ALBERT

Description: Improving fingerprint matching algorithms is an active and important research area in fingerprint recognition. Algorithms based on minutia triplets, an important matcher family, present some drawbacks that impact their accuracy, such as dependency to the order of minutiae in the feature, insensitivity to the reflection of minutiae triplets, and insensitivity to the directions of the minutiae relative to the sides of the triangle. To alleviate these drawbacks, we introduce in this paper a novel fingerprint matching algorithm, named M3gl. This algorithm contains three components: a new feature representation containing clockwise-arranged minutiae without a central minutia, a new similarity measure that shifts the triplets to find the best minutiae correspondence, and a global matching procedure that selects the alignment by maximizing the amount of global matching minutiae. To make M3gl faster, it includes some optimizations to discard non-matching minutia triplets without comparing the whole representation. In comparison with six verification algorithms, M3gl achieves the highest accuracy in the lowest matching time, using FVC2002 and FVC2004 databases.

Description: Pollution of drinking water sources represents a continuously emerging problem in global environmental protection. Novel techniques for real-time monitoring of water quality, capable of the detection of unanticipated toxic and bioactive substances, are urgently needed. In this study, the applicability of a cell-based sensor system using selected eukaryotic cell lines for the detection of aquatic pollutants is shown. Readout parameters of the cells were the acidification (metabolism), oxygen consumption (respiration) and impedance (morphology) of the cells. A variety of potential cytotoxic classes of substances (heavy metals, pharmaceuticals, neurotoxins, waste water) was tested with monolayers of L6 cells (rat myoblasts). The cytotoxicity or cellular effects induced by inorganic ions (Ni2+ and Cu2+) can be detected with the metabolic parameters acidification and respiration down to 0.5 mg/L, whereas the detection limit for other substances like nicotine and acetaminophen are rather high, in the range of 0.1 mg/L and 100 mg/L. In a close to application model a real waste water sample shows detectable signals, indicating the existence of cytotoxic substances. The results support the paradigm change from single substance detection to the monitoring of overall toxicity.

Description: Small noncoding microRNAs (miRNAs) are important regulators of post-transcriptional gene regulation and have altered the prevailing view of a linear relationship between gene and protein expression. Aberrant miRNA expression is an emerging theme for a wide variety of diseases, highlighting the fundamental role played by miRNAs in both physiological and pathological states. The identification of stable miRNAs in bodily fluids paved the way for their use as novel biomarkers amenable to clinical diagnosis in translational medicine. Identification of miRNAs in exosomes that are functional upon delivery to the recipient cells has highlighted a novel method of intercellular communication. Delivery of miRNAs to recipient cells via blood, with functional gene regulatory consequences, opens up novel avenues for target intervention. Exosomes thus offer a novel strategy for delivering drugs or RNA therapeutic agents. Though much work lies ahead, circulating miRNAs are unequivocally ushering in a new era of novel biomarker discovery, intercellular communication mechanisms, and therapeutic intervention strategies.

Description: In this paper, a novel principle of contactless gauge block calibration is presented. The principle of contactless gauge block calibration combines low-coherence interferometry and laser interferometry. An experimental setup combines Dowell interferometer and Michelson interferometer to ensure a gauge block length determination with direct traceability to the primary length standard. By monitoring both gauge block sides with a digital camera gauge block 3D surface measurements are possible too. The principle presented is protected by the Czech national patent No. 302948.

Description: Quorum sensing (QS) is a population density-dependent regulatory mechanism in which gene expression is coupled to the accumulation of a chemical signaling molecule. QS systems are widespread among the plant soft-rotting bacteria. In Pectobacterium carotovorum, at least two QS systems exist being specified by the nature of chemical signals involved. QS in Pectobacterium carotovorum uses N-acylhomoserine lactone (AHL) based, as well as autoinducer-2 (AI-2) dependent signaling systems. This review will address the importance of the QS in production of virulence factors and interaction of QS with other regulatory systems in Pectobacterium carotovorum.

Description: Optical fibers possess many advantages such as small size, light weight and immunity to electro-magnetic interference that meet the sensing requirements to a large extent. In this investigation, a Mach-Zehnder interferometric optical fiber sensor is used to measure the dynamic strain of a vibrating cantilever beam. A 3 × 3 coupler is employed to demodulate the phase shift of the Mach-Zehnder interferometer. The dynamic strain of a cantilever beam subjected to base excitation is determined by the optical fiber sensor. The experimental results are validated with the strain gauge.

Description: Joint estimation of direction-of-arrival (DOA) and polarization with electromagnetic vector-sensors (EMVS) is considered in the framework of complex-valued non-orthogonal joint diagonalization (CNJD). Two new CNJD algorithms are presented, which propose to tackle the high dimensional optimization problem in CNJD via a sequence of simple sub-optimization problems, by using LU or LQ decompositions of the target matrices as well as the Jacobi-type scheme. Furthermore, based on the above CNJD algorithms we present a novel strategy to exploit the multi-dimensional structure present in the second-order statistics of EMVS outputs for simultaneous DOA and polarization estimation. Simulations are provided to compare the proposed strategy with existing tensorial or joint diagonalization based methods.

Description: Interface-formation processes in atomic layer deposition (ALD) of Al2O3 on InGaAs surfaces were investigated using on-line Auger electron spectroscopy. Al2O3 ALD was carried out by repeating a cycle of Al(CH3)3 (trimethylaluminum, TMA) adsorption and oxidation by H2O. The first two ALD cycles increased the Al KLL signal, whereas they did not increase the O KLL signal. Al2O3 bulk-film growth started from the third cycle. These observations indicated that the Al2O3/InGaAs interface was formed by reduction of the surface oxides with TMA. In order to investigate the effect of surface-oxide reduction on metal-insulator-semiconductor (MIS) properties, capacitors and field-effect transistors (FETs) were fabricated by changing the TMA dosage during the interface formation stage. The frequency dispersion of the capacitance-voltage characteristics was reduced by employing a high TMA dosage. The high TMA dosage, however, induced fixed negative charges at the MIS interface and degraded channel mobility.

Description: This study assessed the concentrations of cadmium in the gills, livers and muscles of a commercially important tilapia fish (Sarotherodon melanotheron) from Aby Lagoon in Adiaké, Côte d’Ivoire, between January and December, 2010. The organisms were grouped into two composite samples (juvenile and adult) of five individuals. Levels of cadmium were determined in tissues using Perkin-Elmer (AAnalyst 200) Atomic Absorption Spectrophotometry (AAS) after a digestion method. Fish muscle appeared to have a significantly higher tendency to accumulate cadmium (1.19–5.18 µg/g dw) while gills and livers had minimum concentrations (0.07–1.32 and 0.12–1.25 µg/g dw). This study has revealed that the concentrations of Cd in Sarotherodon melanotheron muscle tissue were above the maximum acceptable concentrations for human consumption, thus precautions need to be taken in order to prevent future contamination.

Description: This article focuses on user experiences on reading location-aware news on the mobile platform and aims to explore what experiences this kind of locative journalism generates and how such experiences change the users’ social interaction with news. We produced a specially designed mobile application and tailored news stories specific to this project called LocaNews in order to explore participants’ relation to the content in this journalistic format. The result is generated through a field study and a questionnaire of 32 people to find out how they experience the news presented in this format. The user participants’ responses are analyzed based on their news experiences, contextualizing places and their social interaction with the news within this form of journalism. Results showed that the local, semi-local and non-local user approaches the locative news in a different manner, but that the average user found this kind of news more interesting and more informative than ordinary news. The participants also have a problem identifying this as journalism, rather than an information service.

Description: The present study aims to develop a thermoeconomic-based approach for optimization of steam levels in a steam production and distribution system by use of the specific exergy costing (SPECO) method for determining optimum steam levels to minimize the cost caused by exergy destruction. In the field of total site optimization, incremental cost of the utility system caused by exergy destruction has been selected as an objective function and the result is compared with the case that energy minimization has been selected as the prime objective. The steam levels are optimized considering steam demand at each level, output power generated by turbines, boiler duty, fuel and cold utility requirements as well as capital cost of equipments. The analysis showed that thermoeconomic (exergoeconomic) approach in optimization not only can change the optimum structure of steam levels but also may reduce the total cost of utility system up to 8%.

Description: The development of a rapid, sensitive, specific method for the foodborne pathogenic bacteria detection is of great importance to ensure food safety and security. In recent years impedimetric biosensors which integrate biological recognition technology and impedance have gained widespread application in the field of bacteria detection. This paper presents an overview on the progress and application of impedimetric biosensors for detection of foodborne pathogenic bacteria, particularly the new trends in the past few years, including the new specific bio-recognition elements such as bacteriophage and lectin, the use of nanomaterials and microfluidics techniques. The applications of these new materials or techniques have provided unprecedented opportunities for the development of high-performance impedance bacteria biosensors. The significant developments of impedimetric biosensors for bacteria detection in the last five years have been reviewed according to the classification of with or without specific bio-recognition element. In addition, some microfluidics systems, which were used in the construction of impedimetric biosensors to improve analytical performance, are introduced in this review.

Description: Readability indices measure how easy or difficult it is to read and comprehend a text. In this paper we look at the relation between readability indices and web documents from two different perspectives. On the one hand we analyse how to reliably measure the readability of web documents by applying content extraction techniques and incorporating a bias correction. On the other hand we investigate how web based corpus statistics can be used to measure readability in a novel and language independent way.

Description: With the emergence of Web 2.0, new applications arise and evolve into more interactive forms of collective intelligence. These applications offer to both professionals and citizens an open and expanded access to geographic information. In this paper, we develop the conceptual foundations of a new technology solution called WikiGIS. WikiGIS’s strength lies in its ability to ensure the traceability of changes in spatial-temporal geographic components (geometric location and shape, graphics: iconography and descriptive) generated by users. The final use case highlights to what extent WikiGIS could be a relevant and useful technological innovation in Geocollaboration.

Description: Indium doped zinc oxide [ZnO:In] thin films have been deposited at 430°C on soda-lime glass substrates by the chemical spray technique, starting from zinc acetate and indium acetate. Pulverization of the solution was done by ultrasonic excitation. The variations in the electrical, structural, optical, and morphological characteristics of ZnO:In thin films, as a function of both the water content in the starting solution and the substrate temperature, were studied. The electrical resistivity of ZnO:In thin films is not significantly affected with the increase in the water content, up to 200 mL/L; further increase in water content causes an increase in the resistivity of the films. All films show a polycrystalline character, fitting well with the hexagonal ZnO wurtzite-type structure. No preferential growth in samples deposited with the lowest water content was observed, whereas an increase in water content gave rise to a (002) growth. The surface morphology of the films shows a consistency with structure results, as non-geometrical shaped round grains were observed in the case of films deposited with the lowest water content, whereas hexagonal slices, with a wide size distribution were observed in the other cases. In addition, films deposited with the highest water content show a narrow size distribution.

Description: Monitoring of progress towards the Millennium Development Goal (MDG) drinking water target relies on classification of water sources as “improved” or “unimproved” as an indicator for water safety. We adjust the current Joint Monitoring Programme (JMP) estimate by accounting for microbial water quality and sanitary risk using the only-nationally representative water quality data currently available, that from the WHO and UNICEF “Rapid Assessment of Drinking Water Quality”. A principal components analysis (PCA) of national environmental and development indicators was used to create models that predicted, for most countries, the proportions of piped and of other-improved water supplies that are faecally contaminated; and of these sources, the proportions that lack basic sanitary protection against contamination. We estimate that 1.8 billion people (28% of the global population) used unsafe water in 2010. The 2010 JMP estimate is that 783 million people (11%) use unimproved sources. Our estimates revise the 1990 baseline from 23% to 37%, and the target from 12% to 18%, resulting in a shortfall of 10% of the global population towards the MDG target in 2010. In contrast, using the indicator “use of an improved source” suggests that the MDG target for drinking-water has already been achieved. We estimate that an additional 1.2 billion (18%) use water from sources or systems with significant sanitary risks. While our estimate is imprecise, the magnitude of the estimate and the health and development implications suggest that greater attention is needed to better understand and manage drinking water safety.

Description: A comprehensive study of the electrical and physical characteristics of Lanthanum Aluminate (LaAlO3) high-dielectric-constant gate oxides for advanced CMOS devices was performed. The most distinctive feature of LaAlO3 as compared with Hf-based high-k materials is the thermal stability at the interface with Si, which suppresses the formation of a low-permittivity Si oxide interfacial layer. Careful selection of the film deposition conditions has enabled successful deposition of an LaAlO3 gate dielectric film with an equivalent oxide thickness (EOT) of 0.31 nm. Direct contact with Si has been revealed to cause significant tensile strain to the Si in the interface region. The high stability of the effective work function with respect to the annealing conditions has been demonstrated through comparison with Hf-based dielectrics. It has also been shown that the effective work function can be tuned over a wide range by controlling the La/(La + Al) atomic ratio. In addition, gate-first n-MOSFETs with ultrathin EOT that use sulfur-implanted Schottky source/drain technology have been fabricated using a low-temperature process.

Description: Landcover is subject to continuous changes on a wide variety of temporal and spatial scales. Those changes produce significant effects in human and natural activities. Maintaining an updated spatial database with the occurred changes allows a better monitoring of the Earth’s resources and management of the environment. Change detection (CD) techniques using images from different sensors, such as satellite imagery, aerial photographs, etc., have proven to be suitable and secure data sources from which updated information can be extracted efficiently, so that changes can also be inventoried and monitored. In this paper, a multisource CD methodology for multiresolution datasets is applied. First, different change indices are processed, then different thresholding algorithms for change/no_change are applied to these indices in order to better estimate the statistical parameters of these categories, finally the indices are integrated into a change detection multisource fusion process, which allows generating a single CD result from several combination of indices. This methodology has been applied to datasets with different spectral and spatial resolution properties. Then, the obtained results are evaluated by means of a quality control analysis, as well as with complementary graphical representations. The suggested methodology has also been proved efficiently for identifying the change detection index with the higher contribution.

Description: In order to study the flashover mechanism of polluted insulators under AC voltage, a new arc propagation criterion which is based on an arc root voltage gradient is proposed. This criterion can explain the variation of the arc root voltage gradient in the arc propagation process. Based on this criterion, a new distributed parameter electrical circuit flashover model of polluted insulators is presented. The arc channel is considered as an equivalent distributed parameter circuit model instead of using the arc voltage-gradient equation. The parameters of the arc model are obtained from the electromagnetic field distribution of the arc and the gas discharge theories. The arc root is considered as parallel paths including the polluted layer. The variation of the voltage on the arc root is related to the capability of arc propagation. This model takes the microscopic mechanism of arc root ionization into consideration, which can improve the accuracy of the flashover model. The results obtained from the presented model are in good agreement with other mathematical and experimental results.

Description: A memristor bridge neural circuit which is able to perform signed synaptic weighting was proposed in our previous study, where the synaptic operation was verified via software simulation of the mathematical model of the HP memristor. This study is an extension of the previous work advancing toward the circuit implementation where the architecture of the memristor bridge synapse is built with memristor emulator circuits. In addition, a simple neural network which performs both synaptic weighting and summation is built by combining memristor emulators-based synapses and differential amplifier circuits. The feasibility of the memristor bridge neural circuit is verified via SPICE simulations.

Description: This work presents an experimental study of gold-DNA-gold structures in the presence and absence of external magnetic fields with strengths less than 1,200.00 mT. The DNA strands, extracted by standard method were used to fabricate a Metal-DNA-Metal (MDM) structure. Its electric behavior when subjected to a magnetic field was studied through its current-voltage (I-V) curve. Acquisition of the I-V curve demonstrated that DNA as a semiconductor exhibits diode behavior in the MDM structure. The current versus magnetic field strength followed a decreasing trend because of a diminished mobility in the presence of a low magnetic field. This made clear that an externally imposed magnetic field would boost resistance of the MDM structure up to 1,000.00 mT and for higher magnetic field strengths we can observe an increase in potential barrier in MDM junction. The magnetic sensitivity indicates the promise of using MDM structures as potential magnetic sensors.

Description: A flow-electrolytical cell containing a strand of micro Au modified carbon fiber electrodes (CFE) has been designedand characterized for use in a voltammatric detector for detecting cysteine using high-performance liquid chromatography. Cysteine is more efficiently electrochemical oxidized on a Au /CFE than a bare gold and carbon fiber electrode. The possible reaction mechanism of the oxidation process is described from the relations to scan rate, peak potentials and currents. For the pulse mode, and measurements with suitable experimental parameters, a linear concentration from 0.5 to 5.0 mg·L−1 was found. The limit of quantification for cysteine was below 60 ng·mL−1.

Description: Aim: To assess suicide mortality in comparison to traffic accidents and homicide deaths in Germany in the year 2010 and to compare years of life lost (YLL) due to these unnatural deaths. Methods: Mortality data were provided by the Federal Statistical Office giving death rates (related to 100,000 inhabitants) and proportions (related to 100 deaths of individuals) for suicide, traffic accidents and homicide as well as YLL data. Results: A total of 14,441 unnatural deaths (suicide, traffic accidents, homicide) were reported in 2010 in Germany. Of those, 10,021 subjects (69.4%) committed suicide, 3,942 (27.3%) died in traffic accidents, 478 (3.3%) were murdered. Suicide death rates were by far the highest, with rates for men (18.6) three times higher than for women (6.1). For both sexes, suicide rates increased with age, whereas suicide as a proportion of all causes of death was higher in younger age groups. In both sexes, suicide was the leading cause of YLL (men: 314 YLL, women: 90 YLL). Conclusions: Suicide is the leading cause of unnatural death and YLL. The sex- and age- specific patterns in suicide mortality call for different action plans to target high risk groups.

Description: The objective of this cross-sectional questionnaire study was to assess associations of a self-report index of sun protection habit strength with sunscreen use in sporting environments and outdoor physical activity. Participants (n = 234) in field hockey, soccer, tennis and surf sports in Queensland, Australia, completed a self-administered survey on sun protection during organized sport, and during general outdoor physical activity during 2005/2006. The sun protection habit strength index was dichotomized into two categories. Multinomial logistic regression analyses assessed the associations of low versus high sun protection habit strength with three categories of sunscreen use (no or rare use; inadequate use; and adequate use). Compared to participants with low sun protection habit strength, those with high sun protection habit strength had significantly greater odds of any sunscreen use during organized sport and during general outdoor physical activity. This association was strongest for adequate sunscreen use in both settings. In conclusion, this study suggests that the measure of sun protection habit strength is a potentially useful assessment tool for future sun protection studies.

Description: In this paper, we integrate a grid system and a wireless network to present a convenient computational service system, called the Semi-Preemptive Computational Service system (SePCS for short), which provides users with a wireless access environment and through which a user can share his/her resources with others. In the SePCS, each node is dynamically given a score based on its CPU level, available memory size, current length of waiting queue, CPU utilization and bandwidth. With the scores, resource nodes are classified into three levels. User requests based on their time constraints are also classified into three types. Resources of higher levels are allocated to more tightly constrained requests so as to increase the total performance of the system. To achieve this, a resource broker with the Semi-Preemptive Algorithm (SPA) is also proposed. When the resource broker cannot find suitable resources for the requests of higher type, it preempts the resource that is now executing a lower type request so that the request of higher type can be executed immediately. The SePCS can be applied to a Vehicular Ad Hoc Network (VANET), users of which can then exploit the convenient mobile network services and the wireless distributed computing. As a result, the performance of the system is higher than that of the tested schemes.

Description: This paper introduces a flexible hardware and software architecture for a smart video sensor. This sensor has been applied in a video surveillance application where some of these video sensors are deployed, constituting the sensory nodes of a distributed surveillance system. In this system, a video sensor node processes images locally in order to extract objects of interest, and classify them. The sensor node reports the processing results to other nodes in the cloud (a user or higher level software) in the form of an XML description. The hardware architecture of each sensor node has been developed using two DSP processors and an FPGA that controls, in a flexible way, the interconnection among processors and the image data flow. The developed node software is based on pluggable components and runs on a provided execution run-time. Some basic and application-specific software components have been developed, in particular: acquisition, segmentation, labeling, tracking, classification and feature extraction. Preliminary results demonstrate that the system can achieve up to 7.5 frames per second in the worst case, and the true positive rates in the classification of objects are better than 80%.

Description: This paper presents a signal processing technique to improve angular rate accuracy of the gyroscope by combining the outputs of an array of MEMS gyroscope. A mathematical model for the accuracy improvement was described and a Kalman filter (KF) was designed to obtain optimal rate estimates. Especially, the rate signal was modeled by a first-order Markov process instead of a random walk to improve overall performance. The accuracy of the combined rate signal and affecting factors were analyzed using a steady-state covariance. A system comprising a six-gyroscope array was developed to test the presented KF. Experimental tests proved that the presented model was effective at improving the gyroscope accuracy. The experimental results indicated that six identical gyroscopes with an ARW noise of 6.2 °/Öh and a bias drift of 54.14 °/h could be combined into a rate signal with an ARW noise of 1.8 °/Öh and a bias drift of 16.3 °/h, while the estimated rate signal by the random walk model has an ARW noise of 2.4 °/Öh and a bias drift of 20.6 °/h. It revealed that both models could improve the angular rate accuracy and have a similar performance in static condition. In dynamic condition, the test results showed that the first-order Markov process model could reduce the dynamic errors 20% more than the random walk model.

Description: Micro-relief heterogeneity can lead to substantial variability in microclimate and hence niche opportunities on a small scale. We explored the relationship between plant species richness and small-scale heterogeneity of micro-relief on the subtropical island of La Palma, Canary Islands. Overall, we sampled 40 plots in laurel and pine forests at four altitudinal bands. Species richness was recorded separately for various growth forms (i.e., mosses, herbaceous and woody plants). Site conditions such as altitude, slope, aspect, and tree density were measured. Micro-relief heterogeneity was characterized by surface structure and a subsequently derived surface heterogeneity index. The effect of micro-relief heterogeneity on species richness was analysed by means of linear mixed effect models and variance partitioning. Effects of micro-relief heterogeneity on species richness varied considerably between growth forms. While moss richness was affected significantly by micro-relief heterogeneity, herbaceous and woody plants richness responded mainly to larger-scale site conditions such as aspect and tree density. Our results stress the importance of small-scale relief heterogeneity for the explanation of spatial patterns of species richness. This poses new challenges as small-scale heterogeneity is largely underrepresented, e.g. with regard to its application in species distribution models.

Description: The aim of this study was to determine the prevalence of suicidal ideation in patients who were tested for HIV-infection and whether along with their HIV status, age and gender influenced their risk for suicidal ideation. The sample consisted of 189 patients who attended a voluntary HIV counseling and testing clinic (VCT) at a general state hospital in Durban, South Africa. Their mean age at baseline was 34.2 years, with an age range of between 16–79 years. Seropositivity, age and gender were significantly associated with suicidal ideation. The majority of these patients were in the younger age group, and young males had a 1.8 times higher risk for suicidal ideation than females. Although risk factors for seropositive-related suicidal ideation can be complex and multi-factorial, this study identified a young age and male gender as important high risk factors in the sample studied. It is recommended that all, but especially young male HIV-infected patients seen at a VCT clinic be screened for suicidal ideation and that early intervention to prevent subsequent suicides or suicidal attempts be included in pre- and post-test HIV counseling.

Description: Because of their small size, passive nature, immunity to electromagnetic interference, and capability to directly measure physical parameters such as temperature and strain, fiber Bragg grating sensors have developed beyond a laboratory curiosity and are becoming a mainstream sensing technology. Recently, high temperature stable gratings based on regeneration techniques and femtosecond infrared laser processing have shown promise for use in extreme environments such as high temperature, pressure or ionizing radiation. Such gratings are ideally suited for energy production applications where there is a requirement for advanced energy system instrumentation and controls that are operable in harsh environments. This paper will present a review of some of the more recent developments.

Description: Methodologies and algorithms are presented for the secure cooperation of a team of autonomous mobile underwater sensors, connected through an acoustic communication network, within surveillance and patrolling applications. In particular, the work proposes a cooperative algorithm in which the mobile underwater sensors (installed on Autonomous Underwater Vehicles—AUVs) respond to simple local rules based on the available information to perform the mission and maintain the communication link with the network (behavioral approach). The algorithm is intrinsically robust: with loss of communication among the vehicles the coverage performance (i.e., the mission goal) is degraded but not lost. The ensuing form of graceful degradation provides also a reactive measure against Denial of Service. The cooperative algorithm relies on the fact that the available information from the other sensors, though not necessarily complete, is trustworthy. To ensure trustworthiness, a security suite has been designed, specifically oriented to the underwater scenario, and in particular with the goal of reducing the communication overhead introduced by security in terms of number and size of messages. The paper gives implementation details on the integration between the security suite and the cooperative algorithm and provides statistics on the performance of the system as collected during the UAN project sea trial held in Trondheim, Norway, in May 2011.

Description: The mean shift algorithm has achieved considerable success in target tracking due to its simplicity and robustness. However, the lack of spatial information may result in its failure to get high tracking precision. This might be even worse when the target is scale variant and the sequences are gray-levels. This paper presents a novel multiple subtemplates based tracking algorithm for the terminal guidance application. By applying a separate tracker to each subtemplate, it can handle more complicated situations such as rotation, scaling, and partial coverage of the target. The innovations include: (1) an optimal subtemplates selection algorithm is designed, which ensures that the selected subtemplates maximally represent the information of the entire template while having the least mutual redundancy; (2) based on the serial tracking results and the spatial constraint prior to those subtemplates, a Gaussian weighted voting method is proposed to locate the target center; (3) the optimal scale factor is determined by maximizing the voting results among the scale searching layers, which avoids the complicated threshold setting problem. Experiments on some videos with static scenes show that the proposed method greatly improves the tracking accuracy compared to the original mean shift algorithm.

Description: Hand-held near-infrared (NIR) optical imagers are developed by various researchers towards non-invasive clinical breast imaging. Unlike these existing imagers that can perform only reflectance imaging, a generation-2 (Gen-2) hand-held optical imager has been recently developed to perform both reflectance and transillumination imaging. The unique forked design of the hand-held probe head(s) allows for reflectance imaging (as in ultrasound) and transillumination or compressed imaging (as in X-ray mammography). Phantom studies were performed to demonstrate two-dimensional (2D) target detection via reflectance and transillumination imaging at various target depths (1–5 cm deep) and using simultaneous multiple point illumination approach. It was observed that 0.45 cc targets were detected up to 5 cm deep during transillumination, but limited to 2.5 cm deep during reflectance imaging. Additionally, implementing appropriate data post-processing techniques along with a polynomial fitting approach, to plot 2D surface contours of the detected signal, yields distinct target detectability and localization. The ability of the gen-2 imager to perform both reflectance and transillumination imaging allows its direct comparison to ultrasound and X-ray mammography results, respectively, in future clinical breast imaging studies.

Description: Studies on fault detection and diagnosis of planetary gearboxes are quite limited compared with those of fixed-axis gearboxes. Different from fixed-axis gearboxes, planetary gearboxes exhibit unique behaviors, which invalidate fault diagnosis methods that work well for fixed-axis gearboxes. It is a fact that for systems as complex as planetary gearboxes, multiple sensors mounted on different locations provide complementary information on the health condition of the systems. On this basis, a fault detection method based on multi-sensor data fusion is introduced in this paper. In this method, two features developed for planetary gearboxes are used to characterize the gear health conditions, and an adaptive neuro-fuzzy inference system (ANFIS) is utilized to fuse all features from different sensors. In order to demonstrate the effectiveness of the proposed method, experiments are carried out on a planetary gearbox test rig, on which multiple accelerometers are mounted for data collection. The comparisons between the proposed method and the methods based on individual sensors show that the former achieves much higher accuracies in detecting planetary gearbox faults.

Description: There have been only few studies to substantiate the kinematic characteristics of cursor movement. In this study, a quantitative experimental research method was used to explore the effect of moving direction on the kinematics of cursor movement in 24 typical young persons using our previously developed computerized measuring program. The results of multiple one way repeated measures ANOVAs and post hoc LSD tests demonstrated that the moving direction had effects on average velocity, movement time, movement unit and peak velocity. Moving leftward showed better efficiency than moving rightward, upward and downward from the kinematic evidences such as velocity, movement unit and time. Moreover, the unique pattern of the power spectral density (PSD) of velocity (strategy for power application) explained why the smoothness was still maintained while moving leftward even under an unstable situation with larger momentum. Moreover, the information from this cursor moving study can guide us to relocate the toolbars and icons in the window interface, especially for individuals with physical disabilities whose performances are easily interrupted while controlling the cursor in specific directions.

Description: We present a study of an electrical model of electromechanically active carbon-polymer composite (CPC) with carbide-derived carbon (CDC) electrodes. The major focus is on investigation of surface electrode behavior upon external bending of the material. We show that electrical impedance measured from the surface of the CDC-based CPC can be used to determine the curvature of the material and, hence, the tip displacement of a CPC laminate in a cantilever configuration. It is also shown that by measuring surface signals in the process of an actuator’s work-cycle, we obtain a self-sensing collision-detecting CPC actuator that can be considered as a counterpart of biomimetic vibrissae.

Description: Carbon nanotubes have many unique physical and chemical properties that are being widely explored for potential applications in biomedicine especially as transporters of drugs, proteins, DNA and RNA into cells. Specifically, single-walled carbon nanotubes (SWCNT) have been shown to deliver siRNA to tumors in vivo. The low toxicity, the excellent membrane penetration ability, the protection afforded against blood breakdown of the siRNA payload and the good biological activity seen in vivo suggests that SWCNT may become universal transfection vehicles for siRNA and other RNAs for therapeutic applications. This paper will introduce a short review of a number of therapeutic applications for carbon nanotubes and provide recent data suggesting SWCNT are an excellent option for the delivery of siRNA clinically.

Description: In Underwater Wireless Sensor Networks (UWSNs), localization is one of most important technologies since it plays a critical role in many applications. Motivated by widespread adoption of localization, in this paper, we present a comprehensive survey of localization algorithms. First, we classify localization algorithms into three categories based on sensor nodes’ mobility: stationary localization algorithms, mobile localization algorithms and hybrid localization algorithms. Moreover, we compare the localization algorithms in detail and analyze future research directions of localization algorithms in UWSNs.

Description: Currently, hydropower accounts for close to 16% of the world’s total power supply and is the world’s most dominant (86%) source of renewable electrical energy. The key resource for hydropower generation is runoff, which is dependent on precipitation. The future global climate is uncertain and thus poses some risk for the hydropower generation sector. The crucial question and challenge then is what will be the impact of climate change on global hydropower generation and what are the resulting regional variations in hydropower generation potential? This paper is a study that aims to evaluate the changes in global hydropower generation resulting from predicted changes in climate. The study uses an ensemble of simulations of regional patterns of changes in runoff, computed from global circulation models (GCM) simulations with 12 different models. Based on these runoff changes, hydropower generation is estimated by relating the runoff changes to hydropower generation potential through geographical information system (GIS), based on 2005 hydropower generation. Hydropower data obtained from EIA (energy generation), national sites, FAO (water resources) and UNEP were used in the analysis. The countries/states were used as computational units to reduce the complexities of the analysis. The results indicate that there are large variations of changes (increases/decreases) in hydropower generation across regions and even within regions. Globally, hydropower generation is predicted to change very little by the year 2050 for the hydropower system in operation today. This change amounts to an increase of less than 1% of the current (2005) generation level although it is necessary to carry out basin level detailed assessment for local impacts which may differ from the country based values. There are many regions where runoff and hydropower generation will increase due to increasing precipitation, but also many regions where there will be a decrease. Based on this evaluation, it has been concluded that even if individual countries and regions may experience significant impacts, climate change will not lead to significant changes in the global hydropower generation, at least for the existing hydropower system.

Description: In this paper we present and discuss selected results of our recent studies of sorbate self-diffusion in microporous materials. The main focus is given to transport properties of carbon molecular sieve (CMS) membranes as well as of the intergrowth of FAU-type and EMT-type zeolites. CMS membranes show promise for applications in separations of mixtures of small gas molecules, while FAU/EMT intergrowth can be used as an active and selective cracking catalyst. For both types of applications diffusion of guest molecules in the micropore networks of these materials is expected to play an important role. Diffusion studies were performed by a pulsed field gradient (PFG) NMR technique that combines advantages of high field (17.6 T) NMR and high magnetic field gradients (up to 30 T/m). This technique has been recently introduced at the University of Florida in collaboration with the National Magnet Lab. In addition to a more conventional proton PFG NMR, also carbon-13 PFG NMR was used.

Description: As part of its climate strategy, the EU aims at increasing the share of electricity from renewable energy sources (RES-E) in overall electricity generation. Attaining this target poses a considerable challenge as the electricity sector is “locked” into a carbon-intensive system, which hampers the adoption of RES-E technologies. Electricity generation, transmission and distribution grids as well as storage and demand response are subject to important path dependences, which put existing, non-renewable energy sources at an advantage. This paper examines how an EU framework for RES-E support policies should be designed to facilitate a carbon lock-out. For this purpose, we specify the major technological, economic and institutional barriers to RES-E. For each of the barriers, a policy review is carried out which assesses the performance of existing policy instruments and identifies needs for reform. The review reveals several shortcomings: while policies targeting generation are widely in place, measures to address barriers associated with electricity grids, storage and demand are still in their infancy and have to be extended. Moreover, the implementation of policies has been fragmented across EU Member States. In this respect, national policies should be embedded into an integrated EU-wide planning of the RES-E system with overarching energy scenarios and partially harmonized policy rules.

Description: California’s development and success have been shaped by its ability to manage floods. This management has varied over the history of California’s economic and political development and continues in various forms today. California will always have flood problems. A range of options are available to aid in flood management problems and have been used over time. These options can be contrasted with flood management elsewhere and the types of options used to manage other types of hazards in California, such as earthquakes, wildfires, and droughts. In the future, flood management in California will require greater reliance on local funding and leadership, reflecting diminished federal and state funding, with more effective state and federal guidance. Effective flood management will also tend to integrate flood management with actions to achieve environmental and other water supply objectives, both to gain revenues from a broader range of beneficiaries as well as to make more efficient use of land and water in a state where both are often scarce.

Description: Quantification of biophysical parameters of urban trees is important for urban planning, and for assessing carbon sequestration and ecosystem services. Airborne lidar has been used extensively in recent years to estimate biophysical parameters of trees in forested ecosystems. However, similar studies are largely lacking for individual trees in urban landscapes. Prediction models to estimate biophysical parameters such as height, crown area, diameter at breast height, and biomass for over two thousand individual trees were developed using best subsets multiple linear regression for a study area in central Oklahoma, USA using point cloud distributional metrics from an Optech ALTM 2050 lidar system. A high level of accuracy was attained for estimating individual tree height (R2 = 0.89), dbh (R2 = 0.82), crown diameter (R2 = 0.90), and biomass (R2 = 0.67) using lidar-based metrics for pooled data of all tree species. More variance was explained in species-specific estimates of biomass (R2 = 0.68 for Juniperus virginiana to 0.84 for Ulmus parviflora) than in estimates from broadleaf deciduous (R2 = 0.63) and coniferous (R2 = 0.45) taxonomic groups—or the data set analysed as a whole (R2 = 0.67). The metric crown area performed particularly well for most of the species-specific biomass equations, which suggests that tree crowns should be delineated accurately, whether manually or using automatic individual tree detection algorithms, to obtain a good estimation of biomass using lidar-based metrics.

Description: This paper describes the characteristics of optical fiber sensors with surface plasmon resonance (SPR) at 1,310 nm in which the scattering loss of silica optical fiber is low. SPR operation in the infrared wavelength range is achieved by coating a thin tantalum pentaoxide (Ta2O5) film. The novelty of this paper lies in the verification of how the hetero-core scheme could be operated as a commercial base candidate in the sense of easy fabrication, sufficient mechanical strength, and significant sensitivity as a liquid detector under the basis of a low loss transmission network in the near infrared wavelength region. The effect of Ta2O5 layer thickness has been experimentally revealed in the wavelength region extending to 1,800 nm by using the hetero-core structured optical fiber. SPR characterizations have been made in the wavelength region 1,000–1,300 nm, showing the feasible operation at the near infrared wavelength and the possible practical applications. In addition, the technique developed in this work has been interestingly applied to a multi-point water-detection and a water-level gauge in which tandem-connected SPR sensors system using hetero-core structured fibers were incorporated. The detailed performance characteristics are also shown on these applications.

Description: Wireless Sensor Networks (WSNs) are gaining tremendous importance thanks to their broad range of commercial applications such as in smart home automation, health-care and industrial automation. In these applications multi-vendor and heterogeneous sensor nodes are deployed. Due to strict administrative control over the specific WSN domains, communication barriers, conflicting goals and the economic interests of different WSN sensor node vendors, it is difficult to introduce a large scale federated WSN. By allowing heterogeneous sensor nodes in WSNs to coexist on a shared physical sensor substrate, virtualization in sensor network may provide flexibility, cost effective solutions, promote diversity, ensure security and increase manageability. This paper surveys the novel approach of using the large scale federated WSN resources in a sensor virtualization environment. Our focus in this paper is to introduce a few design goals, the challenges and opportunities of research in the field of sensor network virtualization as well as to illustrate a current status of research in this field. This paper also presents a wide array of state-of-the art projects related to sensor network virtualization.

Description: Gait analysis using wearable sensors is an inexpensive, convenient, and efficient manner of providing useful information for multiple health-related applications. As a clinical tool applied in the rehabilitation and diagnosis of medical conditions and sport activities, gait analysis using wearable sensors shows great prospects. The current paper reviews available wearable sensors and ambulatory gait analysis methods based on the various wearable sensors. After an introduction of the gait phases, the principles and features of wearable sensors used in gait analysis are provided. The gait analysis methods based on wearable sensors is divided into gait kinematics, gait kinetics, and electromyography. Studies on the current methods are reviewed, and applications in sports, rehabilitation, and clinical diagnosis are summarized separately. With the development of sensor technology and the analysis method, gait analysis using wearable sensors is expected to play an increasingly important role in clinical applications.

Description: During the last years, proteomics has facilitated biomarker discovery by coupling high-throughput techniques with novel nanosensors. In the present review, we focus on the study of label-based and label-free detection systems, as well as nanotechnology approaches, indicating their advantages and applications in biomarker discovery. In addition, several disease biomarkers are shown in order to display the clinical importance of the improvement of sensitivity and selectivity by using nanoproteomics approaches as novel sensors.

Description: The photoplethysmographic waveform sits at the core of the most used, and arguably the most important, clinical monitor, the pulse oximeter.  Interestingly, the pulse oximeter was discovered while examining an artifact during the development of a noninvasive cardiac output monitor.  This article will explore the response of the pulse oximeter waveform to various modes of ventilation.  Modern digital signal processing is allowing for a re-examination of this ubiquitous signal. The effect of ventilation on the photoplethysmographic waveform has long been thought of as a source of artifact. The primary goal of this article is to improve the understanding of the underlying physiology responsible for the observed phenomena, thereby encouraging the utilization of this understanding to develop new methods of patient monitoring. The reader will be presented with a review of respiratory physiology followed by numerous examples of the impact of ventilation on the photoplethysmographic waveform.

Description: Due to the movement and complexity of the carbon market, traditional monoscale forecasting approaches often fail to capture its nonstationary and nonlinear properties and accurately describe its moving tendencies. In this study, a multiscale ensemble forecasting model integrating empirical mode decomposition (EMD), genetic algorithm (GA) and artificial neural network (ANN) is proposed to forecast carbon price. Firstly, the proposed model uses EMD to decompose carbon price data into several intrinsic mode functions (IMFs) and one residue. Then, the IMFs and residue are composed into a high frequency component, a low frequency component and a trend component which have similar frequency characteristics, simple components and strong regularity using the fine-to-coarse reconstruction algorithm. Finally, those three components are predicted using an ANN trained by GA, i.e., a GAANN model, and the final forecasting results can be obtained by the sum of these three forecasting results. For verification and testing, two main carbon future prices with different maturity in the European Climate Exchange (ECX) are used to test the effectiveness of the proposed multiscale ensemble forecasting model. Empirical results obtained demonstrate that the proposed multiscale ensemble forecasting model can outperform the single random walk (RW), ARIMA, ANN and GAANN models without EMD preprocessing and the ensemble ARIMA model with EMD preprocessing.

Description: For decades, underwater acoustic communication has been restricted to the point-to-point long distance applications such as deep sea probes and offshore oil fields. For this reason, previous acoustic modems were typically characterized by high data rates and long working ranges at the expense of large size and high power consumption. Recently, as the need for underwater wireless sensor networks (UWSNs) has increased, the research and development of compact and low-power consuming communication devices has become the focus. From the consideration that the requisites of acoustic modems for UWSNs are low power consumption, omni-directional beam pattern, low cost and so on, in this paper, we design and implement an omni-directional underwater acoustic micro-modem satisfying these requirements. In order to execute fast digital domain signal processing and support flexible interfaces with other peripherals, an ARM Cortex-M3 is embedded in the micro-modem. Also, for the realization of small and omni-directional properties, a spherical transducer having a resonant frequency of 70 kHz and a diameter of 34 mm is utilized for the implementation. Physical layer frame format and symbol structure for efficient packet-based underwater communication systems are also investigated. The developed acoustic micro-modem is verified analytically and experimentally in indoor and outdoor environments in terms of functionality and performance. Since the modem satisfies the requirements for use in UWSNs, it could be deployed in a wide range of applications requiring underwater acoustic communication.

Description: Reporting on contributions to community development is one way gold mining companies communicate the expanse and depth of their commitment to social responsibility. These projects are intended to provide the mine-proximate communities with some of the wealth and other benefits generated by mine development in their locales. We raise questions about reporting and evaluation of community development projects undertaken by AngloGold Ashanti in the two communities of Nyakabale and Nyamalembo, near its Geita mining projects in the Lake Victoria goldfields of Tanzania. We use archival data and data obtained from field research conducted during different periods throughout 2005, 2007 and 2010 to compare what the company reports to have done with what is found on the ground. Our findings revealed that the corporate reporting is misleading, ambiguous, and omissive. Much of the effort labeled “community development” benefited the companies directly via infrastructure development, food supplies to the mine cafeteria, and worker health. We argue that, if Corporate Social Responsibility (CSR) projects are to be the primary way local people directly benefit from mine development, the relationship between the value of those projects and the wealth taken from the location should be considered, community projects should be well defined and differentiated from company-oriented projects, and community representatives should participate in monitoring the success and impact of community development projects.

Description: The transferability of the regional climate model REMO with a standard setup over different regions of the world has been evaluated. The study is based on the idea that the modeling parameters and parameterizations in a regional climate model should be robust to adequately simulate the major climatic characteristic of different regions around the globe. If a model is not able to do that, there might be a chance of an “overtuning” to the “home-region”, which means that the model physics are tuned in a way that it might cover some more fundamental errors, e.g., in the dynamics. All simulations carried out in this study contribute to the joint effort by the international regional downscaling community called COordinated Regional climate Downscaling EXperiment (CORDEX). REMO has been integrated over six CORDEX domains forced with the so-called perfect boundary conditions obtained from the global reanalysis dataset ERA-Interim for the period 1989 to 2008. These six domains include Africa, Europe, North America, South America, West Asia and the Mediterranean region. Each of the six simulations was conducted with the identical model setup which allows investigating the transferability of a single model to regions with substantially different climate characteristics. For the consistent evaluation over the different domains, a new evaluation framework is presented by combining the Köppen-Trewartha climate classification with temperature-precipitation relationship plots and a probability density function (PDF) skill score method. The evaluation of the spatial and temporal characteristics of simulated precipitation and temperature, in comparison to observational datasets, shows that REMO is able to simulate the mean annual climatic features over all the domains quite reasonably, but still some biases remain. The regions over the Amazon and near the coast of major upwelling regions have a significant warm bias. Wet and dry biases appear over the mountainous regions and East Africa, respectively. The temperature over South America and precipitation over the tundra and highland climate of West Asia are misrepresented. The probable causes leading to these biases are discussed and ideas for improvements are suggested. The annual cycle of precipitation and temperature of major catchments in each domain are also well represented by REMO. The model has performed well in simulating the inter- and intra-seasonal characteristics of different climate types in different regions. Moreover, the model has a high ability in representing the general characteristics of different climate types as measured by the probability density function (PDF) skill score method. Although REMO seems to perform best over its home domain in Europe (domain of development and testing), the model has simulated quite well the climate characteristics of other regions with the same set of parameterization options. Therefore, these results lead us to the conclusion that REMO is well suited for long-term climate change simulations to examine projected future changes in all these regions.

Description: For achieving the European renewable electricity targets, a significant contribution is foreseen to come from offshore wind energy. Considering the large scale of the future planned offshore wind farms and the increasing distances to shore, grid integration through a transnational DC network is desirable for several reasons. This article investigates a nine-node DC grid connecting three northern European countries—namely UK, The Netherlands and Germany. The power-flow control inside the multi-terminal DC grid based on voltage-source converters is achieved through a novel method, called distributed voltage control (DVC). In this method, an optimal power flow (OPF) is solved in order to minimize the transmission losses in the network. The main contribution of the paper is the utilization of a genetic algorithm (GA) to solve the OPF problem while maintaining an N-1 security constraint. After describing main DC network component models, several case studies illustrate the dynamic behavior of the proposed control method.

Description: This article focuses on the psychosocial work environment of immigrant cleaners at a Danish workplace. Today, many cleaners working in Danish cleaning jobs are women from the established immigrant communities, but also labour migrants from the newer EU member states have found their way to the cleaning industry. Studies have drawn attention to immigrants’ low position in the cleaning industry and their increased risk of work injuries. This article is based on a case study of an intervention called “Make a Difference” designed to improve the work environment among cleaners at a multi-ethnic workplace. We used semi-structured interviews, photo logs, observation and participation to investigate how the cleaners experienced their work environment. The cleaners reported an overload of heavy work, related to the concept of a classroom’s “readiness for cleaning”, and they expressed strained social relations and communication in addition to a lack of social recognition and invisibility at the workplace, a school. We analysed these psychosocial work environmental problems by investigating the different forms of social relationships and communication within the group of cleaners, and between the cleaners and the teachers and pupils at the school. Moreover, we discussed why the intervention, based on training of language and cleaning skills and social interaction, only partially improved the cleaners’ psychosocial work environment problems. In this article, we argue that social divisions based on ethnicity between the new and the established group of cleaners, combined with their marginal position and poor work organisation at the school, reinforced the cleaners’ experiences of psychosocial work environment problems. This article suggests that increased effort towards social inclusion at work and improved work organisation, especially for the new labour migrants from newer EU-countries, should be considered.

Description: The risk to public health from the large number of dog stools present on streets of urban areas is cause for concern. Dog faeces may be a serious hazard because they may contain microorganisms that are both pathogenic to humans and resistant to several classes of antibiotics. The aim of this study was to evaluate the potential for zoonotic infections and for the presence of antibiotic resistant bacteria in canine faeces which contaminates the urban environment. A total of 418 canine faecal samples were collected from streets in seven areas of Bari, Southern Italy. We have isolated multi-drug resistant Enterococci and meticillin-resistant Staphylococcus aureus from these dog faecal samples. The presence of the resistant bacteria in an urban environment may represent a public health hazard which requires control measures by competent authorities. No Salmonella, Yersinia or Campylobacter species were isolated. Giardia cysts were detected in 1.9% of the samples. The predominant Enterococcus species were E. faecium (61.6%), E. gallinarum (23.3%) and E. casseliflavus (5.5%). Other species, including E. faecalis were also isolated. These strains were resistant to clindamycin (86.3%), tetracycline (65.7%), erythromycin (60.27%) and ampicillin (47.9%). High-level aminoglycoside resistance (HLAR) was found in 65.7% of enterococci. Resistance to three or more antibiotics and six or more antibiotics were observed in 67.12% and 38.4% of Enterococcus spp., respectively. Resistance to vancomycin and teicoplanin was not detected in any of the Enterococcus spp. isolated. Methicillin-resistant Staphylococcus aureus was isolated in 0.7% of the faecal samples. Canine faeces left on the streets may represent a risk factor for transmission of microorganisms and a reservoir of multidrug- resistant bacteria thus contributing to the spread of resistance genes into an urban area.

Description: TiO2-SiO2 binary coatings were deposited by a sol-gel dip-coating method using tetrabutyl titanate and tetraethyl orthosilicate as precursors. The structure and chemical composition of the coatings annealed at different temperatures were analyzed by Raman spectroscopy and Fourier Transform Infrared (FTIR) spectroscopy. The refractive indices of the coatings were calculated from the measured transmittance and reflectance spectra. An increase in refractive index with the high temperature thermal annealing process was observed. The Raman and FTIR results indicate that the refractive index variation is due to changes in the removal of the organic component, phase separation and the crystal structure of the binary coatings.

Description: This study examines an analog circuit comprising a multilayer perceptron neural network (MLPNN). This study proposes a low-power and small-area analog MLP circuit to implement in an E-nose as a classifier, such that the E-nose would be relatively small, power-efficient, and portable. The analog MLP circuit had only four input neurons, four hidden neurons, and one output neuron. The circuit was designed and fabricated using a 0.18 μm standard CMOS process with a 1.8 V supply. The power consumption was 0.553 mW, and the area was approximately 1.36 × 1.36 mm2. The chip measurements showed that this MLPNN successfully identified the fruit odors of bananas, lemons, and lychees with 91.7% accuracy.

Description: We present a novel system for detection, localization and tracking of multiple people, which fuses a multi-view computer vision approach with a radio-based localization system. The proposed fusion combines the best of both worlds, excellent computer-vision-based localization, and strong identity information provided by the radio system, and is therefore able to perform tracking by identification, which makes it impervious to propagated identity switches. We present comprehensive methodology for evaluation of systems that perform person localization in world coordinate system and use it to evaluate the proposed system as well as its components. Experimental results on a challenging indoor dataset, which involves multiple people walking around a realistically cluttered room, confirm that proposed fusion of both systems significantly outperforms its individual components. Compared to the radio-based system, it achieves better localization results, while at the same time it successfully prevents propagation of identity switches that occur in pure computer-vision-based tracking.

Description: Measuring bone turnover markers could detect early stages of osteoporosis and early responses to anti-osteoporotic treatments. Currently, commonly used bone turnover markers, N-telopeptides (NTx) and C-telopeptides (CTx), are measured using ELISA tests, which demands time and increases cost. Bone turnover markers need to be measured more easily for general use. Lateral flow-based immunoassay would be an appropriate method for this context. This study was performed to investigate the precision of a newly developed lateral flow-based immunoassay for measuring the urinary NTx and serum CTx, and their correlations with ELISA measurements. Urine NTx and serum CTx concentrations were determined by photoscan of newly developed strips, using a lateral flow-based immunoassay for 36 subjects (mean age 66.2 years, SD 7.5 years; four males and 32 females). Repeated measurement of urinary NTx and serum CTx were performed three times, using this technology for a precision test. The correlation of the lateral flow-based immunoassay with the ELISA measurements was analyzed. Precision of the newly developed lateral flow based immunoassay was 0.974 (ICC, 95% confidence interval, 0.955 to 0.986) and 0.995 (ICC, 95% confidence interval, 0.991 to 0.997) for urinary NTx and serum CTx, respectively. The correlation of lateral flow based immunoassay with ELISA was 0.913 for urinary NTx and 0.872 for serum CTx. These results suggest that measuring the urinary NTx and serum CTx, using a lateral flow-based immunoassay, is a relevant method for point-of-care testing and screening of bone resorption markers.

Description: To enhance the control performance of permanent magnet synchronous motors (PMSMs), a generalized predictive control (GPC)-based proportional integral feedforward (PIF) controller is proposed for the speed control system. In this new approach, firstly, based on the online identification of controlled model parameters, a simplified GPC law supplies the PIF controller with suitable control parameters according to the uncertainties in the operating conditions. Secondly, the speed reference curve for PMSMs is usually required to be continuous and continuously differentiable according to the general servo system design requirements, so the adaptation of the speed reference is discussed in details in this paper. Hence, the performance of the speed control system using a GPC-based PIF controller is improved for tracking some specified signals. The main motivation of this paper is the extension of GPC law to replace the traditional PI or PIF controllers in industrial applications. The efficacy and usefulness of the proposed controller are verified through experimental results.

Description: Wine quality is related to its intrinsic visual, taste, or aroma characteristics and is reflected in the price paid for that wine. One of the most important wine faults is the excessive concentration of acetic acid which can cause a wine to take on vinegar aromas and reduce its varietal character. Thereby it is very important for the wine industry to have methods, like electronic noses, for real-time monitoring the excessive concentration of acetic acid in wines. However, aroma characterization of alcoholic beverages with sensor array electronic noses is a difficult challenge due to the masking effect of ethanol. In this work, in order to detect the presence of acetic acid in synthetic wine samples (aqueous ethanol solution at 10% v/v) we use a detection unit which consists of a commercial electronic nose and a HSS32 auto sampler, in combination with a neural network classifier (MLP). To find the characteristic vector representative of the sample that we want to classify, first we select the sensors, and the section of the sensors response curves, where the probability of detecting the presence of acetic acid will be higher, and then we apply Principal Component Analysis (PCA) such that each sensor response curve is represented by the coefficients of its first principal components. Results show that the PEN3 electronic nose is able to detect and discriminate wine samples doped with acetic acid in concentrations equal or greater than 2 g/L.

Description: Municipal solid waste (MSW) is an important energy resource for combined heat and power (CHP) production. This study summarized an overview of CHP by MSW to energy (WtE) plants in South Korea and discussed the issues related to energy efficiency improvement. Given the dominant housing culture of apartment living in South Korea, the primary energy output of WtE plants has been for district heating. In 2010, approximately half of the 51 large WtE plants were CHP, while the rest produced heat. Power generation in the WtE CHP plants was estimated to be only 3.65% of the thermal input, while heat production was 60.79%. The R1 efficiency when compared to that in Europe was similar for the CHP plants and higher for heat-only plants. Improving power generation efficiency is required for new power plants producing steam at pressures higher than the current level of 20–30 bar. Over ten of the existing plants needed to increase their energy efficiency by installing new equipment such as steam turbines for excess steam. Finally, transboundary centralization of WtE plants between neighboring local authorities is essential for heat utilization since many existing small-scale plants (〈50 t/day capacity) do not recover heat.

Description: Ecological studies of suicide and self-harm have established the importance of area variables (e.g., deprivation, social fragmentation) in explaining variations in suicide risk. However, there are likely to be unobserved influences on risk, typically spatially clustered, which can be modeled as random effects. Regression impacts may be biased if no account is taken of spatially structured influences on risk. Furthermore a default assumption of linear effects of area variables may also misstate or understate their impact. This paper considers variations in suicide outcomes for small areas across England, and investigates the impact on them of area socio-economic variables, while also investigating potential nonlinearity in their impact and allowing for spatially clustered unobserved factors. The outcomes are self-harm hospitalisations and suicide mortality over 6,781 Middle Level Super Output Areas.

Description: As the number of cancer survivors treated with radiation as a part of their therapy regimen is constantly increasing, so is concern about radiation-induced cancers. This increases the need for therapeutic and mitigating agents against secondary neoplasias. Development and efficacy testing of these agents requires not only extensive in vitro assessment, but also a set of reliable animal models of radiation-induced carcinogenesis. The laboratory mouse (Mus musculus) remains one of the best animal model systems for cancer research due to its molecular and physiological similarities to man, small size, ease of breeding in captivity and a fully sequenced genome. This work reviews relevant M. musculus inbred and F1 hybrid animal models and methodologies of induction of radiation-induced leukemia, thymic lymphoma, breast, and lung cancer in these models. Where available, the associated molecular pathologies are also included.

Description: Indium phosphide nanowires (InP NWs) are accessible at 440 °C from a novel vapor phase deposition approach from crystalline InP sources in hydrazine atmospheres containing 3 mol % H2O. Uniform zinc blende (ZB) InP NWs with diameters around 20 nm and lengths up to several tens of micrometers are preferably deposited on Si substrates. InP particle sizes further increase with the deposition temperature. The straightforward protocol was extended on the one-step formation of new core-shell InP–Ga NWs from mixed InP/Ga source materials. Composite nanocables with diameters below 20 nm and shells of amorphous gallium oxide are obtained at low deposition temperatures around 350 °C. Furthermore, InP/Zn sources afford InP NWs with amorphous Zn/P/O-coatings at slightly higher temperatures (400 °C) from analogous setups. At 450 °C, the smooth outer layer of InP-Zn NWs is transformed into bead-shaped coatings. The novel combinations of the key semiconductor InP with isotropic insulator shell materials open up interesting application perspectives in nanoelectronics.

Description: Land use and land cover (LULC) information is an important component influencing watershed modeling with regards to hydrology and water quality in the river basin. In this study, the sensitivity of the Soil and Water Assessment Tool (SWAT) model to LULC datasets with three points in time and three levels of detail was assessed in a coastal subtropical watershed located in Southeast China. The results showed good agreement between observed and simulated values for both monthly and daily streamflow and monthly NH4+-N and TP loads. Three LULC datasets in 2002, 2007 and 2010 had relatively little influence on simulated monthly and daily streamflow, whereas they exhibited greater effects on simulated monthly NH4+-N and TP loads. When using the two LULC datasets in 2007 and 2010 compared with that in 2002, the relative differences in predicted monthly NH4+-N and TP loads were −11.0 to −7.8% and −4.8 to −9.0%, respectively. There were no significant differences in simulated monthly and daily streamflow when using the three LULC datasets with ten, five and three categories. When using LULC datasets from ten categories compared to five and three categories, the relative differences in predicted monthly NH4+-N and TP loads were −6.6 to −6.5% and −13.3 to −7.3%, respectively. Overall, the sensitivity of the SWAT model to LULC datasets with different points in time and levels of detail was lower in monthly and daily streamflow simulation than in monthly NH4+-N and TP loads prediction. This research provided helpful insights into the influence of LULC datasets on watershed modeling.

Description: Ethylene is the primary component in most plastics, making it economically valuable. It is produced primarily by steam-cracking of hydrocarbons, but can alternatively be produced by the dehydration of ethanol, which can be produced from fermentation processes using renewable substrates such as glucose, starch and others. Due to rising oil prices, researchers now look at alternative reactions to produce green ethylene, but the process is far from being as economically competitive as using fossil fuels. Many studies have investigated catalysts and new reaction engineering technologies to increase ethylene yield and to lower reaction temperature, in an effort to make the reaction applicable in industry and most cost-efficient. This paper presents various lab synthesized catalysts, reaction conditions, and reactor technologies that achieved high ethylene yield at reasonable reaction temperatures, and evaluates their practicality in industrial application in comparison with steam-cracking plants. The most promising were found to be a nanoscale catalyst HZSM-5 with 99.7% ethylene selectivity at 240 °C and 630 h lifespan, using a microreactor technology with mechanical vapor recompression, and algae-produced ethanol to make ethylene.

Description: Perfumes are manufactured by mixing odorous materials with different volatilities. The parameter that measures the lasting property of a material when applied on the skin is called substantivity or tenacity. It is well known by perfumers that citrus and green notes are perceived as fresh and they tend to evaporate quickly, while odors most dissimilar to ‘fresh’ (e.g., oriental, powdery, erogenic and animalic scents) are tenacious. However, studies aimed at quantifying the relationship between fresh odor quality and substantivity have not received much attention. In this work, perceptual olfactory ratings on a fresh scale, estimated in a previous study, were compared with substantivity parameters and antierogenic ratings from the literature. It was found that the correlation between fresh odor character and odorant substantivity is quite strong (r = −0.85). ‘Fresh’ is sometimes interpreted in perfumery as ‘cool’ and the opposite of ‘warm’. This association suggests that odor freshness might be somehow related to temperature. Assuming that odor perception space was shaped throughout evolution in temperate climates, results reported here are consistent with the hypothesis that ‘fresh’ evokes scents typically encountered in the cool season, while ‘warm’ would be evoked by odors found in nature during summer. This hypothesis is rather simplistic but it may provide a new insight to better understand the perceptual space of scents.

Description: This paper analyzes the formation of Tulou villages and the characteristics of Tulou buildings. The genes of the Tulou are examined within the unique physical forms and the significant social culture background. The paper is concerned with how to apply the valuable genes in the preservation and sustainable development of Tulou with a special case analysis.

Description: A new electronic tongue to monitor the presence of glyphosate (a non-selective systemic herbicide) has been developed. It is based on pulse voltammetry and consists in an array of three working electrodes (Pt, Co and Cu) encapsulated on a methacrylate cylinder. The electrochemical response of the sensing array was characteristic of the presence of glyphosate in buffered water (phosphate buffer 0.1 mol·dm−3, pH 6.7). Rotating disc electrode (RDE) studies were carried out with Pt, Co and Cu electrodes in water at room temperature and at pH 6.7 using 0.1 mol·dm−3 of phosphate as a buffer. In the presence of glyphosate, the corrosion current of the Cu and Co electrodes increased significantly, probably due to the formation of Cu2+ or Co2+ complexes. The pulse array waveform for the voltammetric tongue was designed by taking into account some of the redox processes observed in the electrochemical studies. The PCA statistical analysis required four dimensions to explain 95% of variance. Moreover, a two-dimensional representation of the two principal components differentiated the water mixtures containing glyphosate. Furthermore, the PLS statistical analyses allowed the creation of a model to correlate the electrochemical response of the electrodes with glyphosate concentrations, even in the presence of potential interferents such as humic acids and Ca2+. The system offers a PLS prediction model for glyphosate detection with values of 098, −2.3 × 10−5 and 0.94 for the slope, the intercept and the regression coefficient, respectively, which is in agreement with the good fit between the predicted and measured concentrations. The results suggest the feasibility of this system to help develop electronic tongues for glyphosate detection.

Description: Among the non-linear loads used in household, Compact Fluorescent Lamps (CFLs) and LED lamps are becoming more widespread, while incandescent lamps are intended to be replaced by these types of lighting devices. LEDs and CFLs are significantly more efficient and economical than incandescent lamps, and are expected to be used in 100% of residential lighting in the future. As nonlinear loads, LEDs and CFLs produce highly distorted currents. A large number of customers using LEDs or CFLs for domestic, commercial and industrial lighting could determine important Power Quality problems. The paper reports experimental measurement results regarding Power Quality in indoor lighting systems. The harmonic absorptions of several types of luminaries are analyzed, highlighting the impact behavior of different lamps function of used luminaries’ technologies. The recorded harmonic absorption allows characterizing the harmonic spectrum variability of the investigated lamps.

Description:  In this research we have fabricated and tested Au/Dy2O3 composites for applications as Solid Oxide Fuel Cell (SOFC) electrocatalysts. The material was obtained by a process involving electrodeposition of a Au-Dy alloy from a urea/choline chloride ionic liquid electrolyte, followed by selective oxidation of Dy to Dy2O3 in air at high temperature. The electrochemical kinetics of the electrodeposition bath were studied by cyclic voltammetry, whence optimal electrodeposition conditions were identified. The heat-treated material was characterised from the morphological (scanning electron microscopy), compositional (X-ray fluorescence spectroscopy) and structural (X-ray diffractometry) points of view. The electrocatalytic activity towards H2 oxidation and O2 reduction was tested at 650 °C by electrochemical impedance spectrometry. Our composite electrodes exhibit an anodic activity that compares favourably with the only literature result available at the time of this writing for Dy2O3 and an even better cathodic performance.

Description: In this study, sewage sludge and mycelial waste from antibiotic production were pyrolyzed in a batch scale fixed-bed reactor as examples of two kinds of typical industrial biomass wastes with high nitrogen content. A series of experiments were conducted on the rapid pyrolysis and the slow pyrolysis of these wastes in the temperature range from 500–800 °C to investigate the Fuel-N transformation behavior among pyrolysis products. The results showed that Fuel-N conversion to Char-N intimately depended on the pyrolysis temperature and the yield of Char-N reduced with the increase of the pyrolysis temperature. Under the same pyrolysis conditions, Tar-N production mainly depended on complex properties of the different biomasses, including volatile matter, nitrogen content and biomass functional groups. HCN was the predominant NOx precursor in the rapid pyrolysis of biomass, whereas in the slow pyrolysis of mycelial waste, more NH3 was produced than HCN due to the additional NH3 formation through the hydrogenation reaction of Char-N, HCN and H radicals. At the same time, some part of the char was analyzed by Fourier Transform infrared spectroscopy (FTIR) to get more information on the nitrogen functionality changes and the tar was also characterized by Gas Chromatography and Mass Spectrometry (GCMS) to identify typical nitrogenous tar compounds. Finally, the whole nitrogen distribution in products was discussed.

Description: The neutral point of view (NPOV) cornerstone of Wikipedia (WP) is challenged for next generation knowledge bases. A case is presented for content neutrality as a new, every point of view (EPOV) guiding principle. The architectural implications of content neutrality are discussed and translated into novel concepts of Wiki architectures. Guidelines for implementing this architecture are presented. Although NPOV is criticized, the contribution avoids ideological controversy and focuses on the benefits of the novel approach.

Description: The surface structure and adjacent interior of commercially available silicon nanopowder (np-Si) was studied using multinuclear, solid-state NMR spectroscopy. The results are consistent with an overall picture in which the bulk of the np-Si interior consists of highly ordered (“crystalline”) silicon atoms, each bound tetrahedrally to four other silicon atoms. From a combination of 1H, 29Si and 2H magic-angle-spinning (MAS) NMR results and quantum mechanical 29Si chemical shift calculations, silicon atoms on the surface of “as-received” np-Si were found to exist in a variety of chemical structures, with apparent populations in the order (a) (Si–O–)3Si–H > (b) (Si–O–)3SiOH > (c) (HO–)nSi(Si)m(–OSi)4−m−n ≈ (d) (Si–O–)2Si(H)OH > (e) (Si–O–)2Si(–OH)2 > (f) (Si–O–)4Si, where Si stands for a surface silicon atom and Si represents another silicon atom that is attached to Si by either a Si–Si bond or a Si–O–Si linkage. The relative populations of each of these structures can be modified by chemical treatment, including with O2 gas at elevated temperature. A deliberately oxidized sample displays an increased population of (Si–O–)3Si–H, as well as (Si–O–)3SiOH sites. Considerable heterogeneity of some surface structures was observed. A combination of 1H and 2H MAS experiments provide evidence for a substantial population of silanol (Si–OH) moieties, some of which are not readily H-exchangeable, along with the dominant Si–H sites, on the surface of “as-received” np-Si; the silanol moieties are enhanced by deliberate oxidation. An extension of the DEPTH background suppression method is also demonstrated that permits measurement of the T2 relaxation parameter simultaneously with background suppression.

Description: The excessive use of water is damaging European groundwater and rivers: their environmental conditions are often below the “good status” that—according to Water Framework Directive 2000/60—should be reached by 2015. The already critical situation is tending to get worse because of climate change. Even in water rich countries, urban wastewater is still one of the main sources of water pollution. Currently, urban soil sealing and “conventional” rainwater management, which were planned to quickly move rainwater away from roofs and streets, are increasing the flood risk. “Green” technologies and approaches would permit a reduction in water abstraction and wastewater production while improving urban hydrological response to heavy rains. The Life+ WATACLIC project has been implemented to promote such sustainable technologies and approaches in Italy, however the results show huge difficulties: apparently water saving and sustainable urban water management have only low interest amongst the general public and even with public administrations and the relevant industrial sectors. In such a cultural and technical context, the project is bringing a new point of view to public debate. In the long term, the project will certainly have a positive impact, but most likely it will require more time than initially expected.

Description: The fatigue strength, effects of a notch on the fatigue strength, and fatigue crack growth rate of Ti-15Zr-4Nb-4Ta alloy were compared with those of other implantable metals. Zr, Nb, and Ta are important alloying elements for Ti alloys for attaining superior long-term corrosion resistance and biocompatibility. The highly biocompatible Ti-15Zr-4Nb-4Ta alloy exhibited an excellent balance between strength and ductility. Its notched tensile strength was much higher than that of a smooth specimen. The strength of 20% cold-worked commercially pure (C.P.) grade 4 Ti was close to that of Ti alloy. The tension-to-tension fatigue strength of an annealed Ti-15Zr-4Nb-4Ta rod at 107 cycles was approximately 740 MPa. The fatigue strength of this alloy was much improved by aging treatment after solution treatment. The fatigue strengths of C.P. grade 4 Ti and stainless steel were markedly improved by 20% cold working. The fatigue strength of Co-Cr-Mo alloy was markedly increased by hot forging. The notch fatigue strengths of 20% cold-worked C.P. grade 4 Ti, and annealed and aged Ti-15Zr-4Nb-4Ta, and annealed Ti-6Al-4V alloys were less than those of the smooth specimens. The fatigue crack growth rate of Ti-15Zr-4Nb-4Ta was the same as that of Ti-6Al-4V. The fatigue crack growth rate in 0.9% NaCl was the same as that in air. Stainless steel and Co-Cr-Mo-Ni-Fe alloy had a larger stress-intensity factor range (ΔK) than Ti alloy.

Description: In materials research, the development of polymer nanocomposites (PN) is rapidly emerging as a multidisciplinary research field with results that could broaden the applications of polymers to many different industries. PN are polymer matrices (thermoplastics, thermosets or elastomers) that have been reinforced with small quantities of nano-sized particles, preferably characterized by high aspect ratios, such as layered silicates and carbon nanotubes. Thermal analysis (TA) is a useful tool to investigate a wide variety of properties of polymers and it can be also applied to PN in order to gain further insight into their structure. This review illustrates the versatile applications of TA methods in the emerging field of polymer nanomaterial research, presenting some examples of applications of differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), dynamic mechanical thermal analysis (DMTA) and thermal mechanical analysis (TMA) for the characterization of nanocomposite materials.

Description: Arsenic (As) causes health concerns due to its significant toxicity and worldwide presence in drinking water and groundwater. The major sources of As pollution may be natural process such as dissolution of As-containing minerals and anthropogenic activities such as percolation of water from mines, etc. The maximum contaminant level for total As in potable water has been established as 10 µg/L. Among the countries facing As contamination problems, Bangladesh is the most affected. Up to 77 million people in Bangladesh have been exposed to toxic levels of arsenic from drinking water. Therefore, it has become an urgent need to provide As-free drinking water in rural households throughout Bangladesh. This paper provides a comprehensive overview on the recent data on arsenic contamination status, its sources and reasons of mobilization and the exposure pathways in Bangladesh. Very little literature has focused on the removal of As from groundwaters in developing countries and thus this paper aims to review the As removal technologies and be a useful resource for researchers or policy makers to help identify and investigate useful treatment options. While a number of technological developments in arsenic removal have taken place, we must consider variations in sources and quality characteristics of As polluted water and differences in the socio-economic and literacy conditions of people, and then aim at improving effectiveness in arsenic removal, reducing the cost of the system, making the technology user friendly, overcoming maintenance problems and resolving sludge management issues.

Description: Nanomaterials are structures whose exceptionality is based on their large surface, which is closely connected with reactivity and modification possibilities. Due to these properties nanomaterials are used in textile industry (antibacterial textiles with silver nanoparticles), electronics (high-resolution imaging, logical circuits on the molecular level) and medicine. Medicine represents one of the most important fields of application of nanomaterials. They are investigated in connection with targeted therapy (infectious diseases, malignant diseases) or imaging (contrast agents). Nanomaterials including nanoparticles have a great application potential in the targeted transport of pharmaceuticals. However, there are some negative properties of nanoparticles, which must be carefully solved, as hydrophobic properties leading to instability in aqueous environment, and especially their possible toxicity. Data about toxicity of nanomaterials are still scarce. Due to this fact, in this work we focused on studying of the effect of magnetic nanoparticles (NPs) and modified magnetic nanoparticles (MNPs) on tobacco BY-2 plant cell suspension culture. We aimed at examining the effect of NPs and MNPs on growth, proteosynthesis—total protein content, thiols—reduced (GSH) and oxidized (GSSG) glutathione, phytochelatins PC2-5, glutathione S-transferase (GST) activity and antioxidant activity of BY-2 cells. Whereas the effect of NPs and MNPs on growth of cell suspension culture was only moderate, significant changes were detected in all other biochemical parameters. Significant changes in protein content, phytochelatins levels and GST activity were observed in BY-2 cells treated with MNPs nanoparticles treatment. Changes were also clearly evident in the case of application of NPs. Our results demonstrate the ability of MNPs to negatively affect metabolism and induce biosynthesis of protective compounds in a plant cell model represented by BY-2 cell suspension culture. The obtained results are discussed, especially in connection with already published data. Possible mechanisms of NPs’ and MNPs’ toxicity are introduced.

Description: Monitoring tropical deforestation and forest degradation is one of the central elements for the Reduced Emissions from Deforestation and Forest Degradation in developing countries (REDD+) scheme. Current arrangements for monitoring are based on remote sensing and field measurements. Since monitoring is the periodic process of assessing forest stands properties with respect to reference data, adopting the current REDD+ requirements for implementing monitoring at national levels is a challenging task. Recently, the advancement in Information and Communications Technologies (ICT) and mobile devices has enabled local communities to monitor their forest in a basic resource setting such as no or slow internet connection link, limited power supply, etc. Despite the potential, the use of mobile device system for community based monitoring (CBM) is still exceptional and faces implementation challenges. This paper presents an integrated data collection system based on mobile devices that streamlines the community-based forest monitoring data collection, transmission and visualization process. This paper also assesses the accuracy and reliability of CBM data and proposes a way to fit them into national REDD+ Monitoring, Reporting and Verification (MRV) scheme. The system performance is evaluated at Tra Bui commune, Quang Nam province, Central Vietnam, where forest carbon and change activities were tracked. The results show that the local community is able to provide data with accuracy comparable to expert measurements (index of agreement greater than 0.88), but against lower costs. Furthermore, the results confirm that communities are more effective to monitor small scale forest degradation due to subsistence fuel wood collection and selective logging, than high resolution remote sensing SPOT imagery.

Description: The objective of this paper was to provide a preliminary analysis of the utilization of energy derived from waste wood in Taiwan, a highly industrialized country with a high dependence (over 99%) on imported energy. The discussion focuses on the status of waste wood generation and its management over the past decade. Findings show that the quantities of biomass waste collected for reuse purposes in the industrial sectors of Taiwan has exhibited an increasing trend, from about 4000 tons in 2001 to over 52,000 tons in 2010. Although waste wood can be reused as a fuel and raw material for a variety of applications based on regulatory promotion, the most commonly used end use is to directly utilize it as an auxiliary fuel in industrial utilities (e.g., boilers, heaters and furnaces) for the purpose of co-firing with coal/fuel oil. The most progressive measure for promoting biomass-to-power is to introduce the feed-in tariff (FIT) mechanism according to the Renewable Energy Development Act passed in June 2009. The financial support for biomass power generation has been increasing over the years from 0.070 US$/kWh in 2010 to 0.094 US$/kWh in 2012. On the other hand, the environmental regulations in Taiwan regarding the hazard identification of wood-combusted ash (especially in filter fly-ash) and its options for disposal and utilization are further discussed in the paper, suggesting that waste wood impregnated with chromated copper arsenate (CCA) and other copper-based preservatives should be excluded from the wood-to-energy system. Finally, some recommendations for promoting wood-to-energy in the near future of Taiwan are addressed.

Description: In this paper we present a visual analytics approach for deriving spatio-temporal patterns of collective human mobility from a vast mobile network traffic data set. More than 88 million movements between pairs of radio cells—so-called handovers—served as a proxy for more than two months of mobility within four urban test areas in Northern Italy. In contrast to previous work, our approach relies entirely on visualization and mapping techniques, implemented in several software applications. We purposefully avoid statistical or probabilistic modeling and, nonetheless, reveal characteristic and exceptional mobility patterns. The results show, for example, surprising similarities and symmetries amongst the total mobility and people flows between the test areas. Moreover, the exceptional patterns detected can be associated to real-world events such as soccer matches. We conclude that the visual analytics approach presented can shed new light on large-scale collective urban mobility behavior and thus helps to better understand the “pulse” of dynamic urban systems.

Description: Compression creep tests were performed on the ternary 91.84Sn-3.33Ag-4.83Bi (wt.%, abbreviated Sn-Ag-Bi) Pb-free alloy. The test temperatures were: −25 °C, 25 °C, 75 °C, 125 °C, and 160 °C (± 0.5 °C). Four loads were used at the two lowest temperatures and five at the higher temperatures. The specimens were tested in the as-fabricated condition or after having been subjected to one of two air aging conditions: 24 hours at either 125 °C or 150 °C. The strain-time curves exhibited frequent occurrences of negative creep and small-scale fluctuations, particularly at the slower strain rates, that were indicative of dynamic recrystallization (DRX) activity. The source of tertiary creep behavior at faster strain rates was likely to also be DRX rather than a damage accumulation mechanism. Overall, the strain-time curves did not display a consistent trend that could be directly attributed to the aging condition. The sinh law equation satisfactorily represented the minimum strain rate as a function of stress and temperature so as to investigate the deformation rate kinetics: dε/dtmin = Asinhn (ασ) exp (−ΔH/RT). The values of α, n, and  ΔH were in the following ranges (±95% confidence interval): α, 0.010–0.015 (±0.005 1/MPa); n, 2.2–3.1 (±0.5); and ΔH, 54–66 (±8 kJ/mol). The rate kinetics analysis indicated that short-circuit diffusion was a contributing mechanism to dislocation motion during creep. The rate kinetics analysis also determined that a minimum creep rate trend could not be developed between the as-fabricated versus aged conditions. This study showed that the elevated temperature aging treatments introduced multiple changes to the Sn-Ag-Bi microstructure that did not result in a simple loss (“softening”) of its mechanical strength.

Description: This paper presents a simple approach for estimating the spatial and temporal variability of seasonal net irrigation water requirement (IWR) at the catchment scale, based on gridded land use, soil and daily weather data at 500 × 500 m resolution. In this approach, IWR is expressed as a bounded, linear function of the atmospheric water budget, whereby the latter is defined as the difference between seasonal precipitation and reference evapotranspiration. To account for the effects of soil and crop properties on the soil water balance, the coefficients of the linear relation are expressed as a function of the soil water holding capacity and the so-called crop coefficient. The 12 parameters defining the relation were estimated with good coefficients of determination from a systematic analysis of simulations performed at daily time step with a FAO-type point-scale model for five climatically contrasted sites around the River Rhone and for combinations of six crop and ten soil types. The simple scheme was found to reproduce well results obtained with the daily model at six additional verification sites. We applied the simple scheme to the assessment of irrigation requirements in the whole Swiss Rhone catchment. The results suggest seasonal requirements of 32 × 106 m3 per year on average over 1981–2009, half of which at altitudes above 1500 m. They also disclose a positive trend in the intensity of extreme events over the study period, with an estimated total IWR of 55 × 106 m3 in 2009, and indicate a 45% increase in water demand of grasslands during the 2003 European heat wave in the driest area of the studied catchment. In view of its simplicity, the approach can be extended to other applications, including assessments of the impacts of climate and land-use change.

Description: Semantic publishing offers the promise of computable papers, enrichedvisualisation and a realisation of the linked data ideal. In reality, however, the publicationprocess contrives to prevent richer semantics while culminating in a "lumpen" PDF. In thispaper, we discuss a web-first approach to publication, and describe a three-tiered approachthat integrates with the existing authoring tooling. Critically, although it adds limitedsemantics, it does provide value to all the participants in the process: the author, the readerand the machine. 

Description: Pyrolysis(pyr)-GC/MS analysis of characteristic thermal decomposition fragments has been previously used for qualitative fingerprinting of organic sources in environmental samples. A quantitative pyr-GC/MS method based on characteristic tire polymer pyrolysis products was developed for tread particle quantification in environmental matrices including soil, sediment, and air. The feasibility of quantitative pyr-GC/MS analysis of tread was confirmed in a method evaluation study using artificial soil spiked with known amounts of cryogenically generated tread. Tread concentration determined by blinded analyses was highly correlated (r2 ³ 0.88) with the known tread spike concentration. Two critical refinements to the initial pyrolysis protocol were identified including use of an internal standard and quantification by the dimeric markers vinylcyclohexene and dipentene, which have good specificity for rubber polymer with no other appreciable environmental sources. A novel use of deuterated internal standards of similar polymeric structure was developed to correct the variable analyte recovery caused by sample size, matrix effects, and ion source variability. The resultant quantitative pyr-GC/MS protocol is reliable and transferable between laboratories.

Description: Physisorbed polymer-tethered lipid bilayers consisting of phospholipids and lipopolymers represent an attractive planar model membrane platform, in which bilayer fluidity and membrane elastic properties can be regulated through lipopolymer molar concentration. Herein we report a method for the fabrication of such a planar model membrane system with a lateral gradient of lipopolymer density. In addition, a procedure is described, which leads to a sharp boundary between regions of low and high lipopolymer molar concentrations. Resulting gradients and sharp boundaries are visualized on the basis of membrane buckling structures at elevated lipopolymer concentrations using epifluorescence microscopy and atomic force microscopy. Furthermore, results from spot photobleaching experiments are presented, which provide insight into the lipid lateral fluidity in these model membrane architectures. The presented experimental data highlight a planar, solid-supported membrane characterized by fascinating length scale-dependent dynamics and elastic properties with remarkable parallels to those observed in cellular membranes.

Description: A planning support system for land consolidation has been developed that has, at its heart, an expert system called LandSpaCES (Land Spatial Consolidation Expert System) which contains a “design module” that generates alternative land redistributions under different scenarios and an “evaluation module” which integrates GIS with multi-criteria decision making for assessing these alternatives. This paper introduces the structural framework of the latter module which has been applied using a case study in Cyprus. Two new indices are introduced: the “parcel concentration coefficient” for measuring the dispersion of parcels; and the “landowner satisfaction rate” for predicting the acceptance of the land redistribution plan by the landowners in terms of the location of their new parcels. These two indices are used as criteria for the evaluation of the land redistribution alternatives and are transferable to any land consolidation project. Moreover, a modified version of the ratio estimation procedure, referred to as the “qualitative rating method” for assigning weights to the evaluation criteria, is presented, along with a set of non-linear value functions for standardizing the performance scores of the alternatives and incorporating expert knowledge for five evaluation criteria. The application of the module showed that it is a powerful new tool for the evaluation of alternative land redistribution plans that could be implemented in other countries after appropriate adjustments. A broader contribution has also been made to spatial planning processes, which might follow the methodology and innovations presented in this paper.

Description: The construction industry is a high-pollution and high-energy-consumption industry. Energy-saving designs for residential buildings not only reduce the energy consumed during construction, but also reduce long-term energy consumption in completed residential buildings. Because building design affects investment costs, designs are often influenced by investors’ decisions. A set of appropriate decision-support tools for residential buildings are required to examine how building design influences corporations externally and internally. From the perspective of energy savings and environmental protection, we combined three methods to develop a unique model for evaluating the energy-saving design of residential buildings. Among these methods, the Delphi group decision-making method provides a co-design feature, the analytical hierarchy process (AHP) includes multi-criteria decision-making techniques, and fuzzy logic theory can simplify complex internal and external factors into easy-to-understand numbers or ratios that facilitate decisions. The results of this study show that incorporating solar building materials, double-skin facades, and green roof designs can effectively provide high energy-saving building designs.

Description: The ability to restore American chestnut (Castanea dentata) through the planting of blight-resistant (Cryphonectria parasitica) trees is currently being tested. Forest-based research on the species’ silvicultural requirements and chestnut blight development are lacking. Pure American chestnut seedlings were planted in a two-age shelterwood forest with low residual basal area and in a midstory-removal treatment with high residual basal area. Survival did not differ between silvicultural treatments and averaged 67 percent across both treatments by the fifth year. Trees in the two-age shelterwood were 2.36 m and 16.8 mm larger in height and ground-line diameter, respectively, compared to trees in the midstory-removal by the fifth growing season. Blight occurrence was not affected by silvicultural treatment. Exploratory analyses indicated that seedling grading at planting and keeping trees free-to-grow through competition control would have resulted in a two-year gain in height and GLD growth in the two-age shelterwood treatment. The two-age shelterwood represented the most efficacious prescription for chestnut restoration, but the midstory-removal prescription may offer a reasonable alternative in areas where harvesting must be delayed.

Description: Water scarcity, land use conversion and cultural and ecosystem changes threaten the way of life for traditional irrigation communities of the semi-arid southwestern United States. Traditions are strong, yet potential upheaval is great in these communities that rely on acequia irrigation systems. Acequias are ancient ditch systems brought from the Iberian Peninsula to the New World over 400 years ago; they are simultaneously gravity flow water delivery systems and shared water governance institutions. Acequias have survived periods of drought and external shocks from changing economics, demographics, and resource uses. Now, climate change and urbanization threaten water availability, ecosystem functions, and the acequia communities themselves. Do past adaptive practices hold the key to future sustainability, or are new strategies required? To explore this issue we translated disciplinary understanding into a uniform format of causal loop diagrams to conceptualize the subsystems of the entire acequia-based human-natural system. Four subsystems are identified in this study: hydrology, ecosystem, land use/economics, and sociocultural. Important linkages between subsystems were revealed as well as variables indicating community cohesion (e.g., total irrigated land, intensity of upland grazing, mutualism). Ongoing work will test the conceptualizations with field data and modeling exercises to capture tipping points for non-sustainability and thresholds for sustainable water use and community longevity.

Description: The Federal State of Saxony (Germany) transposed the EU Water Framework Directive into state law, identifying 617 surface water bodies (rivers and streams) for implementation of the water framework directive (WFD). Their ecological status was classified by biological quality elements (macrophytes and phytobenthos, benthic invertebrates and fish, and in large rivers, phytoplankton) and specific synthetic and non-synthetic pollutants. Hydromorphological and physico-chemical quality elements were used to identify significant anthropogenic pressures, which surface water bodies are susceptible to, and to assess the effect of these pressures on the status of surface water bodies. In 2009, the data for classification of the ecological status and the main pressures and impacts on water bodies were published in the river basin management plans (RBMP) of the Elbe and Oder rivers. To that date, only 23 (4%) streams achieved an ecological status of “good”, while the rest failed to achieve the environmental objective. The two main reasons for the failure were significant alterations to the stream morphology (81% of all streams) and nutrient enrichment (62%) caused by point (industrial and municipal waste water treatment plants) and non-point (surface run-off from arable fields, discharges from urban drainages and decentralized waste water treatment plants) sources. It was anticipated that a further 55 streams would achieve the environmental objective by 2015, but the remaining 539 need extended deadlines.

Description: The increasing presence of wind power in power systems will likely drive the integration of large wind farms with electrical networks that are series-compensated to sustain large power flows. This may potentially lead to subsynchronous resonance (SSR) issues. In this paper, a supplementary controller on the grid-side converter (GSC) control loop is designed to mitigate SSR for wind power systems based on doubly fed induction generators (DFIGs) with back-to-back converters. Different supplementary controller feedback signals and modulated-voltage injecting points are proposed and compared based on modal analysis and verified through root locus analysis to identify the optimal feedback signal and the most effective control location for SSR damping. The validity and effectiveness of the proposed supplemental control are demonstrated on the IEEE first benchmark model for computer simulations of SSR by means of time domain simulation analysis using Matlab/Simulink.

Description: This paper proposes and develops a residential energy and resource consumption estimation model in the context of multi-family residential housing in Korea using a multi-layer perceptron (MLP) neural network. Eight indicators are introduced which affect the energy and water resource usage characteristics of Korean residential complexes. The proposed model precisely estimated the electricity, gas energy and water consumption for each examined residential complex. In terms of validation, the results showed the highest level of agreement with actually collected datasets. The model shows promising prospects in providing necessary estimations, not only for optimally scaling and sizing energy- and water-related infrastructures, but also to promote reliable energy and resource savings through greenhouse gas (GHG) reduction planning in multi-family housing complexes. The model could also be of use in framing guidelines for the better planning of national or regional energy and resource policies and for forming a foundation of decision-making with definite references regarding the facility management of each apartment complex to enhance the energy and resource use efficiency at these locations.

Description: We investigated correlates for suicidal expression among adolescents in the Seychelles. Data on 1,432 students (52% females) were derived from the Global School-based Health Survey. Participants were divided into three groups: those with no suicidal behavior (N = 1,199); those with suicide ideation/SI (N = 89); and those reporting SI with a plan to carry out a suicide attempt/SISP (N = 139), each within a 12-month recall period. Using multinomial logistic regression, we examined the strength of associations with social, behavioral and economic indicators while adjusting for covariates. Sixteen percent of school-attending adolescents reported a suicidal expression (10% with a plan/6.2% without). Those reporting SI were younger (relative risk ratio RRR = 0.81; CI = 0.68–0.96), indicated signs of depression (RRR = 1.69; CI = 1.05–2.72) and loneliness (RRR=3.36; CI =1.93–5.84). Tobacco use (RRR = 2.34; CI = 1.32–4.12) and not having close friends (RRR = 3.32; CI = 1.54–7.15) were significantly associated with SI. Those with SISP were more likely to be female (RRR = 0.47; 0.30–0.74), anxious (RRR = 3.04; CI = 1.89–4.88) and lonely (RRR = 1.74; CI = 1.07–2.84). Having no close friends (RRR = 2.98; 1.56–5.69) and using tobacco (RRR = 2.41; 1.48–3.91) were also strongly associated. Having parents who were understanding was protective (RRR = 0.50; CI = 0.31–0.82). Our results suggest that school health promotion programs may benefit from targeting multiple factors associated with suicidal expression. More research, particularly multilevel designs are needed to identify peer and family influences which may modify associations with suicidality.

Description: The authenticity of much of the stone-work along Queen’s Lane in central Oxford, UK presented an opportunity to produce a photographic survey from which a weathering index could be established. This represents a site-specific approach to devising a weathering form. Because it is photo-based, weathering forms are visible for comparison and classification purposes across disciplines. Limestone pertaining to building ashlar and plinths along this roadway, which mainly belong to Queen’s College, St Edmund Hall, New College, and Hertford College, was classified according to this newly introduced weathering index, the size-extent (S-E) index, through consideration of type, size, extent, impact, and trigger. This size- (range) and extent-based classification system enables for the assessment of weathering forms of various types, including soiling and decay features as well as those potentially expected in the presence of vegetation and animals. Weathering forms of a range of sizes were present, with a slightly greater abundance of small types (mm-cm in the micro- to mesoscale) and more discrete types with a low extent. For this location in central Oxford, chemical weathering was found to be the predominant type of soiling and decay.

Description: Preventing alcohol-related harm in drinking environments is a growing international priority. Factors relating to the physical, social and staffing environments in bars can contribute to increased alcohol consumption and harm. Understanding the relationships between such factors and intoxication in European drinking environments is critical to developing appropriate interventions. We undertook a quantitative observational study in 60 bars in four European cities, in The Netherlands, Slovenia, Spain and the UK (n = 237 observational visits). Using a structured observational schedule, researchers recorded characteristics of the bar environment and rated customer intoxication levels. All physical bar characteristics showed associations with intoxication before interactions between them were controlled for. Hierarchical modelling found significant independent associations between intoxication and use of plastic glassware, promotion of non-alcoholic drinks (often energy drinks), permissive environments, poor washroom facilities, the presence of a dance floor, customer sexual activity/competitiveness and later observational time. Findings suggest that prevention efforts should focus on raising and enforcing managerial standards in bars. While harm reduction measures such as plastic glassware are often promoted for high risk bars, such measures are inadequate to address public health concerns and insufficient to demonstrate social responsibility.

Description: Foreign body injuries are a well-known threat to children due to the high risk of ingestion of small objects and choking. In order to depict the epidemiological framework of such injuries, data are mostly available for hospitalizations and partially for emergency room visits. The hidden part of the phenomenon consisting of minor self-resolved injuries is still unknown. The purpose of this paper is to provide an estimate of the overall burden of such injuries in children in Italy. Our paper proposes the use of the scale up technique to overcome most of the pitfalls of classical techniques in the estimation of the number of children aged 0–14 that suffered a foreign body injury in 2004. Our results, based on a CATI survey on 1,081 women, show that the estimated number of children under 15 years that incurred in a foreign body injury was 15,829 (95% CI: 14,376–17,282), of these 12,844 were treated in hospital or in emergency department (95% CI: 11,535–14,153). The scale-up method in conjunction with a CATI survey provides a reliable estimate of the size of hard-to-count populations as those of injured children at lower costs with respect to classical sampling schemes.

Description: The adaptation of land-use patterns is an essential aspect of minimizing the inevitable impact of climate change at regional and local scales; for example, adapting watershed land-use patterns to mitigate the impact of climate change on a region’s hydrology. The objective of this study is to simulate and assess a region’s ability to adapt to hydrological changes by modifying land-use patterns in the Wu-Du watershed in northern Taiwan. A hydrological GWLF (Generalized Watershed Loading Functions) model is used to simulate three hydrological components, namely, runoff, groundwater and streamflow, based on various land-use scenarios under six global climate models. The land-use allocations are simulated by the CLUE-s model for the various development scenarios. The simulation results show that runoff and streamflow are strongly related to the precipitation levels predicted by different global climate models for the wet and dry seasons, but groundwater cycles are more related to land-use. The effects of climate change on groundwater and runoff can be mitigated by modifying current land-use patterns; and slowing the rate of urbanization would also reduce the impact of climate change on hydrological components. Thus, land-use adaptation on a local/regional scale provides an alternative way to reduce the impacts of global climate change on local hydrology.