ALBERT

Description: The experiment includes the latest CMIP5 data of CSIRO for January 2015. The data is a newer version of the IPCC DDC AR5 data of CSIRO. '1pctCo2' is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 (https://pcmdi.llnl.gov/mips/cmip5). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. 6.1 1pctCo2 (6.1 1 percent per year CO2) - Version 1: Idealized 1% per year increase in atmospheric CO2 to quadrupling. Experiment design: https://pcmdi.llnl.gov/mips/cmip5/experiment_design.html List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax (https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc.

Description: The experiment includes the latest CMIP5 data of CSIRO for January 2015. The data is a newer version of the IPCC DDC AR5 data of CSIRO. historicalMisc is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 ( https://pcmdi.llnl.gov/mips/cmip5 ). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. Experiment design: https://pcmdi.llnl.gov/mips/cmip5/experiment_design.html List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax ( https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf ) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc . Used forcings in individual ensemble runs (see attached addinfo for more information): r[1-5]i1p1 - Ant: anthropogenic forcing (AA anthropogenic aerosols - a mixture of aerosols, not explicitly defined here; Oz - tropospheric and stratospheric ozone; GHG - well-mixed greenhouse gases, a mixture, not explicitly defined here); r[1-5]i1p2 - NoOz: all forcings except tropospheric and stratospheric ozone concentrations fixed; r[1-5]i1p3 - NoAA: all forcings except anthropogenic aerosols (AA) and the indirect effect of AA on snow albedo; r[1-5]i1p4 - AA: anthropogenic aerosols (AA) including the indirect effect of AA on snow albedo; r[1-5]i1p5 - AntNoAA: the same as NoAA (AA is fixed at preindustrial levels), except that AA emissions are allowed to vary in the Asian region [10S to 45N x 65E to 150E]; r[1-5]i1p6 - VI: volcanic forcing only.

Description: The experiment includes the latest CMIP5 data of CSIRO for January 2015. The data is a newer version of the IPCC DDC AR5 data of CSIRO. 'sstClim' is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 (https://pcmdi.llnl.gov/mips/cmip5). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. 6.2a sstClim (6.2a Control SST Climatology) - Version 1: AMIP-style experiment with control run climatological SSTs and sea ice. Experiment design: https://pcmdi.llnl.gov/mips/cmip5/experiment_design.html List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax (https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc.

Description: The experiment includes the latest CMIP5 data of CSIRO for January 2015. The data is a newer version of the IPCC DDC AR5 data of CSIRO. 'sstClimAerosol' is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 (https://pcmdi.llnl.gov/mips/cmip5). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. 6.4a sstClimAerosol (6.4a all aerosol forcing) - Version 1: AMIP-style experiment with control run climatological SSTs and sea ice (as in expt. 6.2a) but with aerosols consistent with conditions in year 2000 of the historical run (expt. 3.2) Experiment design: https://pcmdi.llnl.gov/mips/cmip5/experiment_design.html List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax (https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc.

Description: The experiment includes the latest CMIP5 data of CSIRO for January 2015. The data is a newer version of the IPCC DDC AR5 data of CSIRO. 'abrupt4xco2' is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 (https://pcmdi.llnl.gov/mips/cmip5). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. 6.3 abrupt4xco2 (6.3 Abrupt 4XCO2) - Version 1: Impose an instantaneous quadrupling of CO2, then hold fixed. Experiment design: https://pcmdi.llnl.gov/mips/cmip5/experiment_design.html List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax (https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc.

Description: The experiment includes the latest CMIP5 data of CSIRO for January 2015. The data is a newer version of the IPCC DDC AR5 data of CSIRO. 'sstClim' is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 (https://pcmdi.llnl.gov/mips/cmip5). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. 6.2a sstClim (6.2a Control SST Climatology) - Version 1: AMIP-style experiment with control run climatological SSTs and sea ice. Experiment design: https://pcmdi.llnl.gov/mips/cmip5/experiment_design.html List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax (https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc.

Description: The experiment includes the latest CMIP5 data of CSIRO for January 2015. The data is a newer version of the IPCC DDC AR5 data of CSIRO. '1pctCo2' is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 (https://pcmdi.llnl.gov/mips/cmip5). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. 6.1 1pctCo2 (6.1 1 percent per year CO2) - Version 1: Idealized 1% per year increase in atmospheric CO2 to quadrupling. Experiment design: https://pcmdi.llnl.gov/mips/cmip5/experiment_design.html List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax (https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc.

Description: The experiment includes the latest CMIP5 data of CSIRO for January 2015. The data is a newer version of the IPCC DDC AR5 data of CSIRO. midHolocene is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 ( https://pcmdi.llnl.gov/mips/cmip5 ). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. midHolocene (3.4 mid-Holocene) - Version 2: Consistent with PMIP (Paleo Model Intercomparison Project) specifications. Impose Mid-Holocene (6 kyrs ago) conditions including Orbital parameters and Atmospheric concentrations of well-mixed greenhouse gasses. Experiment design: https://pcmdi.llnl.gov/mips/cmip5/experiment_design.html List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax ( https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf ) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc .

Description: The experiment includes the latest CMIP5 data of CSIRO for January 2015. The data is a newer version of the IPCC DDC AR5 data of CSIRO. 'amip' is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 (https://pcmdi.llnl.gov/mips/cmip5). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. 3.3 amip (3.3 AMIP) - Version 1: AMIP (1979 - at least 2008). Impose SSTs and sea ice from observations but with other conditions as in experiment 3.2 historical. Experiment design: https://pcmdi.llnl.gov/mips/cmip5/experiment_design.html List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax (https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc.

Description: The experiment includes the latest CMIP5 data of CSIRO for January 2015. The data is a newer version of the IPCC DDC AR5 data of CSIRO. 'historicalNat' is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 (https://pcmdi.llnl.gov/mips/cmip5). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. 7.1 historicalNat (7.1 natural-only historical simulation) - Version 1: Historical simulation but with natural forcing only. Experiment design: https://pcmdi.llnl.gov/mips/cmip5/experiment_design.html List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax (https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc.

Description: The experiment includes the latest CMIP5 data of CSIRO for January 2015. The data is a newer version of the IPCC DDC AR5 data of CSIRO. 'abrupt4xco2' is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 (https://pcmdi.llnl.gov/mips/cmip5). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. 6.3 abrupt4xco2 (6.3 Abrupt 4XCO2) - Version 1: Impose an instantaneous quadrupling of CO2, then hold fixed. Experiment design: https://pcmdi.llnl.gov/mips/cmip5/experiment_design.html List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax (https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc.

Description: The experiment includes the latest CMIP5 data of CSIRO for January 2015. The data is a newer version of the IPCC DDC AR5 data of CSIRO. 'rcp45' is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 (https://pcmdi.llnl.gov/mips/cmip5). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. 4.1 rcp45 (4.1 RCP4.5) - Version 1: Future projection (2006-2100) forced by RCP4.5. RCP4.5 is a representative concentration pathway which approximately results in a radiative forcing of 4.5 W m-2 at year 2100, relative to pre-industrial conditions. RCPs are time-dependent, consistent projections of emissions and concentrations of radiatively active gases and particles. Experiment design: https://pcmdi.llnl.gov/mips/cmip5/experiment_design.html List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax (https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc.

Description: The experiment includes the latest CMIP5 data of CSIRO for January 2015. The data is a newer version of the IPCC DDC AR5 data of CSIRO. historicalExt is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 ( https://pcmdi.llnl.gov/mips/cmip5 ). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. 7.4 historicalExt (7.4 Historical Extension) - Version 1: Extend the CMIP5 historical runs to the near-present (as we have for AMIP), rather than ending them in 2005. Simulations extended to at least the end of 2012 using some estimate of recent and future forcing. Groups are free to use whatever concentrations, solar forcing, SO2 emissions etc. they want to use in extending these runs. It is recommended that if an ensemble of "all-forcings" historical simulations have been run, then *each* member of the ensemble should be carried to the end of 2012. If some other forcing is used or if the run is an RCP run that is truncated after a few years, then the run should be considered a "historical extension" experiment with its output placed in a directory named historicalExt. For these historicalExt experiments, the ensemble member (designated by the "rip" value appearing in the filename and recorded as netCDF global attributes) will be identical to the historical run it extends. List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax ( https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf ) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc .

Description: The experiment includes the latest CMIP5 data of CSIRO for January 2015. The data is a newer version of the IPCC DDC AR5 data of CSIRO. 'amip' is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 (https://pcmdi.llnl.gov/mips/cmip5). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. 3.3 amip (3.3 AMIP) - Version 1: AMIP (1979 - at least 2008). Impose SSTs and sea ice from observations but with other conditions as in experiment 3.2 historical. Experiment design: https://pcmdi.llnl.gov/mips/cmip5/experiment_design.html List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax (https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc.

Description: The experiment includes the latest CMIP5 data of CSIRO for January 2015. The data is a newer version of the IPCC DDC AR5 data of CSIRO. piControl is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 ( https://pcmdi.llnl.gov/mips/cmip5 ). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. 3.1 piControl (3.1 Pre-Industrial Control) - Version 1: Pre-Industrial coupled atmosphere/ocean control run. Imposes non-evolving pre-industrial conditions. Experiment design: https://pcmdi.llnl.gov/mips/cmip5/experiment_design.html List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax ( https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf ) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc .

Description: The experiment includes the latest CMIP5 data of CSIRO for January 2015. The data is a newer version of the IPCC DDC AR5 data of CSIRO. historicalExt is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 ( https://pcmdi.llnl.gov/mips/cmip5 ). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. 7.4 historicalExt (7.4 Historical Extension) - Version 1: Extend the CMIP5 historical runs to the near-present (as we have for AMIP), rather than ending them in 2005. Simulations extended to at least the end of 2012 using some estimate of recent and future forcing. Groups are free to use whatever concentrations, solar forcing, SO2 emissions etc. they want to use in extending these runs. It is recommended that if an ensemble of "all-forcings" historical simulations have been run, then *each* member of the ensemble should be carried to the end of 2012. If some other forcing is used or if the run is an RCP run that is truncated after a few years, then the run should be considered a "historical extension" experiment with its output placed in a directory named historicalExt. For these historicalExt experiments, the ensemble member (designated by the "rip" value appearing in the filename and recorded as netCDF global attributes) will be identical to the historical run it extends. List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax ( https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf ) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc .

Description: The experiment includes the latest CMIP5 data of CSIRO for January 2015. The data is a newer version of the IPCC DDC AR5 data of CSIRO. 'historical' is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 (https://pcmdi.llnl.gov/mips/cmip5). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. 3.2 historical (3.2 Historical) - Version 1: Simulation of recent past (1850 to 2005). Impose changing conditions (consistent with observations). Experiment design: https://pcmdi.llnl.gov/mips/cmip5/experiment_design.html List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax (https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc.

Description: The experiment includes the latest CMIP5 data of CSIRO for January 2015. The data is a newer version of the IPCC DDC AR5 data of CSIRO. 'historical' is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 (https://pcmdi.llnl.gov/mips/cmip5). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. 3.2 historical (3.2 Historical) - Version 1: Simulation of recent past (1850 to 2005). Impose changing conditions (consistent with observations). Experiment design: https://pcmdi.llnl.gov/mips/cmip5/experiment_design.html List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax (https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc.

Description: The experiment includes the latest CMIP5 data of CSIRO for January 2015. The data is a newer version of the IPCC DDC AR5 data of CSIRO. 'sstClim4xco2' is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 (https://pcmdi.llnl.gov/mips/cmip5). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. 6.2b sstClim4xco2 (6.2b SST Climatology With 4XCO2 Forcing) - Version 1: AMIP-style experiment with control run climatological SSTs and sea ice (as in 6.2a) but with quadrupled 4XCO2 imposed. Experiment design: https://pcmdi.llnl.gov/mips/cmip5/experiment_design.html List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax (https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc.

Description: The experiment includes the latest CMIP5 data of CSIRO for January 2015. The data is a newer version of the IPCC DDC AR5 data of CSIRO. piControl is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 ( https://pcmdi.llnl.gov/mips/cmip5 ). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. 3.1 piControl (3.1 Pre-Industrial Control) - Version 1: Pre-Industrial coupled atmosphere/ocean control run. Imposes non-evolving pre-industrial conditions. Experiment design: https://pcmdi.llnl.gov/mips/cmip5/experiment_design.html List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax ( https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf ) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc .

Description: The experiment includes the latest CMIP5 data of CSIRO for January 2015. The data is a newer version of the IPCC DDC AR5 data of CSIRO. '1pctCo2' is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 (https://pcmdi.llnl.gov/mips/cmip5). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. 6.1 1pctCo2 (6.1 1 percent per year CO2) - Version 1: Idealized 1% per year increase in atmospheric CO2 to quadrupling. Experiment design: https://pcmdi.llnl.gov/mips/cmip5/experiment_design.html List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax (https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc.

Description: The experiment includes the latest CMIP5 data of CSIRO for January 2015. The data is a newer version of the IPCC DDC AR5 data of CSIRO. 'sstClim4xco2' is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 (https://pcmdi.llnl.gov/mips/cmip5). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. 6.2b sstClim4xco2 (6.2b SST Climatology With 4XCO2 Forcing) - Version 1: AMIP-style experiment with control run climatological SSTs and sea ice (as in 6.2a) but with quadrupled 4XCO2 imposed. Experiment design: https://pcmdi.llnl.gov/mips/cmip5/experiment_design.html List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax (https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc.

Description: The experiment includes the latest CMIP5 data of CSIRO for January 2015. The data is a newer version of the IPCC DDC AR5 data of CSIRO. "historicalGHG" is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 (https://pcmdi.llnl.gov/mips/cmip5). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. 7.2 historicalGHG (7.2 GHG-only historical) - Version 1: Historical simulation but with greenhouse gas forcing only. Experiment design: https://pcmdi.llnl.gov/mips/cmip5/experiment_design.html List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax (https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc.

Description: The experiment includes the latest CMIP5 data of CSIRO for January 2015. The data is a newer version of the IPCC DDC AR5 data of CSIRO. piControl is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 ( https://pcmdi.llnl.gov/mips/cmip5 ). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. 3.1 piControl (3.1 Pre-Industrial Control) - Version 1: Pre-Industrial coupled atmosphere/ocean control run. Imposes non-evolving pre-industrial conditions. Experiment design: https://pcmdi.llnl.gov/mips/cmip5/experiment_design.html List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax ( https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf ) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc .

Description: The experiment includes the latest CMIP5 data of CSIRO for January 2015. The data is a newer version of the IPCC DDC AR5 data of CSIRO. 'rcp45' is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 (https://pcmdi.llnl.gov/mips/cmip5). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. 4.1 rcp45 (4.1 RCP4.5) - Version 1: Future projection (2006-2100) forced by RCP4.5. RCP4.5 is a representative concentration pathway which approximately results in a radiative forcing of 4.5 W m-2 at year 2100, relative to pre-industrial conditions. RCPs are time-dependent, consistent projections of emissions and concentrations of radiatively active gases and particles. Experiment design: https://pcmdi.llnl.gov/mips/cmip5/experiment_design.html List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax (https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc.

Description: The experiment includes the latest CMIP5 data of CSIRO for January 2015. The data is a newer version of the IPCC DDC AR5 data of CSIRO. rcp85 is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 ( https://pcmdi.llnl.gov/mips/cmip5 ). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. 4.2 rcp85 (4.2 RCP8.5) - Version 1: Future projection (2006-2100) forced by RCP8.5. RCP8.5 is a representative concentration pathway which approximately results in a radiative forcing of 8.5 W m-2 at year 2100, relative to pre-industrial conditions. RCPs are time-dependent, consistent projections of emissions and concentrations of radiatively active gases and particles. Experiment design: https://pcmdi.llnl.gov/mips/cmip5/experiment_design.html List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax ( https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf ) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc .

Description: The experiment includes the latest CMIP5 data of CSIRO for January 2015. The data is a newer version of the IPCC DDC AR5 data of CSIRO. rcp85 is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 ( https://pcmdi.llnl.gov/mips/cmip5 ). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. 4.2 rcp85 (4.2 RCP8.5) - Version 1: Future projection (2006-2100) forced by RCP8.5. RCP8.5 is a representative concentration pathway which approximately results in a radiative forcing of 8.5 W m-2 at year 2100, relative to pre-industrial conditions. RCPs are time-dependent, consistent projections of emissions and concentrations of radiatively active gases and particles. Experiment design: https://pcmdi.llnl.gov/mips/cmip5/experiment_design.html List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax ( https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf ) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc .

Description: The experiment includes the latest CMIP5 data of CSIRO for January 2015. The data is a newer version of the IPCC DDC AR5 data of CSIRO. 'rcp45' is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 (https://pcmdi.llnl.gov/mips/cmip5). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. 4.1 rcp45 (4.1 RCP4.5) - Version 1: Future projection (2006-2100) forced by RCP4.5. RCP4.5 is a representative concentration pathway which approximately results in a radiative forcing of 4.5 W m-2 at year 2100, relative to pre-industrial conditions. RCPs are time-dependent, consistent projections of emissions and concentrations of radiatively active gases and particles. Experiment design: https://pcmdi.llnl.gov/mips/cmip5/experiment_design.html List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax (https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc.

Description: The experiment includes the latest CMIP5 data of CSIRO for January 2015. The data is a newer version of the IPCC DDC AR5 data of CSIRO. 'historical' is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 (https://pcmdi.llnl.gov/mips/cmip5). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. 3.2 historical (3.2 Historical) - Version 1: Simulation of recent past (1850 to 2005). Impose changing conditions (consistent with observations). Experiment design: https://pcmdi.llnl.gov/mips/cmip5/experiment_design.html List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax (https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc.

Description: The experiment includes the latest CMIP5 data of CSIRO for January 2015. The data is a newer version of the IPCC DDC AR5 data of CSIRO. 'historicalNat' is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 (https://pcmdi.llnl.gov/mips/cmip5). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. 7.1 historicalNat (7.1 natural-only historical simulation) - Version 1: Historical simulation but with natural forcing only. Experiment design: https://pcmdi.llnl.gov/mips/cmip5/experiment_design.html List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax (https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc.

Description: The experiment includes the latest CMIP5 data of CSIRO for January 2015. The data is a newer version of the IPCC DDC AR5 data of CSIRO. 'sstClimSulfate' is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 (https://pcmdi.llnl.gov/mips/cmip5). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. 6.4b sstClimSulfate (6.4b sulfate aerosol forcing) - Version 1: AMIP-style experiment with control run climatological SSTs and sea ice (as in expt. 6.2a) but with aerosols consistent with conditions in year 2000 of the historical run (expt. 3.2) Experiment design: https://pcmdi.llnl.gov/mips/cmip5/experiment_design.html List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax (https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc.

Description: The experiment includes the latest CMIP5 data of CSIRO for January 2015. The data is a newer version of the IPCC DDC AR5 data of CSIRO. 'abrupt4xco2' is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 (https://pcmdi.llnl.gov/mips/cmip5). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. 6.3 abrupt4xco2 (6.3 Abrupt 4XCO2) - Version 1: Impose an instantaneous quadrupling of CO2, then hold fixed. Experiment design: https://pcmdi.llnl.gov/mips/cmip5/experiment_design.html List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax (https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc.

Description: The experiment includes the latest CMIP5 data of CSIRO for January 2015. The data is a newer version of the IPCC DDC AR5 data of CSIRO. rcp85 is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 ( https://pcmdi.llnl.gov/mips/cmip5 ). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. 4.2 rcp85 (4.2 RCP8.5) - Version 1: Future projection (2006-2100) forced by RCP8.5. RCP8.5 is a representative concentration pathway which approximately results in a radiative forcing of 8.5 W m-2 at year 2100, relative to pre-industrial conditions. RCPs are time-dependent, consistent projections of emissions and concentrations of radiatively active gases and particles. Experiment design: https://pcmdi.llnl.gov/mips/cmip5/experiment_design.html List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax ( https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf ) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc .

Description: The experiment includes the latest CMIP5 data of CSIRO for January 2015. The data is a newer version of the IPCC DDC AR5 data of CSIRO. 'sstClimAerosol' is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 (https://pcmdi.llnl.gov/mips/cmip5). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. 6.4a sstClimAerosol (6.4a all aerosol forcing) - Version 1: AMIP-style experiment with control run climatological SSTs and sea ice (as in expt. 6.2a) but with aerosols consistent with conditions in year 2000 of the historical run (expt. 3.2) Experiment design: https://pcmdi.llnl.gov/mips/cmip5/experiment_design.html List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax (https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc.

Description: The experiment includes the latest CMIP5 data of CSIRO for January 2015. The data is a newer version of the IPCC DDC AR5 data of CSIRO. 'sstClimSulfate' is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 (https://pcmdi.llnl.gov/mips/cmip5). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. 6.4b sstClimSulfate (6.4b sulfate aerosol forcing) - Version 1: AMIP-style experiment with control run climatological SSTs and sea ice (as in expt. 6.2a) but with aerosols consistent with conditions in year 2000 of the historical run (expt. 3.2) Experiment design: https://pcmdi.llnl.gov/mips/cmip5/experiment_design.html List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax (https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc.

Description: The experiment includes the latest CMIP5 data of CSIRO for January 2015. The data is a newer version of the IPCC DDC AR5 data of CSIRO. 'amip' is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 (https://pcmdi.llnl.gov/mips/cmip5). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. 3.3 amip (3.3 AMIP) - Version 1: AMIP (1979 - at least 2008). Impose SSTs and sea ice from observations but with other conditions as in experiment 3.2 historical. Experiment design: https://pcmdi.llnl.gov/mips/cmip5/experiment_design.html List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax (https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc.

Description: The experiment includes the latest CMIP5 data of CSIRO for January 2015. The data is a newer version of the IPCC DDC AR5 data of CSIRO. "historicalGHG" is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 (https://pcmdi.llnl.gov/mips/cmip5). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. 7.2 historicalGHG (7.2 GHG-only historical) - Version 1: Historical simulation but with greenhouse gas forcing only. Experiment design: https://pcmdi.llnl.gov/mips/cmip5/experiment_design.html List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax (https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc.

Description: The experiment includes the latest CMIP5 data of CSIRO for January 2015. The data is a newer version of the IPCC DDC AR5 data of CSIRO. rcp26 is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 ( https://pcmdi.llnl.gov/mips/cmip5 ). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. 4.3 rcp26 (4.3 RCP2.6) - Version 1: Future projection (2006-2100) forced by RCP2.6. RCP2.6 is a representative concentration pathway which approximately results in a radiative forcing of 2.6 W m-2 at year 2100, relative to pre-industrial conditions. Experiment design: https://pcmdi.llnl.gov/mips/cmip5/experiment_design.html List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax ( https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf ) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc .

Description: The experiment includes the latest CMIP5 data of CSIRO for January 2015. The data is a newer version of the IPCC DDC AR5 data of CSIRO. 'rcp60' is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 (https://pcmdi.llnl.gov/mips/cmip5). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. 4.4 rcp60 (4.4 RCP6) - Version 1: Future projection (2006-2100) forced by RCP6. RCP6 is a representative concentration pathway which approximately results in a radiative forcing of 6 W m-2 at year 2100, relative to pre-industrial conditions. Experiment design: https://pcmdi.llnl.gov/mips/cmip5/experiment_design.html List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax (https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc.

Description: Abstract

Description: High-resolution spherical harmonic representation of the Earth's topographic gravitational potential based on a three-layer decomposition of the topography with variable density values. Main features: - Three-layer decomposition of the topography using information of the new 1'x1' Earth2014 topography model - Rigorous separate modeling of rock, water, and ice masses with layer-specific density values: Rock: 2670 kg m-3, Water: 1030 kg m-3 (Ocean), 1000 kg m-3 (Inland), Ice: 917 kg m-3 - Ellipsoidal arrangement of the topography using the GRS80 ellipsoid + geoid undulations as height reference surface - Additional compilation of a consistent rock-equivalent version REQ_TOPO_2015 using condensed DTM-heights Processing: - Forward modelling in the space domain using tesseroid mass bodies - Transformation of global gridded values to the frequency domain by applying harmonic analysis up to degree and order 2190 Model versions: - Spherical harmonic coefficients of the RWI model are provided by two versions (GM = 3.986004415e+14 m3 s-2, a = 6378136.3 m): RWI_TOPO_2015 (topographic potential) REQ_TOPO_2015 (topogr. potential of rock-equivalent heights) - To allow the evaluation of the RWI model by synthesis software that by default subtracts the coefficients of a normal gravity field, two additional versions are available: RWI_TOPO_2015_plusGRS80 (RWI_TOPO_2015 + GRS80) REQ_TOPO_2015_plusGRS80 (REQ_TOPO_2015 + GRS80) where the following zonal harmonic coefficients of the GRS80 normal gravity field are added to the coefficients of the RWI model: C( 0,0) = 0.100000014676351e+01 C( 2,0) = -0.484167032228604e-03 C( 4,0) = 0.790304535833168e-06 C( 6,0) = -0.168725253450154e-08 C( 8,0) = 0.346053594536695e-11 C(10,0) = -0.265006548323563e-14 C(12,0) = -0.410788602320538e-16 C(14,0) = 0.447176931400485e-18 C(16,0) = -0.346362561442980e-20 Note that these coefficients are already rescaled to the above specified parameters GM and a of the RWI model. Details about the used Earth2014 topography model can be found in Hirt and Rexer (2015, https://doi.org/10.1016/j.jag.2015.03.001).

Description: Abstract

Description: This data collection contains airborne hyperspectral data as well as accompanying in-situ data acquired in autumn 2011 in the Neusling test area near Landau a.d. Isar in Southern Germany. The dataset is composed of a) three airborne hyperspectral image strips acquired during an overflight on September 10th, 2011 with the APEX instrument. The airborne data consists of 288 spectral bands, ranging from VIS to SWIR (413 - 2449 nm). A mosaic of the three image strips covering the Neusling test area is also provided; b) spectral reference and control measurements acquired with a portable ASD FieldSpec 3 JR spectroradiometer in 2150 spectral bands (350 - 2500nm) taken parallel to the overflight; c) a spatially comprehensive land use/land cover map generated from in-situ observations during the days next to the overflight; d) Flight-parallel in-situ point-measurements consisting of: i) non-destructively measured leaf area index of sugar beet, maize, grassland and legumes (105 measurements incl. standard deviations), ii) SPAD chlorophyll measurements (106 measurements incl. standard deviations), iii) 106 measurements of canopy height (incl. standard deviations). The dataset was collected with an agricultural focus.

Description: Other

Description: The Environmental Mapping and Analysis Program (EnMAP) is a German hyperspectral satellite mission that aims at monitoring and characterizing the Earth’s environment on a global scale. EnMAP serves to measure and model key dynamic processes of the Earth’s ecosystems by extracting geochemical, biochemical and biophysical parameters, which provide information on the status and evolution of various terrestrial and aquatic ecosystems. In the frame of the EnMAP preparatory phase, pre-flight campaigns including airborne and in-situ measurements in different environments and for several application fields are being conducted. The main purpose of these campaigns is to support the development of scientific applications for EnMAP. In addition, the acquired data are input in the EnMAP end-to-end simulation tool (EeteS) and are employed to test data pre-processing and calibration-validation methods. The campaign data are made freely available to the scientific community under a Creative Commons Attribution-ShareAlike 4.0 International License. An overview of all available data is provided in in the EnMAP Flight Campaigns Metadata Portal http://www.enmap.org/?q=flights.

Description: Abstract

Description: This data collection contains airborne hyperspectral data as well as accompanying in-situ data acquired in autumn 2009 in the Neusling test area near Landau a.d. Isar in Southern Germany. The dataset is composed of a) two airborne hyperspectral image strips acquired during an overflight on July 27th, 2009 with the HyMap instrument over two areas; “Neusling” and “Steinbeissen”. The airborne data consists of 125 spectral bands, ranging from VIS to SWIR (455 - 2478 nm); b) spectral reference measurements acquired with a portable ASD FieldSpec 3 JR spectroradiometer in 2150 spectral bands (350 - 2500nm) taken parallel to the overflight; c) spatially comprehensive land use/land cover maps for both flight strips generated from in-situ observations during the days next to the overflight; d) Flight-parallel in-situ point-measurements consisting of: i) destructively measured aboveground dry biomass and canopy water content of maize, sugar beet and winter wheat (58 measurements), ii) non-destructive measurements of LAI of sugar beet and maize (52 measurements), iii) TDR soil moisture measurements covering the main land cover types in the area (250 measurements), iv) 249 measurements of canopy height, v) 199 observations of plant phenology. The dataset was intended to be used in an educational context and was collected with an agricultural focus.

Description: Other

Description: The Environmental Mapping and Analysis Program (EnMAP) is a German hyperspectral satellite mission that aims at monitoring and characterizing the Earth’s environment on a global scale. EnMAP serves to measure and model key dynamic processes of the Earth’s ecosystems by extracting geochemical, biochemical and biophysical parameters, which provide information on the status and evolution of various terrestrial and aquatic ecosystems. In the frame of the EnMAP preparatory phase, pre-flight campaigns including airborne and in-situ measurements in different environments and for several application fields are being conducted. The main purpose of these campaigns is to support the development of scientific applications for EnMAP. In addition, the acquired data are input in the EnMAP end-to-end simulation tool (EeteS) and are employed to test data pre-processing and calibration-validation methods. The campaign data are made freely available to the scientific community under a Creative Commons Attribution-ShareAlike 4.0 International License. An overview of all available data is provided in in the EnMAP Flight Campaigns Metadata Portal http://www.enmap.org/?q=flights.

Description: Abstract

Description: This data collection contains a multitemporal series of six airborne hyperspectral image mosaics acquired during the growing season of 2012 over the Neusling test area near Landau a.d. Isar in Southern Germany. The airborne hyperspectral data is complemented by accompanying in-situ data acquired parallel to the overflights. The dataset is composed of a) four airborne hyperspectral image mosaics acquired during overflights on April 28th 2012, May 25th 2012, June 16th 2012 and September 8th 2012 with the AVIS-3 imaging spectrometer. The AVIS data consists of 197 spectral bands, ranging from VIS to SWIR (477 - 1704 nm); b) two airborne hyperspectral image mosaics acquired during overflights, which were conducted by the DLR user service OpAiRS (www.dlr.de/opairs) on May 8th 2012 and August 14th 2012 with a HySpex imaging spectrometer. The HySpex data consists of 332 spectral bands, ranging from VIS to SWIR (417 - 2496 nm); c) spatially comprehensive land use/land cover maps generated from in-situ observations for two time-windows during the growing season of 2012 (May and August); d) Flight-parallel in-situ point-measurements consisting of: i) non-destructively measured leaf area index of winter wheat, winter barley, sugar beet, maize and rapeseed (561 measurements incl. standard deviations), ii) SPAD chlorophyll measurements (522 measurements incl. standard deviations), iii) 557 soil moisture measurements incl. standard deviations iv) 539 phenological observations v) 499 measurements of canopy height incl. standard deviations and vi) 38 measurements of plant density. The dataset was collected in order to cover the seasonal dynamics in the development of agricultural crops in Southern Germany.Erratum: Correct Acquisition date of the second HySpex flight was August 14th 2012, not August 12th 2012.

Description: Other

Description: The Environmental Mapping and Analysis Program (EnMAP) is a German hyperspectral satellite mission that aims at monitoring and characterizing the Earth’s environment on a global scale. EnMAP serves to measure and model key dynamic processes of the Earth’s ecosystems by extracting geochemical, biochemical and biophysical parameters, which provide information on the status and evolution of various terrestrial and aquatic ecosystems. In the frame of the EnMAP preparatory phase, pre-flight campaigns including airborne and in-situ measurements in different environments and for several application fields are being conducted. The main purpose of these campaigns is to support the development of scientific applications for EnMAP. In addition, the acquired data are input in the EnMAP end-to-end simulation tool (EeteS) and are employed to test data pre-processing and calibration-validation methods. The campaign data are made freely available to the scientific community under a Creative Commons Attribution-ShareAlike 4.0 International License. An overview of all available data is provided in in the EnMAP Flight Campaigns Metadata Portal http://www.enmap.org/?q=flights.

Description: Abstract

Description: The dataset is composed of a) hyperspectral imagery acquired during airplane overflights on August 7th, 2008 and August 20th, 2009 consisting of 126 and 125 spectral bands, respectively, ranging from VIS to SWIR (456 - 2490 nm and 453 - 2480 nm) wavelength regions; b) spectral reference measurements acquired with an portable ASD field spectroradiometer in 2150 spectral bands (350 - 2500nm) in the same phenological periods of July/August/September 2008/09 c) plant species assemblages on 81 moist and 72 dry habitats consisting of the fractional cover of all vascular plants, mosses and lichens. The overall goal of the study was to map plant species shift along environmental gradients relating spectral information to the floristic composition. Reference plots of 1 or 2 m² size were thereby located in typical plant communities as well as in transition zones affected by species shift due to management measures such as grazing or shrub removal. In addition 17 field plots were analyzed with regard to soil horizon parameter (e.g. pH, grain size, carbonate content) in the year 2011. Soil types are further available on 51 auger probes.

Description: Other

Description: The Environmental Mapping and Analysis Program (EnMAP) is a German hyperspectral satellite mission that aims at monitoring and characterizing the Earth’s environment on a global scale. EnMAP serves to measure and model key dynamic processes of the Earth’s ecosystems by extracting geochemical, biochemical and biophysical parameters, which provide information on the status and evolution of various terrestrial and aquatic ecosystems. In the frame of the EnMAP preparatory phase, pre-flight campaigns including airborne and in-situ measurements in different environments and for several application fields are being conducted. The main purpose of these campaigns is to support the development of scientific applications for EnMAP. In addition, the acquired data are input in the EnMAP end-to-end simulation tool (EeteS) and are employed to test data pre-processing and calibration-validation methods. The campaign data are made freely available to the scientific community under a Creative Commons Attribution-ShareAlike 4.0 International License. An overview of all available data is provided in in the EnMAP Flight Campaigns Metadata Portal http://www.enmap.org/?q=flights.

Description: Abstract

Description: The dataset contains hyperspectral imagery acquired during airplane overflights on 3rd July 2014 consisting of 242 spectral bands, ranging from VIS to SWIR (423 - 2438 nm) wavelength regions. It covers an area of about 78 km² which is dominated by beech and oak forests. The flight campaign was part of several flight campaigns within the EnMAP project and focused on hyperspectral analysis of plant physiology in deciduous forests in the Donnersberg region in Rhineland-Palatinate, Germany.

Description: Other

Description: The Environmental Mapping and Analysis Program (EnMAP) is a German hyperspectral satellite mission that aims at monitoring and characterizing the Earth’s environment on a global scale. EnMAP serves to measure and model key dynamic processes of the Earth’s ecosystems by extracting geochemical, biochemical and biophysical parameters, which provide information on the status and evolution of various terrestrial and aquatic ecosystems. In the frame of the EnMAP preparatory phase, pre-flight campaigns including airborne and in-situ measurements in different environments and for several application fields are being conducted. The main purpose of these campaigns is to support the development of scientific applications for EnMAP. In addition, the acquired data are input in the EnMAP end-to-end simulation tool (EeteS) and are employed to test data pre-processing and calibration-validation methods. The campaign data are made freely available to the scientific community under a Creative Commons Attribution-ShareAlike 4.0 International License. An overview of all available data is provided in in the EnMAP Flight Campaigns Metadata Portal http://www.enmap.org/?q=flights

Description: This is a hydrodynamic hindcast for the Baltic Sea over the period 1958-2011. The simulation has been performed with the hydrodynamic model TRIM-NP V2.1 in barotropic 2D mode. Water level and current component fields are stored hourly. The model is set up on an equidistant Cartesian grid cascade with the center near Helgoland (7.88 E, 54.18 N) for the coarsest grid (12.8km resolution) (http://dx.doi.org/doi:10.1594/WDCC/coastDat-2_TRIM-NP-2d). Further model results from three nested grids (6.4km,3.2km, 1.6km resolution) for the Baltic Sea are hourly available for the period 1958-2011.

Description: Hindcast simulation has been performed for reconstruction of meso-scale weather systems, especially of intense storms by using the global atmospheric model ECHAM6 in its version 6.1.00 (CMIP5), the spectral nudging technique and NCEP reanalysis as forcing data. Horizonatal resolution: (768x384) gridpoints (T255L95), vertical resolution: 95 levels. Time period: 1948 - 2015 april. The output from the model run: /work/gg0301/g260070/ECHAM6/echam-6.1.00/experiments/echam6_t255l95_sn_ncep1/scripts on the HLRE-2 Blizzard and the Original-Outputs of the 8 ECHAM6-streams were named and differed by their suffixes: echam6_t255l95_sn_ncep1_199212.01_co2 echam6_t255l95_sn_ncep1_199212.01_echam echam6_t255l95_sn_ncep1_199212.01_jsbach echam6_t255l95_sn_ncep1_199212.01_land echam6_t255l95_sn_ncep1_199212.01_nudg echam6_t255l95_sn_ncep1_199212.01_surf echam6_t255l95_sn_ncep1_199212.01_veg echam6_t255l95_sn_ncep1_199212.01_vphysc

Description: Reflectances measured in the visible frequency range at three channels of the Moderate Resolution Imaging Spectroradiometer (MODIS) aboard the Earth Observation Satellite (EOS) TERRA were used to derive the melt pond fraction on Arctic sea ice using an artificial neural network. This analysis was done on reflectances gridded onto a polar-stereographic grid tangent to the Earths' surface at 70 deg N with 500 m grid resolution. The reflectances used originate from the 8-day composite reflectances provided via https://wist.echo.nasa.gov/api/ as product: "MODIS surface Reflectance 8-Day L3 Global 500m SIN Grid V005". After gridding and flagging for clouds and other disturbances the artificial neural network was applied, providing fractions of three surface classes: 1) melt ponds, 2) sea ice and snow, and 3) open water at 500 m grid resolution. This data has been interpolated onto a similar polar-stereographic grid but with 12.5 km grid resolution. The data set offered here comprises several data layers: the melt pond fraction, its standard deviation, the open water fraction, and the number of individual valid grid cells with 500 m grid resolution included in each 12.5 km grid cell. In addition, in three separate data layers melt pond fraction, its standard deviation, and the open water fraction are given with those grid cells (with 12.5 km grid resolution) flagged as invalid where less than 90 % of the native 500 m grid resolution data indicate clear sky conditions. Valid for all these layers is, that grid cells with an open water fraction larger than 85 % have been flagged as invalid as well. The data set offered here is version 02 of the melt pond data set. The main difference to version 01 is a bias correction carried out to remove a positive bias in the melt pond fraction and in the open water fraction.

Description: Simulated 2D residual velocity fields in the inner German Bight were subjected to Principal Component Analysis (PCA). Residual currents were obtained from coastDat2 barotropic 2D simulations with the hydrodynamic model TRIM-NP V2.1.22 in barotropic 2D mode on a Cartesian grid (1.6km spatial resolution) stored on an hourly basis for the years 1948 - 2012 (doi:10.1594/WDCC/coastDat-2_TRIM-NP-2d) and later extended until August 2015. The present analysis refers to the period Jan 1958 - Aug 2015. The spatial domain considered is the region to the east of 6 degrees east and to the south of 55.6 degrees north. All grid nodes with a bathymetry of less than 10m were excluded. Residual velocities were calculated in two different ways: 1.) as 25h means, 2.) as monthly means. Both types of residual current data are available from * RESIDUAL_CURRENTS_195801_201508 The directory contains sub-directories for years and months. Daily residual currents for the 13th of September 1974, for instance, are stored in * RESIDUAL_CURRENTS_195801_201508/YEAR_1974/MONTH_09/TRIM2D_1974_09_13_means.nc while monthly mean residual currents for September 1974 are stored in: * RESIDUAL_CURRENTS_195801_201508/YEAR_1974/TRIM2D_1974_09_means.nc All current fields provided were interpolated from the original Cartesian model grid to a more convenient regular geographical grid (116x76 nodes). Mean residual currents are stored in: * mean_residual_currents.nc This data set contains residual velocities both on original Cartesian grid nodes and interpolated to the geographical grid. An example plot is provided: * mean_residual_currents.png For PCA, two residual velocity components from each of 12133 Cartesian grid nodes were combined into one data vector (length 2x12133), referring to 21061 daily or 692 monthly time levels. Results of two independent PCAs for either daily or monthly mean fields are stored in: * PCA_daily_residual_currents.nc * PCA_monthly_residual_currents.nc Files contain three leading Principal Components (PCs) and corresponding Emipirical Orthogonal Functions (EOFs). Again EOFs were also interpolated to a regular geographical grid. PC time series are also stored in plain ASCII format: * PCs_daily.txt * PCs_monthly.txt For monthly fields the number N of variables (N=2x12133) is much larger than the number T of time levels (T=692). Therefore, to reduce computational demands, the roles of time and space were formally interchanged. Having conducted the PCA the EOFs were then transformed back to the original spatial coordinates (cf. Section 12.2.6 in von Storch and Zwiers (1999), Statistical Analysis in Climate Research, Cambridge University Press). A much larger number of time levels made even this approach prohibitive for the full set of daily data. Therefore, PCAs were performed for six sub-periods (1958-1965, 1966-1975, 1976-1985, 1986-1995, 1996-2005, 2006-2015(Aug)) independently. EOFs obtained from these six sub-periods were then averaged to obtain EOFs representative for the whole period. Corresponding PCs were calculated by projecting daily fields onto these average EOFs. IMPORTANT: In contrast with PCA of monthly data, the PCA of daily data INVOLVES SOME APPROXIMATIONS! EOFs on the original nodes were normalized to have unit lengths. The following figures, * daily_EOF1.png * daily_EOF2.png * daily_EOF3.png show the first three EOFs obtained from daily data, assuming that corresponding PCs have the value of one standard deviation. The following two plots, * monthly_EOF1.png * monthly_EOF2.png show the leading EOFs for monthly mean data. EOF3 is omitted as it represents just a very small percentage of overall variance (1.7%).

Description: The data include daily, monthly, and seasonal variables of CORDEX experiments scaled down onto a ca. 50 km grid over Africa (acronym: AFR-44) based on the CCLM4-8-17 regional climate model. Each file contains a single variable and is formatted according to the CORDEX data protocol - meaning NetCDF-4 compressed, CF-1.4 compliant, with attributes and filenames according to the specified DRS. Data from any CORDEX experiment and with any CMIP5 global model forcing available and transfered from the ESGF to the long term archive WDCC at the time of publication are included. These are the experiments evaluation, historical, rcp85, and rcp45 using forcing data derived from the CMIP5 models MPI-ESM-LR, EC-EARTH, CNRM-CM5 and HadGEM2-ES. The data are provided on the model computational (native) grid.

Description: Abstract

Description: In August and September 2013, 17 shallow ocean bottom seismograph (S-OBS) stations and 8 land stations had been deployed on and around Muostakh Island (Laptev Sea, Russia) for a time period of 24 days. The specifically designed underwater recording equipment consists of a low-power digital recorder, a standard 4.5Hz 3-component geophone, and a battery pack. These components are enclosed in a watertight cylindrical container safe for operation down to 100m water depth. Land stations were also equipped with 4.5 Hz 1C-geophones as well as with batteries. All instruments recorded continuously with 200 samples per second (sps). The stations were deployed along two profiles covering a region of 8km x 8 km. The tilt of the geophone inside the S-OBS influences the sensor characteristics. Since the orientation and tilt at the ocean bottom was unknown, approximately every 24 hours a calibration signal (a sequence of step-functions) was applied to the sensors of the ocean stations. This might be used to recover the actual sensor characteristics (eigenfrequency and damping). The dataset contains 1) a info-folder with a) a README file; b) a file containing the times when calibration signals occurred (format: recorder_ID - date - time); c) the station table (ASCII; recorder_ID - latitude - longitude - (water)depth); d) a map of the region with the locations of the stations; 2) raw CUBE-formatted data; 3) converted mini-seed-formatted data (hourly files).

Description: Abstract

Description: Raw-, SEG-Y and other supplementary data of the amphibious wide-angle seismic experiment carried out in south Turkey, Cyprus and south of Cyprus are presented. The aim of this project was to reveal the crustal structure of the Anatolian plateau, Cyprus and the Eratosthenes Seamount (ESM), south of Cyprus. Simultaneous data acquisition offshore with ocean bottom seismometers and airguns and onshore with seismic land stations and two land shots in south Turkey lead to a 650 km long amphibian seismic profile.

Description: Abstract

Description: SEGY and supplementary data of the seismic reflection experiment in the Baza Basin (Southern Spain). Presented are unstacked and unmigrated data of three 2D vibroseis profiles which were carried out in October 2013 and all corresponding raw data. The dataset is archived at the GIPP Experiment and Data Archive. The Baza Basin is an intra-mountain evaporitic basin in the Betic Cordillera (Southern Spain). The basin is formed by Pliocene to Pleistocene sediments. It can be distinguished into three lithological zones corresponding to different paleo-environments (Gibert et al., 2007). The inner zone, interpreted as a central saline lake, is dominated by an alternation of gypsum and carbonate laminae. The intermediate zone is characterized by cyclic carbonate beds. This zone is interpreted as a mosaic of shallow lakes surrounding the inner zone. The marginal zone consists of lacustrine deposits which are surrounded by an alluvial belt. In the marginal zone, distal fan deposits and shallow lake sediments alternate as a result of fluctuations in the lake water level which are related to changes in climate (Gibert et al., 2007). Therefore, up to 2.5 km thick lacustrine and ancillary continental deposits are found in this part of the basin which provide an unique archive of climatic changes and paleo-climatic events. The basin is bounded to the West by the Baza fault zone (e.g., Alfaro et al., 2010). There are plans to analyze the sedimentary record of the central zone with regard to the paleo-climaste in the Mediterranean as well as on a global scale within a scientific drilling project. In preparation for future drilling activities, the project BASE (BAza Seismic Experiment) started in the middle of the year 2013 with a duration of 12 month. In the framework of this project, controlled-source seismic measurements were used to investigate the structure of the Baza Basin and to find local zones of neo-tectonic deformation bounding the basin to the west (Baza fault). The aim of the seismic work was to provide structural information for the planned scientific drilling project. The vibroseismic experiments were carried out in the vicinity of Baza during 21st and 29th October 2013. A net of three individual seismic profiles was conducted, each 18 km in length (Figure 1). Two simultaneously operating vibrators were used as source at 301 positions at each profile. The nominal source point spacing was 60 m. The receivers were spread along the active profile in a roll-along configuration with a nominal receiver spacing of 20 m. Depending on the proceeding of the vibrators, groups of receivers were picked up at the end of the spread and were moved to the front. With a total amount of ~340 receivers, an offset range of at least 3 km around the source point was covered during the entire registration of each profile. Additionally to the roll-along receivers at Line 2, 31 fixed recorders were spread with a spacing of 600 m over the full distance of this profile (far-field recordings).

Description: Abstract

Description: The KISS network was installed in the frame of the "Klyuchevskoy Investigation - Seismic Structure of an extraordinary volcanic system" project and recorded data between summer 2015 and summer 2016 in one of the world's largest clusters of subduction volcanoes - the Klyuchevskoy volcanic group (KVG). It is located in eastern Russia at the northern end of the Kuril-Kamchatka subduction zone close to its intersection with the Aleutian arc and the north-western termination of Hawaii-Emperor seamount chain. Additional to the 4700m high Mount Klyuchevskoy the KVG contains 12 other volcanoes that have together erupted about 1 cubic meter rock per second averaged over the past 10,000 years. Among those Klyuchevskoy, Bezymianny and Tolbachik were the most active ones during the last decades with eruptions styles ranging from explosive to Hawaiian-type. The KISS experiment is designed to investigate the volcanic and seismic processes and its structural setting in the KVG. The network covers a circular region of about 80km diameter with some linear extensions. It includes data from 77 temporary seismic stations with broadband and short period sensors that were installed on concrete plates in about 60cm deep holes. Due to the local conditions the stations were battery powered and could not be serviced during the experiment. GPS reception of the digitizers was not continuous at all stations due to thick snow cover and vegetation.

Description: Abstract

Description: This data is documented by the Scientific Technical Report Data 15/02 (http://dx.doi.org/10.2312/GFZ.b103-15021). Both, the data and the report, are supplements to the publication Blöcher et al. (2015), accessible via http://dx.doi.org/10.1016/j.geothermics.2015.07.008. From 2011-06-01 until 2013-12-31, the measurement and control system at the Groß Schönebeck research platform acquired data from several circulation experiments. Different data values were recorded at a sampling interval of 1 s. Relevant data for understanding and analyzing the hydraulic situation of the system were resampled to a 1 minute interval. From the resampled dataset, additional parameters were derived. Furthermore, if parameters were considered to be essential, but the measurement of these parameters was erroneous, some data were reprocessed. All relevant data and processing steps performed on the data are described within this report. Data described within this report can be accessed via http://dx.doi.org/10.5880/GFZ.b103-15021.1. The presented data was acquired during different research projects by the staff of the International Centre for Geothermal Research as well as Section 4.1 Reservoirtechnologies at the Helmholtz Centre Potsdam GFZ German Research Centre for Geosciences.

Description: Abstract

Description: The dataset is composed of a) hyperspectral imagery acquired with AISA Eagle and Hawk imaging spectrometer data in the range 400 to 2500 nm on April 2 and August 9, 2011, with a ground sampling distance of 4 m in 12 and 15 flight lines, respectively; b) airborne LiDAR data acquired in single-pulse mode in August 2011 concurrent with hyperspectral data acquisition with an avarage point density of 0.7 hits per meter squared; c) spectral reference measurements acquired with a portable ASD field spectroradiometer around the days of image acquisitions d) fractional cover of green vegetation, dry vegetation, bare soil and rock were visually estimated for 60 (April) and 53 (August) transects of 20-m length. The overall goal of the study was to investigate the potential of hyperspectral and LiDAR data for assessing sediment connectivity at the hillslope to subcatchment scale. For that the fractional cover of green vegetation, dry vegetation, bare soil and rock was derived by applying a multiple endmember spectral mixture analysis approach to the hyperspectral image data. The LiDAR point clouds were pre-processed to generate a digital elevation map as well as a vegetation height map, both with 4-m spatial resolution.

Description: Other

Description: The Environmental Mapping and Analysis Program (EnMAP) is a German hyperspectral satellite mission that aims at monitoring and characterizing the Earth’s environment on a global scale. EnMAP serves to measure and model key dynamic processes of the Earth’s ecosystems by extracting geochemical, biochemical and biophysical parameters, which provide information on the status and evolution of various terrestrial and aquatic ecosystems. In the frame of the EnMAP preparatory phase, pre-flight campaigns including airborne and in-situ measurements in different environments and for several application fields are being conducted. The main purpose of these campaigns is to support the development of scientific applications for EnMAP. In addition, the acquired data are input in the EnMAP end-to-end simulation tool (EeteS) and are employed to test data pre-processing and calibration-validation methods. The campaign data are made freely available to the scientific community under a Creative Commons Attribution-ShareAlike 4.0 International License. An overview of all available data is provided in in the EnMAP Flight Campaigns Metadata Portal http://www.enmap.org/?q=flights.

Description: Abstract

Description: Version History11 Sep 2019: Release of Version 1.1 with the following changes: (1) new licence: CC BY SA 4.0, modification of the title: removal of file name and version); (2) addition of ORIDs when available; (3) actualisation of affiliations for some authors The metadata of the first version 1.0 is available in the download folder.. Data and file names remain unchanged.Area Source model for Central AsiaThe area sources for Central Asia within the EMCA model are defined by mainly considering the pattern of crustal seismicity down to 50 km depth. Although tectonic and geological information, such as the position and strike distribution of known faults, have also been taken into account when available. Large area sources (see, for example source_id 1, 2, 5, 45 and 52, source ids are identified by parameter “source_id” in the related shapefile) are defined where the seismicity is scarce and there are no tectonic or geological features that would justify a further subdivision. Smaller area sources (e.g., source_id values 36 and 53) have been designed where the seismicity can be assigned to known fault zones.In order to obtain a robust estimation of the necessary parameters for PSHA derived by the statistical analysis of the seismicity, due to the scarcity of data in some of the areas covered by the model, super zones are introduced. These super zones are defined by combining area sources based on similarities in their tectonic regime, and taking into account local expert’s judgments. The super zones are used to estimate: (1) the completeness time of the earthquake catalogue, (2) the depth distribution of seismicity, (3) the tectonic regime through focal mechanisms analysis, (4) the maximum magnitude and (5) the b values via the GR relationship.The earthquake catalogue for focal mechanism is extracted from the Harvard Global Centroid Moment Tensor Catalog (Ekström and Nettles, 2013). For the focal mechanism classification, the Boore et al. (1997) convention is used. This means that an event is considered to be strike-slip if the absolute value of the rake angle is 〈=30 or 〉=150 degrees, normal if the rake angle is 〈-30 or 〉-150 and reverse (thrust) if the rake angle is 〉30 or 〈150 degrees. The distribution of source mechanisms and their weights are estimated for the super zones.For area sources, the maximum magnitude is usually taken from the historical seismicity, but due to some uncertainties in the magnitudes of the largest events, the opinions of the local experts are also included in assigning the maximum magnitude to each super zone. Super zones 2 and 3, which belongs to stable regions, are each assigned a maximum magnitude of 6, after Mooney et al. (2012), which concludes after analyses and observation of modern datasets that at least an event of magnitude 6 can occur anywhere in the world. For hazard calculations, each area source is assigned the maximum magnitude of their respective super zone.For processing the GR parameters (a and b values) for the area sources, the completeness analysis results estimated for the super zones are assigned to the respective smaller area sources. If the individual area source has at least 20 events, the GR parameters are then estimated for the area source. Otherwise, the b value is adopted from the respective super zone to which the smaller area source belongs, and the a value is estimated based on the Weichert (1980) method. This ensures the stability in the b value as well as the variation of activity rate for different sources.The hypocentral depth distribution is estimated from the seismicity inside each super zone. The depth distribution is considered for maximum up to three values. Based on the number of events, the weights are assigned to each distribution. These depth distributions, along with corresponding weights, are further assigned to the area sources within the same super zones.

Description: Other

Description: Distribution file: "EMCA_seismozonesv1.0_shp.zip"Version: v1.0Release date: 2015-07-30Format: ESRI ShapefileGeometry type: polygonsNumber of features: 63Spatial Reference System: +proj=longlat +ellps=WGS84 +datum=WGS84 +no_defsDistribution file: "EMCA_seismozonesv1.0_nrml.zip"Version: v1.0Release date: 2015-07-30Format: NRML (XML) Format compatible with the GEM OpenQuake platform (http://www.globalquakemodel.org/openquake/about/platform/)Feature attributes:src_id : Id of the seismic sourcesrc_name : Name of the seismic sourcetect_reg: Tectonic regime of the seismic sourceupp_seismo : Upper level of the the seismogenic depth (km)low_seismo : Lower level of the seismogenic depth (km)mag_scal_r: Magnitude scaling relationshiprup_asp_ra: Rupture aspect ratiomfd_type : Magnitude frequency distribution typemin_mag: Minimum magnitude of the magnitude frequency relationshipmax_mag: Maximum magnitude of the magnitude frequency relationshipa_value: a value of the magnitude frequency relationshipb_balue : b value of the magnitude frequency relationshipnum_npd: number of nodal plane distributionweight_1 : weight of 1st nodal plane distributionstrike_1: Strike of the seismic source (degrees)rake_1: rake of the seismic source (degrees)dip_1: dip of the seismic source (degrees)num_hdd: number of hypocentral depth distributionhdd_d_1: Depth of 1st hypocentral depth distribution (km)hdd_w_1: Weight of 1st hypocentral depth distribution

Description: Abstract

Description: Strong earthquakes cause transient perturbations of the near Earth’s surface system. These include the widespread landsliding and subsequent mass movement and the loading of rivers with sediments. In addition, rock mass is shattered during the event, forming cracks that affect rock strength and hydrological conductivity. Often overlooked in the immediate aftermath of an earthquake, these perturbations can represent a major part of the overall disaster with an impact that can last for years before restoring to background conditions. Thus, the relaxation phase is part of the seismically induced change by an earthquake and needs to be monitored in order to understand the full impact of earthquakes on the Earth system. Early June 2015, shortly after the April 2015 Mw7.9 Gorkha earthquake, we installed an array of 12 seismometers and geophones and 6 weather stations in the upper Bhotekoshi catchment, covering an area of ~50 km2. The seismic network was optimized for the monitoring of Earth surface processes (landsliding, mass wasting river processes, debris flows) and for the monitoring of properties of the shallow subsurface by coda analysis. To achieve the latter aim and to probe different scales and depths, seismometers were installed with inter-station distances from about 80m to 9km. In particular, in each of two locations close to the Bhotekoshi river, three seismometers were installed in small arrays with inter-station distances of about 100m. The seismic array is part of a wider data acquisition strategy including hydrometric measurements and high resolution optical (RapidEye) and radar imagery (TanDEM TerraSAR-X). Waveform data is available from the GEOFON data centre, under network code XN.

Description: Abstract

Description: The TOMO-ETNA experiment was focused on the base of generation and acquisition of seismic signal (active and passive) at Mt. Etna volcano and surrounding area. The terrestrial campaign consists in the deployment of 80 short-period three-component seismic stations (June 15 to July24), 17 Broadband seismometers (June 15 to October 30) provided by Helmholtz Centre Potsdam (GFZ) German Research Centre for Geosciences using the German Geophysical Instrument Pool Potsdam (GIPP Gerätepool Geophysik), and the coordination with 133 permanent seismic station belonging to the “Istituto Nazionale di Geofisica e Vulcanologia” (INGV) of Italy. This temporary seismic network recorded active and passive seismic sources. Active seismic sources were generated by an array of air-guns mounted in the Spanish Oceanographic vessel “Sarmiento de Gamboa” with a power capacity of up to 5.200 cubic inches. In total more than 26.000 shots were fired and more than 450 local and regional earthquakes were recorded. Until July the Oceanographic Vessel “Sarmiento de Gamboa” and the hydrographic vessel “Galatea” were responsible for the offshore activities, that included deployment of OBSs, and several marine activities. The vessel “Aegaeo” performed additional seismic, magnetic and gravimetric experiments until the end of November 2014. This experiment was part of the “Task 5.3 - Mt. Etna structure” of the “EU MED-SUV Project” concerned with the investigation of Mt. Etna volcano (seismic tomography experiment - TOMO-ETNA) by means of passive and active refraction/reflection seismic methods. It focused on the investigation of Etna’s roots and surrounding areas by means of passive and active seismic methods. Therefore, this experiment included activities both on-land and offshore with the main objective to obtain a new high-resolution tomography in order to improve the 3D image of the crustal structures existing beneath the Etna volcano and the northeast Sicily (Peloritani - Nebrodi chain) up to the Aeolian Islands. Waveform data are open and available from the GEOFON data centre, under network code 1T.

Description: The upper air soundings are normally performed once a day to measure vertical profiles of air pressure, temperature, relative humidity and the wind vector. Helium filled balloons (TOTEX 600 g, 800 g) were used to carry Vaisala RS92-SGPW radiosondes. Whenever possible, the launches were performed about 10 UTC. Condensed measurements (TEMP Format FM-35) were transferred without delay into the Global Telecommunication System GTS were they contribute for the world wide weather forecasts. The profile data were taken every 5-10 seconds which result in a vertical profile resolution of about 25-50 meter. The profiles start at the helideck 10 m above sea level and terminate at the burst level of the balloons, normally at heights between 25 and 37 km.

Description: Due to its strong influence on heat and moisture exchange between the ocean and the atmosphere, sea ice is an essential component of the global climate system. In the context of its alarming decrease in terms of concentration, thickness and duration, understanding the processes controlling sea-ice variability and reconstructing paleo-sea-ice extent in polar regions have become of great interest for the scientific community. In this study, for the first time, IP25, a recently developed biomarker sea-ice proxy, was used for a high-resolution reconstruction of the sea-ice extent and its variability in the western North Pacific and western Bering Sea during the past 18,000 years. To identify mechanisms controlling the sea-ice variability, IP25 data were associated with published sea-surface temperature as well as diatom and biogenic opal data. The results indicate that a seasonal sea-ice cover existed during cold periods (Heinrich Stadial 1 and Younger Dryas), whereas during warmer intervals (Bølling-Allerød and Holocene) reduced sea ice or ice-free conditions prevailed in the study area. The variability in sea-ice extent seems to be linked to climate anomalies and sea-level changes controlling the oceanographic circulation between the subarctic Pacific and the Bering Sea, especially the Alaskan Stream injection though the Aleutian passes.

Description: FIL2013: Polar 6 conducted a systematic digital photographic aerial survey of the area of the Filchner Outflow System during two survey flights from Halley VI on 15 and 16 November 2013. The total survey distance covered 3,000 km each on 15 (eastern section) and 16 (western section) November 2013. Due to a low cloud ceiling on 15 November, the first flight operation was terminated prematurely and thus the westernmost track could not be flown. This track was flown on 16 November, and the total number of tracks numbered 11 instead of 12 as had been planned originally. FIL2014: Visual surveys of pack ice seals using helicopters were conducted from 4 January to 9 February 2014 from aboard RV Polarstern (PS82). For all seal related operations (including deployments of satellite transmitte rs and reconnaissance flights) a total of 30:13 hours during 20 flights were flown (MIN 0:11; MAX 3:13). The survey region was sampled by flying systematically spaced line transects (parallel lines approximately 10 nm apart) whenever ship position and weather conditions allowed, with out clustering transects in areas of easier access. When a full transect length could not be flown on a day, we attempted to complete (extend) the particular transect on a following day.

Description: This work aimed to explore evaluated the effects of the increased of hydrostatic pressure on a defined bacterial community on aggregates formed from an axenic culture of marine diatoms by simulating sedimentation to the deep sea by increase of hydrostatic pressure up to 30 bar (equivalent to 3000 m water depth) against control at ambient surface pressure. Our hypothesis was that microbial colonization and community composition and thus microbial OM turnover is greatly affected by changes in hydrostatic pressure during sinking to the deep ocean.

Description: The dataset provides detailed information on the study that was conducted in Lahore's 7 major towns. The sample was taken from 472 tubewells and analyzed for major cations and anions using APHA 2012 techniques as explained herein. Besides, E.coli determination was done to check for microbial contamination. The data includes results from PHREEQC modeling of As(III)/ As(V) species and saturation indices as well as Aquachem's computed hydrochemical water facies. The WHO (2011) and EPA standards included in Aquachem identified the parameters that where in violation. Bicarbonates dominated the groundwater types with 50.21% of the samples exceeding the EPA maximum permissible limit of 250 mg/L in drinking water. Similarly, 30.51% of the samples had TDS values greater than 500 mg/L while 85.38 % of the samples exceed 10 µg/L threshold limit value of arsenic. Also, instances of high magnesium hazard values were observed which requires constant assessment if the groundwater is used for irrigation. Higher than 50% MH values are detrimental to crops which may reduce the expected yields. The membrane filtration technique using m-Endo Agar indicated that 3.59% samples had TNC (too numerous to count) values for E.coli while 5.06% showed values higher than 0 cfu/ 100 ml acceptable value in drinking water. Any traces of E-coli in a groundwater sample indicate recent fecal contamination. Such outcomes signify presence of enteric pathogens. If the groundwater is not properly dosed with disinfectants it may cause harm to human health. It is concluded that more studies are needed and proper groundwater management implement to safeguard the lives of communities that depend solely on groundwater in the city.