ISSN:
0947-5117
Keywords:
Chemistry
;
Polymer and Materials Science
Source:
Wiley InterScience Backfile Collection 1832-2000
Topics:
Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
Description / Table of Contents:
Anodic and cathodic polarisation phenomena with the inhibition of the acid corrosion of ironIt is shown that the inhibitors are primarily adsorbed or chemically fixed by the local anodes, and only later by the local cathodes. These phenomena are exclusively governed by the energy conditions on the metal surface, and not by the sign of the inhibitor particles. The adsorption takes place in two phases as it were. Good inhibitors show, apart from higher ohmic resistances, stronger anodic and cathodic polarisations. If the adsorption happens to take place, predominantly, at the local anode, the inhibiting effects and film resistances are lower. A high film resistance is always associated with a stronger cathodic polarisation. Poor inhibitors do not survive the first phase of adsorption to the local anodes. With good inhibitors, however, this phase is overcome very soon, and even with very low concentrations of approx. 0.01 gram per litre and over. The phenomena at the local anode are retarded by the blocking of the active centres whilst those at the local cathode are slowed down or arrested by a coherent layer of the inhibitor of higher ohmic resistance.
Notes:
Es wird gezeigt, daß die Inhibitoren primär an den Lokalanoden und dann erst an den Lokalkathoden adsorbiert oder chemisorbiert werden. Für diese Vorgänge sind nur die energetischen Verhältnisse an der Metalloberfläche, nicht aber der Ladungssinn der Inhibitionsteilchen maßgeblich. Die Adsorption geht gleichsam in zwei Stufen vor sich. Gute Inhibitoren zeigen neben höheren Ohmschen Widerstdänden auch stärkere anodische und kathodische Polarisationen. Erfolgt die Adsorption vorwiegend an der Lokalanode, dann treten nur niedrige Hemmungswirkungen und Filmwiderstände auf. Einem hohen Filmwiderstand entspricht stets auch eine stärkere kathodische Polarisation. Schlechte Inhibitoren kommen über das erste Stadium der Adsorption an den Lokalanoden nicht hinaus, bei guten wird dieses Stadium jedoch bald und bereits bei sehr niedrigen Konzentrationen von mehr als etwa 0,01 g/l überschritten. Die Vorgänge an der Lokalanode werden durch Blockierung der aktiven Zentren gehemmt, während jene an der Lokalkathode durch eine zusammenhängende Schicht des Inhibitors höheren Ohmschen Widerstandes verlangsamt oder zum Stillstand gebracht werden.
Additional Material:
10 Ill.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1002/maco.19600110306
Permalink