ALBERT

Notes: SYNOPSIS. Plasmodium hegneri n. sp. is described from the European teal duck, Anas c. crecca, from Taiwan. The blood stages, so far the only ones seen, are distinguished mainly by the elongate character of the gametocytes, which closely resemble Haemoproteus (though the pigment tends to be finer and less abundant), and the failure of both asexual and sexual forms to displace the nucleus or otherwise alter the host cell. Merozoites average 13.4 ± 2.2 (range 10–19) per segmenter. Trophozoites often adhere to the host cell nucleus, and may have a large vacuole and a remarkable long, slender pseudopodium. The species so far has been seen only in the European teal, although blood films from 194 species and over 1200 birds have been examined.

Notes: SYNOPSIS. Potomacus pottsi n. g., n. sp., a brackish water hymenostome ciliate, is described from the Potomac River. Morphologic studies were made on specimens treated with the Chatton-Lwoff silver impregnation technic. Polymorphism, with the formation of large macrostome forms, was noted. Particular attention is given to the buccal ciliature and its importance to generic assignment in the order Hymenostomatida.

Notes: SYNOPSIS. Pseudocohnilembus marinus n. sp., a marine ciliate, is described from the Virginia coast. Morphologic studies were made on specimens treated by the Chatton-Lwoff silver impregnation technic. Particular attention is given to the infraciliature of the buccal apparatus and its importance to the systematics of the order Hymenostomatida. The buccal infraciliature of the new species differs from that of all other species of Pseudocohnilembus by the presence of a lateral bar of argentophilic granules at the posterior end of the inner membrane.

Notes: SYNOPSIS. When the structures involved in digestive events in T. pyriformis are examined at the electron microscope level, some information is added to that long known from light microscopy. The food trapping mechanism consists of the three membranelles, undulating membrane, oral ribs, and a “valve” apparently closing the opening to the cytopharynx. Both of the latter structures are supported by microtubules. Fibers extend internally from the cytopharynx and are closely associated with the food vacuole as it forms.Clear vacuoles resembling pinocytic vacuoles appear to arise from differentiated areas of the pellicle and plasma membrane. These vacuoles may fuse with primary lysosomes. Hydrolases are thus contributed to the pinocytic vacuoles which may then fuse with food vacuoles. When first formed food vacuoles contain no hydrolases but may acquire them directly, from primary lysosomes or from pinocytic vacuoles. Digestion proceeds to completion in the food vacuole, at which time soluble food products are released to the cytoplasm. Undigested materials are lost through the cytopyge. In stationary growth phase cells autophagic vacuoles form containing mitochondria and other cellular particulates. Such vacuoles probably contain hydrolases when formed and they may receive others by fusion with primary lysosomes.

Notes: SYNOPSIS. Heat shock and stationary-phase conditions both cause fusion of nucleoli. In both cases the process is reversed when the cell is returned to normal physiological growth conditions. Fusion of nucleoli during the cell cycle of logarithmically growing cells was not observed. Likewise, fusion of nucleoli was not observed when the Padilla and Cameron(8) method of synchronization was used. The macronuclei of cells synchronized by the 1 cold-shock per cycle method(8) more closely resembled macronuclei of log-phase cells than did the macronuclei of cells synchronized by the Scherbaum and Zeuthen(12) heat-shock method.

Notes: SYNOPSIS. The presence of anemia that often seems excessive for the amount of parasitemia in Plasmodium berghei infections had led to the suggestion that autoimmunity might be in part responsible for the anemia. In another erythrocytic infection, Anaplasma marginale of cattle, the association of erythrophagocytosis, autohemagglutination and anemia with infection has led to the suggestion that autoimmunization may occur in anaplasmosis. The possibility that similar findings might be present in P. berghei infections of rats has been investigated. Groups of rats infected with P. berghei were examined at 2–3 day intervals during the course of infection. Red blood cell counts, hematocrit values and percentages of parasitized erythrocytes were determined. The rats were bled at intervals and the sera tested for agglutinins for trypsinized rat erythrocytes. Other infected rats were killed, and their spleens and bone marrow were examined for evidence of erythrophagocytosis.Parasitemia reached a peak on the 9th day of infection and became subpatent by the 14th. The greatest depression in erythrocyte numbers occurred on the 11th day, and the counts remained below normal until the 23rd day. Phagocytized erythrocytes, predominantly uninfected, were found in the phagocytes of the spleen and bone marrow from the 5th through the 21st day. Agglutinins for trypsinized normal rat erythrocytes were present in the sera of the rats in titers as high as 1:64 from the 5th through 14th day of infection. Lower agglutinin titers (1:8) were found from time to time in sera of rats made anemic by repeated bleedings.It is not clear whether these agglutinins are responsible for erythrophagocytosis; however, the fact that predominantly uninfected erythrocytes were phagocytized suggests that the erythrocytes might have been opsonized by an autoantibody associated with the P. berghei infections.

Notes: SYNOPSIS. Entamoeba histolytica grown with H3-thymidine in CLG medium took up tritium into DNase-sensitive material in the nucleus and cytoplasm. The distribution of nuclear activity indicated that the entire nucleus, including the peripheral chromatin, may possess DNA; previous investigators reported DNA only in the endosome.The penicillin-inhibited bacterial associate (Bacteroides sp.) used in the CLG medium incorporated tritium from H3-thymidine into autoradiographically detectable DNase-sensitive material. Autoradiographs of amebae fed bacteria prelabeled with H3-thymidine also revealed some nuclear and cytoplasmic label. Thus, the amount of cytoplasmic label due to ingested, prelabeled bacterial DNA and/or actual biosynthesis of cytoplasmic DNA by the amebae themselves, is not known. Also, at least some of the nuclear DNA of amebae is synthesized from ingested bacteria, or, more likely, from bacterial degradation products.

Notes: SYNOPSIS. Molecular heterogeneity of malic dehydrogenase (MDH) in malaria was shown by zone electrophoresis in potato starch, starch gel, and by enzymatic activity with analogs of the coenzyme diphosphopyridine nucletide. A single anodal peak of MDH characterized the normal duck red blood cell whereas P. lophurae free of the host cell had a cathodal form of the enzyme. Infected duck erythrocytes had a combination of these electrophoretic forms. The isolated enzymes had different pH optima with oxaloacetate as substrate: pH 7.4 for the duck red cell and 6.4 for the plasmodial enzyme. The Km of each enzyme for oxaloacetate varied with the pH. The Km at pH 7.4 was 4.1 and 4.4 × 105 M for parasite and host, respectively, whereas at 6.4 it was 2.0 × 105 M for P. lophurae and 6.3 × 105M for the duck erythrocyte. At pH 7.4 both enzymes were inhibited by oxaloacetate concentrations greater than 10−4 M. P. berghei MDH also had a different electrophoretic character from that of the mouse red blood cell. Quantitatively, MDH activity increased with parasitization, and erythrocyte-free P. lophurae contained approximately twice the activity found in the uninfected duck erythrocyte. The quantity of MDH activity of the infected cell was ca. 50% less than the sum of the activities of the parasite and the uninfected cell. It is suggested that these properties of the parasite MDH may give it a physiologic advantage over the red cell under the conditions which prevail intraerythrocytically.

Notes: SYNOPSIS. The structure and certain aspects of the physiology of the sexual cycle, including mating and zygote germination, were studied in strains of the colonial green flagellate Astrephomene gubernaculifera. Mating type inheritance was analyzed in 4 crosses among strains with 7 chromosomes and 1 cross between strains with 4 chromosomes. Results in all cases indicated that mating type was under the control of a single pair of alleles.Twenty-six morphologically identical clones from separate geographic areas were studied with regard to sexual compatibility. On the basis of intercrossing, 6 sexually isolated groups were recognized. Complete gene flow (genetic compatibility) was found among the strains comprising intercrossing Group I.

Notes: SYNOPSIS. Streptomycin (SM) inhibition of greening of Euglena gracilis, strain z, was studied. The antibiotic was most effective if present during cell division in the absence of light. The next most effective condition was that which allowed cell division in the light, and the least effective conditions were those that allowed only minimal cell division in the dark or light (i.e., under “resting” conditions). In the dark, 20–200 times higher concentrations of SM were required for the same degree of inhibition under resting conditions as under growing conditions. The observation of Kirk (Biochim. Biophys. Acta, 1962, 56, 139–51)-that the pH of the resting medium influenced the degree of inhibition–was confirmed.

Notes: SYNOPSIS. Plasmodium japonicum and P. juxtanucleare are two very similar species of avian malaria parasites. The former was discovered in domestic fowl in Japan, and the latter in the same host species in Brazil; it has since been found in chickens in Uruguay, Mexico, and Ceylon. The present study, based on a Ceylon strain of P. juxtanucleare and slides from the Bamboo Partridge (Bambusicola thoracica sonorivox) of Taiwan indicates that the latter host is a natural reservoir of P. juxtanucleare, since this species appears to differ in no significant way from P. japonicum. Infection is common in the Bamboo Partridge (5 of 26 birds showed it), but it has not so far been found in any other avian species, although a total of 973 birds, belonging to 17 orders, 45 families, 110 genera, and 183 species, have been examined from this area. Since the younger stages of Plasmodium nucleophilum look very much like similar stages of P. juxtanucleare, they are compared. The older stages however are usually easily distinguishable, and the former species is so far known only from non-gallinaceous birds whereas the latter appears to be limited to gallinaceous ones.

Notes: SYNOPSIS. The presence of amino acid activating enzymes was demonstrated in the ciliated protozoan Tetrahymena pyriformis. By employing a sensitive hydroxamate assay procedure, the activation of L-valine was assayed in various subcellular fractions of the ciliate, and some characteristics of the enzyme activity in the most active fraction were determined. Most of the activity resided in pH 5 fractions isolated from high speed supernatants of ciliates disrupted by various physical and chemical methods. No activity could be demonstrated in isolated cilia, in pellicles with attached kinetosomes, in microsomes or in macronuclei, providing these organelles were thoroughly washed. A washed mitochondrial preparation isolated by the Mager and Lipmann procedure activated L-valine; mitochondria isolated by the procedure of Hogg and Kornberg did not.The pH 5 fraction isolated from the 102,000 X g supernatant of digitonin-lysed ciliates was stable for several weeks when stored in 0.1 M Tris buffer, pH 7.6 at – 25 C. The activity of this fraction with respect to L-valine activation was dependent on the presence of ATP1 and magnesium in the reaction mixture. The optimal concentrations of these components and of L-valine and hydroxylamine were determined, and the linearity of activity with time and enzyme concentration was demonstrated. Valine activation was not modified by dialysis of the pH 5 fraction, or treatment with RNase, or the addition of boiled pH 5 fraction.

Notes: SYNOPSIS. Five- to 6-day-old resting cells of Ochromonas malhamensis were incubated at pH 6.5 with glucose and appropriate C14 precursors of the methyl groups of phospholipid-choline. Under the experimental conditions L-methionine-C14H3 was the most efficient source of choline-methyl groups, followed by formate-C14, formaldehyde-C14 and DL-serine-3-C14, respectively. Glycine-2-C14 was not incorporated into choline. Both L-methionine-C14H3 and formate-C14 served as precursors for the methyl groups of monomethylethanolamine, dimethylethanolamine and choline. Addition of non-radio-active L-methionine depressed the incorporation of formate-C14 into choline-methyl groups by 50%. The results support the hypothesis that methionine can be the source of all 3 methyl groups of choline, and that formate is probably converted to the methyl group of methionine before transmethylation to choline. However, an alternate pathway from single-carbon sources cannot be excluded.

Notes: SYNOPSIS. Under the influence of ecdysone a uninucleate asexual cell of Paranotila lata gen. et sp. nov. is transformed into a gametocyte in which, as a rule, 8 successive nuclear divisions occur, thus producing 8 male and 8 female pronuclei. No cytokinesis occurs during these divisions. The process should be regarded as a gametogenesis in which only nuclei participate. These gametic pronuclei fuse, male with female, and produce 8 fusion or zygotic nuclei. The cell may now be regarded as a zygote, which soon undergoes plasmotomy, and eventually produces 8 uninucleate, diploid asexual cells. This is the usual course of events. A few exceptions or irregularities have been noted. Throughout gametogenesis, Paranotila is quite indifferent regarding the production of new flagella and axostyles; sometimes they are produced, sometimes they are not.

Notes: SYNOPSIS. The taxonomy of the genera Mallomonas, Mallomonopsis and Synura is based on their silica scales. Examination of water samples from Southern Scotland in the electron microscope revealed that they were plentiful in the area and permitted detailed observations on new species. Comparative studies are made on the flagella of three known species of Synura; the “flimmergeissel” of these biflagellates appear to be more or less similar, but the whip-lash flagella show specific differences suggesting a possible secondary taxonomic criterion. The distribution of the three genera is discussed with particular reference to species found in Iceland, Scotland and Japan. A stage in the conjugation of a species of Mallomonas is described.

Notes: This article deals in an axiomatic manner with problems of definition, classification, and measurement in the national accounts. It argues that the elementary units which must be classified in national accounting are economic objects (real and financial), rather than transactions. The article defines briefly a set of postulates, and shows that the structure of a simple system of national accounting can be derived from them. There are twenty postulates—certain of them establishing basic categories such as sector, time, economic object, value (price); others establishing relations between categories (for example the notion of ownership); and others describing operations in which economic objects can be involved, such as production, final consumption, change of ownership, and change of debtor and creditor (in the case of financial objects). It is shown that the system of postulates makes it possible to consider a large number of accounting concepts (flows or stocks) as classes (baskets) of real objects (e.g., exports, real capital) or financial objects (e.g., payments, total debt of a sector). These concepts can be defined without reference to prices, although prices are necessary to measure them. Other concepts cannot be defined in this way in this system of postulates, for example value added, foreign balance, saving, net worth. However, it is possible to define magnitudes of the latter type and measure them in terms of value: for example, value added can be defined as the difference between the value of receipts and the value of outlays of a sector. In this way it is possible to establish algebraic relations among the national accounting concepts. (This article is a summary of certain parts of the doctoral thesis of the author, published in Norwegian in 1955.)

Notes: It is only within the last two years that the published United Kingdom accounts have been extended to include sector financial accounts; their use for market analysis is, therefore, still in its infancy.The sectors and sub-sectors distinguished in the financial accounts agree very closely with those recommended by the Working Group on Financial Statistics of the Conference of European Statisticians. A major difference is that in the United Kingdom accounts particular emphasis is placed on the distinction between the public sector and the private sector. For this purpose the public sector consists not only of general government but also includes public corporations (that is, public non-financial corporate enterprises). The classification of assets and liabilities is based on a general list which is also similar to that developed by the Conference of European Statisticians.Because of the large capital formation of public corporations and local authorities, the public sector is normally a substantial borrower from the pirvate sector, although its borrowing requirements fluctuate considerably from quarter to quarter because of the uneven incidence of tax receipts. The personal sector provides about one-third of the total saving of the economy, much of which is in the form of contractual saving—through life assurance and superannuation funds and the repayment of house purchase loans. No direct information is available about transactions in stocks and shares by the personal sector, but it is estimated that the sector is a very large seller of securities and in recent years its sales have amounted to £700 million a year.One factor which is important in the analysis of financial accounts and which is not shown specifically as part of the system is the rate of interest. The proportion of personal saving going into the different forms of short term assets has tended to vary according to the relative rate of interest received. The rate of interest also affects the pattern of borrowing by public authorities.The United Kingdom prepares short term forecasts of national income and of the balance of payments, and also forecasts of the borrowing requirement of the public sector and of the central government in particular. For internal purposes, forecasts are made of the various ways in which the government is expected to finance its borrowing requirement. These forecasts provide a useful framework for considering monetary prospects and are particularly important for showing the relation between the forecasts of the balance of payments and of government borrowing from domestic sources, especially from the banks.

Notes: After a short introduction, the first part of this paper (section 3 through 9) provides an outline of the revisions proposed to the System of National Accounts (SNA) of the United Nations which are now under discussion. These proposals were considered by an expert group at the end of 1964 and were accepted by the Statistical Commission of the United Nations in 1965 as the basis for further work on the extension and revision of the SNA. The aim of the revision is to provide a fully integrated system of accounts and balance sheets in which input-output, flows-of-funds and sector balance sheets are incorporated in a generalised accounting framework. Whereas the real side of the economy has been studied analytically in many countries (input-output analysis, demand analysis and so on) much less experience is available on modelling the financial side of the economy, apart from econometric work on saving behaviour, which is fairly widespread. Accordingly, the second part of the paper (sections 10 through 14) contains a discussion of financial model-building in which a number of possibilities are explored. The final topic discussed (section 15) is demographic accounting, by which is meant a framework for recording and analysing human, as opposed to economic, flows and stocks. The development of such a system arose out of the emphasis placed by the expert group on the integration of demographic and economic information.

Notes: This paper is essentially a summary of the book Measuring the Nation's Wealth (Volume 29, Studies in Income and Wealth, New York: National Bureau of Economic Research, 1964), which is the report of study directed by the author. The purpose o f the study was to assess the problems and possibilities of conducting a national census of real wealth as a basis for continuing wealth and balance sheet estimates for the U.S. economy, by major sector.It is stressed that the balance sheets and wealth estimates should be designed as a consistent part of an integrated system of national income accounts. Thus, valuation (at market prices and/or depreciated replacement costs), sectoring, and type-of-asset detail in the basic data and derived estimates should be compatible with the flow estimates contained in the economic accounts. Consistency of stock and flow estimates facilitates analysis of inter-relationships, and is helpful in the estimation process.It is recommended that in the U.S. asset data by broad categories be collected as part of the recurring economic censuses and other reporting systems, but that detail on fixed reproducible assets (construction and equipment) at cost, by year or period of acquisition, be obtained from a small sample of respondents in each industry. The detail would be useful in its own right, and also permit revaluation of the assets by use of price indexes and depreciation rates to a current depreciated replacement cost basis. Where feasible, respondent estimates of market values would also be obtained.The proposal is thus a compromise between the Japanese 1955 sample survey of assets, and the detailed wealth inventory of the U.S.S.R. which was begun in 1959. Preliminary work is now underway in the U.S. federal statistical agencies to expand collection of asset data, and to prepare comprehensive wealth estimates in the framework of the national income accounts.

Notes: Ľutilisation du SCN actuel pour les besoins de la coopération économique internationale est considérée ci-après à la lumière des expériences accumulées au sein de la Communauté Economique Européenne.Ľexpérience des années récentes prouve que si, dans une première étape, le SCN a pu servir de cadre général ďanalyse économique, ce cadre s'est rapidement révélé insuffisant lorsqu'il s'est agi de confronter des structures et des politiques nationales ou de définir des politiques coordonnées dans les domaines économique, social ou financier. Les travaux menés dans différents domaines ont montré la nécessitéďétendre, de détailler, de modifier et de préciser le système actuel de comptabilité nationale.Une question importante concerne ľintérêt de faire apparaître ou ďéliminer du système comptable les différences institutionnelles existant entre pays. Bien qu'à cet égard ľavis des utilisateurs ne soit pas toujours unanime, ľexpérience plaide en faveur ďun système reflétant pleinement les différences réelles de structure entre pays, mais suffisamment détaillé afin de permettre les regroupements fonctionnels nécessaires à certaines analyses.Ľarticle se termine par un bref rappel des principales critiques adressées au SCN actuel par ceux qui, dans le cadre de la Communauté Economique Européenne, se servent de la comptabilité nationale, critiques auxquelles la révision du SCN apportera, espérons-le, une réponse satisfaisante.

Notes: The author believes that the theoretical controversies relating to the two concepts of production have reached a dead end, and that the answer to these questions must be sought in the results of empirical research. It is to this end that he presents the results which he has arrived at in his computation of Yugoslav national income according to the Yugoslav methodology, which shares the material product concept, and the methodology of the United Nations, which is typical of the enlarged concept of production.In comparing the results of the computations according to the two methodologies, the author concludes that in spite of conceptual differences the deviation of the Yugoslav estimates from the values calculated following the system of the UN is relatively modest (4.2%) if domestic product at factor cost is used. The difference relative to aggregates calculated at market price rises to 13.6%. The author explains these differences by the fact that all the Yugoslav aggregates are computed at market prices, and that services financed by budgetary contributions, which amount to 80% of all services, have found their place in the market prices of material production. He finds that the choice of prices used for calculation has a greater weight for the computation of production than conceptual differences in the methodology of the computations.

Notes: In my article I have taken up different expressions for the terms of trade in foreign trade, and especially I have been interested in a breakdown of total gain into two parts, namely the part due to the terms-of-trade effects and the part due to the price level effects. I have also taken up the inter-sectoral gain from terms of trade and the relation to the terms of trade in foreign trade. Besides the usual index for terms of trade-the ratio between output prices and input prices-I have also introduced another index for terms of trade corresponding to the relation between the output price index and an index consisting of a weighted average of input prices and prices for final demand. Finally I have tried to give some emperical findings which should throw light on the development of the Danish terms of trade for the period 1949 to 1964.

Notes: This paper is concerned with the influence of different estimation procedures on the data for real output by industry group of a number of O.E.C.D. countries. The authors have examined the methods and indicators used in preparing sector real output data and have tried to assess the effect of the different methods on the recorded changes of sector real output. The data for real output, employment and productivity are compared for the different sectors and countries. The comparison between sectors lays particular emphasis on the dichotomy between the services and non-service sectors of the economy. In this comparison as well as in inter-country comparison it is seen that the data are influenced to a considerable extent by different methods. The survey of estimation methods also shows the incidence of use of double deflation techniques and other methods in the different countries, and the extent to which quality change, output specification and valuation problems are reflected in the different methods.

Notes: With few exceptions, only cormmodity flows and values which can be determined by means of commodity flows (flows of goods and services) are calculated in constant prices in the official national accounts of the Federal Republic of Germany. Figures an the industrial origin and the final use of the national product are published, the former according to thirty industries, the latter according to the major types of uses of which in particular private consumption expenditure has been further analysed.The computations at constant prices are based on market prices and not on factor costs. It is only on this basis that a uniform valuation of the production and the expenditure side can be made since the turnover tax, which is the most important indirect tax, is contained in the elements of final demand in varying shares and cannot be eliminated (the tax is part of the price and has cumulative effect).The computation at constant prices presupposes a breakdown of the values in current prices according to quantities and prices. This raises a number of problems, e.g. because seller and buyer may consider differing aspects-production costs, technical attributes, etc., on the one hand, and use etc., on the other hand. In part there exist only vague ideas, or no ideas at all, as to what is to be considered-from a theoretical point of view-as quantity and price. In other cases the two values can only with great difficulties, if at all, be quantified, or there exists no market price and only the production costs are available. The author deals in greater detail with differences in quality and new commodities, the determination and treatment of quantities and prices for services, in particular for trade services (services attached to goods), the computation of government services at constant prices considering the development of productivity in public service, the determination of the values calculated as balances, above all the treatment of changes in the terms of trade for net exports of goods and services, the computation of the contributions of industries to the gross domestic product and, finally, the reconciliation of the production and the expenditure side.In a third section the author deals with index formulae and the base year. In the majority of cases values are deflated; partly, however, they are currently adjusted by means of volume and quantity data. On the production side the two methods are in part combined.In a concluding section a survey is provided of the computation methods used in the Federal Republic of Germany and on the available material for the computations. Mention is made of depreciation at constant prices.

Notes: A quarterly macro-econometric model of Japan's postwar economy has been constructed for the period 1954–1965 FY on the basis of standardized quarterly national income accounts. The model is designed for facilitating short-term economic forecasting and formulating adequate fiscal and monetary policy. Longer-term factors such as labor mobility, technical progress, etc., were also considered in the model.The model consists of fifty-three equations related to most of the macroeconomic variables in both money and real terms, and the equations were estimated in principle by the limited information maximum likelihood method. Principal exogenous variables related to policy instruments are government expenditures including transfers, parameters of tax functions, interest rate, and prices and fares controlled by the government, etc. In formulating the model, non-linear specifications were used whenever found necessary.Results of our testing on its predictive capability indicated fairly satisfactory performances for our observation period and also for 1966 FY. Multipliers related to fiscal and monetary policy were also obtained, indicating the dynamic characteristics of the Japanese economy, in particular, represented by dynamic business fixed investment, as compared with corresponding multipliers of the U.S. models.Although the model is exploratory and to serve as a core for a more disaggregated “Master Model,” the usefulness of the model for our purposes and the workability of our quarterly national accounts data for model-building have been recognized. The quarterly data, however, still remain to be improved especially in regard to consistency between income and expenditure and integration with flow-of-funds accounts.

Notes: The measurement and inter-spatial comparison of Latin American real income levels calls for techniques which depart substantially from the conventional procedure of applying such official or free market exchange rates as happen to prevail in any given period. The reasons are varied, the main ones being that in an area such as Latin America prices are notoriously volatile, their structure differs radically from that encountered in other parts of the world, and the exchange rate system is characterized by frequent and usually irregular revisions, while in certain countries a multiple exchange rate system applies and no single factor is available for conversion purposes. In addition, there exists the problem common to all developing countries that the rates to a large extent reflect the exchange value of a limited number of export commodities vis-à-vis a wide range of imported goods and in no way typify the internal-external price relationship for the bulk of production which by its nature fails to enter into international trading transactions.The author has endeavoured to circumvent these difficulties by adopting the often-discussed “purchasing power parity” approach whereby national accounts data are converted into a common monetary denominator (in this case, the U.S. dollar) expressed in “real” or quantitative terms which as far as possible eliminate inter-spatial price differences. Results are presented and analyzed, first for the base year 1960, and then for the period 1955–1964 at the level of main expenditure sectors as well as for the total gross domestic product.To the extent that available statistics permitted, results for Latin American countries are also related to the United States and certain countries in Western Europe, a main objective being to determine the approximate dimension of the incomes “gap” and to ascertain whether this is increasing, decreasing or remaining very much unchanged in size.

Notes: The main purpose of the study is to determine the savings potential of urban and rural households in India and in the process determine the possible savings and consumption functions separately for urban and rural areas.Four different possible functions have been used for determining the savings behaviour of the households both at the aggregate level and at the per capita level. The rural households, according to the results, have an extremely low rate of saving with income elasticity of saving of less than unity. For the urban households on the other hand, the income elasticity of saving is high enough to suggest the possibilities of considerably high savings potential.To understand the consumption behaviour of these households, the long-run and the short-run marginal propensities to consume and the marginal propensities to consume out of‘permanent’ or ‘normal’ income and ‘transitory’ income have been worked out. For the urban sector none of these give encouraging enough results and the analysis has been extended to examine whether other factors like prices and household assets are of any significance. Whereas for the rural sector, Milton Friedman's theory of ‘permanent’ or ‘normal’ income is somewhat substantiated, other factors like ‘transitory’ income, prices and assets appear to inthence urban consumption behaviour though no single one of them substantially enough. A negligible effect of ‘permanent’ income on urban consumption behaviour is, on the other hand, very clearly suggested by the results.Household consumption and savings have next been projected using the above results to determine the possible levels for the next three years. The results suggest that the rate of domestic savings likely to be achieved by the end of the Third Five Year Plan (1965–66) falls short of the targets laid down.

Notes: This paper examines differentials in output, employment and productivity across seventeen service industries in the United States from 1939 to 1963. Included are 9 retail trades and 8 services mostly from the personal service group. The industries chosen were those for which it was possible to obtain from available data reasonably comparable measures of output and input for selected years since 1939. Also, they are industries for which it is possible to calculate a measure of real output that is not based on labor input.Sixteen of the industries show positive rates of change of real output per man. Thus there appears to be no basis for assuming that productivity cannot or does not increase in industries providing services. However, the rate of increase for the group as a whole was not as rapid as in manufacturing or in goods production as a whole.The data for the seventeen industries give strong support to the hypothesis of a positive correlation between industry rates of growth and rates of change of productivity. The correlations are of the same order of magnitude as those found by other investigators in studies of manufacturing industries.The coefficient of correlation between growth of output per man and growth of output is .93; between growth of output per man and growth of employment it is .54 for 1939–1963. The comparable coefficients for the 1948–1963 period are .70 and .13.The results also parallel those reported for manufacturing in one other respect, namely, the absence of any correlation between changes in output per man and changes in compensation per man.The paper concludes with a discussion of the problems encountered in measuring changes in real output in these industries and presents some alternative estimates based on different concepts and different sources.

Notes: Cet article résume brièvement les méthodes utilisées par le Service de la statistíque yougoslave dans le calcul du revenu national aux prix constants. En ce qui concerne l'industrie, la méthode utilisée consiste à multiplier le revenu net par unité dans l'annCe de base (distribué par type) par les quantités produites dans l'année en cours. Cet article discute également des autres méthodes possibles, et fait ressortir les raisons qui se trouvent à la base des choix effectués.La partie finale examine la validité des mesures obtenues; elle met en garde contre la tentation de procéder a des interprétations de caractére normatif sur la base de prix déterminés par voie administrative ou sujets a d'autres types de distortions. Des données, classées par industrie et par région, sont fournies pour la periode 1952–1965.

Notes: After an introduction setting out the general state of work on the national accounts in the Middle East the author considers the principal uses of national accounts statistics in less developed countries. The first group of uses discussed is in connexion with the measurement of growth and the making of international comparisons. The author is of the opinion that in many cases the primary statistical series are so weak that the fact they they are combined together into a series called national income or gross domestic product lends to them a significance which they do not really possess. The real problem is to improve the quality of the primary series.A second use of national accounts statistics is in connexion with fiscal and budgetary policy. In the statistically advanced countries this is one of the most important uses but in the less developed countries budgetary policy has not yet reached a level of sophistication which would call for the use of national accounts data. Moreover, the time factor involved in assembling accurate national accounts estimates militates against their effective use for short term forecasting.The author considers that the most important use for national accounts statistics is to provide a framework for development planning. The United Nations system is not altogether appropriate for this purpose. It grew up primarily as a system for recording income flows but in development planning one is concerned equally with commodity flows with a great deal of attention being focussed upon intermediate products. The proposals of the working group of African Statisticians for an adaptation of the S.N.A. to African countries represents a most important advance in this respect.In the final section of the paper the author advocates a broader definition of capital formation to include developmental expenditure which is not properly defined as fixed capital formation. Education expenditure is cited as an example. It is suggested that in the national accounts it would be desirable to operate with gross concepts. However, the growth of the capital stock is obviously important in less developed countries and it is suggested that statistical techniques be devised to measure it directly wherever possible. Finally, attention is drawn to the ambiguities and weaknesses in the concept of residence as used at present in the S.N.A.

Notes: Cet article examine comment les calculateurs modernes servent ou pourraient servir en comptabilité nationale, soit pour ľutilisation des comptes, soit pour leur préparation.Du premier point de vue ľauteur insiste ďabord sur la complexité croissante des comptes nationaux qui rend difficile leur usage à partir de la forme classique de tableaux imprimés et tend à rendre nécessaire leur transcription sous forme de cartes perforées, cequi permettra de faire à la machine un certain nombre de travaux élémentaires sur les comptes.On peut également penser que les calculateurs permettraient des sondages rapides sur certains éléments des comptes en cours de préparation.Enfin, les utilisations des calculateurs électroniques pour ľanalyse des comptes, ľétude des modèles de projection et leur résolution sont bien connues.En ce qui concerne ľutilisation des calculateurs pour la préparation des comptes ľauteur montre que, étant donné le caractère imparfait du système statistique dans de nombreux pays, les comptes économiques des années passées sont en partie préparés àľaide de véritables modèles qui permettent de passer des données de base aux comptes et qui peuvent dans certains cas être résolus àľaide de calculateurs électroniques.Là oùľinformation statistique est meilleure, des éléments des comptes peuvent être calculés directement par agrégation des données élémentaires. On peut donc penser qu'une époque viendra où la plus grande partie des comptes nationaux sera préparée àľaide de machines électroniques à partir des données de base.On peut alors imaginer un monde où les transactions élémentaires seraient enregistrées au moment où elles seraient réalisées, rendant ainsi entièrement automatique la préparation des comptes nationaux. Mais alors les machines pourraient réunir les modèles de préparation et les modèles ďutilisation des comptes. Ľétape intermédiaire que constitue la préparation et la publication des comptes sous la forme actuelle deviendrait alors inutile.

Notes: In a number of underdeveloped countries today, adequate statistics for estimating national output by traditional national accounting methods are unavailable or unreliable. However, many of these same countries do publish data on monetary variables at an early stage in their development. These data can now be used to estimate national income.In this study the money supply was defined to include all currency in circulation, private deposits subject to check at all banks and postal systems, all government deposits, and unused overdrafts less float. The national accounts data were taken from United Nations sources and data supplied by various foreign statistical offices. To make the accounts more comparable in terms of coverage and to limit reported income to the monetized sector of the economy, non-monetary imputations were deleted.The monetary and national accounts data were combined in a multiple, stepwise regression. National income was used as the dependent variable and money supply and other data were used as the independent variables. The final estimating equations explained about 96 per cent of the variation in income between countries. Other tests were conducted using the currency ratio, transactions velocity, population, and per capita consumption. However, these variables did not augment the explanatory power of the regression equations.When the equations were used to estimate national income for twenty-two under-developed countries, the derived estimates showed a high degree of concordance with reported income where it existed for comparative purposes. The results indicate that monetary data can be used to estimate national income for underdeveloped countries with a relatively high degree of accuracy, between countries, and from year to year within a country.

Notes: In The Present Paper The Author Reviews The Results Of An Investigation Aimed At Estimating The relative level of stocks in Hungary in terms of international comparisons. Though international comparison was limited by scarcity of data, it has still become evident that stocks as a whole, compared to production and sales, seem to be unnecessarily high. The investigation has been carried out in relation both to the level of stocks and their rate of increase.The global volume and building of stocks, however, did not give a satisfactory explanation, and the investigation had to be extended to the individual groups of stocks separately. In order to facilitate the comparison, stocks were classified into the following groups: agricultural stocks, goods in process, industrial finished goods and manufactures held by users, and retail stocks. The classification was based on the different function of the individual groups. This classification of stocks could be compared only with the data of the U.S A.The international comparison revealed that both the volume and the rate of increase of stocks in Hungary is unreasonably high. They are high even if we consider that the growth rate of the economy in Hungary was greater than in any of the countries examined.The author refers to the fact that the stock problem was one of the starting issues in the economic research process which led to the reform of the Hungarian economic management system introduced on 1st January 1968.

Notes: The national income and product account (United Nations concept) in current prices itemized by distributive shares and by type of expenditure is given for the period 1929–1937. The national income by industrial origin and the reproducible national wealth are computed for the year 1930. Differences between the U.N. and the material concept are explained by means of the 1939 data.The national product series in real terms are computed (a) by means of the price deflation of the types of expenditure, and (b) as the physical output of goods and services by industrial origin (since 1926). Major changes In distributive shares are explained with the help of Price-cost analysis.The national product in real terms attains the lowest point in 1935 and not in 1933, as the industrial production and foreign trade series indicate. The structure of gross national expenditure reveals the same pattern of shifts, as is well known from other industrially developed countries during the business cycle.The development of national product by industrial origin, however, reveals some conspicuous singularities. Especially the uninterrupted increase in trade services (in terms of both persons engaged and turnover in constant prices) is an anomaly in the period of 1929–1937.Further, the Increase of rent (due to the gradual abolition of rent control), contrasting with the general fall of prices, led to a major shift in the distribution of national income during the early thirties. The other remarkable change resulting mainly from the changing price structure was the decrease of the farmers' share in national income.The production, transportation and distribution series in real terms reveal some time-lags. These result partly from the shift from the foreign to the home market, partly from the compensatory effects of stock movements, and partly from the delayed adjustment of consumers to declining income.

Notes: This paper presents a new annual series for United Kingdom gross national product, at current and constant prices, calculated from the expenditure side. These results differ significantly from previous estimates in that they go back to the beginning of the railway age on an annual basis and also in that the constant price estimates involve a detailed deflation of the main components of expenditure on consumption and capital formation. The implications of the new results are summarised, with particular reference to rates of growth and relative price changes, and an appendix describes the sources of the estimates.

Notes: Study of relationships between outputs, inputs, prices, and final demands in the United States can be strengthened by: (1) eliminating disparities in official measures of output (mainly the Index of Industrial Production and Real Gross National Product), and (2) obtaining agreement on the conceptual framework for studying these relationships.Real Gross Product has provided a consistent framework for study of productivity and prices for the total economy and for broad industry groups, but has not easily permitted the analysis of commodity detail particularly for intermediate commodities. Industrial Production, on the other hand, has considerably extended the detailed analysis of commodity output but has not provided a basis for systematic analysis of productivity and prices within a consistent framework for the total economy.This paper illustrates the effect of some of the disparities between Industrial Production and Gross Product in manufacturing on the analysis of relations between prices and output and prices and productivity. This is done for the 1954–1958 period when benchmark data are available for both measures. Inconsistencies for a number of industries cause difficulties in analyzing the interplay of demand and cost influences on price changes; for example, industries which rise above average in output and below in price in one measure are not the same as those in similar price-quantity relationships in the other measure.The paper concludes by recommending improvements in data and concept in order to eliminate some of the disparities and to enable analysts to reap the benefits of both types of measures of real output.

Notes: Because of the recent public concern over the brain drain, this study attempts to measure the U.S. gain of highly skilled manpower. The paper discusses the serious short-comings of the data on gross immigration of scientists and engineers provided by the U.S. immigration authorities as a measure of true U.S. gains. In a case study of Swedish scientists and engineers it was found, for example, that whereas the U.S. data showed a gain of 106 Swedish scientists and engineers over a number of years, the net figure was only 26 after adjustment for remigration and the application of the proper OECD education criteria.The paper then reports the findings of a statistical study which uses the stock data on U.S. scientists in the National Register of Scientific and Technical Personnel to estimate the number of foreign born in this stock and analyse their characteristics with respect to age, educational attainment, and employment preferences.It was found that nearly 7 percent of all U.S. scientists are of foreign origin (foreign born and foreign secondary education), whereas 11.5 percent of all scientists with a Ph.D. are of foreign origin. The percentage among Ph.D. holders is highest in meteorology (22.3), followed by linguistics (18.7), physics (17.1) and statistics (14.6).The greatest percentage of scientists comes from Canada (10.4 per thousand), followed by Germany (8.3 per thousand) and the United Kingdom (6.7 per thousand). However, after adjustment of these data for the different sizes of the total foreign born population from each country in the U.S., it turns out that by this measure the greatest shares of scientists are supplied by the Japanese, followed by the Austrian-Swiss, Benelux and Canadians.The analysis of the age composition of all foreign born reveals that in the age groups that were 20–29, 45–54, and 65 and over in 1964 foreigners represent a smaller than average share, probably reflecting war casualties and education completed at a later age. Germans and Austrians are heavily concentrated in the group 55–64 years old in 1964, suggesting that a great share of scientists from these countries may have been victims of a brain push.

Notes: The paper discusses national balance sheets in the light of the proposals for their inclusion in the revised SNA. The author uses his own estimated national balance sheet of the United Kingdom as a basis for discussing the problems encountered in the compilation of national balance sheets, and the greater part of the paper is concerned with questions of valuation, classification and statistical source material. The concluding section deals briefly with the structure of the national balance sheet of the United Kingdom and compares its structure with that of the national balance sheet of the United States. Provisional national balance sheets of the United Kingdom for each of the five years 1957 to 1961 are presented.

Notes: This review article initially summarizes some of the highlights of the volume Why Growth Rates Differ, including the use of income shares as weights for the various factor inputs and some of the major factual conclusions drawn from the inter-country comparisons. Some of the main factors in differences in income levels and differences in growth rates are then reviewed.In appraising the contribution of the volume, the monumental task is emphasized. This study illustrates the adaptability of the approach which Denison developed initially in The Sources of Economic Growth. The volume meets many of the questions and criticisms raised of his earlier study, and should encourage a shift of the discussion from methodology towards the substance of the empirical results.The volume introduces some shifts in emphasis on the importance of different factors in growth. The role of demand variations and the contribution of capital is considered, but the evidence in the volume gives less emphasis on the importance of these factors than earlier work by others in both the United States and Europe. The volume gives some emphasis to shifts out of agriculture and the self-employed in the high postwar growth in many individual European countries. It considers the effects of reductions in trade barriers, and follows the view of most economists in playing this down. Advances in knowledge are also considered.Those who are interested in questions of economic growth, past and future, and economic policy in this area will find much in this volume for study and reflection.

Notes: Both the yearly and the quarterly national accounts of Norway are derived with intensive use of electronic computers, punchcards and magnetic tapes.The introduction of the paper gives a short description of the Norwegian national accounting system. Four aspects are stressed. First, the accounts are built up by the production approach with the main purpose of, on the one hand, showing the domestic product at market prices by industry of origin and, on the other hand, showing a detailed breakdown by categories of expenditure. Second, the main part of the system consists of an input/output matrix of about 1700 commodities, 130 industries, and 150 final demand sectors. The input/output table is thus not made separately but is the main body of the national accounts. Third, this annual input/output table is used as a basis for estimating quarterly accounts. Fourth, an econometric model for analysing and forecasting developed by the Norwegian Central Bureau of Statistics is closely linked to the national accounts.The paper concentrates on how the computers and punchcards are used. It describes how all available information on the supply and use of commodities, prices, etc., is brought together. As far as possible punchcards from the basic statistics are taken over for further processing. As the end result each flow in the national accounts is represented by a punchcard.The paper discusses what has been gained by switching from worksheets to punchcards. There are advantages during the work and there are advantages of having the final results on punchcards.The final sections describe how the punched cards for the yearly accounts data are used as basis for preliminary estimates of quarterly accounts and also in a model for forecasting.

Notes: This study assesses the relationship of education and economic growth, economic development and economic progress in aggregate, in structural and in micro-economic terms on the basis of one hundred years of Canadian experience. Education is considered as a factor of input. The contribution made by knowledge resulting from additional education expands the capacity to produce, and increases the demand for goods and services and the desire for greater leisure. The dual function of education is stressed: the demand and supply effect. Education is examined both as a cause and a consequence of economic growth, economic development and economic progress, through its contribution to the quality of the labour force, earning capacity, both individual and national, productivity, the rate of economic growth and the character of economic development.The Canadian experience suggests that educational progress generally occurred in line with economic development during the first eight decades, with the real take-off in educational advancement only occurring in the last two decades, when the nation reached the stage of technological maturity and high mass-consumption. Among the reasons for the lower ratio of gross national product devoted to education in the first eight decades were the low priority attached to education, the emphasis on investment in physical capital because of its shorter pay-off period than investment in human capital, and the heavy reliance on a substantial flow of immigrants who had obtained their education and training abroad. A distinct change occurred, however, in the last two decades, partly as a result of new technological challenges and partly as the result of changes in private and public attitudes, as the recognition of the rewards of education in terms of individual advancement and social progress led to a greater willingness to devote an increasing proportion of the nation's resources to investment in human capital, long pay-off periods notwithstanding.

Notes: Human capital concepts and measures have been applied and misapplied to an increasing variety of economic problem areas, two of which are examined.One of these is measurement of human capital gains and losses through migration. First requirements here are specification of the gaining or losing entities and of the relevant welfare functions. Alternatives in these respects are outlined. It is then argued that an appropriately adapted Fisherian present-value assessment of human capital is normally the correct measure. Replacement costs are a legitimate substitute only for young migrants with little cumulated learning through experience and even then they have usually been fallaciously applied. Probability adjustments for migration and re-migration are required in both cost and present-value assessments of human capital effects of migration-relevant policy alternatives, but the nature of those adjustments differs with the measurement approach used.For longitudinal analysis of contributions of human capital to economic growth, all measures of human capital stocks are inappropriate. A first principle of such analysis is measurement of resource inputs as flows. A coordinate principle requires that disaggregation be carried as far as necessary to distinguish essentially homogeneous categories of labor inputs. Though a way of separating out the schooling versus on-the-job-experience components of human capital is illustrated, it requires some strong assumptions. Splitting men into abstracted human capital components is better avoided in growth analysis. Furthermore, categorization of labor-force sub-groups could equally well provide the basis for rate-of-return assessments of marginal changes in the pace of investments in humans. Such assessments would incorporate the main elements of capital theory except valuation of the capital asset itself.Ultimately, human resource measurements for use in major public policy decisions relating to either growth or migration (or both) must incorporate modifications or error components that allow for development phenomena that elude marginal assessments. Among developing countries especially, a consideration of educational diffusion processes and dynamic productivity scale effects, for example, could have critical measurement and policy implications.

Notes: This article discusses the revival of interest in research on cyclical behavior in the socialist countries, and the resulting shifting requirements placed upon the national income accounts. The first section discusses the economic experience and the institutional factors leading to this shift in emphasis. The second section deals with the use of national accounts in cyclical analysis, with particular reference to the Czechoslovak experience. The third section extends the discussion to the use of national accounts data for economic forecasting. The final section discusses the theory of economic fluctuations under socialism, and compares it with cyclical behavior in capitalist economies.

Notes: The system of social accounts described in this article is based on the following five principles:(1) Producers of goods and services are working organizations which represent groups of people or individuals organized for the purpose of earning a living by producing goods and services that satisfy individual or collective needs. Business, government, profit and nonprofit, corporate and unincorporated working organizations are treated in a uniform way.(2) Since the behaviors of the market and non-market sectors differ considerably, these two sectors are consistently separated throughout the accounting system.(3) There are four basic activities: (a) production, (b) consumption, (c) investment, and (d) income redistribution. These call for four separate accounts: (a) Working Organizations, (b) Households, (c) Community, including government and certain non-government institutions, and (d) Accumulation. The fifth account, Rest of the World, serves for balancing purposes.(4) The same classifications of transactions are used for activities and institutions, making possible complete matching of social product and financial flows accounts.(5) The system strives to achieve the maximum analytical flexibility. Some of its possibilities are visible from the classification of industries: A. Market (Material) Sector: 1. Agriculture, II. Forestry, III. Mining and Manufacturing, IV. Construction, V. Transportation, VI. Trade and Catering, VII. Handicrafts; B. Non-Market (Non-Material) Sector: VIII. Housing and Communal Economy, IX. Education, Culture, and Social Welfare, X. Public Services Social Organizations (Political, Religious, etc.), Finance and Insurance, Public Administration and Judiciary, National Defence. Sector A corresponds to the material definition of social product. Sectors A + B correspond to the SNA definition. Sectors A + B minus Industry × reflects the welfare definition. Further, Industries I-IV produce goods, V-VII market services, VIII and IX non-market services with welfare content, X intermediate nonmarket services, V-X all services.

Notes: (1) The primary contribution from the computer's application to the national accounts may well be to erode the line between micro and macro analysis. Key macro totals in the accounts sum individual company reports. The computer permits us to develop distributions of these reports. Such distributions, regularly presented, would permit discovery of the first forerunners of change, would help distinguish, e.g., widespread strength in an export drive or a profits surge, from participation by a few major concerns that dominate the aggregate.(2) The strikingly different parameters in cross section and time series studies (e.g., price elasticity of housing) will in some measure reflect incomparability between the micro data that enter into each. The computer makes possible the use of the wide array of micro data that really underly the accounts to develop consistent analyses of time series (of both aggregates and distributions) and cross section analyses.(3) The inconsistencies now imbedded in the accounts but gilded over by the abilities of the estimators are well-known. Discussions of wage price policy rest on data for wages that have no necessary compatibility with data on profits, etc. But since 1,500 corporations account for at least half of U.S. net income, sales, and investment, the computer can test the consistency of reports made by different units in these firms to different agencies—a process totally out of the question before the computer.(4) The potential that the computer offers for prompt revisions in the accounts; for revisions by systematic rule; for tests of sensitivity of the entire set of accounts to particular tailor-made adjustments, is clear.(5) Company purchase orders and accounts are increasingly recorded on cards or tapes. From these we may derive input-output detail and process detail that are light years better than those now feasible from intermittent survey aggregates.

Notes: It is argued that the conventions of an accounting system, such as the S.N.A., are a matter of convenience. The treatment of education as a current expenditure, instead of as a form of capital formation, derives from the Keynesian system, and is not appropriate for dynamic problems of developing countries, where weaknesses in education are often the main “bottleneck” in the process of development. In such countries, expenditure on education clearly yields its benefits mainly in the longer run. To treat this as a consumption item biases policy in the direction of using financial resources for fixed capital rather than human investment, and may cause aid agencies to penalize countries which expand their educational systems. A similar problem arises on other expenditures such as health, but the case for treating them as investment is not so strong.To treat educational expenditure as part of capital formation logically requires two major changes. First education needs to be removed from private and public consumption, and for this purpose a fairly broad definition of what is education should be used. Secondly, the stock of educational capital should be valued. The valuation problems are, however, severe. Variations in cost components make historic cost of little value as a yardstick, and calculations of future returns are fraught with difficulties. Using replacement costs, which seems the best method, involves the construction of education profiles in physical terms which can then be valued by present or by standardised costs. The depreciation of human capital through mortality and retirement can be allowed for by applying national average rates to these physical profiles.Switching educational expenditure from current to capital accounts involves no serious practical problem. However, although there should logically be an allowance for depreciation on human capital, this is not recommended; single monetary measures of educational stock are not very meaningful, and this would involve changing the definition of “net” aggregates. Development of statistics of educational stocks and flows in physical terms—the beginnings of “demographic accounting” fully integrated with the rest of national accounting—is strongly advocated.

Notes: The now urgent problem in the field is to translate into practice the theoretical agreement, slowly reached over the past two decades, on the need for and feasibility of sectorized national balance sheets.The paper discusses the five main uses of national balance sheets, viz. (1) the study of the relations among assets and liabilities at one point of time in one country, particularly the position of financial institutions; (2) the analysis of changes in one country's financial structure between several balance sheet dates; (3) the comparison of balance sheet structure at one date among two or more countries; (4) the comparison of the financial development of several countries for at least two but usually more numerous balance sheet dates; and (5) the use of selected balance sheet items, e.g., reproducible tangible assets or liquid financial assets, in econometric models.Examples are presented of the first three uses, viz. for (1) an eleven sector balance sheet matrix for the U.S. as of the end of 1962; for (2) an unsectored national balance sheet of the U.S. in 1900, 1912, 1929, 1939, 1945 and 1958; and for (3) a comparison of condensed unsectored national balance sheets for a dozen countries (USA, UK, France, Germany, Belgium, Norway, Italy, Japan, Israel, Mexico, India and the USSR) for a date in the neighborhood of 1960.

Notes: The widespread use of common depth point techniques has emphasized the need for accurate static corrections. Manual interpretation methods can give excellent results, but a computer technique is desirable because of the great volumn of data recorded in common depth point shooting. The redundancy inherent in common depth point data may be used to compute a statistical estimate of the static corrections. The corrections are assumed to be time-invarient, surface-consistent, and independent of frequency. Surface consistency implies that all traces from a particular shot will receive the same shot static correction and all traces from a particular receiver position will receive the same receiver correction.Time shifts are computed for all input traces using crosscorrelation functions between common depth point traces. The time shift for each trace is composed of a shot static, a receiver static, residual normal moveout if present, and noise. Estimates of the shot and receiver static corrections are obtained by averaging different sets of the measured time shifts. Time shifts which are greatly in error are detected and removed from the computations.The method is useful for data which has a moderate to good signal to noise ratio. Residual normal moveout should be corrected before estimating the statics. The program estimates the statics for correctly stacking common depth point traces but it is not sensitive to constant or very slowly changing static errors.

Notes: Spurious reflections showing a residual move-out are generally present on both corrected seismic cross-sections and common depth point composites.We propose to determine a space-time filter satisfying the following conditions: to attenuate as much as possible reflections presenting a given move-out, to retain intact reflections whose time gradient is zero (or has a predetermined value), to be applicable efficiently even to a small number of traces, not to amplify random noise unduly.After briefly indicating the design principle of these filters, we shall give the results of their application to the theoretical examples, in order to bring out: the influence of sampling interval and filter length (possibility of achieving efficient filtering using an apparatus with a small number of terms), the effect of filtering on dipping reflections (reduction in amplitude and distortion increasing with the time gradient), the range of reflection move-out that can effectively be filtered with the same apparatus, the disturbing influence of random noise.〈section xml:id="abs1-2"〉〈title type="main"〉RESUMEOn constate généralement, tant sur les films sismiques corrigés que sur les résultats de couverture multiple, la présence de réflexions parasites présentant une courbure résiduelle d'indicatrice.Nous nous sommes proposé de déterminer un opérateur de filtrage spatio-temporel satisfaisant aux conditions suivantes: filtrer le plus possible les réflexions présentant une courbure donnée, conserver intégralement les réflexions dont le gradient temps est nul (ou a une valeur déterminée), pourvoir être appliqué efficacement à un petit nombre de traces, ne pas amplifier outre mesure les bruits inorganicés.Après avoir indiqué brièvement le principe du calcul de ces filtres, nous présenterons les résultats de leur application à des exemples théoriques, afin de mettre en évidence:ľ'influence du pas d'échantillonnage et de la longueur du filtre (possibilityé d'obtenir un filtrage efficace avec un opérateur comportant un petit nombre de termes),ľ'effet du filtrage sur les réflexions pentées (réduction d'amplitude et distorsion croissant avec le gradient temps),ľ'ouverture de ľ'éventail des réflexions courbes que ľ'on peut filtrer efficacement avec un même opérateur,ľ'influence perturbatrice de bruits inorganicés.

Notes: It was found in Part I of this paper that approximating the sharp cut-off frequency characteristic best in a mean square sense by an impulse response of finite length M produced a characteristic whose slope on a linear frequency scale was proportional to the length of impulse response, but whose maximum overshoot of ±9% was independent of this length (Gibbs' phenomenon). Weighting functions, based on frequency tapering or arbitrarily chosen, were used in Part II to modify the truncated impulse response of the sharp cut-off frequency characteristic, and thereby obtain a trade-off between the value of maximum overshoot and the sharpness of the resulting characteristic. These weighting functions, known as apodising functions, were dependent on the time-bandwidth product Mξ, where 2ξ, corresponded to the tapering range of frequencies.Part III now deals with digital filters where the number 2N–1 of coefficients is directly related to the finite length M of the continuous impulse response. The values of the filter coefficients are taken from the continuous impulse response at the sampling instants, and the resulting characteristic is approximately the same as that derived in Part II for the continuous finite length impulse response. Corresponding to known types of frequency tapering, we now specify a filter characteristic which is undefined in the tapering range, and determine the filter coefficients according to a mean square criterion over the rest of the frequency spectrum. The resulting characteristic is dependent on the time bandwidth product Mξ= (N–1/2)ξ up to a maximum value of 2, beyond which undesirable effects occur. This optimum partially specified characteristic is an improvement on the previous digital filters in terms of the trade-off ratio for values of maximum overshoot less than 1%. Similar to the previous optimum characteristic is the optimum partially specified weighted digital filter, where greater “emphasis is placed on reducing the value of maximum overshoot than of maximum undershoot”. Such characteristics are capable of providing better trade-off ratios than the other filters for maximum overshoots greater than 1/2%. However these filters have critical maximum numbers 2.NC–1 of coefficients, beyond which the resulting characteristics have unsuitable shapes. This type of characteristic differs from the others in not being a biassed odd function about its cut-off frequency.

Notes: In Part I of this paper, we examined the properties of the best mean square approximation to the sharp cut-off frequency characteristic by an impulse response of finite length. It was found that the sharpness of cut-off for the resulting frequency characteristic depended on the length of the impulse response–but because of the discontinuous nature of the specified frequency characteristic, this best mean square approximation always had a maximum overshoot of ± 9%, independent of the length of the impulse response (Gibbs phenomenon).In Part II, we investigate ways of reducing this ± 9% overshoot at the expense of a reduced sharpness of cut-off. The discontinuous frequency characteristic is first approximated by a continuous characteristic with linear or cosine frequency tapering. The impulse response for such tapered characteristics consists of the impulse response of the discontinuous frequency characteristic weighted by a certain function corresponding to the type of tapering employed. The best mean square approximation to the tapered characteristic by an impulse response of finite length M will produce a frequency characteristic whose properties are now dependent on the time-band width product Mζ, where 2ζ is the tapering range.A trade-off exists between the maximum overshoot and the sharpness of cut-off for the resulting characteristic for both forms of frequency tapering. Instead of considering other forms of tapering in the frequency domain, we now investigate arbitrarily chosen weighting functions in the time domain to determine the minimum length of impulse response for a minimum value of maximum overshoot and a maximum value of sharpness of cut-off.Part III will discuss the digital realization of the above finite length impulse responses together with the optimum partially specified digital filter approximation to the desired frequency characteristic.

Notes: Book reviewed in this article:Le Filtrage en Sismique, Tome IJ. AUBOUIN “Geosynclines” (Developments in Geotectonics 1). Elsevier Publishing CompanyEarth and Planetary Science Letters Vol. 1. Nr. 2H. Ramberg Gravity, Deformation and the Earth's Crust Academic Press“Potassium Argon Dating” Compiled by O. A. Schaeffer and J. Zähringer

Notes: Deep seismic sounding was performed along two profiles which cross at the Dinarides area right angles. One of the profiles goes far into the Adriatic Sea.Besides considerations on the lithophysical conditions, characteristics of the registered waves are analysed. The amplitude curves and curves of amplitude ratios are shown. Special attention was paid to the frequency of the registered waves.In order to obtain a better knowledge of the registered wave pattern three-component recordings of waves were carried out. The analysis of the records obtained is given, with particular regard to the possibility of creating converted waves.The Earth's crust structure along the profiles II and III is given.

Notes: Nomograms for solving equations in multilayer and dipping layer cases are presented. The nomograms constructed are used to solve the following equations: I. Intercept-time formula. 2. Critical distance formula. 3. Critical angle formula. 4. Critical angle and dip angle formula. 5. Vertical depth formula.

Notes: When, in a two-layer earth, the substratum is insulating or infinitely conducting, the thickness of the top layer can be determined from surface potential measurements along a radius from a single point power electrode. The observed potential needs to be numerically integrated in a direction perpendicular to the said radius, and Figure 4 can then be used to find the thickness. A field example is included.

Notes: In order to increase the seismic efficiency of the Sparker-system developments were made in 1966/67. Results illustrating the main steps of this development are discussed. A new type of electrode called Transploder electrode was field-tested and proved to be promising.

Notes: The theory of electrical dipole soundings proved that this method can produce resistivity measurements, which are comparable with those obtained by electrical soundings of the Wenner or Schlumberger type. Their main advantage is the use of short cable lengths, which is important if the depth of penetration should be large.A considerable disadvantage of the dipole method is the great sensitivity to lateral discontinuities. Though these have an influence on the Schlumberger arrangement as well, they can disturb a dipole sounding to such an extent than an interpretation based on a horizontal layer case is no more possible.There are six different dipole arrays, which differ from each other with respect to the angle enclosed by the two dipole orientations-the current dipole AB and the measuring dipole MN. The theoretical comparison of the dipole arrays with the Schlumberger array concerning their sensitivity to lateral discontinuities is a useful basis for the choice of the most suitable configuration.Considering geological subsurface conditions the right choice of a dipole array can give an optimal result, i.e. a dipole sounding for which the sensitivity to lateral discontinuities is as small as possible under the given circumstances.

Notes: Deconvolution and deringing are well known subjects and it is not necessary to state again their objectives nor the basical methods used to reach them. Let us just remember that, generally, among many others, the two following assumptions are made for simplification purposes:〈list xml:id="l1" style="plain"〉—for deconvolution, it is assumed that the recorded seismic signal is constant, meaning that its shape is the same all along the time interval during which the trace is to be deconvolved;—for de-ringing, it is assumed that the ringing period is constant and that the intensity of the ringing phenomenon is independant of the time.With these two assumptions, a single constant operator can be applied for deconvolving, deringing or both. In most cases, the time variations of the signal or of the ringing are small enough and the error resulting of the application of a constant operator is acceptable. It results into a slight increase of the noise level or into a small residual ringing in the processed trace.When this noise or the residual ringing are too important, the assumption of a constant signal and ringing period must be rejected. This is the case that is examined here according to the following steps:〈list xml:id="l2" style="plain"〉—short definition of the problem;—fast evaluation of some possible solutions;—the selected solution: resulting approximations and how to obviate them, computing method and a remark about the operators;—theoretical example: the efficiency of the process used is evaluated on data in which the results aimed at are known; the influence of the selection of numerical values to be assigned to the parameters is examined;—real cases: comparison of results obtained with the Protee process and with more conventional processes assuming a time invariance or including a weighted composition of several conventional processes each with a different operator.

Notes: Sharp cut-off frequency filtering is carried out in the discrete time domain on digital computers. A convolution of the digital filter impulse response with the sampled input yields the output. For practical reasons, the length of the filter inpulse response, corresponding to the number of filter coefficients, is limited, and consequently the resulting frequency characteristic will no longer be identical to that originally specified. This is analogous to synthesising some specified frequency characteristic with a finite number of resistive, capacitative and inductive components.In Part I of this paper, we examine the effect of approximating the sharp cut-off frequency characteristic best in a mean square sense by an impulse response of finite length. The resulting frequency characteristic corresponds to the truncated impulse response of the specified frequency characteristic. It has a cut-off slope proportional to, and a mean square error inversely proportional to, the length of the impulse response, and is a biassed odd function about the cut-off frequency point. Because of the Gibbs phenomenon for discontinuous functions, the resulting frequency characteristic will always have a maximum overshoot with respect to the specified characteristic of ± 9%, regardless of the length of the corresponding impulse response. Equal length truncated impulse responses of specified filters with different cut-off frequencies yield frequency characteristics which are almost identical about their respective cut-off points. Now on a log frequency scale (as against a linear frequency scale implied previously) such characteristics may be made almost identical about the respective cut-off points by having the truncated impulse responses composed of an equal number of zero crossings. Results for the low-pass filter are applicable to the high-pass and band-pass characteristics.In the latter case, the mean square error is double that for a single slope characteristic (low-pass or high-pass) and the slopes at both edges of the passband are approximately equal in magnitude to the length of the impulse response (linear frequency scale).Part II of this paper is concerned with reducing the ± 9% overshoot that results from the discontinuous nature of the sharp cut-off frequency characteristic and which is not dependent on the length of the truncated impulse response. The reduction is achieved, at the expense of the steepness of cut-off for the resulting frequency characteristic, by the use of functions which weight the truncated impulse response of the specified frequency characteristic. These functions are called apodising functions. Among other variables, the length of the truncated weighted impulse response will determine the amount of maximum overshoot since the effective frequency characteristic being approximated is no longer a discontinuous function. The digital realization of the finite length impulse responses of Parts I and II is discussed in Part III, together with the optimum partially specified digital filter approximation to the desired frequency characteristic.

Notes: The purpose of this report is to show a method of determining the top of a refractor departing from the times and slopes of the direct and inverse dromocrones. The method does not need topographical correction and can be applied without knowledge of the distance between the geophone and the shot point.These results having been obtained, the commonly accepted point of view is upset: instead of looking for two points on the surface corresponding to one point of the refractor, we try to etablish, starting with only one point from the surface, the two corresponding points from the top of the refractor.This method can be applied to isolated points and does not demand interpretative hypotheses of any kind, excluding the velocity evaluation of the overburden and of the refractor.The necessary calculations can be easily executed by means of a digital computer to which the dromocrone times and the distances between the geophones must be given. These calculations can also be executed by a person having no knowledge of refraction seismology.This report also examines the validity of the approximations involved in the method proposed.

Notes: Determining the shape of a pulse generated by an explosion solely from the data provided by the recorded seismic trace is a difficult and even ambitious task.Knowledge of parameters such as length and number of “arches” of the pulse under study is, in fact, indispensable in solving this problem.These parameters cannot be found directly in the seismic trace, which nevertheless contains a great amount of information. Autocorrelation, with its mathematical and statistical properties, is an efficient way of making the best of this information.We compute all the autocorrelations of reflections having a given number of arches which fulfil certain conditions determined in advance. Then, after statistical testing of some parameters pertaining to the autocorrelations (abcissae of zeros, of extrema …), we select only those with a maximum likelihood. It is sufficient to consider only the reflections whose autocorrelations have been selected and to arrange them in groups according to their shape and arch number in order to obtain average pulses.In so doing several solutions are arrived at, but when considering a given number of traces, a single record for instance, it is possible by comparing these results with each other to considerably reduce their number.In the last part of the paper the nature of the impulse obtained with our method is examined in order to find out whether it is “minimum phase” for carrying out deconvolutions.

Notes: In recent years considerable work has been done to devise a satisfactory non-dynamite seismic system that would replace dynamite in offshore areas. Prior to the advent of digital recording and processing, the non-dynamite sources have generally not provided the depth of penetration or the resolution required for satisfactory seismic interpretation.More recent developments in non-dynamite offshore marine sources include adaptation of the Vibroseis from a land unit to a marine unit, and adaptation of the Dinoseis unit from a land to a marine unit. The SUE (Seismic Underwater Explorer) system is a thermodynamic non-dynamite source utilizing a mixture of propane and oxygen detonated in a special chamber approximately 15 feet below the water surface. This source gives penetration to more than 4 sec in areas typified by Gulf of Mexico type geology and shows deeper penetration than had previously been obtained by dynamite along the western United States in areas with 20 lb charge limitations. A pneumatic source, the airgun, has been in production use in the United States since June 1966. This non-dynamite source provides an intriguing amount of versatility and can be expanded to provide additional energy as necessary to obtain the penetration desired. Tests using systems comprised of from eight to twenty-three airguns show penetration in excess of 5 seconds in many areas. Power spectra comparisons both in amplitude and frequency content demonstrate that this is a controlled source generating a controlled seismic wavelet and a controlled frequency spectrum that can be tailored to fit requirements of particular areas. Sample sections obtained in the Gulf of Mexico and the Pacific Ocean offshore California show adequate penetration to 5.0 seconds reflection time.Quantitative measurements with the airguns demonstrate the effect of:〈list xml:id="l1" style="custom"〉1Variation of the number of guns in the system;2Shaping the frequency spectrum by using different sizes of airguns in the system;3Effects on signal-to-noise ratios as a result of stacking several small energy sources together;4Reproducibility of the initial pulse wavelet from shot to shot.The improvement in record quality as a result of advanced digital processing with non-dynamite sources is comparable to that obtained with dynamite sources. Non-dynamite sources make additional improvements possible where high source multiplicity is advantageous. Excellent dynamic correlations yield accurate velocity control as well as definitions of apparent velocities attributable to multiples and primary-to-multiple amplitude relationships.Non-dynamite sources are being used more and more extensively in offshore exploration. The advent of digital recording and processing provides a means for improving depth of penetration and resolution of many non-dynamite sources.

Notes: A number of experiments are reported in which comparisons were made, using calves, or ewes and lambs, between Tetila Tetrone and S22 or Danish Italian rye-grasses or between Reveille and S24 perennial ryegrasses.In general, the differences over the whole growing season were not large, but grazing experiments with calves during 1963-5 all showed that a substantial advantage in live-weight gain, can be obtained in the later part of the grazing season (July to September) by using T. Tetrone rather than S22 or Danish Italian ryegrasses.

Notes: By controlling the high populations of leatherjackets in two experimental leys it was shown that the loss of grass from this pest could be heavy. The most serious loss occurs in early summer. As soon as the larvae cease feeding in mid-June recovery begins and subsequent growth is satisfactory. Clover is damaged more heavily than grasses, but recovers completely by early autumn. The implications of these experiments are discussed.

Notes: Two experiments are described in which data were collected on yield, floral characteristics and winter greenness of a number of indigenous hill grass species. Differential cutting treatments, besides affecting total yield, affected yield and floral vigour in the subsequent year. Differences in sensitivity to cutting were present among the species. The date at which the grasses were last cut in autumn affected their winter greenness though responses differed among species. The significance of these results in relation to performance and management of hill pastures is discussed.

Notes: The growth curves of closed grassland swards obtained during the growing seasons of six successive years were compared with each other and with theoretical growth rates calculated by de Wit's method and based on the mean light energy input data for the same years. The form of the growth curve consisted of a period with a constant rate, lasting for 6–7 weeks in May-June, then rapidly shortening to 3 weeks in August-September, after which there was a rather abrupt change to zero values. A comparison with theoretical values showed that a period of constant growth rate was possible, because the promoting influence of increasing LAI counteracted the effect of increasing respiration. Before the longest day this period was lengthened by an increasing daylength; thereafter the reverse was found. There is no ready explanation for the sudden decline to zero values. This is thought to be associated with changes in the rate of photosynthesis.

Notes: In two experiments the growth of clover undersown to wheat was linearly related to the amount of light available. There were strong indications that clover growth and light within N.-S. rows were superior to those within E.-W. rows of wheat, and within N.-S. rows, those along the middle position were superior to others. The large difference between the growth of clover sown alone and with wheat indicated that beneath wheat the clover suffered from competition for other factors, probably soil moisture, which was even greater than that for light. Beneath wheat at the reduced level of growth there was a positive linear relationship between yield of clover and available light.

Notes: Two pot experiments were carried out in a semi-controlled environment to examine the response of individual plants to competitive stress in simple systems incorporating varying cutting frequencies and soil–nitrogen levels. A third experiment was set up outdoors to examine the effect of competition on individuals in an association, on the association as a whole, and to extend the controlled environment studies to a more complex model involving micro-plots. Phalaris coerulescens, although its seedlings possessed a high competitive ability, showed a dramatic decline in competitive ability in later stages of the association, this decline being associated with extensive floral development. In micro–plots the effect of competition was so severe as to prevent the expression of seasonal growth characteristics by P. coerulescens.Considerable inter-specific differences existed in the response to competition of leaf-area production per tiller during periods of regrowth.Whilst P. coerulescens remained highly productive and maintained a dense tiller population in monocultures, its tiller regeneration following flowering was severely suppressed in competition with vegetative plants of HI ryegrass or Festuca arundinacea.The number of heads produced per plant, head length and time of head emergence were all affected by competitive stress, the former response being a reflection of the relative competitive abilities at the time of floral initiation. The response of the latter two characters reflected the decline in competitive ability which occurred during later stages of the growth and development of P. coerulescens.

Notes: The use of lime and phosphates in reclaiming heather moorland was investigated in two experiments.Large initial dressings of hme resulted in a rapid rise in pH. An initial dressing of 9 tons CaCO3/ac resulted in a more rapid rise to pH 6 than did 6 tons/ac and the soil was maintained above pH 6 for a longer period. Three annual dressings of 3 tons/ac gave a slower rise in pH and a longer period above pH 6. Split treatments, half before and half after the first ploughing, gave no long–term advantage where a programme of pioneer cropping was being followed.Basic slag and North African phosphate were as effective as superphosphate for root crops at low pH values. Basic slag was as effective as superphosphate for grassland establishment and gave a greater rise in soil phosphate. North African phosphate was virtually worthless as a source of phosphate for establishing grasses and clovers, and gave a negligible rise in soil phosphate.Given adequate supphes of lime and phosphate, frequent small apphcations of N over the first 2 or 3 years are vital to the success of a reclamation programme under the conditions described.

Notes: There was a marked increase in basal cover of veld grasses after the first 2 to 3 years of cutting, and this effect continued over a period of 9 years. Short grasses, such as Cynodon dactylon and Heteropogon contortus, increased at the expense of tall tussock grasses, such as Hyparrhenia dissoluta.

Notes: Two experiments were established to compare the effect on the yield of continuously cut herbage of varying amounts of potassium fertilizer applied either in one large dose to the seedbed, or as 3 equal dressings applied to the seedbed and in the summer of the 2 following years. Responses in dry–matter yield were recorded up to the higher rates of potassium fertilizer applied. Establishment and yield in the first 12 months were improved by seedbed applications of up to 4 cwt/ac of muriate of potash (60% K2O). Although total yields over the whole period were similar, whether the potassium was applied to the seedbed only or in annual dressings, yields from “all–in–seedbed” dressings declined towards the end of the period. Soil analysis indicated that annual dressings left behind higher residues of K.

Notes: During the winter months of 1963 and 1964, mature non–pregnant Clun Forest ewes at pasture were equipped with pedometers to study the value of these instruments for measuring distances walked, and to investigate the importance of weather on the distances travelled. Approximately 80 periods were recorded, each of about 24 hours. The accuracy of the measurements was checked by using a rangemeter and it was found that the reliabihty of pedometer records must be assessed on the animal from which they are obtained. The individual characteristics of the pedometers and/or the sheep gave rise to inaccurate records from about 50% of the instruments studied.Multiple regression analysis of data for each of the three sheep which provided suitable records revealed that, in dry weather, the average distance walked per hour of recording period increased signiJBcantly with mean air temperature in one case and with hours of bright sunshine in another. Wind–speed effects were unimportant. The distance walked by all three sheep increased significantly with hours of daylight per recording period, and this was the only variable found to affect distance walked in wet weather. Differences between average distances walked per hour under dry–and wet–conditions were non–significant.It is concluded that for measuring the distances walked by sheep, the disadvantages of the pedometer outweigh its advantages.

Notes: Methods of testing grass varieties are discussed and the efifects of differences in management and of nitrogen fertilizer on quality are shown. In a grazing-management system with 9 cuts per season, cocksfoot was higher than perennial ryegrass in protein and fibre and lower in soluble-carbohydrate content and in vitro dry-matter digestibility throughout the season. All species showed the lowest value for digestibility in August.Curves for digestibility in primary growth were plotted for 4 varieties of ryegrass for leaf and stem fractions. The tetraploid variety Reveille was slightly more digestible than S24 in leaf and stem throughout the period, while at ear emergence S23 was lower in digestibility in both fractions than S24.There were significant differenees in composition and digestibility between experimental centres, but relative differences between varieties were consistent. The level of N fertilizer did not materially alter the comparison between varieties in quality data.

Notes: A series of experiments in eastern Scotland, carried out over a 7–year period, on the application of N fertilizers to Italian ryegrass for producing early spring grass, indicated that maximum yields are likely to be produced if the fertilizer is applied not later than the middle of March in most seasons. Only rarely did application in February result in a loss of N and in reduced herbage yields. Italian ryegrass appears to be able to make some growth at temperatures below 40†F.Increasing the rate of N application resulted in increased DM yield, the response averaging 9–4 lb DM per lb N. Herbage N concentration was increased by the additional N fertilizer. Nitro–chalk and ammonium sulphate were equally effective in producing early grass, irrespective of application date.

Notes: The treatments in this summer–grazing experiment were designed as a 2 × 3 factorial, there being two levels of nitrogenous fertilizer (nitro–chalk), supplying 0 and 336kg of N/ha per annum (NO and N3, respectively) and three stocking rates. The fertilizer was applied in 7 dressings at approximately three–weekly intervals. The animals used were Hereford x Friesian steers; these were slaughtered at the end of the grazing season. The stocking rates were calculated on the basis of expected herbage production. The experiment was laid out in 6 randomized blocks which were grazed in rotation. Two blocks were cut for conservation before grazing each year; up to the end of June only 4 blocks were used for grazing.There was little contamination of the swards with unsown species. With the NO swards the clover contents declined each year, but remained fairly high at over 20% in 1965. Clover contents also declined each year in the N3 swards and by 1965 were only 2 to 4%.The quantities of herbage cut for conservation were higher from the swards receiving N. The live–weight gains of the cattle (per head) were higher at the lower stocking rates, the effect of stocking rate being more noticeable in the July to Oct. period. Live–weight gains per ha increased at the higher stocking rates. In 1963 and 1965, as stocking rates increased carcass weights per animal decreased and carcass quality, as indicated by the commercial grades, was poorer. In 1964, a dry spell from July to Oct. necessitated the removal of cattle from the experiment and the effects of treatment on carcass weight and quality were not apparent.

Notes: Book reviewed in this article:BAKER, R. D., SPEDDING, A. W., KILKENNY, J. B. and TAYLER, J. C. An intensive system of beef production from grassland, using autumn-born calves from the dairy herd.M.A.F.F. At the farmer's service, 1967-8.M.A.F.F. Aspects of dairy economics, 1962-1965.DAVIES, WILLIAM. [The grasslands of Spain.]DIVISION OF PLANT INDUSTRY, CSIRO. Australian herbage plant register.

Notes: The effects were studied of nitrogen and phosphorus fertilizers on the production of perennial ryegrass at high altitudes in Kenya. N had little influence on production during establishment but increased it markedly during the second and third years. The effect of P was less and was related to the amount of N applied. The response to applied N in terms of dry matter production, and the recovery of the N applied, compared favourably with data from trials elsewhere. It is apparent from the results that temperate grasses can be productive at high altitudes in Kenya and provide a considerable potential for pasture production.

Notes: As a preliminary step in the development of improved bred varieties an examination has been made of the factors which contribute to the success or failure of white clover (Trifolium repens) in hill land reseeding. Severe restrictions are placed on clover performance and N fixation in many hill areas in Britain by the poor climate, the low pH and exchangeable base status of the soils and the low frequency of effective indigenous Rhizobium strains.Agronomic solutions to some of these problems exist, but experience in mid-Wales suggests the need for new bred varieties with improved adaptation to the prevailing conditions, particular attention being directed to the limitation of N fixation by low soil temperature.

Notes: The use of MKS system units in preference to the cgs system facilitates accurate numerical calculation in magnetostatic problems in geophysics and the practice of stating the precise dimensions of every unit guards against confusion. Suggestions are made for the unique definition of quantities such as magnetic potential, etc. for which the undesirable circumstance of arbitrary alternatives still persists.

Notes: The Fourier transform formula for a two-dimensional fault truncating a horizontal bed at an arbitrary angle of inclination is derived. The amplitude spectrum of the Fourier transform is found to give information about the depth to the top of the upper part of the faulted bed and the inclination of the fault-plane. Under suitable conditions the thickness and the displacement of the bed involved can be obtained. With actual field data, these transforms can be obtained at discrete points by a Fourier analysis of the gravity anomaly. A field example from the Logan fault area near Montreal, Que., Canada, is given.

Notes: Die Interpretation magnetischer Anomalien durch Modellkörper geschieht bevorzugt nach der indirekten Methode (trial und error). Dieses von Hand aufwendige Verfahren läβt sich mit Hilfe der Ausgleichsrechnung nach der Methode der kleinsten Quadrate Rechenautomaten übertragen.Die allgemeinen Grundlagen des Verfahrens werden beschrieben. Wesentliche Voraus-setzungen sind:〈list xml:id="l1" style="custom"〉1)die Annahme bestimmter Körperformen2)das Vorhandensein von Näherungswerten der Unbekannten (Lage, Magnetisierung etc.)3)eine genügend groβe Anzahl von Meβwerten, um den Ausgleichsprozeβ durchführen zu können.Die Vorteile der Methode sind:〈list xml:id="l2" style="custom"〉1)weitgehende Automatisierung und schnelle Arbeitsweise bei Verwendung von Rechenautomaten2)Ermittlung der Fehler der UnbekanntenDie Methode wurde angewandt auf die Interpretation 2-dimensionaler ΔZ- und ΔT-Anomalien. Drei Körpertypen werden dem Rechenprogramm zugrunde gelegt, und zwar die unendliche und endliche diinne Platte und der Kreiszylinder. In die Maschine ein-gegeben werden nur die Meβwerte. Die Interpretation erfolgt im einzelnen in folgenden Schritten:〈list xml:id="l3" style="custom"〉1)Ermittlung von Näherungswerten2)Bestimmung der Körper bester Annäherung3)Iteration für den Körper bester Annäherung.Die Maschine gibt die Endwerte der Unbekannten (Lage, Einfallen, Magnetisierung etc.) mit Angabe der mittleren Fehler sowie die hierzu gehörigen Modellanomalien aus. Diese Endwerte werden einem Zeichenautomaten übergeben, der die gemessene Kurve, die theoretische Kurve und die gesuchten Modellkorper zeichnet.Interpretationsbeispiele werden vorgeführt.

Notes: The auto-correlation function of a seismic trace contains information on all the multiple reflection activity present in the trace.The interpretation of this information is facilitated by the arrangement of autocorrelation functions in cross-sectional form, in the manner of a normal record section. This is the concept of the Sectional Auto-Correlogram.Specifically, the Sectional Auto-Correlogram will…Show if the record section does not include significant multiples, thus allowing confident picking of the primary reflections.Show if the record section does include significant multiples, giving their travel times and inclinations (and, under certain circumstances, their reflection coefficients).Indicate by what process the multiples should be treated.Yield an authoritative measure of the success of a multiple-attenuating treatment.Delineate shallow horizons, even those whose primary reflections are too early to be recorded satisfactorily.Give the true travel time of a primary reflector, and the sign of its reflection coefficient.The Sectional Auto-Correlogram allows the study of primary reflectors by consideration of the multiples generated by them, and in this sense may be said to turn multiple reflections to advantage. Thus a primary reflection at a certain time is defined if we find that every reflection on the record is followed by a multiple after this certain time. Alternatively, a primary reflection at a certain time is defined if, after that certain time, we can find a repetition of the entire record.The Sectional Auto-Correlogram also has secondary uses in fault identification, crustal studies and weathering problems.

Notes: The development of optically pumped and monitored “atomic” magnetometers has allowed the application of greater resolution in geomagnetic measurements for exploration purposes. This paper presents a survey of instrumentation in use, the variety of exploration techniques that are being used in practice, and an estimate of their state of development.Alkali metals (rubidium and cesium) and helium have been used as active elements to obtain the magnetic-field dependent Larmor frequency. Each of these instruments is capable of obtaining high resolution data (data with sensitivity numerically smaller than one-tenth gamma). They have been adapted for airborne, land, and marine usage.Such sensitivity has enabled the rapid development of geomagnetic gradiometers, high sensitivity aeromagnetics, diurnally reduced ground surveys, broad-band magneto-telluric surveys, susceptibility measurements, and convenient magnetic search and location techniques. Outlines of each procedure and an example of its application are given.