ALBERT

Description: This review article aims to provide an overview and insight into the most relevant aspects of wind energy development and current state-of-the-art. The industry is in a very mature stage, so it seems to be the right time to take stock of the relevant areas of wind energy use for power generation. For this review, the authors considered the essential aspects of the development of wind energy technology: research, modeling, and prediction of wind speed as an energy source, the technology development of the plants divided into the mechanical and electrical systems and the plant control, and finally the optimal plant operation including the maintenance strategies. The focus is on the development in Europe, with a partial focus on Germany. The authors are employees of the Fraunhofer Institutes, Institute for Energy Economics and Energy Systems Technology and Institute for Wind Energy Systems, who have contributed to the development of this technology for decades.

Description: Understanding mechanical interactions between hydrate and hosting sediments is critical for evaluating formation stability and associated environmental impacts of hydrate-bearing sediments during gas production. While core-scale studies of hydrate-bearing sediments are readily available and some explanations of observed results rely on pore-scale behavior of hydrate, actual pore-scale observations supporting the larger-scale phenomena are rarely available for hydrate-bearing sediments, especially with methane as guest molecules. The primary reasons for the scarcity include the challenge of developing tools for small-scale testing apparatus and pore-scale visualization capability. We present a testing assembly that combines pore-scale visualization and triaxial test capability of methane hydrate-bearing sediments. This testing assembly allows temperature regulation and independent control of four pressures: influent and effluent pore pressure, confining pressure, and axial pressure. Axial and lateral effective stresses can be applied independently to a 9.5 mm diameter and 19 mm long specimen while the pore pressure and temperature are controlled to maintain the stability of methane hydrate. The testing assembly also includes an X-ray transparent beryllium core holder so that 3D computed tomography scanning can be conducted during the triaxial loading. This testing assembly permits pore-scale exploration of hydrate-sediment interaction in addition to the traditional stress-strain relationship. Exemplary outcomes are presented to demonstrate applications of the testing assembly on geomechanical property estimations of methane-hydrate bearing sediments.

Description: High-resolution 3D (HR3D) seismic data are important for hydrocarbon exploration of shallow reservoirs, site characterization, and geohazard assessments. The goal of this contribution is to identify and quantify the parameters to increase the resolution of HR3D seismic data to meter scale. The main acquisition parameters controlling the resolution of the collected data are the spectrum of the seismic source, source-receiver offset range, and trace density. An evolution to one-meter-scale resolution of 3D seismic will rely on combining a reproducible seismic source with high frequencies up to at least 600 Hz, a high uniform trace density of more than 4 million traces per square kilometer, and an offset range shorter than approximately 200 m. The resulting 3D seismic data volume will reach meter-scale resolution for water and target depths of less than 600 m. The proposed HR3D system will be suitable for 3D and 4D characterization of seabed properties and shallow stratigraphy, the identification of geohazards and hydrocarbon leakage, and monitoring the environmental impact of offshore activities. The P-Cable 3D system is an excellent starting point for achieving one-meter-scale resolution due to its flexible and tight meter-scale shot and receiver spacing.

Description: The Green's function (GF) for the scalar wave equation is numerically constructed by an advanced geometric ray-tracing method based on the eikonal approximation related to the semiclassical propagator. The underlying theory is first briefly introduced, and then it is applied to acoustics and implemented in a ray-tracing-type numerical simulation. The so constructed numerical method is systematically used to calculate the sound field in a rectangular (cuboid) room, yielding also the acoustic modes of the room. The simulated GF is rigorously compared to its analytic approximation. Good agreement is found, which proves the devised numerical approach potentially useful also for low frequency acoustic modeling, which is in practice not covered by geometrical methods.

Description: Responses obtained in consonant perception experiments typically show a large variability across stimuli of the same phonetic identity. The present study investigated the influence of different potential sources of this response variability. It was distinguished between source-induced variability, referring to perceptual differences caused by acoustical differences in the speech tokens and/or the masking noise tokens, and receiver-related variability, referring to perceptual differences caused by within- and across-listener uncertainty. Consonant-vowel combinations consisting of 15 consonants followed by the vowel /i/ were spoken by two talkers and presented to eight normal-hearing listeners both in quiet and in white noise at six different signal-to-noise ratios. The obtained responses were analyzed with respect to the different sources of variability using a measure of the perceptual distance between responses. The speech-induced variability across and within talkers and the across-listener variability were substantial and of similar magnitude. The noise-induced variability, obtained with time-shifted realizations of the same random process, was smaller but significantly larger than the amount of within-listener variability, which represented the smallest effect. The results have implications for the design of consonant perception experiments and provide constraints for future models of consonant perception.

Description: Eutrophication combined with climate change has caused ephemeral filamentous macroalgae to increase and drifts of seaweed cover large areas of some Baltic Sea sites during summer. In ongoing projects, these mass occurrences of drifting filamentous macroalgae are being harvested to mitigate eutrophication, with preliminary results indicating considerable nutrient reduction potential. In the present study, an energy assessment was made of biogas production from the retrieved biomass for a Baltic Sea pilot case. Use of different indicators revealed a positive energy balance. The energy requirements corresponded to about 30%–40% of the energy content in the end products. The net energy gain was 530–800 MJ primary energy per ton wet weight of algae for small-scale and large-scale scenarios, where 6 000 and 13 000 tonnes dwt were harvested, respectively. However, the exergy efficiency differed from the energy efficiency, emphasising the importance of taking energy quality into consideration when evaluating energy systems. An uncertainty analysis indicated parametric uncertainty of about 25%–40%, which we consider to be acceptable given the generally high sensitivity of the indicators to changes in input data, allocation method, and system design. Overall, our evaluation indicated that biogas production may be a viable handling strategy for retrieved biomass, while harvesting other types of macroalgae than red filamentous species considered here may render a better energy balance due to higher methane yields.