ALBERT

Description: In general, the complex electrical resistivity in the subsurface is anisotropic. Despite this, algorithms for the tomographic inversion of complex resistivity data commonly assume isotropy, mainly due to the lack of anisotropic modelling and inversion schemes, potentially leading to artefacts in the inversion results in the presence of anisotropy. The development of an effective anisotropic complex resistivity inversion algorithm which utilizes the gradient information of some cost function benefits from understanding the characteristics of the problem's sensitivities, that is, the partial derivative of the impedance forward response with respect to the complex conductivities in the different spatial directions, as well as with respect to the different ratios of complex conductivities, that is, the different anisotropy ratios. We here derive expressions for these sensitivities and, based on a 2.5-D finite-element modelling algorithm, we compute and discuss sensitivity distributions as well as measurement response curves of typical surface and cross-borehole measurement configurations for 2-D subsurface anisotropic complex resistivity distributions. Depending on the electrode layout and measurement configuration, the sensitivity with respect to the conductivity in a particular direction shows a unique pattern, while for other directions sensitivity patterns are qualitatively similar. These sensitivity characteristics translate into important equivalences between impedance responses of local anisotropic and isotropic anomalies, for both magnitude and phase. Accordingly, with collinear surface arrays only the complex conductivity in the direction of the electrode layout can be unambiguously resolved, and with cross-borehole arrays only the conductivity in the vertical direction, provided an in-hole current injection is used. Nevertheless, anisotropy ratios involving these resolvable conductivity components are likewise detectable. The distinct shape of the measurement response curves, reflecting the distinct spatial patterns of the corresponding sensitivity distributions, suggest that optimized measurement configurations can be inferred for specific exploration questions involving electrical anisotropy and given electrode layouts. The gained insight into the characteristics of the sensitivity distributions of complex resistivity measurements in case of subsurface anisotropy should guide the implementation of effective anisotropic complex resistivity inversion schemes and lead to a routine use of such schemes in any resistivity and induced polarization surveys whenever subsurface electrical anisotropy could be encountered.

Description: The streaming potential phenomenon is an electrokinetic effect that occurs in porous media. It is characterized by an electrokinetic (EK) coefficient. The aim of this paper is to simulate the EK coefficient in unsaturated conditions using the Lattice Boltzmann method in a 2-D capillary channel. The multiphase flow is simulated with the model of Shan & Chen. The Poisson–Boltzmann equation is solved by implementing the model of Chai & Shi. The streaming potential response shows a non-monotonous behaviour due to the combination of the increase of charge density and decrease of flow velocity with decreasing water saturation. Using a potential of –20 mV at the air–water interface, an enhancement of a factor 5–30 of the EK coefficient, compared to the saturated state, can be observed due to the positive charge excess at this interface which is magnified by the fluid velocity away from the rock surface. This enhancement is correlated to the fractioning of the bubbles, and to the dynamic state of these bubbles, moving or entrapped in the crevices of the channel.

Description: By introducing two types of zenith troposphere delay (ZTD) products in precise point positioning (PPP), we developed the ZTD-corrected PPP and the ZTD-constrained PPP, both of them reduced the PPP convergence time. Both enhanced PPP methods are examined by global empirical ZTD models and regional ZTD corrections. For global ZTD models, we verified that ZTD-corrected PPP will deviate the positioning results, while ZTD-constrained PPP could produce unbiased estimations. Therefore, the latter is utilized to study the performance of global ZTD models (ITG, GPT2w, GZTD and UNB3m). After numerous experiments, we found that the performance of ZTD models was positively related to the real ZTD accuracy, and we proposed a universal tropospheric stochastic model 2SQR(9rms) which denotes double the square of nine times ZTD rms, to constrain ZTD in PPP. The proposed model subsequently was validated by real-time static and kinematic ZTD-constrained PPP on the premise that the ZTD rms on every station was known. Compared with traditional PPP, in static PPP, the number of improved stations is increased by 15.5 per cent (ITG), 14.4 per cent (GPT2w), 11.1 per cent (GZTD) and 8.3 per cent (UNB3m). For kinematic PPP, PPP constrained by ITG model still had the best performance, the number of improved stations is increased by 14.4 per cent, after 30 min of initialization time, 13.4 cm east, 13.4 cm north and 11.7 cm up positioning accuracy was obtained, compared with 15.3 cm east, 15.3 cm north and 14.3 cm up accuracy by traditional PPP. In addition, experiments using regional ZTD corrections to enhance real-time PPP showed that both ZTD-corrected PPP and ZTD-constrained PPP can notably reduce the convergence time on the vertical component (within 15 cm).

Description: Animal-associated microbiotas form complex communities, which play crucial functions for their host, including susceptibility to infections. Despite increasing attention to bats as reservoirs of zoonotic pathogens, their microbiota is poorly documented, especially for samples potentially implicated in pathogen transmission such as urine and saliva. Here, using low-biomass individual samples, we examined the composition and structure of bacterial communities excreted by insectivorous bats, focusing on three body habitats (saliva, urine and faeces). We show that niche specialisation occurs as bacterial community composition was distinct across body habitats with the majority of phylotypes being body habitat specific. Our results suggest that urine harbours more diverse bacterial communities than saliva and faeces and reveal potentially zoonotic bacteria such as Leptospira , Rickettsia , Bartonella and Coxiella in all body habitats. Our study emphasised that, in addition to the traditional use of gut-associated samples such as faeces, both urine and saliva are also of interest because of their diverse microbiota and the potential transmission of pathogenic bacteria. Our results represent a critical baseline for future studies investigating the interactions between microbiota and infection dynamics in bats.

Description: R-type bacteriocins are contractile phage tail-like structures that are bactericidal towards related bacterial species. The C-terminal region of the phage tail fiber protein determines target-binding specificity. The mutualistic bacteria Xenorhabdus nematophila and X. bovienii produce R-type bacteriocins (xenorhabdicins) that are selectively active against different Xenorhabdus species. We analyzed the P2-type remnant prophage clusters in draft sequences of nine strains of X. bovienii . The C-terminal tail fiber region in each of the respective strains was unique and consisted of mosaics of modular units. The region between the main tail fiber gene ( xbpH1 ) and the sheath gene ( xbpS1 ) contained a variable number of modules encoding tail fiber fragments. DNA inversion and module exchange between strains was involved in generating tail fiber diversity. Xenorhabdicin-enriched fractions from three different X. bovienii strains isolated from the same nematode species displayed distinct activities against each other. In one set of strains, the strain that produced highly active xenorhabdicin was able to eliminate a sensitive strain. In contrast, xenorhabdicin activity was not a determining factor in the competitive fitness of a second set of strains. These findings suggest that related strains of X. bovienii use xenorhabdicin and additional antagonistic molecules to compete against each other.

Description: Anabaena PCC7120 has two annotated toxin–antitoxin systems: MazEF and HicAB. Overexpression of either of the toxins severely inhibited the growth of Escherichia coli BL21(p lysS )(DE3). Of the two Anabaena toxins, MazF exhibited higher toxicity than HicA as evidenced by (i) 100-fold lower viability upon overexpression of MazF compared to HicA; (ii) complete loss of cell viability within 1 h of induction of MazF expression, as against 〉10 3 colony forming units mL –1 in case of HicA; (iii) inability to maintain the MazF overexpressing plasmid in E. coli cells; and (iv) neutralisation of the toxin was effective at the molar ratio of 1:1.9 for MazF:MazE and 13:1 for HicA:HicB, indicating higher antitoxin requirement for neutralisation of MazF. The growth inhibitory effect of MazF was found to be higher in lag phase cultures compared to mid-logarithmic phase cultures of E. coli , while the reverse was true for HicA. The results suggest possible distinct roles for MazEF and HicAB systems of Anabaena .

Description: We study fluctuations in the degree-2 zonal spherical harmonic coefficient of the Earth's gravity potential, C 20 , over the period 2003–2015. This coefficient is related to the Earth's oblateness and studying its temporal variations, C 20 , can be used to monitor large-scale mass movements between high and low latitude regions. We examine C 20 inferred from six different sources, including satellite laser ranging (SLR), GRACE and global geophysical fluids models. We further include estimates that we derive from measured variations in the length-of-day (LOD), from the inversion of global crustal displacements as measured by GPS, as well as from the combination of GRACE and the output of an ocean model as described by Sun et al. We apply a sequence of trend and seasonal moving average filters to the different time-series in order to decompose them into an interannual, a seasonal and an intraseasonal component. We then perform a comparison analysis for each component, and we further estimate the noise level contained in the different series using an extended version of the three-cornered-hat method. For the seasonal component, we generally obtain a very good agreement between the different sources, and except for the LOD-derived series, we find that over 90 per cent of the variance in the seasonal components can be explained by the sum of an annual and semiannual oscillation of constant amplitudes and phases, indicating that the seasonal pattern is stable over the considered time period. High consistency between the different estimates is also observed for the intraseasonal component, except for the solution from GRACE, which is known to be affected by a strong tide-like alias with a period of about 161 d. Estimated interannual components from the different sources are generally in agreement with each other, although estimates from GRACE and LOD present some discrepancies. Slight deviations are further observed for the estimate from the geophysical models, likely to be related to the omission of polar ice and groundwater changes in the model combination we use. On the other hand, these processes do not seem to play an important role at seasonal and shorter timescales, as the sum of modelled atmospheric, oceanic and hydrological effects effectively explains the observed C 20 variations at those scales. We generally obtain very good results for the solution from SLR, and we confirm that this well-established technique accurately tracks changes in C 20 . Good agreement is further observed for the estimate from the GPS inversion, showing that this indirect method is successful in capturing fluctuations in C 20 on scales ranging from intra- to interannual. Obtaining accurate estimates from LOD, however, remains a challenging task and more reliable models of atmospheric wind fields are needed in order to obtain high-quality C 20 , in particular at the seasonal scale. The combination of GRACE data and the output of an ocean model appears to be a promising approach, particularly since corresponding C 20 is not affected by tide-like aliases, and generally gives better results than the solution from GRACE, which still seems to be of rather poor quality.

Description: Joint inversion that simultaneously inverts multiple geophysical data sets to recover a common Earth model is increasingly being applied to exploration problems. Petrophysical data can serve as an effective constraint to link different physical property models in such inversions. There are two challenges, among others, associated with the petrophysical approach to joint inversion. One is related to the multimodality of petrophysical data because there often exist more than one relationship between different physical properties in a region of study. The other challenge arises from the fact that petrophysical relationships have different characteristics and can exhibit point, linear, quadratic, or exponential forms in a crossplot. The fuzzy c-means (FCM) clustering technique is effective in tackling the first challenge and has been applied successfully. We focus on the second challenge in this paper and develop a joint inversion method based on variations of the FCM clustering technique. To account for the specific shapes of petrophysical relationships, we introduce several different fuzzy clustering algorithms that are capable of handling different shapes of petrophysical relationships. We present two synthetic and one field data examples and demonstrate that, by choosing appropriate distance measures for the clustering component in the joint inversion algorithm, the proposed joint inversion method provides an effective means of handling common petrophysical situations we encounter in practice. The jointly inverted models have both enhanced structural similarity and increased petrophysical correlation, and better represent the subsurface in the spatial domain and the parameter domain of physical properties.

Description: Despite the extensive use of  Saccharomyces cerevisiae  as a platform for synthetic biology, strain engineering remains slow and laborious. Here, we employ CRISPR/Cas9 technology to build a cloning-free toolkit that addresses commonly encountered obstacles in metabolic engineering, including chromosomal integration locus and promoter selection, as well as protein localization and solubility. The toolkit includes 23 Cas9-sgRNA plasmids, 37 promoters of various strengths and temporal expression profiles, and 10 protein-localization, degradation and solubility tags. We facilitated the use of these parts via a web-based tool, that automates the generation of DNA fragments for integration. Our system builds upon existing gene editing methods in the thoroughness with which the parts are standardized and characterized, the types and number of parts available and the ease with which our methodology can be used to perform genetic edits in yeast. We demonstrated the applicability of this toolkit by optimizing the expression of a challenging but industrially important enzyme, taxadiene synthase (TXS). This approach enabled us to diagnose an issue with TXS solubility, the resolution of which yielded a 25-fold improvement in taxadiene production.

Description: Coal seam fires are a worldwide disaster of both ecological and economic importance. Their remote detection from the ground surface or using airborne techniques is required for developing efficient strategies to extinguish them. We investigate here the use of time-domain-induced polarization to localize coal seam fires. For laboratory experiments, we first introduce a modified time-domain-induced polarization methodology to quickly acquire and invert the secondary voltage distribution mapped after the shutdown of the primary current. A set of sandbox experiments is conducted in which coal is embedded into humidified sand. Raw coal alone generates significant induced polarization anomalies, above those shown by the sand. Even higher induced polarization anomalies are detected in presence of a coal seam fire. We postulate that the higher chargeability is due to the pyrolysis, which may enhance electronic polarization or the polarization associated with the cation exchange capacity (CEC) of the material. The position of the coal seam fire is well recovered inside the tank by inverting the secondary voltages in term of a source current density distribution. We also collected field data over a recognized coal seam fire in Colorado, USA. A chargeability anomaly (~800 mV V –1 ) and a resistivity anomaly (~1 Ohm m) are observed at the position of the coal seam fire. We propose a normalized burning front index (a scaled normalized chargeability) to image and localize, without ambiguity, the position of the coal seam fire in the subsurface. The 3-D reconstructed target is located below a negative self-potential anomaly (similarly to what is observed in laboratory experiments) and a temperature anomaly recorded at a depth of 30 cm.

Description: Rock permeability is an important parameter for the formation evaluation. In this paper, a new method with streaming current is proposed to determine the sample permeability based on the electrokinetic effects, and is proved by the experimental measurements. Corresponding to this method, we have designed an experimental setup and a test system, then performed the streaming current (potential) and electro-osmosis pressure experiments with 23 sandstone samples at 0.05 mol l –1 NaCl solution. The streaming current (potential) coefficient and electro-osmosis pressure coefficient are obtained, respectively, with the experimental data at low frequencies with AC lock-in technique. The electrokinetic permeabilities are further calculated with these coefficients. The results are consistent well with the gas permeability measured with Darcy's law, which verifies the current method for estimating rock permeability. Our measurements are also analysed and compared with previous measurements. The results indicate that our method can reflect the essence of electrokinetic effects better and simplify the electrokinetic measurements as well. In addition, we discuss the influences of experimental artefacts (core holder and confining pressure installation) on the electrokinetic data. The results show that the trough phenomenon, appeared in frequency curves of streaming current (potential) coefficients, is induced by the resonance of the core-holder/vibrator system. This is important for the design of electrokinetic setup and the analysis of low-frequency response of the electrokinetic coupling coefficients.

Description: Four antibiotics (pamamycin, oligomycin A, oligomycin B and echinosporin) were isolated and characterized from the fermentation broth of the marine Streptomyces strains B8496 and B8739. Bioassays revealed that each of these compounds impaired motility and caused subsequent lysis of P. viticola zoospores in a dose- and time-dependent manner. Pamamycin displayed the strongest motility inhibitory and lytic activities (IC 50 0.1 μg mL –1 ) followed by oligomycin B (IC 50 0.15 and 0.2 μg mL –1 ) and oligomycin F (IC 50 0.3 and 0.5 μg mL –1 ). Oligomycin A and echinosporin also showed motility inhibitory activities against the zoospores with IC 50 values of 3.0 and 10.0 μg mL –1 , respectively. This is the first report of motility inhibitory and lytic activities of these antibiotics against zoospores of a phytopathogenic peronosporomycete. Structures of all the isolated compounds were determined based on detailed spectroscopic analysis.

Description: Multiparameter full waveform inversion (FWI) applied to an elastic orthorhombic model description of the subsurface requires in theory a nine-parameter representation of each pixel of the model. Even with optimal acquisition on the Earth surface that includes large offsets, full azimuth, and multicomponent sensors, the potential for trade-off between the elastic orthorhombic parameters are large. The first step to understanding such trade-off is analysing the scattering potential of each parameter, and specifically, its scattering radiation patterns. We investigate such radiation patterns for diffraction and for scattering from a horizontal reflector considering a background isotropic model. The radiation patterns show considerable potential for trade-off between the parameters and the potentially limited resolution in their recovery. The radiation patterns of C 11 , C 22 , and C 33 are well separated so that we expect to recover these parameters with limited trade-offs. However, the resolution of their recovery represented by recovered range of model wavenumbers varies between these parameters. We can only invert for the short wavelength components (reflection) of C 33 while we can mainly invert for the long wavelength components (transmission) of the elastic coefficients C 11 and C 22 if we have large enough offsets. The elastic coefficients C 13 , C 23 , and C 12 suffer from strong trade-offs with C 55 , C 44 , and C 66 , respectively. The trade-offs between C 13 and C 55 , as well as C 23 and C 44 , can be partially mitigated if we acquire P – SV and SV – SV waves. However, to reduce the trade-offs between C 12 and C 66 , we require credible SH – SH waves. The analytical radiation patterns of the elastic constants are supported by numerical gradients of these parameters.

Description: In sulfidic environments, microbes oxidize reduced sulfur compounds via several pathways. We used metagenomics to investigate sulfur metabolic pathways from microbial mat communities in two subterranean sulfidic streams in Lower Kane Cave, WY, USA and from Glenwood Hot Springs, CO, USA. Both unassembled and targeted recA gene assembly analyses revealed that these streams were dominated by Epsilonproteobacteria and Gammaproteobacteria , including groups related to Sulfurovum , Sulfurospirillum , Thiothrix and an epsilonproteobacterial group with no close cultured relatives. Genes encoding sulfide:quinone oxidoreductase (SQR) were abundant at all sites, but the specific SQR type and the taxonomic affiliation of each type differed between sites. The abundance of thiosulfate oxidation pathway genes (Sox) was not consistent between sites, although overall they were less abundant than SQR genes. Furthermore, the Sox pathway appeared to be incomplete in all samples. This work reveals both variations in sulfur metabolism within and between taxonomic groups found in these systems, and the presence of novel epsilonproteobacterial groups.

Description: Pseudomonas aeruginosa is an opportunistic pathogen with high resistance to a wide variety of antimicrobials. The multidrug resistance pump MexAB-OprM promotes the efflux of various antibiotics, mostly when mutations accumulate in the transcriptional regulators MexR, NalC and NalD, thereby causing MexAB-OprM overexpression. In this work, a characterization of 50 P. aeruginosa isolates obtained from Brazilian agricultural soils to determine the reasons of their resistance to aztreonam was done. The majority of the isolates showed higher aztreonam resistance than wild-type strain by MIC method. DNA sequence analysis of mexR , nalC and nalD genes from 13 of these isolates showed the amino acid substitution in NalC for all tested isolates, just one mutation was detected in MexR and none in NalD. Furthermore, an increase in the level of mexA expression by real-time RT-PCR analysis in eight isolates harboring mutations in NalC was found. Although there was not a relationship between MIC of aztreonam and the level of mexA expression, on the other hand, the results presented here suggest that novel mutations in NalC, including Arg 97 -Gly and Ala 186 -Thr, are related to MexAB-OprM overexpression causing aztreonam resistance in P. aeruginosa environmental isolates.

Description: Sedge-dominated wetlands on the Qinghai–Tibetan Plateau are methane emission centers. Methanotrophs at these sites play a role in reducing methane emissions, but relatively little is known about the composition of active methanotrophs in these wetlands. Here, we used DNA stable isotope probing to identify the key active aerobic methanotrophs in three sedge-dominated wetlands on the plateau. We found that Methylocystis species were active in two peatlands, Hongyuan and Dangxiong. Methylobacter species were found to be active only in Dangxiong peat. Hongyuan peat had the highest methane oxidation rate, and cross-feeding of carbon from methanotrophs to methylotrophic Hyphomicrobium species was observed. Owing to a low methane oxidation rate during the incubation, the labeling of methanotrophs in Maduo wetland samples was not detected. Our results indicate that there are large differences in the activity of methanotrophs in the wetlands of this region.

Description: Here we present the generation and function of two sets of bacterial plasmids that harbor fluorescent genes encoding either blue, cyan, yellow or red fluorescent proteins. In the first set, protein expression is controlled by the strong and constitutive nptII promoter whereas in the second set, the strong tac promoter was chosen that underlies LacI q regulation. Furthermore, the plasmids are mobilizable, contain Tn 7 transposons and a temperature-sensitive origin of replication. Using Escherichia coli S17-1 as donor strain, the plasmids allow fast and convenient Tn 7 -transposon delivery into many enterobacterial hosts, such as the here-used E. coli O157:H7. This procedure omits the need of preparing competent recipient cells and antibiotic resistances are only transiently conferred to the recipients. As the fluorescence proteins show little to no overlap in fluorescence emission, the constructs are well suited for the study of multicolored synthetic bacterial communities during biofilm production or in host colonization studies, e.g. of plant surfaces. Furthermore, tac promoter-reporter constructs allow the generation of so-called reproductive success reporters, which allow to estimate past doublings of bacterial individuals after introduction into environments, emphasizing the role of individual cells during colonization.

Description: Typically, seismic data are sparsely and irregularly sampled due to limitations in the survey environment and these cause problems for key seismic processing steps such as surface-related multiple elimination or wave-equation-based migration. Various interpolation techniques have been developed to alleviate the problems caused by sparse and irregular sampling. Among many interpolation techniques, matching pursuit interpolation is a robust tool to interpolate the regularly sampled data with large receiver separation such as crossline data in marine seismic acquisition when both pressure and particle velocity data are used. Multicomponent matching pursuit methods generally used the sinusoidal basis function, which have shown to be effective for interpolating multicomponent marine seismic data in the crossline direction. In this paper, we report the use of wavelet basis functions which further enhances the performance of matching pursuit methods for de-aliasing than sinusoidal basis functions. We also found that the range of the peak wavenumber of the wavelet is critical to the stability of the interpolation results and the de-aliasing performance and that the range should be determined based on Nyquist criteria. In addition, we reduced the computational cost by adopting the inner product of the wavelet and the input data to find the parameters of the wavelet basis function instead of using L-2 norm minimization. Using synthetic data, we illustrate that for aliased data, wavelet-based matching pursuit interpolation yields more stable results than sinusoidal function-based one when we use not only pressure data only but also both pressure and particle velocity together.

Description: Genetic engineering projects often require control over when a protein is degraded. To this end, we use a fusion between a degron and an inactivating peptide that can be added to the N-terminus of a protein. When the corresponding protease is expressed, it cleaves the peptide and the protein is degraded. Three protease:cleavage site pairs from Potyvirus are shown to be orthogonal and active in exposing degrons, releasing inhibitory domains and cleaving polyproteins. This toolbox is applied to the design of genetic circuits as a means to control regulator activity and degradation. First, we demonstrate that a gate can be constructed by constitutively expressing an inactivated repressor and having an input promoter drive the expression of the protease. It is also shown that the proteolytic release of an inhibitory domain can improve the dynamic range of a transcriptional gate (200-fold repression). Next, we design polyproteins containing multiple repressors and show that their cleavage can be used to control multiple outputs. Finally, we demonstrate that the dynamic range of an output can be improved (8-fold to 190-fold) with the addition of a protease-cleaved degron. Thus, controllable proteolysis offers a powerful tool for modulating and expanding the function of synthetic gene circuits.

Description: The geocentre motion is the motion of the centre of mass of the entire Earth, considered an isolated system, in a terrestrial system of reference. We first derive a formula relating the harmonic degree-1 Lagrangian variation of the gravity at a station to both the harmonic degree-1 vertical displacement of the station and the displacement of the whole Earth's centre of mass. The relationship is independent of the nature of the Earth deformation and is valid for any source of deformation. We impose no constraint on the system of reference, except that its origin must initially coincide with the centre of mass of the spherically symmetric Earth model. Next, we consider the geocentre motion caused by surface loading. In a system of reference whose origin is the centre of mass of the solid Earth, we obtain a specific relationship between the gravity variation at the surface, the geocentre displacement and the load Love number $h^{\prime }_1$ , which demands the Earth's structure and rheological behaviour be known. For various networks of real or fictitious stations, we invert synthetic signals of surface gravity variations caused by atmospheric loading to retrieve the degree-1 variation of gravity. We then select six well-distributed stations of the Global Geodynamics Project, which is a world network of superconducting gravimeters, to invert actual gravity data for the degree-1 variations and determine the geocentre displacement between the end of 2004 and the beginning of 2012, assuming it to be due to surface loading. We find annual and semi-annual displacements with amplitude 0.5–2.3 mm.

Description: Spa -typing and microarray techniques were used to study epidemiological changes in methicillin-resistant Staphylococcus aureus (MRSA) in South-East Austria. The population structure of 327 MRSA isolated between 2002 and 2012 was investigated. MRSA was assigned to 58 different spa types and 14 different MLST CC (multilocus sequence type clonal complexes); in particular, between 2007 and 2012, an increasing diversity in MRSA clones could be observed. The most abundant clonal complex was CC5. On the respective SCC mec cassettes, the CC5 isolates differed clearly within this decade and CC5/SCC mec I, the South German MRSA, predominant in 2002, was replaced by CC5/SCC mec II, the Rhine-Hesse MRSA in 2012. Whereas in many European countries MLST CC22-MRSA (EMRSA 15, the Barnim epidemic MRSA) is predominant, this clone occurred in Austria nearly 10 years later than in neighbouring countries. CC45, the Berlin EMRSA, epidemic in Germany, was only sporadically found in South-East Austria. The Irish ST8-MRSA-II represented by spa -type t190 was frequently found in 2002 and 2007, but disappeared in 2012. Our results demonstrate clonal replacement of MRSA clones within the last years in Austria. Ongoing surveillance is warranted for detection of changes within the MRSA population.

Description: This study aimed to investigate the effects of dietary fibre sources on the gut microbiota in suckling piglets, and to test the hypothesis that a moderate increase of dietary fibre may affect the gut microbiota during the suckling period. Suckling piglets were fed different fibre-containing diets or a control diet from postnatal day 7 to 22. Digesta samples from cecum, proximal colon and distal colon were used for Pig Intestinal Tract Chip analysis. The data showed that the effects of fibre-containing diet on the gut microbiota differed in the fibre source and gut location. The alfalfa diet increased Clostridium cluster XIVb and Sporobacter termitidis in the cecum compared to the pure cellulose diet. Compared to the control diet, the alfalfa diet also increased Coprococcus eutactus in the distal colon, while the pure cellulose diet decreased Eubacterium pyruvativorans in the cecum. The pure cellulose diet increased Prevotella ruminicola compared to the wheat bran diet. Interestingly, the alfalfa group had the lowest abundance of the potential pathogen Streptococcus suis in the cecum and distal colon. These results indicated that a moderate increase in dietary fibres affected the microbial composition in suckling piglets, and that the alfalfa inclusion produced some beneficial effects on the microbial communities.

Description: One function of the gut microbiota gaining recent attention, especially in herbivorous mammals and insects, is the metabolism of plant secondary metabolites (PSMs). We investigated whether this function exists within the gut communities of a specialist avian herbivore. We sequenced the cecal metagenome of the Greater Sage-Grouse ( Centrocercus urophasianus ), which specializes on chemically defended sagebrush ( Artemisia spp.). We predicted that the cecal metagenome of the sage-grouse would be enriched in genes associated with the metabolism of PSMs when compared to the metagenome of the domestic chicken. We found that representation of microbial genes associated with ‘xenobiotic degradation and metabolism’ was 3-fold higher in the sage-grouse cecal metagenomes when compared to that of the domestic chicken. Further, we identified a complete metabolic pathway for the degradation of phenol to pyruvate, which was not detected in the metagenomes of the domestic chicken, bovine rumen or 14 species of mammalian herbivores. Evidence of monoterpene degradation (a major class of PSMs in sagebrush) was less definitive, although we did detect genes for several enzymes associated with this process. Overall, our results suggest that the gut microbiota of specialist avian herbivores plays a similar role to the microbiota of mammalian and insect herbivores in degrading PSMs.

Description: Deep sea pockmarks underlain by chimney-like or pipe structures that contain methane hydrate are abundant along the Norwegian continental margin. In such hydrate provinces the interaction between hydrate formation and fluid flow has significance for benthic ecosystems and possibly climate change. The Nyegga region, situated on the western Norwegian continental slope, is characterized by an extensive pockmark field known to accommodate substantial methane gas hydrate deposits. The aim of this study is to detect and delineate both the gas hydrate and free gas reservoirs at one of Nyegga's pockmarks. In 2012, a marine controlled-source electromagnetic (CSEM) survey was performed at a pockmark in this region, where high-resolution 3-D seismic data were previously collected in 2006. 2-D CSEM inversions were computed using the data acquired by ocean bottom electrical field receivers. Our results, derived from unconstrained and seismically constrained CSEM inversions, suggest the presence of two distinctive resistivity anomalies beneath the pockmark: a shallow vertical anomaly at the underlying pipe structure, likely due to gas hydrate accumulation, and a laterally extensive anomaly attributed to a free gas zone below the base of the gas hydrate stability zone. This work contributes to a robust characterization of gas hydrate deposits within subseafloor fluid flow pipe structures.

Description: Intracellular endosymbiotic bacteria are common and can play a crucial role for insect pathology. Therefore, such bacteria could be a potential key to our understanding of major losses of Western honey bees ( Apis mellifera ) colonies. However, the transmission and potential effects of endosymbiotic bacteria in A. mellifera and other Apis spp. are poorly understood. Here, we explore the prevalence and transmission of the genera Arsenophonus , Wolbachia , Spiroplasma and Rickettsia in Apis spp. Colonies of A. mellifera ( N = 33, with 20 eggs from worker brood cells and 100 adult workers each) as well as mated honey bee queens of A. cerana , A. dorsata and A. florea ( N = 12 each) were screened using PCR. While Wolbachia , Spiroplasma and Rickettsia were not detected, Arsenophonus spp. were found in 24.2% of A. mellifera colonies and respective queens as well as in queens of A. dorsata (8.3%) and A. florea (8.3%), but not in A. cerana . The absence of Arsenophonus spp. from reproductive organs of A. mellifera queens and surface-sterilized eggs does not support transovarial vertical transmission. Instead, horizontal transmission is most likely.

Description: We review the theory of the Earth's elastic and gravitational response to a surface disk load. The solutions for displacement of the surface and the geoid are developed using expansions of Legendre polynomials, their derivatives and the load Love numbers. We provide a matlab  function called diskload that computes the solutions for both uncompensated and compensated disk loads. In order to numerically implement the Legendre expansions, it is necessary to choose a harmonic degree, n max , at which to truncate the series used to construct the solutions. We present a rule of thumb (ROT) for choosing an appropriate value of n max , describe the consequences of truncating the expansions prematurely and provide a means to judiciously violate the ROT when that becomes a practical necessity.

Description: One of the main applications of magnetic field measurements in boreholes is the detection of unexploded ordnance or buried utility structures like pipes or tiebacks. Even though the advantage of fully oriented magnetic vector measurements have long been recognized and could significantly reduce costs and risks, the tools used for those purposes typically measure only the total magnetic field, the vertical and horizontal components or gradients thereof. The Göttingen Bohrloch Magnetometer uses three fibre optic gyros to record its orientation and thus enables us to compute high-quality three-component magnetic vector data regardless of borehole orientation. The measurements described in this paper were run in the scientific borehole Cuxhaven Lüdingworth 1/1A, which was drilled as a part of the ‘Coastal Aquifer Test field’ project to study the dynamics of the saltwater/freshwater interface. As the drill string got stuck during drilling of the first borehole, a second hole was drilled in the immediate vicinity. The drill string lies at a depth between 80 and 114 m at a distance of only 2.5 m southeast of the borehole used for the measurements, making it an ideal target to demonstrate the benefits of vector magnetic surveys. Although the theories to calculate magnetic fields of objects with different shapes is well established and do not need to be tested, they almost exclusively include approximations of the geometry. It is not obvious whether these approximations are suited to describe real data, or whether additional effects or refinements have to be considered. We use both a simplified monopole model and a cylinder model to fit the data and are able to determine the position of the drill string within a statistical error of approximately 10 cm. Additionally, we show that the location of the drill string could not have been determined by measurements of the total field or its horizontal and vertical component alone and that those methods would require the drilling of additional boreholes to obtain an unambiguous result.

Description: Two types of signals are clearly visible in continuous GPS (cGPS) time-series in Iceland, in particular in the vertical component. The first one is a yearly seasonal cycle, usually sinusoid-like with a minimum in the spring and a maximum in the fall. The second one is a trend of uplift, with higher values the closer the cGPS stations are to the centre of Iceland and ice caps. Here, we study the seasonal cycle signal by deriving its average at 71 GPS sites in Iceland. We estimate the annual and semi-annual components of the cycle in their horizontal and vertical components using a least-squares adjustment. The peak-to-peak amplitude of the cycle of the vertical component at the studied sites ranges from 4 mm near the coastline up to 27 mm at the centre of the Vatnajökull, the largest ice cap in Iceland. The minimum of the seasonal cycle occurs earlier in low lying areas than in the central part of Iceland, consistent with snow load having a large influence on seasonal deformation. Modelling shows that the seasonal cycle is well explained by accounting for elastically induced surface displacements due to snow, atmosphere, reservoir lake and ocean variations. Model displacement fields are derived considering surface loads on a multilayered isotropic spherical Earth. Through forward and inverse modelling, we were able to reproduce a priori information on the average seasonal cycle of known loads (atmosphere, snow in non-glaciated areas and lake reservoir) and get an estimation of other loads (glacier mass balance and ocean). The seasonal glacier mass balance cycle in glaciated areas and snow load in non-glaciated areas are the main contributions to the seasonal deformation. For these loads, induced seasonal vertical displacements range from a few millimetres far from the loads in Iceland, to more than 20 mm at their centres. Lake reservoir load also has to be taken into account on local scale as it can generate up to 20 mm of vertical deformation. Atmosphere load and ocean load are observable and generate vertical displacements in the order of a few millimetres. Inversion results also shows that the Iceland crust is less rigid than the world average. Interannual deviation from the GPS seasonal cycle can occur and are caused by unusual weather conditions over extended period of time.

Description: Wood-rotting fungi possess remarkably diverse extracellular oxidation mechanisms, including enzymes, such as laccase and peroxidases, and Fenton chemistry. The ability to biologically drive Fenton chemistry by the redox cycling of quinones has previously been reported to be present in both ecologically diverging main groups of wood-rotting basidiomycetes. Therefore, we investigated whether it is even more widespread among fungal organisms. Screening of a diverse selection of a total of 18 ascomycetes and basidiomycetes for reduction of the model compound 2,6-dimethoxy benzoquinone revealed that all investigated strains were capable of reducing it to its corresponding hydroquinone. In a second step, depolymerization of the synthetic polymer polystyrene sulfonate was used as a proxy for quinone-dependent Fenton-based biodegradation capabilities. A diverse subset of the strains, including environmentally ubiquitous molds, white-rot fungi, as well as peatland and aquatic isolates, caused substantial depolymerization indicative for the effective employment of quinone redox cycling as biodegradation tool. Our results may also open up new paths to utilize diverse fungi for the bioremediation of recalcitrant organic pollutants.

Description: Ice-binding proteins (IBPs), such as antifreeze proteins (AFPs) and ice-nucleating proteins (INPs), have been described in diverse cold-adapted organisms, and their potential applications in biotechnology have been recognized in various fields. Currently, both IBPs are being applied to biotechnological processes, primarily in medicine and the food industry. However, our knowledge regarding the diversity of bacterial IBPs is limited; few studies have purified and characterized AFPs and INPs from bacteria. Phenotypically verified IBPs have been described in members belonging to Gammaproteobacteria, Actinobacteria and Flavobacteriia classes, whereas putative IBPs have been found in Gammaproteobacteria, Alphaproteobacteria and Bacilli classes. Thus, the main goal of this minireview is to summarize the current information on bacterial IBPs and their application in biotechnology, emphasizing the potential application in less explored fields such as agriculture. Investigations have suggested the use of INP-producing bacteria antagonists and AFPs-producing bacteria (or their AFPs) as a very attractive strategy to prevent frost damages in crops. UniProt database analyses of reported IBPs (phenotypically verified) and putative IBPs also show the limited information available on bacterial IBPs and indicate that major studies are required.

Description: Triazophos is a broad-spectrum and highly effective insecticide, and the residues of triazophos have been frequently detected in the environment. A triazophos-degrading bacterium, Burkholderia sp. SZL-1, was isolated from a long-term triazophos-polluted soil. Strain SZL-1 could hydrolyze triazophos to 1-phenyl-3-hydroxy-1,2,4-triazole, which was further utilized as the carbon sources for growth. The triazophos hydrolase gene trhA , cloned from strain SZL-1, was expressed and homogenously purified using Ni-nitrilotriacetic acid affinity chromatography. TrhA is 55 kDa and displays maximum activity at 25°C, pH 8.0. This enzyme still has nearly 60% activity at the range of 15°C–50°C for 30 min. TrhA was mutated by sequential error prone PCR and screened for improved activity for triazophos degradation. One purified variant protein (Val89-Gly89) named TrhA-M1 showed up to 3-fold improvement in specific activity against triazophos, and the specificity constants of K cat and K cat / K m for TrhA-M1 were improved up to 2.3- and 8.28-fold, respectively, compared to the wild-type enzyme. The results in this paper provided potential material for the contaminated soil remediation and hydrolase genetic structure research.

Description: The metal mining industry faces many large challenges in future years, among which is the increasing need to process low-grade ores as accessible higher grade ores become depleted. This is against a backdrop of increasing global demands for base and precious metals, and rare earth elements. Typically about 99% of solid material hauled to, and ground at, the land surface currently ends up as waste (rock dumps and mineral tailings). Exposure of these to air and water frequently leads to the formation of acidic, metal-contaminated run-off waters, referred to as acid mine drainage, which constitutes a severe threat to the environment. Formation of acid drainage is a natural phenomenon involving various species of lithotrophic (literally ‘rock-eating’) bacteria and archaea, which oxidize reduced forms of iron and/or sulfur. However, other microorganisms that reduce inorganic sulfur compounds can essentially reverse this process. These microorganisms can be applied on industrial scale to precipitate metals from industrial mineral leachates and acid mine drainage streams, resulting in a net improvement in metal recovery, while minimizing the amounts of leachable metals to the tailings storage dams. Here, we advocate that more extensive exploitation of microorganisms in metal mining operations could be an important way to green up the industry, reducing environmental risks and improving the efficiency and the economy of metal recovery.

Description: Seismic waves produced by fault ruptures give rise to gravity perturbations. So far, these perturbations have either been modelled as permanent coseismic gravity change in a half-space or spherical Earth model, or as full time-domain model in infinite space. In this paper, we present the explicit solution of gravity perturbations in time domain produced by a double-couple buried in a homogeneous half-space. This result is especially suited to study gravity perturbations up to a few hundreds of kilometres from the epicentre. It facilitates detailed parametric studies of gravity perturbations from fault rupture, and predicts gravity perturbations of real earthquakes with greatly improved accuracy. The results may serve to develop first designs of gravity-assisted earthquake early-warning systems, made possible by a new generation of ultrasensitive gravity gradiometers, which is currently under development.

Description: Continuous gravimetric observations have been made with three successive generations of superconducting gravimeter over 20 yr at Syowa Station ( $39.6\deg$ E, $69.0\deg$ S), East Antarctica. The third-generation instrument, OSG#058, was installed in January 2010 and was calibrated by an absolute gravimeter during January and February, 2010. The estimated scale factor was –73.823 ± 0.053 μGal V –1 (1 μGal = 10 –8 m s –2 ). The first 5 yr of OSG#058 data from 2010 January 7 to 2015 January 10 were decomposed into tidal waves (M3 to Ssa) and other non-tidal components by applying the Bayesian tidal analysis program BAYTAP. Long-term non-tidal gravity residuals, which were obtained by subtracting annual and 18.6 year tidal waves and the predicted gravity response to the Earth's variable rotation, showed significant correlation with the accumulated snow depth measured at Syowa Station. The greatest correlation occurred when the gravity variations lagged the accumulated snow depth by 21 d. To estimate the gravitational effect of the accumulated snow mass, we inferred a conversion factor of 3.13 ± 0.08 μGal m –1 from this relation. The accumulated snow depth at Syowa Station was found to represent an extensive terrestrial water storage (the snow accumulation) around Syowa Station, which was estimated from the Gravity Recovery and Climate Experiment satellite gravity data. The snow accumulation around Syowa Station was detectable by the superconducting gravimeter.

Description: The new release AIUB-RL02 of monthly gravity models from GRACE GPS and K-Band range-rate data is based on reprocessed satellite orbits referring to the reference frame IGb08. The release is consistent with the IERS2010 conventions. Improvements with respect to its predecessor AIUB-RL01 include the use of reprocessed (RL02) GRACE observations, new atmosphere and ocean dealiasing products (RL05), an upgraded ocean tide model (EOT11A), and the interpolation of shallow ocean tides (admittances). The stochastic parametrization of AIUB-RL02 was adapted to include daily accelerometer scale factors, which drastically reduces spurious signal at the 161 d period in C 20 and at other low degree and order gravity field coefficients. Moreover, the correlation between the noise in the monthly gravity models and solar activity is considerably reduced in the new release. The signal and the noise content of the new AIUB-RL02 monthly gravity fields are studied and calibrated errors are derived from their non-secular and non-seasonal variability. The short-period time-variable signal over the oceans, mostly representing noise, is reduced by 50 per cent with respect to AIUB-RL01. Compared to the official GFZ-RL05a and CSR-RL05 monthly models, the AIUB-RL02 stands out by its low noise at high degrees, a fact emerging from the estimation of seasonal variations for selected river basins and of mass trends in polar regions. Two versions of the monthly AIUB-RL02 gravity models, with spherical harmonics resolution of degree and order 60 and 90, respectively, are available for the time period from March 2003 to March 2014 at the International Center for Global Earth Models or from ftp://ftp.unibe.ch/aiub/GRAVITY/GRACE (last accessed 22 March 2016).

Description: Proteins adhere to DNA at locations and with strengths that depend on the protein conformation, the underlying DNA sequence and the ionic content of the solution. A facile technique to probe the positions and strengths of protein-DNA binding would aid in understanding these important interactions. Here, we describe a ‘DNA pulley’ for position-resolved nano-mechanical measurements of protein-DNA interactions. A molecule of DNA is tethered by one end to a glass surface, and by the other end to a magnetic bead. The DNA is stretched horizontally by a magnet, and a nanoscale knife made of silicon nitride is manipulated to contact, bend and scan along the DNA. The mechanical profile of the DNA at the contact with the knife is probed via nanometer-precision optical tracking of the magnetic bead. This system enables detection of protein bumps on the DNA and localization of their binding sites. We study theoretically the technical requirements to detect mechanical heterogeneities in the DNA itself.

Description: Synthetic biology seeks to envision living cells as a matter of engineering. However, increasing evidence suggests that the genetic load imposed by the incorporation of synthetic devices in a living organism introduces a sort of unpredictability in the design process. As a result, individual part characterization is not enough to predict the behavior of designed circuits and thus, a costly trial-error process is eventually required. In this work, we provide a new theoretical framework for the predictive treatment of the genetic load. We mathematically and experimentally demonstrate that dependences among genes follow a quantitatively predictable behavior. Our theory predicts the observed reduction of the expression of a given synthetic gene when an extra genetic load is introduced in the circuit. The theory also explains that such dependence qualitatively differs when the extra load is added either by transcriptional or translational modifications. We finally show that the limitation of the cellular resources for gene expression leads to a mathematical formulation that converges to an expression analogous to the Ohm's law for electric circuits. Similitudes and divergences with this law are outlined. Our work provides a suitable framework with predictive character for the design process of complex genetic devices in synthetic biology.

Description: We document two kinds of traveling ionospheric disturbances, namely, CTIDs (Co-tsunami-Traveling-Ionospheric-disturbances) and ATIDs (Ahead-of-Tsunami-Traveling-Ionospheric-disturbances) related to the Tohoku-Oki tsunami of 2011 March 11. They are referred to the disturbances that remain behind and ahead of the principal tsunami wave front, respectively. We first note their presence in a numerical experiment performed using a simulation code coupling the tsunami, atmosphere and ionosphere. This code uses the tsunami wavefield as an input and simulates acoustic-gravity waves (AGWs) in the atmosphere and TIDs, in the form of total electron content (TEC) disturbance, in the ionosphere. The simulated TEC reveals the excitation of CTIDs (at about 2 TECU) and ATIDs (at about 1 TECU), representing up to 5 per cent disturbance over the ambient electron density, and they arise from the dissipation of AGWs in the thermosphere. A novel outcome is that during the tsunami passage between ~6° and 12° of epicentral distance, strong ATIDs arrive ~20–60 min ahead of the tsunami wave front covering ~3°–10° of distance from the tsunami location. Simulation results are compared with the far-field observations using GNSS satellites and confirm that ATIDs are the first detected TEC maximum, occurring 20–60 min ahead of the tsunami arrival. Our simulation also confirms the presence of largest TEC maximum representing CTIDs, 10–20 min after the first tsunami wave. ATIDs reported in this study have characteristics that can be potentially used for the early warning of the tsunami.

Description: Although seismic attenuation measurements have great potential to enhance our knowledge of physical conditions and rock properties, their application is limited because robust methods for improving both the resolution and accuracy of attenuation estimates have not yet been established. We propose attenuation estimation methods for zero-offset vertical seismic profile (VSP) data by combining seismic interferometry (SI) and the modified median frequency shift (MMFS) method developed for attenuation estimation using sonic waveform data. The configuration of zero-offset VSP data is redatumed to that of the sonic logging measurement by adopting two types of SI: deconvolution interferometry and crosscorrelation interferometry (CCI). Then, we can apply the MMFS method to the redatumed VSP data. Although the amplitude information estimated from CCI is biased, we propose a correction method for this bias to correctly estimate attenuation. First, to investigate the performance both in resolution and accuracy, we apply different trace separations to synthetic data with random noise at different signal-to-noise ratio levels. Second, we estimate the influence of residual reflection events after wavefield separation on attenuation estimation. The proposed methods provide more stable attenuation estimates in comparison with the spectral ratio method because the mean-median procedure suppresses random events and characteristic features caused by residual reflection events in spectral domain. Our numerical experiments also imply that the proposed methods can estimate scattering attenuation values even if frequency components are not changed between the two receiver depths. Finally, by preliminarily applying the proposed methods to field VSP data, we demonstrate the advantages of the proposed method in the resolution and stability of attenuation estimates and these observations correlate with those of numerical tests.

Description: Differential inhibitors are important for measuring the relative contributions of microbial groups, such as ammonia-oxidizing bacteria (AOB) and ammonia-oxidizing archaea (AOA), to biogeochemical processes in environmental samples. In particular, 2-phenyl-4,4,5,5-tetramethylimidazoline-1-oxyl 3-oxide (PTIO) represents a nitric oxide scavenger used for the specific inhibition of AOA, implicating nitric oxide as an intermediate of thaumarchaeotal ammonia oxidation. This study investigated four alternative nitric oxide scavengers for their ability to differentially inhibit AOA and AOB in comparison to PTIO. Caffeic acid, curcumin, methylene blue hydrate and trolox were tested on Nitrosopumilus maritimus , two unpublished AOA representatives (AOA-6f and AOA-G6) as well as the AOB representative Nitrosomonas europaea . All four scavengers inhibited ammonia oxidation by AOA at lower concentrations than for AOB. In particular, differential inhibition of AOA and AOB by caffeic acid (100 μM) and methylene blue hydrate (3 μM) was comparable to carboxy-PTIO (100 μM) in pure and enrichment culture incubations. However, when added to aquarium sponge biofilm microcosms, both scavengers were unable to inhibit ammonia oxidation consistently, likely due to degradation of the inhibitors themselves. This study provides evidence that a variety of nitric oxide scavengers result in differential inhibition of ammonia oxidation in AOA and AOB, and provides support to the proposed role of nitric oxide as a key intermediate in the thaumarchaeotal ammonia oxidation pathway.

Description: Peatlands of all latitudes play an integral role in global climate change by serving as a carbon sink and a primary source of atmospheric methane; however, the microbial ecology of mid-latitude peatlands is vastly understudied. Herein, next generation Illumina amplicon sequencing of small subunit rRNA genes was utilized to elucidate the microbial communities in three southern Appalachian peatlands. In contrast to northern peatlands, Proteobacteria dominated over Acidobacteria in all three sites. An average of 11 bacterial phyla was detected at relative abundance values 〉1%, with three candidate divisions (OP3, WS3 and NC10) represented, indicating high phylogenetic diversity. Physiological traits of isolates within the candidate alphaproteobacterial order, Ellin 329, obtained here and in previous studies indicate that bacteria of this order may be involved in hydrolysis of poly-, di- and monosaccharides. Community analyses indicate that Ellin 329 is the third most abundant order and is most abundant near the surface layers where plant litter decomposition should be primarily occurring. In sum, members of Ellin 329 likely play important roles in organic matter decomposition, in southern Appalachian peatlands and should be investigated further in other peatlands and ecosystem types.

Description: Marine viruses are the most abundant biological entity in the oceans, the majority of which infect bacteria and are known as bacteriophages. Yet, the bulk of bacteriophages form part of the vast uncultured dark matter of the microbial biosphere. In spite of the paucity of cultured marine bacteriophages, it is known that marine bacteriophages have major impacts on microbial population structure and the biogeochemical cycling of key elements. Despite the ecological relevance of marine bacteriophages, there are relatively few isolates with complete genome sequences. This minireview focuses on knowledge gathered from these genomes put in the context of viral metagenomic data and highlights key advances in the field, particularly focusing on genome structure and auxiliary metabolic genes.

Description: The fynbos biome in South Africa is globally recognised as a plant biodiversity hotspot. However, very little is known about the bacterial communities associated with fynbos plants, despite interactions between primary producers and bacteria having an impact on the physiology of both partners and shaping ecosystem diversity. This study reports on the structure, phylogenetic composition and potential roles of the endophytic bacterial communities located in the stems of three fynbos plants ( Erepsia anceps , Phaenocoma prolifera and Leucadendron laureolum ). Using Illumina MiSeq 16S rRNA sequencing we found that different subpopulations of Deinococcus-Thermus, Alphaproteobacteria, Acidobacteria and Firmicutes dominated the endophytic bacterial communities. Alphaproteobacteria and Actinobacteria were prevalent in P. prolifera , whereas Deinococcus-Thermus dominated in L. laureolum , revealing species-specific host–bacteria associations. Although a high degree of variability in the endophytic bacterial communities within hosts was observed, we also detected a core microbiome across the stems of the three plant species, which accounted for 72% of the sequences. Altogether, it seems that both deterministic and stochastic processes shaped microbial communities. Endophytic bacterial communities harboured putative plant growth-promoting bacteria, thus having the potential to influence host health and growth.

Description: Capacitively Coupled Resistivity (CCR) is conventionally used to emulate DC resistivity measurements and may provide important information about the ice content of material in periglacial areas. The application of CCR theoretically enables the determination of both electrical parameters, that is, the resistivity and the electrical permittivity, by analysing magnitude and phase shift spectra. The electrical permittivity may dominate the impedance, especially in periglacial areas or regions of hydrogeological interest. However, previous theoretical work suggested that the phase shift may strongly depend on electrode height above ground, implying that electrode height must be known with great accuracy to determine electrical permittivity. Here, we demonstrate with laboratory test measurements, theoretical modelling and by analysing the Jacobian matrix of the inversion that the sensitivity towards electrode height is drastically reduced if the electrical permittivity is frequency dependent in a way that is typical for ice. For the first time, we used a novel broad-band CCR device ‘Chameleon’ for a field test located in one of the ridge galleries beneath the crest of Mount Zugspitze. A permanently ice covered bottom of a tunnel was examined. For the inversion of the measured spectra, the frequency dependence of the electrical parameters was parametrized in three different ways: A Debye Model for pure ices, a Cole–Cole Model for pure ices and a dual Cole–Cole Model including interfacial water additionally. The frequency-dependent resistivity and permittivity spectra obtained from the inversion, including low- and high-frequency limits, agree reasonably well with laboratory and field measurements reported in the literature.

Description: Apparent acceleration in Gravity Recovery and Climate Experiment (GRACE) Antarctic ice mass time-series may reflect both ice discharge and surface mass balance contributions. However, a recent study suggests there is also contamination from errors in atmospheric pressure de-aliasing fields [European Center for Medium-Range Weather Forecast (ECMWF) operational products] used during GRACE data processing. To further examine this question, we compare GRACE atmospheric pressure de-aliasing (GAA) fields with in situ surface pressure data from coastal and inland stations. Differences between the two are likely due to GAA errors, and provide a measure of error in GRACE solutions. Time-series of differences at individual weather stations are fit to four presumed error components: annual sinusoids, a linear trend, an acceleration term and jumps at times of known ECMWF model changes. Using data from inland stations, we estimate that atmospheric pressure error causes an acceleration error of about +7.0 Gt yr –2 , which is large relative to prior GRACE estimates of Antarctic ice mass acceleration in the range of –12 to –14 Gt yr –2 . We also estimate apparent acceleration rates from other barometric pressure (reanalysis) fields, including ERA-Interim, MERRA and NCEP/DOE. When integrated over East Antarctica, the four mass acceleration estimates (from GAA and the three reanalysis fields) vary considerably (by ~2–16 Gt yr –2 ). This shows the need for further effort to improve atmospheric mass estimates in this region of sparse in situ observations, in order to use GRACE observations to measure ice mass acceleration and related sea level change.

Description: We evaluate the applicability and the effectiveness of GPR attribute analysis for high-resolution glacier imaging and characterization, testing this approach on 4-D GPR multifrequency data collected in a small glacier in the Eastern Alps, by repeating the acquisition along the same profiles in four different periods of the year 2013. The main objectives are to image and characterize the glacier's inner structure and to quantitatively monitor the seasonal thawing of near-surface frozen materials (snow/firn). A multiattribute approach is used to characterize the subsurface through different attribute categories, including instantaneous and textural attributes considering not only amplitude-, phase- and frequency-related attributes, but also other more complex and integrated parameters. We combine information from more than one attribute into a single image with composite displays, using overlays or mixed displays. The results demonstrate that the developed GPR attribute analysis can provide significant improvements in the discrimination of GPR signals, and obtain enhanced and more constrained data interpretations.

Description: Light-regulated modules offer unprecedented new ways to control cellular behavior in precise spatial and temporal resolution. The availability of such tools may dramatically accelerate the progression of synthetic biology applications. Nonetheless, current optogenetic toolbox of prokaryotes has potential issues such as lack of rapid and switchable control, less portable, low dynamic expression and limited parts. To address these shortcomings, we have engineered a novel bidirectional promoter system for Escherichia coli that can be induced or repressed rapidly and reversibly using the blue light dependent DNA-binding protein EL222. We demonstrated that by modulating the dosage of light pulses or intensity we could control the level of gene expression precisely. We show that both light-inducible and repressible system can function in parallel with high spatial precision in a single cell and can be switched stably between ON- and OFF-states by repetitive pulses of blue light. In addition, the light-inducible and repressible expression kinetics were quantitatively analysed using a mathematical model. We further apply the system, for the first time, to optogenetically synchronize two receiver cells performing different logic behaviors over time using blue light as a molecular clock signal. Overall, our modular approach layers a transformative platform for next-generation light-controllable synthetic biology systems in prokaryotes.

Description: Migration velocity analysis aims at automatically updating the large-scale components of the velocity model, called macromodel. Extended Common Image Gathers are panels used to evaluate focusing after imaging and are constructed as a function of a spatial shift introduced in the imaging condition. We investigate how transmitted waves can also be used in migration velocity analysis: instead of back-propagating the residuals associated with reflected waves, we propose to back-propagate the full wavefield. The image function, equivalent to the migrated section for reflected data, does not exhibit localized events in space along horizons but is still sensitive to the choice of the background velocity model and can thus be coupled to the same objective function defined in the image domain. In order to enhance the benefits of direct waves, we consider a cross-well configuration. Direct waves provide a large illumination between two vertical wells. Associated Common Image Gathers present different characteristics than the ones associated with reflected waves in surface acquisition. In particular, energy is spread over up to the maximum penetration depth. We invert cross-well seismic data along two lines. In the first case, the input data contain the full wavefield dominated by transmitted waves. It demonstrates the possibility to handle transmitted waves to determine the velocity model. It appears that the misfit in the data domain is largely reduced after inversion. In the second case, we use the same algorithm, but with reflected observed data only, as in a classical approach. Most of velocity updates are localized around the reflectivity, leading to an incorrect final model. This demonstrates the benefit of transmitted waves for migration velocity analysis in a cross-well configuration.

Description: The long-wavelength gravity field contains information about processes in the sublithospheric mantle. As satellite-derived gravity models now provide the long to medium-wavelength gravity field at unprecedented accuracy, techniques used to process gravity data need to be updated. We show that when determining these long-wavelengths, the treatment of topographic-isostatic effect (TIE) and isostatic effects (IE) is a likely source of error. We constructed a global isostatic model and calculated global TIE and IE. These calculations were done for ground stations as well as stations at satellite height. We considered both gravity and gravity gradients. Using these results, we determined how much of the gravity signal comes from distant sources. We find that a significant long-wavelength bias is introduced if far-field effects on the topographic effect are neglected. However, due to isostatic compensation far-field effects of the topographic effect are to a large degree compensated by the far-field IE. This means that far-field effects can be reduced effectively by always considering topographic masses together with their compensating isostatic masses. We show that to correctly represent the ultra-long wavelengths, a global background model should be used. This is demonstrated both globally and for a continental-scale case area in North America. In the case of regional modelling, where the ultra-long wavelengths are not of prime importance, gravity gradients can be used to help minimize correction errors caused by far-field effects.

Description: An integrated approach to interpret Self-Potential (SP) anomalies based on spectral analysis and tomographic methods is presented. The Maximum Entropy Method (MEM) is used for providing accurate estimates of the depth of the anomaly source. The 2-D tomographic inversion technique, based on the underground charge occurrence probability (COP) function, is, then, used to fully characterize the anomalous body, as the MEM is not helpful in delineating the shape of the anomaly source. The proposed integrated approach is applied for the inversion of synthetic SP data generated by geometrically simple anomalous bodies, such as cylinders and inclined sheets. This numerical study has allowed the determination of mathematical relationships between zero lines of the COP distributions, the polarization angles and the positions along the profile of the causative sources, which have been of great help for interpreting the related SP anomalies. Finally, the analysis of field examples shows the high potential applicability of the proposed integrated approach for SP data inversion.

Description: Volcanic and tectonic events are the main processes involved in the generation of the oceanic crust and responsible for the seismicity associated with seafloor spreading. To monitor this activity, usually not or poorly detected by land-based seismological stations, we deployed from February 2012 to February 2013 a network of autonomous hydrophones to compare the behaviour of the ultraslow-spreading Southwest Indian ridge (SWIR) with that of the intermediate-spreading Southeast Indian ridge (SEIR). The rate of seismicity is similar for both ridges, suggesting that there is no systematic relationship between seismicity and spreading rates. The along-axis distribution of the seismic events, however, does differ, reflecting the rate dependence of accretion modes. Earthquakes are sparse and regularly spaced and scattered along the SWIR, reflecting prevailing tectonic processes. By contrast, along the SEIR, events are irregularly distributed and focus at ridge-segment ends and transforms faults, reflecting the ridge segmentation; only two swarms occurred at a segment centre and are probably caused by a magmatic event. This seismicity distribution thus looks controlled by segment-scale crustal heterogeneities along the SEIR and by regional-scale contrasting accretion processes along the SWIR, probably driven by different lithospheric and asthenospheric dynamics on either side of the Melville fracture zone. The comparison of hydroacoustic and teleseismic catalogues shows that, along these spreading ridges, the background seismicity observed in 1 yr by a hydroacoustic network is representative of the seismicity observed over two decades by land-based networks.

Description: The functioning of many natural and engineered environments is dependent on long distance electron transfer mediated through electrical currents. These currents have been observed in exoelectrogenic biofilms and it has been proposed that microbial biofilms can mediate electron transfer via electrical currents on the centimeter scale. However, direct evidence to confirm this hypothesis has not been demonstrated and the longest known electrical transfer distance for single species exoelectrogenic biofilms is limited to 100 μm. In the present study, biofilms were developed on electrodes with electrically non-conductive gaps from 50 μm to 1 mm and the in situ conductance of biofilms was evaluated over time. Results demonstrated that the exoelectrogenic mixed species biofilms in the present study possess the ability to transfer electrons through electrical currents over a distance of up to 1 mm, 10 times further than previously observed. Results indicate the possibility of interspecies interactions playing an important role in the spatial development of exoelectrogenic biofilms, suggesting that these biological networks might remain conductive even at longer distance. These findings have significant implications in regards to future optimization of microbial electrochemical systems.

Description: Constraining laterally varying structures in planetary interiors is important for understanding both the composition and the internal dynamics of a planet. Recognizing that seismic imaging technique is currently only viable for studying the Earth's interior structures, methods that can be supported by advanced space geodetic techniques may become alternatives to ‘image’ the interiors of other planets. The method of tidal tomography is one possibility, and it relies on high precision measurement of the response of a planet to its body tide. However, it is essential to develop an efficient analytical tool that computes the dependence of tidal response to 3-D interior structures. In this paper, we present a complete formulation of such an analytical tool, which calculates to high accuracy the tidal response of a terrestrial planet with lateral heterogeneities in its elastic and density structures. We treat the lateral heterogeneities as small perturbations and derive the governing equations based on the perturbation theory. In a spherical harmonic representation, equations at each order of perturbation are reduced into multiple matrix equations at harmonics that are allowed by mode couplings, and the total response equals the sum of all those single-harmonic responses, which can be solved semi-analytically. We test our perturbation method by applying it to the Moon with a harmonic degree-1 mantle structure for which the perturbation solutions of the tidal response are compared with those from a fully numerical method. The remarkable agreement between results from these two methods validates the perturbation method. As an example, we then use the perturbation method to evaluate the impact of lunar crustal thickness variations on tidal response of the Moon. We find that lunar crust produces much smaller degree-3 tidal responses than a relatively weak degree-1 structure in the deep lunar mantle. Our calculations show that degree-3 tidal response measurements may hold key constraints on possible degree-1 mantle structure of the Moon, as suggested from previous modelling results.

Description: Seismic data are primarily used in studies of the Earth's lithospheric structure including the Moho geometry. In regions, where seismic data are sparse or completely absent, gravimetric or combined gravimetric-seismic methods could be applied to determine the Moho depth. In this study, we derive and present generalized expressions for solving the Vening Meinesz–Moritz's (VMM) inverse problem of isostasy for a Moho depth determination from gravity and vertical gravity-gradient data. By solving the (non-linear) Fredholm's integral equation of the first kind, the linearized observation equations, which functionally relate the (given) gravity/gravity-gradient data to the (unknown) Moho depth, are derived in the spectral domain. The VMM gravimetric results are validated by using available seismic and gravimetric Moho models. Our results show that the VMM Moho solutions obtained by solving the VMM problem for gravity and gravity-gradient data are almost the same. This finding indicates that in global applications, using the global gravity/gravity-gradient data coverage, the spherical harmonic expressions for the gravimetric forward and inverse modelling yield (theoretically) the same results. Globally, these gravimetric solutions have also a relatively good agreement with the CRUST1.0 and GEMMA GOCE models in terms of their rms Moho differences (4.7 km and 4.1 km, respectively).

Description: Current DNA assembly methods for preparing highly purified linear subassemblies require complex and time-consuming in vitro manipulations that hinder their ability to construct megabase-sized DNAs (e.g. synthetic genomes). We have developed a new method designated ‘CasHRA ( Cas 9-facilitated H omologous R ecombination A ssembly)’ that directly uses large circular DNAs in a one-step in vivo assembly process. The large circular DNAs are co-introduced into Saccharomyces cerevisiae by protoplast fusion, and they are cleaved by RNA-guided Cas9 nuclease to release the linear DNA segments for subsequent assembly by the endogenous homologous recombination system. The CasHRA method allows efficient assembly of multiple large DNA segments in vivo ; thus, this approach should be useful in the last stage of genome construction. As a proof of concept, we combined CasHRA with an upstream assembly method (Gibson procedure of genome assembly) and successfully constructed a 1.03 Mb MGE-syn1.0 ( M inimal G enome of Escherichia coli ) that contained 449 essential genes and 267 important growth genes. We expect that CasHRA will be widely used in megabase-sized genome constructions.

Description: Geophysical techniques are widely used to monitor volcanic unrest. A number of studies have also demonstrated that hydrological processes can produce or trigger geophysical signals. Hydrologically induced gravity signals have previously been recorded by specifically designed gravity surveys as well as, inadvertently, by volcano monitoring studies. Water table corrections of microgravity surveys are commonplace. However, the fluctuations of the water table beneath survey locations are often poorly known, and such a correction fails to account for changes in water-mass storage in the unsaturated zone. Here, we combine 2-D axis-symmetrical numerical fluid-flow models with an axis-symmetric, distributed-mass, gravity calculation to model gravity changes in response to fluctuating hydrological recharge. Flow simulations are based on tropical volcanic settings where high surface permeabilities promote thick unsaturated zones. Our study highlights that mass storage (saturation) changes within the unsaturated zone beneath a survey point can generate recordable gravity changes. We show that for a tropical climate, recharge variations can generate gravity variations of over 150 μGal; although, we demonstrate that for the scenarios investigated here, the probability of recording such large signals is low. Our modelling results indicate that microgravity survey corrections based on water table elevation may result in errors of up to 100 μGal. The effect of inter-annual recharge fluctuations dominate over seasonal cycles which makes prediction and correction of the hydrological contribution more difficult. Spatial hydrogeological heterogeneity can also impact on the accuracy of relative gravity surveys, and can even result in the introduction of additional survey errors. The loading fluctuations associated with saturation variations in the unsaturated zone may also have implications for other geophysical monitoring techniques, such as geodetic monitoring of ground deformation.

Description: Bacteriophages are increasingly being used as water quality indicators. Two groups of phages infecting Escherichia coli , somatic and F-specific coliphages, are being considered as indicators of fecal and viral contamination for several types of water around the world. However, some uncertainties remain regarding which coliphages to assess. Recently, E. coli strain CB390 has been reported to be suitable for simultaneous detection of both groups, which seems to be more informative than determining only one of the groups. Here, a significant number of samples from different settings, mostly those where F-specific phages have been reported to outnumber somatic coliphages, are analyzed for somatic coliphages, F-specific RNA phages by standardized methods and coliphages detected by host strain CB390. The results presented here confirm that the numbers of phages counted using CB390 are equivalent to the sum of the somatic and F-specific coliphages counted independently in all settings. Hence the usefulness of this strain for simultaneous detection of somatic and F-specific coliphages is confirmed. Also, sets of data on the presence of coliphages in reclaimed and groundwater are reported.

Description: Several attempts have been made to obtain a radiographic image inside volcanoes using cosmic-ray muons (muography). Muography is expected to resolve highly heterogeneous density profiles near the surface of volcanoes. However, several prior works have failed to make clear observations due to contamination by background noise. The background contamination leads to an overestimation of the muon flux and consequently a significant underestimation of the density in the target mountains. To investigate the origin of the background noise, we performed a Monte Carlo simulation. The main components of the background noise in muography are found to be low-energy protons, electrons and muons in case of detectors without particle identification and with energy thresholds below 1 GeV. This result was confirmed by comparisons with actual observations of nuclear emulsions. This result will be useful for detector design in future works, and in addition some previous works of muography should be reviewed from the view point of background contamination.

Description: Essential to understanding sea level change and its causes during the last interglacial (LIG) is the quantification of uncertainties. In order to estimate the uncertainties, we develop a statistical framework for the comparison of palaeoclimatic sea level index points and GIA model predictions. For the investigation of uncertainties, as well as to generate better model predictions, we implement a massive ensemble approach by applying a data assimilation scheme based on particle filter methods. The different runs are distinguished through varying ice sheet reconstructions based on oxygen-isotope curves and different parameter selections within the GIA model. This framework has several advantages over earlier work, such as the ability to examine either the contribution of individual observations to the results or the probability of specific input parameters. This exploration of input parameters and data leads to a larger range of estimates than previously published work. We illustrate how the assumptions that enter into the statistical analysis, such as the existence of outliers in the observational database or the initial ice volume history, can introduce large variations to the estimate of the maximum highstand. Thus, caution is required to avoid overinterpreting results. We conclude that there are reasonable doubts whether the data sets previously used in statistical analyses are able to tightly constrain the value of maximum highstand during the LIG.

Description: A 3-D density model of the crust and upper mantle beneath the Karoo basin is presented here. The model is constrained using potential field, borehole and seismic data. Uplift of the basin by the end of the Cretaceous has resulted in an unusually high plateau (〉1000 m) covering a large portion of South Africa. Isostatic studies show the topography is largely compensated by changes in Moho depths (~35 km on-craton and 〉45 km off-craton) and changes in lithospheric mantle densities between the Kaapvaal Craton and surrounding regions (~50 kg m –3 increase from on- to off-craton). This density contrast is determined by inverted satellite gravity and gravity gradient data. The highest topography along the edge of the plateau (〉1200 m) and a strong Bouguer gravity low over Lesotho, however, can only be explained by a buoyant asthenosphere with a density decrease of around 40 kg m –3 .

Description: It is well known that Methylosinus trichosporium OB3b has two forms of methane monooxygenase (MMO) responsible for the initial conversion of methane to methanol, a cytoplasmic (soluble) methane monooxygenase and a membrane-associated (particulate) methane monooxygenase, and that copper strongly regulates expression of these alternative forms of MMO. More recently, it has been discovered that M. trichosporium OB3b has multiple types of the methanol dehydrogenase (MeDH), i.e. the Mxa-type MeDH (Mxa-MeDH) and Xox-type MeDH (Xox-MeDH), and the expression of these two forms is regulated by the availability of the rare earth element (REE), cerium. Here, we extend these studies and show that lanthanum, praseodymium, neodymium and samarium also regulate expression of alternative forms of MeDH. The effect of these REEs on MeDH expression, however, was only observed in the absence of copper. Further, a mutant of M. trichosporium OB3b, where the Mxa-MeDH was knocked out, was able to grow in the presence of lanthanum, praseodymium and neodymium, but was not able to grow in the presence of samarium. Collectively, these data suggest that multiple levels of gene regulation by metals exist in M. trichosporium OB3b, but that copper overrides the effect of other metals by an as yet unknown mechanism.

Description: Geothermal well GRT-1 (Rittershoffen, Alsace) was drilled in 2012. Its open-hole section (extending down to a depth of 2.6 km) penetrated fractured sandstones and granite. In 2013, the well was subjected to Thermal, Chemical and Hydraulic (TCH) stimulation, which improved the injectivity index fivefold. The goal of the study was to assess the impact of the stimulation by comparing pre- and post-stimulation well-logging (acoustic and temperature [ T ] logs) and mud-logging data. This comparison revealed modifications of almost all the natural fractures. However, not all of these fractures are associated with permeability enhancement, and the post-stimulation T logs are important for characterizing this enhancement. Chemical alteration due to mechanical erosion at the tops and bottoms of the fractures was observed in the sandstones. These zones display indications of very small new permeability after the TCH stimulation. Because a major fault zone caved extensively where it crosses the borehole, it was not imaged in the acoustic logs. However, this originally permeable zone was enhanced as demonstrated by the T logs. Based on the natural injectivity of this fault zone, hydraulic erosion and thermal microcracking of its internal quartz veins are associated with this permeability enhancement. Although local changes in the borehole wall observed in the acoustic images cannot be directly linked to the improved injectivity index, the comparison of the acoustic image logs allows for identification of fracture zones impacted by the TCH stimulation.

Description: We investigate the spatial coherence of underwater ambient noise using a yearlong time-series measured off Ascension Island. Qualitative agreement with observed cross-correlations is achieved using a simple range-dependent model, constrained by earlier, active tomographic studies in the area. In particular, the model correctly predicts the existence of two weakly dispersive normal modes in the microseism frequency range, with the group speed of one of the normal modes being smaller than the sound speed in water. The agreement justifies our interpretation of the peaks of the measured cross-correlation function of ambient noise as modal arrivals, with dispersion that is sensitive to crustal velocity structure. Our observations are consistent with Scholte to Moho head wave coupled propagation, with double mode conversion occurring due to the bathymetric variations between receivers. We thus demonstrate the feasibility of interrogating crustal properties using noise interferometry of moored hydrophone data at ranges in excess of 120 km.

Description: Recent tectonic reconstructions of the South Atlantic have partitioned the ocean basin into several segments based upon one or more proposed intraplate South American deformation zones. In several of these reconstructions, opening of the southern segment(s) by seafloor spreading prior to Aptian-Albian time is accompanied by contemporaneous strike-slip motion along an intraplate boundary extending southeastward from the Andean Cochabamba—Santa Cruz bend to the Rio Grande Fracture Zone (RGFZ). We have examined new magnetic data over the Pelotas, Santos and Campos Basins, offshore Argentina and Brazil, acquired by ION-GXT in tandem with long-offset, long record seismic reflection data, and identified seafloor spreading anomalies M4, M3, M2 and M0 (~131, ~129, ~128 and ~125 Ma). Integrating these results with our earlier work, we have been able to correlate magnetochrons M4, M3, M2 and M0 north and south of the RGFZ on the South American margin, and north and south of the Walvis Ridge on the African side. Our results are therefore inconsistent with diachronous opening models that involve substantial continental strike-slip motion north of RGFZ during M4 to M0 time. Although the ocean basin may have opened from south to north, our results indicate that seafloor spreading began north of the RGFZ earlier than previously proposed.

Description: We have investigated transcriptional interference between convergent genes in E. coli and demonstrate substantial interference for inter-promoter distances of as far as 3 kb. Interference can be elicited by both strong 70 dependent and T7 promoters. In the presented design, a strong promoter driving gene expression of a ‘forward’ gene interferes with the expression of a ‘reverse’ gene by a weak promoter. This arrangement allows inversely correlated gene expression without requiring further regulatory components. Thus, modulation of the activity of the strong promoter alters expression of both the forward and the reverse gene. We used this design to develop a dual selection system for conditional operator site binding, allowing positive selection both for binding and for non-binding to DNA. This study demonstrates the utility of this novel system using the Lac repressor as a model protein for conditional DNA binding, and spectinomycin and chloramphenicol resistance genes as positive selection markers in liquid culture. Randomized LacI libraries were created and subjected to subsequent dual selection, but mispairing IPTG and selection cues in respect to the wild-type LacI response, allowing the isolation of a LacI variant with a reversed IPTG response within three rounds of library generation and dual selection.

Description: A method to estimate the rotation change in the orientation of the centre-of-figure (CF) frame caused by earthquakes is proposed for the first time. This method involves using the point dislocation theory based on a spherical, non-rotating, perfectly elastic and isotropic (SNREI) Earth. The rotation change in the orientation is related solely to the toroidal displacements of degree one induced by the vertical dip slip dislocation, and the spheroidal displacements induced by an earthquake have no contribution. The effects of two recent large earthquakes, the 2004 Sumatra and the 2011 Tohoku-Oki, are studied. Results showed that the Sumatra and Tohoku-Oki earthquakes both caused the CF frame to rotate by at least tens of μas (micro-arc-second). Although the visible co-seismic displacements are identified and removed from the coordinate time-series, the rotation change due to the unidentified ones and errors in removal is non-negligible. Therefore, the rotation change in the orientation of the CF frame due to seismic deformation should be taken into account in the future in reference frame and geodesy applications.

Description: Determining thin layer thickness is very important for reservoir characterization and CO 2 quantification. Given its high time–frequency resolution and robustness, the complex spectral decomposition method was applied on time-lapse 3-D seismic data from the Ketzin pilot site for CO 2 storage to evaluate the frequency-dependent characteristics of thin layers at the injection level. Higher temporal resolution and more stratigraphic details are seen in the all-frequency and monochromatic reflectivity amplitude sections obtained by complex spectral decomposition compared to the stacked sections. The mapped geologic discontinuities within the reservoir are consistent with the preferred orientation of CO 2 propagation. Tuning frequency mapping shows the thicknesses of the reservoir sandstone and gaseous CO 2 is consistent with the measured thickness of the sandstone unit from well logging. An attempt to discriminate between pressure effects and CO 2 saturation using the extracted tuning frequency indicates that CO 2 saturation is the main contributor to the amplitude anomaly at the Ketzin site. On the basis of determined thickness of gaseous CO 2 in the reservoir, quantitative analysis of the amount of CO 2 was performed and shows a discrepancy between the injected and calculated CO 2 mass. This may be explained by several uncertainties, like structural reservoir heterogeneity, a limited understanding of the complex subsurface conditions, error of determined tuning frequency, the presence of ambient noise and ongoing CO 2 dissolution.

Description: In this study, we propose an approach for determining the geopotential difference using high-frequency-stability microwave links between satellite and ground station based on Doppler cancellation system. Suppose a satellite and a ground station are equipped with precise optical-atomic clocks (OACs) and oscillators. The ground oscillator emits a signal with frequency f a towards the satellite and the satellite receiver (connected with the satellite oscillator) receives this signal with frequency f b which contains the gravitational frequency shift effect and other signals and noises. After receiving this signal, the satellite oscillator transmits and emits, respectively, two signals with frequencies f b and f c towards the ground station. Via Doppler cancellation technique, the geopotential difference between the satellite and the ground station can be determined based on gravitational frequency shift equation by a combination of these three frequencies. For arbitrary two stations on ground, based on similar procedures as described above, we may determine the geopotential difference between these two stations via a satellite. Our analysis shows that the accuracy can reach 1 m 2 s – 2 based on the clocks’ inaccuracy of about 10 –17 (s s –1 ) level. Since OACs with instability around 10 –18 in several hours and inaccuracy around 10 –18 level have been generated in laboratory, the proposed approach may have prospective applications in geoscience, and especially, based on this approach a unified world height system could be realized with one-centimetre level accuracy in the near future.

Description: Polysulfides (S x 2– ) are sulfide oxidation intermediates that are important for a variety of environmentally relevant processes including pyrite formation, organic matter sulfidization, isotope exchange among reduced sulfur species, and metal chelation. In addition to their chemical reactivity, laboratory experiments with microbial cultures and enzymes indicate both indirect and direct roles for microorganisms in affecting polysulfide chemistry in natural environments through production and consumption. As polysulfides have been detected in a wide array of natural systems ranging from microbial mats to hydrothermal vents, constraining their biogeochemical cycling has broad impacts. However, many questions remain regarding the processes responsible for polysulfide dynamics in these environments and the precise role that microorganisms play in these processes. This review provides a summary of laboratory experiments investigating the role of polysulfides in microbial metabolism, and observations of polysulfides in the environment in order to provide further insight into and highlight open questions about this significant component of the sulfur cycle.

Description: Comprehensive analytical solutions to 3-D axisymmetric problems for static response of multilayered thermoelastic media subjected to surface loads and containing sources are presented in this study. The solution strategy employs Laplace and Hankel transforms to the field variables. The problem is formulated in cylindrical coordinate system and in this coordinate system vector surface harmonics and generalized propagator matrix are introduced to find the solution for the problem for the behaviour of thermoelastic multilayered media subject to surface loads and containing heat sources. A high-order adaptive Gaussian quadrature method with continued fraction expansions is employed to approximate the integral solutions expressed in terms of semi-infinite Hankel-type integrals. It is the first time to apply the proposed solution method to investigate the behaviour of repository for heat-emitting high-level nuclear waste (HLW) in a geological formation where the HLW can be regarded as a decaying with time point heat source.

Description: We present a series of processes for understanding and analysing controlled-source electromagnetic (CSEM) responses for a conductive and permeable earth. To realize the CSEM response, a new 3-D CSEM forward modelling algorithm based on an edge finite element method for both electrically conductive and magnetically permeable heterogeneities is developed. The algorithm shows highly accurate results in validation tests against a semi-analytic solution for stratified earth and an integral form of the scattered field. We describe the vector behaviour of an anomalous magnetic field originating from a conductive and permeable anomaly when the loop sources are deployed over a conductive half-space. The CSEM response of the conductive and permeable anomaly is classified into three effects originating from: conductivity perturbations, permeability perturbations and the coupling of these two effects. The separated individual results and the corresponding integral equation form of the anomalous field help to better understand the physical behaviour. We confirm the characteristic features of the CSEM response from the conductive and permeable anomaly, for example, (1) the general dominance of the induction effect in the out-of-phase response accompanied by a non-negligible magnetization effect from the magnetic anomaly in a conductive half-space and (2) the dominance of near frequency-independent magnetization effects in the in-phase response at relatively low frequencies and change in ruling part of the in-phase response into the induction effect as the frequency increases. We also demonstrate the effect of coupling mode and show that its maximum contribution is limited to a few per cent level of other two modes, induction and magnetization mode, even when the heterogeneity of our model is strong. In our synthetic survey, using examples of land-based profiling surveys of low induction number and intermediate regime, we find that the effect of magnetization can be used as an indicator of the existence of magnetic material. One important point to note from this study is the importance of accurate cancelling-out or estimation of free-space responses, which can mask the magnetic responses to imaging the varying magnetic property.

Description: A total of 65 spore-forming mercury-resistant bacteria were isolated from natural environments worldwide in order to understand the acquisition of additional genes by and dissemination of mercury resistance transposons across related Bacilli genera by horizontal gene movement. PCR amplification using a single primer complementary to the inverted repeat sequence of Tn MERI1 -like transposons showed that 12 of 65 isolates had a transposon-like structure. There were four types of amplified fragments: Tn 5084 , Tn 5085 , Tn d MER3 (a newly identified deleted transposon-like fragment) and Tn 6294 (a newly identified transposon). Tn d MER3 is a 3.5-kb sequence that carries a merRETPA operon with no merB or transposase genes. It is related to the mer operon of Bacillus licheniformis strain FA6-12 from Russia. DNA homology analysis shows that Tn 6294 is an 8.5-kb sequence that is possibly derived from Tn d MER3 by integration of a Tn MERI1 -type transposase and resolvase genes and in addition the merR2 and merB1 genes. Bacteria harboring Tn 6294 exhibited broad-spectrum mercury resistance to organomercurial compounds, although Tn 6294 had only merB1 and did not have the merB2 and merB3 sequences for organomercurial lyases found in Tn 5084 of B. cereus strain RC607. Strains with Tn 6294 encode mercuric reductase (MerA) of less than 600 amino acids in length with a single N-terminal mercury-binding domain, whereas MerA encoded by strains MB1 and RC607 has two tandem domains. Thus, Tn d MER3 and Tn 6294 are shorter prototypes for Tn MERI1 -like transposons. Identification of Tn 6294 in Bacillus sp. from Taiwan and in Paenibacillus sp. from Antarctica indicates the wide horizontal dissemination of Tn MERI1 -like transposons across bacterial species and geographical barriers.

Description: Extraction of fluids from subsurface reservoirs induces changes in pore pressure, leading not only to geomechanical changes, but also perturbations in seismic velocities and hence observable seismic attributes. Time-lapse seismic analysis can be used to estimate changes in subsurface hydromechanical properties and thus act as a monitoring tool for geological reservoirs. The ability to observe and quantify changes in fluid, stress and strain using seismic techniques has important implications for monitoring risk not only for petroleum applications but also for geological storage of CO 2 and nuclear waste scenarios. In this paper, we integrate hydromechanical simulation results with rock physics models and full-waveform seismic modelling to assess time-lapse seismic attribute resolution for dynamic reservoir characterization and hydromechanical model calibration. The time-lapse seismic simulations use a dynamic elastic reservoir model based on a North Sea deep reservoir undergoing large pressure changes. The time-lapse seismic traveltime shifts and time strains calculated from the modelled and processed synthetic data sets (i.e. pre-stack and post-stack data) are in a reasonable agreement with the true earth models, indicating the feasibility of using 1-D strain rock physics transform and time-lapse seismic processing methodology. Estimated vertical traveltime shifts for the overburden and the majority of the reservoir are within ±1 ms of the true earth model values, indicating that the time-lapse technique is sufficiently accurate for predicting overburden velocity changes and hence geomechanical effects. Characterization of deeper structure below the overburden becomes less accurate, where more advanced time-lapse seismic processing and migration is needed to handle the complex geometry and strong lateral induced velocity changes. Nevertheless, both migrated full-offset pre-stack and near-offset post-stack data image the general features of both the overburden and reservoir units. More importantly, the results from this study indicate that integrated seismic and hydromechanical modelling can help constrain time-lapse uncertainty and hence reduce risk due to fluid extraction and injection.

Description: A new plate motions model for the northwest Africa–North America Plate pair during the Oligocene and early Miocene is presented. The model is accompanied by a high-resolution isochron map for the central Atlantic region, resulting from a re-examination of 423 ship tracks from the NGDC data base for the area between the 15°20' FZ and the Azores triple junction. A new digital model of fracture zones for this region and a set of 309 magnetic profiles crossing the Oligocene to recent oceanic crust within the study area allowed to determine accurate finite reconstruction poles for the North America–northwest Africa conjugate plate pair between the early Miocene (Chron 6) and the early Oligocene (Chron 13). For times older than Chron 7 (~25 Ma), the finite reconstruction poles were calculated using a reliable data set coming exclusively from the region south of the Canary Islands FZ (~32°N), which allowed to test the rigidity of the northwest African oceanic lithosphere during the Oligocene–early Miocene phase of Atlas orogeny. A comparison of theoretical magnetic isochrons with observed magnetic lineations systematically shows that anomalously high spreading rates occurred in the area north of the Canary Islands FZ before Chron 7, thereby suggesting that the formation of the Atlas mountain, rather than being a localized intracontinental process, was logically linked to the central Atlantic spreading history. Thus, an independent Moroccan Plate could have existed during the Oligocene–early Miocene time interval, which included both the oceanic lithosphere north of the Canary Islands FZ and the northern Maghrebian areas of Morocco, Algeria and Tunisia. In this eventuality, the Atlas mountain belt should be reinterpreted as a giant flower structure associated with dextral transpression.

Description: Spectral induced polarization measurements are affected by temperature variations due to a variety of temperature-dependent parameters that control the complex electrical conductivity. Most important is the influence of the ion mobility, which increases with increasing temperature. It is responsible for the increase of the conductivity of the fluid in the pores with temperature and influences the electrical double layer on the mineral surface. This work is based on laboratory measurements of 13 sandstone samples from different sources with different geological and petrophysical characteristics. We measured the complex impedance in a frequency range from 0.01 to 100 Hz and a temperature range from 0 to 40 °C. The main observation is a decrease of the characteristic time (defined by the inverse of the frequency, at which the phase shift is maximum) with increasing temperature. The strength of this decrease differs from one sample to another. The temperature dependence of the phase shift magnitude cannot easily be generalized, as it depends on the particular sample. The experimental findings suggest that neglecting the influence of temperature on complex conductivity may lead to significant errors when estimating hydraulic conductivity from relaxation time. We also simulate the temperature dependence with a theoretical model of membrane polarization and review some of the model properties, with an emphasis on the temperature dependence of the parameters. The model reproduces several features characterizing the measured data, including the temperature dependence of the characteristic times. Computed tomography and microscope images of the pore structure of three samples also allow us to associate differences in the geometrical parameters used in the modelling with pore scale parameters of the actual samples.

Description: A sequence of large earthquakes occurred along the North Anatolian fault in the 20th century. These earthquakes, including the 1999 Izmit/Düzce earthquakes, generally propagated westward towards the Marmara Sea, defining the Main Marmara fault as a potential seismic gap. It is important to conduct a detailed assessment of the seismic hazards along the main Marmara fault because the megacity Istanbul lies only approximately 10 km north of the eastern segment of the Main Marmara fault, which is referred to as the Princes’ Islands Fault segment (PIF). Here, we study the locking status of this fault segment to evaluate the seismic hazard potential. For the first time, combined ascending and descending Interferometric Synthetic Aperture Radar and Global Positioning System observations were used to investigate the crustal deformation associated with the PIF. After careful corrections of the estimated ground velocity, a deformation pattern relating to fault locking near the Princes’ Islands was identified. The modeling results revealed that the slip rate and locking depth of the fault segment show a clear trade-off, which were estimated as 18.9 ± 7.2 mm yr –1 and 12.1 ± 7.0 km, respectively. With a moment accumulation rate of 1.7 ± 0.4  x  10 17 Nm yr –1 (proportional to the product of slip rate and locking depth), our results imply a build-up of a geodetic moment on the PIF and therefore a potential for earthquake hazards in the vicinity of the Istanbul megacity.

Description: Knowledge about the pressure dependency of elastic and electrical properties is important for a variety of geophysical applications. We present a technique to invert for the stiff and compliant porosity from velocity measurements made as a function of differential pressure on saturated sandstones. A dual porosity concept is used for dry rock compressibility and a squirt model is employed for the pressure and frequency dependent elastic properties of the rocks when saturated. The total porosity obtained from inversion shows satisfactory agreement with experimental results. The electrical cementation factor was determined using the inverted porosity in combination with measured electrical conductivity. It was found that cementation factor increased exponentially with increasing differential pressure during isostatic loading. Elastic compressibility, electrical cementation factor and electrical conductivity of the saturated rocks correlate linearly with compliant porosity, and electrical cementation factor and electrical conductivity exhibit linear correlations with elastic compressibility of the saturated rocks under loading. The results show that the dual porosity concept is sufficient to explain the pressure dependency of elastic, electrical and joint elastic-electrical properties of saturated porous sandstones.

Description: A new plate motions model for the northwest Africa–North America Plate pair during the Oligocene and early Miocene is presented. The model is accompanied by a high-resolution isochron map for the central Atlantic region, resulting from a re-examination of 423 ship tracks from the NGDC data base for the area between the 15°20' FZ and the Azores triple junction. A new digital model of fracture zones for this region and a set of 309 magnetic profiles crossing the Oligocene to recent oceanic crust within the study area allowed to determine accurate finite reconstruction poles for the North America–northwest Africa conjugate plate pair between the early Miocene (Chron 6) and the early Oligocene (Chron 13). For times older than Chron 7 (~25 Ma), the finite reconstruction poles were calculated using a reliable data set coming exclusively from the region south of the Canary Islands FZ (~32°N), which allowed to test the rigidity of the northwest African oceanic lithosphere during the Oligocene–early Miocene phase of Atlas orogeny. A comparison of theoretical magnetic isochrons with observed magnetic lineations systematically shows that anomalously high spreading rates occurred in the area north of the Canary Islands FZ before Chron 7, thereby suggesting that the formation of the Atlas mountain, rather than being a localized intracontinental process, was logically linked to the central Atlantic spreading history. Thus, an independent Moroccan Plate could have existed during the Oligocene–early Miocene time interval, which included both the oceanic lithosphere north of the Canary Islands FZ and the northern Maghrebian areas of Morocco, Algeria and Tunisia. In this eventuality, the Atlas mountain belt should be reinterpreted as a giant flower structure associated with dextral transpression.

Description: Microfluidics may revolutionize our ability to write synthetic DNA by addressing several fundamental limitations associated with generating novel genetic constructs. Here we report the first de novo synthesis and cell-free cloning of custom DNA libraries in sub-microliter reaction droplets using programmable digital microfluidics. Specifically, we developed Programmable Order Polymerization (POP), Microfluidic Combinatorial Assembly of DNA (M-CAD) and Microfluidic In-vitro Cloning (MIC) and applied them to de novo synthesis, combinatorial assembly and cell-free cloning of genes, respectively. Proof-of-concept for these methods was demonstrated by programming an autonomous microfluidic system to construct and clone libraries of yeast ribosome binding sites and bacterial Azurine, which were then retrieved in individual droplets and validated. The ability to rapidly and robustly generate designer DNA molecules in an autonomous manner should have wide application in biological research and development.

Description: Recent developments in synthetic biology have positioned lactic acid bacteria (LAB) as a major class of cellular chassis for applications. To achieve the full potential of LAB, one fundamental prerequisite is the capacity for rapid engineering of complex gene networks, such as natural biosynthetic pathways and multicomponent synthetic circuits, into which cellular functions are encoded. Here, we present a synthetic biology platform for rapid construction and optimization of large-scale gene networks in LAB. The platform involves a copy-controlled shuttle for hosting target networks and two associated strategies that enable efficient genetic editing and phenotypic validation. By using a nisin biosynthesis pathway and its variants as examples, we demonstrated multiplex, continuous editing of small DNA parts, such as ribosome-binding sites, as well as efficient manipulation of large building blocks such as genes and operons. To showcase the platform, we applied it to expand the phenotypic diversity of the nisin pathway by quickly generating a library of 63 pathway variants. We further demonstrated its utility by altering the regulatory topology of the nisin pathway for constitutive bacteriocin biosynthesis. This work demonstrates the feasibility of rapid and advanced engineering of gene networks in LAB, fostering their applications in biomedicine and other areas.

Description: Fungi may play an important role in the production of the greenhouse gas nitrous oxide (N 2 O). Bipolaris sorokiniana is a ubiquitous saprobe found in soils worldwide, yet denitrification by this fungal strain has not previously been reported. We aimed to test if B. sorokiniana would produce N 2 O and CO 2 in the presence of organic and inorganic forms of nitrogen (N) under microaerobic and anaerobic conditions. Nitrogen source (organic-N, inorganic-N, no-N control) significantly affected N 2 O and CO 2 production both in the presence and absence of oxygen, which contrasts with bacterial denitrification. Inorganic N addition increased denitrification of N 2 O (from 0 to 0.3 μg N 2 0-N h –1  g –1 biomass) and reduced respiration of CO 2 (from 0.1 to 0.02 mg CO 2 h –1  g –1 biomass). Isotope analyses indicated that nitrite, rather than ammonium or glutamine, was transformed to N 2 O. Results suggest the source of N may play a larger role in fungal N 2 O production than oxygen status.

Description: Legionella pneumophila is a pathogenic bacterium commonly found in water and responsible for severe pneumonia. Free-living amoebae are protozoa also found in water, which feed on bacteria by phagocytosis. Under favorable conditions, some L. pneumophila are able to resist phagocytic digestion and even multiply within amoebae. However, it is not clear whether L. pneumophila could infect at a same rate a large range of amoebae or if there is some selectivity towards specific amoebal genera or strains. Also, most studies have been performed using collection strains and not with freshly isolated strains. In our study, we assess the permissiveness of freshly isolated environmental strains of amoebae, belonging to three common genera (i.e. Acanthamoeba, Naegleria and Vermamoeba ), for growth of L. pneumophila at three different temperatures. Our results indicated that all the tested strains of amoebae were permissive to L. pneumophila Lens and that there was no significant difference between the strains. Intracellular proliferation was more efficient at a temperature of 40°C. In conclusion, our work suggests that, under favorable conditions, virulent strains of L. pneumophila could equally infect a large number of isolates of common freshwater amoeba genera.

Description: We present a distributed slip model for the 1999 M w 6.3 Chamoli earthquake of north India using interferometric synthetic aperture radar (InSAR) data from both ascending and descending orbits and Bayesian estimation of confidence levels and trade-offs of the model geometry parameters. The results of fault-slip inversion in an elastic half-space show that the earthquake ruptured a $9 _{ - 2.2}^{\circ + 3.4}$ northeast-dipping plane with a maximum slip of ~1 m. The fault plane is located at a depth of ~ $15.9_{ - 3.0}^{ + 1.1}$ km and is ~120 km north of the Main Frontal Thrust, implying that the rupture plane was on the northernmost detachment near the mid-crustal ramp of the Main Himalayan Thrust. The InSAR-determined moment is 3.35 x 10 18 Nm with a shear modulus of 30 GPa, equivalent to M w 6.3, which is smaller than the seismic moment estimates of M w 6.4–6.6. Possible reasons for this discrepancy include the trade-off between moment and depth, uncertainties in seismic moment tensor components for shallow dip-slip earthquakes and the role of earth structure models in the inversions. The released seismic energy from recent earthquakes in the Garhwal region is far less than the accumulated strain energy since the 1803 M s 7.5 earthquake, implying substantial hazard of future great earthquakes.

Description: Maximizing vertical resolution is a key objective in seismic data processing. Early deconvolution and spectral balancing algorithms assumed that the seismic source wavelet was temporally invariant, or stationary. In practice, seismic scattering and attenuation give rise to non-stationary seismic source wavelets. To address this issue, most conventional time-varying deconvolution wavelet shaping and spectral modelling techniques using the stationary polynomial fitting assume the wavelet to be locally stationary within a small number of overlapping analysis windows while the fitting coefficients are invariant with all the frequencies. In this paper, we show an improvement obtained by modelling smoothly varying spectra of the seismic wavelet using non-stationary polynomial fitting in the time–frequency domain. We first decompose each seismic trace using a generalized S-transform that provides a good time–frequency distribution for the estimation of the time-varying wavelet spectra. We then model the slowly varying source wavelet spectrum at each time sample by a smooth low-order polynomial. Finally, we spectrally balance the modelled wavelet to flatten the seismic response, thereby increasing vertical resolution. We calibrate the algorithm on a simple synthetic and then apply it to a 3-D land survey acquired in western China, showing the value on both vertical slices through seismic amplitude and attribute time slices. Our new algorithm significantly improves the vertical resolution of the seismic signal, while not increasing the noise.

Description: Knowledge about the pressure dependency of elastic and electrical properties is important for a variety of geophysical applications. We present a technique to invert for the stiff and compliant porosity from velocity measurements made as a function of differential pressure on saturated sandstones. A dual porosity concept is used for dry rock compressibility and a squirt model is employed for the pressure and frequency dependent elastic properties of the rocks when saturated. The total porosity obtained from inversion shows satisfactory agreement with experimental results. The electrical cementation factor was determined using the inverted porosity in combination with measured electrical conductivity. It was found that cementation factor increased exponentially with increasing differential pressure during isostatic loading. Elastic compressibility, electrical cementation factor and electrical conductivity of the saturated rocks correlate linearly with compliant porosity, and electrical cementation factor and electrical conductivity exhibit linear correlations with elastic compressibility of the saturated rocks under loading. The results show that the dual porosity concept is sufficient to explain the pressure dependency of elastic, electrical and joint elastic-electrical properties of saturated porous sandstones.

Description: We use a Bayesian formalism combined with a grid node discretization for the linear inversion of gravimetric data in terms of 3-D density distribution. The forward modelling and the inversion method are derived from seismological inversion techniques in order to facilitate joint inversion or interpretation of density and seismic velocity models. The Bayesian formulation introduces covariance matrices on model parameters to regularize the ill-posed problem and reduce the non-uniqueness of the solution. This formalism favours smooth solutions and allows us to specify a spatial correlation length and to perform inversions at multiple scales. We also extract resolution parameters from the resolution matrix to discuss how well our density models are resolved. This method is applied to the inversion of data from the volcanic island of Basse-Terre in Guadeloupe, Lesser Antilles. A series of synthetic tests are performed to investigate advantages and limitations of the methodology in this context. This study results in the first 3-D density models of the island of Basse-Terre for which we identify: (i) a southward decrease of densities parallel to the migration of volcanic activity within the island, (ii) three dense anomalies beneath Petite Plaine Valley, Beaugendre Valley and the Grande-Découverte-Carmichaël-Soufrière Complex that may reflect the trace of former major volcanic feeding systems, (iii) shallow low-density anomalies in the southern part of Basse-Terre, especially around La Soufrière active volcano, Piton de Bouillante edifice and along the western coast, reflecting the presence of hydrothermal systems and fractured and altered rocks.

Description: In order to perform gas exploration and determine the distribution pattern of gas in the Yanchang Oil Field in the eastern part of the North Shaanxi Slope, Ordos Basin, China, gravity and magnetic survey data were systemically collated, processed and interpreted in combination with the drilling data and recent seismic data. The genesis of gravity and magnetic anomalies and the relationship between the characteristics of the gravity and magnetic fields and known gas distribution were explored in order to predict the favourable exploration targets for gas. Gravity anomalies resulted both from the lateral variation in density of the basement rock and lateral lithologic transformation in the sedimentary cover. The regional magnetic anomalies were mainly caused by the basement metamorphic rocks and the residual magnetic anomalies may reflect the amount and general location of the volcanic materials in the overlying strata. The residual gravity and magnetic anomalies generated by high-density sandstone and high content of volcanics in the gas reservoir of the upper Paleozoic distorted and deformed the anomaly curves when they were stacked onto the primary background anomaly. The gas wells were generally found to be located in the anomaly gradient zones, or the distorted part of contour lines, and the flanks of high and low anomalies, or the transitional zones between anomaly highs and lows. The characteristics of gravity and magnetic fields provide significant information that can be used for guidance when exploring the distribution of gas. Based on these characteristics, five favourable areas for gas exploration were identified; these are quasi-equally spaced like a strip extending from the southeast to the northwest.

Description: We compute the gravimetric factor at the Chandler wobble (CW) frequency using time-series from superconducting gravimeters (SG) longer than a decade. We first individually process the polar motion and data at each individual gravity station to estimate the gravimetric factor amplitude and phase, then we make a global analysis by applying a stacking method to different subsets of up to seven SG stations. The stacking is an efficient way of getting rid of local effects and improving the signal-to-noise ratio of the combined data sets. Using the stacking method, we find a gravimetric factor amplitude and phase of 1.118 ± 0.016 and –0.45 ± 0.66 deg, respectively, which is smaller in amplitude than expected. The sources of error are then carefully considered. For both local and global analyses, the uncertainties on our results are reliably constrained by computing the standard deviation of the estimates of the gravimetric factor amplitude and phase for increasing length of the time-series. Constraints on the CW anelastic dissipation can be set since any departure of the gravimetric factor from its elastic value may provide some insights into the dissipative processes that occur at the CW period. In particular, assuming given rheological models for the Earth's mantle enables us to make the link between the gravimetric factor phase and the CW quality factor.

Description: Spectral induced polarization measurements are affected by temperature variations due to a variety of temperature-dependent parameters that control the complex electrical conductivity. Most important is the influence of the ion mobility, which increases with increasing temperature. It is responsible for the increase of the conductivity of the fluid in the pores with temperature and influences the electrical double layer on the mineral surface. This work is based on laboratory measurements of 13 sandstone samples from different sources with different geological and petrophysical characteristics. We measured the complex impedance in a frequency range from 0.01 to 100 Hz and a temperature range from 0 to 40 °C. The main observation is a decrease of the characteristic time (defined by the inverse of the frequency, at which the phase shift is maximum) with increasing temperature. The strength of this decrease differs from one sample to another. The temperature dependence of the phase shift magnitude cannot easily be generalized, as it depends on the particular sample. The experimental findings suggest that neglecting the influence of temperature on complex conductivity may lead to significant errors when estimating hydraulic conductivity from relaxation time. We also simulate the temperature dependence with a theoretical model of membrane polarization and review some of the model properties, with an emphasis on the temperature dependence of the parameters. The model reproduces several features characterizing the measured data, including the temperature dependence of the characteristic times. Computed tomography and microscope images of the pore structure of three samples also allow us to associate differences in the geometrical parameters used in the modelling with pore scale parameters of the actual samples.

Description: The streaming potential phenomenon is produced by the flow of an electrolyte in a porous medium and is used for geophysical prospecting. It is quantified through an electrokinetic (EK) coefficient. The dependence of the EK coefficient on the conductivity of the electrolyte is described by the Helmholtz–Smoluchowski (HS) equation. This equation provides successful forecasts of the EK coefficient in the standard range of concentration. However, experimental measurements show deviations to this equation at extreme low and extreme high salinities. The aim of this study is to model the EK coefficient using Lattice Boltzmann simulations in a 2-D capillary channel, with a view to understanding these deviations. The effect of the constitutive parameters of the HS equation such as the permittivity and the viscosity is discussed. The validity of the HS equation using strong potentials is assessed. Finally, a model of bulk fluid conductivity is derived. This model allows to take into account the change of local ionic distribution in the vicinity of the mineral. It appears to have a significant impact on the derivation of potentials at low salinities and in the presence of polyvalent counterions.

Description: Analysing independent 1-yr data sets of 10 European superconducting gravimeters (SG) reveals statistically significant temporal variations of M2 tidal parameters. Both common short-term (〈2 yr) and long-term (〉2 yr) features are identified in all SG time-series but one. The averaged variations of the amplitude factor are about 0.2. The path of load vector variations equivalent to the temporal changes of tidal parameters suggests the presence of an 8.85 yr modulation (lunar perigee). The tidal waves having the potential to modulate M2 with this period belong to the 3rd degree constituents. Their amplitude factors turn out to be much closer to body tide model predictions than that of the main 2nd degree M2, which indicates ocean loading for 3rd degree waves to be less prominent than for 2nd degree waves within the M2 group. These two different responses to the loading suggest that the observed modulation is more due to insufficient frequency resolution of limited time-series rather than to time variable loading. Presently, SG gravity time-series are still too short to prove if time variable loading processes are involved too as in case of the annual M2 modulation known to appear for analysis intervals of less than 1 yr. Whatever the variations are caused by, they provide the upper accuracy limit for earth model validation and permit estimating the temporal stability of SG scale factors and assessing the quality of gravity time-series.

Description: Extraction of fluids from subsurface reservoirs induces changes in pore pressure, leading not only to geomechanical changes, but also perturbations in seismic velocities and hence observable seismic attributes. Time-lapse seismic analysis can be used to estimate changes in subsurface hydromechanical properties and thus act as a monitoring tool for geological reservoirs. The ability to observe and quantify changes in fluid, stress and strain using seismic techniques has important implications for monitoring risk not only for petroleum applications but also for geological storage of CO 2 and nuclear waste scenarios. In this paper, we integrate hydromechanical simulation results with rock physics models and full-waveform seismic modelling to assess time-lapse seismic attribute resolution for dynamic reservoir characterization and hydromechanical model calibration. The time-lapse seismic simulations use a dynamic elastic reservoir model based on a North Sea deep reservoir undergoing large pressure changes. The time-lapse seismic traveltime shifts and time strains calculated from the modelled and processed synthetic data sets (i.e. pre-stack and post-stack data) are in a reasonable agreement with the true earth models, indicating the feasibility of using 1-D strain rock physics transform and time-lapse seismic processing methodology. Estimated vertical traveltime shifts for the overburden and the majority of the reservoir are within ±1 ms of the true earth model values, indicating that the time-lapse technique is sufficiently accurate for predicting overburden velocity changes and hence geomechanical effects. Characterization of deeper structure below the overburden becomes less accurate, where more advanced time-lapse seismic processing and migration is needed to handle the complex geometry and strong lateral induced velocity changes. Nevertheless, both migrated full-offset pre-stack and near-offset post-stack data image the general features of both the overburden and reservoir units. More importantly, the results from this study indicate that integrated seismic and hydromechanical modelling can help constrain time-lapse uncertainty and hence reduce risk due to fluid extraction and injection.

Description: A sequence of large earthquakes occurred along the North Anatolian fault in the 20th century. These earthquakes, including the 1999 Izmit/Düzce earthquakes, generally propagated westward towards the Marmara Sea, defining the Main Marmara fault as a potential seismic gap. It is important to conduct a detailed assessment of the seismic hazards along the main Marmara fault because the megacity Istanbul lies only approximately 10 km north of the eastern segment of the Main Marmara fault, which is referred to as the Princes’ Islands Fault segment (PIF). Here, we study the locking status of this fault segment to evaluate the seismic hazard potential. For the first time, combined ascending and descending Interferometric Synthetic Aperture Radar and Global Positioning System observations were used to investigate the crustal deformation associated with the PIF. After careful corrections of the estimated ground velocity, a deformation pattern relating to fault locking near the Princes’ Islands was identified. The modeling results revealed that the slip rate and locking depth of the fault segment show a clear trade-off, which were estimated as 18.9 ± 7.2 mm yr –1 and 12.1 ± 7.0 km, respectively. With a moment accumulation rate of 1.7 ± 0.4  x  10 17 Nm yr –1 (proportional to the product of slip rate and locking depth), our results imply a build-up of a geodetic moment on the PIF and therefore a potential for earthquake hazards in the vicinity of the Istanbul megacity.

Description: Deformation analysis in general and strain analysis in particular using permanent GPS networks require proper analysis of time-series in which all functional effects are taken into consideration and all stochastic effects are captured using an appropriate noise model. This contribution addresses both issues when considering the strain parameters of a GPS network. Estimates of spatial correlation, time correlated noise, and multivariate power spectrum for daily position time-series of the Southern California Integrated GPS Network (SCIGN) stations collected between 1996 and 2011 are obtained. Significant signals with periods of 13.63 d and those related to the GPS draconitic year are identified in these time-series. We aim to assess the effect of a realistic noise model of the series on the uncertainties of the strain parameters including displacements, normal and shear strains, and rotations. For the SCIGN network considered, the following results are highlighted. Contrary to the common belief, the uncertainties of the displacements parameters become smaller when taking a realistic noise model into account. This however was not the case when assessing the noise characteristics of the normal and shear strain, and rotation parameters. The uncertainties increase nearly by a factor of two, in agreement to what is expected. Some of the significant deformation parameters of the white noise model become less significant in case of the realistic noise model.

Description: We have extended backwards from 2001 to 1979 the current release 05 (RL05) of the Gravity Recovery and Climate Experiment (GRACE) Atmospheric and Oceanic De-aliasing Level-1B (AOD1B) product and studied the impact of this and a previous release 04 (RL04) of the AOD1B product on precise orbits of five altimetry satellites (ERS-1, ERS-2, TOPEX/Poseidon, Envisat and Jason-1) for the time span 1991–2012, as compared to the case when no AOD1B product is used. We have found that using AOD1B RL05 product reduces root mean square (RMS) fits of satellite laser ranging (SLR) observations by about 1.0–6.4 per cent, 2-d arc overlaps in radial, cross-track and along-track directions by about 1.3–12.0, 0.3–10.0 and 2.0–10.0 per cent, respectively, for various satellites tested, as compared to the case without AOD1B product. Using AOD1B RL05 product instead of RL04 one reduces SLR RMS fits by 0.1–0.7 per cent, 2-d arc overlaps in radial, cross-track and along-track directions by 0.1–0.6, 0.1–1.3 and 0.2–1.2 per cent, respectively, for the satellite orbits tested. The multi-mission crossover analysis shows that the application of an AOD1B product reduces the scatter of radial errors by 0.4–2.8 per cent for the satellite missions studied. At the regions with the most pronounced changes the use of the AOD1B products improves the consistency between the sea level as measured by the TOPEX and ERS-2 missions and by the Jason-1 and Envisat missions by 5 to 10 per cent (globally by about 2 per cent). The results of our study show that extended AOD1B RL05 product performs better than the AOD1B RL04 and improves orbits of altimetry satellites and consistency of sea level products.

Description: A new analytical method for the computation of a truncated series of solid spherical harmonic coefficients (HCs) from data on a spheroid (i.e. an oblate ellipsoid of revolution) is derived, using a transformation between surface and solid spherical HCs. A two-step procedure is derived to extend this transformation beyond degree and order (d/o) 520. The method is compared to the Hotine–Jekeli transformation in a numerical study based on the EGM2008 global gravity model. Both methods are shown to achieve submicrometre precision in terms of height anomalies for a model to d/o 2239. However, both methods result in spherical harmonic models that are different by up to 7.6 mm in height anomalies and 2.5 mGal in gravity disturbances due to the different coordinate system used. While the Hotine–Jekeli transformation requires the use of an ellipsoidal coordinate system, the new method uses only spherical polar coordinates. The Hotine–Jekeli transformation is numerically more efficient, but the new method can more easily be extended to cases where (a linear combination of) normal derivatives of the function under consideration are given on the surface of the spheroid. It therefore provides a solution to many types of ellipsoidal boundary-value problems in the spectral domain.

Description: We study the accuracy and numerical stability of three eigenvector sets for modelling the coupled poroelastic and electromagnetic layered-Earth response. We use a known eigenvector set, its flux-normalized version and a newly derived flux-normalized set. The new set is chosen such that the system is properly uncoupled when the coupling between the poroelastic and electromagnetic fields vanishes. We carry out two different numerical stability tests: the first test focuses on the internal system, eigenvector and eigenvalue consistency; the second test investigates the stability and preciseness of the flux-normalized systems by looking at identity relations. We find that the known set shows the largest deviation for both tests, whereas the new set performs best. In two additional numerical modelling experiments, these numerical inaccuracies are shown to generate numerical noise levels comparable to small signals, such as signals coming from the important interface conversion responses, especially when the coupling coefficient is small. When coupling vanishes completely, the known set does not produce proper results. The new set produces numerically stable and accurate results in all situations. We therefore strongly recommend to use this newly derived set for future layered-Earth seismo-electromagnetic modelling experiments.

Description: The Quaternary Añavieja-Dévanos tufa system is located in the northern sector of the Iberian Chain. It has been previously tackled by means sedimentological studies focused on the available outcrops and some boreholes. They have permitted the proposal of a sedimentary scenario that fits with a pool-barrage fluvial tufa model. However a better knowledge of the characteristics and internal distribution of the usually non-outcropping pool deposits as well as of its relationship with barrage deposits has not been evaluated in detail yet. Palaeoenvironmental studies on tufas are usually biased because tufas are commonly delicate facies exposed to intense erosion during water level fall stages; for this reason outcrops are usually scarce and very often coincide with the most cemented barrage deposits. In order to analyse the internal characteristics of the tufa deposits under study, but also the lateral correlation among different facies, ground penetrating radar (GPR) has been employed both for the evaluation of its applicability in such kind of environments and to improve, if possible, the sedimentary model using geophysical data in sectors without outcrops. A GPR survey including different antennas ranging from 50 to 500 MHz along different sectors and its comparison with natural outcrops has been carried out. GPR results have permitted to deduce clear differences between pool and barrage deposits and to recognise its internal structure and geometrical relationships. The survey also permitted an approach to different scales of heterogeneities in the radarfacies evaluation by using distinct antennas and therefore, reaching different resolutions and penetrations. The resulting integration from different antennas allows three different attenuant and eight reflective radarfacies to be defined permitting a better approach to the real extension of the pool areas. These results have permitted to decipher the horizontal and vertical facies changes and the identification of a scarcer development of pool deposits than expected in the studied system.

Description: Two novel transient controlled source electromagnetic methods called circular electrical dipole (CED) and differential electrical dipole (DED) are theoretically analysed for applications in shallow marine environments. 1-D and 3-D time-domain modelling studies are used to investigate the detectability and applicability of the methods when investigating resistive layers/targets representing hydrocarbon-saturated formations. The results are compared to the conventional time-domain horizontal electrical dipole (HED) and vertical electrical dipole (VED) sources. The applied theoretical modelling studies demonstrate that CED and DED have higher signal detectability towards resistive targets compared to TD-CSEM, but demonstrate significantly poorer signal amplitudes. Future CED/DED applications will have to solve this issue prior to measuring. Furthermore, the two novel methods have very similar detectability characteristics towards 3-D resistive targets embedded in marine sediments as VED while being less susceptible towards non-verticality. Due to the complex transmitter design of CED/DED the systems are prone to geometrical errors. Modelling studies show that even small transmitter inaccuracies have strong effects on the signal characteristics of CED making an actual marine application difficult at the present time. In contrast, the DED signal is less affected by geometrical errors in comparison to CED and may therefore be more adequate for marine applications.

Description: Growth media have been developed to facilitate the enrichment and isolation of acidophilic and acid-tolerant sulfate-reducing bacteria (aSRB) from environmental and industrial samples, and to allow their cultivation in vitro . The main features of the ‘standard’ solid and liquid devised media are as follows: (i) use of glycerol rather than an aliphatic acid as electron donor; (ii) inclusion of stoichiometric concentrations of zinc ions to both buffer pH and to convert potentially harmful hydrogen sulphide produced by the aSRB to insoluble zinc sulphide; (iii) inclusion of Acidocella aromatica (an heterotrophic acidophile that does not metabolize glycerol or yeast extract) in the gel underlayer of double layered (overlay) solid media, to remove acetic acid produced by aSRB that incompletely oxidize glycerol and also aliphatic acids (mostly pyruvic) released by acid hydrolysis of the gelling agent used (agarose). Colonies of aSRB are readily distinguished from those of other anaerobes due to their deposition and accumulation of metal sulphide precipitates. Data presented illustrate the effectiveness of the overlay solid media described for isolating aSRB from acidic anaerobic sediments and low pH sulfidogenic bioreactors.