-11-30
    Description: Tanks are broken down into two categories: pressure vessels that carry primarily pressure loads, and structural tanks that carry structural loads such as thrust or bending in addition to pressure. A significant portion of the shuttle orbiter structure are tanks and in order to minimize both weight and cost growth on these shuttle tank structures, composite material tanks of both types are considered.
    Keywords: SPACE VEHICLES
    Type: NASA Space Shuttle Technol. Conf.; p 573-603
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 17
    facet.materialart.
    Unknown
    Advanced design concepts for shuttle airframe structure (1972)
    In:  CASI
    Details
    Publication Date: 2005-11-30
    Description: The development of weight-saving advanced design concepts for shuttle airframe structure is presented. Design concepts under investigation employ selective composite reinforcement and/or efficient geometric arrangements. An effort to develop metallic panel designs which exploit the relaxation of smooth external-surface requirements for skin structure is reviewed. Available highlights from research and development studies which investigate the application of composite reinforcement to the design of two types of fuselage panels, a shear web, a large fuselage frame, and a landing-gear-door assembly are presented. Preliminary results from these studies suggest weight savings of 25 percent can be obtained.
    Keywords: SPACE VEHICLES
    Type: NASA Space Shuttle Technol. Conf.; p 537-572
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 18
    facet.materialart.
    Unknown
    Flutter technology for space shuttle (1972)
    In:  CASI
    Details
    Publication Date: 2005-11-30
    Description: The development of analytical and experimental techniques needed to predict space shuttle flutter boundaries and insure adequate flutter margins and anticipated problems associated with aeroelastic-model and full-scale testing to validate flutter clearance are considered. Results illustrating the best available tools for subsonic and supersonic flutter prediction are presented. Programs currently underway which will help overcome the difficult problems envisioned for the transonic wind-tunnel and flight flutter test program are also discussed.
    Keywords: SPACE VEHICLES
    Type: NASA Space Shuttle Technol. Conf.; p 1-24
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 19
    facet.materialart.
    Unknown
    Gas-powered reentry body erection mechanism (1972)
    In:  CASI
    Details
    Publication Date: 2005-11-30
    Description: The design, analysis, testing, and flight of the supersonic planetary entry decelerator 2 spacecraft are described. The vehicle was launched in a folded condition and deployed to its required configuration following exit from the atmosphere. This concept was selected primarily because it allows utilization of existing launch vehicle systems in the most economical manner possible.
    Keywords: SPACE VEHICLES
    Type: 6th Aerospace Mech. Symp.; p 101-107
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 20
    facet.materialart.
    Unknown
    Satellite temperature correlation of predicted, test, and flight data (1972)
    In:  CASI
    Details
    Publication Date: 2005-11-30
    Description: This study compares satellite temperature predictions with thermal vacuum test results and shows the improvement from testing. Orbital data were compared with prediction/test results to determine quantitatively an expected error criteria.
    Keywords: SPACE VEHICLES
    Type: NASA. Goddard Space Flight Center Space Simulation; p 425-443
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 21
    facet.materialart.
    Unknown
    Experiments on the dynamic stability of the space shuttle (1972)
    In:  CASI
    Details
    Publication Date: 2005-11-30
    Description: Some dynamic stability experiments on the space shuttle using a half-model oscillatory technique are discussed. Resulting information from the experiments is presented and includes: (1) dynamic pitching characteristics of both the orbiter and the booster alone as well as of the two models mated into a single launch configuration; (2) the static and dynamic interference effects during an abort separation maneuver; and (3) the dynamic plume interference effect.
    Keywords: SPACE VEHICLES
    Type: NASA. Langley Res. Center Space Shuttle Aerothermodyn. Technol. Conf., vol. 3; p 933-968
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 22
    facet.materialart.
    Unknown
    Dynamic testing for shuttle design verification (1972)
    In:  CASI
    Details
    Publication Date: 2005-11-30
    Description: Space shuttle design verification requires dynamic data from full scale structural component and assembly tests. Wind tunnel and other scaled model tests are also required early in the development program to support the analytical models used in design verification. Presented is a design philosophy based on mathematical modeling of the structural system strongly supported by a comprehensive test program; some of the types of required tests are outlined.
    Keywords: SPACE VEHICLES
    Type: NASA Space Shuttle Technol. Conf.; p 231-265
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 23
    facet.materialart.
    Unknown
    Neuter docking mechanism study (1972)
    In:  CASI
    Details
    Publication Date: 2005-11-30
    Description: Neuter (or androgynous) docking systems that allow space vehicles with similar or identical docking hardware to dock are discussed. Basic requirements applicable to docking mechanism design, four neuter concepts that were studied, and the concept selected by the NASA Manned Spacecraft Center for detailed investigation are presented.
    Keywords: SPACE VEHICLES
    Type: 6th Aerospace Mech. Symp.; p 43-49
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 24
    facet.materialart.
    Unknown
    Aerodynamic studies of delta-wing shuttle orbiters. Part 1: Low speed (1972)
    In:  CASI
    Details
    Publication Date: 2005-11-30
    Description: Numerous wind tunnel tests conducted on the evolving delta-wing orbiters have generated a fairly large aerodynamic data base over the entire entry operation range of these vehicles. A limited assessment is made of some of the aerodynamics of the current HO type orbiters, and several specific problem areas selected from the broad data base are discussed. These include, from a subsonic viewpoint, discussions of trim drag effect; effects of the installation of main rocket engine nozzles, OMS and RCS packages, Reynolds number effects, lateral-directional stability characteristics, and landing characteristics.
    Keywords: SPACE VEHICLES
    Type: Space Shuttle Aerothermodyn. Technol. Conf., vol. 3; p 785-802
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 25
    facet.materialart.
    Unknown
    Wing optimization for space shuttle orbiter vehicles (1972)
    In:  CASI
    Details
    Publication Date: 2005-11-30
    Description: The results were presented of a parametric study performed to determine the optimum wing geometry for a proposed space shuttle orbiter. The results of the study establish the minimum weight wing for a series of wing-fuselage combinations subject to constraints on aerodynamic heating, wing trailing edge sweep, and wing over-hang. The study consists of a generalized design evaluation which has the flexibility of arbitrarily varying those wing parameters which influence the vehicle system design and its performance. The study is structured to allow inputs of aerodynamic, weight, aerothermal, structural and material data in a general form so that the influence of these parameters on the design optimization process can be isolated and identified. This procedure displays the sensitivity of the system design of variations in wing geometry. The parameters of interest are varied in a prescribed fashion on a selected fuselage and the effect on the total vehicle weight is determined. The primary variables investigated are: wing loading, aspect ratio, leading edge sweep, thickness ratio, and taper ratio.
    Keywords: SPACE VEHICLES
    Type: NASA. Langley Res. Center Space Shuttle Aerothermodyn. Technol. Conf., vol. 3; p 831-860
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 26
    facet.materialart.
    Unknown
    Status of Langley studies of aerodynamics and interference effects of tandem launch vehicles (1972)
    In:  CASI
    Details
    Publication Date: 2005-11-30
    Description: Some of the aerodynamic and interference effects measured from wind-tunnel tests of three fully reusable space shuttle configurations at transonic and low-supersonic speeds are presented, and the status is given of an assessment of the analytical approach to date. The three configurations tested were a low-fineness-ratio booster combined in tandem with a delta-wing orbiter, designated the "low-fineness-ratio configuration,' and a phase B shuttle configuration consisting of the delta-wing orbiter and high-fineness-ratio booster, designated the "stage-arrangement configuration,' arranged in tandem and in parallel. The force measurements obtained at a Mach number of 1.5 for the low-fineness-ratio configuration were representative of the transonic and low-supersonic speed ranges where the interference effects are predominant and were used for comparison with values calculated at the same Mach number. This comparison is the basis for a preliminary assessment of the initial application of the analytical approach.
    Keywords: SPACE VEHICLES
    Type: Space Shuttle Aerothermodyn. Technol. Conf., vol. 3; p 707-736
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 27
    facet.materialart.
    Unknown
    Some contamination problems in the European TD satellite (1972)
    In:  CASI
    Details
    Publication Date: 2009-11-16
    Description: Materials were selected for the European TD satellite with a view to avoiding contamination of its stellar ultraviolet telescopes. Materiels were selected using the micro-VCM technique, and some typical cases of materials evaluation are described. The cleanliness of the satellite was monitored during integration and test phases, and in particular during long duration thermal vacuum tests.
    Keywords: SPACE VEHICLES
    Type: NASA. Goddard Space Flight Center Space Simulation; p 613-627
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 28
    facet.materialart.
    Unknown
    Spectral composition of a measuring signal during measurements of vibration rates of a moving body (1973)
    In:  CASI
    Details
    Publication Date: 2006-03-28
    Description: Cybernetics diagnostics of machines and mechanisms using the spectral approach is discussed. The problem of establishing the accuracy of determination of the spectral composition is investigated. In systems with rectilinear or rotary movement, the vibrations appear in the form of movement rate vibrations, which are equivalent to frequency modulation of the signal, in proportion to the mean movement rate of the body. The case of a harmonic signal which reproduces and analyzes the characteristics of the frequency modulated signal is discussed. Mathematical models are developed to show the relationships of the parameters.
    Keywords: STRUCTURAL MECHANICS
    Type: Cybernetic Diagnostics of Mech. Systems with Vibro-acoustic Phenomena (NASA-TT-F-14899); p 275-278
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 29
    facet.materialart.
    Unknown
    Certain characteristics and capture regions of nonlinear vibrating systems (1973)
    In:  CASI
    Details
    Publication Date: 2006-03-28
    Description: Free vibrations of a system and vibrations which are multiples of them in frequency are discussed. The corresponding periodic forced vibrations of the type n/m (n is the number of periods of disturbance between periods of movement and m is the number of periods of movement in one period of disturbance), generated by a harmonic or close to harmonic disturbance, are propagated close to the corresponding curves of the free vibrations and their frequency multiples. It has been proposed that investigation of transitional modes of motion and capture regions be carried out by precise methods in phase space, with the least number of coordinates. Thus, for example, for nonautonomous second order equations (for example, the Duffing equations), in place of three variables (coordinates, velocity, phases), it is proposed to use two: velocity during transition of the coordinate through zero and phase.
    Keywords: STRUCTURAL MECHANICS
    Type: Cybernetic Diagnostics of Mech. Systems with Vibro-acoustic Phenomena (NASA-TT-F-14899); p 256-259
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 30
    facet.materialart.
    Unknown
    Transitional modes of motion and capture regions of vibroshock systems (1973)
    In:  CASI
    Details
    Publication Date: 2006-03-28
    Description: A numerical analysis of the transitional modes of motion for a vibroshock system was conducted. The capture regions of the system are emphasized. The three initial parameters for a nonautonomous vibroshock system with one degree of freedom are identified as: (1) coordinates, (2) velocity, and (3) time. Mathematical models are developed to show the relationship of the parameters. Graphs are included to show the nature of the capture regions and to portray the trajectory of motion of mass with time, by solution of differential equations during increase and decrease in time.
    Keywords: STRUCTURAL MECHANICS
    Type: Cybernetic Diagnostics of Mech. Systems with Vibro-acoustic Phenomena (NASA-TT-F-14899); p 250-255
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 31
    facet.materialart.
    Unknown
    The relationship of transient vibrational processes at a point in a plate to the nature of sudden kinematic disturbances (1973)
    In:  CASI
    Details
    Publication Date: 2006-03-28
    Description: A solution is given to the problem of a transient vibration process in a fastened plate, during a sudden displacement of the edge. Some partial cases of excitation are examined in which the packing can be calculated and the explicit type of change in a deformation over time can be found. Some examples are presented.
    Keywords: STRUCTURAL MECHANICS
    Type: Cybernetic Diagnostics of Mech. Systems with Vibro-acoustic Phenomena (NASA-TT-F-14899); p 204-207
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 32
    facet.materialart.
    Unknown
    Structural analysis of vibroacoustical processes (1973)
    In:  CASI
    Details
    Publication Date: 2006-03-28
    Description: The method of automatic identification of acoustical signals, by means of the segmentation was used to investigate noises and vibrations in machines and mechanisms, for cybernetic diagnostics. The structural analysis consists of presentation of a noise or vibroacoustical signal as a sequence of segments, determined by the time quantization, in which each segment is characterized by specific spectral characteristics. The structural spectrum is plotted as a histogram of the segments, also as a relation of the probability density of appearance of a segment to the segment type. It is assumed that the conditions of ergodic processes are maintained.
    Keywords: STRUCTURAL MECHANICS
    Type: Cybernetic Diagnostics of Mech. Systems with Vibro-acoustic Phenomena (NASA-TT-F-14899); p 179-180
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 33
    facet.materialart.
    Unknown
    Use of the dispersion ratio in estimating the nonlinear properties of an object of diagnosis (1973)
    In:  CASI
    Details
    Publication Date: 2006-03-28
    Description: An experimental investigation for estimating the nonlinearity of a diagnostic object was carried out on a single-stage, spur gear reducer. The linearity of the properties of spur gearing (including the linearity of its mode of operation) was tested. Torsional vibrations of the driven wheel and transverse (to the meshing plane) vibrations of the drive wheel on its support were taken as the two outputs of the object to be analyzed. The results of the investigation showed that the degree of nonlinearity of a reducing gear is essentially connected with its operating mode, so that different mathematical models of it can correspond to different values of the system parameters.
    Keywords: STRUCTURAL MECHANICS
    Type: Cybernetic Diagnostics of Mech. Systems with Vibro-acoustic Phenomena (NASA-TT-F-14899); p 157-159
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 34
    facet.materialart.
    Unknown
    Part 1: The stability of equilibrium shapes of elastic systems (1973)
    In:  CASI
    Details
    Publication Date: 2006-03-01
    Description: The stability of equilibrium shapes of elastic systems is examined. Stability loss in the case of similar equilibrium shapes, the disappearance of stable equilibrium shapes, and the disappearance of any forms of equilibrium are discussed. The error made by Euler in analyzing stability loss is pointed out, and Mises' truss is used as an example of stability loss in the case of similar equilibrium shapes.
    Keywords: STRUCTURAL MECHANICS
    Type: Stability and Oscillation of Elastic Systems: Mod. Concepts, Paradoxes and Errors (NASA-TT-F-751); p 1-183
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 35
    facet.materialart.
    Unknown
    Part 2: Oscillations of elastic systems (1973)
    In:  CASI
    Details
    Publication Date: 2006-03-01
    Description: Problems of oscillations of linear systems are discussed, including systems with a fractional number of degrees of freedom as well as free oscillations of a cantilever in the field of centrifugal forces. Four methods of solving the problem of the action of periodic instantaneous impulses are presented. The Tacoma catastrophe is analyzed and used as an example of aeroelastic oscillations. Problems of nonlinear system oscillations include the vibration maintenance of rotation, the Sommerfeld effect, and self-oscillations of a quasi-system with dry friction.
    Keywords: STRUCTURAL MECHANICS
    Type: Stability and Oscillation of Elastic Systems: Mod. Concepts, Paradoxes and Errors NASA-TT-F-751); p 184-418
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 36
    facet.materialart.
    Unknown
    Identification of an object by input and output spectral characteristics (1973)
    In:  CASI
    Details
    Publication Date: 2006-03-28
    Description: The problem is discussed of identification of a linear object of known structure, the movement of which is described by a system of differential equations of the type y = Ay + Bu, where y is an n-dimensional output vector, u is an m-dimensional vector of stationary, random disturbances (inputs), A and B are matrices of unknown parameters of the dimension, n x n and n x m, respectively. The spectral and reciprocal spectral densities of the inputs and outputs are used as the initial information on the object.
    Keywords: STRUCTURAL MECHANICS
    Type: Cybernetic Diagnostics of Mech. Systems with Vibro-acoustic Phenomena (NASA-TT-F-14899); p 139-141
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 37
    facet.materialart.
    Unknown
    Investigation of vibrations of working elements of a two coordinate scanner (1973)
    In:  CASI
    Details
    Publication Date: 2006-03-28
    Description: Radial and axial vibration measurements on the scanning disk and the data storage board of an optical-mechanical scanner are evaluated. Statistical processing of the observational data establishes the excitation source and determines the effect of disk torsional vibrations on the data storage board.
    Keywords: STRUCTURAL MECHANICS
    Type: Cybernetic Diagnostics of Mech. Systems with Vibro-acoustic Phenomena (NASA-TT-F-14899); p 105-106
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 38
    facet.materialart.
    Unknown
    Diagnostics of load vibrations at the inlet of a mechanism (1973)
    In:  CASI
    Details
    Publication Date: 2006-03-28
    Description: The torque of a drive shaft in a magnetic recording device was studied by oscillographic recordings. Statistical evaluation of the dynamic spectral densities showed that the principle source of disturbing forces is loading in the drive shaft radial play.
    Keywords: STRUCTURAL MECHANICS
    Type: Cybernetic Diagnostics of Mech. Systems with Vibro-acoustic Phenomena (NASA-TT-F-14899); p 103-104
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 39
    facet.materialart.
    Unknown
    Analysis of vibration characteristics of thin plates covered with a thin viscous layer (1973)
    In:  CASI
    Details
    Publication Date: 2006-03-28
    Description: The equation of motion was used to examine the problem of vibrations of a thin elastic plate covered with a thin viscous layer. Mathematical formulation and the solution of the problem are given.
    Keywords: STRUCTURAL MECHANICS
    Type: Cybernetic Diagnostics of Mech. Systems with Vibro-acoustic Phenomena (NASA-TT-F-14899); p 89-90
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 40
    facet.materialart.
    Unknown
    Experimental estimation of the statistical parameters of vibrations of a shell (using a digital computer), 2 (1973)
    In:  CASI
    Details
    Publication Date: 2006-03-28
    Description: The statistical characteristics of complex variation amplitudes of shells excited by harmonic force sources in the sound frequency range are examined. Vibrations were measured with a multichannel unit, permitting the component values of a complex vibration amplitude for the i-th measurement point to be obtained at each measured point. An estimation was also made of the nature of the vibration field structure.
    Keywords: STRUCTURAL MECHANICS
    Type: Cybernetic Diagnostics of Mech. Systems with Vibro-acoustic Phenomena (NASA-TT-F-14899); p 68-73
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 41
    facet.materialart.
    Unknown
    Automation of measurement of spatial damping parameters (1973)
    In:  CASI
    Details
    Publication Date: 2006-03-28
    Description: A traveling wave unit was built to process measurement data on spatial damping parameters and to simplify statistical treatment of the results. Mean values of the loss coefficient, lengths of flexual waves, and wave propagation velocities for a given set of discrete functions were determined. Results are given in a table.
    Keywords: STRUCTURAL MECHANICS
    Type: Cybernetic Diagnostics of Mech. Systems with Vibro-acoustic Phenomena (NASA-TT-F-14899); p 81-82
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 42
    facet.materialart.
    Unknown
    A mathematical modeling method for determination of local vibroacoustic characteristics of structures (1973)
    In:  CASI
    Details
    Publication Date: 2006-03-28
    Description: A method is proposed for determining vibroacoustic characteristics from the results of measurements of the distribution of vibrational energy in a structure. The method is based on an energy model of a structure studied earlier. Equations are written to describe the distribution of vibrational energy in a hypothetical diffuse energy state in structural elements.
    Keywords: STRUCTURAL MECHANICS
    Type: Cybernetic Diagnostics of Mech. Systems with Vibro-acoustic Phenomena (NASA-TT-F-14899); p 74-77
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 43
    facet.materialart.
    Unknown
    Experimental estimation of the statistical parameters of vibrations of a shell (using a digital computer), 1 (1973)
    In:  CASI
    Details
    Publication Date: 2006-03-28
    Description: The distribution pattern of the amplitudes of vibrations, measured at various points on the surface of a shell, stimulated by a point source of harmonic force in the sound frequency range was studied experimentally. This pattern permits a valid spacing estimate to be carried out of the average structural characteristics of the vibrations, which are used for both estimation of the vibration excitability of the structure and for estimation of the effectiveness of use of a vibration-absorbing covering.
    Keywords: STRUCTURAL MECHANICS
    Type: Cybernetic Diagnostics of Mech. Systems with Vibro-acoustic Phenomena (NASA-TT-F-14899); p 61-67
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 44
    facet.materialart.
    Unknown
    Statistical parameters of reverberating fields, calculated by computer (1973)
    In:  CASI
    Details
    Publication Date: 2006-03-28
    Description: A method, developed for making measurements in reverberation chambers in the steady state mode, is reported. Spatial distribution patterns of the square of the sound pressure vs type of exciting signal were produced theoretically and checked experimentally in a reverberation chamber. Results of measurements of spatial irregularities of the field with pure tones and with noise bands in the 200 to 2,000 Hz frequency range were used for calculating statistical parameters of the reverbation fields by computer. The calculation program included determination of density probability function, integral distribution pattern, mathematical expectation, normalized dispersion of the mean square of the pressure.
    Keywords: STRUCTURAL MECHANICS
    Type: Cybernetic Diagnostics of Mech. Systems with Vibro-acoustic Phenomena (NASA-TT-F-14899); p 57-60
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 45
    facet.materialart.
    Unknown
    Investigation of vibrations in electric power transmission lines (1973)
    In:  CASI
    Details
    Publication Date: 2006-03-28
    Description: Research was begun into the dynamic characteristics of wires, including the self-damping properties. A series of wire insulator fastenings, with and without dampers, was also developed.
    Keywords: STRUCTURAL MECHANICS
    Type: Cybernetic Diagnostics of Mech. Systems with Vibro-acoustic Phenomena (NASA-TT-F-14899); p 48-49
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 46
    facet.materialart.
    Unknown
    Analytic description of vibrations in a piping system with pulsating flow (1973)
    In:  CASI
    Details
    Publication Date: 2006-03-28
    Description: Various calculation schemes were proposed for describing vibrations in a piping system with pulsating flow. Methods were selected and applied according to the type of irregularities examined: concentrated ones, extended ones, or complex ones. The selection of a method also depends on comparability of the extent of the irregularities with the pressure wavelength and velocity in the flow. Relations were found which permit a description of the interaction of a pulsating flow with any irregularity in the system. For complex systems with varying temperatures and some irregularities, relations were obtained, which reflect the varying phase displacement of the forces in these irregularities. The effect of the frictional torque on pipeline supports, in the presence of flexural and torsional vibrations was investigated, on the assumption that the frictional torque depends linearly on the angular velocity.
    Keywords: STRUCTURAL MECHANICS
    Type: Cybernetic Diagnostics of Mech. Systems with Vibro-acoustic Phenomena (NASA-TT-F-14899); p 51-52
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 47
    facet.materialart.
    Unknown
    Investigation of the reactions of skin panels in relation to duration of acoustical loading (1973)
    In:  CASI
    Details
    Publication Date: 2006-03-28
    Description: Certain characteristics of the reactions of typical skin panels of a passenger aircraft to acoustical loading are being investigated, for development of an objective method of diagnostics for skin condition, under the operations and maintenance sections of civil aviation. There are a number of difficulties connected with the solution of this problem. The reactions of skin panels exposed to the noises of the exhaust jets are dependent on the aircraft operating conditions, the geometric parameters and limiting conditions of the panels.
    Keywords: STRUCTURAL MECHANICS
    Type: Cybernetic Diagnostics of Mech. Systems with Vibro-acoustic Phenomena (NASA-TT-F-14899); p 41-43
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 48
    facet.materialart.
    Unknown
    The use of a digital computer for calculation of acoustic fields of complex vibrating structures by the reciprocity principle (1973)
    In:  CASI
    Details
    Publication Date: 2006-03-28
    Description: A program was compiled for calculating acoustical pressure levels, which might be created by vibrations of complex structures (an assembly of shells and rods), under the influence of a given force, for cases when these fields cannot be measured directly. The acoustical field is determined according to transition frequency and pulse characteristics of the structure in the projection mode. Projection characteristics are equal to the reception characteristics, for vibrating systems in which the reciprocity principle holds true. Characteristics in the receiving mode are calculated on the basis of experimental data on a point pulse space velocity source (input signal) and vibration response of the structure (output signal). The space velocity of a pulse source, set at a point in space r, where it is necessary to calculate the sound field of the structure p(r,t), is determined by measurements of acoustic pressure, created by a point source at a distance R. The vibration response is measured at the point where the forces F and f exciting the system should act.
    Keywords: STRUCTURAL MECHANICS
    Type: Cybernetic Diagnostics of Mech. Systems with Vibro-acoustic Phenomena (NASA-TT-F-14899); p 53-56
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 49
    facet.materialart.
    Unknown
    Compensation of vibrations of a unidimensional structure and a plane acoustical field (1973)
    In:  CASI
    Details
    Publication Date: 2006-03-28
    Description: Endless structures are realized in practice, in the presence of loss and to an adequate extent, owing to which, reflections from the edges to the center part of the structure can be disregarded. In the absence of losses, reflections from the boundary frequently have to be taken into account. In this case, besides compensation for waves passing through the boundary, the reciprocal connection system can be used for compensation of the total field ahead of the boundary. In these cases, the system converters can be located in a different manner relative to the boundary and to one another. Each of the locations has inherent peculiarities, which must be taken into account in solving specific problems.
    Keywords: STRUCTURAL MECHANICS
    Type: Cybernetic Diagnostics of Mech. Systems with Vibro-acoustic Phenomena (NASA-TT-F-14899); p 222-228
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 50
    facet.materialart.
    Unknown
    Active damping of unidimensional structures (1973)
    In:  CASI
    Details
    Publication Date: 2006-03-28
    Description: The vibration characteristics of an unidimensional structure are discussed. The cases considered are: (1) a rigid pipe in which a wave propagates, (2) an infinite string along which a transverse wave propagates, (3) a rod along which longitudinal or torsional columns propagate, and (4) generally a unidimensional propagation of some one mode of vibrations which is nondegenerating with distance. Mathematical models are developed to show the performance of the mechanical devices under various damping conditions.
    Keywords: STRUCTURAL MECHANICS
    Type: Cybernetic Diagnostics of Mech. Systems with Vibro-acoustic Phenomena (NASA-TT-F-14899); p 216-221
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 51
    facet.materialart.
    Unknown
    Statistical distribution of spacecraft maximum structural response. (1972)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Under nonstationary random excitations resulting from booster engine shutdown, a direct statistical analysis of spacecraft maximum response is performed, and the spacecraft structural reliability is obtained. It is found that the Gumbel (1958) Type I asymptotic distribution of maximum values provides a reasonably good statistical model for spacecraft maximum responses. This approach makes it possible to perform the reliability-based optimum design of spacecraft structures.
    Keywords: SPACE VEHICLES
    Type: Journal of Spacecraft and Rockets; 9; Jan. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 52
    facet.materialart.
    Unknown
    Attitude control of a spinning flexible spacecraft (1973)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The dynamics of rotational motion of a spinning orbiting spacecraft consisting of two rigid bodies connected by a flexible joint and arbitrary number of flexible appendages (two of which are flexible massless booms having masses on their tips) is analyzed. Active attitude control is provided by momentum exchange devices (e.g. control moment gyroscopes) or a mass expulsion system. The linearized equations of motion describing the vehicle are presented, and a large scale digital simulation that has been developed at the Marshall Space Flight Center is presented. A simplified model of the geometrically complex vehicle is selected to make it analytically tractable. The simplified model consists of a single rigid core body with two attached flexible massless booms having tip masses. The states of the vehicle are defined as small perturbations about its steady-state spin. An analysis is performed to determine the domain of stability.
    Keywords: SPACE VEHICLES
    Type: Computer and Electrical Engineering; 1; Dec. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 53
    facet.materialart.
    Unknown
    A variable step incremental procedure (1973)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Description of a variable step incremental procedure for the solution of nonlinear equations in finite element structural analysis. The proposed procedure is effective in improving the accuracy of the basic incremental technique and in providing, in addition, an accurate estimate of the discretization error. The proposed approach is highly appropriate for solving problems for which the user has no a priori estimate of the step size to use.
    Keywords: STRUCTURAL MECHANICS
    Type: International Journal for Numerical Methods in Engineering; 7; 4, 19; 1973
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 54
    facet.materialart.
    Unknown
    Further discrete variable results for a panel flutter optimization problem (1973)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Numerical solutions are presented for the problem of minimum weight design of a thin one-dimensional, simply supported, solid panel in compression, with one side exposed to a parallel high supersonic air flow. The flutter speed is held fixed and a minimum thickness constraint is imposed.
    Keywords: STRUCTURAL MECHANICS
    Type: International Journal for Numerical Methods in Engineering; 7; 4, 19; 1973
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 55
    facet.materialart.
    Unknown
    Thermal design verification testing for the ATS-F and -G spacecraft. (1972)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: There is a wide fluctuation in the internal power dissipation from the components within the earth viewing module (EVM). The electronic component functional reliability required for a two-to-five year mission is the most significant factor for the thermal design criteria. A mathematical thermal model of the EVM and the orbital environment is used to predict the performance of the thermal control system. Comparisons of the results obtained in chamber thermal balance tests with the data computed on the basis of the theoretical model provide the means for validating the thermal design.
    Keywords: SPACE VEHICLES
    Type: Journal of Environmental Sciences; 15; Mar
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 56
    facet.materialart.
    Unknown
    Finite elements of nonlinear continua. (1972)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The finite element method is extended to a broad class of practical nonlinear problems, treating both theory and applications from a general and unifying point of view. The thermomechanical principles of continuous media and the properties of the finite element method are outlined, and are brought together to produce discrete physical models of nonlinear continua. The mathematical properties of the models are analyzed, and the numerical solution of the equations governing the discrete models is examined. The application of the models to nonlinear problems in finite elasticity, viscoelasticity, heat conduction, and thermoviscoelasticity is discussed. Other specific topics include the topological properties of finite element models, applications to linear and nonlinear boundary value problems, convergence, continuum thermodynamics, finite elasticity, solutions to nonlinear partial differential equations, and discrete models of the nonlinear thermomechanical behavior of dissipative media.
    Keywords: STRUCTURAL MECHANICS
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 57
    facet.materialart.
    Unknown
    Dynamic response analysis of geometrically non-linear structures subjected to high impact. (1972)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Description of an efficient digital computer method for the determination of the propagation of elastic stresses and deformations in certain geometrically nonlinear structures subjected to high impact loading. The finite-element matrix displacement approach utilizing curved quadrilateral shell elements in conjunction with a nodewise predictor-corrector method employing Runge-Kutta extrapolation techniques has been adopted for the present solution. The related computer program written in FORTRAN V for the UNIVAC 1108 computer has proved to be effective for the solution of a range of practical problems including rectangular and cylindrical panels. Numerical results are presented for a relevant structure, the cell container, and the negative electrode of an impact-resistant battery subjected to high impact, simulating its free landing on a planetary surface.
    Keywords: STRUCTURAL MECHANICS
    Type: International Journal for Numerical Methods in Engineering; 4; Mar
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 58
    facet.materialart.
    Unknown
    The space shuttle and its uses. (1972)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The development of reusable space-shuttle vehicles has been made practical by the availability of improved staged-combustion engines and durable thermal protection systems. A two-state launch configuration with fully reusable booster and orbiter elements is considered to be the best design solution, and size specifications for such a vehicle are examined as a function of launch costs. Significant vehicle characteristics are explained in terms of cargo bay dimensions, cross-range maneuvering capability, mission duration requirements, engine characteristics, and acceleration constraints. Shuttle flight activities include satellite deployment and repair, sortie missions for short-duration research purposes, and space station support operations. Phases of the development program are outlined, and structural details of several candidate space shuttle concepts are illustrated.
    Keywords: SPACE VEHICLES
    Type: Aeronautical Journal; 76; Jan. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 59
    facet.materialart.
    Unknown
    Shuttle ascent guidance and control. (1972)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The requirements of a unified optimal guidance scheme are discussed, giving attention to a general formulation, aspects of self-targeting, problems of optimum guidance within the atmosphere, and a unified concept for all flight phases. Since no previous guidance scheme meets these requirements, the shuttle demands a fundamentally new approach. A new unified optimal guidance scheme, called Mascot, was developed. The capabilities of Mascot include the real-time solution of general trajectory-optimization problems and the unification of guidance for all flight phases.
    Keywords: SPACE VEHICLES
    Type: Astronautics and Aeronautics; 10; Feb. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 60
    facet.materialart.
    Unknown
    Flying automated laboratories to the planets. (1972)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Review of results obtained by instrumented spacecraft in investigation of the planets, mainly Mars. It appears that Mars is a world of varying topographical structure, some of which must have been created by the same processes that sculptured the moon and by others thus far unique in the solar system. The atmosphere is too thin to shield the surface, and there are no traces of liquid water. The very large recent dust storm is discussed. Mariner 9 has revealed definite indication of probable volcanic activity on Mars in recent geologic times.-
    Keywords: SPACE VEHICLES
    Type: Teledyne Ryan Aeronautical Reporter; 33; Spring 1
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 61
    facet.materialart.
    Unknown
    Buckling of nearly cylindrical shells under lateral pressure. (1972)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The effect of slight meridional curvature on the buckling of shells subjected to an external constant directional lateral pressure is examined. A class of nearly cylindrical shells with constant meridional curvature, a central radius-to-thickness ratio of 500, and central rise-to-shell-length ratios varying from plus 5% to minus 5% is considered. A brief study is presented of the dependence of the critical lateral pressure on the meridional curvature and on the length and meridional edge restraint.
    Keywords: STRUCTURAL MECHANICS
    Type: AIAA Journal; 10; Feb. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 62
    facet.materialart.
    Unknown
    Effect of a slot on the buckling load of a cylindrical shell with a circular cutout. (1972)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The results are discussed of a study of the effect of slots on the buckling of cylinders with circular holes of systematically varied circularity. The results obtained suggest that the substantial increase in the buckling loads of cylindrical shells resulting from increases in slot length is due to a relief of the bending stress field.
    Keywords: STRUCTURAL MECHANICS
    Type: AIAA Journal; 10; Feb. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 63
    facet.materialart.
    Unknown
    Experimental investigation of strains in fabric under biaxial and shear forces. (1972)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The paper defines the experimental phase of an objective to obtain the mechanical characteristics and coefficients required by the generalized form of Hooke's law for nylon-polyurethane-coated fabric. Test specimens were cylindrical fabric sleeves and were loaded in axial tension by an Instron, in hoop tension by pressurizing, and in shear by a torquing fixture. An extensive amount of strain data is included for a wide combination of the three membrane loads. The tests indicate highly nonlinear stress-strain characteristics of the fabric and a strong dependency on all three membrane loads.
    Keywords: STRUCTURAL MECHANICS
    Type: Journal of Aircraft; 9; Jan. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 64
    facet.materialart.
    Unknown
    Skylab status report. (1972)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The laboratory will be launched on Apr. 30, 1973, aboard a Saturn V vehicle. Approximately twenty-three and a half hours later the first crew will be launched in a command and service module aboard a Saturn IB launch vehicle. The laboratory will consist of modules. The orbital workshop (OWS) is made from the liquid oxygen and liquid hydrogen tanks of a Saturn S-IVB third stage. The OWS contains the living quarters and two experiments areas. The airlock sits on top of the OWS and contains the controls and hatch for the extra-vehicular activity.
    Keywords: SPACE VEHICLES
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 65
    facet.materialart.
    Unknown
    Small-scale wind shear definition for aerospace vehicle design. (1972)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Rawinsonde wind profile data provide adequate wind shear information for vertical height intervals greater than 1 km. To specify wind shears for intervals below 1 km for space vehicle design, detailed wind-profile information like that provided by the FPS-16 Radar/Jimsphere system or an extrapolation procedure is required. This paper is concerned with the latter alternative. It is assumed that any realization from an ensemble of wind profiles can be represented in terms of a Fourier integral. This permits the calculation of the ensemble standard deviation and mean of the corresponding shear ensemble for any altitude and shear interval in terms of the power spectrum of the ensemble of wind profiles. The results of these calculations show that the mean and standard deviation of the wind shear ensemble, as well as the wind shear for any percentile, asymptotically behave like the vertical interval to the 0.7 power. This result is in excellent agreement with shear data from Cape Kennedy, Fla.
    Keywords: SPACE VEHICLES
    Type: Journal of Spacecraft and Rockets; 9; Feb. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 66
    facet.materialart.
    Unknown
    Sonic-boom-induced building structure responses including damage. (1972)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Concepts of sonic-boom pressure loading of building structures and the associated responses are reviewed, and results of pertinent theoretical and experimental research programs are summarized. The significance of sonic-boom load time histories, including waveshape effects, are illustrated with the aid of simple structural elements such as beams and plates. Also included are discussions of the significance of such other phenomena as three-dimensional loading effects, air cavity coupling, multimodal responses, and structural nonlinearities. Measured deflection, acceleration, and strain data from laboratory models and full-scale building tests are summarized, and these data are compared, where possible, with predicted values. Damage complaint and claim experience due both to controlled and uncontrolled supersonic flights over communities are summarized with particular reference to residential, commercial, and historic buildings. Sonic-boom-induced building responses are compared with those from other impulsive loadings due to natural and cultural events and from laboratory simulation tests.
    Keywords: STRUCTURAL MECHANICS
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 67
    facet.materialart.
    Unknown
    Shuttle status report. (1972)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The Space Shuttle Program is still in Phase B, a phase consisting predominantly of paper analyses and trade studies leading to the selection of a single design. A brief history of the program up to Phase B is discussed together with the results of the original year-long Phase B effort, and the objectives of the Phase B extension currently in work. A Lockheed study is discussed together with a Grumman/Boeing study, Phase B contractor results, displays and controls, simulations, and the flight test.
    Keywords: SPACE VEHICLES
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 68
    facet.materialart.
    Unknown
    Establishing an upper bound for window response to the sonic boom. (1972)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Study of the failure of glass windows, which is probably the most severe problem confronting the SST program outside of the psychological and sociological aspects. The structural configuration most likely to suffer a window failure due to sonic boom excitation is one representable by a single large room, a single large window, and an open door. It is suggested that if the open door were replaced with another window the resultant stresses in both windows would be substantially reduced.
    Keywords: STRUCTURAL MECHANICS
    Type: Journal of Sound and Vibration; 21; Mar. 22
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 69
    facet.materialart.
    Unknown
    Use of three-dimensional photoelasticity in fracture mechanics (1973)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The philosophy of fracture mechanics is reviewed and utilized to formulate a simplified approach to the determination of the stress-intensity factor photoelastically for three-dimensional problems. The method involves a Taylor Series correction for the maximum in-plane shear stress (TSCM) and does not involve stress separation. The results are illustrated by applying the TSCM to surface flaws in bending fields. Other three-dimensional problems solved by the TSCM are cited.
    Keywords: STRUCTURAL MECHANICS
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 70
    facet.materialart.
    Unknown
    Evaluation of fatigue-crack growth rates by polynomial curve fitting (1973)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Fundamental characterization of the constant-amplitude fatigue crack propagation is achieved by an analysis of the rate of change of crack length with change in number of applied loading cycles, defining the rate values such that they are consistent with the basic assumption of smoothness and continuity in the fatigue crack growth process. The technique used to satisfy the analytical conditions and minimize the effects of local material anomalies and experimental errors is that of fitting a smooth curve to the entire set of basic data by least square regression. This yields a well-behaved function relating the number of cycles to the crack length. By taking the first derivative of the function, the crack growth rate is obtained for each point. The class of curve fitting functions used in the analysis is the polynomial of degree n.
    Keywords: STRUCTURAL MECHANICS
    Type: International Journal of Fracture; 9; Mar. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 71
    facet.materialart.
    Unknown
    An improved numerical process for solution of solid mechanics problems (1973)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: This paper gives an overview of the development and status of an improved numerical process for the solution of solid mechanics problems. The proposed process uses a mixed formulation with the fundamental unknowns consisting of both stress and displacement parameters. The problem is formulated either by means of first-order partial differential equations or in a variational form by using a Hellinger-Reissner-type mixed variational principle. For presentation purposes, the components of a numerical process are characterized and the criteria for an ideal process are outlined. Commonly used finite-difference and finite-element procedures are examined in the light of these criteria and it is shown that they fall short in a number of ways. The proposed numerical process, on the other hand, satisfies most of the optimality criteria and appears to be particularly suited for use with the forthcoming generation computers.
    Keywords: STRUCTURAL MECHANICS
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 72
    facet.materialart.
    Unknown
    A refined analysis of composite laminates (1973)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The purpose of this paper is to develop a sufficiently accurate analysis, which is much simpler than exact three-dimensional analysis, for statics and dynamics of composite laminates. The governing differential equations and boundary conditions are derived by following a variational approach. The displacements are assumed piecewise linear across the thickness and the effects of transverse shear deformations and rotary inertia are included. A procedure for obtaining the general solution of the above governing differential equations in the form of hyperbolic-trigonometric series is given. The accuracy of the present theory is assessed by obtaining results for free vibrations and flexure of simply supported rectangular laminates and comparing them with results from exact three-dimensional analysis.
    Keywords: STRUCTURAL MECHANICS
    Type: Journal of Sound and Vibration; 30; Oct. 22
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 73
    facet.materialart.
    Unknown
    Vibration characteristics of aluminum plates reinforced with boron-epoxy composite material. (1973)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Analytical and experimental data on the vibration characteristics of cantilevered winglike flat trapezoidal aluminum plates are presented. The plates had been reinforced with boron-epoxy composite material which had been placed symmetrically about the plate middle surface. The effect of filament orientation on the mode shapes and frequencies of the first ten modes and on the damping coefficients of several of the lowest frequency modes has been investigated experimentally. Experimental data are compared with results from a finite-element analysis. Stiffness properties of the composite material for use in the analysis were determined from vibration tests of composite reinforced aluminum beams.
    Keywords: STRUCTURAL MECHANICS
    Type: Journal of Composite Materials; 7; July 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 74
    facet.materialart.
    Unknown
    Fracture analysis of surface- and through-cracked sheets and plates. (1973)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The Neuber stress-concentration relation for notches in an elastic-plastic material subjected to shear loading was generalized for a crack in a finite plate subjected to tensile loading. An equation was derived which related the linear elastic stress-intensity factor, the applied stress, and two material parameters. The equation was then used as a two-parameter fracture criterion for surface- and through-cracked specimens. Fracture data from the literature on surface- and through-cracked sheet and plate specimens of steel, titanium alloy, titanium weldment, and aluminum alloy tested at room and cryogenic temperature were analyzed according to the proposed equation. For surface cracks, wide ranges of crack-depth to crack-length ratio and crack-depth to specimen-thickness ratio were considered. For through cracks, wide ranges of crack length and specimen width were also considered.-
    Keywords: STRUCTURAL MECHANICS
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 75
    facet.materialart.
    Unknown
    The elastic layer with a cylindrical hole subjected to a nonuniform axisymmetric radial displacement. (1973)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: A problem in the linear theory of elasticity is considered wherein a layer with a circular cylindrical hole is subjected to a nonuniform axisymmetric radial displacement. The solution utilizes Navier's equations of elasticity which are solved by means of extended Hankel transforms. A special case in which the radial displacement is a linear function of the axial coordinate is presented. Numerical results are given in graphical form for the case when hole radius and layer thickness are equal. The inversion integrals were evaluated numerically using Longman's technique for computing infinite integrals of oscillatory functions.
    Keywords: STRUCTURAL MECHANICS
    Type: Acta Mechanica; 17; 1-2,; 1973
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 76
    facet.materialart.
    Unknown
    SSS-A spacecraft and experiment description. (1973)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The scientific objectives of the Explorer-45 mission are discussed. The primary objective is the study of the ring current responsible for the main phase of magnetic storms. Closely associated with this objective is the determination of the relationship between magnetic storms, substorms, and the acceleration of charged particles in the magnetosphere. Further objectives are the measurement of a wide range of proton, electron and alpha-particle energies, and studies of wave-particle interactions responsible for particle transport and loss in the inner magnetosphere. The orbital parameters, the spacecraft itself, and some of its unique features, such as the data handling system, which is programmable from the ground, are described.
    Keywords: SPACE VEHICLES
    Type: Journal of Geophysical Research; 78; Aug. 1
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 77
    facet.materialart.
    Unknown
    A simple method for studying slow crack growth. (1973)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: A simple, inexpensive method for studying slow crack growth is described. The method entails measurements of load relaxation at constant displacement using a double torsion specimen. It is demonstrated that the data generated using this technique are in excellent agreement with data obtained using the more complex conventional techniques, for a range of materials - steel, titanium, glass, aluminum oxide, PMMA. These encouraging initial results suggest that additional and more detailed studies using this test procedure are merited.
    Keywords: STRUCTURAL MECHANICS
    Type: Journal of Testing and Evaluation; 1; July 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 78
    facet.materialart.
    Unknown
    Structural optimization by methods of feasible directions. (1973)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: A general design algorithm based on methods of feasible directions is presented. Zoutendijk's method of feasible directions is first presented as applied to structural design. This method is modified to improve numerical stability of the design process and is then further modified to deal efficiently with infeasible designs. The algorithm requires the analytic gradient of the objective function and the constraint functions which are active at a given stage in the design process. Gradient information is not required for nonactive constraints. Complex constraint functions may be ignored in the initial design stages because violation of these constraints is efficiently overcome later in the design process. The algorithm is demonstrated with elastic design of redundant trusses.
    Keywords: STRUCTURAL MECHANICS
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 79
    facet.materialart.
    Unknown
    Computer based analyses of the response of box type structures to random pressures. (1973)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Analysis of the vibration of the internal structure of a relatively simple flight vehicle structural model consisting of a multicellular box in which two parallel outer face plates (skins) are connected together by several internal plates (ribs) which are parallel to each other and normal to the face plates. Such a box is representative of a wing or stabilizer structure. Three representations of the structure were considered in the computation. The simplest model which can account for the coupling between the face plates and the ribs is a two-dimensional assembly of beams. A more realistic, yet still simple, three-dimensional model has been developed using the Rayleigh-Ritz method. The third computational method employed was the NASTRAN finite-element displacement method. The computational results are compared with experimental data.
    Keywords: STRUCTURAL MECHANICS
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 80
    facet.materialart.
    Unknown
    Mach number and Reynolds number effect on orbiter/tank interference heating. (1973)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Analysis of the variations in orbiter/tank interference heating rates in the Space Shuttle configuration at M numbers up to 19 and Re numbers down to 250,000. Experimental data on heat transfer rate distribution in the tank and on orbiter-induced interference heat transfer factors in the tank are included in diagrams. The data suggest that the primary effect of interference can be a fully developed turbulent boundary layer.
    Keywords: SPACE VEHICLES
    Type: Journal of Spacecraft and Rockets; 10; Aug. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 81
    facet.materialart.
    Unknown
    Developing structures technology for the day after tomorrow. (1973)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: To prepare for new demands on aircraft structures, NASA has established a number of goals. These include automatic analysis and design, building confidence in advanced composites, improving the technology base for future supersonic and hypersonic vehicles, validating concepts for active controls, developing methods for predicting aircraft loads and aeroelasticity, and generating design methods for assuring structural integrity. Progress made in achieving these goals is discussed in detail.
    Keywords: STRUCTURAL MECHANICS
    Type: Astronautics and Aeronautics; 11; July 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 82
    facet.materialart.
    Unknown
    Fuel-optimal angular momentum vector control for spinning and dual-spin spacecraft. (1973)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The problem of fuel-optimal small-angle reorientation of the spin axis of a spinning or dual-spin spacecraft is examined. The results obtained show significant improvements over previously published optimization studies by virtue of the introduction of two innovations: (1) mass-explusion active control is utilized for angular momentum vector pointing only, with passive damping relied upon for stable vehicles to attenuate vehicle coning about the angular momentum vector, so that the task of the active controller changes from spin axis control to angular momentum vector control, and (2) several options are considered for type, number, and location of attitude control jets. The first of these considerations introduces a target set which is a smooth, two-dimensional linear manifold in the four-dimensional state space, whereas previous studies have adopted the origin as the target set. The second innovation amounts to consideration of a spectrum of control restraint sets.
    Keywords: SPACE VEHICLES
    Type: Astronautica Acta; 18; June 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 83
    facet.materialart.
    Unknown
    Lowest critical velocity of rotating shafts. (1973)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The effect of the gyroscopic moment on the appearance of a first imaginary critical velocity (minimum negative value of lambda) is investigated and shown to have an important effect on the computation of the first critical velocity. A numerical procedure is developed which can be used for overcoming the difficulties arising when the first real and the first imaginary roots are similar in modulus. As an example, a real shaft with two supports was analyzed. For the computation the real shaft was subdivided into ten sections, and for two of them (representing compressor and turbine) the gyroscopic moment was taken into account. The present method is especially useful when high speed computational facilities are not available.
    Keywords: STRUCTURAL MECHANICS
    Type: AIAA Journal; 11; June 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 84
    facet.materialart.
    Unknown
    Lower payload costs through refurbishment and module replacement. (1973)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Payload benefits to be derived from refurbishment can be related to individual spacecraft programs directly and for planning purposes to the entire shuttle mission model. In the case of the large space telescope program, cost savings obtained through the use of the shuttle for maintenance operations have been estimated to be in the range from 30 to 40%. This saving is realized over an operational lifetime of 15 years by reducing, through refurbishment on orbit, the number of flight units along with 'optimized' reliability goals commensurate with periodic maintenance revisits at one-year intervals. Shuttle-era payload implications are discussed together with a pressurized on-orbit maintenance configuration, an earth observation satellite, and some typical teleoperator-serviced spacecraft.
    Keywords: SPACE VEHICLES
    Type: Astronautics and Aeronautics; 11; May 1973
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 85
    facet.materialart.
    Unknown
    Effect of out-of-planeness of membrane quadrilateral finite elements. (1973)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Investigation of the effect of using plane quadrilateral membrane elements for modeling nonplanar structures. The effect is assessed by analyzing a simplified finite element model with the aid of the structure network analysis program. The results obtained indicate that the use of planar quadrilateral membrane elements for modeling bending problems can lead to large errors if the four points that define the quadrilateral are not in the same plane.
    Keywords: STRUCTURAL MECHANICS
    Type: AIAA Journal; 11; May 1973
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 86
    facet.materialart.
    Unknown
    The cylindrical electrostatic probes for Atmosphere Explorer -C, -D, and -E. (1973)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: This paper briefly describes the cylindrical electrostatic probes to be used on the new Atmosphere Explorer-C, -D, and -E, and outlines the methods to be employed to analyze the experimental data in terms of electron temperature and ion and electron concentration. Two independent cylindrical sensors and partially redundant electronic systems permit greater reliability in measurements. Measurements are made at 1-sec and 2-sec intervals along the orbit. The sensors themselves have been modified from previous applications to cope with the lower electron temperature expected in these low-altitude orbits and to counter possible surface contamination caused by the hydrazine engines used for orbit adjustments.
    Keywords: SPACE VEHICLES
    Type: Radio Science; 8; Apr. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 87
    facet.materialart.
    Unknown
    A neutral-atmosphere composition experiment for the Atmosphere Explorer-C, -D, and -E. (1973)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The neutral-atmosphere composition experiment instrumentation is designed to obtain in-situ measurements of neutral thermosphere composition from Atmosphere Explorer-C, -D, and -E. The system is based on previously flown OGO-6 and San Marco-3 composition instruments. The mass-spectrometer sensor includes a gold-plated thermalizing chamber and ion source, a hyperbolic rod quadrupole analyzer, and an off-axis electron multiplier. Automatic ion-source sensitivity control and pulse-counting techniques provide density measurement capability from approximately 125 to 1000 km altitude. The normal operating mode includes measurement at all masses in the range of 1 to 44 amu, with emphasis on hydrogen, helium, oxygen, nitrogen, and argon.
    Keywords: SPACE VEHICLES
    Type: Radio Science; 8; Apr. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 88
    facet.materialart.
    Unknown
    Matrix transformations for spacecraft attitude determination. (1972)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Keywords: SPACE VEHICLES
    Type: Planetary and Space Science; 20; Oct. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 89
    facet.materialart.
    Unknown
    Plane elastostatic analysis of V-notched plates. (1972)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Solutions are given for several plane elastostatic problems of plates having a V-notch on one edge, and subjected to a variety of boundary conditions. The effect of the magnitude of the V-notch angle and specimen geometry on stress intensity factors KI and KII are obtained for unloaded notch surfaces. There is less than one per cent difference in opening model stress intensity factor in going from a zero degree notch angle to a 30 degree notch angle. Notch opening displacements at the plate edge were measured experimentally, and the results obtained were in excellent agreement with the computed results.
    Keywords: STRUCTURAL MECHANICS
    Type: International Journal of Fracture Mechanics; 8; Sept
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 90
    facet.materialart.
    Unknown
    Study of fatigue crack initiation from flaws using fracture mechanics theory. (1972)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Keywords: STRUCTURAL MECHANICS
    Type: Engineering Fracture Mechanics; 4; June 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 91
    facet.materialart.
    Unknown
    Panel-flutter analysis of a thermal protection-shield concept for the space shuttle. (1972)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Analysis of the panel flutter characteristics of a candidate thermal protection system (TPS) for the space shuttle, using piston theory aerodynamics and Lagrange equations. The results show the TPS candidate panel array to be deep in the 'no-flutter' region during launch and, therefore, safe from panel flutter.
    Keywords: STRUCTURAL MECHANICS
    Type: AIAA Journal; 10; Aug. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 92
    facet.materialart.
    Unknown
    Rayleigh wave effects in an elastic half-space. (1972)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Consideration of Rayleigh wave effects in a homogeneous isotropic linearly elastic half-space subject to an impulsive uniform disk pressure loading. An approximate formula is obtained for the Rayleigh wave effects. It is shown that the Rayleigh waves near the center of loading arise from the portion of the dilatational and shear waves moving toward the axis, after they originate at the edge of the load disk. A study is made of the vertical displacement due to Rayleigh waves at points on the axis near the surface of the elastic half-space.
    Keywords: STRUCTURAL MECHANICS
    Type: AIAA Journal; 10; Aug. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 93
    facet.materialart.
    Unknown
    Strongly coupled stress waves in heterogeneous plates. (1972)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Consideration of coupled stress waves generated by an impulsive load applied at one end of a semiinfinite plate. For the field equations governing the one-dimensional coupled waves a hyperbolic system of equations is obtained in which a strong coupling in the second derivatives exists. The method of characteristics described by Chou and Mortimer (1967) is extended to cover the case of strong coupling, and a study is made of the transient stress waves in a semiinfinite plate subjected to an initial step input. Coupled discontinuity fronts are found to propagate at different velocities. The normal plate stress and the bending moment at different time regimes are illustrated by graphs.
    Keywords: STRUCTURAL MECHANICS
    Type: AIAA Journal; 10; Aug. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 94
    facet.materialart.
    Unknown
    Orbital propellant depot system. (1972)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Review of some of the problems involved in the design of a long-term propellant storage depot in earth orbit to act as a resupply station for cargo/personnel shuttles between earth orbit and lunar orbit, between low earth orbit and synchronous orbit, and possibly for use with interplanetary probes. The problems discussed pertain essentially to the long-term storage and propellant transfer capabilities.
    Keywords: SPACE VEHICLES
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 95
    facet.materialart.
    Unknown
    A halo-orbit lunar station. (1972)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: A relay satellite following a halo trajectory will always maintain line-of-sight contact with the earth and the moon's far side. The Integrated Program Plan for lunar exploration in the 1980s and beyond calls for a fully reusable earth-moon transportation system. The principal elements of the system are a Translunar Shuttle, a Lunar-Orbit Space Station or Halo-Orbit Space Station, and a Lunar Space Tug. It is shown that a halo-orbit space station could offer important operational and performance advantages compared to a lunar-orbit station in a second-generation lunar program.
    Keywords: SPACE VEHICLES
    Type: Astronautics and Aeronautics; 10; June 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 96
    facet.materialart.
    Unknown
    Self-contamination and environment of an orbiting satellite. (1972)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The flux of molecules emitted by the satellite and subsequently returning to its surface is investigated. The reflection occurs upon collision of these with ambient molecules. The evaluation of this flux is carried out from a knowledge of the outgassing rate of the satellite, its dimensions, and the orbit parameters. Condensation rates and adsorption layers on critical surfaces are calculated from the knowledge of this flux, and from the natures and temperatures of the gas and the surface. The calculation of these parameters, based on estimated and in some cases measured emission rates, has been carried out for a number of satellites. These developed relationships and graphs allow the estimation of several important parameters for an orbiting satellite. This report presents the pressures and densities at various distances from the satellite as produced by the surrounding ambient molecules and by the outgassing of the satellite.
    Keywords: SPACE VEHICLES
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 97
    facet.materialart.
    Unknown
    Thin-film light-intensity measurement strain-analysis technique. (1972)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The optical response to loading of a thin metallic film deposited on a low-modulus structural substrate is studied theoretically and experimentally. Two types of optical properties called total and central-image transmittance (or reflectance) are shown to be related to the mechanical state of the substrate. Empirical optical-mechanical relationships are proposed between these optical properties and the substrate strain field of a general plane-stress problem. A technique based on wrinkle and microfracture patterns is described for determining principal directions of strain. Experimental results for uniaxially loaded specimens show that it is possible to obtain a nearly linear relationship between transmittance and strain for certain materials combinations.
    Keywords: STRUCTURAL MECHANICS
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 98
    facet.materialart.
    Unknown
    A non-linear dynamic lumped-parameter model of a rectangular plate. (1972)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: A lumped-parameter model of a rectangular plate is developed by assuming fundamental mode solutions and using Hamilton's Principle and the Euler equations to set up the differential equation of motion for the system. The plate theory used may be described as the dynamic analogue of the von Karman large-deflection theory. Four sets of symmetrical boundary conditions are considered with the restriction of uniform pressure dynamic loads. The model takes the form of a mass on a cubic-hardening spring with each term defined by algebraic expressions of the plate parameters. The results for some specific problems are compared with two previous solutions. This method is less accurate but simpler to develop and apply.
    Keywords: STRUCTURAL MECHANICS
    Type: Journal of Sound and Vibration; 21; Apr. 8
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 99
    facet.materialart.
    Unknown
    Solution of eigenvalue problems by Sturm sequence method. (1972)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: A generalized eigenvalue algorithm is presented herein along with the complete listing of the associated computer program, which may be conveniently utilized for the efficient solution of certain broad classes of eigenvalue problems. Extensive applications of the procedure are envisaged in the analysis of many important engineering problems, such as stability and natural frequency analysis of practical discrete structural systems, idealized by the finite element technique. The procedure based on the Sturm sequence method is accurate and fast, possessing several significant advantages over other known methods of such analysis. Numerical results are also presented for two representative structural engineering problems.
    Keywords: STRUCTURAL MECHANICS
    Type: International Journal for Numerical Methods in Engineering; 4; May-June
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 100
    facet.materialart.
    Unknown
    Mixed finite-difference scheme for analysis of simply supported thick plates. (1973)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: A mixed finite-difference scheme is presented for the stress and free vibration analysis of simply supported nonhomogeneous and layered orthotropic thick plates. The analytical formulation is based on the linear, three-dimensional theory of orthotropic elasticity and a Fourier approach is used to reduce the governing equations to six first-order ordinary differential equations in the thickness coordinate. The governing equations possess a symmetric coefficient matrix and are free of derivatives of the elastic characteristics of the plate. In the finite difference discretization two interlacing grids are used for the different fundamental unknowns in such a way as to reduce both the local discretization error and the bandwidth of the resulting finite-difference field equations. Numerical studies are presented for the effects of reducing the interior and boundary discretization errors and of mesh refinement on the accuracy and convergence of solutions. It is shown that the proposed scheme, in addition to a number of other advantages, leads to highly accurate results, even when a small number of finite difference intervals is used.
    Keywords: STRUCTURAL MECHANICS
    Type: Computers and Structures; 3; Sept
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
Close ⊗
This website uses cookies and the analysis tool Matomo. More information can be found here...